BLF/BLFR - Data Sheet

BLF/BLFR - Data Sheet
Data sheet
BLF/BLFR
Sheet No.: BLF/BLFR1.01 RevA
Date: October 2010
BLF/BLFR Hydraulic linear single-acting
spring-closing actuator
Description:
The BLF/BLFR is designed as hydraulic fail close actuators. When the actuator is operated
by hydraulic pressure, the output spindle is lifted (and the valve is thus opened) and the
spring package is compressed. When the pressure is released, the spring package will
press down the spindle and close the valve. The BLF/BLFR is designed with built-in
crossover valve and is equipped with a direct visual position indicator. The BLF/BLFR
can be operated in any kind of environment and is easily adapted to all well-known globe
valves, and all models are prepared for direct built-in modular control functions. The BLF/
BLFR is also equipped with a unique emergency system; when the hydraulic pressure is
not available, the valve can be opened and closed by means of a built-in manual hand
pump (Model BLFR). When the pressure is reestablished, the manual hand pump function
is automatically disengaged at the first hydraulic opening of the actuator.
Manufacture:
The BLF/BLFR actuators are manufactured in accordance with the guidelines for quality
system stated in the American standard ANSI/ASQC Z-1.15. After assembly, each actuator
is flushed to NAS 1638/10 standard and plugged. Flushing to NAS 1648/7 standard can be
performed on request.
Classification:
Meets the requirements from the major
classification and approval authorities
like:
Det Norske Veritas
Lloyd’s Register of Shipping
American Bureau of Shipping
Rina
Russian Register of Shipping
Bureau of Veritas
Germanischer Lloyd
U.S. Coast Guard
Main data:
www.Bettis.com
Temperature range:
-20˚C to +80˚C (-5˚F to +180˚F)
Housing:
GGG40
(Ductile Iron)
Piston:
GGG40
(Ductile Iron)
Output spindle:
Brass, other material on request
Indicator housing:
Brass MS 58
Intermediate flange:
St 52-3,
Coating:
Primer: Min 40 micron, type Hempel EE 13140
Top coat: Min 25 micron alkyd, orange RAL
2002
(Carbon Steel)
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
BLF/BLFR
Sheet No.: BLF/BLFR1.02 RevA
Date: October 2010
Main dimensions:
Technical data:
Working pressure:
BLFR
Test pressure:
1.5 x working pressure
Burst test:
min. 675 bar
End closing thrust (spring):
1500-16500 N (1100 lbf - 12,000 lbf)
Viscosity of hydraulic oil:
15 to 200 cSt
BLF
Dimensions:
Thrust
lbf
Weight
lb
Displacement cu.in.
Dimensions
inches
135 bar (2000 psi)
N
Kg
litres
mm
End ClosingDimensions Bottom View
Dimensions Front View
Thrust
Stroke
Weight
Displace
Model
ment
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
BLF 65
337
1
13
1.28
2
0
1500
BLF 125
1079
4800
BLF 250
3709
16500
3.15
1.87
-
-
1.36 1.42 2.99
16.25
6
0.021
62
1
24
5.00
3
9
80
47.5
-
-
34.5
0
3.07
31.25
11
0.082
75
9
78
2
112
26.12
5
1
2.76
62.5
51
0.428
118
14
70
36
76
1.97 2.05 2.83 1.67 1.65 3.54
50
52
72
42.5
42
90
3.31 3.07 2.83 2.91 2.83 5.51
84
78
72
74
72
140
0.67 0.59
17
15
0.75 0.79
19
20
0.91 1.38
23
35
6.30
8.86
2.52
3.15
160
225
64
80
8.23
13.58
3.15
3.84
209
345
12.95 23.70
329
80
97.5
5.91
6.10
150
155
602
0.79
-
0.36
20
-
9
0.98 3.50 0.36
25
89
9
1.97 6.10 0.36
50
155
9
S
T
U
1.32 0.87 2.48
33.5
22
63
1.32 0.87 2.48
33.5
22
63
1.32 0.87 2.48
33.5
22
63
*Higher torques on request - For lower pressure supply consult factory.
Standard features:
The BLF/BLFR actuator for fail safe close operation of globe valves:
- Unique and simple design with built-in
- Built-in hydraulic emergency operation for
crossover valve
BLFR
- Easy installation on intermediate flange at - Direct visual position indication
globe valve
- Electrical on/off or continuous position
- Same unit for several valve sizes
indication IP 68
- Will operate in sea air as well as sea water
- Connection block with filter
- No external moving parts during operation
- Throttle valve
- Prepared for direct built-on modular control - Quick connection for emergency operation functions or LPU
with portable hand pump (BLFR)
- LPU mounting
- Epoxy coating
- On request special features as:
°Flushing valve built into the connection block
making it possible to flush the system without disconnection of pipes
°Fail open actuator (BLF only)
Note: Not Certified dimensional drawings. Such drawings are available on request. Contact factory with correct model designation and serial number.
Important: Due to Emerson’s continuing commitment to engineered product advancement, data presented herin is subject to change.
The contents of the publication are presented for information purposes only, and while effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, expresses or implied, regarding the products or services described herein or their use or applicability.
All sales are governed by our terms and conditions, which are available on request.
We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement