Your iMac comes with an Apple Wireless Keyboard, a wireless Apple Magic Mouse, and an AC power cord. If you ordered an Apple Remote, it’s also in the box.

Apple Wireless Keyboard Apple Magic Mouse

AC power cord

Chapter 1 Ready, Set Up, Go 9

Setting Up Your iMac

Follow these steps to set up your iMac. Wait until Step 4 to turn on your iMac.

Step 1: Pass the power cord through the hole in the stand, plug it into the power port on the back of your iMac, and then plug the cord into a power outlet.

10 Chapter 1 Ready, Set Up, Go

Step 2: To access the Internet or a network, connect one end of an Ethernet cable to the Ethernet port on your iMac. Connect the other end to a cable modem, a DSL modem, or a network.

Your iMac comes with AirPort Extreme technology for wireless networking.

For information about setting up a wireless connection, choose Help > Mac Help and search for “AirPort.”

To use a dial-up connection, you need an external USB modem. Plug the modem into a USB port on your iMac, and then use a phone cord to connect the modem to a phone jack.

Chapter 1 Ready, Set Up, Go 11

Step 3: Turn on your wireless keyboard and mouse.

Press the power button on the right side of your Apple Wireless Keyboard and slide the switch on the bottom of your Apple Magic Mouse to turn them on.

Your wireless keyboard and mouse come with AA batteries installed, and they’re already paired with your iMac. Pairing allows them to communicate wirelessly with your iMac.

Power button

Indicator light

On/off switch

When you first turn on your keyboard or mouse, the indicator light glows steadily for

5 seconds, indicating the batteries are good. If your keyboard or mouse doesn’t turn on,

make sure batteries are installed properly and charged (see page 47).

The indicator light blinks until you turn on your iMac and a connection is established.

Note: If you purchased a USB keyboard or a USB mouse, connect the cable to a USB (d) port on the back of your iMac.

12 Chapter 1 Ready, Set Up, Go

Step 4: Press the power (®) button on the back to turn on your iMac.

You hear a tone when you turn on your iMac. Click your mouse to establish a connection with your iMac.

®

Important: If your keyboard and mouse aren’t paired, follow the onscreen instructions to pair them with your iMac. You may have to click the mouse once to establish a

connection. For more information about pairing, see page 27.

Chapter 1 Ready, Set Up, Go 13

Step 5: Use Setup Assistant to configure your iMac.

The first time you turn on your iMac, Setup Assistant starts. Setup Assistant helps you enter your Internet and email information and set up a user account on your iMac.

If you already have a Mac, Setup Assistant can help you automatically transfer files, applications, and other information from your previous Mac to your new iMac.

If you don’t intend to keep or use your other Mac, it’s best to deauthorize it from playing music, videos, or audiobooks that you’ve purchased from the iTunes Store.

Deauthorizing a computer prevents any songs, videos, or audiobooks you’ve purchased from being played by someone else and frees up another authorization for use. For information about deauthorizing, choose iTunes Help from the Help menu in iTunes.

If you don’t use Setup Assistant to transfer information when you first start up, you can do it later using Migration Assistant. Go to the Applications folder, open Utilities, and double-click Migration Assistant.

After you’re set up, check for updated software. Choose Apple () > Software Update from the menu bar and follow the onscreen instructions.

Step 6: Customize your desktop and set your preferences.

You can easily make your desktop look the way you want using System Preferences, your command center for most settings on your iMac. Choose Apple () > System

Preferences from the menu bar, or click the System Preferences icon in the Dock.

For more information, open Mac Help and search for “System Preferences” or for the specific preference you want to change.

14 Chapter 1 Ready, Set Up, Go

Putting Your iMac to Sleep or Shutting It Down

When you finish working with your iMac, you can put it to sleep or shut it down.

Putting Your iMac to Sleep

If you‘ll be away from your iMac for less than a few days, put it to sleep. When your iMac is in sleep, its screen is dark. You can quickly wake your iMac and bypass the startup process.

To put your iMac to sleep, do one of the following:

Â Choose Apple () > Sleep from the menu bar.

Â Press the power (®) button on the back of your iMac.

Â Choose Apple () > System Preferences, click Energy Saver, and set a sleep timer.

Â Hold down the Play/Pause (’) button on the optional Apple Remote for 3 seconds.

To wake your iMac from sleep, do one of the following:

Â Press any key on the keyboard.

Â Click the mouse.

Â Press the power (®) button on the back of your iMac.

Â Press any button on the optional Apple Remote.

When your iMac wakes from sleep, your applications, documents, and computer settings are exactly as you left them.

Chapter 1 Ready, Set Up, Go 15

Shutting Down Your iMac

If you won’t be using your iMac for more than a few days, shut it down. Choose

Apple () > Shut Down. To turn your iMac on again, press the power (®) button.

NOTICE: Shut down your iMac before moving it. Moving your iMac while the hard disk is spinning can damage the hard disk, causing loss of data or an inability to start up from the hard disk.

16 Chapter 1 Ready, Set Up, Go

Life with Your iMac

www.apple.com/macosx

Mac Help

iLife

Basic Features of Your iMac

Built-in microphone

Camera indicator light

Built-in iSight camera

Slot-loading

SuperDrive

SD card slot

Built-in strereo speakers

Built-in infrared receiver

18 Chapter 2 Life with Your iMac

Built-in microphone

Capture sounds on your iMac, or talk with friends live over the Internet using the included iChat application.

Camera indicator light

The camera indicator light glows when the iSight camera is operating.

Built-in iSight camera

Videoconference with friends and family over the Internet using iChat, snap pictures with

Photo Booth, or capture video with iMovie.

Slot-loading SuperDrive

The slot-loading SuperDrive reads and writes standard-size CDs and DVDs.

SD card slot

Easily transfer photos, videos, and data to and from your iMac with an SD card.

Built-in stereo speakers

Listen to music, movies, games, and other multimedia files.

Built-in infrared (IR) receiver

Use an Apple Remote (available separately) with the IR receiver to control Front Row and

Keynote on your iMac from up to 30 feet (9.1 meters) away.

Chapter 2 Life with Your iMac 19

Ports on Your iMac

G Ethernet port

(10/100/1000

Base-T)

£ Mini DisplayPort

d

USB 2.0 ports (4)

, Audio in/optical digital audio in port f

Headphone out/ optical digital audio out port

H FireWire 800 port

20 Chapter 2 Life with Your iMac

Ethernet port (10/100/1000Base-T)

Connect to a high-speed 10/100/1000Base-T Ethernet network, connect a DSL or cable modem, or connect to another computer and transfer files. The Ethernet port automatically detects other Ethernet devices.

Mini DisplayPort

Output port with support for DVI, VGA, and dual-link DVI. The 27-inch model also supports input from external DisplayPort sources. Required cables and adapters are available separately.

Four high-speed USB (Universal Serial Bus) 2.0 ports

Connect an iPod, iPhone, iPad, mouse, keyboard, printer, disk drive, digital camera, joystick, external USB modem, and more. You can also connect USB 1.1 devices.

Audio in/optical digital audio in port

Connect an external powered microphone or digital audio equipment. This port is also a

S/PDIF stereo 3.5 mini-phono jack.

Headphone out/optical digital audio out port

Connect headphones, external powered speakers, or digital audio equipment. This port is also a S/PDIF stereo 3.5 mini-phono jack.

FireWire 800 port

Connect high-speed external devices, such as digital video cameras and storage devices.

The port provides up to 7 watts of power.

Chapter 2 Life with Your iMac 21

Other Components of Your iMac

Power port

Security slot

® Power button

Memory access

(underneath)

22 Chapter 2 Life with Your iMac

Power port

Connect the power cord to your iMac.

Security slot

Attach a lock and cable to discourage theft (available separately).

Power button

Press to turn on your iMac or put it to sleep. Hold down to restart your iMac during troubleshooting.

AirPort Extreme wireless technology (inside)

Connect to a wireless network using built-in AirPort Extreme technology.

◊

Memory access

Your iMac comes with at least 4 GB of memory installed as two 2 GB memory modules.

Bluetooth ® 2.1+EDR wireless technology (inside)

Connect wireless devices, such as the Apple Wireless Keyboard and Apple Magic Mouse,

Bluetooth mobile phones, PDAs, and printers.

Chapter 2 Life with Your iMac 23

Features of the Apple Wireless Keyboard and Magic Mouse

Volume keys

Media keys

Brightness keys

Exposé Dashboard

Media Eject key

Apple

Wireless

Keyboard

Apple

Magic

Mouse

24 Chapter 2 Life with Your iMac

Apple Magic Mouse

Features a laser tracking engine, Bluetooth wireless technology, and a seamless top-shell that uses Multi-Touch technology to support multiple buttons, 360˚ scrolling, screen zoom, and swipe control of your iMac. Use Mouse preferences to adjust tracking, clicking,

and scrolling speed, or to add secondary button support (see page 29).

Apple Wireless Keyboard

Combines wireless freedom with integrated function keys that work with your applications.

Media Eject key

Hold down this key to eject a disc. You can also eject a disk by dragging its desktop icon to the Trash.

Dashboard key (F4)

Open Dashboard to access your widgets.

Exposé key (F3)

Open Exposé to see all of the open windows on your desktop at once.

Brightness keys (F1, F2)

Increase ( ) or decrease ( ) the brightness of the screen.

’

Media keys (F7, F8, F9)

Rewind ( ), play or pause ( ’ ), or fast-forward ( ) a song, movie, or slideshow.

Volume keys (F10, F11, F12)

Mute ( — ), decrease ( – ), or increase ( headphone port on your iMac.

) the volume of sound coming from the speakers or

Chapter 2 Life with Your iMac 25

Using the Apple Wireless Keyboard

Your wireless keyboard, which comes with two AA batteries installed, is already paired with your iMac. Pairing means your keyboard and iMac are connected wirelessly and can communicate with each other.

About the Indicator Light

The LED on your wireless keyboard functions as a battery indicator and a status light.

When you first turn on your keyboard, the light glows steadily for 5 seconds, indicating the batteries are good, and then turns off. If you press the power (®) button on your wireless keyboard and the indicator light doesn’t glow, you may need to replace the

batteries. See “Replacing the Batteries” on page 47.

Indicator light Power button

26 Chapter 2 Life with Your iMac

Pairing Your Wireless Keyboard with Your iMac

If your wireless keyboard isn’t paired with your iMac, the indicator light begins to blink, indicating your keyboard is in discovery mode and ready to pair with your iMac.

To pair your wireless keyboard:

1 Press the power (®) button to turn on your wireless keyboard.

2 Choose Apple () > System Preferences, and then click Keyboard.

3 Click “Set Up Bluetooth Keyboard …” in the lower-right corner.

4 Select your wireless keyboard, and then follow the onscreen instructions.

If you don’t pair your keyboard with your iMac within 3 minutes, the indicator light and keyboard turn off to preserve battery life. Press the power (®) button to turn your keyboard on again, allowing you to pair it with your iMac. Once you successfully pair your keyboard with your iMac, the indicator light glows steadily for 3 seconds, and then turns off.

Using Your Keyboard

Customize your keyboard using Keyboard preferences. You can change the modifier keys, assign keyboard shortcuts to menu commands in a Mac OS X application or in the

Finder, and more.

To customize your keyboard:

1 Choose Apple () > System Preferences.

2 Click Keyboard, and then click Keyboard or Keyboard Shortcuts.

Chapter 2 Life with Your iMac 27

Using the Apple Magic Mouse

Your wireless Apple Magic Mouse, which comes with two AA batteries installed, is already paired with your iMac. Pairing means your Apple Magic Mouse and iMac are connected wirelessly and can communicate with each other.

About the Indicator Light

When you first turn on your Apple Magic Mouse, the light glows steadily for 5 seconds, indicating the batteries are good. If you turn your mouse on and the indicator light

doesn’t glow, you may need to replace the batteries. See “Replacing the Batteries” on page 47.

Indicator light

On/off switch

28 Chapter 2 Life with Your iMac

Pairing Your Apple Magic Mouse with Your iMac

If your Apple Magic Mouse isn’t paired with your iMac, the indicator light begins to blink, indicating your mouse is in discovery mode and ready to pair with your iMac.

To pair your mouse:

1 Slide the on/off switch on the bottom of your mouse to turn it on.

2 Choose Apple () > System Preferences, and then click Mouse.

3 Click “Set Up Bluetooth Mouse …” in the lower-right corner.

4 Select your wireless mouse, and then follow the onscreen instructions.

If you don’t pair your mouse with your iMac within 3 minutes, the indicator light and mouse turn off to preserve battery life. Slide the on/off switch to turn your mouse on again, allowing you to pair it with your iMac. Once you successfully pair your mouse with your iMac, the indicator light glows steadily.

Using Your Apple Magic Mouse

To learn about the Multi-Touch gestures you can use with your Apple Magic Mouse or to change the way it works, use Mouse preferences. Choose Apple () > System

Preferences, and then click Mouse.

Chapter 2 Life with Your iMac 29

Using the Apple Remote

If your iMac came with an Apple Remote, you can use it with Apple products that have a built-in infrared (IR) receiver. Control and play a DVD movie or music from your iTunes library, watch photo slideshows and movie trailers, and more.

Up Select

Left Right

Down

Menu Play/Pause

To use your remote:

1 Press Play/Pause to play or pause a song, slideshow, or movie.

2 Press Right or Left to skip to the next or previous song in your iTunes library, or the next or previous chapter on a DVD.

3 Hold down Right or Left to fast-forward or rewind a song or movie.

4 Press Up or Down to adjust the volume.

30 Chapter 2 Life with Your iMac

Pairing Your Apple Remote

Pair your Apple Remote with your iMac or another Apple product. After you pair the iMac or Apple product, it’s controlled by only the paired remote.

To pair your remote:

1 Move within 3 to 4 inches (8 to 10 cm) of your iMac or Apple product.

2 Point the remote at the IR receiver on the front of your iMac or Apple product.

3 Hold down Right and Menu for 5 seconds.

When you’ve paired your remote, a chainlink symbol appears onscreen.

To unpair your remote on an iMac:

1 Choose Apple () > System Preferences from the menu bar.

2 Click Security, and then click Unpair.

For Apple TV or other Apple products, hold down Menu and Left to unpair.

Replacing the Battery

To replace the battery:

1 Use a coin to remove the battery cover.

2 Insert a CR2032 battery, positive (+) side up.

3 Replace the cover and use a coin to tighten it.

Battery compartment

Chapter 2 Life with Your iMac 31

Getting Answers

Much more information about using your iMac is available in Mac Help and on the

Internet at www.apple.com/support/imac.

To open Mac Help:

1 Click the Finder icon in the Dock (the bar of icons along the edge of the screen).

2 Choose Help > Mac Help (click the Help menu in the menu bar and choose Mac Help).

3 Click in the search field, type a question, and press Return on your keyboard.

More Information

For more information about using your iMac, see the following:

To learn about

Installing memory

Troubleshooting your iMac if you have a problem

Finding service and support for your iMac

Using Mac OS X

See

Chapter 3, “Boost Your Memory” on page 35.

Chapter 4, “Problem, Meet Solution” on page 43.

Moving from a PC to a Mac

Using iLife applications

Changing System Preferences

“Learning More, Service, and Support” on page 57. Or see the

Apple Support website at www.apple.com/support.

The Mac OS X website at www.apple.com/macosx. Or search for

“Mac OS X” in Mac Help.

“Why you’ll love a Mac” at www.apple.com/getamac/whymac.

The iLife website at www.apple.com/ilife. Or open an iLife application, open Help for the application, and then type a question in the search field.

System Preferences by choosing Apple ( K ) > System

Preferences. Or search for “system preferences” in Mac Help.

32 Chapter 2 Life with Your iMac

To learn about

Using the iSight camera

See

Mac Help and search for “iSight.”

Using your keyboard or mouse System Preferences and choose Keyboard or Mouse. Or open

Mac Help and search for “keyboard” or “mouse.”

Using AirPort Extreme wireless technology

The AirPort Support page at www.apple.com/support/airport.

Or open Mac Help and search for “AirPort.”

Using Bluetooth wireless technology

Open Mac Help and search for “Bluetooth.” Or go to the

Bluetooth Support page at www.apple.com/support/bluetooth.

Connecting a printer Mac Help and search for “printing.”

FireWire and USB connections Mac Help and search for “FireWire” or “USB.”

Connecting to the Internet Mac Help and search for “Internet.”

External display

Apple Remote

Mac Help and search for “display port” or “target display mode.”

Mac Help and search for “remote.”

Front Row

Using the SuperDrive

Specifications

Mac Help and search for “Front Row.”

Mac Help and search for “optical drive.”

The Specifications page at www.apple.com/support/specs for standard technical specifications. Or open System Profiler by choosing Apple ( K ) > About This Mac from the menu bar and then clicking More Info.

The Apple website at www.apple.com.

Apple news, free downloads, and online catalogs of software and hardware

Instructions, technical support, and Apple product manuals

The Apple Support website at www.apple.com/support.

Chapter 2 Life with Your iMac 33

Boost Your Memory

www.apple.com/store

Mac Help

RAM

Your iMac comes with at least 4 gigabytes (GB) of Double Data Rate 3 (DDR3) Dynamic

Random Access memory (DRAM) installed as two 2 GB memory modules. You can replace or install additional 2 GB or 4 GB memory modules for up to a maximum of

16 GB. Memory modules must meet the following specifications:

Â Small Outline Dual Inline Memory Module (SO-DIMM) format

Â 1333 MHz, PC3-10600, DDR3 compliant (also referred to as DDR3 1333)

Â Unbuffered and unregistered

WARNING: Apple recommends that you have an Apple-certified technician install memory. Consult the service and support information that came with your iMac for information about how to contact Apple for service. If you attempt to install memory and damage your equipment, that damage isn’t covered by the limited warranty on your iMac.

36 Chapter 3 Boost Your Memory

Installing Memory

Your iMac has four memory slots. Two are filled with at least a 2 GB memory module.

You can install additional memory in the free slots or replace the memory in the filled slots with 2 GB or 4 GB memory modules, for up to 16 GB of memory.

You can purchase additional Apple memory from an Apple Authorized Reseller, an Apple Retail Store, or the Apple Online Store at www.apple.com/store.

WARNING: Always shut down your iMac and remove the power cord before installing memory. Do not attempt to install memory while your iMac is plugged in.

To install memory:

1 Turn off your iMac by choosing Apple () > Shut Down.

2 Disconnect all cables and the power cord from your iMac.

3 Place a soft, clean towel or cloth on your work surface. Hold the sides of your iMac and lay it down so that the screen rests on the surface and the bottom faces you.

Chapter 3 Boost Your Memory 37

4 Raise the stand and use a Phillips #2 screwdriver to loosen the three captive screws on the memory access door. Turn them counterclockwise.

Raise stand

Memory access door

Phillips screwdriver

5 Remove the memory access door and set it aside.

38 Chapter 3 Boost Your Memory

6 Untuck the tabs in the memory compartment.

7 To replace memory modules, pull the tab to eject the installed memory module.

Remove the memory modules you want to replace.

Untuck the tabs

Pull the tab

Chapter 3 Boost Your Memory 39

8 Insert the new memory modules in the slots with the notches facing right, as shown in the illustration.

Â If you install additional memory modules, insert them in the open slots.

Â If you replace the installed memory modules, insert a new memory module in each of the slots furthest from the display.

9 Press each memory module firmly and evenly into its slot. You’ll hear a slight click when the memory module is seated correctly.

10 Tuck the tabs into the memory compartment.

Memory modules

40 Chapter 3 Boost Your Memory

Tuck the tab

11 Replace the memory access door and tighten the three captive screws with a

Phillips #2 screwdriver.

WARNING: Remember to replace the memory access door after you install memory.

Your iMac won’t function properly without the memory access door.

Raise stand

Memory access door

Phillips screwdriver

12 Hold your iMac by its sides and return it to a standing position. Then reconnect the cables and power cord.

13 Press the power (®) button on the back of your iMac to turn it on.

Chapter 3 Boost Your Memory 41

Making Sure Your iMac Recognizes the New Memory

After installing memory, make sure your iMac recognizes the new memory.

To check the memory installed in your iMac:

1 Start up your iMac.

2 When you see the Mac OS X desktop, choose Apple () > About This Mac.

You’ll see the total amount of memory installed in your iMac. For a detailed view of the amount of memory installed, open System Profiler by clicking More Info.

If the memory you installed doesn’t meet specifications (see page 36), your iMac will

sound three tones every five seconds. If this happens, shut down your iMac and check the installation instructions again to make sure that the memory is compatible with your iMac and that it’s installed correctly. If you still have problems, remove the memory and consult the support information that came with the memory or contact the vendor who provided the memory.

42 Chapter 3 Boost Your Memory

Problem, Meet Solution

Mac Help

help

Occasionally you may have problems while working with your iMac. Read on for troubleshooting tips to try when you have a problem. You can also find more troubleshooting information in Mac Help or on the iMac Service & Support website at www.apple.com/support/imac.

If you experience a problem working with your iMac, there’s usually a simple and quick solution. If you encounter a problem, try to make a note of what you did before the problem occurred. This can help you narrow down the possible causes of the problem and then find the answers you need. Things to note:

Â The applications you were using when the problem occurred. Problems that occur only with a specific application may indicate that the application isn’t compatible with the version of Mac OS X installed on your iMac.

Â Any software that you recently installed.

Â Any new hardware (such as additional memory or a peripheral) that you connected or installed.

WARNING: Do not attempt to open your iMac, except to install memory. If your iMac

needs service, see “Learning More, Service, and Support” on page 57 for information

about how to contact Apple or an Apple Authorized Service Provider for service.

Your iMac doesn’t have any user-serviceable parts, except the memory.

44 Chapter 4 Problem, Meet Solution

Problems That Prevent You from Using Your iMac

If your iMac won’t respond or the pointer won’t move

Â Make sure your Apple Wireless Keyboard or Apple Magic Mouse are turned on and

the batteries are charged. (See “Replacing the Batteries” on page 47.)

If you’re using a USB keyboard or mouse, make sure they’re connected. Unplug and then plug in the connectors and make sure they are secure.

Â Try to force problem applications to quit. Hold down the Option and Command (x) keys and press the Esc key. If a dialog appears, select the application and click Force

Quit. Then save your work in any open applications and restart your iMac to be sure the problem is entirely cleared up.

Â If you’re unable to force the application to quit, hold down the power (®) button on the back of your iMac for five seconds to shut down the computer. Unplug the power cord from your iMac. Then plug the power cord back in and press the power (®) button on your iMac to turn it on.

If the problem reoccurs when you use a particular application, check with the application’s manufacturer to see if the application is compatible with your iMac.

For support and contact information about the software that came with your iMac, go to www.apple.com/guide or to the manufacturer’s website.

If the problem occurs frequently, try reinstalling your system software (see “Reinstalling the Software That Came with Your iMac” on page 54).

Chapter 4 Problem, Meet Solution 45

If your iMac freezes during startup or you see a flashing question mark

Â Wait a few seconds. If your iMac doesn’t start up after a delay, shut down your iMac by pressing and holding the power (®) button for about 5 seconds, until it shuts down. Then hold down the Option key and press the power (®) button again to start up your iMac. Keep holding down the Option key until your iMac starts up, then click the arrow under the icon of the startup disk you want to use.

Â After your iMac starts up, open System Preferences and click Startup Disk. Select a local Mac OS X System folder.

Â If the problem occurs frequently, you may need to reinstall your system software

(see “Reinstalling the Software That Came with Your iMac” on page 54).

If your iMac won’t turn on or start up

Â Make sure the power cord is plugged into your iMac and a functioning power outlet.

Â Press the power (®) button and immediately hold down the Command (x), Option, P, and R keys until you hear the startup sound a second time. This resets the parameter

RAM (PRAM).

Â If you recently installed memory, and your iMac sounds tones every five seconds, make sure that the memory is correctly installed and that it is compatible with your iMac. Check whether removing the memory you installed allows your iMac to start

up (see page 42).

Â Unplug the power cord and wait at least 30 seconds. Plug the power cord in again and press the power (®) button to start up your iMac.

If you still can’t start up your iMac, see “Learning More, Service, and Support” on page 57 for information about contacting Apple for service.

46 Chapter 4 Problem, Meet Solution

Replacing the Batteries

Your Apple Wireless Keyboard and Apple Magic Mouse each come with two

AA batteries installed. You can replace them with alkaline, lithium, or rechargeable

AA batteries.

Keep the battery compartment cover and batteries out of the reach of small children.

WARNING: When you replace the batteries, replace them all at the same time. Don’t mix old batteries with new batteries or mix battery types (for example, don’t mix alkaline and lithium batteries). Don’t open or puncture the batteries, install them backwards, or expose them to fire, high temperatures, or water. Keep batteries out of the reach of children.

To replace the batteries in the wireless keyboard:

1 Press the power (®) button to turn off your keyboard.

2 Use a coin to remove the battery compartment cover.

Battery compartment cover

Chapter 4 Problem, Meet Solution 47

3 Slide two AA batteries into the battery compartment, as shown below.

Insert batteries

4 Replace the battery compartment cover.

To check the battery status, press the power (®) button. If the indicator light doesn’t glow, you may need to change the batteries. You can check the battery level in

Keyboard preferences. Choose Apple () > System Preferences and click Keyboard.

The battery level is in the lower-left corner.

To replace the batteries in the Apple Magic Mouse:

1 Slide the on/off switch on the bottom of your mouse to turn it off.

2 Slide the latch down and remove the battery cover.

Latch Batteries

48 Chapter 4 Problem, Meet Solution

3 Insert the batteries with the positive (+) ends facing up, as shown above.

4 Replace the cover and turn on your mouse.

You may have to click your Apple Magic Mouse once to reconnect it to your iMac.

To check the battery status, slide the on/off switch to turn on the mouse. If the indicator light doesn’t glow, you may need to change the batteries. You can check the battery level in Mouse Preferences. Choose Apple () > System Preferences and click

Mouse. The battery level is shown in the lower-left corner.

Using Apple Hardware Test

If you suspect a problem with your iMac hardware, use the Apple Hardware Test application to help determine if there’s a problem with one of the computer’s components, such as the memory or processor.

To use Apple Hardware Test:

1 Disconnect all external devices from your iMac, except a USB keyboard and mouse, if you use them. If you have an Ethernet cable connected, disconnect it.

2 Restart your iMac while holding down the D key.

3 When the Apple Hardware Test language chooser screen appears, select the language you want to use.

4 Press the Return key or click the right arrow button.

5 When the Apple Hardware Test main screen appears (after about 45 seconds), follow the onscreen instructions.

Chapter 4 Problem, Meet Solution 49

6 If Apple Hardware Test detects a problem, it displays an error code. Make a note of the error code before pursuing support options. If Apple Hardware Test doesn’t detect a hardware failure, the problem may be software-related.

If this procedure doesn’t work, you can insert the Applications Install DVD that came with your iMac to use Apple Hardware Test. For more information, see the Apple

Hardware Test Read Me file on the Applications Install DVD.

Problems with Your Internet Connection

Your iMac has the Network Setup Assistant application to help walk you through setting up an Internet connection. Open System Preferences and click Network.

Click the “Assist me” button to open Network Setup Assistant.

If you have trouble with your Internet connection, you can try the steps in this section for your type of connection or you can use Network Diagnostics.

To use Network Diagnostics:

1 Choose Apple () > System Preferences.

2 Click Network and then click “Assist me.”

3 Click Diagnostics to open Network Diagnostics.

4 Follow the onscreen instructions.

If Network Diagnostics can’t resolve the problem, there may be a problem with the

Internet service provider (ISP) you are trying to connect to, with an external device you are using to connect to your ISP, or with the server you are trying to access. You can try the steps in the following sections.

50 Chapter 4 Problem, Meet Solution

Cable Modem, DSL Modem, and LAN Internet Connections

Make sure all modem cables are firmly plugged in, including the modem power cord, the cable from the modem to your iMac, and the cable from the modem to the wall jack. Also check the cables and power supplies to any Ethernet hubs or routers.

Turn the modem off and on and reset the modem hardware

Turn off your DSL or cable modem for a few minutes, and then turn it back on. Some

ISPs recommend that you unplug the modem’s power cord. If your modem has a reset button, you can press it either before or after you turn the power off and on.

Important: Instructions that refer to modems do not apply to LAN users. LAN users might have hubs, switches, routers, or connection pods that cable and DSL modem users do not have. LAN users should contact their network administrator rather than an ISP.

PPPoE Connections

If you are unable to connect to your ISP using PPPoE (Point to Point Protocol over

Ethernet), make sure you have entered the correct information in Network preferences.

To enter PPPoE settings:

1 Choose Apple () > System Preferences.

2 Click Network.

3 Click Add (+) at the bottom of the network connection services list, and choose PPPoE from the Interface pop-up menu.

4 Choose an interface for the PPPoE service from the Ethernet pop-up menu.

Choose Ethernet if you are connecting to a wired network, or AirPort if you are connecting to a wireless network.

Chapter 4 Problem, Meet Solution 51

5 Enter the information you received from your service provider, such as the account name, password, and PPPoE service name (if your service provider requires it).

6 Click Apply to make the settings active.

Network Connections

Make sure the Ethernet cable is plugged into your iMac and into the network.

Check the cables and power supplies to your Ethernet hubs and routers.

If you have two or more computers sharing an Internet connection, be sure that your network is set up properly. You need to know whether your ISP provides only one IP address or multiple IP addresses, one for each computer.

If only one IP address is provided, then you must have a router capable of sharing the connection, also known as network address translation (NAT) or “IP masquerading.”

For setup information, check the documentation provided with your router or ask the person who set up your network. The AirPort base station can be used to share one IP address among multiple computers. For information about using an AirPort base station, check Mac Help or visit the AirPort Extreme website at www.apple.com/support/airport.

If you can’t resolve the issue using these steps, contact your ISP or network administrator.

Problems with AirPort Wireless Communication

If you have trouble using AirPort wireless communication:

Â Make sure the computer or network you are trying to connect to is running and has a wireless access point.

52 Chapter 4 Problem, Meet Solution

Â Make sure you have properly configured the software according to the instructions that came with your base station or access point.

Â Make sure you are within antenna range of the other computer or the network’s access point. Nearby electronic devices or metal structures can interfere with wireless communication and reduce this range. Repositioning or rotating the computer might improve reception.

Â Check the AirPort (Z) status menu in the menu bar. Up to four bars appear, indicating signal strength. If the signal strength is weak, try changing your location.

Â See AirPort Help (choose Help > Mac Help, and then choose Library > AirPort Help from the menu bar). Also see the instructions that came with the wireless device for more information.

Keeping Your Software Up to Date

You can connect to the Internet and automatically download and install the latest free software versions, drivers, and other enhancements from Apple.

When you’re connected to the Internet, Software Update checks to see if any updates are available for your computer. You can set your iMac to check for updates periodically, and then you can download and install updated software.

To check for updated software:

1 Choose Apple () > System Preferences.

2 Click the Software Update icon and follow the onscreen instructions.

Â For more information, search for “Software Update” in Mac Help.

Â For the latest information about Mac OS X, go to www.apple.com/macosx.

Chapter 4 Problem, Meet Solution 53

When an Application Doesn’t Respond

On rare occasion, an application may “freeze.” Mac OS X provides a way to quit an application that’s not responding, without restarting your iMac. Quitting a frozen application may allow you to save your work in other open applications.

To force an application to quit:

1 Press Command (x)-Option-Esc or choose Apple () > Force Quit.

The Force Quit Applications dialog appears with the application selected.

2 Click Force Quit.

The application quits, leaving all other applications open.

Reinstalling the Software That Came with Your iMac

Use the software installation discs that came with your iMac to reinstall Mac OS X and any applications that came with your computer.

Important: Apple recommends that you back up the data on your hard disk before restoring software. Apple is not responsible for any lost data.

Installing Mac OS X

To install Mac OS X:

1 Back up your essential files.

2 Insert the Mac OS X Install DVD that came with your iMac.

54 Chapter 4 Problem, Meet Solution

3 Double-click Install Mac OS X.

4 Follow the onscreen instructions.

In the pane where you’re prompted to select a disk, select your current Mac OS X hard disk (in most cases, it’s the only one available).

5 To control which parts of Mac OS X are installed, click Customize, and then select the parts you want to install. Click the disclosure triangle next to Applications to select the checkboxes for any applications you want to install.

6 When the installation is complete, click Restart to restart your iMac.

7 Follow the prompts in Setup Assistant to set up your new user account.

If you want to erase and install, make sure you back up your user data before you start.

Use Disk Utility on your Mac OS X Install DVD to erase your hard drive. For information about Disk Utility and its options, see Mac Help, or open Disk Utility (in /Applications/

Utilities/) and choose Help > Disk Utility Help. You can also review detailed instructions in the following Kbase article: http://support.apple.com/kb/HT3910?

Installing iLife Applications

You can reinstall the iLife applications that came with your iMac if you accidentally delete them, or after you perform an erase and install.

To install the iLife applications that came with your iMac:

1 Insert the Applications Install DVD that came with your iMac.

2 Follow the onscreen instructions. In the Installation Type pane, click Customize.

3 When the installation is complete, click Close.

Chapter 4 Problem, Meet Solution 55

Learning More, Service, and Support

Your iMac does not have any user-serviceable parts, except the keyboard, mouse, and memory. If you need service, contact Apple or take your iMac to an Apple Authorized

Service Provider. You can find more information about your iMac through online resources, onscreen help, System Profiler, or Apple Hardware Test.

Online Resources

For online service and support information, go to www.apple.com/support. Choose your country from the pop-up menu. You can search the AppleCare Knowledge Base, check for software updates, or get help on Apple’s discussion forums.

Chapter 4 Problem, Meet Solution 57

Onscreen Help

You can often find answers to your questions, as well as instructions and troubleshooting information, in Mac Help. Choose Help > Mac Help.

System Profiler

To get information about your iMac, use System Profiler. It shows you what hardware and software is installed, the serial number and operating system version, how much memory is installed, and more. To open System Profiler, choose Apple () > About This

Mac from the menu bar and then click More Info.

AppleCare Service and Support

Your iMac comes with 90 days of technical support and one year of hardware repair warranty coverage at an Apple Retail Store or an Apple-authorized repair center, such as an Apple Authorized Service Provider. You can extend your coverage by purchasing the AppleCare Protection Plan. For information, visit www.apple.com/support/products or visit the website address for your country listed below.

If you need assistance, AppleCare telephone support representatives can help you with installing and opening applications, and basic troubleshooting. Call the support center number nearest you (the first 90 days are complimentary). Have the purchase date and your iMac serial number ready when you call.

58 Chapter 4 Problem, Meet Solution

Note: Your 90 days of complimentary telephone support begins on the date of purchase and telephone fees may apply.

Country

United States

Australia

Canada (English)

(French)

Ireland

New Zealand

United Kingdom

Phone

1-800-275-2273

(61) 1-300-321-456

1-800-263-3394

(353) 1850 946 191

00800-7666-7666

(44) 0844 209 0611

Website www.apple.com/support www.apple.com/au/support www.apple.com/ca/support www.apple.com/ca/fr/support www.apple.com/ie/support www.apple.com/nz/support www.apple.com/uk/support

Telephone numbers are subject to change, and local and national telephone rates may apply. A complete list is available on the web: www.apple.com/support/contact/phone_contacts.html

Chapter 4 Problem, Meet Solution 59

Locating Your Product Serial Number

Use any of these methods to find the serial number of your iMac:

Â Choose Apple () > About This Mac. Click the version number beneath the words

“Mac OS X” to cycle through the Mac OS X version number, the build version, and the serial number.

Â Click the Finder icon and open /Applications/Utilities/System Profiler. Click Hardware in the Contents pane.

Â Look on the bottom of the iMac stand.

60 Chapter 4 Problem, Meet Solution

Last, but Not Least

www.apple.com/environment

Mac Help

ergonomics

For your safety and that of your equipment, follow these rules for handling and cleaning your iMac and for working more comfortably. Keep these instructions handy for reference by you and others.

NOTICE: Incorrect storage or use of your computer may void the manufacturer’s warranty.

Important Safety Information

WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.

Proper handling Set up your iMac on a stable work surface. Never push objects into the ventilation openings.

Water and wet locations Keep your iMac away from sources of liquid, such as drinks, washbasins, bathtubs, shower stalls, and so on. Protect your iMac from dampness or wet weather, such as rain, snow, and fog.

Power The only way to disconnect power completely is to unplug the power cord.

Make sure you pull the plug, not the cord. Always unplug the power cord before opening your iMac to install memory.

62 Chapter 5 Last, but Not Least

Unplug the power cord (by pulling the plug, not the cord) and disconnect the ethernet cable or phone cord if any of the following conditions exist:

Â You want to add memory

Â The power cord or plug becomes frayed or otherwise damaged

Â You spill something into the case

Â Your iMac is exposed to rain or excess moisture

Â Your iMac has been dropped or the case has been damaged

Â You suspect that your iMac needs service or repair

Â You want to clean the case (use only the recommended procedure described later)

Important: The only way to turn off power completely is to unplug the power cord.

Make sure at least one end of the power cord is within easy reach so that you can unplug your iMac when you need to.

WARNING: Your AC cord has a three-wire grounding plug (a plug that has a third, grounding pin). This plug fits only a grounded AC outlet. If you are unable to insert the plug into an outlet because the outlet isn’t grounded, contact a licensed electrician to replace the outlet with a properly grounded outlet. Do not defeat the purpose of the grounding plug.

Chapter 5 Last, but Not Least 63

Power specifications:

Â Voltage: 100 to 240 V AC

Â Current: 3 A, maximum

Â Frequency: 50 to 60 Hz

Hearing damage Permanent hearing loss may occur if earbuds or headphones are used at high volume. Set the volume to a safe level. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing.

If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected. Hearing experts suggest that to protect your hearing:

Â Limit the amount of time you use earbuds or headphones at high volume.

Â Avoid turning up the volume to block out noisy surroundings.

Â Turn the volume down if you can’t hear people speaking near you.

High-risk activities This computer system is not intended for use in the operation of nuclear facilities, aircraft navigation or communications systems, air traffic control systems, or for any other uses where the failure of the computer system could lead to death, personal injury, or severe environmental damage.

64 Chapter 5 Last, but Not Least

Laser Information for Optical Disc Drives

WARNING: Making adjustments or performing procedures other than those specified in your equipment’s manual may result in hazardous radiation exposure.

The optical disc drive in your iMac contains a laser that is safe in normal use but that may be harmful to your eyes if disassembled. For your safety, have this equipment serviced only by an Apple Authorized Service Provider.

Important: Electrical equipment may be hazardous if misused. Operation of this product, or similar products, must always be supervised by an adult. Do not allow children access to the interior of any electrical product and do not permit them to handle any cables.

WARNING: Never push objects of any kind into this product through the ventilation openings in the case. Doing so may be dangerous and damage your computer.

Do Not Make Repairs Yourself

Your iMac has no user-serviceable parts, except the keyboard, mouse, and memory

(see “Installing Memory” on page 37). Do not attempt to open your iMac. If your iMac

needs service, contact an Apple Authorized Service Provider or Apple for service. See

“Learning More, Service, and Support” on page 57.

If you open your iMac or install items other than memory, you risk damaging your equipment. Such damage isn’t covered by the limited warranty on your iMac.

Chapter 5 Last, but Not Least 65

Important Handling Information

NOTICE: Failure to follow these handling instructions could result in damage to your iMac or other property.

Operating environment Operating your iMac outside these ranges may affect performance:

Â Operating temperature: 50° to 95° F (10° to 35° C)

Â Storage temperature: -4° to 116° F (-20° to 47° C)

Â Relative humidity: 5% to 95% (noncondensing)

Â Maximum operating altitude: 10,000 feet (3048 meters)

Do not operate your iMac in areas with significant amounts of airborne dust, or smoke from cigarettes, cigars, ashtrays, stoves, or fireplaces, or near an ultrasonic humidifier using unfiltered tap water. Tiny airborne particles produced by smoking, cooking, burning, or using an ultrasonic humidifier with unfiltered water may, in rare instances, enter the ventilation openings of your iMac and, under certain conditions, result in a slight haze on the inside surface of the glass panel that covers the iMac display.

Turning on your iMac Never turn on your iMac unless all of its internal and external parts are in place. Operating the computer when parts are missing may be dangerous and may damage your computer.

Carrying your iMac Before you lift or reposition your iMac, shut it down and disconnect all cables and cords connected to it. To lift or move your iMac, hold its sides.

66 Chapter 5 Last, but Not Least

Using connectors and ports Never force a connector into a port. When connecting a device, make sure the port is free of debris, that the connector matches the port, and that you have positioned the connector correctly in relation to the port.

Using the optical drive The SuperDrive in your iMac supports standard 12 cm

(4.7 inch) discs. Irregularly shaped discs or discs smaller than 12 cm (4.7 inches) are not supported.

Storing your iMac If you are going to store your iMac for an extended period of time, keep it in a cool location (ideally, 71° F or 22° C).

Cleaning Your iMac

Follow these guidelines when cleaning the outside of your iMac and its components:

Â Shut down your iMac and disconnect all cables.

Â Use a damp, soft, lint-free cloth to clean the exterior of your iMac. Avoid getting moisture in any openings. Do not spray liquid directly on your iMac.

Â Don’t use aerosol sprays, solvents, or abrasives.

Cleaning Your iMac Display

Use the cloth that came with your iMac to clean the display.

To clean your iMac display, do the following:

Â Shut down your iMac and disconnect all cables.

Â Dampen the cloth that came with your iMac—or another clean, soft, lint-free cloth— with water only, and then wipe the screen. Do not spray liquid directly on the screen.

Chapter 5 Last, but Not Least 67

Cleaning Your Mouse

You may need to clean your mouse from time to time to remove dirt and dust that has accumulated. Use a lint-free cloth that’s been lightly moistened with water. Don’t get moisture in any openings or use aerosol sprays, solvents, or abrasives.

If you ordered an Apple USB mouse with your iMac, hold the mouse upside-down and roll the scroll ball vigorously with the cloth that came with your iMac, or another clean, soft, lint-free cloth, to help dislodge any particles that may interfere with proper scrolling.

Understanding Ergonomics

Here are some tips for setting up a healthy work environment.

Keyboard

When you use the keyboard, your shoulders should be relaxed. Your upper arm and forearm should form an approximate right angle, with your wrist and hand in roughly a straight line.

Change hand positions often to avoid fatigue. Some computer users might develop discomfort in their hands, wrists, or arms after intensive work without breaks. If you begin to develop chronic pain or discomfort in your hands, wrists, or arms, consult a qualified health specialist.

Mouse

Position the mouse at the same height as the keyboard and within a comfortable reach.

68 Chapter 5 Last, but Not Least

Display

Arrange the display so that the top of the screen is slightly below eye level when you’re sitting at the keyboard. The best distance from your eyes to the screen is up to you, although most people seem to prefer 18 to 28 inches (45 to 70 cm).

Position the display to minimize glare and reflections on the screen from overhead lights and nearby windows. The stand lets you set the display at the best angle for viewing, helping to reduce or eliminate glare from lighting sources you can’t move.

Shoulders relaxed

18–28 in. (45–70 cm) Top of the screen at or slightly below eye level

Forearms and hands in a straight line

Screen positioned to avoid reflected glare

Forearms level or tilted slightly

Lower back supported

Clearance under work surface

Thighs tilted slightly

Feet flat on the floor or on a footrest

Chapter 5 Last, but Not Least 69

Chair

An adjustable chair that provides firm, comfortable support is best. Adjust the height of the chair so your thighs are horizontal and your feet are flat on the floor. The back of the chair should support your lower back (lumbar region). Follow the manufacturer’s instructions for adjusting the backrest to fit your body properly.

You might have to raise your chair so that your forearms and hands are at the proper angle to the keyboard. If this makes it impossible to rest your feet flat on the floor, use a footrest with adjustable height and tilt to make up for any gap between the floor and your feet. Or you can lower the desktop to eliminate the need for a footrest. Another option is to use a desk with a keyboard tray that’s lower than the regular work surface.

More information about ergonomics is available on the web: www.apple.com/about/ergonomics

Apple and the Environment

Apple Inc. recognizes its responsibility to minimize the environmental impact of its operations and products.

More information is available on the web: www.apple.com/environment

70 Chapter 5 Last, but Not Least

Regulatory Compliance Information

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected.

L‘utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.

Radio and Television Interference

This computer equipment generates, uses, and can radiate radiofrequency energy. If it is not installed and used properly—that is, in strict accordance with Apple’s instructions—it may cause interference with radio and television reception.

This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.

You can determine whether your computer system is causing interference by turning it off. If the interference stops, it was probably caused by the computer or one of the peripheral devices.

If your computer system does cause interference to radio or television reception, try to correct the interference by using one or more of the following measures:

• Turn the television or radio antenna until the interference stops.

• Move the computer to one side or the other of the television or radio.

• Move the computer farther away from the television or radio.

• Plug the computer into an outlet that is on a different circuit from the television or radio. (That is, make certain the computer and the television or radio are on circuits controlled by different circuit breakers or fuses.)

If necessary, consult an Apple Authorized Service Provider or

Apple. See the service and support information that came with your Apple product. Or consult an experienced radio/television technician for additional suggestions.

Important: Changes or modifications to this product not authorized by Apple Inc. could void the EMC compliance and negate your authority to operate the product.

This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables (including

Ethernet network cables) between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices.

Responsible party (contact for FCC matters only):

Apple Inc. Corporate Compliance

1 Infinite Loop, MS 26-A

Cupertino, CA 95014

Wireless Radio Use

This device is restricted to indoor use when operating in the 5.15 to

5.25 GHz frequency band.

Cet appareil doit être utilisé à l’intérieur.

この製品は、周波数帯域 5.18 ~ 5.32 GHz で動作しているときは、

屋内においてのみ使用可能です。

Exposure to Radio Frequency Energy

The radiated output power of this device is well below the FCC and EU radio frequency exposure limits. However, this device should be operated with a minimum distance of at least 20 cm between its antennas and a person’s body and the antennas used with this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant.

FCC Bluetooth Wireless Compliance

The antenna used with this transmitter must not be colocated or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant.

Bluetooth Industry Canada Statement

This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Class B respecte toutes les exigences du

Règlement sur le matériel brouilleur du Canada.

Industry Canada Statement

Complies with the Canadian ICES-003 Class B specifications.

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada. This device complies with RSS 210 of Industry

Canada.

Bluetooth Europe—EU Declaration of Conformity

This wireless device complies with the R&TTE Directive.

Europe—EU Declaration of Conformity

See www.apple.com/euro/compliance.

Taiwan Wireless Statements

Taiwan Class B Statement

VCCI Class B Statement European Community

Complies with European Directives 72/23/EEC and 89/336/EEC.

Korea Warning Statements

Russia

Singapore Wireless Certification

Mouse Class 1 Laser Information

The Apple Magic Mouse is a Class 1 laser product in accordance with IEC60825-1 A1 A2 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001.

Caution: Modification of this device may result in hazardous radiation exposure. For your safety, have this equipment serviced only by an Apple Authorized Service Provider.

A Class 1 laser is safe under reasonably foreseeable conditions per the requirements in IEC 60825-1 AND 21 CFR 1040. However, it is recommended that you do not direct the laser beam at anyone’s eyes.

External USB Modem Information

When connecting your iMac to the phone line using an external

USB modem, refer to the telecommunications agency information in the documentation that came with your modem.

ENERGY STAR ® Compliance

As an ENERGY STAR ® partner, Apple has determined that standard configurations of this product meet the ENERGY STAR ® guidelines for energy efficiency. The ENERGY STAR ® program is a partnership with electronic equipment manufacturers to promote energyefficient products. Reducing energy consumption of products saves money and helps conserve valuable resources.

This computer is shipped with power management enabled with the computer set to sleep after 10 minutes of user inactivity. To wake your computer, click the mouse or press any key on the keyboard.

For more information about ENERGY STAR ® www.energystar.gov

, visit:

Türkiye

Disposal and Recycling Information

This symbol indicates that your product must be disposed of properly according to local laws and regulations. When your product reaches its end of life, contact Apple or your local authorities to learn about recycling options.

For information about Apple’s recycling program, go to www.apple.com/environment/recycling.

Brazil—Disposal Information:

Brasil: Informações sobre eliminação e reciclagem

O símbolo indica que este produto e/ou sua bateria não devem ser descartadas no lixo doméstico. Quando decidir descartar este produto e/ou sua bateria, faça-o de acordo com as leis e diretrizes ambientais locais. Para informações sobre o programa de reciclagem da Apple, pontos de coleta e telefone de informações, visite www.apple.com/br/environment.

European Union—Disposal Information:

Attenzione: C’è rischio di esplosione se la batteria viene sostituita con un tipo di batteria non corretto. Smaltire le batterie usate secondo le istruzioni riportate in questo manuale.

VARNING: Om batteriet ersätts med ett batteri av fel typ finns det risk för explosion. Lämna in batteriet för återvinning i enlighet med anvisningarna i denna handbok.

Battery Disposal Information

Dispose of batteries according to your local environmental laws and guidelines.

California: The coin cell battery in the optional Apple Remote contains perchlorates. Special handling and disposal may apply.

Refer to: www.dtsc.ca.gov/hazardouswaste/perchlorate

Deutschland: Dieses Gerät enthält Batterien. Bitte nicht in den

Hausmüll werfen. Entsorgen Sie dieses Gerätes am Ende seines

Lebenszyklus entsprechend der maßgeblichen gesetzlichen

Regelungen.

Das Gerät enthält Batterien. Diese gehören nicht in den

Hausmüll. Sie können verbrauchte Batterien beim Handel oder bei den Kommunen unentgeltlich abgeben. Um Kurzschlüsse zu vermeiden, kleben Sie die Pole der Batterien vorsorglich mit einem

Klebestreifen ab.

Nederlands: Gebruikte batterijen kunnen worden ingeleverd bij de chemokar of in een speciale batterijcontainer voor klein chemisch afval (kca) worden gedeponeerd.

Taiwan:

The symbol above means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

Caution: There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions in this manual.

Achtung: Wenn die Batterie nicht mit dem richtigen Batterietyp ersetzt wird, besteht Explosionsgefahr. Entsorgen Sie verbrauchte

Batterien gemäß der Anweisungen in diesem Handbuch.

Looking for Something?

Index

A

AirPort Extreme

Apple Hardware Test 49

Apple Magic Mouse 25, 28, 48

Apple Remote 15, 30, 33

Apple Wireless Keyboard 25,

applications

iLife 32, 55 installing 55

stopping 54

transferring 14

assistants

Migration Assistant 14

Network Setup Assistant 50

Setup Assistant 14

audio in/optical digital audio in

port 21

B

batteries

Bluetooth technology

built-in

iSight camera 19 microphone 19 speakers 19

button, power 15

C

cable modem 11

camera

indicator light 19 iSight 19

carrying your computer 66

chair 70

changing

System Preferences 14 the desktop 14

cleaning

computer. See iMac

connecting

a USB keyboard 12 a USB mouse 12

cable modem 11 dial-up modem 11

DSL modem 11

FireWire devices 21 headphones 21

to a network 11

USB devices 21

controls

brightness 25 eject CD or DVD 25 media 25 volume 25

D

Dashboard key 25

date and time settings 57

deauthorize iTunes 14 desktop, customizing 14

76 Looking for Something?

dial-up connection 11

DIMMs. See memory

discs, supported types 67

display

cleaning 67

ergonomics 69

Dock 32

downloading software 53

DSL modem 11

E

external USB modem 11, 21, 73

F

F1 to F12 function keys 25

factory settings 54

FireWire

connections 33

port 21

flashing question mark 46

Force Quit, an application 45,

Front Row application 33

frozen application 54

function keys 25

H

hand positions 68

headphone port 21

I

iChat application 19

iLife applications 32, 55

iMac

back view 22

cleaning 67

features 18 front view 18

indicator light

installing

Internet

connection problems 50

address sharing 52 masquerading 52

iSight 19

iTunes, deauthoring 14 iTunes Store 14

K

keyboard

keys

Media Eject 25 volume 25

M

Mac Help 8, 14, 32, 44, 58

Mac OS X

installing 54

website 32

Magic Mouse 25, 28, 48

Media Eject Key 25 media keys 25

Looking for Something?

memory

access door 23, 38

how much is installed 42

installing 37

microphone 19

Migration Assistant 14

modem

cable 21

DSL 21

external USB 11, 21, 73

mouse

N

network

address translation (NAT) 52

connecting to 11

connection problems 52

diagnostics 50 setup assistant 50

wireless 11

Network Setup Assistant 50

O

online resources 57

onscreen help 58

operating environment 66

optical digital audio 21

optical drive

about 19

safety 65

supported disc sizes 67

P

pairing

keyboard 27

mouse 29

remote 31

parameter RAM, resetting 46

ports

audio in 21 audio out 21

Ethernet 21

FireWire 800 21 headphone 21

overview 20

power 10, 23

USB 12, 21

power button 12, 23 power port 10, 23

power specifications 64

PPPoE connections 51

problems. See troubleshooting

Q

question mark, flashing 46

R

RAM. See memory

reinstalling software 54

replacing batteries 47, 48

resetting paramater RAM

(PRAM) 46

S

safety

important information 62

optical drive 65

screen brightness, setting 25

SD card slot 19

SDRAM. See memory

security slot 23

serial number 60

service and support 57, 58

setting up your iMac 10

Setup Assistant 14

shutting down

before installing memory 37

the computer 16

sleep 15

software

installation discs 54

updating 53

Software Update 53

S/PDIF stereo 21 speakers 19, 21

78 Looking for Something?

specifications

in System Profiler 33

operating environment 66

power 64

stopping an application 54

storing your iMac 67

SuperDrive

about 19

supported disc sizes 67

support and service 57, 58

System Preferences

customizing the desktop 14

Energy Saver 15

Software Update 53, 56

Startup Disk 46

System Profiler 58

T

transferring information 14

troubleshooting

AirPort connection 52

AppleCare 58

computer freezes during

startup 46

computer won’t respond 45

computer won’t turn on 46

date and time settings 57

ejecting a disc 56

force an application to

quit 45

Internet connection 50

PPPoE connections 51

reinstalling Mac OS X 54

resetting PRAM 46

service and support 57

using Mac Help 58

turning on your iMac 13

typing position 68

U

updating software 53

USB

connections 33

keyboard, connecting 12 mouse, connecting 12

ports 21

user account

setting up 14 transferring information 14

V

Volume keys 25

W

wake from sleep 15

wireless

AirPort Extreme 23

Bluetooth technology 23

keyboard 12, 27

mouse 12, 28

networking 11

Looking for Something?

K Apple Inc.

Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple.

Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors.

Apple

1 Infinite Loop

Cupertino, CA 95014

408-996-1010 www.apple.com

The Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo (Option-

Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws.

Apple, the Apple logo, AirPort, AirPort Extreme, Cover Flow, Exposé,

FireWire, GarageBand, iCal, iChat, iLife, iMac, iMovie, iPhone, iPhoto, iPod, iSight, iTunes, Keynote, Mac, Mac OS, Photo Booth, QuickTime,

Safari, Snow Leopard, Spotlight, SuperDrive, and Time Machine are trademarks of Apple Inc., registered in the U.S. and other countries.

Finder, the FireWire logo, iPad, and Multi-Touch are trademarks of Apple Inc.

AppleCare, Apple Store, and iTunes Store are service marks of

Apple Inc., registered in the U.S. and other countries.

ENERGY STAR ® is a U.S. registered trademark.

The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Apple is under license.

Other company and product names mentioned herein may be trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the performance or use of these products.

Manufactured under license from Dolby Laboratories. “Dolby,”

“Pro Logic,” and the double-D symbol are trademarks of Dolby

Simultaneously published in the United States and Canada.

Hello! I am an AI chatbot specifically trained to assist you with the Apple MC511LL/A User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant is out of keyboard. Please, try again later.