Alpine | IVA-D105 | Owner`s manual | Alpine IVA-D105 Owner`s manual

Alpine IVA-D105 Owner`s manual
R
NVE-M300
EN
FR
GPS Navigation System
ES
OWNER’S MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
FCC COMPLIANCE STATEMENT
PRECAUTIONS AND
NOTICES
IMPORTANT INFORMATION
PLEASE READ CAREFULLY BEFORE USING THIS
PRODUCT
This product is intended to provide turn by turn instructions to
get you to a desired destination. Please make certain that all
persons using this navigation system carefully read these
precautions and the following instructions fully.
• This product is not a substitute for your personal judgment. Any
route suggestions made by this navigation system may never
supersede any local traffic regulations or your personal judgment
and/or knowledge of safe driving practices. Do not follow route
suggestions if the navigation system instructs you to perform an
unsafe or illegal maneuver, places you in an unsafe situation, or
routes you into an area which you consider unsafe.
• Glance at the screen only when necessary and safe to do so. If
prolonged viewing of the screen is necessary, pull over in a safe and
legal manner and location.
• Do not input destinations, change settings, or access any functions
requiring a prolonged view of the monitor and/or remote control
while you are driving. Pull over in a safe and legal manner and
location before attempting to access the system.
• Do not use the navigation system to route you to emergency services.
Not all locations of emergency services such as police and fire
stations, hospitals and clinics are contained in the database. Please
use your own judgment and ask for directions in these situations.
• The map database used in the navigation system is the most recent
map data available at the time of production. Because of changes in
streets and neighborhoods, there may be situations where the
navigation system is not able to route you to your desired destination.
In these cases, use your own judgment.
• The map database is designed to provide you with route suggestions
and does not take into account the relative safety of a suggested route
or of factors which may affect the time required to reach your
destination. The system does not reflect road closures or
construction, road characteristics (i.e. type of road surface, slope or
grade, weight or height restrictions, etc.), traffic congestion, weather
conditions, or any other factors which may affect the safety or timing
of your driving experience. Use your own personal judgment if the
navigation system is unable to provide you with an alternate route.
• There may be situations where the navigation system displays the
vehicle’s location erroneously. Use your own driving judgment in
this situation, taking into account current driving conditions. Please
be aware that in this situation the navigation system should correct
the vehicle’s position automatically. However, there may be times
where you may have to correct the position yourself. If this is the
case, pull over in a safe and legal manner and location before
attempting operation.
• Make certain that the volume level of the navigation system is set to a
level which still allows you to hear outside traffic and emergency
vehicles.
NVE-M300 has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide more reasonable
protection against harmful interference in a residential
installation, and are more stringent than “outdoor” requirements.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, you are encouraged to try to correct the interference
by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult an experienced radio/TV technician.
If there is anything in the manual about the operation of
the navigation system which you are uncertain about,
please contact your local Alpine authorized navigation
dealer or Alpine at 1-888-NAV-HELP (1-888-628-4357)
before using the navigation system.
1-EN
USER AGREEMENT
In using this NVE-M300 GPS Portable Navigation System
(hereinafter referred to as “System”), which includes Alpine
Electronics, Inc. (“Alpine”) Specifications, Space Machine, Inc.
(“Space Machine”) Software and NAVTEQ North America, LLC.
(“NAVTEQ”) Database, you are bound by the terms and
conditions set forth below. By breaking the seal on the System
and using your copy of the System, you have demonstrated your
agreement to the terms and conditions of this Agreement. You
should, therefore, make sure that you read and understand the
following provisions.
The System may not be copied, duplicated or otherwise
modified, in whole or in part, without the express written
permission of Alpine, Space Machine and NAVTEQ.
The System may not be transferred or sublicensed to any third
party for profit, rent or loan or licensed for reuse in any manner.
The System may not be decompiled, reverse engineered or
otherwise disassembled, in whole or in part.
The System may not be used in a network or by any other
manner of simultaneous use in multiple systems.
The System is intended solely for personal use (or internal use
where the end-user is a business) by the consumer.
The System is not to be used for commercial purposes.
Neither Alpine, Space Machine nor NAVTEQ guarantees to the
customer that the System meet the specific objectives of the
user.
Neither Alpine, Space Machine nor NAVTEQ shall be
responsible for any damages caused by the use of the System to
the actual user and to any third party.
The warranty on the System shall not extend to an exchange or
refund due to misspelling, omission of letters, or any other
cosmetic discrepancy in layout found in the System.
The right to use the System shall expire either when the user
destroys this software, or when any of the terms for use is
violated and Alpine, Space Machine and/or NAVTEQ exercise
the option to revoke the license to use this software.
The terms and conditions hereof apply to all subsequent users
and owners as well as to the original purchaser.
The NAVTEQ Database may include or reflect data of licensors,
including Her Majesty The Queen in right of CANADA. Such data
is licensed on an “AS IS” basis. The licensors, including Her
Majesty The Queen, make no guarantees, representations or
warranties respecting such data, either express or implied,
arising by law or otherwise, accuracy or fitness for a particular
purpose.
The licensors, including Her Majesty The Queen, shall not be
liable in respect of any claim, demand or action, irrespective of
the nature of the cause of the claim, demand or action alleging
any loss, injury or damages, direct or indirect, which may result
from the use or possession of the data or the NAVTEQ database.
The licensors, including Her Majesty The Queen, shall not be
liable in any way for loss of revenues or contracts, or any other
consequential loss of any kind resulting from any defect in the
data or the NAVTEQ database.
End User shall indemnify and save harmless the licensors,
including Her Majesty The Queen and the minister, and their
officers, employees and agents from and against any claim,
demand or action, irrespective of the nature of the cause of the
claim, demand or action, alleging loss, costs, expenses,
damages or injuries (including injuries resulting in death) arising
out of the use or possession of the data or the NAVTEQ
database.
2-EN
WARNINGS
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
Points to Observe for Safe Usage
• Read this manual carefully before using this system. It contains
instructions on how to use this product in a safe and effective manner.
Alpine cannot be responsible for problems resulting from failure to
observe the instructions in this manual.
• This manual uses various pictorial displays to show you how to use
this product safely and to alert you to potential dangers resulting
from improper connections and operation. Following are the
meanings of these pictorial displays. It is important to fully
understand the meanings of these pictorial displays in order to use
this manual and the system properly.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions.
Failure to do so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
PRECAUTIONS
Temperature
Be sure the temperature inside the vehicle is between +50°C
(+122°F) and -10°C (+14°F) before turning your unit on.
Fuse Replacement
When replacing the fuse(s), the replacement must be of the same
amperage as shown on the fuse holder. If the fuse(s) blows more
than once, carefully check all electrical connections for shorted
circuitry. Also have your vehicle’s voltage regulator checked.
Servicing the Unit
If you have problems, do not attempt to repair the unit yourself.
Return it to your ALPINE dealer or the nearest ALPINE Service
Station for servicing.
Installation Location
Make sure the NVE-M300 will not be exposed to:
•
•
•
•
Direct sun and heat
Excessive dust
High humidity
Excessive vibrations
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE THIS PRODUCT AS SPECIFIED.
Use for other than its designed application may result in fire,
electric shock or other injury.
KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
3-EN
Contents
Destination Options
Finding Nearby Places .................................... 16
PRECAUTIONS AND NOTICES
IMPORTANT INFORMATION ....................... 1
USER AGREEMENT ...................................... 2
WARNINGS
Points to Observe for Safe Usage ..................... 3
WARNING ....................................................... 3
CAUTION ........................................................ 3
PRECAUTIONS ............................................... 3
Getting Started
Accessories List ................................................ 6
System Features ................................................ 6
Finding Alternative Routes to the
Destination .................................................. 16
Setting a Destination as Home ........................ 16
Saving a Destination into the Address
Book ............................................................ 17
Setting Waypoints ........................................... 17
Adding a Waypoint ...................................... 17
Adding another Waypoint ........................... 17
Setting a Waypoint Directly from the
Map .......................................................... 17
Optimizing Your Route ............................... 17
Deleting a Waypoint .................................... 18
Deleting All Waypoints ............................... 18
Editing Order of Waypoints ........................ 18
ROUTE
Turning the System On ..................................... 6
Viewing Turn List During Guidance .............. 19
Main Menu ....................................................... 7
Finding an Alternate Route ............................. 19
Map Functions .................................................. 8
Finding a Detour ............................................. 19
From the Map Display
Setting a Destination ......................................... 9
Finding Local Places ........................................ 9
Setting Waypoints ............................................. 9
Input a Destination
Editing Waypoints .......................................... 20
Canceling Route ............................................. 20
Home
Going Home ................................................... 20
Settings
Go to Menu ..................................................... 10
Settings Menu ................................................. 21
Set a Destination by Address .......................... 11
Finding a Destination by Entering Street
Name First ................................................ 11
Finding a Destination by City Name
First .......................................................... 11
Set a Destination by Place .............................. 12
Finding a Place From Here or Near Your
Destination ............................................... 12
Finding a Place From City Center ............... 12
Finding a Place along Your Route ............... 13
Set a Destination by History ........................... 13
Deleting All History .................................... 13
Set a Destination from the Address Book ...... 13
Editing Address Book ................................. 13
Set a Destination by Coordinates .................... 14
Customizing Display ...................................... 22
Menu Color ................................................. 22
Screen Position Adjustment ........................ 22
Screen Recalibration ................................... 22
Sync with Head Unit Color
(iXA-W404, etc.) ..................................... 22
Customizing Map ........................................... 22
Displaying and Editing Icons on the Map ... 22
Showing Trail Dots ..................................... 22
Customizing Navigation Tool ......................... 23
Route Method .............................................. 23
Guidance Map ............................................. 23
Route Button ............................................... 23
Show Route Overview ................................. 23
Auto Zoom .................................................. 23
Avoid Unverified Roads if Possible ............ 23
Start Demo .................................................. 23
Setting Audio .................................................. 23
Changing Voice Guidance Volume ............. 23
Button Sounds ............................................. 23
Guidance Prompt ......................................... 23
Set a Destination by Intersection .................... 14
Finding a Intersection by Entering a Street
Name First ................................................ 14
Finding a Intersection by Entering a City
Name First ................................................ 15
4-EN
Regional Settings ............................................ 24
Language ..................................................... 24
Units ............................................................ 24
Clock ........................................................... 24
Time Zone ................................................... 24
Information
Information Menu ........................................... 25
Viewing Dashboard ........................................ 25
Viewing GPS Status ........................................ 26
Viewing System Information .......................... 26
Updating Software and Map Data
Access software and/or Map updates ............. 26
Reference
In Case of Difficulty ....................................... 27
Specifications .................................................. 27
5-EN
Turning the System On
Getting Started
Congratulations and thank you for purchasing the Alpine NVE-M300
GPS Navigation System. We hope you enjoy using this exciting product
and trust that it will make your driving experience more comfortable,
stress-free, and entertaining.
The NVE-M300 GPS Navigation System provides an easy-to-use user
interface, clear, easy-to-understand spoken driving instructions, and
award winning design all in a portable product. NVE-M300 is built
upon Alpine’s history of navigation success in North America. Please
read this manual carefully. If you have any further questions about
NVE-M300’s operation, feel free to call Alpine at 1-888-NAV-HELP
(628-4357) for technical assistance.
With this system, when the display monitor is set in the navigation
display mode or external input display mode and the ignition key is
turned to the ACC or ON positions, the opening screen will
automatically be displayed.
1
Every time you boot up the system, both the
language selection menu and IMPORTANT! are
displayed on the screen. Touch the desired
language.
If the navigation system is connected to Alpine touch panel-compatible
monitor or AV Head Unit (IVA-D105, IVA-W505, iXA-W404, etc.)
touch operation can be performed by directly touching the monitor.
After the language has been selected, important
information is displayed in each language.
Be sure to read the important information.
Accessories List
•
•
•
•
•
•
•
•
•
•
•
NVE-M300 Box unit ......................................................... ×1
Power Vehicle Hanes Cable ........................................... ×1
Velcro fastener ................................................................ ×2
Flanged Self-tapping screw (M4×14) ............................ ×4
13pin RGB extension Cable........................................... ×1
USB mini Cable ............................................................... ×1
GPS antenna ................................................................... ×1
GPS Waterproof pad....................................................... ×1
Cable clamp (for GPS antenna) ..................................... ×5
Antenna mounting plate................................................. ×1
Owner’s Manual ........................................................... 1set
System Features
4
5
6
1
2
3
1 Power Connector
2 USB Connector
3 Access Indicator
The Access Indicator blinks while updating. The Access
Indicator lights up when a USB mini cable is connected.
4 RGB OUT Connector
5 EXT. IN Connector
Currently not used.
6 GPS ANT. Connector
• For how to install/connect, refer to the Installation Manual of the
NVE-M300.
6-EN
2
After you have read this important information,
touch [I Accept].
The map screen is displayed.
4 Settings Button
Main Menu
Press this to change system settings. See pages 21-24.
4
1
3
5
2
1 Info Button
Press this to check information such as:
• GPS receiver status
• Speed and trip information
See pages 25-26.
5 Map Button
Press this to go to the map. See page 8.
2 Go to Button
Press this to start entering a destination. See pages 10-15.
3 Home Button
Press this to go to a saved home location. See page 20.
7-EN
6 Current Position
Map Functions
7 Change Route View to Arrow Only Mode
!
Switching Map Display
Touch this button to switch between Map
and Arrow modes.
@
1
0
• You can only switch map display during guidance mode.
9
Arrow Mode
Displays three successive arrow maneuvers
all the way to your destination while
providing turn-by-turn guidance prompts.
2
3
8
4
7
5 6
#
1 Next Maneuver Arrow and Voice Prompt Button
Repeating the Announcement
Touch this icon to repeat the guide
announcement.
(Same as Next Maneuver Arrow)
Map Mode
Shows a full-screen map of the area while
providing turn-by-turn guidance prompts.
8 Zoom Out Button
Touch this icon to zoom out.
2 Route Button
Touch this icon and it will take you to the
route menu.
9 Zoom In Button
Touch this icon to zoom in.
• When not in the guidance mode, only the current position
can be seen. Zoom buttons, Map Orientation button and
Main Menu are available.
3 Estimate Time Display
This icon displays Estimated Time
Remaining, Estimated Time of Arrival or
Direction to Destination.
See page 23 to change this setting.
• The time estimates are based on the average speed. The
estimate time will vary depending on vehicle speed. The
arrow always points toward the destination.
4 Map Orientation
Touch this icon to switch between North Up, Heading Up
and 3D View.
North Up
In north up view, north is always at the top of the
display. This makes it easy to determine your
current heading with respect to the map.
Heading Up
In heading-up view, the current direction is
always pointing to the top of the display. This
makes it easy to see the direction of the next turn
on the map.
3D View
The 3D View offers you a more realistic
perspective by tilting the map and displaying it
with a horizon line. Streets are displayed as you
approach them instead of from a birds-eye view.
5 GPS Status Bar
GPS Signal Strength
8-EN
0 Main Menu Button
! Next Street Name
@ Touch panel-compatible monitor Access Button
Operation buttons on the connected Touch panelcompatible monitor or AV Head Unit are displayed.
For details, refer to the Owner’s manual of the Touch panelcompatible monitor or AV Head Unit.
# Highway Exit Button
When the vehicle is on a Highway, the screen is displayed.
Highway exit information is displayed as a list in order of
close proximity to current position.
You can also set a waypoint, etc., by touching the desired
Highway Exit.
4
Select the desired category and the desired place.
Touch anywhere on map screen.
5
Touch [Go!] on the Confirm Destination Screen.
The vehicle arrow changes to a crosshair cursor.
• To use destination options on the Confirm Destination Screen, see
pages 16-18 for details. See Find Local Places on pages 12-13 for
finding places though Places menu.
From the Map
Display
Setting a Destination
1
2
Setting Waypoints
Position bar
3
5
Touch anywhere on map screen.
2
The vehicle arrow changes to a crosshair cursor.
3
Move the cursor to the desired waypoint.
4
Move the cursor to the new desired street.
• Use Map Zoom button to zoom out the map if the destination is far
from the current location.
4
1
5
Touch the selected position bar on the bottom of the
screen.
Touch the selected position bar on the bottom of the
screen.
Select Set as Waypoint and the destination will
automatically be added to the Waypoint List.
Select Set as Destination.
6
Touch [Go!].
• To add another waypoint, see page 17.
6
Touch [Go!] on the Confirm Destination Screen.
• To use destination options on the Confirm Destination Screen, see
pages 16-18 for details. To cancel, touch Previous Screen icon
.
Finding Local Places
1
Touch anywhere on map screen.
The vehicle arrow changes to a crosshair cursor.
2
3
Touch the selected position bar on the bottom of the
screen.
Select Find Nearby Places.
9-EN
3 Places Button
Input a Destination
Select places. See pages 12-13.
Go to Menu
Go to Main Menu
Go to
1
2
3
7
6
4
4 Returns to the previous screen.
5 Page List Down
6 Map Button
Press this to go to the map. See page 8.
7 Address Book Button
Select from saved destinations. See page 13.
5
8
9
8 Intersection Button
0
Set destination by intersection. See pages 14-15.
1 Address Button
Search by typing an address. See page 11.
• Last 4 Streets/Last 4 Cities:
The last four street names and city names searched are
stored in memory.
You can reselect a street name/city name from this list.
• Last 4 Streets/Last 4 Cities:
The last four street names and city names searched are
stored in memory.
You can reselect a street name/city name from this list.
9 Coordinates Button
Set destination using geographic coordinates. See
page 14.
2 History Button
Select from recent destinations. See page 13.
0 Page List Up
10-EN
Set a Destination by Address
5
If there are multiple matches, the system lists cities
containing the street name and address number that you
keyed in.
There are several ways to set a destination. You can set a destination
directly from the map (page 9) or select Go to from the main menu.
Go to Main Menu
Go to
Address
Finding a Destination by Entering Street
Name First
1
Select by Street.
2
Type the street name and touch [OK].
6
7
Select the desired street name from the list.
See pages 16-18, to see more details about Options
on the confirmation destination screen.
1
Select by City.
2
Type the city name and touch [OK].
If there are multiple matches, the system automatically
displays a short list of city names. Select the desired city.
3
4
5
6
4
The Confirm Destination Screen appears. Touch
[Go!] to calculate the route.
Finding a Destination by City Name First
If there are multiple matches, the system automatically
displays a short list of street names.
Type only the name of the street. Prefix and suffix of the
street are not necessary.
The list of applicable street names appears.
3
Type the desired city.
Type the characters of the street name and touch
[OK].
The list of applicable street names appears. Select
the desired street.
Type the address number and touch [OK].
The Confirm Destination Screen appears. Touch
[Go!] to calculate the route.
Type the address number and touch [OK].
11-EN
Set a Destination by Place
You can select from approximately 6 million place locations stored
inside your NVE-M300 GPS Navigation System.
Go to Main Menu
Go to
3
4
Use the arrow to the right of the list to scroll up and
down the list.
Select the desired place.
For emergency locations such as Police Stations, Hospitals,
etc., please verify availability before proceeding to such
locations.
Places
5
The Confirm Destination Screen appears. Touch
[Go!] to calculate a route.
By Type
Finding a Place From Here or Near Your
Destination
1
Select by Type.
2
Select a desired type.
• Last 4 names and Last 4 types takes you to a list from the last 4
places/types you have previously entered.
• If you find a place near your destination:
When you arrive at a destination, a destination name (POI search),
address and telephone number are displayed in the display bar.
If you want to display a trip summary, touching the arrow in the
display bar, and [Summary] will display a detailed trip summary.
Display bar
3
4
By Name
1
2
Select by Name.
There are 37 Place categories to choose from
including ATMs, Banks, Gas Stations, Grocery
Stores, Hotels, Parking Lots, Restaurants and more.
Follow steps 3 through 5 of the instructions above.
Finding a Place From City Center
1
Select From City Center.
2
Select by City.
Type the desired place name. Touch [OK].
• Last 4 Cities takes you straight to the list of cities you have
previously entered.
3
Type a city name and select a city.
4
You can choose by Name or by Type.
5
A list of place names appears.
12-EN
Follow steps from “by Name” or “by Type” on
page 12.
Finding a Place along Your Route
Set a Destination from the Address Book
1
Select Along Route.
Go to Main Menu
2
Select the desired place type button. Touch [OK].
1
• Highlighted button means it is selected. You can select multiple place
types. Touch the button again to turn the selection on or off.
2
3
Select the desired destination.
The Confirm Destination Screen appears. Touch
[Go!] to calculate the route.
Editing Address Book
Go to Main Menu
Go to
Address Book
Touch [Go!].
Set a Destination by History
Go to Main Menu
1
Address Book
A list of places appears
Select the desired place.
4
Go to
Go to
History
The list of recent destinations appears. Select the
destination.
1
Select the destination you would like to modify.
2
Touch
3
to edit your entry.
Edit Name, Phone Number and Icon or delete the
selected destination.
• Select Deleat All to delete all addresses saved in the address book.
2
The Confirm Destination Screen appears. Touch
[Go!] to calculate the route.
• To use destination options on the Confirm Destination Screen, see
pages 16-18 for details.
Deleting All History
Go to Main Menu
History
1
Touch [Clear All].
2
Touch [Yes] to delete all previous destinations.
13-EN
Set a Destination by Coordinates
Set a Destination by Intersection
Go to Main Menu
Go to Main Menu
1
2
3
Go to
Coordinates
Go to
Intersection
Enter the Latitude of your destination. Touch [OK].
Finding a Intersection by Entering a Street
Name First
Enter the Longitude of your destination. Touch [OK].
1
Select by Street.
2
Type in the first street name. Touch [OK].
The Confirm Destination Screen appears. Touch
[Go!] to calculate the route.
• To use destination options on the Confirm Destination Screen, see
pages 16-18 for details.
The list of applicable street names appears. Select the
desired street and input the address number.
3
Input the second street name.
If there is only one street crossing with the first street, the
name of the street automatically appears.
4
5
Confirm City name if there are more than 1 cities
with the same intersection.
The Confirm Destination Screen appears. Touch
[Go!] to calculate the route.
• To use other functions on the Confirm Destination Screen, see
pages 16-18 for details.
14-EN
Finding a Intersection by Entering a City
Name First
If you know the city name of the intersection you are searching, select
by City. The choice of the street is narrowed down automatically. This
saves time in entering the street information.
1
Select by City.
2
Type the city name, then select the city from the list.
3
Input the first street name.
4
Input the second street name.
5
The Confirm Destination Screen appears. Touch
[Go!] to calculate the route.
• Last 4 Street and Last 4 Cities takes you to a list of the last 4 entries.
15-EN
Destination
Options
The Destination Options Menu allows you to find places nearby, find
alternative routes to get to your destination, set a destination as your
home, save a destination in the address book, and create waypoints.
Finding Alternative Routes to the
Destination
1
Touch [Change Method].
2
Select a method below.
To get to the Destination Options Menu, enter your desired destination
by using the method on pages 10-15 in order to get to the Confirm
Destination Screen.
Select Options.
Avoid Freeway
Avoid Toll Road
Use Time Restricted Road
Use Ferry
Finding Nearby Places
1
Touch [Find Nearby Places].
2
Select a desired place type.
3
Select a desired place name.
4
Touch [Go!] to calculate the route.
3
Select Quickest or Shortest.
4
Touch [OK].
Setting a Destination as Home
1
Touch [Set as Home].
2
Touch [OK] or type desired name and touch [OK].
3
• To find local places directly from the map, go to page 9.
4
16-EN
Select desire icon. If there is no desired icon, touch
[No Icon].
Touch [OK].
Saving a Destination into the Address
Book
1
2
Touch [Save to Address Book].
3
4
2
3
4
Enter the waypoint with any method just as finding a
destination. (pages 10-15)
Touch [Set as Waypoint] to confirm.
The system returns to the Waypoint List screen.
Touch [Go!] to calculate the new route.
Type in desired name. Touch [OK].
Setting a Waypoint Directly from the Map
Select an icon. If there is no desired icon, touch [No
Icon].
Touch [OK].
Setting Waypoints
You can set up to 3 waypoints between you current location and your
destination. The final destination must be set before entering any
waypoints.
See page 9.
Optimizing Your Route
1
Touch [Set as Waypoint]. The Waypoint List appears.
2
Touch [Options]. Waypoint options screen appears.
3
Touch [Optimize Route].
Adding a Waypoint
1
Touch [Set as Waypoint] and the destination is
automatically added to the Waypoint List.
4
2
The system takes you back to the Waypoint List
screen with optimal route. Touch [Go!] to calculate
the route.
Touch [Go!] to calculate the route.
Adding another Waypoint
1
Before you touch [Go!] at the Waypoint List screen,
touch [+ Add Waypoint].
17-EN
Deleting a Waypoint
1
Select the desired waypoint to delete from the list.
2
Touch [Delete].
4
5
Use the Up and Down buttons to move the waypoint.
Touch [OK] and the system returns to the Waypoint
List screen.
Deleting All Waypoints
1
2
3
Touch [Options].
Touch [Delete All Waypoints]. Touch [Yes] to
confirm.
If all waypoints are deleted, will return to the
waypoint list. To get back to the Map screen, touch
[Map] to get back to the map.
Editing Order of Waypoints
1
2
3
Main Menu
Info
Route
Edit Waypoint
or
from the Map
Route Button
Edit Waypoint
At the Waypoint List Screen, select the desired
waypoint to edit.
Touch [Edit Order].
18-EN
6
Touch [Go!] to calculate the route.
ROUTE
Viewing Turn List During Guidance
You can view a list of street names and upcoming turns and streets.
Main Menu
Info
Route
or
• You can select and re-calculate an alternate route based on Quickest
Route or Shortest Route and select Avoid Freeway, Toll Road, Time
Restricted Road or Ferry.
directly from the Map
1
Touch [View Turn List].
Finding a Detour
By Distance
1
2
On Route screen, touch [Detour].
Choose detour from 1/2 mile, 1 mile, 2 miles or 5
miles.
The system automatically calculates and displays a
detoured route.
2
A list of upcoming streets and turns appears on the
screen.
To preview a specific point, select a street name/maneuver
on the list.
Avoiding a Particular Street
1
Finding an Alternate Route
1
2
Touch [View Turn List].
List of upcoming streets and turns appears on the
screen. Select the street name, and touch its check
box.
Check box
On Route screen, touch [Change Method].
3
Touch [Avoid].
19-EN
Editing Waypoints
To edit waypoints, see page 18.
Canceling Route
From Route screen, touch [Cancel Route].
• After canceling the route, you cannot select Route Menu until the
next destination has been set. To set next the destination, see Go to
Menu on page 10.
Home
You can go Home from anywhere once the Home Address is set. See
page 16 to set a destination as Home.
Going Home
Go to Main Menu
1
Home
Touch [Go!] to calculate the route.
• To find an alternate Route to go Home, see page 19.
20-EN
3 Navigation Button
For navigation settings, see page 23.
Settings
Settings Menu
Go to Main Menu
1
2
3
7
4
6
5
4 Returns to the previous screen.
8
9
5 Page List Down
6 Map Button
Press this to go to the map. See page 8.
7 Audio Button
For audio settings, see page 23.
0
1 Display Button
For display settings, see page 22.
8 Regional Button
For Regional settings, see page 24.
2 Map Button
For map settings, see page 22.
9 Restore Defaults Button
This allows you to delete all stored information and default
back to the original factory settings.
0 Page List Up
21-EN
Screen Recalibration
Customizing Display
Go to Main Menu
Display
This allows you to recalibrate the touch screen for better accuracy.
Sync with Head Unit Color (iXA-W404, etc.)
The menu color of the NVE-M300 is synchronized with the color
setting on the connected iXA-W404, etc.
Customizing Map
• Touch [OK] to complete the setting.
You can customize map color, vehicle icon, and place icons on the map.
Go to Main Menu
Map
Menu Color
You can choose from 4 different colors (Aqua, Ruby, Emerald and
Amber) for all menu screens.
Screen Position Adjustment
You can adjust the position of the navigation screen displayed in the
monitor.
• Touch [OK] to complete the setting.
Displaying and Editing Icons on the Map
Place Icons, the Home Icon and Icons used in the Address Book can be
turned on and off from the Display Setup Menu.
Showing Trail Dots
Touch [Adjust], adjust up, down, left and right in the
adjustment screen, and then touch [Set].
22-EN
The Trail feature allows you to turn on and off trail dots that appear
wherever the vehicle icon traverses. This is especially helpful for offroad enthusiasts.
Customizing Navigation Tool
Go to Main Menu
Navigation
Show Route Overview
This button allows you to view the full route after the destination has
been calculated and before the guidance begins.
Auto Zoom
When approaching a maneuver, the map automatically zooms in.
Avoid Unverified Roads if Possible
This button avoids using roads not verified by the map provider.
Start Demo
You can watch a navigation demonstration with the system’s voice and
screen guidance.
• Set a destination before using this function.
Setting Audio
Route Method
Go to Main Menu
Audio
You can change the routing method.
See page 19 for details.
Guidance Map
You can choose between full map and arrow only in guidance mode.
Route Button
You can choose between 3 different route buttons.
Changing Voice Guidance Volume
This allows you to vary the volume of the voice guidance prompts.
Button Sounds
This allows you to turn button sounds ON or OFF.
Guidance Prompt
This allows you to turn ON or OFF the guidance prompts.
Arrival time & distance to destination.
Remaining time & distance to destination.
Direction of destination.
23-EN
Regional Settings
Go to Main Menu
Regional
Language
You can select a Language from English, French and Spanish.
Units
You can set the Units of Measure to read in kilometers or miles.
Clock
You can set the Clock to 12 or 24 hour style and set Daylight Savings to
fit your region.
Time Zone
You can set the Time Zone to fit your region.
24-EN
Viewing Dashboard
Information
Go to Main Menu
Info
Dashboard
The odometer displays the speed and time traveled.
Information Menu
Go to Main Menu
Info
1
2
3
4
1 Dashboard Button
Driving Average
Average speed.
Overall Average
Average speed (includes idle time.).
Maximum Speed
Maximum speed reached.
Driving Time
Time vehicle has been moving.
Idle Time
Time vehicle has been stopped (not moving).
Total Time
Total elapsed time (driving time plus idle
time).
For viewing dashboard, see page 25.
2 GPS Button
For viewing GPS, see page 26.
3 Route Button
For changing the route, see page 19.
4 System Button
For viewing system information, see page 26.
25-EN
Viewing GPS Status
This feature allows you to view GPS satellite signal information. You
can view the dynamic location information received from satellite, such
as, signal strength, compass (direction information), latitude/longitude,
approximate altitude.
Updating Software
and Map Data
An explanation of the messages is shown below.
Go to Main Menu
Info
GPS
Access software and/or Map updates
Software and/or map updates can be accessed by connecting the NVEM300’s to a PC.
Download Update File and Tool to your PC from the Alpine web
site. For details and the procedure for updating the software and
map data, visit http://www.alpine-usa.com
The following messages are displayed while the GPS receiver is
tracking satellites:
Locating GPS Satellites
The NVE-M300 searches the sky looking for GPS satellites.
Acquiring GPS Signal
The NVE-M300 acquires positioning information transmitted
from 1 to 3 tracked satellites while searching for more satellites
(minimum 4 of needed).
Fixing GPS Position
The NVE-M300 requires continuous signals from 4 or more
tracked satellites (for 30 seconds) in order to accurately fix your
position.
Temporary Poor GPS Coverage
Thunderstorms, dense foliage or surrounding tall buildings may
cause temporary loss of position fix (acceptable if under 30
seconds).
Poor GPS Signal, Lost Position Fix
You may have entered an area where consistently poor GPS
signal (lasting 30 seconds or more) makes it impossible to
maintain a position fix.
No Line of Sight, Lost GPS Tracking
You are in an area where line of sight to GPS satellites has been
blocked.
Viewing System Information
You can check software application, database version, and other
information on this screen.
Go to Main Menu
Info
System
• Make a note of this information and refer to it whenever you
communicate with customer support.
26-EN
Reference
In Case of Difficulty
If you encounter a problem, please review the items in the following
checklist. This guide will help you isolate the problem if the unit is at
fault. Otherwise make sure the rest of your system is properly connected
and completely charged. Contact your authorized Alpine dealer or
Alpine directly at 1-888-NAV-HELP (1-888-628-4357).
The vehicle’s position is erroneous.
Specifications
Power Requirements:
Box Unit Size (W×H×D):
Box Unit Weight:
Operating Temp:
Installation Angle:
CPU:
GPS:
Internal Storage:
Drive the vehicle in an area of good GPS reception to allow the
unit to recalibrate itself. Move to a location where strong GPS
reception is possible.
USB Interface:
No operation
Moisture
condensation
Allow enough time for the condensation to
evaporate (about 1 hour).
Ambient
Temperature
Make sure the temperature inside the vehicle
is between -10°C and 50°C (14°F and
122°F).
Blown Fuse
Replace the fuse of the same size.
14.4V DC (10-16V allowable)
85mm × 25mm × 110mm
265g (9.3 oz)
-10°C to 50°C (14°F to 122°F)
Roll:±10 degrees
Pitch:±30 degrees
Yaw:±10 degrees
SiRF Titan
12 channel (32 channel
acquisition) receiver
Built-in flash memory with Preloaded Maps of US, Canada,
Puerto Rico, and the Virgin
Islands
2.0
• Due to continuous improvements, specification are subject to change
without notice.
The unit does not function.
If you incorrectly install the Box unit, malfunction will occur.
For installation instructions, refer to the Installation Manual.
The touch panel-compatible models (IVA-D105, IVA-W505, iXAW404, etc.) sold after 2004 can be connected to the unit.
However, some units may not work, or some functions may not
work, when connecting to this unit. For details, contact your
Alpine dealer.
Reset
If malfunction occurs, disconnect the unit from the Power
Vehicle Harness cable.
27-EN
R
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku, Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway,
Hallam Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117,
80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway,
Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle Cedex,
France
Phone 01-48638989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
© 2009 Alpine Electronics of America, Inc. All Rights Reserved.
© 2006-2008 NAVTEQ. All Rights Reserved.
Designed by ALPINE Japan
68-10872Z69-A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising