DMP Electronics | DIN PC-333x Series | User`s guide | DMP Electronics DIN PC-333x Series User`s guide

DIN PC-333x Series
User’s Guide
Copyright
The information in this manual is subject to change without notice for continuous
improvement in the product. All rights are reserved. The manufacturer assumes no
responsibility for any inaccuracies that may contain in this document, and makes no
commitment to update or to keep current information contain in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole
or in part, in any form or by any means without the prior written permission of
DMP Electronics Inc.
Copyright 2014 DMP Electronics Inc.
Special Notice to Users
DMP Electronics Inc. provides no warranty with regard to this manual, the software, or
other information contained herein and hereby expressly disclaims any implied
warranties of merchantability or fitness for any particular purpose with regard to this
manual, the software, or such other information. In no event shall DMP Electronics be
liable for any incidental, consequential, or special damages, whether based on tort,
contract, or otherwise, arising out of or in connection with this manual, the software, or
other information contained herein or the use thereof.
DMP Electronics reserves the right to make any modification to this manual or the
information contained herein at any time without notice. The software described herein
is governed by the terms of a separated user license agreement or label sticker.
This product contains software owned by DM&P and licensed by third parties. Use of
such software is subject to the terms and conditions of license agreements enclosed
with this product. Software specifications are subject to change without notice and may
not necessarily be identical to current retail versions.
Updates and additions to software may require an additional charge. Subscription to
online service providers may require a fee and credit card information. Financial
services may require prior arrangements with participating financial institution.
Trademarks Acknowledgment
The DIN PC-333x Series is the registered trademarks of DMP Electronics Inc.
Microsoft, Windows, and AMI are registered trademarks of Microsoft Corporation
and American Megatrends Inc. in the United States and/ or other countries respectively.
Other brand names, product names or trade names appearing in this document are the
properties and registered trademarks of their respective owners. All names mentioned
herewith are served for identification purpose only.
Safety Information
WARNING








Do not expose the DIN PC to rain or moisture, in order to prevent shock and fire hazard.
Never install the DIN PC in wet locations.
Do not open the cabinet to avoid electrical shock. Refer to your nearest dealer for qualified
personnel servicing.
Never touch un-insulated terminals or wire unless power of the DIN PC and display monitor
are disconnected.
Locate the DIN PC as close as possible to the socket outline for easy access and to avoid
force caused by entangling of your arms with surrounding cables from the DIN PC.
When using the DIN PC, avoid using or installing the modem to the serial port
during a storm or a lightning.
Do not use the modem or a telephone to report a gas leak in the vicinity of the leak.
USB connectors are supplied with Limited Power Sources.
DO NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS
(ENCASING) OF THIS PRODUCT. PLEASE CONTACT YOUR NEAREST
DEALER FOR SERVICING FROM QUALIFIED TECHNICIAN.
Regulatory
FCC Class A Note
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference in which case the user will be required to correct the
interference at his own expense. Testing was done with shielded cables. Therefore, in order to comply
with the FCC regulations, you must use shielded cables with your installation.
WARNING
This product complies with EN55022 class A. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus as set out in the interference - causing equipment standard entitled “Digital Apparatus”,
ICES-003 of the Department of Communications.
Manufacturer’s Declaration of Conformity
This equipment has been tested and found to comply with the requirements of European Community
Council Directives 89/336/EEC and 73/23/EEC relating to electromagnetic compatibility and
product safety respectively.
Attention
This product has been designed and certified to comply with certain regulatory requirements pertaining
to Information Technology Equipment. This product has not been designed for use as a medical
device. Without limitation of the foregoing, it is not intended and has not been certified for use in a
hospital or clinical environment to diagnose, treat, or monitor patients under medical supervision, and is
not intended and has not been certified to make physical or electrical contact with patients, nor to
transfer energy to or from patients and/or to detect such energy transfer to or from patients.
Purchase Agreement
Purpose:
In accordance to the general commercial conduct of Trust and Fair Trade, herewith below is the
agreement for the protection for both parties, DMP and Users in pursuant of trading.
Product Description:
With this product, herewith also known as DIN PC-333x Series, which is a simplified & an economical
design of an embedded device for Special Purpose Personal Computing. The basic specification of
this product is comprised of the x86 technology design, and with onboard 1GB/ 2GB DDR2 System
memory, VGA display, USB, and LAN Interfaces.
Distribution Convention:
1.
This Product includes a gift box, an inner case, a PC, and a pluggable Terminal Block. Upon
receiving this product, kindly please refer to the User’ Manual to check for the contents and
appearance of this product; contact immediately your nearest dealer or DMP branch office if
any defective or missing parts found. The supplier will not be responsible for any reported
discrepancy there after the expiration period of 3-days from the received date.
2.
In consideration of transportation and the cost of storage, the supplier provides to the
distributors a warranty of 12-months. This warranty covers the failure caused by hardware
breakdown (excluding hard drives), but does not cover the act of misuse and mishandling.
3.
The supplier will not accept unknown post, therefore if you wish to repair or to return your
goods – kindly please contact your nearest dealer to make your declaration, and at the same
time, apply for an RMA number (RMA stands for Return Merchandise Authorization – please
ask for RMA form and fill-up for authorization).
4.
The freight for return goods for repair will follow the International customary practice and
convention: Both parties are to pay for freight of one shipment each. The shipper is required to
prepay the freight from the place of origin (This means that the returnee (user) covers the
freight for return goods, while the Supplier covers the freight for goods after the repair).
5.
Obsolete warranty is referred to as: (1) Expiration of warranty or (2) Damage due to misuse
within warranty. The Supplier will be taken into consideration of the circumstances, to provide
repair service with charges expense for obsolete warranty. This expense includes the cost of
material and the cost of labor.
Note: If there are other particular issues not listed in the above conditions, both parties agree to follow the
General Law of Commerce with fair and reasonable discussion in handling and resolving the argument.
Contents
Chapter 1
02 Unpacking Your DIN PC
Chapter 2
05 DIN PC-333x Series Overview
07 System Specifications
08 Peripherals Connecting
Chapter 3
10
11
13
14
BIOS Reconfiguring
Install the Driver
Additional Information
Linux Installation Guide
Chapter 4
23 Technical Specifications
Chapter 5
29 Onboard Connectors Summary
30 Pin Assignments
Chapter 6
33 Taking Care of Your DIN PC
35 Troubleshooting
Chapter 7
38
38
38
38
38
Terms and Condition
Warranty
Service and Support
Return Merchandise Authorization (RMA) Policy
Shipping Policy
Chapter
1
1
Unpacking Your DIN PC
Congratulation! You have just acquired DIN PC-333x Series device, please check the following items:
Packing List
Item No.
1
2
Q’ty
Description
DIN PC-333x Series DIN Rail Mountable PC
3-Pin Plug-In Type Vertical Terminal Block
1x
1x
Note: The accessories are subject to change without immediate notice.
Check Before Use
1. DIN PC-333x Series Unit
2. 3-Pin Terminal Block
2
Preface
DIN PC-333x Series: DIN Rail Mounted Mini PC
The DIN PC-333x Series is an innovative device that provides a perfect balance
between performance and energy efficiency. The DIN PC-333x is Fanless designed
with wide operating temperature range of up to 50°C, making it suitable in warehouse
and factory environments.
The DIN PC-333x Series features DMP ultra low power 933MHz Vortex86DX2 CPU,
Onboard 1GB/ 2GB DDR2 RAM, two independent Ethernet, and various I/O ports.
Supported operating systems such as Microsoft Windows Embedded and Linux OS,
users can integrate applications easily with a platform that provides versatile functions
to fulfill diverse requirements.
With compact dimensions of 152 x 104 x 54 mm (W x H x D), the DIN PC-333x Series
fits in small control boxes, as well as directly in a machine or the machine stand.
With DIN rail form factor, it supports DIN rail in top hat rail section EN 50022 version.
All DIN PC-333x Series’ interfaces are on the front side, so it can be cabled up easily.
The DIN PC-333x Series is an ideal choice as the front end embedded controllers for
industrial automation applications.
3
Chapter
2
4
DIN PC-333x Series Overview
Front Panel
K
A: COM1 Port
RS-232/ RS-422/ RS485 port
J
I
H
B: COM2 Port
RS-232/ RS-422/ RS485 port
G
D
B
E
C
F
C & D: COM5 & COM6 Port
RS-232 port x 2
E & F: GPIO P8 & P9
8-bit GPIO port x 2
Available in DIN PC-333x Series GPIO Version
A
E: RJ-45 LAN
10/100 Mbps
F: RJ-45 G LAN
1 Gbps
L
G: USB V2.0 Port x 2
For connection to devices with USB interface
(HDD, CD/ DVD-ROM, Memory Stick, etc.)
H: Terminal Block Header
3-Pin pluggable type 5.00 mm Pitch
I: VGA Port
Integrated Graphics Chip/ D-Sub 15-Pin
Rear Panel
J: DIN Rail Mounting Clip
5
Inside DIN PC-333x Series
N
M: SD Card Slot
This system is bootable from SD card
M
O
N: 7-Pin SATA DOM Socket
Reserved for SATA DOM
O: USB V2.0 Port
Reserve for WiFi Dongle
DIN Rail Information
DIN PC-333x Series supports DIN rail in top hat
rail section EN 50022 version. Please see
dimension (mm) in picture shown below:
6
System Specification
CPU
Dimension & Weight
Vortex86DX2 (933 MHz)
152 x 104 x 54 mm/ 760g
Main Memory
Operating System
1GB DDR2
Windows 7 Home/ Pro.
(32-bit DRAM bus, DIN PC-3330 Series)
Windows 7 Embedded
Windows XP Home/ Pro.
2GB DDR2
Windows XP Embedded
(32-bit DRAM bus, DIN PC-3332 Series)
Windows Embedded CE
※ For Windows 7 users, DIN PC-333x
Series supports 32-bit version only, 64-bit
version does not support
Supported Linux Distribution list
BIOS
AMI BIOS
Gentoo 4.2
Ubuntu 10.04
Debian 4.0
OpenSUSE 11.4
VGA
Fedora Core 5
Resolution up to 1920 x 1440 High Colors
Whattos Warp30 (Ubuntu 8.10 base)
On-Board SATA
SATA 2.0 connector x1 (Internal)
Peripheral
1.
2.
3.
USB V2.0 port x 3 (External x 2/ Internal x 1)
SD Card slot x 1 (Internal)
Serial port x 4 (available in RS-232/ RS-422/
RS-485/ GPIO port, configuration varies from
port to port, check DIN PC-333x Series spec
from page 24 to 27 for further details
7
Peripherals
Connecting the Power Adaptor
A
A: 3-Pin 5.00 mm Pitch Terminal Block
To use DIN PC-333x Series immediately, please
attach the Plug-In type Terminal Block with
power DC +8V ~ +15V
Note: DIN PC-333x Series supports Auto Power
On function, when power & switch on, the
system will be turned on automatically
Connecting the Monitor
B
B: VGA out Connection
Connect your LCD display Monitor with a VGA
cable (It is not included in DIN PC-333x Series
console bundles) to the 15-pin D-Sub VGA port
8
Chapter
3
9
BIOS Reconfiguring
1.
AMI BIOS is used in the DIN PC-333x Series. To reconfigure the DIN PC-333x Series,
press or hit the <Del> key to enter your BIOS setup main menu as below:
2.
3.
4.
5.
Select from the menu, the desired setup for change.
Press <Esc> to go back to main menu.
Press <F9> to load factory default setting.
Press <F10> to and select “Save Settings and Exit”, press “Y” to save the changes that
you just made. DIN PC-333x Series will restart accordingly to your new setup.
For Windows XP, Windows XP Embedded, and Windows Embedded CE OS platform,
please set ACPI Configuration to “No”.
6.
7.
Remark : If you used the SD card as main storage to boot Windows 7 OS or
Windows 7 Embedded OS, please set the BIOS as below:
1. IDE Operating mode => Legacy mode
2. Primary IDE Pin Select => SD Card
3. Standard IDE Compatible => Disabled
10
INSTALL THE DRIVER:
Under the Windows Series OS, the following drivers need to be installed manually:
1. VGA driver
2. Ethernet driver
3. Wireless USB WiFi Dongle driver (Optional)
Note:
Please find the mating drivers from EBOX support page
VGA DRIVER:
Unzip the downloaded file and double click the setting .exe file then “Next”as below to install:
After VGA driver installation completed, you will have to restart the computer. Then you will be able to
select the resolution up to 1920 x 1440 pixels.
11
ETHERNET DRIVER:
1.
2.
3.
4.
5.
Find the yellow question mark of Ethernet in the Device Manager under the control panel/ system.
On 1st question mark, select “Update Driver Software” and choose the right path, then click “Install
this driver software anyway” when Windows Security pops out. Select 1st question mark as 10/
100M LAN driver.
After installation completed, the Device Manager will update and show the correct device.
Following the procedure above, set 2nd question mark as 1G LAN driver.
Following the procedure above, set 3rd question mark as WiFi dongle (optional).
12
Additional information:
For Windows 7 OS or Windows 7 Embedded OS, the sleep function is hidden if you selected from
the start menu.
To customize the settings, first go to Start > Control Panel > Power Options, or simply search for
"Power Options" (without quotes). You will see a list of different power plans on your computer.
The plan currently in use has a blue dot in front of it. Click "Change Plan Settings" next to the power plan
currently in use. Click on the drop-down menu list, that is exactly next to "Put the Computer to sleep:".
From the options, you can set the amount of idle time before entering sleep mode.
13
Linux installation For Debian7.0/ Ubuntu10.04
Regarding the system installation of Debian7.0/Ubuntu10.04, please follow the steps
and suggestions to complete the system installation on the DIN PC-333x Series platform.
There we provided is a brief instruction to assist clients, but you can configure it by yourself
with system’s asking.
1. Configuration of BIOS

The first step is to ensure BIOS has correctly configured that necessary function was
enabled for IDE device. (for Debian7.0 especially)

Keep pressing the key <Del> can assist entering BIOS when the power turned on.
The BIOS functions you need to check locate Advanced \ IDE Configuration \
Standard IDE Compatible. Set as Enabled.
14
2. Basic system installation

For Debian7.0, after booting from the installation CD, moving straight to install
system would get a text only system, please choose Graphic Install if GUI is
necessary for your application.

The system would start to ask questions for basic configuration. Such as the
language, keyboard map and time zone, etc.

Then the system information appears for something about the detecting of network
hardware, system requires users to load the firmware files for network device rtl8168,
just answer no for this inquiry and move forward.

Then the system would inform you that multiple network interfaces were detected on
the DIN PC-333x Series, and the user to choose the one as primary network
interface, both of them all could be chosen. And the Ethernet cable must be plugged
in this period.
15

As installation processing, the system would need you to make decisions about how
the partitions your disk for the system? Following the default option is using entire
disk, for the beginner. Then choose the “all files in one partition. Other allocation is
also available, depends on customers’ needs.

In the final, remember to write the change to disk.

Then the system would keep asking you few questions for configuration,
suggestions were attached as follow.

When system asking you to choose the software to install for system, you can
remark both the Debian desktop environment and standard system utilities, then to
continue following procedure. It would start the package installation, around hundred
packages would be installed, please be patient until system informed you for
the next step.
16

The next question is about the agreement of the installation of the GRUB boot
loader to the MBR area? Answer YES and wait system to complete the installation
as last procedure.

When it's completed, the disc tray will eject and inform you, then press continue to
restart and be ready to enjoy the new system!
The Debian7.0
The Ubuntu10.04
17
3. Kernel and graphic driver installation
Install the Kernel Package (Console mode)

For Debian7.0, you can skip this procedure for kernel installation; Because system
could work with default kernel version (3.2.0).

Clicking the icon of the terminal from the application. And download the kernel
2.6.32-21 from below link then to store the kernel package.

Follow the instructions to complete the kernel installation, get into the folder that
kernel file stored, and switching as the root before command executed.
# dpkg -i linux-image-2.6.32-21-vortex86_2.6.32-21.32_i386.deb
Kernel Package (click 2.6.32-21-Vortex86)

When download completed, restart the system and to choose the kernel 2.6.34.10 to
boot when GRUB boot loader was loaded. You can keep pressing the key “Shift”
when the system from booting, then the boot loader would show the option of kernel
for you. Then find the “Ubuntu, With Linux 2.6.32-21-vortex86” to execute.
18

Or you can remove the default kernel 2.6.32-??-generic that be arranged as a higher
priority than the kernel we installed for the DIN PC-333x platform, with the instruction
below through the terminal.

First, check what version be installed as default in the system:
# grep –w linux-image-2.6.32 /var/log/dpkg.log

To find the last two numbers as location of question marks that the system shows on
screen “linux-image-2.6.32-??

Then execute it with the correct numbers that you found in previous, and to replace
the question mark with correct version numbers shown below.
# apt-get remove linux-image-2.6.32-??-generic

Then you would see only one kernel on the GRUB list.
19
Install the VGA driver (Console mode)

Switch to console mode by pressing key <Ctrl> + <Alt> + <F1>, then copy the VGA
driver rdc_drv.so to the driver folder /usr/lib/xor/modules/drivers/, before that, you
can download the driver from links below for Debian7 and Ubuntu10.04 individually.
The Ubuntu10.04 Xorg Version is 1.7.6
The Debian 7.0 Xorg Version is 1.12.4
VGA Driver (click M2012_R0.04 to download) for Ubuntu 10.04
VGA Driver (click M2012_T0.0.9.1 to download) for Debian 7.0

Follow instruction below to execute.
#/etc/init.d/gdm stop
#X –configure
#cp /root/xorg.conf.new /etc/X11/xorg.conf
#/etc/init.d/gdm restart
※Please click xorg.conf to download for your system, if the display is out of range.

Reboot and make sure all the display is normal then set the resolution as requested.
The supported resolutions:
1920x1200 (16:10)
1920x1080 (16:9)
1600x1200 (4:3)
1680x1050 (16:10)
1400x1050 (4:3)
1440x960 (3:2)
1400x960
1280x1024 (5:4)
1440x900 (16:10)
1280x960 (4:3)
1366x768 (16:9)
1360x768 (16:9)
1280x768 (16:10)
1280x720 (16:9)
1024x768 (4:3)
800x600 (4:3)
640x480 (4:3)
20
4. The system configuration
Enable the Auto login
System / Administration / Login Screen
Execute the utility “Login Screen” and enter the password to process it.
Set the Log in as “user account” automatically.
Disable the power saving mode when system idle,
System / Preference / Screensaver
Unmarked the option “Active the screensaver when computer is idle”.
Now, it is a workable Linux system for your DIN PC-333x Series.
21
Chapter
4
22
Technical Specification
DIN PC-3330 Series, 1GB RAM, RS-232
Model Type
Processor
BIOS
Memory
VGA
Ethernet
USB (2.0)
SD Slot
SATA
COM1
I/O
COM2
COM5
COM6
Auto Power On
Power
Dimensions
Weight
Operation Temp.
Certifications
Optional
D-3330-SS
D-3330-C1851
D-3330-C2
D-3330-C4
Vortex86DX2 (933MHz)
AMI BIOS
Onboard 1GB DDR2
Integrated Graphics Chip/ D-Sub 15-pin
10/100 Mbps LAN x 1, 1G LAN x 1 (RJ-45 connector, Built-in PXE diskless boot)
External: 2 ports, Internal: 1 port (space reserved dimension 33 x 20 mm)
1x (Internal)
1x
RS-232
RS-232
RS-232
RS-485
RS-232
RS-232
N/A
RS-232
N/A
N/A
RS-232
Yes
DC +8V ~ +15V (Pluggable Terminal Block 3-Pin 5.00 mm Pitch)
152 x 104 x 54 mm
760g
5 ~ 50 ℃
CE, FCC, VCCI, Vibration
1. Mic in/ Line out 2. TTL level RS-232 port
DIN PC-3330 Series, 1GB RAM, RS-485
Model Type
Processor
BIOS
Memory
VGA
Ethernet
USB (2.0)
SD Slot
SATA
COM1
I/O
COM2
COM5
COM6
Auto Power On
Power
Dimensions
Weight
Operation Temp.
Certifications
Optional
D-3330-851221
D-3330-851221C2
D-3330-852
D-3330-852C2
Vortex86DX2 (933MHz)
AMI BIOS
Onboard 1GB DDR2
Integrated Graphics Chip/ D-Sub 15-pin
10/100 Mbps LAN x 1, 1G LAN x 1 (RJ-45 connector, Built-in PXE diskless boot)
External: 2 ports, Internal: 1 port (space reserved dimension 33 x 20 mm)
1x (Internal)
1x
RS-485
RS-485
RS-485
RS-485
RS-422
RS-422
RS-485
RS-485
RS-232
RS-232
N/A
N/A
RS-232
RS-232
Yes
DC +8V ~ +15V (Pluggable Terminal Block 3-Pin 5.00 mm Pitch)
152 x 104 x 54 mm
760g
5 ~ 50 ℃
CE, FCC, VCCI, Vibration
1. Mic in/ Line out 2. TTL level RS-232 port
23
DIN PC-3330 Series, 1GB RAM, RS-422
Model Type
Processor
BIOS
Memory
VGA
Ethernet
USB (2.0)
SD Slot
SATA
COM1
I/O
COM2
COM5
COM6
Auto Power On
Power
Dimensions
Weight
Operation Temp.
Certifications
Optional
D-3330-221C1
D-3330-222
D-3330-222C2
Vortex86DX2 (933MHz)
AMI BIOS
Onboard 1GB DDR2
Integrated Graphics Chip/ D-Sub 15-pin
10/100 Mbps LAN x 1, 1G LAN x 1 (RJ-45 connector, Built-in PXE diskless boot)
External: 2 ports, Internal: 1 port (space reserved dimension 33 x 20 mm)
1x (Internal)
1x
RS-422
RS-422
RS-422
RS-232
RS-422
RS-422
RS-232
N/A
N/A
RS-232
Yes
DC +8V ~ +15V (Pluggable Terminal Block 3-Pin 5.00 mm Pitch)
152 x 104 x 54 mm
760g
5 ~ 50 ℃
CE, FCC, VCCI, Vibration
1. Mic in and Line out 2. TTL level RS-232 port
DIN PC-3330 Series, 1GB RAM, GPIO
Model Type
Processor
BIOS
Memory
VGA
Ethernet
USB (2.0)
SD Slot
SATA
COM1
I/O
COM2
GPIO P9
GPIO P8
Auto Power On
Power
Dimensions
Weight
Operation Temp.
Certifications
Optional
D-3330C2G2
D-3330852G2
D-3330D-3330D-3330D-3330222G2
851C1G2
221C1G2
851221G2
Vortex86DX2 (933MHz)
AMI BIOS
Onboard 1GB DDR2
Integrated Graphics Chip/ D-Sub 15-pin
10/100 Mbps LAN x 1, 1G LAN x 1 (RJ-45 connector, Built-in PXE diskless boot)
External: 2 ports, Internal: 1 port (space reserved dimension 33 x 20 mm)
1x (Internal)
1x
RS-232
RS-485
RS-422
RS-485
RS-422
RS-485
RS-232
RS-485
RS-422
RS-232
RS-232
RS-422
8-bit GPIO 8-bit GPIO
8-bit GPIO
8-bit GPIO
8-bit GPIO
8-bit GPIO
8-bit GPIO 8-bit GPIO
8-bit GPIO
8-bit GPIO
8-bit GPIO
8-bit GPIO
Yes
DC +8V ~ +15V (Pluggable Terminal Block 3-Pin 5.00 mm Pitch)
152 x 104 x 54 mm
760g
5 ~ 50 ℃
CE, FCC, VCCI, Vibration
1. Mic in and Line out 2. TTL level RS-232 port
24
DIN PC-3332 Series, 2GB RAM, RS-232
Model Type
Processor
BIOS
Memory
VGA
Ethernet
USB (2.0)
SD Slot
SATA
COM1
I/O
COM2
COM5
COM6
Auto Power On
Power
Dimensions
Weight
Operation Temp.
Certifications
Optional
D-3332-SS
D-3332-C1851
D-3332-C2
D-3332-C4
Vortex86DX2 (933MHz)
AMI BIOS
Onboard 2GB DDR2
Integrated Graphics Chip/ D-Sub 15-pin
10/100 Mbps LAN x 1, 1G LAN x 1 (RJ-45 connector, Built-in PXE diskless boot)
External: 2 ports, Internal: 1 port (space reserved dimension 33 x 20 mm)
1x (Internal)
1x
RS-232
RS-232
RS-232
RS-485
RS-232
RS-232
N/A
RS-232
N/A
N/A
RS-232
Yes
DC +8V ~ +15V (Pluggable Terminal Block 3-Pin 5.00 mm Pitch)
152 x 104 x 54 mm
760g
5 ~ 50 ℃
CE, FCC, VCCI, Vibration
1. Mic in/ Line out 2. TTL level RS-232 port
DIN PC-3332 Series, 2GB RAM, RS-485
Model Type
Processor
BIOS
Memory
VGA
Ethernet
USB (2.0)
SD Slot
SATA
COM1
I/O
COM2
COM5
COM6
Auto Power On
Power
Dimensions
Weight
Operation Temp.
Certifications
Optional
D-3332-851221
D-3332-851221C2
D-3332-852
D-3332-852C2
Vortex86DX2 (933MHz)
AMI BIOS
Onboard 2GB DDR2
Integrated Graphics Chip/ D-Sub 15-pin
10/100 Mbps LAN x 1, 1G LAN x 1 (RJ-45 connector, Built-in PXE diskless boot)
External: 2 ports, Internal: 1 port (space reserved dimension 33 x 20 mm)
1x (Internal)
1x
RS-485
RS-485
RS-485
RS-485
RS-422
RS-422
RS-485
RS-485
RS-232
RS-232
N/A
N/A
RS-232
RS-232
Yes
DC +8V ~ +15V (Pluggable Terminal Block 3-Pin 5.00 mm Pitch)
152 x 104 x 54 mm
760g
5 ~ 50 ℃
CE, FCC, VCCI, Vibration
1. Mic in/ Line out 2. TTL level RS-232 port
25
DIN PC-3332 Series, 2GB RAM, RS-422
Model Type
Processor
BIOS
Memory
VGA
Ethernet
USB (2.0)
SD Slot
SATA
COM1
I/O
COM2
COM5
COM6
Auto Power On
Power
Dimensions
Weight
Operation Temp.
Certifications
Optional
D-3332-221C1
D-3332-222
D-3332-222C2
Vortex86DX2 (933MHz)
AMI BIOS
Onboard 2GB DDR2
Integrated Graphics Chip/ D-Sub 15-pin
10/100 Mbps LAN x 1, 1G LAN x 1 (RJ-45 connector, Built-in PXE diskless boot)
External: 2 ports, Internal: 1 port (space reserved dimension 33 x 20 mm)
1x (Internal)
1x
RS-422
RS-422
RS-422
RS-232
RS-422
RS-422
RS-232
N/A
N/A
RS-232
Yes
DC +8V ~ +15V (Pluggable Terminal Block 3-Pin 5.00 mm Pitch)
152 x 104 x 54 mm
760g
5 ~ 50 ℃
CE, FCC, VCCI, Vibration
1. Mic in and Line out 2. TTL level RS-232 port
DIN PC-3332 Series, GPIO
Model Type
Processor
BIOS
Memory
VGA
Ethernet
USB (2.0)
SD Slot
SATA
COM1
I/O
COM2
GPIO P9
GPIO P8
Auto Power On
Power
Dimensions
Weight
Operation Temp.
Certifications
Optional
D-3332C2G2
D-3332852G2
D-3332D-3332D-3332D-3332222G2
851C1G2
221C1G2
851221G2
Vortex86DX2 (933MHz)
AMI BIOS
Onboard 2GB DDR2
Integrated Graphics Chip/ D-Sub 15-pin
10/100 Mbps LAN x 1, 1G LAN x 1 (RJ-45 connector, Built-in PXE diskless boot)
External: 2 ports, Internal: 1 port (space reserved dimension 33 x 20 mm)
1x (Internal)
1x
RS-232
RS-485
RS-422
RS-485
RS-422
RS-485
RS-232
RS-485
RS-422
RS-232
RS-232
RS-422
8-bit GPIO 8-bit GPIO
8-bit GPIO
8-bit GPIO
8-bit GPIO
8-bit GPIO
8-bit GPIO 8-bit GPIO
8-bit GPIO
8-bit GPIO
8-bit GPIO
8-bit GPIO
Yes
DC +8V ~ +15V (Pluggable Terminal Block 3-Pin 5.00 mm Pitch)
152 x 104 x 54 mm
760g
5 ~ 50 ℃
CE, FCC, VCCI, Vibration
1. Mic in and Line out 2. TTL level RS-232 port
26
DIN PC-3330 Series Listing:
D-3330-SS: Standard Version
D-3300-C1851: Standard Version with RS-232 port x 1 & RS-485 port x 1
D-3330-C2: Standard Version with RS-232 port x 2
D-3330-C4: Standard Version with RS-232 port x 4
D-3330-851221: Standard version with RS-485 port x 1 & RS-422 port x 1
D-3330-851221C2: Standard version with RS-485 port x 1, RS-422 port x 1 & RS-232 port x 2
D-3330-852: Standard version with RS-485 port x 2
D-3330-852C2: Standard version with RS-485 port x 2 & RS-232 port x 2
D-3330-221C1: Standard version with RS-422 port x 1 & RS-232 port x 1
D-3330-222: Standard version with RS-422 port x 2
D-3330-222C2: Standard version with RS-422 port x 2 & RS-232 port x 2
D-3330-C2G2: Standard Version with RS-232 port x 2 & 8-bit GPIO port x 2
D-3330-852G2: Standard Version with RS-485 port x 2 & 8-bit GPIO port x 2
D-3330-222G2: Standard Version with RS-422 port x 2 & 8-bit GPIO port x 2
D-3330-851C1G2: Standard Version with RS-485 port x 1, RS-232 port x 1 & 8-bit GPIO port x 2
D-3330-221C1G2: Standard Version with RS-422 port x 1, RS-232 port x 1 & 8-bit GPIO port x 2
D-3330-851221G2: Standard Version with RS-485 port x 1, RS-422 port x 1 & 8-bit GPIO port x 2
DIN PC-3332 Series Listing:
D-3332-SS: Standard Version
D-3332-C1851: Standard Version with RS-232 port x 1 & RS-485 port x 1
D-3332-C2: Standard Version with RS-232 port x 2
D-3332-C4: Standard Version with RS-232 port x 4
D-3332-851221: Standard version with RS-485 port x 1 & RS-422 port x 1
D-3332-851221C2: Standard version with RS-485 port x 1, RS-422 port x 1 & RS-232 port x 2
D-3332-852: Standard version with RS-485 port x 2
D-3332-852C2: Standard version with RS-485 port x 2 & RS-232 port x 2
D-3332-221C1: Standard version with RS-422 port x 1 & RS-232 port x 1
D-3332-222: Standard version with RS-422 port x 2
D-3332-222C2: Standard version with RS-422 port x 2 & RS-232 port x 2
D-3332-C2G2: Standard Version with RS-232 port x 2 & 8-bit GPIO port x 2
D-3332-852G2: Standard Version with RS-485 port x 2 & 8-bit GPIO port x 2
D-3332-222G2: Standard Version with RS-422 port x 2 & 8-bit GPIO port x 2
D-3332-851C1G2: Standard Version with RS-485 port x 1, RS-232 port x 1 & 8-bit GPIO port x 2
D-3332-221C1G2: Standard Version with RS-422 port x 1, RS-232 port x 1 & 8-bit GPIO port x 2
D-3332-851221G2: Standard Version with RS-485 port x 1, RS-422 port x 1 & 8-bit GPIO port x 2
27
Chapter
5
28
Onboard Connectors Summary
Summary Table for CPU Board
Nbr
Description
Type of Connections
Pin nbrs.
J2
SD Card Slot (Inside)
SD Card
9-pin
J3
SATA (Inside)
SATA Socket
7-pin
J5
USB3 (Inside)
USB Connector
4-pin
J6
USB1
USB Connector
4-pin
4-pin
J6
USB2
USB Connector
J7
GPIO P8
Box Header 5x2 2.0mm
9-pin
J8
VGA port
D-Sub Connector
15-pin
J9
GPIO P9
Box Header 5x2 2.0mm
9-pin
J10
Ethernet LAN
RJ-45
8-pin
J10
Ethernet LAN
G-LAN, RJ-45
8-pin
J11
COM1 Port
Box Header 5x2 2.0mm
9-pin
J11
COM2 Port
Box Header 5x2 2.0mm
9-pin
J13
COM5 Port
Box Header 5x2 2.0mm
9-pin
J13
COM6 Port
Box Header 5x2 2.0mm
9-pin
J15
Terminal Block
Terminal Block Socket
3-pin
 Front Connectors Outline
F
B
D
A
C
A: COM1 port
B: COM2 port
C: COM5/ GPIO P9
H
E
D: COM6/ GPIO P8
E: RJ-45 LAN, 10/100 Mbps
F: RJ-45 LAN, 1 Gbps
G
I
G: USB V2.0 x 2
H: VGA port
I : Terminal Block Header
29
Pin Assignment
J15: 3-Pin Terminal Block Header
Pin #
1
2
3
Signal Name
+8 ~ +15V
GND
FG
J5: USB V2.0 – 4-Pin USB Type Connector (Internal)
Pin #
1
2
3
4
5
6
Signal Name
VCC
USB2USB2+
GND
NC
NC
J8: VGA – 15pin D-Sub Connector
Pin #
1
2
3
4
5
Signal Name
MR
MG
MB
NC
GND
Pin #
6
7
8
9
10
Signal Name
GND
GND
GND
NC
GND
Pin #
11
12
13
14
15
Signal Name
NC
VCC
HYSYNC
VSYNC
VCC
J7 : GPIO P8 - 9pin D-Sub Connector (Available in GPIO version)
Pin #
1
3
5
7
9
Signal Name
PORT 80
PORT 81
GND
PORT 82
PORT 83
Pin #
2
4
6
8
--
Signal Name
PORT 84
PORT 85
PORT 86
PORT 87
--
J9 : GPIO P9 - 9pin D-Sub Connector (Available in GPIO version)
Pin #
1
3
5
7
9
Signal Name
PORT 90
PORT 91
GND
PORT 92
PORT 93
Pin #
2
4
6
8
--
Signal Name
PORT 94
PORT 95
PORT 96
PORT 97
--
30
J11 : COM 1 & COM 2 - 9pin D-Sub Connector (RS-232/ RS-422/ RS-485)
Pin #
1
3
5
7
9
Signal Name
DCD/ 422TX-/ RS485TXD/ 422RX+
GND
RTS
RI
Pin #
2
4
6
8
--
Signal Name
RXD/ 422TX+/ RS485+
DTR/ 422RXDSR
CTS
--
Pin #
2
4
6
8
--
Signal Name
RXD
DTR
DSR
CTS
--
J13 : COM 5 & COM 6 - 9pin D-Sub Connector (RS-232)
Pin #
1
3
5
7
9
Signal Name
DCD
TXD
GND
RTS
RI
J10: LAN: RJ-45 Connector (10/100 Mbps & 1G)
Pin #
1
3
5
7
Signal Name
FTXD+
FRXIN+
NC
NC
Pin #
2
4
6
8
Signal Name
FTXDNC
FRXINNC
31
Chapter
6
32
Taking Care of your DIN PC
This section gives you some guidelines on using DIN PC: Safe using, Storing and Handling.
Storing
Do not place DIN PC-333x Series in a location that is subject to:








Heating sources, such as stove, oven, heater, radiator or air duct
Direct contact from sunlight
Rain or moisture area
Excessive dust accumulation area
High humidity place
Constant or occasional mechanical movement, vibration or shock
Strong magnets or magnetic fields or magnetically unshielded speakers
Ambient temperature of more than 95oF (35oC) or less than 32oF (0oC)
Do not place other electronic/ electrical equipments near DIN PC-333x Series. The
electromagnetic field of DIN PC-333x Series may cause interference subjecting to malfunction.
Provide adequate air ventilation (circulation) to prevent internal buildup of heat. Leave a space of
at least 8 inches (20cm) behind the sides and back panel of the DIN PC-333x Series.
Change of environmental temperature: Problems may occur when there is a sudden change of
environmental temperature, or if the DIN PC-333x Series is brought directly from a cold location to
a warm one, moisture may condense inside DIN PC-333x Series. Turn off the device, and
contact your nearest dealer.
Check the surrounding appliance(s) before using DIN PC-333x Series. Since the DIN PC-333x
Series uses high-frequency radio signal and may interface with radio or TV reception causing
interference or poor signal display. When this happens, relocate the DIN PC-333x Series by a
suitable distance away from the set.
Do not drop the DIN PC-333x Series from the working table nor place heavy objects on top of it.
33
Using Cables for Connection
To avoid the problem, use only the specified interface cables in your accessory bag. The supplier
will not be responsible for the connection arising from the other unspecified peripheral equipment.
Do not use cut or damaged cables for connection.
Cleaning Your DIN PC
Clean DIN PC with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution.
Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzene, as
these may damage the finish of DIN PC.
When a solid object falls or a liquid spills onto the DIN PC, turn off the DIN PC immediately and
unplug the LAN and power cables. Contact a qualified person or your dealer to check the DIN PC
before you use it again.
Always disconnect the power cord from the power source before cleaning the DIN PC.
34
Troubleshooting
This section describes the techniques of resolving some basic problems that you encounter when
using DIN PC-333x Series. For more troubleshooting guidelines, please contact your nearest dealer
for technical support.
Troubleshooting Your DIN PC
A. DIN PC does not start
Make sure the DIN PC-333x Series is properly secured and plugged into a power source. Make
sure the power indicator shows the power is on. See section 2 for more information about “DIN
PC-333x Series Overview”.
Ensure that power connection of the DIN PC-333x Series to the external power source are
plugged in properly.
Check if your VGA or LCD monitor is properly plugged into a power source and turned on. Make
sure the brightness and contrast controls are adjusted correctly. See the manual that came with
your display (monitor) for details.
Test the outlet by connecting a different electronic device to the outlet.
Check if the DIN PC-333x Series does not function, by removing the power connection. Wait for
one minute, and then reattach the power connection.
Condensation may cause the DIN PC-333x Series to malfunction for a while. If this happens, do
not use the DIN PC-333x Series for at least one hour.
When you have checked all the above guidelines and the DIN PC-333x Series does not work.
Remove the power connection from the DIN PC-333x Series, and plug it in again. Then the
device should be powered on automatically.
B. BIOS Error Message –
BIOS error message appears when my DIN PC starts
If the BIOS error message appears, press any key to resume or, hit <DEL> to enter the BIOS setup
main menu, follow these steps:
1.
Press <DEL>, and the BIOS Setup main menu appears, check if HDD is detected. If it is not
detected, use Direction keys <↑↓> to choose “AUTO” and then go back to the main menu by
pressing <ESC>. Move your cursor down with Direction keys <↓>, and choose “Save
Settings and Exit”, a message dialog appears as seen below, hit <Enter>.
“Save current settings and exit (Y/N)? Y”
2.
Go to “Exit” menu using the Direction keys <↑↓> and choose the option “Load Optimal
Defaults”, then press <Enter>. A message dialog appears as seen below, hit “Y” key and
presses <Enter> to save and recover to the factory setting.
“Load Optimal Defaults (Y/N)? Y”
35
(BIOS Setup menu “Exit”)
C. “Operating System Not Found” –
A message indicating that “Operating system not found” appear
when the DIN PC starts (Windows won’t start)
Enter the BIOS setup main menu by pressing <DEL> key, be sure if correct boot drive is enabled.
If Windows still does not start, follow these steps to initialize the BIOS:
1. Turn off the DIN PC-333x Series.
2. Remove any peripheral devices connected to the DIN PC-333x Series.
3. Restart the DIN PC-333x Series.
4. Press <DEL> to enter BIOS Setup main menu window.
5. Follow the steps as written in item B. BIOS error message.
If you have just connected DIN PC-333x Series to a CD/ DVD or USB Drivers, remove these
peripherals. And restart to confirm that the Windows operating system starts properly. If DIN PC333x Series continues to display the message ”Operating system not found,” and Windows
does not start, please contact your nearest dealer for servicing.
36
Chapter
7
37
Terms and Conditions
Warranty
The warranty terms for DIN PC-333x Series are twelve (12) months from the shipped month. During the
warranty period, DMP Electronics will repair/ replace the product covered under this limited warranty.
Service and Support
DMP Electronics Inc. provides the technical support for hardware problems with your system
throughout the warranty period. The technical support service is limited to configuration and operation
of DIN PC-333x Series sold by DMP Electronics Inc. The technical support service does not offer
software tutoring or training.
Return Merchandise Authorization(RMA)policy
If the DMP staff or dealer determines that a part is defective. Purchaser must call our technical
support service to obtain an RMA number before attempting to return any part. Please refer to your
nearest dealer for :
To obtain an RMA number, Purchaser must follow procedures as below:
1. Complete the DMP Electronics Inc. standard RMA Form and fax back to the RMA Department.
2. The RMA Number must be used within 7 DAYS.
3. The RMA Number must be shown clearly on your shipping label.
4. DMP Electronics Inc. must receive all Returns before a replacement will be sent.
5. The repair cost depends on the parts, the damage reasons, and whether under warranty period, etc.
The Seller will charge the Purchaser in a reasonable price.
6. A copy of the invoice for the RMA product(s) will also be shipped to Purchaser.
7. The freight of return to DMP Electronics Inc. is charged to the Purchaser's account and
accompanied by an RMA number. Any Returns with freight collect will be refused and returned to
you. After Repairing, the cost of freight will be paid by Seller.
8. DMP Electronics Inc. must receive all returned goods within the warranty period.
Shipping Policy
The Purchaser must pre-pay shipping for any defective system or parts returned under the warranty.
DMP Electronics Inc. shall not be liable for risk of loss or damage during shipment of your returned
system or parts if you fail to insure the shipment.
All products must be shipped back to DMP Electronics Inc. in original or equivalent packaging. DMP
Electronics Inc. will ship the repaired or replacement product(s) to the Purchaser by freight prepaid.
Purchaser assumes the risk of loss. DMP Electronics Inc. shall not be responsible for failure of the
delivery service to make on-time delivery.
38
Download PDF