Samsung | MAX-VS530 | Instruction manual | Samsung MAX-VS530 Instruction manual

THREE-CD CHANGER
VIDEO-CD
MINI-COMPACT SYSTEM
MP3-CD/CD-R/RW PLAYBACK
MAX-VS530
Instruction Manual
Downloaded From Disc-Player.com Samsung Manuals
Safety Warnings
GB
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which can cause electric shock is present inside
this unit.
This symbol alerts you to important operating and maintenance instructions accompanying
the unit.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
Downloaded From Disc-Player.com Samsung Manuals
Thank you for buying this
SAMSUNG mini-compact system.
Please take time to read these instructions.
They will allow you to operate your
system with ease and take full advantage
of its features.
SAFETY WARNINGS .................................................................................................................................................................................... 2
INSTALLING YOUR MINI-COMPACT SYSTEM
Front Panel View ...................................................................................................................................................................................... 4
Remote Control ........................................................................................................................................................................................ 5
Rear Panel View ...................................................................................................................................................................................... 6
Where to Install Your Mini-Compact System............................................................................................................................................ 7
Connecting your System to the Power Supply ........................................................................................................................................ 7
Inserting Remote Control Batteries .......................................................................................................................................................... 7
Connecting to an External Source .......................................................................................................................................................... 8
Connecting the Loudspeakers ................................................................................................................................................................ 8
Connecting the AM (MW)/LW Aerial ........................................................................................................................................................ 9
Connecting the FM Aerial ........................................................................................................................................................................ 9
Connecting the SW Aerial(Option) .......................................................................................................................................................... 9
Connecting the equipment ...................................................................................................................................................................... 9
Demo/Dimmer function ............................................................................................................................................................................ 10
Setting the Clock ...................................................................................................................................................................................... 10
Contents
VCD/CD-PLAYER
Loading and Changing Compact Discs.................................................................................................................................................... 11
To replay the CD/MP3-CD........................................................................................................................................................................ 11
Selecting a CD in the Disc changer ........................................................................................................................................................ 12
MP3-CD Playback .................................................................................................................................................................................... 12
Selecting a Track...................................................................................................................................................................................... 13
Searching for a Specific Music Passage on a CD .................................................................................................................................. 13
Function to skip through 10 tracks at a time............................................................................................................................................ 13
Shuffle Play Function .............................................................................................................................................................................. 14
Repeating One or All Tracks on the Compact Discs................................................................................................................................ 14
Programming the Order of Playback........................................................................................................................................................ 15
Checking or Changing Programmed Tracks ............................................................................................................................................ 15
Video CD Player Playback ...................................................................................................................................................................... 16
Search Functions .................................................................................................................................................................................... 16
Time Search Functions .......................................................................................................................................................................... 16
When adjusting play speed .................................................................................................................................................................... 17
NTSC/PAL Selection Method .................................................................................................................................................................. 17
Sound Select Function ............................................................................................................................................................................ 17
KEY CONTROL Function ........................................................................................................................................................................ 17
VCD View Function .................................................................................................................................................................................. 18
ZOOM Function........................................................................................................................................................................................ 18
Last Memory Function ............................................................................................................................................................................ 18
TUNER
Searching for and Storing the Radio Stations ........................................................................................................................................ 19
Selecting a Stored Station........................................................................................................................................................................ 19
Improving Radio Reception...................................................................................................................................................................... 19
TAPE DECK
Listening to a Cassette ............................................................................................................................................................................ 20
CD Synchro Record Feature.................................................................................................................................................................... 20
Recording a Compact Disc ...................................................................................................................................................................... 20
Recording a Radio Programme................................................................................................................................................................ 21
Copying a Cassette (Dubbing) ................................................................................................................................................................ 21
Selecting the Cassette Playback Mode (Deck 2 Only) ............................................................................................................................ 21
OTHER FUNCTIONS
Timer Function ........................................................................................................................................................................................ 22
Cancelling the Timer ................................................................................................................................................................................ 22
Mute Function .......................................................................................................................................................................................... 23
Selecting an Equalizer Preset .................................................................................................................................................................. 23
How to adjust USER EQ? ........................................................................................................................................................................ 23
Power Sound Function ............................................................................................................................................................................ 23
Setting the System to Switch off Automatically ........................................................................................................................................ 24
Super Bass Sound .................................................................................................................................................................................. 24
Connecting Headphones.......................................................................................................................................................................... 24
Microphone Function................................................................................................................................................................................ 24
RECOMMENDATIONS FOR USE
Safety Precautions .................................................................................................................................................................................. 25
Cleaning Your Mini-Compact System ...................................................................................................................................................... 25
Precautions When Using Compact Discs ................................................................................................................................................ 26
Precautions When Using Audio Cassettes .............................................................................................................................................. 26
Before Contacting the After-Sales Service .............................................................................................................................................. 26
Technical Specifications .......................................................................................................................................................................... 27
Downloaded From Disc-Player.com Samsung Manuals
Symbols
GB
Front Panel View
GB
35 34
33
32
31
30 29
28
27
1
26
25
24
23
22
2
3
4
5
6
7
21
20
19
18
8
9
10
11
12
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Standby/On
Timer/Clock
Timer On/Off
AI Sleep
Headphone Jack Connector
Program button
MIC Level (option)
MIC Jack(option)
CD Repeat
Reverse Mode
Deck 1/2
Cassette Deck 1
Record/Pause
TAPE Normal Dubbing
CD Synchro Recording
Function Selection buttons
Cassette Deck 2
Skip Function buttons
Downloaded From Disc-Player.com Samsung Manuals
13 14 15
16
17
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
Super.Bass
Stop button
EQ Preset Classic
EQ Preset Rock
EQ Preset Pop
Enter
Search Function buttons
Volume
Power Sound
Compact Disc Compartment
CD Open/Close
Disc Change
Disc Selection buttons
Window Display
Memory Function
Mono/Stereo
Demo/Dimmer
Remote Control
GB
1
33
32
2
31
30
29
3
4
5
6
7
28
27
26
25
8
24
9
10
23
11
12
13
14
15
16
22
21
20
19
18
17
1. Standby/On
2. Digit Buttons/Direction Buttons
3. FM Mono/Stereo/ VCD Zoom
4. +10/0
5. Track Previous
6. VCD/CD Stop
7. CD Repeat
8. Radio Station Search
9. Volume Decrease
10. Deck 1/2
11. TAPE Rewind
12. TAPE Fast-Forward
13. AI Sleep
14. VCD/CD Shuffle Play/MP3-CD Random
Play
15. VCD Sound
16. VCD Slow Play
Downloaded From Disc-Player.com Samsung Manuals
17. Key Control
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
Key Control
Return
Time Search (Last Memory)
TAPE Stop
TAPE Play
Tuner/Band
Tuning Mode
Volume Increase
Disc Number Skip
Disc Play/Pause
Track Next
Disc View
Sound Mode
Super.Bass
Timer On/Off
Mute
Rear Panel View
GB
1
2
3
4
8
7
1. FM Aerial Connector Terminal
2. AM Aerial Connector Terminals
3. AUX-Input
4. Loudspeaker Connector Terminals
5. Voltage Selector(option)
6. SW Aerial Connector Terminal(option)
7. Audio (DISC) Output
8. Video (DISC) Output
Downloaded From Disc-Player.com Samsung Manuals
6
5
Where to Install Your
Mini-Compact System
Inserting Remote Control Batteries
GB
To take full advantage of your new mini-compact system, follow these
installation instructions before connecting the unit.
Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never place this unit in an outdoor area.
Maintain an open space of approximately 6 inches (15 cm) on the sides
and rear of the system, for ventilation purposes.
Make sure that you have enough room to open the compact disc compartment easily.
Place the loudspeakers at a reasonable distance on either side of the
system to ensure good stereo sound.
Direct the loudspeakers towards the listening area.
For optimum performance, make sure that both speakers are placed at
an equal distance above the floor.
Insert or replace remote control batteries when you:
Purchase the mini-compact system
Find that the remote control is no longer operating correctly
When replacing the batteries, use a new set of batteries and never
mix alkaline and manganese batteries.
1
Place your thumb on the position marked
on the battery
compartment cover (rear of the remote control) and push the cover in
the direction of the arrow.
2
Insert two AA, LR6 or equivalent batteries, taking care to respect the
polarities:
+ on the battery against + in the battery compartment
– on the battery against – in the battery compartment
3
Replace the cover by sliding it back until it clicks into position.
If you will not be using the remote control for a long time, remove the
batteries to prevent corrosion.
Connecting your System to the
Power Supply
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check the voltage.
1
Check the position of the voltage selector on the rear of the system
(OPTIONAL).
2
Plug the main lead (marked AC Cord on the rear of the system) into an
appropriate socket.
3
Press the Standby/On button to switch your mini-compact system on.
Downloaded From Disc-Player.com Samsung Manuals
Connecting to an External Source
Connecting the Loudspeakers
GB
The auxiliary input can be used to take advantage of the sound quality
of your mini-compact system when listening to other sources.
Examples: A television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect the external source, the source must have an audio output. In addition, you need an RCA connection cable.
1
Set the system to standby mode and disconnect it and the external
source from the main.
2
Connect the audio cable to the rear of the mini-compact system.
Connect the...
To the connector marked...
Red jack
White jack
R (right)
L (left)
The loudspeaker connector terminals are located on the rear of the
system.
1
2
3
Press and hold the terminal tab.
Insert the speaker cord.
Release the finger.
L
R
For optimum sound quality, do not invert the right and left
channels.
3
Plug the system back into the main socket and press Standby/On to
switch it on.
4
Select the AUX source by pressing AUX.
Result: AUX is displayed.
5
6
Switch the external source on.
Adjust the volume and balance as required:
Volume
Equalizer
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
3
4
Downloaded From Disc-Player.com Samsung Manuals
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of
light or with high humidity may cause performance degradation
of the speaker.
Do not install on the wall or on a high place of pole or other
unstable place to prevent any safety accident caused by falling
of the speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the
quality of the screen display.
Connecting the AM (MW)/LW Aerial
Connecting the SW Aerial (option)
GB
How to connect a WIRE TYPE aerial.
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The AM aerial connector terminals are located on the rear of the system
and are marked AM .
Spread the SW aerial out and attach the ends to a wall, in the position
providing the best reception.
If reception is poor (e.g. distance from transmitter too great, walls blocking
the radio waves, etc.), install an outdoor aerial.
To avoid noise interference, check that the loudspeaker wires do not
run close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
SW ANT.
Connecting to the Equipment
Using the Audio Cord, Connect the Audio Output Terminals (Left, Right)
of the System with the Audio Input Terminals (Left, Right) of the Video
Input Cassette Recorder, so as to Record VCD.
Using the Video Cord, Connect the Video Output Terminal of the system
with the Video Input Terminal of TV.
Turn on the TV and Select the Video mode by pressing the TV/VIDEO
SELECT button to the VIDEO Position.
Please Pay Attention not to Connect the Audio Output Terminals (left,
right) of the System with the Audio Input Terminal of TV.
Connecting the FM Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket
(75Ω) marked FM on the rear of the system.
Follow the instructions given on Page 19 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear
of the system using a 75Ω coaxial cable (not supplied).
TV
AMPLIFIER
VIDEO INPUT
AUDIO INPUT
R
Downloaded From Disc-Player.com Samsung Manuals
L
Demo/Dimmer Function
Setting the Clock
GB
All functions available on the system can be viewed on the
display and the display's brightness can be switched between
"on" and "off".
1
Your system is equipped with a clock which allows you to turn your
system on and off automatically. You should set the clock:
When you purchase the mini-compact system
After a power failure
After unplugging the unit
Press the Demo/Dimmer button.
Result: All functions available on the system appear on the front
panel display.
Remember to reset the time when the clock changes from
winter to summer time and vice verse.
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Each of these are explained in detail in this guide. Please refer to
the relevant section.
2
Press the Demo/Dimmer button again.
Result: The Dimmer function is selected and the display darkens.
Press the Demo/Dimmer button once again to brighten the front
panel display.
3
A display brightness control can only be performed while the
system power is on.
1
2
Switch the system on by pressing Standby/on.
Press Timer/Clock twice.
Result: CLOCK is displayed.
3
Press Enter.
Result: The hour flashes.
4
To...
Press the...
Increase the hours
Decrease the hours
5
When the correct hour is displayed, press Enter.
Result: The minutes flash.
6
To...
Press the...
Increase the minutes
Decrease the minutes
7
When the correct time is displayed, press Enter.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing Timer/Clock once.
1
2
3,5,7
4,6
Downloaded From Disc-Player.com Samsung Manuals
4,6
Loading and Changing Compact
Discs
To replay the CD/MP3-CD
GB
The CD disc changer can contain up to three 12 cm or 8 cm compact
discs without using an adapter.
Never force the compact disc carrousel when opening and
closing the compartment.
Do not use CDs of irregular shapes like heart or octagon shapes.
The performance of the player may be degraded.
Never press down or place objects on the carrousel.
At least more than one CD should be inserted for playbacks.
Always treat your compact discs with care; refer, if necessary, to the
section entitled “Precautions When Using Compact Discs” on page
26.
1
2
3
Switch the system on by pressing Standby/On.
Press the Open/Close( ) button on the front panel.
Result: The compartment opens.
1
2
3
4
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the compact disc has been correctly inserted in the
holder before closing the compartment.
4
If you wish to load a third compact disc, press the Disc Change
button on the front panel (or Disc Skip on the remote control).
Result: The carrousel rotates by 120°.
5
Close the compartment by pressing the Open/Close( ) button
again.
If you wish to start playing a disc directly, you can also proceed as follows.
To play...
Press...
Disc 1
VCD/CD (
) or Disc 1
Disc 2
Disc 2
Disc 3
Disc 3
Result: The compartment closes automatically and the disc selected
starts playing.
6
This is a player that enables the playback of audio CD, CD-R, CD-RW
and MP3-CD and does not possess the function that saves MP3 files.
5
6
Press the Standby/On button to switch on the power.
Press the VCD/CD(
) of the main unit to select the CD function.
Insert more than one CD or a MP3-CD.
Press the VCD/CD(
the remote control.
) button of the main unit or the
If there is more than one CD or an MP3-CD inserted,
replays are then processed in order.
Your CD Player will take a few moments to scan through all
the tracks recorded on a particular MP3-CD.
The English name of the song may be indicated on the display only
if directly downloaded from the PC or if the purchased MP3-CD is
sorted according to titles(directory). (Other
languages besides English may not be indicated.)
The English name of the track may not be indicated
depending on the characteristics of the MP3-CD.
Adjust the volume according to needs with the following procedures.
Turn the Volume control of the main unit.
or
Press the VOL. + or – button of the remote control.
If it is desired to stop while the playback is processing, press the
VCD/CD(
) button.
Press the VCD/CD(
7
button of
To stop playback, press the
) button once again to playback again.
button.
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using it,
to prevent dust from entering.
You can load or unload compact discs when the radio, tape
or auxiliary source function is selected.
The function will be automatically entered VCD/CD from
the other source when you press CD Open/Close button.
A new disc may be inserted in the remaining two compartments
excluding the CD which is being played back. Press the Disc
Changer button to open the CD tray. The revolving part does not
turn during playbacks.
If there is not even one CD inserted in the CD tray, it is
indicated as “NO DISC”.
If the CD Repeat function is not selected, 3 CDs are played back
which automatically stops.
2,5
5
4
5
1
2,4,6
1
5
Downloaded From Disc-Player.com Samsung Manuals
7
Selecting a CD in the Disc changer
MP3-CD Playback
GB
The CD function is automatically selected when Disc Skip is pushed.
HOW TO PLAYBACK MP3-CD directly
To select a specific disc, press the corresponding Disc (1, 2, 3) button on
the front panel or Disc Skip on the remote control, until the required disc
indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
1
After inserting MP3-CD in the Set, Press the select button or Number button after Reading.
2
You can see the information of Disc on the TV.
If you wish to play the current disc only, press CD Repeat on the
front panel one or more times, until 1 CD is displayed.
MP3
If you use the Disc (1, 2, 3) function when listening to the radio or
to a tape, the system switches automatically to the
CD mode.
If the disc selected is not loaded, the next disc is played
automatically.
TOTAL: 150
PAGE 003/030
TR :
017
016
PBAY
0 : 02 : 39
I
017
DON’T FOR
I
:
Song name
Track No
I : MP3 File display
7 tracks on the PAL TV screen every time;
5 tracks on the NTSC TV screen every time.
Select the No of song on the remote control Digits button
and you can enjoy the Music.
HOW TO PLAYBACK MP3-CD on MENU MODE
What is MP3?
MP3 means MPEG1 Layer 3, the global standard for audio
signal compression technology. It uses digital compression technology to compress original sound data by up to 12 times without
sound quality degradation.
1
2
After inserting MP3-CD in the Set, Press the “DISC
VIEW”button.
You can see the following information of Disc
on the TV.
MP3
File Compatibility
The unit will playback files created in MP3 format
(Mpeg1.Layer3) with *.mp3 as their extension.
Files created in MP2 format (Mpeg1.Layer2) with *.mp2 as
their extension can also be played back.
TOTAL: 150
PAGE 001/003
TR :
000
1
DIRECTORY NAME
2
ABC
3
KBG
4
CDEG123
Directory name
Directory No
How many MP3 files can a CD-R or CD-RW disc record?
The maximum capacity of one CD-R or CD-RW disc is
680MB.
Normally, one MP3 file has a capacity of 4MB, therefore
approximately 170 files can be recorded on a single disc.
0 : 00 : 00
Select the Number of Directory.
You can see the following Display.
MP3
TOTAL: 150
PAGE 001 / 004
TR :
000
0 : 00 : 00
DIRECTORY NAME
Regarding the playback of CD-R/RW
In the case of an original CD-R(Recordable) recorded in
audio CD format, CD-RW(Rewritable) and editing by the
user, playback is processed on the respective
completed status. (The player may not be played back
according to the characteristics of the CD or recorded status.)
The CD-RW is comparably less reflexive than CD which
causes more time delay to read.
Downloaded From Disc-Player.com Samsung Manuals
1
DIRECTORY NAME
I
2
ABC
I
3
KBG
I
4
CDEG123
I
Select the No of song on the remote control Digits
button and you can enjoy the Music.
Searching for a Specific Music
Passage on a CD
Selecting a Track
GB
You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
To start playback at the beginning of the...
Press the
and
...
When listening to a compact disc, you can quickly search for a specific music passage on a track.
It is recommended that you turn the volume down before using this
function.
Next track
Press
once
To search through the tracks...
Current track
Press
once
Previous track
Press
Forwards
Backwards
Track of your choice
twice
The appropriate number of
pressing the
and
You can also press and hold down
search through the tracks.
Press and hold down...
for at least one second
for at least one second
/
on the front panel to auto
Function to skip through 10
tracks at a time
Press the +10/0 button briefly while playing back a
CD and VCD. The track 10 tracks after the current one will then
be played back.
Example: If you want to select track 43 during playback of track 15,
press the +10/0 button four times, and then press the
button three times or Digit 3 button once.
15 ➝ 10 ➝ 20 ➝ 30 ➝ 40 ➝ 41 ➝ 42 ➝ 43
In selecting a track on MP3-CD, digit “0” will be entered if the button
of +10/0 is pressed.
Example: If you want to select a track 40 during the
playback of a certain track, press both buttons of 4
and +10/0.
Downloaded From Disc-Player.com Samsung Manuals
Repeating One or All Tracks
on the Compact Discs
Shuffle Play Function
GB
You can listen to the tracks on a compact disc in a different order
each time, as the various tracks will be selected
automatically in a random sequence.
1
Press the Shuffle button.
Result: The SHUFFLE(VCD/CD) or RANDOM(MP3-CD) indication appears and all
the tracks are played in a random order. Both the track number and the
playing time are displayed.
If this button is pressed when the CD is being played back or stopped,
any track recorded in the CD may be selected to playback again.
The CD plays back without repetitions and in the case of the MP3-CD,
a track once played back may also be played back again repeatedly.
You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
All discs loaded in the carrousel
1
2
To repeat...
Press CD Repeat on the Front
Panel one or more times until...
The current track indefinitely
The selected disc
All discs loaded
REPEAT 1 is displayed
REPEAT 1 CD is displayed
REPEAT ALL CD is displayed
When you wish to stop the Repeat function, press CD Repeat until ALL
CD or 1 CD is displayed, or press
2
When playing tracks in a random order, you can:
Move on to the next track (selected at random) by pressing
/
Search quickly for a specific point in the current track by pressing
/
3
When you have finished the random playback, press
Shuffle button again.
.
or press the
The Repeat and CD Synchro function is not supported from the
Shuffle playback mode.
Playback of video CD Version 2.0
– When pressing the Shuffle button during the playback,
the operation will stop.
– When pressing the Shuffle button during the stop, the playback will
operate with reading the video CD Version 2.0 as a Version 1.1.
1,2
2
3
2
1,3
Downloaded From Disc-Player.com Samsung Manuals
2
Checking or Changing Programmed
Tracks
Programming the Order of Playback
GB
You can decide:
You can check or change your selection of tracks at any time.
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
A maximum of up to 30 order of tracks desired to listen may be programmed.
Before selecting the track, the VCD player should be stopped.
This function may be used simultaneously with the CD Repeat function.
1
2
3
If the CD function is selected, stop the player by pressing
1
2
.
If you have already programmed 30 tracks, C is displayed
instead of P when you press Program.
Press Program.
Result: The following indications are displayed:
If necessary, select the disc containing the required track by pressing
the corresponding Disc (1, 2, 3) button.
5
Select the required track by pressing the
and
Press
to move back through the tracks
Press
to move forward through the tracks
10
button:
Press Program to confirm your selection.
Result: The selection is stored and
9
Press Program.
Result: The following indications are displayed:
Load the selected CDs.
4
7
8
3
Press Program again.
Result: The first track selected is displayed, together with the letter C (Change).
4
5
6
7
8
Press Program one or more times until the track to be changed is displayed.
If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
Press
and
to select a different track.
Press Program to confirm your change.
Press VCD/CD ( ) to start listening to the selection.
Result: The first track selected is played.
is displayed.
When selecting the tracks of numbers larger than 3 digit figures (figures
from the number 100), please use the Digit buttons.
To select other tracks, repeat Steps 4 to 6.
Press VCD/CD (
grammed.
once if you have started listening to the selection.
(C = Check, 01=Program No, DI = Disc No, – – – = Track No on the disc)
(01 = Programme No, DI = Disc No, – – = Track No on the disc)
6
Press
) to listen to the track selection in the order pro-
5
To...
Press the
and
...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards one
or more tracks
Press
once
Press
twice
Press
once
The appropriate number of
pressing the
and
To cancel the selection, press
.
Once if the compact disc player is stopped
Result: PRGM is no longer displayed.
8
2,3,4,7
1
6
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a track
which does not exist on the CD, the selection skips to the next
programmed track.
6
4
6
8
1,10
3,6
Downloaded From Disc-Player.com Samsung Manuals
5,9
5,9
1
8
6
Video CD Player Playback
Search Functions
GB
In order to playback video VIDEO-CD(‘S), make sure that your unit is
connected to your TV set.
This unit is designed for playback of video CD(‘S), version 1.1 and 2.0.
Only with version 2.0, is it possible to call up the on screen menu function.
This unit will not play back any other video VIDEO-CD(‘S) other than 1.1
and 2.0 versions.
1
2
3
4
5
You can find a certain passage faster during playback.
This function is possible in CD or VCD Ver 1.1 or Ver 2.0 menu off
mode.
1
Press and hold down...
Scan forwards
Scan backwards
2
Turn on the Standby/On switch and set the VCD mode.
To...
Release the Skip/Search buttons when the desired passage has
been found.
Press the Open/Close ( ) button on the unit, to open the CD tray.
Result: “OPEN” is displayed and CD tray slides open.
In the video CD version 1.1, where the disc’s contents are over 15
minutes long, you can scan up or down by intervals of five minutes.
Load a video-CD(’S) with the label facing upwards in the tray.
Press the Open/Close (
) button again to close the CD tray.
To playback:
3
Result: The picture is still, and the disc’s contents are forwarded or
reversed by 5 minute intervals. Playback then resumes from
this new position.
are displayed on the TV screen. Press the
button and the
menu is displayed on the TV screen.
Select a number from the menu using Digits button on the remote
control and press the VCD/CD(
) button.
To return to the previous menu, press the Return button on the
remote control or the Enter button on the front panel .
When playing a video-CD(‘S) version 2.0, reading time on the
display may take longer, depending on the disc’s contents.
Press
button on the remote control to receive a still picture.
Result: Pause is displayed, a still picture appears and the sound is
muted.
7
8
To return to normal playback, press VCD/CD(
Press the Stop (
Press...
Scan forwards by 5 minute intervals
Scan backwards by 5 minute intervals
In version 1.1, press the
button for direct access to the film,
as there is no menu-on-screen.
In version 2.0, load a video CD, “Video CD2.0”, and “MENU ON”
6
To...
In the SKIP/SEARCH or SCAN mode, the sound can only be partially
heard and the picture scenes will change sporadically, until the required
passage has been found.
) button.
) button to stop playback.
Please make sure that the VIDEO-CD(‘S) to be played is not
flawed optically, as this may cause a distorted sound or the unit to
malfunction.
2,4
Time Search Function
(This function is available only during the playback of a CD/VCD)
Please use this function for reproducing a desired track in a certain
time of playback.
1
2
3
Press the Time Search button.
Set a desired time by pressing the Digit buttons.
Press the Play (
) button.
1
2
8
5,6,7
Downloaded From Disc-Player.com Samsung Manuals
3
1
When adjusting play speed
Sound Select Function
GB
Turn on the TV and set video mode.
Press the Slow button on the remote controller when the play function is on.
Voices do not come out when the Slow button is pressed.
Slow playing is 1/2, 1/4, 1/8 the normal playing speed.
With this function, you can playback video CD’s that provide 2-channel tone(bilingual) in the original language. Similarly, with karaoke
video CD’s, you can select between the channel for music without
vocals for sing-along purpose, or the channel complete with music
and vocals.
During playback, press the Sound button on the remote control.
Result: Each time the Sound button is pressed, the following appears in
the display and on the TV screen:
To return to normal operation.
Press the VCD/CD (
) button.
When the slow mode or frame mode is selected a disc will only forward
operation.
Lch MONO
( L-CH )
Rch MONO
( R-CH )
STEREO
Lch MONO : Only the left channel (instrumental parts) is played back
through both the right and left speakers.
Rch MONO : Only the right channel (vocal parts) is played back
through both the right and left speakers.
STEREO : Cancels the Multiplex Sound (normal stereo playback
resumes).
You can select between listening to the tone from the left channel,
the right channel or both channels.
KEY CONTROL Function
NTSC/PAL Selection Method
According to a DISC or TV, Press the REC/Pause button on the front
panel.
Set the system to standby(power off) mode, press the REC/Pause button
on the front panel.
Result: Each time the REC/Pause button is pressed, the following appears
in the display:
NTSC
Downloaded From Disc-Player.com Samsung Manuals
PAL
This function can work only at VCD mode when microphone is connected.
Press the Key Control button to adjust the key to your voice. (the 15 step
key control you can select )
Result: Each time the Key Control #, b button is pressed, the following
appears on the TV screen:
b : Low-Pitched Key
# : High-Pitched Key
Key control function and VCD slow playing function do not work at
the same time .
ZOOM Function
VCD VIEW function
GB
This function can be used conveniently to search a desired track in a VCD.
function is possible in VCD Ver 1.1 and Ver 2.0 menu off mode.
This
1
Press Zoom button during playback.
Result: The picture being reproduced will be enlarged twice as large
as the previous one.
2
Press Zoom button once more in the state of double sized zoom.
Result: The picture being reproduced is enlarged four times as large
as the initial one.
3
Press Zoom button in the state of four times sized zoom.
Result: The picture will return to the initial size.
When you want to select a track
1
Press the Disc View button in the stop state.
Result: "TRACK VIEW" menu is displayed on the screen.
The screen is split into 9 with each screen picture being
reproduced for 4 seconds.
– Press NEXT(
) button to see the rest tracks.
– Press PREV.(
) button to see the previous tracks.
2
3
Select a track by pressing the Digits buttons.
Press the VCD/CD (
) button.
Result: The picture that you selected is displayed in full screen.
4
When you wish to stop the DISC VIEW function, press the
During operating the zoom function, if you want to move the
picture upward/downward/leftward/rightward, please press the
respective Digits button (2,4,6,8).
button.
When using more than 10 tracks :
Press the Digits and +10/0 button, select the desired track
number(Reference page 13).
– Press NEXT(
) button to see the next track.
– Press PREV.(
) button to see the previous track.
2
1,4
1
TRACK VIEW
4
3
1,4
1
2
3
4
5
6
7
8
9
1,2,3
When you want to select an INDEX
This function is convenient to search a desired scene as it
displays a track reproduced by time.
1
2
3
Reproduce the pictures by pressing (
Last Memory Function
) button.
Press the Disc View button.
Result: "INDEX VIEW" menu is displayed on the screen.
The screen is split into 9 with each screen picture being
reproduced for 4 seconds.
Reproduce the pictures by pressing a desired Digits button.
Result: The one of nine picture is displayed in full screen.
INDEX VIEW
3
2
1
Downloaded From Disc-Player.com Samsung Manuals
1
2
3
4
5
6
7
8
9
When CD playback is selected again after your CD player has
been stopped or turned off, this function allows playback from the
start of the track that you last listened to.
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
1
2
3
4
5
or
15 FM stations
15 AM stations(or 8MW,7LW Station)
1
6
2,3
4
4
7
Switch the system on by pressing Standby/on.
Select the TUNER function by pressing TUNER .
Select the required frequency band by pressing TUNER (Band) again
on the front panel or TUNER (Band) on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
LW(Option)
Long Wave
SW1(Option)
Short Wave
SW2(Option)
Short Wave
Tune in to the desired station.
Manual tuning
Press the Tuning Mode button so that the "MANUAL" indicator
lights up on the front panel display.
Press
/
on the main unit to tune in to the desired station
manually.
or
Press Tuning
or
on the remote control to do the same.
Automatic tuning
Press and hold
/
on the main unit for more than 1 second so
that the "AUTO" indicator lights up on the front panel display.
Press and briefly hold
/
on the main unit to begin automatic
tuning.
or
Press and briefly hold Tuning
or
on the remote control to do
the same.
7
7
Selecting a Stored Station
You can listen to a stored radio station as follows:
1
2
3
Switch the system on by pressing Standby/On.
Select the TUNER function by pressing TUNER .
Select the required frequency band by pressing TUNER (Band) on the
remote control or TUNER (Band) again on the front panel.
4
Press
button on the front panel of the unit, or the Tuning
/
Mode button on the remote control until “PRESET” is displayed.
5
Press
to select the desired station.
/
or
Select the desired station by pressing the station number stored, using
the Tuning
or
button on the remote control.
Result: The desired station is now received.
1
Use the manual tuning method if the automatic tuning search does
not stop at the desired station because the signal is weak.
For details on the Preset function, see the “Selecting a Stored
Station” on page 19.
5
6
7
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
5
5
2,3
Select the FM stereo or mono mode by pressing Mono/ST.
If you do not want to store the radio station found, revert to Step 4 and
search for another station.
Otherwise:
a Press Memory.
Result: The PRGM is displayed for a few seconds.
b Press Tuning Down and Up to assign a programme number
between 1 and 15.
c Press Memory to store the radio station.
Result: PRGM is no longer displayed and the station is stored.
8
4
To store any other radio frequencies required, repeat Steps 3 to 7.
The PROGRAM function can be used to assign a new station to an
existing programme number.
4
Downloaded From Disc-Player.com Samsung Manuals
4
4
Improving Radio Reception
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them permanently
If reception from a specific FM radio station is poor, press Mono/ST. on
the remote control to switch from stereo mode to mono.
The quality of the sound will be improved.
GB
CD Synchro Record Feature
Listening to a Cassette
GB
Always treat your cassettes with care; refer, if necessary, to
the section entitled “Precautions When Using Audio Cassettes”
on page 26.
1
2
3
Switch the system on by pressing the Standby/On button.
4
Insert the pre-recorded cassette with the open edge of the tape
facing downward.
5
Select the TAPE function by pressing TAPE.
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where Push Eject ( ) is written.
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter number.
You can record a compact disc on a cassette in two different ways:
Synchronised recording
Direct recording
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
2
3
4
5
6
7
If you insert a cassette in both decks, the system selects the
deck in which you inserted the second cassette.
6
If you have inserted two cassettes, press Deck 1/2 on the front panel
or directly the Deck 1/2 button on the remote control to select the
cassette to be played.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2
indication is displayed.
7
To listen to...
Press ...
Side A
TAPE (
) once
Side B
TAPE (
) twice
Result: The cassette starts playing.
Switch the system on by pressing Standby/On.
Insert a blank cassette in Deck 2.
Select the CD function by pressing VCD/CD on the front panel.
Load a compact disc.
Select the required disc.
Select the required track and press CD Synchro or press CD
Synchro directly to start recording at the beginning of the disc.
Result: “REC” and “CD-SYNC” are displayed and recording starts.
To stop...
Recording and playing the compact disc
Press ...
1
3
DECK 1 and DECK 2
DECK 2 Only
7
6
When the cassette is stopped, select one of the following functions
as required.
8
9
To...
Rewind the cassette
Press ...
Fast-forward the cassette
When you have finished the function, press TAPE
control or
on the front panel to stop.
1
8
8
on the remote
Recording a Compact Disc
The direct recording mode enables you to start recording with
any track on the compact disc.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
1
2
3
4
5
6
Switch your system on by pressing Standby/On.
7
Press the REC/Pause.
Result: REC is displayed .
8
Press the
to start playing the track.
Result: The track is recorded on the cassette.
9
When you have finished recording, press TAPE
control or
on the front panel to stop recording.
2,7
6
9
Insert a blank cassette in Deck 2.
Select the CD function by pressing VCD/CD on the front panel.
Load the compact disc.
Select the required disc.
Select the required track on the compact disc and press
on the front
panel or
on the remote control to set the compact disc player to Pause
mode.
1
3,6,8
Downloaded From Disc-Player.com Samsung Manuals
7
9
on the remote
Recording a Radio Programme
GB
You can record a radio programme of your choice.
You can only record on cassettes in Deck 2.
1
You do not need to adjust the volume, as it has no effect on
the recording.
1
2
3
4
Switch the system on by pressing Standby/On.
Insert a blank cassette in Deck 2.
5
Select the TUNER function by pressing TUNER .
Select the radio station that you wish to record by pressing Tuning
4
or
on the remote control or by press the Tuning Down or
Up on the front panel.
5
6
Press REC/Pause.
Result: REC is displayed in red and recording starts.
When you have finished recording, press the TAPE
on the
remote control or
on the front panel to stop recording.
Selecting the Cassette Playback
Mode (Deck 2 Only)
Your mini-compact system has three cassette playback modes
which enable you to listen to both sides of a cassette automatically.
Press REV. Mode until the appropriate symbol is displayed.
1
When the display indicates... The mini-compact system plays back...
3
One side of the selected cassette and
then stops.
6
One side of the cassette.
The other side of the cassette and then
stops.
5
Both sides of the cassette indefinitely
4
4
Copying a Cassette (Dubbing)
You can copy a cassette from Deck 1 to Deck 2. Two options
are available:
You do not need to adjust the volume, as it has no effect on the
recording.
Take care not to insert the tape to be copied in Deck 2, as it will
be erased when you start recording.
1
2
3
4
Switch your system on by pressing Standby/On.
Insert a blank cassette in Deck 2.
Insert the tape to be copied in Deck 1.
To copy a cassette at...
Press...
Normal speed dubbing
Dubbing
Result: The appropriate indications are displayed and the cassette in
Deck 1 is copied to the cassette in Deck 2.
5
Press
on the front panel or TAPE
you have finished recording.
Downloaded From Disc-Player.com Samsung Manuals
on the remote control when
until you press stop.
Timer Function
GB
If the timer switch on and off times are identical, the word ERROR is
displayed.
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
2
3
4
5
1,9
3,4,5,6,7,8
Switch the system on by pressing Standby/On.
TIMER is displayed.
Press Timer/Clock until
Press Enter.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
4,5,6,7
4,5,6,7
Set the timer switch-on time.
a
Set the hour by pressing the
b
Press Enter.
Result: The minutes flash.
c
Set the minutes by pressing the
d
Press Enter.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
buttons.
/
Cancelling the Timer
buttons.
/
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
Set the timer switch-off time.
a
b
Set the hour by pressing the
buttons.
/
Press Enter.
Result: The minutes flash.
c
Set the minutes by pressing the
d
Press Enter.
Result: VOL XX is displayed, where XX corresponds to the volume already set.
/
buttons.
6
Press Tuning Down and Up to adjust the volume level and press
Enter.
Result: The source to be selected is displayed.
7
pressing the
/
buttons to select the source to be played
when the system switches on .
If you select...
You must also...
TAPE (cassette)
Insert a recorded cassette in one of the
decks before setting the system to standby.
TUNER (radio)
a Press Enter.
b Select a preset station by pressing the
/
buttons.
VCD/CD (compact disc)
8
9
2
a Load one or more compact discs.
b Select the required disc.
Press Enter to confirm the timer.
Press Standby/On to set the system to standby mode.
Result:
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off automatically at the required times.
Downloaded From Disc-Player.com Samsung Manuals
To...
Press Timer On/Off...
Cancel the timer
Once.
Result:
is no longer displayed.
Restart the timer
Twice.
Result:
is displayed again.
How to adjust USER EQ?(option)
Mute Function
You can turn the sound off temporarily on your system.
Example: You wish to answer a telephone call.
1
2
Press Mute.
To switch the sound back on (at the same volume as before), press
Mute again or the Volume buttons.
You can freely set the desired tone (BASE/TREBLE) by
using the USER EQ function.
1
Press the Sound Mode button longer.
Result: "USER EQ" flashes on the display for 5 seconds.
2
Press the Tuning Mode button.
Result: TREBLE level appears on the display.
(Factory-set TREBLE level is "HIGH 0 dB".)
3
Press Tuning
,
to adjust the TREBLE level (-6 to +6).
* TREBLE level can be adjusted at a 2 dB increment.
4
Press the Tuning Mode button to complete the setting.
This function is available only on the remote control.
1
2,4
3
3
Selecting an Equalizer Preset
Power Sound Function
Your mini-compact system is equipped with a preset equalizer
that allows you to choose the most appropriate balance
between treble and bass frequencies, according to the type of
music you are listening to.
Press EQ on the front panel until the required option is selected.
To obtain a...
Select...
Normal balance (linear)
Balance suitable for pop music
Balance suitable for rock music
Balance suitable for classic music
PASS
POP
ROCK
CLASSIC
Your mini-compact system is equipped with the function
of Power Sound .
The function of Power Sound amplifies bass and improves
high key or bass twice as much for you to appreciate
powerful real sound.
To select P.SOUND
Press P.SOUND button on the front panel, “P,SOUND” is
displayed.
To cancel this function, press P.SOUND button again and
“OFF” is displayed for a few seconds.
Downloaded From Disc-Player.com Samsung Manuals
GB
Setting the System to Switch off
Automatically
Connecting Headphones
GB
While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example: You wish to go to sleep to music.
You can connect a set of headphones to your mini-compact
system so that you can listen to music or radio programmers
without disturbing other people in the room. The earphones
must have a 3.5 mm jack or an appropriate adapter.
1
Connect the headphones to the Phones jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
Press AI Sleep.
Result: playback starts and the following indications are displayed:
Prolonged use of headphones at a high volume may damage
your hearing.
90 MIN
2
Press AI Sleep one or more times to indicate how long the system
should continue playing before it switches off:
At any time, you can:
Check the remaining time by pressing AI Sleep
Change the remaining time by repeating Steps 1 and 2
3
Press AI Sleep one or more times until AI SLEEP is displayed.
Result: The system will automatically switch off at the end of disc or
cassette.
4
To cancel SLEEP function, press AI Sleep one or more times until
OFF is displayed.
Microphone Function
The microphone enables the user to mix in his or her vocals
to sing-along with the music.
Preparation
Plug the microphone with a 6.3mm mic jack into microphone terminal.
1
Super Bass Sound
Your mini-compact system has a bass amplification function
called S.Bass (Super Bass Sound). This function makes the
sound more powerful and real.
1
2
Press the S.Bass button on the front panel.
Result: S. BASS is displayed and “SBS ON” is displayed for a few
seconds.
To cancel this function, press S.Bass button again.
Downloaded From Disc-Player.com Samsung Manuals
Turn the MIC Level knob to adjust the mic volume.
Cleaning Your Mini-Compact
System
Safety Precautions
GB
The following diagrams illustrate the precautions to be taken
when using or moving your mini-compact system.
To obtain the best possible results from your mini-compact
system, you must clean the following elements regularly:
The outer casing
The compact disc player
The cassette players (heads, rollers and drive capstans)
Always unplug the system from the wall outlet:
Before cleaning it
If you are not going to be using it for a long time
Outer Casing
Clean the outer casing regularly using a soft cloth and a light detergent. Do
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.
Ambient operating conditions:
Ambient temperature
5°C-35°C
Humidity
10-75%
Do not expose the unit to direct sun
radiation or other heat sources.
This could lead to overheating and
malfunction of the unit.
Compact Disc Player
1
2
Before playing a compact disc, clean it with a special CD cleaning
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
Regularly clean the player with a special cleaning disc (available from
your local dealer).
Tape Decks
1
2
Do not place potted plants or vases
on top of the unit. Moisture entering
the unit could lead to dangerous
electric shock and can cause
equipment damage. In such events
immediately disconnect the main
plug from the socket.
During thunderstorms, disconnect
the main plug from the socket.
Main voltage peaks due to lightning could damage the unit.
Press Push Eject (
) to open the cassette deck.
Use a cotton bud and a special cassette cleaning agent to clean the:
Head (1)
Rollers (2)
Drive capstans (3)
3
VOLUME
UP
1
2
DOWN
Remove the batteries from the
remote control, if not used for any
extended period.
Leaking batteries can cause serious
damage to the remote control.
When using headphones, take care
not to listen at excessive volumes.
Extended use of headphones at
high volumes will lead to hearing
damage.
Do not place heavy items on the
Do not remove any equipment panels.
main lead. Main cable damage can
The inside of the unit
lead to damage of the equipment (fire
contains live components, which
hazard) and can cause electric
cause electric shock.
Downloaded From
Disc-Player.com Samsung Manuals
shock.
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Although your system is very hard-wearing, it should not be
used in an excessively dusty environment or subjected to
shocks or extreme heat (close to heating appliances or in
direct sunlight, etc.).
If the unit emits an unpleasant odor when in use, unplug it
from the main supply and contact the after-sales service.
Before Contacting the After-Sales
Service
Precautions When Using Compact
Discs
GB
Handle your compact discs with care. Always hold them by the
edges to avoid leaving fingerprints on the shiny surface.
When you have finished playing a compact disc, always put it back
in its case.
Do not fix paper or adhesive tape to the discs and do not write on
the label.
Clean them with a special-purpose cloth.
Store your compact discs in a clean place, out of direct sunlight,
where they will not be exposed to high temperatures.
Always use compact discs marked
.
It always takes a little time to become familiar with a new appliance.
If you have any of the problems listed below, try the solutions given.
They may save you the time and inconvenience of an unnecessary
service call.
Problem
The system does not work
• The main lead is not correctly plugged into
a wall socket or the wall socket is not
switched on.
• The remote control batteries need replacing
or the polarity has not been respected.
• The Standby/On button has not been
pressed.
There is no sound
• The volume has been completely turned
down.
• The correct function (TUNER, CD, TAPE,
AUX) has not been selected.
• You have connected a set of earphones.
• The loudspeaker wires have been
disconnected.
• The Mute button has been pressed.
The Timer does not work
• The timer has been stopped by pressing
Timer On/Off.
In case it does not work, even the
action is taken as above.
• Press the S.Bass button for 5 seconds in
power ‘OFF’(standby), then it is returned the
original position (RESET)
COMPACT
DIGITAL AUDIO
G
E
N
E
R
A
L
Precautions When Using Audio
Cassettes
Check that the tape in the cassette is sufficiently taught.
To prevent erasing a cassette that you wish to keep, remove the safety
tab on the upper edge of the cassette. To record a cassette, where the
tab has been broken, simply cover the opening with adhesive tape.
When you have finished playing a cassette, always put it back in its case.
Store your cassettes in a clean place, out of direct sunlight, where
they will not be exposed to high temperatures.
Avoid using 120-minute cassettes as they place unnecessary strain
on the tape mechanism.
C
D
The compact disc player does not
/
start playing
M
P
3
C
D
C
A
S
S
E
T
T
E
S
R
A
D
I
O
Checks/Explanation
The mp-3 CD player cannot be
played.
The tape does not start playing
• The CD function has not been selected.
• The disc has been inserted face down or is
either dirty or scratched.
• The laser sensor is dirty or dusty.
• The system has not been installed on a flat,
horizontal surface.
• Condensation has formed in the player;
leave the system in a warm, airy room for at
least one hour.
• Use the PC to confirm if the extension is
*.mp3.
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
Reception is poor or no radio stations are received at all
• The TUNER function has not been selected.
• The radio frequency has not been correctly
selected.
• The aerial has been disconnected or is not
facing the right way. Turn it until you find the
best orientation.
• You are in a building that blocks radio
waves; you must use an outside aerial.
If the above guidelines do not allow you to solve the problem, take a note of:
The model and serial numbers, normally printed on the rear of the system
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG after-sales service.
Downloaded From Disc-Player.com Samsung Manuals
Technical Specifications
GB
SAMSUNG strives to improve its products at all times. Both the design specifications and these user
instructions are thus subject to change without notice.
RADIO
LW(option)
Usable sensitivity
SW(option)
Usable sensitivity
AM (MW)
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
FM
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
60 dB
40 dB
40 dB
54 dB
2%
58 dB
10 dB
0.6 %
COMPACT DISC PLAYER
Capacity
Frequency range
Signal/noise ratio
Distortion
Channel separation
Disc sizes
3 discs
20 Hz - 20 KHz (± 1 dB)
85 dB (at 1 KHz) with filter
0.05 % (at 1 KHz)
74 dB
Diameter: 120 or 80 mm. Thickness: 1.2 mm
TAPE DECK
Frequency range
Signal/noise ratio
Channel separation
Erasing effect
125 Hz ~ 8 KHz
40 dB
35 dB
50 dB
AMPLIFIER
Output power (6 Ω)
Channel separation
Signal/noise ratio
35 Watts / CH RMS, (total harmonic distortion: 10 %)
45 dB
75 dB
GENERAL
Dimensions
270 (W) x 317 (H) x 370 (D) mm
Downloaded From Disc-Player.com Samsung Manuals
THIS APPLIANCE IS MANUFACTURED BY:
ELECTRONICS
Downloaded From Disc-Player.com Samsung Manuals
AH68-01231A
Download PDF