Complete Product Range Overview
Belimo Americas Headquarters Test Lab, Danbury, CT
2016
Product Range Overview
Effective April 1, 2016
Innovations in Comfort, Energy Efficiency,
and Safety for Your Buildings
Ne
Ne
Ne
w
w
w
ZoneTight Zone Valves
Belimo Energy Valves™
Butterfly Valves
Efficient in Every Way
Solving Low Delta T
Advanced Technology for
High Flow Applications*
*Releasing Summer 2016
Ne
Ne
Retrofit Solutions
Get Up and Running
in Record Time
w
ZIP Economizer™
Fire & Smoke
Damper Actuators
Now Available with BACnet
Communication*
Technology that Saves Lives
*Releasing Summer 2016
BACnet® is a registered trademark of ASHRAE.
• Superior functionality in products designed for today’s intelligent systems.
• Highly developed product technology that allows for reduced energy consumption.
• Extended product life with added comfort, safety, and energy efficiency.
• ISO 9001 Quality Control.
• ISO 14001 Environmental Management System.
www.belimo.us
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
w
EFB Series
270 in-lbs [30 Nm]
Approx. 66 sq. ft.
Power
Supply
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Control Input
Control
Input
MFT
Position Auxiliary
Feedback Switches
●
●
2 SPDT, 3 A (0.5 A inductive) @ 250V
<20♦
VDC Variable, Start 0.5 to 8,
Span 2-10 VDC
75
2-10 VDC (Default)
9.5 (4.5)
PWM adj., 0.02 to 50.0 Seconds
16
Start and Span adj., Start 0.5 to 30 VDC,
Span 2.5 to 32 VDC
●
Floating Point
●
EFB24-S
On/Off
On/Off
●
<20♦
Honeywell Series 90, 0-135 Ω
Spring Return
<20♦
75
0-10 V Phasecut
Motor Drive (Default)
75
9.5 (4.5)
2-10 VDC (Default)
4-20 mA (w/500 Ω Resistor)
Wattage Running/Heater (Holding)
9.5 (4.5)
16
230 VAC + 10%
16
●
120 VAC + 10%
VA Rating, Actuator/Heater
24 to 240 VAC +10%/- 20%, 50/60 Hz
24 to 125 VDC + 10%
●
EFB24 N4
●
EFB120
●
●
21
9.5 (4.5)
75
<20♦
EFB120-S
●
●
21
9.5 (4.5)
75
<20♦
●
●
EFB120-S N4
●
●
75
<20♦
●
●
21
9.5 (4.5)
EFB24-SR
●
14
8 (4.5)
95
<20♦
●
●
EFB24-SR N4
●
14
8 (4.5)
95
<20♦
●
●
EFB24-SR-S
●
14
8 (4.5)
95
<20♦
●
EFB24-MFT
●
16
9.5 (4.5)
60…150 (150)
<20♦
●
● ●
●
●
●
●
EFB24-MFT-S
●
16
9.5 (4.5)
60…150 (150)
<20♦
●
● ●
●
●
●
●
AFB24
●
7.5
5 (2.5)
<75
20♦
●
AFB24-S
●
7.5
5 (2.5)
<75
20♦
●
●
8.5*
7 (3.5)
<75
20♦
●
●
●
●
●
8.5*
7 (3.5)
<75
20♦
●
8.5
5.5 (3)
95
<20♦
●
AFB24-SR-S
●
8.5
5.5 (3)
95
<20♦
●
AFB24-PC
●
10
7.5 (3)
150
<20♦
AFB24-MFT
●
10
7.5 (3)
70…220 (150)
<20♦
●
● ●
●
●
●
●
AFB24-MFT-S
●
10
7.5 (3)
70…220 (150)
<20♦
●
● ●
●
●
●
●
AFB24-MFT95
●
10
7.5 (3)
70…220 (150)
<20♦
●
●
AFB24 N4H
●
7.5/25
5/25(3)
<75
20♦
●
AFB24-S N4H
●
7.5/25
5/25(3)
<75
20♦
●
7/25 (3)
<75
20♦
●
●
AFBUP N4H
●
8.5*/25
AFBUP-S N4H
●
8.5*/25
●
7/25 (3)
<75
20♦
5.5/25 (3)
95
<20♦
●
AFB24-SR-S N4H
●
8.5/25
5.5/25 (3)
95
<20♦
●
AFB24-MFT N4H
●
10/25
7.5/25 (3)
70…220 (150)
<20♦
●
AFB24-MFT-S N4H
●
10/25
7.5/25 (3)
70…220 (150)
<20♦
●
AFB24-MFT95 N4H
●
10/25
7.5/25 (3)
70…220 (150)
NFB24
NFB24-S
NFBUP
NFBUP-S
NFB24-SR
NFB24-SR-S
NFB24-MFT
●
8.5
8.5
6.5**
6.5**
6
6
9
6 (2.5)
6 (2.5)
6 (2.5)
6 (2.5)
3.5 (2.5)
3.5 (2.5)
6.5 (3)
<75
<75
<75
<75
95
95
40…150 (150)
<20♦
<20♦
20♦
20♦
20♦
<20♦
<20♦
<20♦
NFB24-MFT-S
●
9
6.5 (3)
40…150 (150)
NFB24 N4H
●
8.5/25
6/25 (2.5)
<75
NFB24-S N4H
●
8.5/25
●
●
●
NFBUP N4H
NFBUP-S N4H
6/25 (2.5)
<75
●
6.5***/25 6/25 (2.5)
<75
●
6.5***/25 6/25 (2.5)
<75
NFB24-SR N4H
●
6/25
NFB24-SR-S N4H
●
6/25
3.5/25 (2.5)
95
NFB24-MFT N4H
●
9/25
6.5/25 (3)
40…150 (150)
3.5/25 (2.5)
95
<20♦
<20♦
●
●
●
●
●
● ●
●
●
●
●
● ●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
● ●
●
●
●
●
●
● ●
●
●
●
●
●
●
20♦
20♦
●
20♦
<20♦
<20♦
●
<20♦
<20♦
●
●
●
8.5/25
●
●
●
●
●
●
●
AFB24-SR N4H
●
●
●
AFB24-SR
AFBUP-S
NFB Series
90 in-lbs [10 Nm]
Approx. 22 sq. ft.
Running
Time(s)
EFB24
AFBUP
AFB Series
180 in-lbs [20 Nm]
Approx. 45 sq. ft.
Power
Consumption
®
24 VAC + 20%, 50/60 Hz, VDC + 10%
EF, AF, NF,
Spring Return
Damper Actuator
Product Range
●
●
●
●
●
●
●
●
● ●
●
●
●
●
●
●
●
● ●
●
NFB24-MFT-S N4H
9/25 6.5/25 (3) 40…150 (150)
♦ <60 seconds @ -22°F [-30°C].
* 8.5 VA for 120 VAC; 7 VA for 24 VAC, 18 VA for 240 VAC.
** 6.5 VA for 120 VAC; 6 VA for 24 VAC; 9.5 VA for 240 VAC.
NEMA 4 Heater: add “H” to the end of select “N4”, for example NFB24-MFT N4H. All AF/NF NEMA 4 models are configured for a CCW spring return rotation.
AF/NF NEMA 4 actuators without heater option are listed on page 3.
●
●
●
●
1
2
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
●
<75
<25♦
<25♦
●
<75
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
●
●
1 SPDT, 3 A (0.5 A inductive) @ 250V
VDC Variable, Start 0.5 to 8,
Span 2-10 VDC
PWM adj., 0.02 to 50.0 Seconds
Start and Span adj., Start 0.5 to 30 VDC,
Span 2.5 to 32 VDC
Floating Point
On/Off
6 - 9 VDC, 20 VDC Output Voltage
2-10 VDC (Default)
Position Auxiliary
Feedback Switches
MFT
3 kΩ NTC Type 10 Thermistor
2-10 VDC (Default)
4-20 mA (w/500 Ω Resistor)
Floating Point
<40 to 75
<40 to 75
<40 to 75
<40 to 75
<40 to 75
<40 to 75
150
150
150
150
150
95
75…300 (150)
75…300 (150)
150
150
90
90
<75
<75
<75
<75
<75
<75
<30
95
95
95
95
95
75…300 (150)
75…300 (150)
On/Off
5 (2.5)
5 (2.5)
5.5 (3.5)
5.5 (3.5)
5 (3)
5 (3)
2.5 (1)
2.5 (1)
2.5 (1)
2.5 (1)
2.5 (1)
2.5 (1)
2.5 (1)
2.5 (1)
3.5 (1.5)
3.5 (1.5)
2.5 (1)
2.5 (1)
2 (1.3)
2 (1.3)
2 (1.3)
2.5 (1.3)
2.5 (1.3)
2.5 (1.3)
3 (1.5)
2 (1)
2 (1)
2.5 (2)
2.5 (1)
2.5 (1)
2.5 (1)
2.5 (1)
Spring Return
7
7
7.5
7.5
7
7
5
5
5
5
5
5
5
5
6
6
5
5
5
5
5
5
5
5
6
4
4
5.5
4
4
4
4
Control Input
Control
Input
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
●
Motor Drive (Default)
●
Running
Time(s)
Wattage Running (Holding)
230 VAC + 10%
120 VAC + 10%
Power
Consumption
VA Rating, Transformer Sizing
LF24 US
LF24-S US
LF120 US
LF120-S US
LF230 US
LF230-S US
LF24-SR US
LF24-SR-S US
LF Series
LF24-SR-E US
35 in-lbs [4 Nm]
LF24-3 US
Approx. 8.5 sq. ft.
LF24-3-S US
LF24-ECON-R03 US
LF24-MFT US
LF24-MFT-S US
LF24-MFT-20 US
LF24-MFT-S-20 US
LFC24-3-R US
LFC24-3-S US
TFB24
TFB24-S
TFLB24
TFB120
TFB120-S
TFLB120
TFB Series
TFCB120-S
22 in-lbs [2.5 Nm]
TFB24-SR
Approx. 5.5 sq. ft.
TFB24-SR-S
TFB120-SR
TFB24-3
TFB24-3-S
TFB24-MFT
TFB24-MFT-S
♦ <60 seconds @ -22°F [-30°C].
Power
Supply
24 VAC + 20%, 50/60 Hz, VDC + 10%
LF, TF
Spring Return
Damper Actuator
Product Range
EFX Series
270 in-lbs [30 Nm]
Approx. 66 sq. ft.
Power
Supply
NFX Series
90 in-lbs [10 Nm]
Approx. 22 sq. ft.
Running
Time(s)
Control Input
Control
Input
Position Auxiliary Cable
Feedback Switches Options
MFT
EFX120
●
●
21
9.5 (4.5)
75
EFX120-S
●
●
21
9.5 (4.5)
75
<20♦
<20♦
●
<20♦
<20♦
●
●
●
●
●
●
●
●
●
●
●
●
●
16
9.5 (4.5) 60…150 (150) <20♦
9.5 (4.5) 60…150 (150) <20♦
●
●
●
●
●
●
●
16
9.5 (4.5)
75
16
9.5 (4.5)
75
14
8 (4.5)
95
EFX24-SR-S
●
14
8 (4.5)
95
EFX24-MFT
●
16
EFX24-MFT-S
●
EFX24-S N4
●
EFCX24-S N4
●
EFX24-S N4H
●
16/21 9.5/21 (4.5)
75
EFX120-S N4
●
●
21
9.5 (4.5)
75
EFCX120-S N4
●
●
21
9.5 (4.5)
75
EFX120-S N4H
●
●
EFX120-SR N4
●
●
21
●
●
21/22 9.5/22 (4.5)
75
9(5.5)
95
21
9(5.5)
95
14
8 (4.5)
95
●
●
●
<20♦
<20♦
●
●
●
●
<10♦♦
<20♦
●
●
●
●
●
●
●
<20♦
<20♦
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
14/21 8/21 (4.5)
EFX24-MFT-S N4
●
EFX24-MFT-S N4H
●
AFX24
●
9.5 (4.5) 60…150 (150) <20♦
16/21 9.5/21 (4.5) 60…150 (150) <20♦
<75
7.5
5 (2.5)
20♦
AFX24-S
●
16
7.5
5 (2.5)
<75
AFXUP
●
8.5*
7 (3.5)
<75
AFXUP-S
●
8.5*
7 (3.5)
<75
95
AFX24-SR
●
8.5
5.5 (3)
AFX24-SR-S
●
8.5
5.5 (3)
AFX24-MFT
●
10
7.5 (3)
AFX24-MFT-S
●
10
7.5 (3)
AFX24-MFT95
●
10
7.5 (3)
AFX24 N4
●
7.5
5 (2.5)
AFX24-S N4
●
7.5
5 (2.5)
<75
●
20♦
<20♦
●
<20♦
70…220 (150) <20♦
70…220 (150) <20♦
AFXUP N4
●
8.5*
7 (3.5)
<75
AFXUP-S N4
●
8.5*
7 (3.5)
<75
95
AFX24-SR N4
●
8.5
5.5 (3)
AFX24-SR-S N4
●
8.5
5.5 (3)
AFX24-MFT N4
●
10
7.5 (3)
AFX24-MFT-S N4
●
10
7.5 (3)
AFX24-MFT95 N4
●
10
7.5 (3)
NFX24
●
8.5
6 (2.5)
NFX24-S
●
8.5
6 (2.5)
<75
20♦
<20♦
●
<20♦
70…220 (150) <20♦
70…220 (150) <20♦
●
6.5**
6 (2.5)
<75
NFXUP-S
●
6.5**
6 (2.5)
<75
95
NFX24-SR
●
6
3.5 (2.5)
NFX24-SR-S
●
6
3.5 (2.5)
NFX24-MFT
●
9
6.5 (3)
NFX24-MFT-S
●
9
6.5 (3)
NFX24 N4
●
8.5
6 (2.5)
<75
NFX24-S N4
●
8.5
6 (2.5)
<75
6.5**
6 (2.5)
<75
NFXUP-S N4
●
6.5**
6 (2.5)
<75
●
●
20♦
<20♦
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
20♦
20♦
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
6
3.5 (2.5)
95
NFX24-MFT N4
●
9
6.5 (3)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
40…150 (150) <20♦
40…150 (150) <20♦
NFX24-SR-S N4
●
●
●
95
●
●
●
●
●
3.5 (2.5)
●
●
●
●
●
6
●
●
●
●
●
●
●
●
<20♦
<20♦
NFX24-SR N4
●
●
●
●
20♦
20♦
●
●
●
●
20♦
20♦
<20♦
40…150 (150) <20♦
40…150 (150) <20♦
●
●
●
95
NFXUP N4
●
●
95
NFXUP
●
●
●
●
●
●
●
20♦
20♦
70…220 (150) <20♦
<75
20♦
●
●
●
95
70…220 (150) <20♦
<75
20♦
●
●
20♦
20♦
●
●
<20♦
<20♦
EFX24-SR-S N4H
95
●
●
●
●
●
●
●
●
●
<20♦
<10♦♦
EFX24-SR-S N4
●
●
●
●
●
10 ft. (3 m) or 16 ft. (5 m) cable
●
●
<20♦
<20♦
EFX24-SR
2 SPDT, 3 A (0.5 A inductive) @ 250V
VDC Variable, Start 0.5 to 8,
Span 2-10 VDC
2-10 VDC (Default)
PWM adj., 0.02 to 50.0 Seconds
Start and Span adj., Start 0.5 to 30 VDC,
Span 2.5 to 32 VDC
Floating Point
On/Off
Honeywell Series 90, 0-135 Ω
75
2-10 VDC (Default)
4-20 mA (w/500 Ω Resistor)
75
9.5 (4.5)
On/Off
Motor Drive (Default)
9.5 (4.5)
16
Spring Return
Wattage Running/Heater (Holding)
16
●
230 VAC + 10%
●
EFX24-S
120 VAC + 10%
VA Rating, Actuator/Heater
24 to 240 VAC +10%/- 20%, 50/60 Hz
24 to 125 VDC + 10%
EFX24
EFX120-SR-S N4
AFX Series
180 in-lbs [20 Nm]
Approx. 45 sq. ft.
Power
Consumption
®
24 VAC + 20%, 50/60 Hz, VDC + 10%
Custom
Spring Return
Damper Actuator
Product Range
●
●
●
●
●
●
●
●
●
●
●
●
●
● ●
●
● ●
●
●
●
NFX24-MFT-S N4
9
6.5 (3)
♦ <60 seconds @ -22°F [-30°C]. ♦♦ <15 seconds @ -22°F [-30°C]. * 8.5 VA for 120 VAC; 7 VA for 24 VAC, 18 VA for 240 VAC. ** 6.5 VA for 120 VAC; 6 VA for 24 VAC; 9.5 VA for 240 VAC
3
Running
Time(s)
Control Input
Control
Input
Position Auxiliary Cable
Feedback Switches Options
MFT
10 ft. (3 m) or 16 ft. (5 m) cable
1 SPDT, 3 A (0.5 A inductive) @ 250V
VDC Variable, Start 0.5 to 8,
Span 2-10 VDC
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
●
2-10 VDC (Default)
<25♦
●
PWM adj., 0.02 to 50.0 Seconds
75…300 (150)
●
●
Start and Span adj., Start 0.5 to 30 VDC,
Span 2.5 to 32 VDC
2.5 (1)
●
●
Floating Point
4
●
●
On/Off
●
●
●
2-10 VDC (Default)
4-20 mA (w/500 Ω Resistor)
Spring Return
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
<25♦
●
Floating Point
Motor Drive (Default)
<75
<75
<75
<75
<30
95
95
95
95
75…300 (150)
230 VAC + 10%
2 (1.3)
2 (1.3)
2.5 (1.3)
2 (1.3)
3 (1.5)
2 (1)
2 (1)
2.5 (1)
2.5 (1)
2.5 (1)
120 VAC + 10%
●
5
5
5
5
6
4
4
4
4
4
●
On/Off
®
Wattage Running (Holding)
TFX24-MFT-S
♦ <60 seconds @ -22°F [-30°C]
Power
Consumption
VA Rating, Transformer Sizing
TFX Series
22 in-lbs [2.5 Nm]
Approx. 5.5 sq. ft.
TFX24
TFX24-S
TFX120
TFX120-S
TFCX120-S
TFX24-SR
TFX24-SR-S
TFX24-3
TFX24-3-S
TFX24-MFT
Power
Supply
24 VAC + 20%, 50/60 Hz, VDC + 10%
Custom
Spring Return
Damper Actuator
Product Range
4
21
11 (3)
150
35
●
●
GKB24-SR
●
21
11 (3)
150
35
GKB24-3-T N4H*
●
21/21
11/21 (3)
150
35
GKB24-SR-T N4H
●
21/21
11/21 (3)
150
35
●
GKB24-MFT-T N4H†
●
21/21
11/21 (3)
150
35
●
NKQB24-1
●
22
11 (3)
4
4
NKQB24-SR
●
22
11 (3)
4
4
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
2-10 VDC (Default)
●
●
Potentiometer (with Z-SPA for NKQ)
●
●
●
●
●
Add-On
Accessory
S1A or S2A (with Z-SPA for NKQ)
Floating Point
GKB24-3*
2-10 VDC (Default)
4-20 mA (w/500 Ω Resistor)
On/Off
Position
Feedback
Fail-Safe
Control
Input
Motor Drive
Running
Time
Wattage Running/Heater (Holding)
NKQB Series
54 in-lbs [6 Nm]
Approx. 12 sq. ft.
Power
Consumption
VA Rating, Actuator/Heater
GKB Series
360 in-lbs [40 Nm]
Approx. 90 sq. ft.
Power
Supply
24 VAC + 20%, 50/60 Hz, VDC +10
GKB, NKQB
Electronic Fail-Safe
Damper Actuator
Product Range
●
AHKX Series
101 lbf [450 N Force]
Approx. 4” stroke
Control Input
●
GKX24-MFT†
●
21
11 (3)
90, 150
(150)
35
●
35
●
●
GKX24-3-T N4*
●
21
11 (3)
90, 150
(150)
GKX24-SR-T N4
●
21
11 (3)
90, 150
(150)
35
●
GKX24-MFT-T N4†
●
21
11 (3)
90, 150
(150)
35
●
NKQX24-1
●
22
11 (3)
4, 7, 10 (4)
4
NKQX24-SR
●
22
11 (3)
4, 7, 10 (4)
4
●
NKQX24-MFT
●
22
11 (3)
4, 7, 10 (4)
4
●
●
AHKX24-MFT-100
●
22
11 (3)
90, 150
(150)
35
●
●
●
●
●
●
●
●
Potentiometer (with Z-SPA for NKQ)
35
●
S1A or S2A (with Z-SPA for NKQ)
90, 150
(150)
VDC Variable, Start 0.5 to 8,
Span 2 to 10 VDC
11 (3)
PWM adj., 0.02 to 50.0 Seconds
21
Start and Span adj., Start 0.5 to
30 VDC, Span 2.5 to 32 VDC
●
Floating Point
GKX24-SR
On/Off
35
2-10 VDC (Default)
4-20 mA (w/500 Ω Resistor)
90, 150
(150)
Floating Point
11 (3)
On/Off
21
Fail-Safe
●
Motor Drive (Default)
GKX24-3*
●
Position Cable
Add-On
Feedback Options Accessory
MFT
2-10 VDC (Default)
Control
Input
10 ft. (3 m) or 16 ft. (5 m) cable
NKQX Series
54 in-lbs [6 Nm]
Approx. 12 sq. ft.
Running
Time(s)
Wattage Running (Holding)
GKX Series
360 in-lbs [40 Nm]
Approx. 90 sq. ft.
Power
Power
Supply Consumption
VA Rating, Transformer Sizing
Custom
Electronic Fail-Safe
Damper Actuator
Product Range
24 VAC + 20%, 50/60 Hz, VDC + 10%
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
*GK...24-3 is VAC only
†
Piggy back mounting on a single shaft for -MFT wired Master-Slave, 720 in-lbs maximum load, and 1” minimum diameter shaft.
NEMA 4 actuators without heater option are listed below.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
*GK...24-3 is VAC only
†Piggy back mounting on a single shaft for -MFT wired Master-Slave, 720 in-lbs maximum load, and 1” minimum diameter shaft.
●
●
●
●
●
●
●
●
●
●
●
5
<25
<15
●
FSAF24A-S
●
32‡
<25
<15
●
‡
FSAF*A Series
FSAF120A
●
38
<25
<15
●
180 in-lbs [20 Nm]
Approx. 18 sq. ft. @ 350°F
FSAF120A-S
●
38‡
<25
<15
●
FSAFB Series
180 in-lbs [20 Nm]
Approx. 18 sq. ft. @ 250°F
FSAF230A
●
37‡
<25
<15
●
FSAF230A-S
●
37‡
<25
<15
●
FSAFB24-SR
●
9
<75
<20
2-10 VDC
FSAFB24-SR-S
●
9
<75
<20
2-10 VDC
FSNF24 US
●
24
‡
<15
<15
●
FSNF24-S US
●
24‡
<15
<15
●
‡
FSNF Series
FSNF120 US
●
23
<15
<15
●
70 in-lbs [8 Nm]
Approx. 12 sq. ft. @ 350°F
FSNF120-S US
●
23‡
<15
<15
●
‡
FSNF230 US
●
23
<15
<15
●
FSNF230-S US
●
23‡
<15
<15
●
FSLF24 US
●
15
‡
<15
<15
●
FSLF24-S US
●
15‡
<15
<15
●
FSLF Series
FSLF120 US
●
18‡
<15
<15
●
30 in-lbs [3.5 Nm]
Approx. 4 sq. ft. @ 350°F
FSLF120-S US
●
18‡
<15
<15
●
FSLF230 US
●
17‡
<15
<15
●
FSLF230-S US
●
17‡
<15
<15
●
3
<75
<25
●
FSTF24 US
●
FSTF24-S US
●
3
<75
<25
●
FSTF Series♦
FSTF120 US
●
3.5
<75
<25
●
18 in-lbs [2 Nm]
Approx. 1.5 sq. ft. @ 250°F
FSTF120-S US
●
3.5
<75
<25
●
FSTF230 US
●
5.5
<75
<25
●
FSTF230-S US
●
5.5
<75
<25
●
●
●
●
●
●
●
●
●
●
●
●
●
●
‡
VA Rating Note:
The FSAF*A, FSNF, and FSLF series actuators draw more current when driving against any stops. Neither UL nor Belimo require any local fusing or breakers. If used, see individual data sheets
for End Stop current draws and current limit values.
♦
The FSTF series should be used to replace only existing FSTF actuators. The FSLF is recommended for dampers less than 4 sq.ft. in area. Contact Belimo Technical Support for applications
involving small dampers.
6
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
32‡
Auxiliary
Switches
2 SPDT
●
230 VAC
FSAF24A
120 VAC
On/Off
Control
Input
Spring Return
Running
Time(s)
Motor Drive
Power
Consumption
VA Rating
Power
Supply
2 SPST
FSAF*A, FSAFB, FSNF,
FSLF, FSTF
Fire and Smoke
Spring Return Damper
Actuator Product Range
●
7
4.0 (1.5)
150
●
5.5
2.5 (0.5)
95
●
●
AMB24-3-S
●
5.5
2.5 (0.5)
95
●
●
●
5
2.5 (0.4)
95
●
6
3.5 (1.3)
150
NMB24-3
●
4
2.0 (0.2)
95
●
●
NMCB24-3
●
4
2.5 (0.2)
45
●
●
NMB24-SR
●
5
2.5 (0.4)
95
●
●
5
2.5 (0.4)
45
●
●
6
3.5 (1.3)
150
LMB24-3
●
2
1.5 (0.2)
95
●
●
LMCB24-3
●
2.5
1.5 (0.2)
35
●
●
LMB24-3.1
●
2
1.5 (0.2)
95
●
●
LMB24-3-S
●
●
LMB24-3-T
LMCB24-3-T
AMB24-SR
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
CMB Series
18 in-lbs [2 Nm]
Approx. 4.5 sq.ft.
A
NMCB24-SR
NMB24-MFT
LMB Series
45 in-lbs [5 Nm]
Approx. 11 sq.ft.
A
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Add-On
Accessory
1 SPDT, 3A (0.5A Inductive) @ 250V
Quantity of Actuators Included in Bulk Pack
10 kΩ Resistive Feedback
2-10 VDC (Default) Adjustable with MFT
5 kΩ Resistive Feedback
PWM adj., 0.02 to 50.0 Seconds
●
AMB24-3
A
Start and Span adj., Start 0.5 to 30 VDC,
Span 2.5 to 32 VDC
Floating Point
●
Floating Point
On/Off
●
150
On/Off
Motor Drive
150
4.5 (2.0)
2-10 VDC or 4-20 mA (w/500 Ω Resistor)
Wattage Running (Holding)
4.0 (2.0)
6.5
100 VAC to 240 VAC
6
●
NEMA
4/4X
Option
Potentiometer
NMB Series
90 in-lbs [10 Nm]
Approx. 22 sq.ft.
24 VAC ± 20%, 50/60 Hz VDC ±10%
●
GMB24-SR
AMB24-MFT
MFT
Bulk
Pack
S1A or S2A
AMB Series
180 in-lbs [20 Nm]
Approx. 45 sq.ft.
Position
Feedback
®
GMB24-3
GMB24-MFT†
Control Input
Control
Input
VA Rating
GMB Series
360 in-lbs [40 Nm]
Approx. 90 sq.ft.
Power
Power
Running
Supply Consumption
Time
Enclosure (Part No. +N4 or +N4H)1
GMB, AMB, NMB,
LMB, CMB
Non-Spring Return
Damper Actuator
Product Range
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
24 pc.
2
1.5 (0.2)
95
●
●
2
1.5 (0.2)
95
●
●
●
●
●
2.5
1.5 (0.2)
35
●
●
●
●
LMB24-3-T.1
●
2
1.5 (0.2)
95
●
●
●
●
LMB24-3-P5-T
●
2
1.5 (0.2)
95
●
●
●
●
●
LMB24-3-P5-T.1
●
2
1.5 (0.2)
95
●
●
●
●
●
LMB24-3-P10-T
●
2
1.5 (0.2)
95
●
●
●
●
LMB24-SR
●
3
1.5 (0.4)
95
●
●
●
●
LMCB24-SR
●
3
1.5 (0.4)
35
●
●
●
●
LMB24-SR.1
●
3
1.5 (0.4)
95
●
●
●
●
LMB24-SR-T
●
3
1.5 (0.4)
95
●
●
●
●
LMCB24-SR-T
●
3
1.5 (0.4)
35
●
●
●
●
LMB24-SR-T.1
●
3
1.5 (0.4)
95
●
●
●
●
●
●
●
●
●
●
LMB24-MFT
A
●
5
2.5 (1.2)
150
LMB24-HM
B
●
2
1.5 (0.2)
95
●
2
1.5 (0.2)
95
CMB24-3
●
1.5
1.0 (0.2)
35
●
●
CMB24-3.1*
●
1.5
1.0 (0.2)
35
●
●
3.5
1.5 (1.0)
35
●
●
●
36 pc.
36 pc.
●
●
LMB24-10P-HM B
CMB120-3
●
●
●
●
24 pc.
36 pc.
●
●
20 pc.
CMB24-3-T
●
1.5
1.0 (0.2)
35
●
●
CMB24-3-T.1*
●
1.5
1.0 (0.2)
35
●
●
CMB24-SR-R
●
2.5
1.5 (0.5)
35
●
●
CMB24-SR-L
●
2.5
1.5 (0.5)
35
●
●
20 pc.
† Dual mounting on a single shaft is possible for 720 in-lb (-MFT wired Master-Slave). Please call Belimo customer service for details.
Shipped default. 150 seconds running time, 2-10 VDC control input and feedback. Field programmable with MFT tools.
B Drop-in replacement of LM24-M VAV actuator.
1
Heater option for NEMA 4/NEMA 4X has a list price adder.
* Z-PICM
Z PICM position indicator and Z-ARCM
Z ARCM anti-rotation
anti rotation bracket sold separately.
7
15 (1.5)
7
NMQB Series
70 in-lbs [8 Nm]
Approx. 12 sq.ft.
NMQB24-1
●
20
13 (1.5)
4
NMQB24-MFT A
●
20
13 (1.5)
4
LMQB Series
35 in-lbs [4 Nm]
Approx. 8.5 sq.ft.
LMQB24-1
●
20
13 (1.5)
2.5
LMQB24-MFT A
●
20
13 (1.5)
2.5
●
●
●
●
●
●
●
●
●
●
●
Potentiometer
23
Add-On
Accessory
S1A or S2A
●
10 kΩ Resistive Feedback
AMQB24-MFT A
5 kΩ Resistive Feedback
●
2-10 VDC (Default) Adjustable with MFT
7
PWM adj., 0.02 to 50.0 Seconds
15 (1.5)
Start and Span adj., Start 0.5 to 30 VDC,
Span 2.5 to 32 VDC
23
Floating Point
●
On/Off
On/Off
AMQB24-1
Position
Feedback
MFT
2-10 VDC or 4-20 mA (w/500 Ω Resistor)
Motor Drive
AMQB Series
140 in-lbs [16 Nm]
Approx. 16 sq.ft.
100 VAC to 240 VAC
Control Input
Control
Input
Wattage Running (Holding)
Running
Time
VA Rating
Power
Consumption
Floating Point
Power
Supply
24 VAC ± 20%, 50/60 Hz, VDC ±10%
AMQB, NMQB, LMQB
Quick Running
Non-Spring Return
Damper Actuator
Product Range
●
●
●
●
●
●
●
●
●
●
●
●
Shipped default. 2-10 VDC control input and feedback. Field programmable with MFT tools.
Power
Supply
Power
Consumption
Control Input
Control
Input
Position Feedback
MFT
●
AHB24-3-200
●
4.5
2.0 (0.5)
150*
●
●
AHB24-SR-100
●
4.5
2.5 (0.5)
150*
●
●
AHB24-SR-200
●
4.5
2.5 (0.5)
150*
●
●
AHQB24-1-100
●
23
13 (1.5)
7*
AHQB24-MFT-100 A
●
23
13 (1.5)
7*
LHB24-3-100
●
3
1.5 (0.5)
150*
●
●
LHB24-3-200
●
3
1.5 (0.5)
150*
●
●
LHB24-SR-100
●
3
1.5 (0.5)
150*
●
●
LHB24-SR-200
●
3
1.5 (0.5)
150*
●
●
LHQB Series
22 lbf [100 N Force]
4” stroke
LHQB24-1-100
●
23
13 (1.5)
3.5*
LHQB24-MFT-100
●
23
13 (1.5)
3.5*
LUB Series
27 in-lbs [3 Nm]
Approx. 6 sq.ft.
LUB24-3
●
2.5
1.0 (0.5)
150**
LUB24-SR
●
3
3.0 (0.5)
150**
AHQB Series
44 lbf [200 N Force]
4” stroke
LHB Series
34 lbf [150 N Force]
4”or 8” stroke
*Running time is per 4 inches [100 mm] of travel.
**Running time is 150 seconds per 90°.
Shipped default. 2-10 VDC control input and feedback. Field programmable with MFT tools.
●
●
●
●
●
●
●
●
●
●
●
●
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
●
10 kΩ Resistive Feedback
150*
5 kΩ Resistive Feedback
2-10 VDC (Default) Adjustable with MFT
PWM adj., 0.02 to 50.0 Seconds
Floating Point
Start and Span adj., Start 0.5 to 30 VDC,
Span 2.5 to 32 VDC
On/Off
2.0 (0.5)
Floating Point
Motor Drive
4.5
On/Off
Wattage Running (Holding)
2-10 VDC or 4-20 mA (w/500 Ω Resistor)
VA Rating
●
100 VAC to 240 VAC
AHB24-3-100
AHB Series
101 lbf [450 N Force]
4”or 8” stroke
8
Running
Time
®
24 VAC ± 20%, 50/60 Hz, VDC ±10%
AHB, AHQB, LHB,
LHQB, LUB
Non-Spring Return
Damper Actuator
Product Range
Power
Supply
Power
Consumption
Running
Time
Control Input
Control
Input
MFT
4-20 (4)
●
LMX Series
45 in-lbs [5 Nm]
Approx. 11 sq.ft.
LMX24-3
LMX24-3-T
LMX24-SR
LMX24-SR-T
LMX120-3
LMX120-SR
LMX24-MFT
LMX24-MFT95
●
2
2
3
3
4
4.5
5
5
1.5 (0.2)
1.5 (0.2)
1.5 (0.4)
1.5 (0.4)
2.0 (0.5)
2.5 (1.0)
2.5 (1.2)
2.5 (1.2)
95
95
95
95
150
150
35-200 (150)
35-150 (150)
LMQX24-MFT
●
23
13 (1.5)
2.5-10 (2.5)
AHX24-3*
●
4.5
2.0 (0.5)
150*
AHX24-SR*
●
4.5
2.5 (0.5)
150*
●
AHX24-MFT*
●
6
3.5 (1.3)
150*
●
●
AHQX24-MFT-100
●
23
13 (1.5)
7-20 (7)*
●
●
LHX24-3*
●
3
1.5 (0.5)
150*
LHX24-SR*
●
3
1.5 (0.5)
150*
LHX24-MFT*
●
5
2.5 (1.2) 75-150 (150)*
LHQ Series
22 lbf [100 N Force]
LHQX24-MFT-100
●
23
13 (1.5)
3.5-15 (3.5)*
LUX Series
27 in-lbs [3 Nm]
LUX24-3
LUX24-SR
LUX24-MFT
●
2.5
3
5
1.0 (0.5)
1.5 (0.5)
2.5 (1.2)
150
150
75-150 (150)
LMQ Series
35 in-lbs [4 Nm]
AHX Series
101 lbf [450 N Force]
4”, 8”, or 12” stroke
AHQ Series
44 lbf [200 N Force]
LHX Series
34 lbf [150 N Force]
4”, 8”, or 12” stroke
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Potentiometer
13 (1.5)
●
S1A or S2A
23
●
Enclosure (Part No. +N4 or +N4H)1
NMQX24-MFT
●
●
●
●
●
●
●
Terminal Strip NEMA 1/IP20 / 2/IP54
NMQ Series
70 in-lbs [8 Nm]
NMX Series
90 in-lbs [10 Nm]
Approx. 22 sq.ft.
●
●
10 ft. (3 m) Cable / 16 ft. (5 m) Cable
95
95
95
95
150
150
45-150 (150)
45-150 (150)
20-75 (20)
●
●
NEMA
Add-on
4/4X
Accessory
Option
●
VDC Variable, Start 0 to 8,
Span 2-10 VDC
2.0 (0.2)
2.0 (0.2)
2.5 (0.4)
2.5 (0.4)
2.5 (0.6)
3.5 (1.0)
3.5 (1.3)
3.5 (1.3)
3.0 (0.6)
●
●
2-10 VDC (Default)
4
4
5
5
5.5
6.5
6
6
5
●
PWM adj., 0.02 to 50.0 Seconds
●
●
Start and Span adj., Start 0.5 to 30 VDC,
Span 2.5 to 32 VDC
NMX24-3
NMX24-3-T
NMX24-SR
NMX24-SR-T
NMX120-3
NMX120-SR
NMX24-MFT
NMX24-MFT95
NMCX24-MFT
●
On/Off
7-15 (7)
●
Floating Point
Honeywell Series 90, 0-135 Ω
15 (1.5)
●
●
0-20V Phasecut
26
●
●
2-10 VDC (Default)
4-20 mA (w/500 Ω Resistor)
●
●
Floating Point
Motor Drive Range (Default)
AMQX24-MFT
AMQ Series
140 in-lbs [16 Nm]
AMX Series
180 in-lbs [20 Nm]
Approx. 45 sq.ft.
●
On/Off
Wattage Running (Holding)
150
150
150
150
75-300 (150)
95
95
95
95
90
95
95
90-300 (150)
35-120 (35)
75-150 (150)
●
100 to 240 VAC
4.0 (2.0)
4.5 (2.0)
4.0 (1.5)
4.0 (2.0)
4.0 (1.5)
2.5 (0.5)
2.5 (0.5)
2.5 (0.4)
2.5 (0.4)
3.5 (1.3)
3.0 (0.6)
4.0 (1.0)
3.5 (1.3)
3.5 (1.3)
3.5 (1.3)
24 VAC ± 20%, VDC ± 10%
●
6
6.5
7
7
7
5.5
5.5
5
5
5.5
7
7.5
6
6
6
GMX24-3
GMX24-SR
GMX24-PC
GMX120-3
GMX24-MFT†
AMX24-3
AMX24-3-T
AMX24-SR
AMX24-SR-T
AMX24-PC
AMX120-3
AMX120-SR
AMX24-MFT
AMCX24-MFT
AMX24-MFT95
GMX Series
360 in-lbs [40 Nm]
Approx. 90 sq.ft.
Position Custom
Feedback Options
®
VA Rating
Custom
Non-Spring Return
Damper Actuator
Product Range
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
* The LH and AH linear series actuators come in three different stroke lengths [4, 8, or 12 in]. The part number is followed by -100, -200, -300 respectively. The default running time is 150
seconds per 4 inches [100 mm]. Running time is adjustable depending on model: LH Series: 70-270, 140-540, 200-810, on the -100, -200, -300 models respectively.
AH Series: 150-600, 300-1200, 450-1800, on the -100, -200, -300 models respectively. LHQ and AHQ available in 4 inch version only.
† Dual mounting on a single shaft is possible for higher 720 in-lbs (-MFT wired Master-Slave). Please call Belimo customer service for details.
1
Heater option for NEMA 4/NEMA 4X has a list price adder.
9
Control Valve Product Range
Energy Valve Product Range
¾
20
EV075S-103
5.5 - 18.2*
1
25
EV100S-182
8.6 - 28.5*
1¼
32
EV125S-285
11.9 - 39.6*
1½
40
EV150S-396
22.8 - 76.1*
2
50
EV200S-761
30-100**
2
50
EV200S-1000
38 - 127*
2½
65
EV250S-127
54 - 180*
3
80
EV300S-180
95 - 317*
4
100
EV400S-317
149 - 495*
5
125
EV500S-495
214 - 713*
6
150
EV600S-713
38 - 127*
2½
65
EV250S-127-250
54 - 180*
3
80
EV300S-180-250
95 - 317*
4
100
EV400S-317-250
149 - 495*
5
125
EV500S-495-250
214 - 713*
6
150
EV600S-713-250
*V’nom = Maximum flow for each valve body size.
** Applies to 2” Energy Valve model EV200S-1000 only.
10
Equal Percentage
Characteristic
Mode of Operation
The Energy Valve is an energy metering pressure independent control
valve that optimizes, documents, and proves water coil performance.
Product Features
Measures Energy: using its built-in electronic flow sensor and supply and
return temperature sensors.
Controls Power: with its Power Control logic, providing linear heat
transfer regardless of temperature and pressure variations.
Manages Delta T: by solving Low Delta T Syndrome. In addition, it
reduces pumping costs while increasing chiller/boiler efficiency by
optimizing coil efficiency.
Actuator Specifications
Control type
modulating
Manual override
LR, NR, AR, GR, AKR, GKR, EV, AVK
Electrical connection
3 ft. [1 m] cable with ½” conduit fitting
Valve Specifications
Service
Flow characteristic
Controllable flow range
Action
Sizes
End fitting
Materials
Body
Valve
Sensor housing
Ball
Stem
Plug
Seats
Characterizing disc
Stem packing
Media temp range
Body pressure rating
Close-off pressure
Differential pressure
range (ΔP)
Leakage
Inlet length to meet
specified measurement
accuracy
Communication
Conductivity
of media
Remote temperature
sensor length
½”- 2”
2½”- 6”
chilled or hot water, 60% glycol
(open loop and steam not allowed)
equal percentage/linear
75°
stem up - open A to AB
½”, ¾”, 1”, 1¼”, 1½”, 2”, 2½’’, 3’’, 4’’, 5’’, 6’’
NPT female ends (½”- 2”)
pattern to mate with ANSI 125 or 250 flangee (2½”- 6”)
forged brass, nickel plated (½”- 2”)
cast iron - GG25 (2½”- 6”)
forged brass, nickel plated (½”- 2”)
ductile iron - GGG50 (2½”- 6”)
stainless steel
stainless steel
stainless steel (-250)
Teflon® PTFE, stainless steel (-250)
Tefzel® (½”- 2”)
stainless steel (2½”- 6”)
EPDM (lubricated), NLP (-250)
14°F to 250°F [-10°C to +120°C],
39°F to 250°F [4°C to 120°C]**
360 psi (½”- 2”), ANSI 125, Class B (2½”- 6”)
ANSI 250 (2½”-6”) (-250)
200 psi (½”- 2”), 100 psi (2½”- 6”),
varies by size (-250)
see Product Guide and Price List
0%, ANSI Class IV (-250)
5x nominal pipe size (NPS)
BACnet IP, BACnet MS/TP, listed by BTL, web
server, Belimo MP-Bus
min. 20uS/cm (Applies to sizes 2½” [DN65] to
6” [DN150] only.)
2 ft. 7.5 in. [0.8 m] short, 9.8 ft. [3 m] long
32.8 ft. [10 m]
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
3.1 - 10.3*
EV
AKRB(X)24-EV
EV050S-055
GKRB(X)24-EV
15
AVKX24-EV-L
½
Electronic
Fail-Safe
AVKX24-EV-B
1.65 - 5.5*
Non-Spring
Return
LRB(X)24-EV
2-way
NRB(X)24-EV
DN
[mm]
ARB(X)24-EV
Inches
GRB(X)24-EV
GPM Range
Suitable Actuators
EVX24-EV-L
Type
EVX24-EV-B
Flanged ANSI 250
Flanged ANSI 125
NPT
Valve Nominal
Size
Control Valve Product Range
1.65 - 5.5*
½
15
P2050S
6 - 10.3*
¾
20
P2075S
11.1 - 18.2*
1
25
P2100S
18 - 28.5*
1¼
32
P2125S
26.1 - 39.6*
1½
40
P2150S
32.7 - 76.1*
2
50
P2200S
80-100**
2
50
P2200S
80 - 127*
2½
65
P6250S
133 - 180*
3
80
P6300S
195 - 317*
4
100
P6400S
335 - 495*
5
125
P6500S
515 - 713*
6
150
P6600S
Non-Spring
Return
Electronic
Fail-Safe
ePIV
AKRX24-EP
2-way
The Electronic Pressure Independent Control Valve (ePIV) is a
two-way valve which is unaffected by pressure variations in a
system.
Actuator Specifications
Control type
modulating
Manual override
LR, NR, AR, GR, AKR, GKR, EV, AVK
Electrical connection
3 ft. [1 m] cable with
½” conduit fitting
Valve Specifications
Service
Flow characteristic*
P6250S-250
54 - 180*
3
80
P6300S-250
95 - 317*
4
100
P6400S-250
149 - 495*
5
125
P6500S-250
214 - 713*
6
150
P6600S-250
GKRX24-PI
GRX24-PI
AVKX24-PI-L
65
End fitting
Materials
Body
Valve
AVKX24-PI-B
2½
Sizes
EVX24-PI-L
38 - 127*
Sensor housing
Ball
Plug
Stem
Seats
Characterizing disc
Stem packing
Media temp range
Body pressure rating
Close-off pressure
*V’nom = Maximum flow for each valve body size.
** Applies to 2” ePIV models P2200S-800 through P2200S-1000 only.
Note: For NPT and ANSI 125 versions, flows can be field set to 30% of nominal flow rate.
Equal Percentage
Characteristic
Product Features
Provides constant flow regardless of pressure variations in the
system. Simplified valve sizing and selection, no Cv calculations
required.
AKRX24-PI
DN [mm]
LRX24-EP
Inches
NRX24-EP
GPM Range
Suitable Actuators
ARX24-EP
Type
ARX24-PI
Valve Nominal Size
EVX24-PI-B
Flanged ANSI 250
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Flanged ANSI 125
NPT
Electronic Pressure Independent Valve (ePIV) Product Range
Differential pressure
range (ΔP)
Leakage
Flow sensor technology
chilled or hot water, 60% glycol
(open loop and steam not allowed)
equal percentage/linear
½”, ¾”, 1”, 1¼”, 1½”, 2”, 2½’’, 3’’,
4’’, 5’’, 6’’
NPT female ends (½”-2”)
pattern to mate with ANSI 125 flange
(2½”-6”) and ANSI 250 (-250) models
brass, nickel plated (½”-2”)
cast iron-GG25 (2½”-6”)
forged brass, nickel plated (½”-2”)
ductile iron- GGG50 (2½”-6”)
stainless steel
stainless steel (-250)
stainless steel
Teflon® PTFE, stainless steel (-250)
Tefzel® (½”- 2”)
stainless steel (2½”-6”)
EPDM (lubricated), NLP (-250)
14°F to 250°F [-10°C to +120°C],
39°F to 250°F [4°C to 120°C]**
360 psi (½” to 2”)
ANSI 125, Class B (2½”-6”)
ANSI 250 (2½”-6”) (-250)
200 psi (½”- 2”)
100 psi (2½”-6”)
varies by size (-250)
see Product Guide and Price List
0%, ANSI Class IV (-250)
ultrasonic (½”- 2”)
magnetic (2½”-6”)
Inlet length to meet
specified measurement
accuracy
Conductivity of media
5x nominal pipe size (NPS)
min. 20uS/cm (Applies to sizes 2½”
[DN65] to 6” [DN150] only.)
*The flow characteristic can be changed by using the Belimo
PC-Tool software.
**Applies to 2” ePIV models P2200S-800 through P2200S-1000 only.
11
Control Valve Product Range
Factory Set Pressure Independent Characterized Control Valve Product Range
Non-Spring Return
Spring Return
PICCV
Characteristic
LF24-MFT US
Mode of Operation
The Pressure Independent Characterized Control Valve (PICCV) is a
two-way valve which combines the functionality of a control valve
and a pressure regulating valve, creating one precise product which
is unaffected by pressure variations in a system.
Product Features
Constant flow regardless of pressure variations in the system at set
degrees of ball opening. Maximizes chiller, preventing energizing
additional chillers due to low ΔT. Simplified valve sizing and
selection, no Cv calculations required.
(-P) ΔP verification across valve using PT ports.
Valve Specifications
Service
Flow characteristic
Controllable flow range
Sizes
End fitting
Materials
Body
Ball
Stem
Seats
Seat o-rings
Characterizing disc
½” and ¾”
1” to 2”
Stem o-rings
Diaphragm
½” and ¾”
1” to 2”
Regulator components
Spring
Media temp. range
PT ports, optional
Body pressure rating
600 psi
400 psi
Close-off pressure
Differential pressure
(ΔP) range
Leakage
chilled or hot water, 60% glycol max
equal percentage
75°
½”, ¾”, 1”, 1¼”, 1½”, 2”
NPT female ends
brass, nickel plated
chrome plated brass
nickel plated brass
Teflon® PTFE
Viton®
brass
Tefzel®
EPDM (lubricated)
Nomex reinforced silicone
polyester reinforced silicone
stainless steel/brass/Nitrile
stainless steel
0°F to 212°F [-18°C to +100°C]
½” to ¾” integral
1” to 2” external
½”, ¾”, 1”
1¼”, 1½”, 2”
200 psi
5 to 50 psi
ANSI Class IV (0.01% of rated valve
capacity at 50 psi differential)
Tefzel® and Teflon® are registered trademarks of DuPont™
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Actuator Specifications
Control type
-3
on/off, floating point
-MFT
modulating, 2-10 VDC (configurable)
Manual override
LRB, LRX, AFRX, ARX
Electrical connection
3 ft. [1 m] cable with ½” conduit fitting
(additional cable lengths are available)
AFRX24-MFT
2-way NPT
P2050B005 (-P)
P2050B010 (-P)
P2050B015 (-P)
P2050B020 (-P)
P2050B025 (-P)
P2050B030 (-P)
P2050B035 (-P)
P2050B040 (-P)
P2050B045 (-P)
P2050B050 (-P)
P2050B055 (-P)
P2075B060 (-P)
P2075B065 (-P)
P2075B070 (-P)
P2075B075 (-P)
P2075B080 (-P)
P2075B085 (-P)
P2075B090 (-P)
P2075B095 (-P)
P2075B100 (-P)
PICCV-25-011 (-P)
PICCV-25-012 (-P)
PICCV-25-013 (-P)
PICCV-25-014 (-P)
PICCV-25-015 (-P)
PICCV-25-016 (-P)
PICCV-25-017 (-P)
PICCV-25-018 (-P)
PICCV-25-019 (-P)
PICCV-32-018 (-P)
PICCV-32-019 (-P)
PICCV-32-020 (-P)
PICCV-32-021 (-P)
PICCV-32-022 (-P)
PICCV-32-023 (-P)
PICCV-32-024 (-P)
PICCV-32-025 (-P)
PICCV-32-026 (-P)
PICCV-40-026 (-P)
PICCV-40-027 (-P)
PICCV-40-028 (-P)
PICCV-40-029 (-P)
PICCV-40-030 (-P)
PICCV-40-031 (-P)
PICCV-40-032 (-P)
PICCV-40-033 (-P)
PICCV-50-033 (-P)
PICCV-50-034 (-P)
PICCV-50-035 (-P)
PICCV-50-036 (-P)
PICCV-50-037 (-P)
PICCV-50-038 (-P)
PICCV-50-039 (-P)
PICCV-50-040 (-P)
PICCV-50-044 (-P)
PICCV-50-048 (-P)
PICCV-50-052 (-P)
PICCV-50-056 (-P)
PICCV-50-060 (-P)
PICCV-50-065 (-P)
PICCV-50-070 (-P)
PICCV-50-075 (-P)
PICCV-50-080 (-P)
PICCV-50-090 (-P)
PICCV-50-100 (-P)
TFRX24-MFT
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
25
25
32
32
32
32
32
32
32
32
32
40
40
40
40
40
40
40
40
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
LRX120-3
DN [mm]
½
½
½
½
½
½
½
½
½
½
½
¾
¾
¾
¾
¾
¾
¾
¾
¾
1
1
1
1
1
1
1
1
1
1¼
1¼
1¼
1¼
1¼
1¼
1¼
1¼
1¼
1½
1½
1½
1½
1½
1½
1½
1½
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
LRX24-MFT
Inches
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
11
12
13
14
15
16
17
18
19
18
19
20
21
22
23
24
25
26
26
27
28
29
30
31
32
33
33
34
35
36
37
38
39
40
44
48
52
56
60
65
70
75
80
90
100
Suitable Actuators
LRB24-3
Models with (-P) have integral PT ports
GPM
Type
ARX24-MFT
Cast Body
Models with (-P) have external PT ports
12
Forged Body
Valve Nominal Size
Control Valve Product Range
Field Set Pressure Independent Characterized Control Valve Product Range
Valve is supplied at maximum flow in the full open position only.
Field adjustment is necessary to achieve lower flow.
DN [mm]
0...(0.5-1.5)
0...(1.6-3.0)
0...(3.0-5.6)
0...(5.7-10)
0...(11-16)
0...(17-21)
½
½
½
¾
1
1
15
15
15
20
25
25
Type
Suitable Actuators
2-way NPT
Non-Spring Return
P2050B010
P2050B025
P2050B055
P2075B100
PICCV-25-016
PICCV-25-021
LRB24-SA
Inches
KRB24-3
Valve Nominal Size
GPM Range
PICCV
Characteristic
ΔP verification across valve using PT ports (-P)
Inches
DN [mm]
0...(0.5-1.5)
0...(1.6-3.0)
0...(3.0-5.6)
0...(5.7-10)
0...(11-16)
0...(17-21)
½
½
½
¾
1
1
15
15
15
20
25
25
Suitable Actuators
2-way NPT
Non-Spring Return
P2050B010-P
P2050B025-P
P2050B055-P
P2075B100-P
PICCV-25-016-P
PICCV-25-021-P
LRB24-SA
GPM Range
Type
KRB24-3
Valve Nominal Size
Mode of Operation
The Pressure Independent Characterized Control Valve (PICCV)
is a two-way valve which combines the functionality of a control
valve and a pressure regulating valve, creating one precise product
which is unaffected by pressure variations in a system.
Product Features
Once field set the valve will provide constant flow regardless of
pressure variations in the system at set degrees of ball opening.
Maximizes chiller, preventing energizing additional chillers due to
low ΔT. Simplified valve sizing and selection, no Cv calculations
required.
(-P) ΔP verification across valve using PT ports.
(-F) Flow verification using ΔP across flow orifice.
Flow verification using ΔP across orifice (-F)
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Inches
DN [mm]
0...(0.5-1.5)
0...(1.6-3.0)
0...(3.0-5.6)
0...(5.7-10)
0...(11-16)
0...(17-21)
½
½
½
¾
1
1
15
15
15
20
25
25
Suitable Actuators
2-way NPT
Non-Spring Return
P2050B010-F
P2050B025-F
P2050B055-F
P2075B100-F
PICCV-25-016-F
PICCV-25-021-F
LRB24-SA
GPM Range
Type
KRB24-3
Valve Nominal Size
Valve is supplied at maximum flow in the full open position only.
Field adjustment is necessary to achieve lower flow.
Actuator Specifications
Control type
on/off, floating point (KRB),
modulating (LRB..-SA)
Manual override
KRB, LRB...-SA
Electrical connection
3 ft. [1 m] cable (no conduit on KR)
½” conduit fitting on LR only
Valve Specifications
Service
Flow characteristic
Controllable flow range
Sizes
End fitting
Materials
Body
Ball
Stem
Seats
½” and ¾”
1”
Seat o-rings
Characterizing disc
½” and ¾”
1”
Stem o-rings
Diaphragm
½” and ¾”
1”
Regulator components
Spring
Media temp. range
KR valve assembly
Body pressure rating
Close-off pressure
Differential pressure
(ΔP) range
Leakage
chilled or hot water, 60% glycol max
equal percentage
75°
½”, ¾”, 1”
NPT female ends
brass, nickel plated
chrome plated brass
nickel plated brass
®
Teflon PTFE
PTFE / ETFE
®
Viton
brass
Tefzel®
EPDM (lubricated)
Nomex reinforced silicone
polyester reinforced silicone
stainless steel/brass/Nitrile
stainless steel
0°F to 212°F [-18°C to +100°C]
0°F to 176°F [-18°C to +80°C]
600 psi
200 psi
5 to 50 psi
ANSI Class IV (0.01% of rated valve
capacity at 50 psi differential)
Tefzel® and Teflon® are registered trademarks of DuPont™
13
Control Valve Product Range
ZoneTight Zone Valve (QCV) Product Range
Suitable Actuators
3-way
NPT
NonSpring
Return
Fail-Safe
15
Z3050Q-E
½
15
Z3050Q-H
CQK Series
Type
CQ Series
Valve Nominal Size
¾
20
Z3075Q-J
Cv
Inches
DN [mm]
2-way
NPT
5.9*
½
15
Z2050Q-J
9.8*
¾
20
Z2075Q-K
1
½
2.9
4.6
QCV
*Maximum flow. Max value can be field adjusted, see actuator instructions.
Clip Position for Flow Adjustment (GPM)
1
2
3
4
5
6
N
No Clip
Z2050Q-J
½”
0.5
0.7
1.2
1.7
2.4
3.4
4.8
5.9
Z2075Q-K
¾”
Actuator Runtime
0.5
1.0
1.5
2.3
3.3
4.6
6.6
9.8
30 sec.
37 sec.
43 sec.
49 sec.
55 sec.
62 sec.
68 sec.
75 sec.
Mode of Operation
The ZoneTight Zone Valve (QCV) is operated by a rotary actuator.
The actuators are controlled by a standard voltage for on/off control,
a modulating signal, or 3-point control system which move the ball
of the valve to the position dictated by the control system.
Product Features
The equal percentage characteristic of the flow is ensured by
the design of the ball. This characteristic provides linear heating
or cooling output from the coil improving energy efficiency and
comfort.
Actuator Specifications
Control type
-3
on/off, floating point
modulating, 2-10 VDC (configurable)
-SR
Manual override
use actuator to turn valve stem
Electrical connection
3 ft. [1 m] cable with ½” conduit fitting
screw terminals
Power consumption
CQ..
0.3 W running, 1.5 W holding
CQK..
3 W running, 1 W holding
CQ..UP
1.5 W running, 1.1 W holding
Power supply
24V (110-230 VAC, UP series)
Transformer sizing
CQ..
0.6 VA
CQK..
8 VA
CQ..UP
2 VA
Valve Specifications
Service
Flow characteristic
chilled or hot water, 60% glycol
equal percentage (2-way)
linear (3-way)
75° (2-way), 90° (3-way)
½”, ¾”
NPT female ends
Controllable flow range
Sizes
End fitting
Materials
forged brass
Body
Ball
chrome plated brass
Stem
brass
Seats
Teflon® PTFE
O-rings
EPDM (lubricated)
Media temp. range
36°F to 212°F [2°C to 100°C]
Media temp. limit
250°F [120°C]
Maximum allowable
operating temperature
212°F [100°C]
Body pressure rating
360 psi
Close-off pressure
75 psi
Maximum differential
pressure (ΔP)
40 psi
Leakage
0%
Teflon® is a registered trademark of DuPont™
If temperature exceeds 212°F [100°C] operating range due to a
boiler control failure the valve will safely contain the hot water but
manufacturer’s product warranty becomes invalid.
14
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Size
Control Valve Product Range
ZoneTight Pressure Independent Zone Valve (PIQCV) Product Range
DN [mm]
Suitable Actuators
Non-Spring
Return
Fail-Safe
CQK Series
Type
2-way NPT
with PT ports
CQ Series
Valve Nominal Size
GPM
Inches
0.9*
½
15
Z2050QPT-B
1.9*
½
15
Z2050QPT-D
4.3*
½
15
Z2050QPT-F
*Maximum flow. Max value can be field adjusted, see actuator instructions.
PIQCV
Clip Position for Flow Adjustment (GPM)
1
2
3
4
5
6
N
No Clip
Z2050QPT-B
N/A
N/A
0.1
0.2
0.4
0.6
0.8
0.9
Z2050QPT-D
0.2
0.3
0.4
0.5
0.7
1
1.4
1.9
Z2050QPT-F
N/A
0.7
1.0
1.4
2.1
2.9
3.7
4.3
37 sec.
43 sec.
49 sec.
55 sec.
62 sec.
68 sec.
75 sec.
Actuator Runtime 30 sec.
Mode of Operation
The ZoneTight Pressure Independent Zone Valve (PIQCV) is a
two-way valve which combines the functionality of a control valve
and a pressure regulating valve, creating one precise product which
is unaffected by pressure variations in a system.
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Product Features
Constant flow regardless of pressure variations in the system at set
degrees of ball opening. Maximizes chiller ΔT, preventing energizing
additional chillers due to low ΔT. Simplified valve sizing and
selection, no Cv calculations required.
Actuator Specifications
Control type
-3
on/off, floating point
-SR
modulating, 2-10 VDC (configurable)
Manual override
use actuator to turn valve stem
Electrical connection
3 ft. [1 m] cable with ½” conduit fitting
screw terminals
Power consumption
CQ..
0.3 W running, 1.5 W holding
CQK..
3 W running, 1 W holding
CQ..UP
1.5 W running, 1.1 W holding
Power supply
24V (110-230 VAC, UP series)
Transformer sizing
CQ..
0.6 VA
CQK..
8 VA
CQ..UP
2 VA
Valve Specifications
Service
Flow characteristic
Controllable flow range
Sizes
End fitting
Materials
Body
Ball
Stem
Seats
O-rings
Spring
Media temp. range
Media temp. limit
Maximum allowable
operating temperature
PT ports
Body pressure rating
Close-off pressure
Differential pressure
(ΔP) range
Leakage
chilled or hot water, 60% glycol
equal percentage
75°
½”
NPT female ends
forged brass
stainless steel
stainless steel
Teflon® PTFE
PTFE
stainless steel
36°F to 212°F [2°C to 100°C]
250°F [120°C]
212°F [100°C]
optional
360 psi
100 psi
5 to 50 psi
0%
If temperature exceeds 212°F [100°C] operating range due to a
boiler control failure the valve will safely contain the hot water but
manufacturers product warranty becomes invalid.
15
Control Valve Product Range
6-Way Characterized Control Valve Product Range
Type
Suitable Actuators
Non-Spring Return
Inches
DN [mm]
6-way NPT
0.29
0.29
½
15
B315-029-029
0.29
0.46
½
15
B315-029-046
0.29
0.73
½
15
B315-029-073
0.29
1.16
½
15
B315-029-116
0.29
1.50
½
15
B315-029-150
0.46
0.29
½
15
B315-046-029
0.46
0.46
½
15
B315-046-046
0.46
0.73
½
15
B315-046-073
0.46
1.16
½
15
B315-046-116
0.46
1.50
½
15
B315-046-150
0.73
0.29
½
15
B315-073-029
0.73
0.46
½
15
B315-073-046
0.73
0.73
½
15
B315-073-073
0.73
1.16
½
15
B315-073-116
0.73
1.50
½
15
B315-073-150
1.16
0.29
½
15
B315-116-029
1.16
0.46
½
15
B315-116-046
1.16
0.73
½
15
B315-116-073
1.16
1.16
½
15
B315-116-116
1.16
1.50
½
15
B315-116-150
1.50
0.29
½
15
B315-150-029
1.50
0.46
½
15
B315-150-046
1.50
0.73
½
15
B315-150-073
1.50
1.16
½
15
B315-150-116
1.50
1.50
½
15
B315-150-150
0.73
0.73
¾
20
B320-073-073
0.73
1.16
¾
20
B320-073-116
0.73
1.86
¾
20
B320-073-186
0.73
2.9
¾
20
B320-073-290
1.16
0.73
¾
20
B320-116-073
1.16
1.16
¾
20
B320-116-116
1.16
1.86
¾
20
B320-116-186
1.16
2.9
¾
20
B320-116-290
1.86
0.73
¾
20
B320-186-073
1.86
1.16
¾
20
B320-186-116
1.86
1.86
¾
20
B320-186-186
1.86
2.9
¾
20
B320-186-290
2.9
0.73
¾
20
B320-290-073
2.9
1.16
¾
20
B320-290-116
2.9
1.86
¾
20
B320-290-186
2.9
2.9
¾
20
B320-290-290
2.9
4.0
¾
20
B320-290-400
2.9
4.7
¾
20
B320-290-470
4.0
2.9
¾
20
B320-400-290
4.0
4.0
¾
20
B320-400-400
4.0
4.7
¾
20
B320-400-470
4.9
2.9
¾
20
B320-490-290
4.9
4.0
¾
20
B320-490-400
4.9
4.7
¾
20
B320-490-470
Linear Characteristic
Mode of Operation
The control valve is operated by an electronic actuator that
responds to a modulating VDC/4…20 mA control signal.
The actuator will then move the ball of the valve to the
position dictated by the control signal thus changing the flow.
Product Features
Linear characteristic, complete close-off.
Actuator Specifications
Control type
2-10 VDC
multi-function technology (MFT)
Manual override
LR...
Electrical connection
3 ft. [1 m] cable with
½” conduit fitting
Valve Specifications
Service
Flow characteristic
Controllable flow range
Sequence 1
Sequence 2
Sizes
End fitting
Materials
Body
Ball
Stem
Seats
Seat o-rings
Characterizing disc
O-rings
Media temperature range
Body pressure rating
Close-off pressure
Maximum differential
pressure (ΔP)
Leakage
Sequence 1
ly
16
Supp
rn to
Retu e
Sourc
chilled or hot water, 60% glycol
linear
(0 to 30º angle)¹
Dead zone 30º to 60º
(60º to 90º angle)²
½”, ¾”
NPT
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Sequence 2
Cv
LRX24-MFT
Sequence 1
Cv
LRB24-SR
Valve Nominal Size
nickel plated brass
chrome plated brass
nickel plated brass
Teflon® PTFE
EPDM
chrome plated steel
EPDM
43°F to 180ºF [6ºC to 82ºC]
232 psi [1600kPa]
50 psi
15 psi
0%
Sequence 2
To C
oil
oil
To C
Retu
rn
Coil From
rn
Retu Coil
From
Supp
ly
Retu
rn
Sourc To
e
Control Valve Product Range
6-Way Electronic Pressure Independent Characterized Control Valve
Product Range
Valve Nominal Size
Type
Suitable Actuators
V’nom/GPM
Inches
DN [mm]
ePI 6-way
Non-Spring Return
5.5
½
15
EP315
10.4
¾
20
EP320
LRX24-EP6
Flow
Linear Characteristic
Mode of Operation
The control valve is operated by an electronic actuator that
responds to a modulating VDC/4…20 mA control signal.
The actuator will then move the ball of the valve to the
position dictated by the control signal and change the flow.
Product Features
Linear characteristic, complete close-off.
Actuator Specifications
Control type
modulating
Manual override
LRX24-EP6
Electrical connection
3 ft. [1 m] cable with
½” conduit fitting
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Valve Specifications
Service
Flow characteristic
Controllable flow range
Sequence 1
Sequence 2
Sizes
End fitting
Materials
Body
Ball
Stem
Seats
Seat o-rings
Characterizing disc
O-rings
Media temperature range
Body pressure rating
Close-off pressure
Maximum differential
pressure (ΔP)
Leakage
Sequence 1
ly
Supp
rn to
Retu e
Sourc
chilled or hot water, 60% glycol
linear
(0 to 30º angle)¹
Dead zone 30º to 60º
(60º to 90º angle)²
½”, ¾”
NPT
nickel plated brass
chrome plated brass
nickel plated brass
Teflon® PTFE
EPDM
chrome plated steel
EPDM
43°F to 180ºF [6ºC to 82ºC]
232 psi [1600kPa]
50 psi
15 psi
0%
Sequence 2
To C
oil
oil
To C
Retu
rn
Coil From
rn
Retu Coil
From
Supp
ly
Retu
rn
Sourc To
e
17
Control Valve Product Range
Characterized Control Valve (CCV) Product Range
Type
Suitable Actuators
3-way
NPT
½
15
B207(B)
B307(B)
0.46
½
15
B208(B)
B308(B)
0.8
½
15
B209(B)
B309(B)
1.2
½
15
B210(B)
B310(B)
1.9
½
15
B211(B)
B311(B)
3
½
15
B212(B)
B312(B)
4.7
½
15
B213(B)
B313(B)
7.4
½
15
B214(B)
10
½
15
B215(B)
16
½
15
B216(B)* B316(B)*
4.7
¾
20
B217(B)
B317(B)
7.4
¾
20
B218(B)
B318(B)
10
¾
20
B219(B)
14
¾
20
B220(B)*
14
¾
20
B320(B)
24
¾
20
B221(B)* B321(B)*
7.4
1
25
B222
B322
10
1
25
B223
B323
19
1
25
B224
30
1
25
B225*
10
1¼
32
B229
19
1¼
32
B230*
10
1¼
32
19
1¼
32
25
1¼
32
B231
37
1¼
32
B232*
19
1½
40
B238
B338
29
1½
40
B239
B339
37
1½
40
B240*
B340
46
1½
40
29
2
50
37
2
50
46
2
50
B249
B349
57
2
50
B250*
B350
65
2
50
B251
68
2
50
B351
83
2
50
B352
85
2
50
B252
120
2
50
B253
240
2
50
B254*
Spring
Return
NEMA
4
CCV
Equal Percentage
Characteristic
Mode of Operation
The Characterized Control Valve is operated by a rotary
actuator. The actuators are controlled by a standard voltage
for on/off control, a modulating signal, or floating point
control system which move the ball of the valve to the
position dictated by the control system.
LF Series
NR Series
B315(B)
Product Features
The equal-percentage characteristic of the flow is ensured by
the integral characterizing disc. This characteristic provides
linear heating or cooling output from the coil improving
energy efficiency and comfort.
Actuator Specifications
Control type
on/off, floating point, 2-10 VDC,
multi-function technology (MFT)
Manual override
TR, LR, AR, NR, AFR series
Electrical connection
3 ft. [1 m] cable with ½”
conduit fitting or covered screw
terminal strip
B325*
Valve Specifications
Service
Flow characteristic
B329
B348
(B) Models with chrome plated brass ball and nickel plated brass stem
AFR Series
B347
AFR Series
Sizes
End fitting
Materials
Body
Ball
Stem
Seats
Seat o-rings
Characterizing disc
½”- 1 ½” (2-way)
½”-1” (3-way)
2” (2-way) B248-B249
2” (2-way) B251-B253
1¼”- 2” (3-way)
Stem o-rings
Media temp. range
Body pressure rating
2-way
All ½”, ¾”, and 1”
1¼” up to B230
1¼” from B231
1½” - 2”
3-way
All ½”, ¾”, and 1”
1¼”- 2”
Close-off pressure
Maximum differential
pressure (ΔP)
Leakage
AR Series
Controllable flow range
B331
AR Series
B330
B341
B248
* Models without characterizing discs.
18
NEMA
4X
LR Series
Cv
Non-Spring
Return
chilled or hot water, up to
60% glycol
A-port equal percentage
B-port modified for constant
common port flow
75°
½”, ¾”, 1”, 1¼”, 1½”, 2”
NPT female ends
forged brass, nickel plated
stainless steel or chrome plated brass
stainless steel or nickel plated brass
Teflon® PTFE
EPDM
Tefzel®
Tefzel®
Tefzel®
stainless steel
stainless steel
EPDM (lubricated)
0°F to 250°F [-18°C to +120°C]
600 psi
600 psi
400 psi
400 psi
600 psi
400 psi
200 psi
50 psi
0% for A to AB
< 2.0% for B to AB
Cv rating
B port: 70% of A to AB Cv
Tefzel® and Teflon® are registered trademarks of DuPont
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
2-way
NPT
TFR Series
Inches
DN
[mm]
TR Series
Valve Nominal Size
Control Valve Product Range
Characterized Control Valve (CCV) Product Range
Inches
DN [mm]
2-way
NPT
60
2½
65
B261
75
2½
65
B262
110
2½
65
B263
150
2½
65
B264
210
2½
65
B265*
70
3
80
B277
130
3
80
B278
170
3
80
B280*
* Models without characterizing disc
Spring
Return
NEMA 4
AR/AFR Series
Cv
Suitable Actuators
NonSpring
Return
AFR Series
Type
AR Series
Valve Nominal Size
CCV
Equal Percentage
Characteristic
Mode of Operation
The Characterized Control Valve is operated by a rotary
actuator. The actuators are controlled by a standard voltage
for on/off control, a modulating signal, or floating point
control system which move the ball of the valve to the
position dictated by the control system.
Product Features
The equal-percentage characteristic of the flow is ensured by
the integral characterizing disc. This characteristic provides
linear heating or cooling output from the coil improving
energy efficiency and comfort.
Actuator Specifications
Control type
on/off, floating point, 2-10 VDC,
multi-function technology (MFT)
Manual override
AR and AFR series
Electrical connection
3 ft. [1 m] cable with ½”
conduit fitting or covered screw
terminal strip
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Valve Specifications
Service
chilled or hot water, up to
60% glycol
A-port equal percentage
75°
2½”, 3”
NPT female ends
Flow characteristic
Controllable flow range
Sizes
End fitting
Materials
Body
forged brass, nickel plated
Ball
stainless steel
Stem
stainless steel
Seats
Teflon® PTFE
Seat o-rings
EPDM
Characterizing disc
Tefzel®
Stem o-rings
EPDM (lubricated)
Media temp. range
0°F to 212°F [-18°C to +100°C]
Body pressure rating
400 psi
Close-off pressure
100 psi
Maximum differential
pressure (ΔP)
30 psi
Leakage
0% for A to AB
Tefzel® and Teflon® are registered trademarks of DuPont
19
Control Valve Product Range
Characterized Control Valve (CCV) Product Range
B6250S-070
110
2½
65
B6250S-110
110
3
80
B6300S-110
186
4
100
B6400S-186
290
5
125
B6500S-290
400
6
150
B6600S-400
NEMA
4X
AR
65
AFR
2½
NEMA 4
GR
70
Electronic
Fail-Safe
GKR
Inches
Spring
Return
AFR
Cv
Suitable Actuators
Non-Spring
Return
GR
2-way
Flanged
CCV
GKR
Type
DN
[mm]
AR
Valve Nominal Size
Equal Percentage
Characteristic
Mode of Operation
The Characterized Control Valve is operated by a rotary
actuator. The actuators are controlled by a standard voltage for
on/off control, a modulating signal, or floating point control
system which move the ball of the valve to the position dictated
by the control system.
Product Features
The equal-percentage characteristic of the flow is ensured by
the integral characterizing disc. This characteristic provides
linear heating or cooling output from the coil improving energy
efficiency and comfort.
Valve Specifications
Service
Flow characteristic
Controllable flow range
Sizes
End fitting
Materials
Body
Ball
Stem
Seats
Seat o-rings
Characterizing disc
O-rings
Media temp. range
Body pressure rating
Close-off pressure
Maximum differential
pressure (ΔP)
Leakage
20
chilled or hot water, up to
60% glycol max.
A-port equal percentage
75°
2½”, 3”, 4”, 5”, 6”
ANSI Class 125 flange
cast iron GG25
stainless steel
stainless steel
Teflon® PTFE
EPDM rubber
stainless steel
EPDM (lubricated)
0°F to 250°F [-18°C to +120°C]
ANSI 125, Class B
°F
Psi
-20° to +150°
200
200°
180
225°
180
250°
175
100 psi
50 psi
0% for A to AB
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Actuator Specifications
Control type
on/off, floating point, 2-10 VDC,
multi-function technology (MFT)
Manual override
AR, GR, AFR and GKR series
Electrical connection
3 ft. [1 m] cable with ½”
conduit fitting or covered screw
terminal strip
Control Valve Product Range
High Temperature Characterized Control Valve (HTCCV)
Product Range
DN [mm]
2-way NPT
0.29
½
15
B215HT029
0.46
½
15
B215HT046
0.73
½
15
B215HT073
1.16
½
15
B215HT116
1.86
½
15
B215HT186
2.90
½
15
B215HT290
4.55
½
15
B215HT455*
1.86
¾
20
B220HT186
2.90
¾
20
B220HT290
4.64
¾
20
B220HT464
7.31
¾
20
B220HT731
9.28
¾
20
B220HT928
13.20
¾
20
B220HT1320
4.64
1
25
B225HT464
7.31
1
25
B225HT731
11.60
1
25
B225HT1160
18.56
1
25
B225HT1856
28.00
1
25
B225HT2800
* Modified equal percentage.
Non-Spring Return
Spring Return
TFR Series
Inches
HTCCV
T
Equal Percentage
Characteristic
Mode of Operation
The control valve is operated by an electronic actuator
that responds to a standard voltage for on/off control, by
a modulating VDC/4…20 mA, or 3-point control system.
The actuator will then move the ball of the valve to the
position dictated by the control signal or voltage and
change the flow.
LR Series
Cv
Suitable Actuators
LF Series
Type
TR Series
Valve Nominal Size
Product Features
Equal-percentage characteristic of the flow. B215HT455
model has a modified equal percentage characteristic.
Actuator Specifications
Control type
on/off, floating point, 2-10 VDC
multi-function technology (MFT)
Manual override
only TR, LR series
Electrical connection
3 ft. [1 m] cable with ½”conduit
fitting (except TR)
Valve Specifications
Service
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Flow characteristic
Controllable flow range
Sizes
End fitting
Materials
Body
Ball
Stem
Seat
Stem packing
Characterizing disc
O-rings
Body pressure rating
Media temperature range
Steam
Water
Close-off pressure
Maximum differential
pressure (ΔP)
Steam
Water
Maximum inlet pressure
Steam
Leakage
hot water, up to 60% glycol,
steam
A-port equal percentage
75°
½”, ¾”, 1”
NPT female ends
brass (DZR) P-CuZn35Pb2
stainless steel
stainless steel
ETFE
Viton®
ETFE
EPDM (lubricated)
600 psi
250°F [120°C]
60°F to 266°F [16°C to 130°C]
200 psi
15 psi
60 psi partially open ball
116 psi full open only
(Model #B215HT455)
15 psi
0%
21
Control Valve Product Range
Ball Valve Product Range
LF Series
NF
Series
B2050VS-02*
½
15
B2050VS-04*
½
15
B2050VS-15*
30
¾
20
B219VS
51
¾
20
B220VS
43
1
25
B224VS
68
1
25
B225VS
48
1¼
32
B232VS
84
1½
40
B239VS
177
1½
40
B240VS
108
2
50
B249VS
15
½
15
B2050VSS-15*
30
¾
20
B219VSS
43
1
25
B224VSS
108
2
50
B249VSS
6.4
½
15
B315L**
12.8
¾
20
B320L**
11
1
25
B325L**
34
1¼
32
B332L**
57
1½
40
B340L**
87
2
50
B350L**
GM
AF Series
LR Series
LFR Series
AM
NM
Series
GM Series
AM
Series
4
15
AF Series
B2050VS-01*
15
LF
15
½
Spring
Return
NF
½
2
Non-Spring
Return
Mode of Operation
The control valve is operated by an electronic actuator that
responds to a standard voltage for on/off control, by a
modulating VDC/4…20 mA, or 3-point control system. The
actuator will then move the ball of the valve to the position
dictated by the control signal thus changing the flow.
Product Features
Modified equal percentage of flow for B2. Modified linear flow
for B3.
B3...L valves are for diverting applications and are not rated
for steam.
Actuator Specifications
Control type
on/off, floating point,
modulating, 2-10 VDC
multi-function technology (MFT)
Manual override
LM, NM, GM, AM, SY, AF, NF, GK
Electrical connection
3 ft. [1 m] cable with
½” conduit fitting (excluding SY)
Valve Specifications
Service
Flow characteristic
AFR Series
1
3-way
NPT
SY Series
2-way NPT
LM Series
DN [mm]
NR
Inches
AR
Series
Cv
Suitable Actuators
* For hot only or cold only applications. Not for temperature changeover applications.
** Not for steam applications
NOTE: Industrial ball valves (B2..VS, B2..VSS) have serviceable components. Proper maintenance of these
parts will ensure a longer in-service life for the valves. The seats of these valves will require replacement at
an interval consistent with number of full cycles the valve has be operated, or as field condition dictates.
Sizes
End fitting
Materials
Body
Ball
Stem
Seats
2-way
3-way
Stem packing
2-way NPT
O-rings
Media temp range
B2..VS
B2..VSS
B3...L
Body pressure rating
3-way
Maximum inlet pressure
Steam
Leakage
22
chilled or hot water,
(60% glycol), steam
modified equal percentage (B2),
modified linear (B3...L)
½”, ¾”, 1”, 1¼”, 1½”, 2”
FNPT
bronze (B2..VS)
stainless steel (B2..VSS)
nickel plated brass (B3..L)
stainless steel, bronze
(B2050VSS-15)
chrome plated brass (B3..L)
stainless steel
nickel plated brass (B3..L)
RPTFE
Teflon PTFE
RPTFE
NPT EPDM (B3..L)
-22°F to +280°F [-30°C to +138°C]
-22°F to +298°F [-30°C to +148°C]
0°F to 250°F [-18°C to +120°C]
600 psi DN 15-25 (B3..L ½”-1”)
400 psi DN 32-50 (B3..L 1¼” - 2”)
35 psi B2..VS
50 psi B2..VSS
ANSI Class IV (B2..VS, VSS)
0% (B3..L)
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Type
NM Series
Valve Nominal Size
Control Valve Product Range
V Ball Valve Product Range
Suitable Actuators
2-way
Flanged
024
1
25
B2100VB-024
055
1½
40
B2150VB-055
077
2
50
B2200VB-077
207
3
80
B6300VB-207
350
4
100
B6400VB-350
507
6
150
B6600VB-507
Non-Spring
Return
Spring
Return
Electronic
Fail-Safe
AF
2-way NPT
NF Series
DN
[mm]
AM Series
Inches
GM
Cv
GK Series
Type
SY Series
Valve Nominal Size
NOTE: Industrial ball valves have serviceable components. Proper maintenance of these parts will ensure a longer
in-service life for the valves. The seats of these valves will require replacement at an interval consistent with number
of full cycles the valve has be operated, or as field condition dictates.
Equal Percentage
Characteristic
Mode of Operation
The control valve is operated by an electronic actuator
that responds to a standard voltage for on/off control,
by a modulating VDC/4…20 mA, or 3-point control
system. The actuator will then move the ball of the
valve to the position dictated by the control signal thus
changing the flow.
Product Features
Equal percentage of flow
300:1 rangeability
ANSI Leakage Class IV
Actuator Specifications
Control type
on/off, floating point,
modulating, 2-10 VDC
multi-function technology (MFT)
Manual override
all models
Electrical connection
3 ft. [1 m] cable with
½” conduit fitting, terminal block
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Valve Specifications
Service
Flow characteristic
Sizes
End fitting
Materials
Body
Characterizing ball
Stem
Seats
O-rings
Stem packing
Bushings
Media temp. range
Body pressure rating
Maximum ΔP steam
Maximum ΔP water
Close-off pressure
Water
Steam
Maximum inlet pressure
Steam
Leakage
chilled or hot water,
(60% glycol), steam
equal percentage
1”, 1½”, 2”, 3”, 4”, 6”
SAE NPT female (1” to 2”)
ANSI flanged (3” to 6”)
carbon steel
hardened chrome plated
stainless steel
stainless steel
Teflon®
ALFAS
spring loaded Teflon® V-ring
PEEK
380°F max.
NPT ANSI 300 (1” to 2”)
Flanged ANSI 150 (3” to 6”)
100 psi
100 psi
150 psi
200 psi
200 psi
ANSI Class IV
23
Control Valve Product Range
Pipe Package Product Range
2-Way
Zone
Valve
Lengths
½
15
12”, 18”, 24”
¾
20
12”, 18”, 24”
1
25
12”, 18”, 24”
1¼
32
18”, 24”, 36”
1½
40
18”, 24”, 36”
2
50
24”, 36”
½
15
12”, 18”, 24”
¾
20
12”, 18”, 24”
1
25
12”, 18”, 24”
1¼
32
18”, 24”, 36”
1½
40
18”, 24”, 36”
2
50
24", 36"
½
15
12”, 18”, 24”
¾
20
12”, 18”, 24”
1
25
12”, 18”, 24”
1¼
32
18”, 24”, 36”
1½
40
18”, 24”, 36”
2
50
24", 36"
½
15
12”, 18”, 24”
¾
20
12”, 18”, 24”
1
25
12”, 18”, 24”
Manual Balance Valve Technical Specifications
Service
chilled or hot water,
60% glycol
Sizes
½”, ¾”, 1”, 1¼”, 1½”, 2”
Materials
Body
forged brass
chrome plated/forged
Ball
brass
Stem
extruded brass
Union
forged brass
Tailpiece
forged brass
Gland nut
extruded brass
Seats & packing
virgin PTFE
O-rings
Viton
Venturi
extruded brass
Readout port body & cap extruded brass
Readout port seal
Nordel
Memory stop
forged brass
Pressure/temperature ratings
½” to 2”
400 psi
Component temperature
300°F maximum
0°F to 250°F
Media temperature range
[-18°C to +121°C]
Leakage
0%
24
Body End/
Tailpiece
End
Body End/
Tailpiece
End
Strainer Technical Specifications
Service
chilled or hot water,
60% glycol
Sizes
½”, ¾”, 1”, 1¼”, 1½”, 2”
Materials
Body
forged brass
Union nut
forged brass
chrome plated/forged
Ball
brass
Stem & gland nut
forged brass
Tailpiece
forged brass
Seals & packing
PTFE
Stem o-rings
Viton
Strainer screen
304 stainless steel /
20 mesh standard
Readout port body & cap extruded brass
Readout port seal
Nordel
Pressure/temperature ratings
½” to 2”
600 psi
Component temperature
325°F maximum
0°F to 250°F
Media temperature range
[-18°C to +121°C]
Leakage
0%
Hose Technical Specifications
Materials
External braiding
stainless steel AISI 304
Crimping ferrules
stainless steel AISI 304
Connectors
machined brass
Fiber gasket
BA-U fiber washer
Core
formulated EPDM
Operating & burst
pressure rating
½”
375 psi operating
1500 psi burst pressure
¾”
300 psi operating
1200 psi burst pressure
1”
225 psi operating
900 psi burst pressure
1¼”
200 psi operating
800 psi burst pressure
1½”
175 psi operating
600 psi burst pressure
2”
150 psi operating
500 burst pressure
5°F to 230°F
[-15°C to +110°C]
Component temperature
less than 41°F with use of
glycol additive.
Note: Media temperature may be limited by the hose rating
Union Technical Specifications
Service
chilled or hot water,
60% glycol
Sizes
½”, ¾”, 1”, 1¼”, 1½”, 2”
Materials
Body
forged brass
Union nut
forged brass
Tailpiece
forged brass
Gasket
EPDM
glass reinforced nylon
Insulator
(dielectric)
Readout port body & cap extruded brass
Readout port seal
Nordel
Pressure/temperature ratings
½” to 2”
400 psi
Component temperature
250°F maximum
0°F to 250°F
Media temperature range
[-18°C to +121°C]
Isolation Valve Technical Specifications
Service
chilled or hot water,
60% glycol
Sizes
½”, ¾”, 1”, 1¼”, 1½”, 2”
Materials
Body
forged brass
Gland nut
extruded brass
chrome plated/
Ball
hot forged brass
Stem
extruded brass
Union nut
forged brass
Tailpiece
forged brass
virgin PTFE
Seats
Packing
virgin PTFE
Stem o-rings
Viton
Readout port body & cap extruded brass
Readout port seal
Nordel
Pressure/temperature ratings
½” to ¾”
600 psi
1” to 2”
500 psi
Component temperature
300°F maximum
0°F to 212°F
Media temperature range
[-18°C to +100°C]
Leakage
0%
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
3-Way
CCV
Body End/
Tailpiece
End
DN
[mm]
M-NPT, Sweat, FNPT, Press Fit/M-NPT
2-Way
CCV
Body End/
Tailpiece
End
Inches
Strainer
F-NPT, Sweat, Press Fit/M-NPT
PICCV
Union
Manual
Balancing
Valve
F-NPT, Sweat,
Press Fit/ M-NPT
Valve
Series
Hoses
Isolation
Valve
F-NPT, Sweat, Press Fit/ M-NPT
Valve
Nominal Size
Control Valve Product Range
Globe Valve Product Range
Suitable Actuators
0.4
½
15
G212
–
1.3
½
15
G213
–
2.2
½
15
G214
–
4.4
½
15
G215
–
0.4
½
15
G212S
–
1.3
½
15
G213S
–
2.2
½
15
G214S
G314
4.4
½
15
G215S
G315
4.4
½
15
–
G315D
5.5
¾
20
G219
–
7.5
¾
20
G220
–
5.5
¾
20
G219S
–
7.5
¾
20
G220S
G320
7.5
¾
20
–
G320D
10
1
25
G224
–
14
1
25
G225
–
10
1
25
G224S
–
14
1
25
G225S
G325
14
1
25
–
G325D
20
1¼
32
G232
–
20
1¼
32
G232S
G332
20
1¼
32
–
G332D
28
1½
40
G240
–
28
1½
40
G240S
G340
28
1½
40
–
G340D
40
2
50
G250
–
40
2
50
G250S
–
41
2
50
–
G350
40
2
50
–
G350D
Non-Spring
Return
Spring
Return
Electronic
Fail-Safe
LVK Series
3-way
NPT
Mode of Operation
The control valve is operated by an electronic actuator that responds
to a standard voltage for on/off control, by a modulating VDC/4…20
mA, 3-point control system. The actuator will then move the plug of
the valve to the position dictated by the control signal thus changing
the flow.
Product Features
Equal percentage (G2) and linear (G3) flow curve options available
for a wide variety of HVAC applications. Capable of being used for
heating, cooling, and steam service. Repack and rebuild kits are
available to extend the life of the valve without full replacement.
Actuator Specifications
Control type
on/off, floating point, 2-10 VDC,
multi-function technology (MFT)
Manual override
all models except LF
Electrical connection
3 ft [1 m] cable with ½” conduit fitting
Valve Specifications
Service
Flow characteristic
SVK Series
2-way
NPT
NF Series
DN
[mm]
AFX Series
Inches
LV Series
Cv
LF Series
Type
SV Series
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Valve Nominal
Size
Sizes
End fitting
Materials
Body
Stem
Plug
Seat
Stem packing
Disc / Seal
Media temp. range
Body pressure rating
Maximum inlet pressure
Steam
Maximum differential
pressure (ΔP)
Water
Steam
Rangeability
chilled or hot water, 60% glycol, steam
G2 - equal percentage
G2S, G3, G3D - linear
½”, ¾”, 1”, 1¼”, 1½”, 2”
NPT female ends
bronze
stainless steel
brass
stainless steel: G2..S
bronze
stainless steel: G2..S
spring loaded TFE
composition EPDM G2
Teflon® G2...S
refer to valve specification pages in
the Product Guide and Price List
250 psi G2, G3..., ½”- 2”
35 psi G2
100 psi G2...S
35 psi (241 kPa)
20 psi (138 kPa) G2
35 psi (241 kPa) G2...S
5:1 (G212..)
15:1 (G213..)
25:1 (G214..)
40:1 (G215..)
50:1 (G219..)
60:1 (G220.., G224..)
75:1 (all others)
500:1 (G3..)
25
Control Valve Product Range
Globe Valve Product Range
Type
2½
65
G665C
65
2½
65
G665CS
65
2½
65
G665C-250
65
2½
65
G665CS-250
65
2½
65
G665LCS
85
3
80
G680C
85
3
80
G680CS
85
3
80
G680C-250
85
3
80
G680CS-250
85
3
80
G680LCS
170
4
100
G6100C
170
4
100
G6100CS
170
4
100
G6100C-250
170
4
100
G6100CS-250
170
4
100
G6100LCS
263
5
125
G6125C
263
5
125
G6125CS
263
5
125
G6125C-250
263
5
125
G6125CS-250
263
5
125
G6125LCS
344
6
150
G6150C
344
6
150
G6150CS
344
6
150
G6150C-250
344
6
150
G6150CS-250
344
6
150
G6150LCS
Spring
Return
Electronic
Fail-Safe
Mode of Operation
The control valve is operated by an electronic actuator
that responds to a standard voltage for on/off control, a
modulating VDC/4…20 mA, or 3-point control system. The
actuator will then move the plug of the valve to the position
dictated by the control signal thus changing the flow.
The G...(C)(CS)(LCS) Series valve is a pressure compensated valve that allows high close-off ratings
while utilizing standard actuation.
Product Features
Equal percentage (G6) and linear (G7) flow curve options
available for a wide variety of HVAC applications. Capable of
being used for heating, cooling, and steam service. Repack
and rebuild kits are available to extend the life of the valve
without full replacement.
Actuator Specifications
Control type
on/off, floating point, 2-10 VDC
multi-function technology (MFT)
Manual override
all models
Electrical connection
3 ft [1 m] cable with
½” conduit fitting
Valve Specifications
Service
Flow characteristic
G6
G6LCS
Sizes
End fitting
Materials
Body
Stem
Plug
Seat
G6
G6...S
Stem packing
G6
G6S
Media temp. range
chilled or hot water,
60% glycol, steam
A-port equal percentage
linear
2½”, 3”, 4”, 5”, 6”
ANSI flanged
cast iron
stainless steel
brass
stainless steel
stainless steel
bronze trimmed: NLP (EPDM)
stainless trimmed: NLP (EPDM)
refer to valve specification
pages in the Product Guide and
Price List
Body pressure rating
G6, 125# ANSI flange 125 psi
G6, 250# ANSI flange 250 psi
Maximum inlet pressure
Water
150 psi (1034 kPa) G6C, G6CS
250 psi (1724 kPa) G6C...250,
G6CS...250
Steam
35 psi (241 kPa) G6C, G6C...250
100 psi (690 kPa) G6CS, G6CS...250
Maximum differential
pressure (ΔP)
Water
25 psi (172 kPa) G6C, G6C...250
50 psi (345 kPa) G6CS, G6CS...250
Steam
15 psi (103 kPa) G6C, G6C...250
Rangeability
85:1 (G665..), 91:1 (G680..)
98:1 (G6100..), 100:1 (G6125..)
98:1 (G6150..)
26
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
65
2-way Flanged
AVK Series
Inches
Suitable Actuators
Non-Spring
Return
AFX Series
Cv
DN
[mm]
EV Series
Valve Nominal Size
Control Valve Product Range
Globe Valve Product Range
Suitable Actuators
Cv
Inches
DN [mm]
3-Way Flanged
68
2½
65
68
2½
65
G765S
68
2½
65
G765-250
68
2½
65
G765S-250
Non-Spring
Return
Spring Return
Electronic
Fail-Safe
3
80
G780-250
85
3
80
G780S-250
190
4
100
G7100
190
4
100
G7100S
190
4
100
G7100-250
190
4
100
G7100S-250
280
5
125
G7125
280
5
125
G7125S
280
5
125
G7125-250
280
5
125
G7125S-250
340
6
150
G7150
340
6
150
G7150S
340
6
150
G7150-250
340
6
150
G7150S-250
68
2½
65
G765D
68
2½
65
G765DS
68
2½
65
G765DS-250
85
3
80
G780D
85
3
80
G780DS
85
3
80
G780DS-250
154
4
100
G7100D
154
4
100
G7100DS
154
4
100
G7100DS-250
195
5
125
G7125D
195
5
125
G7125DS
195
5
125
G7125DS-250
248
6
150
G7150D
248
6
150
G7150DS
248
6
150
G7150DS-250
AVK Series
85
Mode of Operation
The control valve is operated by an electronic actuator
that responds to a standard voltage for on/off control, a
modulating VDC/4…20 mA, or 3-point control system. The
actuator will then move the plug of the valve to the position
dictated by the control signal thus changing the flow.
GK Series
G780S
Product Features
Equal percentage (G6) and linear (G7) flow curve options
available for a wide variety of HVAC applications. Capable of
being used for heating, cooling, and steam service. Repack
and rebuild kits are available to extend the life of the valve
without full replacement.
Actuator Specifications
Control type
on/off, floating point, 2-10 VDC
multi-function technology (MFT)
Manual override
all models
Electrical connection
3 ft [1 m] cable with
½” conduit fitting
Valve Specifications
Service
AVK Series
G780
80
AFX Series
80
3
AFX Series
3
RV Series
85
85
EV / RV Series
G765
EV Series
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Valve Nominal Size
Flow characteristic
Sizes
End fitting
Materials
Body
Stem
Plug
Seat
G7
G7...S
Stem packing
G7
G7...S
Media temp. range
Body pressure rating
G7, 125# ANSI flange
G7, 250# ANSI flange
Maximum inlet pressure
Water
Maximum differential
pressure (ΔP)
Water
Rangeability
chilled or hot water,
60% glycol
linear
2½”, 3”, 4”, 5”, 6”
flanged
cast iron
stainless steel
brass
stainless steel
stainless steel
bronze trimmed: NLP (EPDM)
stainless trimmed: NLP (EPDM)
refer to valve specification
pages in the Product Guide and
Price List
125 psi
250 psi
150 psi (1034 kPa) G7, G7S
250 psi (1724 kPa) G7...250,
G7S...250
25 psi (172 kPa) G7, G7...250
50 psi (345 kPa) G7S, G7S...250
50:1
27
Control Valve Product Range
Resilient Seat Butterfly Valve Product Range
2-way
Suitable Actuators
Non-Spring
Return
Type
65
F665
302
116
3
80
F680
600
230
4
100
F6100
1022
392
5
125
F6125
1579
605
6
150
F6150
3136
1202
8
200
F6200
5340
2047
10
250
F6250
8250
3162
12
300
F6300
11917 4568
14
350
F6350
16388 6282
16
400
F6400
21705 8320
18
450
F6450
27908 10698
20
500
F6500
43116 16528 24
600
F6600
Mode of Operation
Butterfly valves are capable of handling higher flow rates
with relatively low pressure loss. These valves may be
used for isolation (shut-off) service or throttling service
within a range of 0-60 degrees. Pressure losses for valve
opening greater than 70 degrees are too low to produce any
significant effect on flow rate. Butterfly valves are controlled
with a maintenance-free electronic actuator or with a
manually ergonomic handle or gear operator.
Product Features
The unique disc and seat design ensures positive valve
seating while maintaining low seating torque.
3-way
Actuator Specifications
Control type
on/off, floating point,
modulating, 2-10 VDC,
multi-function technology (MFT)
Manual override
all models
Electrical connection
3 ft. [1 m] cable
terminal block
Suitable Actuators
Valve
Nominal Size
Type
Cv
90°
Cv
60°
IN
DN
[mm]
3-way
115
44
2
50
F750
196
75
2½
65
F765
302
116
3
80
F780
600
230
4
100
F7100
1022
392
5
125
F7125
1579
605
6
150
F7150
3136
1202
8
200
F7200
5340
2047
10
250
F7250
Non-Spring
Return
HDU
HD
HDU
HD
Spring
Return
HDU
HD
HDU
HD
Electronic
Fail-Safe
HDU
Valve Specifications
Service
HD
AF
GK
Sizes
End fitting
GK
SY Series
SY Series
AF Series
GM Series
GM Series
AM
AM
Flow characteristic
Materials
Body
Body finish
Disc
Shaft
Seat
O-rings
Bushings
Media temp. range
8250
3162
12
300
F7300
11917
4568
14
350
F7350
Body pressure rating
16388
6282
16
400
F7400
Close-off pressure
21705
8320
18
450
F7450
Rangeability
Maximum velocity
Leakage
28
chilled, hot water,
60% glycol
F6 modified equal percentage
F7 modified linear
2” to 24”
for ASME/ANSI Class 125/150
flanges
ductile iron ASTM A536
epoxy powder coat
304 stainless steel
416 stainless steel
EPDM
EPDM
RPTFE
-22°F to +250°F
[-30°C to +120°C]
consistent with ASME/ANSI
Class 125
HDU: 50 psi
HD: 200 psi, 2” to 12”
150 psi, 14” to 24”
10:1
12 FPS
0%
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
2½
GKR
75
DKR
196
HD
DKR
F650
AF Series
50
AF Series
2
SY Series
44
Electronic
Fail-Safe
HDU HD HDU HD HDU HD HDU HD HDU HD
SY Series
115
Spring
Return
GR Series
2-way
GR Series
DN
[mm]
AR
IN
DR
Cv
60°
AR
Cv
90°
DR
Valve
Nominal Size
Control Valve Product Range
Grooved Butterfly Valve Product Range
115
36
2
50
F650VIC
260
80
2½
65
F665VIC
440
140
3
80
F680VIC
820
250
4
100
F6100VIC
1200
370
5
125
F6125VIC
1800
560
6
150
F6150VIC
3400
1050
8
200
F6200VIC
5800
1800
10
250
F6250VIC
9000
2790
12
300
F6300VIC
Electronic
Fail-Safe
AF Series
2-way
SY Series
DN
[mm]
IN
Spring
Return
Non-Spring Return
DR Series
Type
GM Series
Cv
60°
Valve
Nominal Size
AM
Series
Cv
90°
Suitable Actuators
GK
2-way
Mode of Operation
Grooved butterfly valves are designed for body pressures
ranging from full vacuum to 300 psi and for bi-directional,
dead end services to full body pressure. The valve patented
seat design ensures full 360° sealing. The pressureenhanced seat compresses to form a larger seating area as
the pressure increases. Valve construction and performance
meet and exceed MSS-SP-67 requirements.
Product Features
The unique single offset disc and seat design ensures
positive valve seating while maintaining low seating torque.
Suitable Actuators
Cv
60°
IN
DN
[mm]
3-way
115
36
2
50
F750VIC
260
80
2½
65
F765VIC
440
140
3
80
F780VIC
820
250
4
100
F7100VIC
1200
370
5
125
F7125VIC
1800
560
6
150
F7150VIC
3400
1050
8
200
F7200VIC
5800
1800
10
250
F7250VIC
9000
2790
12
300
F7300VIC
AF
Cv
90°
Spring
Return
Non-Spring Return
Actuator Specifications
Control type
on/off, floating point,
modulating, 2-10 VDC,
multi-function technology (MFT)
Manual override
all models
Electrical connection
3 ft. [1 m] cable
terminal block
Valve Specifications
Service
Flow characteristic
SY Series
Type
AM
Valve
Nominal Size
GM
Series
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
3-way
Sizes
End fitting
Materials*
Body
Body finish
Disc
Shaft
Seat
Bearings
Media temp. range
Body pressure rating
Close-off pressure
Rangeability
Maximum velocity
Leakage
chilled, hot water,
60% glycol
F6 modified equal percentage
F7 modified linear
2” to 12”
grooved ANSI/AWWA (C606)
ductile iron ASTM A536,
grade 65-45-12
black alkyd enamel
electrolysis nickel coated
ductile iron
416 stainless steel
EPDM
fiberglass with TFE lining
-20°F to +250°F
[-30°C to +120°C]
300 psi
200 psi (for most combinations)
100:1
20 FPS
0%
*VIC® 300 Masterseal™ is manufactured by
Victaulic Company
29
Control Valve Product Range
High Performance Butterfly Valve Product Range
Suitable Actuators
2-way Valves
56
2
F650-150SHP
F650-300SHP
80
2½
F665-150SHP
F665-300SHP
228
125
3
F680-150SHP
F680-300SHP
451
248
4
F6100-150SHP
F6100-300SHP
714
392
5
F6125-150SHP
F6125-300SHP
1103
607
6
F6150-150SHP
F6150-300SHP
2064
1135
8
F6200-150SHP
F6200-300SHP
3517
1934
10
F6250-150SHP
F6250-300SHP
4837
2660
12
F6300-150SHP
F6300-300SHP
6857
3592
14
F6350-150SHP
F6350-300SHP
9287
4865
16
F6400-150SHP
F6400-300SHP
11400
6270
18
F6450-150SHP
F6450-300SHP
14420
7590
20
F6500-150SHP
F6500-300SHP
22050
11550
24
F6600-150SHP
F6600-300SHP
150
300
150
300
150
300
GK Series
Mode of Operation
High performance butterfly valves are designed for
modulating and isolation service and feature a machined
seat design and blow out proof solid shaft, providing
better torque consistency, which offers longer actuator
life and reduced risk of leakage. Available for a variety of
high temperature and pressure ratings i.e., ASME/ANSI
Class 300 or 150. Valve sizes range from 2 to 24 inches,
with rangeabilities of 100:1, 0% leakage ratings, and a
maximum valve velocity of 32 FPS.
Product Features
Unique body seat and double offset disc design ensures
positive valve sealing to help assure leak free performance
in water applications while maintaining low seating torque.
Note: Cv values listed for ANSI Class 150 Butterfly Valves. Please consult the technical documentation for ANSI Class 300 Cv values
and configurations.
3-way Valves
Suitable Actuators
Non-Spring Return
ANSI 300
3-way
100
52
2
F750-150SHP
F750-300SHP
143
75
2½
F765-150SHP
F765-300SHP
223
117
3
F780-150SHP
F780-300SHP
435
228
4
F7100-150SHP
F7100-300SHP
688
361
5
F7125-150SHP
F7125-300SHP
1041
546
6
F7150-150SHP
F7150-300SHP
1911
1001
8
F7200-150SHP
F7200-300SHP
3194
1673
10
F7250-150SHP
F7250-300SHP
4428
2319
12
F7300-150SHP
F7300-300SHP
5702
2986
14
F7350-150SHP
F7350-300SHP
8243
3988
16
F7400-150SHP
F7400-300SHP
9712
5088
18
F7450-150SHP
F7450-300SHP
10658
7590
20
F7500-150SHP
F7500-300SHP
16205
11550
24
F7600-150SHP
F7600-300SHP
300
150
300
150
300
Note: Cv values listed for ANSI Class 150 Butterfly Valves. Please consult the technical documentation for ANSI Class 300
Cv values and configurations.
30
Valve Specifications
Service
Flow characteristic
150
GK Series
ANSI 150
3-way
GK Series
Inches
Electronic
Fail-Safe
SY Series
Cv
60°
SY Series
Cv
90°
GM Series
Type
GM Series
Valve
Nominal
Size
Actuator Specifications
Control type
on/off, floating point,
modulating, 2-10 VDC,
multi-function technology
(MFT)
Manual override
all models
Electrical connection
3 ft. [1 m] cable
terminal block
Sizes
End fitting
Materials
Body
Disc
Shaft
Seat
Gland seal
Bearings
Media temp. range
Body pressure rating
Close-off pressure
Rangeability
Maximum velocity
Leakage
chilled or hot water,
60% glycol, steam to 50 psi
F6 modified equal percentage,
unidirectional
F7 modified linear,
unidirectional
2” to 24”
ASME/ANSI Class 150 or 300
carbon steel full lug
316 stainless steel
17-4 PH stainless
RTFE
TFE
glass backed PTFE
-20°F to +400°F
[-30°C to +204°C]
150 SHP: ASME/ANSI Class 150
300 SHP: ASME/ANSI Class 300
150: 285 psi, 300: 600 psi
100:1
32 FPS
0%
Double Dead End Service: Utilizes larger retainer ring set
screws to allow the valve to be placed at the end of the
line without a down stream flange in either flow direction
while still holding full pressure.
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
146
300
GK Series
102
150
AF Series
ANSI 300
2-way
AF Series
ANSI 150
2-way
Electronic
Fail-Safe
SY Series
Inches
SY Series
Cv
60°
Spring
Return
Non-Spring Return
GM Series
Cv
90°
Type
GM Series
Valve
Nominal
Size
Meters Product Range
Flow Meter Product Range
Valve Nominal Size
Type
Inches
DN [mm]
2-way
0.07 - 6.6
½
15
FM050
0.13 - 12.4
¾
20
FM075
0.23 - 21.8
1
25
FM100
0.36 - 34.2
1¼
32
FM125
NPT
GPM Range
0.49 - 47.5
1½
40
FM150
1.09 - 91.2
2
50
FM200
Mode of Operation
The ultrasonic flow meter is an accurate and repeatable liquid flow
measurement meter utilizing ultrasonic transit time technology.
The transducers perform as both emitter and receiver to provide
accurate signal reflection.
Product Features
The Belimo ultrasonic flow meters are designed for HVAC chilled
water, hot water, and water/glycol solutions from -4°F to +250°F
[-20°C to +120°C] up to 60% glycol. The flow meter incorporates
an embedded temperature sensor which enables Belimo’s
patented temperature and glycol compensation logic to accurately
read flow over a wide range of water variables.
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
Flow Meter Specifications
Service
chilled or hot water, up to 60% glycol
max, condenser water (open loop and
steam not allowed)
Sizes
End fitting
Materials
Sensor housing
Media temp range
Sensor housing
pressure rating
Flow sensor technology
Length to meet
specified measurement
accuracy
Inlet
Outlet
Output signal
0V
0.3V
0.5V
10V
Flow measurement
tolerance
Flow measurement
repeatability
Electrical connection
½”, ¾”, 1”, 1¼”, 1½”, 2”
NPT female inlet, NPT male outlet
forged brass, nickel plated
-4°F to +250°F [-20°C to +120°C]
360 psi
ultrasonic with glycol and
temperature compensation
5x nominal pipe size (NPS)
no requirement
analog (0-10 VDC)
sensor has no supply voltage
sensor has supply voltage but
is in error state
0% of V’nom
100% of V’nom
+ 2%
+ 0.5%
3 ft., 18 GA plenum cable
All flow accuracies are at 77°F (25°C).
31
Selection Guide
ZIP Economizer
AND
ECON-ZIP-BASE
TFB24-SR
up to 7.5 Tons
SINGLE DRY BULB
ECON-ZIP-10K
(Supply Air Sensor)
NFB24-SR
12-15 Tons
LF24-SR US
7.5-12 Tons
DIFFERENTIAL DRY BULB
AFB24-SR
15-30 Tons
SINGLE ENTHALPY
DIFFERENTIAL ENTHALPY
OR
ECON-ZIP-10K
• Demand Control Ventilation (DCV)* - ECON-ZIP-EM + CO2 sensor
of your choice (0-2000 PPM, 0-10 VDC).
• Remote Alarm Notification* - ECON-ZIP-COM
• Required for BACnet communication**
• Preoccupancy Purge* - ECON-ZIP-EM
Requires thermostat with purge setting and contacts.
* May be required by local codes
** Releasing Summer 2016
• Remote Damper Override - ECON-ZIP-EM + SGA24
BACnet® is a registered trademark of ASHRAE.
• Exhaust Fan - ECON-ZIP-EM
ZIP Packs - Packaged Solutions for Quick Drop-in Economizer Replacement
ECON-ZIP
ZIP Economizer Solution with
Energy Module
-SE
TF
High Limit Changeover Strategy (Temperature)
Actuator
SD = Single Dry Bulb
TF** = 22 in-lbs, 7.5 Tons***
DD = Differential Dry Bulb
LF** = 35 in-lbs, 12 Tons***
SE = Single Enthalpy
**With corresponding retrofit kit
***Recommended max RTU tonnage
DE = Differential Enthalpy
Pack Components may include:
ECON-ZIP-10K: 10K Sensor for Outside Temperature or Return Air
ECON-ZIP-LF1 or ECON-ZIP-TF1: Retrofit Kit for Actuator Replacement
ECON-ZIP-TH: Temperature and Humidity Sensor, Outside Air or Return Air
See product flyer for more details.
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
ECON-ZIP-TH
Retrofit Solutions for valve and damper actuators
increase the quality and reliability of your entire system.
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
The Source for HVAC and Valve Retrofit Solutions
Belimo has a dedicated retrofit team of professionals to provide you the guidance and
Replacement solutions are available
resources for getting the most from your HVAC system. If you are experiencing broken
for Siemens®, Johnson Controls®,
or outdated actuators, valves that are not performing or are causing unnecessary energy
Honeywell®, Invensys®, Robertshaw®,
consumption; Belimo‘s dedicated retrofit team can help.
Siebe, Barber Colman®, Landis®,
Powers®, Warren®, Apollo®, Bray®,
Belimo has a state-of-the-art in house CNC machine shop with the ability to fabricate
Centerline®, Challenger®, Chemtrol®,
custom linkages for valve automation. Product mediums include stainless steel, cold
Dezurik®, Flowseal®, FNW®, Gruvlok®,
rolled steel, or brass. With our machining capabilities and our retrofit team we can
Hammond®, Keystone®, K-LOK®,
design and create custom retrofit linkage solutions for your existing valves, regardless
Metraflex®, Milwaukee®, Mueller®,
of the manufacturer.
Nibco®, PDC®, Quartermaster®,
Belimo actuators and valves lead the industry in cutting-edge technology and value.
Victaulic®, Watts® and many more.
Whether electronic or pneumatic, there is a simple way to retrofit.
Tools from Belimo to Make Your Life Easier.
www.Belimo.us is one source for all your product needs.
•
•
SelectPro
Retrofit App
•
•
Energy Valve Savings Estimator
And more
G & O Thermal Supply
5435 N. Northwest Highway
Chicago, IL 60630
Phone: 773-763-1300
With branches in IL
Aireco Supply
9120 Washington Boulevard
Savage, MD 20763-0414
Phone: 301-953-8800
With branches in MD, VA
Industrial Controls Distributors, LLC
(was Climatic Control)
5061 W. State Street
Milwaukee, WI 53208
Phone: 800-242-1656
With branches in WI
Boston Aircontrols, Inc.
8 Blanchard Road
Burlington, MA 01803
Phone: 781-272-5800
Charles D. Jones Co.
445 Bryant Street, Unit #1
Denver, CO 80204-4800
Phone: 800-777-0910
With branches in CO, MO, KS
Cochrane Supply and Engineering, Inc.
30303 Stephenson Highway
Madison Heights, MI 48071-1633
Phone: 800-482-4894
With branches in MI and Maumee, OH
Industrial Controls Distributors, LLC
17 Christopher Way
Eatontown, NJ 07724
Phone:800-543-8200
With branches in GA, KY, IN, MA, ME,
NC, NY, OH, PA, TN
Temperature Control Systems
10315 Brockwood Road
Dallas, TX 75238
Phone: 214-343-1444
With branches in OK, TX
Interstate HVAC Controls
30 Vineland Street
Brighton, MA 02135
Phone: 617-782-9000
T.F. Campbell Company
1203 Edgebrook Avenue
Pittsburgh, PA 15226
Phone: 412-881-8006
Jackson Controls
1708 E. 10th Street
Indianapolis, IN 46201
Phone: 317-231-2200
Tower Equipment Co., Inc.
1320 West Broad Street
Stratford, CT 06615
Phone: 800-346-4647
M & M Controls
9E West Aylesbury Road
Timonium, MD 21093
Phone: 410-252-1221
With branches in VA
MICONTROLS, Inc.
6516 5th Place South
Seattle, WA 98124
Phone: 800-877-8026
With branches in WA, OR
Columbus Temperature Control
1053 E. 5th Avenue
Columbus, OH 43201
Phone: 800-837-1837
Meier Supply
123 Brown Street
Johnson City, NY 13790
Phone: 607-797-7700
With branches in NY, PA
Controlco
985 3rd Street
Oakland, CA 94607
Phone: 510-636-7900
With branches in CA, NV, TN
Minvalco, Inc.
3340 Gorham Avenue
Minneapolis, MN 55426-4267
Phone: 952-920-0131
With branches in MN
Control Products
9101 Jameel, Suite 130
Houston, TX 77447
Phone: 713-849-7200
With a branch in San Antonio, TX
Relevant Solutions
12610 West Airport Blvd, Suite 100
Sugarland, TX 77478
Phone: 281-295-8850
Engineered Control Systems
5627 NW 74th Avenue
Miami, FL 33166
Phone: 305-885-8804
With branches in FL
Stromquist and Company
4620 Atlanta Road
Smyrna, GA 30080
Phone: 404-794-3440
With a branch in Orlando, FL
RSD / Refrigeration Supplies Distributor
26021 Atlantic Ocean Drive
Lake Forest, CA 92630
Phone: 949-380-7878
With branches in CA, NV, OR, AK, AZ,
ID, UT, WA, MT
Twinco Supply Corporation
55 Craven Street
Huntington Station, NY 11746-2143
Phone: 800-794-3188
With branches in NY
CANADA
Relevant Solutions
(was Applied Automation)
3186 South Washington Street, #230
Salt Lake City, UT 84115
Phone: 801-486-6454
With branches in CA, CO, TX
South Side Control Supply, Co.
488 N. Milwaukee Avenue
Chicago, IL 60610-3923
Phone: 312-226-4900
With branches in IL, IN
For a complete list of distributors
in Canada, please visit our
website: www.belimo.ca
or call toll free: 866-805-7089
BRAZIL
Amcon Controls, Inc.
11906 Warfield Street
San Antonio,TX 78216
Phone: 210-349-6161
Houston, TX branch 713-464-7002
Mandeville, LA branch 985-624-3303
Saint Louis Boiler Supply, Co.
617 Hanley Industrial Court
St. Louis, MO 63144
Phone: 314-962-9242
For a complete list of distributors
in Brazil, please visit our
website: www.belimo.com.br
or call: 55 11 3643-5656
For a complete list of distributors
in Latin America and the Caribbean,
please visit our website: www.belimo.us
or call: 203-791-8396
Belimo Americas
USA, Latin America, and the Caribbean: www.belimo.us
Canada: www.belimo.ca
Brazil: www.belimo.com.br
Belimo Worldwide: www.belimo.com
®
S_10001 - 04/16 - Subject to change. © Belimo Aircontrols (USA), Inc.
ACR Supply Company Inc.
4040 S. Alston Avenue
Durham, NC 27713
Phone: 919-765-8081
With branches in NC
LATIN AMERICA &
THE CARIBBEAN
USA
Belimo Americas Platinum Distributors
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement