Fortin Evo One remote starter Installation guide
Below you will find brief information for Evo One. The Evo One is an easy-to-install remote starter for Subaru BR-Z and Scion FR-S vehicles. It allows you to start your vehicle remotely using a key fob, and also offers features such as door lock/unlock, trunk open, parking lights, and tachometer monitoring. The Evo One can be programmed to lock the vehicle after remote start, and it also comes with an immobilizer bypass feature to prevent unauthorized starting.
PDF
Download
Document
Advertisement
Advertisement
(~)IMO ONE Page 1 / 8 GUIDE # 35081 REV.: 20151006 SUBARU ADDENDUM - SUGGESTED WIRING CONFIGURATION ADDENDA - SCHÉMA DE BRANCHEMENT SUGGÉRÉ Vehicle functions supported in this diagram (functional if equipped) | Fonctions du véhicule supportées dans ce diagramme (fonctionnelles si équipé) Lock Unlock Arm Disarm Trunk (open) Parking Lights Tachometer Door Status Trunk Status Hand-Brake Status Foot-Brake Status Secure Take Over OEM Remote monitoring* VEHICLE VEHICULES SCION FR-S SUBARU BR-Z Immobilizer bypass Contournement d’immobilisateur PUSH START Push-to-Start 2013-2015 • • • • • • • • • • • • • • Push-to-Start 2013-2015 • • • • • • • • • • • • • • YEARS ANNÉES BYPASS FIRMWARE VERSION VERSION LOGICIELLE CONTOURNEMENT This manual may change without notice. www.fortinbypass.com for latest version. Ce Guide peut faire l’objet de changement sans préavis. www.fortinbypass.com pour la récente version. 79.[29] TOYOTA/LEXUS MINIMUM Program remote starter option: Programmez l’option démarreur à distance: FUNCTION FONCTION MODE 6 3 DESCRIPTION Lock after remote-start Verrouille après le démarrage à distance NOTES *OEM Remote monitoring 1X The vehicles OEM remote will not be operable during remote start. La télécommande d’origine du véhicule ne sera pas fonctionnelle durant le démarrage à distance. Parts required (Not included) Pièce(s) requise(s) (Non incluse(s)) 2X 1 AMP Diode (Manual transmission only) 2X Diodes 1 AMP (Transmission manuelle seulement) FLASH LINK UPDATER 2 FLASH LINK UPDATER 2 Microsoft Windows Computer & Internet connection Ordinateur Microsoft Windows & connection Internet This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. Page 2 / 8 DESCRIPTION | DESCRIPTION Behind glove box À l’arrière de la boîte à gants At BCM, driver side Au BCM, côté conducteur SmartKey module Behind glove box Module de clé intelligente À l’arrière de la boîte à gants (-)PARKING LIGHTS (-)HORN At blower relay behind glove box Au relai du ventillateur derrière la boîte à gants (+)CLUTCH* (+)IGNITION2 (+)STARTER (+)12V *(+)CLUTCH : Manual transmission Transmission manuelle (+)IGN. (+)ACC. ECU module Behind glove box Module ECU À l’arrière de la boîte à gants (+)START STOP (~)CAN LOW (~)CAN HIGH (~)IMO PUSH START This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. Page 3 / 8 AUTOMATIC TRANSMISSION WIRING CONNECTION | SCHÉMA DE BRANCHEMENT TRANSMISSION AUTOMATIQUE (+)Ignition (-)Horn (~) IMO (-)Parking Lights HOOD PIN CONTACT CAPOT (-)Hood (-)Start/Stop Yellow Purple Purple/White Green White Orange Orange/Black Dk.Blue Red/Blue Lt.Blue/Black Black Pink Yellow/Black Brown/White Pink/Black Purple/Yellow Green/White Green/Red White/Black Lt.Blue (+)Ignition2 (+)Accessory (+)12V (-)Ground (+)Ignition (+)Starter In Out Out Out Out Out Out Out In In/Out In Out Out In In In/Out In/Out In/Out Out In/Out A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 CUT LOOP FOR AUTOMATIC TRANSMISSION MODE. COUPEZ LA BOUCLE POUR LE MODE TRANSMISSION AUTOMATIQUE. Out E1 White Out E2 Orange In E3 Red In E4 Black Pink In/Out E5 Out E6 Yellow C5 C4 C3 C2 C1 Brown CAN LOW Gray/Black CAN HIGH Gray Orange/Brown Orange/Green D6 D5 D4 D3 D2 D1 White/Red White/Blue White/Green Yellow/Red Yellow/Blue Yellow/Green (~) IMO (~) IMO Ground D3 A7 (-)HORN BR-Z FR-S Blue Bleu Blue Bleu A12 (-)PARKING LIGHTS E1 (+)IGNITION2 Tan Beige Tan Beige Purple Mauve Purple Mauve 6 5 4 Back view White 36-pin connector At BCM, driver side Vue de dos Connecteur Blanc, 36-pins. Au BCM, côté conducteur 3 2 1 18 17 16 15 14 13 12 11 10 9 8 7 30 29 28 27 26 25 24 23 22 21 20 19 Back view - White 30-pin connector At BCM, driver side Vue de dos Connecteur Blanc, 30-pins. Au BCM, côté conducteur E6 (+)STARTER Pink Rose Pink Rose 1 2 10 9 8 18 17 16 15 7 6 5 14 13 4 A19 (-)START STOP E5/A1 (+)IGNITION1 Tan Beige Tan Beige White Blanc White Blanc E2 (+)ACCES -SORY Lt.Blue Bleu Pâle Lt.Blue Bleu Pâle 7 6 5 4 3 2 1 3 18 17 16 15 14 13 12 11 10 9 8 7 12 11 30 29 28 27 26 25 24 23 22 21 20 19 Back view - White 18-pin connector Vue de dos - Connecteur Blanc, 18-pins. 6 5 C4 (~)CAN LOW C3 (~)CAN HIGH Red Rouge Red Rouge Green Vert Green Vert 4 3 2 Cut D1/A10 E3 (~)IMO (+)12V Yellow Jaune Yellow Jaune Red Rouge Red Rouge 1 19 18 17 16 15 14 13 12 11 10 9 8 27 26 25 24 23 22 21 20 35 34 33 32 31 30 29 28 Back view - White 30-pin connector Vue de dos - Connecteur Blanc, 30-pins. SmartKey module. Behind glove box Module de clé intelligente. À l’arrière de la boîte à gants Back view - White 35-pin connector ECU module Behind glove box Vue de dos Connecteur Blanc, 35-pins.Module ECU À l’arrière de la boîte à gants Back view White 9-pin connector At blower relay Vue de dos Connecteur Blanc, 9-pins. Au relay de ventillation This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. Page 4 / 8 MANUAL TRANSMISSION WIRING CONNECTION | SCHÉMA DE BRANCHEMENT TRANSMISSION MANUELLE (+)Ignition (-)Horn (~) IMO (-)Parking Lights HOOD PIN CONTACT CAPOT (-)Hood (-)Start/Stop Yellow Purple Purple/White Green White Orange Orange/Black Dk.Blue Red/Blue Lt.Blue/Black Black Pink Yellow/Black Brown/White Pink/Black Purple/Yellow Green/White Green/Red White/Black Lt.Blue (+)Ignition2 (+)Accessory (+)12V (-)Ground (+)Ignition (+)Starter In Out Out Out Out Out Out Out In In/Out In Out Out In In In/Out In/Out In/Out Out In/Out A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 Out E1 White Out E2 Orange In E3 Red In E4 Black Pink In/Out E5 Out E6 Yellow C5 C4 C3 C2 C1 Brown CAN LOW Gray/Black CAN HIGH Gray Orange/Brown Orange/Green D6 D5 D4 D3 D2 D1 White/Red White/Blue White/Green Yellow/Red Yellow/Blue Yellow/Green (~) IMO (~) IMO Ground 1A de de io io D D 1A A7 (-)HORN BR-Z FR-S Blue Bleu Blue Bleu A12 (-)PARKING LIGHTS E6 (+) CLUTCH E1 (+)IGNITION2 Tan Beige Tan Beige Yellow Jaune Yellow Jaune Purple Mauve Purple Mauve 6 5 4 Back view White 36-pin connector At BCM, driver side Vue de dos Connecteur Blanc, 36-pins. Au BCM, côté conducteur 3 2 1 18 17 16 15 14 13 12 11 10 9 8 7 30 29 28 27 26 25 24 23 22 21 20 19 Back view - White 30-pin connector At BCM, driver side Vue de dos Connecteur Blanc, 30-pins. Au BCM, côté conducteur D3 E6 (+)STARTER Pink Rose Pink Rose 1 2 10 9 8 18 17 16 15 7 6 5 14 13 4 A19 (-)START STOP E5/A1 (+)IGNITION1 Tan Beige Tan Beige White Blanc White Blanc E2 (+)ACCES -SORY Lt.Blue Bleu Pâle Lt.Blue Bleu Pâle 7 6 5 4 3 2 1 3 18 17 16 15 14 13 12 11 10 9 8 7 12 11 30 29 28 27 26 25 24 23 22 21 20 19 Back view - White 18-pin connector Vue de dos - Connecteur Blanc, 18-pins. 6 5 C4 (~)CAN LOW C3 (~)CAN HIGH Red Rouge Red Rouge Green Vert Green Vert 4 3 2 Cut D1/A10 E3 (~)IMO (+)12V Yellow Jaune Yellow Jaune Red Rouge Red Rouge 1 19 18 17 16 15 14 13 12 11 10 9 8 27 26 25 24 23 22 21 20 35 34 33 32 31 30 29 28 Back view - White 30-pin connector Vue de dos - Connecteur Blanc, 30-pins. SmartKey module. Behind glove box Module de clé intelligente. À l’arrière de la boîte à gants Back view - White 35-pin connector ECU module Behind glove box Vue de dos Connecteur Blanc, 35-pins.Module ECU À l’arrière de la boîte à gants Back view White 9-pin connector At blower relay Vue de dos Connecteur Blanc, 9-pins. Au relay de ventillation This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. Page 5 / 8 | PROCÉDURE DCRYPTOR PROGRAMMING PROCEDURE DE PROGRAMMATION AVEC DCRYPTEUR PROGRAMMING PROCEDURE 1/2 | PROCÉDURE DE PROGRAMMATION 1/2 Parts required (not included) Pièces requises (non incluses) 1x 1x FLASH LINK UPDATER 2, FLASH LINK MANAGER software 1x 1x Microsoft Windows Computer with Internet connection 1x 1x FLASH LINK UPDATER 2, Programme FLASH LINK MANAGER Ordinateur Microsoft Windows avec connection Internet 1 H B C D x1 G F A E J I HOLD Appuyez et maintenir le bouton de programmation enfoncé: Branchez le harnais Principal à 6-Pins (connecteur Blanc) Press and hold the programming button: Connect the 6-PIN Main harness (White connector). LED may differ depending on the module casing. L’apparence des DELS peut différer selon le boîtier du module. The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate. Les DELs Bleue, Rouge, Jaune et Bleue & Rouge s'illumineront alternativement. Release the programming button when the LED’s are BLUE & RED. Relâchez le bouton de programmation quand les DELs sont BLEU et ROUGE. If the LED’s are not solid BLUE and RED disconnect the 6-Pin connector (Main-Harness) and go back to step 1. Si le DEL ne sont pas BLEU et ROUGE débranchez le connecteur 6 pins (Connecteur principal) et allez au début de l'étape 1. Insert the required remaining connectors. Insérez les connecteurs requis restants. Press and release the programming button six time (6x). Appuyez et relâchez 6 fois le bouton de programmation. B D B H C D C H B J E H I I G F G F G F A A A E E E G F J J I A C D J I 4 H B C D PAUSE 5XFLASH PAUSE G F A E J PRESS PRESS X6 I x6 ... ... ... The RED and BLUE LED will flash 5 times each second. Les DELs ROUGE et BLEUE clignotent 5 fois chaque seconde. 5 x1 x1 T C D J I E F G A START LO CK START FLASH 10X FLASH x1 x1 PRESS PRESS OFF OFF x1 x1 ALTERNATE | ALTERNE PRESS START PRESS START 6 F OF PRESS LO CK OFF ACC ON START PRESS H START FLASH 10X ACC ON PUSH x1 x1 START B AR ST PRESS PRESS PUSH OFF Start the engine : the brake pedal. Start Press the engine : Press the Push-to-Start Press the the brake pedal. Start engine. to start the engine. Pressbutton the Push-to-Start button to start the engine. The RED LED will flash rapidly 10x times. Key bypass programmed. Démarrez le moteur: Appuyez sur la pédale de frein. Démarrez le moteur: Appuyez 1pédale fois surdelefrein. bouton Appuyez sur lale Démarrez moteur démarrage (Push-to-Start) Appuyez 1 fois sur le bouton pour démarrer le moteur. pour démarrage (Push-to-Start) démarrer le moteur. La DEL ROUGE clignotera 10x fois rapidement. Contournement de clé Éteindre le moteur : programmé. Stop the engine: the Push-to-Start button Appuyez 1 fois Stop Press the engine: Éteindre le moteur : sur le bouton to turn off the button ignition. Appuyez démarrage (Push-to-Start) Pressonce the Push-to-Start 1 fois sur le bouton pour éteindre l'ignition. once to turn (Push-to-Start) Waitoffforthe theignition. BLUE LED will démarrage Attendre que la DEL pour éteindre flash rapidly. BLEUEl'ignition. clignote rapidement. Start the engine : PressStart the brake pedal.: thefor engine Wait the YELLOW and PressPress the Push-to-Start the brake pedal. RED LED will alternate. buttonPress to start engine. thethe Push-to-Start button to start the engine. Démarrez le moteur: Appuyez sur la pédale de frein. Démarrez le moteur: Attendre les DELs Appuyez 1 fois sur surque le pédale boutonde frein. Appuyez la JAUNE et ROUGE alternent. démarrage (Push-to-Start) Appuyez 1 fois sur lepour bouton démarrer le moteur. démarrage (Push-to-Start) pour démarrer le moteur. Stop the engine: Éteindre le moteur : PressStop the Push-to-Start Appuyez 1 foislesur le bouton the engine: button Éteindre moteur : theoffengine: Éteindre le1moteur onceStop to turn ignition. button démarrage (Push-to-Start) Press the the Push-to-Start Appuyez fois sur: le bouton éteindre l'ignition. oncethe to turn offthe the ignition. pourTournez démarrage (Push-to-Start) la clé à la Turn key to pour éteindre l'ignition. position Arrêt (OFF). OFF position. CONTINUED NEXT PAGE | CONTINUEZ À LA PAGE SUIVANTE C B H E J A F G H B C D 3 A RED ROUGE F ON I BLUE BLEU E J I ON G H B C D RELEASE D 2 This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. Page 6 / 8 KEY BYPASS PROGRAMMING PROCEDURE 2/2 | PROCÉDURE DE PROGRAMMATION CONTOURNEMENT DE CLÉ 2/2 J D C H C Disconnect all connectors and after the 6-Pin (Main-Harness) connector. F A E C H G G F F A A B E E D G J I J I H H B B D B C I D 7 E J I J H B G F C D A Débranchez tous les connecteurs et ensuite le connecteur 6-pins (Connecteur principal). F G A E I 8 D B C Connect the module to the FLASH LINK UPDATER 2 and visit the DCryptor menu in the Flash-Link Manager. E J F G A I H Parts required (not included) Pièces requises (non incluses) Branchez le module au FLASH LINK UPDATER 2 et visitez le menu DCryptor dans le Flash-Link Manager. FLASH LINK UPDATER 2 FLASH LINK UPDATER 2 FLASH LINK MANAGER SOFTWARE | PROGRAMME Microsoft Windows Computer with Internet connection Ordinateur Microsoft Windows avec connection Internet 9 C H B D AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 6-Pin (MainHarness) connector and after all the remaining connector. F D G B H B H C B C D D G F A E E A A E E J I J I G F G F A F G I J H H B J C C A E D J I I The module is now programmed. Le module est programmé. APRÈS LA PROCÉDURE DE PROGRAMMATION DCRYPTOR COMPLETÉE : retournez au véhicule et rebranchez le connecteur 6-pins (Connecteur principal) et après tous les connecteurs. REMOTE STARTER / ALARM VERIFICATION PROCEDURE | PROCÉDURE DE VÉRIFICATION DU DÉMARREUR À DISTANCE / ALARME Test the remote starter. Remote start the vehicle. Testez le démarreur à distance. Démarrez le véhicule à distance. This guide may change without notice. See www.fortin.ca for latest version. Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version. Page 7 / 8 REMOTE STARTER PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION DU DÉMARREUR À DISTANCE et des telecommandes. REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING. RÉFÉREZ-VOUS AU GUIDE D’INSTALLATION RAPIDE INCLUS AVEC LE MODULE POUR LA PROGRAMMATION DU DÉMARREUR À DISTANCE. VEHICLE EQUIPPED WITH OEM ALARM | VÉHICULE ÉQUIPPÉS D’UNE ALARME D’ORIGINE Some vehicles must be UNLOCKED to disarm the OEM alarm before remote start. Enable option D2 using the FlashLink Manager. When this option is enabled the module will automatically UNLOCK before remote start and LOCK after the vehicle has remote started. Certains véhicules doivent être DÉVERROUILLÉS avant le démarrage à distance pour désarmer l’alarme d’origine. Activez l’option D2 avec le FlashLink Manager. Lorsque cette option est activée, le module déverrouille automatiquement avant le démarrage à distance et reverrouille après que le véhicule a démarré à distance. REMOTE STARTER FUNCTIONNALITY | FONCTIONNALITÉS DU DÉMARREUR À DISTANCE Start x1 PRESS All doors must be closed. Remote start the vehicle. Toutes les portes doivent être fermées Démarrez à distance. Enter the vehicle with the SMART-KEY. Entrez dans le véhicule avec la clé intelligente (SMART-Key) sur vous ON DO NOT PRESS THE BRAKE PEDAL. Press and release the Push-to-Start button once. NE PAS APPUYER LA PÉDALE DE FREIN. Appuyez et relâchez une fois le bouton démarrage (Push-to-Start. Press the brake pedal. The vehicle can now be put in to gear and driven. If the Smart-Key is not detected the vehicle will shut down. Appuyez sur la pédale de frein. Vous êtes maintenant prêt à embrayer et prendre la route. Si la clé intelligente n'est pas détectées le véhicule s'éteindra. Page 8 / 8 ONE HARDWARE VERSION FIRMWARE VERSION Date: xx-xx INTERFACE MODULE PATENTS PENDING US: 2007-228827-A1 Made in Canada Service No : www.fortinbypass.com 000 102 04 2536 Module label | Étiquette sur le module Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product. Notice: Mise à jour microprogramme et Guides d’installations Des mises à jour du Firmware (microprogramme) et des guides d’installation sont mis en ligne régulièrement. Vérifiez que vous avez bien la dernière version logiciel et le dernier guide d’installation avant l’installation de ce produit. WARNING The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version. MISE EN GARDE L’information de ce guide est fournie sur la base de représentation (telle quelle) sans aucune garantie de précision et d’exactitude. Il est de la seule responsabilité de l’installateur de vérifier tous les fils et circuits avant d’effectuer les connexions. Seuls une sonde logique ou un multimètre digital doivent être utilisés. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité de l’exactitude de l’information fournie. L’installation (dans chaque cas) est la responsabilité de l’installateur effectuant le travail. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité suite à l’installation, que celle-ci soit bonne, mauvaise ou de n’importe autre type. Ni le manufacturier, ni le distributeur ne se considèrent responsables des dommages causés ou ayant pu être causés, indirectement ou directement, par ce module, excepté le remplacement de ce module en cas de défectuosité de fabrication. Ce module doit être installé par un technicien qualifié. L’information fournie dans ce guide est une suggestion. Ce guide d’instruction peut faire l’objet de changement sans préavis. Consultez le www.fortinbypass.com pour voir la plus récente version. Copyright © 2006-2014, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING TECH SUPPORT Tél: 514-255-HELP (4357) 1-877-336-7797 ADDENDUM GUIDE www.fortinbypass.com WEB UPDATE | MISE À JOUR INTERNET ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Remote start
- Immobilizer bypass
- Door lock/unlock
- Trunk open
- Parking lights
- Tachometer monitoring
- Automatic/Manual transmission support
- Easy installation
Frequently asked questions
The Evo One supports Subaru BR-Z and Scion FR-S vehicles with a push-to-start system, manufactured between 2013 and 2015.
The Evo One offers a variety of features, including remote start, immobilizer bypass, door lock/unlock, trunk open, parking lights, and tachometer monitoring.
The Evo One can be programmed using the FlashLink Manager software and the FlashLink Updater 2 device.
The Evo One's immobilizer bypass feature allows you to use your original key fob to unlock and start the vehicle.