OMNI1000ISO

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: [email protected]

Model #: OMNI1000ISO

OmniSmart Line Interactive UPS with built-in isolation transformer - Provides battery support during blackouts, voltage regulation during brownouts and continuous line filtering with built-in isolation transformer

Highlights

1000VA line interactive UPS with built-in isolation transformer

Maintains 120V nominal output over an input range of 81 to 143V

Built-in USB communications port

Input: NEMA 5-15P (120V 15A) / Output: 6 NEMA 5-15R (120V)

2 year product warranty

Description

Tripp Lite's OMNI1000ISO offers complete UPS protection with built-in line-interactive voltage regulation, intelligent monitoring and unattended shutdown capability. Built-in isolation transformer with Faraday shield offers full isolation and complete common mode noise rejection. 1000VA power-handling capacity supports point-of-sale applications, computers, internetworking equipment and home theater systems during commercial power failures. Line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V back to normal 120V levels, reserving battery power for use during complete power failures. Built-in USB communications port works with PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.

Package Includes

OMNI1000ISO UPS System

USB cable

Owner's manual with warranty information

Features

1000VA line-interactive UPS with Faraday-shielded, low-impedance isolation transformer delivers full isolation from potential damage and performance problems

Provides immunity from EMI/RFI line noise in both normal and common modes. Delivers clean signal-reference ground, reducing data errors and audio/video distortion

Automatic voltage regulation (AVR) automatically corrects incoming voltage to keep equipment working through low voltage (brownouts) as low as 81V and overvoltages as high as 143V without consuming battery power

Supports loads up to 1000VA/700W

Half-load runtime of 24 min. (500VA/350W); full load runtime of 8 min. (1000VA/700W)

5 diagnostic LEDs indicate AC present, on battery, voltage correction status, overload and battery low/replace

Electrostatic discharge (ESD) resistance reduces potential static damage to connected electronics

Built-in USB port and PowerAlert Software (free via web download) provide safe, unattended system shutdown during extended blackouts

Built-in surge suppression (backed by $200,000 Ultimate Lifetime Insurance ) safeguards connected equipment against damage

SURGE VOLTAGE WITHSTAND CAPABILITY: ANSI/IEEE C62.41 Catagories A & B 6KV/200/500 amp 100Khz Ringwave and category B

BiWave

SURGE VOLTAGE ATTENUATION: N-G 2000:1, L-G 240:1, L-N 100:1

INSERTION LOSS: 65 db N-G from 10Khz to 100Khz, 45 to 60 db L-G from 10Khz to 100Khz, 18 to 54 db L-N from 50Khz to 500 Khz

6 UPS-supported AC outlets; 6-ft. cord

2-year product warranty

Specifications

OUTPUT

Output Volt Amp

Capacity (VA)

Output kVA capacity

(kVA)

Output Watt Capacity

(watts)

Output power factor

Nominal Output

Voltage(s) Supported

1000

1

700

0.7

115V; 120V

Frequency compatibility

Output voltage regulation (line mode)

60 Hz

-18%, +8%

Output voltage regulation (Battery mode)

115V (+/- 5%)

6 5-15R outlet(s) Built-in UPS output receptacles

Basic PDU options

Metered PDU options

PDU1215 (1U / 13 5-15R outlets); PDUNV (1U / 2 C19, 12 C13 outlets); PDU1415 (0U / 14 5-15R outlets);

PDUV15 (0U / 12 5-15R outlets)

PDUMH15 (1U / 13 5-15R outlets); PDUMH15 AT (1U / 8 5-15R outlets)*; PDUMV15 (0U / 16 5-15R outlets)

Switched PDU options

External PDU redundancy options

Output AC waveform (AC mode)

Output AC waveform

(battery mode)

INPUT

Rated input current (at maximum load)

PDUMH15ATNET (1U / 8 5-15R outlets)*; PDUMV15NET (0U / 16 5-15R outlets)

*Auto Transfer Switch features utilizing the secondary PDU input cord are compatible with Smart Online UPS models only

Sine wave

PWM sine wave

7.6A

120V AC Nominal Input Voltage(s)

Supported

UPS input connection type

UPS Input cord length

(ft.)

UPS Input cord length

(m)

Recommended Electrical

Service

BATTERY

5-15P

6

1.8

15A 120V

Full load runtime

(minutes)

Half load runtime

(minutes)

8 min. (700w)

24 min. (350w)

DC system voltage (VDC) 36

Battery recharge rate

(included batteries)

Less than 4.5 hours from 10% to 90%

Replacement battery cartridge (internal UPS battery replacement)

RBC53

Battery Access

Battery replacement description

VOLTAGE REGULATION

Voltage regulation description

Battery access door

Hot-swappable, user replaceable batteries

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 85 to 143

Overvoltage correction

Undervoltage correction

Input voltages between 128 and 143V are reduced by 9%

Input voltages between 96 and 107V are boosted by 10%

Severe undervoltage correction

Input voltages between 85 and 95V are boosted by 20%

LEDS ALARMS & SWITCHES

LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

Alarms

Alarm cancel operation

EMI / RFI AC noise suppression

ISOLATION

Output isolation transformer

Audible alarm indicates power-failure and low-battery conditions

Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status

Switches 2 Switches control off/on power status and alarm-cancel/self-test operation

SURGE / NOISE SUPPRESSION

UPS AC suppression joule rating

510

UPS AC suppression response time

Instantaneous

Yes

Professional grade load isolation transformer

Surge voltage withstand capability

ANSI/IEEE C62.41 Categories A & B 6KV/200/500 amp 100Khz Ringwave and category B BiWave

Surge voltage attenuation N-G 2000:1, L-G 240:1, L-N 100:1

Insertion loss 65 db N-G from 10Khz to 100Khz, 45 to 60 db L-G from 10Khz to 100Khz, 18 to 54 db L-N from 50Khz to 500

Khz

PHYSICAL

Installation form factors supported with included accessories

Tower

Installation form factors supported with optional accessories

Primary form factor

UPS / Power Module dimensions in primary form factor (height x width x depth / inches)

UPS / Power Module dimensions in primary form factor (height x width x depth / cm)

UPS / Power Module weight (lbs)

UPS / Power Module weight (kg)

Wallmount (use

Tower

12.8 x 7.5 x 9.2

32.4 x 19 x 23.5

36.4

16.5

UPSWM - tower mounting kit)

UPS Shipping dimensions (height x width x depth / inches)

UPS Shipping dimensions (height x width x depth / cm)

Shipping weight (lbs)

Shipping weight (kg)

UPS housing material

Cooling method

ENVIRONMENTAL

Operating Temperature

Range

Storage Temperature

Range

Relative Humidity

AC mode BTU / hr. (full load)

18.2 x 13.8 x 12

46.4 x 34.9 x 30.5

40

18.2

PVC

Fan

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

0 to 95%, non-condensing

235.4

Battery mode BTU / hr.

(full load)

COMMUNICATIONS

Communications interface

PowerAlert software

324.5

USB

Low voltage transfer to battery power (setpoint)

Free download from www.tripplite.com

Communications cable USB cable included

WatchDog compatibility

LINE / BATTERY TRANSFER

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Transfer time 2-4 milliseconds

81

High voltage transfer to battery power (setpoint)

SPECIAL FEATURES

Cold Start (startup in battery mode during a power failure)

High availability UPS features

CERTIFICATIONS

UPS Certifications

143

Cold-start operation supported

Hot swappable batteries

Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A

(EMI); ROHS (Reduction of Hazardous Substances)

WARRANTY

Product Warranty Period

(U.S., Canada & Puerto

Rico)

Connected Equipment

Insurance (U.S., Canada

& Puerto Rico)

2 years

$200,000 connected equipment insurance

Related Items

Optional Products

Product Type

Wallmount Bracket

Extended Warranties

Extended Warranties

Related Model

UPSWM

WEXT3-OMNI

WEXT5-OMNI

Description

Wallmount Bracket and installation accessories (4 washers, 4 screws,

1 Velcro safety strap)

3-Year Extended Warranty - For OmniSmart, OmniPro, OmniVS

5-Year Extended Warranty - For OmniSmart, OmniPro, OmniVS

More information, including related products, owner's manuals, and additional technical specifications, can be found online at www.tripplite.com/en/products/model.cfm?txtModelID=3196 .

Qty.

-

-

-

Copyright © 2010 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.