Spyder RT Slip-On Instructions

Spyder RT Slip-On Instructions
Installation Instructions
1. Make sure the bike is completely cool before starting the
installation. Make sure the bikes parking brake is set.
7. Install supplied TBR muffler hanger bracket using the
OEM bolt and nut.
2. Remove OEM heat shield.
Can-Am
SPYDER RT
V.A.L.E.™ Slip-on Exhaust System with M-5 Canister
Part # 005-3230420V-B / 005-3230419V-B
3. Remove OEM muffler joint.
4. Remove OEM muffler mounting bolt, this bolt will
be re-used.
8. Loosely attach TBR slip-tube to muffler using the supplied
2-piece X-ring with the supplied (4) 6x20mm socket head
cap screws and lock washers.
IMPORTANT - PLEASE READ CAREFULLY
We recommend that this performance part be installed by a qualified motorcycle
technician. If you have any doubts as to your ability to install this performance
part, please consult with your local motorcycle dealer. Read all instructions
first before starting installation. Make sure the motorcycle and exhaust system
are completely cool before starting the installation. Be sure to save all stock
components for possible use later.
**This product has not been tested with all available accessories and some
items may cause excessive heat. Excessive heat may cause damage to your
vehicle. Two Brothers Racing will not be responsible for damaged parts.
5. Remove OEM muffler assembly.
6. Remove OEM muffler joint gasket.
Installation Instructions
9. Loosely Install supplied barrel-clamp on slip-tube end.
10.
13. Install TBR heat shield to slip-tube using the OEM heat
shield mounting bolts.
assembly.
Can-Am
SPYDER RT
V.A.L.E.™ Slip-on Exhaust System with M-5 Canister
Part # 005-3230420V-B / 005-3230419V-B
14. Double check all your work.
11.
15.
cap screws, 50mm spacer, and 8mm lock nut.
dirt, as any oily residue will etch the metal and become
somewhat permanent when the system gets hot. Run
the bike and enjoy. It is normal for some white smoke to
manufacturing oil from inside the pipe burnin g off.
miles, recheck all fasteners for tightness.
Care & Cleaning
Care & Cleaning
Keep system free of dirt and moisture. Store in a cool, dry place. Make sure vehicle is
completely cool before maintenance.
Stainless Header System: Polished stainless steel pipes will turn a light golden hue
after a few heat cycles, this is a normal characteristic of high quality stainless steel.
Clean using a mild water based spray cleaner. Always apply cleaner or polish with a
soft, clean cloth.
Titanium Header System: Polished titanium pipes will experience color shift ranging
from deep blue/purple through amber after a few heat cycles. This is a normal
characteristic of high quality titanium. Clean using a mild water based spray cleaner.
Always apply cleaner or polish with a soft, clean cloth.
Parts List
Qty.
1
1
1
1
1
1
1
1
1
1
1
1
Description
Slip-On Tube
HARDWARE KIT
X-Ring Kit
Barrel Clamp 68mm
Spyder Heat Shield
Spyder Mounting Bracket
8x65mm Socket Head Cap Screw
50mm Spacer
8mm Lock Nut
TBR Sticker Kit
Part Number
Varies
005-32304S
005-5C3
005-323-3
005-7-2-3KIT
005-27-68MSH
005-283-HS
005-283-B
005-SH865
005-S-50
005-FNL8
015-10212
Polished Aluminum Canisters: Use an aluminum or mag wheel polish to restore the
12.
Brushed Aluminum Canisters: Clean using a mild water based spray cleaner. Always
apply cleaner or polish with a soft, clean cloth.
Carbon Fiber Canisters: Clean using a mild water based spray cleaner. Always apply
cleaner or polish with a soft, clean cloth. Always make sure t
is in good condition and not burned out, as exhaust heat inside an empty canister will
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include
everything you need to easily do it yourself.
For cleaning use a mild water based spray cleaner. Always apply
cleaner or polish with a soft, clean cloth. Always make sure t
is in good condition and not burned out, as exhaust heat inside an empty canister will
TBR sells repack kits (Road - #005-10038, Offroad - #005-10038MX) that include
everything you need to easily do it yourself.
Repack all road canisters every 3,000 miles. Part #005-10038
Repack all offroad canisters after every 10 hours of use. Part #005-10038MX
installed - the
NEVER
intense heat and lack of cooling air can quickly burn through the canister material. Two
Brothers Racing does not provide a warranty for burned canisters.
Warranty
Two Brothers Racing products are intended for closed course competition purposes
only, and therefore are sold “as is” without warranty. Two Brot
ticular purpose and
disclaims all responsibility for consequential and incidental damages or any other losses
arising from the use of these products or parts.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement