ACT | ACT5 PROX | Product specifications | ACT ACT5 PROX Product specifications

ACT ACT5 PROX Product specifications
ACT supplies Access Control and Door
Entry products to the market. This
catalogue has been put together to provide
a comprehensive overview of all products
available from ACT, both own brand
and third party. It also includes helpful
installation tips and schematics to highlight
how the products work together.
The Access Control products are sold
under the brands standalone, smart and
pro. The standalone products are suited
to doors where the only requirements are
entry and exit. With a variety of features
they offer a low cost access control
solution for both domestic and commercial
properties. The smart range is designed
to be a cost effective and highly flexible
access control system for small to medium
sized commercial buildings and can
operate as standalone or networked. The
Introduction
Innovation and cost effective access control solutions are the corner
stones on which the ACT business has been developed. We are
committed to bringing you secure, robust and aesthetically pleasing
products that fulfil access control requirements for domestic
dwellings, medium size businesses and large scale enterprises
spread over multiple sites.
pro products provide a highly flexible,
scalable access control system designed to
facilitate the most demanding requirements
for any size enterprise.
The Door Entry products are sold under
the Entry brand. Entry products are
designed for both domestic and commercial
properties. They use audio and audio video
over IP to enable the identity of the visitor to
be determined prior to granting access.
ACT offers a high level of product support
through a wide range of ancillary services
including Technical Support, Training,
On Site Support, Tender & Specification
Consultation, Bespoke System Design and
System Integration Solutions.
Eilish Minihane
Marketing Executive, ACT
When Performance Counts
i
Product Name
Description
Page
Index
Standalone Digital Keypads
ACT 10
pin only digital keypad, 10 user codes, 2 user groups, indoor /
outdoor (IP54)
1
ACT 5
surface / flush mount, pin only digital keypad, 10 user codes,
indoor / outdoor (IP67)
1
Digital Keypads & Proximity (125 kHz)
surface / flush mount, pin & proximity digital keypad, 50 user
codes & 50 cards / fobs, indoor / outdoor (IP67)
2
ACT 10 Flush Kit
stainless steel flush mount kits for the ACT 10
3
ACT 10 Weather Shield
stainless steel weather shield cover plate for the ACT 10
3
Flush Mount Plate
fits standard single gang electrical back box , for ACT 5 / 5prox
3
Surface Mount Collar
fits standard single gang electrical back box , for ACT 5 / 5prox
3
ACT 5prox
Keypad Accessories
Proximity Cards & Fobs (125 kHz)
ACT cards and fobs for ACT 5prox
ACT cards and fobs for ACT 5prox
4
accessories for holding or securing your card / fob
5
Cards and Fobs Accessories
Lanyard, Cardholder, Clips, Yo Yo
Cards Printing Bureau Services
Card ID, Card Logo, Card Encoding
When Performance Counts
5
Product Specifications
6
Product Schematics
6
Installation Notes
7
Product Comparisons
ii
personalised and non-personalised printing and the addition of
non standard code to a card
cross reference charts to help you choose the device which
most suits your needs
8
Product Name
Description
Page
Reader / Controller (125 kHz)
ACT RFID proximity reader / controller, master slave /
networkable, 1,000 users, surface / flush, indoor / outdoor
(IP67)
9
ACTsmart2 1080 (Pin & Proximity)
ACT RFID pin & proximity reader / controller, master slave/
networkable, 1,000 users, surface / flush, indoor / outdoor
(IP67)
9
ACTsmart2 1090
pin only reader / controller, master slave / networkable, 1,000
users, surface / flush, indoor / outdoor (IP67)
10
Reader / Controller Accessories
ACTsmart2 Lock
enhances security of ACTsmart2 installations by locating the
relay inside the building
11
Flush Mount Plate
fits standard single gang electrical back box , for ACTsmart2
1070 / 1080 / 1090 and ACT 433RX
11
Surface Mount Collar
fits standard single gang electrical back box , for ACTsmart2
1070 / 1080 / 1090 and ACT 433RX
11
Index
ACTsmart2 1070 (Proximity only)
Reader / Controller Cards & Fobs (125 kHz)
cards & fobs compatible with reader / controller (125 kHz)
12
ACT 433RX Receiver (Long range)
long range receiver that integrates with ACTsmart2, ACTpro-X
and 3rd part systems, surface / flush, indoor / outdoor (IP67)
13
ACT 433TX Transmitter (Long range)
high security rolling code transmission, range of up to 50m (site
dependant)
13
ACT 433TXprox Transmitter (Long range)
built in ACT proximity, high security rolling code transmission,
range of up to 50m (site dependant)
13
accessories for holding or securing your card / fob
14
ACT Cards & Fobs
Radio Receiver & Transmitters
Cards and Fobs Accessories
Lanyard, Cardholder, Clips, Yo Yo
Cards Printing Bureau Services
Card ID, Card Logo, Card Encoding
personalised and non-personalised printing and the addition of
non standard code to a card
14
required for ACTsmart2 software, can control up to 8
ACTsmart2 devices
15
windows software for configuring & monitoring up to 8
ACTsmart2 devices to work in conjunction with ACTsmart2
network controller
15
Network Controller
ACTsmart2 Network Controller
Software
ACTsmart2 Software
16
Product Schematics
17
Installation Notes
21
Product Comparisons
cross reference charts to help you choose the device which
most suits your needs
22
iii
When Performance Counts
Product Specifications
Product Name
Description
Page
Index
Proximity Readers, Accessories and Cards and Fobs (125 kHz)
ACTpro-X 1030 (Proximity only)
multi-format slimline proximity mullion reader, pigtail connection,
mullion mount, indoor/outdoor (IP67)
23
ACTpro-X 1030PM (proximity only)
multi-format proximity reader, panel mount, indoor/outdoor
(IP67)
23
ACTpro-X 1040 (proximity only)
multi-format proximity reader, surface / flush, indoor/outdoor
(IP67)
24
ACTpro-X 1050 (pin & proximity)
pin and multi-format proximity reader, surface / flush, indoor/
outdoor (IP67)
24
ACT Cards & Fobs, HID Cards & Fobs
cards & fobs compatible with proximity readers (125 kHz)
25
Flush Mount Plate
fits standard single gang electrical back box , for ACTpro-X
1040 / 1050 / 1060 and ACT 433RX
27
Surface Mount Collar
fits standard single gang electrical back box , for ACTpro-X
1040 / 1050 / 1060 and ACT 433RX
27
ACTpro-X 1030PM Flush Mount Plate
fits standard single gang electrical back box, stainless steel /
brass
27
ACTpro-X 1030 Vandal Resistant Cover
vandal Resistant cover for ACTpro-X 1030 reader
27
ACTpro-X USB Reader
enable cards on ACTpro-X system at the PC
27
ACTpro-X 1060
pin only reader, surface / flush, indoor / outdoor (IP67)
28
ACTpro 20
pin pad for use with ACT door controllers for Pin Only or Pin
and Card operation with ACT mag swipe and proximity readers,
indoor / outdoor (IP54)
28
Pin only Readers
Magnetic Swipe Reader & Card
ACTpro 1010
magnetic swipe reader, 2 meter pigtail lead, indoor/outdoor
(IP67)
29
Magnetic Swipe Card
swipe card for use with ACTpro 1010, supplied in packs of 10
29
Contactless Smart Card Readers, Accessories and Cards & Fobs (13.54 mHz)
ACTpro mifare 1040
mifare proximity reader, configurable as “Serial”, “Reverse Serial”
or “Sector” reader, surface / flush, indoor / outdoor (IP67)
30
ACTpro mifare 1050
mifare pin and proximity reader, configurable as “Serial”,
“Reverse Serial” or “Sector” reader, surface / flush, indoor /
outdoor (IP67)
30
mifare USB reader
enable cards / fobs and programme sectors on ACTpro mifare
cards
30
HID i class R10
HID contactless smart card reader, mullion mount, indoor /
outdoor
31
HID i class R40
HID contactless smart card reader, indoor / outdoor
31
HID i class RP40
HID contactless smart card reader, indoor / outdoor
31
ACT cards & fobs, HID cards & fobs
cards & fobs compatible with contactless smart card readers
(13.54 mHz)
32
ACT 433RX Receiver
long range receiver, integrates with ACTpro-X, ACTsmart2 and
3rd part systems, surface / flush, indoor / outdoor (IP67)
33
ACT 433TX Transmitter
high security rolling code transmission, range of up to 50m (site
dependant)
33
ACT 433TXprox Transmitter with
proximity
built in ACT proximity, high security rolling code transmission,
range of up to 50m (site dependant)
33
Bio V-Pass FX
fingerprint reader, identification or verification modes
34
Bio V-Prox
fingerprint reader, identification and verification
34
palm reader, standalone / networked, 512 template memory
35
expand memory from standard (512) to 9,728 or 32,912
35
When Performance Counts
Radio Receiver & Transmitters
Biometric Readers
Handkey F
iv
Handkey F memory expansion
Product Name
Description
Page
Cards and Fobs Accessories
Lanyard, Clips, Cardholder, Yo Yo
Accessories for holding or securing your card / fob
36
personalised and non-personalised printing and the addition of non
standard code to a card
36
ACTpro 3000
2 door controller expandable to 16 doors using ACTpro door stations,
built-in TCP/IP to facilitate connection via Ethernet, networkable up to
2,000 doors, 30,000 card holders and 1,000 user groups, programming
is facilitated by an on-board keypad or a PC
37
ACTpro 3000MC
memory expansion device for ACTpro 3000, additional functionality: door
37
ACTpro 2000
2 door controller expandable to 16 doors via ACTpro door stations,
networkable up to 2,000 doors. 20,000 card holders and 1,000 user
groups, programming is facilitated by an on-board keypad or by PC
38
ACTpro 1000
Single door controller, standalone / networkable, up to 10,000 users,
16 user groups, simple LCD menu driven operation, programming is
facilitated by an on-board keypad or by PC
38
ACTpro 100
single door station / expander, max of 14 door stations to each ACTpro
2000/3000 systems, indoor
39
ACTpro 100PCB
PCB only single door station / expander, fits neatly into PSU box, max of
14 door stations to each ACTpro 2000/3000 systems, indoor
39
ACTpro 200
2 door station / expander, built in 3 Amp monitored PSU, max of 7 door
stations (14 additional doors) to each ACTpro 2000/3000
40
8 programmable input / output device, allows an ACTpro 2000/3000 to
be used in applications where signalling to other equipment is required,
up to 4 ACTpro IOMs can be connected to each ACTpro 2000/3000
controller
40
ACTWin Lite
Windows software for configuration and networking. Direct connect
facility for up to 16 doors. Requires network interface for 16 plus doors to
a maximum of 64 doors
41
ACTWin pro
Windows Server Client software for multiple PCs, Card Editor, full Audit
Trail with enhanced database including all ACTWin version 2 features.
Two workstations included
41
ACTWin pro Workstation
Additional Operator Workstation
42
ACTWin pro Multi-Tenant
system partition for simpler administration, define up to 200 separate
tenants
42
ACTWin pro Time & Attendance
audit trail, employee time and attendance calculations, absentees report,
holiday management
42
Card ID, Card Logo, Card Encoding
Door Controllers
Index
Card Printing Bureau Services
plan, extra user rights, distributed intelligence
Door Stations
Modules
ACTpro IOM
Software
Network & Communication Devices
TCP/IP unit to facilitate connection of ACTpro 1000/2000 controllers to
LAN
43
ACT Single Channel Interface
single channel RS232 to RS485 interface, RS232 to RS485 converter
43
ACT 4 Channel Interface
4 channel RS232 to RS485 network interface, RS232 input with 4 x
RS485 outputs
43
Product Specifications
44
Product Schematics
46
Installation Notes
51
Product Comparisons
53
v
When Performance Counts
ACT Lan
Product Name
Description
Page
Index
Audio Video over IP Door Entry
ACTentry V-IP Kit
audio video over IP door entry kit including door entry panel,
control unit, handset, PSU, software and manual. ACTpro-X
1030PM is an optional extra for access control
56
ACTentry V-IP Door Entry Panel
surface / flush mount, audio video door entry over TCP / IP,
connect unlimited PC’s and grant / deny building access from
PC, integrated day / night colour video camera, call button and
speech unit, optional proximity with ACTpro-X 1030PM, indoor
/ outdoor (IP54)
56
ACTentry V-IP Control Unit
ethernet interface unit that converts video and audio signals
from door entry panel to TCP/IP data
57
ACTentry V-IP Software
unlimited users, grant / deny access, set door open and call
answer times
57
ACTentry V-IP Handset
plug into PC for use with ACTentry V-IP
58
ACTentry 1 Amp Power Supply
power supply unit for ACTentry systems
58
ACTpro-X 1030PM Reader
panel mount, multi-format proximity reader, can be integrated
into the door entry panel
58
When Performance Counts
Audio Door Entry with Access Control
vi
ACTentry A10 Kit
audio door entry and access control kit including door entry
panel, handset and power supply unit
59
ACTentry A10 Door Entry Panel
surface / flush mount, audio door entry and pin code access
control, connect up to 4 door intercom handsets, incorporates
call button, speech unit and ACT 10 digital keypad, indoor /
outdoor (IP54)
59
ACTentry A10 Door Intercom Handset
internal handset for use with ACTentry A10
60
ACTentry 1 Amp Power Supply
power supply unit for ACTentry systems
60
Product Specifications
61
Product Schematics
62
Installation Notes
63
Customer Service
65
Appendix
69
Standalone Digital Keypads
ACT 10 Digital Keypad
Features
■■  pin only digital keypad
■■  10 user codes
■■  2 user groups
■■  push to exit input
■■  incorrect code lockout
■■  door monitoring / contact input
■■  tamper output
■■  fire alarm override
■■  interlock
■■  toggle mode
■■  12 - 24 Volt AC / DC supply
■■  2 x 5 amp, 30 Volt DC relays
■■  2 x 100 mA Darlington Driver outputs
■■  zinc diecast housing, stainless steel keys
■■  keypad backlighting
■■  indoor / outdoor (IP54)
Product CodeACT 10
Related Products
(includes digital keypad, 2 varistors & manual)
ACT 10 Flush Kit p3
ACT 10 Weather Shield p 3
ACT 5 Digital Keypad
Features
Product CodeACT 5
(includes digital keypad, flush mount plate, surface mount
collar, 1 varistor & manual)
1
When Performance Counts
■■  pin only digital keypad
■■  10 user codes
■■  push to exit input
■■  incorrect code lockout
■■  toggle mode
■■  5 amp, 30 Volt DC relay
■■  polycarbonate housing, stainless steel keys
■■  keypad backlighting
■■  potted electronics
■■  indoor / outdoor (IP67)
■■  surface / flush mount options
■■  mounts on to standard single gang
electrical back box
Digital Keypad + Proximity (125 kHz)
ACT 5prox Pin & Proximity
Features
■■  pin & proximity digital keypad
■■  50 user codes & 50 cards / fobs
■■  push to exit input
■■  incorrect code lockout
■■  toggle mode
■■  5 amp, 30 Volt DC relay
■■  polycarbonate housing with stainless steel keys
■■  keypad backlighting
■■  potted electronics
■■  indoor / outdoor (IP67)
■■  surface / flush mount options
■■  mounts on to standard single gang
electrical back box
Product CodeACT 5prox
(includes digital keypad, flush mount plate,
surface mount collar, 1 varistor & manual)
For use with ACT 5prox
When Performance Counts
for a full list of ACT cards
& fobs see page 4
2
Keypad Accessories
ACT 10 Flush Kit
Features
■■  Stainless steel flush mount kit for the ACT
10 digital keypad
Product Code
ACT 10FK
ACT 10 Weather Shield
Features
■■  Stainless steel weather shield cover plate for
the ACT 10 digital keypad
Product Code
ACT 10WS
Flush Mount Plate
Surface Mount Collar
Features
Features
■■  flush mount plate for the ACT 5 / 5prox
■■  fits standard single gang electrical back box
■■  surface mount collar for the ACT 5 / 5prox
■■  fits standard single gang electrical back box
Product Code
Product Code
included with device
included with device
When Performance Counts
3
Proximity Cards & Fobs (125 kHz)
ACTProx Fob
Features
■■  ACT proximity key fob
■■  max range of up to 8cm
■■  extremely robust
■■  supplied in pack of 10
Product Code
ACTProx Fob-B
ACTProx ISO Card
Features
■■  ACT ISO proximity card
■■  suitable for printing
■■  max range of up to 8cm
■■  supplied in pack of 10
Product CodeACTProx ISO-B
ACTProx HS Card
Features
■■  ACT half shell proximity card
■■  not suitable for printing
■■  max range of up to 8cm
■■  extremely durable
■■  supplied in pack of 10
Product CodeACTProx HS-B
When Performance Counts
ACTProx Duo
Features
■■  ACT Duo proximity card (prox &
mag stripe)
■■  suitable for printing
■■  max range of up to 8cm
■■  supplied in pack of 10
4
Product Code
ACTProx Duo-B
Cards & Fobs Accessories
Lanyard
Clips
Features
Features
■■  use with ACT cardholder to secure
card around the neck
■■  quick safety release clip
■■  use with the ACT cardholder to
secure card to clothing
Product Code
ACT Clip
Product CodeACT Lanyard
Cardholder
Yo Yo
Features
Features
■■  plastic holder for cards
■■  attach to lanyard or clip
■■  Elasticated holder for cards and
fobs
Product Code
Product Code
ACT Cardholder
ACT YO-YO
Card Printing Bureau Services
Card Logo
Encoding
Features
Features
Features
■■  personalised printing
e.g. employee name,
photo, department, etc
■■  non-personalised printing
e.g. company logo,
address, phone, etc.
■■  to add non standard
encoding to a card
Product Code ACT ID
Product Code ACT Logo
Product Code Encoding
5
When Performance Counts
Card ID
Product Specification
ACT 10
(Pin only)
ACT 5
(Pin only)
ACT 5prox
(Pin & Prox)
Operating Voltage
12 - 24 Volts AC / DC
12 - 24 Volts AC / DC
12 - 24 Volts AC / DC
Current Consumption
40 / 120 mA
30 / 120 mA
60 / 100 mA
Output Current Sink
100 mA
n/a
n/a
Operating Temperature
- 10 to + 50 º C
- 10 to + 50 º C
- 10 to + 50 º C
Door Open Time
0 - 255 seconds
0 - 255 seconds
0 - 255 seconds
Relay Contact Rating
2 x 5A / 30 Volt
5A / 30 Volt
5A / 30 Volt
Weight
633 gms
150 gms
166 gms
Dimensions
(H x W x D, mm)
138 x 87 x 37
100 x 110 x 35
100 x 110 x 35
Mounting
surface / flush options surface / flush
surface / flush
Installation
indoor / outdoor
(IP54)
indoor / outdoor
(IP67)
indoor / outdoor
(IP67)
Construction
zinc diecast housing,
stainless steel keys
rugged polycarbonate housing, stainless steel
keys, potted electronics
Product Schematics
When Performance Counts
ACT 10 Digital Keypad
6
Product Schematics
cont’d
ACT 5 / 5prox
Installation Notes
ACT 5 / ACT 5prox
■■  The ACT 5 / 5prox require operating voltage of 12 - 24 volts AC or DC
■■  5 amp lock output
■■  Indoor / outdoor installation (IP67)
■■  Operating Temperature: -10 to +50 C
■■  The ACT 5 / 5prox can be surface or flush mounted
ACT 10
7
When Performance Counts
■■  The ACT10 requires an operating voltage of 12 - 24 volts AC or DC
■■  2 x 5amp relay outputs
■■  Indoor / outdoor installation (IP54)
■■  Operating Temperature: -10 to +50 C
■■  For full functionality use a 12 Volt DC power source
Product Comparisons
Please use these cross refernce charts to help you choose
the device which most suits your needs.
ACT 10
(Pin only)
ACT 5
(Pin only)
ACT 5prox
(Pin & Prox)
Doors
2
1
1
Users
10
10
50
User Groups
1
5 amp
5 amp
IP67
IP67
Pin Only
Pin & Card
Pin or Card
Card Only
Keypad Backlighting
Push to exit
Door Monitoring
Fire Alarm Override
Interlock
Toggle Mode
Door Relay Output
5 amp
Programmable Inputs
2
Programmable Outputs
2
Push to release button
input
Tamper Output
12 - 24 Volt DC or AC input
IP Rating
Door Forced / Door Ajar
Change Relay Timer
When Performance Counts
Duress Code
8
IP54
Reader / Controller (125 kHz)
ACTsmart2 1070 Proximity
Features
■■  proximity reader / controller
■■  1,000 users
■■  standalone / master slave /
networkable
■■  programmable inputs/outputs:
push to exit, door monitoring / door
contact, door alarm (ajar / forced),
fire alarm override, interlock
■■  tamper output
■■  5 amp, 30 Volt DC relay
■■  smartlock option for added security
(see p 11)
■■  robust polycarbonate housing
■■  indoor / outdoor (IP67)
■■  surface / flush mount options
For a full list of ACT cards
■■  mounts on standard single gang
and fobs see p 12
electrical back box
■■  can be programmed using
1. a programming card
(standalone, see p 12)
2. the master keypad (master
Product CodeACTsmart2 1070
slave, see p 17)
(includes reader / controller, flush mount
3. ACTWin smart software
plate, surface mount collar, 1 varistor &
(network, see p 18)
manual)
ACTsmart2 1080 Pin & Proximity
Features
9
When Performance Counts
■■  pin & proximity reader / controller
■■  1,000 users (500 if pin & prox)
■■  standalone / master slave /
networkable
■■  programmable inputs/outputs:
push to exit, door monitoring / door
contact, door alarm (ajar / forced),
fire alarm override, interlock
■■  tamper output
■■  5 amp, 30 Volt DC relay
■■  smartlock option for added security
(see p 11)
■■  robust polycarbonate housing,
stainless steel keys
■■  keypad backlighting
■■  indoor / outdoor (IP67)
■■  surface / flush mount options
■■  mounts on standard single gang
Product CodeACTsmart2 1080
electrical back box
■■  can be programmed using
(includes reader / controller, flush mount plate,
1. a programming card
surface mount collar, 1 varistor & manual)
(standalone, see p 12)
2. the master keypad (master
slave, see p 17)
3. ACTWin smart software
(network, see p 18)
Readers / Controller
ACTsmart2 1090 PIN
Features
■■  pin reader / controller
■■  1,000 users
■■  standalone / master slave /
networkable
■■  programmable inputs/outputs: push
to exit, door monitoring / door
contact, door alarm (ajar / forced),
fire alarm override, interlock
■■  tamper output
■■  5 amp, 30 Volt DC relay
■■  smartlock option for added security
(see p 11)
■■  polycarbonate housing, stainless
steel keys
■■  keypad backlighting
■■  indoor/outdoor (IP67)
■■  surface / flush mount options
■■  mounts on standard single gang
electrical back box
■■  can be programmed using
Related Products
1. a programming card
HIDsmart reader / controllers are also available.
(standalone, see p 12)
Ask Sales for further information.
2. the master keypad (master
slave, see p 17)
3. ACTWin smart software
(network, see p 18)
Product CodeACTsmart2 1090
When Performance Counts
(includes keypad, flush mount plate, surface
mount collar, 1 varistor & manual)
10
Reader / Controller Accessories
ACTsmart2 Lock
Features
■■  enhances security of ACTsmart2 installations by locating the relay inside the building (typically in PSU)
■■  relay only operated when a
valid card / pin is presented to
ACTsmart2 reader
■■  Led status indicator
■■  for more details see p 19
Product CodeACT smart2 Lock
Flush Mount
Plate
Surface Mount
Collar
Features
Features
■■  flush mount plate for ACTsmart2
readers
■■  fits standard single gang electrical
back box
■■  surface mount collar for ACTsmart2
readers
■■  fits standard single gang electrical
back box
Product Codeincluded with
device
Product Codeincluded with
device
When Performance Counts
11
Reader / Controller Cards & Fobs
(125 kHz)
ACTProx Fob
Features
■■  ACT proximity key fob
■■  max range of up to 8cm
■■  extremely robust
■■  supplied in pack of 10
Product Code
ACTProx Fob-B
ACTProx ISO Card
Features
■■  ACT ISO proximity card
■■  suitable for printing
■■  max range of up to 8cm
■■  supplied in pack of 10
Product CodeACTProx ISO-B
ACTProx HS Card
Features
■■  ACT half shell proximity card
■■  not suitable for printing
■■  max range of up to 8cm
■■  extremely durable
■■  supplied in pack of 10
When Performance Counts
Product CodeACTProx HS-B
ACTProx Duo
Features
12
■■  ACT Duo proximity card (proximity &
mag stripe)
■■  suitable for printing
■■  max range of up to 8cm
■■  supplied in pack of 10
Product Code
ACTProx Duo-B
Radio Receiver
ACT 433RX Long Range Receiver
Features
■■  integrates with ACTsmart2 and
ACTpro-X readers
■■  integrates with 3rd party systems
■■  range of up to 50 m (site
dependant)
■■  2 channel receiver
■■  supports “Clock & Data” and
“37 bit Wiegand” output
■■  5 - 12 Volt DC
■■  polycarbonate housing
■■  indoor / outdoor (IP67)
■■  surface / flush mount options
■■  mounts on standard single gang
electrical back box
Product CodeACT 433RX
(includes long range receiver, flush mount
plate, surface mount collar & manual)
Radio Transmitters
ACT 433TX
Features
■■ high security rolling code transmission
■■ range of up to 50m (site dependant)
■■ 2 button battery powered radio devices
■■ battery used: two CR2032
Product CodeACT 433TX
Features
■■ all the functions of the ACT 433TX
■■ built in ACT proximity fob for use with ACTsmart2 & ACTpro-X readers
Product Code
ACT 433TXprox
13
When Performance Counts
ACT 433TXprox
Cards & Fobs Accessories
Lanyard
Clips
Features
Features
■■  use with ACT cardholder to secure
card around the neck
■■  quick safety release clip
■■  use with the ACT cardholder to
secure card to clothing
Product Code
ACT Clip
Product CodeACT Lanyard
Cardholder
Yo Yo
Features
Features
■■  plastic holder for cards
■■  attach to lanyard or clip
■■  Elasticated holder for cards and
fobs
Product Code
Product Code
ACT Cardholder
ACT YO-YO
When Performance Counts
Card Printing Bureau Services
14
Card ID
Card Logo
Encoding
Features
Features
Features
■■  personalised printing
e.g. employee name,
photo, department, etc
■■  non-personalised printing
e.g. company logo,
address, phone, etc.
■■  to add non standard
encoding to a card
Product Code ACT ID
Product Code ACT Logo
Product Code Encoding
Network Controller
ACTsmart2 Network Controller
Features
■■  required for ACTsmart2 software
■■  can control up to 8 ACTsmart2
devices
■■  1000 users
■■  16 User groups
■■  1000 log events
■■  12 Volt DC
■■  polycarbonate housing
■■  LED indicators
■■  indoor only
Product CodeACTsmart2
Controller
(includes network controller, software. serial
lead & manual)
Software
ACTsmart2 Software
Features
Product CodeACTsmart2
Software
Only operates with ACTsmart2 systems
Minimum PC Specification for
ACTsmart2 Software
■■  Windows 2000, XP, 2003, Vista
■■  Pentium II (300Mhz or better)
■■  RAM: 512Mb or better
■■  CD-ROM Drive
■■  1 serial port
15
When Performance Counts
■■  windows software for configuring
& monitoring up to 8 ACTsmart2
devices to work in conjunction with
ACTsmart2 network controller
■■  16 user groups
■■  up to 4 time zones per user group
to a max of 16
■■  100,000 event log
■■  access control reports
■■  password protection
■■  upload facility
■■  photo ID for each user
■■  built-in translator
■■  software and serial lead supplied
with ACTsmart2 network controller
■■  Windows XP & Vista compatible
Product Specificatons
ACTsmart2 1070 / 1080 / 1090 Reader / Controller
Operating Voltage
12 - 24 Volt AC or DC
Current Consumption
60 / 100 mA
Output Current Sink
100 mA
Operating Temperature
-25 to +60ºC
Door Open Time
0 – 255 seconds
Programmable Inputs
1
Programmable Inputs/Outputs
2
Relay Contact Rating
5 amp / 30 Volts
Size (H x W x D, mm) 100 x 110 x 35
Weight
173 grams
Mounting
surface / flush mount options
Installation
indoor / outdoor (IP67)
Constructionrugged polycarbonate housing,
stainless steel keys, potted
electronics in the 1080 / 1090
ACTsmart2 per network (max)
8
Length of Network (max)
1.4 km
ACT 433RX Receiver
Operating Frequency
Modulation
Supply Voltage
Current Consumption
Range in free space (max)
Operating Temperature
Dimensions (HxWxDmm)
Weight
433.92 MHz
FSK
5 Volts or 12 Volts
60mA
up to 50 metres
-20 to +70°C
109 x 100 x 24
106 gms
When Performance Counts
ACT 433TX & TXprox Transmitters
16
Operating Frequency
Modulation
Supply Voltage
Current Consumption
Range in free space (max)
Operating Temperature
Dimensions (H x W x D, mm)
Weight
E.R.P
Batteries
Battery Life
Transmission period
Transmission duration
433.92 MHz
FSK
6 Volts
4mA
up to 50 metres
-20 to +70°C
71.5 x 42.5 x 16
20 grams
5uW
Two CR2032
up t o 2 years
2.3 seconds
7 m seconds
Product Schematics
ACTsmart2 Standalone Reader / Controller
ACTsmart2 1080 Master Slave Configuration
To
Network Type
Cable Type*
Comments
Master ACTsmart
keypad/controller
ACTsmart keypad/
controller
RS485
Screen twisted pair
(STP) equivalent
to Belden 9501 or
shielded Cat 5.
Maximum
distance 1.4
km
* Note: If using UTP (Unshielded Twisted Pair) such as Cat 5 please ensure that the cable is
not located near sources of electrical noise.
17
When Performance Counts
From
ACTsmart2 Network Configuration
From
To
PC
ACTsmart controller RS232
ACTsmart controller ACTsmart keypad/
controller(s)
Network Type
RS485
Cable Type*
Comments
Screen twisted pair
(STP)
Max distance
20m approx
Screen twisted pair
(STP) equivalent
to Belden 9501 or
shielded Cat5.
Max distance
1.4 km
When Performance Counts
* Note: If using UTP (Unshielded Twisted Pair) such as Cat 5 please ensure that the cable is
not located near sources of electrical noise.
18
ACTsmart2 Keypad / Controller with Smartlock
The use of the ACT Smartlock with the
ACTsmart2 reader / controller will enhance
the physical security by placing the lock
relay in a more secure location, such as
within a PSU that has tamper outputs.
The ACTsmart2 keypad / controller is
installed on the unsecure side of the entry
point and the Smartlock is installed on the
secured side.
From
To
Network Type
Cable Type
Comments
ACTsmart keypad/
controller
ACT smart Lock
ACT protocol
Twisted Screen Pair
Max distance
30m
ACTsmart2 1090 with ACTpro-X 1030 Reader
ACTsmart2 1090 with ACTpro-X 1030 Reader
The ACTsmart 2 1090
keypad
/ controller
The ACTsmart
2 1090
keypad can
/ controller
operate
in conjunction
with
can operate
in conjunction
with any
of the
of the
ACTpro-X
family
ACTpro-Xany
family
of readers
to enhance
of readers
to enhance
physical security
by protecting
the lock
physical security by protectrelay from tampering. The ACTsmart2 1090
ing the lock relay from
keypad / controller is installed on the secure
tampering. The ACTsmart2
side of the1090
entrykeypad
point and
the ACTpro-X
/ controller
is
reader is installed
on
the
unsecured
side.
installed on the secure side
PSU
12 Volt DC
Network
Tamper
2 Inputs / Outputs
(100mA)
smart
of the entry point and the
ACTpro-X reader is installed
on the unsecured side.
EXIT
ACTsmart2 1090
From
To
Network Type
Cable Type
Comments
ACTsmart controller
ACTpro-X reader
ACT protocol
8 core Screen
Max distance
100m
19
When Performance Counts
Note: for full functionality
use 12 volts DC only
ACTpro-X 1030 or any
ACTpro-X Reader
When Performance Counts
ACTsmart2 with ACT 433RX Long Range Reader
20
Installation Notes
Readers
ACTsmart2 1070 (RFID Prox only)
ACTsmart2 1080 (Pin and RFID prox)
ACTsmart2 1090 (PIN only)
■■  May be installed in exposed outdoor
conditions (IP67)
■■  If the electronic outputs and inputs are
to be used, or the master slave feature is
required, ensure a DC supply to all units
■■  As there are up to 1,000 users available
on the ACTsmart2 devices, the system
administrator should keep good records
to enable efficient addition and deletion
of users
■■  When using the master slave option
ensure that there is at least one
ACTsmart2 1080 device when proximity
is being used.
Controller
ACTsmart2 Controller
Smart Lock
ACTsmart2 Lock
■■  The ACTsmart2 controller is used when
connecting the the ACTsmart readers/
controller to a PC running the ACTSmart
software.
■■  The ACTsmart2 controller will support a
maximum of 8 access points.
■■  The maximum network cabling distance
from the ACTsmart controller to the last
ACTsmart readers/controller is 1.4 km of
twisted screen pair or category 5
■■  The ACTsmart2 controller can only be
connect to the PC via a serial (RS232)
cable.
21
When Performance Counts
■■  Maximum distance of Data Line from
ACTSmart2 Lock to ACTSmart2 device:
30 metres
■■  ACT recommends installing the
ACTSmart2 Lock inside the power
supply unit.
Product Comparisons
Please use these cross refernce charts to help you choose
the device which most suits your needs.
ACTsmart2 1070
(Prox only)
ACTsmart2 1080
(Pin & Prox)
ACTsmart2 1090
(Pin only)
Doors
1
1
1
Users
1000
1000
(500 Pin & Card)
1000
1
1
1
5 amp
5 amp
5 amp
Programmable Inputs
1
1
1
Programmable Inputs/
Outputs
2
2
2
IP67
IP67
IP67
ACTWin Smart
ACTWin Smart
ACTWin Smart
User Groups*
Pin Only
Pin & Card
Pin or Card
Card Only
Keypad Backlighting
Interlock
Door Monitoring**
Fire Alarm Override
Toggle Mode
Door Relay Output
Push to release input**
Tamper Output
12 - 24 Volt DC or AC**
IP Rating
Door Forced / Door Ajar
Smartlock
Standalone Operation
Master Slave Operation
PC Aplication
When Performance Counts
Change Relay Timer
Duress Code
* ACTsmart2 software can have up to 16 User groups, with each User group having 4 different Time zones (max of 16)
** For full functionality use 12 Volt DC
ACT recommend that the ACT smart 1070 not be used as a standalone reader for large systems incase the cards need
to be reentered.
22
Proximity Readers (125 kHz)
ACTpro-x 1030
Features
■■  multi-format slimline proximity
mullion reader
■■  ACTProx cards and fobs supported
■■  HID cards and fobs supported
■■  “Clock & Data” or “Wiegand”
Output
■■  tri-colour LED indication
■■  built-in bleep tone for audible
indications
■■  2 meter pigtail lead
■■  robust polycarbonate housing
■■  potted electronics
■■  indoor / outdoor (IP67)
Product Code
ACTpro-X 1030
(includes reader & manual)
Related Products
ACTpro-X 1030 Vandal
Resistant Cover (p 27)
ACTpro-x 1030PM
Features
Related Products
Product Code
ACTpro-X 1030PM
(includes reader & manual)
ACTpro-X 1030PM
Flush Plate (p 27)
23
When Performance Counts
■■  multi-format panel mount proximity
reader
■■  ACTProx cards and fobs supported
■■  HID cards and fobs supported
■■  “Clock & Data” or “Wiegand”
Output
■■  tri-colour LED indication
■■  built-in bleep tone for audible
indications
■■  robust polycarbonate front plate
■■  potted electronics
■■  indoor / outdoor (IP67)
■■  mounts on standard single gang
electrical back box
■■  mounts into ACTentry V-IP and
industry standard audio video panels
Proximity Readers (contd.) (125 kHz)
ACTpro-x 1040
Features
■■  multi-format proximity only reader
■■  ACTProx cards and fobs supported
■■  HID cards and fobs supported
■■  “Clock & Data” or “Wiegand”
Output
■■  tri-colour LED indication
■■  built-in bleep tone for audible
indications
■■  robust polycarbonate housing
■■  potted electronics
■■  indoor / outdoor (IP67)
■■  surface / flush
■■  mounts on standard single gang
electrical back box
Product CodeACTpro-X 1040
(includes reader, flush mount plate, surface
mount collar & manual)
ACTpro-x 1050
When Performance Counts
Features
■■  multi-format pin & proximity reader
■■  ACTProx cards and fobs supported
■■  HID cards and fobs supported
■■  “Clock & Data” or “Wiegand”
Output
■■  tri-colour LED indication
■■  built-in bleep tone for audible
indications
■■  robust polycarbonate housing
■■  keypad backlighting (on request)
■■  potted electronics
■■  indoor / outdoor (IP67)
■■  surface / flush
■■  mounts on standard single gang
electrical back box
Product Code
ACTpro-X 1050
(includes reader, flush mount plate, surface
mount collar & manual)
24
Proximity Cards & Fobs (125 kHz)
ACTProx Fob
Features
■■  ACT proximity key fob
■■  max range of up to 8cm
■■  extremely robust
■■  supplied in pack of 10
Product Code
ACTProx
ISO Card
Features
■■  ACT ISO proximity card
■■  suitable for printing
■■  max range of up to 8cm
■■  supplied in pack of 10
ACTProx Fob-B
Product CodeACTProx ISO-B
All ACT and HID cards & fobs are batch
HID cards and fobs can be encoded with a
coded by default. ACT recommends using
unique site code. When ordering subsequent
batch cards for simpler system enrollment.
cards & fobs this site code is required. Site
codes cards & fobs have a 2 week lead time.
ACTProx
HS Card
ACTProx
Duo Card
Features
Features
■■  ACT half shell proximity card
■■  not suitable for printing
■■  max range of up to 8cm
■■  supplied in pack of 10
■■  ACT Duo Prox Card (prox & mag
stripe)
■■  suitable for printing
■■  max range of up to 8cm
■■  supplied in pack of 10
Product Code
ACTProx Duo-B
25
When Performance Counts
Product CodeACTProx HS-B
Proximity Cards & Fobs (125 kHz)
HIDProx Fob
Features
■■ HID RFID proximity key box
■■ max range of up to 6 cm
■■  supplied in pack of 10 (batch)
Product CodeHIDProx Fob-B (batch)
HIDProx ISO Card
Features
■■ HID RFID ISO proximity card
■■ max range of up to 8 cm
■■  suitable for printing
■■  supplied in pack of 10 (batch)
Product Code
HIDProx ISO-B (batch)
HIDProx HS Card
Features
■■  HID RFID Card 11 (half shell proximity card),
■■ max range of up to 8 cm
■■  not suitable for printing
■■  supplied in pack of 10 (batch)
Product Code
HIDProx HS-B (batch)
HIDProx Duo Card
Features
■■ HID RFID proximity & mag stripe card
■■ max range of up to 8 cm
■■  suitable for printing
■■  supplied in pack of 10 (batch)
When Performance Counts
Product Code
HIDProx Duo-B (batch)
Micro Prox Tag
Features
26
■■ HID RFID adhesive proximity tag
■■ max range of up to 8 cm
■■ not suitable for printing
■■  supplied in pack of 10 (batch)
Product CodeHID Micro Prox
Proximity Reader Accessories
Flush Mount Plate
Features
■■  flush mount plate for ACTpro-X
1040 / 1050 / 1060
■■  fits standard single gang electrical
back box
Product Code
included with device
Surface Mount
Collar
Features
■■  surface mount collar for ACTpro-X
1040 / 1050 / 1060
■■  fits standard single gang electrical
back box
Product Code
included with device
ACTpro-X 1030PM Flush Plate
Features
■■  flush plate for the ACTpro-X 1030OM
■■  stainless steel / brass
■■  fits standard single gang electrical back box
Product Code
ACTpro-X 1030PM Flush Plate
ACTpro-X 1030 Vandal Resistant Cover
Features
■■  vandal resistant cover for ACTpro-X 1030
Product Code
ACTpro-X 1030VR
Features
■■  enable cards / fobs on ACTpro-X systems at the PC
(ACTWin pro 2.2 and later)
■■  read RFID proximity card (125 kHz)
■■  cradle slot design to accept RFID card
27
Product CodeACTpro-X USB Reader
When Performance Counts
ACTpro-X USB Reader
PIN Only Reader
ACTpro-x 1060
Features
■■  Pin only reader
■■  Potted electronics
■■  “Clock & Data” or “Wiegand” output
■■  Tri colour LED indications
■■  bleep tone for audible indications
■■  robust polycarbonate housing
■■  indoor / outdoor (IP67)
■■  surface / flush
■■  mounts on standard single gang
electrical back box
Product CodeACTpro-X 1060
(includes reader, flush mount plate, surface
mount collar & manual)
ACTpro 20
Features
■■  pinpad for pin only use
■■  commonly used in conjunction with ACTpro 1010 for pin and swipe
■■  LED indications
■■  vandal resistant zinc diecast
housing
■■  keypad backlighting
■■  indoor or outdoor (IP54)
Product Code
ACTpro 20
When Performance Counts
(includes pin pad, 1 varistor & manual)
28
Magnetic Swipe Reader
ACTpro 1010
Features
■■  track 2 magnetic swipe reader
■■  “Clock & Data” output
■■  Bi colour LED indications
■■  2 meter pigtail lead
■■  vandal resistant zinc diecast
housing
■■  potted electronics
■■  indoor or outdoor (IP67)
Product CodeACTpro 1010
(includes reader & manual)
Magnetic Swipe Card
ACT Card
Features
■■  swipe card (magnetic strip)
■■  suitable for printing
■■  ACT logo as standard (blank on
request)
■■  supplied in packs of 10
Product Code
ACT Card-B (Batch)
When Performance Counts
29
Contactless Smart Card Readers
(13.56 MHz)
ACTpro mifare 1040
Features
■■  proximity only mifare reader
■■  configurable as “Serial”, “Reverse Serial” or “Sector”
reader
■■  default to read from sector 1
■■  3rd party mifare cards & fobs supported
■■  tri-colour LED indication
■■  built-in bleep tone for audible indications
■■  robust polycarbonate housing
■■  indoor / outdoor (IP67)
■■  surface / flush mount options
■■  mounts on standard single gang electrical back box
Product Code ACTpro mifare 1040
(includes reader, flush mount plate, surface mount collar & manual)
ACTpro mifare 1050
Features
■■  pin & proximity mifare reader
■■  configurable as “Serial”, “Reverse Serial” or “Sector”
reader
■■  default to read from sector 1
■■  3rd party mifare cards & fobs supported
■■  tri-colour LED indication
■■  built-in bleep tone for audible indications
■■  robust polycarbonate housing
■■  indoor / outdoor (IP67)
■■  surface / flush mount options
■■  mounts on standard single gang electrical back box
Product CodeACTpro mifare 1050
When Performance Counts
(includes reader, flush mount plate, surface mount collar & manual)
ACTpro mifare USB Reader
Features
30
■■  enable cards / fobs and programme sectors on ACTpro mifare cards
■■  13.56 MHz frequency
■■  fast data transfer
■■  high data integrity
Product CodeACTpro mifare USB Reader
Contactless Smart Card Readers
(contd.) (13.56 MHz)
HID iClass R10 Reader
Features
■■  proximity contactless smartcard
reader
■■  “Clock & Data” or “Wiegand” output
■■  polycarbonate housing
■■  indoor / outdoor
■■  mullion mount
■■  12 Volt DC
Product CodeHID i class R10
HID iClass R40 Reader
Features
■■  proximity contactless smartcard
reader
■■  “Clock & Data” or “Wiegand” output
■■  polycarbonate housing
■■  indoor / outdoor
■■  mounts on single gang back box
■■  12 Volt DC
Product CodeHID i class R40
HID iClass RP40 Reader
Features
Product Code
HID I class RP40
31
When Performance Counts
■■  proximity contactless smartcard
reader
■■  “Clock & Data” or “Wiegand” output
■■  polycarbonate housing
■■  indoor / outdoor
■■  mounts on single gang back box
■■  12 Volt DC supply
Contactless Smart Card
Cards & Fobs (13.56 MHz)
ACTpro mifare Fob
Features
■■ for use with ACTpro mifare 1040 / 1050
■■ proximity mifare IKB fob
■■ max range of 3cm
■■ not suitable for printing
■■ supplied in packs of 10
Product CodeACTpro mifare 1KB Fob
ACTpro mifare Card
Features
■■ for use with ACTpro mifare 1040 / 1050
■■ prox mifare 1KB card (prox & mag stripe)
■■ max range of 5cm
■■ suitable for printing
■■ supplied in packs of 10
Product CodeACTpro mifare 1KB Card
HID iClass cards
Features
■■ for use with HID iClass Readers
■■ suitable for printing
■■ max range of 5cm
When Performance Counts
Product CodeHID i class 2k card
HID i class 16k card
HID mifare 1431
Features
■■ for use with HID iClass Readers
■■  prox mifare 1KB card (prox & mag stripe)
■■ suitable for printing
■■  max range of 5cm
32
Product Code
HID mifare 1431
Radio Receiver
ACT433 RX Long Range Receiver
Features
■■  integrates with ACTpro-X and ACTsmart2 readers
■■  integrates with 3rd party systems
■■  range of up to 50m (site dependant)
■■  2 channel receiver
■■  supports “Clock & Data” and
“Wiegand” output
■■  5 - 12 Volt DC
■■  polycarbonate housing
■■  indoor / outdoor (IP67)
■■  surface / flush mount options
■■  mounts on standard single gang electrical back box
Product Code
ACT 433RX
(includes ACT 433RX receiver, flush mount
plate, surface mount collar and product
manual)
Radio Transmitters
ACT 433TX
Features
■■ high security rolling code transmission
■■ range of up to 50m (site dependant)
■■ 2 button battery powered radio devices
■■ battery used: two CR2032
Product CodeACT 433TX
Features
■■ all the functions of the ACT 433TX
■■ built in ACT proximity fob for use with ACTsmart2 & ACTpro-X readers
Product Code
ACT 433TXprox
33
When Performance Counts
ACT 433TXprox
Biometric Reader
Bio V-Pass FX
Features
■■  Identification or Verification modes
■■  500 fingerprint templates
(identification mode) or 4000
fingerprint templates (verification
mode when used with the
ACTpro-X 1060
■■  software assists template
management and reader
configuration
■■  simple one touch enrolment
■■  user interface gives feedback via
multi coloured LED and bleep tone
signals
Product CodeBio V-Pass FX
Bio V-Prox
Features
■■  Identification & Verification
(Biometric & integrated Proximity
Reader)
■■  4000 fingerprint templates
■■  Software assists template
management and reader
configuration
■■  Simple one touch enrolment
■■  User interface provides feedback via
multi coloured LED and tone signals
When Performance Counts
Product CodeBio V-Prox
34
Handkey F
Features
■■  standalone / networked
■■  over 500 user templates
■■  integrated keypad
■■  card reader input
■■  fast enrolment & deletion of users
■■  tamper switch
■■  Integrated wall mount design
Product CodeING Palm Reader
Handkey Memory
Expansion
Handkey Memory
Expansion
Features
Features
■■  memory expansion from 512
(standard) to 9, 728
■■  memory expansion from
512(standard) to 32,912 users
Product Code Product Code (up to 9,728 users)
ING Memory Expansion (9,728)
(up to 32, 912 users)
ING Memory Expansion (32,912)
When Performance Counts
35
Cards & Fobs Accessories
Lanyard
Clips
Features
Features
■■  use with ACT cardholder to secure
card around the neck
■■  quick safety release clip
■■  use with the ACT cardholder to
secure card to clothing
Product Code
ACT Clip
Product CodeACT Lanyard
Cardholder
Yo Yo
Features
Features
■■  plastic holder for cards
■■  attach to lanyard or clip
■■  Elasticated holder for cards and
fobs
Product Code
Product Code
ACT Cardholder
ACT YO-YO
When Performance Counts
Card Printing Bureau Services
36
Card ID
Card Logo
Encoding
Features
Features
Features
■■  personalised printing
e.g. employee name,
photo, department, etc
■■  non-personalised printing
e.g. company logo,
address, phone, etc.
■■  to add non standard
encoding to a card
Product Code ACT ID
Product Code ACT Logo
Product Code Encoding
Door Controllers
ACTpro3000 (2 Door Controller)
Features
■■  2 door controller expandable to 16
doors using ACTpro door stations
■■  30,000 users
■■  1,024 user groups
■■  networkable to 2000 doors
■■  PC connection using the built in
TCP / IP or serial (RS232) port or
RS485 (RS485 to serial converter
required)
■■  serial port may be used to connect
a printer
■■  “Clock & Data” and “Wiegand”
format readers
■■  supports ACTpro-X & 3rd party
readers
■■  memory card slot allows additional
functionality: door plan, extra user
rights, distributed intelligence
■■  requires 12 volt DC supply
■■  stores 5,000 log events
■■  monitored tamper of mains present
■■  programmable inputs & outputs
■■  each door has a 5amp, 30 volt DC
lock relay and a 1amp, 24 volt DC
alarm relay
Product CodeACTpro 3000
ACTpro 3000 Memory Card
Features
Product CodeACTpro 3000 MC
37
When Performance Counts
■■  expand memory of ACTpro 3000
■■  adds additional functionality to the ACTpro 3000: door plan, extra user rights, distributed intelligence
Door Controllers (contd.)
ACTpro2000 (2 Door Controller)
Features
■■  2 door controller expandable to 16
doors using ACTpro door stations
■■  20,000 users
■■  1,024 user groups
■■  networkable to 2,000 doors
■■  PC connection using serial (RS232)
port or RS485 (RS485 to serial
converter required)
■■  serial port may be used to connect
a printer
■■  “Clock & Data” and “Wiegand”
format readers
■■  supports ACTpro-X & 3rd party
readers
■■  requires 12 volt DC supply
■■  stores 5,000 log events
■■  monitored tamper of mains present
■■  programmable inputs & outputs
■■  each door has a 5amp, 30 volt DC
lock relay and a 1amp, 24 volt DC
alarm relay
Product CodeACTpro 2000
ACTpro1000 (Single Door Controller)
When Performance Counts
Features
■■  single door controller
■■  10,000 users
■■  16 user groups
■■  PC connection using serial (RS232)
port or RS485 (RS485 to serial
converter required)
■■  “Clock & Data” and “Wiegand”
format readers
■■  supports ACTpro-X & 3rd party
readers
■■  auxiliary door facility
■■  requires 12 volt DC supply
■■  monitored tamper of mains present
■■  programmable inputs & outputs
■■  5amp, 30 volt DC lock relay
38
Product CodeACTpro 1000
Door Station
ACTpro 100 Single Door Station
Features
■■  single door station / expander
■■  max of 14 door stations to each
ACTpro 2000/3000
■■  programmable inputs and outputs:
push button, door contact, interlock
■■  auxiliary relay output for alarms:
door forced, door ajar, duress,
door open, access granted, access
denied
■■  LED status notification
■■  requires 12 volt DC supply
■■  indoor only
■■  5amp, 30 volt DC lock relay and a
1amp, 24 volt DC alarm relay
Product CodeACTpro 100
ACTpro101 Single Door Station
Features
Product CodeACTpro 101
39
When Performance Counts
■■  PCB only single door station /
expander
■■  fits neatly into PSU box
■■  mounting holes compatible with
ACTpro 200
■■  max 14 door stations to each
ACTpro 2000/3000
■■  programmable inputs and outputs:
push button, door contact, interlock
■■  auxiliary relay output for alarms:
door forced, door ajar, duress,
door open, access granted, access
denied
■■  LED status notification
■■  requires 12 volt DC supply
■■  indoor only
■■  5amp, 30 volt DC lock relay and a
1amp, 24 volt DC alarm relay
Door Station (contd.)
ACTpro200 Two Door Station
Features
■■  two door station / expander
■■  controls 2 doors
■■  built-in 3 amp monitored PSU
■■  battery deep-discharge protection
■■  fuse blown LED indication
■■  18 swg mild steel cabinet
■■  mains fault indication
■■  supports 2 x 7AHr batteries
■■  accommodates 2 x ACTpro
100PCB’s
■■  mounting points for ACTpro
100PCB on lid
■■  supports entry / exit readers
■■  2 x 1.25 Amp Volts regulated power
supply outputs
■■  alarms are monitored via ACTpro
door controller & ACTWin software
■■  each door has a 5amp, 30 volt DC
lock relay and a 1amp, 24 volt DC
alarm relay
Product CodeACTpro 200
Modules
ACTpro IOM
When Performance Counts
Features
■■  8 programmable input / output
device
■■  max of 4 to each ACTpro 2000 /
3000 door controller
■■  8 form C 5 Amp relays
■■  8 supervised inputs
■■  tamper protection & 2 status LEDs
■■  output switched on/off by log,
event, input, timezone
■■  ACTWin pro support
■■  use for elevator control. CCTV
switches, alarm integration
40
Product CodeACTpro IOM
Software
ACTWin Lite
ACTWin pro
Features
Features
■■  ACT Notifier: SMS / e-mail event
alerts (from 2.6)
■■  ACTWeb browser based interface
for managing users and reporting
(from 2.5)
■■  unlimited log events
■■  connect to locations via TCP/IP,
serial interface or modem
■■  report generation
■■  challenge
■■  card editor & printing (with barcode
& magnetic stripe)
■■  supports MS Access or MS SQL
formatted databases
■■  supports XP, Vista, 2003
■■  all functions of ACTWin Lite plus
■■  2,000 doors
■■  supports 200 different locations
■■  multiple clients can connect to
database
■■  audit trail
■■  DVR integration (from 2.4 and later)
■■  time & attendance (from 2.3 and
later)
Product Code
Product CodeACTWin pro
ACTWin Lite
ACTWin Lite is available to
download from our website
www.accesscontrol.ie
ACTWin Lite
ACTWin pro
64
2,000
Password
User Groups
1,024
1,024
Protection
TCP / IP
Event Log
Infinite
Infinite
Modem
Doors
ACTWin Lite
Connection
Multi Tenant
Support
Report: Roll Call
Module
Card Editor
Report: Time &
T & A Module
Attendance
ACT Notifier
ACT Web
Local & Remote
Limited
Challenge
Sites
User Tracking
DVR Integration
Audit Trail
Photo-ID
PC Users
1
5*
Client Server
41
* First 5 users require a license. Unlimited users after 5.
When Performance Counts
Anti Passback
ACTWin pro
Software (contd.)
ACTWin pro Workstation
Features
■■  additional operator work station
Product CodeACTWin pro W/S
ACTWin pro Multi Tenant
Features
■■  allows the system to be partitioned for simpler administration
■■  define up to 200 separate tenants
■■  log events that occur to other
tenants are not displayed
■■  in the event of a fire occurring in
one tenant the muster report is only
generated for users of that tenant
■■  module for ACTWin pro 2.4 and
later
Product CodeACTWin pro Multi
Tenant
ACTWin pro Time & Attendance
When Performance Counts
Features
■■  audit trail, employee time and
attendance calculations, absentees
reports, holiday management
■■  report generation
■■  European Working Time Directive
compliance
■■  Bradford Factor Calculation
■■  export information to payroll
applications
■■  module for ACTWin pro 2.3 and
later
42
Product CodeACTWin pro Time
& Attendance
Network & Communication Devices
ACT Lan
Features
■■  TCP / IP unit to facilitate connection of ACTpro 1000 / 2000 controllers to Lan
■■  supplied with power pack, serial lead and PC interface leads
Product CodeACT Lan
ACT Single Channel Interface
Features
■■  Single channel RS232 to RS485 network interface
■■  RS232 to RS485 converter
■■  supplied with serial and PC interface cables
■■  requires 12 Volt DC supply
Product CodeACT Net IF-1
ACT 4 Channel Interface
Features
■■  4 channel RS232 to RS485 network interface
■■  RS232 input with 4 x RS485 outputs
■■  dedicated 1 amp 12V PSU, complete with
serial lead and housing
43
When Performance Counts
Product CodeACT Net IF-4
Product Specification
Door Controllers
ACTpro 1000 ACTpro 2000 ACTpro 3000
Operating Voltage
12 Volts DC
12 Volts DC
12 Volts DC
Current Consumption
40 / 150 mA
120 / 230 mA
120 / 230 mA
Output Current Sink
100 mA
100 mA
100 mA
Operating Temperature
-10 to + 50 º C
-10 to + 50 º C
-10 to + 50 º C
Controller Weight
750 gms
700 gms
700 gms
Controller Size (H x W x D, mm)
138 x 87 x 37
270 x 190 x 60
270 x 190 x 60
Mounting
Surface / Flush
Surface
Surface
Installation
Indoor
Indoor
Indoor
obust
R
polycarbonate
housing with
stainless steel keys
Robust
polycarbonate
housing with
stainless steel keys
Constructionzinc diecast housing
with stainless steel
keys
ACT 433RX Receiver
Operating Frequency
Modulation
Supply Voltage
Current Consumption
Range in free space (max)
Operating Temperature
Dimensions (HxWxDmm)
Weight
433.92 MHz
FSK
5 Volts or 12 Volts
60mA
50 metres
-20 to +70°C
109 x 100 x 24
106 gms
When Performance Counts
ACT 433TX & TXprox Transmitters
44
Operating Frequency
Modulation
Supply Voltage
Current Consumption
Range in free space (max)
Operating Temperature
Dimensions (H x W x D, mm)
Weight
E.R.P
Batteries
Battery Life
Transmission period
Transmission duration
433.92 MHz
FSK
6 Volts
4mA
50 metres
-20 to +70°C
71.5 x 42.5 x 16
20 gms
5uW
Two CR2032
2 years (normal usage)
2.3 sec.
7m sec.
Product Specification (contd.)
Door Stations
ACTpro 100 ACTpro 101 ACTpro 200
Operating Voltage
12 Volts DC
12 Volts DC
230 V AC +10% -15%
Current Consumption
40 / 120 mA
40 / 120 mA
100 mA
Output Current Sink
100 mA
100 mA
100 mA
Operating
Temperature
-10 to + 50ºC
-10 to + 50ºC
-0 to + 50ºC
Controller Weight
414 gms
80 gms
4873.5 gms
Controller Size
(HxWxD, mm)
110 x 190 x 60
80 x 130 x 25
355 x 370 x 85
Mounting
Surface
inside PSU
Surface
Installation
Indoor
Indoor
Indoor
Construction
Polycarbonate
housing
PCB
Steel housing
Tamper
Yes
Yes
Yes
Door
1
1
2
Relay Per door
2
2
2
Input per door
3
3
3
Output per door
2
2
2
Readers (Prox & Pin)
Yes
Yes
Yes
47 - 63 Hz
Mains Fuse
630 mA
Lock Fuse
1.25 A Quick Blow
Ripple Voltage
<200 mV
Battery
2 x 7 Ahr
Output Voltage
2 x 12V DC regulated
to 1.25 amps
Monitored Alarms
Yes
Battery
2 x 7Ahr
Output Voltage
x 12 V DC Regulated
2
to 1.25 amps
Monitored Alarms
Yes
45
When Performance Counts
Frequency
Product Schematics
ACTpro 3000 Door Controller with 2 access points on board
When Performance Counts
ACTpro 3000 Door Controller with 2 access points on board,
plus additional access point using the ACTpro 100 Door Station
46
ACTpro-X readers
ACT protocol
RS485
Network Type
* Note: If using UTP (Unshielded Twisted Pair) such as Cat 5 please ensure that the cable is not located near sources of electrical noise.
ACTpro Controllers / Door Stations
ACTpro Door stations (ACTpro 100 /
ACTpro Controller
ACTpro 200)
To
From
Cabling Chart
8 core Screen
Belden 9501 or shielded Cat5.
Screen twisted pair(STP) equivalent to
Cable Type*
source
Max distance 100m if powered from 12V
Max distance 1.4 km
14 additional doors
Comments
ACTpro 3000 Door Controller
expanded up to 16 doors with
ACTpro 100 and 200 Door Stations
When Performance Counts
47
When Performance Counts
48
ACTpro Door stations
ACTpro Controller
ACTpro Controller
ACTpro Controller
ACTpro Controller
ACTpro Controller
Master ACTpro Controller (Hub mode)
PC*
PC*
PC*
RS232 to RS485
RS232
TCP/IP
RS485
ACT protocol
RS485
Network Type
Screen twisted pair(STP) equivalent to Belden 9501 or shielded Cat5
Screen twisted pair (STP)
Cat5
Screen twisted pair(STP) equivalent to Belden 9501 or shielded Cat5.
8 core Screen
Screen twisted pair(STP) equivalent to Belden 9501 or shielded Cat5.
Cable Type**
** Note: If using UTP (Unshielded Twisted Pair) such as Cat 5 please ensure that the cable is not located near sources of electrical noise.
*The ACTpro 3000 controllers can either be connected to the computer via TCP/IP or Serial
ACTpro-X readers
ACTpro Controllers / Door Stations
(ACTpro 100 / 200)
To
From
Cabling Chart
Max distance 20m for RS232 and 1.4km for RS485. Needs Single Channel Interface (ACT Net IF-1)
Needs Single Channel Interface (ACT Net IF-1)
Max distance of 20m. If Hub mode is required with the ACTpro 2000 then connect via the network .
Max distance of 100m. If using an ACTpro 2000 an ACT LAN is required
Maxi distance 1.4 km (31 additional controllers)
Max distance 100m if powered from 12V source
Max distance 1.4 km. 14 additional doors
Comments
ACTpro 3000 Door Controller with
up to 16 doors, connected via a
serial port (RS232) to a PC running
the ACTWin software
Max of 16 doors per
ACTpro 2000 / 3000.
Max of 4 IOM’s.
Max of 16 doors per
ACTpro 2000 / 3000.
Max of 4 IOM’s.
ACTpro 3000 Door Controller, each
with a max of 16 doors, connected
via Ethernet (TCP / IP) to a PC
running the ACTWin software
When Performance Counts
49
When Performance Counts
ACT 433 Long Range Receiver &
Transmitters with pro range of Door
Controllers, Door Stations and
Readers
50
Installation Notes
Readers
ACTpro-X Readers
■■  May be installed in exposed outdoor
conditions (IP67)
■■  May be up to 100m when powered from
+12V DC
■■  May be a maximum of 30m from the
controller when powered from +5V DC
■■  Use 8 core screened cable
Note: The +5 Volt reader supply on ACT
controllers is normally rated at 100mA.
Typically this is sufficient to power 2 ACTpro
Readers.
Controllers
ACTpro 3000
■■  The ACTpro 3000 requires a 12 Volt DC
supply
■■  The controller may not be installed
outdoors unless it is in a sealed and
heated cabinet
■■  The ACTpro 3000 is expanded from 2 to
16 access points via “single door ACTpro
100” or the “two Door ACTpro 200”
Expanders
■■  The ACTpro 3000 is compatible with
ACTWin Pro and ACTWin Lite software
packages.
■■  The ACTpro 3000 controller will operate
standalone or can be connected to a PC
via the onboard
• RJ45 TCP/IP port
• Serial port (RS232)
• RS485. (ACT supply an ACT IF1 which
converts RS485 to RS232)
■■  The ACTpro 3000 Controller may be
networked via an RS485 interface to
expand the system up to a maximum of
32 controllers (512 doors).
ACTpro 2000
■■  The ACTpro 2000 controller will operate
standalone or can be connected to a PC
via the onboard
• Serial port (RS232)
• RS485. (ACT supply an ACT IF1 which
converts RS485 to RS232)
■■  The ACTpro 2000 Controller may be
networked via an RS485 interface to
expand the system up to a maximum of
32 controllers (512 doors).
51
When Performance Counts
■■  The ACTpro 2000 requires a 12 Volt DC
supply
■■  The controller may not be installed
outdoors unless it is in a sealed and
heated cabinet
■■  The ACTpro 2000 is expanded from 2 to
16 access points via “single door ACTpro
100” or the “two Door ACTpro 200”
Expanders
■■  The ACTpro 2000 is compatible with
ACTWin Pro and ACTWin Lite software
packages.
Door Stations
ACTpro 200
■■  For indoor use only
■■  The ACTpro 200 connects to the ACT
controller on the DOORS network
■■  The ACTpro 200 is compatible with all
versions of ACTpro 2000 and ACTpro
3000 Controllers
■■  Up to 7 ACTpro 200s can be connected to
a controller (total of 14 additional access
points)
■■  ACTpro 200 and ACTpro 100 may be
connected on the same network
ACTpro 100
■■  For indoor use only
■■  The ACTpro 100 connects to the ACT
controller on the DOORS network
■■  The ACTpro 100 is compatible with all
versions of ACTpro 2000 and ACTpro
3000 Controllers
■■  Up to 14 ACTpro 100s can be connected
to a controller (total of 14 additional
access points)
■■  ACTpro 100 and ACTpro 200 may be
connected on the same network
Modules
ACTpro IOM
When Performance Counts
■■  For indoor use only
■■  The ACTpro IOM connects to the ACTpro
2000 and 3000 controller on the doors
network
■■  The ACTpro IOM connects to the
ACTpro 2000 and 3000 controller on the
doors network
52
■■  Up to 4 ACTpro IOMs can be connected
to the ACTpro 2000 / 3000 controller
(including the 14 access points)
■■  Each ACTpro IOMs has 8 inputs and 8
outputs controller can support a maximum
of 32 inputs and 32 outputs per 2000 /
3000 door controller.
Product Comparisons
Please use these product feature comparison charts to help you choose
the device which most suits your needs.
Door Controllers
ACTpro 1000
ACTpro 2000
ACTpro 3000
Doors
1
2*
2*
Users
10,000
20,000
30,000
User Groups
16
1,000
1,000
Event Log
500
5,000
5,000
Anti passback
***
Entry&Exit Reader Support
Timed Actions
Interlock
User Tracking
Visitor Cards
Card only
Pin & Card
Pin or Card
Pin Only
**
**
5 amp
5 amp
Door Monitoring
Door Control
Fire Alarm Override
Toggle Mode
Door Relay Output
5 amp
1 amp
1 amp
2
2
2
2 (100mA)
2 (100mA)
2 (100mA)
128 max
1,000 max
1,000 max
Auxiliary Relay Output
Programmable Inputs
Programmable Outputs
Tamper Output
Network Doors
Modem Connection
TCP/IP Option
Weight
Dimensions (H x W x D,
mm)
651g
687g
694g
138 x 87 x 37
270 x 190 x 60
270 x 190 x 60
*The ACTpro 2000/3000 Controllers may be expanded to 16 doors via ACTpro 100 / 200 Door Expanders
**The ACTpro 2000/3000 Controllers require an external pin pad for Pin Only Operation
***Global anti passback (anti passback across multiple controllers) is mainly supported on the ACTpro 3000
connected via TCP / IP
53
When Performance Counts
10Base-T (RJ45)
Ethernet Network Interface
Product Comparisons cont’d
ACTpro-X Reader
Description
Mounting
ACTpro-X
1030
ACTpro-X
1030PM
ACTpro-X
1040
ACTpro-X
1050
ACTpro-X
1060
slimline
multi-format
prox
multi-format
prox
multi-format
prox
multi-format
pin & prox
pin only
mullion
panel
IP67
IP67
surface / flush
Proximity
Pin
IP rating
IP67
IP67
IP67
ACT Cards and Fobs
n/a
HID Cards and Fobs
n/a
Selectable Clock & Data or
37-bit Wiegand Output
Robust polycarbonate housing
Construction
Potted electronics
Tri-colour LED
Built-in buzzer
Mounts on to standard
single gang electrical back
box
5 to 12 Volts DC
Operating Voltage
40mA
Current Consumption
-10 to +50 Celsius
Operating Temperature
Weight
When Performance Counts
Dimensions
(H x W x D, mm)
54
140g
61g
154g
169g
161g
108 x 36
x 13
63 x 58 x
23
110 x 100
x 35
110 x 100
x 35
110 x 100
x 35
Product Comparisons cont’d
ACTpro mifare Reader
Description
ACTpro mifare 1040
ACTpro mifare 1050
Contactless
smartcard reader
Contactless
smartcard & pin
reader
surface / flush
Mounting
Proximity
Pin
IP rating
IP67
IP67
Selectable Clock & Data or
37-bit Wiegand Output
Mifare cards
Selectable Sector, Serial &
Reverse Serial reader
Construction
Robust polycarbonate housing
Potted electronics
Tri-colour LED
Built-in buzzer
Mounts on standard single
gang electrical back box
12 Volts DC
Operating Voltage
70 mA
Current Consumption
-10 to +50 Celsius
Operating Temperature
Weight
Dimensions (H x W x D,
mm)
142g
110 x 100 x 35
155g
110 x 100 x 35
When Performance Counts
55
Audio Video over IP Door Entry
ACTentry V-IP Kit
Audio Video over IP Door Entry
Features
Each kit comprises of:
■■  ACTentry V-IP door entry panel
■■  ACTentry V-IP control unit
■■  ACTentry V-IP handset
■■  ACTentry V-IP software & manual
■■  ACTentry 1A PSU
Kits do not include locks
Optional components
ACTpro-X 1030PM proximity reader
Product Code
Surface Mount: ACTentry V-IPVR-SK
Flush Mount:
ACTentry V-IPVR-FK
ACTentry V-IP Door Entry Panel
When Performance Counts
Features
■■ audio video door entry over TCP/IP
■■ grant / deny building access from
PC
■■ connect to unlimited PC's
■■ software can manage up to 8
entrance points
■■ door relay, 5amp
■■ alarm relay, 1amp
■■ vandal resistant, stainless steel
■■ integrated day and night colour
video camera
■■ integrated call button and speech
unit
■■ option to integrate ACTpro-X
1030PM proximity reader
(not included)
■■ push button gives audio alert
■■ supports static & dynamic IP
addresses
■■ Vista & XP compatible
56
Product Code
Surface Mount: ACTentry V-IPVR-S
Flush Mount:
ACTentry V-IPVR-F
(sold individually or included in kit)
ACTentry V-IP Control Unit
Features
■■ ethernet interface unit
■■ converts video and audio signals
from door entry panel to TCP/IP
data
■■ door and alarm inputs and outputs
■■ echo cancellation control
Product Code
included in kit
ACTentry V-IP Software
Features
■■ unlimited users
■■ auto video pop-up or discrete mode
■■ video bandwidth can be set
according to network constraints
■■ grant / deny access
■■ volume control
■■ set door open & call answer timers
■■ call routing
■■ events logging
Product Code
included in kit
When Performance Counts
57
ACTentry
V-IP PC
Handset
ACTentry
1Amp Power
Supply
■■ handset plugged into PC
■■ indoor use only
■■ 1amp, 12 Volt DC power supply unit
Product CodeACTentry V-IP
Handset
(sold individually or included in kit)
Product CodeACTentry 1A Power
Supply
(sold individually or included in kit)
Features
Features
ACTpro-X 1030PM Reader
can be integrated into the Door Entry Panel
Features
■■ panel mount multi-format proximity
reader
■■ indoor/outdoor (IP67)
When Performance Counts
Product Code ACTpro-X 1030PM
For use with ACTpro-X
1030PM
for a full list of suitable cards
& fobs see page 25
58
Audio Door Entry with Access Control
ACTentry A10 Kit
Audio Door Entry & Access Control Kit
Features
Each kit comprises a
• door entry panel
• handset
• power supply unit
Kit does not include locks
Product Code
Surface Mount Kit:ACTentryA10VR-SK
Flush Mount Kit: ACTentryA10VR-FK
ACTentry A10 Door Entry Panel
Features
Product Code
Surface Mount: ACTentryA10VR-S
Flush Mount:
ACTentryA10VR-F
59
When Performance Counts
■■ audio door entry and access control
■■ connect up to 4 Door Intercom
Handsets
■■ incorrect code lockout
■■ 10 user codes
■■  2 user groups
■■  push to exit input
■■  door monitoring / contact input
■■  tamper output
■■  fire alarm override
■■  interlock
■■  toggle mode
■■  2 x 5 amp, 30 Volt relays
■■  2 x 100 mA Darlington Driver
outputs
■■ vandal resistant, stainless steel
panel
■■ incorporates call button, speech unit
and ACT 10 digital keypad
■■ keypad backlighting
■■ surface / flush mount options
■■ indoor / outdoor (IP54)
ACTentry A10 Door
Intercom Handset
Features
■■ white high impact ABS plastic
■■ internal use only
■■ ‘lock release’ push-button
■■ reduced tone volume when off hook
■■ adjustable volume control
Product CodeACTentry A10 Intercom Handset
ACTentry 1 Amp
Power Supply
Features
■■ 1amp, 12 Volt DC power supply unit
When Performance Counts
Product CodeACTentry 1A Power
Supply
60
Product Specifications
ACTentry V-IP Audio / Video over IP
Number of PC Users unlimited (subject to network capabilities)
Number of Doors8 (door entry panel and control unit required for
each door)
Operating Voltage
10 - 15 Volts DC
Current Consumption
450 / 500 mA
Operating Temperature
-10 to +50°C
Door Open Time
0 – 255 seconds
Relay Contact Rating Door Relay: 5A / 30 V DC
Alarm Relay: 1A / 24 V DC
Mounting
surface or flush
Installationoutdoor
IP Rating
IP54
Construction brushed stainless steel panel
Door Entry Panel Dimensions
Flush Mount:
378 x 144 x 11
(H x W x D, mm)
Surface Mount: 358 x 125 x 38
Door Entry Panel Weight
Flush Mount: 2,650g
Surface Mount: 2,751g
ACTentry V-IP Software
Network ConnectionEthernet or FastEthernet LAN connection with
TCP/ IP protocol (100MBps prefered)
Memory512MB RAM, Pentium 3 Processor, 1GB Hard
Disk space
Operating systems
Windows XP, Windows 2000, Windows Vista.
HardwareCD ROM drive (installation only), sound card
ACTentry A10 Audio Door Entry System
10 PIN codes
12 Volts AC or DC
30 / 100 mA
-10 to +50°C
0 – 255 seconds
5A / 30 V DC
surface or flush
indoor or outdoor
IP54
brushed stainless steel panel
Flush Mount: 378 x 144 x 11 Surface Mount: 358 x 125 x 38
Flush Mount: 2,150g
Surface Mount: 1,890g
61
When Performance Counts
Number of Users Operating Voltage
Current Consumption
Operating Temperature
Door Open Time
Relay Contact Rating Mounting
Installation
IP Rating
Construction Door Entry Panel Dimensions
(H x W x D, mm)
Door Entry Panel Weight
Product Schematics
ACTentry V-IP audio video over TCP / IP with multiple users
When Performance Counts
ACTentry A10 audio door entry with up to 4 handsets
62
Installation Notes
ACTentry V-IP Audio Video over TCP / IP Door Entry
ACTentry V-IP Door Entry Panel
ACTentry V-IP Software
■■  Mount on a wall near the entrance point
and in a sheltered location
■■  Sink or mount onto the mounting surface
at a height which puts the camera lens at
eye level
■■  PC should be connected to a TCP/IP
network.
■■  Install on any PC where the user is
expected to answer calls and allow
access to the building
■■  Use the CD provided to install the
software.
ACTentry V-IP Control Unit
■■  Mount in secure place with an Ethernet
network connection point in close
proximity, no greater than 100 metres
from the door entry panel.
■■  A 12 Volt DC , 1 Amp power supply is to
be used to power the unit and the door
entry panel audio and video module’s.
■■  The door entry panel and the unit are
to be wired together using one CAT 5
twisted pair Cable. Audio and mic must
be on one pair and video and 0V on
another pair.
■■  The VIP can be configured with a static IP
address for the LAN or get it’s IP address
from the DHCP server.
ACT PC Handset
■■  Mount the PC Handset in a location that
is easily accessible and unobstructive for
the user.
ACTentry A10 Audio Door Entry
ACTentry A10 Door Entry Panel
■■  The ACTentry Door Intercom Handset
(handset) operates from 12 Volt AC or DC
■■  The handset is designed to be wall
mounted in a convenient indoor location
■■  For optimum speech clarity, it is strongly
recommended that this system should
be installed using twisted-pair telephone
cable.
■■  Up to a maximum of 4 handsets may be
installed per Door Entry Panel
■■  The maximum distance between the Door
Entry Panel and the last handset is 100
metres.
63
When Performance Counts
■■  The unit should be mounted on a wall
near the entrance point, and in a sheltered
location
■■  Remember to place the supplied varistor
across the terminals of the door strike coil
to protect the relay contacts
■■  Never use the on-board relay to switch
AC mains voltage. An external relay,
electrically isolated from the ACTentry A10
should be used for this purpose.
■■  Remember to change the programming
code
ACTentry A10 Door Intercom
Handset
When Performance Counts
64
Customer
Services
Adding value to ACT
products the ACT Customer
Services department
provides a variety of support
structures for all clients
Customer Services
Training
Certified training is an important element of
the security industry and ACT has developed
certified training courses for our products. These
courses are tailored to provide the fundamental
skills required to design, install, commission and
operate access control systems. We can work to
develop bespoke training modules tailored for your
organization.
A full range of training programs cover standalone,
master-slave and networked access control
solutions.
Each module is instructor led, hands on and
teaches the installer how to configure ACT
products and systems.
Technical Support
Access Control Technology has a team of qualified
and experienced engineers to assist with any
problems relating to access control.
When Performance Counts
If problems are not resolved then they are
automatically escalated to the 2nd level support
team at which stage the hardware and software
engineers may be involved to assist in resolving the
particular issue.
66
Customer Services (contd.)
Development &
Systems Integration
ACT offers a one stop totally managed service from
Project management, development, testing, installation
and training by experienced staff.
The customer service department has been involved
in developing and project managing many bespoke
solutions and integration projects from 3rd party
database; most notable Microsoft’s LDAP – Active
Directory and large human resources databases. It has
also been involved in modifying the behaviour of the ACT
hardware to accommodate customers requirements.
On Site Support
The ACT customer services team is available to
provide clients with on site support and guidance
when required. This is particularly useful when detailed
knowledge of access control technologies is necessary
or where the experience of large database technology,
IP networking, computer security or integration is not
readily available.
Consultation Services
67
When Performance Counts
ACT Customer service and sales departments are
always on hand to assist with tender specifications
and system design and in developing a solution for the
customer.
When Performance Counts
68
Appendix
Glossary of Terms for
Access Control
Access
Action of entry into or exit from a security
controlled area.
ACTWin pro
Client/Server version of ACTWin for use by
simultaneous users.
Access Authorisation
Permission granted to a token enabling the
holder to enter a location based
on a programmed time schedule.
ACTWin lite
Single user version of ACTWin.
Access Control Report
Reports indicating the movement (entry or
exit) at each access location on the system
and the users who have passed through.
Access Control System
A system which comprises all the
constructional and organisational measures
as well as those pertaining to the apparatus
which are required for controlling access
Access Control Unit
Device which makes the decision to release
one or several access points and manages
the associated control sequence
When Performance Counts
User Group
A number of users sharing the same doors at
the same time
ACT Standalone Keypad
A single door control unit with no links to
other controllers or PC applications.
ACT Smart Keypad
Is a family of intelligent standalone door
controllers with pro functionality, which can
be networked together and configured from a
master keypad or a PC using the ACTSmart
software.
Access Point
The location at which access can be
controlled by a door, turnstile or other secure
barrier
Alert
Request for human intervention after the
activation of an indicator
Access Point interface
Device which controls releasing and securing
of an access point
Annunciation
Presentation of the information to
management or other system
Access Point Reader
Device used to extract recognition data
from a token or biometric. The device can
have an associated keypad when used with
memorised information.
Apas
Access point actuators and sensors.
Examples of actuators are electrical door
openers, electric locks, turnstiles and
barriers. Examples of sensors are contacts,
switches, pressure signalling devices and
door switches
ACTWin
A computer application for use with the
ACTpro family of door access control units
70
ACTpro
Is a family of access controllers, door
expanders and readers which can be
networked and connected to the ACTWin
application to ease configuration. The
pro controllers support 2 doors directly
and expandable to 16 doors using door
expanders. The configuration can also take
place at the controller which is useful if the
customer does not have a computer or the
computer has failed.
Apas closed
An apas is closed when the access point
does not afford free passage
Apas open(ed)
An apas is open(ed) when the access point
affords free passage
Apas violation
Unauthorised operation of an access point
Area controlled anti-pass back
Operating mode which requires the user to
be present in a designated security controlled
area in order to be able to enter another
security controlled area.
Door Command Facility
Facility that allows an authorised computer
operator to open / close a door on the
system from their terminal
Door Open Time
The time allowed for an access point to
remain open after a valid authentication.
Door Strike
An electro-mechanical device used to lock
and unlock a door under electrical control.
Anti-Passback
Operating mode which requires user
validation when leaving a security controlled
area In order to be able to re-enter and vice
versa
Egress Button
Also referred to as push button (PB), exit
button (EB) or request to exit button (RTE).
which indicates to the access control point
that the user wishes to exit.
Audit trail
A report of any changes made to a system.
Event
A change occurring within the access control
system
Event log
A record of a series of events.
Break Glass
Usually a mechanical switch which breaks
power going to the lock.
Exit
A way out of an area which may or may not
be controlled.
Clock and Data
A specific data communication protocol
which is an industry standard for the serial
transmission of information.
Factory Default
A term commonly used to define resetting
a device back to the settings it had when
leaving the factory.
Controlled Area
An area where the entrances and exits are
controlled by an access control system.
Fail Safe
Mode where apas affords free passage (apas
open(ed)) when the power is removed.
Degraded Mode
Mode where access is granted without
performing all the full processing
Fail secure
Mode where apas does not afford free
passage (apas closed) when the power is
removed
Duress Alarm
Information providing the same results as a
memorised information and
which initiates an alert
False acceptance
The granting of access to an authorised user
False rejection
The denial of access to an authorised user
71
When Performance Counts
Biometrics
Information which is referring to unique
physiological attributes of the user
Glossary of Terms for Access Control cont’d
Fault condition
Any condition which leads to the interruption
or degradation of the access control system’s
functionality.
Guard Tour
A defined route of a security guard.
Ingress
To enter (opposite of egress)
Logic Anti-Passback
See anti-passback
Memorised information:
Information known to the user
Monitored
Senses the state of the door, if it is open or
closed
Mullion reader
A reader designed to be mounted on the
door frame.
Noise
Unwanted signals present on data lines.
Normal condition
The access control system is fully functional
and able to process all events according to
the pre-set rules.
When Performance Counts
Off-line
A term used to define communication which
cannot be established between two network
devices.
On-line
A term used to establish that communication
has been established between two network
devices.
72
Password
A special sequence of characters (letters,
numbers, symbols) that are used to gain
access to a computers operating system or
an application.
Photo ID
An electronic photo of the user which is
stored in the access control database. This
photo can be used for visual verification or
printing onto the user access card.
PIN
Personal Identification Number.
Power Supply
That part of the access control system which
provides power for the operation of the
system or any part thereof
Processing
The comparing of information with pre-set
rules to make decisions concerning the
granting or denying of access to users and/or
the comparing of event with pre-set rules to
produce appropriate actions
Programmability
Ability to receive and store pre-set rules
Protocol Convertor
Data transmission convertor i.e RS232 to
RS485 or vice versa.
Proximity
Radio frequency technology used in access
control, where a token is presented to a
reader. The read ranges can be from a few
mm up to 50m as with the ACT433 Tx.
PSU
Power Supply Unit see Power supply
Pulse
A positive or negative change in voltage on a
circuit
Reader
See access point reader
Release
The signal to the apas that access has been
granted
Real time download
Information which can be downloaded in real
time from the PC to the controller such as the
change in a users access rights.
Tamper Protection
Methods used to protect an access control
system or part thereof against deliberate
interference
Radio-frequency identification device
(RFID)
These are tokens which use radio frequency
(RF) to transmit the ID which is stored in the
token.
TCP/IP support
Data communication protocol most
commonly used for computer networks and
the internet.
Roll call reports
Reports indicating who is present or absent.
RS232
A data communication industry standard for
the serial transmission of information, the
transmission distance can be from 20m up to
30m approx.
RS485
A data communication industry standard for
transmission of information the transmission
distance is a max 1.4km.
Relay
A magnetically operated mechanical switch.
Security Control Unit
Area surrounded by physical barrier, including
one or more access points
Smartcard
A smartcard is a card with an integrated
microprocessor that can record data which
can be used for access control, cashless
vending.
Tailgating
Where an individual tries to gain access by
following behind an authorised user.
Time & Attendance reports
Reports indicating the time a user has spent
in the building consisting of arrival time,
leaving time and duration which can be run
for a defined period such as daily, weekly or
monthly.
Time grid
One or more time zones allocated to the
access level
Time Slot
Interval of time between two given moments
indicating the beginning and end of a valid
period within a time zone
Time zone
One or more time slots combined with
calendar information
Toggle
A signal to the apas to grant access and
remain in that state until toggle is deactivated
usually by presenting or re-entering the token
or memorised information
Token
Recognition data provided by access cards,
keys, fobs, etc
73
When Performance Counts
Site code
Part of the security code stored in the access
card which identifies the installation the
Access control token (card or fob) belongs
to.
Timed Anti- Passback
Timed anti-pass back Operating mode which
inhibits the access granting process at an
Access point or to a security controlled area
for a preset period for a particular user once
that user has been granted access
Glossary of Terms for Access Control cont’d
Token holder
An individual who has been issued and holds
an access control token.
Token Number
Coded number stored in the access control
token (card or fob).
Transaction
An event which corresponds to the release
of an access point following recognition of a
user identity
Two users access condition
Procedure which ensures that access
is granted provided two users have
demonstrated their right of access within a
preset period.
Unmonitored
Does not sense the open/closed status of
the door.
Upload facility
Facility whereby the information stored in a
controller can be uploaded to the PC.
Users
A person requesting passage through an
access point
When Performance Counts
User Groups
Grouping of individuals who have common
access rights such as office staff , production
staff or security staff.
User identity
Information which is transferred directly or
via a token by the user to the recognition
equipment
User Tracking
Facility for identifying where a particular token
was last used.
74
Wiegand
A specific data communication industry
standard for the serial transmission of
information can vary from 26-54 bits.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising