BR608

BR608
RPM III IEC Integral HP
DC Motors
Rating Guide
IEC 112-280 Frame Sizes
Mission Statement
To be the best (as determined by our customers)
marketers, designers and manufacturers
of industrial electric motors,
mechanical power transmission products,
drives and generators.
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
IEC Variable Speed Industrial DC Motors
Table of Contents
DC Motors – RPM III
General Information
Introduction .........................................................................................................................................................................2
Motor Features
General Features .................................................................................................................................................................3
Standard Motor Features......................................................................................................................................................4
Technical Description of IEC RPM III DC Motors ............................................................................................................................8
Rating Sheets / Derate Curves .....................................................................................................................................................19
Dimension Sheets........................................................................................................................................................................88
Modifications
Modifications ..............................................................................................................................................................................120
1
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Introduction
IEC DC Motors
GENERAL TECHNICAL DATA
Ratings:
3.7 – 400 kW
Armature voltage:
Up to 600 V
Field voltage:
180/310 V
Insulation class:
H
Ambient temperature:
40°C Maximum
Speed:
Up to 5000 rpm
Balancing:
to DIN ISC 2373
Standards:
IEC and NEMA
Degree of Protection,
Method of Cooling
IP23–IC17, IP23-IC06
IP44–IC37
IP44–IC410
TYPICAL APPLICATION AREAS
Metals Industry
Mill drives, slitting line, tube mills, coating lines, press feeder drives
Textile Industry
Spinning, elongation, impregnation, winding and cutting
Forest Products Industry
Pulp preparation, super calenders, winders, rewinders, paper cutters
Printing Industry
Rotogravure, offset and letter printing presses
Rubber and Chemical Industry
Extruders, calenders, mixers, centrifuges
Machine Tool Industry
Spindle drives and positioning drives
General Industry
Air Conditioning, fans, pumps, conveyors
Material Handling
Conveyors, transfer lines
2
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
General Features
Baldor•Reliance integral HP DC motors are based on more than 90 years of
Baldor•Reliance motor technology that includes the Super T and the original RPM motor –
the first DC motor specifically designed to operate from solid-state rectified power. Built to
take on industry’s toughest jobs, RPM III motors have proven themselves through on-thejob performance. Whatever your DC requirements, Baldor•Reliance DC motors are the
best investment for your motor dollars to give you dependable DC motor performance for
years to come.
UNIQUE LAMINATED SQUARE FRAME FOR BETTER PERFORMANCE
Better performance begins with RPM III motors’ unique laminated square frame. The
square configuration packs up to 20% more active material into the same space as a
round frame of equivalent shaft height. This permits the Reliance motor to use a larger
armature for optimum power generation, and also provides more ventilation area for
better heat dissipation. You get more efficient space utilization without compromise in
performance or motor life.
RPM III laminated frame with
integral lead outlet. Typical of
frames GK112 through GK280.
The RPM III frames are built from insulated steel laminations, which present an electrical
barrier to the formation of eddy currents induced by the static power supply. Compared
to cast iron or rolled steel frames, the laminated frame greatly improves commutation for
optimum performance and significantly reduces heating for longer life.
Frame rigidity and strength equivalent to solid rolled steel construction are assured by
special assembly techniques to maintain minimum 200 psi interlaminate pressure.
ARMATURE AND FIELD WINDINGS DESIGNED AND TESTED TO INSURE
TROUBLE-FREE OPERATION
RPM III armatures are designed for superior commutation through the speed range to
insure trouble-free operation. The commutator is a dimensionally stable, homogeneous
unit that is easily serviceable. High or low bars are eliminated for better commutation.
Field coils are layer wound to eliminate air pockets which cause performance-limiting hot
spots. Field poles bolt securely to the frame to assure axial alignment and uniform air gap
between the poles and armature. This assures correct thermal and magnetic conduction
for optimum motor performance.
RPM III insulation systems provide an extra margin of safety for those tough industrial
applications with Class H materials and process techniques for optimum thermal, electrical
and mechanical strength.
RPM III wound frame with Class H
insulating materials.
EXCLUSIVE PLS®/POSITIVE LUBRICATION SYSTEM FOR LONGER LIFE
Longer life starts with the patented PLS/Positive Lubrication System. This system,
developed and tested by Baldor Electric engineers, provides positive motor bearing
protection in any mounting position or operating environment.
The grease directing passage (1) assures that incoming grease is uniformly distributed to
both sides of the bearing and to both inboard and outboard grease cavities. These cavities
(2&3) are generously sized to allow, in normal applications, one year operation before
regreasing is necessary. Grease relief is provided through a drain (4) or along the outboard
shaft (5).
Open bearing design allows the lubricant to remove heat from the bearing; inner and outer
grease cavities protect the bearings from contamination; close internal clearances (6) and
inner anti-churning vanes (7) prevent grease leakage into the motor.
This exclusive lubrication system design results in excellent bearing protection and cooler
bearing operation, which contribute to long, trouble-free service regardless of motor
application.
3
Inner and outer caps with PLS
lubrication system features assure
positive lubrication of RPM III motor
bearings.
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Standard Motor Features
This catalog is designed to help motor users quickly select and specify the
proper Baldor•Reliance Industrial Direct-Current Motor. Frame size information
on standard motors is given on the Frame Size pages. A complete listing and
definition of standard motor features is contained in this section. Application
requirements beyond the limits of the basic motor will require a modification
adder. Modifications are listed immediately following the Dimension Sheets
section. The Dimension Sheet and Performance Data Sections contain detailed
information required to select and apply DC motors.
The following features and operating conditions apply to standard basic integral
horsepower motors in frames GK1104 through GK2810. Additional features
or more stringent operating conditions require a modification adder from the
Modification Section.
IP23 enclosure with IC06 cooling and
optional filter
ENCLOSURES
The Standard Ratings section contains a listing of the following enclosures and
methods of cooling for motors cooled with customer supplied air:
IP23-IC17 (Separately Ventilated with Pipe-In Air)
IP44-IC37 (Separately Ventilated with Pipe-In Pipe-Out Air)
To obtain a motor with method of cooling IC06 (Force Ventilation with motor
mounted blower), add Mod. 130 – Blower without filter to the above basic motor.
Mod. 131 – Filter addition may be added for a motor operating in areas with
filterable contaminants.
The Standard Ratings section lists additional enclosures and methods of cooling
for motors operating in severe environments:
IP44-IC 410 (Totally Enclosed Non-Ventilated (TENV)
ALTITUDE
Sea Level to 1000 meters – Standard temperature rise is certified on the basis
that the motor will operate at an altitude from sea level to 1000 meters to a
maximum ambient of 40°C. IEC 34-1. Motors operating in higher altitudes must
have a modification added.
AMBIENT
Motors as listed are designed so that the temperature rise produced in the
motor, added to the standard 40° ambient temperature will not exceed the rated
temperature limit of the given insulation system.
Standard motors will provide rated output when operated in an ambient from
0° to 40°C. Operation below 0°C may require a motor with special brushes,
grease, shaft material and/or commutator construction.
Motors operating in higher ambient temperatures must have a modification
added from the Modification section.
BALANCE
Standard – Baldor•Reliance DC motors meet the dynamic balance limits of the
vibration grade N according to ISO273.
Motors required to meet vibration grade R or S must have a modification added
from the Modification section.
BASE SPEED VARIATION
The base speed for the standard motor shall be within the following tolerance
per IEC 34-1 when operated at rated full field with rated load and voltage with
4
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Standard Motor Features
the windings at working temperature. (Note that the variation in speed can be
above and below rated speed.)
kW per 1000 r/min
Base Speed Tolerance
Not less than 2.5 but below 10
± 7.5%
10 and upwards
± 5%
BEARINGS
Standard IEC DC motors utilize ball bearings. These bearings and their internal
clearances have been especially selected based on load carrying ability, thermal
stresses and speed range consistent with ample bearing life. Roller bearings are
used for belted duty on frames UGK180-UGK280 per the Modification section.
The “U” prefix indicates roller bearing for belted duty.
The patented Baldor•Reliance PLS/Positive Lubrication System, with deep
grooved, anti-friction ball bearings, gives complete bearing protection and long
bearing life.
ARMATURE CHOKE -SEPARATE FROM MOTOR
For good commutation, Baldor•Reliance RPM III IEC DC motors normally do
not require any armature choke. Where the motors are operated from static
converters, higher natural residual harmonic is produced, especially in the
lower speed range, which can cause vibrations. On a few drive applications,
these vibrations can be disturbing. Through an additional armature choke, the
armature current is smoothed, resulting in smoother motor operation. Refer to
Application Engineer – Baldor Electric Company.
RPM III construction typical of frames IEC GK132
through GK280
TERMINAL BOX
Standard construction for frames GK132 through GK280 provides an IEC
terminal box which can be located in any quadrant as long as no accessories
such as blowers are in that same quadrant.
CONNECTIONS
Standard motor leads are terminated in the terminal box to terminal strip.
DIRECTION OF ROTATION
Unless otherwise ordered, brush rigging is assembled for standard direction of
rotation, counter-clockwise for motors and clockwise for generators facing the
commutator end. Baldor•Reliance DC motors will operate in either direction
of rotation without changing the angle of the brush holders for normal field
weakened speed ranges.
FINISH-PAINT
Standard finish is Baldor Electric blue (RAL5010) modified epoxy, air dry enamel
with non-toxic rust inhibitors.
INSULATION
The standard RPM III insulation system is rated for Class H rise. It is a
thoroughly tested and proven system providing excellent protection against the
effects of mild chemical and high humidity. The armature and field coil insulation
systems were evaluated for thermal life based on “DC Motorette” test. Insulation
materials used in this system include: Nomex ground insulation, polyester film
coated high temperature moisture resistant magnet wire, resin saturated woven
glass sleeving, glass tape, high strength glass, reinforced resin filled top wedges
and coil retainers and coating with high temperature (180°C) varnish.
5
Armature assembly with Class H (180°C) insulation
system
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Standard Motor Features
LUBRICATION
IEC RPM III DC motors have the Patented PLS/Positive Lubrication System
developed and tested by Baldor Electric to provide positive motor bearing protection.
Open bearing design allows the lubricant to remove heat from the bearing.
Standard grease may be used in ambients down to –25°C.
MOUNTING
Foot and flange mounting in accordance with IEC standards.
Motors will operate successfully mounted on the floor, wall or ceiling and with
the shaft at any angle from horizontal to vertical. Hand-hole covers can be
interchanged as necessary on the commutator-end bracket eliminating the need
for bracket rotation when wall mounted.
OVERLOAD
Typical Integral foot construction of RPM III motors.
Momentary Overloads – Standard DC motors shall be capable of operating with
successful commutation for a period of one minute with a current load of 150
percent of the base speed full-load current at all speeds within the rated speed
range. Refer to the Application Data Section for additional information on overloads.
POWER SUPPLY
Standard IEC RPM III motors are specifically designed to operate on rectified power
supplies.
SERVICE FACTOR
Standard RPM III motors have a 1.0 service factor rating. Service factor is defined
as a multiplier which when applied to the rated kW, indicates a permissible kW
loading which may be carried without harm to the motor.
SHAFT EXTENSION AND METHOD OF DRIVE
IEC RPM III frames GK112 through GK160 are supplied with a drive end shaft
suitable for either coupled or belted drive application. Radial load must not exceed
the values listed in the Technical Description section.
Frames GK180 through GK280 are supplied with short shaft extensions that can
be used for coupled drives only. A modification must be made for frames with
roller bearing for belted drives.
MAXIMUM SAFE SPEED (MSS)
Refer to Technical Description for maximum permissible operating speed. These
speeds must not be exceeded under any condition. Motor control must hold the
maximum speed under any load condition including no-load within the maximum
safe speed. Drive systems whose design characteristics inherently prevent the DC
motor from exceeding the Motor Maximum Safe Operating Speed must prevent
the motor from exceeding the Maximum Safe Speed if a single component failure
should occur.
� A WARNING
THE MACHINERY BUILDER IS RESPONSIBLE FOR INSURING THAT DRIVEN
MACHINERY AND ALL DRIVE TRAIN MECHANISMS NOT SUPPLIED BY
BALDOR ELECTRIC AND PROCESS LINE MATERIAL ARE CAPABLE OF
SAFE OPERATION AT THE MAXIMUM SPEEDS, AS SHOWN IN TABLE
ON PAGE 11. FAILURE TO DO SO CAN RESULT IN DESTRUCTION OF
MECHANISM OR MATERIAL AND FLYING FRAGMENTS, ENDANGERING
OPERATING PERSONNEL.
6
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Standard Motor Features
TACHOMETER MOUNTING
IEC RPM III frames GK132 through GK250 have as a standard feature a
provision for mounting an integral AC or DC tachometer.
TEST-STANDARD
Each motor is given a routine test to determine that it is free from electrical
or mechanical defects and to provide assurance that it meets design
specifications. This test consists of:
(Test data is not supplied to customer without additional charges.)
Neutral check
Winding resistance
Commutation check
High potential test
No-load test at base speed and maximum field weakened speed
Full-load test at base speed and maximum field weakened speed
Integral RD-120 digital tachometer with cover
removed. Frames GK1303-GK2510
VOLTAGE
Armature and shunt field voltages are indicated on the Rating Sheet and
Performance Curve pages.
MODIFICATIONS:
Versatile Pre-engineered Modifications
A complete line of modifications are available for production motors to meet
special application requirements. The Modification Section of this catalog
includes a description on these additions to standard motors.
FRAME DESIGNATIONS
Frame diameters indicate the shaft height in millimeters; that is, 112, 132,
160, 180, 200, 225, 250, and 280. The first two numbers on the frame
designation refer to the frame diameter and the second two numbers are a
code for the core length.
Prefixes:
Prefix “GK” indicates an IEC DC motor.
Prefix “U” indicates a roller bearing for belted duty.
Prefix “L” indicates a longer commutator and commutator end bracket.
Integral DC or digital tachometer adds only
1.56 inches to motor length. Frames GK1303 GK2510.
CAUTION: Protective cover to guard against
contact with rotating shaft must be in place
when tachometer is not mounted.
Suffixes:
Suffix “Z” indicates a foot mounted motor with special shaft dimensions.
Suffix “Y” indicates a flange mounted motor.
Accessory Face for mounting tachometer.
Typical construction for Frame GK280.
7
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Table of Contents
Technical Description
ACCEPTANCE, SUPERVISION OF MANUFACTURE .............................10
MAXIMUM SAFE SPEED ...................................................................11
AIR SUPPLY .....................................................................................14
METHODS OF COOLING PER IEC 34-6 ............................................13
ALTITUDE ........................................................................................10
MOTOR PROTECTION DEVICES ........................................................17
AMBIENT TEMPERATURES ..............................................................10
MOTORS WITH FORCE VENTILATION – IC06 – MOD. 130. ...............14
APPLICATION ...................................................................................9
MOUNTING ......................................................................................12
AXIAL THRUST CAPACITY IN KILOGRAMS
NOISE LEVEL ..................................................................................17
FOR MINIMUM B-10 BEARING LIFE ..............................................15
OVERSPEED SWITCH/DC TACHO GENERATOR COMBINATION ........18
BALDOR DESIGN ............................................................................9
PAINTING, CORROSION PROTECTION ..............................................17
BEARING ARRANGEMENT FOR BELTED DUTY .................................15
PRESSURE SWITCH ........................................................................18
BEARING ARRANGEMENT FOR STANDARD DESIGN .........................15
RADIAL LOAD CAPACITY .................................................................15
BEARINGS .......................................................................................14
RATING ............................................................................................10
BLOWER MOTOR RATING FOR MOTOR MOUNTED BLOWERS
SELF-VENTILATED DC MOTORS, METHOD OF COOLING IC01 ..........10
ON FORCE-VENTILATED MOTORS ...............................................14
SHAFT END ....................................................................................16
BRAKES -DISC TYPE ......................................................................18
SLIDE RAILS ...................................................................................18
BRUSH WEAR PROTECTION .............................................................17
SPACE HEATER ................................................................................18
CONSTANT TORQUE CAPABILITIES – FRAMES GK1104-GK2810 ....10
SPECIAL BALANCING ACCORDING ISO 2373 ..................................16
COUPLINGS ....................................................................................16
STANDARD MOTOR FEATURES – SUMMARY ...................................10
CROSS REFERENCE BETWEEN IEC AND NEMA NOMENCLATURE ...13
STANDARDS, SPECIFICATION ..........................................................10
DC MOTOR PRODUCT LINE ..............................................................9
TACHOMETER GENERATORS AND PULSE GENERATORS .................18
DEGREE OF PROTECTION PER IEC 34-5 .........................................13
THERMISTORS .................................................................................17
DESIGN FOR GEARBOX FLANGE ATTACHMENT ..............................16
THERMOSTATS ................................................................................17
DIRECTION OF ROTATION ................................................................11
TRIPPING DEVICE RELAY .................................................................17
FILTER ATTACHMENT FOR MOTOR MOUNTED BLOWER –
VALIDITY .........................................................................................9
MOD. 131. ...................................................................................14
VIBRATION PROVED DESIGN ............................................................17
FLANGE CONCENTRICITY AND SHAFT RUN OUT ............................17
WARNING/HIGH LIMIT ......................................................................17
INSTRUCTION MANUAL ..................................................................18
ZERO-SPEED OPERATION ................................................................11
8
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Technical Description
VALIDITY
• High output rating per frame size
The technical description applies for Frames sizes IEC GK1104GK2810 of RPM III DC motors.
• Compact design by square laminated frame
APPLICATION
• Suitable for high current increase rates due to fully laminated
magnetic circuit
• Easy operation on static converter power supply
Direct current motors are suitable for all types of drives, with or
without speed control.
• Good commutation on static converter power supply
Industry applications are:
• Extended operation reliability due to class “H” insulation system
• Converting
• Integral foot construction of rigid vibration-resistant mechanical
assembly and maximum bearing support
• Conveying technology
• Low noise operation and smooth performance provided by
rabbet fit frame to bracket and integral foot construction
• Graphic arts industry
• Machine tool industry
• Faster response and shorter cycle times by low inertia design
• Metals industry
• Suitable for belt drive due to high admissible transverse forces
• Paper manufacturing
• Reliance patented PLS – Positive Lubrication System for
bearings
• Plastics processing industry
• Ship construction
• Adequately dimensioned terminal boxes with easy access for
customer cable connections
• Textile machinery industry
• Tire/Rubber industry
• General industry applications
• Position of terminal box changeable (even on site) to customers
requirements
BALDOR DESIGN
• Large hand hole openings and rotatable brush rigging for easy
access to all brushes
For over 100 years, Baldor Electric has been manufacturing
electrical machinery and introduced the first fully laminated
industrial direct current motor with square laminated crosssection 40 years ago, which has been continuously improved.
The new RPM III DC motors are based on these proven motors
and are additionally designed according to the latest technological
developments. The exceptional characteristics of this direct current
motor design are:
• Adaptable modular system for all types of design, protection
and cooling
• Extensive standard program of additional modifications.
DC MOTOR PRODUCT LINE
INTERNALLY VENTILATED MOTORS
GK1104-GK2810
GK1104-GK2810
GK1104-GK2810
Degree of Protection
IP23
IP44
IP23
Method of Cooling
IC17
IC37
IC06
3.7-404
3.7-404
3.7-404
Output-kW
TOTALLY-ENCLOSED MOTORS
GK1104-GK1610
Degree of Protection
IP44
Method of Cooling
IC410
Output-kW
2-16
9
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Technical Description
STANDARD MOTOR FEATURES – SUMMARY
ALTITUDE
Refer to GENERAL INFORMATION – page 2 for complete features.
Standard guarantees are made on the basis that the motor will
operate at an altitude from sea level to 1000 m per IEC 34-1.
Refer to Mod. 101 for motors operating at higher altitudes.
All machine components such as frame, end plates, bearing caps,
shaft, terminal box, etc., are machined on the latest CNC machine
tools. This ensures a uniformly high quality standard with very low
production tolerances. The motor feet are integral, which results
in a rigid, vibration-resistant design. Mainpoles are bolted securely
to the frame. Interpoles are integrated in the frame lamination for
frame size GK112 to GK280.
AMBIENT TEMPERATURES
Motors are designed so that the temperature rise produced in the
motors, added to the standard 40°C ambient temperature will
not exceed the rated temperature limit of the insulation system.
Standard motors will provide rated output when operated in
an ambient from 0 to 40°C. Operation below 0°C may require
a motor with special brushes, grease, shaft material and/or
commutation construction. Refer to Mod. 105 for motors suitable
for operation in higher ambients.
The shaft is designed for flexible coupling or for belt drive
operation.
On frame sizes GK132 to GK280, the position of the terminal
box can be changed on site to any required position, simply by
turning the frame. The terminal box can also be rotated to 4 x 90°
positions.
STANDARDS, SPECIFICATION
The direct current motors comply with IEC Publication 34.
All motors are designed according to the modular principle, and
are thus simple to modify. The attachment of external ventilation,
filter, pipe connection, tacho generator attachments etc. is
possible.
The shaft heights and other mounting dimensions are designed in
accordance with IEC 72.
ACCEPTANCE, SUPERVISION OF MANUFACTURE
In the standard design, the motors are equipped with a straight
shunt excitation winding for external excitation. A stabilizing shunt
winding (series field winding) can also be fitted, if necessary.
Direct current machines according the Rules of the Classification
Societies, are normally accepted by a representative of the
Classification Societies.
RATING
The acceptance and possible supervision of manufacture is
carried out in our Gainesville plant.
The nominal output rating shown in the selection tables is based
on the following conditions.
The fees of the Classification Societies for acceptance and
supervision of manufacturing will be separately charged according
to the costs incurred.
• Continuous operation -S1
• Ambient temperature -40°C maximum
SELF-VENTILATED DC MOTORS, METHOD OF
COOLING IC01
• Installation altitude -up to 1000 m above sea level
• Insulation material -Class “H”
Self-ventilated motors have a considerable smaller amount of
cooling-air volume at reduced motor speeds. Therefore for rating
and frame size of self-ventilated DC motor please contact the
Application Engineer – Baldor Electric Company.
• Standards -IEC and NEMA
• Motor supplied by fully controlled three-phase current bridge or
direct current generator or battery
CONSTANT TORQUE CAPABILITIES – FRAMES
GK1104-GK2810
• Rated armature and field voltages are specified on rating sheet
• Enclosures with IEC protection and method of cooling as
specified on the Standard Ratings page. The following IEC
ratings are specified.
Motor mounted blowers or separate force ventilation for motors
permit continuous full torque operation from base speed down to
approximately one percent of base speed when the blower motors
are operated on 50/60 Hz power.
Basic Ratings
• IP23 IC17 -Separately Ventilated with Pipe-In air
• IP44 IC37 -Separately Ventilated with Pipe-In Pipe-Out Air
• IP44 IC410 -Totally Enclosed Non-Ventilated (TENV)
Available with modification addition – IP23 IC06 – Motor cooled
by motor mounted blower (Refer to Mod. Section)
10
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Technical Description
MAXIMUM SAFE SPEED
DIRECTION OF ROTATION
DC motors are inherently capable of reaching speeds hazardous to
personnel and equipment if improperly connected or misapplied.
Operation of a shunt wound or compound wound motor without the
shunt field energized at the proper current may cause the motor to
reach a dangerous speed. Both the motor instruction manual and
the control instruction manual must be followed when the motor is
being connected and operated and the work must be performed by
qualified personnel.
All DC motors of the RPM III series are bidirectional, and equally
suited for both directions of rotation.
For force-ventilation with motor mounted blower, the specified
direction of rotation of the blower, marked by an arrow, must be
observed, to get the correct amount of cooling air.
ZERO-SPEED OPERATION
The permissible operating time at zero speed (armature at
standstill) with various percent rated armature currents is as
follows. Motor must have cooling air provided either by
separate ventilation or by motor mounted blower.
Protective devices such as overspeed switches, field loss relay
or tachometers must be used in the control circuit to limit motor
speeds to the values given in the following table unless the motor
speed is limited by the application.
The speeds are the maximum mechanically safe operating speeds
for frames with standard construction. These speeds must not
be exceeded under any condition. Motor control must hold the
maximum speed under any load condition including no-load
within the maximum safe speed. Drive systems whose design
characteristics inherently prevent the DC motor from exceeding the
Motor Maximum Safe Operating Speed must prevent the motor
from exceeding the Maximum Safe Speed if a single component
failure should occur.
Type
GK1104-GK1108
GK1110-GK1311
GK1606
GK1608
GK1610
GK1808
GK1810
GK2008
GK2010
GK2208
GK2210
GK2508
GK2510
GK2808
GK2810
RatedArmature
Current %
Permissible Time for
Zero Speed Operation with
Cooling Air to Motor
100
10 seconds
55
30 seconds
35
1,5 minutes
15
Continuously
The above values must not be exceeded during the
adjustment of armature current limitation under locked
armature condition and all other operating conditions.
Maximum Safe
Speed RPM
5000
4500
4500
4500
3400
4000
3400
3600
3400
3200
2875
3000
2350
3000
2450
� WARNING
THE MACHINERY BUILDER IS RESPONSIBLE FOR INSURING
THAT DRIVEN MACHINERY AND ALL DRIVE TRAIN
MECHANISMS NOT SUPPLIED BY BALDOR ELECTRIC
AND PROCESS LINE MATERIAL ARE CAPABLE OF SAFE
OPERATION AT THE MAXIMUM SPEEDS, AS SHOWN
IN ABOVE TABLE. FAILURE TO DO SO CAN RESULT IN
DESTRUCTION OF MECHANISM OR MATERIAL AND FLYING
FRAGMENTS, ENDANGERING OPERATING PERSONNEL.
11
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Technical Description
MOUNTING
Contact Application Engineer – Baldor Electric Company for
availability. Refer to Mod. 140 for IM B35 (83/85) and IM V1.
Mountings are according to DIN 42 950 or IEC 34 – Standard
construction is IMB3.
The most common mountings are shown in the table below:
Constructions acc. to
Constructions acc. to
DIN
42950
IEC-Code I
34-7
IEC Code II
B3
IM B3
IM 1001
B6 2
IM B6
IM 1051
B7 2
IM B7
IM 1061
B8 2
IM B8
IM 1071
V5 2
IM V5
IM 1011
Design
DIN
42950
IEC-Code I
34-7
IEC Code II
B3/B5
IM B35
IM 2001
V1/V5 2
IM V15
IM 2011
IM B5 1
IM 3001
V1
IM V1
IM 3011
V3
IM V3
IM 3031
B5 1
Design
1 Motor construction IM B5 generally designed as IM B35.
2 Mechanical support required.
V6 2
IM V6
IM 1031
12
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Technical Description
DEGREE OF PROTECTION PER IEC 34-5
IC17 Cooling air is provided by a customer supplied source piped
into the motor, circulated through the motor and discharged
to the ambient surrounding the motor. The cooling air inlet
is on the non-drive end (commutator end) and the outlet air
leaves the motor via the louvers on the drive side. Motors
with this method of cooling are listed on the Standard
Ratings pages – IP23 IC17 IC37.
Degree of protection for the motor consists of the letters IP
(International Protection) followed by two characteristic numerals
indicating the amount of protection offered by the motor enclosure.
The first number indicates the degree of protection provided by the
enclosure with respect to persons and objects. The second number
indicates the degree of protection provided by the enclosure with
respect to harmful effect due to ingress of water.
IC37 Cooling air is provided by a customer supplied source piped
into the motor, circulated through the motor and piped out
of the motor to an area remote from the motor. Motors with
this method of cooling are listed on the Standard Ratings
pages – IP23 IC17 IC37.
Designations for various degrees of protection for IEC DC motors
are as follows:
IP23 Motor is protected against ingress of solid objects greater
than 12 mm and against dripping water when the machine is
tilted at any angle up to 15° from its normal position. Motors
with this protection may be priced from the basic price pages.
IC410 Air inside the motor is circulated by an internal fan.
Heat is conducted through the frame of the motor to the
surrounding ambient air. Motors are listed on the Standard
Ratings pages – IP44 IC410.
IP44 Motor is protected against ingress of solid objects greater
than 1 mm and against water, splashing against the machine
from any direction. Motors with this protection may be priced
from the basic price pages.
IC411 Air inside the motor is circulated by an internal fan. Heat
is conducted through the frame of the motor and removed
by a fan connected to the motor shaft. Motor cooling is
dependent on motor speed. Motor is identified as IP44
IC411. Motors with this type of cooling are not contained in
this catalog.
IP54 Motor is protected against entrance of dust in sufficient
quantity to interfere with satisfactory operation of the
machine and against water splashing against the machine
from any direction. Price motors with this degree of protection
by pricing frames with IP44 protection and add Mod. 183A
Dust-tight Features.
IC416 Air inside the motor is circulated by an internal fan. Heat
is conducted through the frame of the motor and removed
by a fan driven by a separately powered AC motor. Motor
cooling is independent of DC motor speed. Motors with this
type of cooling are not contained on this catalog.
IP55 The entry of dust is not totally prevented, but dust cannot enter
in sufficient quantity to interfere with satisfactory operation of
the motor. Projection of water by nozzle from any direction has
no harmful effect.
CROSS REFERENCE BETWEEN IEC AND NEMA
NOMENCLATURE
METHODS OF COOLING PER IEC 34-6
DEGREE OF PROTECTION
IEC
NEMA
IP22
DPG or DPFV
IP23
Splashproof
IP44
TENV, TEFC or TEAO
IP54
Dust-Tight Features
Methods of cooling the motor are designated by the letter “IC”
(International Cooling) followed by numerals and letters representing
the circuit arrangement, the coolant and the method of movement
of the coolant. The first number defines the cooling circuit
arrangement. The second number defines the method of movement
of the primary coolant (air). The letter for the coolant may be
omitted when the coolant is air.
Designations for various methods of cooling IEC DC motors are as
follows:
METHOD OF COOLING
IEC
NEMA
IC01
DPG
IC06
DPFV
IC17
DPSV (Drip-proof Separate Ventilated)
PIPO(Pipe-In Pipe-Out, Totally-Enclosed Pipe
IC37
Ventilated, Totally Enclosed Separately Ventilated)
IC410
TENV
IC411
TEFC
IC416
TEAO-Inline or Piggyback
A/A-Totally Enclosed Dual Cooled with Air-to-Air
IC616
Heat Exchanger
IC01 Cooling air is drawn directly from the ambient surrounding
the motor and is discharged out. Air is moved by an internal
fan mounted on the motor shaft making the amount of
cooling air dependent on motor speed. Motors with this
method of cooling are not contained in this catalog but may
be available from Baldor Electric Company – Application
Engineer.
IC06 Cooling air is drawn directly from the ambient surrounding
the motor but is circulated through the motor by means
of a blower driven by a constant speed AC motor making
the amount of cooling air independent of DC motor speed.
Motors with this method of cooling may be obtained by
adding Mod. 130 – Blower without Filter – to the Basic
motors – IP23 IC17 IC37.
13
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Technical Description
AIR SUPPLY
BLOWER MOTOR RATING FOR MOTOR MOUNTED
BLOWERS ON FORCE-VENTILATED MOTORS
Cooling air through a self-ventilated or forced-ventilated motor must
be clean and have relative humidity between 30% and 100% with
no free water in the air. Use of damp, cool outside air with high
humidity and free water may cause the motor to flash over. Use
of excessively dry air may cause excessive brush and commutator
wear. Cooling air temperature must not exceed the maximum
ambient temperature indicated on the motor nameplate (standard
40°C). Cooling air temperature must not be lower than 0°C to
provide base speed and regulation within limits. Use of outside air
below 0°C may cause excessive brush and commutator wear due
to the low humidity. Cooling air absolute humidity must be at least
71 grains per cubic meter.
Frame
GK1104-GK1110
GK1303-07
GK1309-11
GK1606
GK1608-10
GK1808-10
GK2008-LGK2010
GK2208-LGK2210
GK2508
GK2510
GK2806-10
Separately ventilated motors must have the following volume of air
to adequately cool the motor unless the motor nameplate specifies
a different value.
NOTE: Motors located in damp, moist environments must have
space heaters or fields energized at 50% voltage to protect against
condensation when the motor is not operating.
Frame
Speed
RPM
Air Volume
M3/min.
GK1104-GK1110
GK1303-07
GK1309-11
GK1606
GK1608-10
GK1808
GK1810
GK2008
GK2010
GK2208
GK2210
GK2508-10
GK2806-10
All
All
All
All
All
All
All
All
All
All
All
All
All
4.3
8.4
8.4
12
11
15
15
20
20
27
27
34
55.5
Hp(1)
.75
.75
.75
.75
.75
1.5
1.5
2.5
2.5
2.5
4.2
Amps(1)
1.2
1.2
1.2
1.2
1.2
2.6
2.6
3.8
3.8
3.8
6.0
(1) Rating for 380, 3-phase, 50 Hz.
FILTER ATTACHMENT FOR MOTOR MOUNTED BLOWER
– MOD. 131.
Static
Pressure
mm-Water
50.8
57.2
104.1
50.8
86.4
95.3
95.3
101.6
101.6
129.5
129.5
101.6
190.5
With inadequate purity of the cooling air, the attachment of a filter
is recommended. The filter is fitted for easy replacement. The filter
is attached to air inlet of the blower. The rated output of the DC
motor is not affected by the filter (no reduction).
BEARINGS
The antifriction bearings are designed for a long life time and
extended relubrication periods. They ensure low noise and low
vibration operation. Standard DC motors utilize ball bearings. These
bearings and their internal clearances have been especially selected
based on load carrying ability, thermal stresses and speed range
consistent with ample bearing life. Roller bearings are used on
belted duty frames UGK180 through UGK280. Refer to Mod. 126.
All motors have the proven and patented Baldor-PLS SYSTEM
(Positive Lubrication System). This system ensures safe and reliable
lubrication of the antifriction bearings.
MOTORS WITH FORCE VENTILATION – IC06 – MOD. 130.
Standard Ratings are for separately force ventilated motors with
customer supplied air – IC17 and IC37. Refer to Mod. 130 for the
addition of a motor mounted blower to force ventilate the motor
with ambient air – IC06. The blower is mounted on top or to one
side at the non-drive end bracket.
Protective device, e.g. thermistors, thermostats and/or air pressure
switch, are recommended in the event of cooling air loss on either
separately ventilated motors or force ventilated motors.
The attached external blower is driven by a 3-phase AC motor. The
standard external blower motors are designed with a winding for
380-420V, 3-phase, 50 Hz. The nominal current required is stated
in the following table.
14
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Technical Description
BEARING ARRANGEMENT FOR STANDARD DESIGN
BEARING ARRANGEMENT FOR BELTED DUTY
Especially suitable for elastic coupling operation.
Antifriction
Bearing Type
Frame Size
GK112
GK132
GK160
GK180
GK200
GK225
GK250
GK280
Refer to Mod. 126.
Especially suitable for belt or gear drive operation.
Drive End
Non-drive End
C208
C310
C313
C215
C217
C219
C219
6222
C206
C209
C210
C211
C213
C216
C219
6219
Frame Size
GK112
GK132
GK160
UGK180
UGK200
UGK225
UGK250
UGK280
Anti-friction Bearing Type
Drive End
Non-drive End
C208
C206
C310
C209
C313
C210
NU215
C211
NU217
C213
NU219
C216
NU222
C219
NU222
6219
AXIAL THRUST CAPACITY IN KILOGRAMS FOR MINIMUM B-10 BEARING LIFE
OF 10,000 HRS. WITH NO EXTERNAL OVERHUNG LOAD
Frame GK
1104-10
1303-11
1606-10
1808-10
2008-10
2208-10
2508
2510
L2510
GK2808
GK2810
2500 rpm
134
231
243
295
383
474
612
594
580
612
AXIAL THRUST CAPACITY KILOGRAMS
Horizontal Mounting
Vertical Mounting (1)
1750 rpm
1150 rpm
850 rpm
2500 rpm
1750 rpm
1150 rpm
156
189
216
139±20
161±20
195±20
256
290
318
243±62
268±62
302±62
270
306
329
263±116
290
327
329
374
404
324±163
361
404±163
426
483
522
417±203
463
524
526
596
644
526±300
581±300
655
739
907
1021
653±297
826±297
1002±297
717
896
998
622±374
821±374
998±374
703
871
987
658±424
812±424
991±424
748
908
1,021
714±374
828±374
986±374
850 rpm
223±20
329±62
349
451
561±203
705
1123±297
1116±374
1111±424
1123±374
(1) Thrust capacity for vertical mounting includes a constant whose value is plus or minus depending on the direction of the thrust load. The
constant is plus for thrust loads acting upward against the force of gravity and minus for loads acting downward with gravity.
RADIAL LOAD CAPACITY
Frame
1104-10
1303-11
1606-10
(1)
1808-10
(1)
2008-10
(1)
2208-10
(1)
2508-10
(1)
280
2500 rpm
227
488
726
1225
1361
1724
2722
2313
Radial Load Capacities at the End of the Shaft -Kilograms (2)
1750 rpm
1150 rpm
256
284
570
510
794
896
1225
1225
1361
1361
1724
1724
2722
2722
2631
2631
850 rpm
510
941
1225
1361
1724
2722
2631
(1) Data for motors with roller bearings on the drive end.
(2) CAUTION: The use of these radial load capacities requires the accurate calculation of the radial load for the application. Radial loads for gears, sprockets, and flywheel
are usually accurately determined, but the radial loads due to v-belt drives are subject to miscalculations because they do not include all of the pre-tension load (belt
tightening). The calculations of the radial load for a V-belt drive must include the pre-tension for transmitting the horsepower, pre-tension for centrifugal force on the
belts, pre-tension for high starting torques, rapid acceleration or deceleration, pre-tension for drives with short arc-of-contact between the V-belt and sheave, and low
coefficient of friction between belt and sheave caused by moisture, oil or dust.
15
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Technical Description
DESIGN FOR GEARBOX FLANGE ATTACHMENT
COUPLINGS
Refer to Mod. 244.
The DC motors can be connected to the driven machine by elastic
couplings. Rigid couplings are not permitted for electric motors
with antifriction bearings.
Where motors are attached directly to the gearbox flange without
an adapting frame, an oil-tight flange design is required.
The couplings must be drilled, grooved and dynamically balanced.
In addition, the drive side bearing must be protected by a radial
shaft lip seal ring (oil seal) to prevent the penetration of lubricants.
Refer to Mod. 275. During operation, the shaft lip seal must be
moistened or lubricated by occasional oil spray or air containing
oil mist. On V3 type motors, where the gearbox oil has continuous
contact with the shaft lip seal, the penetration of lubricants into the
motor, has to be prevented by a shaft face seal. Refer to Mod. 276.
Where delivery of the motors with coupling is ordered, the driving
coupling part will be finish machined and will be supplied mounted
on the shaft. The driven coupling part will be supplied pre-bored.
Refer to Mods. 177 and 178.
SPECIAL BALANCING ACCORDING ISO 2373
The rotors are dynamically balanced with inserted key. The
mechanical balancing is normally equivalent to vibration grade N
according to ISO 2373.
The continuous operation temperature of the gearbox oil must not
exceed 100°C. It has to be checked, whether the higher transverse
forces caused by the gearbox pinion require a special drive side
bearing.
For increased requirements on the mechanical balancing, vibration
grade R or S can be achieved by additional measures. Refer to
Mods. 112 and 113 for vibration grade R and S.
SHAFT END
The shaft ends are designed in accordance with DIN 748, with key
ways according to DIN 6885, sheet 1. The keys will be supplied
with the motor.
Limiting values of vibration velocity for vibration grades N, R and S
are given in the table.
The dimensions of the standard shaft ends are shown in the
dimension sheet section. Special shaft dimensions per DIN or
NEMA or a special non-drive end shaft can be supplied. Refer to
Mods. 269-279.
LIMITING VALUES OF VIBRATION VELOCITY OF
ELECTRICAL MACHINES ACCORDING TO ISO 2373
Max. r.m.s. values of vibration
velocity in mm/sec.
Tolerance + 10%
v eff in mm/s for frame sizes
Speed RPM
Frame 1104-10
v eff
Frame 1303-2210
v eff
Frame 2508-10
v eff
N (normal)
600-3600
1.8
2.8
4.5
R (reduced)
600-1800
>1800-3600
0.71
1.12
1.12
1.8
1.8
2.8
S (special)
600-1800
>1800-3600
0.45
0.71
0.71
1.12
1.12
1.8
Vibration Grade
Above 3600 rpm the limiting values must be computed linear.
16
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Technical Description
NOISE LEVEL
supervised directly, complete winding over temperature protection
is not ensured only by thermistors. Therefore the use of overcurrent
tripping devices is required additionally.
Baldor•Reliance motors have a noise level as stated in the
following table:
Motor Type GK
Measuring surfaces-noise level
at motor speed 2500 rpm dB(A)
112
75
132
82
160
83
180
83
200
85
225
87
250
88
280
88
Thermistors are built into each frame winding (e.g. main coils,
intercoils and pole face winding (if existing) at the air outlet side).
The functions “warning” and “switch off” are available. Each
function normally consist of 3 thermistors.
WARNING/HIGH LIMIT
Two sets of the same function are inserted in the stator windings.
Each set is connected in series and brought out to the terminal
box. When ordering, the required function (warning or high limit)
has to be advised.
TRIPPING DEVICE RELAY
The tripping device must be supplied as part of the control system
in the control panel. The number of tripping devices depends on
the required functions (warning and/or high limit). Each function
requires a separate tripping device.
Mean Sound Pressure Level, dBA at 1 m, with motor operating
at base speed and full load on Power Supply. Levels are nominal
value and may vary +3, -7 dBA on specific motors. All data based
on the mean value of four microphone positions under free field
conditions (R-infinity). Refer to Baldor Electric if guaranteed values
are required).
THERMOSTATS
Refer to Mods. 410-411.
Thermostats can be inserted in the intercoil windings to help
protect the windings against over heating. Due to the different
thermal time constants and because the armature windings
cannot be supervised directly, complete winding over temperature
protection is not ensured only by thermostats. Therefore the use of
overcurrent tripping devices is required additionally. Thermostats
are built into the intercoil windings at the air outlet side. When
reaching the tripping temperature, bi-metal contacts are actuated.
VIBRATION PROVED DESIGN
Refer to Mod. 440.
If DC motors are exposed to shocks or violent vibrations, this has
to be advised in the order specification. In those cases a special
design is recommended.
PAINTING, CORROSION PROTECTION
Generally, the internal motor surfaces are not corrosion protected.
The outside motor surfaces are primer coated and finished with a
synthetic paint, color RAL 5010 blue. Color RAL 6011 green can
be supplied on request without extra charge. Other colors require
an additional adder.
BRUSH WEAR PROTECTION
Non-potential free – refer to Mod. 155A.
The surface protection is appropriate for operation in dry or slightly
humid ambient. Improved corrosion protection is recommended
in moist and wet ambient as well as for operation in chemical
aggressive areas.
Brush wear sensor provides output from motor when brushes wear
to a predetermined length. Signal gives indications of brush wear
so that corrective action may be taken to prevent malfunction of
the motor and possible damage to the commutator from worn
brushes. The voltage signal is the same magnitude as the motor
armature voltage.
FLANGE CONCENTRICITY AND SHAFT RUN OUT
Potential free – refer to Mod. 155B.
Flange motors will be delivered normally according DIN 42 948,
tolerances class “N” (normal).
Similar to Mod. 155A except a microswitch on the brush holder is
actuated when the brush wears to a pre-determined length. The
micro-switch contact may be used to provide a signal indicating
brush wear.
For special requirements tolerance class “R” (-reduced) will be
available. Refer to Application Engineer – Baldor Electric Company.
MOTOR PROTECTION DEVICES
THERMISTORS
Refer to Mods. 412-416.
Thermistors can be fitted in the motor frame windings to protect
the windings against over heating. Due to the different thermal
time constants and because the armature windings cannot be
17
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Technical Description
SPACE HEATER
PRESSURE SWITCH
Refer to Mod 280.
Refer to Mod. 134.
When operating in humid areas and under highly fluctuating
ambient temperatures, condensed water can be expected inside of
the motor during longer stand still periods. In those cases a space
heater should be built into the motor, to prevent the occurrence of
condensed water during motor stand still.
For protection against cooling air loss on force ventilated motors an
air pressure switch is recommended. In case of cooling air loss this
pressure switch immediately gives the respective signal for warning
or switch off to the protection system, to prevent the overheating of
the motor windings.
The required supply has to be advised on the order specification.
Alternatively a reduced field voltage (approx 30-40% of nominal
field voltage) supplied to the exciter field (terminals F1-F2) can be
used for heating the motor during stand still.
The pressure switch is installed inside the motor at the air inlet
end.
The space heater has to be switched off during motor operation.
Refer to Mod. 150-150A.
Frame
112
132
160
180
200
225
250
280
Volts
120
240(1)
480
120
240(1)
480
120
240(1)
480
120
240(1)
480
120
240(1)
480
120
240(1)
480
Watts
75
75
125
90
90
125
140
140
125
250
250
165
250
300
280
306
306
306
BRAKES -DISC TYPE
These motor mounted brakes are continuously rated, nonadjustable, electrically released and spring set applicable for both
holding and stopping service within the nominal torque ratings.
Brakes used for frequently repeated stopping service or other
severe applications may be limited to thermal capacity and should
be referred to Baldor Electric Application Engineer.
Amps
0.62
0.31
0.26
0.75
0.38
0.26
1.17
0.58
0.26
2.08
1.08
0.35
2.08
1.25
0.58
2.55
1.28
.64
Motor mounting position, i.e., horizontal or vertical shaft up, or
down, or ceiling, must be specified on the order.
Brakes can be mounted on frames through 250 on all enclosures.
Frames 280 and larger must have separately mounted shoe brakes
– add standard double shaft extension for customer mounting
of brake wheel. For some combinations of brake and motor, the
brake may extend below the motor feet. Special motor mounting is
required to provide clearance. Refer to Baldor Electric for special
brakes and brakes of specific manufacturer.
SLIDE RAILS
Refer to Mod. 121.
If there is no retensioning wheel on a belt drive, the belt can be
retensioned by the use of slide rails designed acc. to DIN 42 923.
(1) May be operated on 220 Volts
The slide rail attachment to the respective motors and the slide rail
dimensions are shown in the slide rail dimension sheet.
TACHOMETER GENERATORS AND PULSE
GENERATORS
INSTRUCTION MANUAL
Refer to Mods. 355-546.
Each Baldor•Reliance RPM III motor is supplied with a
comprehensive instruction manual containing instructions for
mounting, start-up and maintenance of the motor. These manuals
must be read carefully prior to installation, operation and/or
maintenance of the equipment.
Standard tacho generators will be fitted normally on the non-drive
side bracket, connected to the motor through a backlash-free,
torsionally rigid coupling.
OVERSPEED SWITCH/DC TACHO GENERATOR
COMBINATION
Refer to Mod. 355A.
Overspeed switches are used to prevent over speed or for
monitoring the start of a motor. Both switch contacts – one n.c.
contact and one n.o. contact – are adjusted to the requested
values in the manufacturing plant before dispatch. The
required values for the tripping speed have to be advised in the
specification.
18
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
Enclosure
Method of Cooling
IP23 IC17
or
IP23 IC06
or
IP44 IC37
IP44-IC410
(TENV)
IEC Frame
Type GK
Nominal Rating
At 1000 RPM kW
Derate Curves
Page
Rating Sheet
Page
112
GK1104
GK1106
GK1108
GK1110
4.1
5.1
6.1
6.3
20
22
24
26
21
23
25
27
132
GK1303
GK1305
GK1307
GK1309
GK1311
9.7
11.7
14.9
17.5
21.4
28
30
32
34
36
29
31
33
35
37
160
GK1606
GK1608
GK1610
27
36
47
38
40
42
39
41
43
180
GK1808
GK1810
54
70
44
46
45
47
200
GK2008
LGK2008
GK2010
LGK2010
96
96
106
106
48
48
50
50
49
49
51
51
225
GK2208
LGK2208
GK2210
LKG2210
156
156
173
173
52
52
54
54
53
53
55
55
250
GK2508
GK2510
175
248
56
58
57
59
280
GK2808
GK2810
280
343
60
62
61
63
112
GK1104
GK1106
GK1108
GK1110
1.5
1.9
2.4
2.7
64
66
68
70
65
67
69
71
132
GK1303
GK1305
GK1307
GK1309
GK1311
2.3
2.7
3.2
3.5
4.2
72
74
76
78
80
73
75
77
79
81
160
GK1606
GK1608
GK1610
6.8
8.7
9.5
82
84
86
83
85
87
19
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1104
Schutzart..................................................................................................................IP23............................................................................................................... Enclosure
Erregerleistung ....................................................................................................... 550 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ...........................................................................120 ms........................................................................ Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.029 kg–m2.............................................................................................. Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.115 kg–m2......................................................................................... Flywheel Effect GD2
Maschinengewicht ..................................................................................................84 kg........................................................................................................ Motor Weight
Fremdlüfter: Fördermenge .................................................................................. 4.3 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz ........................................................................... 0.56 kW / 1.2 A ......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 5000 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 5000 RPM
20
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1104
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
3605
—
1.0
—
—
3205
3745
2.0
—
—
2860
3350
3.0
—
—
2560
3010
4.0
4125
—
2135
2515
5.0
3455
—
1665
1975
6.0
2740
—
1450
7.0
1720
2395
2835
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
4500
14.4
63.2
84
—
—
—
—
—
—
—
—
Wirkungsgrad
Efficiency
%
—
—
—
—
4500
12.7
56.5
83
4500
14.8
56.2
85
—
—
—
—
—
—
—
—
4500
11.3
50.6
82
4500
13.2
50.3
84
—
—
—
—
—
—
—
—
4500
10
45.2
81
4500
11.7
45
83
4500
13.8
38.6
86
—
—
—
—
3950
8.7
40.1
79
3900
10.2
40
81
3850
12.9
36.5
85
—
—
—
—
3300
6.9
32.8
76
3250
8.1
32.7
78
3050
11.2
32.5
82
—
—
—
—
3000
5.9
28.8
74
2950
7
28.7
76
2800
9.7
28.6
81
3000
10.2
25.2
84
21
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.32
3.4
10.7
0.40
4.2
10.4
0.49
5.1
10.4
0.58
6.2
10.7
0.78
8.7
11.2
1.3
13
10.3
1.6
17
10.8
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1106
Schutzart................................................................................................................. IP23............................................................................................................... Enclosure
Erregerleistung ....................................................................................................... 600W ........................................................................................................ Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 120 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................. 0.033 kg–m2............................................................................................. Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.13 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht ................................................................................................. 93 kg......................................................................................................... Motor Weight
Fremdlüfter: Fördermenge .................................................................................. 4.3 m3/min ............................................................................................. Blower: Air Volume
Motordaten für 380 V, 50 Hz ........................................................................... 0.56 kW /1.2 A............................................................................ Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 5000 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 5000 RPM
22
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1106
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
3245
3795
1.0
—
—
2810
3285
2.0
—
—
2485
2915
3.0
4000
—
2205
2600
4.0
3560
—
1975
2325
5.0
3205
3740
1635
1935
6.0
2680
3135
1270
1510
7.0
2110
2470
1100
8.0
1315
1850
2170
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4500
15.9
69.7
85
4500
17.8
66.6
86
—
—
—
—
—
—
—
—
4500
14.2
62.9
84
4500
16.3
61.5
85
—
—
—
—
—
—
—
—
4500
12.5
56.2
82
4500
14.6
56
84
4500
18.4
51.5
87
—
—
—
—
4400
11.1
50.2
81
4300
13
50.1
83
4100
17.1
48.1
86
—
—
—
—
4100
9.7
44.7
80
4100
11.5
44.7
82
3800
15.6
44.3
85
3800
16
38.8
86
3400
8.5
39.8
77
3400
10
39.7
80
3200
13.7
39.4
83
3200
14.6
35.8
85
2800
6.6
32.5
73
2800
7.8
32.4
76
2650
10.9
32.3
81
2650
12.7
32.2
82
2550
5.6
28.5
70
2550
6.7
28.4
74
2450
9.4
28.3
79
2450
11.1
28.3
81
23
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.29
3.3
11.6
0.37
4.3
11.6
0.46
5.3
11.4
0.58
6.5
11.2
0.73
7.9
10.9
0.96
11
11.5
1.5
17
11.3
1.85
21
11.4
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1108
Schutzart................................................................................................................. IP23............................................................................................................... Enclosure
Erregerleistung ....................................................................................................... 650W ....................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 120 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................. 0.040 kg–m2............................................................................................. Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.16 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht .................................................................................................111 kg........................................................................................................ Motor Weight
Fremdlüfter: Fördermenge................................................................................... 4.3 m3/min ............................................................................................. Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 0.56 kW / 1.2 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 5000 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 5000 RPM
24
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1108
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
2505
2935
1.0
4000
—
2160
2535
2.0
3475
—
1905
2245
3.0
3080
3580
1685
1990
4.0
2745
3200
1500
1780
5.0
2465
2880
1240
1475
6.0
2055
2405
950
1140
7.0
1615
1900
—
8.0
985
1405
1660
Feldsteuerg
Field
Control
U/min
RPM
Ankerkreis / Armature
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4500
14
66.1
84
4500
16
64
85
4500
19.4
56.3
87
—
—
—
—
4500
12.7
60
82
4500
14.5
58.4
84
4500
18.2
53.4
87
—
—
—
—
4200
11.3
54.1
81
4200
13
53
83
4200
16.8
49.6
86
4200
18.6
47.3
87
3800
10
49.2
79
3800
11.6
48.3
81
3700
14.75
46
85
3700
17.2
44.2
86
3550
8.9
44.4
77
3500
10.5
44
80
3400
14.0
42.2
84
3400
15.8
41
85
2900
7.7
39.3
75
2900
9.1
38.9
78
2800
12.3
37.7
82
2800
14.1
37
84
2400
5.8
31.8
70
2400
7
31.6
73
2350
9.7
31
79
2350
11.3
30.5
81
—
—
—
—
2150
6.0
28.1
71
2100
8.6
27.8
77
2100
10
27.5
79
25
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.33
4.3
13.0
0.42
5.5
13.1
0.54
6.8
12.5
0.68
8.3
12.3
0.8
10.1
11.9
1.1
14
12.5
1.8
21
11.9
2.2
27
12.2
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1110
Schutzart................................................................................................................. IP23............................................................................................................... Enclosure
Erregerleistung ...................................................................................................... 750 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 150 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................. 0.043 kg–m2............................................................................................. Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.17 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht .................................................................................................120 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge................................................................................... 4.3 m3/min ............................................................................................. Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 0.56 kW / 1.2 A ......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
26
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1110
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
2250
2630
1.0
3575
4145
1930
2270
2.0
3105
3605
1700
2000
3.0
2750
3200
1500
1770
4.0
2450
2855
1335
1580
5.0
2195
2570
1115
1320
6.0
1835
2150
—
1025
7.0
1445
1695
—
8.0
—
1260
1485
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4500
12.5
57.6
84
4500
14.5
57.2
85
4500
18.8
54.8
87
4500
20.8
52.2
88
4500
11.9
56.1
82
4500
13.7
55
84
4500
17.7
51.9
86
4500
19.6
49.6
87
4250
10.6
50.6
80
4150
12.4
50.4
82
4000
16.1
47.8
85
4150
18
45.8
87
3750
9.6
46.4
78
3700
11.2
46.4
81
3550
15
44.7
84
3650
16.9
43.4
86
3425
8.5
42.3
76
3425
9.9
42
79
3250
13.5
41.1
83
3350
15.2
39.5
85
2950
7.1
36
74
2900
8.4
35.9
77
2775
11.6
35.6
82
2850
13.3
34.8
84
—
—
—
—
2450
6.5
29
73
2300
9.2
29
78
2300
10.8
29
81
—
—
—
—
—
—
—
—
2100
7.9
25.5
76
2100
9.4
25.7
79
27
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.35
4.7
13.4
0.45
6.1
13.5
0.58
7.5
13.0
0.72
9.3
12.8
0.91
11
12.1
1.2
16
13.6
1.9
24
13.0
2.30
30.0
13.0
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1303
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ....................................................................................................... 750W ....................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 150 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................. 0.098 kg–m2............................................................................................. Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.39 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht ................................................................................................ 154 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge .................................................................................. 8.4 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 0.56 kW / 1.2 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
28
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1303
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
3010
3525
1.0
—
—
2425
2845
2.0
3885
—
2090
2460
3.0
3375
—
1790
2115
4.0
2915
3395
1375
1635
5.0
2280
2670
1105
1325
6.0
1865
2185
820
7.0
995
1430
1690
Feldsteuerg
Field
Control
U/min
RPM
Ankerkreis / Armature
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4200
26.7
118
84
4200
30.6
116
86
—
—
—
—
—
—
—
—
4200
23.5
106
83
4200
27.4
105
84
4200
35.6
100
87
—
—
—
—
4200
20
91
81
4200
23.2
90
83
4150
31.2
88
86
—
—
—
—
4200
16.4
76
79
4200
19.1
75
81
3800
26.3
75
85
3800
30.5
75
86
3200
13.4
65
75
3200
15.9
65
78
3000
21.9
64
82
3000
25.5
64
84
2700
10.9
55
72
2700
13.1
55
75
2650
17.6
52.5
81
2650
20.5
52
83
2250
8
43.5
66
2250
9.7
43.5
70
2200
13.6
42.2
77
2200
15.9
41.8
79
29
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.19
1.7
9.0
0.26
2.5
9.6
0.34
3.3
9.8
0.46
4.4
9.5
0.70
6.9
9.9
1.0
10
10.1
1.6
15
9.6
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1305
Schutzart ................................................................................................................ IP23............................................................................................................... Enclosure
Erregerleistung ...................................................................................................... 850 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 150 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.11 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.43 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht ................................................................................................ 166 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge .................................................................................. 8.4 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 0..56 kW / 1.2 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
30
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1305
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
300
400
460
520
2800
3815
1.0
—
—
2310
3165
2.0
—
—
2005
2765
3.0
3220
—
1710
2370
4.0
2765
—
1315
1840
5.0
2160
2480
1060
1505
6.0
1775
2040
795
7.0
1150
1368
1580
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
4200
4200
—
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
30.2
115
85
39
109
87
—
—
—
—
—
—
—
4200
26.9
104
83
4200
36.2
102
86
—
—
—
—
—
—
—
—
4000
23
90
82
3600
31.6
90
85
3600
36
88
87
—
—
—
—
3700
19
76
80
3350
26
75
84
3350
30.3
75
85
—
—
—
—
2800
15.5
64.5
76
2725
21.7
64.5
81
2725
25.2
64
83
2725
28.7
63.5
84
2400
12.8
55
73
2300
17.8
54
79
2300
20.8
53.5
81
2300
23.7
53
83
2000
9.3
43
67
1900
13.5
43
74
1900
16
43
77
1900
18.1
42
80
31
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.21
2.1
9.9
0.29
2.9
10.1
0.38
3.9
10.3
0.52
5.2
10.1
0.80
8.2
10.3
1.1
12
10.9
1.8
18.0
10.3
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1307
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 1100 W ..................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 150 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.12 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.48 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht .................................................................................................179 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge .................................................................................. 8.4 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 0.56 kW / 1.2 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
32
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1307
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
300
400
460
520
2060
3095
1.0
3595
—
1810
2500
2.0
2910
3320
1550
2150
3.0
2510
2865
1325
1850
4.0
2185
2500
1010
1435
5.0
1685
1940
810
1165
6.0
1375
1590
600
7.0
880
1045
1215
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4200
29.9
115
84
4200
39.9
112
86
4200
45.1
109
87
—
—
—
—
4200
26.5
104
82
3750
35.5
101
85
3750
40.9
100
86
3750
45.8
98
87
3500
22.6
90
80
3300
30.6
88
84
3300
35.7
88
85
3300
39.9
86
87
3200
18.6
76
78
3050
25.7
75
82
3050
29.7
74
84
3050
33.5
73
85
2500
15
64.5
73
2400
21.1
64
79
2400
24.7
63.5
81
2400
28.2
63
83
2050
12.3
55
70
2000
17.4
54
76
2000
20.6
54
79
2000
23.3
53
81
1600
8.9
43
63
1600
13.1
43
71
1600
15.6
43
74
1600
18.1
43
77
33
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.24
2.5
10.3
0.33
3.5
10.6
0.43
4.8
11.1
0.59
6.3
10.7
0.90
9.9
11.0
1.2
14
11.4
2.0
22.0
11.0
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1309
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 1050 W ..................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 150 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.13 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.52 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht .................................................................................................191 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge .................................................................................. 8.4 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 0.56 kW / 1.2 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
34
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1309
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
300
400
460
520
2010
2770
1.0
3225
—
1595
2215
2.0
2590
2960
1365
1910
3.0
2240
2565
1175
1655
4.0
1945
2230
880
1260
5.0
1490
1725
705
1025
6.0
1215
1410
—
7.0
760
915
1070
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4200
32.7
128
82
3900
44
125
86
3900
50
122
87
—
—
—
—
3350
28.4
114
80
3150
39.4
114
84
3150
45.2
112
86
3150
50.8
110
87
2900
24.1
99
78
2775
33.4
98
83
2775
38.7
97
84
2775
43.5
95
86
2650
19.5
82
76
2575
27.5
82
81
2575
31.9
81
83
2575
36.6
81
84
2100
15.4
69
71
2050
22.1
69
77
2050
26.2
69
79
2025
30.2
69
81
1800
12.4
58
67
1700
18.1
58
74
1700
21.5
58
77
1700
24.5
57
80
—
—
—
—
1400
13.4
46
68
1400
16.1
46
72
1400
18.8
46
75
35
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.27
2.8
10.5
0.36
4.0
11.1
0.47
5.4
11.4
0.64
7.1
11.1
0.99
11.2
11.3
1.33
16
12.0
2.2
25.0
11.6
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1311
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 1350 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 150 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.15 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.61 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht .................................................................................................215 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge .................................................................................. 8.4 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 0.56 kW / 1.2 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
36
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1311
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
300
400
460
520
1515
2110
1.0
2420
2770
1215
1700
2.0
1985
2290
1030
1450
3.0
1675
1925
870
1240
4.0
1460
1690
655
945
5.0
1125
1300
535
775
6.0
920
1070
—
7.0
580
690
800
Feldsteuerg
Field
Control
U/min
RPM
Ankerkreis / Armature
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
3600
31.5
126
80
3325
43.6
126
84
3400
49.7
123
85
3400
55.9
121
86
3025
26.1
106
79
Wirkungsgrad
Efficiency
%
2850
36.3
106
83
2850
42.4
106
84
2800
48.5
106
85
2500
22.8
96
75
2400
31.8
95
80
2400
36.9
94
82
2400
41.9
93
84
2300
18.6
81
72
2200
26.4
81
78
2200
31.2
81
80
2150
36.2
82
82
1825
14.4
66.5
67
1725
21.1
68
74
1725
24.9
67.5
77
1725
28.8
67.5
79
1625
11.2
52.5
65
1525
16.6
54
72
1525
19.7
54
75
1525
22.9
54
77
—
—
—
—
1275
12.1
42
67
1250
14.7
43
69
1225
17.5
44
72
37
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.32
3.6
11.2
0.42
5.0
11.9
0.56
6.9
12.3
0.76
8.9
11.7
1.17
14
12.0
1.53
20
13.1
2.50
31.0
12.4
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1606
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 1200 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................280 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.26 kg–m2.............................................................................................. Moment of Inertia
Läuferschwungmoment GD2................................................................................ 1.0 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht .................................................................................................274 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ...................................................................................12 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 0.56 kW / 1.2 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
38
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1606
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
3255
3750
1.0
—
—
2925
3385
2.0
—
—
2625
3035
3.0
3445
—
2055
2390
4.0
2725
3170
1630
1905
5.0
2180
2540
1355
1590
6.0
1820
2125
1160
1360
7.0
1565
1830
1010
8.0
1190
1370
1610
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4250
70.8
194
89
4250
75.1
178
90
—
—
—
—
—
—
—
—
3525
70.6
193
89
3525
79.1
187
90
—
—
—
—
—
—
—
—
3450
65.4
180
89
3500
73.3
174
89
3500
79.9
167
90
—
—
—
—
3450
53.7
150
87
3450
62.4
150
88
3450
70.6
149
89
3250
80.4
146
90
3075
41.5
119
84
3075
47.9
118
86
3050
54.8
118
87
2950
62.8
116
88
2525
35.8
104
83
2525
41
102
85
2500
46.9
102
86
2475
54.9
102
87
2300
31.2
92
82
2300
36.6
92
84
2300
41.7
91.5
85
2250
47.5
89
86
2075
27
81.5
79
2075
31.7
81.5
82
2075
36.5
81.5
83
2025
42
80
85
39
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.087
1.44
16.5
0.094
1.58
16.8
0.122
2.07
17.0
0.19
3.3
17.2
0.32
4.74
14.8
0.42
6.48
15.3
0.54
8.5
15.6
0.72
10.7
14.8
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1608
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 1500 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................280 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.32 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2................................................................................ 1.3 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht .................................................................................................313 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ...................................................................................11 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 0.56 kW / 1.2 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
40
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1608
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
2360
2735
1.0
3105
—
2120
2460
2.0
—
—
1900
2205
3.0
2505
—
1480
1725
4.0
1970
2295
1165
1365
5.0
1565
1830
965
1135
6.0
1305
1530
830
975
7.0
1125
1320
710
8.0
845
975
1150
Feldsteuerg
Field
Control
U/min
RPM
Ankerkreis / Armature
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
3650
71.2
196
88
3650
80.8
192
89
3650
87.9
184
90
—
—
—
—
2775
71.2
196
88
2675
80
190
89
—
—
—
—
—
—
—
—
2750
64.7
180
87
2800
74.3
178
88
2725
82.8
174
89
—
—
—
—
2850
53.2
151
85
2850
60.3
147
87
2825
68.4
146
88
2750
79.2
145
89
2475
41.9
123
82
2475
49
123
84
2425
54.8
120
85
2300
63.1
118
87
2050
35.5
106
80
2050
41.3
105
82
2025
47.4
105
84
1925
55.1
104
86
1850
30.1
91.5
79
1800
35.5
91.5
81
1750
40.8
91.5
83
1675
47.7
91
84
1650
25.8
81
76
1625
30.5
81
78
1575
35.3
81
81
1500
41.4
80.5
83
41
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.11
1.91
17.7
0.12
2.08
17.9
0.15
2.73
18.2
0.24
4.35
18.4
0.39
6.26
16.1
0.52
8.56
16.5
0.67
11.3
16.9
0.89
14
15.8
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1610
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 1900 W ..................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................300 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.40 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2................................................................................ 1.6 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht ................................................................................................ 363 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ...................................................................................11 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 0.56 kW / 1.2 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 3400 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 3400 RPM
42
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1610
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
1720
2000
1.0
2275
2645
1550
1805
2.0
—
—
1380
1605
3.0
1840
—
1070
1250
4.0
1430
1670
860
1000
5.0
1150
1355
700
820
6.0
950
1120
595
705
7.0
815
965
510
8.0
610
710
835
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
3000
71.9
200
87
3050
81.4
195
88
3100
89.8
189
89
3075
99.3
180
90
2100
71.3
199
87
2000
80.9
194
88
—
—
—
—
—
—
—
—
2200
65.1
184
87
2100
74.6
181
87
2000
83.3
177
88
—
—
—
—
2250
51.4
149
83
2200
59.7
148
85
2150
66.6
144
86
2100
76.3
141
88
1900
40.6
123
79
1900
47.4
122
81
1800
54.2
121
83
1750
62.2
118
85
1600
33.4
103
77
1550
39.6
104
79
1500
45.4
103
81
1450
52.9
102
83
1400
28.5
90
75
1350
33.6
89.5
78
1300
39.4
91.5
79
1300
45.6
89.3
82
1250
24.2
79.5
71
1250
28.5
78
75
1200
33.3
78.5
78
1150
39.3
78.5
80
43
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.13
2.5
19.2
0.14
2.7
19.3
0.18
3.6
20.0
0.29
5.7
19.7
0.48
8.1
16.9
0.64
11
17.2
0.84
15
17.9
1.1
18
16.4
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1808
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 1800 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 375 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.47 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2................................................................................ 1.9 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht .................................................................................................424 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ...................................................................................15 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 1.12 kW / 2.6 A........................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4000 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4000 RPM
44
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1808
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
2335
2700
1.0
3060
—
2000
2320
2.0
2635
3050
1770
2055
3.0
2340
2715
1385
1615
4.0
1845
2145
1140
1330
5.0
1520
1775
915
1075
6.0
1235
1445
770
7.0
905
1045
1225
Feldsteuerg
Field
Control
U/min
RPM
Ankerkreis / Armature
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
3800
112
305
90
3800
125
295
91
3800
137
285
91
—
—
—
—
3800
98.5
270
89
3800
113
267
90
3800
124
258
91
3800
136
244
91
2800
86.2
240
88
2800
99.3
238
89
2800
111
233
90
2800
124
224
90
2475
69.6
196
86
2475
80.9
196
87
2475
91.4
194
88
2475
103
188
89
2450
60.8
174
85
2450
70.6
173
86
2450
79.4
170
88
2425
91
167
89
2100
48.6
144
82
2100
57
144
84
2100
65
143
85
2050
75.2
141
87
1800
42
126
80
1800
49.1
125
82
1800
56.4
125
84
1750
65.7
124
86
45
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.06
1.1
18.5
0.08
1.36
16.8
0.12
2.15
18.5
0.17
2.9
17.2
0.23
4.2
18.3
0.36
6.0
16.6
0.45
8.2
18.2
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1810
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 2300 W ..................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 375 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.63 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2................................................................................ 2.5 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht ................................................................................................ 508 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ...................................................................................15 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 1.12 kW / 2.6 A........................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 3400 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 3400 RPM
46
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK1810
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
1645
1910
1.0
2165
2505
1390
1625
2.0
1850
2120
1185
1385
3.0
1580
1840
1030
1200
4.0
1375
1605
810
950
5.0
1085
1270
645
760
6.0
875
1030
540
7.0
645
740
875
Feldsteuerg
Field
Control
U/min
RPM
Ankerkreis / Armature
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
3400
114
315
89
3300
131
310
90
3250
143
298
90
3200
156
280
91
3000
97
270
88
3000
113
271
89
3000
127
267
89
3000
143
258
90
2200
83.7
238
85
2200
96.4
235
87
2200
109.6
234
88
2175
125
229
89
1950
72.4
207
85
1950
84.4
207
86
1925
96.7
208
87
1900
111
204
88
1650
57.7
169
83
1600
66.9
167
84
1550
76.3
166
86
1500
88.6
165
87
1350
45.2
138
79
1350
53.8
140
81
1300
61.3
138
83
1250
71.6
137
85
1200
38.2
118
77
1150
45.4
119
80
1100
52.3
119
82
1050
61.1
118
84
47
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.077
1.48
19.3
0.11
1.9
17.8
0.16
3
19.4
0.19
3.98
20.6
0.29
5.64
19.7
0.46
8.27
18.1
0.57
11.2
19.5
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2008 and LGK2008
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 1900 W .................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................500 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................... 1.1 kg–m2................................................................................................ Moment of Inertia
Läuferschwungmoment GD2................................................................................ 4.3 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht ................................................................................................ 665 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ...................................................................................20 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 1.12 kW / 2.6 A........................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 3600 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 3600 RPM
48
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2008 and LGK2008
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
1795
1.0
2075
2350
LGK2008
—
1380
2.0
1600
1820
GK2008
2100
1085
3.0
1265
1435
GK2008
1670
970
4.0
1130
1290
GK2008
1500
810
5.0
950
1085
GK2008
1265
600
6.0
GK2008
710
815
955
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
2600
155
420
91
2600
177
415
92
2600
197
405
92
Wirkungsgrad
Efficiency
%
—
—
—
—
2875
123
338
89
2875
141
335
90
2875
159
330
91
2850
177
316
92
1700
99.3
278
87
1700
115
278
89
1700
128
270
90
1700
147
266
91
1825
88.3
250
86
1800
103
260
88
1800
116
247
89
1750
133
243
90
1725
74.1
214
84
1725
86.7
214
86
1725
97.6
210
87
1725
113
208
89
1550
58.9
177
80
1550
68.7
175
83
1525
78.6
174
84
1500
91.3
172
86
Note: Armature 1 requires longer opposite drive end bracket (LGK2008 frame)
49
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.044
1.28
29.9
0.075
1.89
25.1
0.12
3.29
27.9
0.15
3.9
26.0
0.21
6.1
29.3
0.33
9.1
27.6
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2010 and LGK2010
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 2200 W ..................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................500 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................... 1.2 kg–m2................................................................................................ Moment of Inertia
Läuferschwungmoment GD2................................................................................ 4.9 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht .................................................................................................717 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ...................................................................................20 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 1.12 kW / 2.6 A........................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 3400 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 3400 RPM
50
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2010 and LGK2010
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
1700
1.0
1965
2225
LGK2010
—
1510
2.0
1750
1985
LGK2010
2295
1155
3.0
1345
1530
GK2010
1775
920
4.0
1075
1225
GK2010
1425
820
5.0
960
1095
GK2010
1255
685
6.0
805
920
GK2010
1080
540
7.0
GK2010
635
735
865
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
2450
169
460
90
2500
192
451
91
2500
213
440
92
—
—
—
—
2325
157
427
90
2325
181
425
91
2350
202
417
92
2325
226
403
92
2550
122
338
88
2550
141
338
89
2500
162
339
90
2500
180
324
91
1525
97.3
275
86
1525
114
277
88
1525
129
274
89
1475
148
270
90
1600
87.2
250
85
1550
102
252
86
1525
116
250
88
1475
134
247
89
1550
72.1
211
83
1500
85.6
215
84
1500
98.5
216
86
1500
114
213
87
1350
57.3
175
79
1300
68.1
177
81
1300
77.8
175
83
1250
91.9
176
85
Note: Armatures 1, 2 require longer opposite drive end bracket (LGK2010 frame)
51
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.042
1.22
28.9
0.050
1.48
29.8
0.086
2.20
25.6
0.13
3.8
28.3
0.17
4.5
26.3
0.24
7.1
29.0
0.37
10.6
28.6
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2208 and LGK2208
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 3200 W ..................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................500 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................... 2.3 kg–m2................................................................................................ Moment of Inertia
Läuferschwungmoment GD2................................................................................ 9.1 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht ................................................................................................ 907 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ...................................................................................27 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 1.87 kW / 3.8 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 3200 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 3200 RPM
52
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2208 and LGK2208
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
1580
1.0
1825
—
LGK2208
—
1440
2.0
1670
—
LGK2208
—
1290
3.0
1490
1695
LGK2208
—
1175
4.0
1365
1555
LGK2208
1800
1030
5.0
1195
1360
LGK2208
1580
880
6.0
1025
1170
GK2208
1365
600
7.0
705
805
GK2208
945
480
8.0
GK2208
565
650
765
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
1850
219
592
91
1850
254
592
92
—
—
—
—
—
—
—
—
1750
214
580
90
1750
246
575
91
—
—
—
—
—
—
—
—
1775
194
528
90
1775
222
522
91
1775
249
515
92
—
—
—
—
1875
175
480
89
1875
201
475
90
1875
226
470
91
1875
255
455
92
1700
157
434
88
1700
181
430
89
1700
204
425
90
1700
232
416
91
1875
138
388
87
1875
160
385
88
1875
180
380
89
1875
206
372
90
1125
95.9
280
83
1125
112
280
85
1125
127
277
86
1100
148
274
88
1175
76.1
229
80
1175
89.3
228
82
1175
102
227
84
1175
119
225
86
Note: Armatures 1-5 require longer opposite drive end bracket (LGK2208 frame)
53
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.029
0.75
26.0
0.034
0.92
27.2
0.041
1.1
27.7
0.051
1.4
26.5
0.064
1.8
27.5
0.086
2.2
25.2
0.17
4.3
25.1
0.25
7.0
27.4
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2210 and LGK2210
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 3400 W ..................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................500 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................... 2.5 kg–m2................................................................................................ Moment of Inertia
Läuferschwungmoment GD2................................................................................. 10 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht ................................................................................................ 957 kg ....................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ...................................................................................27 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 1.87 kW / 3.8 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.....................................................................................................................................maximal zulässige Drehzahl n = 2875 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 2875 RPM
54
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK GK2210 and LGK2210
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
1405
1.0
1625
—
LGK2210
—
1285
2.0
1490
—
LGK2210
—
1150
3.0
1335
1515
LGK2210
—
1040
4.0
1210
1375
LGK2210
1595
900
5.0
1050
1195
LGK2210
1390
780
6.0
915
1045
GK2210
1215
535
7.0
625
720
GK2210
845
420
8.0
GK2210
495
570
670
Feldsteuerg
Field
Control
U/min
RPM
Ankerkreis / Armature
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
1750
212
574
91
1750
246
574
92
—
—
—
—
—
—
—
—
1600
215
585
90
1650
249
585
91
—
—
—
—
—
—
—
—
1600
195
535
89
1600
226
533
90
1600
251
520
91
—
—
—
—
1700
176
485
88
1700
204
485
90
1700
228
475
91
1700
257
460
91
1525
158
440
87
1525
182
437
89
1525
205
431
90
1525
234
422
91
1700
138
390
86
1700
161
390
87
1700
180
383
89
1700
207
376
90
1000
95.3
282
82
1000
111
280
84
1000
127
278
85
1000
148
275
87
1075
74.9
229
78
1075
88.4
229
81
1075
100
225
83
1075
116
222
85
Note: Armatures 1-5 require longer opposite drive end bracket (LGK2210 frame)
55
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.031
0.836
26.6
0.037
1.03
27.8
0.045
1.3
28.4
0.056
1.5
26.8
0.070
2.0
28.1
0.094
2.4
25.7
0.19
4.8
25.7
0.28
7.8
28.1
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2508
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 3000 W ..................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................650 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................... 3.4 kg–m2................................................................................................ Moment of Inertia
Läuferschwungmoment GD2................................................................................. 14 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht ................................................................................................1270 kg ...................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ...................................................................................34 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 1.87 kW / 3.8 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 3000 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 3000 RPM
56
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2508
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
1435
1660
1.0
—
—
1140
1325
2.0
1515
1760
1040
1205
3.0
1375
1605
900
1045
4.0
1190
1385
800
935
5.0
1065
1240
655
765
6.0
875
1020
595
7.0
695
795
930
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
1950
250
674
91
1950
292
680
92
—
—
—
—
—
—
—
—
2000
198
539
90
2000
230
540
91
2000
259
535
92
1900
295
524
92
2150
176
483
89
2150
205
485
90
2150
232
481
91
2125
265
472
92
2100
156
430
89
2100
181
431
90
2100
205
428
91
2100
236
422
92
2300
140
393
87
2300
164
395
89
2300
186
392
90
2275
214
388
91
2100
114.7
327
86
2100
134
327
87
2100
153
326
88
2075
177
324
90
1350
101.6
291
85
1350
119
292
87
1350
136
291
88
1350
157
289
89
57
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.028
0.82
29.6
0.042
1.3
31.0
0.052
1.6
30.8
0.065
2.0
31.0
0.086
2.4
27.9
0.12
3.3
26.8
0.14
3.9
27.1
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2510
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 3400 W ..................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................750 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................... 4.2 kg–m2................................................................................................ Moment of Inertia
Läuferschwungmoment GD2................................................................................. 17 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht ............................................................................................... 1480 kg ...................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ...................................................................................34 m3/min ............................................................................................ Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 1.87 kW / 3.8 A.......................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 2350 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 2350 RPM
58
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2510
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
1415
1640
1.0
—
—
1215
1405
2.0
—
—
1010
1170
3.0
1330
—
805
940
4.0
1070
1240
735
855
5.0
975
1135
635
735
6.0
840
980
565
660
7.0
750
880
460
535
8.0
615
720
415
9.0
485
560
655
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
1800
321
860
92
1800
371
860
93
—
—
—
—
—
—
—
—
1550
289
778
91
1550
335
778
92
—
—
—
—
—
—
—
—
1575
250
680
90
1575
290
680
91
1550
327
675
92
—
—
—
—
1625
196
540
89
1625
228
540
90
1625
257
536
91
1625
296
530
92
1750
174
483
88
1750
202
483
89
1750
229
481
90
1750
264
475
91
1750
153
428
87
1750
178
428
88
1750
202
426
89
1700
234
423
91
1850
135
385
86
1850
158
385
87
1850
181
385
88
1850
211
385
90
1700
111
325
83
1700
131
325
85
1700
150
325
87
1700
174
322
88
1050
98
288
82
1050
115
288
84
1050
132
288
86
1050
155
288
87
59
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.018
0.73
39.7
0.023
0.75
32.9
0.034
1.1
31.9
0.052
1.7
33.4
0.064
2.1
32.0
0.079
2.7
34.3
0.10
3.2
30.6
0.15
4.3
29.0
0.18
5.2
29.1
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2808
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 3178 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................561 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................... 6.0 kg–m2................................................................................................ Moment of Inertia
Läuferschwungmoment GD2................................................................................. 24 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht ............................................................................................... 1600 kg ...................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ................................................................................. 55.5 m3/min ........................................................................................... Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 3.13 kW / 6.0 A........................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 2700 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 2700 RPM
60
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2808
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
1.0
Curve
Number
400
2802.116400
1250
2808.116460
460
520
1500
2808.116520
1640
—
2808.138400
2.0
—
1050
2808.138460
1210
2808.138520
1380
—
2808.162400
3.0
—
870
2808.162460
1000
2808.162520
1140
2808.162600
2808.184400
4.0
1330
760
2808.184460
880
2808.184520
1000
2808.184600
2808.216400
5.0
1160
630
2808.216460
730
2808.216520
840
2808.216600
2808.138400
6.0
980
490
2808.135460
580
2808.135520
660
—
2808.171400
7.0
—
390
2808.171460
450
2808.171520
520
2808.171600
—
8.0
2808.215460
2808.215520
2808.215600
600
600
—
350
410
470
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
1450
332
895
91.7
—
368
851
92.4
—
404
830
92.9
—
—
—
—
1375
296
805
91.0
1425
327
764
91.9
1425
370
761
92.4
—
—
—
—
1200
244
667
90.1
1200
280
659
91.1
1200
320
661
91.8
—
360
640
92.5
1350
207
572
88.9
1350
244
581
89.9
1350
280
585
90.7
1350
325
583
91.6
1300
177
494
87.7
1300
208
500
89.0
1300
239
502
89.9
1300
276
497
90.9
900
140
400
85.8
900
161
392
87.4
900
187
399
88.6
—
—
—
—
875
104
295
85.0
875
125
304
86.5
875
140
299
88.0
875
168
308
89.3
—
—
—
—
950
94
241
81.9
950
109
244
83.5
950
130
248
87.9
61
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.0187
0.7111
38.0
0.0245
1.07
43.7
0.034
1.43
41.9
0.047
1.8
38.3
0.062
2.5
39.8
0.0936
3.92
41.9
0.1267
4.722
37.3
0.234
9.26
39.6
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2810
Schutzart ................................................................................................................ IP23 .............................................................................................................. Enclosure
Erregerleistung ..................................................................................................... 3800 W ..................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 570 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................... 7.5 kg–m2................................................................................................ Moment of Inertia
Läuferschwungmoment GD2................................................................................. 30 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht ............................................................................................... 1800 kg ...................................................................................................... Motor Weight
Fremdlüfter: Fördermenge ................................................................................. 55.5 m3/min ........................................................................................... Blower: Air Volume
Motordaten für 380 V, 50 Hz .......................................................................... 3.13 kW / 6.0 A........................................................................... Motor data for 380 V, 50 Hz
Leistungsreduktion bei Feldschwächung.....................................................................................................................................maximal zulässige Drehzahl n = 2400 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 2400 RPM
62
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
fremdgekühlt
Laminated DC – Motor with Shunt Field
force – ventilated
TYPE : GK2810
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
1.0
Curve
Number
400
2810.116400
995
2810.116460
460
520
1150
—
—
—
2810.138400
2.0
—
835
2810.138460
965
R3204A
1100
—
2810.162400
3.0
—
705
2810.162460
820
2810.162520
935
2810.162600
2810.184400
4.0
1085
610
2810.184460
710
2810.184520
810
2810.184600
2810.216400
5.0
940
510
2810.216460
595
2810.216520
680
2810.216600
2810.135400
6.0
790
400
2810.135460
470
2810.135520
540
—
2810.171400
7.0
2810.171460
2810.171520
2810.171600
600
—
310
365
420
490
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
1250
343
935
90.8
—
396
922
91.7
—
—
—
—
—
­—
—
—
1150
284
779
90.1
1150
336
792
91.1
1150
393
817
91.7
—
—
—
—
1000
245
677
89.2
1000
284
675
90.5
1000
323
672
91.3
—
376
674
92.1
1050
215
604
87.3
1050
252
609
88.6
1050
284
601
89.7
1050
334
607
90.7
1050
178
506
86.5
1050
207
502
88.0
1050
237
505
89.1
1050
276
503
90.2
750
140
410
83.2
750
165
413
85.0
750
189
412
86.5
—
—
—
—
750
102
302
81.9
700
131
338
82.1
700
139
306
85.2
700
162
303
87.0
63
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.023
0.84
36.5
0.032
1.4
43.7
0.041
1.7
41.5
0.057
2.2
38.6
0.073
3.0
41.1
0.119
4.7
39.5
0.171
7.1
41.5
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1104
Schutzart ................................................................................................................ IP44 .............................................................................................................. Enclosure
Erregerleistung ...................................................................................................... 150 W ....................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 175 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................. 0.029 kg–m2............................................................................................. Moment of Inertia
Läuferschwungmoment GD2.............................................................................. 0.115 kg–m2.......................................................................................... Flywheel Effect GD2
Maschinengewicht ................................................................................................. 84 kg ........................................................................................................ Motor Weight
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 5000 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 5000 RPM
64
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1104
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
2790
3225
1.0
—
—
2245
2610
2.0
—
—
1780
2080
3.0
2810
—
4.0
1435
4.1
1685
4.2
2300
4.3
5.0
2665
1160
5.1
1365
5.2
1870
5.3
6.0
6.1
6.2
6.3
2170
975
1160
1600
1870
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
5000
3.55
15.5
85
5000
3.69
13.9
85
—
—
—
—
—
—
—
—
5000
3.13
13.8
84
5000
3.43
13
85
—
—
—
—
—
—
—
—
5000
2.56
11.4
82
5000
2.9
11
84
5000
3.4
9.6
85
—
—
—
—
5000
2.11
9.6
80
5000
2.42
9.4
81
4800
3.05
8.7
84
5000
3.33
8.2
85
4100
1.79
8.3
78
4100
2.08
8.2
80
3900
2.71
7.8
83
4000
3.02
7.5
84
3500
1.48
7.1
74
3500
1.71
7
76
3400
2.29
6.7
81
3400
2.63
6.6
82
65
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.80
9.0
11.3
1.26
14
11.1
1.8
19
10.6
2.7
28
10.4
3.9
42
10.8
5.6
56
10.0
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1106
Schutzart ................................................................................................................ IP44 .............................................................................................................. Enclosure
Erregerleistung ...................................................................................................... 150 W ....................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 150 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................. 0.033 kg–m2............................................................................................. Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.13 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht ................................................................................................. 93 kg ........................................................................................................ Motor Weight
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 5000 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 5000 RPM
66
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1106
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
2595
2985
1.0
—
—
2195
2550
2.0
—
—
1665
1945
3.0
2625
—
4.0
1420
4.1
1660
4.2
2255
4.3
5.0
2610
1140
5.1
1340
5.2
1835
5.3
6.0
2135
910
6.1
1075
6.2
1490
6.3
7.0
7.1
7.2
7.3
1735
—
885
1235
1445
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
5000
4.13
17.9
86
5000
4.3
16.1
86
—
—
—
—
—
—
—
—
5000
3.88
16.9
85
5000
4.25
15.9
86
—
—
—
—
—
—
—
—
5000
3.08
13.6
83
5000
3.46
13.1
84
5000
4.11
11.5
86
—
—
—
—
5000
2.63
11.8
81
5000
3.02
11.6
83
4800
3.8
10.7
85
4800
4.11
10
86
4250
2.14
9.9
78
4250
2.46
9.7
80
4050
3.23
9.2
84
4050
3.62
8.9
85
3450
1.79
8.5
76
3450
2.09
8.4
78
3300
2.79
8.1
82
3300
3.18
7.9
83
—
—
—
—
3000
1.72
7.1
75
2900
2.33
6.9
80
2900
2.69
6.8
82
67
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.70
8.2
11.7
0.93
11
11.8
1.4
17
12.1
2.1
24
11.4
3.2
34
10.6
4.5
51
11.3
6.5
71
10.9
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1108
Schutzart ................................................................................................................ IP44 .............................................................................................................. Enclosure
Erregerleistung ...................................................................................................... 175 W ....................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ......................................................................... 225 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................. 0.040 kg–m2............................................................................................. Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.16 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht .................................................................................................111 kg ....................................................................................................... Motor Weight
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 5000 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 5000 RPM
68
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1108
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
2025
2340
1.0
—
—
1710
1990
2.0
2655
3055
3.0
1360
3.1
1590
3.2
2145
3.3
4.0
2480
1095
4.1
1290
4.2
1765
4.3
5.0
2050
875
5.1
1035
5.2
1430
5.3
6.0
1665
—
6.1
825
6.2
1155
6.3
7.0
7.1
7.2
7.3
1350
—
—
950
1115
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
5000
4.44
19.3
86
5000
4.85
18.1
87
—
—
—
—
—
—
—
—
5000
4.04
17.7
85
5000
4.53
17
86
5000
5.34
14.8
87
5000
5.4
13
88
4800
3.3
14.8
83
4800
3.79
14.5
84
4700
4.75
13.3
87
4800
5.16
12.5
87
4150
2.69
12.3
80
4150
3.11
12.1
82
4000
4.03
11.4
85
4100
4.52
11
86
3500
2.16
10.2
76
3500
2.52
10.1
79
3400
3.36
9.7
83
3400
3.8
9.4
84
—
—
—
—
2850
2.08
8.6
76
2750
2.85
8.4
81
2750
3.29
8.3
82
—
—
—
—
—
—
—
—
2400
2.34
7.1
78
2350
2.72
7
80
69
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.83
10
12.0
1.1
15
13.6
1.7
22
12.9
2.4
30
12.5
3.7
44
11.9
5.3
66
12.5
7.7
91
11.8
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1110
Schutzart ................................................................................................................ IP44 .............................................................................................................. Enclosure
Erregerleistung ...................................................................................................... 150 W ....................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................300 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................. 0.043 kg–m2............................................................................................. Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.17 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht .................................................................................................120 kg ....................................................................................................... Motor Weight
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
70
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1110
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
2735
3155
1.0
—
—
1870
2175
2.0
2885
—
1575
1835
3.0
2475
2825
4.0
1190
4.1
1385
4.2
1890
4.3
5.0
2190
970
5.1
1145
5.2
1570
5.3
6.0
1825
­—
6.1
945
6.2
1310
6.3
7.0
7.1
7.2
7.3
1530
—
­—
1065
1240
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4500
5.74
24.6
88
4500
6
22.2
88
—
—
—
—
—
—
—
—
4500
4.55
19.9
85
4500
5.08
19
87
4500
5.73
15.9
88
—
—
—
—
4500
4.08
18.1
84
4500
4.66
17.6
86
4500
5.65
15.7
88
4500
6
14.4
88
4500
3.26
14.7
82
4500
3.75
14.4
83
4350
4.78
13.4
86
4250
5.25
12.7
87
3900
2.71
12.5
79
3850
3.14
12.3
81
3650
4.11
11.7
85
3550
4.62
11.3
86
—
—
—
—
3225
2.52
10.2
78
3100
3.4
9.9
82
3050
3.9
9.7
84
—
—
—
—
—
—
—
—
2500
2.89
8.6
80
2450
3.31
8.4
82
71
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.45
6.1
13.6
0.89
12
13.5
1.2
16
13.3
1.8
25
13.9
2.6
35
13.5
4.1
49
12.0
5.8
73
12.6
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1303
Schutzart ................................................................................................................ IP44 .............................................................................................................. Enclosure
Erregerleistung ...................................................................................................... 150 W ..................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 150 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I .................................................................................. 0.098 kg–m2............................................................................................. Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.39 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht ................................................................................................ 154 kg ....................................................................................................... Motor Weight
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
72
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1303
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
2495
2915
1.0
—
—
2135
2490
2.0
—
—
1780
2100
3.0
2860
—
1535
1795
4.0
2450
—
1240
1470
5.0
2010
2335
6.0
975
6.1
1150
6.2
1595
6.3
7.0
1860
835
7.1
990
7.2
1365
7.3
8.0
8.1
8.2
8.3
1610
—
790
1105
1290
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4500
4.24
19.1
83
4500
4.6
17.9
84
—
—
—
—
—
—
—
—
4500
4.04
18.2
83
4500
4.47
17.3
84
—
—
—
—
—
—
—
—
4500
3.39
15.5
82
4500
3.87
15.2
83
4500
4.49
13
84
—
—
—
—
4500
3.21
14.7
81
4500
3.64
14.3
82
4500
4.31
12.5
83
—
—
—
—
4500
2.79
12.9
79
4500
3.22
12.7
81
4500
4.0
11.6
83
4500
4.13
10.4
83
4500
2.23
10.6
76
4500
2.6
10.5
78
4150
3.4
10
81
3550
3.82
9.7
82
4500
1.94
9.4
74
4200
2.29
9.4
77
3600
3.03
9
80
3050
3.49
8.9
82
—
—
—
—
3400
1.81
7.7
73
3050
2.46
7.5
78
2600
2.84
7.4
80
73
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.86
8.5
9.9
0.98
10
10.2
1.4
14
10.0
1.6
16
10.0
2.0
20
10.0
3.1
31
10.0
4.0
41
10.3
6.0
60
10.0
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1305
Schutzart ................................................................................................................ IP44 .............................................................................................................. Enclosure
Erregerleistung ...................................................................................................... 175 W ....................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 150 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.11 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.43 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht ................................................................................................ 166 kg ....................................................................................................... Motor Weight
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
74
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1305
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
2290
2670
1.0
—
—
2070
2415
2.0
—
—
1885
2205
3.0
2990
—
1585
1850
4.0
2545
2920
1345
1590
5.0
2170
2520
6.0
1165
6.1
1380
6.2
1885
6.3
7.0
2190
1015
7.1
1190
7.2
1645
7.3
8.0
1915
795
8.1
940
8.2
1305
8.3
9.0
9.1
9.2
9.3
1520
—
805
1115
1305
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4500
4.65
20.9
84
4500
5.2
20
85
—
—
—
—
—
—
—
—
4500
4.3
19.4
83
4500
4.85
18.8
84
—
—
—
—
—
—
—
—
4500
4.1
18.6
83
4500
4.7
18.2
84
4500
5.45
15.7
85
—
—
—
—
4500
3.75
17
82
4500
4.25
16.6
84
4500
5.25
15.1
85
4500
5.3
13.2
85
4500
3.3
15.2
81
4500
3.8
14.9
82
4500
4.75
13.7
84
4500
4.9
12.3
84
4500
3.1
14.3
80
4500
3.55
14
81
4500
4.5
13
83
4450
4.7
11.8
84
4500
2.7
12.8
77
4500
3.15
12.6
80
4300
4.1
12
83
3700
4.6
11.5
83
4350
2.19
10.5
75
4100
2.55
10.4
77
3450
3.4
10.1
81
2950
3.9
9.9
82
—
—
—
—
3550
2.25
9.3
76
3050
3
9
80
2600
3.45
8.9
81
75
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.81
8.5
10.5
0.97
10
10.3
1.10
12
10.9
1.3
14
10.8
1.6
16
10.0
1.8
19
10.6
2.3
24
10.4
3.5
37
10.6
4.5
48
10.7
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1307
Schutzart ................................................................................................................ IP44 .............................................................................................................. Enclosure
Erregerleistung ...................................................................................................... 200 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 180 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.12 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.48 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht .................................................................................................179 kg ....................................................................................................... Motor Weight
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
76
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1307
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
2390
2785
1.0
—
—
2105
2455
2.0
—
—
1875
2190
3.0
2970
—
1560
1820
4.0
2475
—
1310
1545
5.0
2100
2440
6.0
1095
6.1
1290
6.2
1780
6.3
7.0
2065
955
7.1
1125
7.2
1540
7.3
8.0
1805
830
8.1
975
8.2
1340
8.3
9.0
9.1
9.2
9.3
1575
—
765
1060
1240
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4500
5.7
25.2
85
4500
6.25
23.8
86
—
—
—
—
—
—
—
—
4500
5.2
23.1
85
4500
5.85
22.3
85
—
—
—
—
—
—
—
—
4500
4.7
21.1
84
4500
5.3
20.5
85
4500
6.1
17.5
85
—
—
—
—
4500
4.25
19.1
83
4500
4.85
18.7
84
4500
5.9
16.9
85
—
—
—
—
4500
3.95
17.9
82
4500
4.55
17.6
83
4500
5.65
16.2
85
4500
5.85
14.5
85
4500
3.3
15.2
80
4500
3.75
14.9
81
4300
4.9
14.2
84
3650
5.5
13.7
85
4500
3.1
14.3
79
4500
3.55
14.1
81
4050
4.65
13.4
83
3400
5.2
13
84
4400
2.7
12.8
77
4200
3.15
12.6
79
3550
4.15
12.1
82
3000
4.75
11.9
83
—
—
—
—
3400
2.5
10.3
76
2900
3.4
10.1
80
2450
3.9
9.9
—
77
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.57
6.5
11.4
0.72
8.3
11.5
0.92
10
10.9
1.1
12
10.9
1.3
15
11.5
1.8
20
11.1
2.0
23
11.5
2.6
29
11.2
4.0
45
11.3
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1309
Schutzart ................................................................................................................ IP44 .............................................................................................................. Enclosure
Erregerleistung ...................................................................................................... 225 W ..................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) .......................................................................... 180 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.13 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.52 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht .................................................................................................191 kg ....................................................................................................... Motor Weight
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
78
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1309
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
260
300
400
460
2235
2600
1.0
—
—
1965
2295
2.0
3145
—
1750
2045
3.0
2810
3260
4.0
1430
4.1
1695
4.2
2300
4.3
5.0
2705
1210
5.1
1420
5.2
1950
5.3
6.0
2265
1125
6.1
1330
6.2
1810
6.3
7.0
2100
880
7.1
1040
7.2
1425
7.3
8.0
8.1
8.2
8.3
1655
—
830
1155
1345
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4500
5.8
25.8
85
4500
6.5
24.9
86
—
—
—
—
—
—
—
—
4500
5.25
23.4
85
4500
5.9
22.8
85
4500
7
20
86
—
—
—
—
4500
4.7
21.2
83
4500
5.4
20.8
85
4500
6.75
19.3
86
4500
7
17.3
86
4500
4.25
19.2
83
4500
4.85
18.9
84
4500
6.25
17.8
85
4150
6.8
16.8
86
4500
4
18.1
82
4500
4.6
17.8
83
4250
5.9
16.9
85
3700
6.55
16.2
86
4500
3.9
17.7
82
4500
4.5
17.4
83
4400
5.75
16.4
85
3800
6.3
15.5
86
4500
3.1
14.5
78
4500
3.6
14.3
80
3950
4.75
13.7
83
3350
5.35
13.3
84
—
—
—
—
3750
3.05
12.4
78
3150
4.1
12
82
2650
4.7
11.8
83
79
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.62
7.4
11.9
0.79
9.4
11.9
1.0
11.6
11.6
1.2
14
11.7
1.4
17
12.1
1.4
17
12.1
2.0
22
11.0
2.8
33
11.8
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1311
Schutzart ................................................................................................................ IP44 .............................................................................................................. Enclosure
Erregerleistung ...................................................................................................... 250 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................200 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.15 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2............................................................................... 0.61 kg–m2........................................................................................... Flywheel Effect GD2
Maschinengewicht .................................................................................................215 kg ....................................................................................................... Motor Weight
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
80
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1311
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
300
400
460
520
1960
2655
1.0
—
—
1570
2155
2.0
2505
—
3.0
1295
3.1
1785
3,2
2070
3.3
4.0
2360
1000
4.1
1365
4.2
1585
4.3
5.0
1825
885
5.1
1150
5.2
1435
5.3
6.0
6.1
6.2
6.3
1640
—
930
1085
1240
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
4500
6.4
24.6
86
4500
8
22.5
87
—
—
—
—
—
—
—
—
4500
5.6
21.7
84
4500
7.2
20.3
86
4500
7.7
18.8
86
—
—
—
—
4500
5
19.6
83
4400
6.5
18.5
85
3750
7.2
17.7
86
3100
7.3
15.8
86
4250
4.3
16.9
82
3550
5.6
16.2
84
3000
6.3
15.7
85
2500
7
15.3
86
4250
3.5
14.3
79
3200
4.7
13.8
82
3150
5.4
13.6
84
2550
6
13.3
85
—
—
—
—
2550
4
12
81
2150
4.6
11.8
82
1800
5.2
11.6
84
81
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.75
9.0
12.0
0.94
12
12.8
1.2
15
12.5
1.6
21
13.1
2.4
28
11.7
3.3
42
12.7
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1606
Schutzart ................................................................................................................ IP44 .............................................................................................................. Enclosure
Erregerleistung ...................................................................................................... 400 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................250 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.26 kg–m2.............................................................................................. Moment of Inertia
Läuferschwungmoment GD2................................................................................ 1.0 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht .................................................................................................274 kg ....................................................................................................... Motor Weight
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
82
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1606
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
300
400
460
520
1785
2415
1.0
—
—
1365
1835
2.0
—
—
1115
1515
3.0
1760
—
945
1290
4.0
1500
1705
845
1150
5.0
1335
1520
6.0
6.1
6.2
6.3
700
955
1110
1270
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
3400
9.7
36.1
87
3400
10.5
29.3
88
—
—
—
—
—
—
—
—
3400
8.6
32.4
86
3400
9.9
27.5
87
—
—
—
—
—
—
—
—
3400
7.5
28.5
85
3400
9
25
86
3400
9.3
22.4
87
—
—
—
—
3400
6.9
26.2
84
3400
8.4
23.6
86
3400
8.9
21.7
87
3400
9
19.3
87
3400
6.2
23.9
82
3400
7.8
21.8
85
3400
8.4
20.4
86
3400
8.7
18.6
86
3400
5.1
20.2
80
3400
6.6
19
83
3400
7.4
18.2
85
3100
8
17.2
85
83
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.42
6.4
15.2
0.54
8.5
15.7
0.70
11
15.7
0.88
13
14.8
1.1
16
14.5
1.6
22
13.8
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1608
Schutzart ................................................................................................................ IP44 .............................................................................................................. Enclosure
Erregerleistung ...................................................................................................... 400 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................300 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.32 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2................................................................................ 1.3 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht .................................................................................................313 kg ....................................................................................................... Motor Weight
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 4500 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 4500 RPM
84
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1608
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
2645
—
1.0
—
—
2055
—
2.0
—
—
1530
1775
3.0
—
—
1190
1380
4.0
—
—
1035
1200
5.0
1365
—
6.0
6.1
6.2
6.3
925
1070
1220
1425
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
3400
13.5
37.2
89
—
—
—
—
—
—
—
—
—
—
—
—
3400
12.4
34.4
88
—
—
—
—
—
—
—
—
—
—
—
—
3400
11.4
31.6
88
3400
11.7
28.2
88
—
—
—
—
—
—
—
—
3400
10.2
28.4
87
3400
10.7
25.8
87
—
—
—
—
—
—
—
—
3400
9
25.1
85
3400
9.7
23.4
86
3400
10
21.3
86
—
—
—
—
3400
8
22.4
84
3400
9.2
22.3
85
3100
9.8
20.9
86
2550
10
18.4
86
85
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.28
4.4
15.9
0.39
6.1
15.6
0.52
8.5
16.5
0.66
10.5
15.9
0.87
14
16.2
1.1
18
16.4
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1610
Schutzart ................................................................................................................ IP44 .............................................................................................................. Enclosure
Erregerleistung ...................................................................................................... 500 W ...................................................................................................... Exciter Rating
Erregerzeitkonstante (ungesättigt) ..........................................................................350 ms ....................................................................... Exciter field constant (unsaturated)
Läuferträgheitsmoment I ................................................................................... 0.40 kg–m2............................................................................................... Moment of Inertia
Läuferschwungmoment GD2................................................................................ 1.6 kg–m2............................................................................................ Flywheel Effect GD2
Maschinengewicht ................................................................................................ 363 kg ....................................................................................................... Motor Weight
Leistungsreduktion bei Feldschwächung.................................................................................................................................... maximal zulässige Drehzahl n = 3400 U / min
Reduction of listed rating at Field Weakening...........................................................................................................................................maximum safe speed n = 3400 RPM
86
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Rating Sheets and Derate Curves
VollgeblechterGleichstrom – Nebenschlußmotor
vollkommen geschlossen, unbelüftet
Laminated DC – Motor with Shunt Field
totally enclosed, non ventilated
TYPE : GK1610
Nenndrehzahl (U/min)
bei Ankerspannung
Base speed (RPM)
at armature voltage
Ankerkreis
Armature
400
460
520
600
1960
2270
1.0
—
—
1660
1925
2.0
—
—
3.0
1350
3.1
1565
—
—
4.0
1060
4.1
1240
4.2
1415
—
5.0
885
5.1
1025
5.2
1175
5.3
6.0
1365
765
6.1
890
6.2
1015
6.3
7.0
7.1
7.2
7.3
1180
690
795
905
1055
Ankerkreis / Armature
Feldsteuerg
Field
Control
U/min
RPM
Nennleistung
Nominal
Rating
kW
NennStrom
Nominal
Current
Amps
Wirkungsgrad
Efficiency
%
3400
15.7
43.1
89
3400
16.3
38.7
89
—
—
—
—
—
—
—
—
3400
14.7
40.2
89
3400
14.9
35.5
89
—
—
—
—
—
—
—
—
3400
13.1
36.3
88
3100
13.5
32.4
88
—
—
—
—
—
—
—
—
3400
10.7
29.7
86
3000
12
28.9
87
2500
12.6
26.6
87
—
—
—
—
3400
9
25.1
85
3100
10.5
25.3
86
2600
11.8
25
87
2100
12.3
22.5
87
3400
8
22.4
83
3300
9
21.8
85
2950
9.6
20.5
85
2300
10
18.5
86
3400
6.8
19.1
82
2950
8.2
19.9
84
2550
9.1
19.4
85
2000
9.8
18
85
87
Widerstand
Resistance
warm
Ohms
Inductivität
Inductance
mH
ZeitKonstante
TimeConstant
ms
0.34
5.7
17
0.34
5.7
17
0.48
8.2
17.1
0.64
11
17.3
0.82
15
18.4
1.0
18
17.3
1.3
23
17.7
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
Dimension Sheets
Enclosure
IP23
IP23
IP23
Method of
Cooling
IC17
IC06
IC06
Mounting
Foot
Foot
Foot
Accessories
None
Air Filter
Air Filter
and
Flange Mounted
Tacho
Frames
D/S Number
Page
GK1104-GK1110
616078-613
89
GK1303-GK1311
616008-613
90
GK1606-GK1610
616018-613
91
GK1808-UGK1810
616028-613
92
GK2008-UGK2010
616038-613
93
GK2208-UGK2210
616048-613
94
GK2508-UGK2510
616068-613
95
GK2806-GK2810
616493-601
96
GK1104-GK1110
616077-601
97
GK1303-GK1311
616007-601
98
GK1606-GK1610
616017-601
99
GK1808-UGK1810
616027-601
100
GK2008-ULGK2010
616037-601
101
GK2208-ULGK2210
616047-601
102
GK2508-UGK2510
616067-601
103
GK1104-GK1110
616077-602
104
GK1303-GK1311
616007-602
105
GK1606-GK1610
616017-602
106
GK1808-UGK1810
616027-602
107
GK2008-ULGK2010
616037-602
108
GK2208-ULGK2210
616047-602
109
GK2508-UGK2510
616067-602
110
GK2806-GK2810
616492-602
111
GK1303Y-GK1311Y
616007-603
112
GK1606Y-GK1610Y
616017-603
113
IP23
IC06
Flange
Air Filter
IP23
IC06
Flange
Air Filter and
Flange Mounted Tacho
GK1606Y-GK1610Y
616017-604
114
GK1808Y-GK1810Y
616027-604
115
GK1104-GK1110
616075-601
116
IP44
IC410
Foot
—­
GK1303-GK1311
616005-601
117
GK1606-GK1610
616015-601
118
GK2806-GK2810
616493-602
119
IP44
IC37
Foot
Flange Mounted
Tacho
88
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK1104-GK1110
TYPE
GK1104
GK1106
GK1108
GK1110
DIN
IEC
DIN
IEC
a
B
318
356
406
432
b
A
190
c
HA
6
e
BB
356
394
445
471
k
L
616
655
705
731
f
AB
229
k1
LC
688
726
776
802
g
AC
222
h
H
112
m1
BA
111
111
111
111
n
AA
35
m2
—
111
111
111
111
p
HD
269
x2
—
137
137
137
137
s
K
12
w1
C
70
w2
CA
160
160
160
160
d
D
38
38
38
38
ea
—
94
eb
—
108
ec
—
108
DRIVE END SHAFT
l
t
E
GA
80
41
80
41
80
41
80
41
ed
—
105
u
F
10
10
10
10
ee
—
99
ef
—
103
eh
—
121
ej
—
121
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
28
60
31
8
28
60
31
8
28
60
31
8
28
60
31
8
TYPE
GK1104
DIN
x1
IEC amps —
100 228
g1
—
361
CONDUIT
SIZE
Pg29,Pg16
TYPE
GK1106
DIN
x1
IEC amps —
100 266
g1
—
361
CONDUIT
SIZE
Pg29,Pg16
TYPE
GK1108
DIN
x1
IEC amps —
100 317
g1
—
361
CONDUIT
SIZE
Pg29,Pg16
TYPE
GK1110
DIN
x1
IEC amps —
100 343
g1
—
361
CONDUIT
SIZE
Pg29,Pg16
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(3) The Terminal Box Size Varies With Horsepower And Voltage.
(4) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(5) Tolerance Of Dimensions Are According To DIN.
(6) Opposite Drive End Shaft Supplied Only When Specified.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
89
bh
—
M6-1.0
WT.
KG.
84
93
111
120
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
DIN
TYPE
IEC
GK1303-GK1311
TYPE
GK1303
GK1305
GK1307
GK1309
GK1311
DIN
IEC
a
B
440
490
490
540
610
b
A
216
e
BB
572
603
645
676
746
DIN
x1
TYPE IEC amps —
GK1303
100 238
GK1303
200 225
TYPE
GK1309
GK1309
DIN
IEC
c
HA
11
g1
—
409
423
amps
100
200
f
AB
260
k
L
736
767
809
840
910
g
AC
275
k1
LC
858
890
931
963
1033
m1
BA
132
132
132
132
132
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
x1
—
343
330
h
H
132
n
AA
48
m2
-173
173
173
173
173
s
K
12
p
HD
329
329
329
329
329
w1
C
89
x2
-139
139
139
139
139
DIN
x1
TYPE IEC amps —
GK1305
100 270
GK1305
200 257
g1
—
409
423
CONDUIT
size
Pg29, Pg16
Pg36, Pg16
ea
—
127
w2
CA
109
91
132
114
114
eb
—
143
d
D
48
48
48
48
48
g1
—
409
423
ec
—
152
DRIVE END SHAFT
l
t
E
GA
110
51,5
110
51,5
110
51,5
110
51,5
110
51,5
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
TYPE
GK1311
GK1311
ed
—
127
DIN
IEC
ee
—
152
u
F
14
14
14
14
14
ef
—
130
eh
—
168
bh
—
M8-1.25
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
FA
GC
FA
42
110
45
12
42
110
45
12
42
110
45
12
42
110
45
12
42
110
45
12
DIN
TYPE IEC amps —
GK1307
100 311
GK1307
200 298
amps
100
200
ej
—
159
x1
—
412
400
g1
—
409
423
g1
—
409
423
CONDUIT
size
Pg29, Pg16
Pg36, Pg16
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
90
142
154
167
179
204
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm and m6 For Diameters Above.
(3) The Terminal Box Size Varies With Horsepower And Voltage.
(4) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(5) Tolerance Of Dimensions Are According To DIN.
(6) Opposite Drive End Shaft Supplied Only When Specified.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
WT.
KG.
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK1606-GK1610
TYPE
GK1606
GK1608
GK1610
DIN
IEC
a
B
550
630
720
DIN
b
c
f
g
h
n
s
w1
ea
eb
ec
ed
ee
ef
eh
ej
bh
IEC
A
254
HA
12
AB
314
AC
332
H
160
AA
55
K
15
C
108
-145
-165
-178
-149
-178
-157
-194
-181
-M8-1.25
x2
-172
172
172
w2
-128
126
142
d
D
60
60
60
e
BB
713
795
897
DIN
x1
TYPE IEC amps -GK1606
100 334
GK1606
200 322
GK1606
400 339
GK1606
800 288
k
L
913
996
1098
g1
-453
467
560
610
k1
LC
1036
1119
1220
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
(2)
(2)
m1
BA
154
154
154
m2
-203
203
203
p
HD
398
398
398
DIN
x1
TYPE IEC amps -GK1608
100 416
GK1608
200 404
GK1608
400 421
GK1608
800 370
g1
-453
467
560
610
DRIVE END SHAFT
l
t
E
GA
140
64
140
64
140
64
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
(2)
(2)
u
F
18
18
18
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
48
110
51,5
14
48
110
51,5
14
48
110
51,5
14
DIN
x1
TYPE IEC amps -GK1610
100 518
GK1610
200 506
GK1610
400 523
GK1610
800 472
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2)Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
(7)Tolerance for Flanges according to DIN 42948
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
91
g1
-453
467
560
610
WT.
KG.
263
302
352
CONDUIT
SIZE
Pg29, Pg16
Pg36 Pg16
(2)
(2)
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK1808-GK1810
TYPE
(U)GK1808
(U)GK1810
DIN
IEC
DIN
IEC
b
A
279
c
HA
17
a
B
710
790
e
BB
860
999
k
L
1068
1207
TYPE
(U)GK1808
(U)GK1808
(U)GK1808
(U)GK1808
f
AB
358
DIN
IEC amps
200
400
800
1600
g
AC
364
h
H
180
k1
LC
1190
1330
m1
BA
172
172
x1
-406
428
377
352
g1
-502
596
646
646
n
AA
75
m2
-234
234
p
HD
444
x2
-170
170
s
K
15
w2
-109
168
CONDUIT
SIZE
Pg36, Pg16
(2)
(2)
(2)
w1
C
121
d
D
70
70
ea
-170
eb
-191
ec
-191
DRIVE END SHAFT
l
t
E
GA
140
74,5
140
74,5
TYPE
(U)GK1808
(U)GK1808
(U)GK1808
(U)GK1808
DIN
IEC amps
200
400
800
1600
ed
-175
u
F
20
20
x1
-546
568
517
492
ee
-191
ef
-175
92
ej
-206
bh
-M8-1.25
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
48
110
51,5
14
48
110
51,5
14
g1
-502
596
646
646
CONDUIT
SIZE
Pg36, Pg16
(2)
(2)
(2)
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
(7) Opposite Drive End Shaft Supplied Only When Specified
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
eh
-206
WT.
KG.
411
495
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK2008-ULGK2010
TYPE
(U)GK2008
(U)LGK2008
(U)GK2010
(U)LGK2010
DIN
IEC
DIN
IEC
a
B
780
780
900
900
b
A
318
e
BB
974
1038
1050
1114
c
HA
18
k
L
1182
1245
1258
1321
TYPE
(U)(L)GK2008
(U)(L)GK2008
(U)(L)GK2008
f
AB
396
k1
LC
1335
1398
1411
1474
DIN
IEC
g
AC
418
m1
BA
172
172
172
172
amps
400
800
1600
h
H
200
m2
—
202
265
202
265
x1
—
563
512
487
n
AA
80
p
HD
488
s
K
19
w1
C
133
x2
—
172
172
172
172
w2
—
141
205
97
161
ea
—
154
217
154
217
d
D
75
75
75
75
g1
—
642
692
692
eb
—
162
ec
—
229
ed
—
143
DRIVE END SHAFT
l
t
E
GA
140 79, 5
140 79, 5
140 79, 5
140 79, 5
TYPE
(U)(L)GK2010
(U)(L)GK2010
(U)(L)GK2010
DIN
IEC
amps
400
800
1600
u
F
20
20
20
20
x1
—
639
588
563
ee
—
229
ef
—
197
93
ej
—
178
bh
—
M8-1.25
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
60
140
64
18
60
140
64
18
60
140
64
18
60
140
64
18
g1
—
642
692
692
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
(7) Opposite Drive End Shaft Supplied Only When Specified
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
eh
—
244
WT.
KG.
655
655
707
707
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK2208-ULGK2210
TYPE
(U)GK2208
(U)LGK2208
(U)GK2210
(U)LGK2210
DIN
IEC
DIN
IEC
a
B
840
840
960
960
b
A
356
e
BB
1060
1104
1123
1168
c
HA
18
f
AB
446
g
AC
468
k
L
1303
1348
1367
1412
k1
LC
1456
1501
1520
1565
m1
BA
184
184
184
184
TYPE
(U)(L)GK2208
(U)(L)GK2208
(U)(L)GK2208
DIN
IEC
amps
400
800
1600
g2
—
280
m2
—
217
262
217
262
x1
—
619
569
543
h
H
225
n
AA
85
x
—
205
161
205
161
p
HD
538
ea
—
165
210
165
210
g1
—
692
742
742
s
K
19
w2
CA
101
145
101
145
w1
C
149
d
D
80
80
80
80
eb
—
181
ec
—
254
DRIVE END SHAFT
l
t
E
GA
170
85
170
85
170
85
170
85
TYPE
(U)(L)GK2210
(U)(L)GK2210
(U)(L)GK2210
DIN
IEC
amps
400
800
1600
ed
—
162
u
F
22
22
22
22
x1
—
683
633
607
ee
—
254
ef
—
222
94
ej
bh
—
—
197 M8-1.25
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
65
140
69
18
65
140
69
18
65
140
69
18
65
140
69
18
g1
—
692
742
742
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
(7) opposite drive end shaft supplied only when specified
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
eh
—
270
WT.
KG.
897
897
947
947
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK2508-UGK2510
TYPE
(U)GK2508
(U)GK2510
DIN
IEC
DIN
IEC
b
A
406
a
e
B
BB
900 1190
1030 1335
c
HA
22
g2
—
280
313
f
AB
495
g
AC
510
k
k1
L
LC
1433 1590
1580 1735
TYPE
(U)GK2508
(U)GK2508
(U)GK2508
DIN
IEC
m1
BA
222
222
amps
400
800
1600
h
H
250
m2
—
310
310
x1
—
563
588
639
n
AA
90
p
HD
608
608
s
K
24
x2
—
209
209
g1
—
757
807
807
w1
C
168
w2
CA
211
228
ea
—
234
d
D
90
90
TYPE
(U)GK2510
(U)GK2510
(U)GK2510
eb
—
222
ec
—
286
ed
—
203
DRIVE END SHAFT
l
t
E
GA
170
95
170
95
DIN
IEC
amps
400
800
1600
u
F
25
25
x1
—
709
734
758
ee
—
267
ef
—
246
95
ej
—
242
bh
—
M8-1.25
OPPOSITE DRIVE END SHAFT
WT.
d1
l1
t1
u1
KG.
DA
EA
GC
FA
75
140
79,5
20
1246
75
140
79,5
20
1459
g1
—
757
807
807
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
(7) Opposite Drive End Shaft Supplied Only When Specified.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
eh
—
306
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
DIMENSIONS ARE IN MILLIMETERS
DRIVE END SHAFT AND KEY
FRAME
L
LD
BB
B
GK2806
UGK2806
GK2808
UGK2808
GK2810
UGK2810
1507
1507
1607
1607
1767
1767
503
503
603
603
763
763
1184
1184
1284
1284
1444
1444
900
900
1000
1000
1160
1160
SIGNAL
DEVICE
5PY
BC-42
BC46
M-627A
M-628A
M-727A
XL
276
340
398
267
267
267
(5)
OPPOSITE DRIVE END SHAFT AND KEY
D(2)
E
F
G(3)
GD
GJ
LC-L
DA(2)
EA
FA
GB(3)
GF
GK
WT.
(KG.)
100
110
100
110
100
110
210
210
210
210
210
210
28
28
28
28
28
28
90
90
90
90
90
90
16
16
16
16
16
16
165
165
165
165
165
165
180
180
180
180
180
180
80
80
80
80
80
80
170
170
170
170
170
170
22
22
22
22
22
22
71
71
71
71
71
71
14
14
14
14
14
14
154
154
154
154
154
154
1394
1394
1583
1583
1864
1864
WT.
(KG.)
3,2
11,4
15,9
6,4
6,4
6,4
SIGNAL
DEVICE
M-737A
RD-11
RD-51
RD-61
RD-62
RE-045
XL
267
254
424
254
254
65
WT.
(KG.)
6,4
7,7
17,2
7,7
7,7
2,3
(1) This Dimension Will Not Be Exceeded. Shims Up To 1,5mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) “D” And “DA” Vary -0,025
(3) “G” And “GB” Vary -0,38
(4) Removable Cover Plate For Customer Drilling. Terminal Box Can Be Positioned For Either Top Or Bottom Conduit Entry
(5) Opposite Drive End Shaft Supplied Only When Specified
(6) Terminal Box Located On Opposite Side When Specified
96
SIGNAL
DEVICE
RE-210
TG2168A
TS2014N
TS2087N
AVTRON M3
XL
389
65
165
279
102
WT.
(KG.)
13,6
2,3
2,3
6,4
6,4
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK1104-GK1110
TYPE
GK1104
GK1106
GK1108
GK1110
DIN
IEC
a
B
318
356
406
432
e
BB
356
394
445
471
TYPE
GK1104
GK1108
k
L
616
655
705
731
DIN
IEC
k1
LC
688
726
776
802
b
A
190
m1
BA
111
111
111
111
DIN
x1
IEC amps —
100 228
100 317
c
HA
6
m2
—
111
111
111
111
g1
—
361
361
f
AB
229
x
—
205
205
205
205
g
AC
222
x2
—
137
137
137
137
CONDUIT
SIZE
Pg29,Pg16
Pg29,Pg16
g2
—
260
w2
CA
160
160
160
160
d
D
38
38
38
38
TYPE
GK1106
GK1110
h
H
112
n
AA
35
p
HD
578
DRIVE END SHAFT
l
t
E
GA
80
41
80
41
80
41
80
41
u
F
10
10
10
10
DIN
x1
IEC amps —
100 266
100 343
s
K
12
w1
C
70
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
28
60
31
8
28
60
31
8
28
60
31
8
28
60
31
8
g1
—
361
361
CONDUIT
SIZE
Pg29,Pg16
Pg29,Pg16
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(3) The Terminal Box Size Varies With Horsepower And Voltage.
(4) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(5) Tolerance Of Dimensions Are According To DIN.
(6) Opposite Drive End Shaft Supplied Only When Specified.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
97
WT.
KG.
84
93
111
120
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
DIN b
TYPE
IEC A
GK1303-GK1311
440
TYPE
GK1303
GK1305
GK1307
GK1309
GK1311
DIN
IEC
a
B
440
490
490
540
610
e
BB
572
603
645
676
746
DIN
x1
TYPE IEC amps —
GK1303
100 238
GK1303
200 225
TYPE
GK1309
GK1309
DIN
IEC
g2
—
254
254
254
254
254
k
L
736
767
809
840
910
k1
IC
858
890
931
963
1033
g1
—
409
423
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
amps
100
200
x1
—
343
330
m1
BA
132
132
132
132
132
m2
—
173
173
173
173
173
c
HA
572
p
HD
578
578
578
578
578
f
AB
254
x2
—
197
197
197
197
197
g
AC
736
x2
—
139
139
139
139
139
DIN
x1
TYPE IEC amps —
GK1305
100 270
GK1305
200 257
g1
—
409
423
CONDUIT
size
Pg29, Pg16
Pg36, Pg16
h
H
858
w2
CA
109
91
132
114
114
g1
—
409
423
TYPE
GK1311
GK1311
n
AA
132
d
D
48
48
48
48
48
s
K
173
w1
C
578
DRIVE END SHAFT
l
t
u
E
GA
F
110 51,5 14
110 51,5 14
110 51,5 14
110 51,5 14
110 51,5 14
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
DIN
IEC
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
FA
GC
FA
42
110
45
12
42
110
45
12
42
110
45
12
42
110
45
12
42
110
45
12
DIN
TYPE IEC amps —
GK1307
100 311
GK1307
200 298
amps
100
200
x1
—
412
400
g1
—
409
423
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(3) The Terminal Box Size Varies With Horsepower And Voltage.
(4) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(5) Tolerance Of Dimensions Are According To DIN.
(6) Opposite Drive End Shaft Supplied Only When Specified.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
98
g1
—
409
423
WT.
KG.
154
166
179
191
215
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
CONDUIT
size
Pg29, Pg16
Pg36, Pg16
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK1606-GK1610
TYPE
GK1606
GK1608
GK1610
DIN
IEC
a
B
550
630
720
DIN
TYPE IEC amps
GK1606
100
GK1606
200
GK1606
400
GK1606
800
e
BB
713
795
897
x1
—
334
322
339
288
g2
—
242
242
242
g1
—
453
467
560
610
k
k1
L
LC
913 1036
996 1119
1098 1220
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
(2)
(2)
DIN
IEC
m1
BA
154
154
154
b
A
254
m2
—
203
203
203
c
HA
12
p
HD
629
629
629
f
AB
314
g
AC
332
x
—
185
185
185
x2
—
172
172
172
w2
CA
128
126
142
DIN
TYPE IEC amps
GK1608
100
GK1608
200
GK1608
400
GK1608
800
x1
—
416
404
421
370
g1
—
453
467
560
610
h
H
160
d
D
60
60
60
n
AA
55
s
K
15
DRIVE END SHAFT
l
t
u
E
GA
F
140
64
18
140
64
18
140
64
18
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
(2)
(2)
w1
C
108
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
48
110
51,5
14
48
110
51,5
14
48
110
51,5
14
DIN
TYPE IEC amps
GK1610
100
GK1610
200
GK1610
400
GK1610
800
—
518
506
523
472
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor Normally Shipped With Undrilled Cable Entry When Over 200 Amps.
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
(7) Opposite Drive End Shaft Supplied Only When Specified.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
99
g1
—
453
467
560
610
WT.
KG.
274
313
363
CONDUIT
SIZE
Pg29, Pg16
Pg36 Pg16
(2)
(2)
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK1808-UGK1810
DIN
TYPE IEC
(U)GK1808
(U)GK1810
a
B
710
790
e
BB
860
999
TYPE
(U)GK1808
(U)GK1808
(U)GK1808
(U)GK1808
k
L
1068
1207
m1
BA
172
172
DIN
IEC amps
200
400
800
1600
DIN
b
c
f
g
g2
h
n
p
s
w1
IEC
A
279
HA
17
AB
358
AC
364
—
235
H
180
AA
75
HD
667
K
15
C
121
m2
—
234
234
x1
—
406
428
377
352
x
—
162
162
g1
—
502
596
646
646
x2
—
170
170
w2
CA
109
168
CONDUIT
SIZE
Pg36, Pg16
(2)
(2)
(2)
d
D
70
70
DRIVE END SHAFT
l
t
E
GA
140
74,5
140
74,5
TYPE
(U)GK1808
(U)GK1808
(U)GK1808
(U)GK1808
DIN
IEC amps
200
400
800
1600
u
F
20
20
x1
—
546
568
517
492
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
48
110
51,5
14
48
110
51,5
14
g1
—
502
596
646
646
CONDUIT
SIZE
Pg36, Pg16
(2)
(2)
(2)
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
(7) Opposite Drive End Shaft Supplied Only When Specified
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
100
WT.
KG.
424
508
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK2008-ULGK2010
TYPE
(U)GK2008
(U)LGK2008
(U)GK2010
(U)LGK2010
DIN
IEC
a
B
780
780
900
900
e
BB
974
1038
1050
1114
k
L
1182
1245
1258
1321
k1
LC
1335
1398
1411
1474
m1
BA
172
172
172
172
DIN
IEC
b
A
318
m2
—
202
265
202
265
DIN
TYPE
IEC amps
(U)(L)GK2008
400
(U)(L)GK2008
800
(U)(L)GK2008
1600
x1
—
563
512
487
c
HA
18
x
—
172
172
172
172
f
AB
396
x2
—
172
172
172
172
g
AC
418
w2
CA
141
205
97
161
g1
—
642
692
692
g2
-216
d
D
75
75
75
75
h
H
200
n
AA
80
p
HD
711
DRIVE END SHAFT
l
t
E
GA
140 79,5
140 79,5
140 79,5
140 79,5
DIN
TYPE
IEC amps
(U)(L)GK2010
400
(U)(L)GK2010
800
(U)(L)GK2010
1600
s
K
19
u
F
20
20
20
20
x1
—
639
588
563
w1
C
133
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
60
140
64
18
60
140
64
18
60
140
64
18
60
140
64
18
g1
—
642
692
692
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
(7) Opposite Drive End Shaft Supplied Only When Specified
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
101
WT.
KG.
665
665
717
717
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
DIN
IEC
TYPE
GK2208-ULGK2210
TYPE
(U)GK2208
(U)LGK2208
(U)GK2210
(U)LGK2210
DIN
IEC
a
B
840
840
960
960
e
BB
1060
1104
1123
1168
k
L
1303
1348
1367
1412
k1
LC
1456
1501
1520
1565
TYPE
(U)(L)GK2208
(U)(L)GK2208
(U)(L)GK2208
DIN
IEC
m1
BA
184
184
184
184
b
A
356
m2
—
218
262
217
262
amps
400
800
1600
x
—
208
208
208
208
x1
—
619
569
543
c
HA
18
f
AB
446
x2
—
208
208
208
208
g
AC
468
w2
A
101
145
101
145
g1
—
692
742
742
g2
—
315
d
D
80
80
80
80
h
H
225
n
AA
85
p
HD
804
DRIVE END SHAFT
l
t
E
GA
170
85
170
85
170
85
170
85
TYPE
(U)(L)GK2210
(U)(L)GK2210
(U)(L)GK2210
DIN
IEC
amps
400
800
1600
s
K
19
w1
C
149
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
65
140
69
18
65
140
69
18
65
140
69
18
65
140
69
18
u
F
22
22
22
22
x1
—
683
633
607
g1
—
692
742
742
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
(7) Opposite Drive End Shaft Supplied Only When Specified.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
102
WT.
KG.
907
907
957
957
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK2508-ULGK2510
TYPE
(U)GK2508
(U)LGK2508
DIN
IEC
a
B
900
1030
e
BB
1190
1335
g2
—
315
315
k
L
1433
1580
DIN
TYPE
(U)GK2508
(U)GK2508
(U)GK2508
IEC
amps
400
800
1600
DIN
IEC
b
A
406
m1
BA
222
222
c
HA
22
m2
—
310
310
x1
g1
—
563
588
639
—
757
807
807
f
AB
495
p
HD
855
855
g
AC
510
h
H
250
n
AA
90
x
—
124
124
s
K
24
x2
—
209
209
DIN
TYPE
(U)GK2510
(U)GK2510
(U)GK2510
IEC
amps
400
800
1600
w1
C
168
DRIVE END SHAFT
l
t
E
GA
170
95
170
95
d
D
90
90
x1
g1
—
709
734
758
—
757
807
807
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
103
u
F
25
25
WT.
KG.
1266
1479
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK1104-GK1110
TYPE
GK1104
GK1106
GK1108
GK1110
TYPE
GK1104
GK1108
DIN
IEC
DIN
IEC
a
B
318
356
406
432
amps
100
100
DIN
IEC
e
BB
356
394
445
471
x1
—
228
317
g1
—
361
361
b
A
190
c
HA
6
k
L
616
655
705
731
CONDUIT
SIZE
Pg29, Pg16
Pg29, Pg16
m1
BA
111
111
111
111
f
AB
229
g
AC
222
g2
—
260
x
h
H
112
m2
—
111
111
111
111
205
205
205
205
x2
—
137
137
137
137
TYPE
GK1106
GK1110
DIN
IEC amps
100
100
x1
—
266
343
g1
—
361
361
n
AA
35
p
HD
578
d
D
38
38
38
38
DRIVE END SHAFT
l
t
E
GA
80
41
80
41
80
41
80
41
CONDUIT
SIZE
Pg29, Pg16
Pg29, Pg16
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm
And m6 For Diameters Above.
(3) The Terminal Box Size Varies With Horsepower And Voltage.
(4) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(5) Tolerance Of Dimensions Are According To DIN.
(6) Opposite Drive End Shaft Supplied Only When Specified.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
104
s
K
12
w1
C
70
u
F
10
10
10
10
WT.
KG.
84
93
111
120
TACH MODEL
x3
REO R1B
TDP 0,2T-4
TDP O,2T-4+FSL
KGP 503.30
DGP 506.30
800123-2R
HOHNER 3000
RL67
210
220
220
260
310
105
170
51
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK1303-UGK1311
TYPE
(U)GK1303
(U)GK1305
(U)GK1307
(U)GK1309
(U)GK1311
DIN
IEC
a
B
440
490
490
540
610
e
BB
572
603
645
676
746
DIN
x1
TYPE
IEC amps —
(U)GK1303
100 238
(U)GK1303
200 225
TYPE
(U)GK1309
(U)GK1309
g1
—
409
423
DIN
IEC
g2
—
254
254
254
254
254
k
L
736
767
809
840
910
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
amps
100
200
x1
—
343
330
DIN
IEC
m1
BA
132
132
132
132
132
b
A
216
m2
—
173
173
173
173
173
c
HA
11
p
HD
578
578
578
578
578
f
AB
260
g
AC
275
x
—
197
197
197
197
197
x2
—
139
139
139
139
139
DIN
x1
TYPE
IEC amps —
(U)GK1305
100 270
(U)GK1305
200 257
g1
—
409
423
CONDUIT
size
Pg29, Pg16
Pg36, Pg16
g1
—
409
423
h
H
132
d
D
48
48
48
48
48
n
AA
48
DRIVE END SHAFT
l
t
E
GA
110
51,5
110
51,5
110
51,5
110
51,5
110
51,5
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
DIN
TYPE
IEC
(U)GK1311
(U)GK1311
s
K
12
w1
C
89
u
F
14
14
14
14
14
WT.
KG.
154
166
179
191
215
DIN
TACH MODEL IEC
REO R1B
TDP 0,2T-4
TDP 0,2T-4+FSL
KGP 503.30
KGP 506.30
800123-2R
Hohner 3000
HS35
TDP0.2LT+0G9
RL67
H20
DIN
x1
TYPE
IEC amps —
(U)GK1307
100 311
(U)GK1307
200 298
amps
100
200
x1
—
412
400
g1
—
409
423
CONDUIT
size
Pg29, Pg16
Pg36, Pg16
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 Mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The Isa-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(3) The Terminal Box Size Varies With Horsepower And Voltage.
(4) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(5) Tolerance Of Dimensions Are According To DIN.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
105
g1
—
409
423
x3
—
210
220
220
260
310
105
170
51
230
51
103
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
DIN
TYPE
IEC
GK1606-GK1610
TYPE
GK1606
GK1608
GK1610
DIN
IEC
a
B
550
630
720
DIN
x1
TYPE IEC amps —
GK1606
100 334
GK1606
200 322
GK1606
400 339
GK1606
800 288
e
BB
713
795
897
g1
—
453
467
560
610
g2
—
242
242
242
k
L
908
996
1098
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
(2)
(2)
m1
BA
154
154
154
b
c
f
g
h
n
s
w1
TACH MODEL
x3
A
254
HA
12
AB
314
AC
332
H
160
AA
55
K
15
C
108
REO R1B
TDP 0,2T-4
TDP O,2T-R+FSL
DGP 503.30
DGP 506.30
800123-2R
HOHNER 3000
TS2014
HS35
210
220
220
260
310
105
170
143
51
m2
—
203
203
203
p
HD
629
629
629
x
—
185
185
185
DIN
x1
TYPE IEC amps —
GK1608
100 416
GK1608
200 404
GK1608
400 421
GK1608
800 370
x2
—
172
172
172
g1
—
453
467
560
610
d
D
55
55
55
DRIVE END SHAFT
l
t
E
GA
110
59
110
59
110
59
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
(2)
(2)
u
F
16
16
16
WT.
KG.
274
313
363
DIN
TYPE IEC amps —
GK1610
100 518
GK1610
200 506
GK1610
400 523
GK1610
800 472
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
106
g1
—
453
467
560
610
CONDUIT
SIZE
Pg29, Pg16
Pg36 Pg16
(2)
(2)
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
DIN
IEC
TYPE
GK1808-UGK1810
DIN
TYPE IEC
(U)GK1808
(U)GK1810
TYPE
(U)GK1808
(U)GK1808
(U)GK1808
(U)GK1808
DIN
IEC
a
B
710
790
amps
200
400
800
1600
b
A
279
e
BB
860
999
x1
—
406
428
377
352
c
HA
17
k
L
1068
1207
g1
—
502
596
646
646
f
AB
358
m1
BA
172
172
g
AC
364
m2
—
234
234
CONDUIT
SIZE
Pg36, Pg16
(2)
(2)
(2)
x
—
162
162
g2
—
235
h
H
180
x2
—
170
170
w2
CA
109
168
TYPE
(U)GK1808
(U)GK1808
(U)GK1808
(U)GK1808
DIN
IEC
n
AA
75
p
HD
667
s
K
15
w1
C
121
DRIVE END SHAFT
d
l
t
u
D
E
GA
F
70
140
74,5
20
70
140
74,5
20
amps
200
400
800
1600
x1
—
546
568
517
492
g1
—
502
596
646
646
WT.
KG.
424
508
CONDUIT
SIZE
Pg36, Pg16
(2)
(2)
(2)
TACH MODEL
210
TDP 0,2T-4
220
TDP O,2T-4+FSL
220
KGP 503.30
260
KGP 506.30
310
800123-2
105
HOHNER 3000
170
845H
160
HOHNER 30
190
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
107
x3
REO R1B
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK2008-ULGK2010
TYPE
(U)GK2008
(U)LGK2008
(U)GK2010
(U)LGK2010
DIN
IEC
a
B
780
780
900
900
e
BB
974
1038
1050
1114
k
L
1182
1245
1258
1321
TYPE
(U)(L)GK2008
(U)(L)GK2008
(U)(L)GK2008
m1
BA
172
172
172
172
DIN
IEC
b
A
318
m2
—
202
265
202
265
DIN
x1
IEC amps —
400 563
800 512
1600 487
c
HA
18
x
—
172
172
172
172
f
AB
396
x2
—
172
172
172
172
g1
—
642
692
692
g
AC
418
d
D
75
75
75
75
g2
—
216
h
H
200
n
AA
80
p
HD
711
DRIVE END SHAFT
l
t
E
GA
140
79,5
140
79,5
140
79,5
140
79,5
TYPE
(U)(L)GK2010
(U)(L)GK2010
(U)(L)GK2010
s
K
19
u
F
20
20
20
20
DIN
x1
IEC amps —
400 639
800 588
1600 563
w1
C
133
WT.
KG.
665
665
717
717
TACH MODEL
REO R1B
TDP 0,2T-4
TDP O,2T-4+FSL
KGP 503.30
KGP 506.30
800123-2R
HOHNER 3000
HS35
INLAND TGF2100
HSD35
g1
—
642
692
692
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
108
x3
210
220
220
260
310
105
170
51
45
84
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK2208-ULGK2210
TYPE
(U)GK2208
(U)LGK2208
(U)GK2210
(U)LGK2210
DIN
IEC
a
B
840
840
960
960
e
BB
1060
1104
1123
1168
k
L
1303
1348
1367
1412
TYPE
(U)(L)GK2208
(U)(L)GK2208
(U)(L)GK2208
m1
BA
184
184
184
184
DIN
IEC
m2
—
217
262
217
262
b
A
356
x
—
208
208
208
208
DIN
x1
IEC amps —
400 619
800 569
1600 543
c
HA
18
f
AB
446
x2
—
208
208
208
208
g
AC
468
d
D
80
80
80
80
g1
—
692
742
742
g2
—
315
h
H
225
n
AA
85
DRIVE END SHAFT
l
t
E
GA
170
85
170
85
170
85
170
85
TYPE
(U)(L)GK2210
(U)(L)GK2210
(U)(L)GK2210
p
HD
804
u
F
22
22
22
22
s
K
19
w1
C
149
TACH MODEL
210
TDP 0,2T-4
220
TDP O,2T-4+FSL
220
WT.
KG.
KGP 503.30
260
KGP 506.30
310
907
907
957
957
800123-2R
105
HOHNER 3000
170
RL67
51
HS35
51
DIN
x1
IEC amps —
400 683
800 633
1600 607
g1
—
692
742
742
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
109
x3
REO R1B
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK2508-UGK2510
TYPE
(U)GK2508
(U)LGK2508
DIN
IEC
a
e
B
BB
900 1190
1030 1335
TYPE
(U)GK2508
(U)GK2508
(U)GK2508
g2
—
315
315
DIN
IEC amps
400
800
1600
k
L
1433
1580
m1
BA
222
222
x1
—
563
588
639
g1
—
757
807
807
DIN
IEC
m2
—
310
310
b
A
406
p
HD
855
855
c
HA
22
x
—
124
124
f
AB
495
x2
—
209
209
TYPE
(U)GK2510
(U)GK2510
(U)GK2510
DIN
IEC
g
AC
510
s
K
24
w1
C
168
DRIVE END SHAFT
d
l
t
u
D
E
GA
F
90 170 95
25
90 170 95
25
WT.
KG.
1266
1479
amps
400
800
1600
h
H
250
x1
—
709
734
758
n
AA
90
g1
—
757
807
807
TACH MODEL
x3
REO R1B
TDP 0,2T-4
TDP O,2T-4+FSL
KGP 503.30
KGP 506.30
800123-2R
HOHNER 3000
M785 (AVTRON)
LITTON G71
RD-120
210
220
220
260
310
105
170
262
225
43
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
110
WT
FIG.
LBS.
15
2
-2
-2
-2
-2
15
2
-2
20
2
-2
5
1
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
SIGNAL
XL
WT.
(KG.)
5PY
BC-42
BC-46
M627A
M628A
M-727A
M-737A
RD-11
RD-51
RD-61
H56
RE-045
RE-210
TG2168A
TS2014N
TS2087N
REOR1
HS35
SL85
276
340
398
267
267
267
267
254
424
254
254
65
389
65
165
279
266
60
60
3,2
11,4
15,9
6,4
6,4
6,4
6,4
7,7
17,2
7,7
7,7
2,3
13,6
2,3
2,3
6,4
3,2
1,0
1,0
FRAME
GK2806
UGK2806
GK2808
UGK2808
GK2810
UGK2810
L
LD
BB
1507
1507
1607
1607
1767
1767
503
503
603
603
763
763
1184
1184
1284
1284
1444
1444
DIMENSIONS ARE IN MILLIMETERS
DRIVE END SHAFT AND KEY
B
E
F
G (3)
GD
D(2)
900
100
210
28
90
16
900
110
210
28
90
16
1000
100
210
28
90
16
1000
110
210
28
90
16
1160
100
210
28
90
16
1160
110
210
28
90
16
(1) This Dimension Will Not Be Exceeded. Shims Up To 1,5 mm In Thickness Are Usually Required For
Couopled Or Geared Machines
(2) “D” and “DA” Vary -0,025.
(3) “G” and “GB” Vary -0,38.
(4) Removable Cover Plate For Customer Drilling.
Terminal Box Can Be Positioned For Either Top Or Bottom Conduit Entery.
(5) Opposite Drive End Shaft Supplied Only When Specified.
(6) Terminal Box Located On Opposite Side When Specified.
(7) Air Filter Supplied Only When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4 Except Blower Assembly And Terminal Can Not
Be Located At The Same Position.
111
GJ
165
165
165
165
165
165
WT.
(KG.)
1485
1485
1674
1674
1955
1955
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
DIN
TYPE
IEC
GK1303Y-GK1311Y
e
BB
572
603
645
676
746
g2
—
254
254
254
254
254
k
k1 m1
L
LC
BA
795 917 132
826 949 132
868 990 132
899 1022 132
969 1092 132
DIN
x1
TYPE IEC amps —
GK1303Y
63
254
GK1303Y
100 238
GK1303Y
200 225
g1
—
391
409
423
CONDUIT
SIZE
Pg21, Pg16
Pg29, Pg16
Pg36, Pg16
TYPE
GK1303Y
GK1305Y
GK1307Y
GK1309Y
GK1311Y
DIN
IEC
a
B
440
490
490
540
610
DIN
TYPE IEC
GK1309Y
GK1309Y
GK1309Y
amps
63
100
200
x1
—
358
343
330
b
A
216
m2
—
173
173
173
173
173
c
HA
11
p
HD
578
578
578
578
578
f
AB
260
x
—
197
197
197
197
197
g
AC
275
x2
—
197
197
197
197
197
DIN
x1
TYPE IEC amps —
GK1305Y
63
285
GK1305Y
100 270
GK1305Y
200 257
g1
—
391
409
423
CONDUIT
size
Pg21, Pg16
Pg29, Pg16
Pg36, Pg16
h
H
132
w2
CA
109
91
132
114
114
g1
—
391
409
423
n
AA
48
d
D
48
48
48
48
48
112
w1
C
146
DRIVE END SHAFT
l
l2
t
E
—
GA
110 110 51,5
110 110 51,5
110 110 51,5
110 110 51,5
110 110 51,5
CONDUIT
SIZE
Pg21, Pg16
Pg29, Pg16
Pg36, Pg16
DIN
TYPE IEC
GK1311Y
GK1311Y
GK1311Y
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled
Or Geared Machines.
(2) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6
For Diameters Up To 50 mm and m6 For Diameters Above.
(3) The Terminal Box Size Varies With Horsepower And Voltage.
(4) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(5) Tolerance Of Dimensions Are According To DIN.
(6) Opposite Drive End Shaft Supplied Only When Specified.
(7) Tolerance For Flanges According To DIN 42948.
s
K
12
amps
63
100
200
a1
P
350
u
F
14
14
14
14
14
b1
N
250
c1
LA
16
f1
T
4
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
42
110
45
12
42
110
45
12
42
110
45
12
42
110
45
12
42
110
45
12
DIN
TYPE IEC amps —
GK1307Y
63
327
GK1307Y
100 311
GK1307Y
200 298
x1
—
428
412
400
e1
M
300
g1
—
391
409
423
g1
—
391
409
423
s1
S
19
WT.
KG.
159
171
184
196
221
CONDUIT
SIZE
Pg21, Pg16
Pg29, Pg16
Pg36, Pg16
CONDUIT
size
Pg21, Pg16
Pg29, Pg16
Pg36, Pg16
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
DIN
b
TYPE
IEC A
GK1606Y-GK1610Y
254
TYPE
GK1606Y
GK1608Y
GK1610Y
DIN
IEC
a
B
550
630
720
DIN
x1
TYPE IEC amps —
GK1606Y
63
350
GK1606Y
100 334
GK1606Y
200 322
GK1606Y
400 339
GK1606Y
800 288
e
BB
713
795
897
g2
—
242
242
242
g1
—
435
453
467
560
610
CONDUIT
SIZE
Pg21, Pg16
Pg29, Pg16
Pg36, Pg16
(2)
(2)
k
L
943
1026
1128
c
f
g
h
12
n
s
w1
a1
b1
c1
e1
f1
s1
HA
12
AB
314
AC
332
H
160
—
140
AA
55
K
15
C
138
P
400
N
300
LA
15
M
350
T
5
S
19
d
D
60
60
60
DRIVE END SHAFT
l
t
E
GA
140
64
140
64
140
64
m1
BA
154
154
154
m2
—
203
203
203
DIN
TYPE IEC amps
GK1608Y
63
GK1608Y
100
GK1608Y
200
GK1608Y
400
GK1608Y
800
p
HD
629
629
629
x1
—
432
416
404
421
370
x
—
185
185
185
g1
—
435
453
467
560
610
x2
—
202
202
202
CONDUIT
SIZE
Pg21, Pg16
Pg29, Pg16
Pg36, Pg16
(2)
(2)
DIN
TYPE IEC amps
GK1610Y
63
GK1610Y
100
GK1610Y
200
GK1610Y
400
GK1610Y
800
x1
—
534
518
506
523
472
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
(7) Tolerance for Flanges according to DIN 42948
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
113
u
F
18
18
18
g1
—
435
453
467
560
610
WT.
KG.
285
324
374
CONDUIT
SIZE
Pg21, Pg16
Pg29, Pg16
Pg36 Pg16
(2)
(2)
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
DIN
TYPE
IEC
GK1606Y-GK1610Y
TYPE
GK1606Y
GK1608Y
GK1610Y
DIN
IEC
a
B
550
630
720
DIN
TYPE IEC amps
GK1606Y
100
GK1606Y
200
GK1606Y
400
GK1606Y
800
b
c
f
g
h
12
n
s
w1
a1
b1
c1
e1
f1
s1
A
254
HA
12
AB
314
AC
332
H
160
—
140
AA
55
K
15
C
138
P
400
N
300
LA
15
M
350
T
5
S
19
e
BB
713
795
897
x1
—
334
322
339
288
g2
—
242
242
242
g1
—
453
467
560
610
k
L
943
1026
1128
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
(2)
(2)
m1
BA
154
154
154
m2
—
203
203
203
p
HD
629
629
629
x
—
185
185
185
DIN
TYPE IEC amps
GK1608Y
100
GK1608Y
200
GK1608Y
400
GK1608Y
800
x1
—
416
404
421
370
x2
—
202
202
202
g1
—
453
467
560
610
d
D
60
60
60
DRIVE END SHAFT
l
t
E
GA
140
64
140
64
140
64
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
(2)
(2)
u
F
18
18
18
WT.
KG.
285
324
374
DIN
TYPE IEC amps
GK1610Y
100
GK1610Y
200
GK1610Y
400
GK1610Y
800
TACH MODEL
REO R1B
TDP 0,2T-4
TDP O,2T-4+FSL
KGP 503.30
KGP 506.30
800123-2R
HOHNER 3000
845H
TS2014
x1
—
518
506
523
472
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
(7) Tolerance for Flanges according to DIN 42948
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
114
g1
—
453
467
560
610
x3
210
220
220
260
310
105
170
160
143
CONDUIT
SIZE
Pg29, Pg16
Pg36 Pg16
(2)
(2)
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
ENCLOSURE:
Drip-Proof IP23
MOUNTING:
Flange Mounted
METHOD OF DRIVE: Coupled or Belted
COOLING:
Force Ventilated IC06, Air Filtered
ACCESSORIES: Flange Mounted Tachometer
IEC TYPES GK1808Y THRU GK1810Y
DIN b
TYPE
IEC A
GK1808Y-UGK1810Y
279
TYPE
(U)GK1808Y
(U)GK1810Y
TYPE
(U)GK1808Y
(U)GK1808Y
(U)GK1808Y
(U)GK1808Y
DIN
IEC
DIN
IEC
a
B
710
790
amps
200
400
800
1600
c
HA
17
e
BB
860
999
x1
—
406
428
377
352
f
g
g2
h
AB AC
-H
358 364 235 180
k
L
1148
1288
g1
—
502
596
646
646
m1
BA
172
172
m2
—
234
234
CONDUIT
SIZE
Pg36, Pg16
(2)
(2)
(2)
n
AA
75
x
—
162
162
p
HD
667
x2
—
202
202
s
K
15
w1 a1 b1
C
P
N
202 400 300
d
D
70
70
DIN
TYPE
IEC
(U)GK1808Y
(U)GK1808Y
(U)GK1808Y
(U)GK1808Y
c1
LA
15
e1
M
350
DRIVE END SHAFT
l
l2
t
E
—
GA
140
140
74,5
140
140
74,5
amps
200
400
800
1600
x1
—
546
568
517
492
g1
—
502
596
646
646
f1
T
5
u
F
20
20
s1
S
19
WT.
KG.
429
513
TACH MODEL
REO R1B
TDP 0,2T-4
TDP O,2T-4+FSL
KGP 503.30
KGP 506.30
800123-2R
HOHNER 3000
845H
CONDUIT
SIZE
Pg36, Pg16
(2)
(2)
(2)
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
(7) Tolerance For Flanges According To DIN 42948
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
115
x3
210
220
220
260
310
105
170
160
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK1104-GK1110
TYPE
GK1104
GK1106
GK1108
GK1110
DIN
IEC
a
B
318
356
406
432
e
BB
356
394
445
471
k
L
616
655
705
731
k1
LC
688
726
776
802
DIN
IEC
m1
BA
111
111
111
111
b
A
190
m2
—
111
111
111
111
c
HA
6
x2
—
137
137
137
137
f
AB
229
w2
CA
160
160
160
160
g
AC
222
d
D
38
38
38
38
h
H
112
n
AA
35
p
HD
269
DRIVE END SHAFT
l
t
E
GA
80
41
80
41
80
41
80
41
s
K
12
u
F
10
10
10
10
w1
C
70
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
28
60
31
8
28
60
31
8
28
60
31
8
28
60
31
8
TYPE
GK1104
DIN
x1
IEC amps —
100 228
g1
—
361
CONDUIT
SIZE
Pg29, Pg16
TYPE
GK1106
DIN
x1
IEC amps —
100 266
g1
—
361
CONDUIT
SIZE
Pg29, Pg16
TYPE
GK1108
DIN
x1
IEC amps —
100 317
g1
—
361
CONDUIT
SIZE
Pg29, Pg16
TYPE
GK1110
DIN
x1
IEC amps —
100 343
g1
—
361
CONDUIT
SIZE
Pg29, Pg16
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Motor normally shipped with undrilled cable entry when over 200 amps
(3) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And m6 For Diameters Above.
(4) The Terminal Box Size Varies With Horsepower And Voltage.
(5) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(6) Tolerance Of Dimensions Are According To DIN.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
116
WT.
KG.
84
93
111
120
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
DIN
TYPE
IEC
GK1303-GK1311
b
A
216
c
HA
11
f
AB
260
g
AC
275
h
H
132
n
AA
48
s
K
12
DRIVE END SHAFT
DIN
TYPE IEC
GK1303
GK1305
GK1307
GK1309
GK1311
w1
C
89
OPPOSITE DRIVE END SHAFT
a
e
k
k1
m1
m2
p
x2
w2
d
l
t
u
d1
l1
t1
u1
B
440
490
490
540
610
BB
572
603
645
676
746
L
736
767
809
840
910
LC
858
890
931
963
1033
BA
132
132
132
132
132
—
173
173
173
173
173
HD
315
315
315
315
315
—
139
139
139
139
139
CA
109
91
132
114
114
D
48
48
48
48
48
E
110
110
110
110
110
GA
51,5
51,5
51,5
51,5
51,5
F
14
14
14
14
14
DA
42
42
42
42
42
EA
110
110
110
110
110
GC
45
45
45
45
45
FA
12
12
12
12
12
DIN
x1
TYPE IEC amps —
GK1303
100 238
GK1303
200 225
TYPE
GK1309
GK1309
DIN
IEC
g1
—
409
423
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
amps
100
200
x1
—
343
330
DIN
x1
TYPE IEC amps —
GK1305
100 270
GK1305
200 257
g1
—
409
423
CONDUIT
size
Pg29, Pg16
Pg36, Pg16
g1
—
409
423
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
TYPE
GK1311
GK1311
DIN
IEC
DIN
TYPE IEC amps —
GK1307
100 311
GK1307
200 298
amps
100
200
x1
—
412
400
g1
—
409
423
CONDUIT
size
Pg29, Pg16
Pg36, Pg16
(1) “H” Dimension Will Not Be Exceeded. Shims Up To .5 Mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm And M6 For Diameters Above.
(3) The Terminal Box Size Varies With Horsepower And Voltage.
(4) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(5) Tolerance Of Dimensions Are According To DIN.
(6) Opposite Drive End Shaft Supplied Only When Specified.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
117
g1
—
409
423
WT.
KG.
154
166
179
191
215
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
TYPE
GK1606-GK1610
TYPE
GK1606
GK1608
GK1610
DIN
IEC
DIN
TYPE IEC
GK1606
GK1606
GK1606
GK1606
a
B
550
630
720
amps
100
200
400
800
e
BB
713
795
897
x1
—
334
322
339
288
k
L
913
996
1098
g1
—
453
467
560
610
k1
LC
1036
1119
1220
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
(2)
(2)
DIN
IEC
m1
BA
154
154
154
b
A
254
m2
—
203
203
203
c
HA
12
p
HD
380
380
380
DIN
TYPE IEC
GK1608
GK1608
GK1608
GK1608
f
AB
314
x2
—
172
172
172
amps
100
200
400
800
g
AC
332
w2
CA
128
126
142
x1
—
416
404
421
370
h
H
160
d
D
60
60
60
g1
—
453
467
560
610
n
AA
55
s
K
15
DRIVE END SHAFT
l
t
E
GA
140
64
140
64
140
64
CONDUIT
SIZE
Pg29, Pg16
Pg36, Pg16
(2)
(2)
u
F
18
18
18
w1
C
108
OPPOSITE DRIVE END SHAFT
d1
l1
t1
u1
DA
EA
GC
FA
48
110
51,5
14
48
110
51,5
14
48
110
51,5
14
DIN
TYPE IEC
GK1610
GK1610
GK1610
GK1610
amps
100
200
400
800
—
518
506
523
472
(1) “h” Dimension Will Not Be Exceeded. Shims Up To .5 mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) Shaft Extensions Are According To DIN 746. Tolerances Are Based On The ISA-Fitting System Using k6 For Diameters Up To 50 mm and m6 For Diameters Above.
(3) The Terminal Box Size Varies With Horsepower And Voltage.
(4) The Terminal Box Can Be Placed On The Right Or Left, Dimensions Remain The Same.
(5) Tolerance Of Dimensions Are According To DIN.
(6) Opposite Drive End Shaft Supplied Only When Specified.
Terminal Box Can Be Rotated For Lead Outlet At Top, Sides Or Bottom.
Terminal Box Located On Opposite Side When F-1, W-2, W-3, W-6, W-8,
Or C-2 Mounting Is Specified. Box Located On Top When Specified.
Blower Assembly Can Be Located At Positions 1, 2, Or 4, Except
Blower Assembly And Terminal Box Can Not Be Located At The Same Position.
Motor Weight May Vary 15% For Non-Standard Ratings And/Or Accessories.
If Mounting Clearance Details Are Required, Consult Factory.
118
g1
—
453
467
560
610
WT.
KG.
274
313
363
CONDUIT
SIZE
Pg29, Pg16
Pg36 Pg16
(2)
(2)
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Industrial Direct Current Motors and Generators – RPM III
DIMENSIONS ARE IN MILLIMETERS
FRAME
L
LD
LE
BB
B
GK2806
UGK2806
GK2808
UGK2808
GK2810
UGK2810
1507
1507
1607
1607
1767
1767
503
503
603
603
763
763
879
879
979
979
1139
1139
1184
1184
1284
1284
1444
1444
900
900
1000
1000
1160
1160
SIGNAL
DEVICE
5PY
BC-42
BC46
M-627A
M-628A
M-727A
XL
276
340
398
267
267
267
DRIVE END SHAFT AND KEY
(5)
OPPOSITE DRIVE END SHAFT AND KEY
D(2)
E
F
G(3)
GD
GJ
LC-L
DA(2)
EA
FA
GB(3)
GF
GK
WT.
(KG.)
100
110
100
110
100
110
210
210
210
210
210
210
28
28
28
28
28
28
90
90
90
90
90
90
16
16
16
16
16
16
165
165
165
165
165
165
180
180
180
180
180
180
80
80
80
80
80
80
170
170
170
170
170
170
22
22
22
22
22
22
71
71
71
71
71
71
14
14
14
14
14
14
154
154
154
154
154
154
1394
1394
1583
1583
1864
1864
WT.
(KG.)
3, 2
11, 4
15, 9
6, 4
6, 4
6, 4
SIGNAL
DEVICE
M-737A
RD-11
RD-51
RD-61
RD-62
RE-045
XL
267
254
424
254
254
65
WT.
(KG.)
6, 4
7, 7
17, 2
7, 7
7, 7
2, 3
(1) This Dimension Will Not Be Exceeded. Shims Up To 1,5mm In Thickness Are Usually Required For Coupled Or Geared Machines.
(2) “D” And “DA” Vary -0,025
(3) “G” And “GB” Vary -0,38
(4) Removable Cover Plate For Customer Drilling. Terminal Box Can Be Positioned For Either Top Or Bottom Conduit Entry
(5) Opposite Drive End Shaft Supplied Only When Specified
(6) Terminal Box Located On Opposite Side When Specified
119
SIGNAL
DEVICE
RE-210
TG2168A
TS2014N
TS2087N
AVTRON M3
XL
389
65
165
279
102
WT.
(KG.)
13, 6
2, 3
2, 3
6, 4
6, 4
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Modifications Index
Modifications are listed in alphabetical order by major topic
heading. This index provides a cross-reference to enable you to
find specific modifications.
Modifications in this section are to be added to the basic motor
when features not included on the standard motor are required.
Addition of certain modifications may cause the frame size to
increase.
A complete description of the features of standard DC motors is
given in General Information Section.
Modification
Mod No.
Page
Modification
Air Pressure Switch........................................ 134122
Altitude – 1001-2680 m. ............................... 101121
Ambient Temperature – High.......................... 105121
– Low.......................... 106-108 121
Application Data
(Refer to Technical Description Section)..... ——
Page
Overspeed Switch ......................................... 355A124
Overtemperature Protection .......................... 410-418125-126
Paint, Special ................................................ 240123
Provision for Mounting Tachometer ............... 317124
Resistance Temperature Detector ................. 418126
Resolver ........................................................ 544124
Roller Bearing – Drive End ............................ 126121
Balance, Special
Grade “R” ................................................. 112121
Grade “S” ................................................. 113121
Bases – Heavy Duty ...................................... 121121
Bearings Insulated ......................................... 125121
Belted Drive – Reinforced Bearing ................ 126121
Blowers, Motor Mounted ............................... 130121
Brackets, IM B35........................................... 140122
Brakes, Disc Type ......................................... 150122
Brush Wear Sensors ...................................... 155A, 155B
122
Separately Ventilated Enclosures .................. 183123
Series Field ................................................... 224123
Shaft Modifications
Drive End – NEMA .................................... 272A123
Face Type Seal .......................................... 276123
Lip type Seal ............................................. 275123
Non-Standard Diameter ............................ 272-273 123
Non-Standard Length ............................... 274123
Shaft Guard ............................................... 271123
Standard Non-Drive End Extension ........... 269123
Standard NEMA Non-Drive End ................. 269A123
Steps ........................................................ 277124
Tapered ..................................................... 279124
Threads ..................................................... 278124
Shunt Field – Second .................................... 226123
Slide Bases ................................................... 121121
Space Heater – Motor Mounted .................... 280124
Speed Limit Switch ....................................... 355A124
Coupling, Mounting of Customer’s ................ 177-178 123
DC Tachometers ............................................ 355-359 124
Double Shaft Extension ................................. 269123
Dust-Proof Features – IP55 ........................... 183A123
Enclosures:
Separately Ventilated ................................ 183123
Dust-Proof IP55 ........................................ 183A123
Encoder ......................................................... 545-561 124
ESP Brushes ................................................. 155A122
Field Winding – Series .................................. Filter on Motor Mounted Blower .................... Finish, Special Color ...................................... Force Ventilated Enclosure ............................ Mod No.
Tachometer Generators
DC ............................................................. 355-359 124
Encoders ................................................... 545-546 124
Resolvers .................................................. 544124
Provision for Mounting .............................. 317124
Temperature, Higher than Standard .............. 105121
Temperature, Lower than Standard ............... 106-108 121
Tests ............................................................. 450-453 127
Thermistors ................................................... 412-413 126
Thermostat .................................................... 410-411125-126
224123
131122
240123
244123
Gear Motor – Mounting of Customer’s .......... 244123
Insulated Bearings ......................................... 125121
Vibration Proved Design ................................ 440126
Voltage, Special Blower Motor ....................... 130A121
120
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Modifications
Mod.
No. Modification
ALTITUDE
Standard guarantees are made on the basis that the motor will operate at an altitude from sea level to 1000 m per IEC 34-1.
101 For machines suitable for operation at
altitudes 1001–2680 m – Applicable to all enclosures.
AMBIENT TEMPERATURE
105 For motors suitable for operation in ambients
AMBIENT
greater than 40°C. Note: Frame size may change. 41°C - 60°C
Refer to Baldor Electric.
65°C
MODIFICATION
Motors suitable for operation in low ambient temperatures. Note: Base speeds and regulation may not be in accordance with IEC standards. Motors should have space heater (Mod. 280) added to prevent condensation of moisture when unenergized.
106 Motors suitable for operation in ambients
as low as –25°C.
Special brushes provided as required.
107 Motors suitable for operation in ambients
as low as –40°C.
Low temperature grease, special brushes, and high tensile strength shaft material provided as required.
108 Motors suitable for operation in ambients
as low as – 60°C.
Low temperature grease, special brushes, high tensile strength shaft material, special commutator, provided as required.
BALANCE – SPECIAL
112 Grade “R”
113 Grade “S”
Standard balance is normally equivalent to vibration grade N according to DIN ISO 2373. (Rotors are dynamically balance with
inserted key.) For increased requirements on mechanical balancing, vibration grade R or S can be achieved by the addition of
these modifications. Refer to Technical Description section for limiting values of vibration velocity.
BASES
For adjusting belt tension. Bases are not suitable for wall or ceiling mounting.
121 Base-Heavy Duty – Two adjusting Bolts
125 INSULATED BEARINGS
Add for insulated bearings.
126 REINFORCED BEARING
Provides for roller bearings on drive end and special shaft on frames 180 thru 280 DC used for belted drive. Refer to the
Technical Description section for radial load capacity. Details of the drive system must accompany the order. Belted drive
applications not meeting the standard minimum sheave diameters, etc., require special pricing. Refer to Mod. 177 for mounting of
customer’s finished bore sheave.
130 BLOWER WITHOUT FILTER
Standard DC ratings are based on pipe-ventilation with the motor cooled by customer supplied air with the air inlet on the nondrive side (commutator side) and the outlet air leaves the motor via the louvres on the drive side. Note: For the 280 frame, air
inlet is at the drive end and air outlet is at the opposite drive end. Addition of this modification BLOWER WITHOUT FILTER –
provides a blower mounted on the non-drive side. The blower is mounted on top or to one side. Since the blower motor operates
at constant speed the cooling air is independent of DC motor speed.
To insure adequate protection against cooling air loss, protective devices, e.g. thermistors, thermostats or air pressure switch are
recommended.
The AC blower motor is rated 380–420 volts/50 Hz. For other blower motor ratings, add as follows:
130A 440–480 VOLTS/60 HZ
Standard for frames 112–160
Other Special Voltages
Refer to Application Engineer – Baldor Electric Company
121
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Modifications
Mod.
No. Modification
131
FILTER ADDITION
Filter Addition for DPG-FV motor with motor mounted blower. Filter is washable type. Recommended when filterable contaminates
are present. Totally enclosed construction rather than blower with filter is recommended for extremely dusty, dirty locations.
AIR PRESSURE SWITCH – TYPE 625 – Mounted on motor bracket at air inlet end
Monitors pressure inside of motor to actuate SPDT switch when pressure drops below preset value giving an immediate indication
that the air supply to the motor is reduced. Applicable to forced ventilated motors with either motor mounted blower or separately
forced ventilated by customer supplied air. Since motors dependent on force ventilation will have a rapid rise in temperature after
the air supply is interrupted, the customer must take immediate corrective action when the switch trips.
Pressure switch is of single pole design for 220 volts. 1 amp provided with n.o. and n.c. contacts.
134 Type 625 – Switch with standard enclosure – motor mounted
BRACKETS – Type of Construction IEC D-flange with standard dimensions.
140 IM B35(B3/B5) D-Flange
IM V1 (Vert Shaft Down with D-Flange)
Others
Refer to Application Engineer – Baldor Electric Company
150 BRAKE MOUNTING
Standard Brakes
Non-Standard Brakes
Refer to Application Engineer – Baldor Electric Company
150A Single Disc Brakes (STROMAG)
Does not include mounting.
Add for Mounting Brake – See Modification 150.
Type
Supply
SMB5
SMB10
SMB20
SMB30
24 or 90 V. DC
24 or 90 V. DC
24 or 90 V. DC
24 or 90 V. DC
Torque Range
NM
Up to 50
60 to 100
130 to 200
240 to 265
150B Brake Modifications for Brakes in Mod 150A.
Adjustable Torque
Type SMB5
Type SMB10
Type SMB20
Type SMB30
Micro Switch
Rectifier for Operation on 230 V 50 Hz
Manual Release
BRUSH WEAR SENSOR
155A Non-Potential Free – Add for ESP™ brushes and current isolation network installed
in motor with special leads terminated in a conduit box. (1)
Provides output from motor when brushes wear to a predetermined length.
Frames 112–180
Signal gives indication of brush wear so that corrective action may be taken
Frames 200–250
to prevent malfunction of the motor and possible damage to the commutator
Frame 280
from worn brushes. The voltage signal is the same magnitude as the motor
armature voltage.
(1) NOTE: Does not include control monitor. Signal return isolation network is usually mounted in control cabinet but may be
mounted in motor conduit box when specified for an additional adder.
155B Potential Free – Two brushholders with microswitch
Frames 112–180
Frames 200–250
Frame 280
156 BRUSHES AND BRUSHHOLDERS FOR AGGRESSIVE ATMOSPHERES
122
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Modifications
Mod.
No. Modification
177
COUPLING – MOUNTING ON MOTOR
Mounting of customer’s finished bore coupling on motor shaft.
Finished bore coupling must be received at plant five weeks prior to shipment with customer property tag attached.
178 Mounting of customer’s unfinished
bore coupling on motor shaft.
Unfinished bore coupling must be received at plant five weeks prior to shipment with customer property tag attached.
ENCLOSURES
183 SEPARATELY VENTILATED IC 17 IC37
Standard
183A IP55, Dust-Tight Features Additional seals and gaskets
FIELD WINDINGS
224 Series Field
WARNING: Series wound motors must be solidly connected to the driven machine and never
operated without load to avoid possible destructive high speeds. The speed of a series motor is
defined only at rated load.
226 Second Shunt Field
FINISH
240 Special Color
Special color. Refer to General Information Section for description of standard finish.
241 Improved Corrosion Protection
GEAR BOX
Refer to Application Engineer – Baldor Electric Company.
244 MOUNTING OF CUSTOMER SUPPLIED GEAR BOX Add Mod. 244 plus D-Flange, special shaft, Lip Seal, etc. as required.
SHAFT MODIFICATIONS
269 Standard Non-Drive End Shaft
Commutator end extension having dimensions per the standard dimension sheets.
NOTE: Not for suitable tandem motor operation. If tandem motors are required, contact Baldor Electric.
269A Non-Drive End NEMA
271 Shaft Guard
Provides a protective cover over front end shaft extensions.
WARNING: To prevent injury, shaft guard must be specified or supplied by customer for exposed
shaft extensions.
272
272A
273
274
Special Shaft Diameter – Drive End
Drive End NEMA – n.e.ch.
Special Shaft Diameter – Opposite Drive End
Special Shaft Length
Non-standard length for either drive end or opposite drive end shaft (use twice modification adder for non-standard length on
both ends). Maximum length limited to two times standard length.
CAUTION: Belted drives using smaller than standard diameter shafts and/or longer than standard
shafts must be referred to Baldor Electric with complete belt drive data.
275
276
Shaft – Lip Seal
This modification provides a lip seal on the drive end to protect the bearing when operated with oil splashing against the shaft.
Typical application is on a horizontal motor mounted to a gear case where the stationary oil level is below the motor shaft. Seals
operated dry for extended periods will be damaged.
Shaft – Face Seal
This modification provides a face seal on the drive end to protect the bearing when operated with a head of oil against the shaft.
Typical application is a vertical shaft-up motor connected to a gear case with oil against the motor shaft. Seals operated dry for
extended periods will be damaged.
123
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Modifications
Mod.
No. Modification
277
278
279
280
317
355
355A
356
359
544
545
546
560
561
—
Shaft Step
Each step or reduced diameter from standard straight shaft. Thread modification No. 278 is usually required with this Mod.
Shaft Threads
Class 2A right hand thread of size compatible with shaft diameter. Step modification No. 277 is usually required with this Mod.
Shaft Tapered
Provides standard NEMA AC shaft tapered 1-1/4 inches per foot. May be added for either drive end or opposite drive end shaft
extension. Includes threads, washer and locknut. Specify “U” or “FU” required.
SPACE HEATERS
Mounted inside the motor. Recommended to prevent condensation of moisture for motors remaining unenergized for long periods
of time. Standard heater is single-phase 220-240 volts, 50/60 Hz. Leads are terminated in motor conduit box. Refer to Technical
Description section for space heater ratings.
TACHO MOUNTING PROVISIONS ONLY
Standard for above mentioned tachos including stub shaft, adapter, coupling.
DC TACHO GENERATOR INCLUDING MOUNTING
TDP O,2LT-4 (HUBNER)
DC TACHO GENERATOR/SPEED LIMIT
SWITCH – COMBINATION TDP0-2LT-4
WITH INTEGRAL OVERSPEED
SWITCH – n = 1950 RPM (HUBNER)
BALDOR XPYII 60/1000 RPM
DC TACHO GENERATOR
(BEARINGLESS, BRACKET MOUNTED) MOUNTING INCL.
TDP0,51/42
REPLACED BY GTR 9.16L/420 (HUBNER)
RESOLVER, MOUNTING INCL.
800123-2R
ENCODER, MOUNTING INCL.
HOHNER 3000 (SERIES 30)
OPTICAL ENCODER, MTG INCL.
HEIDENHAIN ROD 436
1000, 1024 OR 2048 PPR
DYNAPAR HS35R
Direct shaft mounted, hollow shaft, sealed (IP66)
No coupling or adapter required
with MS connector, bidirectional
(Quadrature), Differential output, with
marker pulse. PPR: 512, 1024, 2048,
4096. Max 5–26 volt, single output.
Litton G71 encoder
MS connector, bi-directional (quadrature)
differential output marker pulse, 5 volt or 8–30 volt, single output, IP64.
Non-Standard Tachos
Refer to Application Engineer – Baldor Electric Company
124
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Modifications
Mod.
No. Modification
MOTOR OVERTEMPERATURE PROTECTION
Overtemperature protection of the various windings in a direct-current motor, especially the armature winding which rotates,
is considerably complex. The wide range of load and speed (ventilation) in the typical direct-current motor application adds to
the difficulty. Current-sensing devices located remotely from the motor (frequently in control panels) cannot match the thermal
characteristics of direct-current motors over a wide speed range because of these variable motor cooling conditions. Baldor
Electric offers several modifications to protect the DC motor against overtemperature operation as follows: (Refer to each
modification for complete description and limitations.)
Mod. No.
Modification
Application
410
High Limit Thermostat on Intercoil
Minimum protection recommended. See Mod. for limitations.
411
Warning Thermostat on Intercoil
Useful as a warning signal that motor is approaching maximum
temperature. Time between actuation of “WARNING” thermostat
and “HIGH LIMIT” thermostat depends on operating conditions
and cannot be predetermined.
132/133
Air Pressure Switch
Recommended for all forced-vent, separate-vent, and totally
enclosed dual cooled motors to give immediate indication of
reduction in air flow. Refer to page C-3 for pricing.
412/413/414
Thermistors on Intercoil
Provides protection similar to thermostat but generally gives
better indication of winding temperature since, being a smaller
device, it can make better thermal contact with the windings.
Refer to MOD. 410 for limitations on protection under various
load/speed conditions. Requires separate control module.
415/416/417
Thermistors on Main Field Winding
Gives indication of excessive field heating that may be caused by
high field supply voltage, loss of cooling air or operation of self
cooled motors at low speed, high armature current conditions.
Requires separate control module.
418
Resistance Temperature
When used with separate instrument provides analog indication
of intercoil temperature.
Detector on Intercoil
Recommended on large motors in conjunction with thermostat or
thermistors.
HIGH LIMIT THERMOSTAT ON INTERCOIL – with leads brought into the standard conduit box.
410
The thermostat normally closed contact is suitable for use in control circuits rated 120–500 volts AC, 1100 volt-amps.
Protects Against
• High load operation of force ventilated (IC06) motors at all speeds except very low speeds.
• High load operation of IC410 (TENV) motors.
• Operation in extremely high ambient temperatures.
• After a time delay, gives indication of complete loss of cooling air.
Advantages
• Low cost.
• Operates directly into control circuit.
Disadvantages
• Size of unit makes placement of windings critical to obtain good thermal contact.
• Does not provide dependable protection on force ventilated motors with overloads at low motor speeds. At low speeds the
heat dissipating ability of the armature is reduced due to decrease in armature velocity while the heat dissipating ability of the
stationary intercoil, where the thermostat is located, remains constant.
• Since intercoil thermal time constant is typically five times longer than the armature thermal time constant, extremely high
short-term armature overloads may damage the armature before the thermostat trips or permit the motor to be operated at
higher than normal rated temperature rise resulting in less than normal motor insulation life. Other load limiting devices in the
control-thermal overload relays or instantaneous over-current relays must be used to protect the motor.
125
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Modifications
Mod.
No. Modification
411 WARNING THERMOSTAT ON INTERCOIL
For motor warning thermostat with N/C contacts,
(Refer to MOD. 410 for contact rating)
(MOD. 410 must also be added with this MOD.)
Provides low temperature thermostat on the intercoil with leads brought into the standard conduit box. This thermostat, selected
to trip approximately 15°C below the high limit thermostat, may be used as a warning signal to indicate the intercoil temperature
is approaching a high temperature. The same advantages and limitations as outlined in MOD. 410 apply to this thermostat. Under
certain operating conditions – extremely low speed operation of forced ventilated motor or extremely high short-term overloads –
the motor may be damaged before the high limit thermostat trips. If the condition of the overload is determined to be due to these
operating conditions, the tripping of the warning thermostat should be used to shut down the drive, thus preventing possible
damage to the motor by continued operation. In actual operation, the exact cause of the low temperature thermostat tripping may
be difficult to determine although tripping of this warning thermostat can be used as a signal to check drive operation.
NOTE: The usefulness of a warning thermostat is limited since the time between activation of the warning thermostat is a
function of load, ambient temperature, and other factors and cannot be predetermined.
THERMISTORS
(Quantity 3) 2 on intercoil and 1 on field coil.
Offers the same functional protection as a thermostat but with the advantage of a smaller solid state sensing device to obtain
better thermal contact with windings. The PTC thermistor bonded to the intercoil provides an approximate 20:1 increase in
resistance when it reaches its trip temperature. This change in resistance is detected by an electronic module external to the
motor. Module must be priced separately.
Protection limitations for thermistors are similar to thermostat for various operating conditions. Refer to MOD. 410.
412 HIGH LIMIT THERMISTORS
413 WARNING THERMISTORS
THERMISTORS
• (Quantity 3) 2 on intercoil and 1 on field coil.
• Additional protection can be obtained by monitoring main field winding temperature with thermistors. Possible causes of
excessive field temperature are as follows:
1. Loss of cooling air on motors designed for forced ventilation as standard.
2. High field voltage over 110% rated.
• The PTC thermistor bonded to the field winding provides an approximate 20:1 increase in resistance when it reaches its “Trip”
temperature. This change in resistance is detected by an electronic module external to the motor. Module must be priced
separately.
418 RESISTANCE TEMPERATURE DETECTOR (RTD) –
For 100 ohm 3-wire platinum Resistance Temperature Detector
mounted on intercoil
mounted on intercoil with leads wired to terminal board in conduit box.
This modification provides a 100 ohm RTD on the intercoil winding to permit monitoring the intercoil winding temperature with a
customer supplied instrument giving an analog indication of intercoil thermal rise. This information is useful in checking intercoil
temperature; however, the same limitations on relating this temperature to actual temperature apply with an RTD as with a
thermostat (See Mod. 410).
440 Vibration Proved Design
For motors exposed to above normal shock or vibration. Modification provides special wire and banding, TIG welded
commutators, extra dips and bakes, and lock washers on bolts.
126
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Modifications
Mod.
No. Modification
450
451
452
453
TESTS
Routine Test – Certified copy of Test Report – This modification provides up to five (5) copies of the certified test report
containing the data on the standard routine test per IEEE Standard 113 that is given each motor. This test provides assurance that
the motor meets design specifications. The routine test consists of:
1. Neutral check
2. Shunt field wiring resistance check
3.Commutation check
4. High potential check
5.Motor operation under following conditions with speed, voltage and current checked
a. No load at rated voltage at base speed and maximum field weakened speed
b. Full load at rated voltage at base speed and maximum field weakened speed
Note: All motors are subjected to routine test; however, test data is not recorded and submitted to customer unless this
modification is specified.
Witnessed Routine Test – The routine test described above to be witnessed by customer. Customer will be notified
approximately 2 days before motor is ready for test. Includes six certified copies of test report.
Witnessed Routine Test – GK112 thru GK180
Witnessed Routine Test – GK200 thru GK250
Witnessed Routine Test – GK280
Performance Test – Provides complete motor performance test and heat run on dynamometer with motor horsepower, speed,
torque and efficiency recorded as a function of armature current up to 150% of rated armature current. Includes six certified
copies of test report.
Performance Test – GK112 thru GK180
Performance Test – GK200 thru GK250
Performance Test – GK280
Witnessed Performance Test – Performance test witnessed by customer. Customer will be notified approximately 2 days
before motor is ready for test. Includes six (6) certified copies of test report.
Witnessed Performance Test – GK112 thru GK180
Witnessed Performance Test – GK200 thru GK250
Witnessed Performance Test – GK280
127
IEC VARIABLE SPEED DC MOTORS INTEGRAL HP
Modifications
Mod.
No. Modification
128
Contact your nearest Baldor District Office at these
World Wide locations, or visit www.baldor.com
UNITED STATES
ARIZONA
PHOENIX
4211 S 43RD PLACE
PHOENIX, AZ 85040
PHONE: 602-470-0407
FAX: 602-470-0464
ARKANSAS
CLARKSVILLE
1001 COLLEGE AVENUE
CLARKSVILLE, AR 72830
PHONE: 479-754-9108
FAX: 479-754-9205
CALIFORNIA
LOS ANGELES
6480 FLOTILLA STREET
COMMERCE, CA 90040
PHONE: 323-724-6771
FAX: 323-721-5859
IOWA
DES MOINES
1800 DIXON STREET, SUITE C
DES MOINES, IA 50316
PHONE: 515-263-6929
FAX: 515-263-6515
MARYLAND
BALTIMORE
6660 SANTA BARBARA RD.
SUITES 22-24
ELKRIDGE, MD 21075
PHONE: 410-579-2135
FAX: 410-579-2677
MASSACHUSETTS
BOSTON
6 PULLMAN STREET
WORCESTER, MA 01606
PHONE: 508-854-0708
FAX: 508-854-0291
HAYWARD
21056 FORBES AVENUE
HAYWARD, CA 94545
PHONE: 510-785-9900
FAX: 510-785-9910
MICHIGAN
DETROIT
5993 Progress Drive
STERLING HEIGHTS, MI 48312
PHONE: 586-978-9800
FAX: 586-978-9969
COLORADO
DENVER
3855 Forest Street
Denver, CO 80207
PHONE: 303-623-0127
FAX: 303-595-3772
MINNESOTA
MINNEAPOLIS
21080 134TH AVENUE NORTH
ROGERS, MN 55374
PHONE: 763-428-3633
FAX: 763-428-4551
CONNECTICUT
WALLINGFORD
65 SOUTH TURNPIKE ROAD
WALLINGFORD, CT 06492
PHONE: 203-269-1354
FAX: 203-269-5485
MISSOURI
ST LOUIS
13678 Lakefront Drive
Earth City, MO 63045
PHONE: 314-373-3032
FAX: 314-373-3038
FLORIDA
TAMPA/PUERTO RICO/
VIRGIN ISLANDS
3906 EAST 11TH AVENUE
TAMPA, FL 33605
PHONE: 813-248-5078
FAX: 813-247-2984
GEORGIA
ATLANTA
62 TECHNOLOGY DRIVE
ALPHARETTA, GA 30005
PHONE: 770-772-7000
FAX: 770-772-7200
ILLINOIS
CHICAGO
340 remington blvd.
BOLINGBROOK, IL 60440
PHONE: 630-296-1400
FAX: 630-226-9420
INDIANA
INDIANAPOLIS
5525 W. MINNESOTA STREET
INDIANAPOLIS, IN 46241
PHONE: 317-246-5100
FAX: 317-246-5110
KANSAS CITY
1501 BEDFORD AVENUE
NORTH KANSAS CITY, MO 64116
PHONE: 816-587-0272
FAX: 816-587-3735
NEW YORK
AUBURN
ONE ELLIS DRIVE
AUBURN, NY 13021
PHONE: 315-255-3403
FAX: 315-253-9923
NORTH CAROLINA
GREENSBORO
1220 ROTHERWOOD ROAD
GREENSBORO, NC 27406
PHONE: 336-272-6104
FAX: 336-273-6628
OHIO
CINCINNATI
2929 CRESCENTVILLE ROAD
WEST CHESTER, OH 45069
PHONE: 513-771-2600
FAX: 513-772-2219
© Baldor Electric Company
BR608
CLEVELAND
8929 FREEWAY DRIVE
MACEDONIA, OH 44056
PHONE: 330-468-4777
FAX: 330-468-4778
OKLAHOMA
TULSA
7170 S. Braden, Suite 140
Tulsa, OK 74136
PHONE: 918-366-9320
FAX: 918-366-9338
OREGON
PORTLAND
20393 SW AVERY COURT
TUALATIN, OR 97062
PHONE: 503-691-9010
FAX: 503-691-9012
PENNSYLVANIA
PHILADELPHIA
1035 THOMAS BUSCH
MEMORIAL HIGHWAY
PENNSAUKEN, NJ 08110
PHONE: 856-661-1442
FAX: 856-663-6363
PITTSBURGH
159 PROMINENCE DRIVE
NEW KENSINGTON, PA 15068
PHONE: 724-889-0092
FAX: 724-889-0094
TENNESSEE
MEMPHIS
4000 WINCHESTER ROAD
MEMPHIS, TN 38118
PHONE: 901-365-2020
FAX: 901-365-3914
TEXAS
DALLAS
2920 114th Street Suite 100
Grand Prairie, TX 75050
PHONE: 214-634-7271
FAX: 214-634-8874
HOUSTON
10355 W. Little York ROAD
Suite 300
Houston, TX 77041
PHONE: 281-977-6500
FAX: 281-977-6510
UTAH
SALT LAKE CITY
2230 SOUTH MAIN STREET
SALT LAKE CITY, UT 84115
PHONE: 801-832-0127
FAX: 801-832-8911
WISCONSIN
MILWAUKEE
1960 SOUTH Calhoun Road
NEW BERLIN, WI 53151
PHONE: 262-784-5940
FAX: 262-784-1215
INTERNATIONAL SALES
FORT SMITH, AR
P.O. BOX 2400
FORT SMITH, AR 72902
PHONE: 479-646-4711
FAX: 479-648-5895
CHINA
160 Song SHENG road
Songjiang INDUSTRY ZONE
Shanghai 201613, China
PHONE: +86 21 5760 5335
Fax : +86 21 5760 5336
CANADA
EDMONTON, ALBERTA
4053-92 STREET
EDMONTON, ALBERTA T6E 6R8
PHONE: 780-434-4900
FAX: 780-438-2600
GERMANY
Hermann-Heinrich-Gossen-STRASSE 3
KÖln, D-50858 Germany
Phone: +49 2234 37941-0
Fax: +49 2234 3794164
TORONTO
OAKVILLE, ONTARIO
2750 COVENTRY ROAD
OAKVILLE, ONTARIO L6H 6R1
PHONE: 905-829-3301
FAX: 905-829-3302
MONTREAL, QUEBEC
5155 J-ARMAND Bombardier
SAINT-Hubert, Québec
Canada J3Z 1G4
PHONE: 514-933-2711
FAX: 514-933-8639
VANCOUVER,
BRITISH COLUMBIA
1538 KEBET WAY
PORT COQUITLAM,
BRITISH COLUMBIA V3C 5M5
PHONE 604-421-2822
FAX: 604-421-3113
WINNIPEG, MANITOBA
54 PRINCESS STREET
WINNIPEG, MANITOBA R3B 1K2
PHONE: 204-942-5205
FAX: 204-956-4251
AUSTRALIA
UNIT 3, 6 STANTON ROAD
SEVEN HILLS, NSW 2147, AUSTRALIA
PHONE: (61) (2) 9674 5455
FAX: (61) (2) 9674 2495
UNIT 8, 5 KELLETTS ROAD
ROWVILLE, VICTORIA, 3178
AUSTRALIA
PHONE: (61) (3) 9753 4355
FAX: (61) (3) 9753 4366
el salvador
RESIDENCIAL PINARES DE SUIZA
POL. 15 #44,
NVA. SAN SALVADOR, EL SALVADOR
PHONE: +503 2288-1519
FAX: +503 2288-1518
CHILE
Luis Thayer Ojeda 166,
of 402 - Providencia
Santiago, Chile
Phone: +56 2 964-3210
DIESELSTRASSE 22
KIRCHHEIM, D-85551
MUNICH, GERMANY
PHONE: +49 89 90508-0
FAX: +49 89 9050886
INDIA
Office No 517 & 518,
5th Floor, Siddharth Towers,
CTS no. 421 (1), Survey no 12,
Kothrud, Pune 411 038,
Maharashtra, India
PHONE: + 91 20 25 45 27 17
FAX: + 91 20 25 45 27 19
INDonesia
Talavera Office Park,
28th Floor, Suite M18
JI. T.B. Simatupang, Kav. 22-26
Cilandak, Jakarta Selatan, 12430
Indonesia
PHONE: +62 21 75 999 879
FAX: + 62 21 75 999 878
ITALY
Via Sottobisio 30
CH-6828 Balerna
SWITZERLAND
Phone: +41 91 683 6161
Fax: +41 91 630 2633
JAPAN
DIA BLDG 802,
2-21-1 TSURUYA-CHO,
KANAGAWA-KU
YOKOHAMA, 221-0835, JAPAN
PHONE: 81-45-412-4506
FAX: 81-45-412-4507
KOREA
Rm#1715, Suseo Tower, 725,
Suseo-dong, Gangnam-gu,
Seoul 135-757 Korea
PHONE: (82) 2 2226 9369
Fax: (82) 2 2226 9368
MIDDLE EAST & NORTH AFRICA
VSE INTERNATIONAL CORP.
3233 n arlington heights road
suite 100w
arlington heights, IL 60004 usa
PHONE: 847 590 5547
FAX: 847 590 5587
PANAMA
AVE. RICARDO J. ALFARO
EDIFICIO SUN TOWERS MALL
PISO 2, LOCAL 55
Ciudad de Panamá, Panamá
PHONE: +507 236-5155
Fax: +507 236-0591
SINGAPORE
18 KAKI BUKIT ROAD 3, #03-09
ENTREPRENEUR BUSINESS CENTRE
SINGAPORE 415978
PHONE: (65) 6744 2572
FAX: (65) 6747 1708
SWITZERLAND
POST FACH 73
SCHUeTZENSTRASSE 59
FEUERTHALEN, CH-8245
SWITZERLAND
PHONE: +41 52 647 4700
FAX: +41 52 659 2394
TAIWAN
1F, No 126 Wenshan 3rd Street,
Nantun District,
Taichung City 408
Taiwan R.O.C
PHONE: (886) 4 238 04235
FAX: (886) 4 238 04463
UNITED KINGDOM
6 BRISTOL DISTRIBUTION PARK
HAWKLEY DRIVE
BRISTOL BS32 0BF U.K.
PHONE: +44 1454 850000
FAX: +44 1454 859001
Venezuela
Av. Roma. Qta el Milagro. Urb.
California Norte
Caracas, 1070
Venezuela
Phone/fax: +58 212 272 7343
mobile: +58 414 114 8623
MEXICO
LEON, guanajuato
KM. 2.0 BLVD. AEROPUERTO
LEÓN 37545, GUANAJUATO, MÉXICO
PHONE: +52 477 761 2030
FAX: +52 477 761 2010
Baldor Electric Company
P.O. Box 2400
Fort Smith, AR 72902-2400 U.S.A
Ph (479) 646-4711 • Fax (479) 648-5792
International Fax (479) 648-5895
www.baldor.com
Printed in U.S.A.
11/11 TCP 15,000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement