WP-2000-OMTB
8650 Enterprise Drive, Peosta IA 52068
319-556-7484 / Fax 319-556-1235
PARTS LIST FOR
WP-2000-0MTB
Engine Oil Grade:
Engine Oil Capacity:
Pump Oil Grade:
Pump Oil Capacity (Sealed):
Nozzle Size:
©Copyright Mi-T-M Corporation® 2000
1
ABOVE 40°F=SAE30
BELOW 40°F=SAE10W-30
20 oz.
Mi-T-M Pump Oil #AW-4085-0016
3.53 oz.
3.5
EX-9060-070500R1
Issue Date: 010198
This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M Cold Water Pressure Washer was constructed and designed with quality
and performance in mind using over 25 years experience in the pressure washer business. Each component has been rigorously tested to insure the highest level
of acceptance.
The contents of this Parts Listing are based on the latest product information available at the time of publication. Mi-T-M reserves the right to make changes in
price, color, materials, equipment, specifications or models at any time without notice.
WARNING
THIS IS A PROFESSIONAL HIGH PRESSURE, COLD WATER PRESSURE WASHER. CAUTION SHOULD BE OBSERVED WHEN USING
OR REPAIRING THIS UNIT! READ AND FOLLOW THE SAFETY WARNINGS LISTED BELOW BEFORE ATTEMPTING ANY REPAIRS ON
THIS PRESSURE WASHER!
1.
SAFETY WARNINGS
NEVER alter or modify the equipment. Be sure any accessory items and system components being used will withstand the pressure developed. Use
only genuine Mi-T-M parts for repair of your pressure washer. Failure to do so can cause hazardous operating conditions and will VOID warranty.
2.
NEVER make adjustments on machinery while the unit is connected to the engine without first removing the ignition cable from the spark plug.
Turning over the machinery by hand during adjustment or cleaning might start the engine and machinery with it, causing serious injury to the operator.
3.
Know how to stop and bleed pressures quickly. Be thoroughly familiar with controls.
4.
Before servicing the unit, turn unit off, relieve the water pressure and allow the unit to cool down. Do not make repairs while the unit is running.
Service in a clean, dry, flat area. Block the wheels to prevent the unit from moving. Be especially careful to properly dispose of any flammable materials.
5.
After testing the machine, DO NOT leave the pressurized unit unattended. Shut off the unit and release trapped pressure before leaving.
Table of Contents
SPECIFICATIONS ................................................................................................................................................................................................................................ 3
FRAME ASSEMBLY FOR WP-2000-0MTB ......................................................................................................................................................................................... 4
PUMP ASSEMBLY (3-0153) ................................................................................................................................................................................................................ 6
GUN ASSEMBLY (16-0190) ................................................................................................................................................................................................................ 8
NOTES ............................................................................................................................................................................................................................................... 10
©Copyright Mi-T-M Corporation® 2000
2
EX-9060-070500R1
Issue Date: 010198
SPECIFICATIONS
WP-2000-0MTB
MODEL NUMBER
Operating Pressure (PSI/Bar):
High Pressure Nozzle:
Water Volume (GPM/lpm):
Engine:
Horsepower
Engine Type
Oil Type
Oil Capacity (oz./liters)
Fuel Type
Fuel Capacity (gallon/ liters)
Starting
Maximum No Load RPM
Pump:
Oil Type
Oil Capacity (oz./liters)
Plungers
Manifold
Valves
Unloader
Heat Dump Valve
Detergent Injector
Unit Net Weight (lbs/Kg)
Unit Shipping Weight (lbs/Kg)
Unit Net Dimension (in/cm)
Unit Shipping Dimension (in/cm)
©Copyright Mi-T-M Corporation® 2000
WP-2000-0MTB
2000/137.9
3.5
2.5/9.5
Tecumseh
5.0
4 Stroke, Overhead Valve, Single Cylinder
Above 40 F=SAE30/Below 40 F=SAE10W-30
20/.6
Unleaded Gasoline 86 Octane Minimum
.75/2.9
Recoil
3600 (+/- 100) RPM
Direct Driven, Oil Bath, Triplex Piston
Mi-T-M Pump Oil #AW-4085-0016
3.53/.10
Stainless Steel
Forged Brass
Stainless Steel
Adjustable
Relieves heated water during unloader bypass stage
Adjustable low pressure down stream from pump
72/32.5
84/38
30Lx21Wx26H/ 76Lx53.5Wx66H
30.5Lx21.5Wx26.5H/77.5Lx54.5Wx67.5H
3
EX-9060-070500R1
Issue Date: 010198
FRAME ASSEMBLY FOR WP-2000-0MTB
000
WP-2000-0MTB-052200-RD
2
©Copyright Mi-T-M Corporation® 2000
4
EX-9060-070500R1
Issue Date: 010198
WP-2000-0MTB-052200-RD
FRAME ASSEMBLY FOR WP-2000-0MTB
REF. #
DESCRIPTION
PART #
QTY.
REF. #
DESCRIPTION
PART #
QTY.
1
Decal- Die Cut 2000
34-0771
1
26
Heat Dump Valve
22-0114
1
2
Decal- Warning/Caution/Operation (E/S)
34-0737
1
27
Nut
30-0004
4
3
Decal- American Flag
34-0521
1
28
Lockwasher
29-0007
4
4
Grommet
33-0001
5
29
Stud
27-8889
4
5
Frame
5-0123A20
1
30
Key
43-0073
1
6
Isolator
14-0066
2
31
Nozzle- 1503.5
18-0258
1
7
Washer
28-0021
2
-
Nozzle- 2503.5
18-0259
1
8
Screw
27-3096
2
-
Nozzle- 6540
18-0148
1
9
Decal- Serial Number
N/A
1
32
Detergent Strainer
19-0050
1
10
Decal- Data Plate
N/A
1
33
Detergent Hose *(Four Feet Required)
15-0021
1
11
Decal- Clear Laminate
N/A
1
34
Pressure Hose
15-0169
1
12
Decal- Technical Service Number
34-0603
1
35
Gun/Wand Assembly (Inc. 37-42)
851-0245
1
13
Axle Spacer
20-0313A01
2
36
Gun Assembly
16-0190
1
14
Washer
28-0008
5
37
Protective Cover
62-0091
1
15
Wheel
14-0080
2
38
Insulated Lance
16-9001
1
16
Hubcap
33-0018
2
39
Hand Wheel
16-0303
1
17
Bolt
27-0070
4
40
Plug
23-0267
1
18
Washer
28-0003
8
41
O-ring
25-0291
1
19
Support Brace
13-0119A20
1
42
Lance Assembly (Inc. 44-46)
851-0292
1
20
Locknut
30-0157
4
43
Adapter
23-0266
1
21
Engine- 5.0 H.P. Tecumseh
1-0097
1
44
Insulated Lance
16-9003
1
22
Decal- Warning: Muffler Hot (E/S)
34-0598
1
45
Quick Connect Socket
17-0001
1
23
Decal- Caution: Allow to Cool (E/S)
34-0599
1
46
O-ring (Replacement)
25-0122
-
24
Filter
19-0001
1
25
Pump
3-0153
1
©Copyright Mi-T-M Corporation® 2000
*Must Order in One Foot Lengths
5
EX-9060-070500R1
Issue Date: 010198
3-0153-062700-RD
PUMP ASSEMBLY (3-0153)
©Copyright Mi-T-M Corporation® 2000
6
EX-9060-070500R1
Issue Date: 010198
3-0153-062700-RD
PUMP ASSEMBLY (3-0153)
REF #
DESCRIPTION
PART #
QTY
REF #
DESCRIPTION
PART #
QTY
REF #
DESCRIPTION
PART #
QTY
1
Gasket
46-0779
1
26
O-ring (See 70-0190)
N/A Sep.
3
56
O-ring
25-0230
1
2
Vent Extension
46-0748
1
27
Back-up Ring (See 70-0190)
N/A Sep.
3
57
Roll Pin
46-0364
1
3
Oil Vent Assembly (Includes 3A-3E)
46-0634
1
28
Pressure Seal (See 70-0190)
N/A Sep.
3
58
Piston By-pass Valve (See 70-0215)
N/A Sep.
1
3A
Oil Vent Piston
N/A Sep.
1
29
O-ring
25-0359
6
59
O-ring
25-0242
1
3B
O-ring
25-0230
1
30
Valve Complete (See 70-0191 Inc. 26-29)
N/A Sep.
6
60
Back-up Ring
25-0246
1
3C
Oil Vent Cage
N/A Sep.
1
31
Valve Seat - Plastic
N/A Sep.
6
61
O-ring
25-0231
1
3D
O-ring
N/A Sep.
1
32
Valve Plate - Stainless Steel
N/A Sep.
6
62
Body Bypass Valve
8-0470
1
3E
Oil Vent Spring
N/A Sep.
1
33
Valve Spring - Stainless Steel
N/A Sep.
6
63
Pressure Regulating Spring-2000 PSI
49-0131
1
4
Oil Seal (See 70-0214)
N/A Sep.
1
34
Valve Cage - Plastic
N/A Sep.
6
64
Pressure Regulating Screw
8-0471
1
5
Flange Bushing (See70-0214)
N/A Sep.
1
35
Washer Shim
46-0745
3
65
Spring Clip
25-0245
1
6
Flange
46-0777
1
36
Pump Head - Brass
46-0658
1
66
Pressure Regulating Knob
7-0133
1
7
Thrust Washer
48-0056
3
37
Screw
27-8892
5
67
Screw
27-8859
1
8
Thrust Needle Roller Bearing
48-0057
2
38
Banjo Fitting - Brass
46-0637
1
68
Screw
27-8860
1
9
Wobble Plate - 10
46-0778
1
39
O-ring (See 70-0102)
N/A Sep.
1
69
Injector Body - Plastic
46-0360
1
10
Wobble Plate Plug
39-0082
1
40
Detergent Injector Body
46-0636
1
70
O-ring
25-0362
1
11
Thrust Washer
48-0064
1
41
O-ring
25-0341
1
71
Injector Nozzle - Brass
46-0356
1
12
O-ring
25-0358
1
42
Detergent Injector Hose Barb
46-0638
1
72
Check Valve Spring
49-0130
1
13
Oil Sight Glass
46-0735
1
43
O-ring (See 70-0102
N/A Sep.
2
73
Check Valve - Plastic
22-0158
1
14
O-ring
25-0420
1
44
Detergent Injector Ball (See 70-0102)
N/A Sep.
1
74
O-ring
25-0334
1
15
Garden Hose Adapter
23-0305
1
45
Detergent Injector Spring (See 70-0102)
N/A Sep.
1
75
O-ring
25-0357
1
16
Garden Hose Connection
23-0304
1
46
Bolt
27-8893
4
76
Screw
27-8894
1
17
Pump Housing
46-0746
1
47
Pump Manifold - Brass
46-0743
1
Flange Assembly (Includes 4-6)
70-0214
18
Piston Spring Retainer
46-0663
3
48
Screw
27-8868
1
Packing Kit (Includes 3 ea. 26-28)
70-0195
19
Piston-Stainless Steel
46-0664
3
49
O-ring
25-0263
5
Valve Kit (Includes 29, 30)
70-0191
20
Piston Spring
49-0129
3
50
U-Clip
46-0741
1
Unloader Check Valve Kit (Inc. 53, 68-73)
70-0108
21
Bolt
27-8870
3
51
Valve Seat Plate
46-0686
1
Unloader Seat Kit (Includes 51-54)
70-0192
22
Gasket
26-0168
1
52
Ball - Stainless Steel
46-0685
1
Unloader Stem Kit (Inc. 39, 49, 55-64, 67)
70-0215
23
Plug
39-0098
1
53
O-ring
25-0248
2
Injector Repair Kit (Inc. 39, 43-45)
70-0102
24
Oil Seal
26-0195
3
54
Ball Seat
46-0352
1
Manifold Assy. (Inc. 3B, 38-40, 43-45, 47-75)
70-0216
25
Packing Retainer - Brass
46-0737
3
55
Back-up Ring
25-0247
1
©Copyright Mi-T-M Corporation® 2000
7
EX-9060-070500R1
Issue Date: 010198
16-0190-110399-RD
GUN ASSEMBLY (16-0190)
©Copyright Mi-T-M Corporation® 2000
8
EX-9060-070500R1
Issue Date: 010198
16-0190-110399-RD
GUN ASSEMBLY (16-0190)
REF. #
DESCRIPTION
PART #
1
Screw
27-8382
7
2
Plastic Housing (Left Side)
16-0336
1
3
Housing-Brass
23-0295
1
4
Pipe
21-0095
1
5
Nipple
23-0173
1
6
Trigger Safety Lock
16-0332
1
7
Trigger Rest
16-0333
1
8
Trigger
16-0335
1
9
Trigger Pin
43-0069
1
10
Plastic Housing (Right Side)
16-0334
1
11
Plug (See 70-0057)
N/A Sep.
1
12
O-ring (See 70-0057)
N/A Sep.
1
13
Spring (See 70-0057)
N/A Sep.
1
14
Ball (See 70-0057)
N/A Sep.
1
15
Seat (See 70-0057)
N/A Sep.
1
16
O-ring (See 70-0057)
N/A Sep.
1
17
Pin (See 70-0057)
N/A Sep.
1
18
Washer (See 70-0057)
N/A Sep.
1
19
O-ring (See 70-0057)
N/A Sep.
1
20
Back-up Ring (See 70-0057)
N/A Sep.
1
Repair Kit (Includes 11-20)
©Copyright Mi-T-M Corporation® 2000
QTY.
70-0057
9
EX-9060-070500R1
Issue Date: 010198
NOTES
©Copyright Mi-T-M Corporation® 2000
10
EX-9060-070500R1
Issue Date: 010198
NOTES
©Copyright Mi-T-M Corporation® 2000
11
EX-9060-070500R1
Issue Date: 010198
©Copyright Mi-T-M Corporation® 2000
12
EX-9060-070500R1
Issue Date: 010198
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement