Mark 65 Series Vacuum Regulators Pressure Regulat

Mark 65 Series Vacuum Regulators Pressure Regulat
Pressure Regulators
Mark 65 Series
Vacuum Regulators
Jordan vacuum regulators control very accurately and
shutoff tightly to maintain the proper vacuum setting.
They are used to maintain vacuums at predetermined
settings and to regulate vacuums on evaporators, cookers, grinding fixtures, milking machines, altitude chambers and other vacuum systems.
Features
•
•
•
Sliding gate seats provide:
—— Straight-through flow for reduced turbulence
and quiet operation
—— Short stroke for fast response and accurate
regulation
—— Easily interchangeable Cv’s
—— Tight shutoff
All metal-to-metal contacts — no gaskets, o-rings
or elastomer parts to wear out
Compact design & simple construction — allows
fast, simple installation and easy maintenance
Operation
Process Under Vacuum
Flow
Flow
Mark 65 as
Modulating
Vacuum Breaker
The Mark 65 is normally up and closed. The higher
vacuum acts beneath the diaphragm, and lowers the
diaphragm on increase in vacuum to open the valve;
a decrease in vacuum raises the diaphragm to close
the valve. To adjust the set point, the adjusting screw
is turned clockwise to increase the vacuum or counterclockwise to decrease the vacuum.
Sizes: 1/2” (DN15) through 2” (DN50)
(Note: 1/4” (DN8) & 3/8” (DN12) use 1/2” (DN15) body
with reducer bushings)
End Connections:
•
Threaded — FNPT, BSPT, BSPP
•
ANSI Flanges — 150#, 300#
•
DIN Flanges — PN10/16, PN25/40
Body Materials:
•
Ductile Iron — SA-395
•
Bronze — SB-61
•
Carbon Steel — SA-216 WCB
•
Stainless Steel — SA-351 CF8M
Trim Materials:
•
303 SS for DI, BRZ & CS body valves
•
316SS for SS body valves
Seat Materials:
•
Jorcote on SST — Standard
•
Jorcote on SST — For severe service
•
Chrome Plated SST — Optional
Diaphragm Materials:
•
Stainless Steel
•
Buna-N
•
Viton
•
Jorlon
Jordan Valve, a division of Richards Industries
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.jordanvalve.com
Mark 65 Vacuum Regulators
Higher
Pressure
Source
Specifications
Mark 65 Vacuum Regulators
Specifications (Cont'd)
Spring Housing Materials: Cast Iron or Ductile Iron
Low Flow Cv’s (Kv’s) Available
Service: Steam, water, oil, gas, air and chemicals
Reduced Cv’s (Kv’s) can be used in a valve of any size
so long as the required Cv (Kv) is a smaller value than the
standard for that particular size. In addition, the following
Cv (Kv) values can be provided:
Shutoff: ANSI Class IV
Vacuum Control Ranges: 1” Hg to 25” Hg vacuum
Cv (Kv) Values & Maximum Differential Pressure
Flow Coef.*
Seat
Material
Valve Size (DN)
Maximum ∆P
Cv
Kv
PSI
BAR
2.5 or
4.4
2,15 or
3,78
1/2" & 3/4"
(DN15 & DN20)
SST
50
3,4
Jorcote
200
13,8
6.4 or
9.5
5,50 or
8.17
1" & 1-1/4"
(DN25 & DN32)
SST
50
3,4
Jorcote
200
13,8
15
12,9
1-1/2" (DN40)
25 or
30
21,5 or
25,8
2" (DN50)
SST
30
2,1
Jorcote
150
10,34
SST
30
2,1
Jorcote
150
10,34
1.6
(1,4)
0.84
(0.72)
0.42
(3,36)
0.21
(0,18)
0.02
(0,017)
0.008
(0,007)
0.004
(0,003)
0.002
(0,0017)
0.08
(0,07)
0.04
(0,03)
0.0008 (0,0007)
(N/A in 316SS)
Maximum Working Pressures & Temperatures
Maximum Pressure @ 100ºF, PSI/ºF
Bolt
Diaph.
Std.
Dbl.
DI Body
BRZ Body
CS Body
SST Body
150#
300#
TE
150#
300#
TE
150#
300#
TE
150#
300#
TE
S6
250/100
600/100
300/100
225/100
500/100
300/100
285/100
740/100
300/100
275/100
720/100
300/100
S6
250/100
600/100
600/100
225/100
500/100
500/100
285/100
740/100
950/100
275/100
720/100
950/100
Std.
BN
250/100
300/100
300/100
250/100
300/100
300/100
285/100
300/100
300/100
275/100
300/100
300/100
Std.
VIT
250/100
400/100
300/100
250/100
400/100
300/100
285/100
400/100
300/100
275/100
400/100
300/100
Std.
S6
125/650
450/650
300/650
150/500
325/500
300/500
125/650
535/650
300/650
125/650
445/650
300/650
Dbl.
S6
125/650
450/650
600/650
150/500
325/500
325/500
125/650
535/650
950/650
125/650
445/650
890/650
Std.
BN
235/200
300/200
300/200
215/200
300/200
300/200
260/200
300/200
300/200
240/200
300/200
300/200
Std.
VIT
235/450
300/450
300/450
160/450
300/450
300/450
185/450
300/450
300/450
180/450
300/450
300/450
Pressure at Maximum Temperature, PSI/ºF
Maximum Pressure @ 38ºC, BAR/ºC
Bolt
Diaph.
Std.
Dbl.
DI Body
BRZ Body
CS Body
SST Body
150#
300#
TE
150#
300#
TE
150#
300#
TE
150#
300#
TE
S6
17/38
41/38
21/38
16/38
34/38
21/38
20/38
51/38
21/38
19/38
50/38
21/38
S6
17/38
41/38
41/38
16/38
34/38
34/38
20/38
51/38
66/38
19/38
50/38
66/38
Std.
BN
17/38
21/38
21/38
17/38
21/38
21/38
20/38
21/38
21/38
19/38
21/38
21/38
Std.
VIT
17/38
28/38
21/38
17/38
28/38
21/38
20/38
28/38
21/38
19/38
28/38
21/38
Std.
S6
9/343
31/343
21/343
10/260
22/260
21/260
9/343
37/343
21/343
9/343
31/343
21/343
Dbl.
S6
9/343
31/343
41/343
10/260
22/260
22/260
9/343
37/343
66/343
9/343
31/343
61/343
Pressure @ Maximum Temperature, BAR/°C
Std.
BN
16/93
21/93
21/93
15/93
21/93
21/93
18/93
21/93
21/93
17/93
21/93
21/93
Std.
VIT
16/232
21/232
21/232
11/232
21/232
21/232
13/232
21/232
21/232
12/232
21/232
21/232
-2-
Mark 65 Vacuum Regulators
Dimensions
D
B
••
Flanged Ends
Dimensions (inches)
Size
ANSI
Flange
1/2"
A1
3/4"
••
Threaded Ends
Size
1/2" & 3/4"
1"
1¼"
1½"
2"
••
1"
Dimensions (inches)
A
B
C
D
Weight
(lbs.)
DI/BRZ
3.62
8.25
2.25
7.12
22
CS/SS
3.62
8.25
2.25
7.12
23
DI/BRZ
4.12
8.50
2.25
7.08
25
CS/SS
4.18
9.0
2.65
7.12
25
DI/BRZ
4.12
8.50
2.25
7.08
25
DI/BRZ
4.50
8.75
2.37
7.08
23
Material
CS/SS
4.81
9.25
2.65
7.08
26
DI/BRZ
4.50
9.00
2.50
7.08
26
CS/SS
5.50
9.25
2.75
7.08
35
1¼"
1½"
2"
••
Size (DN)
15 & 20
25
32
40
50
Material
DI/BRZ
A
B
C
D
Weight
(kg)
92
210
57
181
10,0
CS/SS
92
210
57
181
10,4
DI/BRZ
105
216
57
180
11,3
CS/SS
106
229
67
181
11,3
DI/BRZ
105
216
57
180
11,3
DI/BRZ
114
222
60
180
10,4
CS/SS
122
235
67
180
14,1
DI/BRZ
114
229
64
180
13,6
CS/SS
140
235
70
180
15,9
C
D
Size
(DN)
15
20
25
32
40
50
-3-
Weight
(lbs.)
CS/
SS
DI/
BRZ
CS/
SS
ALL
ALL
DI/
BRZ
CS/
SS
150#
7.25
7.25
8.25
8.25
2.25
7.12
24
25
300#
7.50
7.50
8.25
8.25
2.25
7.12
26
27
150#
7.25
7.25
8.25
8.25
2.25
7.12
26
27
300#
7.62
7.62
8.25
8.25
2.25
7.12
28
29
150#
7.25
7.25
8.50
9.00
2.65
7.12
29
29
300#
8.75
7.75
8.50
9.00
2.65
7.12
31
31
150#
7.87
—
8.50
—
2.25
7.08
29
—
300#
8.37
—
8.50
—
2.25
7.08
33
—
150#
8.75
8.75
8.75
9.25
2.65
7.08
34
37
300#
10.25
9.25
8.75
9.25
2.65
7.08
40
43
150#
10.00
10.00
9.00
9.25
2.75
7.08
40
45
300#
10.50
10.50
9.00
9.25
2.75
7.08
44
49
Flanged Ends, DIN
Dimensions (mm)
Threaded Ends, DIN
Dimensions (mm)
B
DI/
BRZ
C
A
A1
Flange
(PN)
A1
DI/
BRZ
B
CS/
SS
DI/
BRZ
CS/
SS
C
D
ALL
ALL
Weight (kg)
DI/
BRZ
CS/
SS
10/16
184
130
210
210
57
181
10,9
11,3
25/40
184
130
210
210
57
181
11,8
12,2
10/16
184
150
210
210
57
181
11,8
12,2
25/40
184
150
210
210
57
181
12,7
13,2
10/16
184
160
216
229
67
181
13,2
13,2
25/40
184
160
216
229
67
181
14,1
14,1
10/16
200
—
216
—
57
180
13,2
—
25/40
200
—
216
—
57
180
15,0
—
10/16
222
200
222
235
67
180
15,4
16,8
25/40
222
200
222
235
67
180
18,1
19,5
10/16
254
230
229
235
70
180
18,1
20,4
25/40
254
230
229
235
70
180
20,0
22,2
MK65/1215
Mark 65 Vacuum Regulators
Ordering Schematic
To specify a MK65 Series Vacuum Regulator, build a model number by making a selection from each category in the
product Designator Coding System below.
1
2
—
1
—
3
/
Model
65
4
5
7
8
9
5
Model
2
6
Size
Trim
S3
303SS
S6
316SS
I3
303SST for integral flanges (IFE)
I6
316SST for integral flanges (IFE)
Inches
DN
025
1/4"
DN8
038
3/8"
DN10
050
1/2"
DN15
A
075
3/4"
DN20
B
316SST
100
1"
DN25
V
303SS / Jorcote
125
1-1/4"
DN32
W
316SS / Jorcote
150
1-1/2"
DN40
X
303SST / Jorcote / Jordanic
200
2"
DN50
Y
316SST / Jorcote / Jordanic
3
Body Material
6
Seat Material
7
303SST
Cv (Kv)
DI
Ductile Iron
1
0.21 (0,18)
7
6.4 (5,52)
BR
Bronze
2
0.42 (0,36)
8
9.5 (8,19)
CS
Carbon Steel (WCB)
3
0.84 (0,72)
9
15.0 (12,93)
S6
Stainless Steel (CF8M)
4
1.6 (1,38)
A
25.0 (21,55)
5
2.5 (2,16)
B
30.0 (25,86)
6
4.4 (3,79)
4
End Connections
PT
NPT
BT
BSPT
BP
BSPP
01
1-20" Hg
SW
FSW
0B
1-25" Hg
I5
150# IFE CS or SST valves
I3
300# IFE CS or SST valves
F3
300# FE DI or BR
I7
PN10 IFE CS or SST valves
F7
PN10 FE DI or BR
I6
PN16 IFE CS or SST valves
F6
PN16 FE DI or BR
I8
PN25 IFE CS or SST valves
F8
PN25 FE DI or BR
I4
PN40 IFE CS or SST valves
F4
PN40 FE DI or BR
8
Range
9
Diaphragm
S6MD
316 SST
BNED
Buna-N
V1ED
Viton
JLED
Jorlon
Jordan Valve, a division of Richards Industries
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.jordanvalve.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement