- No category
advertisement
Leica DISTO™ with Bluetooth Smart usage on
V 1.0 December 2013
Content
Leica DISTO™ devices
Bluetooth compatibility
Leica DISTO™ Bluetooth Smart
Leica DISTO™ sketch for iOS
Keyboard Mode iOS
The Leica DISTO™ devices with Bluetooth®
Leica DISTO™ D3a BT (D330i)
Bluetooth® 2.1
Requires
SPP support
Leica DISTO™ D8
Bluetooth® 2.1
Requires
SPP support
Leica DISTO™ D510
(E7500i)
Bluetooth® Smart
Requires
Bluetooth® 4.0
Leica DISTO™ D810 touch
Bluetooth® Smart
Requires
Bluetooth® 4.0
Overview
DISTO™ compatibility
Availability Windows 7 Windows 8 Windows Mobile
6.5
Android iOS
Leica DISTO™ sketch *)
Leica DISTO™ sketch *)
Leica DISTO™ transfer **)
Leica DISTO™ transfer PPC ***)
Leica DISTO™ transfer PC ***)
Keyboard Mode ***)
www.disto.com
www.disto.com
No installation required
-
-
-
-
-
-
-
-
-
Windows 8.1
****)
-
-
-
-
-
-
-
-
-
Android 4.3
Android 4.3
****)
-
-
-
-
*) Draw sketches and export these as pdf file or the measurements via csv file
**) Integrated Excel application to send values to a spread sheet. Also measurements are transferred into the clipboard to be pasted at any position in an application
***) DISTO™ connects as a keyboard and sends data right to cursor position in any application or software
****) In development, planned for January 2014
Prolog
This presentation should provide further advice on how to use the
Leica DISTO™ with Bluetooth® Smart. Also the corresponding Apps for iOS are described in this document.
Leica DISTO™ Bluetooth Smart
Getting started
General
Bluetooth® Smart
Bluetooth® Smart is compatible with Bluetooth® 4.0 or Bluetooth® Smart Ready devices
Bluetooth® Smart has very low power consumption why it is by default switched on
Leica DISTO™ D510
(E7500i)
Bluetooth® Smart
The Bluetooth® can be switched off in the Settings of the
Leica DISTO™ D510
(E7500i)
The Leica DISTO™ D510 only supports the connection to iOS or Android 4.3 Apps
(E7500i)
Press ‘=‘ to switch on or off
Leica DISTO™ D810 touch
Bluetooth® Smart
The Bluetooth® can be switched off in the Settings of the
Leica DISTO™ D810 touch
Leica DISTO™ D810 touch
Bluetooth® Smart
The Leica DISTO™ D810 touch provides 3 different modes for use with Bluetooth®
Go to Bluetooth® Settings
Keyboard
Spreadsheet
– Mode
E.g. 7.123
decimal numbers
Keyboard
Text
– Mode
E.g. 7.123m
2‘2“13/32
TAB: sends a Tabulator after each value
Enter: sends a Enter after each value none: only value will be sent
0.0: decimal separator is a dot (default)
0,0: decimal separator is a comma
Encrypted: required for Windows and iOS (default)
Unencrypted: required for Android
App - Mode
Leica DISTO™ sketch
Getting started
Leica DISTO™ sketch for iOS
Start App
When using with
Leica DISTO™ D810 touch we are recommending to use the App mode for
Bluetooth®
This App only works with
Leica DISTO™ D510 and D810 touch
Tutorial
Leica DISTO™ sketch for iOS
Start App
– Connect Bluetooth®
Message only appears for
Leica DISTO™ D810 touch
Leica DISTO™ sketch for iOS
Sketch layout Overview
Click for change name of sketch
Back to Overview of sketches
3D preview or list of measurements
Options
Add single like
Add freehand sketch
Value from
DISTO™
Undo
Add Textfield or Sub-sketch
Leica DISTO™ sketch for iOS
Options Overview
Establish Bluetooth® connection
Save drawing or photo and file with list of measurements in photo library
Set type of endings for dimension lines in photos
Start Tutorial
Visit
Leica DISTO™ webpage
Software version of App
Send pdf file with drawing or photo and csv file with list of measurements via email
Scales drawing according measurements
Enable coloring of closed areas
See Video on YouTube
Go to
DISTO™ registration for 3rd year warranty
Leica DISTO™ sketch for iOS
Create new sketch
Magnification of point
Draw freehand sketch Hold finger on corner and move to rectangular shape
*)
Move Value to line
Move Value to line
*) Auto-scale only works on rectangular sketches and it will not change any room angle on the sketch from 90
°
Leica DISTO™ sketch for iOS
Create new sketch with photo
3.
2.
1.
Leica DISTO™ sketch for iOS
Download and use of pdf-documents
Send Email with pdf document and open it on iPhone or iPad
Leica DISTO™ sketch for iOS
Adding Sub-sketches and Text to sketches
From 2D Floorplan
Click on pen to enter Text Choose picture, grid or library
Click and hold for moving icon
From 3D Preview
Wipe for rotating
Choose picture, grid or library
Red wall indicates sub-sketch
To edit a Text field or sub-sketch in 2D Floorplan click on the Icon or text and then click on the pen symbol
Leica DISTO™ sketch for iOS
Good to know
If you want to unpair device to prevent automatic detection either switch off
Bluetooth® at
DISTO™ or press „Forget device“ in the settings of the iOS device
When a Leica DISTO™ D810 touch is already paired with one iOS device it cannot be paired with a second device at the same time, it needs to be unpaired first!
Leica DISTO™ sketch for iOS
Good to know
Auto-scale only works on rectangular sketches and it will not change any room angle on the sketch from being 90°
The Leica DISTO™ device only sends the currently measured value. To send a result from the main line of the
DISTO™ press the „=„ key
You can also send any measurement value to the Text input field
Leica DISTO™ sketch for iOS
Good to know
If you like to transfer distance measurement values including the inclination you need to switch on the Level option in the Setting of your
Leica DISTO™ device.
You can also transfer an area, volume or a slope by sending the
„=„ key of your
Leica DISTO™ device
Keyboard Mode
Getting started
Keyboard Mode with iOS
How to start
This mode is only supported by the
Leica DISTO™ D810 touch
You can use either the iOS Bluetooth® manager to pair the devices or the Leica
DISTO™ sketch App. Once the iOS device and the Leica DISTO™ are paired they will immediatelly connect if both are switched on.
The Leica DISTO™ will be considered as a keyboard. So by sending a measurement the iOS device believes you are writing the value on a keyboard.
You need to either set the
DISTO™ D810 touch to following modes (see also page 10 of this presentation)
Spreadsheet mode:
Use for sending decimal values without unit for further calculation
Text mode:
Use for sending values an on the device display incl. unit for documentation
Keyboard Mode with iOS
How to send data and navigate in a Program
After the devices are connected the favorite keys will change for sending measurement values or navigation
If switched on the Arrow keys on the
DISTO™ can be used for navigation on e.g. Excel
Sends the actual value in the main-line of the
DISTO™ to the current cursor position of any App
Keyboard Mode with iOS
Good to know
If you want to unpair device to prevent automatic detection either switch off
Bluetooth® at
DISTO™ or press „Forget device“ in the settings of the iOS device
When a Leica DISTO™ D810 touch is already paired with one iOS or Windows 8 device it cannot be paired with a second device at the same time, it needs to be unpaired first!
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project