INSTRUCTION MANUAL EN SFPA140 BUILT-IN OVEN

INSTRUCTION MANUAL EN SFPA140 BUILT-IN OVEN
BUILT-IN OVEN
SFPA140
EN
INSTRUCTION MANUAL
ENGLISH
1 Dear customer, we would like to thank you for your confidence in us.
By choosing a Smeg product, you have opted for solutions where research for beauty meets innovative technical
design to provide unique pieces of furniture.
We hope you get the most out of your household appliance.
Kindest regards.
SFPA140
1 Instructions
1.1
1.2
1.3
1.4
1.5
1.6
1.7
General safety instructions
Manufacturer liability
Appliance purpose
Disposal
Identification plate
This user manual
How to read the user manual
2 Description
2.1
2.2
2.3
2.4
General Description
Control panel
Other parts
Available accessories
3 Use
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4
EN
Contents
4
5
5
5
6
6
6
7
7
8
8
9
11
Instructions
First use
Using the accessories
Using the oven
Cooking advice
Special functions
Preset recipes
Personal recipes
Settings
4 Cleaning and maintenance
4.1 Instructions
4.2 Cleaning the surfaces
4.3 Ordinary daily cleaning
4.4 Food stains or residues
4.5 Removing the door
4.6 Cleaning the door glazing
4.7 Removing the internal glass panels
4.8 Cleaning the inside of the oven
4.9 Vapor Clean: assisted oven cleaning (on some models only)
4.10 Pyrolytic: automatic oven cleaning
4.11 Extraordinary maintenance
5 Installation
5.1 Electrical connection
5.2 Cable replacement
5.3 Positioning
11
11
12
14
18
24
27
33
36
38
38
38
38
38
38
39
39
40
42
45
48
50
50
50
51
We advise you to read this manual carefully, which contains all the instructions for
maintaining the appliance's aesthetic and functional qualities.
For further information on the product: www.smeg.com
3
Instructions
1 Instructions
1.1 General safety instructions
Risk of personal injury
• During use the appliance and its
accessible parts become very hot.
• Never touch the heating elements
during use.
• Keep children under eight years
of age at a safe distance if they
are not constantly supervised.
• Children must never play with the
appliance.
• Never rest metallic objects such
as knives, forks, spoons and lids
on the appliance during use.
• Switch the appliance off
immediately after use.
• Never try to put out a fire or
flames with water: turn off the
appliance and smother the flames
with a fire blanket or other
appropriate cover.
• The appliance must never be
cleaned by unsupervised children.
• Have qualified personnel carry
out installation and assistance
interventions according to the
standards in force.
• Do not modify this appliance.
• Do not insert pointed metal
objects (cutlery or utensils) into the
slots in the appliance.
4
• Do not try to repair the appliance
yourself or without the intervention
of a qualified technician.
• If the power supply cable is
damaged, contact technical
support immediately and they will
replace it.
Risk of damaging the appliance
• Do not use abrasive or corrosive
detergents on glass parts (e.g.
powder products, stain removers
and metallic sponges).
• Use wooden or plastic utensils.
• Do not seat on the appliance.
• Do not use steam jets for cleaning
the appliance.
• Do not obstruct ventilation
openings and heat dispersal slots.
• Never leave the appliance
unattended during cooking
operations where fats or oils
could be released.
• Never leave objects on the
cooking surface.
• Do not use the appliance to heat
rooms for any reason.
For this appliance
1.4 Disposal
• Ensure that the appliance is switched off
before replacing the bulb.
• Do not rest any weight or sit on the open
door of the appliance.
• Take care that no objects are stuck in the
doors.
This appliance must be disposed of
separately from other waste
(Directives 2002/95/EC, 2002/
96/EC, 2003/108/EC). The appliance
does not contain substances in quantities
sufficient to be considered hazardous to
health and the environment, in accordance
with current European directives.
To dispose of the appliance:
• Cut the power supply cable and remove
it along with the plug.
1.2 Manufacturer liability
The manufacturer declines all liability for
damage to persons or property caused by:
• use of the appliance other than the one
envisaged;
• non-observance of the user manual
provisions;
• tampering with any part of the
appliance;
• use of non-original spare parts.
1.3 Appliance purpose
• This appliance is intended for cooking
food in the home environment. Every
other use is considered improper.
• This appliance may be used by children
aged at least 8 and by people of
reduced physical and mental capacity,
or lacking in experience in the use of
electrical appliances, as long they are
supervised or instructed by adults who
are responsible for their safety.
• The appliance is not designed to
operate with external timers or with
remote-control systems.
Power voltage
Danger of electrocution
• Disconnect the main power supply.
• Disconnect the power cable from the
electrical system.
• Consign the appliance to the
appropriate selective collection centres
for electrical and electronic equipment
waste, or deliver it back to the retailer
when purchasing an equivalent product,
on a one for one basis.
5
EN
Instructions
Instructions
Our appliances are packed in nonpolluting and recyclable materials.
• Consign the packing materials to the
appropriate selective collection centres.
Plastic packaging
Danger of suffocation
• Do not leave the packaging or any part
of it unattended.
• Do not let children play with the
packaging plastic bags.
1.5 Identification plate
The identification plate bears the technical
data, serial number and brand name of the
appliance. Do not remove the identification
plate for any reason.
1.6 This user manual
This user manual is an integral part of the
appliance and must therefore be kept in its
entirety and in an accessible place for the
whole working life of the appliance.
Read this user manual carefully before using
the appliance.
1.7 How to read the user manual
This user manual uses the following reading
conventions:
Instructions
General information on this user
manual, on safety and final
disposal.
Description
Description of the appliance and its
accessories.
Use
Information on the use of the
appliance and its accessories,
cooking advice.
Cleaning and maintenance
Information for proper cleaning and
maintenance of the appliance.
Installation
Information for the qualified
technician: installation, operation
and inspection.
Safety instructions
Information
Advice
1. Use instruction sequence.
• Single use instruction.
6
Description
EN
2 Description
2.1 General Description
1 Control panel
2 Oven light
3 Seal
4 Door
5 Fan
6 Rack/tray support frames
7 Pizza plate (on some models only)
Frame shelf
7
Description
2.2 Control panel
Display (1)
2.3 Other parts
The touchscreen display allows you to
interact with the appliance. Press the icons
to access the various available functions.
The display will show all operational
parameters, such as: selected function,
time/temperature settings or pre-set
cooking program settings.
Shelves
In general, press the
symbol to return to
the previous menu or end a function; press
the
symbol to confirm the selected
options.
Cooling fan
The appliance features shelves for
positioning trays and racks at different
heights. The insertion heights are indicated
from the bottom upwards (see 2.1 General
Description).
The fan cools the oven and comes into
operation during cooking.
The fan causes a steady outflow of air from
above the door which may continue even
after the appliance has been turned off.
Interior lighting
The oven light comes on when the door is
opened or any function is selected, except
for
,
and
.
Press the
symbol to manually activate
the oven light or the
symbol to
deactivate it during use.
8
Description
Oven tray
EN
2.4 Available accessories
Some models are not provided
with all accessories.
Rack
Useful for collecting fat from foods placed
on the rack above.
Deep tray
Useful for collecting fat from foods placed
on the rack.
Useful for supporting containers with food
during cooking.
Tray rack
To be placed over the top of the oven tray;
for cooking foods which may drip.
9
Description
Pizza plate
To replace the pizza plate when it is not in
use.
The oven accessories intended to
come into contact with food are
made of materials that comply with
the provisions of current legislation.
Specially designed for cooking pizza and
similar dishes.
The pizza plate must only be used
for cooking pizza and similar
dishes. When cooking other
dishes, the pizza plate must be
removed from its compartment and
replaced with the special pizza
plate cover.
Pizza spatula
For easily placing the pizza on the pizza
plate.
Pizza plate cover
10
Original supplied and optional
accessories can be requested to
Authorised Assistance Centres.
Use only original accessories
supplied by the manufacturer.
Use
3.1 Instructions
High temperature inside the oven
during use
Danger of burns
• Keep the oven door closed during
cooking.
• Protect your hands wearing heat
resistant gloves when moving food
inside the oven.
• Do not touch the heating elements inside
the oven.
• Do not pour water directly onto very hot
trays.
• Do not allow children to get near the
oven when it is in operation.
High temperature inside the oven
during use
Danger of fire or explosion
• Do not spray any spray products near
the oven.
• Do not use or leave flammable materials
near the oven.
• Do not use plastic kitchenware or
containers when cooking food.
• Do not put sealed tins or containers in
the oven.
• Do not leave the oven unattended
during cooking operations where fats or
oils could be released.
• Remove all trays and racks which are
not required during cooking.
Improper use
Risk of damage to enamelled
surfaces
EN
3 Use
• Do not cover the bottom of the oven
cavity with aluminium or tin foil sheets.
• If you wish to use greaseproof paper,
place it so that it will not interfere with the
hot air circulation inside the oven.
• Do not place pans or trays directly on
the bottom of the oven cavity.
• Do not pour water directly onto very hot
trays.
3.2 First use
1. Remove any protective film from the
outside or inside of the appliance,
including accessories.
2. Remove any labels (apart from the
technical data plate) from the
accessories and from the oven cavity.
3. Remove and wash all the appliance
accessories (see 4 Cleaning and
maintenance).
4. Heat the empty oven at the maximum
temperature to burn off any residues left
by the manufacturing process.
11
Use
3.3 Using the accessories
Tray rack
Racks and trays
The tray rack has to be inserted into the tray.
In this way fat can be collected separately
from the food which is being cooked.
Racks and trays have to be inserted into the
side guides until they come to a complete
stop.
• The mechanical safety locks that prevent
the rack from being taken out
accidentally have to face downwards
and towards the oven back.
Gently insert racks and trays into
the oven until they come to a stop.
Clean the trays before using them
for the first time to remove any
residues left by the manufacturing
process.
12
Cover and pizza plate (on some models
only)
Improper use
Risk of damage to surfaces
• Do not use the pizza plate other than as
described, for example do not use it on
gas or glass ceramic hobs or in ovens
which are not designed for this purpose.
• If you like oil on your pizza, it is best to
add it after removal from the oven since
oil stains on the pizza plate are unsightly
and may reduce its efficiency.
• If the pizza plate is not in use, cover the
bottom of the oven with the cover
provided.
Pizza spatula (on some models only)
Always hold the pizza spatula by the
handle to put food in and take it out of the
oven. You are advised to dust the steel
surface lightly with flour to make it easier to
slide fresh products on and off, as they
could stick to the steel due to their moisture
content.
With the oven cold, remove the cover from
the bottom and insert the pizza plate. Make
sure that the plate is inserted correctly in the
recess provided.
Use the specially stored programs for
cooking, see “Preset recipes”.
13
EN
Use
Use
3.4 Using the oven
Home screen
First use
Press the time on the display. It is now
possible to select the various available
functions on the home screen of the
appliance.
On the first use, or after a power failure,
will be flashing on the appliance's
display. In order to be able to start any
cooking program, the current time must be
set (if the oven is being turned on for the first
time, it is also recommended you set the
required language).
Touch the display to enter the settings menu
– see “3.9 Settings”.
On first use, the appliance
language is set to “English” by
default.
1 Settings
2 Preset recipes
3 Cooking functions
4 Special functions
5 Personal recipes
History
When first connecting or after the
power has been cut for a time it
will be necessary to wait a few
seconds before you can interact
with the appliance.
14
Touch the “Smeg” logo on the Home
screen to view the most recent Preset or
Personal recipes used.
Cooking functions
1. Select the “cooking functions” option on
the home screen.
4. When the preheating stage is over a
buzzer will sound to indicate that the
food can be placed inside the oven.
2. Select the required function.
Modifying the preset temperature
EN
Use
1. Press the displayed temperature to
change it.
2. Enter the new temperature using the
numeric keypad displayed, then confirm
by pressing the
symbol.
3. The appliance will begin preheating. The
display will show the chosen function, the
pre-set temperature, the current time and
the progress bar of the temperature
reached (preheating).
Press the function symbol and then
select the new function required to
change function during cooking.
It is not recommended to place the
dish in the oven during the
automatic pre-heat stage.
15
Use
Interrupting a function
Press the return symbol
to interrupt a
cooking function. Select the required option
and confirm it.
To interrupt cooking at any time,
press the
symbol for at least 5 seconds This
way confirmation will not be
required for the operation.
16
Functions list
Certain functions are not available
on all models.
Eco
The combination of the fan and the
circulaire heating element, in ECO
mode, is particularly indicated for
cooking on a single shelf, with
reduced power consumption.
Static
As the heat comes from above and
below at the same time, this system
is particularly suitable for certain
types of food. Traditional cooking,
also known as static cooking, is
suitable for cooking just one dish at
a time. Perfect for all types of roasts,
bread and cakes and in any case
particularly suitable for fatty meats
such as goose and duck.
Grill
The heat coming from the grill
element gives perfect grilling results
above all for thin and medium
thickness meat and in combination
with the rotisserie (where fitted)
gives the food an even browning at
the end of cooking. Perfect for
sausages, spare ribs and bacon.
This function enables large
quantities of food, particularly meat,
to be grilled evenly.
Lower element
The heat coming just from the
bottom allows you to complete the
cooking of foods that require a
higher bottom temperature, without
affecting their browning. Perfect for
cakes, pies, tarts and pizzas.
Fan assisted
The operation of the fan, combined
with traditional cooking, ensures
consistent cooking even with
complex recipes. Perfect for biscuits
and cakes, even when
simultaneously cooked on several
levels. (For multiple-level cooking,
we recommend using the 1st and 4th
shelves.)
Turbo
The combination of fan assisted
cooking and traditional cooking
allows different foods to be cooked
on several levels extremely quickly
and efficiently, without odours and
flavours mingling. Perfect for large
volumes that call for intense
cooking. (For multiple-level cooking,
we recommend using the 1st and 4th
shelves.)
Fan with grill
The air produced by the fan softens
the strong heatwave generated by
the grill, grilling perfectly even very
thick foods. Perfect for large cuts of
meat (e.g. shin of pork).
17
EN
Use
Use
Fan + bottom
The combination of the fan with just
the lower heating element allows
cooking to be completed more
rapidly. This system is
recommended for sterilising or for
finishing off the cooking of foods
which are already well-cooked on
the surface, but not inside, which
therefore need a little more heat.
Perfect for any type of food.
Circulaire
The combination of the fan and the
circulaire heating element
(incorporated in the rear of the
oven) allows you to cook different
foods on several levels, as long as
they need the same temperatures
and type of cooking. Hot air
circulation ensures instant and even
distribution of heat. It will be
possible, for instance, to cook fish,
vegetables and biscuits
simultaneously (on different levels)
without mixing odours and flavours.
Circulaire + fan with grill
The combination of fan assisted
cooking and traditional cooking
allows you to cook different foods
on several levels extremely quickly
and efficiently, without odours and
flavours mingling. Perfect for large
volumes that call for intense
cooking.
18
3.5 Cooking advice
General advice
• Use a fan assisted function to achieve
consistent cooking at several levels.
• It is not possible to shorten cooking times
by increasing the temperature (the food
could be overcooked on the outside and
undercooked on the inside).
• To prevent condensation from forming on
the glass, hot food should not be left
inside the oven for too long after
cooking.
Advice for cooking meat
• Cooking times vary according to the
thickness and quality of the food and to
consumer taste.
• Use a meat thermometer when roasting
meat, or simply press on the roast with a
spoon. If it is hard, it is ready; if not, it
needs another few minutes cooking.
Advice for cooking with the Grill and the
Fan with grill
• Meat can be grilled even when it is put
into the cold oven or into the preheated
oven if you wish to change the effect of
the cooking.
• With the Fan with grill function, we
recommend that you preheat the oven
before grilling.
• We recommend placing the food at the
centre of the rack.
Advice for cooking desserts/pastries and
biscuits
• Use dark metal moulds: they help to
absorb the heat better.
• The temperature and the cooking time
depend on the quality and consistency
of the dough.
• To check whether the dessert is cooked
right through: at the end of the cooking
time, put a toothpick into the highest point
of the dessert. If the dough does not stick
to the toothpick, the dessert is cooked.
• If the dessert collapses when it comes
out of the oven, on the next occasion
reduce the set temperature by about
10°C, selecting a longer cooking time if
necessary.
To save energy
• Stop cooking a few minutes before the
time normally used. Cooking will
continue for the remaining minutes with
the heat which has accumulated inside
the oven.
• Reduce any opening of the door to a
minimum to avoid heat dispersal.
• Keep the inside of the appliance clean
at all times.
• (Where fitted) When it is not being used,
remove the pizza plate and put the
cover back in its slot.
Advice for defrost and proving
• Place frozen foods without their
packaging in a lidless container on the
first shelf of the oven.
• Avoid overlapping the food.
• To defrost meat, use the rack placed on
the second level and a tray on the first
level. In this way, the liquid from the
defrosting food drains away from the
food.
• The most delicate parts can be covered
with aluminium foil.
• For successful proving, a container of
water should be placed in the bottom of
the oven.
19
EN
Use
Use
Minute minder during function
This function only activates the
buzzer, without stopping cooking.
1. Press the
symbol on the display
during a cooking function.
2. Select the “minute minder” option.
Cooking duration
Cooking duration means the
function which allows a cooking
operation to be started and then
ended after a specific length of
time set by the user.
Activation of timed cooking
cancels any minute minder timer
which may previously have been
set.
1. Press the
symbol on the display
during a cooking function.
2. Select the “cooking duration” option.
3. Set the duration by selecting the minutes
and hours (from 1 minute to 4 hours).
3. Set the duration by selecting the minutes
and hours (from 1 minute to 13 hours).
4. Press
to confirm; the display will
show the time remaining before the
buzzer sounds.
20
Use
Modifying the set data
EN
4. Press
to confirm; the display will
show the time remaining before cooking
finishes.
During operation, it is possible to modify
timed cooking duration:
1. Press the
symbol.
2. Select the “duration” option.
3. Enter the new temperature using the
numeric keypad displayed, then confirm
by pressing the
symbol.
5. At the end of the cooking time “cooking
completed” appears on the display and
a buzzer will sound that can be
deactivated by pressing the
symbol.
or
To extend the cooking time
manually, press the
symbol
again. The appliance will resume
its normal operation with the
previously selected cooking
settings.
To turn off the appliance see
“ Interrupting a function”.
21
Use
Delay cooking
Delay cooking is the function
which allows a cooking operation
to be stopped at an established
time depending on the time set by
the user, after which the oven will
switch off automatically.
5. At the end of cooking, the display will
show the message “cooking completed”.
A series of beeps will sound to notify the
user. Press the
“home screen”.
symbol to return to the
1. After selecting the cooking duration
during a function, press the
symbol.
2. Select the “function delayed” option
3. Set the end of cooking time.
To extend the cooking time
manually, press the
symbol.
The appliance will resume its
normal operation with the
previously selected cooking
settings.
For safety reasons, it is not possible
to set the end of cooking time by
itself without setting the cooking
duration.
4. The appliance waits for the set start time.
22
Use
EN
Modifying the set data
During operation, it is possible to modify
delay cooking duration:
1. Press the
symbol.
2. Select the “duration” or “function
delayed” option to modify the
corresponding jobs.
3. Enter the new temperature using the
numeric keypad displayed, then confirm
by pressing the
symbol.
23
Use
3.6 Special functions
The special functions menu contains some
functions like the minute minder with the
oven off, cooking functions (certain models
only), keep warm or cleaning functions
(certain models only).
Defrost
Rapid defrost is assisted by
switching on the fan and the upper
heating element, ensuring even
distribution of low-temperature air
inside the oven.
Food warming
To heat food or keep it hot.
Certain functions are not available
on all models.
List of special functions
Minute minder
This function sounds a buzzer when
the time set has elapsed.
Proving
Leavening helped by heat from
above allows any type of dough to
prove, ensuring optimal results in a
short time.
During proving, the internal light is
disabled so as not to affect the
result of the function. Turn on the
light manually if this should be
necessary.
24
Keep warm
Useful to keep already cooked
food warm without altering the taste
and smell obtained during cooking.
Vapor Clean
This function makes cleaning easier
using the steam produced by a little
quantity of water poured onto the
appropriate drawing placed on the
bottom.
Pyrolytic
Setting this function, the oven
reaches temperatures up to 500°C,
destroying all the grease which
forms on the internal walls.
Use
The more complex special
functions are illustrated below. For
functions such as Vapor Clean,
Pyrolytic and Eco Pyrolytic, see “4
Cleaning and maintenance”.
Minute minder
EN
Eco pyrolytic
When this function is set, the oven
executes a pyrolytic cycle at
500°C for a pre-set time. For use in
the case of ovens which are not too
dirty.
1. Select minute minder from the special
functions menu.
2. Set the duration by selecting the minutes
and hours (from 1 minute to 4 hours).
3. The display will show the minutes
remaining.
25
Use
4. Press the
symbol to display the time
again, when required. The minute minder
will remain active and the
symbol will
be shown in the top left.
You must return the counter to zero
to remove the special minute
minder.
Food warming
1. Position the tray on the first shelf and
place the plates to be warmed in its
centre.
2. Select “food warming” from the special
functions menu.
If a function is activated after
setting a minute minder time, this
time will be automatically used as
a minute minder for the function.
This function only activates the
buzzer, without stopping cooking.
3. Press the
function.
symbol to activate the
It is possible to modify the cooking
temperature by pressing it.
Do not stack plates too high. Stack
plates a maximum of 5/6 high.
26
Use
This mode allows you to select a pre-set
food cooking program.
The appliance will automatically calculate
the optimum cooking parameters based on
the weight entered.
3. Select the type of cooking (where
possible, based on the dish chosen)
EN
3.7 Preset recipes
4. Select the weight of the dish to cook.
Starting a program
1. Select the required program; use the
and
cursors to scroll through the list
of available programs.
5. At this point it is possible to start the
selected program, permanently change
the settings or delay the cooking.
2. Select the sub-category of dish to cook.
27
Use
6. If you choose the “Start” option, cooking
will start with the program's predefined
settings and the display will show all the
parameters set.
The time shown does not include
the time to reach temperature.
7. Once the set temperature has been
reached, the cooking program will have
the duration shown. A message will
indicate when to place the food in the
oven and enable the start of cooking.
The predefined cooking
parameters can be changed at
any time, even after cooking has
started.
28
Program end
1. When the program has finished, the
appliance will warn the user with
buzzers and the flashing
symbol.
2. Press the
symbol to perform cooking
with the same parameters currently set
(press the symbol twice if the buzzer is
active). The appliance will automatically
restart cooking if it is at the correct
temperature; otherwise it will also resume
preheating.
Cooking in sequence is useful to
cook multiple dishes of the same
type. For example, it can be used
to cook several pizzas in a row.
It is not recommended to place the
dish in the oven during the
automatic pre-heat stage. Wait for
the specific message.
3. Press the
program.
symbol to exit and finish the
Permanently changing a program
1. Select the program to change and the
change option.
2. Select the parameter to change:
Cooking temperature, function, duration,
shelf, weight.
3. When you have finished making
changes, press the
symbol; you will
be asked to confirm the changes you
have just made.
If the changes are not confirmed,
the program will remain
unchanged.
The maximum permissible weight
for the recipe is determined by the
dish selected.
29
EN
Use
Use
Predefined program table
BREAD
Subcategory
Focaccia
Leavened bread
Cooking
-
Weight
(Kg)
Function
Level
Temp. (°C)
Time
(minutes)
1
1
Turbo
Circulaire
2
2
180
200
25
30
Function
Level
Temp. (°C)
Turbo
Fan assisted
Fan assisted
Circulaire
Turbo
Circulaire
Turbo
Circulaire
Static
Static
2
2
2
2
2
2
2
2
2
2
160
180
160
160
120
160
180
160
170
170
Function
Level
Temp. (°C)
Fan assisted
Circulaire
Circulaire
Circulaire
Circulaire
Circulaire
2
2
2
2
2
160
160
160
160
180
160
DESSERTS/PASTRIES
Subcategory
Biscuits
Brioche bread
Bundt cake
Croissants
Meringues
Muffins
Profiteroles
Sponge cake
Strudel
Tart
Cooking
-
Weight
(Kg)
0.6
1
1
0.6
0.3
0.5
0.5
1
1
0.8
Time
(minutes)
18
40
60
30
90
18
70
60
40
40
FISH
Subcategory
Fresh fish
Frozen fish
Monkfish
Sea bass
Snapper
Turbot
30
Cooking
-
Weight
(Kg)
0.5
0.5
0.8
1
1
1
2
Time
(minutes)
35
45
60
45
30
35
MEATS
Subcategory
Cooking
Bacon
Chicken
roasted
medium
well done
roasted
rare
medium
well done
roasted
-
Lamb
Pork chops
Pork loin
Pork sausages
Pork spare ribs
Rabbit
Roast beef
Turkey
Veal
Weight
(Kg)
0.5
0.5
1.5
1.5
1
1
1
1
1.5
1
1
1
3
1.2
Time
(minutes)
7
40
100
110
15
75
12
16
Function
Level
Temp. (°C)
Fan with grill
Turbo
Turbo
Turbo
Fan with grill
Turbo
Fan with grill
Fan with grill
Circulaire
Circulaire
Circulaire
Circulaire
Fan assisted
Fan assisted
4
2
2
2
4
2
4
4
2
250
190
190
190
280
190
280
250
190
200
200
200
1
2
190
190
110
70
Function
Level
Temp. (°C)
Time
(minutes)
Static
Fan assisted
Static
Static
1
2
1
1
230
190
220
200
Function
Level
Temp. (°C)
Circulaire
2
180
Function
Level
Temp. (°C)
Fan assisted
Fan assisted
Fan assisted
1
1
1
280
280
230
2
2
2
80
35
40
45
PASTA/RICE
Subcategory
Lasagne
Paella
Pasta bake
Quiche
Cooking
-
Weight
(Kg)
2
0.5
2
0.5
35
25
40
30
PIES/FLANS
Subcategory
Soufflé
Cooking
-
Weight
(Kg)
0.5
Time
(minutes)
25
PIZZA
Subcategory
Pan baked pizza
Stone baked pizza
Cooking
fresh
frozen
Weight
(Kg)
1
0.5
0.3
Time
(minutes)
7
4
6
31
EN
Use
Use
SLOW COOKING
Subcategory
Cooking
rare
medium
well done
-
Beef
Lamb
Pork
Veal
Weight
(Kg)
1
1
1
1
1
1
Function
Level
Temp. (°C)
Static
Static
Static
Turbo
Turbo
Turbo
2
2
2
2
2
2
90
90
90
90
90
90
Function
Level
Temp. (°C)
Grill
Circulaire
Fan assisted
Turbo
4
2
2
2
250
170
220
200
Time
(minutes)
105
300
380
360
330
360
VEGETABLES
Subcategory
Mixed vegetables
Potatoes
Cooking
grilled
roasted
frozen
roasted
Weight
(Kg)
0.5
1
0.5
1
The cooking times in the table refer
to the food indicated in the recipe
and are a guide only; they may
vary depending on personal taste.
The tables give the factory-set
data. To reset a predefined
program with the original settings
after it has been modified, just
enter the data given in the table
above.
If ECO logic mode (see 3.8
Personal recipes) has been
activated, cooking times or
preheating times may vary.
32
Time
(minutes)
25
45
13
40
3.8 Personal recipes
This menu allows you to enter a personal
recipe with the parameters you wish to use.
On first use, the appliance will only offer to
let you add a new recipe. After storing your
recipes, these will then be available in the
relative menu.
3. Press the
symbol; you will be asked
to enter a name for the recipe.
In order to be able to save the
recipe, the name must contain at
least one character.
4. When you have finished making
Up to 10 personal recipes can be
stored.
Adding a recipe
changes, press the
symbol; you will
be asked to confirm the changes you
have just made.
1. Select “add” from the personal recipes
menu.
2. Select the parameter to change:
Cooking temperature, function, duration,
shelf, weight.
If the changes are not confirmed,
the program will remain
unchanged.
The recipe name can contain
maximum 10 characters, including
spaces.
33
EN
Use
Use
Starting a personal recipe
1. Select a previously saved personal
recipe with the control knob (in the
example, a recipe for “duck” has been
saved).
Changing a personal recipe
1. Select a previously saved personal
recipe with the control knob (in the
example, a recipe for “duck” has been
saved).
2. Select the “start” option from the
submenu.
2. Select the change option from the
submenu.
3. Cooking will start with the parameters
previously set for the recipe.
3. Repeat the same steps, starting at point 2
of the chapter “Adding a recipe”.
During cooking it is always
possible to modify the temperature
and cooking time, but this will not
be saved to the recipe for future
use.
34
Delay cooking
Deleting a personal recipe
1. Select a personal recipe.
2. Select the “function delayed” option from
the submenu.
1. Select a personal recipe.
2. Select the “Delete” option from the
submenu.
3. Select the end of cooking time.
3. Confirm the deletion. Select YES to
permanently delete the recipe.
EN
Use
It is not possible to set an end of
cooking time which would be
before the current time plus the
recipe duration.
4. The appliance will wait for the start time
to start cooking with the specified
parameters.
35
Use
3.9 Settings
The product is set using this menu.
Language
Sets the interface language from those
available.
Clock
Sets the time displayed.
36
Control lock
Allows the appliance to automatically lock
the controls after one minute of normal
operation without any intervention from the
user.
To temporarily disengage the lock during
cooking, press any setting.
Press the icon displayed to the side for 3
seconds to unlock the appliance.
Demo mode
This mode allows the appliance to
deactivate all heating elements, while
keeping the control panel active.
Sound
The appliance beeps whenever the controls
are pressed. This setting disables these
sounds.
If the mode is active, “demo
mode” will be shown on the
display.
To use the appliance normally, set
this mode to OFF.
Eco-Logic
This mode allows the appliance to limit the
power used. The
symbol will appear
on the display if this option is enabled.
Activating eco-logic mode means
that preheating and cooking times
may be extended.
37
EN
Use
Cleaning and maintenance
4 Cleaning and maintenance
4.1 Instructions
Improper use
Risk of damage to surfaces
• Do not use steam jets for cleaning the
appliance.
• Do not use cleaning products containing
chlorine, ammonia or bleach on steel
parts or parts with metallic finishes on the
surface (e.g. anodizing, nickel- or
chromium-plating).
• Do not use abrasive or corrosive
detergents on glass parts (e.g. powder
products, stain removers and metallic
sponges).
• Do not use rough or abrasive materials
or sharp metal scrapers.
4.4 Food stains or residues
Do not use metallic sponges or sharp
scrapers as they will damage the surfaces.
Use ordinary non-abrasive products with
the aid of wooden or plastic utensils if
necessary. Rinse thoroughly and dry with a
soft cloth or a microfibre cloth.
Do not allow residues of sugary foods (such
as jam) to set inside the oven. If left to set for
too long, they might damage the enamel
lining of the oven.
4.5 Removing the door
For easier cleaning, the door can be
removed and placed on a canvas.
To remove the door proceed as follows:
1. Open the door completely and insert two
pins into the holes on the hinges
indicated in the figure.
4.2 Cleaning the surfaces
To keep the surfaces in good condition,
they should be cleaned regularly after use.
Let them cool first.
4.3 Ordinary daily cleaning
Always use only specific products that do
not contain abrasives or chlorine-based
acids.
Pour the product onto a damp cloth and
wipe the surface, rinse thoroughly and dry
with a soft cloth or a microfibre cloth.
38
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
Cleaning and maintenance
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections A are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
EN
4.7 Removing the internal glass
panels
For easier cleaning the door internal glass
panels can be disassembled.
1. Remove the internal glass panel by
pulling the rear part gently upwards,
following the movement indicated by the
arrows (1).
2. Then, pull the front part upwards (2). In
this way, the 4 pins attached to the glass
detach from their housings in the oven
door.
3. Some models have an intermediate glass
panel. Remove the intermediate glass
panel by lifting it upwards.
4.6 Cleaning the door glazing
The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
We recommend the use of
cleaning products distributed by
the manufacturer.
39
Cleaning and maintenance
4. Clean the external glass panel and the
panels previously removed. Use
absorbent kitchen roll. In case of
stubborn dirt, wash with a damp sponge
and neutral detergent.
5. Refit the panels in the reverse order in
which they were removed.
6. Reposition the internal glass panel. Take
care to centre and insert the 4 pins into
their housings in the oven door by
applying slight pressure.
4.8 Cleaning the inside of the oven
For the best oven upkeep, clean it regularly
after having allowed it to cool.
Take out all removable parts.
Clean the oven racks with warm water and
non-abrasive detergent. Carefully rinse and
dry damp parts.
The oven should be operated at
the maximum temperature for
about 15-20 minutes after the use
of specific products, to burn off the
residues left inside the oven.
For easier cleaning, remove the
door.
40
Removing racks/trays support frames
On pizza models only:
Removing the guide frames enables the
sides to be cleaned more easily. This
operation should be performed each time
the automatic cleaning cycle is used (on
some models only).
To remove the guide frames: Pull the frame
towards the inside of the oven to unhook it
from its groove A, then slide it out of the
seats B at the back.
When cleaning is complete, repeat the
above procedures to put the guide frames
back in.
Remove in sequence the pizza plate cover
(1) and the base (2) on which it is placed.
The base has to be lifted a few millimetres,
then pulled outwards.
Lift the end of the lower heating element (3)
a few centimetres and clean the oven base.
Put the pizza plate base back in place,
pushing it in until it hits the back of the oven,
and push it down so that the heating
element plate is embedded into the base
itself.
41
EN
Cleaning and maintenance
Cleaning and maintenance
4.9 Vapor Clean: assisted oven
cleaning (on some models only)
Vapor Clean is an assisted
cleaning procedure which
facilitates the removal of dirt.
Thanks to this process, it is possible
to clean the inside of the oven very
easily. The dirt residues are
softened by the heat and water
vapour for easier removal
afterwards.
Preliminary operations
Before starting the Vapor Clean function:
• Completely remove all accessories from
inside the oven. The upper guard can be
left inside the oven.
• For multifunction models: Pour approx.
40 cl of water onto the floor of the oven.
Make sure it does not overflow out of the
cavity.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Carry out assisted oven cleaning
operations only when the oven is cold.
42
• For pizza models: Place a tray on the
bottom of the oven.
• Pour approximately 40 cl of water into
the tray. Make sure it does not overflow
out of the cavity.
• Spray a water and washing up liquid
solution inside the oven using a spray
nozzle. Direct the spray against the side
walls, upwards, downwards and
towards the deflector.
Vapor Clean setting
If the internal temperature is
greater than that required for the
Vapor clean function, the cycle will
be stopped immediately and
“Internal temperature unsafe,
please wait until the oven is cool”
will appear on the display. Leave
the appliance to cool down before
activating the assisted cleaning
cycle.
1. Select the Vaporclean cleaning function
from the special functions menu.
• Close the door.
We recommend spraying approx.
20 times at the most.
2. The duration and temperature of the
cleaning cycle will appear on the
display.
3. Press the
symbol to start the cycle.
43
EN
Cleaning and maintenance
Cleaning and maintenance
4. The appliance beeps at the end of the
Vapor Clean cleaning cycle; this can
only be interrupted by pressing
or
.
The temperature and time
parameters cannot be modified by
the user.
End of the Vapor Clean cycle
5. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
6. Use an anti-scratch sponge with brass
filaments on tougher encrustations.
7. In case of grease residues use specific
oven cleaning products.
8. Remove the water left inside the oven.
For improved hygiene and to avoid food
being affected by any unpleasant odours,
we recommend that the oven is dried using
a fan assisted function at 160°C for
approximately 10 minutes.
We recommend wearing rubber
gloves for these operations.
For easier manual cleaning of the
parts difficult to reach, we
recommend removing the door.
44
4.10 Pyrolytic: automatic oven
cleaning
Pyrolytic is an automatic hightemperature cleaning procedure
which causes dirt to dissolve.
Thanks to this process, it is possible
to clean the inside of the oven very
easily.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Switch off the burners or electric hot
plates of the hob installed above the
oven.
Pyrolytic function setting
1. Select the pyrolytic or eco pyrolytic
option from the special functions menu.
2. If required, press the
symbol to
select a different duration from the preset
one.
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass panel following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven.
• Remove the racks/trays support frames.
• Remove the upper guard (where
present).
• Close the door.
The duration can be changed from
a minimum of 2 hours to a
maximum of 3 hours (except for the
function whose duration is
120 minutes).
Recommended pyrolytic cycle
duration:
• Light dirt: 2 hours.
• Medium dirt: 2 ½ hours.
• Heavy dirt: 3 hours.
45
EN
Cleaning and maintenance
Cleaning and maintenance
3. Press the
cycle.
symbol to start the pyrolytic
5. At the end of the pyrolytic cycle, the door
remains locked as long as the
temperature inside the oven returns to
safety levels. Wait for the appliance to
cool down and collect the residues
deposited inside with a damp microfibre
cloth.
Pyrolytic
4. The display shows “cleaning in progress”
and the remaining time to indicate that
the appliance is carrying out the
automatic cleaning cycle. Two minutes
after the pyrolytic cycle has started the
door is locked (the door lock indicator
light
comes on) by a device that
prevents the door from being opened.
46
No function can be selected
during cooling.
During the first pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
7. Select the time for the pyrolytic to finish.
8. The appliance waits for the set start time.
If the pyrolytic cycle gives
unsatisfactory results at minimum
duration, it is recommended to set
a longer time for successive
cleaning cycles.
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time like all other cooking functions.
6. After selecting the pyrolytic cycle
duration, press the
symbol and
select “function delayed”.
It is not possible to select any
function once the door lock device
has been activated. It remains
possible, however, to switch off the
appliance using the specific
controls.
47
EN
Cleaning and maintenance
Cleaning and maintenance
4.11 Extraordinary maintenance
Live parts
Danger of electrocution
• Disconnect the oven power supply.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the racks/trays support frames.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
4. Slide out and remove the lamp.
Do not touch the halogen lamp
directly with your fingers, but wrap
it in an insulating material.
48
5. Replace the lamp with one of the same
type (40W).
6. Refit the glass cover.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
What to do if...
The display is completely off:
• Check the mains power supply.
• Check whether an omnipolar switch
upstream of the appliance supply line is
in the “ON” position.
The appliance does not heat up:
• Check whether it has been set in
“showroom” mode (for further details see
“Settings”).
The controls do not respond:
• Check whether it has been set to “control
lock” mode (for further details see
“Settings”).
The cooking times are longer than those
indicated in the table:
• Check whether it has been set to “ecologic” mode (for further details see
“Settings”).
After the automatic cleaning cycle
(pyrolytic) it is not possible to select a
function:
• Verify whether the door lock has
deactivated. If it has not, the oven has a
safety device that does not allow
functions to be selected while the door
lock is active. This is because the
temperature inside the oven is still too
high to permit any type of cooking.
The display shows “Error 4”:
• The door lock has not properly attached
to the door. This might be because the
door was accidentally opened during
the door lock activation. Switch the oven
off and on again, waiting a few minutes
before selecting a new cleaning cycle.
If the door is opened during a fan assisted
function, the fan stops:
• This is not a fault. It is a normal operation
of the appliance, useful when cooking
foods in order to avoid excessive heat
escaping. When the door is closed, the
oven will return to normal operation.
If the problem has not been
resolved or in the case of other
types of fault, contact your local
technical support centre.
If other Error XX error messages
are indicated:
note down the error message,
function and set temperature and
contact your local technical
support centre.
49
EN
Cleaning and maintenance
Installation
5 Installation
5.1 Electrical connection
Power voltage
Danger of electrocution
• Have the electrical connection
performed by authorised technical
personnel.
• The appliance must be connected to
earth in compliance with electrical
system safety standards.
• Disconnect the main power supply.
General information
Check the grid characteristics against the
data indicated on the plate.
The identification plate bearing the
technical data, serial number and brand
name is visibly positioned on the appliance.
Do not remove this plate for any reason.
The appliance works at 220-240 V~.
Use a H05V2V2-F type three-core cable (3
x 1.5 mm2 cable, referring to the cross
section of the internal conductor).
Perform the ground connection using a wire
that is 20 mm longer than the other wires.
Fixed connection
Fit the power line with an omnipolar circuit
breaker in compliance with installation
regulations.
The circuit breaker should be located near
the appliance and in an easily reachable
position.
Connection with plug and socket
Make sure that the plug and socket are of
the same type.
Avoid using adapters and shunts as these
could cause overheating and a risk of
burns.
5.2 Cable replacement
Power voltage
Danger of electrocution
• Disconnect the main power supply.
1. Unscrew the rear casing screws and
remove the casing to access the terminal
board.
2. Replace the cable.
3. Make sure that the cables (for the oven
or any hob) follow the best route in order
to avoid any contact with the appliance.
50
Installation
Heavy appliance
Danger of crush injuries
Secure the appliance to the piece of
furniture using screws.
EN
5.3 Positioning
• Place the appliance into the piece of
furniture with the aid of a second person.
Pressure on the open door
Risk of damages to the appliance
• Never use the oven door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when open.
Cover the bushings with the covers
removed previously.
Heat production during appliance
operation
Risk of fire
• Check that the piece of furniture material
is heat resistant.
• Check that the piece of furniture has the
required slots.
Appliance overall dimensions (mm)
Fastening bushings
Remove the bushing covers inserted on the
oven front.
Mount the appliance into the recess.
51
Installation
Mounting under worktops (mm)
Make sure that the piece of
furniture rear/bottom part has an
opening of approx. 60 mm.
52
Mounting into a column (mm)
Make sure that the piece of
furniture top/rear part has an
opening approx. 35-40 mm deep.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement