Weslo WETL34709.0 User`s manual

Weslo WETL34709.0 User`s manual
Model No. WETL34709.0
Serial No.
Write the serial number in the space
above for reference.
USER'S MANUAL
Serial Number
Decal
QUESTIONS?
If you have questions, or if there are
missing parts, please contact us:
Call: 08457 089 009
From Ireland: 053 92 36102
E-mail: www.iconsupport.eu
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC, Express Way
Whitwood, West Yorkshire
WF10 5QJ
UK
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
www.iconeurope.com
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
RECYCLING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning
decal(s). If a decal is missing or illegible, call the
telephone number on the front cover of this
manual and request a free replacement decal.
Apply the decal in the location shown. Note: The
decal(s) may not be shown at actual size.
WESLO is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
1. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with
pre-existing health problems.
cuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used. Do not use an extension cord.
2. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
11. Keep the power cord away from heated surfaces.
3. Use the treadmill only as described.
12. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROUBLESHOOTING on page 14 if the treadmill is
not working properly.)
4. Place the treadmill on a level surface, with at
least 8 ft. (2.4 m) of clearance behind it and 2
ft. (0.6 m) on each side. Do not place the
treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
13. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 10).
5. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
14. Never start the treadmill while you are standing on the walking belt. Always hold the uprights while using the treadmill.
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
7. The treadmill should be used only by persons
weighing 220 lbs. (100 kg) or less.
16. The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
8. Never allow more than one person on the
treadmill at a time.
9. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended
for both men and women. Always wear athletic shoes. Never use the treadmill with bare
feet, wearing only stockings, or in sandals.
17. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and switch the on/off switch
to the off position when the treadmill is not in
use. (See the drawing on page 5 for the location of the switch.)
10. When connecting the power cord (see page
8), plug the power cord into an earthed cir-
3
18. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 13.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
23. This treadmill is intended for in-home use
only. Do not use this treadmill in a commercial, rental, or institutional setting.
24. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
19. When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
25. This treadmill is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning the use of
the treadmill by a person responsible for their
safety. Keep children under age 12 and pets
away from the treadmill at all times.
20. Never insert any object into any opening on
the treadmill.
21. Inspect and properly tighten all parts of the
treadmill regularly.
22.
DANGER: Always unplug the power
26. If the power cord is damaged, it must be replaced by the manufacturer, its service agent,
or similar persons in order to avoid injury or
damage to the treadmill.
cord immediately after use, before cleaning the
treadmill, and before performing the maintenance and adjustment procedures described in
this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the
procedures in this manual should be performed
by an authorized service representative only.
SAVE THESE INSTRUCTIONS
4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary WESLO®
COMPACT ELITE treadmill. The COMPACT ELITE
treadmill offers an impressive selection of features designed to make your workouts at home more enjoyable
and effective. And when youʼre not exercising, the
unique treadmill can be folded up, requiring less than
half the floor space of other treadmills.
ing this manual, please see the front cover of this manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
Console
Pulse Sensor
Key/Clip
Upright
On/Off Switch
Walking Belt
Foot Rail
Cushioned Platform
Idler Roller
Adjustment Bolts
5
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
1. Make sure that the power cord is unplugged.
1
Turn the Upright Knobs (11) counterclockwise
(only one is shown).
See the lower drawing. Pull the Latch Knob
(10), partially raise the Uprights (3, 4) and then
release the Latch Knob. With the help of a second person, raise the Uprights.
3, 4
11
Turn the Upright Knobs (11) clockwise to lock
the Uprights (3, 4) in the vertical position.
4
3
10
6
2. Pivot the console assembly to the desired position and tighten the Console Knobs (37).
2
Always make sure that the Console Knobs
(37) are fully tightened before you use the
treadmill.
Console
Assembly
37
3. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear
plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages
14 and 15).
7
OPERATION AND ADJUSTMENT
THE PRE-LUBRICATED WALKING BELT
Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or similar substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product is for use on a dedicated, 20-amp, 220–240 volt circuit. This product must be earthed. If it
should malfunction or break down, earthing provides a path of least resistance for electric current to reduce the
risk of electric shock. This product is equipped with a power cord having an equipment-earthing conductor and an
earthing plug. IMPORTANT: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord.
See drawing 1. Press the pins on the power cord into the metal clips
in the adapter as shown. Close the adapter cover over the end of the
power cord and tighten the screw in the adapter. IMPORTANT:
Make sure that the adapter cover is secure and the screw has
been tightened before using the power cord.
1
Adapter
See drawing 2. Plug the power cord into an appropriate outlet that is
properly installed and earthed in accordance with all local codes and
ordinances.
DANGER:
Adapter
Cover
Screw
2
Pins
Metal
Clips
Outlet
Improper connection of the equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether the product is properly earthed. Do not modify the plug provided with the product—if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.
8
CONSOLE DIAGRAM
Km/H
QUICK SPEED
Key
Clip
FEATURES OF THE CONSOLE
To turn on the power, see page 10. To use the manual mode, see page 10. To use a preset workout,
see page 12.
The treadmill console offers an impressive array of
features designed to make your workouts more effective and enjoyable.
IMPORTANT: If there are sheets of clear plastic on
the console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use the
treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 15).
When you use the manual mode, you can change the
speed of the treadmill with the touch of a button. As
you exercise, the console will display instant exercise
feedback. You can even measure your heart rate using
the handgrip pulse sensor.
In addition, the console features four preset workouts.
Each workout automatically controls the speed of the
treadmill as it guides you through an effective exercise
session.
9
HOW TO TURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room temperature before turning on the power. If you do not
do this, you may damage the console displays or
other electrical components.
Plug in the power cord (see
page 8). Next, locate the
on/off switch on the treadmill
frame near the power cord.
Push the switch to the on
position.
On
HOW TO USE THE MANUAL MODE
1. Insert the key into the console.
See HOW TO TURN ON THE POWER at the left.
2. Select the manual mode.
When the key is inserted, the manual mode will be
selected. If a workout has been selected, remove
the key and then reinsert it.
3. Start the walking belt.
To start the walking belt, press the Start button.
The walking belt will begin to move. As you exercise, change the speed of the walking belt as desired by pressing the Fast and Slow buttons. Note:
After you press a button, it may take a moment for
the walking belt to reach the selected speed setting.
Next, stand on the foot rails of the treadmill. Find the
clip attached to the key (see the drawing on page 9)
and slide the clip onto the waistband of your clothes.
Then, insert the key into the console. IMPORTANT: In
an emergency situation, the key can be pulled from
the console, causing the walking belt to slow to a
stop. Test the clip by carefully taking a few steps
backward; if the key is not pulled from the console,
adjust the position of the clip.
If you press one of the speed buttons numbered 1
to 12, the walking belt will gradually change speed
until it reaches the selected speed setting.
Before you use the treadmill for the first time, allow the
treadmill to run for at least ten minutes without anyone
on the treadmill.
To stop the walking belt, press the Stop button. To
restart the walking belt, press the Start button or
the Fast button.
10
4. Follow your progress with the display.
To measure your
heart rate, stand
on the foot rails
and hold the metal
contacts. Avoid
moving your
hands. When
your pulse is deContacts
tected, your heart
beats and then
your heart rate will be shown. For the most accurate heart rate reading, continue to hold the
contacts for about 15 seconds.
The speed display shows the speed of the walking belt.
The time display shows the elapsed time. Note:
When a workout is selected, the display will show
the time remaining in the workout instead of the
elapsed time.
The calories display shows the approximate number of calories you have burned.
The program/distance display shows the distance you have walked or run. This display will also
show the distance you still have to run and the
workout number when you use a preset workout.
6. When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, remove the key from the console, and put it in a secure place.
The pulse/levels display will show your heart rate
when you use the handgrip pulse sensor (see step
5). This display will also show the workout level
when you use a preset workout.
When you are finished using the treadmill, switch
the on/off switch to the off position and unplug the
power cord. IMPORTANT: If you do not do this,
the treadmillʼs electrical components may wear
prematurely.
To reset the display, press the Stop button, remove
the key, and then reinsert the key.
5. Measure your heart rate if desired.
Before using the handgrip pulse sensor, remove
the sheets of clear plastic from the metal contacts
on the pulse bar. In addition, make sure that your
hands are clean.
11
HOW TO USE A PRESET WORKOUT
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start button. The walking belt will begin to move. When the
next segment of the workout begins, the treadmill
will automatically adjust to the speed setting for the
next segment.
1. Insert the key into the console.
See step 1 on page 10.
2. Select a preset workout.
To select a preset workout, press the Select button.
Press the Fast button or the Slow button to select
the desired workout and then press the Select button. Next, press the Fast button or the Slow button
to select the desired workout level and press the
Select button. Then, press the Fast button or the
Slow button to select the workout duration.
3. Start the walking belt.
Press the Start button to start the workout. A moment after you press the button, the treadmill will
automatically adjust to the first speed setting of the
workout. Hold the handrails and begin walking.
Each workout is divided into segments. One speed
setting is programmed for each segment. Note:
The same speed setting may be programmed for
consecutive segments.
Several seconds before the speed of the treadmill
is about to change, a series of tones will sound to
alert you. The treadmill will then automatically adjust to the speed setting for the next segment.
The workout will continue in this way until the last
segment ends. The walking belt will then slow to a
stop.
4. Follow your progress with the display.
See step 4 on page 11.
5. Measure your heart rate if desired.
See step 5 on page 11.
6. When you are finished exercising, remove the
key from the console.
See step 6 on page 11.
HOW TO CHANGE THE INCLINE OF THE TREADMILL
To vary the intensity of your exercise, you can change
the incline of the treadmill. There are two incline levels.
Before changing the incline, remove the key and
unplug the power cord.
To change the incline, raise the frame slightly. Bend
your legs and keep your back straight as you raise
the frame. Pivot the incline arm to the desired position.
Lower the frame. CAUTION: Before using the treadmill, make sure that the incline arm is held securely
in one of the incline positions.
If the speed setting is too high or too low at any
time during the workout, you can manually override
the setting by pressing the speed buttons; however, when the next segment of the workout begins, the treadmill will automatically adjust to
the speed setting for the next segment.
Frame
12
Incline
Arm
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, remove the key and unplug the
power cord. CAUTION: You must be able to safely lift 45 lbs.
(20 kg) to raise, lower, or move the treadmill.
1
1. Hold the metal frame firmly in the location shown by the
arrow at the right. CAUTION: To decrease the possibility of
injury, do not lift the frame by the plastic foot rails. Bend
your legs and keep your back straight as you raise the
frame. Raise the frame about halfway to the vertical position.
2. Raise the frame until the latch knob locks into the storage position. Make sure that the latch knob is locked in the storage
position.
To protect the floor or carpet from damage, place a mat
under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in
temperatures above 85° F (30° C).
Frame
2
Frame
Latch Knob
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the storage
position as described above. Make sure that the latch knob is
locked in the storage position.
1. Hold an upright and place a foot against one of the wheels.
2. Tip the treadmill back until it rolls freely on the wheels. Carefully
move the treadmill to the desired location. Never move the
treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do
not attempt to move the treadmill over an uneven surface.
3. Place one foot against a wheel, and carefully lower the treadmill until it is resting in the storage position.
Upright
Wheel
HOW TO LOWER THE TREADMILL FOR USE
1. See drawing 2. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold
it. It may be necessary to push the frame forward as you pull the knob to the left. Pivot the frame downward
and release the latch knob.
2. See drawing 1. Hold the metal frame firmly with both hands and lower it to the floor. CAUTION: Do not
grip only the plastic foot rails or drop the frame to the floor. Bend your legs and keep your back
straight.
13
TROUBLESHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please see the front cover of this manual.
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet (see page 8). Do not use
an extension cord.
b. After the power cord has been plugged in, make sure that the key is inserted into the console.
c. Check the on/off switch located on the treadmill
frame near the power cord. If the switch protrudes
as shown, the switch has tripped. To reset the
switch, wait for five minutes and then press the
switch back in.
c
Tripped
On
PROBLEM: The power turns off during use
SOLUTION: a. Check the on/off switch (see the drawing above). If the switch has tripped, wait for five minutes
and then press the switch back in.
b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for
five minutes, and then plug it back in.
c. Remove the key from the console. Reinsert the key into the console.
d. If the treadmill still will not run, please see the front cover of this manual.
PROBLEM: The walking belt slows when walked on
SOLUTION: a. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG
THE POWER CORD. Using the hex key, turn both
idler roller bolts counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt
2 to 3 in. (5 to 7 cm) off the walking platform. Be
careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
a
2–3 in.
Idler Roller Bolts
b. If the walking belt still slows when walked on, see the front cover of this manual.
14
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt is off-center, first remove the
key and UNPLUG THE POWER CORD. If the
walking belt has shifted to the left, use the hex
key to turn the left idler roller bolt clockwise 1/2 of a
turn; if the walking belt has shifted to the right,
turn the left idler roller bolt counterclockwise 1/2 of
a turn. Be careful not to overtighten the walking
belt. Then, plug in the power cord, insert the key,
and run the treadmill for a few minutes. Repeat
until the walking belt is centered.
b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD.
Using the hex key, turn both idler roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each
edge of the walking belt 2 to 3 in. (5 to 7 cm) off
the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for
a few minutes. Repeat until the walking belt is
properly tightened.
a
b
LUBRICATING THE WALKING BELT
When the treadmill is used regularly, lubricate the walking belt every two to six months. If the underside of the
walking belt does not feel slick to the touch, lubricate the walking belt. If additional lubricant is needed, see the
front cover of this manual.
To lubricate the walking belt, remove the key from the console
and unplug the power cord. Pull the left and right edges of the
walking belt toward the idler roller, until the seam of the walking
belt is above the middle of the walking platform. Avoid pinching
your fingers.
Insert the spray valve into the lubricant bottle. Lift the right edge
of the walking belt and spray lubricant underneath the walking
belt for approximately four seconds. Make sure to spray lubricant
near the center of the walking belt and near the front and back of
the treadmill. Repeat this step on the left side of the treadmill. Wait one minute before starting the treadmill.
15
Seam
EXERCISE GUIDELINES
WARNING: Before beginning this
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
or any exercise program, consult your physician. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is intended only as an exercise aid in determining
heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic exercise, which is activity that requires large amounts of
oxygen for prolonged periods of time. For aerobic exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming Up—Start with 5 to 10 minutes of stretching
and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise–never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
16
PART LIST—Model No. WETL34709.0
To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual.
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
1
1
1
1
1
1
1
1
1
1
2
1
4
1
1
1
1
1
1
2
1
1
4
2
4
1
1
1
1
2
2
1
1
1
1
2
2
Description
Key No. Qty.
Base
Frame
Left Upright
Right Upright
Console Bracket
Incline Arm
Lower Support Tube
Upper Support Tube
Motor Bracket
Latch Knob
Upright Knob
Gas Spring
Leveling Foot
Drive Roller
Idler Roller
Console
Console Back
Motor Hood
Belly Pan
Foot Rail
Left Rear Cap
Right Rear Cap
Wheel
Handgrip
Isolators
Left Outer Base Cover
Right Inner Base Cover
Left Inner Base Cover
Right Outer Base Cover
Inner Knob Cover
Outer Knob Cover
Left Outer Upright Cover
Left Inner Upright Cover
Right Inner Upright Cover
Right Outer Upright Cover
Pulse Plate
Console Knob
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
*
*
1
2
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
2
1
2
1
2
2
1
35
4
3
2
2
1
1
–
–
R1209B
Description
Key/Clip
Incline Arm Washer
Lower Support Tube Cap
Upper Support Tube Cap
Walking Belt
Walking Platform
Drive Belt
Display
Button Sensor
Pulse Sensor
Motor Sensor Wire
Controller
On/Off Switch
Power Cord Receptacle
Transformer
Filter
Drive Motor
Upright Wire
Console Wire Harness
Ground Wire
Red Plug Wire
Green Plug Wire
Power Cord
M10 x 55mm Bolt
M10 x 90mm Bolt
M8 X 60mm Bolt
M8 x 40mm Bolt
M8 x 70mm Bolt
M4 x 15mm Bolt
Console Bracket Screw
Knob Cover Screw
Pulse Plate Screw
Idler Roller Washer
Drive Roller Washer
Latch Warning Decal
Hex Key
Grease
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
17
EXPLODED DRAWING A—Model No. WETL34709.0
57
58
60
59
14
72
20
44
54
65
62
9
71
42
63
70
15
63
39
70
18
52
53
20
43
21
49
61
64
25
25
50
48
25
25
23
18
6
39
51
61
2
19
22
23
R1209B
EXPLODED DRAWING B—Model No. WETL34709.0
24
16
36
47
69
67
5
3
32
7
10
8
40
67
37
30
11
41
38
33
31
68
45
13
26
12
13
23
66
17
66
13
19
27
1
24
56
66
28
23
66
46
13
R1209B
36
69
66
34
68
29
4
35
30
31
55
11
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
RECYCLING INFORMATION
This electronic product must not be disposed of in municipal waste. To
preserve the environment, this product must be recycled after its useful
life as required by law.
Please use recycling facilities that are authorized to collect this type of waste in
your area. In doing so, you will help to conserve natural resources and improve
European standards of environmental protection. If you require more information
about safe and correct disposal methods, please contact your local city office or
the establishment where you purchased this product.
Part No. 292954 R1209B
Printed in China © 2009 ICON IP, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement