TYPICAL SPECIFICATIONS FEATURES

TYPICAL SPECIFICATIONS FEATURES
Type:
Project/Location:
Contractor:
Prepared By:
LA Series
Date:
Model No.:
Extruded Aluminum Exit Sign
FEATURES
TYPICAL SPECIFICATIONS
•Durable extruded, one-piece aluminum housing and face plates
•White LED light source
•Supplied standard with two pictogram films per face, for direction selection
•Listed CSA 22.2 No.141-10
•Universal AC input: two-wire 120 to 347VAC; standard DC input: two-
Supply and install the Lumacell® LA Series pictogram Exit Signs. The
equipment shall operate with universal 2-wire AC input voltage of 120 to
347VAC at less than 2.5W and universal 2-wire DC input voltage from 6 to
24VDC at less than 1.5W for single and double face signs. The equipment shall
be suitable for wall, end, or ceiling mount. The housing shall be constructed
of rugged extruded aluminum and have a maximum depth of 2-1/2”. The
faceplate(s) shall be constructed of extruded Aluminum and shall incorporate
a protective clear poly-carbonate panel. Each face plate shall come standard
with two legend films for pictogram and direction selection. The light source
shall be white light-emitting diodes (LED) and shall provide even illumination in
normal and emergency operation. The pictogram Exit Sign in a Self-Powered
configuration shall use a sealed Nickel-Cadmium battery of 2.4V nominal
voltage and shall stay illuminated during emergency operation for at least two
hours upon AC failure.
The pictogram Exit Sign shall the CSA 22.2 No.141-10.
The equipment shall be Lumacell® Model:
.
wire 6 to 24VDC
•Energy efficient – consumes less than 2.5W in AC or DC-remote mode
•Self-Powered model gives standard two hours of back-up lighting
•Universal mounting – end, wall or ceiling
•Easy access to wiring entry for all mounting options
•Comes standard with the Lumacell® EZ2 canopy for quick and
easy installation
WIRE GUARDS
460.0079-L
DIMENSIONS
Wall mount
460.0027-L
End mount
460.0028-L
Ceiling mount
Dimensions are approximate and subject to change.
PICTOGRAM
STRAIGHT FROM HERE
73/4” [19.7 cm]
63/8” [16.2 cm]
< PICTOGRAM
LEFT FROM HERE
83/4” [22.3 cm]
43/4” [11.9 cm]
131/8” [33.3 cm]
141/8” [35.9 cm]
PICTOGRAM >
RIGHT FROM HERE
21/2” [6.3 cm]
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC-only
120 to 347VAC
Less than 2.5 W
-
-
AC/DC standard
120 to 347VAC
Less than 2.5 W
6 to 24VDC
Less than 1.5 W
Less than 2.5 W
AC/Special DC
120 to 347VAC
Less than 2.5 W
36, 48, 120VDC
Two-wire 120V AC/DC
120VAC
Less than 2.5 W
120VDC
Less than 2.5 W
Self-Powered
120 to 347VAC
Less than 3 W
Nickel-Cadmium battery
Minimum two hours
ORDERING INFORMATION
SERIES
FACES / MOUNTING
COLOURS
LA= aluminum
exit Sign
1= s ingle face universal
mounting
2= double face universal
mounting
3= u niversal face, universal
mounting
A= aluminum brushed
B= black
G= grey
W= factory white
Other colours available
EXAMPLE: LS2BUTP
VOLTAGE
OPTIONS
U= 120 to 347VAC; 6 to 24VDC
S= 120 to 347VAC; Self-Powered/2 hours
U00= 120 to 347VAC only
U36= 120 to 347VAC; 36VDC
U48= 120 to 347VAC; 48VDC
U120= 120 to 347VAC; 120VDC
2120= 2-wire 120VAC/VDC
ATN= self-powered diagnostic NiCad, 120/347VAC
NEX= NEXUS® system interface*
NEXRF= wireless NEXUS® system interface*
TP= tamper proof screws*
VR= vandal-resistant shield and
tamper proof screws*
*N
ot all options are available with NEXUS® system. Please consult your sales
representative.
*990.0119-L= tampler-proof bit (sold
separateley)
*O
ption VR not available on universal
face
Unlike Exit Signs this pictogram sign is not available in double arrow configuration.
www.lumacell.com
31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement