Manfrotto MBAG80P Specification

Manfrotto MBAG80P Specification
PROFESSIONAL VIDEO SUPPORTS
2006/07
Designing supports for video cameras means finding a graceful balance between stillness and movement freedom and control.
Our range of video tripods, heads, monopods, arms, remote controls and accessories is growing steadily and is sure to provide you
with exactly that balance. We have rock-solid tripods for heavy ENG setups and lightweight, easy-to-carry models for compact
Micro DV and Mini DV cameras, fluid heads to let you track, frame and lock on to your subject, video monopods and hydrostatic
arms to get you into and out of tight corners with quality footage, remote control units to put total command of the camera and
lens at your fingertips even when the camera and lens are out of arm’s reach, and every accessory we could think of to help you
get your job done as comfortably and professionally as possible.
KEY TO SYMBOLS
Closed
Length
2 video
Minimum
Height
Maximum
Height
Maximum Footprint
Height
Diameterr
with
extended
center column
Weight
Maximum
Load
Capacity
Head
Height
Plate
Supplied
with the
Head
Bowl
Suggested Suggested Suggested
Mid Level Spreader
Dolly
Spreader
FREEDOM
WHEN YOU
WANT IT;
CONTROL
WHEN YOU
NEED IT.
CONTENTS
Introduction
Video Heads
Video Tripods
Video Monopods
Dollies & Spreader
Fig Rig system
Video Remote Controller
Lenses Remote Controller
Bags
Carrying system
Straps
Accessories
System Guide
Index
2_3
4_21
22_32
33
34_35
36_39
40_45
46_47
48_49
50_51
52
54_55
56_57
59
video 3
VIDEO
HEADS
Our two-way “pan & tilt” heads for video cover a range
of camera equipment from Micro DV through Mini DV
up to professional ENG DV-Cams and HDV. All heads
are built to be used “open” with movements unlocked,
with a range of friction and counterbalance systems to
help regulate the weight shift of mounted equipment
during pan and tilt movements. Head features such as
fluid cartridges (which provide resistance to jarring and
shake transmitted from the operator to the camera via
the pan bar) keep camera motion as controlled and
smooth as possible.
4 video
WHY FLUID HEAD?
Manfrotto’s “pan & tilt movement” technology used for its complete range of semi-professional and professional video head is
based on a system of cartridges filled with a specific “silicone fluid”. This technology provide the smooth and constant movement
behaviour, needed to achieve “shake free” images while panning and tilting during all type of video shooting sessions.
WHAT DO WE MEAN BY LOAD CAPACITY?
This is a technical specification that sometime has been confused with the counterbalance load capacity of our heads so we feel
is important to draw a distinction. The value we claim as the “load capacity” refers to the capability of the head locking brakes to
hold the weight of the camera at any tilt or pan angles needed to lock the camcorder in position.
WHAT DO WE MEAN BY COUNTERBALANCE?
Counterbalance is achieved using a system of springs inside the head, which help to keep the camera from rolling forwards or
backwards under its own weight when the video head is tilted. This system facilitates the cameraman to achieve smoother tilt
movements. Manfrotto Video heads are supplied depending on the models with fixed or variable counterbalance spring. When is
fixed the spring is set to a specific counterbalance weight while when variable the spring can be adjusted in order to operate from
a minimum to a maximum value.
MANFROTTO DRAG SYSTEM
Manfrotto drag technology provide accurate camera control in all conditions. Depending on the models of heads it is possible to
choose between fixed and continuous adjustment. The fixed drag provides a constant friction action.
The continuous drag adjustment allows you to select the level of drag you need and to work the way you choose, rather than
having to select from predetermined levels as with stepped drag systems. This solution do not oblige you to accept compromise
on rapid and repeatable set-up but will help you to achieve always perfect framing and control.
MANFROTTO INTERCHANGEABLE SLIDING PLATES
All Manfrotto heads are equipped with sliding and interchangeable camera plates. The possibility to adjust the camera plate by
sliding it allows balancing the camera on the head and reducing to the minimum the effort while tilting it forward and backward.
The interchangeable mechanism let replace the camera with another one very fast or after having remove it from the head, to
hold it with your hands, mount it on a monopod, a crane or, a shoulder mount system by using the universal quick release mount
adapter. Plate sliding movement instead ensure that the camera load be accurately balance above the head.
VIDEO HEADS
The following chart gives suggestions on how to combine our heads with your camcorder depending the different type/format of
camcorder you use.
HEADS MODEL
DIGITAL CAMCORDER MODELS
Format
Number and
size of CCD
Camcorder
Weight
End User
DV - DV cam - DVC Pro
DIGI Beta - Betacam SP
Betacam SX
Three 1/2” or 2/3”
From 4 to 10.5kg
Professional ENG
DV - DV cam - DVC Pro
DIGI Beta - Betacam SP
Betacam SX
Three 1/2” or 2/3”
From 4 to 10.5kg
DV - DV cam - DVC Pro
DIGI Beta - Betacam SP
Betacam SX
Three 1/2” or 2/3”
Mini DV
HEADS SPECIFICATIONS
Load Capacity
in kg
Counter
Balance in kg
Tilt
Range
Type
of drag
Head to tripod
attach
526
16
-
+75° -75°
Continuous
variable
100 mm half bowl
Professional ENG
519
10
Variable
interchangeable
from 1 to 9
+90° -90°
Continuous
variable
75 mm half bowl
From 4 to 10.5kg
Professional ENG
516
10
Fixed 7.5
+90° -60°
Continuous
variable
3/8” female thread
Three 1/3”
From 2 to 8kg
Professionel
503
8
Fixed 2.5
+90° -60°
Continuous
variable
3/8” female thread
Mini DV
Three 1/3”
From 2 to 8kg
Professional
501HDV
6
Fixed 2.5
+90° -60°
Fixed plus variable
Teflon friction
3/8” female thread
Micro DV, Mini DV
DVD
One 1/4”
From 1 to 3kg
Prosumer
701RC2
4
Fixed 7.5
+90° -60°
Fixed
3/8” female thread
Micro DV, Mini DV
DVD
One 1/4”
From 1 to 2.5kg
Prosumer
700RC2
2
-
+90° -75°
Fixed
3/8” female thread
video 5
HEADS
VIDEO
HEADS
PRO FLUID VIDEO HEAD 526
15cm
3.6kg
16kg
357PLV
Ideal for PRO ENG camcorder
The new 526 Pro Video head directly addresses the heavy-duty, high-end ENG and EFP video market by offering a feature-packed fluid video head that borrows all
the combined benefits of our 500 series heads with the ability to support top weight loads of 16kg. The 526 features a replaceable and removable pan arm rosette so
if any damage occurs to the side castings, only a small part needs to be replaced; large rubber padded knobs for better grip and all the controls (tilt and pan lock, tilt
drag) are located on the left side so they can be easily found. The 526 offers our most precise fluid drag system comprised of three step settings for low, medium and
high drag levels (numbered 1, 2 and 3), plus the additional no-drag setting (number 0) for such occasions as snap-pans/tilts. Counterbalance is achieved through an
adjustable spring for camera weights between 8 and 15kg. The built-in 100mm half-ball adapts to a number of our tripods with a 100mm receiver, allowing the quick
levelling of the camera with the aid of the bright levelling bubble. The 526 comes with one pan arm and the long 357PLV plate.
FEATURES
7
1 Pan Locking Knob
2 Pan Drag Control
3 Spirit Level
4 Tilt Locking Knob
5 Tilt Drag Knob
6 Counterbalance Adjustment Knob
7 Sliding Quick Release Plate
8 Sliding Quick Release Knob
9 Sliding Plate Safety Release Button
10 Interchangeable Pan Bar Rosette
8
9
4
6
10
1
3
5
2
To correctly position a camera on a video head is
important to know its balance point (also known
as center of gravity or “CoG”). All Manfrotto video
head counterbalance systems take into consideration a camera center of gravity of 125mm.
Minimum
Maximum
Tilt
Tilt Drag
Independent Tilt Lock
Pan
Pan Drag
Independent Pan Lock
Variable Balance Control
Head Bowl
Levelling Bubble
Telescopic Pan Handle
Additional Pan Handle
Sliding Quick Release Plate
Sliding Travel of Plate
Temperature Range
6 video
+75° -70°
ø plus 3 step
Yes
360°
ø plus 3 step
Yes
Yes
100mm
Yes
1
519LV (available as an optional)
Supplied with: 2x3/8” and 2x1/4” camera screws
80mm
-20° C +60° C
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
TECHNICAL SPECIFICATION
300
275
250
225
200
175
150
125
100
75
50
4
5
6
7
8
9
10
11
12
13
14
15
16
Payload kg
HEADS
VIDEO KITS WITH 526 HEAD
KIT 526MVBKIT
166cm
105cm
8.5kg
KIT 526, 528XBK
16kg
Comprising:
526 Head, 350MVB Tripod, 165 Spreader, MBAG120P Bag
88cm
163cm
11kg
16kg
Comprising:
526 Head, 528XB Tripod, MBAG120P Bag
video 7
HEADS
PRO FLUID VIDEO HEAD 519
15cm
2.9kg
10kg
501PLV
Ideal for PRO ENG camcorder
It’s a fact, not all cameras weigh the same. Some mini DV cameras may weigh only a 1kg while professional grade DV cameras can weigh up to of 10kg. Professionals
have as many equipment options as they do shooting styles, utilizing a wide range of different cameras including MINI DV, DVCAM, HD, ENG.
When using numerous accessories, many of these setups can quickly overload video heads above the maximum recommended weight. Understanding the problem
that professional Videographers face, Manfrotto has developed the 519, a compact, yet heavy duty fluid video head capable of accommodating a counterbalance
payload from 1,5kg up to 9kg. This is a revolutionary breakthrough from Manfrotto, as the 519 will be the only video head on the market encompassing both interchangeable and adjustable counter-balance springs. Combining both features will allow Videographers to easily interchange a vast array of cameras of various weights as
well as quickly fine tune the perfect balance point of whatever camera being used, all with just one head! In addition, fluid drag is easily controlled with a large clickstop numbered knob in seven increments. Drag can be adjusted from the highest possible setting to nearly zero drag, allowing for the finest control through 360° pan
and +90° to -90° tilt.
FEATURES
7
1 Pan Locking Knob
2 Pan Drag Control
3 Spirit Level
4 Tilt Locking Knob
5 Tilt Drag Knob
6 Counterbalance Adjustment Knob
7 Sliding Quick Release Plate
8 Sliding Quick Release Knob
9 Sliding Plate Safety Release Button
10 Interchangeable Pan Bar Rosette
8
4
9
10
6
3
2
5
1
BALANCE SPRING SUPPLIED WITH HEAD
8kg
TECHNICAL SPECIFICATION
Tilt
Tilt Drag
Independent Tilt Lock
Pan
Pan Drag
Independent Pan Lock
Variable Balance Control
Head Bowl
Levelling Bubble
Telescopic Pan Handle
Additional Pan Handle
Sliding Quick Release Plate
Sliding Travel of Plate
Temperature Range
8 video
+90° -90°
Variable (7 steps)
Yes
360°
Variable (7 steps)
Yes
Yes (Operated by two interchangeable and adjustable
springs, the blue one from 1.5 to 5kg and the yellow one
from 5 to 9kg @ 125mm CG and 60° from tilt inclination)
75mm
Yes
1
519LV (available as an optional)
Supplied with: 3/8” and 1/4” camera screws
58mm
-20° C +60° C
COUNTERBALANCE GRAPH
Height of center gravity from plate mm
5kg
Blue spring - minimum
Blue spring - MAXIMUM
Yellow spring - minimum
Yellow spring - MAXIMUM
Payload kg
HEADS
VIDEO KITS WITH 519 HEAD
KIT 519, 351MVCFK
162cm
52.5cm
5.7kg
10kg
KIT 519, 525PKIT
169.3cm 45.3cm
6.4kg
10kg
Comprising:
519 Head, 351MVCF Tripod, 350SPRB Spreader
265 Feet, MBAG120P Bag
Comprising:
519 Head, 525MVB Tripod, MBAG100P Bag
KIT 519, 542ART
KIT 519MVBKIT
165.3cm 53.3cm
7.3kg
10kg
Comprising:
519 Head, 542ART Tripod, MBAG100P Bag
168.3cm 97.3cm
7.4kg
10kg
Comprising:
519 Head, 351MVB Tripod, 165MV Spreader, MBAG120P Bag
KIT 519, 532ART
Same as 519, 542ART but with 532ART Tripod
video 9
HEADS
PRO FLUID VIDEO HEAD 516
12.5cm
2kg
10kg
357PLV
Ideal for PRO ENG camcorder
Specifically designed for the latest DV camcorders used by documentary and industrial videographers.The 516 head is very compact and light but can support cameras
up to 10 kg. The 516 is a cost effective high performance head equipped with fluid cartridges that provide continuous adjustable drag control. This system gives quite a wide
range of friction control down to “zero drag” and operates on both pan and tilt axis. Other important features of the head are: separate tilt and pan locking mechanism;
a fixed counter balance spring of 7,5kg load capacity at a center of gravity of 125mm; two telescopic pan handles; a bubble level. The head has been designed so it can
be mounted on a flat base tripod with a 3/8” female thread attachment or by attaching the ART 500BALL to the head base, allowing it to fit a 100mm bowl.
FEATURES
1 Pan Lock
2 Pan Friction
3 Spirit Level
4 Tilt Locking Lever
5 Tilt Friction
6 Sliding Plate Safety Release Button
7 Sliding Quick Release Plate
2
6
10
5
4
1
7
3
Tilt
Tilt Drag
Independent Tilt Lock
Pan
Pan Drag
Independent Pan Lock
Balance control
Flat Base
Levelling Bubble
Telescopic Pan Handle
Sliding Quick Release Plate
Sliding Travel of Plate
Temperature Range
+90° -60°
Continuously adjustable from 0 to max level
Yes
360°
Continuously adjustable from 0 to max level
Yes
One fix spring for 7.5kg camera weight
3/8” female thread to mount on 75mm ball or on flat top tripod
Yes
2
Supplied with: 2x3/8” camera screws and 2x1/4” camera screws
80mm
-20° C +60° C
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
TECHNICAL SPECIFICATION
200
190
180
170
160
150
140
130
120
110
100
90
80
70
50
0.5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Payload kg
10 video
HEADS
VIDEO KITS WITH 516 HEAD
KIT 516, 350MVB
163.5cm 102.5cm
7.8kg
10kg
KIT 516, 351MVCFK
164.5cm
55cm
6.6kg
10kg
Comprising: 516 Head, 350MVB Tripod, 165MV Spreader, MBAG120P Bag
Comprising: 516 Head, 351MVCF Tripod, 350SPRB Spreader,
565 Feet, MBAG120P Bag
KIT 516, 515PKIT
KIT 516, 542ART
168.5cm 44.5cm
6.1kg
10kg
Comprising: 516 Head, 515MVB Tripod, 500BALL Half Ball, MBAG100P Bag
164.5cm 52.5cm
7kg
10kg
Comprising: 516 Head, 542ART Tripod, 500BALL Half Ball, MBAG100P Bag
KIT 516, 532ART
Same as 516, 542ART but with 532ART Tripod
video 11
HEADS
PRO FLUID VIDEO HEAD 503
15cm
1.6kg
8kg
357PLV
Ideal for PROFESSIONAL camcorder
The 503 is designed to support the latest professional digital video cameras.
Particular care has been taken to achieve the best fluid control, the smoothest possible pan and tilt movements and the most customisable performance using a
manually adjustable drag variation mechanism. Additionally, the 503 is equipped with a built-in balance spring (set for an ideal load of approx. 2.5kg) to maintain
camera positioning during tilt movements. The 503 head has the best price/performance ratio of any fluid head on the market today. Designed for payloads up to
an ample 8kg, its light but positive fluid movement provides exceptionally smooth control, thanks also to its new fine-control drag device, which offers continuous
adjustment from nearly 0 drag to maximum. The 503 has a quick-release sliding plate with VHS pin, a single telescopic pan handle and flat base with 3/8” tripod socket.
FEATURES
1 Pan Lock
2 Pan Friction Control
3 Spirit Level
4 Tilt Friction Control
5 Sliding Quick Release Plate
6 Sliding Plate Safety Release Button
7 Tilt Lock
5
2
6
4
1
7
3
Tilt
Tilt Drag
Independent Tilt Lock
Pan
Pan Drag
Independent Pan Lock
Balance control
Flat Base
Levelling Bubble
Telescopic Pan Handle
Additional Pan Handle
Sliding Quick Release Plate
Sliding Travel of Plate
Temperature Range
12 video
+90° -60°
Continuously adjustable from 0 to max level
Yes
360°
Continuosly adjustable from 0 to max level
Yes
One fix spring for 2.5kg camera weight
3/8” female thread to mount on 75mm flat top tripod
Yes
1
503LV (available as an optional)
Supplied with: 3/8” and 1/4” camera screws
58mm
-20° C +60° C
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
TECHNICAL SPECIFICATION
200
190
180
170
160
150
140
130
120
110
100
90
80
70
50
0.5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Payload kg
HEADS
VIDEO KITS WITH 503 HEAD
KIT 503, 745BK
148.5cm 32.5cm
4kg
KIT 503, 745MF3K
5.4kg
144cm
32.5cm
3.6kg
4.4kg
KIT 503, 755MF3K
173.5cm
59cm
4.4kg
5.4kg
Comprising:
503 Head, 745B Tripod,
MBAG80P Bag
Comprising:
503 Head, 745MF3 Tripod,
MBAG80P Bag
Comprising:
503 Head, 755MF3 Tripod,
MBAG80P Bag
KIT 503, 525PKIT
KIT 503, 351MVCFK
KIT 503, 351MVB2K
166.5cm 42.5cm
5.5kg
8kg
Comprising:
503 Head, 525MVB Tripod,
520BALL Half Ball, MBAG90P Bag
160cm
50.5cm
5.3kg
Comprising:
503 Head, 351MVCF Tripod,
350SPRB Spreader,
565 Feet, MBAG90P Bag
8kg
160.5cm 73.5cm
5.7kg
KIT 503, 755BK
173.3cm
59cm
4.4kg
5.4kg
Comprising:
503 Head, 755B Tripod,
MBAG80P Bag
8kg
Comprising:
503 Head, 351MVCF Tripod,
MBAG90P Bag
video 13
HEADS
PRO VIDEO HEAD 501HDV
11.5cm
1.6kg
6kg
501PL
Ideal for PROFESSIONAL camcorder
Inside the 501HDV is a powerful new feature that takes its inspiration from our top professional video head models – a fixed counterbalance spring (set for a typical
weight of camera + accessories of 2.5kg) that helps ensure both smoother tilt movements and greater equipment safety even when tilt locks are inadvertently
left off. The easy-to-reach on/off switch allows the counterbalance system to be disengaged or re-engaged for different filming setups. But from the outside, the
first thing that you’ll notice about the new 501HDV video head is its updated design – completely retuned for much improved ergonomics with locks and
knobs that allow a more solid grip and better fingertip control. The 501HDV inherits its separate pan and tilt locks, gradual tilt friction adjustment system, flat base
(with standard 3/8” thread), quick release camera plate and repositionable pan bar from its succesful predecessor.
FEATURES
1 Pan Lock
2 Pan Friction Control
3 Spirit Level
4 Spring loaded
counter balance (ON/OFF)
5 Tilt Friction Knob
6 Tilt Lock
7 Sliding Plate Safety
Release Button
8 Sliding Quick Release Plate
8
2
5
4
7
1
6
3
TECHNICAL SPECIFICATION
Tilt
Tilt Drag
Independent Tilt Lock
Pan
Pan Drag
Independent Pan Lock
Flat Base
Pan Handle
Additional Pan Handle
Sliding Quick Release Plate
Sliding Travel of Plate
Temperature Range
+90°-60°
1 step plus variable Teflon friction
Yes
360°
1 step plus variable Teflon friction
Yes
3/8” female thread to mount on 75mm flat top tripod
1
501HLV (available as an optional)
Supplied with: 3/8” and 1/4” camera screws
58mm
-10° C +60° C
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
200
190
180
170
160
150
140
130
120
110
100
90
80
70
50
0.5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Payload kg
14 video
HEADS
VIDEO KITS WITH 501HDV HEAD
KIT 501HDV, 745BK
148.5cm 32.5cm
3.9kg
5.5kg
KIT 501HDV, 745MF3K
144cm
32.5cm
3.5kg
4.5kg
Comprising:
501HDV Head, 745MF3 Tripod,
MBAG80P Bag
Comprising:
501HDV Head, 745B Tripod,
MBAG80P Bag
KIT 501HDV, 525PKIT KIT 501HDV, 351MVCFK
166.5cm 42.5cm
5.4kg
6kg
Comprising:
501HDV Head, 525MVB Tripod,
520BALL Half Ball, MBAG90P Bag
160cm
50.5cm
5.2kg
6kg
Comprising:
501HDV Head, 351MVCF Tripod,
350SPRB Spreader,
565 Feet, MBAG90P Bag
KIT 501HDV, 755MF3K
173.5cm
59cm
4.3kg
5.5kg
Comprising:
501HDV Head, 755MF3 Tripod,
MBAG80P Bag
KIT 501HDV, 755BK
173.3cm
59cm
4.3kg
5.5kg
Comprising:
501HDV Head, 755B Tripod,
MBAG80P Bag
KIT 501HDV, 351MVB2K
160.5cm 73.5cm
14.5kg
6kg
Comprising:
501HDV Head, 351MVCF Tripod,
MBAG90P Bag
video 15
HEADS
MINI VIDEO HEAD 701RC2
10.1cm
0.8kg
4kg
200PL-14
Ideal for Digital camcorder
Small and lightweight, this fluid video head is capable of accommodating a payload of up to 4 kg,
and is ideal for set-ups such as a fully equipped 3 CCD mini DV camcorder or a spotting scope
combined with a digital still or video camera for digiscoping purposes.
The 701RC2 is one of the most compact and lightweight two way heads found on the market and was
designed principally to support the latest digital video equipment, including Mini DV and the latest prosumer/
professional compact HI DEFINITION camcorders.
It is equipped with a fixed 1.5 kg counterbalance spring which combined with a camera plate attachment made of a touch and go/sliding plate who can shift from
+15mm to -15mm from the 0 point to optimize the position of the counterbalance spring and deliver a wide range of balancing positions. Fluid drag on the 701RC2
is fixed. The 701RC2 has a fixed length pan bar with a soft handle and separate locking mechanisms to the head to adjust it as you like, the sliding quick-release
video plate system is based on the 200PL-14 equipped with the usual VHS pin.
FEATURES
8
5
1 Tilt Locking Knob
2 Pan Locking Knob
3 Spirit Level
4 Plate Release Lever
5 Quick Release Plate
6 Sliding Top
7 Graduated Scale for Sliding Top
8 Sliding Top Knob
6
7
4
3
1
2
Tilt
Tilt Drag
Independent Tilt Lock
Pan
Pan Drag
Independent Pan Lock
Counterbalance
Flat Base
Levelling Bubble
Pan Handle
Quick Release Plate
Temperature Range
+90° -60°
1 Fixed
Yes
360°
1 Fixed
Yes
Yes
3/8” female thread to mount on 75 mm ball or flat top tripod
Yes
1
Supplied with: 1/4” camera screws
-10° C +60° C
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
TECHNICAL SPECIFICATION
300
275
250
225
200
175
150
125
100
75
50
25
0.5
1
1,5
2
2,5
3
3,5
4
Payload kg
16 video
HEADS
VIDEO KITS WITH 701RC2 HEAD
KIT 701RC2, 745BK
148.1cm 32.1cm
3.2kg
4kg
KIT 701RC2, 745MF3K
143.6cm 32.1cm
2.8kg
4kg
Comprising:
701RC2 Head, 745B Tripod, MBAG80 Bag
Comprising:
701RC2 Head, 745MF3 Tripod, MBAG80P Bag
KIT 701RC2, 755BK
KIT 701RC2, 055BK
173.1cm 58.6cm
3.6kg
4kg
Comprising:
701RC2 Head, 755B Tripod, MBAG80 Bag
191.1cm 27.1cm
3.6kg
KIT 701RC2, 755MF3K
173.1cm 58.6cm
3.6kg
4kg
Comprising:
701RC2 Head, 755MF3 Tripod, MBAG80 Bag
4kg
Comprising:
701RC2 Head, 055WNB Tripod, MBAG80 Bag
video 17
HEADS
MINI VIDEO HEAD 700RC2
9.6cm
0.52kg
2.5kg
200PL-14
Ideal for DIGITAL camcorder
A compact and lightweight 2-movement video head designed principally to support the latest digital video equipment but also suited to still photography cameras with
medium and long tele lenses.
The 700RC2 has a fixed length pan bar with soft handle and separate locking mechanisms for the 360° pan and the +90°/-75° tilt. Smooth and constant movements
on both axes are assured by a fixed system of fluid cartridges.
Equipped with quick release 200PL-14 video plate system with VHS PIN and a secondary safety catch.
Head to tripod attachment is 3/8” female.
FEATURES
4
1 Tilt Locking Knob
2 Pan Locking Knob
3 Plate Safety Release Knob
4 Quick Release Plate
3
1
2
TECHNICAL SPECIFICATION
Tilt
Tilt Drag
Independent Tilt Lock
Pan
Pan Drag
Independent Pan Lock
Flat Base
Pan Handle
Quick Release Plate
Temperature Range
18 video
+90° -75°
1 fixed
Yes
360°
1 fixed
Yes
3/8” female thread to mount on flat top tripod
1
Supplied with: 1/4” camera screws
-10° C +60° C
HEADS
VIDEO KITS WITH 700RC2 HEAD
KIT 700RC2, 756XBK
152.6cm 54.6cm
2.7kg
2.5kg
Comprising:
700RC2 Head, 756XB Tripod, MBAG70 Bag
KIT 700RC2, 756MF3K
152.6cm 54.6cm
2.3kg
2.5kg
Comprising:
700RC2 Head, 756MF3 Tripod, MBAG70 Bag
video 19
20 video
HEADS ACCESSORIES
COMPATIBLE PLATES
Range of additional plates for either fixed or sliding quick release assembly.
VIDEO CAMERA PLATE 357PLONG
VIDEO CAMERA PLATE 501PLONG
This long version of the standard plate allows perfect balance for camcorders
with unusual weight distribution caused by long tele lenses or heavy batteries.
The plate has a laser engraved scale to help identify and record optimal
position. In order to free the maximum range of possible balance positions
(140mm), the VHS location pin is able to slide along the length of the plate.
Supplied with 2x1/4” and 2x3/8” camera screws.
This long version of the standard plate allows perfect balance for camcorders
with unusual weight distribution caused by long tele lenses or heavy batteries.
The plate has a laser engraved scale to help identify the optimal positions
(110mm). In order to have the max range of balance positions, the VHS location
pin can be moved along the length of the plate.
Supplied with 2x1/4” and 2x3/8” camera fixing screws.
COMPATIBLE QUICK RELEASE ADAPTERS
Use to convert a non quick release camera platform into one of the three quick release systems used on all Manfrotto video heads or convert a variety of supports
(jib arms, booms, monopods, brackets) compatible with the same camera plate attachment.
PRO VIDEO QUICK RELEASE
ADAPTER 357
VIDEO QUICK RELEASE
ADAPTER 577
Compatible with the 357PL camera plate (supplied with the 516 and 526 Video
Heads) and the special 357PLONG accessory plate. This Quick Release
adapter gives you the freedom to remove the camera from the head and put it
on any other support. Supplied with 2x1/4” and 2x3/8” camera screw.
Sliding travel of plate: 80mm.
Compatible with the 501PL camera plated (supplied with the head 501HDV,
503 and 519 Video Heads) and the special 501PLONG accessory plate. This
Quick Release adapter gives you the freedom to remove the camera from
the head without detaching it from the plate and put it on any other support.
Supplied with 1/4” and 3/8” camera screws. Sliding travel of plate: 50mm
RECTANGULAR VIDEO QUICK RELEASE
ADAPTER 323
Compatible with the 200PL camera plated (supplied with the head 700RC2
and 701RC2 Video Heads). This Quick Release adapter gives you the freedom
to remove the camera from the head without detaching it from the plate and
put it on any other support. Supplied with 1/4” camera screw.
COMPATIBLE ADDITIONAL PAN BARS
Additional Pan Bars to be used as a second or replacement pan bar on Manfrotto Video heads.
PAN BAR 501HLV
PAN BAR 503LV
Fixed pan bar for the 501HDV video head.
Telescopic pan bar for the 503 video head.
PAN BAR 519LV
Telescopic pan bar for the 519 video head.
video 21
VIDEO
TRIPODS
Traditionally, video tripods have double leg tubes which
though thin, give the tripod more structural resistance
to twisting and torsion. This is vital when using heavy video cameras with pan and tilt heads. Without this
extra reinforcement every pan movement risks bringing
unwanted juddering and shake into your shoot. We
offer a range of double-tube tripods in strong aluminum alloy and in extra-rigid, lightweight carbon fiber
for video equipment up to ENG requirements. For the
new generation of ever-shrinking Mini DV and Micro
DV cameras which are light enough not to require an
over-performing tripod we developed the MDeVe family of hybrid photo/video tripods. These have the lighter, more compact single leg tube structure of the
photo tripod combined with the levelling half-ball of
the video support allowing perfectly horizontal pans.
22 video
WHAT IS THE TORSION RIGIDITY
Maximum torsion rigidity is the first feature all Videographers want from their video tripod.
A professional video tripod has to provide a rock solid base insensible to the mechanical stress induced by the tilt and pan movement
that makes the tripod not stable enough for a smooth in motion shooting session.
Last but not least the weight, the max and minimum working height are important factor too, which needs to be taken in serious
consideration while choosing your video tripod.
Manfrotto has been the first manufacturer in the world that has placed side by side to the traditional twin leg design video tripod,
a single leg tube concept which do not sacrifice the weight and working height of a tripod for its torsion rigidity performance.
The balance achieved with the MDEVE tripod and the traditional photographic design ones make now available the best tripod
solution for the latest professional MINI DV and DV camcorder.
VIDEO TRIPODS LEGS STRUCTURE & MATERIALS
Video tripods can be divided into two groups based on their leg types: those with single legs throughout, and those with twin
parallel legs in the top sections. Most use circular profile tubes, while the MDEVE series rapid center column and the carbon fiber
legs of the the 755MF3 and 756MF3 use a three-faceted profile which helps to eliminate all unwanted rotation and which (in the
case of carbon fiber tripods) means that the legs can be clamped into the tripod top crown rather than glued in.
VIDEO TRIPODS
In the chart we suggest how to combine our tripods with your camcorder depending the different type/format of camcorder you use.
TRIPOD MODELS
DIGITAL CAMCORDER MODELS
TRIPOD SPECIFICATIONS
Format
Number and
size of CCD
Camcorder
Weight
TWIN LEG
Number
of stage
Tripod to tripod
attachment
Material
DV-DV cam-DVC Pro-DIGI Beta
Betacam SP - Betacam SX
Three 1/2” or 2/3”
From 10 to 20 kg
542ART
2
75mm + 100mm bowl
Carbon fiber
DV-DV cam-DVC Pro-DIGI Beta
Betacam SP - Betacam SX
Three 1/2” or 2/3”
From 10 to 20 kg
532ART
2
75mm + 100mm bowl
Aluminum
Mini DV
Three 1/3”
From 7 to 15 kg
525MVB
2
75mm bowl
Aluminum
Mini DV
One 1/3”
From 7 to 15 kg
515MVB
2
100mm bowl
Aluminum
DV-DV cam-DVC Pro-DIGI Beta
Betacam SP - Betacam SX
Three 1/2” or 2/3”
From 10 to 20 kg
350MVB
1
100mm bowl
Aluminum
DV-DV cam-DVC Pro-DIGI Beta
Betacam SP - Betacam SX
Three 1/2” or 2/3”
From 10 to 20 kg
350SHMVB
1
100mm bowl
Aluminum
DV-DV cam-DVC Pro-DIGI Beta
Betacam SP - Betacam SX
Three 1/2” or 2/3”
From 10 to 20 kg
351MVB
1
75mm bowl
Aluminum
DV-DV cam-DVC Pro-DIGI Beta
Betacam SP - Betacam SX
Three 1/2” or 2/3”
From 10 to 20 kg
351MVCF
1
75mm bowl
Carbon fiber
DV-DV cam-DVC Pro-DIGI Beta
Betacam SP - Betacam SX
Three 1/2” or 2/3”
From 10 to 20 kg
351MVB2
2
75mm bowl
Aluminum
SINGLE LEG
Micro DV - Mini DV - DVD
One 1/4”
From 1 to 6 kg
117X
2
3/8” Male thread
Aluminum
DV-DV cam-DVC Pro-DIGI Beta
Betacam SP - Betacam SX
Three 1/2” or 2/3”
Over 20 kg
528XB
2
3/8” Male thread
Aluminum
Micro DV - Mini DV - DVD
One 1/4”
From 1 to 6 kg
055WNB
2
3/8” Male thread
Aluminum
Micro DV - Mini DV - DVD
One 1/4”
From 1 to 6 kg
745MF3
2
3/8” Male thread
Carbon fiber
Micro DV - Mini DV - DVD
One 1/4”
From 1 to 6 kg
755MF3
2
3/8” Male thread
Carbon fiber
Micro DV - Mini DV - DVD
One 1/4”
From 1 to 6 kg
756MF3
2
3/8” Male thread
Carbon fiber
Micro DV - Mini DV - DVD
One 1/4”
From 1 to 6 kg
745B
2
3/8” Male thread
Carbon fiber
Micro DV - Mini DV - DVD
One 1/4”
From 1 to 6 kg
755B
2
3/8” Male thread
Aluminum
Micro DV - Mini DV - DVD
One 1/4”
From 1 to 6 kg
756XB
2
3/8” Male thread
Aluminum
video 23
ART PRO
VIDEO
TRIPODS
Convenient padded handle
for rapid tripod opening:
For the A.R.T. (Advanced Release Technology - world
wide pat pending) tripod series, Manfrotto’s target has
been to break the 4 second limit - from securely closed
to fully open in under 4 seconds without a single lever,
button or knob. A challenge we’re extremely proud to
say we matched and surpassed, creating the world’s
fastest video tripod. But we would never forget that
speed without stamina is only half the equation; agility
without strength is little more than a gimmick. Try the
ART tripods in a head to head confrontation with any
other video tripods, and the difference in speed and
practicality will astound you, the performance in use
will reassure you that A.R.T. is the perfect tool for your
filming! The future? The future is your work... your art...
our A.R.T.
Button rapidly unlocks
top leg sections for
subsequent
fine-positioning
“Squid” mid level spreader locks
the spreader brace inclination for
improved tripod stability
even with a smaller footprint
Each leg can be individually set quickly and precisely.
Positioning the tripod anywhere between minimum and
maximum height can be done in four seconds.
The tripod can be opened to any height or inclination
from fully closed position in a matter of seconds
Included pull-on/off rubber feet
give firm grip on smooth floors,
double stainless steel spikes
are perfect on uneven terrain
at all leg angles
FEATURES
1 75mm bowl screw-in adapter allows the A.R.T. to hold
industry standard 100mm or 75mm half-ball video heads
2 Lever unlocks lower leg sections for fine positioning
– simply release the lever to re-lock the section
3 To open the spreader, press the ratchet pin and pull
the leg outwards to the desired click stop
4 To close, simply push the tripod leg inwards;
the telescopic spreader will retract automatically
24 video
1
2
3
4
TRIPODS
ART CARBON FIBER PRO VIDEO TRIPOD
542ART
ART ALUMINUM PRO VIDEO TRIPOD
532ART
73cm
73cm
40cm
152cm
4kg
15kg 75/100mm
Use of carbon fiber tubing makes this two-stage video tripod one of the
lightest in its class. The 542 uses our patented A.R.T. (Advanced Release
Technology) mechanism for the fastest opening, positioning and closing of
any video tripod in the world, ideal for filming under pressure. Comes with
100mm-75mm bowl adapter for compatibility with all industry-standard
half-ball video heads. Included mid level “squid” spreader offers improved
anti-torsion resistance and keeps legs locked safely in position even when
space is cramped and tripod footprint is necessarily smaller. Double stainless
steel spiked feet also come with quick-on/off rubber shoes for better grip
on smooth floors. No protruding parts, levers or knobs to catch or damage.
When closed, tripod legs interlock without additional clips, straps or hooks
to ensure compactness and prevent damage. Leg lock mechanism can be
adjusted for increased or reduced tightness.
PAT. PENDING
40cm
152cm
4.4kg
15kg 75/100mm
Exactly the same as the 542ART but with aluminum leg tubes.
PAT. PENDING
video 25
TRIPODS
525MVB
515MVB
LIGHTWEIGHT VIDEO TRIPOD 515MVB
72cm
32cm
156cm
3.5kg
15kg
100mm
530SPRB-531SPR
114MV-181B
A two stage, lightweight, high tensile aluminum tripod that is extremely rigid and stable. The 515MV has a die-cast aluminum crown with a built-in 100mm interface
bowl, adjustable leg clamp levers for reliability and safety in the field and a floor-level spreader which aids tripod leg angle setting adjustment. Lowest leg section has
twin spiked metal feet. The tripod can also be equipped with spiked feet shoes, different types of dollies and two models of mid level spreader.
LIGHTWEIGHT VIDEO TRIPOD 525MVB
72cm
32cm
156cm
3.5kg
15kg
75mm
530SPRB-531SPR
114MV-181B
A two stage, lightweight, high tensile aluminum tripod that is extremely rigid and stable. The 525MVB has a die-cast aluminum crown with a built-in 75mm interface
bowl, adjustable leg clamp levers for reliability and safety in the field and a floor-level spreader which aids tripod leg angle setting adjustment. Lowest leg section has
twin spiked metal feet. The tripod can also be equipped with spiked feet shoes, different types of dollies and two models of mid level spreader.
26 video
TRIPODS
350MVB
350SHMVB
VIDEO PRO TRIPOD 350MVB
95cm
90cm
151cm
4.9kg
20kg
100mm
350SPRB-530SPRB
165MV
114MV-181B
Tandem aluminum legs combine with a 100mm half bowl attachment. Features include high tensile tubular aluminum legs with one step leg angle positioning system
(21°). Legs can be adjusted within a 180° arc to other angle by using a mid level spreader 531SPRB and 530SPRB combined with a set of spike foot shoes 565 in case
of unlevelled ground or by using a floor spreader code 165MV. Legs can be locked to any height by a quick lever leg locks and stainless steel fittings. Twin spiked feet
are standard.
SHORT VIDEO PRO TRIPOD 350SHMVB
52cm
49cm
68cm
4.2kg
20kg
100mm
350SPRB-530SPRB
165MV
114MV-181B
Short version of 350MVB
video 27
TRIPODS
351MVB
351MVB2
351MVCF
LIGHTWEIGHT VIDEO TRIPOD 351MVB
93cm
84cm
151cm
3.6kg
20kg
75mm
350SPRB-530SPRB
165MV
114MV-181B
Designed with tandem upper legs and single lower legs with variable angle adjustment and twin spiked feet. Tripod is supplied with a 75mm half bowl attachment.
Tripod top spider has a two steps (18° -28°) leg angle positioning system. Legs can be adjusted within a 180° arc to other angle by using a mid level spreader 531SPRB
and 530SPRB combined with a set of spike foot shoes 565 in case of unlevelled ground or by using a floor spreader code 165MV. Leg locks by a quick lever and
stainless steel fittings make this product extremly versatile and easy to use.
LIGHTWEIGHT VIDEO TRIPOD 351MVB2
70.5cm
63cm
150cm
3.5kg
13kg
75mm
350SPRB-530SPRB
165MV
114MV-181B
Equipped with a 75mm bowl combined with upper twin-leg design for greater rigidity, the 351MVB2 has a built-in shoulder spreader allowing you to adjust the legs
at two different angles. To complete the package are twin-spiked feet to accommodate any of our accessories such as our range of dollies. The result is an extremely
portable, light and affordable professional video tripod.
CARBON FIBER LIGHTWEIGHT VIDEO TRIPOD 351MVCF
70.5cm
62.5cm
147cm
3.1kg
13kg
75mm
350SPRB-531SPR
165MV
114MV-181B
The first two stage carbon fiber video tripod from Manfrotto, equipped with a 75mm half bowl, which combine together a twin leg design for the first stage and a single
leg design for the second stage of the tripod, all completed with a double spiked feet. Legs have two angles adjustment while if they have to be adjusted at any angle
of 180° the tripod needs to be equipped with a mid level spreader 350SPRB. These technical solutions offer a tripod with a unrivalled torsion rigidity with substantial
weight saving comparing his competitors. All above listed features plus the use of composite materials like aluminum, magnesium, carbon fiber and reinforced nylon
plastic has generated the most innovative support solutions for DV and MINI DV and compact ENG cameras.
28 video
TRIPODS
117B
528XB
055WNB
VIDEO TRIPOD 117B
94cm
46cm
147cm
173cm
5.7kg
18kg
114-181B
Stainless steel extension legs and extra sturdy leg locks make this the robust choice for video crews around the world. Features built-in spirit level at the shoulder and
telescopic mid level spreader. Comes complete with rubber feet and retractable metal spike.
VIDEO/MOVIE HEAVY TRIPOD 528XB
99cm
73cm
148cm
7.4kg
50kg
100mm
114
The 528XB is the ideal location tripod, with a massive 50kg load capacity. It is a sturdy single-stage tripod with a single-tube leg structure. Tubes are made of stainless
steel for strength under heavy loads, and aluminum for weight saving. The leg spread is fully adjustable, but also incorporates a 30° locked position for faster set up and
greater strength. A 100mm bowl accepts industry-standard half-ball video heads and allows you to level the head quickly for accurate panoramic shots. The included
claw ball allows you to use it with heads not equipped with a half ball. The 528XB includes a versatile mid-level spreader, which has telescopic “ratchet” braces that
click into place in each of the preset positions for faster deployment. Each brace can be individually set, allowing each tripod leg to be separately positioned.
VIDEO TRIPOD 055WNB
64cm
8cm
138cm
181cm
2.8kg
7kg
165
127-127VS
Lightweight sturdy and portable the 055WNB is one of the Manfrotto easiest tripod to operate. Four position legs spread, long center column for extra adjustment,
three legs warmers, quick flip lever locks and retractable rubber feet with steel spikes are all incorporated into the tripod. Ideal for DV and MINI DV camcorders.
video 29
MDEVE
TRIPODS
Center column with built-in 50mm
half ball locked using the rotating
grip located at the bottom of the
center column.
Tilt range: +15°/-15°
Quick action
lever leg lock system
(45° run)
The much-heralded arrival of the digital era has brought
with it a drastic reduction in terms of weight and size
of video camera equipment, matched by enormous
advances in the picture quality achievable with the most
minuscule of systems. Naturally enough, those working
in the video sector are increasingly demanding camera
supports that are tailored to these small new cameras
but that make no compromises in key areas such as
rigidity which could jeopardize the fluidity and
smoothness of camera movements. It is out of these
demands that Manfrotto’s MDeVe series was born
Aimed at the DV, Mini DV and Micro DV markets, this
family of tripods provides high performance in an
extremely compact and lightweight structure. The
series is made up of five tripods; three are entirely
in aluminum and two have carbon fiber leg sections
with magnesium castings. All five are two-stage tripods
and are supplied with quick release leg locking levers,
asymmetric leg angle presets and, most significantly,
our patentpending, World First rapid center column
with built-in levelling half ball. The fact that the 50mm
diameter ball with bubble spirit level is attached not to
the tripod top spider but to the top of the center column
allows you to level the top plate (and consequently the
head and camera) and even adjust the camera height
without needing to make micro adjustments to the tripod
legs, representing a massive time saving and giving you
considerable added convenience. Manfrotto MDeVe
tripods - avant-garde digital video camera support.
Rubber feet
Model shown: 755B
FEATURES
1 Tripod to head connection via a disc with 3/8” male thread,
built-in spirit level and three grub screws for secure
locking mountings.
2 Mounted on a built-in 50mm half bowl levelling system
(on 745B and 745MF3 tripods).
3 Single tube leg profile made of round-section aluminum
or carbon fiber.
4 Four different leg angle settings.
30 video
1
2
4
3
TRIPODS
755MF3
756MF3
745MF3
MDEVE MAGFIBER VIDEO TRIPOD 756MF3
59.5cm
54.5cm
119cm
138.5cm
1.8kg
4kg
127/127VS
165
The 756MF3 is the most innovative tripod of the MDEVE series due to the combination of low weight (Carbon Fiber for the legs/Magnesium die casting) and high load
capacity materials used for its construction. Its unique, patent-pending aluminum center column construction and precision-machined red anodized aluminum includes
a built 50mm leveling ball system locked by a detachable rotating grip built at the bottom of the center column, which allows the camera operator to level the camera
and even adjust its height without needing to make micro adjustments to each individual tripod leg. The castings of the 756MF3 are constructed of Magnesium to
reduce the weight. The crown design also allows the center column to be horizontally mounted.
MDEVE MAGFIBER VIDEO TRIPOD 755MF3
67.5cm
62.5cm
139cm
160.5cm
2.1kg
7kg
127/127VS
165
127/127VS
165
Same as 756MF3 but with a higher load capacity.
MDEVE MAGFIBER VIDEO TRIPOD 745MF3
63cm
22cm
133.5cm
2kg
6kg
Two stage tripod made made using locking collars in magnesium and legs tubes in carbon fiber to provide better torsion rigidity and less weight during transportation.
Compatible accessories:
LEVELLING CENTER COLUMN ANGLE BRACKET 553
Working with the center column in the horizontal position on Manfrotto tripod models MDEVE
tripod family has always caused a slight difficulty, in that the head remains at 90° to the ground
making it more difficult to position the camera correctly for shooting. Now this simple but had
the most stable platform possible for filming, and that we could use ever-lighter materials, from
aluminum to carbon fiber, to keep equipment weight to the bare minimum.
Single tube leg profile madeof round-section aluminum or carbon fiber.
video 31
TRIPODS
755B
745B
756XB
MDEVE ALUMINUM VIDEO TRIPOD 745B
63cm
22cm
133.5cm
2.4kg
7kg
127/127VS
165
Two stage aluminum tripod specifically geared towards the “on-the-go” Videographers looking for a simple, straightforward, and affordable tripod without sacrificing
the key virtue of stability. With a maximum load capacity of 6kg, the new Manfrotto 745B video tripod is designed to handle payloads commonly associated with Mini
DV or DVCAM. An integrated 50mm leveling ball allows for quick set up with ±15° of leveling capability.
The 745B is ideal for travel, quickly folding up to a compact 63cm and weighing only 2,4kg. For applications that demand full extension, the 745B has a maximum
working height of 138cm and for any situation where the shot is low, the 745B can provide support as low as 22cm with all three legs opened to a full 90°.
MDEVE ALUMINUM VIDEO TRIPOD 755B
67.5cm
48.5cm
148cm
163cm
2.8kg
7kg
127/127VS
165
Designed for the professional videographers, this is an extremely versatile tripod, ideal for MINI DV camcorders. It is entirely made from aluminum, and has a removable
center column with built-in 50 mm leveling ball and bubble spirit level that can easily be re-fitted as a lateral arm. Not only does this allow the camera to be offset from
the leg position, it is also the simplest possible way to shoot a subject from directly overhead.
MDEVE ALUMINUM VIDEO TRIPOD 756XB
55.7cm
40.5cm 120.5cm
145cm
2kg
4kg
127/127VS
Professionals will love this extremely compact and light aluminum video tripod.
The tripod has an easily removed center column provided with a 50mm leveling ball and spirit level. Perfectly supports most MINI DV camcorders.
32 video
165
MONOPODS
560B
557B
558B
559B
The monopod is an important part of
every videographer’s support equipment.
Besides the tripod, the monopod is the
best way to hold a camcorder in situations
where space is limited, the quantity and
weight of the equipment carried on
location needs to be kept to a minimum,
or set-up speed is needed.
FLUID VIDEO MONOPOD 560B
62cm
167cm
0.86kg
2kg
200PL-14
The 560B Fluid Monopod for lightweight MiniDV and HDV cameras is another world-first product from Manfrotto designed to help videographers get superior images.
We’ve incorporated a fluid cartridge into the base of the monopod for incredibly smooth, jump-free panning actions. The three pivoting, retractable feet ensure a firm
footing while the quick release tilt top with angle lock knob lets you frame more creatively. All of this in a compact support ideal for use in tight spaces or environments
where a tripod may not be allowed, such as sports stadiums, conferences and museums.
VIDEO MONOPOD 557B
67cm
164cm
1kg
12kg
357PLV
Solid and stable three-section professional monopod featuring sure rubber grip, suction cup foot, quick-action leg locks, wrist strap and 357 sliding camera plate
adapter to adjust the camera’s center of balance. Ideal for ENG style camcorders.
VIDEO MONOPOD 558B
65cm
159cm
1kg
8kg
501PL
Light and compact three-section professional monopod featuring sure rubber grip, suction cup foot, quick-action leg locks, wrist strap and 577 sliding camera plate
adapter to adjust the camera’s center of balance. Ideal for DVCAM and MINI DV camcorders.
VIDEO MONOPOD 559B
55cm
161cm
0.6kg
4.5kg
200PL-14
Four section video monopod featuring, quick action leg locks, rubber grip, wrist strap, suction cup foot and touch and go 323 camera plate adapter. Ideal to support
small and very compact MINI DV camcorders.
video 33
ACCESSORIES
DOLLIES
AND SPREADERS
Manfrotto dollies and spreaders maintain a tripod at a
secure spread. Dollies provide instant manoeuvrability
around the studio or on location and all have fast action
foot controlled braking systems.
FOLDING AUTODOLLY 181B
4.5kg
127cm
Single lever braking system controls all three 80mm wheels. Includes 3/8”
attachment which allows you to fix a head for low angle shooting.
It folds legs for transporting and storage.
Designed for Manfrotto’s 117B, 350MVB, 350SHMVB, 351MVB, 351MVB2,
351MVCF, 515MVB, 525MVB, 532ART, 542ART.
VIDEO DOLLY 114
8kg
112cm
Heavy duty, super sturdy dollies are designed for use with large still and video
tripods. They feature large 127mm individually braked wheels with cable guards.
Folds for transporting.
Designed for Manfrotto’s 117B.
VIDEO DOLLY 127
PORTABLE DOLLY 114MV
6.2kg
Same as 114 Dolly with ability to accept spiked tip tripods.
Designed for Manfrotto’s 351MVB, 351MVB2, 351MVCF.
BASIC DOLLY 127VS
3.4kg
2.4kg
78to114cm
110cm
Designed for light and medium weight tripods. The 76mm wheels have a
sure-lock feature that raises the wheels free of the ground so that the dolly
rests on separate feet.
Designed for Manfrotto’s 055WNB, 745B, 745MF3, 755B, 755MF, 756XB,
756MF3.
34 video
112cm
Everything that the 127 has with the addition of variable spread to the legs.
Suitable for standard and spiked feet.
Designed for Manfrotto’s 055WNB, 745B, 745MF3, 755B, 755MF, 756XB,
756MF3.
SPREADERS
TRIPOD SPREADER FOR
SPIKED FEET 165MV
TRIPOD SPREADER 165
0.6kg
0.6kg
80 to130cm
80 to130cm
Universal tripod spreader with variable diameter width controls from 80mm to
130mm. It accepts spiked tip tripod.
Designed for Manfrotto’s 350MVB, 350SHMVB, 351MVB, 351MVCF.
Universal tripod spreaser with variable diameter width controls from 80cm to
130cm. Designed for Manfrotto’s 055WNB, 745B, 745MF3, 755B, 755MF,
756XB, 756MF3.
LOW ANGLE STABILISER 165ST
MID LEVER SPREADER 350SPRB
Designed to increase stability only for “floor-level” working positions. Quickly
fitted between the 165/165MV spreader and the head locking system, it gives
total rigidity with minimal torque movement even on fast pans. Designed for
Manfrotto’s 515MVB and 525MVB Tripods.
Designed to fit the mid level leg joint casting of 350MVB, 350SHMVB,
351MVB, 351MVB2, 351MVCF tripods to provide additional rigidity and
structural support.
MID LEVER SPREADER 531SPRB
SQUID MID LEVER SPREADER 530SPRB
Designed to fit the mid level leg joint casting of the 515MVB and 525MVB
tripods to provide additional rigidity and structural support.
The spreader braces are telescopic.
Built to fit the mid level leg joint casting to provide additional rigidity and
structural support, this innovative spreader is called the “SQUID” because of its
peculiar design. Unlike most spreaders, it lets you fine tune the spreader brace
angle to perfectly suit your working position. In combination with this continuous
angle adjustment, you can use the quick click-stop arm length presets for
rapid, precise operation. Technology used on this product is pat-pending.
video 35
FIG RIG
SYSTEM
The Fig Rig is more than just a steady support. It is a frame
on which to build your system. Your camera has only
one hot-shoe for accessories, limiting you to one light or
one monitor. With the Fig Rig, you can mount any number
of accessories that are necessary for today’s cameras.
Customize the Fig Rig to your liking. Manfrotto provides
the canvas to allow you to create your masterpiece.
Supplied with 4 cable clips
to keep all your wires wrapped
cleanly around the rig and
out of your shot
Hand Pads for a comfortable
and secure grip even in the
most extreme environments
FEATURES
1 SLIDING QUICK RELEASE PLATE
Supplied with a 501PL sliding QR plate allowing you
to position and balance your camera. The plate system
can be switched out with a variety of Manfrotto plate
assemblies to best match your camera.
2 CROSSBAR
Each side of the camera bar is threaded with one 1/4”,
3/8” and 5/8” hole for additional accessory mounting.
3 RUBBER BASE PADDING
A non-slip rubber pad provides stability when using
the Fig Rig on a flat surface such as a table, floor or railing.
36 video
1
2
3
FIG RIG SYSTEM
If, like world-class film director Mike Figgis, you’re daydreaming of a DV camera support that offers the shake-free stability of a
tripod with the framing flexibility of hand-held, at a price that has steady-cams quivering in fear... look no further than the Fig Rig.
“I needed to design a piece of equipment that could be used with the new generation of DV cameras. Something that could support
the camera and eradicate the instability that is synonymous with small camera use. And Manfrotto seemed to be the ideal company
to take it to. They have a world wide profile and a keenly competitive ambition to be at the forefront of the new generation of film
technique and innovation.”
video 37
FIG RIG SYSTEM
FIG RIG 595B
After years of using the Fig Rig on his award-winning films, Mike Figgis
brought his idea to Manfrotto. An idea that is non-traditional in design,
but purely simple and effective. The only modular system in the world
to smoothly support the DV camera and act as a frame to mount all the
accessories – including zoom controllers, mics, mixers, lights, monitors, arms...
A circular frame with a crossbar to mount most mini DV cameras, the Fig
Rig becomes part of the body to produce smooth, steady travelling shots.
It is this very fact which is the secret to the Fig Rig. As the operator walks,
his/her muscles and tendons absorb all the shocks, transferring only fluid
movements to the camera. As there are no straps or harnesses attached to
the Fig Rig, quick and wide movements can be made within the same shot
– from ground-level to overhead, in one smooth movement. The camera,
accessories and operator become one, allowing you to film scenes quickly
and unobtrusively. With the Fig Rig your creativity is virtually limitless.
COMPATIBLE VIDEO REMOTE CONTROLS
With Manfrotto’s 521 series remote controls you can control zoom and focus (for Sony and Canon). With the Fig Rig you have complete control of your camera without
ever removing your hands from the Rig.
POWER ON/OFF
FOCUS IN
REC/STOP
FOCUS OUT
WHEEL ZOOM
REC/STOP
WHEEL ZOOM
BASIC REMOTE CONTROL
FOR SONY & CANON 521
BASIC REMOTE CONTROL
FOR PANASONIC 521P
Built onto a small clamp that suits a wide range of applications, the 521 uses
the LANC protocol adopted by Sony and Canon Mini DV, and Hi8 cameras.
Controls Power On/Standby, Record/Stop function, zoom in and out and
focus in and out. Zoom wheel direction can be reversed. Supplied with 522SCA
connector coiled cord cable measuring 25cm (extendable to 50cm) long.
Built onto a small clamp that suits a wide range of applications, the 521P
is designed to work with Panasonic cameras AG-DVC-30, AG-DVC80,
AG-DVX100A, AG-DVX100B and AG-HVX200 and controls Record/Stop and
zoom in/out functions of the camera. Supplied with 522SCA connector cable
measuring 25cm (extendable to 50cm) long.
POWER ON/OFF
ZOOM SPEED BUTTON
REC/STOP
PUSH AUTO FOCUS
WHEEL ZOOM/WHEEL FOCUS
FOCUS IN/OUT
BASIC PRO REMOTE CONTROL
FOR SONY & CANON 521PRO
REMOTE CONTROL SPLITTER BOX
521SB
The 521PRO is the top opf the range for LANC enabled cameras. Key features
include the ability to use the zoom wheel for either focus (in/out) or zoom
(in/out) and an added push-button auto focus feature.
The 521SB allows you to plug in two 521 series remotes to control the camera
with both hands. For example, plug two 521PRO remotes into the 521SB and
use the zoom wheel of one 521PRO to control zoom and the other to control
focus. The 521SB is threaded with a 3/8” and 1/4” socket and supplied with
a thumbscrew to mount directly to the Fig Rig crossbar.
38 video
FIG RIG SYSTEM
COMPATIBLE MICROPHONE HOLDERS
MICROPHONE CLIP MICC1
Standard type microphone clip.
MICROPHONE SPRING CLIP UNIVERSAL SHOCK MOUNT
MICC2
MICROPHONE HOLDER MICC4
Universal type microphone clip.
Grabs microphones from diameter 20mm to 35mm.
Rubber dampening system to absorb vibrations.
Swiveling yoke has 3/8” threaded hole.
On-camera lights and monitors: position your light
or monitor anywhere around your camera, freeing
you up to take it off your hot-shoe.
Microphones: mount your shotgun mic anywhere
around the camera.
Hang it up: hang the Fig Rig on a light stand between
shots. Product shown: 039 Hook and 035C Super
Clamp mounted on light stand.
Low-angle stability: quickly mount the Fig Rig
to any 5/8” stud for either temporary storage of
stable low-angle shots.
Product shown: 003 Backlite stand, 014-38 Adapter
and 595CLA Clamp.
COMPATIBLE CLAMPS
FIG RIG CLAMP 595CLA
Clamp specifically designed for the Fig Rig. Supplied
with 1/4” and 3/8” screws, and female 1/4”-3/8”
adapter.
Mount to a tripod: need to go from hand held to a
tripod/monopod? No problem, simply mount the
entire Fig Rig quickly to a tripod/monopod.
Product shown: Video head and 595CLA Clamp.
COMPATIBLE QUICK RELEASE ADAPTERS
PRO VIDEO QUICK
RELEASE ADAPTER 357
RECTANGULAR VIDEO QUICK
RELEASE ADAPTER 323
Extra long plate system for larger cameras.
Supplied with 2x1/4” and 2x3/8” camera screws.
Sliding travel of plate: 80mm.
Quick ‘touch-and-go’ plate system for smaller cameras.
Supplied with 1/4” camera screw.
video 39
VIDEO
REMOTE
CONTROL
¤
¤
¤
***
¤
***
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
***
¤
***
***
¤
***
***
¤
***
***
¤
***
¤
¤
¤
¤
¤
¤
*** no PAF - no Push Auto Focus function
40 video
522P
¤
¤
Remote Control
521PRO
¤
Camcorder
PANASONIC
AG-DVC 30
AG-DVC 80
AG-DVX 100A
AG-DVX 100B
AG-DVX 100BE
AG-DVX 100E
AG-HVX 200
521P
SONY
DCR-PC330
DCR-TRV950
DCR-VX1000
DCR-VX2000
DCR-VX2100
DSR-200
DSR-250
DSR-PD150
DSR-PD170
DSR-PDX10
HVR-A1U
HVR-FX1
HVR-Z1U
CANON
GL-1
GL-2
XL1
XL1s
XL2
XL-H1
XM-1
XM-2
521
Camcorder
523PRO
Remote Control
Our video camera remote control units put the essential commands of market-leading video cameras from
Sony, Canon and Panasonic at your fingertips. Appropriate for use with a video tripod & head, monopod,
Fig Rig, jib arm, crane or alternative support system.
Pan bar versions (which integrate directly with your video head) offer the advantage of allowing you to operate
both camera movement and recording/zoom functions
with the same hand without having to touch the camera
itself; helping eliminate shake and unwanted vibration
from your shooting. Clamp versions reduce the number of buttons and controls to the bare minimum, but
where you use them is limited only by your imagination. They can be attached to anything from tubes, pipes, table tops, Fig Rigs, steering wheels, handlebars,
hang-gliders or almost anything else.
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
REMOTE CONTROL PRO 523PRO
The 523PRO remote control works with both Sony and Canon LANC-enabled video cameras. The remote control features a record/stop button, a power on/
standby button, three different zoom speed control buttons (slow, medium and fast) and a push auto focus button. The zoom wheel can be used to control one
of the three preset, maximum zoom speeds or a customisable maximum speed which you can set to exactly the level you want. For all zoom speeds you can
choose between progressive zoom speed (the further you rotate the zoom wheel, the faster the zoom) or fixed zoom speed (irrespective of the rotation applied
to the wheel, zoom speed remains constant) by pressing the button once (progressive) or twice (fixed). The LED shows you which speed you have selected.
To set a “custom” zoom speed, simply use the wheel to set your speed and hold the zoom speed button until the LED flashes. The setting remains in the unit’s memory
until you decide to change it. Whether you choose a limited progressive zoom range or a single fixed speed, the features of the 523PRO mean you can easily repeat
zooms precisely in subsequent takes of the same shot. The 523PRO also allows you to set left- and right-handed operation by changing zoom wheel direction.
The push auto focus button makes it very easy to achieve in focus images when working in manual focus mode. You can also use the manual focus in and out buttons
and change the focus direction. 523PRO does not come with any parts to fit to the head, but instead utilizes the pan bar clamp that comes with all Manfrotto heads.
The 523PRO is the only
semi-professional video remote system
available on the market today that uses a
professional-type “wheel” zoom for finer
adjustment and smoother progressions
FEATURES
1 Zoom wheel direction and focus direction
can be inverted (left – right or right – left)
2 Telescopic pan bar allows you to choose
the most comfortable working position
3 Incorporation of the remote controller with
the video head pan bar ensures sturdy
attachment and eliminates mechanical problems
4 Only system with jack connector rather than built-in
cable means the camera cable can be easily substituted
5 Waterproof cover supplied with a crystal clear vinyl
panel to allow to view the remote control button
during the shooting session. The cover slips quickly
over the remote pan bar to protect it from rain
or sudden showers.
2
1
3
5
4
COMMANDS
POWER ON/STANDBY
PUSH AUTO FOCUS
ZOOM SET SPEED 1
F=fixed speed zoom
P=progressive speed zoom
ZOOM PRESET SPEED 2
F=fixed speed zoom
P=progressive speed zoom
ZOOM PRESET SPEED 3
F=fixed speed zoom
P=progressive speed zoom
REC/STOP
FOCUS IN
FOCUS OUT
WHEEL ZOOM
video 41
VIDEO REMOTE CONTROL
FOR SONY/CANON
VIDEO REMOTE CONTROL
FOR SONY/CANON
BASIC REMOTE CONTROL 521
Built onto a small clamp that suits a wide range of applications, the 521 uses the LANC protocol adopted by Sony and Canon Mini DV, and Hi8 cameras. Controls Power
On/Standby, Record/Stop function, zoom in and out and focus in and out. Zoom wheel direction can be reversed. Supplied with 522SCA connector coiled cord cable
measuring 25cm (extendable to 50cm) long. Rain cover available as accessory (523RC).
BASIC PRO REMOTE CONTROL 521PRO
Built onto a small clamp that suits a wide range of applications, the 521PRO is the top of the range of this compact remote control. It uses the LANC protocol adopted
by Sony and Canon Mini DV, and Hi8 cameras. Supplied with 522SCA connector coiled cord cable measuring 25cm (extendable to 50cm). Rain cover available as
accessory (523RC).
CLAMP RANGE
Round tube/pipe/bar: 12mm
to 35mm diameter
CLAMP RANGE
Square tube of flat surfaces:
5mm – 30mm height
CLAMP RANGE
Rectangular tube of flat surfaces:
5mm – 30mm height
Only on 521PRO: invertible focus direction
FEATURES
1 WHEEL ZOOM: Professional “wheel” zoom for finer
adjustments and smoother progressions
INVERTIBLE ZOOM DIRECTION:
Zoom in/out direction can be inverted
(left to right, or right to left) be easily substituted
2 JACK CONNECTOR: 2.5mm jack connector instead
of built-in cable means you can easily change the length
of the camera cable for different set-up requirements
COMMANDS 521
COMMANDS 521PRO
POWER ON/OFF
FOCUS IN
REC/STOP
FOCUS OUT
WHEEL ZOOM
POWER ON/OFF
ZOOM SPEED BUTTON
REC/STOP
PUSH AUTO FOCUS
WHEEL ZOOM
FOCUS IN/OUT
42 video
1
2
VIDEO REMOTE CONTROL
FOR SONY/CANON
REMOTE PAN BAR ADAPTER
It seemed too much of a shame to keep this to ourselves, so we’ve also made
available a pan bar adapter kit that connects the Manfrotto remote control
to video heads from other manufactures:
SUPPLEMENTARY ADAPTER CODE
522PB 12
522PB 13
522PB 14
522PB 16
522PB 18
522PB 22
522PB 25
522PB 30
BAR DIAMETER
12mm
13mm
14mm
16mm
18mm
22mm
25mm
30mm
RAIN COVER FOR REMOTE CONTROL 523RC
Waterproof cover for Manfrotto remote control series 521 and 521PRO
supplied with a crystal clear vinyl panel to allow to view the remote control
button during the shooting session. The cover slips quickly over the remote
pan bar to protect it from rain or sudden showers.
OPTIONAL CABLES
The following cables of different length are available as accessories:
REMOTE CONTROL CABLE
STANDARD 522SCA
2.5mm male/male jack coiled cord cable measuring 25cm extendable to 50cm
supplied as standard with all the units.
REMOTE CONTROL CABLE
EXTENSION 522EXTC
2.5mm male/female jack and plug, straight cable, measuring 90cm in length
can be fitted to all units.
REMOTE CONTROL CABLE
SUPER EXTENSION 522EXTC30
2.5mm male/female jack and plug, straight cable, measuring 30 meters in length
can be fitted to all units.
video 43
VIDEO REMOTE CONTROL
FOR PANASONIC
REMOTE CONTROL 522P
The 522P is a dual circuit, progressive zoom remote control unit for the Panasonic AG-DVC-30, AG-DVC80, AG-DVX100A, AG-DVX100B and AG-HVX200. Built into a
video head pan bar suitable for Manfrotto models 501HDV, 503, 516, 519 and 526. The dual circuit allows you to choose between a zero power consumption “analog”
mode for basic functions (record/stop and progressive min-max zoom via a professional zoom wheel) and a 3 AA (1.5 volt) battery-powered, advanced, customisable
“digital” mode. The digital mode gives you the record/stop function, and the zoom wheel can be used to control one of three preset maximum zoom speeds or a
customisable maximum speed which you can set to exactly the level you want. The “custom” zoom speed setting remains in the unit’s memory even when batteries
run down, until you decide to change it. In addition, for all options except the slowest preset speed, you can choose between progressive zoom speed (the further you
rotate the zoom wheel, the faster the zoom) and fixed zoom speed (irrespective of the rotation applied to the wheel, zoom speed remains constant) by pressing the button once (progressive) or twice (fixed). An LED shows you which speed you have selected. The 522P also allows you to set left- or right handed operation by changing
zoom wheel direction. 522P does not come with any parts to fit to the head, but instead utilizes the pan bar clamp that comes with all Manfrotto heads.
Only control unit on the market that not
only has the standard basic “Analog” mode,
but also a full-featured “Digital” mode
with 3 zoom speed presets,
a fourth “personal” speed setting,
and progressive or fixed speed zooming
FEATURES
1 522P is mounted on a telescopic video head pan bar for sturdy
attachment, comfortable positioning and fingertip control
2 Incorporation of the remote controller with the video
head pan bar ensures sturdy attachment and eliminates
mechanical problems
3 Professional zoom wheel with excellent build quality gives
finer control over progressive zoom speeds
Zoom wheel direction can be inverted (left – right or right – left)
4 Battery compartment located in handle of pan bar.
Batteries not included
5 Only system with jack connector instead of built-in cable,
so it can easily be substituted, lengthened or shortened.
COMMANDS
MINIMUM ZOOM SPEED
preset, fixed speed only
MEDIUM ZOOM SPEED
preset, fixed or progressive speed
MAXIMUM ZOOM SPEED
preset, fixed speed only
DIGITAL MODE
Switch to digital mode for access
to advanced zoom functions
REC/STOP
ANALOG MODE
Switch back to Analog mode to save battery life
CUSTOM
Customisable zoom speed,
fixed or progressive speed
WHEEL ZOOM
44 video
1
4
2
4
3
5
BASIC REMOTE CONTROL FOR PANASONIC 521P
Built onto a small clamp that suits a wide range of applications, the 521P is designed to work with Panasonic cameras AG-DVC-30, AG-DVC80, AG-DVX100A,
AG-DVX100B and AG-HVX200 and controls Record/Stop and zoom in/out functions of the camera. Supplied with 522SCA connector cable measuring 25cm
(extendable to 50cm) long.
CLAMP RANGE
Round tube/pipe/bar: 12mm
to 35mm diameter
CLAMP RANGE
Square tube of flat surfaces:
5mm – 30mm height
CLAMP RANGE
Rectangular tube of flat surfaces:
5mm – 30mm height
FEATURES
1 WHEEL ZOOM: Professional “wheel” zoom for finer
adjustments and smoother progressions
2 JACK CONNECTOR: 2.5 mm jack connector instead
of built-in cable means you can easily change the length
of the camera cable for different set-up requirements
1
2
COMMANDS 521P
REC/STOP
WHEEL ZOOM
FOR PANASONIC
REMOTE PAN BAR ADAPTER
OPTIONAL CABLES
It seemed too much of a shame to keep this to ourselves, so we’ve also made
available a pan bar adapter kit that connects the Manfrotto remote control
to video heads from other manufactures:
The following cables of different length are available as accessories:
SUPPLEMENTARY
ADAPTER CODE
522PB 12P
522PB 13P
522PB 14P
522PB 16P
522PB 18P
522PB 22P
BAR DIAMETER
12mm
13mm
14mm
16mm
18mm
22mm
REMOTE CONTROL CABLE
STANDARD 522SCA
2.5mm male/male jack coiled cord cable measuring 25cm extendable to 50cm
supplied as standard with all the units.
REMOTE CONTROL CABLE
EXTENSION 522EXTC
2.5mm male/female jack and plug, straight cable, measuring 90cm in length
can be fitted to all units.
RAIN COVER FOR REMOTE CONTROL 523RC
Waterproof cover for Manfrotto remote control 521P supplied with a
crystal clear vinyl panel to allow to view the remote control button during
the shooting session. The cover slips quickly over the remote pan bar to protect
it from rain or sudden showers.
REMOTE CONTROL CABLE
SUPER EXTENSION 522EXTC30
2.5mm male/female jack and plug, straight cable, measuring 30 meters in length
can be fitted to all units.
video 45
VIDEO REMOTE CONTROL
FOR PANASONIC
ZOOM
REMOTE CONTROL
Manfrotto is the first company to offer a single unit that will control both Fujinon and Canon
lenses. Building on the success of our Camcorder
Remote Controls and Lens-specific Controllers;
our new Lens Controls are designed to command
both the Fujinon and Canon interchangeable lenses used by professional camcorders. The Intelligent embedded system that allows the controller
to automatically recognise and communicate with
the lens you connect it to is what sets Manfrotto’s
Lens Controls head and shoulders above the rest.
In other words: more flexibility at a lower investment for you, less gear to carry around, less to go
wrong and all backed up by Manfrotto’s truly
worldwide service and support network.
BASIC INTELLIGENT ZOOM REMOTE CONTROL FOR ENG LENS 521CFi
A brand new addition to the Lens Control range; the 521CFi puts all the functions of the 524CFi in a smaller clamp control suitable for use with the 595B Fig Rig, with
jib arms and in a wide variety of other shooting setups. This allows the video operator to take full advantage of the latest compact HD camcorders with interchangeable
lenses. The 521CFi offers an easy to operate progressive zoom, record/stop and RET (return - plays back last 3 seconds of footage then stops at the last recorded
frame ready to record again). A small side-mounted dial allows you to quickly and easily limit the maximum zoom speed to avoid too-fast transitions while the zoom
direction switch (also on the side of the unit) lets you change from left-right to right-left zooming. A rain cover is available as accessory (523RC).
46 video
Professional DV cameras continue to evolve and borrow many of the features found on the very high-end ENG cameras including removable manual lenses. Manfrotto
is proud to introduce a new range of zoom remote controls dedicated to the professional ENG lens market. Using the same popular pan-handle design of the 523PRO
and 522P remotes, Manfrotto offers a zoom remote controls 524AX for Angenieux ENG lens. It comes with a built-in 90cm 8-pin cable to automatically adapt to the
8-pin connection found on most analog ENG lenses. Just like our 522P and 523PRO remotes, the 524 series is built into the pan handle which automatically adapts to
the Manfrotto 500 series pro video heads. As with all our pan-handle remotes, various diameter adapter bars are available to attach the remotes to any video head.
INTELLIGENT ZOOM REMOTE CONTROL FOR ENG LENSES 524CFi
The 524CFi is a pan bar-mounted remote control unit for Canon and Fujinon video camera lenses with intelligent circuitry and programming to differentiate between
the two. The 521CFi offers an easy to operate progressive zoom, record/stop and RET (return - plays back last 3 seconds of footage then stops at the last recorded
frame ready to record again). The red dial allows you to quickly and easily limit the maximum zoom speed to avoid too-fast transitions while the zoom direction switch
lets you change from left-right to right-left zooming.
FEATURES
1 Telescopic pan bar allows you to
choose the most comfortable working position
2 Incorporation of the remote controller with the video head pan bar
ensures sturdy attachment and eliminates mechanical problems
3 Professional-type “wheel” zoom for finer adjustment
and smoother progressions. Zoom wheel direction
can be inverted (left – right or right – left)
4 Waterproof cover supplied with a crystal clear vinyl panel
to allow to view the remote control button during the shooting
session. The cover slips quickly over the remote pan bar
to protect it from rain or sudden showers.
1
2
2
3
4
COMMANDS
Professional thumb zoom wheel that comfortably and naturally fits the hand to produce smooth zooms
Raised record start/stop button to easily locate as you’re looking through the viewfinder
RET Return Video Function that allows you to play back the last 5 seconds of recorded material with
the camera automatically cueing up the tape to the last frame so as not to break timecode
Stepless zoom control speed dial allowing you to pre-select a zoom speed and/or changing the zoom speed mid-shot
Illuminated power indicator. No batteries are required to operate the remote as all power is pulled from the camera.
ADAPTER CABLE 524ADAPT
This optional 10cm adapter cable allows you to convert the 8-pin 524FN Fujinon Remote Control cable to a 12-pin configuration found on some Fujinon ENG lenses.
video 47
ZOOM REMOTE CONTROL
ZOOM REMOTE CONTROL FOR ANGENIEUX ENG LENSES 524AX
TRIPODS BAGS AND
CARRYING SYSTEM
A tripod is a wonderful thing. Carrying one never has
been...until now. At Manfrotto, we know more than most
about how the subject, so it was in our own interests as
much as it was in yours to develop a complete range of
carrying and transportation solutions designed around
the one piece of photo or video kit that most bag
manufacturers conveniently choose to ignore... our own
beloved tripod. With our new carrying systems, we’ve
worked from the inside out to invent new contoured bag
shapes that fit your kit and offer convenient ways of
setting up and breaking down faster, a “space pad” that
lets you shoulder carry your tripod without risking bangs
and bruises, an open backpack that keeps your hands
free, your tripod protected and weight to a minimum.
Whether you want a handle or strap that doesn’t even
have to be removed from your tripod when you set up a
shoot, or whether you need a protective shell to get your
kit safely through baggage hall hell, we’re pleased to say
we’ve got the solution. With innovative technical features,
prime materials and first class construction methods, the
quality of all our bags and carrying solutions is up to the
high standards you expect from Manfrotto.
Central handle
(on models MBAG120P).
Easy-grip zip opening
Padded end protects
tripod head
Shoulder strap
FEATURES
1 End opening allows for faster “quiver”style extraction and insertion of the tripod.
2 High quality, durable ballistic nylon
3 End handle (on models MBAG120P,
MBAG100P, MAGB90P, MBAGB80).
4 Adjustable carrying handle for better balance during
transportation heavy heads mounted on the tripod
(on models MBAG120P, MBAG100P, MBAG90P).
5 Internal pocket holds video head pan bar
(on models MBAG120P, MBAG100P, MAGB90P).
48 video
1
4
2
1
5
3
TRIPOD BAGS
PADDED TRIPOD BAG 120CM MBAG120P
The largest bag in the range, the MBAG120P is padded to protect your equipment and has the following features:
• Asymmetric tapered shape allows you to store the tripod with the head attached.
Tripod legs fit comfortably in the narrower end (diameter 20cm) and extra space is allowed for the larger volume of the head at the wider end (diameter 23cm).
• Zip extends down the length of the bag, but also fully opens the top end of the bag.
• Thermoform padding holds the tripod in place in the bag and protects it, especially the head, during transport.
• Inner pocket holds accessories (such as video head pan bars).
• Innovative design and style; ballistic nylon, zips and other materials used are of top quality.
• Can be hand-carried horizontally by the side handle, vertically by the end handle (also useful for storage), or shoulder-carried using the included strap.
PADDED TRIPOD BAG 100CM MBAG100P
Same design of MBAG120P different size and without the double positioning carrying handle.
PADDED TRIPOD BAG 90CM MBAG90P
Same design of MBAG120P different size and without the double positioning carrying handle.
PADDED TRIPOD BAG 80CM MBAG80P
Basically the same as MBAG120P, but smaller, and without the side handle or inner accessory pocket. The MBAG80P is also narrower that the other padded bags.
The narrow end measures 13cm diameter, the wide end measures 15cm.
UNPADDED TRIPOD BAG 80CM MBAG80
The MBAG80 is an unpadded tripod bag.
• Slightly tapered to provide a better fit for your tripod with attached head. The wider end of the bag accommodates the head without requiring all levers to be removed.
• Zip extends down the length of the bag, but also fully opens the top end of the bag.
• Logo end cap is padded to offer protection to the tripod head, the rest of the bag is unpadded.
• Shoulder strap included (the MBAG80 doesn’t have either end or side handle).
• Innovative design and style; ballistic nylon, zips and other materials used are of top quality.
UNPADDED TRIPOD BAG 70CM MBAG70
MBAG120P MBAG120P MBAG100P
350MVB
MBAG120P
MBAG120P
350SHMVB
MBAG90P
MBAG90P
MBAG90P
515MVB
525MVB
MBAG90P
TRIPOD WITHOUT HEAD
MBAG100P
MBAG90P
MBAG100P
MBAG120P MBAG120P
MBAG100P
MBAG120P MBAG120P
MBAG100P
MBAG100P
MBAG120P
MBAG90P
MBAG100P
MBAG120P
528XB
MBAG70
MBAG100P
MBAG120P
351MVB
351MVB2
701RC2
MBAG80P
117B
351MVCF
700RC2
526
MBAG80P
519
MBAG80P
516
503
055WNB
501HDV
Tripod Model
Head Model
Same as MBAG80, but slightly smaller.
542ART
MBAG100P MBAG100P
532ART
MBAG100P MBAG100P
MBAG120P
MBAG120P
MBAG100P
MBAG120P
MBAG120P
745B
MBAG80P
MBAG80P
MBAG80
MBAG70
745MF3
MBAG80P
MBAG80P
MBAG80P
MBAG70
755B
MBAG80P
MBAG80P
MBAG80
MBAG70
755MF3
MBAG80P
MBAG80P
MBAG80
MBAG70
756XB
MBAG70P
MBAG70
756MF3
MBAG70P
MBAG70
video 49
CARRYING SYSTEM
BUCKET BACKPACK 540BB
Faster to use than a traditional back pack; more convenient than having to carry your tripod in your hand or under your arm - the bucket back pack is especially useful on
longer journeys or on wilder terrain, where you still need to know that you can release the tripod, set up and shoot in seconds. It’s designed to hold any of our tripods with
any video head attached: the head is placed in the lower “bucket” where its weight is better supported and less likely to swing off balance and hurt you, the legs extend up
your back and are firmly tied in position. For birdwatchers, aeroplane enthusiasts and other users of spotting scopes, the bucket backpack will also let you transport your
whole kit, with scope attached - as shown, the scope is cradled in the lower part of the back pack, and the tripod legs extend up your back.
HAND A LONG 458HL
Provide a more comfortable carrying system for MDEVE and 055WNB, this carrying handle, can be adjusted in length to better balance the tripod during transportation.
HAND A LONG 540HL
The hand-a-long is a padded bar that encloses a short hand-carry strap which attaches to the built-in rings at either end of the first leg section of the 542ART/532ART
pro video tripods. Because it’s compact and attaches to one leg section only, you don’t need to take it off the tripod while shooting so it’s fast and convenient in the field.
And it won’t get in the way of tripod positioning or filming. The grip is long enough to allow hand position to be moved to match center of balance of tripod/head. Can be
combined with strap 540STRAP.
50 video
CARRYING SYSTEM
SPACE PAD 540SP
Suitable for use with tripod models 542ART/532ART, the 540SP wraps quickly around the closed tripod legs, snaps securely in place and can be positioned to match the
center of balance of any tripod/head combination. The space pad offers three distinct ways of carrying the tripod – hand-hold by your side (so it stops the tripod banging
against your legs); fireman-carry on your shoulder (where the padding makes carrying the tripod a less awkward and painful task) or, in combination with strap 540STRAP,
like a shoulder bag (protecting your legs and hips from bangs and bruises).
Our special rubberised
“bubble” finish guarantees
a secure non-slip grip
on the product
The special ergonomic closure of the
540SP stays locked shut however
loose or tight you set it, while the
curved contour avoids sharp edges
and protects both pad and contents
QUICK ACTION STRAP 401N
A quick and easy accessory for carrying your tripod when walking, hiking, cycling or just getting from shoot to shoot. Use the shorter straps to fasten the padded 401N to
one of the legs of your tripod, bind the remaining legs together using the longer adjustable quick release straps, sliding the tripod over your shoulder and you’re ready to
go, with your hands free to grab those vital last minute items. The padding helps hold the tripod in place and protects your back from bruises and chaffing. The 401N even
stays attached to your tripod when shooting (all you need to do is release the longer quick release straps so you can manoeuvre and position all three legs), so you’re always
ready to capture the images you want, but also always ready to move off again to the next location.
Straps can be removed and custom-positioned
to better match the size of your tripod
The strap stays attached
to your tripod when
shooting
video 51
STRAPS
LONG STRAP 102
The 102 strap is a basic but convenient way to carry your kit. It has a spring clip that fastens quickly to the steel ring
at the shoulder of the tripod, and a closed loop that goes around the feet of the tripod and tightens to grip them
securely. Features an adapter for compatibility with all Manfrotto tripods and rubberised fabric for comfort and to avoid
the tripod slipping on your shoulder.
LONG STRAP 440STRAP
Same as 102, but made with a narrower black rubberised fabric (40mm width instead of 50mm).
SHORT STRAP 402
The 402 is a simple loop strap, with a single spring clip that attaches quickly to the steel ring at the shoulder
of your tripod. Features an adapter for compatibility with all Manfrotto tripods. Strap is in grey rubberised fabric
for comfort and to avoid the tripod slipping on your shoulder.
SHORT STRAP 441STRAP
Same as 402, but made with a narrower black rubberised fabric (40mm width instead of 50mm).
STRAP 540STRAP
Made to measure for the 542ART and 532ART pro video tripods, the 540STRAP attaches to the built-in rings
present at either end of the tripod’s top leg section to keep the load evenly balanced while carrying. The
ergonomically contoured strap has a rubber “tread” for comfort and to avoid the tripod slipping on our shoulder.
52 video
video 53
ACCESSORIES
REVERSIBLE SPIKED FEET 055SPK2
REVERSIBLE SPIKED FEET 190SPK2N
REVERSIBLE SPIKED FEET 440SPK2
REVERSIBLE SPIKED FEET 441SPK2
REVERSIBLE SPIKED FEET 449SP2
REVERSIBLE SPIKED FEET 676SP2
Reversible rubber/metal spiked feet (set of 3) supplied with a dedicated fixing
tool. The spike is made of a special hard anodized aluminum alloy extremely
resistant to corrosion.
055SPK2 for tripods: 055WNB, 745B, 745MF3, 755B
190SPK2N for tripod: 756XB
440SPK2 for tripod: 756MF3
441SPK2 for tripod: 755MF3
449SP2 one foot for monopod: 559B
676SP2 one foot for monopod: 558B
SUCTION CUP/ RETRACTABLE SPIKE FEET 055SCK2
SUCTION CUP/ RETRACTABLE SPIKE FEET 190SCK2N
SUCTION CUP/ RETRACTABLE SPIKE FEET 440SCK2
SUCTION CUP/ RETRACTABLE SPIKE FEET 441SCK2
A rubber section cup feet (set of 3) with retractable stainless steel spike.
The suction cup increases the footprint of the monopod by almost 20 times,
giving much greater stability when needed.
055SCK2 for tripods: 055WNB, 745B, 745MF3, 755B
190SCK2N for tripod: 756XB
440SCK2 for tripod: 756MF3
441SCK2 for tripod: 755MF3
SPIKE FOOT SHOES 565
RUBBER/SPIKED FOOT 677SP
Set of 3.
For tripods: 350SHMVB, 350MVB, 351MVB, 351MVB2, 351MVCF, 515MVB,
525MVB
Rubber foot for with retractable metal spike. For monopod: 557B
MONITOR HOLDER 311
MINI BALL HEAD LCD 482LCD
Designed to hold a monitor mounted on a tripod by using a standard 16mm stud.
Straps hold monitor securely in place.
6.4cm
0.12kg
2kg
The 482LCD ball head is a swivel mounting accessory than can be attached to
the bottom of LCD or TFT monitors so you can mount the monitor to the top of
the camera by using the “hot shoe” located on the top of the most camcorders.
SUPER CLAMP 035C
0.25kg
This universal clamp can be securely mounted on any tube from 13 to 45mm.
Attachment is 5/8” hexagonal socket.
54 video
ACCESSORIES
500BALL
520BALL
500BALLSH
520BALLSH
100MM HALF BALL 500BALL
Half ball for levelling video heads on Video tripods provided with 100mm bowl.
75MM HALF BALL 520BALL
HI HAT 529B
Half ball for levelling video heads on Video tripods provided with 75mm bowl.
100MM HALF BALL SHORT 500BALLSH
14.5cm
19.5cm
20.5cm
2.7kg
20kg
100mm
The 500BALLSH comes complete with a short locking handle to mount all
Manfrotto flat-base heads to the 529B Hi-Hat.
Manfrotto’s new Hi-Hat enables you to get shots from the dog’s perspective.
The 529B has adjustable leg angles to mount the camera in the tightest or
lowest of locations - and thanks to the built - in spreader you can simply
use the 529B on any even surface. The feet are rubber-padded to protect
delicate surfaces and have a hole so that the 529B can be screwed to a ladder,
apple-box or a sheet of wood. Recommended Heads:
526
519 (with 319 adapter)
516 (with 500BALLSH adapter)
503 (with 500BALLSH adapter)
501HDV (with 500BALLSH adapter)
75MM HALF BALL SHORT 520BALLSH
The 520BALLSH comes complete with a short locking handle to mount all
Manfrotto flat-base heads to any 75mm bowl tripod including the 529B Hi-Hat
(with optional adapter 319).
100MM TO 75MM ADAPTER 319
VIDEO HEAD ADAPTER BOWL 325N
Converts all Manfrotto 100mm bowl tripods into a 75mm bowl.
Adaptor kit to connect a 75 or 100mm half bowl video head to a flat base tripod.
823
819
814
MEDIUM HYDROSTATIC ARM 823
11.4cm
23.5cm
0.55kg
4kg
This is the first arm that features 5/8” and 1/4” pins to support larger and heavier items. One of the two pins is hex shaped to merry perfectly with our superclamp. With a total
length of 23.5cm, the 823 is ideal to position lighting fixtures or cameras virtually anywhere. To ensure that all three feet make contact with the ground on any terrain.
SMALL HYDROSTATIC ARM 819
11.5cm
18cm
0.18kg
2.2kg
This arm spans 18cm and can support up to 2.2kg. The 819 is the ideal companion for attaching a video monitor to a camera or using as a flag support. Like the 814,
the pivoting pins are 1⁄4-20” and 3/8” threaded with one side offering a platform to provide a larger footprint for the equipment being supported by the arm.
MINI HYDROSTATIC ARM 814
9cm
13cm
0.16kg
3.5kg
The shortest arm at 13cm is also the most powerful. The pivoting pin is threaded with 1⁄4-20” and 3/8” studs so it can be attached to the top of a video camera to support
a small monitor or other video accessory with an exceptional load of 3.5kg.
video 55
SYSTEM GUIDE
SYSTEM GUIDE
The chart below gives an overview of compatibility
among of all the tripods, heads and relevant accessories
depending of the type of camera you want to support.
PRO ENG CAMCORDER
DV _ DV CAM _ DVD PRO _ DIGI BETA _ BETACAM SP _ BETACAM SX
Number of CCD: One
Size of CCD: 1/2” or 2/3”
526
350MVB
350SHMVB
519
351MVB
351MVB2
351MVCF
525MVB
350SPRB
530SPRB
350SPRB
530SPRB
350SPRB
530SPRB
165MV
165MV
181B
114MV
56 video
528XB
114
181B
114MV
516
532ART
542ART
500BALL
500BALLSH
500BALL
500BALLSH
532ART
542ART
515MVB
117B
528XB
350SPRB
530SPRB
350MVB
350SHMVB
350SPRB
530SPRB
165MV
181B
114MV
181B
114MV
181B
114MV
181B
114MV
181B
114
114
181B
114MV
SYSTEM GUIDE
PROFESSIONAL CAMCORDER
DIGITAL PROSUMER CAMCORDER
MINI DV
MICRO DV _ MINI DV _ DVD
Number of CCD: Three
Size of CCD: 1/3”
Number of CCD: One
Size of CCD: 1/4”
501HDV and 503
701RC2
500BALL
500BALLSH
500BALL
500BALLSH
525MVB
700RC2
055WNB
745B
755B
745MF3
755MF3
165
165
127
127VS
127
127VS
117B
532ART
542ART
756XB
756MF3
055WNB
745B
755B
745MF3
755MF3
165
165
165
165
127
127VS
127
127VS
127
127VS
127
127VS
350SPRB
530SPRB
127
127VS
181B
114
181B
114MV
video 57
58 video
Description
035C
SUPER CLAMP
Page
54
Art. N°
521PRO
REMOTE CONTROL PRO FOR SONY/CANON
Description
Page
055SCK2
SUCTION CUP/RETRACTABLE SPIKE FEET
54
521SB
REMOTE CONTROL SPLITTER BOX
055SPK2
REVERSIBLE SPIKE FEET-STAINLESS STEEL
54
522EXTC
REMOTE CONTROL CABLE EXTENSION
43-45
055WNB
VIDEO TRIPOD
29
522EXTC30
REMOTE CONTROL CABLE SUPER EXTENSION
43-45
102
LONG STRAP
52
522P
REMOTE CONTROL FOR PANASONIC
44
114
VIDEO DOLLY
34
522PB12
REMOTE PAN BAR ADAPTER
43
114MV
PORTABLE DOLLY
34
522PB12P
REMOTE PAN BAR ADAPTER
45
117B
VIDEO TRIPOD
29
522PB13
REMOTE PAN BAR ADAPTER
43
127
VIDEO DOLLY
34
522PB13P
REMOTE PAN BAR ADAPTER
45
127VS
BASIC DOLLY
34
522PB14
REMOTE PAN BAR ADAPTER
43
165
TRIPOD SPREADER
35
522PB14P
REMOTE PAN BAR ADAPTER
45
165MV
TRIPOD SPREADER FOR SPIKED FEET
35
522PB16
REMOTE PAN BAR ADAPTER
43
165ST
LOW ANGLE STABILISER
35
522PB16P
REMOTE PAN BAR ADAPTER
45
181B
FOLDING AUTODOLLY
34
522PB18
REMOTE PAN BAR ADAPTER
43
190SCK2N
SUCTION CUP/RETRACTABLE SPIKE FEET
54
522PB18P
REMOTE PAN BAR ADAPTER
45
190SPK2N
REVERSIBLE SPIKE FEET-STAINLESS STEEL
54
522PB22
REMOTE PAN BAR ADAPTER
43
311
MONITOR HOLDER
54
522PB22P
REMOTE PAN BAR ADAPTER
45
319
100 MM TO 75 MM ADAPTER
55
522PB25
REMOTE PAN BAR ADAPTER
43
323
RECTANGULAR VIDEO QUICK RELEASE ADAPTER
21
522PB30
REMOTE PAN BAR ADAPTER
325N
VIDEO HEAD ADAPTER BOWL
55
522SCA
REMOTE CONTROL CABLE STANDARD
350MVB
VIDEO PRO TRIPOD
27
523PRO
REMOTE CONTROL PRO FOR SONY/CANON
350SHMVB
SHORT VIDEO PRO TRIPOD
27
523RC
RAIN COVER FOR REMOTE CONTROL
43-45
350SPRB
MID LEVEL SPREADER
35
524ADAPT
ADAPTER CABLE
43-45
351MVB
LIGHTWEIGHT VIDEO TRIPOD
28
524AX
ZOOM REMOTE CONTROL FOR ANGENIEUX ENG LENSES
47
351MVB2
LIGHTWEIGHT VIDEO TRIPOD
28
524CFI
INTELLIGENT ZOOM REMOTE CONTROL FOR ENG LENSES
47
351MVCF
CARBON FIBER LIGHTWEIGHT VIDEO TRIPOD
28
525MVB
LIGHTWEIGHT VIDEO TRIPOD
26
357
PRO VIDEO QUICK RELEASE ADAPTER
21
526
PRO FLUID VIDEO HEAD
6
357PLONG
PRO VIDEO CAMERA PLATE LONG
21
526,528XBK
KIT
7
401N
QUICK ACTION STRAP
51
526MVBKIT
KIT
402
SHORT STRAP
52
528XB
VIDEO/MOVIE HEAVY TRIPOD
29
440STRAP
LONG STRAP
52
529B
HI HAT
55
441SCK2
SUCTION CUP/RETRACTABLE SPIKE FEET
54
530SPRB
“SQUID” MID LEVEL SPREADER
35
441SPK2
RETRACTABLE SPIKE FEET
54
531SPRB
MID LEVEL SPREADER
35
441STRAP
SHORT STRAP
52
532ART
ART PRO ALUMINUM VIDEO TRIPOD
25
449SP2
REVERSIBLE SPIKED FOOT
54
540BB
BUCKET BACKPACK
50
458HL
HAND A LONG
50
540HL
HAND A LONG
50
482LCD
MINI BALL HEAD LCD
54
540SP
SPACE PAD
51
500BALL
100 MM HALF BALL
55
540STRAP
TRIPOD STRAP
52
500BALLSH
100 MM HALF BALL SHORT
55
542ART
ART PRO CARBON FIBER VIDEO TRIPOD
25
501HDV
PRO VIDEO HEAD
14
553
LEVELLING CENTER COLUMN ANGLE BRACKET
31
501HDV, 351MVB2K VIDEO KIT
15
557B
VIDEO MONOPOD
33
501HDV, 351MVCFK VIDEO KIT
15
558B
VIDEO MONOPOD
33
501HDV, 525PKIT
VIDEO KIT
15
559B
VIDEO MONOPOD
33
501HDV, 745BK
VIDEO KIT
15
560B
VIDEO FLUID MONOPOD
33
501HDV, 745MF3K
VIDEO KIT
15
565
SPIKE FOOT SHOES
54
501HDV, 755BK
VIDEO KIT
15
577
VIDEO QUICK RELEASE ADAPTER
21
501HDV, 755MF3K
VIDEO KIT
15
595B
FIG RIG
36
501HLV
PAN BAR
21
595CLA
FIG RIG CLAMP
39
501PLONG
VIDEO CAMERA PLATE
21
676SP2
RETRACTABLE SPIKE FOOT
54
503
PRO FLUID VIDEO HEAD
12
677SP
RUBBER SPIKE FOOT
54
503, 351MVCFK
VIDEO KIT
13
700RC2
MINI VIDEO HEAD
18
503, 525PKIT
VIDEO KIT
13
700RC2, 756XBK
VIDEO KIT
19
503, 745BK
VIDEO KIT
13
700RC2, 756MF3K
VIDEO KIT
19
503, 745MF3K
VIDEO KIT
13
701RC2
MINI VIDEO HEAD
16
503, 755BK
VIDEO KIT
13
701RC2, 055BK
VIDEO KIT
17
503, 755MF3K
VIDEO KIT
13
701RC2, 745BK
VIDEO KIT
17
503, 351MVB2K
SHORT VIDEO PRO TRIPOD KIT
13
701RC2, 745MF3K
VIDEO KIT
17
503LV
PAN BAR
21
701RC2, 755BK
VIDEO KIT
17
515MVB
LIGHTWEIGHT VIDEO TRIPOD
26
701RC2, 755MF3K
VIDEO KIT
17
516
PRO FLUID VIDEO HEAD
10
745B
MDEVE ALUMINUM VIDEO TRIPOD
32
516, 350MVB
VIDEO KIT
11
745MF3
MDEVE MAGFIBER VIDEO TRIPOD
31
516, 351MVCFK
VIDEO KIT
11
755B
MDEVE ALUMINUM VIDEO TRIPOD
32
516, 515PKIT
VIDEO KIT
11
755MF3
MDEVE MAGFIBER VIDEO TRIPO
31
516, 532ART
VIDEO KIT
11
756XB
MDEVE ALUMINUM VIDEO TRIPOD
32
516, 542ART
VIDEO KIT
11
756MF3
MDEVE MAGFIBER VIDEO TRIPO
31
519
PRO FLUID VIDEO HEAD
8
814
MINI HYDROSTATIC ARM
55
519, 351MVCFK
VIDEO KIT
9
819
SMALL HYDROSTATIC ARM
55
519, 525PKIT
VIDEO KIT
9
823
MEDIUM HYDROSTATIC ARM
55
519, 532ART
VIDEO KIT
9
MBAG100P
PADDED TRIPOD BAG 100CM
49
519, 542ART
VIDEO KIT
9
MBAG120P
PADDED TRIPOD BAG 120CM
49
519LV
PAN BAR
21
MBAG70
UNPADDED TRIPOD BAG 70CM
49
519MVBKIT
VIDEO KIT
9
MBAG80
UNPADDED TRIPOD BAG 80CM
49
520BALL
75 MM HALF BALL
55
MBAG80P
PADDED TRIPOD BAG 80 CM
49
520BALLSH
75 MM HALF BALL SHORT
55
MBAG90P
PADDED TRIPOD BAG 90 CM
49
521
BASIC REMOTE CONTROL FOR SONY/CANON
38-42
MICC1
MICROPHONE HOLDER
39
521CFi
BASIC INTELLIGENT ZOOM REMOTE CONTROL FOR ENG LENS
46
MICC2
MICROPHONE HOLDER
39
521P
BASIC REMOTE CONTROL FOR PANASONIC
38-45
MICC4
MICROPHONE HOLDER
38-42
38
43
43-45
41
7
39
video 59
INDEX
Art. N°
Lino Manfrotto + Co., S.p.A.
Via Sasso Rosso 19
I-36061 Bassano del Grappa (VI) Italia
Tel +39 0424 555 855
Fax +39 0424 808 999
www.manfrotto.com
Product photography: Roberto Bigano/Multistudio
Concept: Claim adv
© Gruppo Manfrotto 2006
Whilst every effort has been made to ensure that the information contained within this catalog is correct, Gruppo Manfrotto srl accepts no liability for errors or omissions. Technical specifications and data are provided for
guidance only. All rights are strictly reserved, Products shown in this catalog are protected by international patents, while this publication (in whole or in part) without written consent from Gruppo Manfrotto srl is strictly
forbidden and punishable by law. Because we constantly aim to improve our products, we reserve the right to amend or alter at any time and without prior notice the specifications of any item detailed in this publication.
LNORDV06,G - ISSUE NUMBER N°2 - 10/06
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement