Cisco | SFE1000P - Small Business Managed Switch | Cisco SFE1000P 8-Port 10/100 Ethernet Switch: PoE

Data Sheet
Cisco SFE1000P 8-Port 10/100 Ethernet Switch: PoE/Fanless
Cisco Small Business Managed Switches
Secure, Reliable, Managed Ethernet Switching with PoE
Power over Ethernet easily and cost-effectively powers wireless access points, video cameras, and other
network-connected endpoints
Strong security protects network traffic to keep unauthorized users off the network
Intelligent QoS helps ensure a consistent network experience and supports networked applications including
voice, video, and data storage
Compact size and fanless design are ideal for areas with limited space
Limited lifetime warranty
Figure 1.
Cisco SFE1000P 8-Port 10/100 Ethernet Switch: PoE/Fanless
Product Overview
The Cisco SFE1000P 8-Port 10/100 Ethernet Switch (Figure 1) is an 8-port fully managed 10/100 Ethernet switch
with two Gigabit copper or optical interfaces for connecting to a core switch.
For wireless or voice over IP (VoIP) deployments, the Cisco SFE1000P supports the IEEE 802.3af standard for
Power over Ethernet (PoE). With automatic load sensing, the power control circuitry automatically detects PoE on
end devices before providing power. (PoE is limited to the fixed 10BASE-T/100BASE-TX ports.) The unit can provide
maximum output power of up to 15.4W per PoE port on four ports, or up to 7.5W per PoE port on eight ports
simultaneously. It provides independent overload and short-circuit protection for each port. LED indicators indicate
the power status for each PoE port.
With the enhanced quality of service (QoS) and traffic-management features provided by the Cisco SFE1000P, voice
and video data can be prioritized, ensuring clear and reliable voice communications. An intuitive, secure
management interface enables you to easily set up the QoS parameters, along with the other advanced security and
performance features, resulting in an optimized, more secure network.
© 2008-2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 5
Data Sheet
Eight 10/100 switched RJ-45 ports deliver up to 200 Mbps of throughput per port
Two 10/100/1000 switched RJ-45/ mini Gigabit Interface Converter (mini-GBIC) combo ports
PoE on the 10/100 ports supplies up to the IEEE 802.3af maximum: 15.4W per port for up to four ports, or
7.5W per port on eight ports
5.6-Gbps nonblocking, store-and-forward switching mechanism
Simplified QoS management enabled by queuing techniques using 802.1p, Differentiated Services (DiffServ),
or type of service (ToS) traffic prioritization specifications
WebView management allows configuration and monitoring of the switch using a standard web browser
Secure remote management of the switch via Secure Shell (SSH) and Secure Sockets Layer (SSL) channel
network protocols
802.1q-based VLANs enable segmentation of networks for improved performance and security
Private VLAN Edge (PVE) simplifies network isolation for guest connections or autonomous networks
Automatic configuration of VLANs across multiple switches through Generic VLAN Registration Protocol
(GVRP)/ Generic Attribute Registration Protocol (GARP)
Automatic medium dependent interface (MDI) and MDI crossover (MDI-X) detection
User/network port-level security via 802.1X authentication and MAC-based filtering
Increased bandwidth (up to 8x) and link redundancy with Link Aggregation Control Protocol (LACP)
Enhanced rate-limiting capabilities, including back pressure to control the rate of data flow into and out of a
Provides multicast, broadcast, and flood control
Port mirroring for noninvasive monitoring of switch traffic
Jumbo frame support up to 1632 bytes
Supports Simple Network Management Protocol (SNMP) v1, v2c, and v3
Fully rack-mountable using included rack-mounting hardware
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco SFE1000P 8-Port
10/100 Ethernet Switch.
Table 1.
Specifications for the Cisco SFE1000P 8-Port 10/100 Ethernet Switch: PoE/Fanless
● 8 RJ-45 connectors for 10BASE-T and 100BASE-TX
● 2 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 2 SFP slots
● Console port
● Auto MDI/MDI-X
● Auto-negotiate/manual setting
Cabling type
● Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX
● UTP Category 5 Ethernet or better for 1000BASE-T
10/100 Link/Act, PoE, 2 Giga Link/Act, Speed, System
Power over Ethernet
802.3af compliant
Supplies up to IEEE standard maximum of 15.4W on four 10/100 ports or up to 7.5W on eight 10/100 ports
© 2008-2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 5
Data Sheet
Switching capacity
5.6 Gb nonblocking
Forwarding rate
4.17 mpps wire-speed performance
Layer 2
MAC table size
Number of VLANs
256 active VLANs (4096 range)
Port-based and 802.1q tag-based VLANs; management VLAN
Head-of-line (HOL) blocking
HOL blocking prevention
Web user interface
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
SNMP version 1, 2c, and 3 with support for traps
RFC1213 MIB-2, RFC2863 interface MIB, RFC2665 Ether-like MIB, RFC1493 bridge MIB, RFC2674
extended bridge MIB (P-bridge, Q-bridge), RFC2819 RMON MIB (groups 1,2,3,9 only), RFC2737 entity MIB,
RFC 2618 RADIUS client MIB, RFC 1215 traps, and private PoE MIB
Remote Monitoring (RMON)
Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for
enhanced traffic management, monitoring, and analysis
Firmware upgrade
Web browser upgrade (HTTP) and Trivial File Transfer Protocol (TFTP)
Port mirroring
Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe
Other management
● Traceroute
● SSL security for web user interface
● Dynamic Host Configuration Protocol (DHCP) client
● Simple Network Time Protocol (SNTP)
● Xmodem upgrade
● Cable diagnostics
● Ping
● Telnet client (SSH secure support)
IEEE 802.1x
802.1x - RADIUS authentication, MD5 encryption
Access control lists (ACLs)
Drop or rate limit based on source and destination MAC or IP address, protocol, ToS/DSCP, port, VLAN, and
Ether type
Advanced Security
● IP Source Guard
● STP Root Guard
● Dynamic ARP Inspection
● DHCP Snooping
Link aggregation
Using IEEE 802.3ad LACP, up to 8 ports in up to 8 groups
Storm control
Broadcast, multicast, and unknown unicast
Spanning Tree
IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree, and IEEE 802.1s Multiple Spanning Tree
IGMP (v1/v2) snooping
● Provides for fast client joins and leaves of multicast streams and limits bandwidth-intensive video traffic
to only the requestors
● Supports 256 multicast groups
Quality of Service
Priority levels
4 hardware queues
Priority queuing and weighted round-robin (WRR)
Class of service
● Port based
● 802.1p VLAN priority based
● IPv4/v6 IP precedence/ToS/DSCP-based
● TCP/ User Datagram Protocol (UDP) port-based
● DiffServ
● Classification and re-marking ACLs
© 2008-2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 5
Data Sheet
● Ingress policer
● Egress rate control
Rate limiting
● 802.3 10BASE-T Ethernet
● 802.3u 100BASE-TX Fast Ethernet
● 802.3ab 1000BASE-T Gigabit Ethernet
● 802.3z Gigabit Ethernet
● 802.3x flow control
● 802.3 ad LACP
● 802.3af PoE, 802.1D Spanning Tree Protocol (STP)
● 802.1Q/p VLAN
● 802.1w Rapid STP
● 802.1s Multiple STP
● 802.1x port access authentication
12.01 x 1.73 x 6.69 in.
(305 x 44 x 170 mm)
3.02 lb (1.37 kg)
External AC power adapter
FCC Part 15 Class A, CE Class A, UL, cUL, CE mark, CB
Operating temperature
32° to 104°F (0° to 40°C)
Storage temperature
-4° to 158°F (-20° to 70°C)
Operating humidity
10% to 90%, noncondensing
Storage humidity
10% to 95%, noncondensing
Package Contents
● Cisco SFE1000P 8-port 10/100 Ethernet Switch
● AC power adapter with power cord
● Two rack-mounting kits with 8 screws
● CD-ROM with user guide (PDF)
● Registration card
● Console cable
Minimum Requirements
● Web-based configuration: Java-enabled web browser
● Category 5 Ethernet network cable
● TCP/IP, network adapter, and network operating system (such as Microsoft Windows or Linux) installed on each computer in the network
Product Warranty
Limited lifetime warranty with return to factory replacement, one year telephone support and software fixes for the warranty term.
Service & Support
Cisco Small Business switches are backed by the Cisco Small Business Support Service, which provides affordable
peace-of-mind coverage. This subscription-based service helps you protect your investment and derive maximum
value from Cisco Small Business products. Delivered by Cisco and backed by your trusted partner, this
comprehensive service includes software updates, access to the Cisco Small Business Support Center, and
expedited hardware replacement.
Cisco Small Business products are supported by professionals in Cisco Small Business Support Center locations
worldwide who are specifically trained to understand your needs. The Cisco Small Business Support Community, an
online forum, enables you to collaborate with your peers and reach Cisco technical experts for support information.
© 2008-2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 5
Data Sheet
Cisco Limited Lifetime Hardware Warranty
This Cisco Small Business product offers a limited lifetime hardware warranty with return to factory replacement and
a 1-year limited warranty for fans and power supplies. In addition, Cisco offers telephone technical support at no
charge for the first 12 months following the date of purchase and software bug fixes for the warranty term. To
download software updates, go to:
Product warranty terms and other information applicable to Cisco products are available at
For More Information
For more information on Cisco Small Business products and solutions, visit:
Printed in USA
© 2008-2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 5
Download PDF