Yaesu VL 1000 radio Instructions

Below you will find brief information for radio VL1000. This document provides instructions on how to modify the radio to enable certain features. Specifically, these instructions will allow you to change the radio's settings to be compatible with the US standard. This is a straightforward mod that requires the user to open the radio and modify the settings. The instructions are straightforward and give specific steps to make the adjustments.

PDF Download

Document

KB2LJJ Radio Mods Database and Manuals
Mod for the VL1000
www.r6-ru4montesecchieta.it
IZ5CCV
Turn off power and remove top and bottom cover. Remove the two top screws on the front panel and loosen the two lower ones and lean
the panel forward. Look and see if you have two test points near C1008 if so short them together, if you don't have them then use a
jumper wirer on pin #7 on connector J1015 to ground. With the jumper in place while holding in the FSET-TUNER and 2DISPLAY turn
on power.
The LCD should read SPEC USA. Press the select until it reads GEN. Press the FSET to write the new instructions to the EPROM.
Remove the jumper wirer. Turn the power off and then back on. Turn the amp back off and put the screws back in front panel and tighten
lower ones. Put the covers back on and your set to go. Be careful when you have the covers off not to short anything. Put a board or
something flat and clean under it.
It's a easy mod but be careful, watch out for the wirers on the front panel not to pinch them. GOOD LUCK.
ATTENTION
The KB2LJJ takes no responsibility for any damage during the modification or for any wrong information made on this modification.
http://www.kb2ljj.com/data/yaesu/VL-1000.htm08/09/2009 23:16:12
">

Hello! I am an AI chatbot specifically trained to assist you with the VL 1000 radio Instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated