CYP | CH-1106RX | Specifications | CYP CH-1106RX Specifications

PU-O4H4C
4 by 4 HDMI V1.3
over CAT 6 Matrix with IR
Return Control
Operation Manual
PU-O4H4C
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:







Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No
V1
Date
20091001
Summary of Change
Preliminary Release
Table of Contents
1. Introduction.....……………………..…………………................................ 1
2. Applications...........................…..…………………………………….....…
1
3. Package Contents..............................……………………………….……. 1
4. System Requirements.............................……………………………..…… 1
5. Features................................…..…………………………………...……….. 2
6. Specifications.......................................................................................... 3
7. Operation Controls and Functions.....................……...……...………….. 4
7.1. Front Panel......................…………………………………...………….. 4
7.2. Rear Panel.......................…………………………………...………….. 4
8. Remote Control.......................…..……………………………...………….. 6
9. RS-232 Protocol.......................…………..……………………...………….. 6
9.1 Pin Definitions................…………..……………...……...………......….. 6
9.2 Commands................…………………….……………...……….....….. 7
9.3. IR Cable Pin Definitions................………….……………...……....….. 8
10. 3.5Ø Connectors Pin Definitions............................................................. 8
10.1 IR IN Pin Definitions...........…………..……………………..……….….. 8
10.2 IR OUT Pin Definitions..........………………….…………….………….. 8
10.3 RJ-45 Pin Definitions...………….……………...………..................….. 8
11. Connection and Installation................................................................... 9
12. Acronyms................................................................................................. 10
1. Introduction
This HDMI over CAT6 Matrix is a high performance equipment with remote
control, IR blaster and receiver. It is compatible with HDMI v1.3 specifications, a
cutting-edge technology which defines support for Deep Color (12 bits/color)
video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio) digital audio. It offers you the maximum convenience
in HDMI signal distribution, when you need to have multiple HDMI sources and
displays connected together. Each of the four HDMI sources can be directed
to any one of the four HDMI displays, so each display can show a different
source. When HDMI signal progresses through the system, it is re-timed, and
level-compensated. Furthermore, Since signal is transferred over CAT 6, the
distance can be extended over a long range (>50m at 1080p 8 bits) yet at
a very low cost. CAT 6 connection can also be built with cascaded function
with other devices to enjoy real time play and no signal loss. Moreover, with
four induviduals output IR blaster systems users can easily control the input
source by the existing remote controls.
2. Applications
 Multi-source with multi-display control
 Home entertainment integration
 Multi-task project presentation
 Showroom Display
 Advertising Display control
 System installation control
3. Package Contents
 4 by 4 HDMI V1.3 Matrix
 Remote Control (with Battery)
 1 x IR Receiver
 5 x IR Blaster
 5V DC Power Supply Adaptor
 Power Cord
 Operation Manual
4. System Requirements
 Input source equipment with HDMI cable(s).
 Output source equipment(s) with HDMI cable(s) and CAT 6 to HDMI
receiver(s).
1
5. Features
 HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
 Supports digital video formats in Deep Color Mode of up to 36 bits (12bits/
color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio) digital audio
 HDMI input compensation, clock / phase adjustments, and jitter
eliminated guaranteed to output a brand new standard HDMI signal
 Supports input source LED indicators on each output select
 Compatible with all HDMI sources and displays
 Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p






Supports RS-232 control
Supports IR remote control with IR extender and blaster
Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate)
Supports CAT 6 cables of variable types
Defines HDCP, HDMI and DVI source via LED light
Supports high definition resolution, the cable distance test at 1080p/8
or 12 bits resolution: input & output sources max. distance up to 15
meters
Notes:
A. Cable used during testis CAT-6E / 23AWG / Solid and therefore, cables of
different specification may have different distance results.
B. Cable distance test equipment used: PS3 20G, 37" Philips 8 bit LCD TV and
37" SamSung 12 bit LCD TV.
C. Figures provided in this manual are for reference use only, actual figures
very depending on source and display used with cable specification.
2
6. Specifications
Frequency Bandwidth
Input Ports
Output Ports
EDID
ESD Protection
HDMI Audio Output
HDMI Cable In
HDMI Cable Out
CAT 6 Cable Out
Color Space
IR IN/OUT
Deep Color
HDMI Resolution
DVI Resolution
Power Supply
Dimensions (mm)
Weight(g)
Chassis Material
Silkscreen Color
Operating Temperature
Storage Temperature
Relative Humidity
Power Consumption
2.25Gbps (single link)
4 x HDMI female ports,
4 x Video/DDC CAT 6 ports
Standard, TV/Moving Port 1
Human body model: ± 10kV (air-gap discharge)
± 6kV (contact discharge)
PCM2, PCM5.1, PCM7.1, Dolby5.1, DTS5.1, DD+,
D-TrueHD, and DTS-HD
1080p 8-bit (15M), 1080p 12-bit (15M)
1080p 8-bit (15M), 1080p 12-bit (15M)
1080p 8-bit (45M), 1080p 12-bit (15M)
RGB_24/36, YCbCr 4:4:4_24/36, YCbCr 4:2:2, xvYCC
Yes/Yes
1080p 12-bit
480i~1080p 50/60, 1080p 24, VGA~UXGA
480i~1080p 50/60, 1080p 24, VGA~UXGA
5VDC/6A (US/EU standards, CE/FCC/UL certified)
438(W) x 175(D) x 44(H)
2150
Aluminum
Black
0°C ~ 40°C / 32°F ~ 104°F
-20°C ~ 60°C / -4°F ~ 104°F
20% ~ 90% RH (non-condensing)
16.5W (MAX)
3
7. Operation Controls and Functions
7.1 Front Panel
IN
IN
POWER
CMLUX-4H4CAT
PU-O4H4C
HDMI V1.3 to CAT6 4X4 Matrix
1
2
3
IN
IN
4
HDMI OUT
OUT
HDMI
①
HDCP HDMI/DVI
1
2
3
IN
IN
4
A
A
HDCP HDMI/DVI
1
2
3
B
B
②
IN
IN
4
HDCP HDMI/DVI
1
2
3
4
C
C
HDCP HDMI/DVI
D
D
③
④⑤
①. Remote control sensor.
②. Power switch & LED Indicator: This LED will illuminate when the power is
turned on.
.
③ Input Select/Indicators (A/B/C/D): Press each “HDMI out” button
repeatedly to switch to your desired source. The LED that illuminates to
indicate the input source being selected and routed to HDMI A display.
④. HDCP indicators: This LED will illuminate once the input source being
played comes with a HDCP protection.
⑤. HDMI/DVI indicators: When the input is HDMI content, this LED will
illuminate. When playing DVI from the input source, this LED will not
illuminate.
7.2 Rear Panel
IR OUT
RS-232
4
CAT6 OUTPUT
4
EDID
STD
TV
①②
DDC
D
VIDEO
DDC
C
VIDEO
DDC
③
B
VIDEO
DDC
A
VIDEO
2
3
3
1
2
DC 5V
1
IR MAIN
IN
OUT
HDMI INPUT
④
⑤
⑥⑦⑧
①. EDID Control Switcher: Default factory setting is on TV, leave as it is when
the display is displaying properly. Switch to STD to use built-in EDID.
Note:
1. When EDID is switched to TV, the unit will detect the first HDMI output
source’s EDID and record it in the unit. If the first detected output
source is DVI, it will skip onto the next source until the first HDMI source
is detected. The detection priority is HDMI v1.3 > HDMI v1.2 > DVI.
4
②.
③.
④.
⑤.
⑥.
⑦.
⑧.
2. When EDID is switched to STD, the unit will use its built-in EDID that
supports:
Video →1080p 12-bit (max) supports xvYCC
Audio →PCM 2CH
3. The EDID selection will only be activated after the unit is re-plugged
and powered on.
RS-232: This slot is where you connect a D-Sub 9-pin cable to the PC COM
port when controlling the device over RS-232. Detailed specifications are
listed in section 9.
Video/DDC CAT 6 outputs: These slots are where you connect two
CAT6 cables to a receiver box that has HDMI output and through the
HDMI output it can be connect to TV. The receiver box can also be a
splitter that provides additional CAT6 outputs when cascading from a
HDMI receiver to the display via HDMI cable.
IR OUT: These slots are where you connect with IR blaster cables included
in the package. Place it near each designate source equipment for
infrared signal sending.
HDMI inputs: These slots are where you connect input ports to the HDMI
or DVI output of your source equipments such as DVD player or set-topbox with HDMI cables.
Power: Plug the 5VDC power supply into the unit and connect the
adaptor to an AC wall outlet.
IR MAIN IN: This slot is where you connect the IR receiver cable included
in the package. Connecting the IR receiver cable allows you to source
equipments through the existing remote controls.
IR MAIN OUT: This slot is where you connect the IR blaster cable included
in the package. Place it near both the device and/or source equipments
for infrared signal sending.
5
8. Remote Control
1. Power: Press this button to turn on/off the unit.
2. Input Select for HDMI OUT A: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT A.
3. Input Select for HDMI OUT B: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT B.
4. Input Select for HDMI OUT C: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT C.
5. Input Select for HDMI OUT D: Press 1, 2, 3 or 4
to select the desired input source for HDMI OUT D.
5
9. RS-232 Protocol
9.1 Pin Definitions
PU-O4H4C
CMLUX-4H4CAT
PIN
1
2
3
4
5
6
7
8
9
Definitions
NC
TxD
RxD
NC
GND
NC
NC
NC
NC
Remote Control Console
→
←
* RS-232 transmission format:
Baud Rate: 9600bps
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bit
Flow Control: None
6
PIN
1
2
3
4
5
6
7
8
9
Definitions
NC
RxD
TxD
NC
GND
NC
NC
NC
NC
9.2 Commands
;
;
;
;
;
;
;
;
;
;
;
;
;
;
;
;
;
;
COMMAND
POWER 00
POWER 01
PORT 11
PORT 12
PORT 13
PORT 14
PORT 21
PORT 22
PORT 23
PORT 24
PORT 31
PORT 32
PORT 33
PORT 34
PORT 41
PORT 42
PORT 43
PORT 44
ACTION
Power Off (standby)
Power On
Output A select Input1
Output A select Input2
Output A select Input3
Output A select Input4
Output B select Input1
Output B select Input2
Output B select Input3
Output B select Input4
Output C select Input1
Output C select Input2
Output C select Input3
Output C select Input4
Output D select Input1
Output D select Input2
Output D select Input3
Output D select Input4
7
9.3. IR Cable Pin Definitions
IR Blaster
IR Receiver
① Power 5V
② IR blaster signal
③ IR blaster signal
① IR signal
② Power 5V
③ Grounding
① ②③
① ②③
Note: The frequency on both IR Receiver & Blaster can support 20~60KHz.
10. 3.5Ø Connectors Pin Definitions
10.1 IR IN Pin Definitions
Pin
Assignment
1
Power 5V
2
IR Signal
3
GND
10.2 IR OUT Pin Definitions
Pin
Assignment
1
IR Blaster Signal
2
Power 5V
3
IR Blaster Signal
10.3 RJ-45 Pin Definitions
Pin
Video
DDC
1
TX2+
DDC Bus Clock
2
TX2-
NC
3
TX1+
DDC Bus Data
4
TX0+
Power 5V
5
TX0-
GND
6
TX1-
IR IN
7
TXC+
HPD
8
TXC-
NC
8
11. Connection and Installation
3M
3M
30°
30°
7M
POWER
OUTPUT
A
OUTPUT
IR
Receiver
B
OUTPUT
C
OUTPUT
D
30°
3M
CR-33
3M
30°
7M
HDMI
HDMI
HDMI
HD TV
30°
3M
7M
HD TV
30°
3M
30°
3M
30°
HDMI
HDMI
Line
HDMI
3M
30°
CH-1106RX
HDMI
HDMI
Line
3M
30°
3M
HDMI
HDMI
Line
3M
3M
CLUX-1CAT8H
HDMI
Line
IR Receiver
HDMI
CLUX-1CAT4H
30°
For Play D
Play D
CLUX-22HC
3M
For Play C
Play C
HDMI Cable
3M
For Play B
Play B
30°
Play A
CAT 6 Cable
IR Blaster
for all players
For Play A
3M
7M
30°
HD TV
3M
30°
HD TV
9
7M
A
Acronyms
Acronym
Complete Term
CAT6
Catergory 6 Cable
DTS
Digital Theater Systems
DVI
Digital Visual Interface
EDID
Extended Display Identification Data
HDCP
High-Bandwidth Digital Content Protection
HDMI
High-Definition Multimedia Interface
IR
Infrared
UXGA
Ultra Extended Graphics Array
VGA
Video Graphics Array
10
Download PDF