Campomatic | WM608 | Instruction manual | Campomatic WM608 Instruction manual

Front Load Washing Machine Instruction Manual
MODEL:
WM950XE
Please read this instruction manual carefully before you use this product
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Control Panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
What to do if ... _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Electrical connection_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Environmental concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Repair and After-sales Service_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2
4
5
7
8
9
9
10
12
15
17
18
19
19
20
Safety information
Important! Read carefully & keep for future reference.
• The safety of your appliance complies with the industry standards and with legal requirements on the safety
of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes.
• It is most important that this instruction book should be retained with the appliance for future reference.
Should the appliance be sold or transferred to another owner, or should you move house and leave the
appliance, always ensure that the book is supplied with the appliance in order that the new owner can
get to know the functioning of the appliance and the relevant warnings.
• You MUST read them carefully before installing or using the appliance.
• Before first starting up, check the appliance for any damage incurred during transport. Never connect up a
damaged appliance . If parts are damaged, contact your supplier.
• If the appliance is delivered in the winter months when there are minus temperatures, store it at room
temperature for 24 hours before using for the first time.
General safety
• It is dangerous to alter the specifications or attempt to modify this product in any way.
• During high temperature wash programmes the doorglass may get hot. Do not touch it!
• Make sure that small children and pets do not climb into the drum.To avoid this, please check into the drum
before using.
• Any objects such as coins, safety pins, nails, screws,stones or any other hard, sharp material can cause
extensive damage and must not be placed into the machine.
• Only use the advised quantities of fabric softener and detergent. Damage to the fabric can ensue if you overfill. Refer to the manufacturer’s recommendations of quantities.
• Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible
for such items to slip down between the tub and the inner drum.
• Do not use your washing machine to wash articles with whalebones, material without hems or torn material.
• Always unplug the appliance and turn off the watersupply after use, cleaning and maintenance.
• Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by
inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre.Always
insist on genuine spare parts.
2
Installation Instruction
Before the operation
• This appliance is heavy. Care should be taken when moving it.
• When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service
Centre.
• All packing and transit bolts must be removed before use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section in the user manual.
• After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop
is not pressing the electrical supply cable against the wall.
• If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely
under the appliance.
• Always be sure, that there is no water leakage from hoses and their connections after the installation.
• If the appliance is installed in a location subject to frost, please read the “dangers of freezing” chapter.
• Any plumbing work required to install this appliance should be carried out by a qualified plumber or
competent person.
• Any electrical work required to install this appliance should be carried out by a qualified electrician or
competent person.
Use
• This appliance is designed for domestic use. It must not be used for purposes other than those for which it
was designed.
• Only wash fabrics which are designed to be machine washed.Follow the instructions on each garment label.
• Do not overload the appliance. See the Washing Programme Table.
• Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed
or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must
NOT be machine washed.
• Garments which have been in contact with volatile petroleum products should not be machine washed.
• If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment
before placing in the machine.
• Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.
• Never use the appliance if the power supply cable, the control panel, the working surface or the base are
damaged so that the inside of the washing machine is accessible.
Child safety
• This appliance is not intended for use by person (including children) with reduced physical sensory or mental
capabilities or lack of experience and knowledge unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of
suffocation! - Keep them out of children’s reach!
• Keep all detergents in a safe place out of children’s reach.
• Make sure that children or pets do not climb into the drum. To prevent children and pets becoming trapped
inside the drum this machine incorporates a special feature.
3
Product description
The detergent
compartment
The control panel
Quick Guide
1. Install the washing machine
2. Load the laundry
3. measure out the detergent
Basket
Door handle
4. Close the machine door
5. Put down (hang up) the drain pipe
6. Turn on the water tap
7. Plug the power supply
8. Select the desired programme
Service panel
9. Press the [start/pause] key
«MAX»
Detergent dispenser drawer
I Compartment for detergent used for prewash and soak
phase or for stain remover used during the stain action
phase (if available). The prewash and soak detergent is
added at the beginning of the wash programme. The
stain remover is added during the stain action phase.
II Compartment for powder or liquid detergent used for main
wash. If using liquid detergent pour it just before starting
the programme.
Compartment for liquid additives (fabric softener, starch).
Follow the product manufacturer’s recommendations on
II
quantities to use and do not exceed the «MAX»
Main wash detergent
mark in the detergent dispenser drawer. Any fabric
softener or starching additives must be poured into the
compartment before starting the wash programme.
4
I
Pre-wash detergent
Special additive
Control panel
1
( RPM )
Kidswear
High
0
(1200) Misty Washing
Mid
8
(900)
Low
Underwear
Extra ----No-Spin
Rinse
Water Level
Temp.
Function
Spin Speed
Child Lock
11
9
10
1 LED screen display
Heavy
Synthetics
Mixed
Wool
Power
8
7
Silk
Self-clean
Wash
Rinse&Spin
Drain&Spin
6
Start/
Pause
5
6 Function
2 Misty Washing
7 SPIN SPEED button
3 Programme button
8 TEMPERATURE button
4 POWER button
9 WATER LEVEL button
5 START/PAUSE button
Quick Wash
Color
Active
Enzyme
Smart-----
Delay
Cotton
Pre-Wash
Tiny
Add Garment
4
3
2
10 DELY button
11 ADD GARMENT button
LED screen display
•Only light (pre-wash, wash, rinse, spin) relevant to the phase that is currently being carried out will remain lit
during the washing process.
•The delay start light will flash to indicate the delay time. It will start the programme after 【xx】hours.
•After the wash procedure begins, 【REMAIN】will be lightened, to display the remaining time, that is , the
wash closes in【xx】time.
•When the child lock function is selected,【CHILD LOCK】will be lightened.
•When the door is at the lock state, 【DOOR LOCK】 will be lightened. The door can be opened only after
the light turned off.
Misty Washing
• Injects the full atomization water into the basket during high-speed dehydration process, it not only washes
the clothes cleaner,also rinses more thorough.
PROGRAMME selector button
• So your clothes have a more efficient and clean wash different wash cycles can be selected depending on
the users needs.
Power button
•<<Power>>button,has the start function,When this button is pressed continuously,this machine is switched start.
START/PAUSE button
• <<Start/Pause>> button, has the start and pause function. When this button is pressed continuously, this
machine is switched between start and pause.
Function button
• In order to get better care of your clothes you can select the extra rinse or pre wash function
WATER LEVEL button
•You can select according to the soil level of the laundry.
5
SPIN SPEED button
By pressing this button you can change the spin speed of the selected programme or to select Rinse Hold option.
TEMPERATURE button
This button is used to adjust the wash temperature.You can select different water temperature or no heating by
pressing the button repeatedly.
DELAY button
This button is used for delay wash.You can get 0-24 hours through pressing this key contimously. The delay
time means the wash will begin in 《xx》hours.
ADD GARMENT button
<<Add garment<<This operation can be executed during the washing procedure. When the basket of the
washing machine is still rolling and there is large amount of water with high temperature in the
basket. The state is unsafe and the door cannot be opened forcefully. To press《start/pause/add
garment》, and start the clothes adding in the midway function. Please follow the steps bellow:
The door lock is unlocked
aded and repressed the《start/pause/add garmen》button
Additional child lock.
• There is an additional, selectable child safety feature. To select it, press button 6+ button 7 for three
seconds. The Child Lock button also locks the Start/Pause button. An English text and the image of the head
of a child appear in the display when the lock is activated.
• You can now also press the Pause button without anything happening.
There will just be an error beep. When the programme has finished, the door can be opened, but to select the
next wash you need to press the button 6+ button 7 once more to cancel the child lock.
Turning the machine off and then on again will not cancel the child lock, so it can be left permanently locked.
6
Optional
Optional
10
4
3.5
3
1000
800
800
600
95
60
40
30
95
Heavy
Synthetics
Wool
Silk
Wash
60
95
Active
enzyme
Self-clean
1000
600
10
It means to add the detergent or the softener when it is needed.
It means the detergent or the softener cannot be added.
Must
Optional
Optional
Non-optional
Non-optional
Optional
Optional
Optional
Optional
Optional
Optional
Non-optional
Optional
Optional
Optional
Optional
Optional
Non-optional
Non-optional
Non-optional
Non-optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Non-optional
Optional
Misty
Wash
×
×
×
×
×
×
×
0:14
0:57
1:52
1:02
0:53
The clothes that only
need the bleaching wash
No any detergent
Comparatively dirty
clothes
Ordinary clothes
Except wool and silk clothes
Intimate clothes
Children's underwear
1:02
1:35
The clothes after
the hand wash
The clothes that only
need the single wash
Silk clothes
Wool fleece clothes
Chemical fiber clothes
fading clothes
Not so dirty clothes
Ordinary clothes
Clothes to be
washed (suggestion)
0:08
0:33
0:36
×
0:57
3:01
0:24
1:23
10KG
0:45
×
Softener
Default operation time
×
×
I Pre-wash IIMain wash
detergent box
It means it is necessary to add the detergent,or the wash effect cannot be reached.
Non-optional
Non-optional Non-optional
Optional
Optional
Optional
Optional
Optional
Non-optional
Optional
Non-optional
Non-optional
Optional
Optional
Non-optional
Optional
Smart
Wash
!The operation time of the wash machine will change with the variance of the water temperature, water level, clothes, inlet water pressure and drain state.
×
Energy test program:Heavy 60 C
Rinse & Spin
10
1000
60
Mixed
4
4
1000
40
Color
1000
Optional
4
1000
95
Underwear
Optional
Optional
10
1000
Non-optional
10
1000
60
Non-optional
10
Optional
Kidswear
Drain & Spin
Optional
4
1000
40
Quick
Optional
Optional
10
Extra Rinse Pre-Wash
1000
10Kg
1000
Maximum spin speed The maximum washing
(RPM) capacity (kilogram)
95
Maximum
temperature
(Centigrade)
Cotton
Cycle
Fabric
Programme table
7
Helpful hints and tips
Sorting out the laundry
Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the
laundry as follows: whites, coloureds, synthetics, delicates, woollens.
Before loading the laundry
Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash.
New coloured items may run in the first wash; they should therefore be washed separately the first time.
Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or detergent paste.
Treat curtains with special care. Remove hooks or tie them up in a bag or net.
Removing stains
Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to
washing.
Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then
rub in the soap and water.
Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat
several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the
fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which
are not recent since the cellulose structure will already have been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and fast coloureds only).
Ball point pen and glue: moisten with acetone*, lay the garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Treat any residual
marks with bleach.
Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual
marks with bleach.
Ink: depending on the type of ink, moisten the fabric first with acetone, then with acetic acid. Treat any
residual marks on white fabrics with bleach and then rinse thoroughly.
Tar stain: first treat with stain remove, methylated spirits or benzine ,then rub with detergent paste.
Quantity of detergent to be used:
The type and quantity of detergent will depend on the type of fabric,load size,degree
of soiling and hardness of the water used.
Follow the product manufactures’ instructions on quantities to use.
Use less detergent if:
• you are washing a small load
• the laundry is lightly soiled
• large amounts of foam form during washing.
• do not use acetone on artificial silk.
Degrees of water hardness
Water hardness is classified in so-called «degrees» of hardness. Information on hardness of the water
in your area can be obtained from the relevant water supply company, or from your local authority. If
the water hardness degree is medium or high we suggest you use a water softener, following the
manufactures instructions.
When the degree of hardness is soft, re-adjust the quantity of the detergent.
8
First Use
• Ensure that the electrical and water connections comply with the installation instructions.
• Remove any material from the drum.
• Run a cotton cycle at the highest temperature without any laundry in the machine, to remove any
manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash
compartment and start the machine.
Personalization
Acoustic signals
The machine is provided with an acoustic device, which sounds in the following cases:
• at the end of the cycle
• if there is a fault.
It is not possible deactivate the acoustic signal.
Child safety lock
This device permits you to leave the appliance unattended so you do not need to worry that children might be
injured by or cause damage to the appliance. This function remains enabled also when the washing machine is
not working.
You can activate it as follow:
1.Press button 4 to start the washing programme.
2.Press button 6 + button 7 for three seconds to activate the safety device.
Now, it will be impossible to change any other programme or option.
9
Daily Use
Load the laundry
Open the door by carefully pulling the door handle outwards. Place the laundry in
the drum, one item at a time, shaking them out as much as possible. Close the
door.
Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops. Measure out the amount of detergent
required, pour it into the main wash compartment or in the appropriate compartment
if the selected programme/option it requires (see more details in
«Detergent dispenser drawer»).
If required, pour fabric softener into the compartment marked (the amount used must not exceed the
«MAX» mark in the drawer). Close the drawer gently.
Select the required programme by means of the programme selector dial (3)
Turn the programme selector dial to the required programme.The selector dial can be turned either clockwise
or anticlockwise.
Turn the selector dial to position OFF to reset the programme or to switch the machine off. At the end of the
programme the selector dial must be turned to position OFF, to switch the machine off.
Important! If you turn the programme selector dial to another programme when the machine is working, the
machine will not perform the new selected programme.
Select the spin speed by pressing button 7
When selecting a programme, the appliance proposes automatically a suggested spin speed for that
programme. (See «Washing programmes» for the maximum allowed spin speed).
Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a different speed.
The relevant pilot light illuminates.
Select the available options by pressing button 6
With this button you can select an additional Prewash or an additional Rinse or both.
When this button is pressed, the corresponding pilot light illuminates. When it is pressed again, the pilot light
goes out.
Start the programme by pressing button 5
To start the selected programme, press this button. The icon illuminates to indicate that the appliance starts
operating and the door is locked. If you have chosen a delayed start, the machine will begin the countdown.
Select the Delay Start by pressing button 10
Before you start the programme, if you wish to delay the start, press this button to select the desired delay.
The selected delay time value will appear on the display for a few seconds, then the duration of the
programme will appear again. By pressing this button, the washing programme can be delayed by 1 hour up to
a maximum of 24 hours.
Select the delay start
1. Select the programme and the required options.
2. Select the delay start by pressing button 10.
3. Press button 5:
- the machine starts its hourly countdown.
- the programme will start after the selected delay has expired.
10
Cancelling the Delay Start after having started the programme:
1. Set the washing machine to PAUSE by pressing button 5.
2. Press button 10 repeatedly until the display shows 0'.
3. Press button 5 again to start the programme.
Important!
• The door will be locked throughout the delay time. If you need to open the door, you must first set the
washing machine to PAUSE by pressing button5 and wait a few minutes before opening the door. After you
have closed the door, press the same button again.
Important! The Delay Start cannot be selected with the draining programme.
Altering an option or a running programme
It is possible to change some options before the programme carries them out..Before you make any change,
you must pause the washing machine by pressing button 5. Changing a running programme is possible only
by resetting it. Turn the programme selector dial to OFF and then to the new programme position. Start
the new programme by pressing button 5 again. The washing water in the tub will be not emptied out.
Interrupting a programme
Press the button 5 to interrupt a programme which is running.
Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to OFF to cancel a programme which is running, and wait few minutes to open the
door (it is possible only if in the tub there is not water).
At the end of the programme
The machine stops automatically. The blinking zero appears on the display. If a programme or an option that
that ends with water left in the tub has been selected, the door is locked to indicate that the water must be
emptied out before opening the door.
Follow the below instructions to empty out the water:
1. Turn the programme selector dial to OFF.
2. Select the draining or spinning programme.
3. Reduce the spin speed if needed, by pressing the relevant button.
4. Press button 5.
At the end of the programme, the door is released, after few minutes, and can be opened. Turn the programme
selector dial to OFF to switch the machine off.
Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to carry out
another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant
smells.
Stand-By:
1.Once the programme has finished after a few minutes and the energy saving system will be enabled. The
brightness of the display and the indicator pilot lights are off.
2.If the appliance is switch on button in PAUSE, only the brightness of the display is off.By pressing any button
,the appliance will come out of the energy saving status.
11
Care and cleaning
Warning! You must DISCONNECT the appliance from the electricity supply, before you can carry out any
cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the
machine.
Do this separately from any laundry washing, and according to the softening powder manufacturer's
instructions.
This will help to prevent the formation of lime
deposits.
External cleaning
Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer should be cleaned regularly.
1 Press
2 Pull out at the same time
3 Clean
Flush it out under a tap, to remove any traces of accumulated powder.
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean the recess ensuring
that all washing powder residue is removed from the upper and lower part of
the recess.
Replace the drawer and run the rinse programme without any clothes in the
drum.
12
Cleaning of the filter of the drainage pump
If the machine cannot work normally or filter net of the drainage pump cannot
be cleaned, pleasefollow the methods[1] below:
1 Close the water tap
2 Disconnect the power plug
3 If necessary,wait until the water has cooled down
4 Empty the water from the pump to a container cautiously .
5 Screw the pump cover out and clean the filter
6 Install the pump cover
Pump cover
Please clean the drainage pump regularly to prevent the sundries blocking the drainage pipe.
If the machine has the emergency drainage
If the machine has the emergency drainage, please follow the methods below when the
machine cannot work normally :
1 Rotate the programme selector dial to OFF(stop) position and to close the water tap.
2 If necessary, wait until the water has cooled down.
3 Place a container on the floor, pull out the emergency emptying hose, place it into the
container.Remove its cap and wait until the remaining water naturally flows out.
Emergency drainage pipe
Drainage pipe ferrule
Pull out the emergency
Remove the cap
Turn the emergency
emptying hose
drain hose cap
If the machine doesn’t have Emergency drainage, please follow the methods[1] above .
Cleaning
of the inlet water valve
.
If the inlet water time is found to be too long, please clean the filter net of the inlet valve.
Open the filter's door
1
2
Screw the inlet water pipe out.
Clean with the tool (like the gauze
brush and etc.)
13
Warning!
When the appliance is in use and depending on the programme selected there can be hot water in the pump.
Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle,
and is empty. When replacing the cover, ensure it is securely retightened so as to stop leaks and young
children being able to remove it.
If you wash rugs, it is compulsory to inspect and clean the filter.
Cleaning the water inlet filters
Important!
If the appliance doesn't fill, takes long to fill with water, the starting button blinks yellow or the display (if
available) shows the relevant alarm (see chapter «What to do if...» for more details), check if the water inlet
filters are blocked.
To clean the water inlet filters:
• Turn off the water tap.
• Unscrew the hose from the tap.
• Clean the filter in the hose with a stiff brush.
• Screw the hose back onto the tap. Make sure the connection is tight.
• Unscrew the hose from the machine. Keep a rag nearby
because some water may flow.
• Clean the filter in the valve with a stiff brush or with the
piece of cloth.
• Screw the hose back to the machine and make sure the
connection is tight.
• Turn on the water tap.
Frost precaution or emergency emptied out
If the machine is exposed to temperatures below 0°C or if the water is not discharged, proceed as follows.
1 Pull out the plug from the power socket.
2 Turn off the water tap.
3 Unscrew the inlet hose.
4 Place a bowl on the floor and place the end of the inlet and drain hoses into it. The water should drain by
gravity into the bowl.
14
What to do if.....
Certain problems are due to lack of simple
maintenance or oversights, which can be solved
easily without calling out an engineer.
Malfunction
The washing machine does not work
Water leakage
Before contacting your local Service Centre, please
carry out the checks listed below.
Possible Cause / Solution
Close the washing machine's door.
Press the <<Start/Pause >>button.
Correctly connect the inlet water pipe.
The spin of the clothes is abnormal
There is the peculiar smell in the washing machine
Reload and distribute the laundry evenly in the drum.
No water is visible in the drum
No fault-water is under the visible area.
There is the remaining water in the
softener's box
No fault- the effect of the softener will not be affected.
The remaining detergent is left on
the clothes
Run a Self-clean cycle without any clothes.
The water-fast component of the non-phosphorus
detergent will be left on the clothes to form into spot.
Please select «Rinse&Spin» programme.
or brush away the fleck after the clothes is dried.
Turn on the water tap.
Check the selection of the procedure .
Check if the water pressure is sufficient.
The washing machine does not fill
Reconnect the water inlet pipe.
Close the washing machine’s door.
Check if the inlet water pipe is bent or blocked.
The washing machine fills and drains
at the same time.
Make sure the end of the drainage pipe is higher
than the water level inside the machine .
Check if the drainage pipe and waste have been
sealed.
The washing machine does not drain
Check if the drainage pumps is blocked.
Check if the drainage pipe is bent or blocked.
Check the height of the drainage nozzle, make
sure it is 0.6-1 meter high from the bottom of the
washing machine.
Vibration of the washing machine
15
Level the washing machine.
Fasten the footing.
Check if all the delivery bolts have all been removed.
Possible Cause / Solution
Malfunction
Foam spills from the detergent
drawer
The machine stops when the procedure has not been finished
The drainage pump is noisy during
operation after the water has been
drained.
The machine stops for some time
during the wash procedure.
Check if the amount of detergent is excessive,
if it is the specialized detergent for the drum
washing machine.
Dip one scoop of the softener mixed with 1/2 liter
of water to the detergent box II.
Reduce the amount of detergent used next time.
Power failure or water cut.
The water inside the inner barrel has been drained
but there is still a small amount of water in the
drainage pump and pipe. The drainage pump
continuously work and takes in the air, then there
wil be noise which is normal situation.
The washing machine adds water automatically.
There is too much foam in the tube, the foam is
being drained.
Alarm codes
If the washing machine cannot work normally, a alarm code will appear on the display. Please carry
out the following checks.
Display
Reason
Inlet water
overtime
Overtime of
the drainage
The door has
not been closed
Others
Solutions
Open the water tap, to check if the inlet hose is squashed
or kinked, check if the filter in the inlet valve is blocked or
not; check if the water pressure is too low.
Check if the drain pump is blocked (see page 14).
Check if the door of the washing machine is closed.Check
if the clothes are trapped by the door seal.
Try again or contact your local service center if the
problem persists.
16
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase date
of your machine. The Service Centre will require this
information.
Technical data
(8k
g)
kg)
(7
8mm 6k g)
(
1 01
m
m
9 48
495
Rated Mains
Wash power
Spin power
Heat power
mm
855mm
595mm
Max. Power
Water pressure
Net weight
Drain method
Spin method
Volume
Spin Method
Drain Method
17
220-240 V/ 50Hz
200W
400W
2000W
2200W
0.02MPa~1MPa
77Kg
Upper drain
Centrifugal
58L
Centrifugal
Upper Drainage
Installation
Unpacking the washing machine
Unpack your washing machine and check if there is any damage during the transportation Also make
sure that all the items in the attached bag are received if there is any damage to the washing machine
during the transportation. Or any item is missing .Please contact the local dealer immediately.
Dispose the packing materials
The packing materials of this machine may be dangerous to kids.Please dispose them properly and avoid
easy touch by kids. Please dispose the related packing materials according to the relevant local
regulations.Please do not throw the packing materials according away together with the other daily living
rubbishes.
Remove transport bolts
Before using this washing machine,transport bolts must be
removed from the backside of this machine .Please take the
following steps to remove the bolts:
1.Loosen all bolts with spanner and then remove them
2.Stop the holes with transport hole plugs
3.Keep the transport bolts properly for future use
Positioning
Please install the washing mashing on solid and flat ground.
Please do not place the washing machine on the cardboard, wood or similar materials
Please do not install the washing machine outdoors to prevent the washing machine
from frozen to damages in machine parts.
Connect the inlet hose
Connect the inlet hose as indicated in the figure
Inlet Hose Installation
1
Take out the attached inlet hose.
2
Approach vertically one end of the inlet
hose to the spiral tap specially for the
washing machine.
18
3
4
Screw tight the tap in the
direction of screw thread
of the inlet hose.
Connect the hose to the water
inlet at the back of the washing
machine.
When connecting the water hose and the water tap, do not wear the screw.
When connecting the screw thread of the inlet hose and the inlet valve, prevent the
screw thread screwed incorrectly or it will wear or leak.
To avoid the damage caused by the overbending of the inlet hose .
Please check the inlet hose conditions regularly. Please replace it in time if damaged.
Water drainage
The end of the drain hose can be positioned in three
ways:
Hooked over the edge
of a sink using the
plastic hose guide
supplied with the
machine.
In this case, make sure
the end cannot come
unhooked when the
machine is emptying.
This could be done by
tying it to the tap with a piece of string or attaching it
to the wall.
In a sink drain pipe branch.
This branch must be above the trap so that the bend
is at least 60 cm above the ground.
Directly into a drain pipe at a height of not less than
60 cm and not more than 90 cm. The end of the drain
hose must always be ventilated , i.e. the inside
diameter of the drain pipe must be larger than the
outside diameter of the drain hose.
The drain hose must not be kinked.
19
Electrical connection
Information on the electrical connection is given on the rating plate on the inner edge of the appliance door.
Check that your domestic electrical installation can take the maximum load required, also taking into
account any other appliances in use.
Caution! Connect the machine to an earthed socket.
Caution! The manufacturer does not accept any responsibility for damage or injury through failure to
comply with the above safety precaution.
Caution! Should the appliance power supply cable need to be replaced, this MUST be carried out
by a Service Centre
The power supply cable must be easily accessible after
installing the machine
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product.
For more detailed information about recycling of this
product, please contact your local council, your
household waste disposal service or the shop where
you purchased the product.
Packaging materials
The materials marked with the symbol are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
>PAP<=paper
Repair and After-sales Service
Repair Guarantee:
1.This product implements the national guarantees. The customer can enjoy the service promised under the
normal usage and maintenance.
2.The company will repair free during the guarantee term if there is any fault or abnormal operation caused by
manufacture quality problems.
3.The user can contact the local service centre if there is any fault or part issueafter the guarantee term. The
local service centre will provide service for you continuously.
4.If the total machine is abnormal,please do not dismantle the parts privately.
20
Download PDF