Energenie | SIS-PWM Silver Shield | User manual | Energenie SIS-PWM Silver Shield User manual

USER MANUAL
HANDBUCH
HANDLEIDING
MANUEL DESCRIPTIF
РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
КЕРІВНИЦТВО КОРИСТУВАЧА
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
Silver Shield(TM) advanced surge protector with
power meter
Silver Shield (TM) Advanced Surge Protector
mit Leistungsmesser
Silver Shield(TM) geavanceerde surge protector
met stroom meter
Silver Shield (TM) de pointe de surtension avec
mesureur de puissance
Silver Shield (TM) Сетевой фильтр с функцией
измерения потребляемой мощности
Silver Shield (TM) Мережевий фільтр з
функцією вимірювання споживаної
потужності
2
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
Features
• USB interface power meter provides readings of voltage, current, power
and energy consumption
• Supplied with the software calculating the energy costs
• Power meter function does not require permanent connection to the
computer
• 6 socket AC power surge protector 230 VAC, 10A
• Protection from surges, spikes, radio-frequency noise (EMI/RFI filter)
• Built-in circuit breaker and overload protection
Specifications
• Power rating: 6 sockets 270 VAC max, 10A max
• USB 1.1 or 2.0 compatible interface: up to 5 m working distance
3
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
• Computer measurements: voltage and current measuring (RMS, peak
values), power measuring (true, apparent, reactive), real and full energy
consumed during a time period (kWH)
• Measurements range: up to 250 VAC, 10 A (RMS), 2500 W, 22.000 kW a
year
• Working conditions: +10...40 Celsius degrees, below 90% humidity
• Measurements accuracy: ± 1% (within 40W-2500W power range)
• Max surge voltage 6000 V, spike current 13500 A
• Automatic circuit breaker: 10 A
• Resistance to short-circuits: 1.5 KV
• Dimenstions: 460 x 140 x 65 mm
• Net weight: 1.3 Kg
1. Introduction
Congratulations on purchasing the SIS-PWM. It is an advanced
surge protector with power metering features.
4
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
2. Indicators and controls of the SIS-PWМ
Measured
sockets
Main rocker
switch
Indicator “Power”
Indicator
“Wiring OK”
Non measured
socket
Indicator
“Wiring Wrong”
Indicator
“Self-test”
Indicator
“Day/Night Mode”
USB socket
5
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
2.1 Right side panel
Circuit breaker
Power cord
6
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
4. Hardware requirements
• Windows XP/2003/Vista/Windows 7
• USB port
5. Package contents
•
•
•
•
SIS-PWM
User manual
USB cable
CD with SIS-PWM Power Meter software for Windows
6. Installation of SIS-PWM
To use SIS-PWM please follow next steps:
1. Install the software.
2. Connect the SIS-PWM to the PC with USB cable.
• Strongly recommended to avoid damp or wet places for
installation;
• SIS-PWM should be connected to the European AC wall
socket of the standard DIN 49 440;
7
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
• It is possible to connect the SIS-PWM to the power source via
other multi-plugs, surge protectors, voltage regulators or UPS.
7. Software installation
a. Insert CD with the software into the PC CD-ROM drive.
b. If for any reason the automatic setup does not work, then open
CD-ROM drive in the “My computer” window and launch SETUP.EXE
from the CD.
Follow instructions of the installation software.
8. Connection of other devices to the SIS-PWM
• The five sockets of the SIS-PWM are used for measuring and
calculation of the total energy and other characteristics, consumed by
the connected equipment. The sum power consumption will be
calculated for all the equipment connected. The sixth socket located on
the opposite side of the main power switch, is not being measured. The
equipment, which power consumption is not needed to be registered,
may be connected into it.
• Multi-plugs and/or surge protectors, if connected to the SISPWM, consume a few energy and influence on measurement results,
therefore it is not suggested to use it.
8
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
9. Operating the SIS-PWM
SIS-PWM has 2 modes of working: on-line mode, when it is
connected to Power Meter software, and off-line mode, when it is
disconnected from computer or Power Meter software is not run. In
online mode, all the power characteristics are calculated and displayed
in Power Meter software window, and energy consumed is being
counted. For online mode, it needs to plug the SIS-PWM to the
computer via USB cable and run Power Meter software. In off-line mode,
the SIS-PWM works as energy meter: only the energy consumed is
being counted. For reading the energy value and calculated cost of
energy it needs to connect the SIS-PWM to computer with the Power
Meter software and to read it from it’s window. When SIS-PWM is
powered off, the energy value is being stored.
10 Power Meter software
The software is used for displaying the characteristics of power
consumption and power mains, calculation the consumed energy in
local currency.
There is a small display window and a main window. Small display
window displays RMS (root mean square) voltage in the power mains
and true power, totally consumed by the connected equipment.
Indicator “V” (means Voltage) lights, when the voltage is above or below
9
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
voltage limits. It warns about dangerous conditions of power mains,
which may cause damage to some equipment. Indicator ‘L” (means
Load) lights or blinks, if the equipment has inductive or capacitive type
of the load. Such equipment may cause EMI noise and voltage spikes
to the power mains. On most such kinds of loads it blinks in the moment
of it’s powering on or off.
Figure 1 – Small display window
Main display window displays power characteristics on the
equipment connected: True (P), Reactive (Q), Apparent (S) power,
power factor (cos fi), energy consumed (Ep), apparent energy (Es), rms
current (I rms), peak current (I peak), active ( R ) and reactive (X)
impedance, rms voltage (Vrms), peak voltage (Vpeak). Additionaly, it
shows the cost of energy consumed (money sign) since the previously
set date. Energy and cost values may be reset to zero and current date
will be set as start point, when pressing “Reset” button.
10
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
Figure 2 – Main display window
The energy rate settings are set in a window, which is popped up
upon pressing “Set” button near the “Cost” indicator. Choose cost rate
(per kWh), currency type and press “OK” for applying the changes. If
rate differs in day and night, check “Use Day/Night modes” and input
rates, day and night start times.
11
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
For setting voltage warning limits – press “Set” button nearby and
input it in newly opened window.
Figure 3 – Energy rate settings window
While running Power Meter software logs measured power
consumption to MS Access database file log.mdb located in the
application directory. One can view logged data in the form of a chart
by selecting “Show chart” tray menu item. There are two display options
In the chart window (Figure 4.) : “Power consumed” and “Money spent”
allowing to switch between those two values in the chart. Note that
12
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
periods of time when software was quit are shown as grayed out areas
in the chart. By clicking “Export” button one can export data from
database file to MS Excel file. Use “Clear & Close” button to purge
logged data.
Figure 4 – Chart window
13
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
11. Indicators
• Indicator “Self-test” is on – hardware self test was passed
successfully
• Indicator “Day/Night mode” is on – means a day time, if
day/night mode is enabled or if this mode is disabled
• Main rocker switch is light up – means SIS-PWM is connected
to the power supply, there is power on all the sockets, the energy
consumed is being counted
• “Wrong” indicator lights up, “OK” doesn’t light up - it means that
the wall socket is wrongly wired. It is recommended to fix the wiring
• Indicators “OK” and “Wrong” light up together - it means that the
wall socket has problems with grounding. It is recommended to fix the
grounding of the wall socket
14
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
12. Troubleshooting
Problem
The circuit breaker is activated.
(Tripped)
Indicator “Self-test” is off
Software reports "Device I/O request
error".
Solution
The load connected to the unit is too
high, some of the devices connected
to the SIS-PWM should be
disconnected and the circuit breaker
should be reset.
SIS-PWM measuring circuit is
damaged and shall be repaired
Check if SIS-PWM is properly
connected to your computer, check
if the USB connectors/cables are not
damaged. If you use a USB hub,
make sure it is not defective.
15
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
16
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
17
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
WARRANTY CONDITIONS
The warranty period is 36 months and begins with
the sale to the end user. The receipt must clearly list
the date of purchase and the part number, in addition
it should be printed. Keep the receipt for the entire
warranty period since it is required for all warranty
claims. During the warranty period the defective
items will be credited, repaired or replaced at the
manufacturer's expense. Work carried out under the
warranty neither extends the warranty period nor
starts a new warranty period. The manufacturer
reserves the right to void any warranty claim for
damages or defects due to misuse, abuse or
external impact (falling down, impact, ingress of
water, dust, contamination or break). Wearing parts
(e.g. rechargeable batteries) are excluded from the
warranty. Upon receipt of the RMA goods, Gembird
Europe B.V. reserves the right to choose between
replacement of defective goods or issuing a credit
note. The credit note amount will always be
calculated on the basis of the current market value of
the defective products
Gembird Europe B.V.
Wittevrouwen 56, 1358CD Almere
The Netherlands
www.gembird.nl/support
support@gmb.nl
Tel. +31-36-5211588
(0900-4362473 inside The Netherlands, € 0,15 p/m,
mobile costs not included)
GARANTIE BEDINGUNGEN
Die Garantie beträgt 36 Monate ab Verkaufsdatum
an den Endverbraucher. Das Kaufdatum und der
Gerätetyp sind durch eine maschinell erstellte
Kaufquittung zu belegen. Bitte bewahren Sie Ihren
Kaufbeleg daher für die Dauer der Garantie auf, da
er Voraussetzung für eine eventuelle Reklamation
ist. Innerhalb der Garantiezeit werden alle Mängel,
wahlweise durch den Hersteller entweder durch
Instandsetzung, Austausch mangelhafter Teile oder
im Austausch, behoben. Die Ausführung der
Garantieleistung bewirkt weder eine Verlängerung
noch einen Neubeginn der Garantiezeit.
Eine Garantieleistung entfällt für Schäden oder
Mängel die durch unsachgemäße Handhabung oder
durch äußere Einwirkung (Sturz, Schlag, Wasser,
Staub, Verschmutzung oder Bruch) herbeigeführt
wurden. Verschleißteile (z.B. Akkus) sind von der
Garantie ausgenommen.
Gembird Deutschland GmbH
Overweg 27, 59494 Soest
Deutschland
www.gembird.de/support
support@gembird.de
Tel. +49-180 5-436247
€0,14 aus dem deutschen Festnetz. Mobilfunkpreise
können abweichen
18
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
GARANTIE VOORWAARDEN
CONDITIONS DE GARANTIE
De garantietermijn bedraagt 36 maanden en gaat in
op de aankoopdatum van het product door de
eindgebruiker. Op de aankoopbon moeten de
aankoopdatum en productomschrijving duidelijk
vermeld staan. Gelieve de aankoopbon de gehele
garantieperiode te bewaren, deze is ten alle tijden
benodigd voor alle garantie aanspraken. Tijdens de
garantieperiode zullen alle gebreken verholpen of
vervangen worden door de fabrikant d.m.v. reparatie,
omruiling van het defecte onderdeel of het gehele
apparaat. Aanspraken tijdens de garantieperiode
leiden niet tot verlenging hiervan. Garantieaanspraak
vervalt bij schade of gebreken die ontstaan zijn door
oneigenlijk gebruik, misbruik of invloeden van
buitenaf (vallen, stoten, water, stof, vuil of breken).
Slijtagegevoelige onderdelen (b.v. batterijen) zijn
uitgesloten van garantie. Bij ontvangst van de RMA
goederen behoudt Gembird zich het recht om te
kiezen tussen vervanging van de defecte waren of
het uitgeven van een kreditnota. Het bedrag van de
kreditnota zal altijd gecalculeerd zijn op basis van de
huidige marktprijs voor het defecte produkt.
Garantie est de 36 mois a partir de la date d’achat de
l'utilisateur final.
Le talon de garantie doit énumérer clairement la date
d'achat et le type d'appareil.
Conservez le reçu d'achat pendant toute la durée de la
garantie car elle est nécessaire pour toute réclamation.
Au cours de la période de garantie tous les défauts
doivent être remplacé aux frais du fabricant, soit par la
réparation ou la remplacement de la pièce défectueuse
ou l'ensemble du produit.
Les travaux effectués sous garantie ne prolongent pas la
période de garantie ni ne commencent pas une nouvelle
période de garantie.
Le fabricant se réserve le droit d'annuler toute demande
de garantie pour les dommages ou défauts dus à une
mauvaise utilisation, abus ou les effets externes (chute,
choc, pénétration de l'eau, la poussière, etc..).
Les pièces d'usure (par exemple les piles rechargeables)
sont exclus de la garantie.
Dès réception de la marchandise sous garantie, le SAV
de Gembird Europe BV se réserve le droit de choisir
entre le remplacement des produits défectueux ou de
délivrer un avoir.
Le montant d’avoir sera toujours calculée sur la base de
la valeur actuelle du marché des produits défectueux.
Gembird Europe B.V.
Wittevrouwen 56, 1358CD Almere
The Netherlands
www.gembird.nl/support
support@gmb.nl
Tel. 0900-4362473
€ 0,15 p/m binnen Nederland
Exclusief mobiele telefoonkosten
Gembird Europe B.V.
Wittevrouwen 56
1358CD Almere, The Netherlands
www.gembird.nl/support
support@gmb.nl
Tel. +31 (0)900 4362473
Prix d'appel depuis telephone fixe Pays-Bas : 0.15 euro / min
Prix d'appel depuis telephone mobile / autre pays - selon
operateur
19
All brands and logos are registered trademarks of their respective owners
SIS-PWM Silver Shield(TM) advanced
surge protector with power meter
ГАРАНТИЙНЫЙ ТАЛОН
1. Гарантийное обслуживание предоставляется в течение
срока гарантии, при наличии правильно и четко заполненного
гарантийного талона, и изделия в полной комплектации.
Серийный номер и модель изделия должны соответствовать
указанным в гарантийном талоне.
2. Гарантийное обслуживание представляет собой бесплатное
устранение всех неполадок (ремонт), или замену изделия на
новое (аналогичное).
3. Гарантия не распространяется на неисправности,
вызванные следующими причинами:
• использование изделия не по назначению.
• нарушение условий эксплуатации, хранения или перевозки
изделия, которые указаны в настоящей инструкции.
• подключение нестандартных или неисправных периферийных
устройств, аксессуаров.
• механические повреждения, попадание внутрь изделия
посторонних предметов, веществ, жидкостей, насекомых.
• ремонт изделия не уполномоченными на то лицами.
4. Комплектность и внешний вид изделия проверяются
Покупателем при получении товара в присутствии персонала
фирмы.
Послепродажные претензии по укомплектованности и
внешнему виду не принимаются.
УМОВИ ГАРАНТІЙНОГО ОБСЛУГОВУВАННЯ
1. Гарантійне обслуговування надається протягом терміну
гарантії, при наявності Гарантійного талону, заповненого
належним чином, та виробу в повній комплектації.
2. Гарантійне обслуговування не підтримується в разі
порушення правил експлуатації, зберігання або перевезення
виробу, що зазначені в інструкції по експлуатації виробу.
3. Гарантійне обслуговування скасовується у випадках:
- наявності механічних пошкоджень або слідів стороннього
втручання;
- пошкодження викликані стихійним лихом або нещасним
випадком, включаючи й блискавку, потраплянням у виріб
сторонніх предметів, рідин, комах, тощо;
- пошкодження викликані застосуванням або підключенням
нестандартних або несправних периферійних пристроїв,
аксесуарів;
4. Гарантія не поширюється на витратні матеріали та додаткові
аксесуари;
З гарантійними умовами згоден.
Підпис покупця: ____________________
ГАРАНТІЙНИЙ ТАЛОН № __________________________
Товар/модель ____________________________________
Наименование изделия: ___________________________
Серійний номер __________________________________
Модель _________________________________________
Термін гаранії ____________________________________
Серийный номер _________________________________
Дата продажу ____________________________________
Срок гарантии ___________________________________
Продавець (назва, телефон)
Дата продажи «____» ___________________ 20____ года
_________________________________________
Фирма-продавец: _________________________________
Адрес и телефон фирмы-продавца:
________________________________________________
М.П. С условиями гарантии ознакомлен и согласен:
Продавец: _____________ Покупатель: _____________
Печатка та підпис продавця
_________________________________________
З гарантійних питань звертайтесь до сервісних центрів
Gembird. Про адреси та контакти Ви можете дізнатись на сайті
www.gembird.ua або по телефону 044-4510213.
20
All brands and logos are registered trademarks of their respective owners
Download PDF