Amerec AI Boiler Optional Digital Clock Setting Instructions

Optional Digital Clock For AI Boiler Series

Setting Instructions

page 1

This time clock provides flexible timing for daily and/or weekly programming. Setting the clock is simple and fast by means of push buttons and display prompts. This timer combines 24 hour/7 day timing. Up to 8 on/off operations are allowed for each day for a total of up to 56 switching cycles per week.

Minimum time setting is 1 minute. Lithium battery provides 5 year backup.

Note: to save time you can set up each on/off cycle;

- A) to be unique for each individual day, or

- B) for Monday to Friday, or

- C) for weekends only, or

- D) for all days except Sunday, or …

- E) the entire week at one time. This can save a lot of time when programming the “on” and “off” cycles.

Directions:

- Slide the “RUN” switch to “P”.

- Press the “Day” seven times and notice a single arrow will move in steps below the letters, indicating the individual days of the week

- The next time you press the button you will see days highlighted with arrows (Monday to Friday).

- The next time you press “Day” you will see arrows highlighting S and S (weekends).

- The next time you press “Day” you will see arrows highlighting all days except Sunday

- The next time you press “Day” you will see arrows highlighting all days of the week.

#1 Setting the current time and current day:

- Slide “RUN” switch to left symbol of clock face.

- Press "Day" button until arrow points to current day. Press “h” then “m” buttons to set the current time. The

“PM” indicator shows noon to 11:59 p.m.

- Slide “RUN” switch to “RUN”. The clock colon will blink between the hours and minutes.

#2 Setting each cycle to “switch on”

- Slide the "RUN" switch to “ P ”, a “1“ indicates this is the first switch cycle and a “bulb” icon indicates a

switch-on condition (circuit closes). (Hint: odd numbers indicate a “switch-on” cycle.)

- Press day button until arrows point to selected day(s) you want this ON cycle to occur.

(see “Note” above instructing how to choose days of the week)

- Press “h” and “m” buttons to show switch-on time, noting the “PM” indicator.

4211-177 02-25-09

Optional Digital Clock For AI Boiler Series

Setting Instructions

page 2

#3 Setting each cycle to “switch off” switch-off (circuit opens). (Hint: even numbers indicate a “switch-off” cycle.)

- Press Day button until arrows point to selected day(s) you want this OFF cycle to occur.

- Press “h” and “m” button to select-switch-off time.

* Remember you can repeat the above steps to program up to 8 on/off events for each day of the week.

- Slide "RUN" switch to "RUN" position.

- The clock colon will blink.

#4 Autorun mode

- Set time and day and desired switch cycles.

- Slide set switch to “RUN” and mode switch to “AUTO”. Switching will begin with the next switch-on set time.

#5 To switch the override ON

- Slide mode switch to “ I ”.

- The switch remains on indefinitely (circuit closed).

#6 To switch the override OFF

- Slide mode switch to “ 0 “. The switch remains off indefinitely (circuit open).

#7 Skip cycle

- In automatic run mode, press the “Skip“ button, the next program is skipped

#8 Setting error

- If “ EEE “ appears, a setting error exists. The switch cycle number in error is shown. Slide set switch to "P".

- Press button until cycle is shown. review this and the following setting to correct error slide set switch to

“RUN“.

#9 Clear any setting

- Press day button until no days are indicated. Repeat for the following switch cycle. This on/off cycle is now inactive.

4211-177 02-25-09