SECO-LARM SD-C141S Specification

SECO-LARM SD-C141S Specification
ENFORCER ®
2009 Condensed Mini Catalog
2-Channel Receivers
1-Channel Receivers
SK-910R
SK-910RA, SK-910RAV
SK-910R
11 to 24 VAC/VDC operation,
10A @ 24VDC relay output.
SK-910RA
Mini size, 11 to 24 VAC/VDC, 3A relay output.
SK-910RAV
Mini size, 3 to 13.8 VDC,
5A transistor ground output.
Control garage doors, house lights, alarm panels,
or other devices via remote.
Compatible with all SECO-LARM transmitters.
Output is programmable for 4-sec. momentary (default), 1-sec. momentary, toggle, or validity.
LED indicates RF reception, learn mode entered, transmitter learned, memory cleared.
315MHz. 433MHz version also available.
1-Button Transmitters
SK-919TD1S-UP
Factory pre-coded.
SK-919TT1S-BU
SK-910R2
SK-910RAV2
SK-910R2
11 to 24 VAC/VDC operation,
2 x 10A @ 24VDC relay outputs.
SK-910RAV2
Mini size, 3 to 13.8 VDC,
2 x 3A transistor ground outputs.
Control garage doors, house lights, alarm panels, or other devices via remote.
Compatible with all SECO-LARM transmitters.
Outputs are programmable for 4-sec. momentary (default), 1-sec. momentary, toggle, or validity.
Two LEDs indicate RF reception, learn mode entered, transmitter learned, memory cleared.
315MHz. 433MHz version also available.
2-Button Transmitters
SK-919TD2A-UP
SK-919TD2A-U
CODEBUMP™ codehopping
technology, 18 quintillion codes.
For all SECO-LARM 315MHz receivers.
Up to 500-ft. range.
LED transmission indicator.
Includes 12VDC alkaline battery.
315MHz. 433MHz version also available.
Sample Application:
~
~~~
~~
~
Make push-to-exit plate
or keypad wireless.
4-Button Transmitters
SK-919TP4J-NU
Factory pre-coded.
Over 68 billion (6.8 x 1010)
possible codes.
SK-917T2A-U
For all SECO-LARM 315MHz receivers.
Up to 500 ft. range.
LED transmission indicator.
Includes 12VDC alkaline battery.
315MHz. 433MHz version also available.
Extended Range Antenna
SK-91ERSD
SK-915BA
12VDC Battery for all
transmitters except handheld.
Wired 1-Button Transmitter
Control garage doors, house lights, alarm panels, or other devices via remote.
Compatible with all SECO-LARM transmitters.
Outputs are programmable for timed (1,2,3,4,5,10, 30,and 60 seconds), toggle, latching, or validity modes.
Four LEDs indicate RF reception, learn mode entered, transmitter learned, memory cleared.
315MHz. 433MHz version also available.
For all SECO-LARM
315MHz receivers.
Up to 500-ft. range.
10
Over 68 billion (6.8 x 10 )
possible codes.
LED transmission indicator.
Includes 12VDC alkaline battery.
315MHz. 433MHz version
also available.
Leather Pouch for
SK-919TD1S-UP & SK-919TT1S-BU.
11 to 24 VAC/VDC operation,
4 x 10A @ 24VDC relay outputs.
CODEBUMP™ codehopping
technology, 18 quintillion codes.
Uncoded. Over 68 billion
(6.8 x 1010) possible codes.
SK-915LP
SK-910R4
SK-917TP4J-NU
Factory pre-coded. Over
68 billion (6.8 x 1010)
possible codes.
DIP switch coding.
4-Channel Receiver
(1,000-ft. range max.)
Extend range for SECO-LARM RF receivers.
Plugs into receiver.
Slimline Handheld Transmitters
SK-919TP1H-BU - 1 Button, 1 Channel
SK-919TP2H-NU - 2 Buttons, 3 Channels
SK-919TP4H-NU - 4 Buttons, 15 Channels
Extreme Durability ¯ Rubber buttons eliminate damage caused by electrostatic discharge. Gold-plated battery clips and contact points extend the life of the transmitter.
Operates up to 500 ft. (150m).
Includes two 3VDC lithium batteries and visor clip.
Compatible with all SECO-LARM receivers.
1
3
1
Slimline design: 3 /2” x 2 /16” x /2” (89 x 56 x 12 mm).
SK-919TDWS-BU
External or internal battery power.
External or internal triggering.
Use to make almost any security output wireless.
Other features and specifications similar to
SK-919TD1S-UP.
2
SK-9HBC
Belt-clip holster for slimline handheld transmitters.
X-930-089
3-Volt Lithium Battery for handheld transmitters.
Battery
Belt-Clip Holster
www.seco-larm.com
RF Wireless Controls
SK-919TP2D-P
2-Button Desktop
Transmitter
Alarm Pager
SECOPAGE 35EV
EVP-1SD2P4UL
SECOPAGE 35EV features:
Monitors up to 2 zones per premise or vehicle, plus manual paging.
Connect to burglar or communications panels.
Range up to 1 mile.
Includes belt-clip vibrating receiver (E-35RV).
EVP-1SD4P9UL
E-35RV
4 Outputs, 2.5A Continuous
9 Outputs, 4A Continuous
EVP-1SD6P16UL
16 Outputs, 6A Continuous
Individual status LED indicators.
Individually protected
PTC-type fused outputs.
Includes enclosure, power
charger, and transformer.
Spare receiver.
Built-in audible & vibrating function for silent paging.
SK-919TP2D-F
2-Button Footswitch
Transmitter
E-35RD
For remote activation of locks, cameras, etc. from a desk or other location.
Use in offices, factories, etc.
Portable.
Attractive heavy-duty aluminum case.
Up to 500 ft. range.
Includes rechargeable battery and power adapter.
Compatible with all SECO-LARM 315MHz receivers.
RF Wireless R-T-E Plates
SD-8201GTPE1Q
Spare receiver.
Audible function.
E-35ANT
Use as alternative
to AM or CB antenna.
Power Supplies
SD-8103GT-PEQ
Rack-Mount CCTV Power Supplies
Green, 2" square illuminated pushbutton
Ideal for hard to wire installations such as cement wall or brick buildings.
"EXIT" and "SALIDA" silk-screened on plate.
Built-in RF transmitter:
-- Powered by 9VDC (Battery included).
-- Over 68 billion (6.8 x 1010) possible codes.
-- Compatible with all SECO-LARM 315MHz receivers.
-- LED to indicate RF transmission and low battery.
Battery life: Up to 4 years (60 uses per day).
SD-8201GTPE1Q
SD-8103GT-PEQ
*Please turn to page 12 for more RTE plates.
EVP-1SA4P4UL
4 Outputs, 4A Continuous
EVP-1SA4P9UL
EVP-1SA8P16UL
SD-8202GT-PEQ
Green, small, square illuminated pushbutton
24VAC CCTV Power Supplies
9 Outputs, 4A Continuous
See Page 8 and Page 14
for more power supplies.
Green, 1½" diameter, mushroom-cap pushbutton
SD-8202GT-PEQ
12VDC CCTV Power Supplies
16 Outputs, 8A Continuous
Individual status LEDs.
Individually protected
PTC-type fused outputs.
Main power switch
with surge protection.
Includes enclosure
and transformer.
PH-A1612-GUQ - Glass fuse
PH-A1612-PUQ - PTC fuse
12VDC/24VAC CCTV Power Supply
16-port, selectable 24/28VAC, 12A
1U Rack Mount CCTV Power Supply
EVP-124M6P16Q
Field selectable 24 or 28 VAC outputs, or OFF via slide switch.
Selectable 110 or 240VAC input.
Total Supply Current 12A @24VAC.
Output fuses rated at 2A per channel.
Glass fuses conveniently accessible from the front panel (PH-A1612-GUQ model).
Dual color LED status indicator for each output
(Blue-normal, Red-fault, OFF-not in use)
Equipped with a cable management bracket for a neat and professional wiring installation.
Removable terminal blocks for easy wiring.
Rack, wall or desk (stackable) mountable.
Built-in surge protection.
UL-approved overheat protected power transformer.
Ventilation holes to prevent heat build-up.
Dimensions (excluding bracket):
(HxWxD) 1.75” x 17.5” x 11.4”
16-Output CCTV Power Supply, 6A Continuous
Individual status LEDs.
Individually protected PTC-type fused outputs.
16-output CCTV power supply.
(8 are 12VDC, 8 are 24VAC)
6 Amps.
Extra-large enclosure.
CCTV Power Distribution Boards
PDM-4G5-P1.1Q
4 Outputs with LEDs.
9 Outputs with LEDs.
PDM-9G5-P1.1Q
Note: Products with a model number that ends with “Q” or has a green “Q” sticker indicates RoHS compliance.
5A, 250VAC main fuse.
3
ENFORCER ®
Vandal Varifocal Domes
The below cameras incorporate the
following outstanding features:
360° 3-axis rotation.
Surface or flush mountable.
Vandal-resistant and weatherproof (IP67).
Service monitor port.
Dual Voltage: 12VDC or 24VAC.
Iris control adjustment built-in.
Easy adjustment of zoom and focus.
Series
EV-2606-NJEQ
True Day/Night Operation.
1/3” Sony Super HAD.
550 TV Lines.
Mechanical IR cut filters.
3.8~9.5mm varifocal lens.
True Day/Night Operation.
1/3” Sony Super HAD.
550 TV Lines.
Mechanical IR cut filters.
2.8~11mm varifocal lens.
EV-2615-NKEQ
DNR Cameras are the ideal
solution to protect areas in poor
lighting conditions. An ultra-low lux
rating of 0.002 allows the camera
to see in almost total darkness.
Digital Noise Reduction.
1/3” Sony Super HAD.
520 TV Lines.
On-screen display.
2.8~11mm varifocal lens.
0.002 lux
For wall or ceiling mount.
24 LEDs, 50' range.
1/3" Sony CCD, 3.6mm lens.
420 TV lines.
Split glass design to eliminate IR reflection.
Flush-Mount Ball Color Camera
EV-122C-FVB3Q (White Case)
3.7mm pinhole lens
Low profile design, extends
outward only one inch.
True Day/Night design,
minimum 0.05 lux.
1/3” Sony Super HAD CCD.
420 TV Lines.
Day/
Lens rotates for ceiling or wall mount.
Night
No
exposed
screws,
tamper
resistant.
15
Small size: 3” x 1 /16” (77 x 49 mm)
Also available EV-122C-FVA3Q (Silver case).
For wall or ceiling mount.
3.6mm fixed lens.
24 IR LEDs.
Up to 50-ft. range.
Sony 1/3" CCD.
Weatherproof IP 66.
Split glass design to
stop IR reflection.
11
1
Small size: 3 /16” x 3 /8.”
Vandal-resistant construction.
50' range
Voltage Booster
ST-HB105-TTQ
Compensates for DC voltage
drops over long cable run.
Input voltage: 7-24 VDC
Output voltage:
12 or 24 VDC (adjustable).
See page 14 for more detail.
Vandal resistant case.
Wall or ceiling mount.
1/3” Sony CCD.
420 TV Lines, 3.6mm lens.
21 IR LEDs. 50' range.
Weatherproof
for outdoor use.
1
Mini size: 3” x 4 /4”
50' range
Ceiling and wall brackets for the
EV-26 Series cameras
EV-260WM
EV-1223C12 (Color)
Color 1/3” Sony CCD.
O
4.3mm lens, 78
viewing angle.
420 TV Lines, 0.1 lux.
Multi-axis gimbal for
ceiling or wall mounting.
EV-122C-2 (Color) Same as EV-1223C12, but with
2.9mm Lens, 120O viewing angle.
EV-122B-4 (B/W) EV-122C-VWA3
Vandal resistant case.
Wall or ceiling mount.
1/3” Sony CCD.
420 TV Lines, 3.6mm lens.
Weatherproof
for outdoor use.
1
Mini size: 3” x 4 /4”.
B/W 1/3” CCD.
4.3mm lens, 78O viewing angle.
420 TV Lines, 0.1 lux.
Multi-axis gimbal for ceiling or wall mounting.
VB-CN1Q
Corner mounting bracket for
use with EV-1223C12,
EV-122C-2, EV-122B-4.
Mini Vandal Color Dome
Wall Mount Bracket
Dome Cameras
EV-260CM
4
EV-122C-DVC3
Wide Dynamic Range.
1/3” Pixim DPS Image Sensor.
540 TV Lines.
On-screen display.
2.8~11mm varifocal lens.
Ceiling Mount
Bracket
For wall or ceiling mount.
4-9mm varifocal lens.
36 IR LEDs.
Up to 100-ft. range.
Sony 1/3" CCD.
100' range
Weatherproof IP 66.
External adjustments for
zoom and focus.
Split glass design to stop IR reflection.
5
15
Small size: 4 /8” x 3 /16.”
Vandal-resistant
construction.
21-LED IR Mini Vandal Color Dome
WDR Cameras are good in
locations with lighting difficulties
such as extreme overexposure
or underexposure.
50' range
(Surface Mount shown)
EV-2625-NKEQ
EV-122C-DXA3
EV-122C-DVAVQ
EV-2605-NKEQ
Interior Ball-Mount Camera
Vandal Ball-Mount Dome Cameras
EV-122C-DVB3Q
(Flush Mount shown)
2009 Condensed Mini Catalog
Mini Dome Cameras
EV-1223C12M
Color 1/3” Sharp CCD.
3.6mm lens, 96O viewing angle.
420 TV Lines, 0.1 lux.
15
3
Minature sixe: 2 /16” x 2 /32”.
Multi-axis gimbal for ceiling
or wall mounting.
www.seco-larm.com
EV-1323C12DWQ
Series
(Color)
EV-133C-DWBWQ
1/3" Sony Super HAD.
550 TV lines.
5~50mm varifocal lens.
15 giant IR LEDs.
Concealed cable.
Weatherproof IP67.
IR range 200 feet (75m).
Split glass design to eliminate IR reflection.
DC auto iris.
Dual voltage: 12VDC or 24VAC.
BNC to VGA Converter
IR Day/Night CCTV
Long-Range Varifocal
IP68
40' range
200' range
EV-133C-DWAVQ
1/3" Sony Super HAD.
550 TV lines.
4~9mm varifocal lens.
56 IR LEDs.
Concealed cable.
Weatherproof IP67.
IR range 100 feet (30m).
Split glass design to eliminate IR reflection.
DC auto iris.
Dual voltage: 12VDC or 24VAC.
EV-132C-DW2Q (Color)
100' range
12 LEDs, 40' range.
1/3" CCD. 4.3mm lens.
420 TV lines.
12 VDC.
210mA (LEDs on), 110mA (LEDs off).
0.1 Lux. (LEDs off), 0.0 Lux (LEDs on).
IP68
60' range
EV-1123B24 (B/W, Standard)
400 TV lines / 0.1 lux. / 3.5W.
EV-1133C24 (Color, High-res)
460 TV lines / 0.4 lux. / 5W.
1/3" CCD.
Sony chip
and sensor.
24VAC.
24 LEDs, 80' range.
1/3" Sony CCD.
24 IR LEDs
420 TV lines.
12 VDC.
290mA (LEDs on), 90mA (LEDs off).
0.1 Lux. (LEDs off), 0.0 Lux (LEDs on.
6.0mm lens, 53° viewing angle.
EV-132C-DWL8Q Same as EV-132C-DWL6Q, but with an 8mm lens, 39O viewing angle.
EV-132C-DWLDQ Same as EV-132C-DWL6Q, but with
a 12mm lens, 26O viewing angle.
EV-132C-DWLH
Same as EV-132C-DWL6Q, but with
a 16mm lens, 19O viewing angle.
IR Illuminator
VI-B1003-SBQ
24-LED IR illuminator,
projects to 80 ft.
Works with most IR
CCTV cameras.
IP68.
80' range
Bullet Cameras
Sony chip, 1/3” CCD.
420 TV lines / 1 lux.
EV-1323B12 (B/W)
A1Pros chip 1/3” CCD.
420 TV lines / 0.1 lux.
(1 Input, 1 Output)
(4 Inputs, 4 Outputs)
Video amplifier compensates for video loss.
Brightness & sharpness adjustments for each channel.
NSTC or PAL compatible.
Transmits up to 3,280 ft. (1,000 meters)
LED to indicate power.
12VDC power adapter included.
Power loop through to power nearby devices.
80' range
Box Cameras
EV-132C-DWL6Q (Color)
EV-1324C12 (Color)
EV-1006-N4WQ (White Case)
EV-1006-N4BQ (Black Case)
Video Amplifiers
VA-2101B-WQ
VA-2404B-WQ
EV-1323B12DW (B/W)
18-LED IR Day/Night Cameras
Converts almost any LCD
monitor into a security monitor.
NTSC or PAL input.
Video input auto-configure.
On screen display (OSD)
functions: color, contrast, tint, and brightness.
Compact size, perfect for plug and play installation.
Desktop or wall mountable.
Input connector: BNC.
Output connector: VGA (DB15 VGA connector).
5VDC power adapter included.
Output: NTSC: 640 x 480, PAL: 768 x 576.
Power: 300mA @ 5VDC.
3
5
1
Dimensions: 5 /4'' x 2 /8'' x 1 /16''
(145 x 67 x 27 mm).
Same as EV-1323C12DWQ, but with 2.9mm lens, 120° viewing angle.
1/3" Sony CCD.
420 TV lines.
18 IR LEDs
project up to 60 ft.
4.3mm lens,
78° viewing angle.
Wiring concealed in bracket
to prevent tampering.
Weatherproof IP67 for outdoor use.
420 TV lines.
12VDC.
12 LEDs, 40' range.
1/3" Sony CCD.
420 TV lines.
12 VDC.
160mA (LEDs on), 60mA (LEDs off).
0.1 Lux. (LEDs off), 0.0 Lux (LEDs on).
12 IR LEDs
4.3mm lens, 78° view angle.
VC-1BAQ
VB-CF1Q
Bracket for installing one IR camera
and one or two VI-B1003-SBQ IR illuminators.
Video Distributors
VA-1102B-WQ
VA-1104B-WQ
(1 Input, 2 Outputs)
(1 Input, 4 Outputs)
Gold-plated BNC connectors.
Distributes single video input to multiple video outputs.
Compatible with color or black/white signals.
Transmits up to 3,280 ft. (1,000m).
NTSC or PAL compatible.
Connect to video camera,
multiplexer, VCR, DVR, etc.
LED to indicate power.
Power: 12VDC or 24VAC.
Power adapter included.
Power loop out
(VA-1102-WQ only).
USB Over Cat5 (Passive)
DE-S101Q
Extend keyboard, mouse, camera any USB devices over Cat5/ Cat5e/ Cat6.
USB 1.1 compliant.
Transmits up to 150 ft. (50m)
(low power devices even further).
1
7
7
Small size, only 2 /2” x 1 /16” x /8” (64 x 37 x 22 mm) excluding 9” (230mm) USB connection.
5
ENFORCER ®
2009 Condensed Mini Catalog
PCI Balun Hub Cards
H.264 Network DVRs
DR-104Q -- 4-Channel
DR-108Q -- 8-Channel
DR-116Q -- 16-Channel
The ENFORCER DR-1 series of Network H.264
based DVRs are the perfect units to go with the other
ENFORCER rack mount products or with any CCTV
system. Using H.264 compression allows for more
data to be stored on the Hard Disk Drive (HDD). The
DVR comes with a DVD+RW drive standard, and the
space for up to 2 SATA drives (sold separately).
Since the DR-1 series is a “Network” DVR, you can
also access the DVR over the internet to view the
stored contents remotely.
General
Rack mount size (1U+) 171/4” (44cm) wide,
161/8” (41cm) deep, and 21/4” (5.5cm) high.
Rack mount brackets included.
NTSC/PAL. NTSC 720 x 480, PAL 720 x 576.
Triplex Operation: Live/Playback, Record, Network.
Includes DVD+RW.
Dual-CODEC for H.264/MJPEG recording.
Supports Pre-Alarm Recording.
USB 2.0 port.
IR Remote Control.
Motion tracking.
Video
Video Input x 4, 8, or 16 (BNC).
Main Video Output x 1 BNC, 1 VGA.
Call Video Output x 1 BNC.
EVT-PC4-VT2Q
4-Port Video Balun Card
EVT-PC4P-JTQ
4-Port Power Disbribution Card
Optional power
distributor card.
Includes a 12VDC,
4A power adaptor.
Tri-Color LED
indicates polarity
and power present.
Removable terminal blocks for easy installation.
EVT-PC8-VTDQ
Same as EVT-PC4-VT2Q,
but with 8 ports.
Audio Input Terminal Block.
Main Audio Output x 1 RCA.
Call Audio Output x 1 RCA.
Connections
Ethernet 10/100 Mbps (RJ-45)
USB 2.0 Port.
RS-485.
Alarm
Alarm Input:
x 4 Terminal Block (DR-104Q),
x 8 Terminal Block (DR-108Q),
x 16 Terminal Block (DR-116Q).
Alarm Relay Output: x 1 Terminal Block All Models.
Alarm Detection: N.O./N.C., Programmable.
Motion Detection: 16 x 12 detection grid,
Trigger level and sensitivity adjustable.
Video Loss Detection: Programmable.
CCTV Microphone
VM-101Q
Omni-directional
pickup pattern.
RCA jack for audio output.
12VDC jack for power.
The ENFORCER CCTV Microphone is the ideal way to
add sound pickup to existing camera installations.
6
EVT-PB1-31RQ
Transmits a monochrome
video signal up to 2,000’
(610m) or color up to
1,300’ (400m).
Video, power, and data
over Cat5e/6.
Built-in multi-color LED
indicates AC or DC
power and polarity.
Removable terminal blocks.
EVT-PB1-318Q
Same as EVT-PB1-31RQ, but with RJ-45 jack instead of terminal block.
Passive VPD Balun w/ Voltage Converter
EVT-PB1-L05Q
EVT-PC8P-JTQ
Same as EVT-PC4P-JTQ,
but with 8 ports and
6A adapter.
Audio
Connects up to
4 CCTV cameras
(per PCI card) to
a central location
using low-cost
Cat5e/6 UTP cable.
Range: Up to 2,000 ft. (610m).
Simplifies and organizes PC-based DVRs.
Works with all SECO-LARM passive video baluns.
Feeds camera signals to nearly any standard DVR.
Video card is passive – no power required.
Passive Video, Power, Data (VPD) Balun
Passive VGA Balun
EVT-SBP-GQ
Transmits a VGA signal over Cat5e/6 cable.
Use with personal
computer, DVR, etc.
with VGA output to
CRT or LED monitors
or VGA projectors.
450 ft. (137m) range.
Passive device. No power required.
Sold in pairs.
Active VGA Balun
EVT-AB1-GQ
Local monitor support on transmitter end.
Extends VGA range to 590 ft. (180m)
@ 640 x 480 resolution.
Works with video signals of up to
1920 x 1440 pixel resolution.
Uses Cat5e/6
(UTP or STP).
2000 ft. (610m) video range.
Built-in power converter
similar to ST-LA105-TTQ
(see page 14).
Video, power and
data over Cat5e/6.
Built-in dual color LED
indicates power & polarity.
Built-in DC-plug power connector & data wire.
Passive VPD Balun w/ Voltage Booster
EVT-PB1-H05Q
2000 ft. (610m) video range.
Built-in voltage booster
similar to ST-HB105-TTQ
(see page 14).
Compensates DC voltage
drops over long cable runs.
Input voltage: 7~24 VDC.
Output voltage:
12 or 24 VDC jumper selectable ranges.
Vernier adjustment within each range.
Output current: 500mA @ 12/24 VDC.
Video, power & data over Cat5e/6.
Built-in dual color LED indicates power & polarity.
Built-in DC-plug power connector, data wire,
& BNC connector.
Passive VPD Balun w/ Ground Loop Isolator
Sold in pairs.
Small size, only
43/16" x 215/16" x 7/8"
(107 x 75 x 22 mm).
EVT-PB1-31RGQ
Video, power, and
data over Cat5e/6.
Built-in ground loop
isolator to prevent
grounding interference.
Built-in multi-color LED
indicates AC or DC power and polarity.
High immunity from interference built-in impedance-coupled device & noise filter.
www.seco-larm.com
Passive Video Baluns
Active IP Baluns
EVT-PB1Q
Active IP baluns
over coax or UTP
cable available.
Please see page
17 for more
information.
Gold-plated BNC connector.
Screwless terminal block for
easy installation.
Transmit range:
2,000 ft. B/W, 1,300 ft. color.
EVT-PBP-V1TQ
VG-1C12AQ
Gold-plated BNC connector.
Passive operation -- No external power required.
High immunity from interference -- Built-in impedance coupled device and noise filter.
BNC terminals for easy installation.
EVT-PB1-V1TSQ
Surge protection.
Gold-plated BNC connector.
Screw terminals for
reliable installation.
Transmit range: 2,000 ft. B/W, 1,300 ft. color.
RS-232 to RS-485 Converter
EVA-RS1
EVT-PB1-V1TGQ
RS-232 to RS-485 converter
Connects up to 32 devices.
Up to 3,900 ft.
Gold-plated BNC connector.
Built-in ground loop isolation.
Removable terminal block.
Surge protection.
Transmits B/W signal up to 980 ft.
EVT-PBM-V17Q
EVT-PBM-V27Q
Female gold-plated BNC, fits a
9
/16" x 5/8" hole in a single-gang plate.
Transmit range: Up to 2,000’ (610m).
RJ-45 connection.
4-Port Data Distributor
Active Video Baluns
Active Video Balun Transmitter
EVT-TB1-42TQ
RD-304-D1Q
The ENFORCER RD-304-D1Q RS-485 Data
Distributor transmits a single RS-485 or
RS-232 input to four (4) RS-485 outputs.
Up to 1.5 miles with active
receiver. Video, data, and
surge protection. Interlockable.
Active Video Balun Receiver
EVT-RB1-4T2Q
Up to 1.5 miles with active transmitter. Video, data, and surge protection. Interlockable.
Active Video Balun Set
EVT-AB1Q
Includes EVT-TB1-42TQ transmitter
and EVT-RB1-4T2Q receiver.
Connects up to 16 CCTV cameras using low-cost CAT5e/6 UTP cable to a central location.
Works in conjunction with passive video or active video baluns.
Compact enclosure, only 1U (1.75 inches) high.
Mounts in a standard 19-inch rack, or stacks on a shelf or table.
Built-in transient protection and interference technology for existing UTP cables.
Gold-plated BNC connectors.
Complete passive operation, no power required.
Rack-Mount Active Balun Hub
EVT-AH16-4T2Q - 16-Port Active Balun Hub
EVT-PH4-V2WOQ
Connects up to 4 CCTV
cameras to a central
location using low-cost
Cat5e/6 UTP cable.
Works with full-motion
CCTV cameras up to 2,000 feet
(610 meters) away via passive video baluns.
RJ-45 or terminal block.
Male gold-plated BNC, fits a
9/16" x 5/8" hole in a single-gang plate.
Transmit range: Up to 2,000’ (610m).
RJ-45 connection.
Passive Balun Hub
The EVT-PH16-4T2Q allows up to 16 CCTV
cameras to be connected via inexpensive CAT5e/6
UTP cable.
4-Port Passive Video Hub
Snap-In Passive Video Baluns
EVT-PH16-4T2Q - 16-Port
Ground Loop Isolator
6-inch BNC pigtail connector.
Gold-plated BNC connector.
Screw terminals for
reliable installation.
Transmit range:
2,000 feet B/W,
1,300 ft. color.
Rack-Mount Passive Balun Hub
Range: Up to 4,000’ (1,200m).
Connect up to 64 RS-485
cameras or devices.
Output: Four (4) RS-485.
12VDC power adapter (included).
Built-in surge protection and signal isolation.
Dual colored LED:
Red - RS-485 activity, Blue - Power ON.
Patent
pending
Rack-Mount or stackable.
Video In: 16 (terminal block).
Video Out: 16 (BNC connector).
Power input DC12V.
Power consumption: 500mA.
Built in video, data surge protection.
Perfect to work with DVR.
Rack-Mount Data Distributor
RD-316-R1Q - 16-Port Data Distributor
The ENFORCER RD-316-R1Q RS-485 Data
Distributor transmits a single RS-485 or RS-232
input to 16 RS-485 outputs. Can be used with any
RS-485 controlled camera, and can control up to
256 RS-485 controlled cameras by using multiple
units in a daisy-chain (home-run) configuration.
Range: Up to 4,000’ (1,200m).
Connect up to 256 RS-485 cameras or devices.
Output: Sixteen (16) RS-485.
12VDC power adapter (included).
Built-in surge protection
& signal isolation.
Dual colored LED:
Red - RS-485 activity, Blue - Power ON.
Rack or wall mountable.
7
ENFORCER ®
Pigtail Connectors
EVA-F5521-T
DC plug with screw terminals.
Black/Red
Wires
DC plug pigtail connector, 3’.
EVA-M5521-3
DC jack pigtail connector, 3’.
CCTV Accessories
CA-161R
DC plug to terminal block.
EVA-CB0R1Q
Dummy Keypad
Illuminated Power Connectors
EVA-F5521-3
2009 Condensed Mini Catalog
BNC-to-RCA Connector.
Gold-plated connectors.
EVA-WB0B1-08
6” Male-to-Female
BNC connector.
Gold-plated BNC connector.
CA-171T-02Q
RJ-45 Male to Terminal
Block with 2” cable.
CA-1616-Q
DC Plug-to-Plug
Adapter.
CA-1610-3FLQ*
DC Male Plug, 3’ wire with LED.
LED indicates power and polarity.
Patent
pending
DC Female Jack, 3’ wire with LED.
LED indicates power
and polarity.
CA-1615-06LQ*
DC Jack to Plug,
6” wire, with LED.
LED indicates power
and polarity.
2009 SECO-LARM Catalog
CBA Series Dummy Cameras
VD-10BNA Dummy Box Camera
VD-10PL Dummy IR Bullet Camera VD-10BN
VD-20NN
VD-30BS
VD-40BN
VB-HC1
with Real Working IR LEDs
Dummy Security Camera
Dummy Dome Camera
Dummy IR Bullet Camera
Dummy PTZ Speed Dome
Ceiling Mount Bracket
for PTZ Speed Dome
CA-1515-Q
DC Jack-to-Jack
Adapter
CA-1526-1FQ
DC Jack to Double DC Plug, 1’ Wire.
CA-1536-1FQ
VD-20NN
Realistic dome camera with lens module.
DC Jack to Triple
DC Plug, 1’ Wires.
Keypad LEDs flash.
Keypad “beeps” when keys are pressed.
Weather-resistant for outdoor use.
Uses 2 or 4 (AAA) batteries.
CA-1510-3FLQ*
KD-100Q
VD-10BN
Weatherproof Metal Housing, with realistic camera module with battery powered LED.
The 2009 SECO-LARM Catalog is now
available.
To order a copy or to be put on the mailing list,
e-mail us at [email protected], fax us at
(949) 261-7326 or call us at (800) 662-0800,
(949) 261-2999 for California or International.
See back page for details.
Access Control Power Supply
EAP-5D1
12 or 24 VDC
Supply Current: 5A @ 12VDC / 4.5A @ 24VDC
AC power failure supervision relay.
Battery failure supervision relay.
Selectable delay timer (5 sec., 5 min., 5 hours)
for AC failure supervision relay.
LED overload indicator and automatic shutdown for
short-circuit protection.
Over-current fuse-protected AC input.
Built-in back-up battery charger.
Automatically switch to back-up battery if AC fails.
Individual AC input and DC output LED status
indicators.
Snap-In DC Connectors
CA-161T-02SQ
DC Plug to Terminal Block, 2.5” Wire.
CA-151T-02SQ
DC Jack to Terminal Block, 2.5” Wire.
Snap-In DC Connectors with LED
VD-10PL
Real working IR LEDs
(on at night, off
during the day).
Power adapter
not included
VD-30BS
Realistic camera with video/power cable with battery powered LED.
Access Control Power
Supply Board Only
CA-161T-02SLQ*
DC Plug to Terminal Block, 2.5” Wire, LED.
LED to indicate power and polarity.
VD-40BN
CA-151T-02SLQ*
DC Jack to Terminal Block, 2.5” Wire, LED.
LED to indicate power and polarity.
VD-10BNA
Realistic box camera with video/power cable.
*U.S.A. and international Patents pending.
8
Batteries not included
Realistic PTZ dome camera with wall mount bracket and battery powered LED.
Matching ceiling bracket available: VB-HC1
EAP-5D1M
AC power failure supervision relay.
Battery failure 5A, 250VAC main fuse.
supervision relay.
Over-current fuse-protected AC input.
23
23
Dimensions: 7” x 4 /32” 1 /32”. (180 x 120 x 45 mm).
www.seco-larm.com
Electromagnetic Locks
Relay, LED, Timer Maglocks
E-941SA-1K2PD
E-941SA-1200
E-941SA-600
Single-Door with Relay, LED, Timer
E-941SA-1200
E-941SA-600
Holding force:
E-941SA-1200: 1,200 lb. (545kgs)
E-941SA-600: 600 lb. (272kgs)
Anodized aluminum housing.
Dual voltage: 12 or 24 VDC (selectable).
No residual magnetism.
Detachable faceplate.
Adjustable mounting bracket.
Mounting hardware included.
“Z” brackets, “L” brackets, and spacers available.
Mounting Brackets
“Z” Brackets
E-941S-600/ZQ (for 600-lb. series locks)
E-941S-1K2/ZQ (for 1,200-lb. series locks)
“L” Brackets
E-941S-600/LQ (for 600-lb. series locks)
E-941S-1K2/LQ (for 1,200-lb. series locks)
“U” (glass door) Brackets
E-941S-600/UQ (for 600-lb. series locks)
E-941S-1K2/UQ (for 1,200-lb. series locks)
Plate Spacers
E-941S-600/PQ (for E-941SA-600)
E-941S-1K2/PQ (for E-941SA-1200)
Armature Plate Holder
E-941S-600/HQ (for 600-lb. series lock)
E-941S-1K2/HQ (for 1,200-lb. series lock)
Similar to
E-941SA-1200
but includes:
Status sensor
relay output.
2-color status LED:
Green (locked),
Red (unlocked).
Delay time (1-78 seconds).
E-941SA-600PD
Similar to E-941SA-1K2PD,
but 600 lb. holding force.
Double-Door Maglocks
E-941DA-1K2P
Double-Door with Relay, LED, 1,200 lb.
Electromagnetic Gate Locks
E-942FC-1300
Ideal for slide
or swinging gate.
Holding force —
1,300 lb. (591kgs).
Water and vandal-resistant.
Dual-threaded conduit fitting.
1
6 /2' hookup cord.
12 or 24 VDC.
"Z" and "L" brackets available.
E-942FC-600
For slide or
swinging gate.
Holding force —
600 lb. (272 kgs).
Water and vandal-resistant.
Dual-threaded conduit fitting.
1
6 /2' hookup cord.
12
or 24 VDC.
"Z" and "L" brackets available.
Gate Lock Mounting Brackets
“Z” Brackets
E-942F-1300/Z
(for E-942FC-1300)
E-942F-600/Z
(for E-942FC-600)
Gate Locks with Weldable Brackets
E-942FC-1K3SQ
1,200 lb. holding
force for each door.
12 or 24 VDC (selectable).
Status-sensing relay output and 2-color status LED
(green: locked, red: unlocked).
E-941DA-600P
Double-Door with Relay, LED, 600 lb.
1,300-lb. holding force
Includes E-942FC-1300 gate lock with brackets for lock and armature.
For outdoor sliding or swinging electric gates.
Weld or bolt brackets directly to gate.
Corrosion-resistant zinc-plated brackets.
Black finish to match most gates.
Lock is water-resistant
and vandal resistant.
Adapter and mounting
hardware included.
Similar to E-941DA-1K2P, but
600 lb. holding force per door.
80Lb. and 300Lb. Mini Electromagnetic Locks
E-941SA-300
E-941SA-80Q
For cabinets and
small enclosures.
Holding force — 300 lb. (136kgs).
36" hookup wire included.
Input voltage — 12VDC.
Current draw — 315mA @ 12VDC.
For small, low-security
drawers or cabinets.
Holding force —
80 lb (36kg) @ 12VDC
110 lb. (51kg) @ 24VDC.
12 ~ 24 VDC.
E-942FC-600SQ
600-lb. holding force
Includes E-942FC-600 gate lock with brackets
for lock and armature.
For outdoor pedestrian electric gates.
Weld or bolt brackets directly to gate.
Corrosion-resistant zinc-plated brackets.
Black finish to match most gates.
Lock is water-resistant
and vandal resistant.
Adapter and mounting
(Magnetic lock portion only)
hardware included.
9
ENFORCER ®
2009 Condensed Mini Catalog
Electric Door Strikes
Electric Shear Lock
SD-993B-SS
SD-995C
1,500-lb
Shear Lock
For use in metal doors.
Field-programmable in seconds
for fail-secure or fail-safe.
Holding force —
1,500 lb. (680kgs).
Small size for use with most metal door jambs.
Works with sliding, single-action and
double-action (swing-through) doors and gates.
Fail-safe operation.
12 or 24 VDC.
Rim-Type Exit Device
SD-962AR-36A
For exit doors -- Allows exit from
inside while locked from outside.
Reversible non-handed design.
For metal or wood doors.
Stainless-steel 3/4" throw latch bolt.
Deadlocking latch.
Can be unlocked for extended periods of time.
Fits doors from 30" to 48" wide.
Heavy-duty steel construction.
SD-993S-SB
Surface mount bracket
Use with optional digital keypad such as
SECO-LARM’s SK-1011-SQ or SK-1131-SQ
for keyless high security.
ANSI-sized — 47/8" x 11/4" x 11/4"
Reversible for right-hand or left-hand doors.
Jaw strength — 2,000 lbs.
Stainless-steel lip (keeper) for strength and long life.
Non-polarized connection.
Shallow design for use with most doors.
Powered by a solenoid.
Tested to 1 million cycles.
Current draw — 250mA @ 12VDC.
For surface mounting of shear lock (when recessed mounting is not possible).
SD-993S-UB
U-Bracket
U-bracket for mounting
on most glass doors.
Electric Deadbolts
SD-995C24
SD-997BQ
Same as SD-995C, but 24VDC.
Current draw — 150mA @ 24VDC.
Fail-safe
operation
SD-994C
For concealed mounting.
5
/8” (17mm) bolt extension.
Fail-safe operation.
12VDC input.
Narrow design,
(77/8" x 15/16", 200 x 32 mm).
Door position monitoring output (N.O./COM/N.C.).
SD-997AQ
Fail-secure
operation
lock knob
Similar to SD-995C, but
for use in wood doors.
Use with optional digital keypad such
as SECO-LARM’s SK-1011-SQ or
SK-1131-SQ for keyless high security.
ANSI-sized — 715/16" x 17/16" x 13/8".
Reversible for right-hand
or left-hand doors.
Jaw strength — 2,000 lbs.
Stainless-steel lip (keeper)
for strength and long life.
Non-polarized connection.
Current draw — 250mA @ 12VDC.
SD-994C24
Similar to SD-997BQ,
but fail-secure
(locks when power
disconnected).
Incorporates manual
lock/unlock cylinder
to operate the
SD-997AQ if power is lost.
SD-997SMBQ
Surface-mount
bracket set for SD-997BQ.
10
Push-to-Exit Bar
SD-961A-36
Redesigned _
Easier to install.
Pushing the bar sends a signal to release a
lock, sound an alarm, activate a camera, etc.
Rugged, heavy-duty construction.
For 36-inch doors (actual length is 34.5 inches).
Includes 2 built-in dual-contact switches
(5A @ 125VAC).
Includes SECO-LARM SD-969-A18 Armored Door Cord.
Door Closer
SD-C141S
Same as SD-994C, but 24VDC.
Current draw — 150mA @ 24VDC.
Surface-type door closer.
No-handed operation
(reversible).
Separate adjustment of
both closing and latch
speeds.
Aluminum and
steel construction.
For metal or wood doors.
Armored Door Cords
keylock
SK-990AQ
SK-990BQ
SD-969-S18
SD-969-A18
For use in wood doors.
Designed to conduct power to electric locks or access control devices mounted in doors.
18” Stainless-steel cable.
Mounting screws included.
SK-990AQ Fail-secure --Power-off locking. Power unlocking.
For entrance doors.
SK-990BQ Fail-safe --- Power locking.
Power-off unlocking.
Connect to optional keypads including
SECO-LARM’s SK-1011-SQ or SK-1131-SQ.
Baked painted finish.
SD-969-S18
SD-969-S18
--- Die-cast aluminum end caps.
SD-969-A18
--- Plastic end caps.
SD-969-A18
www.seco-larm.com
No-Touch Sensor
SD-927PKC-NEQ
No Touch -- just wave a
hand in front of sensor.
Sensing range up to 4" (10 cm).
Attractive "ring" illuminator turns from green to red when the sensor is activated.
Reduce the risk of
cross contamination.
Easy and clean operation.
Reliable IR technology
senses motion.
Video Door Phone
Vandal-Resistent Outdoor Keypad
SK-3023-SQ
DP-121Q
The Video Door Phone displays an image of the visitor
in real-time on the phone’s monitor, and a built-in
microphone and speaker on the camera unit lets users
communicate with visitors. Authorized visitors can then
be granted entry with a push of a single button.
Individual keys are
backlit and the entire
keypad is illuminated
for easy nighttime use.
SD-927PKC-NSQ
Unique faceplate
hinge allows for
easy installation.
Same as SD-927PKC-NEQ,
but in Spanish.
For home or business use.
Camera has 6 LEDs for nighttime operation.
Remotely and securely talk to visitors.
Remotely unlock doors, gates, etc. from the monitor.
Camera and monitor turn on and off with the push
of a button.
Camera and monitor turn off automatically when
not in use.
Adjustable contrast, brightness, and ringer volume.
SD-927PWC-NEQ
Same as SD-927PKC-NEQ,
but with white plate &
white body.
DP-121-SQ
Additional Monitor
Stand-Alone Proximity Reader
DP-121-CQ
(Maximum of 2 cameras &
2 monitors per system.)
Mullion Weatherproof Keypad
Additional Camera
Access Control Keypads
1 Output: Form “C”
relay output (5A @ 28VDC).
100 unique 4-8 digit codes.
Stainless-steel face.
Easily delete individual codes.
Programmable wrong code lockout.
Programmable output relay activation buzzer
Relay output inhibit control.
Auto or manual code entry checking.
Egress input.
Built-in tamper (N.C.) circuit.
EEPROM memory: Prevents data loss.
Power: 12-24V AC/DC.
Back box included.
Stand-alone Proximity Card Reader.
Use in small businesses, homes, gates, parking structures, apartments and other locations.
Sealed and weatherproof (IP67). Mounts easily to interior or exterior walls.
Attractive tri-color wave-shaped bar lights to indicate proximity reader's mode and status:
Blue
Valid Card
Green Programming Mode
Red
Invalid Card
Output relay for either timed (1 to 180 seconds) or "Toggle" mode.
Egress input for simple exiting of protected area.
Buzzer is programmable for audible confirmation or silent mode.
Up to 100 user cards can be programmed.
User cards easily deleted. Delete a single card, or all cards.
10 Cards included.
PR-K1S1-A
Additional cards. Sold in packs of ten.
SK-1131-SQ
SK-2013-SQ
SK-1011-SQ
PR-112S-A
Rugged stainless-steel construction for outdoor use.
Individual keys are backlit. Entire keypad illuminated automatically at dusk for easy nighttime use.
Unique faceplate hinge allows for easy installation.
500 user codes, 2-8 digits.
Over 100 million code combinations.
All features are programmable from the keypad.
Buzzer confirms functions & coding.
Two 5-Amp Form “C” relays.
Egress input.
12-24 VDC/VAC.
Built-in Tamper Switch.
Door-forced-open & door-propped open alarm outputs.
Operates fail-safe or fail-secure locking devices.
Similar to SK-1011-SQ, but
with 120 users, 3 outputs,
backlit keys, mantrap, alarm
output, door forced open
warning, duress output, door
auto relock, and other
advanced features.
(Keys are backlit)
100 user codes, 2~8 digits.
All features are programmed directly from the keypad: No need for an external programmer.
Keypad can be programmed to emit beeps for key presses or operate in silent mode.
2-Amp relay (Form “C”) N.O./C/N.C.
Tamper switch: N.C. dry contact 1 Amp @ 12VDC
Egress input can be programmed from 1 to 99 seconds.
Circuitry is epoxied for use in
extreme weather conditions
(IP66 weatherproof rating).
EEPROM memory protects programmed information in case of power loss.
Keys are
backlit for easy
nighttime use.
Tamper switch for
extra security.
11
ENFORCER ®
Mushroom R-T-E Plates
SD-7201GC-PE1
Stainless-steel face-plate.
“Exit” and “Salida.”
Green mushroom cap push-button.
N.O./N.C. contacts rated
5A @ 125VAC.
SD-7201GF-PE1
Similar to SD-7201GC-PE1 but with DPDT switch.
Two N.O. and two N.C. contacts, each rated 5A @ 125VAC.
SD-7201RC-PE1
Similar to SD-7201GC-PE1
above, but with Red “Mushroom”
Push Button.
2009 Condensed Mini Catalog
Illuminated R-T-E Plates
SD-7202GC-PE
1
Green, 1 /2” dia., illuminated,
mushroom-cap.
N.O./N.C., DPST contact rated 5A.
“EXIT” and “SALIDA”.
SD-7103GC-PE
Stainless-steel slimline plate.
Green illuminated momentary button
(15/16 x 11/16”), with long-life green
12V LED. N.O./N.C. contacts.
Includes: “PUSH TO EXIT” & “PRESIONE PARA SALIR".
Similar to SD-7201GC-PE1,
but with white plate.
No exposed screws.
RF Wireless R-T-E Plates
2” square blue, illuminated, momentary push button.
N.O./N.C. contact rated
10A @ 125~250VAC.
Handicap symbol.
R-T-E Plates with Timer
SD-7275SGEX1Q
12
SD-71051-V0
Momentary switch,
slimline plate.
Stainless-steel plate.
Includes shunt ON (N.C.),
momentary OFF (N.O.)
spring-loaded keylock switch.
Key is removable from
the ON position only.
SD-7201GA-PT1
Stainless-steel plate.
Includes maintained ON/OFF keylock switch.
Key is removable from the ON
or OFF position.
Similar to SD-7201GC-PE1
above, but with Timer.
Built-in timer, 1~60 seconds.
Buzzer output for audio status.
“Exit” and “Salida.”
Similar to SD-7103GC-PE above, but
with Timer and SPDT contacts.
Built-in timer 1~60 seconds.
Buzzer output for audio status.
SD-7175SGEX1Q
Slimline Vandal-Resistant
1” diameter Illuminated
Red/Green pushbutton.
SD-7185SGEX1Q
SD-7285SGEX1Q
Single Gang Vandal-Resistant
1” diameter Illuminated Red/
Blue Pushbutton.
Slimline Vandal-Resistant
1” diameter Illuminated
Red/Blue pushbutton.
SD-7295SGEX1Q
SD-7195SGEX1Q
Single Gang Vandal-Resistant
1” diameter Illuminated White
Pushbutton.
Momentary switch,
single-gang plate.
SD-72002-V0
Vandal Resistant, Illuminated Request-to-Exit (R-T-E) Plates
Single Gang VandalResistant 1” diameter
Illuminated Red/Green
Pushbutton.
SD-72051-V0
Similar to SD-7202GC-PE,
but with Timer.
Built-in timer 1~60 seconds.
Buzzer output for audio status.
SD-7103GC-PT
See Page 3
for details.
R-T-E Key Switch Plates
SD-7202GC-PT
SD-7201WC-PEQ
All SECO-LARM R-T-E
Plates are available in
white as well as without
printing (blank). Or,
SECO-LARM will do
customized printing.
Contact SECO-LARM
for details.
Push-To-Exit Button with switchable English & Spanish Message.
Large (2" square), illuminated
green push button.
N.O./N.C. contacts rated
10A @ 125VAC.
SD-7202BC-HC
SD-7251GCEX1Q
Additional R-T-E Plates
Slimline Vandal-Resistant
1” diameter Illuminated
White pushbutton.
SD-72051-V0
SD-72002-V0
Shunt switch, single-gang plate.
SD-71002-V0
Shunt switch, slimline plate.
SD-71051-V0
SD-71002-V0
Push Button R-T-E Plates
SD-7101KBPE1Q
Black N.C. push button.
SD-7101RAEX1Q
Red N.O. push button.
SD-7201KBQ
Single-gang plate.
Black push button.
N.C. switch.
Vandal Resistant R-T-E Plates
SD-7104SGEX1Q
Slimline Vandal-Resistant
1” diameter pushbutton.
N.O./N.C. contacts.
SD-7204SGEX1Q
Single Gang VandalResistant 1” diameter
pushbutton.
N.O./N.C. contacts.
www.seco-larm.com
Curtain/Barrier Sensors
Twin Photobeam Detectors
Outdoor range:
90’ (30m)
E-960-D190Q
Outdoor range:
190’ (60m)
E-960-D290Q
Outdoor range:
290’ (90m)
With laser beam alignment,
12 to 24 VDC/VAC
For indoor or outdoor use.
N.O. or N.C. alarm output.
N.C. tamper circuit included.
Interruption time adjustable.
Built-in laser beam alignment system makes
for quick, easy installations.
Multi-Frequency Photobeam
E-964-D390Q
Outdoor range:
390’ (120m)
4 Frequencies to
eliminate interference.
The E-964-D390Q has all the same features as the E-960-D90Q, D190Q, and D290Q, including laser beam alignment.
Incorporates a 4-frequency function (programmable) to eliminate the possibility of interference when multiple photobeams are located within close proximity.
Quad Photobeam Detectors
E-964-Q165Q
Outdoor range:
165’ (50m)
E-964-Q330Q
2-Beam
E-9611-2B25 - Black Enclosure
E-9611-2W25 - White Enclosure
E-931-S35RRQ (35' Range)
111/4” (28.5cm) long
Range: 25 ft. outdoor, 50 ft. indoor
For windows, doorways, skylights, etc.
Rugged aluminum construction.
LED alignment indicator.
No synchronizing wires required.
5
7
Slim-line design (1 /16” x /8”).
Trigger by breaking 2 adjacent or any
1 single beam (programmable).
4-Beam
E-9622-4B25 - Black Enclosure
E-9622-4W25 - White Enclosure
221/2” (57cm) long
Range: 25 ft. outdoor, 50 ft. indoor
Uses 12~240VDC / 24~240VAC.
Pre-wired 6-foot cord.
Dark ON operation.
Weatherproof (IP 66) construction for indoor/outdoor usage.
Brackets (2) and mounting hardware included.
E-931ACC-RCQ
3” Round Reflector.
E-931ACC-R
Similar to the E-9611-2B25 but 4 beams and 221/2 inches long.
Use in doorways, overhead doors and other large openings.
2” Square Reflector.
E-931ACC-HRQ
6-Beam
E-9644-6B25 - Black Enclosure
E-9644-6W25 - White Enclosure
441/2” (113cm) long
Range: 25 ft. outdoor, 50 ft. indoor
Hood for the E-931ACC-RCQ
or E-931ACC-R Reflector.
Flush-Mount Beam Sensors
Flush-Mount Sensors
E-932-D33TBQ
Similar to the E-9611-2B25 but 6 beams and 441/2 inches long.
Use in doorways, overhead doors, and other large openings.
Photoelectric Through-Beam Sensor
Range: 33 ft.
Dual
Beam
8-Beam
E-9660-8B25
Black 60” (152cm) long
Range: 25 ft. outdoor, 50 ft. indoor
Similar to the E-9611-2B25 but 8 beams and 60 inches long.
Use in doorways, overhead doors, and other large openings.
Black enclosure only.
E-932-S16RRQ
~
E-960-D90Q
Reflective Beam Sensor
Photoelectric Reflective-Beam Sensor
Range: 16 ft.
Outdoor range:
330’ (100m)
E-964-Q495Q
E-964-Q660Q
Outdoor range:
660’ (200m)
Multi-frequency (4 channels selectable).
Reduces interference between multiple
units installed in close proximity.
Weatherproof, sunlight-filtering case for indoor
& outdoor conditions.
Anti-frost system with built-in heater.
N.C./N.O. alarm output. N.C. tamper circuit.
Quick, easy installation with built-in laser beam & audible alignment system.
Built-in alignment strength indicator.
10-Beam
E-9680-10B25
Similar to the E-9611-2B25 but 10 beams and 80 inches long.
Use in doorways, overhead doors, and other large openings.
Black enclosure only.
Flush mount design.
Fits single-gang box.
For entrances, hallways, offices, etc.
Single Photobeam Detector
Black 80” (203cm) long
Range: 25 ft. outdoor, 50 ft. indoor
~
Outdoor range:
495’ (150m)
E-961-S90W
90' (30 meters)
sensing distance.
IP66 for indoor
and outdoor use.
o
Mounts flat or at 90
to the wall with no need
for extra brackets.
Adjustable lens angle.
13
ENFORCER ®
2009 Condensed Mini Catalog
12VDC Plug-in Switching AC Adapters
ST-UV12-S0.5Q 0.5 Amp
ST-UV12-S1.0Q 1.0 Amp
ST-UV12-S2.0Q 2.0 Amp
Sideways plug for ease of
ST-UV12-S1.0Q
use on power strips.
Shown
Universal 100-240VAC input.
Regulated
12VDC
output.
6’ cord, 2.1mm plug (positive center).
Low power consumption.
Fits easily on
power strip
Efficiency
Level
Tabletop Switching Power Supplies
ST-UV12-S3.0Q 3.0 Amp
ST-UV12-S4.0Q 4.0 Amp
ST-UV12-S5.0Q 5.0 Amp
LED power indicator.
ST-UV12-S3.0Q
Shown
Universal 100-240VAC input.
Regulated 12VDC output.
6’ cord 2.1mm plug (positive center).
Includes AC power cord
(IEC320-C13).
LED power
Low power consumption.
indicator
Power Supply Chargers
ST-1206-1.5A
ST-2406-2A
ST-2406-3A
ST-2406-5A
ST-2406-7A
ST-2406-10AQ
Voltage Booster
ST-HB105-TTQ
Compensates for DC voltage
drops over long cable runs.
Input voltage: 7-24 VDC
Output voltage:
12 or 24 VDC (adjustable).
Output current: 500mA @ 12/24 VDC.
Input power LED indicator.
Multi-color LED indicates output voltage.
Terminal block connection for secured wiring.
14
ST-2406-2A
SA-026Q
SA-027Q
Model #
Voltage Current Current
(DC)
(peak)
6,12
1.5A
2.0A
6,12,24
1.5A
2.0A
ST-2406-3A
6,12,24
2.5A
3.0A
ST-2406-5A
6,12,24
ST-2406-7A
6,12,24
ST-2406-10AQ 6,12,24
4.0A
7.0A
9.0A
5.0A
7.5A
10.0A
16VAC/100W
24VAC/50W
24-28VAC/100W*
24-28VAC/180W*
28VAC/350W
* Dual-voltage output: 24VAC or 28VAC
Dual input voltage: 120/240VAC, 50/60Hz.
Works with the SECO-LARM series of power supply/chargers.
Shielded windings to
reduce electromagnetic
interference.
ST-2406-2A
ST-UV16-W100Q
ST-UV24-W50Q
ST-UVDA-W100Q
ST-UVDA-W180Q
ST-UV28-T350Q
ST-1206-1.5A
Open-Frame Transformers
Miniature: 11/4" x 2" x 3/4".
Adjust from 1 to 60 secs.
Buzzer output.
Form-C relay.
Programmable Annual Timer
ST-LA105-TTQ (0.5A)
ST-LA110-TTQ (1.0A)
Triggered by positive
voltage (+DC), closure of dry contact, or opening of dry contact.
Adjust from 1 sec. to 60 min.
Form-C relay.
Regulated and
filtered output voltage.
Short-circuit protection.
Thermal protection and compensation.
Built-in backup battery charger.
Switches to backup battery automatically ST-2406-10AQ
in case of power loss.
Fused protection for battery charger.
2 LEDs to indicate AC power input and DC
power output status.
Compatible with lead acid or gel-type rechargeable battery.
Reverse polarity protected.
Voltage Converters
Converts 8~30 VAC/VDC
to a regulated 5/12/24 VDC
output (adjustable).
Output voltage: 5/12/24 VDC
(selectable & adjustable).
Input voltage: 8~30 VDC/VAC.
Small size for easy installation.
Input power LED indicator.
Multi-color LED indicates
output voltage.
Terminal block connections
for secured wiring.
SA-025Q
Convert low-voltage AC input
power to low-voltage DC output power.
Efficiency
Level
Programmable Timers
365 day annual timer.
12~24 VDC/VAC Operation.
Two N.O. or N.C. form “C” relays:
[email protected] / 28VDC.
Each relay can be programmed for 50 events, total of 100 individual programmable events.
100 programmable events can be set weekly, daily or hourly 365 days a year.
One egress input per relay (2 total).
Block programming allows events to be repeated on consecutive days.
First person in function interrupts the normal operation of the annual timer.
Event output can be shunt or momentary, and
momentary output can be programmed for
1~99 seconds.
10 programmable holidays.
Built-in clock back-up battery.
Built-in backup battery charger for external back-up battery use.
Alpha-numeric and back lit LCD display for easy programming.
Relay Board
SR-2224-C5Q
5-Amp relay, DPDT, Form-C.
6/12/24 VDC operation.
LED indicates power.
12VDC Linear Power Supply
ST-1212-R0.5A
500mA, Regulated
Use in CCTV, access
control alarms, etc.
6' line cord, 2.1mm
positive center coax plug.
www.seco-larm.com
Low Battery Cutoff
ST-BD01Q
The ENFORCER Low-Voltage Battery Cut-Off
prevents the deep discharge of a backup battery.
The ST-BD01Q ties directly into most 12 or 24 VDC
power supplies or alarm panels for easy plug-andplay installation.
New Magnetic Contacts
SM-431-T
Quick-Connect
Surface-Mount
For N.C. circuits.
Quick-connect terminal block.
1" gap.
Available in brown, white.
SM-433-T
Selectable input 12/24VDC.
Adjustable voltage cut-off and restore point.
Master On/Off switch.
Green LED AC power indicator.
Dual-color DC LED indicator.
Includes battery leads
and double-sided tape.
5-in-1 Battery Tester
Concealed Screws Surface-Mount
For N.C. circuits.
Concealed screw terminals.
1
1 /4" gap.
Available in brown, white.
SM-407-5T
Quick-Connect
Recessed Mount
For N.C. circuits.
Quick-connect terminal block.
3
/4" gap.
Available in brown, white.
These SECO-LARM contacts incorporate
Gold-Plated Terminals to help increase the life
of the contact. In addition, most SECO-LARM
contacts incorporate reed switches with a superior
breakdown voltage and a deactivated rhodium
plating to eliminate absorption of organic impuritites,
polymer growth during operation, and the possibility
of contact freezing, especially at the lower voltage
levels normally used in security systems.
ST-BT01Q
The ENFORCER
ST-BT01Q is more
than just a battery
tester. Additional
features make it the
perfect tester for
your tool box.
Tests:
1. Voltage
2. Battery Load
3. Voltage Drop
4. Polarity
5. PTC fuse
Voltage testing via 4 LEDs.
Selectable 500mA or 1A load.
Voice Dialer
E-920A
Recessed
SM-207
3
N.C. /8” press-fit mount
with leads. 1” gap.
N.C. mini 3/8” press-fit mount
with leads. 3/8” gap.
SM-207-5L
2 independent channels. Stores up to 4 numbers.
Delivers message of up to 16 sec. to each number.
Repeats message to ensure full delivery.
EEPROM retains memory.
Optional 9-Volt internal battery.
Use worldwide due to Universal Dial Tone.
Use with PBX or regular telephone systems.
SM-226L-3
N.C./N.O. overhead door with
L-bracket. 23/4” gap.
SM-226R
N.C. overhead door with round
bracket. 24” cable. 23/4” gap.
Surface-Mount
SM-200
N.C. surface mount with
screw terminals. 3/4” gap.
Includes cover.
SM-823 -- Additional terminal cover.
SM-300
N.O. surface mount with screw
terminals. 3/4” gap. Includes cover.
Wide Gap
SM-216
N.C. wide-gap surface mount with
screw terminals. 23/4” gap.
SM-216M -- Magnet for SM-216.
SM-217
N.C. wide-gap mini surface
mount with concealed screw
terminals. 2” gap.
Screen
SM-209
N.C. mini /8” press-fit mount
with leads. 1” gap.
N.C. mini self-stick surface mount for screens, with leads. 3/4” gap.
SM-206
SM-266
3
Self-Stick
N.C. overhead door with L-bracket.
24” stainless-steel cable. 23/4” gap.
N.C. 1/4” recessed mount with leads. 1” gap.
SM-226L
SM-207-5
Automatically dials up to 4 telephone numbers and
delivers up to 2 different messages when triggered by
an alarm system.
Overhead Door
SM-204
N.C. mini self-stick surface mount
with flange and center leads. 1” gap.
SM-204M -- Magnet for SM-204/205.
SM-205
N.C. self-stick surface mount with
flange and side leads. 1” gap.
SM-204M -- Magnet for SM-204
and SM-205.
N.C super-thin screen mount
with leads. 11/4” gap.
Magnetic Contact Accessories
SM-852L
Aluminum L-bracket for SM-226L.
Alnico 5 magnet, 11/4” x 1/4” dia.
Alnico 5 magnet, 15/8” x 3/8” dia.
Aluminum “Z”-bracket for SM-216
SM-831
SM-841
SM-851
15
ENFORCER ®
2009 Condensed Mini Catalog
SS-090
2 terminals, shunt SPST.
Maintained ON-OFF, key removable from both ON and OFF positions.
Specify key number when ordering.
SS-090-1
Similar to SS-090, but key removable in OFF position only.
SS-095
2 terminals, momentary SPST.
Maintained OFF, springs back from ON, key removable from OFF only.
Specify key number when ordering.
SS-092-2
Two internal SPST switches, one always ON, one always OFF.
SS-090KN
Extra keys. Specify number.
Detectors and Switches
SS-078Q
N.O. latching panic button.
N.C. latching panic button.
N.C. vibration/shock sensor.
Adjustable sensitivity.
For 5- to 14-Volt use.
SL-126-A24
(SL-126)
For 9- to 28-Volt use.
Easy 2-wire connection
for 5V to 14VDC
or 9V to 28VDC.
Easy 2-wire installation.
Perfect for "informative" household burglar alarm use.
Incorrect polarity cannot damage circuit or draw current.
Low current consumption with long operating lifespan of over 300 continuous hours (2,000,000 flashes).
Choice of amber, blue, clear, or red lens.
Lens is made of high-impact resistant acrylic, case
of high-impact resistant ABS plastic.
SL-126L -- Extra lens for SL-126 and SL-126-A24. Choose amber, blue, clear, or red.
Buzzer
SH-504Q
Miniature 85dB electronic buzzer.
5-15VDC, surface mount or mount
in 3/4" (19mm) hole of alarm panel
or remote plate.
Low current drain of 35mA @ 12VDC.
Sirens
N.O. tamper switch.
N.C. tamper switch.
SH-532L
SS-073Q
SS-074
N.O. double-button
momentary hold-up switch.
Emergency & Push-To-Exit
N.O. or N.C. (selectable)
momentary contact.
3 labels included.
3-tones.
128dB multi-tone.
Miniature size, 4” long, 3½” diameter. 6-12VDC, 1.4A current drain.
Glass Break Detector
Toggle switch.
Available in gray or white.
SS-038-2CSBO
Shadow/eyeball switch.
SS-032/RD
Red N.O. pushbutton.
SS-033/BK
Black N.C. pushbutton.
E-931ACC-SQ
Additional Speaker/Chime
for the E-931CS22RRCQ.
Remote Plates
SS-199
Stainless steel slimline plate
with 3/4” D-hole.
SS-229
Same as SS-199, but single gang with Red, Green LEDs.
SS-299
Audio Discriminator.
Patented design detects high-frequency sound of
glass breaking while
filtering out ambient environmental noise.
When ceiling mounted, protects to a 25 ft. radius.
Protects 45 ft. to the front and 25 ft to either side.
YELLOW AND RED LEDs MAKE THE DIFFERENCE
SECO-LARM’s patented yellow turbulence LED reduces
false alarms by offering easy pinpoint sensitivity
adjustments without external test meters. The yellow LED
flashes to indicate that the ambient environmental noise
is too high, and may cause false alarms. This allows the
installer to instantly change the sensitivity to fit the noise
level at virtually any site. The red LED indicates an alarm
condition. With the two LEDs, setting sensitivity is both
simple and accurate.
Same as SS-199, but single-gang.
Flashlights
X-L421-B2W2
Compact light (size 6"L x 1"D).
2 AA-cell batteries,
nylon belt pouch.
X-L461-B2W2
ENFORCER 190
SS-076Q
Counter for the
E-931CS22RRCQ.
N.O. “EMERGENCY” button.
SS-075C-PE
E-931ACC-CQ
SS-075Q
For entrance monitoring
or entrance indicator.
“Ding-dong” or siren
sound on beam
interruption.
Plug-in components.
No hard wiring needed.
Includes reflector,
brackets, 9VDC adapter,
mounting hardware, chime.
Optional counter also available.
SH-515
Warble Tone Siren
Weather-resistant black
ABS trumpet
5” Dia. (127 mm)
6-12VDC, 500mA at 12VDC
SS-072Q
16
E-931CS22RRCQ (22' range)
SL-126
SS-077Q
SS-040Q
Entry Alert System
Strobe Lights
Key Locks
Magnetic flex light.
18" flexible shaft with
heavy-duty magnet.
Includes spare bulb
and 2 AA-cell batteries.
AC Pigtails
CA-1K1B-1FQ
Grounded plug to grounded jack.
6” cord.
CA-1L1A-1FQ
Angled grounded plug to grounded jack.
6” cord.
CA-1K2A-1FQ
Grounded plug to 2 grounded jacks.
6” cord from the
splitter junction.
CA-1K1A-1FQ
Grounded plug to IEC320-C13 plug.
6” cord.
www.seco-larm.com
MAE-P115-01Q
Analog audio balun
Component Video Balun
Composite Video Baluns
Audio Baluns
A/ V
Multi-Media
RCA to terminal block.
Transmits audio 1,000 ft.
(300m) over Cat5e/6 UTP cable.
Gold plated connectors.
MAE-P215-01Q
Digital audio balun
RCA to terminal block.
Transmits digital audio 600’
(180m) over Cat5e/6 UTP cable.
Supports Dolby Digital, DTS.
Gold plated connectors.
MAE-P127-01Q
Snap-in analog audio balun
Easily snaps in or out of wall plates or patch panels.
RCA to RJ-45 jack.
Transmits audio 1,000 ft.
(300m) over Cat5e/6 UTP cable.
Gold plated connectors.
MAE-P227-01Q
Snap-in digital audio balun
Easily snaps in or out of wall plates or patch panels.
RCA to terminal block.
Transmits digital audio 600’ (180m) over Cat5e/6 UTP cable.
Supports Dolby Digital, DTS
Gold plated connectors.
MVE-PB010Q
Composite Video Balun
A/ V
Multi-Media
RCA to terminal block.
Transmits composite video
YPbPr or RGB video signals.
With screwless terminal block
connection and passive operation.
MVE-PB020Q
Snap-in Composite Video Balun
Transmits composite video
YPbPr or RGB video signals.
Easily snaps in or out of
wall plates, or patch panels.
RJ-45 jack. Passive operation.
Max distance:
Color - 2,230’ (680m),
B/W - 2,550’ (780m)
ENFORCER Active IP Baluns are designed to
extend any TCP/IP devices beyond the 300’
(100m) limit of Ethernet. The units extend the
range to ¾ mile (1.2km) for Cat5e/6 or 1.1 miles
(1.8km) for coax. Use existing coax or Cat5e/6
cable for the runs.
These units will allow installation of an IP camera
at the end of a coax run, instead of having to pull
new Cat5e/6 lines. The units do not filter out any
protocols, codes, or applications, so this ensures
compatibility with any IP camera and its software.
IPB-A1200Q
Active IP Balun over Coax
Stereo balun
MAE-P337-01Q
Component Video Balun and
Digital Audio or IR Pass Thru
over Cat5e/6 (Passive)
Active IP Balun
MAE-P317-01Q
Eases installation of dual mono or single stereo audio over Cat5e/6 cable.
Dual RCA jacks (Red/Right, White/
Left) on 6” pigtail to RJ-45 jack.
Transmits audio 1,000 ft. (300m) over Cat5e/6 UTP cable.
Gold plated connectors.
MVE-PC015Q
A/ V
Multi-Media
Transmits YPbPr or RGB video signals.
4 RCA connectors to RJ-45 jack.
Supports HDTV (480i /480p/720p/1080i) signal up to 900 ft. (300m).
Passive operation, requires no power.
Stackable or
wall mountable.
Programmable
digital audio or
IR pass-thru.
Wall-Plate Component Balun
MVE-PCW15Q
Wall-plate Component Video Balun
and Digital Audio or IR Pass-Thru
over Cat5e/6 (passive)
A/ V
Multi-Media
Transmits YPbPr or RGB video signals.
Passive operation, requires no power.
Programmable digital audio or IR pass-thru.
Single gang plate.
No exposed screws.
RCA connectors to RJ-45 jack.
Supports HDTV
(480i/480p/720p/1080i) signal up to 900 ft. (300m).
Video and digital audio
transmission over one
Cat5e/6 cable.
Component & Composite Balun
Transmits an IP camera signal or any product using TCP/IP over existing coax cable.
Distance to 5,900’ (1,800m).
5VDC adapter included.
IPB-A1100Q
MVE-PY016Q
Component & Composite Video
+ Digital and Analog Audio
with IR Pass-Thru
A/ V
Multi-Media
Active IP Balun over Cat5e/6
Stereo mini (3.5mm) plug balun
Send audio over Cat5e/6 cable from mini-stereo plug.
Stereo mini plug on 6” pigtail to RJ-45 jack.
Transmits audio 1,000 ft. (300m) over Cat5e/6 UTP cable.
Gold plated connector.
Identical to IPB-A1200Q, but uses Cat5e/6 cable
instead of coax.
Distance to 3,900’ (1,200m).
5VDC adapter included.
2 RJ-45 Jacks.
Video and stereo audio
transmission over one Cat5e/6 cable.
Two-way audio plus one video over one Cat5e/6 cable.
Passive operation, requires no power.
2 programmable outputs:
l
Digital audio or IR pass-thru.
l
Composite Video or IR pass-thru.
17
ENFORCER ®
HDMI over Cat5e/6
MVE-AH010Q
2009 Condensed Mini Catalog
HDMI Coupler
A/ V
MC-2201Q
A/ V
Multi-Media
Multi-Media
Connect HDMI
equipment using low-cost
Cat5e/6 UTP cables.
Works with full-motion video
and audio signal up to 195 ft. (60m).
HDMI over Cat5e/6 without any signal loss.
Supports 480i/480p/576i/576p/720p/1080i/1080p.
Built-in equalization and signal boost function.
Auto adjusts the equalization and amplification to eliminate feedback.
Compact size.
5VDC power supply included.
Supports DDC, EDID and hot-plug detection.
HDMI 1.3 and HDCP 1.1 compliant.
HDMI Switcher
MVS-H4101-0Q
The ENFORCER MC-2201Q is used to join two
(2) HDMI cables together. It has gold-plated
contacts for reliability and longer life.
For joining 2 HDMI cables together.
Gold plated contacts.
Compatible with all 19 pin
HDMI cables, supports HDCP.
Rotating HDMI Connector
A/ V
Multi-Media
Easily switch between any of four HDMI sources by remote control or push button.
Easily connects to different digital video sources
(DVD, A/V receiver, satellite, game console, etc.).
HDTV: resolution up to 1080p.
HDMI and HDCP pass-through.
Perfect for home theater systems.
24K Gold plated connectors.
Extends the range of HDMI compliant devices.
5VDC Power supply included.
IR remote control included.
HDMI Repeater
MVR-HH01Q
VGA & Stereo to HDMI Converter
A/ V
MC-2101Q
A/ V
Multi-Media
MVA-WH01Q
VGA input (plus stereo audio)
to HDMI signal. Allows display
from computer on HDMI monitor.
A/ V
Multi-Media
Input: VGA connector and Dual
RCA jacks (Red/Right, White/Left).
Output: HDMI Jack.
HDCP Pass-through.
5VDC power adapter (included)
Component Video & Digital Audio to HDMI
MVA-EH01Q
A/ V
Component video + digital audio
to HDMI converter
Component video input (and digital audio) to HDMI
signal output. Display any component video source
on an HDMI monitor.
Multi-Media
The ENFORCER MC-2101Q is used to change
the insertion angle for HDMI cables. The
adjustable angle allows for tight mounting against
a wall or other reduced space applications. It has
gold-plated contacts for reliability and longer life.
For tight mounts behind a monitor.
Gold plated contacts.
Compatible with all 19 pin HDMI cables, supports HDCP.
Input: 4 RCA connectors (3 for component video, and 1 for digital audio).
Output: HDMI jack.
Supports HDTV resolution up to 1080p.
5VDC power adapter (included).
HDMI Cable
MC-1101-09FQ
A/ V
Multi-Media
Black
Chrome
cable
Optical Cable
MC-5501-09FQ
A/ V
Multi-Media
Multi-Media
Extends high-definition video and digital audio
up to 115 ft. (35m).
Supports high-definition video up to 1080p.
18
9 ft. (3m) length.
Supports HDMI v1.3.
HDMI Type-A to Type-A.
28AWG OFD:7.5.
Gold-plated connector.
90° angle cable versions also available.
9 ft. (3m) single mode optical patch cable.
2 x Toslink connectors.
www.seco-larm.com
Keyless Entry Systems
Vehicle Security Systems
E-100LB Entry-Level Alarm
Entry-level alarm system packed with the most
wanted features including two slim-line 4-button RF
remote controls, relay for flashing parking lights,
and outputs for door locks and starter disable.
Two 4-button, RF remotes.
Door lock outputs (+/-).
Starter disable output.
Flashing parking lights (built-in relay).
Dual-stage shock sensor
(Patented).
128dB Multi-tone siren.
5-Function LED.
Multi-function
push button.
Multiple programming
functions.
SLI® 830 Basic Keyless Entry
SLI® 259A - Dual-stage
Two 2-button RF remotes.
Easy to install.
Flashing parking lights
with built in relay.
Two built-in, heavy-duty
door lock/unlock relays.
Auxiliary output for popping
trunk, starting car, etc.
Ideal for vehicles with cloth
or open tops, or open sunroofs.
Dual-stage protection - Chirps siren
if exterior zone violated (someone gets too close to car), triggers alarm if interior zone is violated (break-in or vandalism attempt).
SLI 840 High-End Keyless Entry/Alarm
®
The perfect alarm for any vehicle security
application. Use as a keyless entry system, or a
complete multi-featured alarm.
E-300L Full-Featured 3-Channel Alarm
Two 3-button RF remotes.
Dual-stage glass break sensor with remote microphone.
Dual-stage shock sensor.
Starter disable relay built-in.
Additional features include built-in flashing parking
light relay and outputs for door lock/unlock (+/-) and
domelight supervision.
The remote is ultra-slim
and durable, and is used
for arm and disarm,
chirp delete, zone
and sensor bypass,
as well as panic.
Two 4-button “Icon” RF remotes.
Door lock outputs (+/-).
Starter disable output.
Flashing parking lights (built-in relay).
Domelight supervision output.
Dual-stage shock sensor (Patented).
128dB Multi-tone siren
and separate horn-honk
output.
7-Function LED.
Multi-function
push button.
13 programming
functions.
Immobilizers
SLI® 761PP-ISS
Passive Proximity Immobilizer
E-640Plus Top-of-the-Line Alarm
This top-of-the-line alarm also features a patented
dual-stage electromagnetic shock sensor, starter
disable output, 17 programmable functions, and
outputs for 2-step door unlock as well as doublepulse door unlock.
Two 4-button RF remotes.
CODEBUMP™ code-hopping
technology, with CodeWash™
to delete lost or stolen remotes.
Five on-board relays
for parking lights, door
locks, 2nd channel, and
domelight supervision.
Extended range
capability.
CBA® 33 Self-contained Vehicle Alarm
Two 2-button RF remotes:
– Arm/disarm up to 200 feet (60 meters).
– Panic protection. Silent arm/disarm.
– Defective zone & shock sensor bypass via remote.
Built-in dual-stage shock sensor (patented).
5-function LED shows armed, disarmed, valet,
learn mode, and RF reception.
Instant triggering.
Emergency disarm/valet.
Current sensing protection.
Backup battery capability.
Vehicle Accessories
The Passive Proximity Immobilizer eliminates the
hassle of remembering how & when to operate a
vehicle security system. Simply placing the special
fob on the keychain allows this system to protect
the vehicle.
Two on-board relays for
disabling the starter, ignition,
or fuel pump.
Installer test mode helps
determine best position
for the sensing coil.
Plug-in status LED included.
No valet switch needed.
microwave sensor
SS-052B - Dual-stage
electromagnetic shock sensor
Dual-stage protection - Chirps siren if
car lightly tapped, triggers alarm on
break-in or vandalism attempts.
SS-051ME - Dual-stage glass-break sensor
Includes remote microphone with
3’ long cable for easy mounting
& concealment inside the car.
Dual-stage protection - Chirps siren
on light tap of window, triggers alarm on break-in.
SR-5220A /SR-5440A 2 & 4 Window roll-up modules
Compatible with most power window
systems. Works off momentary or
constant ground trigger.
System override if ignition is turned on,
doors unlocked, or any door opened.
Interfaces with all ENFORCER RF alarm systems.
SR-5220A 2 Window module.
SR-5440A 4 Window module.
SR-5201R - Power door lock interface
Allows nearly any alarm to control nearly any type power door lock/unlocks.
Includes 2 pre-wired, built-in,
heavy-duty 30A relays with
protecting diodes and
spike/noise suppressors.
License Plate Backup Cameras
Camera without
backup sensor
(wired or
wireless)
SLI® 760FP-ISS
Touchkey Immobilizer
The Touchkey Immobilizer combines high security
with the convenience of completely passive arming.
To arm, turn off the ignition. 30 seconds later, up to
two of the car’s electrical circuits are disabled.
To disarm the system, insert the Touchkey
momentarily into the Touchkey receptacle. You
now have 30 seconds to start your vehicle or the
Immobilizer will rearm.
2 Touchkeys supplied with each unit.
Handsomely crafted backlit
receptacle.
Flashing status LED.
Indicates immobilizer
armed, disarmed, code
learning mode and
valet override.
Camera with
backup sensor
(wired or
wireless)
Four versions available: Wired Camera, Wireless
Camera, Wired Camera w/Sensor, Wireless Camera
w/Sensor.
Stylish heavy-duty chrome plated frame, complements any vehicle.
Wide angle lens. Adjustable angle on the camera
(up and down).
Backup sensor version has 2 backup sensors to detect people, pets or other objects. Audio alarm included.
Wireless version frequency is 350MHz.
19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement