Vodafone | 547 | User manual | Vodafone 547 User manual

Vodafone 547 User manual
Vodafone 547
Mobile Phone
User Manual
Copyright © 2010 ZTE CORPORATION.
All Rights Reserved
Your Vodafone 547 is made exclusively for Vodafone by ZTE CORPORATION.
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of ZTE CORPORATION.
VODAFONE and the Vodafone logos are trademarks of the Vodafone Group.
The information in this manual is subject to change without notice. Every effort has been
made in the preparation of this manual to ensure accuracy of the contents, but all statements,
information, and recommendations in this manual do not constitute a warranty of any kind,
expressed or implied. Please read the Product Safety Information carefully to ensure the
correct and safe use of your mobile phone.
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Website: http://www.zte.com.cn
Table of Contents
........................................................ 4
YOUR PHONE .............................. 15
YOUR PHONE .............................. 16
INTERFACE ICONS ..................... 17
INPUT TEXT ................................. 17
ADJUST THE VOLUME ............... 18
BATTERY...................................... 19
...................................................... 22
PHONEBOOK............................... 23
...................................................... 25
CALLS ...........................................26
PROFILES .....................................30
SETTINGS .....................................31
ORGANISER .................................35
MY FILES ......................................36
GAMES&APPS .............................36
CAMERA .......................................39
MEDIA ...........................................41
Product Safety Information
The clauses set out below are a collation of terms that may apply to various products. Working
with the product manufacturer, using the process set out above, the appropriate set of clauses
should be selected. Please ensure that references to ”wireless device”, “device” or “phone”
below are tailored to the product in question.
Read the Safety Information section of
this user guide on page 7
Do not use while re-fuelling
Do not use hand-held while driving
This device may produce a bright or
flashing light
For body-worn operation maintain a
separation of 1.5 cm
Do not dispose of in a fire
Small parts may cause a choking hazard
Avoid contact with magnetic media
This device may produce a loud sound
Avoid Extreme Temperatures
Keep away from pacemakers and other
personal medical devices
Avoid contact with liquid, keep dry
Switch off when instructed in hospitals
and medical facilities
Do not try and disassemble
Switch off when instructed in aircrafts
and airports
Do not rely on this device for
emergency communications
Switch off in explosive environments
Only use approved accessories
RF Exposure
Your phone contains a transmitter and a receiver. When it is ON, it receives and transmits RF
energy. When you communicate with your phone, the system handling your call controls
the power level at which your phone transmits.
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits
for exposure to radio waves recommended by international guidelines. These guidelines were
developed by the independent scientific organisation ICNIRP and include safety margins
designed to assure the protection of all persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when
tested at the ear was 0.651 W/kg*. As mobile devices offer a range of functions, they can be
used in other positions, such as on the body as described in this user guide.
As SAR is measured utilising the device’s highest transmitting power, the actual SAR of this
device while operating is typically below that indicated above. This is due to automatic
changes to the power level of the device to ensure it only uses the minimum power required
to communicate with the network.
• The tests are carried out in accordance with [CENELEC EN50360] [IEC standard PT62209-1].
• Please see page 7 about body worn operation.
Body worn operation
Important safety information regarding radiofrequency radiation (RF) exposure.
To ensure compliance with RF exposure guidelines the phone must be used with a minimum
of 1.5 cm separation from the body.
Failure to observe these instructions could result in your RF exposure exceeding the relevant
guideline limits
Limiting exposure to radio frequency (RF) fields
For individuals concerned about limiting their exposure to RF fields, the World Health
Organisation (WHO) provides the following advice:
Precautionary measures: Present scientific information does not indicate the need for any
special precautions for the use of mobile phones. If individuals are concerned, they might
choose to limit their own or their children’s RF exposure by limiting the length of calls, or
using ‘hands-free’ devices to keep mobile phones away from the head and body.
Further information on this subject can be obtained from the WHO home page
http://www.who.int/peh-emf WHO Fact sheet 193: June 2000.
Full attention must be given to driving at all times in order to reduce the risk of an accident.
Using a phone while driving (even with a hands free kit) causes distraction and can lead to an
accident. You must comply with local laws and regulations restricting the use of wireless
devices while driving.
Operating machinery
Full attention must be given to operating the machinery in order to reduce the risk of an
Product Handling
You alone are responsible for how you use your phone and any consequences of its use.
You must always switch off your phone wherever the use of a phone is prohibited. Use of
your phone is subject to safety measures designed to protect users and their environment.
• Always treat your phone and its accessories with care and keep it in a clean and dust-free place.
• Do not expose your phone or its accessories to open flames or lit tobacco products.
• Do not expose your phone or its accessories to liquid, moisture or high humidity.
• Do not drop, throw or try to bend your phone or its accessories.
• Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its
• Do not paint your phone or its accessories.
• Do not attempt to disassemble your phone or its accessories, only authorised personnel
must do so.
• Do not expose your phone or its accessories to extreme temperatures.
• Please check local regulations for disposal of electronic products.Do not carry your phone
in your back pocket as it could break when you sit down.
Small Children
Do not leave your phone and its accessories within the reach of small children or allow them
to play with it.
They could hurt themselves or others, or could accidentally damage the phone.
Your phone contains small parts with sharp edges that may cause an injury or which could
become detached and create a choking hazard.
To avoid the risk of demagnetisation, do not allow electronic devices or magnetic media
close to your phone for a long time.
Electrostatic discharge (ESD)
Do not touch the SIM card’s metal connectors.
Power supply
Do not connect your device to the power supply or switch it on until instructed to do so in
the installation instructions.
Do not touch the antenna unnecessarily.
Normal use position
When placing or receiving a phone call, hold your phone to your ear, with the bottom towards
your mouth or as you would a fixed line phone.
Air Bags
Do not place a phone in the area over an air bag or in the air bag deployment area.
Store the phone safely before driving your vehicle.
This phone is capable of producing bright flashing lights.
Repetitive Motion Injuries
To minimise the risk of RSI, when Texting or playing games with your phone:
• Do not grip the phone too tightly.
• Press the buttons lightly.
Make use of the special features in the handset which minimise the number of buttons
which have to be pressed, such as message templates and predictive text.
Take lots of breaks to stretch and relax.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, which cannot guarantee
connection in all conditions. Therefore, you must never rely solely on any wireless phone for
emergency communications.
Loud Noise
This phone is capable of producing loud noises which may damage your hearing.
MP3 and video player function
When listening to pre-recorded music or watching videos on your device, with headphones
or earphones at high volumes, you run the risk of permanent damage to your hearing. Even
if you are used to listening to music at a high volume and it seems acceptable to you, you
still risk damaging your hearing. Reduce the sound volume to a reasonable level and avoid
using headphones for an excessive period of time to avoid hearing damage.
Different headphones, earphones or ear buds may deliver a higher or lower volume, at the
same volume setting on your device. Always start at a low volume setting.
Do not listen to music or video with headphones while driving.
Bright Light
This phone is capable of producing flash of light or use as a torch, do not use it too close to the eyes.
Phone Heating
Your phone may become warm during charging and during normal use.
Use only approved accessories.
Do not connect with incompatible products or accessories.
Take care not to touch or allow metal objects, such as coins or key rings, to contact or
short-circuit the battery terminals.
Connection to a Car
Seek professional advice when connecting a phone interface to the vehicle electrical system.
Faulty and Damaged Products
Do not attempt to disassemble the phone or its accessory.
Only qualified personnel must service or repair the phone or its accessory.
If your phone or its accessory has been submerged in water, punctured, or subjected to a
severe fall, do not use it until you have taken it to be checked at an authorised service centre.
Battery Handling & Safety
Always switch the device off and disconnect the charger before removing the battery.
Only use the battery and charger supplied, or manufacturer approved replacements intended
for use with your phone. Using other batteries and chargers could be dangerous.
Do not disassemble or short-circuit the battery. Accidental short-circuiting can occur if a
metallic object such as a key, paper clip, or pen touches the terminals of the battery.
Improper battery use may result in a fire, explosion, or other hazard. If you believe the battery
has been damaged, do not use it, take it to a service centre for testing.
Care must be taken when using the phone in close proximity to personal medical devices,
such as pacemakers and hearing aids.
Pacemaker manufacturers recommend that a minimum separation of 15 cm be maintained
between a mobile phone and a pacemaker to avoid potential interference with the pacemaker.
To achieve this use the phone on the opposite ear to your pacemaker and do not carry it in a
breast pocket.
Hearing Aids
People with hearing aids or other cochlear implants may experience interfering noises when
using wireless devices or when one is nearby.
The level of interference will depend on the type of hearing device and the distance from
the interference source, increasing the separation between them may reduce the interference.
You may also consult your hearing aid manufacturer to discuss alternatives.
Medical devices
Please consult your doctor and the device manufacturer to determine if operation of your
phone may interfere with the operation of your medical device.
Switch off your wireless device when requested to do so in hospitals, clinics or health care
facilities. These requests are designed to prevent possible interference with sensitive medical
Switch off your wireless device whenever you are instructed to do so by airport or airline staff.
Consult the airline staff about the use of wireless devices on board the aircraft, if your device
offers a ‘flight mode’ this must be enabled prior to boarding an aircraft.
Interference in cars
Please note that because of possible interference to electronic equipment, some vehicle
manufacturers forbid the use of mobile phones in their vehicles unless a handsfree kit with
an external antenna is included in the installation.
Petrol stations and explosive atmospheres
In locations with potentially explosive atmospheres, obey all posted signs to turn off wireless
devices such as your phone or other radio equipment.
Areas with potentially explosive atmospheres include fuelling areas, below decks on boats,
fuel or chemical transfer or storage facilities, areas where the air contains chemicals or
particles, such as grain, dust, or metal powders.
Blasting Caps and Areas
Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn
off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.
Your Phone
Power key
Status bar
Volume keys
Touch screen
Camera key
Send key
End key
USB connector
Turn On / Off or wake up your phone
Hold the Power key to turn your phone on or off.
In Menu→Settings→Phone settings→Misc. settings→LCD backlight, set the LCD
backlight time. If the phone is not operated within this time, the screen will turn black.
Press the any key to wake up your phone.
Lock / unlock the keypad
In Menu→Settings→Security settings→Auto keypad lock, set the auto keypad lock
time. If the phone is not operated within this time, the keypad will be locked. Or you can
press the Power key to lock the screen in the standby mode.
To unlock the keypad, follow the onscreen instruction to pull the card down.
Note: In this User Manual, “press a key” means to press the key and release it, while “hold a
key” means to press the key for at least two seconds and then release it. Locking the keypad
can prevent unintentional operations on it. You can answer an incoming call with the regular
operation when the keypad is locked.
Use the Touchscreen
Your phone supports touch screen functionality.
• Slide up or down with your finger on the screen to move the highlight bar.
• Tap any application to open it.
Interface icons
What it means
What it means
Signal strength
New SMS, message box full when blinking
New voicemail
Missed call
MMS downloading
Call diverting
Battery status
Alarm clock set
Input Text
You can use the onscreen keyboard to enter text messages, contact information, notes, and more.
1. Tap a text field, such as in a note or new contact, to bring up the keyboard.
2. Tap keys on the keyboard.
As you type, each letter appears above the keyboard.
• Change input mode: Tap the # button to change the input mode (input modes: eZi ABC,
eZi abc, ABC, abc and 123 ).
• Input Letters: In ABC/abc mode, tap the corresponding letter key till the letter appears.
• Input Words: In eZi ABC/eZi abc mode, input any letter with a single button tap. Tap each
button only once for every letter. The word changes after each button stroke. Predictive
text input is based on a built-in dictionary. When you have finished writing the word and it
is correct, confirm it by tapping the character string.
• Input Digits: In 123 mode, tap the digit button once to input a digit. In eZi ABC/eZi abc
mode, tap the digit button, and select the number.
• Input Symbol: Tap the * botton to enter the symbol mode. In symbol mode select the
required symbol by tapping once. In eZi ABC/eZi abc mode, tap the 1 button, and select
the required symbol (common symbols).
• Input Space: Tap the space button to input a space.
• Delete Character: Tap the back button to clear a character.
• Move Cursor : Among the text, tap in the position you want to move.
Adjust the Volume
When you’re on the phone or listening to songs, movies, or other media, the Volume keys on
the left side of your phone adjust the audio volume.
Otherwise, the keys control the volume for the ringer, and other sound effects.
The lithium ion battery of the mobile phone can be immediately used after unpacking.
Installing the battery
1. Pull the battery cover from the notch on the bottom right edge and remove the cover.
2. Insert the battery by aligning the gold-coloured contacts with the contacts in the battery
3. Push down the upper section of the battery until it clicks into place.
4. Replace the battery cover and close it gently until you hear a click.
Removing the battery
1. Make sure that your mobile phone is switched off.
2. Remove the battery cover.
3. Pull the battery up and remove it from the mobile phone.
Charging the battery
Your phone is powered by a rechargeable battery. For maximum battery performance,
it is recommended that you first use up the battery power and then charge it completely. A new
battery’s full performance is achieved only after three complete charge and discharge cycles.
• Connect your travel adapter to the side of your mobile phone as shown in the diagram.
Note: The side with arrow should be facing downwards while connecting.
Connect the other end of the travel adapter to the mains socket.
When you charge the battery, the battery charging indicator appears.
When the battery is fully charged, disconnect the charger.
Inserting the SIM card
You want a mobile phone that is sophisticated yet easy to use and here it is in your hands!
Naturally you are eager to start using it, but first you need to insert the SIM card.
Insert the SIM card as follows:
Make sure that the phone is switched off and the charger is disconnected from the phone.
• Turn the phone over and remove the battery cover.
• Remove the battery if it is already installed.
• Hold your SIM card with the cut corner oriented as shown and then slide it into the card
holder with the gold-coloured contacts facing downward.
Replace the battery first.
Replace the battery cover.
Every mobile phone has a SIM card (Subscriber Identity Module). This is a micro-chip
that holds your personal information such as names and phone numbers. Your phone won’t
work without it. If you already have contacts on your SIM card, they can be transferred in
most cases.
Inserting the Memory Card
You can use a Memory card to expand the storage of the phone. You can store or copy files
such as videos, photos, music, and so on.
Do not take out the card or switch off the phone while transmitting or storing data, which
may cause data loss or damage to the phone or the card.
Insert the Memory card as follows:
The Memory card slot is on the side of the SIM card holder. Insert the card with the metal
contacts facing down until it clicks to the right position.
There are some numbers that you may want to call again and again, so it makes sense to add
these numbers to your Phonebook. You can then access these numbers quickly and easily.
• Add new contact
Go to Menu→ Phonebook→ Add new contact. (Select a storage location if you have
selected Both in Preferred storage.) Edit the information and select Done, and then
select Yes to save.
Save number to Phonebook
You can also save a number right after you’ve made or received a phone call or a text
message from someone who is not yet in your Phonebook list.
Quick search
To quickly search for the contacts, enter the first letter of your desired contact on the screen.
Delete one record
To delete someone from your Phonebook list, first select the name, then select
Copy or move records
You can copy or move the records to SIM or to phone. You can also copy the records to
file. Select Options→Copy or Move.
Mark several records
Select Options→Mark several and then select the records you want to mark. It supports
“Send message”, “Delete marked” and so on.
Set preferred storage
Select Options→Phonebook settings→Preferred storage and then select SIM, Phone
or Both.
View memory status
Select Options→Phonebook settings→Memory status to check the memory status
of both phone and SIM.
Making and receiving calls
Basic way to make a call
In the standby mode select Dialer icon. Tap the numeric buttons to input the number and
press the Send key to dial.
Dial from the Phonebook
Go to Menu→Phonebook. Find the name of the person you want to call, and press the
Send key.
Make an emergency call
You can make emergency calls without the SIM card inserted so long as you are in an
area with network coverage.
Answer a call
Press the Send key.
End a call
Press the End key.
Use call options
During a call, you can select Options to enter the call options.
You can use the speakerphone by tapping the H-Free button.
You can put a call on hold, make a new call, and use applications such as Messaging &
Phonebook while you’re on a call.
Dialed calls, Received calls and Missed calls are saved in Call History. If the records are full,
the earliest saved records will be deleted. Select Options to enter the submenu:
• View: View your call record details.
• Call: Call the record again.
• Send message: Send a message to the record.
• Save to Phonebook: Save the current number to Phonebook.
• Edit before call: Edit the number before you call.
• Delete: Delete the current call record.
• Delete all: Delete all your call records.
• Advanced options include:
‹ Call timers: Check the time of call records.
‹ Call cost: Set Price per unit, and you can view the call cost.
‹ Text message counter: View the text messages you sent and received.
‹ GPRS counter: View the GPRS data amount you sent and received.
Sending and receiving messages
Write a new message
You can use your mobile phone to send and receive messages.
1. Go to Menu→Messaging→Write message.
2. Write your message. For more information on input method, see section ‘Input text’.
The default message type is SMS.
3. If you want to change to MMS, you can press Options and choose Switch to MMS;
or you can press Options and choose Add picture, Add sound, Add video or Add
subject to directly insert multimedia contents to the message and it will be switched
to MMS automatically.
4. You can select Options→Slide options to add a new slide.
5. When you finish writing, press Options→Send to to enter recipient or add from
Phonebook. If you are writing an MMS, after adding recipients, then you can select
Options→Change to Cc or Change to Bcc to change the current contact to Cc or
6. Select Options→Send to send the message out. If you want to save the MMS as a
draft, select Options→Save to Drafts. If you are writing a SMS,select Options→Save.
View messages
Upon receiving a message, the mobile phone will alert you with a ringtone, prompt, or a
new message icon.
1. Press View to open the Inbox. You can also go to Inbox through the main menu to
read the message.
2. While the message is open, use Options to reply, delete, or forward the message.
You can also call back the sender.
You can view the message boxes in the Messaging interface.
♦ Select Inbox to view received messages.
♦ Select Drafts to view unsent messages.
♦ Select Outbox to view unsuccessfully sent and saved messages.
♦ Select Sent messages to view successfully sent and saved messages.
♦ Select Archive to view archive messages.
♦ Select Templates to view message templates.
Messages settings
Go to Menu→Messaging→Message settings→Text message.
♦ Profile settings: This is automatically set by the service provider, but please contact
us if this is not available.
♦ Common settings: You can set Delivery Report and Reply path on or off. You can
select Save sent message or not.
♦ Memory status: View the SIM or Phone memory status.
♦ Preferred storage: Set the preferred storage to SIM or Phone.
♦ Preferred connection: Set the preferred connection to GPRS or GSM or GSM only.
Go to Menu→Messaging→Message settings→Multimedia message.
♦ Profiles: You can activate the VF DE MMS profiles or add new ones.
♦ Common settings: In Compose, you can set Slide time, Creation mode, Picture resizing,
Auto signature and Signature In Sending, you can set Validity period, Delivery report,
Read report, Priority, Delivery time, Hide sender and Send and save. In Retrieval, you
can set Home network, Roaming, Filters, Read report, Delivery report. In Memory
status, you can view memory status.
Sending and receiving email
Set up accounts
First you have to setup your email accounts. If the account is not properly set or activated,
you cannot send or receive any emails.
Go to Menu→Email→Email accounts.
1. Select Options→Activate Vodafone E-M@il or select New account.
2. Enter your email address, protocol, data account, and server information, etc.
3. Activate your email account.
Send an email
Go to Menu→Email→Write Email to edit your email. When you finish writing, select to
send and/or save the email.
Send and receive emails
If you want to receive emails, go to Menu→Email. Select Send and receive, and the
emails in your mailbox will be downloaded to your phone and the emails in the Outbox
will be sent out. Go to Inbox to view your received emails.
Go to Menu→Profiles. You can select your preferred profile in this menu. The profile options are:
Normal, Meeting, Outdoor, Silent, Headset and Bluetooth. The default settings for each individual
profile are preset at the factory. You can change them in the Options-Customize menu.
• Tone settings: Set the tone for various conditions.
• Volume: Set the Ringtone and Key tone.
• Alert type: Choose among four modes based on ring and vibration.
• Extra tone: Let the phone alert when warning or error.
Note: The Headset mode can only be activated with the headset connected.
You can adjust various settings of your phone. Go to Menu→Settings.
• Phone settings
♦ Time and date: You can set home city, time and date, and format.
♦ Schedule power on/off: Set auto power on and off time.
♦ Language: You can set the language.
♦ Pref. Input methods: You can set the preferred input method.
♦ Display: You can set Wallpaper, Power on display, Power off display and Virtual Keyboard
♦ Greeting text: You can set the greeting text.
♦ Flight mode: You can select to use flight mode. In flight mode, all wireless functions
are disabled.
♦ Misc. settings: You can set the LCD backlight brightness and time.
• Call settings
♦ Caller ID: You can select to Set by network, Hide ID or Send ID. Please contact your
network provider for details.
♦ Call waiting: After this function is activated, the system will inform you if there is
another incoming call. Please contact your network provider for details.
♦ Call divert: The call divert service enables you to divert an incoming call from a
service to a specified telephone number in preset conditions. You can contact the
network provider to activate this service. You can set the call divert service so that
voice calls and data calls are diverted to a preset number under different conditions.
♦ Call barring: You can bar outgoing and incoming calls. Please contact your network
provider for details.
♦ Line switching: Switch the call line.
♦ Closed user group: You can create groups and numbers in one group can call each
other, but can not call numbers in other groups.
♦ Advance settings: You can set Auto redial, IP dial, Call time display, Call time reminder
and Auto quick end.
Network settings
In this menu, you can select Automatic/Manual to select the network service provider
according to requests. If you have selected a service provider manually, you have to
manually select again or return to the Automatic option to select the service provider
when you switch to the SIM card of another network.
The GPRS connection can be set to When Needed or Always.
Security settings
♦ SIM lock: If SIM Lock is currently set Off, select it again then input a PIN code to turn
it on. You need to input the correct PIN code to unlock your SIM card when you turn
on your mobile phone next time.
Note: The PUK code is required to unlock the SIM card if you have incorrectly input
the PIN code for three consecutive times. The PIN code and the PUK code may be
supplied along with the SIM card. If not, contact the network provider.
♦ Phone lock: Phone lock can prevent your mobile phone from unauthorized use.
Select On/Off to enable or disable the handset lock protection.
♦ Auto keypad lock: Select a time for auto keypad lock, and the phone will automatically
lock the keypad to prevent unintended touch.
♦ Fixed dial: If your SIM card supports this function and this function is enabled, the
phone can only dial those numbers starting with the fixed dial number you set. For
example, if you set the fixed dial number to 139, then the phone can only dial numbers
starting with 139.
♦ Barred dial: You can edit the barred dial list and set the bar mode. Please consult the
network provider for this function.
♦ Change password: You can change the PIN, PIN2 and phone password here.
♦ Certificate manager: View the list of certificates.
Note: You may be required to input the phone lock code in some of the security
settings interfaces. The default lock code is 1122. Go to Security settings→Change
password→Phone password to change the phone lock code.
♦ Bluetooth: See chapter “Bluetooth”.
♦ Conn. Management: You can view your GPRS connectivity actions.
♦ Data account: You can add and view your GSM data and GPRS usage.
If you feel that the contact point of your touch screen is not accurately positioned, you
can fix it by this function.
Complete the calibration operation according to the system prompts. Tap the centre of
the cross until the calibration is completed.
Restore factory settings
You need to input the correct phone lock password, and press OK to restore factory
Your phone supports Wireless Application Protocol (WAP). You can get access to this
service through your network provider. WAP lets you get information about news, weather
forecasts and more.
Licence manager
♦ Licence list: Display the list of Licences.
♦ Status: Check the version and time.
♦ Advance: Select Sweep to remove useless licences and reboot your phone.
Vodafone toolkit
SIM card Toolkit (STK) services are value-added services provided by your network provider.
Your mobile phone supports STK service, but if your SIM card and network provider do
not support the service, these functions can’t be used.
Enter Calendar, the calendar of the current month will be displayed on the screen and
the current date will be marked by a background box in a special colour.
You can click the dates, browse the dates, and click the direction arrows on the screen to
switch the year and month; the information on the screen will also change consequently.
You can add tasks in this: Set Date, Call and Anniversary tasks.
You can view, and edit the alarm clocks settings. You can also enable or disable the
alarms. By taping Edit, you can set the corresponding features of the alarm according
to instructions: Repeat , Time, Alarm tone, Snooze, etc.
World clock
You can view the time in different cities.
You can perform simple calculations. You can add, subtract, multiply or divide, and select
M+, M-, MR, and MC to perform relevant operations.
Note: This calculator has limited accuracy and rounding errors may occur especially in
long division.
Currency converter
Your mobile phone provides you with basic functions of currency conversion. Input the
Rate, select OK and input a figure in the Local field, and then press OK to get the result.
My Files
You can check all the folders in the phone, create new ones, rename, delete or sort by, etc. The
files you download from the internet will be stored in these folders.
Note: When you select Format, the data will be lost, so please be careful with this function.
Go to Menu→Games&Apps. Your mobile phone has classic games and applications
• Java
MIDlets are Java™-based applications that can run on your phones. It supports
Java 2 Edition, J2ME™. Java allows you to download Java-based applications,
such as games and tools that are specifically designed for mobile phones. Java
gives you the flexibility of installing and managing additional J2ME applications
from the Internet.
You can select Download Applications or Download Games to search for more
applications or games online.
And you can select Manage Certificate Authorities to check Service Provider.
Opera is a Web Browser, go to Menu→Games&Apps→Internet to open it.
Your mobile phone has three games pre-loaded such as Brick Breaker Revolution 2
Trial, Mini Golf 99 Holes: Theme Park Trial and Guitar Hero 5 Mobile Trial.
Go to Menu→Web. Use Opera to view web pages.
Go to Menu→Settings→Connectivity→Bluetooth. The Bluetooth devices must be paired
before the communication is performed.
Turn on or off the Bluetooth on your phone
Go to Power, you can turn on or off Bluetooth.
Make your phone visible
Go to Bluetooth→Settings→Visibility, you can choose to be visible or not.
When your phone is visible, and the Bluetooth is turned on, all other Bluetooth-enabled
devices within range can detect your phone.
Create a Bluetooth partnership
1. Go to Bluetooth→My device→Search new device to search other
Bluetooth-enabled devices and list them.
2. Select the desired device name in the list and press Pair.
3. Enter a passcode (1 up to 16 characters), and then press OK. When the
opposite party enters the same passcode, the connection will be established.
Beam information using Bluetooth
After the Bluetooth partnership is established, you can beam information, such as contacts,
and calendar items, as well as files from your phone to another Bluetooth-enabled device.
For example, if you want to send an item from the Phonebook list to the opposite party, find
that item, press Options→Send contact→Via Bluetooth, and then select the device
name. If you want to send a multimedia file, find the file from the Media Album and then
press Options→Send→Via Bluetooth, and then select the device name.
Connect a Bluetooth hands-free or stereo headset
For hands-free phone conversations or to listen to music, you can use a Bluetooth hands-free
or stereo headset.
Go to Bluetooth→Search audio device to search for the Bluetooth hands-free or stereo headset.
Go to Menu→Camera or press the Camera key in the standby mode.
• Take a Photo
Go to Camera to take a photo.
Aim the camera at the object and then tap the Camera key to take the shot.
Before capturing a photo, adjust brightness.
• Configure your camera
Go to Camera. Press the icon on the bottom left corner to configure your camera:
♦ Switch to video recorder: Switch to record video mode.
♦ Album: Enter Album to view the photos you’ve just taken.
♦ Camera settings: Set Shutter sound, EV, Night mode, Anti-flicker, Delay timer, and
Cont. shot.
♦ Image settings: Set Image size and Image quality.
♦ White balance: Select Auto, Daylight, Tungsten, etc.
♦ Scene mode: Select Auto or Night.
♦ Effect settings: Select Normal, Grayscale, Sepia, etc.
♦ Storage: Select Phone or Memory card.
♦ Restore default: Restore to factory default settings.
Take a video
Go to Video recorder to record a scene.
Aim the camera at the object and then press the Camera key to start, press it again to
pause, and tap the icon on the bottom right corner to finish recording.
Before recording a video, adjust brightness and zoom to the right size.
Configure your video recorder
Go to Video recorder. Press the icon on the bottom left corner to configure your video
♦ Video player: Enter Video player to view the videos you’ve just record.
♦ Camcorder settings: Set EV, Night mode and Anti-flicker.
♦ Video settings: Set Video quality, Size limit reached, Time limit reached, Record
audio and Encode format.
♦ White balance: Select Auto, Daylight, Tungsten, etc.
♦ Effect settings: Select Normal, Grayscale, Sepia, etc.
♦ Storage: Select Phone or Memory card.
♦ Restore default: Restore to default factory settings.
Go to Menu→Media.
• Download Pictures
You can view the pre set websites and download pictures.
• Download Videos
You can view the pre set websites and download videos.
• Download Music
You can view the pre set websites and download music.
• Download Ringtones
You can view the pre set websites and download ringtones.
• Album
The images you want to view in Album must be put in the .. \Photos folder in the phone
or Micro-SD card, and in Options→Storage, the storage must be set to phone or card
You can select an image and view it.
Album supports: jpeg, jpg, bmp, gif, png.
Video player
The videos you want to play in Video player must be put in the ..\Videos folder in the
phone or Micro-SD card, and in Options→Storage, the storage must be set to phone or
card correspondingly.
You can then select a video and play it.
The Video player supports: H.263 baseline, Mpeg4, 3GP.
Audio player
You can play the audio in your phone or the storage card.
In My playlists, you can edit your playlists, set storage, or make personal settings.
To create a playlist, in My playlists, select Options→New playlist, and then set the list
name. Select Options→Load→Options→Add, and select the files or folder, then the
list will be loaded.
Audio player supports: AMR-NB, AMR-WB+, WAV, AAC, AAC+, MP3, MIDI.
Sound recorder
Go to Options→New record to record a sound clip. Go to Options→Settings to set
preferred storage, file format and audio quality. Go to Options→List to view the sound
clips you recorded.
FM radio
With the radio, you can search for radio channels, listen to them, and save them on your
device. Note that the quality of the radio broadcast depends on the coverage of the
radio station in that particular area. The wired headset works as an antenna, so
always connect the headset when using the radio. When you receive an incoming
call while listening to the radio, the radio will switch off. In the FM radio interface, select
Options to enter the submenu.
♦ Channel list: Edit up to 9 channels.
♦ Manual input: Manually input a channel.
♦ Auto search: Automatically searches for channels.
♦ Settings: You can turn on Background play, and Loudspeaker. You can set Record
format, Audio quality, Record storage and Channel effect.
♦ Append: Continue to record AMR files on the current file.
♦ File list: Display the list of files.
Declaration of RoHS Compliance
To minimise the environmental impact and take more responsibility to the earth we live in,
this document shall serve as formal declaration that the S by SFR 343 manufactured by ZTE
CORPORATION is in compliance with the Directive 2002/95/EC of the European Parliament
- RoHS (Restriction of Hazardous Substances) with respect to the following substances:
(1) Lead (Pb)
(2) Mercury (Hg)
(3) Cadmium (Cd)
(4) Hexavalent Chromium (Cr (VI))
(5) Polybrominated biphenyls (PBB’s)
(6) Polybrominated diphenyl ethers (PBDE’s) (Compliance is evidenced by written
declaration from our suppliers, assuring that any potential trace contamination levels of the
substances listed above are below the maximum level set by EU 2002/95/EC, or are exempt
due to their application.) The S by SFR 343 manufactured by ZTE CORPORATION, meets the
requirements of EU 2002/95/EC.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/CE.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
For this product’s Recycling Manual based on WEEE directive, please
send an email to weee@zte.com.cn, or visit the website below to download the document:
It is hereby declared that following designated product:
Product Type: GSM Dual-band GPRS Digital Mobile Phone
Model No.: Vodafone 547
Complies with the essential protection requirements of the Radio and Telecommunication Terminal Equipment
Directive (EC Directive 1999/05/EC).
This declaration applies to all specimens manufactured identical to the samples submitted for testing/evaluation.
Assessment of compliance of the product with the requirements relating to the Radio and Telecommunication
Terminal Equipment Directive (EC Directive 1999/05/EC) was performed by American TCB (Notified Body No. 1588),
based on the following standards:
EN 301 489-1 V1.8.1
EN 301 489-7 V1.3.1
EN 55020:2007
EN 55013:2001+A2:2006
EN 301 511 V9.0.2
EN 300 328 V1.7.1
EN 50360:2001
EN 50332-1:2000
This declaration is the responsibility of the manufacturer:
ZTE Corporation
ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park,
Nanshan District,Shenzhen, Guangdong, 518057, P.R.China
Authorised person signing for the company:
Xu feng
Quality Director Of ZTE Corporation
Name in block letters & position in the company
Shenzhen, 15th Mar 2010
Place & date
Legally valid signature
EN 301 489-17 V1.3.2
EN 50332-2:2003
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF