Chevrolet | Beat diesel | Specifications | Chevrolet Beat diesel Specifications

DIESEL
General Motors India Pvt. Ltd.
All information, illustrations and specifications contained in this Owner's Manual are based on
the latest production information available at the time of publication. The right is reserved to
make changes at any time without notice.
24 Hr. Helpline at 1800 3000 8080
24x7 Roadside Assistance at 1800 103 8090 (Toll Free No.) or 0124 - 4388090
Part No.: 28287059
Revision No. 02
Revision Date
08/2014/1,020
DIESEL
Regd. Office : Chandrapura Industrial Estate, Halol - 389 351
Dist. Panchmahals, Gujarat, India. Phone : 91 2676 221000
Customer Assistance Center : Plot No. 15, Echelon Institutional Area,
Sector 32, Gurgaon - 122 001, Haryana, India. Tel.: 91 124 3080000
Works : A-16, MIDC Talegaon Industrial Area (Phase-II),
Near Floriculture Park, Talegaon Navlakh Umbhre Village Road, Tehsil-Maval,
Pune - 410 507, Maharashtra, India. Tel: 91 2114 663939
DIESEL
General Motors India Pvt. Ltd.
All information, illustrations and specifications contained in this Owner's Manual are based on
the latest production information available at the time of publication. The right is reserved to
make changes at any time without notice.
24 Hr. Helpline at 1800 3000 8080
24x7 Roadside Assistance at 1800 103 8090 (Toll Free No.) or 0124 - 4388090
Part No.: 28287059
Revision No. 02
Revision Date
08/2014/1,020
DIESEL
Regd. Office : Chandrapura Industrial Estate, Halol - 389 351
Dist. Panchmahals, Gujarat, India. Phone : 91 2676 221000
Customer Assistance Center : Plot No. 15, Echelon Institutional Area,
Sector 32, Gurgaon - 122 001, Haryana, India. Tel.: 91 124 3080000
Works : A-16, MIDC Talegaon Industrial Area (Phase-II),
Near Floriculture Park, Talegaon Navlakh Umbhre Village Road, Tehsil-Maval,
Pune - 410 507, Maharashtra, India. Tel: 91 2114 663939
DIESEL
General Motors India Pvt. Ltd.
All information, illustrations and specifications contained in this Owner's Manual are based on
the latest production information available at the time of publication. The right is reserved to
make changes at any time without notice.
24 Hr. Helpline at 1800 3000 8080
24x7 Roadside Assistance at 1800 103 8090 (Toll Free No.) or 0124 - 4388090
Part No.: 28287059
Revision No. 02
Revision Date
08/2014/1,020
DIESEL
Regd. Office : Chandrapura Industrial Estate, Halol - 389 351
Dist. Panchmahals, Gujarat, India. Phone : 91 2676 221000
Customer Assistance Center : Plot No. 15, Echelon Institutional Area,
Sector 32, Gurgaon - 122 001, Haryana, India. Tel.: 91 124 3080000
Works : A-16, MIDC Talegaon Industrial Area (Phase-II),
Near Floriculture Park, Talegaon Navlakh Umbhre Village Road, Tehsil-Maval,
Pune - 410 507, Maharashtra, India. Tel: 91 2114 663939
DIESEL
General Motors India Pvt. Ltd.
All information, illustrations and specifications contained in this Owner's Manual are based on
the latest production information available at the time of publication. The right is reserved to
make changes at any time without notice.
24 Hr. Helpline at 1800 3000 8080
24x7 Roadside Assistance at 1800 103 8090 (Toll Free No.) or 0124 - 4388090
Part No.: 28287059
Revision No. 02
Revision Date
08/2014/1,020
DIESEL
Regd. Office : Chandrapura Industrial Estate, Halol - 389 351
Dist. Panchmahals, Gujarat, India. Phone : 91 2676 221000
Customer Assistance Center : Plot No. 15, Echelon Institutional Area,
Sector 32, Gurgaon - 122 001, Haryana, India. Tel.: 91 124 3080000
Works : A-16, MIDC Talegaon Industrial Area (Phase-II),
Near Floriculture Park, Talegaon Navlakh Umbhre Village Road, Tehsil-Maval,
Pune - 410 507, Maharashtra, India. Tel: 91 2114 663939
Dear Customer,
Welcome to the Chevrolet family. We wish to thank you for choosing Chevrolet Beat.
It is our constant endeavor to provide you with products that offer excellent performance through out their ownership period. Which is
why, in addition to offering great cars, we have also set up an extensive, and very well equipped network of retailers and authorized
service centers across the country.
Naturally, these Chevrolet retailer know everything about your car and provides you with the best service possible. In fact, every retailer
is equipped with the most advanced technology, technicians specially trained by us and genuine spares. Needless to say, they are also
committed to ensure your complete satisfaction.
So, please contact a Chevrolet retailer for any servicing need and make sure that only genuine spares are used for your car.
This Manual will familiarize you with the operation and maintenance of your new vehicle. It will also provide you with important safety
information. Please do read it carefully and follow the recommendations. In fact, the Manual is like a permanent part of your car. And it
would go a long way in ensuring a safe and trouble-free operation for your car.
Should you have any query please feel free to call our 24 hr. Helpline at 1800 3000 8080 or email us at : gmi.cac@gm.com.
Happy Motoring
CONTENTS
Introduction ...................................... 3
Initial drive information ................... 5
Keys, doors and windows .............. 15
Seats and restraints ......................... 23
Storage ........................................... 45
Instruments and controls ................ 51
Lighting .......................................... 63
Infotainment system*...................... 69
Climate control ............................... 79
Driving and operating .................... 85
Vehicle care .................................... 97
Service and maintenance .............. 133
Technical data .............................. 139
Service and warranty .................... 143
24x7 Roadside assistance ............. 175
Service network ........................... 183
Introduction 3
INTRODUCTION
INTRODUCTION
Introduction ...................................... 3
Using this Manual ............................. 3
Danger, warnings and cautions ........ 4
Your vehicle is a designed combination
of advanced technology, safety, environmental friendliness and economy.
This Owner's Manual provides you
with all the necessary information to
enable you to drive your vehicle safely
and efficiently.
Make sure your passengers are aware of
the possible risk of accident and injury
which may result from improper use of
the vehicle.
You must always comply with the
specific laws and regulations of the
country that you are in. These laws may
differ from the information in this
Owner's Manual.
When this Owner's Manual refers to a
CHEVROLET retailer visit, we
recommend your Chevrolet Service
Partner.
All Chevrolet Service Partners provide
first-class service at reasonable prices.
Experienced mechanics trained by
Chevrolet according to specific
Chevrolet instructions.
The customer literature pack should
always be kept ready to hand in the vehicle.
USING THIS MANUAL
n
n
n
n
n
This Manual describes all options and
features available for this model.
Certain descriptions, including
those for display and menu
functions, may not apply to your
vehicle due to model variant,
country specifications, special
equipment or accessories.
This section will give you an initial
overview.
The table of contents at the beginning
of this Manual and within each chapter
shows where the information is
located.
The Owner's Manual uses the
factory engine designations. The
corresponding sales designations
can be found in the chapter
"Technical data".
Directional data e.g. left or right, or
front or back, always relate to the
direction of travel.
4 Introduction
The vehicle display screens may
not support your specific language.
n Display messages and interior
labelling are written in bold letters.
n
DANGER, WARNINGS AND
CAUTIONS
Danger
Text marked Danger provides
information on risk of fatal injury.
Disregarding this information may
endanger life.
Warning
Text marked Warning provides
information on risk of accident or
injury. Disregarding this information
may lead to injury.
Caution
Text marked Caution provides
information on possible damage to
the vehicle. Disregarding this
information may lead to vehicle
damage.
Note
Text marked Note indicates a point
to take into account when operating
the vehicle. Failure to observe this
may lead to incorrect operation.
* or (Option) : The asterisk and
(Option) in this Manual signify an item
of equipment that is not included on all
vehicles. Such items include engine
options, model variations specific to
one country, and optional equipment.
All information, illustrations, and
specifications in this Manual are based
on the latest product information
available at the time of publication.
General Motors India Pvt. Ltd. reserves
the right to change specifications or
designs at any time without notice and
without incurring obligation.
This vehicle may not comply with the
standards or regulations of other
countries. Before attempting to register
this vehicle in any other country, check
all applicable regulations and make any
necessary modifications.
This Manual describes the options and
trims available at the time of publication. Some of the items covered may not
apply to your vehicle. Contact your
CHEVROLET retailer for information
on option and trim availability.
Non-General Motors India Pvt. Ltd.
genuine parts and accessories have not
been examined or approved by General
Motors India Pvt. Ltd. We can certify
neither the suitability nor the safety of
Non-General Motors India Pvt. Ltd.
genuine parts and accessories and are
not liable for damage caused by their
use.
Warning : Tampering of wiring
harness or fitment of non genuine
accessories in your vehicle may lead to
short circuit resulting in fire.
We wish you many hours of pleasurable
driving Chevrolet.
Initial Drive Information 5
INITIAL DRIVE
INFORMATION
Seat adjustment ................................ 5
Safety belts ....................................... 6
Mirror adjustment ............................ 7
Steering wheel adjustment* .............. 7
Instrument panel overview ............... 8
Exterior lighting ............................... 9
Horn ............................................... 10
Washer and wiper systems .............. 11
Climate control ............................... 11
Transmission .................................. 12
Getting started................................. 12
Parking ........................................... 13
SEAT ADJUSTMENT
Seat Positioning
Seat Backrest
Pull handle, slide seat, release handle.
See Seat adjustment on page 33.
See Seat positioning on page 33.
Pull lever, adjust inclination and release
lever. Allow the seat to engage audibly.
Do not lean on seat backrest when
adjusting.
6 Initial Drive Information
SAFETY BELTS
Head Restraint Adjustment
Seat Height Adjustment *
(Driver’s Seat)
Pull the head restraint upwards.
To move down press the release button
and push the head restraint downwards.
To pull out a head restraint completely,
press the release button and take out the
head restraint.
See Head restraints on page 31.
To adjust the height of the entire seat
cushion, rotate the knob.
Rotate the knob clock-wise to move up
and anti-clock wise to move down.
Withdraw belt from reel, guide it
untwisted across the body and engage
the latch plate in the buckle.
To release the belt, press the red button
on the belt buckle.
See Safety belts on page 35.
See Airbag system on page 35.
See Seat positioning on page 33.
Initial Drive Information 7
STEERING WHEEL
ADJUSTMENT*
MIRROR ADJUSTMENT
Interior Mirror
Exterior Mirrors
To adjust the inside rearview mirror,
hold the rearview mirror in the center
and move it to view the area behind the
vehicle.
To reduce dazzle, adjust the lever on the
underside of the mirror housing.
See Manual rear view mirror on page
19.
Simply move the adjusting lever in the
desired direction to adjust the mirror
angles.
See Convex mirrors on page 18.
See Folding mirrors on page 18.
Unlock lever, adjust steering wheel,
then engage lever and ensure it is fully
locked. Do not adjust steering wheel
unless vehicle is stationary.
See Airbag system on page 35.
See Ignition switch positions on page
88.
8 Initial Drive Information
INSTRUMENT PANEL OVERVIEW
1
9
6
20 8
7 6
2
21
4
3
5
1
PWR
+
-
MODE
SEEK
10
11
12
16 17 14
13 15 18
19
Initial Drive Information 9
EXTERIOR LIGHTING
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
Side air vents
Wiper and washer lever
Horn, Driver airbag
Cluster
Exterior lamp lever
Center air vents
Infotainment system
Hazard warning switch
Passenger airbag
Glove box
Climate control system
Shift lever
Accelerator pedal
Brake pedal
Ignition switch
Clutch pedal
Steering wheel adjustment
Hood release lever
Headlamp range adjustment
Telltale IP display unit
Steering wheel audio control
switch
Exterior Lamp Controls
ON
OFF
Headlamp High/Low-Beam
Change
ON
OFF
Turn light switch.
OFF : All the lamps are off.
: The parking lamps, tail lamps,
number plate lamps and
instrument panel lamps are
illuminated.
: The low-beam headlamps and
all of the above lamps are
illuminated.
See Exterior lamp controls on page 63.
OFF
OFF
To switch from low to high beam, push
lever.
To switch to low beam, pull lever.
See Headlamp high/low-beam changer
on page 64.
See Flash-to-pass on page 64.
10 Initial Drive Information
HORN
Hazard Warning Flashers
Turn And Lane-Change Signals
ON
OFF
Operated with the button.
See Hazard warning flashers on page
65.
OFF
Lever up = Left indicator
Lever down = Right indicator
See Turn and lane-change signals on
page 66.
Press the
switch on the steering
wheel pad to sound the horn.
Initial Drive Information 11
WASHER AND WIPER
SYSTEMS
Windshield Wipers
OFF
INT
LO
HI
OFF : System off.
INT : Intermittent operation.
LO : Continuous wipe, slow speed.
HI : Continuous wipe, fast speed.
For a single wipe when the windshield
wipers are off, lightly move the lever
towards the INT position and release it.
See Windshield wiper/washer on page
52.
CLIMATE CONTROL
Windshield Washer
Heated Rear Window*
OFF
INT
LO
HI
Pull lever.
See "Windshield washer" under
Windshield wiper/washer on page 53.
See Washer fluid on page 106.
Heating is operated by pressing the Ü
button.
See Heated rear window / Windshield
wiper de-icer on page 21.
12 Initial Drive Information
Demisting And Defrosting The
Windows
TRANSMISSION
GETTING STARTED
Manual Transmission
Check Before Starting Off
n
n
n
n
n
See "Demisting windshield" under Air
conditioning system on page 80.
Reverse: With the vehicle stationary,
depress the clutch pedal and engage the
gear.
If the gear does not engage, set the lever
to neutral, release the clutch pedal and
depress again; then repeat gear
selection.
See Manual transmission on page 90.
Tire pressure and condition.
Engine oil level and fluid levels.
All windows, mirrors, exterior
lighting and number plates are free
from dirt, snow and ice and are
operational.
Proper position of seats, seat belts
and mirrors.
Check brake function at low speed,
particularly if the brakes are wet.
Initial Drive Information 13
PARKING
Starting Engine With The Ignition
Switch
n
n
n
Turn key to position 1, move the
steering wheel slightly to release the
steering wheel lock.
n Manual transmission: Operate
clutch.
n Do not press accelerator pedal.
n Turn key to position 3 depressing
the clutch pedal and foot brake then
release when engine is running.
Before restarting or to switch off the
engine, turn key back to 1 or 0.
n
n
n
Do not park the vehicle on an easily
flammable surface. The high
temperature of the exhaust system
could ignite the surface.
Always apply parking brake without pressing release button. Apply
as firmly as possible on downhill or
uphill slopes. Depress the footbrake
at the same time to reduce operating
force.
Switch off the engine and ignition.
Turn the steering wheel until the
steering wheel lock engages.
If the vehicle is on a level surface or
uphill slope, engage first gear
before switching off the ignition.
On an uphill slope, turn the front
wheels away from the kerb. If the
vehicle is on a downhill slope,
engage reverse gear before switching off the ignition. Turn the front
wheels towards the kerb.
Close windows.
After running at high engine speeds
or with high engine loads, operate
the diesel engine briefly at a low
load or run in neutral for about one
to two minutes at idle speed before
switching off in order to protect the
turbocharger.
n Lock the vehicle.
See Keys on page 15.
n
Note
The engine cooling fan may
continue to run after the engine is
shut down.
14 Initial Drive Information
Keys, Doors and Windows 15
KEYS, DOORS AND
WINDOWS
KEYS, LOCKS
Keys, locks ..................................... 15
Doors .............................................. 17
Exterior mirrors .............................. 18
Interior mirror ................................ 19
Windows ........................................ 20
Sun visors ....................................... 22
Assist handles ................................. 22
Replacement keys
The key number is specified on a
detachable tag.
The key number must be quoted when
ordering replacement keys.
Two keys are provided with your new
vehicle.
Keep one of the two keys as a spare.
See "Locks" under Exterior care on
page 130.
Keys
Warning
Do not leave the key in the vehicle.
• Lock the vehicle.
• Take the key with you.
Note
In case of loss, replacement keys are
available with your CHEVROLET
retailer.
Warning
Leaving children in a vehicle with
the ignition key is dangerous for
many reasons. Children or others
could be badly injured or even killed.
They could operate the power
windows or other controls or even
make the vehicle move.
The windows will function with the
key in the ignition and children could
be seriously injured or killed if
caught in the path of a closing
window. Do not leave the keys in a
vehicle with children.
Central Locking System*
You can activate the central door
locking system from the driver's door.
This system allows you to lock and
unlock all the doors from the driver's
door, using either the key or the door
lock knob (from inside).
If the driver's door is not closed
properly, the central locking system
will not work.
16 Keys, Doors and Windows
Safety Locks
Fault in central locking system
To operate the child security door lock,
move the lever up to the lock position.
To open a rear door when the child
security door lock is activated, unlock
the door from inside and open the door
from outside.
To cancel the child security door lock,
move the lever down to the unlock
position.
Unlocking
Both the front doors can be manually
unlocked by turning the key in the lock.
The other doors can be opened by using
the interior handle.
Locking
Push inside locking knob of all doors
except driver's door. Then close the
driver's door and lock it from the
outside with the key.
Warning
Do not lock the vehicle if anyone is
to be left inside the vehicle.
Never leave children or pets
unattended in your vehicle. The
temperature inside the vehicle can
increase more rapidly and reach
much higher levels than the
temperature outside.
This can result in serious injury or
death.
Caution
Do not pull the inside door handle
while the child security door lock is
set to LOCK position. Doing so can
damage the inside door handle.
Warning
Use the child security door locks
whenever children are occupying the
rear seats.
Note
Each rear door has its individual
lock. The child safety locks for the
rear doors must be individually,
manually activated.
Keys, Doors and Windows 17
DOORS
Tailgate Opening
Caution
Before opening the tailgate check
overhead obstructions, such as a
garage door, to avoid damage of the
tailgate. Always check the moving
area above and behind the tailgate.
To open the tailgate, insert the key into
the key slot and turn it clockwise.
Lift the tailgate.
You can also open the tailgate by
pulling up the tailgate release lever
located near the driver's seat.
Warning
Do not drive with the tailgate open or
ajar, e.g. when transporting bulky
objects, since toxic exhaust gases
could enter the vehicle.
Note
The installation of certain heavy
accessories onto the tailgate may
affect its ability to remain open.
Closing
To close tailgate, push it down so it
latches securely. It locks automatically.
Make sure your hands and any other
body parts, as well as those of other
persons are completely away from the
tailgate closure area.
18 Keys, Doors and Windows
EXTERIOR MIRRORS
Convex Mirrors
Manual Mirrors
Folding Mirrors
Adjust the outside rearview mirrors so
you can see each side of your vehicle, as
well as each side of the road behind you.
Simply move the adjusting lever in the
desired direction to adjust the mirror
angles.
For pedestrian safety, the exterior
mirrors will swing out of their normal
mounting position if they are struck
with sufficient force. Reposition the
mirror by applying slight pressure to the
mirror housing.
The convex exterior mirror reduces
blind spots. The shape of the mirror
makes objects appear smaller, which
will affect the ability to estimate
distances.
Both outside mirrors are convex and is
labelled with a notice that reads as
follows:
OBJECTS IN MIRROR ARE
CLOSER THAN THEY APPEAR
Keys, Doors and Windows 19
INTERIOR MIRROR
Manual Rearview Mirror
Warning
Warning
Always keep your mirrors properly
adjusted, and use them while driving
to increase your visibility of objects
and other vehicles around you. Do
not drive while either outside
rearview mirror is folded back.
To adjust the inside rearview mirror,
hold the rearview mirror in the center
and move it to view the area behind the
vehicle.
To reduce dazzle, adjust the lever on the
underside of the mirror housing.
Your view through the mirror may
lose some clarity when it is adjusted
for night vision.
Take special care while using your
inside rearview mirror when it is
adjusted for night vision.
Failure to ensure a clear rear view
while driving may result in a
collision causing damage to your
vehicle or other property, and/or
personal injury.
20 Keys, Doors and Windows
WINDOWS
Manual Windows
Power Windows*
Warning
To raise or lower the windows, turn the
window regulator handle on the door
panel.
Be sure there is no object in the opening
before closing the windows.
Note
The rear windows cannot be fully
opened.
Take care when operating the power
windows. There is risk of injury,
particularly to children.
If there are children on the rear seat,
switch on the child safety system for
the power windows.
Keep a close watch on the windows
when closing them.
Ensure that nothing becomes trapped
in them as they move.
Warning
Do not operate the power window
switch with no purpose.
Power windows can be operated with
ignition on.
Operate the switch for the respective
window by pushing to open or pulling
to close.
Operation
You may operate the power windows
when the ignition switch is ON by using
the power window switches on each
door panel.
To raise the window, lift up the switch.
Keys, Doors and Windows 21
Child Safety System For Rear
Windows*
Heated Rear Window* /
Windshield Wiper De-icer*
The power window lockout button
can lock out the rear window
switches. The rear windows can only be
operated by the front switches after this
button is locked.
Operated by pressing the button.
Heating works with the ignition ON/
engine running and is switched off
automatically after a few minutes or by
pressing the button again.
To lower the window, press down the
switch.
Release the switch when the window
reaches the desired position.
Note
The rear windows cannot be fully
opened.
Warning
Body parts outside vehicle can be
struck by passing objects. Please
keep all parts of the body inside
vehicle.
Children can operate and become
entrapped in power windows.
Do not leave your keys or unattended
children in your car.
Serious injury or death can occur
from misuse of power windows.
Caution
Children could operate the power
windows and become trapped by the
windows, resulting in serious
injuries.
Use the power window lockout
button when children are traveling
in the rear seats.
22 Keys, Doors and Windows
Caution
Do not use sharp instruments or
abrasive window cleaners on your
vehicle's rear window.
Do not scratch or damage the
defroster wires when you clean or
work around the rear window.
SUN VISORS
ASSIST HANDLES
The sun visors can be folded down or
swivelled to the side to prevent dazzling.
If the sun visors have integral mirrors,
the mirror covers* should be closed
when driving.
Your vehicle has assist handles above
the front seat passenger door & the rear
doors. The handle above the rear doors
include a coat hook.
Passengers can use the grips for
assistance in entering / exiting the
vehicle, or for hand-holds during the
vehicle in motion.
Warning
Do not place the sun visor in such a
manner that it obscures visibility of
the roadway, traffic or other objects.
Caution
Hanging items on the assist handles
can obstruct the driver's view. Do not
hang anything on the assist handle
unless the handle is equipped with a
coat hook.
Obstructing the driver's view can
lead to an accident resulting in
personal injuries and damage to your
vehicle or other property.
Seats and Restraints 23
SEATS AND
RESTRAINTS
ALWAYS WEAR YOUR
SAFETY BELTS
Always wear your safety belts ....... 23
Front seat occupants ....................... 28
Rear seat occupants ........................ 28
Three-point safety belts .................. 28
Center rear lap belt ......................... 30
Pregnant women and safety belts ... 31
Head restraints ............................... 31
Front seats ...................................... 32
Safety belts ..................................... 35
Air bag system* ............................. 35
Child restraints* ..............................44
Occupant protection has been the focus
of much private and public research and
development for many years. The seat
belts are incorporated into the vehicle
solely for the protection of the
occupants. The safety belts can protect
you and your passengers only if they are
used.
The safety belt information included
here is intended for vehicle occupants
of adult size and for older children who
have outgrown booster seats.
Be sure that if children are too small to
be well restrained by the safety belt
system, that they are secured in an
appropriate child restraint.
Why Wear Safety Belts?
Safety belts are helpful for several
distinct reasons:
1) Safety belts attach the occupants to
the vehicle so that they will not be
ejected during an accident.
2) Safety belts attach the occupants to
the vehicle so that they can use the
space between their pre-crash
seating position and the front of the
vehicle to slow down to a stop more
gradually, as their safety belts
stretch and the front end of the
vehicle absorbs the energy of the
crash by crumpling.
3) Safety belts keep the driver in his
seat, so that the driver might have a
chance to regain control in certain
accident situations.
4) Safety belts keep occupants from
being catapulted into and injuring
the driver and other occupants.
24 Seats and Restraints
How Safety Belts Work?
Warning
• Safety belts have been shown to
be the single most effective
protection against injury or death
in an accident!
• As the owner and driver of your
vehicle, you must make certain
that each occupant is properly
wearing the safety belt provided at
the seating position.
• Pregnant women, injured, and
physically impaired persons
should also wear safety belts. Like
all other occupants, they are more
likely to suffer serious injury or
death, if they do not do so.
• The best way to protect the foetus
is to protect the mother.
Warning
• Why safety belts work, how to
wear them, and how to adjust your
seat position properly, is explained
in this section. Read all of the
information provided and always
observe these instructions and
warnings in order to gain the full
benefit of these safety systems.
Safety belts cannot work unless they are
worn and worn properly.
Vehicle occupants are injured if the
forces applied to the body’s structures
are greater than the body can tolerate
without being injured. If a person’s
body is stopped abruptly, the forces
applied to the body will be high,
whereas if the body is slowed down
gradually over some distance, the
forces will be much lower. Thus, in
order to protect an occupant from injury
in a crash, the idea is to give the person
as much time and distance as possible in
coming to a stop.
Imagine a person running at 15 miles
per hour (25 km/h) head first into a
concrete wall. Imagine a second person
running at 15 miles per hour (25 km/h)
into a wall covered by a 3-feet (90 cm)
thick deformable cushion. In the first
instance the person could be seriously
injured or even killed. In the second, the
runner could expect to walk away
Seats and Restraints 25
uninjured. Why? In the first instance,
the body hit the non-yielding concrete
surface and stopped immediately. All of
the energy the sprinter built up was
absorbed by the structures of the body,
not by the non-yielding concrete
surface. In the second example, the
body had exactly the same amount of
energy that had to be absorbed as in the
first example, but it continued to move
into the padding, giving the body
additional time and distance to slow
down to a complete stop as the padding
absorbed the sprinter’s energy by
deforming.
If a car crashes into a concrete wall at 30
miles per hour (50 km/h), the front
bumper of the car stops immediately,
but the passenger compartment stops
more gradually as the front structure of
the vehicle crumples. The belted
occupant is held to the seat and gains
the advantage of the cushion provided
by the crumpling of the front of the
vehicle and the stretching of the safety
belt webbing. That belted occupant’s
body slows down from 30 mph
(50 km/h) to zero over a distance of 90120 cm (3-4 feet). That belted occupant
also remains properly positioned so
that, if the air bag (if provided) deploys
in a frontal collision, the occupant
might never strike any rigid structures
in the vehicle. The unbelted occupant
receives no such benefit. The unbelted
person is not attached to the vehicle and
so that person continues to travel at the
vehicle’s pre-crash speed of 30 miles
per hour (50 km/h) until striking a hard
object at approximately 30 miles per
hour (50 km/h) and stopping abruptly.
Even in a frontal collision in which the
air bag (if provided) deploys, the
unbelted front seat occupant remains at
greater risk of serious injury or death
than the properly restrained front seat
occupant.
Warning
SAFETY BELTS PROTECT
Accident statistics show that drivers
and passengers properly wearing
safety belts have a lower risk of
being injured and a higher chance of
surviving an accident. For this
reason, wearing a safety belt is
legally required in most countries.
WEARING THE SAFETY BELT
Each front seat and each outboard
rear seat of your CHEVROLET
vehicle is equipped with a threepoint safety belt system that is
anchored at three locations. All front
and rear seat belts are stored and
locked by a retractor mechanism.
When set in its normal emergency
locking mode, the three-point safety
belt requires no length adjustment
and allows freedom of movement
when the vehicle moves at constant
speeds.
(Continued)
26 Seats and Restraints
Warning
However in a sudden or strong stop,
or during heavy acceleration or
deceleration, the safety belt will lock
automatically to restrain the body.
In order to gain the full benefit of a
safety belt, you must wear it correctly
and position yourself correctly
within your seat, as follows:
• Seatback upright (not reclined, to
prevent you from “submarining”
or slipping out from under the
safety belt, and injuring vulnerable
body parts in a crash).
• Occupant sitting upright (not
slouched, to properly position the
lap and shoulder portions of the
safety belt for maximum restraint
and minimum injury to soft and
vulnerable parts of your body in a
crash).
(Continued)
Warning
• Safety belt latch plate and buckle
securely fastened with a “click” (if
the safety belt is not securely
latched, it cannot provide any
protection; pull on the belt to
make sure it is secure).
• Lap portion of safety belt snug and
low on hips and bony pelvis (not
abdomen where the restraining
belt could cause serious injury in a
crash – THIS IS PARTICULARLY
IMPORTANT FOR PREGNANT
WOMEN).
Warning
• Only one occupant per one safety
belt (do not allow more than one
person in a safety belt; multiple
people in a single safety belt can
exceed the capacity of the safety
belts and people sharing a safety
belt can cause crushing and other
injuries to each other in a crash).
• Children in secure child seats (in a
crash the forces are too great for an
adult to hold onto a child and the
adult will crush the child if they
share the same safety belt).
• Shoulder portion of the safety belts
over your outside shoulder and
snug against the chest (not under
an arm, around your neck, over an
inside shoulder or behind your
back, and not loose with slack
allowing excessive forward movement and injury in a crash).
• No unbelted occupants (occupants not wearing a safety belt are
an injury threat to themselves and
to other occupants in the vehicle
because in a crash they become a
free-flying body that will strike
other persons in their path).
(Continued)
(Continued)
Seats and Restraints 27
Warning
• No twisted safety belts (twisted
safety belts will not move freely
and restrain properly and can cut
into the occupants rather than
spread the force, thus increasing
the risk of injury and death).
• Lock doors (unlocked doors
increase the risk of injury and
death from external impacts and
ejection in a crash).
Warning
• Make periodic checks (while
riding in the vehicle, check from
time to time to be sure that the lap
portion of the belt is snugly across
the hips and has not ridden up
around the waist and that the
shoulder portion is midway over
the shoulder and across the chest;
properly positioned belts allow
the stronger structures of the hips
and shoulders to absorb the forces
of the belt against the body, while
improperly positioned belts may
cause neck injury or injury to the
vulnerable organs in the abdominal area).
• No hard or breakable objects,
between safety belts and body
parts (objects such as pens,
glasses, etc. in the occupant’s
pocket or on the cloth can cause
injury in the event of a collision).
(Continued)
Warning
• Improper use of a safety belt can
cause serious injury. Do not
modify the safety belt. Do not add
any device which would affect the
operation of the safety belt.
• Before you close the door, make
sure the safety belt is out of the
way. Otherwise, the belt and/or the
vehicle body could be damaged.
Warning
If the safety belt goes over an armrest
(if so equipped), lap portion of the
safety belt could force the occupant’s
abdomen, not the bony pelvis, in a
collision.
• Be sure that the safety belt goes
under the armrest.
Failure to follow this can result in
injuries or even death in case of a
collision.
28 Seats and Restraints
FRONT SEAT OCCUPANTS
Each front seat is equipped with
adjustable seat and seatback with
height-adjustable head restraint and
three point lap-and-shoulder safety
belts.
REAR SEAT OCCUPANTS
The rear seat is equipped with two
outboard seating positions featuring
three-point lap-and-shoulder safety
belts and a center seat equipped with a
lap safety belt.
THREE-POINT SAFETY
BELTS
To help reduce the risk of personal
injury in collisions or sudden manoeuvres, your CHEVROLET vehicle is
equipped with three-point safety belts.
The two front seats and the two
outboard rear seating positions are each
equipped with three-point safety belts.
These safety belts are each anchored in
three locations to restrain passengers
who are properly positioned and
wearing the safety belt.
A three-point safety belt set in the ELR /
WLR (Emergency Locking Retractor /
Webbing Locking Retractor) mode
requires no length adjustment and
allows the freedom of body movement
when the vehicle moves at a constant
speed.
However, in the event of a sudden or
strong stop, or during heavy acceleration or deceleration, the safety belt
will lock automatically to restrain the
body.
Always fasten your safety belts
correctly:
1. Close and lock the doors.
2. Make sure seatback is upright.
3. Pick up the safety belt latch plate
and use it to pull the belt across your
body. Make sure the belt is not
twisted. If the safety belt locks as
you are pulling it out, allow it to
rewind into the retractor. Pull the
safety belt out again to a comfortable and secure length.
Seats and Restraints 29
4. Position the shoulder belt midway
over the shoulder and across the
chest. Never place the shoulder belt
across the neck. This assures that in
the case of a collision, the belt
applies force to the shoulder bones
and keeps the impact away from
ribs or neck, helping to avoid
serious internal injuries.
5. Wear the lap belt low and snug on
the hips, not the waist. This assures
that in the case of a collision, the
belt applies force to the pelvic
bones and not the abdomen, helping
to avoid serious injuries.
6. Push the latch plate firmly into the
buckle until the mechanism clicks.
Make sure you are using the proper
buckle. Be sure to position the
release button on the buckle so you
can unbuckle the safety belt quickly
if necessary.
7. Pull up on the latch plate to make
sure it is secure.
To remove the safety belt, press the
release button on the buckle. The
belt will retract automatically.
Guide the safety belt as it retracts to
prevent the latch plate from
damaging interior surfaces or
injuring occupants.
Maintain your safety belts:
1. Periodically inspect all safety belts,
related parts, and assemblies. Have
these replaced by your CHEVROLET
retailer if any safety belts, assemblies
or related parts are damaged.
2. You must replace any safety belt or
related part that has been stretched
or damaged in an accident, even if
the stretching or damage is not
obvious or visible. Stretched belts
and damaged parts do not perform
effectively. Replacement of safety
belts must be with new belts only.
3. Chevrolet recommends replacing
the entire safety belt assembly after
your vehicle has been in a collision.
If your CHEVROLET retailer finds
that no safety belt damage has
occurred and that everything is in
proper working order, you need not
make any replacement.
4. It is dangerous to operate your
vehicle with damaged safety belts
or other parts.
30 Seats and Restraints
CENTER REAR LAP BELT
Safety Belt Care
Keep belts clean and dry.
Warning
Do not bleach or dye safety belts. It
may severly weaken them. In a
crash, they might not be able to
provide adequate protection. Clean
safety belts only with mild soap and
lukewarm water.
To fasten the center rear lap belt:
1. Hold the metal latch plate 90
degrees to the belt and pull belt low
across hips.
2. Insert the latch plate into the buckle.
3. Pull free end of belt away from latch
plate to tighten belt.
4. Pull on belt clip to take up slack.
To remove the lap belt, press the release
button on the buckle.
Warning
A crash can damage the safety belt
system in the vehicle. A damaged
safety belt system may not properly
protect the person using it, resulting
in serious injury or even death in a
crash. To help make sure the safety
belt systems are working properly
after a crash, have them inspected
and any necessary replacements
made as soon as possible.
Belt clip
PULL
PULL
INSERT to fasten
PRESS to unfasten
PULL to
lengthen
Seats and Restraints 31
PREGNANT WOMEN AND
SAFETY BELTS
HEAD RESTRAINTS
Position
Warning
• After a collision, inspect all safety
belts and related parts for fraying
or other damage. Ask your
CHEVROLET retailer to replace
any damaged parts.
• It is dangerous to operate your
vehicle with damaged safety belts
or other parts.
Failure to make appropriate repairs
may result in additional damage to
your vehicle or personal injuries.
Safety belts work for everyone,
including pregnant women.
Like all occupants, pregnant women are
more likely to be seriously injured if
they do not wear safety belts. In
addition, when a safety belt is worn
properly, it is more likely that the
unborn child will be safe in a crash.
To provide maximum protection, a
pregnant woman should wear a threepoint safety belt. She should wear the
lap portion of the belt as low as possible
across the pelvis to prevent pressure on
the abdomen throughout her pregnancy.
Warning
Only drive with the head restraint set
to the proper position.
Removed or improperly adjusted
head restraints can result in serious
head and neck injuries in case of a
collision.
Make sure that the head restraints are
properly adjusted before driving.
32 Seats and Restraints
FRONT SEATS
Head Restraints On Front Seats
Seat Position
Height adjustment
Warning
Only drive with the seat correctly
adjusted.
The middle of the head restraint should
be at eye level. If this is not possible for
extremely tall persons, set to highest
position, and set to lowest position for
short people.
Pull the head restraint upwards.
To move down press the release button
and push the head restraint downwards.
Removing
Press the release button and pull up the
head restraint.
n
Sit with your buttocks as far back
against the backrest as possible.
Adjust the distance between the
seat and the pedals so that your legs
are slightly angled when tromping
the pedals. Slide the passenger seat
as far back as possible.
Seats and Restraints 33
Seat Adjustment
Sit with your shoulders as far back
against the backrest as possible. Set
the backrest angle so that you can
easily reach the steering wheel with
your arms slightly bent. Maintain
contact between your shoulders and
the backrest when turning the
steering wheel. Do not tilt the
backrest too far back. We recommend a maximum angle of approx.
25°.
n Adjust the steering wheel. See
Steering wheel adjustment on page
51.
n Set the seat at the desired position to
have a clear field of vision on all
sides and on all display instruments.
There should be at least one hand of
clearance between your head and
the headlining. Your thighs should
rest lightly on the seat without
pressing into it.
n Adjust the head restraint. See Head
restraints on page 31.
n
Seat backrest
Danger
Do not sit nearer than 25 cm from the
steering wheel, to permit safe airbag
deployment.
Warning
Never adjust driver’s seat while
driving. Driver could lose control of
the vehicle and it results in injury or
property damage.
Seat positioning
Pull lever, adjust inclination and release
lever. Allow the seat to engage audibly.
After the adjustment, lean back against
the backrest to make sure that the
seatback has been locked in an
appropriate position.
Do not lean on seat backrest when
adjusting.
Pull handle, slide seat, release handle.
34 Seats and Restraints
Seat Height Adjustment *
(Driver’s Seat)
Warning
You can lose control of the vehicle if
you try to adjust a driver seat while
the vehicle is moving.
Adjust the driver seat only when the
vehicle is not moving.
Warning
If either seatback is not locked, it
could move forward in a sudden stop
or crash. That could cause injury to
the person sitting there. Always push
and pull on the seatbacks to be sure
they are locked.
Warning
Things you put on this seatback can
strike and injure people in a sudden
stop or turn, or in a crash. Remove or
secure all items before driving.
Warning
Sitting in a reclined position when
the vehicle is in motion can be
dangerous. Even when buckled up,
the safety belts cannot do their job.
The shoulder belt will not be against
your body. Instead, it will be in front
of you. In a crash, you could go into
it, receiving neck or other injuries.
The lap belt could go up over your
abdomen. The belt forces would be
there, not at your pelvic bones. This
could cause serious internal injuries.
For proper protection when the
vehicle is in motion, have the
seatback upright. Then sit well back
in the seat and wear the safety belt
properly.
To adjust the height of the entire seat
cushion, rotate the knob.
Rotate the knob clock-wise to move up
and anti-clock wise to move down.
Seats and Restraints 35
SAFETY BELTS
The belts are locked during heavy
acceleration or deceleration of the
vehicle for the safety of the occupants.
Warning
Fasten safety belt before each trip.
In the event of an accident, people not
wearing safety belts endanger their
fellow occupants and themselves.
AIR BAG SYSTEM*
Safety belts are only designed for use
by one person at a time. They are not
suitable for people younger than 12
years of age or smaller than 150 cm(5
ft).
Periodically check all parts of the belt
system for damage and proper
functionality.
Have damaged components replaced.
After an accident, have the belts
replaced by CHEVROLET retailer.
Note
Make sure that the belts are not
damaged by shoes or sharp-edged
objects. Prevent dirt from getting
into the belt retractors.
Safety belt reminder . See Safety belt
reminder on page 59.
Your vehicle is equipped with an air bag
Supplemental Restraint System (SRS)
designed to protect properly seated and
restrained front seat occupants. Both
the driver and front passenger seating
positions are equipped with driver and
passenger air bags, in addition to threepoint safety belts and other safety
features. Each air bag is specially
packed in a module, from which the air
bag is designed to inflate and deploy at
extremely high speed and force in the
event your vehicle is involved in certain
types of collisions which pose a high
risk of serious injury or death to the
driver and passengers.
36 Seats and Restraints
Warning
If handled improperly the airbag
systems can be triggered in an
explosive manner.
The driver should sit back as far as
possible while still maintaining
control of the vehicle. If you are
sitting too close to the airbag, it can
cause death or serious injury when it
inflates.
For maximum safety protection in all
types of crashes, all occupants
including the driver should always
wear their safety belts to minimize
the risk of severe injury or death in
the event of a crash. Do not sit or lean
unnecessarily close to the airbag
while the vehicle is in motion.
The air bag may cause facial or body
scratch, injury by broken glasses or
getting a burn by explosion while air
bag is deployed.
Warning
The airbag system control electronics
are located in the center console area.
Do not put any magnetic objects in
this area.
Do not stick anything on the airbag
covers and do not cover them with
other materials.
Each airbag is triggered only once.
Have deployed airbags replaced by
CHEVROLET retailer.
Do not make any modifications to the
airbag system as this will invalidate
the vehicle type approval.
In the event of airbag deployment
have the steering wheel, the
instrument panel, all paneling parts,
the door seals, the handles and the
seats removed by CHEVROLET
retailer.
When an air bag deploys, there may
be a loud noise and smoke. These
conditions are normal and are not
dangerous but in case it may irritate
skin of the passenger. If the irritation
is continued, contact a doctor.
Danger
Never allow children or infants and
pregnant women and the old and the
weak sit in the front passenger seats
fitted with airbags.
Furthermore, do not drive with a baby
seat fitted thereon. In case of an
accident, the impact from the inflated
airbag can cause facial injury or
death.
Caution
If the vehicle is impacted by bumps
or objects on unpaved roads or
sidewalks, the air bag may inflate.
Drive slowly on the surfaces not
designed for vehicle traffic to prevent
unintended air bag deployment.
Control indicator for airbag systems.
See Airbag warning light on page 59.
Seats and Restraints 37
Front Airbag System
The front airbag system consists of one
airbag in the steering wheel and one in
the instrument panel on the front
passenger side. These can be identified
by the word AIRBAG.
The front airbag system is triggered in
the event of an accident of a certain
severity in the depicted area. The
ignition must be on.
The forward movement of the front seat
occupants is retarded, thereby considerably reducing the risk of injury to the
upper body and head.
Warning
Air bags are only a supplemental
restraint, and are most effective in
combination with safety belts.
All occupants, including the driver,
should always wear their safety belts,
whether or not an air bag is also
provided at their seating position, to
minimize the risk of severe injury or
death in the event of a crash.
• Air bags do not deploy in side or
rear collisions. Occupants not
wearing their safety belts will not
be protected by any restraint
system, resulting in severe injuries
or death in these types of
collisions.
• Occupants who are not properly
wearing their safety belts may be
thrown forward by braking before
impact, placing their bodies near
or against the air bag modules.
This can cause severe injury from
the force of an air bag’s deployment.
How Air Bags Work?
Air bags are designed to keep your
head, neck, and chest from slamming
into the instrument panel, steering
wheel or windshield in a front-end
crash. They are not designed to inflate
in rear-end or rollover crashes or in
most side-impact crashes. Your air bags
are designed to deploy in crashes that
are equivalent to, or exceed the force of
a vehicle traveling at a speed of 15 to 23
km/h (9.3 ~ 14.3 mph) crashing into a
solid immovable wall.
The air bag system activates during a
severe collision which is either frontal
or when the impact angle is up to 30°
from straight ahead.
38 Seats and Restraints
This crash severity level at which the air
bag will deploy was selected to assure
inflation of air bags in our vehicles at or
below the crash severity at which a
statistical risk of death begins for
frontal collisions.
In the real world, cars rarely crash
squarely into immovable walls; air bags
most often deploy when a vehicle
collides with another vehicle. The
actual speed at which the air bags will
inflate may be higher in the real world,
because real-world accidents usually
involve more complicated multivehicle impacts, angled impacts, and
incomplete frontal impacts (e.g.
sideswipes), and because the object
struck is usually not immovable.
Note
An air bag can also inflate in
moderate to severe non-collision
situations (e.g., slamming the
undercarriage or other solid
component of the vehicle in a dip in
the driving surface) where the crash
sensors generate a signal equivalent
to a crash into a solid immovable
barrier at 15 to 23 km/h (9.3 ~ 14.3
mph).
Air bags inflate when a sensor detects a
front-end crash of a severity sufficient
for air bag deployment. The crash
sensor sends an electric signal to initiate
the air bag’s inflation. A propellant is
ignited which rapidly burns inside the
air bag module, producing enough
nitrogen gas to fully inflate the air bag.
The chemical process and nitrogen gas
are harmless to the vehicle’s occupants.
Within 0.045 seconds of the crash
detection, the pressure of the inflating
air bag splits open the plastic trim
covering on the module, which is stored
on the inside surface to allow the trim of
the steering wheel hub or passengerside instrument panel to split open
under force.
The air bag fully inflates to create a
surface that can catch the forward
movement of the front occupant’s head
and upper torso. As the occupant comes
into contact with the air bag, the gas in
the bag empties through holes at the
base of the bag to soak up the force from
the occupant’s forward movement.
Note
Air bags cannot smother you and
they don’t restrict your movement.
Air bags have vents, so they deflate
immediately after cushioning you.
The entire process, from initial contact
through the air bag’s inflation and
deflation, occurs within 0.2 seconds,
faster than the blink of an eye. Because
the collision is over in a fraction of a
second, and vehicles involved in an
accident usually come to the final point
of rest only one or two seconds after
initial contact, the supplemental
restraint system must sense the crash
and cause the air bags to deploy nearly
instantaneously to protect the vehicle’s
occupants.
Warning
The best protection can be provided
only when the seat is in a proper
position.
No obstacles are allowed within the
inflation area of airbag.
Wear the seat belt correctly so that
the air bag can provide protection.
Seats and Restraints 39
After The Air Bag Deploys
SRS Servicing
After the air bag deflates, you may
notice a burning smell, smoke, and
white powder in the interior of the
vehicle. This is normal. The burning
smell is from the propellant that was
ignited to inflate the airbag. The white
powder is cornstarch or talcum or
sodium compounds which lubricate the
air bag to reduce friction on the air bag
during storage and inflation. Although
they may cause some skin or eye
irritation, these substances are not toxic.
Your Supplemental Restraint System
(SRS) is virtually maintenance free.
However, if any of the following
occurs, have your SRS serviced
immediately by CHEVROLET retailer.
n Any of your air bags have deployed.
n The air bag warning lamp indicates
malfunction.
Warning
• Do not drive your vehicle after one
or more air bags have deployed.
• Do not try to repair, alter, or
dispose of the air bag yourself.
• Air bags are installed under high
pressure with sophisticated crash
sensing and air bag inflating
systems. Allowing an untrained
and unauthorized person to handle
an air bag can lead to serious
injuries and death.
• Contact your CHEVROLET retailer
immediately if either of your
vehicle’s air bag has deployed, if
damage occurs to your vehicle at or
near either of the air bag modules, or
if you believe for any reason that the
operating condition of either air bag
has been impaired.
Driving a vehicle after an air bag has
deployed without authorized service
can result in severe injuries and
death.
40 Seats and Restraints
How Air Bags Protect Front
Occupants?
Vehicle occupants are usually injured in
a collision because their bodies are
thrown into a stationary object, either
inside the vehicle, such as the steering
wheel, instrument panel or windshield,
or outside the vehicle, such as the
driving surface or a tree, when the
occupant is thrown from the vehicle.
Severe injuries also occur by occupants
being jolted by the forces of the crash,
even without body contact with a
stationary object or surface.
All of these injuries are caused by the
force created by the collision as the
vehicle is brought to a sudden stop. The
time and distance which a vehicle is
allowed in slowing or stopping in great
part determines the severity of a
collision’s effect on vehicle occupants.
For example, when a vehicle brakes to a
stop at a red light, the occupant’s bodies
are forced forward. This is because both
the vehicle and its occupants are
initially traveling at the same speed.
The brakes slow the vehicle, and the
occupants continue to move forward
somewhat inside the vehicle. However,
properly positioned and restrained
occupants are rarely injured when a
vehicle comes to a stop by even sudden
and hard braking. This is because even
hard braking allows a comparatively
long time and distance for the vehicle to
stop. The safety belts and the
occupants’ strength are generally
sufficient to safely counteract the force
of a braking stop.
In a crash, a vehicle may go from
highway speed to a full stop in a
fraction of a second and in a distance of
less than one foot. This extremely short
stopping time and distance greatly
increases the force placed upon the
occupants. No person has the strength
or reflexes to counteract this force.
Even occupants properly positioned
and wearing their safety belts will find
their head, upper torso, arms, and hips
thrown forward at the speed the vehicle
was traveling before impact. In
moderate to severe frontal collisions,
even occupants wearing safety belts
can sustain internal brain and organ
injuries without the occupant’s head or
torso hitting any stationary objects or
surfaces.
Air bags provide additional stopping
time and distance for the head and
upper torsos of front occupants in
moderate to severe frontal or nearfrontal collisions. This additional time
and distance can save lives and prevent
serious injuries.
Seats and Restraints 41
Help Your Air Bags To Protect
You
Besides their life saving benefits, the air
bag system also poses some moderate
risks.
Because an air bag inflates with
considerable force, speed and suddenness, the air bag supplemental restraint
system will be safer and more effective
if the occupants are properly positioned
and wear safety belts in the vehicle.
Warning
Essential Air Bag Safety Rules:
• Never place a rear-facing child
seat in the front seat.
• Children age 12 years and under
should ride in the back seat
whenever possible.
• Always wear your safety belts,
even if your vehicle is not
equipped with an air bag.
• Move your seatback rearward as
far as is comfortable and safe, tilt
the seatback slightly and sit
against the back of the seat.
• Do not place objects on, over or
near the air bag modules. They can
become projectiles during inflation, causing severe injury.
• Do not lean forward or rest any
part of your body on the trim
covering the air bag modules.
• Do not drive with the steering
column tilt adjusted fully upward.
Severe injury and death can result
from failing to observe these air bag
safety rules.
Always secure any rear-facing child
seat in the back seat.
Child restraint systems in which the
child faces the rear of the seat must
never be placed in the front seat. The
deployment of an air bag risks severe
injury or death to a child in a rear-facing
child seat placed in the front seat.
Children should be seated in the back
seat.
According to accident statistics,
children age 12 years and under are
safer when properly restrained in the
back seat than in the front seat, and
should ride in the back seat whenever
possible. Children are safer in the back
seat only because of the risks of injury
by air bags. Studies have shown that
children are also safer in the back seat
than in a front seat without an air bag.
42 Seats and Restraints
Proper positioning of adults and
teenagers.
Adults and teenagers seated in the front
driver and passenger seats can also
improve their safety and the effectiveness of the air bags by using proper
seating positions.
For the best seating position of adults
and teenagers:
n Wear the three-point safety belts at
all times.
All occupants, including the driver,
should always wear their safety
belts whether or not an air bag is
also provided at their seating
position to minimize the risk of
severe injury or death in the event of
a crash.
Air bags do not deploy in rear and
side-impact collisions. Occupants
not wearing their safety belts will
not be protected by any restraint
system, resulting in severe injuries
or death in these types of collisions.
Occupants who are not properly
wearing their safety belts may be
thrown forward by braking before
impact, placing their bodies near or
against the air bag modules. This
can cause severe injury from the
force of air bag’s deployment.
n Move the back of the seat rearward
as far back as is comfortable and
safe.
Positioning your seat farther away
from the air bag module will not
decrease the effectiveness of the air
bag. Greater distance from the
module means greater protection
from the air bag’s forceful and
sudden deployment. Never move
the driver’s seatback so far as to
impair the driver’s ability to
comfortably reach the steering
wheel, pedals and other instrument
and controls.
n Tilt the seat back slightly and do not
lean forward.
Tilt the seatback slightly, and sit
with your back against the back of
the seat. Do not lean or otherwise
position your body close - within 15
cm (6 inch) - to the air bag module.
Do not rest any part of your body on
or near the plastic trim covering the
air bag module (the hub of the
steering wheel or the passenger side
of the instrument panel above the
glove box). Try to keep your head
and body more than 25 to 30 cm (10
to 12 inches) away from the air bag.
More distance is safer.
Seats and Restraints 43
Warning
To perform well, an air bag must
deploy quickly. The force is greatest
in the first 5-8 cm (2-3 inches) after
the air bag bursts through its cover
and begins to inflate. Those 2 to 3
inches immediately after the air bag
bursts through its module cover and
begins to inflate are the risk zone.
• If an occupant’s body is in this risk
zone when the air bag deploys,
severe injury or even death could
result.
• The force decreases as the air bag
inflates farther from the module
cover.
• Greater distance from the air bag
module means greater safety
when the air bag deploys.
Do not place objects, children or
pets between you and the air bag
module.
Your vehicle’s air bag modules are
located on the steering wheel and on
the instrument panel above the
glove box. Placing objects on, over
or near the plastic trim covering
these air bag modules could cause
those objects to be propelled by the
inflating air bag into your face and
torso causing serious injury.
Children and pets should never ride
on another occupant’s lap. Do not
place objects which could cause
injury during deployment on an
occupant’s lap.
n Tilt the steering wheel downward
(if so equipped), pointing the air bag
towards your chest instead of your
head and neck.
Never position the steering wheel at
the highest position. This position
should only be used to allow easy
entry and exit from the driver’s seat.
Lower the steering before starting
n
to drive. This will aim the air bag at
the driver’s chest, rather than the
more easily injured head and neck.
Note
The fact that your vehicle may be
severely damaged and the air bags
did not inflate or the fact that the
vehicle is relatively undamaged and
the air bag did inflate does not
necessarily mean that there is
something wrong with your air bag
system. The crash sensors detect the
severity of the crash, not the amount
of damage to the vehicle.
44 Seats and Restraints
CHILD RESTRAINTS*
Child Restraint Systems
Selecting The Right System
When a child restraint system is being
used, pay attention to the following
usage and installation instructions
supplied with the child restraint system.
Always comply with local or national
regulations. In some countries, the use
of child restraint systems is forbidden
on certain seats.
Children should travel facing rearwards
in the vehicle as long as possible. This
makes sure that the child's backbone,
which is still very weak, is under less
strain in the event of an accident.
Children under 12 years or under 150
cm tall should only travel in an appropriate child safety seat.
Never carry a child whilst traveling in
the vehicle. The child will become too
heavy to hold in the event of a collision.
When transporting children, use the
child restraint systems suitable for the
child's weight.
Ensure that the child restraint system to
be installed is compatible with the
vehicle type.
Warning
NEVER use a rearward facing child
restraint on a seat protected by an
ACTIVE AIRBAG in front of it,
DEATH or SERIOUS INJURY to the
CHILD can occur.
Warning
If the vehicle is equipped with a lap
belt on the rear center seat, no child
restraint system is allowed on this seat.
It is advised to mount the child
restraint system only on one of the rear
outer seats.
Ensure that the mounting location of
the child restraint system within the
vehicle is correct.
Allow children to enter and exit the
vehicle only on the side facing away
from the traffic.
When the child restraint system is not in
use, secure the seat with a seat belt or
remove it from the vehicle.
Note
Do not stick anything on the child
restraint systems and do not cover
them with any other materials.
A child restraint system which has
been subjected to stress in an
accident must be replaced.
Please ensure that infants and
children are seated in the rear seats
using child restraints.
Until the children can use seat belts,
please select a child restraint
suitable for its age and make sure
the child wears it. Please see the
instructions on the relevant
products for child restraints.
Storage 45
STORAGE
STORAGE COMPARTMENTS
Instrument Panel Storage
Storage compartments .................... 45
Luggage / load locations ................ 47
Additional storage features* .......... 49
Information on loading the vehicle ..49
Coin Box
Storage on top of the instrument
panel
The storage is used for small articles, etc.
Warning
Do not store heavy or sharp objects
in the storage compartments.
Otherwise, vehicle occupants could
be injured by objects being thrown
around in the event of hard braking, a
sudden change in direction or an
accident.
Store your coins in a place.
46 Storage
Cupholder
Glovebox
Warning
Do not place uncovered cups of hot
liquid in the cup holder while the
vehicle is in motion. If the hot liquid
spills, you burn yourself. Such a burn
to the driver could lead to loss of
control of the vehicle.
To reduce the risk of personal injury
in the event of sudden stop or
collision, do not place uncovered or
unsecured bottles, glasses, cans, etc.,
in the cup holder while the vehicle is
in motion.
To open pull the grip.
Warning
To reduce the risk of injury in an
accident or a sudden stop, always
keep the glovebox door closed while
driving.
The cup holders are located in the front
console and rear part of the center
console.
Storage 47
LUGGAGE/LOAD LOCATIONS
Luggage Compartment
Folding down rear seat backrests
Note
To ensure enough room for rear seat
cushion operation, slide the front
seat forward and adjust the front
seatback upright.
Warning
Do not stack luggage or other cargo
higher than the front seats.
Do not allow passengers to sit on the
folded seatbacks while the vehicle is
in motion.
Unrestrained luggage or passengers
on a folded seatback can be thrown
about within or ejected from the
vehicle in a sudden stop or accident.
Serious injuries or death can result.
To fold down the rear seat backs
separately:
1. Pull up under the front of the rear
seat cushion to release it.
2. Guide the released rear seat cushion
to an upright position.
3. Disengage the seat tie rods from the
body brackets and snap into the
bracket against the cushion. Ensure
that all the seat tie rods are
disengaged from the body.
4. Pull up the release knob on top of
the rear seatback and fold it forward
and down.
48 Storage
5. Adjust the front seats to the desired
position.
To return the seatback to the upright
position, lift it up and push it firmly into
place.
To return the rear seat cushion, engage
the seat tie rods in to body brackets, put
the rear part of the seat cushion in its
original position, then push the front
part of the seat cushion firmly down
until it latches.
Caution
Caution
When returning rear seatback to the
upright position, place the rear safety
belt and buckles between the rear
seatback and one cushion. Make sure
the rear safety belt and buckles are
not to be pinched under the rear seat
cushion.
Make sure the safety belts are not
twisted or caught in the seatback and
are arranged in their proper position.
Folding a rear seat with the safety
belts still fastened may cause
damage to the seat or the safety belts.
Always unbuckle the safety belts and
return them to their normal stowed
position before folding a rear seat.
Warning
Ensure that the rear seatbacks are all
the way back and locked in position
before operating the vehicle with
passengers in the back seat.
Do not pull the release knobs on the
top of the seatback while the vehicle
is moving.
It can cause injuries or damage to the
occupants.
Warning
Never allow passengers to sit on top
of the folded down seatback, while
the car is moving as this is not a
proper seating position and no seat
belts are available for use.
This could result in serious injury or
death in case of an accident or sudden
stop.
Objects carried on the folded down
seatback should not extend higher
than the top of the front seats. This
could allow cargo to slide forward
and cause injury or damage during
sudden stops.
Storage 49
ADDITIONAL STORAGE
FEATURES*
Convenience Net
INFORMATION ON
LOADING THE VEHICLE
You can carry small loads with your
optional convenience net.
To install the net, hang each loop in the
upper corner of the net to both anchors
of the back panel.
n
Caution
n
The convenience net is designed for
small loads. Do not carry heavy
objects in your convenience net.
n
n
n
n
Heavy objects in the load compartment should be placed against the
seat backrests. Ensure the backrests
are securely engaged. If objects can
be stacked, the heavier objects
should be placed at the bottom.
Secure objects in load compartment
to prevent sliding.
When transporting objects in the
load compartment, the backrests of
the rear seats must not be angled
forward.
Do not allow the load to protrude
above the upper edge of the
backrests.
Do not place any objects on the load
compartment cover or on the top of
the instrument panel.
The load must not obstruct the
operation of the pedals, parking
brake and gear selector, or hinder
the freedom of movement of the
driver. Do not place any unsecured
objects in the interior.
Do not drive with an open load
compartment.
n The payload is the difference
between the permitted gross vehicle
weight (see Identification plate on
page 139) and the kerb weight. For
the kerb weight in detail, refer to the
technical data section. The kerb
weight includes weights for the
driver (68 kg), luggage (7 kg) and
all fluids (tank 90 % full). Optional
equipment and accessories increase
the kerb weight.
n Driving with a roof load increases
the sensitivity of the vehicle to
cross-winds and has a detrimental
effect on vehicle handling due to the
vehicle’s higher center of gravity.
Distribute the load evenly and
secure it properly with retaining
straps. Adjust the tire pressure and
vehicle speed according to the load
conditions. Check and retighten the
straps frequently.
n
50 Storage
Instruments and Controls 51
INSTRUMENTS
AND CONTROLS
CONTROLS
Steering Wheel Adjustment*
Horn
Unlock lever, adjust steering wheel,
then engage lever and ensure it is fully
locked.
Do not adjust steering wheel unless
vehicle is stationary.
Press the
switch on the steering
wheel pad to sound the horn.
Controls .......................................... 51
Windshield wiper/washer ............... 52
Clock .............................................. 54
Power outlets* ................................ 54
Cigarette lighter* ........................... 54
Warning lights, gauges and
indicators......................................... 56
Telltale IP display unit .................... 62
Caution
If strong impact delivers to steering
column axle direction when the
steering wheel is adjusted or the lever
is locked, it may cause damage to the
parts related to steering wheel.
52 Instruments and Controls
Steering Wheel Audio Controls*
WINDSHIELD WIPER/
WASHER
Windshield Wiper
OFF
INT
LO
HI
OFF
INT
LO
HI
Misting function
To operate the windshield wipers once
in case of light rain or mist, lightly
move the windshield wiper/washer
lever towards the INT position and
release it.
The lever will return automatically to
its normal position when released. The
wipers will operate through one cycle.
Caution
The infotainment system can be
operated by the controls on the steering
wheel.
Further information is available in the
infotainment section.
To operate the windshield wipers, turn
the ignition ON and move the windshield wiper / washer lever downward.
OFF :
INT :
LO :
HI :
System off.
Intermittent operation.
Continuous wipe, slow speed.
Continuous wipe, fast speed.
Less than clear vision for the driver
can lead to an accident resulting in
personal injury and damage to your
vehicle or other property.
Do not operate the windshield wipers
when the windshield is dry or
obstructed, as with snow or ice. Using
the wipers on an obstructed windshield can damage the wiper blades,
wiper motor, and glass.
Check blades are not frozen to
windshield before operating in cold
weather. Wiper operation while blade
is frozen can damage wiper motor.
Instruments and Controls 53
Windshield Washer
Rear Window Wiper/Washer
Warning
OFF
INT
LO
HI
Pull lever. Washer fluid is sprayed onto
the windshield and the wiper wipes for
a few strokes.
Caution
Do not operate the windshield washer
continuously for more than some
seconds, or when the washer fluid
tank is empty. This can cause the
washer motor to overheat resulting in
costly repairs.
Do not spray washer fluid on the
windshield/tailgate window in
freezing weather.
Using washer fluid and wipers may
cause an accident in freezing weather
because washer fluid can form ice on
a frozen windshield/tailgate window
and obstruct your vision.
OFF
INT
LO
HI
To operate the tailgate wiper and
washer, push the lever towards the
instrument panel. Pushing once, wiper
will operate continuously at slow
speed. To spray the washer fluid, push
the lever once more.
Caution
Do not operate the tailgate window
washer continuously for more than
some seconds, or when the washer
fluid tank is empty. This can cause the
washer motor to overheat resulting in
costly repairs.
54 Instruments and Controls
CLOCK
POWER OUTLETS*
CIGARETTE LIGHTER*
Time is shown in the cluster.
Set time
Push the CLOCK button of the cluster
for more than 1 second. When the hour
display flashes, adjust the current hour
using the CLOCK button.
After for a second, the minute display
will flash automatically then adjust the
current minute using the CLOCK
button.
The setting will be finished without any
operation after adjusting in few
seconds.
A 12V power outlet is located in the
front console.
Do not exceed the maximum power
consumption of 120 W.
With ignition off the power outlet is
deactivated.
Additionally the power outlet is
deactivated in case of low battery
voltage.
To operate the cigar lighter, turn the
ignition switch to ACC or ON and push
the lighter in all the way.
The cigar lighter will pop out automatically when it is ready to use.
Caution
Do not connect any current delivering accessories, e.g. electrical
charging devices or batteries.
Do not damage the sockets by using
unsuitable plugs.
Instruments and Controls 55
Caution
Overheating the cigarette lighter can
damage the heating element and the
lighter itself.
Do not hold the lighter in while it is
heating. This can cause the lighter to
overheat.
Trying to operate a malfunctioning
cigarette lighter can be dangerous. If
the heated cigarette lighter does not
pop out within 25 seconds, pull it out
and consult a CHEVROLET retailer
to have it repaired. It can cause
injuries and damage to your vehicle.
Warning
If you leave the vehicle with an
inflammable explosive substance,
such as a disposable lighter, inside the
vehicle in summer, it can explode and
cause fire due to an increase of
temperature in the passenger
compartment and the boot.
Please ensure that no inflammable
explosive substances are left or kept
inside the vehicle.
Caution
The cigarette socket should only be
used with the cigarette lighter. If
other 12V power adapters are
installed into the cigarette socket,
fuse failure or a potential thermal
incident may occur.
Caution
The barrel of an operating cigarette
lighter can become very hot.
Do not touch the barrel of the
cigarette lighter and do not allow
children to operate or play with the
cigarette lighter.
This hot metal can cause personal
injuries and damage to your vehicle
or other property.
56 Instruments and Controls
WARNING LIGHTS, GAUGES
AND INDICATORS
Speedometer
Odometer
TRIP
It is prohibited by law to operate the
odometer illegally.
Tachometer
The Speedometer shows the vehicle's
speed in kilometers per hour (km/h).
Note
In a speed limit zone, please keep to
the speed limit.
The odometer shows how far your
vehicle has been driven in kilometers.
There are two independent trip odometers, which measure the distances your
vehicle has travelled since you last reset
this function.
The ODO, TRIP A and TRIP B can be
switched by pressing the TRIP button.
Note
To reset each trip odometer to zero,
press the TRIP button of the cluster
more than 2 seconds.
Displays the engine speed in revolutions per minute (rpm).
Drive in a low engine speed range for
each gear as much as possible.
Instruments and Controls 57
Fuel Gauge
Control Indicators
Danger
Displays the fuel level in the tank.
Because of the fuel remaining in the
tank, the top-up quantity may be less
than the specified tank capacity.
The fuel gauge display first bar flashes
when level in fuel tank is too low.
Movement of the fuel within the fuel tank
causes the fuel gauge display to change
when you brake, accelerate or turn.
Danger
Before refueling, stop vehicle and switch
off the engine. Never run the tank dry.
Before refueling, switch off engine
and any external heaters with
combustion chambers. Switch off
any mobile phone.
Vaporised fuel can be ignited by
electromagnetic waves or electric
current of mobile phone.
Fuel is flammable and explosive. No
smoking. No naked flames or sparks.
Follow the operating and safety
instructions of the filling station
when refueling.
Remove static electricity on your
hand by touching something able to
release static electricity when
touching or opening fuel cap or
refueling nozzle.
Don't do any action making static
electricity like getting on and off
vehicle when refueling. Vaporised
fuel can be ignited by static
electricity.
The control indicators described are not
present in all vehicles. The description
applies to all instrument versions.
When the ignition is switched on, most
control indicators will illuminate
briefly as a functionality test.
The control indicator colours mean:
Red = Danger, important reminder
Yellow = Warning, information, fault
Green = Confirmation of activation
Blue = Confirmation of activation
58 Instruments and Controls
Control Indicators In The Instrument Cluster
Instruments and Controls 59
Turn Signal
illuminates or flashes green.
Flashes
The control indicator flashes if a turn
signal or the hazard warning flashers
are activated.
Fast flashing
Failure of a turn signal light or
associated fuse.
See Bulb replacement on page 109.
See Fuses on page 115.
See Turn and Lane-Change Signals on
page 66.
Seat Belt Reminder*
Safety belt reminder on front seat
for driver's seat illuminates or flashes
red.
1. After the ignition is switched on,
the control indicator flashes for few
seconds and then illuminates
steadily until the safety belt is
fastened.
2. After the engine is running, the
control indicator flashes for few
seconds and then illuminates
steadily until the safety belt is
fastened.
3. If the vehicle moves more than
250 m (0.15 mile) or the speed is
over 22 km/h (14 mph) with
unfastened safety belt, the control
indicator will flash.
The indicator will illuminate until the
safety belt is fastened.
Warning
Have the cause of the fault eliminated
immediately by CHEVROLET
retailer.
See Airbag system on page 35.
See Safety belts on page 35.
Airbag Warning Light*
Service Vehicle Soon
illuminates red.
When the ignition is switched on, the
control indicator illuminates for about
few seconds. If it does not illuminate,
does not go out after few seconds or
illuminates whilst driving, there is a
fault in the airbag system. The systems
may fail to trigger in the event of an
accident.
Vehicle trouble or deployment of the
airbags may be indicated by continuous
illumination of 9 .
illuminates yellow when the
vehicle needs a service.
It illuminates in combination with a
warning code.
60 Instruments and Controls
Charging System Light
illuminates red.
It illuminates when the ignition is
switched on and goes out shortly.
Illuminates when the engine is
running
Stop, switch off the engine. Battery is
not charging. Engine cooling may be
interrupted.
Seek the assistance of a authorized
CHEVROLET retailer.
Malfunction Indicator Light
illuminates yellow.
It illuminates when the ignition is
switched on and goes out shortly after
the engine starts.
Brake System Warning Light
illuminates red.
Illuminates when the parking brake is
released, if the brake fluid level is too
low or if there is a brake system fault.
See Brake fluid on page 106.
P
Warning
Do not drive with the brake system
warning lamp on.
This may mean your brakes are not
working properly.
Driving with malfunctioning brakes
can lead to a collision resulting in
personal injuries and damage to your
vehicle and other property.
Illuminates after the ignition is
switched on if the manual parking brake
is applied.
See Parking brake on page 92.
Antilock Brake System (ABS)
Warning Light*
illuminates yellow.
Illuminates for a few seconds after the
ignition is switched on. The system is
ready for operation when the control
indicator goes out.
If the control indicator does not go out
after a few seconds, or if it illuminates
while driving, there is a fault in the
ABS. The brake system remains
operational but without ABS regulation.
See Antilock brake system (ABS) on
page 91.
Engine Coolant Temperature
Warning Light
illuminates red.
This lamp tells you that the engine
coolant has overheated.
If you have been operating your vehicle
under normal driving conditions, you
should pull off the road, stop your
vehicle and let the engine idle for a few
minutes.
If the lamp does not go out, you should
switch the engine off and consult
CHEVROLET retailer as soon as possible.
Engine Oil Pressure Light
illuminates red.
It illuminates when the ignition is
switched on and goes out shortly.
Instruments and Controls 61
Illuminates when the engine is
running
Caution
Engine lubrication may be interrupted. This may result in damage to the
engine and/or locking of the drive
wheels.
If the engine oil pressure warning lamp
comes on while driving, pull off the
road, stop the engine and check the oil
level.
Warning
Low Fuel Warning Light
Door Ajar Light
illuminates yellow.
Illuminates when level in fuel tank is too low.
Caution
illuminates red.
It illuminates when a door is open or not
securely latched. Before driving, check
that all doors are properly closed.
Do not let your vehicle run out of
fuel.This can damage the catalytic
converter.
Electric Power Steering (EPS)
Indicator Light
See Diesel catalytic converter on page
93.
See Diesel fuel system bleeding on page
107.
High - Beam On Light
When the engine is off, considerably
more force is needed to brake.
Do not remove key until vehicle has
come to a standstill, otherwise the
steering column lock could engage
unexpectedly.
illuminates blue.
Illuminates when high beam is on and
during headlight flash.
See Headlamp high/low-beam changer
on page 64.
Check oil level before seeking the
assistance of a CHEVROLET retailer.
See Engine oil on page 102.
illuminates green.
Illuminates when the front fog lamps
are on.
See Front fog lamps on page 66.
Fog Lamp Indicator Light*
illuminates yellow.
Illuminates with power steering
disabled.
Failure in the power steering system.
Consult your CHEVROLET retailer.
Illuminates after interruption of
power supply.
The steering angle sensor must be
calibrated to make the power steering
system operational again. For calibration turn the steering wheel from limit
position to limit position.
The control indicator goes out when the
power steering system is operational
again.
62 Instruments and Controls
TELLTALE IP DISPLAY UNIT
Water In Fuel Indicator Light
Glow Plug Indicator Light
Caution
Driving when this warning indicator
is on, can damage the fuel injection
system and the engine. If the
indicator comes on right after a
refuel, it means water was pumped
into the fuel tank. Turn off the engine
immediately. Then, have the water
drained at once.
Illuminates, when the water level, in the
water separator (separated from the
diesel fuel) reaches to the maximum.
If the light comes on and remains on
with the engine running, it indicates the
need for draining of the water separator.
Please visit the nearest CHEVROLET
retailer for the water draining.
The indicator light goes off when the
draining is complete.
Illuminates when the ignition is ON and
stays on for a short time or may go off
right away. The waiting time will vary
according to the engine coolant
temperature.
When the glow plugs are sufficiently
heated for cold starting, the light will go
out. Then the engine should be started.
Lighting 63
LIGHTING
EXTERIOR LIGHTING
Exterior Lamp Controls
Exterior lighting ............................. 63
Interior lighting .............................. 67
Lighting features ............................ 68
The parking lamps will turn off
automatically when the driver's door is
opened after the ignition switch is
turned to LOCK.
ON
OFF
OFF
To turn the head and tail lamps on or off,
twist the end of the combination switch
lever. The light switch has three
positions which activates various lamp
functions as follows:
OFF : All the lamps are off.
: The parking lamps, tail lamps,
number plate lamps and
instrument panel lamps are
illuminated.
: The low-beam headlamps and
all of the above lamps are
illuminated.
64 Lighting
Flash - To - Pass
Headlamp High/Low-Beam
Changer
Warning
ON
OFF
OFF
To switch from low to high beam, push
lever.
To switch to low beam, pull lever.
Note
The headlamp high-beam on
indicator illuminates when headlamps are on high beam.
Always switch the high-beam
headlamps to low-beam when you
approach on coming vehicles or
when other vehicles are ahead.
High-beam headlamps can temporarily blind other drivers, which could
result in a collision.
ON
OFF
OFF
The flash- to-pass feature works with
the low beams on or off.
To flash the high beams, pull the
combination switch lever all the way
towards you, then release it.
The lever will return to its normal
position when you release it. The highbeam headlamps will stay on as long as
you hold the combination switch lever
towards you.
Lighting 65
Headlamp Range Adjustment
Hazard Warning Flashers
Headlamps when driving abroad
The asymmetrical headlamp beam
extends visibility at the edge of the road
at the passenger side.
However, when driving in countries
where traffic drives on the opposite side
of the road, adjust the headlamp to
prevent dazzling of oncoming traffic.
Have the headlamp adjusted by
CHEVROLET retailer.
To adapt headlamp range to the vehicle
load to prevent dazzling: turn knob to
required position.
0 = Front seats occupied.
1 = All seats occupied.
2 = All seats occupied and load
compartment laden.
3 = Driver's seat occupied and load
compartment laden.
Operated with the button.
To activate the hazard warning flashers,
push the button.
To turn off the flashers, push the button
again.
66 Lighting
Turn And Lane-Change Signals
Front Fog Lamps*
Reversing Lamps
The reversing lamps come on when the
ignition is on and reverse gear is
selected.
ON
ON
OFF
OFF
Lever up
= Left indicator
Lever down = Right indicator
If the lever is moved past the resistance
point, the indicator is switched on
constantly. When the steering wheel
moves back, the indicator is automatically deactivated.
OFF
OFF
To turn the fog lamps on, make sure the
parking lamps are on.
And turn the ring on the middle of the
combination switch lever to ON
position.
To turn the fog lamps off, turn the ring
to the OFF position.
Lighting 67
INTERIOR LIGHTING
Misted Lamp Covers
Courtesy Lamp
The inside of the lamp housing may
mist up briefly in poor, wet and cold
weather conditions, in heavy rain or
after washing. The mist disappears
quickly by itself. To help switch on the
headlamps.
Note
The battery can be discharged if the
lamp keep turning on for a long
time
Warning
Avoid using the courtesy lamp while
driving in the dark.
A lit passenger compartment reduces
visibility in the dark, and could cause
a collision.
Operate rocker switch:
: Always off, even when doors are
open.
: Automatic switching on when you
open a door and off after doors are
closed.
: Always on until shut off manually.
68 Lighting
LIGHTING FEATURES
Battery Power Protection
Switching off electric lights
Battery saver is to prevent the battery
from being discharged.
If you open the driver's door, parking
lamps are turned off automatically
when the ignition is switched to LOCK
or ACC position.
The headlamps are turned off, when
ignition is switched to LOCK or ACC
position.
The courtesy lamp will not be applied
with this function.
Infotainment System 69
INFOTAINMENT
SYSTEM*
INTRODUCTION
Introduction .................................... 69
Radio ............................................... 73
Audio players .................................. 75
Steering wheel audio controls* ...... 77
Before using the device for the first
time, please read the following pages to
become familiar with its features.
Infotainment
Warning
Taking your eyes off the road for
extended periods could cause a crash
resulting in injury or death to you or
others. Do not give extended attention
to infotainment tasks while driving.
This system provides access to many
audio and non audio listings.
To minimize taking your eyes off the
road while driving, do the following
while the vehicle is parked:
Ÿ Become familiar with the operation
and controls of the audio system.
Ÿ Set up the tone, speaker adjustments,
and preset radio stations.
Caution
70 Infotainment System
Overview
SCAN/AST
Infotainment System 71
1. [POWER]
• When the power is ON:
- Short Press: Audio mute
on/off.
- Long Press: Turns on/off the
radio.
• When the power is OFF:
- Pressing the power button
turns the power ON.
2. [VOLUME]
• Volume adjustment.
• Tone adjustment in the tone
control mode.
3. [TUNE DOWN]
• Radio mode
- Short Press: 1 step tune-down.
- Long Press: Continuous tunedown.
• CD mode
- Short Press: Previous track or
file playback.
- Long Press: Fast-reverse
playback.
4. [TUNE UP]
• Radio mode
- Short Press: 1 step tune-up.
- Long Press: Continuous tuneup.
• CD mode
- Short Press: Next track or file
playback.
- Long Press: Fast-forward playback.
5. [AUX]
• Auxiliary mode selection.
6. [Aux Socket]
• Socket of Auxiliary Jack.
7. [SOUND]
• Bass/Middle/Treble/Fader/
Balance/Preset EQ adjustment.
8. [SCAN/AST]
• Short Press: Traffic announcement reception setting.
• Long Press: Configuration setting.
- Fav. Page 1~6: Favorite page
setting.
- Auto-store function, search
and memory the best stations.
9. [EJECT]
• Eject the disc from the CD deck.
10. [PRESET] #1~#6
• Radio mode
- Short Press: Recall the prememorized station in the preset
memory.
- Long Press: Store to preset
memory.
• CD mode
- [#1 DIR]: Enable or disable
directory playback mode.
- [#2 RPT]: Enable or disable
repeat playback mode.
- [#3 RDM]: Enable or disable
random playback mode.
- [#4 INT]: Enable or disable
intro-scan playback mode.
72 Infotainment System
11. [CD]
• Compact Disc playback mode
selection.
• CD pause function when CD
playback.
12. [FAV/INFO]
• Radio mode
- Short Press: Selection favorite
page.
- Long Press: Information display of the current station.
• CD mode
- Short Press: Information display of the current track.
13. [BAND]
• Radio mode selection
• Radio mode
- Short Press: AM or FM radio
band selection.
14. [USB]
• USB mode selection.
• USB Pause function when USB
playback.
15. [SEEK UP]
• Radio mode
- Next broadcasting station
search upward.
• CD mode
- Next folder when CD playback.
16. [SEEK DOWN]
• Radio mode
- Previous broadcasting station
search downward.
• CD mode
- Previous folder when CD
playback.
17. [USB SOCKET]
• Socket of USB.
Operation
Power On/Off
Power On
[ Press [POWER] to turn on the
radio.
Power Off
[ Press [POWER] and hold more
than 1 second to turn off the
radio.
Audio Mute
Press [POWER] to make audio mute
when the power is on.
Volume Adjustment
Turn the volume clockwise to increase
the audio volume.
Turn the volume counter-clockwise to
decrease the audio volume.
Infotainment System 73
RADIO
Audio Adjustment
AM - FM Radio
Bass Tone Adjustment
Press the [SOUND] repeatedly until
radio show "Bass" and turn the
[VOLUME] knob clockwise or counter
-clockwise to increase or decrease the
bass effect.
Midrange, Treble, Balance & Fader
Adjustment
Almost same with above "Bass Tone
Adjustment" but select each tone mode.
Preset EQ Selection
Almost same with above "Bass Tone
Adjustment" but select preset EQ
mode.
The kinds of preset EQ Mode are
Radio Mode Selection
Favorite Preset Memory
Press the [BAND] to listen the radio
from other mode.
It has 6 favorite pages and store up to 48
stations regardless of AM or FM band.
Band Change
It can store current station by the
following procedure.
...→OFF →POP →Rock → Country →
Voice → Jazz → Classic→OFF→...
The band changes from AM to FM or
FM to AM all times [BAND] pressed.
Manual Tune Up/Down
Press [TUNE UP]/[TUNE DOWN] to
increase/decrease the frequency.
The frequency increase or decrease 1
step all times [TUNE UP]/[TUNE
DOWN] pressed.
If this button is pressed continuously,
then the frequency increase or decrease
continuously.
Seek Up/Down
Press [SEEK UP]/[SEEK DOWN] to
find next/previous station automatically.
Step 1: Seek station or tune station
manually you want.
Step 2: Select the favorite page by
pressing [FAV/INFO].
Step 3: Press and hold [PRESET #]
more than 1 second.
By above procedure, the 48 stations are
stored in the favorite preset memory.
Recall Favorite Preset
You can listen to the station stored in the
favorite preset by the following
procedure.
Step 1: Select the favorite page by
pressing [FAV/INFO].
Step 2: Press [PRESET #] which
store the station you want to listen
to.
74 Infotainment System
Auto-Store Function
Radio Reception
Auto-store
Radio reception may be disrupted by
static, noise, distortion or loss of
reception due to
n Changes in distance from the
transmitter,
n Multi-path reception due to
reflection and
n Shadowing.
Press [SCAN/AST] more than 1
second, then radio starts auto-store
function, search and memory the best
stations.
Fixed Mast Antenna
To remove the roof antenna, rotate it
counterclockwise. To install the roof
antenna, rotate it clockwise.
Infotainment System 75
AUDIO PLAYERS
CD Player
Caution
Be sure to remove the antenna before
entering a place with a low ceiling or
it may be damaged.
Entering the automatic car wash with
the antenna installed may result in
damage to the antenna or the roof
panel. Be sure to remove your
antenna before entering the automatic car wash.
Install the antenna fully tightened and
adjusted to the upright position to
ensure proper reception.
As the CD is inserted, the radio will
appear on the display and as the CD is
loading, file check will appear on the
display.
Once playback begins, the track and
track number will appear on the display.
If the ignition or radio is turned off with
a CD in the player, it will stay in the
player. When the ignition and radio are
turned on, the CD will start playing
where it stopped, if it was the last
selected audio source.
If playing a CD-R, the sound quality
may be reduced due to CD-R quality,
the method of recording, the quality of
the music that has been recorded, and
the way the CD-R has been handled.
There may be an increase in skipping,
difficulty in finding tracks, and/or
difficulty in loading and ejecting. If
these problems occur, check the bottom
surface of the CD. If the surface of the
CD is damaged, such as cracked,
broken, or scratched, the CD will not
play properly.
If there is no apparent damage, try a
known good CD.
Do not add any label to a CD, it could
get caught in the CD player. If a CD is
recorded on a personal computer and a
description label is needed, try labeling
the top of the recorded CD with a
marking pen instead.
76 Infotainment System
Caution
If you add any label to a CD, insert
more than one CD into the slot at a
time, or attempt to play scratched or
damaged CD’s, you could damage
the CD player. When using the CD
player, use only CD’s in good
condition without any label, load one
CD at a time, and keep the CD player
and the loading slot free of foreign
materials, liquids, and debris.
Pause
RPT (Repeat):
Press [CD] to pause playback while a
CD is playing back.
Press [2 RPT], then CD plays back
current track repeatedly.
"PAUSE" will flash on the display.
To cancel this function, press [2 RPT]
again.
Press [CD] again to start playback.
Next/Previous Track
RDM (Random):
Press [3 RDM], then CD plays back
tracks randomly.
Press [TUNE UP/TUNE DOWN], then
the CD starts playback of the
next/previous track.
To cancel this function, press [3 RDM]
again.
Fast Forward/Fast Reverse
INT (Intro-Scan):
Insert a CD into a CD slot with CD label
up.
Press and hold [TUNE UP/TUNE
DOWN], then the CD plays back fast
forward/fast reverse.
Press [4 INT], then CD plays back just
10 seconds of the current track, jump to
next track and do this action repeatedly.
CD Playback Mode Selection
Next/Previous Folder - Only MP3*
Insert a CD into CD deck, then the CD
goes to the playback mode.
Press [SEEK UP/SEEK DOWN], then
the radio start playback of the
next/previous track.
To cancel this function, press [4 INT]
again.
Disc Insert
CD EJECT
Press the [EJECT], then the disc will be
ejected from the radio.
Pull the disc out of the radio.
DIR (Directory):
Press [1 DIR], then CD plays back the
tracks in the current directory.
To cancel this function, press[1 DIR]
again.
Infotainment System 77
STEERING WHEEL AUDIO
CONTROLS*
Auxiliary Devices
AUX Mode
USB Playback Mode*
USB Playback Mode Selection
Press the [USB] to change to play back
the USB files from other mode.
USB Memory Insertion
Insert a USB memory into the USB
socket, so the radio plays back the USB
files automatically.
USB Extraction
Pull the USB memory from the USB
socket by hand.
* Other functions are same with CD
mode.
The radio has one auxiliary input jack
(diameter 3.5mm) located on the lower
right side of the faceplate.
4
This is not an audio output; do not plug
the headphone set into the front
auxiliary input jack.
You can however, connect an external
audio device such as an iPod, laptop
computer, MP3 player, CD changer,
receiver, etc. to the auxiliary input jack
for use as another source for audio
listening.
AUX In Mode Selection
Press [AUX] in the other playback
mode.
If the auxiliary jack isn't detected for the
presence of an output jack, the aux
mode will be prevented.
1
3
2
1. VOLUME [+/-] Buttons
l
l
Press the buttons to increase /
decrease the volume step.
Hold down the buttons to quickly
up/down the volume level.
2. SEEK Button
l
l
Press the button to change the
registered radio stations or music
track being played.
Hold down the button to quickly
seek up the frequency or forward
78 Infotainment System
through the currently playing
songs.
3. MODE Button
l
Press the button to select Radio,
AUX or CD/MP3/USB/iPod
audio function.
4. POWER[PWR]/ MUTE Button
l Press the button in standby mode
to turn the infotainment system
ON.
l Press the button in any music play
mode to turn the mute function
ON/OFF.
l Press and hold the button to turn
the infotainment system OFF.
Climate Control 79
CLIMATE
CONTROL
Climate control systems ................. 79
Air vents ......................................... 82
Maintenance ................................... 83
CLIMATE CONTROL
SYSTEMS
Air Conditioning System
Warning
Do not sleep in a vehicle with the air
conditioning or heating system on. It
may cause serious harm or death due
to a drop in the oxygen level and/or
body temperature.
Controls for:
Temperature
Air distribution
Fan speed
Heating
Demisting and defrosting
Air recirculation
n
n
n
n
n
n
n Heated rear window
Temperature
Adjust the temperature by turning the
knob.
Red : Warm
Blue : Cold
Air distribution
Select air outlet by turning the centered
knob.
: Bi-level mode: To the face and
foot.
: Foot mode: To the foot well, with
a small amount of the air being
directed to windshield, front door
windows and side air vents.
: Face mode: To the face area.
: Demist/Defrost mode: To the
windshield and front door
windows, with a small amount of
the air being directed to side air
vents.
: Demist/Foot mode: To the
windshield and foot well, with a
small amount of the air being
directed to front door windows
and side air vents.
80 Climate Control
Fan speed
Adjust the air flow by switching the fan
to the desired speed.
Demisting windshield
0
1 23
4
Caution
A temperature difference between the
outside air and the windshield can
make the windshield mist up and
reduce your forward vision.
Do not use the floor/defrosting mode
( ) or the defrosting ( ) mode in
extremely humid weather when the
temperature control is set to blue area.
Otherwise accidents can result,
leading to vehicle damage and
personal injury.
Air Recirculation System
1. Set the recirculation mode to
outside air mode and turn the air
distribution knob to DEFROST .
2. Switch on cooling .
3. Select desired temperature.
4. Adjust the fan control knob to
desired speed.
5. Turn the temperature control knob
to the red area for warm air.
The air recirculation mode is operated
with the
lever.
Selects either outside air or recirculated
inside air.
Warning
Driving with recirculation mode for
prolonged period of time can make
you sleepy. Periodically turn to the
outside air mode for fresh air.
The exchange of fresh air is reduced
in air recirculation mode. In
operation without cooling the air
humidity increases, so the windows
may mist up. The quality of the
passenger compartment air deteriorates, which may cause the vehicle
occupants to feel drowsy.
Heating
Normal heating
1. Turn temperature control knob to red
area for heating.
2. Turn air distribution knob to face or
bi-level mode.
3. Turn fan control knob to desired
speed.
Climate Control 81
Maximum heating
Use the maximum heating mode for
quick heating of the passenger area.
Do not use it for lengthy periods. It can
result in an accident because the
interior air may become stale and the
windows may fog causing loss of
driver's visibility.
To clear the windows, turn the air
distribution knob to ( ) and move the
recirculation lever to outside air mode
to allow fresh air into the vehicle.
For maximum heating:
1. Move recirculation lever to the left
for the recirculation mode.
2. Turn temperature control knob all
the way to the red area for heating.
3. Turn fan control knob to maximum
speed.
4. Turn air distribution knob to face or
bi-level mode.
Cooling
Operated with the u button and is
functional only when the engine and fan
are running.
The air conditioning system cools and
dehumidifies (dries) when outside
temperature is a little above the freezing
point. Therefore condensation may
form and drip from under the vehicle.
If no cooling or drying is required,
switch the cooling system off to save
fuel.
The air conditioning will not operate
when the fan control knob is in the off
position.
Even though the air conditioning is
turned on, the vehicle will produce
warm air if the temperature knob is set
in the red area.
To turn off the air conditioning system,
turn the fan control knob to 0.
Caution
Use only R-134a refrigerant.
Normal cooling
1. Operate the air conditioning
system.
2. Turn temperature control knob to
blue area for cooling.
3. Turn the air distribution knob to
face mode.
4. Adjust the fan control knob to the
desired speed.
Maximum cooling
82 Climate Control
AIR VENTS
Adjustable Air Vents
To achieve maximum cooling during
hot weather and when your vehicle has
been exposed to the sun for a long time:
1. Keep the window open for some
time, or run the blower at maximum
speed in fresh air mode for 2 minutes.
2. Operate the air conditioning system.
3. Move recirculation lever to the left
for the recirculation mode.
4. Turn temperature control knob all
the way to the blue area for cooling.
5. Turn fan control knob to highest
speed.
6. Turn air distribution knob to face
At least one air vent must be open while
cooling is on in order to prevent the
evaporator from icing up due to lack of
air movement.
Caution
The center vent is not closed completely.
Direct the flow of air by tilting and
swiveling the slats.
Using your air conditioning system
while driving up long hills or in heavy
traffic can cause the engine to overheat.
If the engine coolant temperature
warning light indicates that the
engine is overheating, turn the air
conditioning off.
Otherwise your vehicle may be damaged.
Press the cover of each vent to open the
side vents, and rotate it to the direction
you want.
If you do not want the flow, close the
cover of the vent.
Warning
Do not attach any objects to the slats
of the air vents. There is a risk of
damage and injury in case of an
accident.
Climate Control 83
MAINTENANCE
Fixed Air Vents
Air Intake
Additional air vents are located beneath
the windshield and front door windows
and in the foot wells.
Passenger Compartment Air
Filter
The filter cleans dust, soot, pollen,
spore from the air entering the vehicle
through the air intake.
The air intake in front of the windshield
in the engine compartment must be kept
clear to allow air intake. Remove any
leaves, dirt or snow.
Filter replacement:
1. Remove the glove box.
To remove the glove box, open and
pull it up by each side.
84 Climate Control
Service
Caution
More frequent maintenance of the air
filter is required if the driving
circumstances are dusty roads, air
pollution areas, and frequent unpaved
roads.
The filter efficiency is decreased and
the bronchus is badly affected.
2. Remove the filter cover by pulling
right side of the cover.
3. Replace the air conditioner filter.
4. Assemble the filter cover and glove
box in reverse order.
Note
We recommend that you consult
your authorized CHEVROLET
retailer to replace the filter.
Air Conditioning Regular Operation
In order to ensure continuously
efficient performance, cooling must be
operated for a few minutes once a
month, irrespective of the weather and
time of year. Operation with cooling is
not possible when outside temperature
is low.
For optimal cooling performance, it is
recommended to annually check the
climate control system.
n Functionality and pressure test
n Heating functionality
n Leakage check
n Check of drive belts
n Cleaning of condenser and evaporator drainage
n Performance check
Caution
Use only R-134a refrigerant
Warning
Climate control systems are serviced
by qualified personnel only. Improper service methods may cause
personal injury.
Driving and Operating 85
DRIVING AND
OPERATING
DRIVING INFORMATION
Driving information ....................... 85
Starting and operating .................... 88
Starting the engine .......................... 89
Manual transmission ...................... 90
Brakes ............................................ 90
Engine exhaust ............................... 93
Fuel ................................................ 94
Never coast with engine not running
Many systems will not function in this
situation (e.g. brake servo unit).
Driving in this manner is a danger to
yourself and others.
Pedals
To ensure the pedal travel is uninhibited, there must be no mats in the area
of the pedals.
Control Of A Vehicle
Emergency Actions
Caution
Do not operate starter motor for more
than 10 seconds at a time.
If the engine does not start, wait 10
seconds before trying again.
This will prevent starter motor
damage and battery discharge.
Puncture during driving
When driving, turn on the hazard
flashers if a tire is punctured. Hold the
steering wheel firmly, lift your foot off
the accelerator pedal, and slow the
vehicle gradually. Press the brake pedal
gently and drive the car into a safe area
to change the tire.
Warning
Do not brake suddenly when a tire is
punctured. Sudden braking may
cause the vehicle to swing to one side
and cause accidents.
Faults during driving
When a fault occurs while driving, turn
on the hazard flashers. Park the vehicle
in a safe area at the roadside.
A warning triangle should be placed
behind the vehicle at a distance of 50 m
during the day or 100 m at night.
86 Driving and Operating
A warning triangle is stored in the rear
compartment at the time of vehicle
delivery.
Consult your CHEVROLET retailer for
inspection and repair.
Caution
Continuing to drive a vehicle with
problems may cause accidents.
If the engine does not start
If the ignition switch is in the START
position but the starter motor does not
work, check the battery for charge,
battery terminals are connected
properly and concern fuse is blown out.
If the starter motor works but the engine
does not start, check the oil level, the
fuel filter, the fuel pump, the associated
wiring, etc.
The fuel pump can be checked by
listening to the sound when the ignition
switch is turned ON.
Measures to be taken when the
engine is over heated
While driving, if a sudden drop in
power or the temperature warning light
comes on, park the vehicle in a safe
place and take the following measures.
n Run the engine at idle and then
move the gear shift lever into
neutral.
n Apply the parking brake.
n Turn off the air conditioning.
n Open the hood to ventilate the
engine compartment.
Warning
If steam or coolant escapes from the
engine, do not open the hood,
otherwise you may be scalded by the
steam or coolant.
n If the coolant level does not drop
while the engine is idling, switch
off the engine to let it cool down.
If the cooling fan does not work,
switch off the engine to let it cool
down.
n If the coolant level is too low, open
the cap and fill the coolant tank with
coolant very slowly.
Caution
Sudden filling of coolant into an over
heated engine will damage the
engine.
Caution
Do not open the coolant cap when the
engine is hot else steam or coolant
will escape and scald your face or
body. Wait until the engine is
completely cooled before opening
the coolant cap.
Cover the coolant cap with a cloth,
open it a little (1/2 turn) at first, and
do not open it completely until the
pressure inside has been released.
Driving and Operating 87
Driving With Diesel Engine
Vehicle
n After taking temporary measures, seek
assistance from your CHEVROLET
retailer for inspection and necessary
repairs.
In case of fire
A fire might be caused by unauthorized
changes to the electrical and fuel
system or by accidents. Keep a fire
extinguisher inside your vehicle.
No fire extinguisher is provided at the
time of vehicle delivery.
Warning
The fire will soon spread to other
parts of the car as the vehicle contains
many combustible materials such as
various oils, fibers, and plastics.
All passengers should immediately
exit the vehicle and reach to a safe
area.
Do not change the electrical or fuel
systems without authorization, or a
fire might be caused.
Use in the snow
n Slow down when turning a corner,
driving uphill or crossing a bridge.
n Do not park the car on a hard verge
or it may obstruct the snow clearing
work.
n Keep a safe distance from other
cars; avoid unnecessary braking.
n Frequent cleaning of the snow
surrounding the vehicle can protect
the exhaust pipe from being
blocked.
The turbocharger element rotate very
fast. If the oil supply to running parts
stops, the turbocharger system may be
seriously damaged. The owner should
be encouraged to observe the following
precautions to ensure maximum
turbocharger service life.
n After starting the engine, let it run
for about 1 to 2 minutes with idle
speed (avoid acceleration or driving
off the vehicle).
n Do not stop the engine immediately
after coming back from the
highload driving (such as high
speed driving or driving down a
long slope). Let the engine run for
about 1 to 2 minutes at idle speed to
cool it down.
n After changing the engine oil and
oil filter, start the engine and let it
run for about 1 to 2 minutes with
idle speed (avoid acceleration or
driving off the vehicle).
88 Driving and Operating
STARTING AND OPERATING
New Vehicle Break - In
n Operate the engine above idle only
after normal engine oil pressure has
been established. Forcing the
turbocharger to operate before the
bearings are adequately lubricated
creates unnecessary friction.
n Use only the specified engine oil
and observe inspection and
replacement intervals.
n At low ambient temperature, or
when the vehicle has not been used
for a long period, normal engine oil
pressure and flow is affected. Under
these conditions the engine should
be started and allowed to idle for a
few minutes before operating at
higher rpm.
Ignition Switch Positions
Use the following precautions for the
first few hundred kilometers to improve
the performance and economy of your
vehicle and add to its long life:
n Avoid full-throttle starts.
n Allow the engine to warm up before
driving.
n Do not race the engine.
n Avoid hard stops except in emergen-
cies. This will allow your brakes to
bed in properly.
n Avoid quick starts, sudden accelerations, and prolonged highspeed
driving in order to avoid damage to
the engine and to conserve fuel.
n Avoid full-throttle acceleration in
low gear.
n Do not tow any other vehicle.
0 (LOCK) : Ignition off
1 (ACC) : Ignition off, steering
wheel lock released
2 (ON)
: Ignition on, for diesel
engine: preheating
3 (START) : Starting
Driving and Operating 89
STARTING THE ENGINE
Starting Engine With The
Ignition Switch
Warning
Caution
Do not turn the key to 0 or 1 position
while driving.
Vehicle and brake assistance would
not operate, causing vehicle damage,
personal injury or possibly death.
Do not operate starter motor for more
than 10 seconds at a time.
If the engine does not start, wait 10
seconds before trying again.
This will prevent starter motor
damage.
Caution
Do not leave the key in 1 or 2 position
for extended periods while the engine
is not running.
This will discharge the battery.
Caution
Turn key to position 1, move the
steering wheel slightly to release the
steering wheel lock.
n Manual transmission: operate
clutch.
n Do not accelerate.
n Turn the key to position 3, depressing the clutch pedal and footbrake
then release when engine is
running.
Before restarting or to switch off the
engine, turn key back to 1 or 0.
n
Do not idle the engine at high rpm for
more than 3 minutes.
Excessive temperature can damage the
exhaust system / catalytic converter.
Caution
Do not operate the key through the
steering wheel.
Otherwise the steering wheel may
turn suddenly, causing the driver to
lose control over the vehicle and lead
to vehicle damage and injury.
90 Driving and Operating
MANUAL TRANSMISSION
Parking
n
n
n
n
n
n
Do not park the vehicle on an easily
ignitable surface. The high temperature of the exhaust system could
ignite the surface.
Always apply parking brake without pressing release button. Apply
as firmly as possible on downhill or
uphill slopes. Depress the footbrake
at the same time to reduce operating
force.
Switch off the engine and ignition.
Turn the steering wheel until the
steering wheel lock engages.
If the vehicle is on a level surface or
uphill slope, engage first gear
before switching off the ignition.
On an uphill slope, turn the front
wheels away from the kerb. If the
vehicle is on a downhill slope,
engage reverse gear before switching off the ignition. Turn the front
wheels towards the kerb.
Close the windows.
Lock the vehicle.
BRAKES
The brake system comprises two
independent brake circuits.
If a brake circuit fails, the vehicle can
still be braked using the other brake
circuit. However, braking effect is
achieved only when the brake pedal is
depressed firmly. Considerably more
force is needed for this. The braking
distance is extended. Seek the assistance of a CHEVROLET retailer before
continuing your journey.
If the gear does not engage, set the lever
in neutral, release the clutch pedal and
depress again; then repeat gear
selection.
Do not grind the clutch unnecessarily.
When operating, depress the clutch
pedal completely. Do not use the pedal
as a foot rest.
Caution
It is inadvisable to drive with hand
resting on the selector lever.
Caution
If one of the circuits fail, the brake pedal
must be pressed with greater pressure
and the braking distance may be
increased. Have the brake system
checked and repaired by CHEVROLET
retailer immediately.
If the brake pedal can be pressed
further than normal, the brakes may
be in need of repair.
Consult CHEVROLET retailer
immediately.
Driving and Operating 91
Warning
After driving through deep water,
washing the vehicle, or using the
brakes excessively when going down
a steep hill, the brakes can temporarily lose their stopping power. This
may be due to wet brake components
or overheating.
If your brakes temporarily lose their
stopping power because of overheating: Shift to a lower gear when
going down hills. Do not continuously apply the brakes.
Warning
If your brakes temporarily lose their
power because of wet brake
components, the following procedure
will help restore their normal
performance:
1. Check behind you for other
vehicles.
2. Keep a safe forward speed with
plenty of space to your rear and
sides.
3. Gently apply the brakes until
normal performance is restored.
Antilock Brake System (ABS)*
Antilock brake system (ABS) prevents
the wheels from locking.
ABS starts to regulate brake pressure as
soon as a wheel shows a tendency to
lock. The vehicle remains steerable,
even during hard braking.
ABS control is made apparent through a
pulse in the brake pedal and the noise of
the regulation process.
For optimum braking, keep the brake
pedal fully depressed throughout the
braking process, despite the fact that the
pedal is pulsating. Do not reduce the
pressure on the pedal.
The ABS control can be known by
vibration and noise of the ABS process.
See Antilock brake system (ABS)
warning light on page 60.
Caution
ABS will not change the time needed
for braking, neither it will necessarily
shorten the braking distance. Even if
ABS is equipped, an adequate braking
distance should be maintained.
Fault
Warning
If there is a fault in the ABS, the
wheels may be liable to lock due to
braking that is heavier than normal.
The advantages of ABS are no longer
available. During hard braking, the
vehicle can no longer be steered and
may swerve.
Have the cause of the fault remedied by
CHEVROLET retailer.
92 Driving and Operating
Brake Assist
Using ABS
Do not pump the brakes. Just hold brake
pedal down firmly and let ABS work.
You might hear the ABS pump or motor
operating and feel the brake pedal
pulsate, but this is normal.
Braking In Emergencies
ABS allows the driver to steer and
brake at the same time. In many
emergencies, steering can help more
than even the very best braking.
Parking Brake
If the brake pedal is depressed quickly
and forcefully, maximum brake force is
automatically applied (full braking).
Maintain steady pressure on the brake
pedal for as long as full braking is
required. Maximum brake force is
automatically reduced when the brake
pedal is released.
Caution
Do not drive with your foot resting on
the brake pedal. Doing so will
accelerate wear of the brake
components. The brakes may also
become overheated, resulting in
longer braking distance and an unsafe
condition.
Always apply parking brake firmly
without operating the release button,
and apply as firmly as possible on a
downhill or uphill slope.
To release the parking brake, pull the
lever up slightly, press the release
button and fully lower the lever.
To reduce the operating forces of the
parking brake, depress the foot brake at
the same time.
See Brake system warning light on page
60.
Driving and Operating 93
ENGINE EXHAUST
Diesel Catalytic Converter
Warning
If the parking brake is not set
properly, the vehicle may move
suddenly. See your CHEVROLET
retailer if an adjustment is required.
Caution
Do not drive with the parking brake
on.
This can cause your rear brakes to
overheat or wear out prematurely.
You may have to replace them, and
you could damage other parts of your
vehicle.
Caution
Do not park or operate your vehicle
over combustible materials.
They could touch hot exhaust parts
under your vehicle and ignite.
Danger
Engine exhaust gases contain
poisonous carbon monoxide, which
is colourless and odourless and
could be fatal if inhaled.
If exhaust gases enter the interior of
the vehicle, open the windows. Have
the cause of the fault rectified by
CHEVROLET retailer.
Avoid driving with an open load
compartment, otherwise exhaust
gases could enter the vehicle.
Diesel catalytic converter is a device
used to reduce the array of emissions
from an internal combustion engine.
Catalytic converter works by using a
catalyst to stimulate a chemical
reaction in which the by-products of
combustion are converted to produce
less harmful substances, such as the
very poisonous carbon monoxide to
carbon dioxide, hydrocarbons into less
harmful gases.
Caution
Fuel grades other than those listed on
pages Fuel for diesel engines on page
94, could damage the catalytic
converter or electronic components.
Unburnt diesel will overheat and
damage the catalytic converter.
Therefore avoid excessive use of the
starter, running the fuel tank dry and
starting the engine by pushing or
towing.
94 Driving and Operating
FUEL
Fuel For Diesel Engines
In the event of misfiring, uneven engine
running, a reduction in engine performance or other unusual problems, have
the cause of the fault rectified by
CHEVROLET retailer as soon as
possible. In an emergency, driving can
be continued for a short period, keeping
vehicle speed and engine speed low.
Only use diesel fuel that complies with
DIN EN 590. The fuel must have low
Sulphur content (max. 50ppm).
Do not use marine diesel oils, heating
oils or entirely or partially plant-based
diesel fuels, such as rape seed oil or bio
diesel, Aquazole and similar dieselwater emulsions. Diesel fuels must not
be diluted with fuels used on petrol
engines.
The flow and filterability of diesel fuel
are temperature-dependent. When temperatures are low, refuel with diesel fuel
with guaranteed winter properties.
Caution
Use of fuel that does not comply to
EN 590 or similar can lead to engine
power loss, increased wear or engine
damage and loss of warranty.
Filling The Tank
Caution
If you use inappropriate grade of fuel
or put incorrect fuel additives into the
fuel tank, the engine and catalytic
converter may seriously be damaged.
Driving and Operating 95
Caution
Be sure to use the correct fuel (diesel)
corresponding to your vehicle when
refueling. If you fill petrol in your
diesel powered vehicle, your vehicle
can be seriously damaged. If your
vehicle has diesel engine you can
confirm the correct fuel by taking a
look at information on the fuel filler
cap.
For safety reasons, fuel containers,
pumps and hoses must be properly
earthed. Static electricity build up can
ignite the fuel vapor. You can be burnt
and your vehicle may get damaged.
Danger
Before refueling, switch off engine
and any external heaters with
combustion chambers. Switch off
any mobile phone.
Vaporized fuel can be ignited by
electromagnetic waves or current of
mobile phone.
Fuel is flammable and explosive. No
smoking. No naked flames or sparks.
Follow the operating and safety
instructions of the filling station
when refueling.
Remove static electricity on your
hands by touching something able to
release static electricity when
touching or opening fuel cap or
refueling nozzle.
Don't do any action making static
electricity like getting on and off
vehicle when refueling. Vaporized
fuel can be ignited by static
electricity.
Danger
If you can smell fuel in your vehicle,
have the cause of this remedied
immediately by CHEVROLET
retailer.
96 Driving and Operating
Caution
Wipe off any overflowing fuel immediately.
1. Stop the engine.
2. Pull up on fuel filler door release
lever located on the floor, right front
side of driver's seat.
3. Turn the fuel filler cap counterclockwise slowly. If a hissing sound is heard,
wait for it to stop before completely
unscrewing the cap. The fuel filler door
is in the right rear quarter panel.
4. Remove the cap. The cap is tethered
to the vehicle.
5. After refueling, refit cap. Turn it
clockwise until you hear several
clicks.
6. Push the fuel filler door closed until
it latches.
Note
If, in cold weather, the fuel filler
door does not open, tap the door
lightly. Then try to open it again.
Vehicle Care 97
VEHICLE CARE
General information ....................... 97
Vehicle checks ................................ 98
Engine compartment overview ..... 101
Bulb replacement .......................... 109
Electrical system .......................... 115
Vehicle tools ..................................120
Wheels and tires ........................... 120
Jump starting ................................ 127
Towing ......................................... 128
Appearance care ........................... 130
GENERAL INFORMATION
Accessories And Modifications
Vehicle Storage
We recommend to use genuine parts and
accessories and factory approved parts
specific for your vehicle type. We
cannot assess or guarantee for other
products - even if they have a regulatory
or otherwise granted approval.
Do not make any modifications to the
electrical system, e.g. changes of
electronic control units (chip tuning).
Storage for a long period of time
If the vehicle is to be stored for several
months:
n Wash and wax the vehicle.
n Have the wax in the engine compartment and underbody checked.
n Clean and preserve rubber seals.
n Change engine oil.
n Drain washer fluid reservoir.
n Check coolant anti-freeze and
corrosion protection.
n Adjust tire pressure to the value
specified.
n Park vehicle in dry, well ventilated
place. Engage first or reverse gear.
Prevent the vehicle from rolling.
n Do not apply parking brake.
n Open hood, close all doors and lock
the vehicle.
n Disconnect the clamp from the
negative terminal of the vehicle
battery. Beware that all systems are
Caution
Never modify your vehicle. It may
affect the performance, durability and
safety of the vehicle and the warranty
may not cover any problems caused by
the modification.
98 Vehicle Care
VEHICLE CHECKS
Radio Frequency Identification
(RFID) Tag *
not functional, e.g. anti-theft alarm
system.
n Close the hood.
Putting back into operation
When the vehicle is to be put back into
operation:
n Connect the clamp to the negative
terminal of the vehicle battery.
Activate the electronic of the power
windows.
n Check tire pressure.
n Fill up the washer fluid reservoir.
n Check the engine oil level.
n Check the coolant level.
n Fit the number plate if necessary.
This vehicle is equipped with Radio
Frequency Identification (RFID) tag*,
which can be used for Electronic Toll
Collection (ETC) or any other applications as decided by the Regulatory
authority. The RFID tag is located on
inside the windshield. Data for necessary
applications will be added by the agency
authorized by the Regulatory authority,
from time to time. Take proper care during washing or cleaning of windshield so
as to avoid any damage to the RFID tag.
In case of any damage or malfunction of
RFID tag, or in case of windshield
replacement, contact your CHEVROLET
retailer or agency authorized by the
Regulatory authority for the installation
of new RFID tag.
Caution
Do not touch or peel off. Do not place
any sticker or other metallic components
over the RFID tag neither from inside
nor from outside of the windshield.
Avoid exposure to chemicals or liquid
solvents. This will impair the function of
RFID tag. The RFID tag is tamperproof
and will not function once removed
from windshield.
Doing Your Own Service Work
Warning
Only perform engine compartment
checks when the ignition is off.
The cooling fan may start operating
even if the ignition is off.
Vehicle Care 99
Hood
Opening
1. Pull the release lever and return it to
its original position.
2. Push the safety latch to the up and
open the hood.
Warning
When the engine is hot, only touch
the foam padding of the hood support
rod handle .
3. Pull up the support rod lightly from
the holder.
And then secure it at the left side
hook of the engine compartment.
Closing
Before closing the hood, press the
support into the holder.
Lower the hood and allow it to drop into
the latch. Check that the hood is
engaged.
100 Vehicle Care
Warning
Always observe the following
precautions:
Pull on the front edge of the hood to
make sure it is latched securely
before you drive your vehicle.
Do not pull the hood release lever
while your vehicle is moving.
Do not move your vehicle with the
hood open. An open hood will
obscure the driver's vision.
Operating your vehicle with the hood
open can lead to a collision resulting
in damage to your vehicle, to other
property, personal injury or even
death.
Suggestions For More
Economical Operation
Hazardous Driving
Fuel economy is dependent largely on
your style of driving.
How you drive, where you drive and
when you drive affect how many
kilometers you can get from a litre of
fuel.
To obtain maximum fuel economy:
• Accelerate slowly.
• Avoid unnecessary idling.
• Keep the engine properly tuned.
• Do not race the engine.
• Use the air conditioning only when
necessary.
• Slow down when driving on rough
roads.
• Keep the tires inflated to the
recommended pressure.
• Maintain a safe distance from other
vehicles to avoid a collision in case of
sudden stops. This will also reduce
wear on the brake pads and linings.
• Do not carry unnecessary weight.
• Do not rest your foot on the brake
pedal while driving and follow the
maintenance schedule.
When hazardous driving is encountered
due to water, snow, ice, mud, sand, or
similar conditions:
• Slow down your vehicle and drive
cautiously allowing extra distance for
braking.
• Avoid sudden manoeuvres when
braking, steering or accelerating.
• When braking, press the brake pedal
with a light, up-and-down motion
until the vehicle is stopped (Unless
equipped with ABS).
• If stuck in snow, mud or sand, use
second gear to avoid spinning of front
wheels.
Vehicle Care 101
ENGINE COMPARTMENT OVERVIEW
Diesel Engine
1
3
8
2
7
4
6
5
9
102 Vehicle Care
1.
2.
3.
4.
5.
6.
7.
8.
9.
Engine coolant container
Engine oil cap
Brake fluid container
Battery
Engine compartment fuse block
Engine air filter
Engine oil level dipstick
Washer fluid container
Auxiliary fuse block
We recommend the use of the same
grade of engine oil that was used at last
change.
The engine oil level must not exceed the
MAX mark on the dipstick.
Engine Oil
It is advisable to check the engine oil
level manually before embarking on a
long journey.
Check with the vehicle on a level
surface. The engine must be at
operating temperature and switched off
for at least 20 minutes.
Pull out the dipstick, wipe it clean,
insert it to the stop on the handle, pull
out and read the engine oil level.
Insert dipstick to the stop on the handle
and make half a turn.
When the engine oil level has dropped
to the MIN mark, top up engine oil.
MAX
MIN
Caution
Overfilled engine oil must be drained
or suctioned out.
See Capacities and Specifications on
page 142.
Vehicle Care 103
Engine Air Filter
Caution
Overfilling the engine with oil may
affect the operation of engine.
The upper limit mark on the dipstick
must not be exceeded.
Overfilling may damage the vehicle,
because:
— The engine oil consumption will
be increased.
— Excessive carbon accumulation
on the engine.
Caution
Using engine oils of a viscosity other
than recommended could result in
engine damage and repair not
covered under warranty.
Caution
Use of unauthorized or low quality
engine oil could damage the engine.
Warning
Engine oil is an irritant and, if
ingested, can cause illness or death.
Keep out of reach of children.
Avoid repeated or prolonged contact
with skin.
Wash exposed areas with soap and
water or hand cleaner.
Be very careful when draining the
engine oil as it may be hot enough to
burn you!
1. Loosen the air filter cover attaching
screws and open the cover.
2. Replace the air filter.
3. Close the cover with the cover
attaching screws.
104 Vehicle Care
Engine Coolant
Caution
The engine needs clean air to operate
properly.
Do not operate your vehicle without
the air cleaner element installed.
Driving without the air cleaner element
properly installed can damage your
engine.
In countries with cold climate the
coolant provides freeze protection
down to approx. -25°C.
Maintain a sufficient concentration of
anti-freeze.
Caution
Only use approved anti-freeze.
Coolant level
Caution
Too low a coolant level can cause
engine damage.
If the cooling system is cold, the
coolant level should be above the filling
line mark. Fill up if the level is low.
Warning
Allow the engine to cool before
opening the cap. Carefully open the
cap, relieving the pressure slowly.
Fill up with a mixture of demineralised
water and anti-freeze approved for the
vehicle. Install the cap tightly. Have the
anti-freeze concentration checked and
Vehicle Care 105
have the cause of the coolant loss
remedied by CHEVROLET retailer.
Note
If the coolant level falls below the line
mark, refill the coolant reservoir with
recommended coolant available with
your CHEVROLET retailer.
Caution
Plain water or the wrong mixture can
damage the cooling system.
Do not use plain water, alcohol or
methanol anti-freeze in cooling system.
The engine may overheat or even catch
fire.
Caution
Warning
Coolant can be hazardous material.
Avoid repeated or prolonged contact
with coolant.
Clean your skin and nails with soap
and water after coming in contact with
coolant.
Keep out of reach of children.
Coolant can irritate the skin and can
cause illness or death if swallowed.
Caution
It is not needed to add coolant more
frequently than the recommended
interval.
If you are adding coolant often, this
may be a sign that your engine needs
maintenance.
Contact CHEVROLET retailer for a
check of the cooling system.
Warning
106 Vehicle Care
Washer Fluid
Brake Fluid
Warning
Brake fluid is poisonous and corrosive.
Avoid contact with eyes, skin, fabrics
and painted surfaces.
Only use brake fluid approved for the
vehicle.
See "Brake Fluid" under Recommended
fluids and lubricants on page 138.
Caution
Fill with windshield washer fluid that
contains anti-freeze.
To refill windshield washer fluid
reservoir:
n Use only commercially available
ready-to-use washer fluid for that
purpose.
n Do not use tap water. Minerals
present in tap water may plug the
windshield washer lines.
n If air temperature is likely to go
below freezing, use windshield
washer fluid which has sufficient
anti-freezing property.
Make sure you thoroughly clean
around the brake fluid reservoir cap
before removing the cap.
Contamination of the brake fluid
system can affect system performance,
leading to costly repairs.
Caution
The brake fluid level must be between
the MIN and the MAX marks.
When filling up, ensure maximum
cleanliness as contamination of the
brake fluid can lead to brake system
malfunctions. Have the cause of the
loss of brake fluid remedied by
CHEVROLET retailer.
An overflow of brake fluid on the
engine may cause the fluid to burn.
Do not overfill the reservoir.
An engine fire can cause personal
injuries and damage your vehicle and
other property.
Vehicle Care 107
Caution
Do not dispose of used brake fluid with
your household waste.
Use your local, authorized waste
management facility.
Used brake fluid and their containers
are hazardous. They can damage your
health and the environment.
Caution
Brake fluid is harsh and can irritate
skin and eyes.
Do not allow the brake fluid to contact
your skin or eyes. If it does,
immediately wash the affected area
thoroughly with soap and water, or
hand cleaner.
Diesel Fuel System Bleeding
Battery
If the tank has been run dry, the diesel
fuel system must be bled on ground
level after fueling at least 2 litres.
Switch on the ignition three times for 15
seconds at a time. Then start the engine
for a maximum of 10 seconds. Repeat
this process after no less than 10
seconds. If the engine fails to start, seek
the assistance of CHEVROLET
retailer.
The vehicle battery is maintenance free.
Batteries do not belong in household
waste. They must be disposed of at an
appropriate recycling collection point.
Laying up the vehicle for more than 4
weeks can lead to battery discharge.
Disconnect the clamp from the negative
terminal of the vehicle battery.
Ensure the ignition is switched off
before connecting or disconnecting the
vehicle battery.
108 Vehicle Care
Wiper Blade Replacement
Foreign material on the windshield or
wiper blades can reduce the effectiveness of the wipers. If the blades are
not wiping properly, clean both the
windshield and the blades with a good
cleaner or mild detergent. Rinse them
thoroughly with water. Repeat the
process, if necessary.
Warning
Keep smoking materials away from a
battery to avoid flames or sparks
when the battery is checked because
the explosive gas could be occurred.
If the battery explodes, it can be result
in damages of your vehicle and
serious injury or death.
Avoid skin contact with battery acid
because it can cause damage by
contained highly corrosive and toxic
sulfuric acid.
If you accidentally get it on your skin,
flush the place with water and get
medical help immediately.
Keep batteries out of the reach of
children because it contains sulfuric
acid and gas.
Do not allow battery acid to contact
your skin, eyes, clothing or paint.
Do not open and tilt the battery.
See Battery power protection on page
68.
Lift wiper arm. Press release lever and
detach wiper blade.
There is no way to remove traces of
silicone from glass. Therefore, never
apply polish with silicone to your
vehicle's windshield or you will get
streaks which will impair the driver's
vision.
Properly functioning windshield wipers
are essential for clear vision and safe
driving. Regularly check the condition
of the wiper blades.
Do not use solvents, gasoline, kerosene,
or paint thinner to clean wipers. These
are harsh and can damage the blades
and painted surfaces.
Replace hard, brittle or cracked blades
or those that smear dirt on the
windshield.
Vehicle Care 109
BULB REPLACEMENT
Headlamp And Parking Lamps
Switch off the ignition and switch off
the relevant switch or close the doors.
Low beam and high beam
1. Detach plug connector from bulb.
Only hold a new bulb at the base! Do
not touch the bulb glass with bare
hands.
Use only the same bulb type for
replacement.
Replace headlamp bulbs from within
the engine compartment.
Note
After driving in heavy rain or
washing, some exterior lamp lenses
could appear frosty.
This condition is caused by the
temperature difference between the
lamp inside and outside.
This is similar to the condensation
on your windows inside your
vehicle during the rain and doesn't
indicate a problem with your
vehicle.
If the water leaks into the lamp bulb
circuitry, have the vehicle checked
by your CHEVROLET retailer.
3. Press spring clip, disengage it.
Warning
2. Remove protective cover.
The same rating of the bulb to be used
during replacement and any usage of
higher wattage bulbs can cause
thermal issues such as melting of lamp
housing and its surrounding parts.
Warranty would be void if higher
wattage bulbs are being used.
110 Vehicle Care
Caution
If the headlamps need to be re-aimed, it
is recommended that the vehicle is
taken to your CHEVROLET retailer
for service because it is related with
safety.
Parking lamps
1. Detach plug connector from bulb.
3. Remove parking lamp bulb holder
from reflector.
4. Remove bulb from reflector
housing.
5. When fitting a new bulb, engage the
lugs in the recesses on the reflector.
6. Engage the spring clip.
7. Place headlamp protective cover in
position and close.
8. Plug connector onto bulb.
Headlamp aiming
The screw located above the headlamp
is to adjust low-beam headlamp aiming.
2. Remove protective cover.
Vehicle Care 111
Fog Lamps
Front Turn Signal Lamps
Have bulbs replaced by CHEVROLET
retailer.
Foglamp Aiming
The fog lamp aiming can be adjusted
with the screw located above the fog
lamp.
Caution
4. Remove bulb from socket.
5. Insert new bulb.
6. Insert holder in reflector.
7. Place headlamp protective cover in
position and close.
8. Plug connector onto bulb.
If the fog lamps need to be re-aimed, it is
recommended that the vehicle is taken
to your authorized CHEVROLET
retailer for service because it is related
with safety.
1. Rotate bulb holder anti-clockwise
and disengage.
112 Vehicle Care
Taillamps, Turn Signal,
Stoplamp And Back-Up Lamps
2. Push bulb into socket slightly,
rotate anti-clockwise, remove and
renew bulb.
3. Insert bulb holder in reflector, rotate
clockwise to engage.
1. Unscrew both screws.
2. Remove tail light assembly. Take
care that the cable duct remains in
position.
3. Taillamp/Stoplamp (1), Turn signal
lamp (2), Back-up lamp (3).
Vehicle Care 113
Side Turn Signal Lamps
1. Push light towards the back of the
vehicle and remove.
2. Rotate bulb holder anti-clockwise.
3. Pull bulb out of the bulb holder and
renew.
4. Reinstall in reverse order.
4. Rotate bulb holder anti-clockwise.
5. Remove bulb holder. Push bulb into
socket slightly, rotate anti-clockwise,
remove and renew bulb.
6. Insert bulb holder into the tail light
assembly and screw into place.
Connect wiring plug. Install tail
light assembly in body and tighten
screws. Close covers and engage.
7. Switch on ignition, operate and
check all lights.
114 Vehicle Care
Center High-Mounted
StopLamp (CHMSL)
Bulb Type CHMSL
License Plate Lamp
LED Type CHMSL*
Have the bulbs replaced by the
CHEVROLET retailer.
1. Open the tailgate.
2. Remove the two screws and the
lamp housing. Disconnect the
wiring harness connector before
removing the lamp housing.
3. Remove the two screws and the
reflector assembly.
4. Remove the bulb by pulling it
straight out of the bulb holder.
5. Install a new bulb.
6. Reinstall the lamp housing.
1. Unscrew both screws.
2. Remove bulb housing downward,
taking care not to pull on the cable.
Rotate bulb holder anti-clockwise
to disengage.
3. Remove bulb from holder and
renew bulb.
4. Insert bulb holder in bulb housing
and rotate clockwise.
5. Insert bulb housing and secure
using a screwdriver.
Vehicle Care 115
ELECTRICAL SYSTEM
Interior Lamps
Fuses
Fuse Extractor
Courtesy lamps
1. To remove it, pry the opposite side
of the lamp switch using a flat-blade
screwdriver. (Be careful not to
make scratches.)
2. Remove the bulb.
3. Replace the bulb.
4. Reinstall the lamp assembly.
Data on the replacement fuse must
match the data on the defective fuse.
Before replacing a fuse, turn off the
respective switch and the ignition.
A blown fuse can be recognised by its
melted wire (as shown below). Do not
replace the fuse until the cause of the
fault has been remedied. Seek the
assistance of your CHEVROLET
retailer for service.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.
A fuse extractor may be located in the
fuse box in the engine compartment.
Place the fuse extractor on the various
types of fuse from the top or side, and
withdraw fuse.
116 Vehicle Care
Auxiliary Fuse Block
Engine Compartment Fuse
Block
1
2
6
3
4
5
B+
1.
2.
3.
4.
5.
6.
Reverse switch relay
Fuel filter heater relay
Not used
Fuel filter heater fuse
Glow plug fuse
EPS MIDI fuse
The fuse box is in the engine
compartment.
Disengage the cover, lift it upwards and
remove.
Note
Not all fuse box descriptions in this
Manual may apply to your vehicle.
When inspecting the fuse box, refer
to the fuse box label.
Vehicle Care 117
Engine Compartment Fuse Box - Underhood
Fuse
Puller
118 Vehicle Care
Instrument Panel Fuse Block
1. Fuel pump
2. Parking lamp relay
3. Fan low relay
4. Fan high
5. Air condition
6. Fan high relay
7. Air condition relay
8. ABS2
9. Park LH
10. Park RH
11. Front fog
12. Fan low
13. ABS1
14. Front fog relay
15. Fuel pump relay
16. Spare fuse
17. Headlamp high relay
18. Headlamp high
19. Headlamp low LH
20. Headlamp low RH
21. Spare fuse
22. Spare fuse
23. Ignition2/starter
24. Ignition1/accessory
25. Hazard warning flashers
26. Horn
27. Headlamp low relay
28. Horn relay
29. Engine main relay
30. Ignition
31. EMS1
32. EMS2
33. Instrument panel battery
34. 35. Heated seat
36. Heated seat relay
37. Engine control module
38. -
Instrument panel fuse block is located
on the underside of the driver's side
instrument panel.
Vehicle Care 119
Fuse Box - Instrument Panel
1. Open the fuse panel door by pulling
out at the top.
2. Remove the fuse panel door
diagonally.
1. Rear wiper
2. Mirror/outside rear view mirror
3. Headlamp
4. Electric OSRVM
5. Door lock
6. Front wiper
7. Spare fuse
8. Backup lamps
9. Turn signals
10. Rear defogger
11. Rear fog lamps
12. Instrument cluster
13. Blower motor control module
14. Airbag
15. Theft deterrent/data link connector
16. Transmission control module
17. Rear power windows
18. Radio/remote keyless entry/remote
entry
19. Engine control module(ECM)/
theft deterrent
20. Front power windows
21. Cigarette lighter
22. Stop lamp
23. Starter
24. Radio/ clock/ remote keyless entry
25. Airbag
26. -
120 Vehicle Care
VEHICLE TOOLS
WHEELS AND TIRES
Tools
Tire And Wheel Condition
Vehicles with spare wheel
Drive over edges slowly and at right
angles if possible. Driving over sharp
edges can cause tire and wheel damage.
Do not trap tires on the kerb when
parking.
The jack and the tools are in a storage
compartment in the load compartment
above the spare wheel.
See Spare wheel on page 126.
Regularly check the wheels for damage.
Seek the assistance of CHEVROLET
retailer in the event of damage or unusual
wear.
Winter Tires
Winter tires improve driving safety at
temperatures below 7°C and should
therefore be fitted on all wheels.
Tire Designations
E.g. 215/60 R 16 95 H
215: Tire width, mm
60: Cross-section ratio (tire height to
tire width), %
R: Belt type: Radial
RF: Type: RunFlat
Vehicle Care 121
16: Wheel diameter, inches
Warning
95: Load index e.g. 95 is equivalent to
690 kg
If the pressure is too low, this can
result in considerable tire warmup
and internal damage, leading to tread
separation and even to tire blow-out
at high speeds.
H: Speed code letter
Speed code letter:
Q : up to 160 km/h
S : up to 180 km/h
T : up to 190 km/h
H : up to 210 km/h
V : up to 240 km/h
W: up to 270 km/h
Tire Pressure
Check the pressure of cold tires at least
every 14 days and before any long
journey. Do not forget the spare wheel.
Unscrew the valve cap.
Tire pressure label is on the driver’s
door frame.
The tire pressure data refers to cold
tires. It applies to summer and winter
tires.
Always inflate the spare tire to the
pressure specified on the tire pressure
label.
Incorrect tire pressures will impair
safety, vehicle handling, comfort and
fuel economy and will increase tire
wear.
122 Vehicle Care
Tread Depth
Check tread depth at regular intervals.
Tires should be replaced for safety
reasons at a tread depth of 2-3 mm (4
mm for winter tires).
rotation of the wheels is the same as
before.
Tires age, even if they are not used. We
recommend tire replacement every 6
years.
Tire Rotation
Warning
Use of unsuitable tires or wheels may
lead to accidents and will invalidate
the vehicle type approval.
Warning
The legally permissible minimum tread
depth (1.6 mm) has been reached when
the tread has worn down as far as one of
the tread wear indicators (TWI). Their
position is indicated by markings on the
sidewall.
If there is more wear at the front than the
rear, swap round front wheels and rear
wheels. Ensure that the direction of
Do not use different size and type of
tires and wheels than those originally
installed on the vehicle. It can affect
safety and performance of the
vehicle. It could lead to handling
failure or rollover and serious injury.
When replacing tires, be sure to
install all four tires and wheels of the
same size, type, tread, brand and
load-carrying capacity. The use of
any other tire size or type may
seriously affect ride, handling,
ground clearance, stopping distance,
body clearance and speedometer
reliability.
HEX0140
Front tires and rear tires have different
working conditions, and therefore they
wear out at different rates.
Normally, the front tires will wear
faster than rear tires. To make your tires
last longer and to avoid uneven tread
wear:
1. Have the tires rotated according to
the maintenance schedule in the
Manual.
2. Maintain a proper tire pressure.
3. Inspect the tightness of wheel nuts.
Vehicle Care 123
Wheel Covers
Tire Changing
Wheel covers and tires that are factory
approved for the respective vehicle and
comply with all of the relevant wheel
and tire combination requirements
must be used.
If the wheel covers and tires used are
not factory approved, the tires must not
have a rim protection ridge.
Wheel covers must not impair brake
cooling.
Mixing tires could cause you to lose
control while driving.
If you mix tires of different sizes,
brands, or types (radial and bias-belted
tires), the vehicle may not handle
properly, and you could have a crash.
Using tires of different sizes, brands, or
types may also cause damage to your
vehicle. Be sure to use the correct size,
brand, and type of tires on all wheels.
Make the following preparations and
observe the following information:
n Pull over your vehicle to a safe
place away from traffic.
n Park the vehicle on a level, firm and
non-skid surface. The front wheels
must be in the straight-ahead
position.
n Applying the parking brake and
engage first gear or reverse gear.
Warning
Use of unsuitable tires or wheel
covers could lead to sudden pressure
loss and thereby accidents.
n
n
n
n
n
n
n
n
n
n
Turn off the engine and remove key.
Turn on the hazard flashers.
Use a wedge, block of wood, or
rocks in front of and behind the tire
that is diagonal from the tire you
plan to change.
Have all passengers get out of the
vehicle.
Remove the spare wheel. See Spare
wheel on page 126.
Never change more than one wheel
at once.
Use the jack only to change wheels
in case of puncture, not for seasonal
winter or summer tire change.
If the ground on which the vehicle is
standing is soft, a solid board (max.
1cm (0.4 inches) thick) should be
placed under the jack.
No people or animals may be in the
vehicle when it is jacked-up.
Never crawl under a jacked-up
vehicle.
124 Vehicle Care
Do not start the vehicle when it is
raised on the jack.
n Clean wheel nuts and thread before
mounting the wheel.
n
2. Pull out the wheel wrench and
install ensuring that it locates
securely and loosen each wheel nut
by half a turn.
1. Disengage wheel covers with a
screwdriver and remove.
3. Rotate the jack handle to raise the
lift head slightly and place the jack
vertically at the position as shown.
Vehicle Care 125
4. Attach jack handle to the jack and
attach wrench to the jack handle
correctly.
Then raise the jack to join the lift
head at the jacking position firmly.
5. Rotate the wrench checking the
correct position of jack until wheel
is clear of the ground.
6. Unscrew the wheel nuts.
7. Change the wheel.
8. Screw on the wheel nuts.
9. Lower vehicle.
10. Install the wheel wrench ensuring
that it locates securely and tighten
each nut in a crosswise sequence.
Tightening torque is 120 N.m.
11. Align the valve hole in the wheel
cover with the tire valve before
installing.
Install wheel covers.
12. Stow the replaced wheel and the
vehicle tools.
See Tools on page 120.
13. Check the tire pressure of the
installed tire and also the wheel nut
torque as soon as possible.
Have the defective tire renewed or
repaired.
126 Vehicle Care
Spare Wheel
The spare wheel can be classified as a
temporary spare wheel depending on
the size compared to the other mounted
wheels and country regulations.
The spare wheel has a steel rim.
Use of a spare wheel that is smaller than
the other wheels or together with winter
tires could affect driveability. Have the
defective tire replaced as soon as
possible.
Directional Tires
The spare wheel is located in the load
compartment beneath the floor
covering. It is secured in the recess with
a wing nut.
The spare wheel well is not designed for
all permitted tire sizes. If a wheel wider
than the spare must be stowed in the
spare wheel well after changing wheels,
the floor cover can be placed on the
projecting wheel.
Caution
This spare wheel/tire assembly is for
temporary emergency use only.
Replace with regular wheel/tire
assembly as soon as possible.
Do not use tire chains.
Do not install any tire on this wheel
which is not identical to the original.
Do not install on other vehicles.
Fit directional tires such that they roll in
the direction of travel. The rolling
direction is indicated by a symbol (e.g.
an arrow) on the sidewall.
The following applies to tires fitted
opposing the rolling direction:
n Driveability may be affected. Have
the defective tire renewed or
repaired as soon as possible.
n Drive particularly carefully on wet
and snow-covered road surfaces.
Vehicle Care 127
JUMP STARTING
Do not start with quick charger.
A vehicle with a discharged battery can
be started using jump leads and the
battery of another vehicle.
n
n
Warning
Be extremely careful when starting
with jump leads. Any deviation from
the following instructions can lead to
injuries or damage caused by battery
explosion or damage to the electrical
systems of both vehicles.
Avoid contact of the battery with
eyes, skin, fabrics and painted
surfaces. The fluid contains sulphuric
acid which can cause injuries and
damage in the event of direct contact.
Never expose the battery to naked
flames or sparks.
n A discharged battery can already
freeze at temperatures of 0°C.
Defrost the frozen battery before
connecting jump leads.
n
n
n
n
n
n
n
n
Wear eye protection and protective
clothing when handling a battery.
Use a booster battery with the same
voltage (12 V). Its capacity (Ah)
must not be much less than that of
the discharged battery.
Use jump leads with insulated
terminals and a cross section of at
least 16 mm2.
Do not disconnect the discharged
battery from the vehicle.
Switch off all unnecessary electrical consumers.
Do not lean over the battery during
jump starting.
Do not allow the terminals of one
lead to touch those of the other lead.
The vehicles must not come into
contact with each other during the
jump starting process.
Apply the parking brake, transmission in neutral.
Lead connection order:
1. Connect the red lead to the positive
terminal of the booster battery.
2. Connect the other end of the red
lead to the positive terminal of the
discharged battery.
3. Connect the black lead to the
negative terminal of the booster
battery.
4. Connect the other end of the black
lead to a vehicle grounding point,
such as the engine block or an
engine mounting bolt.
128 Vehicle Care
TOWING
Towing The Vehicle
Connect as far away from the
discharged battery as possible,
however at least 60 cm (24 inches).
Route the leads so that they cannot
catch on rotating parts in the engine
compartment.
To start the engine:
1. Start the engine of the vehicle
providing the jump.
2. After 5 minutes, start the other
engine. Start attempts should be
made for no longer than 15 seconds
at an interval of 1 minute.
3. Allow both engines to idle for
approx. 3 minutes with the leads
connected.
4. Switch on electrical consumers
(e.g. headlamps, heated rear
window) of the vehicle receiving
the jump start.
5. Reverse above sequence exactly
when removing leads.
If you need to have your vehicle towed,
contact your CHEVROLET retailer or
professional towing company.
The best method is to have the vehicle
transported using a recovery vehicle.
Vehicle Care 129
If towing by 2 wheels, lift the front
driving wheels and tow with the front
tires locked.
Please observe the following procedures when towing a vehicle:
n No passenger should remain in the
vehicle being towed.
n Release the parking brake of the
towed vehicle and place the transmission gear in neutral.
n Switch on the hazard warning
lights.
n Keep the speed limits.
If it is not possible to have your vehicle
towed by a recovery vehicle, proceed as
follows.
(A)
Disengage the cap by using coin or card
at the arrow position (A) and remove
the cap.
The towing eye is stowed with the
vehicle tools.
See Tools on page 120.
Caution
Drive slowly. Do not drive jerkily.
Excessive tractive force can damage
the vehicle.
Screw in the towing eye as far as it will
go until it stops in a horizontal position.
Attach a tow rope or better still a tow
rod to the towing eye.
The towing eye must only be used for
towing and not for recovering the
vehicle.
Switch on ignition to release steering
column lock and to permit operation of
brake lights, horn and windshield
wipers.
Transmission in neutral.
130 Vehicle Care
APPEARANCE CARE
Towing Another Vehicle
When the engine is not running, considerably more force is needed to brake.
To prevent the entry of exhaust fumes
from the towing vehicle, move the lever
to the air recirculation mode and close
the windows.
Vehicles with manual transmission:
The vehicle must be towed facing
forward, not faster than 88 km/h. In all
other cases and when the transmission
is defective, the front axle must be
raised off the ground.
Seek the assistance of CHEVROLET
retailer.
After towing, unscrew the towing eye.
Insert cap below and close cap.
The best method is to have the vehicle
transported using a recovery vehicle.
Exterior Care
Locks
The locks are lubricated at the factory
using a high quality lock cylinder grease.
Use de-icing agent only when absolutely
necessary, as this has a degreasing effect
and impairs lock function. After using deicing agent, have the locks regreased by
CHEVROLET retailer.
The rear towing eye is located under the
rear bumper.
The towing eye must only be used for
towing and not for recovering a vehicle.
Caution
Drive slowly. Do not drive jerkily.
Excessive tractive force can damage
the vehicle.
Washing
The paintwork of your vehicle is
exposed to environmental influences.
Wash and wax your vehicle regularly.
When using automatic vehicle washes,
select a programme that includes
waxing.
Bird droppings, dead insects, resin,
pollen and the like should be cleaned
off immediately, as they contain
aggressive constituents which can
cause paint damage.
If using a vehicle wash, comply with
the vehicle wash manufacturer's instructions. The windshield wipers and
rear window wiper must be switched
off. Lock the vehicle so that the fuel
Vehicle Care 131
filler flap cannot be opened. Remove
antenna and external accessories such
as roof racks etc.
If you wash your vehicle by hand, make
sure that the insides of the wheel
housings are also thoroughly rinsed out.
Clean edges and folds on opened doors
and the hood as well as the areas they
cover.
Have the door hinges of all doors
greased by CHEVROLET retailer.
Do not clean the engine compartment
with a steam-jet or high-pressure jet
cleaner.
Thoroughly rinse and leather-off the
vehicle. Rinse leather frequently. Use
separate leathers for painted and glass
surfaces: remnants of wax on the
windows will impair vision.
Do not use hard objects to remove spots
of tar. Use tar removal spray on painted
surfaces.
Exterior lights
Headlight and other light covers are
made of plastic. Do not use any
abrasive or caustic agents, do not use an
ice scraper, and do not clean them dry.
When removing insect debris, grease
dirt or tar from the lights or lenses, only
use lukewarm water, a soft cloth and a
car washing soap.
Cleaning with a dry cloth can damage
the light covers. Do not clean with
intensive car washing fluid. Avoid
using hazardous cleaner with the lights
switched on. This can cause the lens to
crack due to chemical reaction.
Note
Follow the car-washing guide and
use mild detergent. Otherwise micro
lens cracks and welding area cracks
could occur. Never use any of the
below mentioned for cleaning:
n
Acetone
n
Benzene
n
Toluene
n
Xylene
n
Thinner
Polishing and waxing
Wax the vehicle regularly (at the latest
when water no longer beads). Otherwise, the paintwork will dry out.
Polishing is necessary only if the paint
has become dull or if solid deposits
have become attached to it.
Paintwork polish with silicone forms a
protective film, making waxing unnecessary.
Plastic body parts must not be treated
with wax or polishing agents.
Windows and windshield wiper
blades
Use a soft lint-free cloth or chamois
leather together with window cleaner
and insect remover.
When cleaning the rear window, make
sure the heating element inside is not
damaged.
For mechanical removal of ice, use a
sharp-edged ice scraper. Press the
scraper firmly against the glass so that
132 Vehicle Care
no dirt can get under it and scratch the
glass.
Clean smearing wiper blades with a soft
cloth and window cleaner.
Wheels and tires
Do not use high-pressure jet cleaners.
Clean rims with a pH-neutral wheel
cleaner.
Rims are painted and can be treated
with the same agents as the body.
Paintwork damage
Rectify minor paintwork damage with a
touch-up pen before rust forms.
Have more extensive damage or rust
areas repaired by CHEVROLET retailer.
Special package and body kit
n Be careful when towing to prevent
damage by the tow rope. Remove
cover in bumper before towing.
n Reduced ground clearance. Drive
slowly over ramps, bumps or kerbs.
n Use support when lifting the vehicle.
n To prevent body damage and
breakage, it is recommended to
completely lift the vehicle onto a
recovery vehicle when transporting
the vehicle.
Underbody
Corrosive materials used for ice and
snow removal or dust control can
collect on the underbody of your
vehicle. Failure to remove these
materials can accelerate corrosion and
rust.
Periodically use plain water to flush
these materials from the underbody of
your vehicle.
Take care to clean any areas in which
mud and other debris can collect.
Loosen any sediment packed in closed
area before flushing with water.
Interior Care
Interior and upholstery
Only clean the vehicle interior,
including the instrument panel fascia
and panelling, with a dry cloth or
interior cleaner.
The instrument panel should only be
cleaned using a soft damp cloth.
Clean fabric upholstery with a vacuum
cleaner and brush. Remove stains with
an upholstery cleaner.
Clothing fabrics may not be colourfast.
This could cause visible discolourations,
especially on light-coloured upholstery.
Removable stains and discolourations
should be cleaned as soon as possible.
Clean seat belts with lukewarm water
or interior cleaner.
Caution
Close Velcro fasteners as open Velcro
fasteners on clothing could damage
seat upholstery.
Plastic and rubber parts
Plastic and rubber parts can be cleaned
with the same cleaner as used to clean
the body. Use interior cleaner if
necessary. Do not use any other agent.
Avoid solvents and petrol in particular.
Do not use highpressure jet cleaners.
Service and Maintenance 133
SERVICE AND
MAINTENANCE
GENERAL INFORMATION
Service Information
Confirmations
General information ...................... 133
Scheduled maintenance ................ 134
Recommended fluids and
lubricants ...................................... 137
In order to ensure economical and safe
vehicle operation and to maintain the
value of your vehicle, it is of vital
importance that all maintenance work
is carried out at the proper intervals as
specified.
Confirmation of service is recorded in
the Service and Warranty booklet.
The date and mileage is completed with
the stamp and signature of the servicing
CHEVROLET retailer.
Make sure that the Service and
Warranty booklet is completed correctly as continuous proof of service is
essential if any warranty or goodwill
claims are to be met, and is also a
benefit when selling the vehicle.
134 Service and Maintenance
SCHEDULED MAINTENANCE
Service Schedules
Maintenance services and record retention are the owner’s responsibility. You should retain evidence that proper maintenance has
been performed on your vehicle in accordance with the scheduled maintenance services chart.
For vehicles with normal annual mileage.
1 Year/15000
1.5 Years/22500
2 Years/30000
2.5 Years/37500
3 Years/45000
3.5 Years/52500
4 Years/60000
4.5 Years/67500
5 Years/75000
5.5 Years/82500
6 Years/90000
6.5 Years/97500
7 Years/105000
MAINTENANCE
ITEM
Kilometers or time in months, whichever comes first
6 months/7500
MAINTENANCE
INTERVAL
I
R
I
I
I
I
I
I
I
I
R
R
I
I
R
I
R
I
I
R
I
I
I
I
I
I
I
I
R
R
I
I
R
I
R
R
I
R
I
I
I
I
I
I
I
I
R
R
I
I
R
I
R
I
I
R
I
I
R
I
I
I
I
I
R
R
I
I
R
I
R
R
I
R
I
I
I
I
I
I
I
I
R
R
I
I
R
I
R
I
I
R
I
I
I
I
I
I
I
I
R
R
I
I
R
I
R
R
I
R
I
I
I
I
I
I
I
I
R
R
I
R
R
I
R
I
ENGINE CONTROL SYSTEM
Drive Belt (Alternator and A/C Compressor)
Engine Oil (1) (3)
Engine Oil Filter (1)
Cooling System and Hose Connections
Engine Coolant (3)
Fuel Filter
Fuel Line and Connections
Air Cleaner Element (2)
PCV Oil Separator with Bolt
Chart Symbols:
I- Inspect these items and their related parts. If necessary, correct, clean, replenish, adjust, rotate or replace.
R- Replace or change
(1) If a vehicle is operated under severe conditions: short distance driving, extensive idling or driving in dusty conditions, change engine oil and the filter every 7,500 kms or 6 months,
whichever comes first.
(2) Inspect the air cleaner element every 7,500 kms or 6 months if vehicle is driven under dusty driving conditions. If necessary, correct, clean or replace.
(3) Refer to “FLUID CHART” on page 142.
Service and Maintenance 135
For vehicles with normal annual mileage.
1 Year/15000
1.5 Years/22500
2 Years/30000
2.5 Years/37500
3 Years/45000
3.5 Years/52500
4 Years/60000
4.5 Years/67500
5 Years/75000
5.5 Years/82500
6 Years/90000
6.5 Years/97500
7 Years/105000
MAINTENANCE
ITEM
Kilometers or time in months, whichever comes first
6 months/7500
MAINTENANCE
INTERVAL
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
R
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
R
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
R
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
CHASSIS AND BODY
Exhaust Pipe & Mountings
Brake / Clutch Fluid (3) (4)
Front Brake Discs & Pads (5)
Rear Brake Drums & Linings (5)
Parking Brake
Brake Line & Connections (Including Booster)
Chassis & Underbody Bolts & Nuts Tight / Secure
Chart Symbols:
I-
Inspect these items and their related parts. If necessary, correct, clean, replenish, adjust, rotate or replace.
R- Replace or change
(3) Refer to “FLUID CHART” on page 142.
(4) Change the brake fluid every 20,000 kms or 2 years (whichever is earlier) if the vehicle is mainly driven under severe conditions:
-
Driving in hilly or mountainous terrain, or
-
Towing a trailer frequently.
(5) More frequent maintenance is required if under severe condition: frequent low-spee d operation in stop-and go traffic or driving in dusty conditions.
136 Service and Maintenance
For vehicles with normal annual mileage.
6.5 Years/97500
7 Years/105000
6 Years/90000
5.5 Years/82500
5 Years/75000
4.5 Years/67500
4 Years/60000
3.5 Years/52500
I
I
I
I
L
R
3 Years/45000
I
I
I
I
L
I
2.5 Years/37500
I
2 Years/30000
I
1.5 Years/22500
1 Year/15000
MAINTENANCE
ITEM
Kilometers or time in months, whichever comes first
6 months/7500
MAINTENANCE
INTERVAL
I
I
I
I
I
I
L
I
I
I
I
I
L
R
CHASSIS AND BODY
Tire Condition, Inflation Pressure & Rotation
Wheel Alignment (6)
Wheel Balancing (6)
Steering Wheel & Linkage
Manual Transmission Fluid
Drive Shaft Boots
Safety Belts, Buckles & Anchorages
Lubricate Locks, Hinges & Hood Latch
Pollen Filter
I
I
I
I
I
I
I
I
I
I
As and when required or as suggested by CHEVROLET retailer
As and when required or as suggested by CHEVROLET retailer
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
L
L
L
L
L
L
L
L
L
L
I
R
I
R
I
R
I
R
I
R
Chart Symbols:
I-
Inspect these items and their related parts. If necessary, correct, clean, replenish, adjust, rotate or replace.
L- Lubricate
R- Replace or change
(6 ) If necessary, rotate and balance wheels.
Service and Maintenance 137
RECOMMENDED FLUIDS
AND LUBRICANTS
Additional Servicing
Extreme operating conditions
Extreme operating conditions are given
when at least one of the following
occurs frequently:
n Repeated short-distance driving
less than 5 miles (10 kms).
n Extensive idling and/or slow-speed
driving in stop-and-go traffic.
n Driving on dusty roads.
n Driving on hilly or mountainous
terrain.
Caution
Chevrolet recommends to consult
authorized CHEVROLET retailer
for instructions and vehicle health
check-up before setting out a long
journey.
n
n
Towing a trailer.
Driving in heavy city traffic where
the outside temperatures regularly
reach 90° F (32°C) or higher.
Driving as a taxi, police or delivery
vehicle.
n Frequent driving when outside
temperature remains below freezing.
Police vehicles, taxis and driving
school vehicles are also classified as
operating under extreme conditions.
Under extreme operating conditions, it
may be necessary to have certain
scheduled service work done more
frequently than the scheduled intervals.
Seek technical advice on the servicing
requirements dependent on the specific
operating conditions.
n
Only use products that have been tested
and approved. Damage resulting from
the use of non approved materials will
not be covered by the warranty.
Warning
Operating materials are hazardous
and could be poisonous. Handle with
care. Pay attention to information
given on the containers.
Engine oil
Engine oil is identified by its quality
and also its viscosity. Quality is more
important than viscosity when selecting
which engine oil to use.
Selecting the right engine oil
Selecting the right engine oil depends
on both the proper oil specification and
viscosity grade.
Engine oil :
5W-30 ACEA A3/B4
138 Service and Maintenance
Engine oil additives
The use of engine oil additives could
cause damage and invalidate the
warranty.
Engine oil system flushes are not
recommended and could cause engine
damage not covered by the vehicle
warranty.
Coolant and antifreeze
Use only organic acid type-long life
coolant (LLC) antifreeze.
In countries with cold climate the
coolant provides freeze protection
down to approx. -25°C. This
concentration should be maintained all
year-round.
Coolant additives intended to give
additional corrosion protection or seal
against minor leaks can cause
functional problems. Liability for
consequences resulting from the use of
coolant additives will be rejected.
Coolant : Ethylene Glycol (Organic
acid type long life coolant)
Brake / Clutch fluid
Only use our authorized brake fluid for
this vehicle (DOT 4).
Over time, brake fluid absorbs moisture
which will reduce braking effectiveness. The brake fluid should therefore
be replaced at the specified interval.
Brake fluid should be stored in a sealed
container to avoid water absorption.
Ensure brake fluid does not become
contaminated.
Manual transmission fluid
Only use Shell XGP SAE75W85 fluid.
Technical Data 139
TECHNICAL DATA
VEHICLE IDENTIFICATION
Vehicle Identification Number
Identification Plate
The vehicle identification number is
located under the rear seat cushion.
The identification plate is located in the
engine compartment.
Vehicle identification ................... 139
Vehicle data .................................. 140
Capacities and specifications ....... 142
140 Technical Data
VEHICLE DATA
Engine Data
Engine identifier code
Type
Bore x Stroke, mm
Number of cylinders
Piston displacement, cc
Engine Power [kW] at rpm
Torque [Nm] at rpm
Gear Box
10FCD
3-Cylinder/in line, 4 stroke,DI,
TCIC
69.7 x 82
3
936
42 kW @ 4000 rpm
142.5 Nm @ 1750 rpm
Brakes
Service Brake Description
Auto Slack Adjuster
ABS
Front Brakes
Rear Brakes
Hydraulic , vacuum assisted,
diagonal circuit with auto
slack adjuster
Rear brake
Optional
Disc
Drum
Type / Model
No. of gears
Gear ratios
1st
2nd
3rd
4th
5th
Reverse
Drive axle
Front axle ratio
Mechanical, Tunnel mounted gear shift
lever, Manual transmission
5 Forward 1 Reverse
3.667
1.960
1.243
0.950
0.761
3.545
Front
3.895
Technical Data 141
Vehicle Dimensions
Suspension
Type and Description
Spring
Anti-Roll Bar
Shock Absorbers
Front: McPherson Strut Type
Suspension
Rear : Compound Crank Type
Front : Side Load
Compensation Spring
Rear : Linear Spring
Front : Solid Bar Type
Rear : N/A
Front : Twin Tube Strut Type
(Gas)
Rear : Twin Tube Shock
Absorbers Type (Gas)
3640
1595
1520
2375
1408
1403
9690
175
Vehicle Weight
Kerb Weight (kg)
Gross Vehicle Weight (kg)
Chassis
Type
Overall Length (mm)
Overall Width (mm)
Overall Height (mm)
Wheel Base (mm)
Front Wheel Track (mm)
Rear Wheel Track (mm)
Turning Circle Diameter (mm)
Minimum Ground Clearance (mm)
1027
1417
Monocoque
Wheels and Tires
Steering
Type and Description
Type : Rack & Pinion Steering
System
Description: Electric Power
Assisted
Wheel Rim Size
Tire Type
14 x 4.5J (Alloy)
14 x 4.5J (Steel)
Radial, Tubeless
142 Technical Data
CAPACITIES AND SPECIFICATIONS
Tire Pressures
Fluid Chart
Tire and Seating Information
Item
Classification
Engine oil
(Including
oil filter)
5W-30 ACEA A3/B4
3.5L
XGP SAE 75W85
Ethylene Glycol
(Organic acid type
long life coolant)
2.0L
DOT 4
0.5L
Transmission oil
Engine coolant
Brake fluid
Capacity
FRONT 2
TIRE
SIZE
COLD TIRE PRESSURE
FRONT
165/65R14
235 kPa, 34 psi, 2.3 bar
REAR
165/65R14
235 kPa, 34 psi, 2.3 bar
REAR 3
4.74L
Bulb Specifications
Bulb
Fuel Tank
Diesel, nominal capacity
TOTAL 5
OCCUPANTS
35L
Wattage
Head lamp (High /Low) H4 60/55W
Parking lamp
5W
Front Turn signal lamp
21W
35W
Fog lamp*
5W
Side turn signal lamp
21W
Turn signal lamp
21/5W
Brake/Tail lamp
21W
Reversing lamp
Rear
5W
CHMSL (Bulb type)
CHMSL (LED type)* LED module
5W
Number plate lamp
10W
Interior Dome lamp
Qty Remarks
2
2
2
2
2
2
2
2
5
2
1
Halogen
Amber
Halogen
Amber
Service and Warranty 143
SERVICE AND
WARRANTY
Standard limited warranty
coverage ....................................... 144
Pre delivery inspection and
vehicle delivery ............................ 153
Owner's statement of
acceptance .................................... 155
Chevrolet service ......................... 157
Maintenance record sheet ............ 163
Battery .......................................... 165
Separate corrosion protection
service .......................................... 166
Body inspection record ................ 167
Emission warranty ....................... 169
Annexure - I ................................. 173
Annexure - II ................................ 174
144 Service and Warranty
STANDARD LIMITED WARRANTY COVERAGE
1. SCOPE
General Motors India Private Limited, a private limited company incorporated under the companies Act 1956 and having its
Registered office at Chandrapura Industrial Estate, Halol, District Panchmahals, Gujarat - 389351 and Works at A-16, MIDC
Talegaon Industrial Area (Phase-II), Near Floriculture Park, Talegaon Navlakh Umbhre Village Road, Tehsil-Maval, Pune 410507, Maharashtra (“General Motors India”) warrants that your new Chevrolet Beat ("vehicle") is free from defect in
material or workmanship, subject to your compliance with the following terms and conditions mentioned hereunder and other
vehicle maintenance norms as mentioned elsewhere in this service booklet.
Only an authorized CHEVROLET retailer as mentioned in this booklet will make the necessary repairs, using new, re-conditioned or remanufactured parts with a view to correcting any defect covered by this warranty.
2. WHAT IS COVERED
Time and distance limits for New Vehicle Warranty coverage.
Warranty Type
Warranty Limits
Other Warranties
A : General
Three (3) years or 1,00,000 kms
(whichever is earlier) from the date of
delivery by a CHEVROLET retailer or
the date of first registration of the motor
vehicle, whichever occurs first.
These parts are covered by other warranties :
1. Battery (one (1) year) (covered by the battery manufacturer**)
2. Tires (one (1) year) (covered by the tire manufacturer**)
3. Audio/Radio/Acc. (one (1) year)
(covered by the Audio/Radio/Acc. manufacturer**)
See clause 5.
B : Rust Through*
Three (3) years from the date of delivery
of the motor vehicle or from the date of
first registration of the motor vehicle,
whichever occurs first.
The warranty covers exterior body metal except :
1. Items not covered by warranty listed in Clause 3
2. Exhaust pipe and fuel system rust
* A hole through a body panel caused by rust / corrosion from inside to outside.
** Service / warranty shall be provided by the concerned equipment manufacturer.
Service and Warranty 145
•
The obligation under this New Vehicle Warranty is limited to the repair of the new motor vehicle at no charge by the CHEVROLET
authorized retailer. For parts replaced during such repair the same warranty applies until the end of the New Vehicle Warranty period
as stipulated herein. All warranty claims expire at the end of the warranty period as specified under Clause 2. The Owner is
responsible for any repair or replacement which are not covered by this warranty.
•
Liability of General Motors India Pvt. Ltd. under this New Vehicle Warranty is limited to the value of the service, repairs/
replacement of parts found to be defective within the warranty period. Beyond servicing and/or repairing defective parts in the
vehicle, General Motors India Pvt. Ltd. does not undertake to replace the vehicle / or reimburse the purchaser by payment of any
money in respect of the vehicle purchased by them.
•
Under the terms of New Vehicle Warranty, installation, free service will be provided only within the municipal limits of the
cities/towns where General Motors India Pvt. Ltd. has its service network, as elaborated elsewhere in this Owner's Manual. This
list of authorized retailers is subject to change/modification without prior notice. Service outside the municipal limits specified
above will be provided after charging the actual to and fro traveling and incidental expenses, as prevailing from time to time.
•
Necessary care and caution is taken in manufacturing of the vehicle, however, General Motors India Pvt. Ltd. shall not be liable for
any loss or damage caused to any article, property, death or disability caused to any human life arising out of fire, electric fault, short
circuit, accidental handling or negligent use of the vehicle. The maximum liability in monetary terms shall be restricted to the value
of the defective parts and / or value of services rendered only. Furthermore, the New Vehicle Warranty, in no case, shall extend to the
payment of any monetary consideration whatsoever, of the replacement or return of the vehicle as a whole.
•
The decision of General Motors India Pvt. Ltd. will be final and binding on all matters arising out of this New Vehicle Warranty.
•
The owner should preserve the original Invoice for necessary verification and produce the same, as and when required.
•
The optimum performance of the vehicle is under standard test conditions.
This New Vehicle Warranty is issued at Talegaon, District Pune, Maharashtra and competent courts shall have exclusive jurisdiction
over matters by or following from time to time.
146 Service and Warranty
3. WARRANTY LIMITATIONS
The warranty will cease to exist in following conditions:
a. Failure to have the required periodic inspection and required service performed as per the Periodic Maintenance Schedule.
b. Improper or wrong maintenance and in deviation with guidelines mentioned in this service booklet.
c. Any modification, alterations made to the vehicle such as including but not restricted to adding lights, changing engine specifications
to increase horsepower, or using wide tires, and or any other modification in the vehicle that may likely to have an effect on the
performance of the vehicle. (e.g. defects caused by the installation of non homologated wheels and tires are not covered by the
warranty.)
d. Failure to use genuine parts / fluids (oil, coolant, brake fluid) and/or other accessories / consumables recommended or approved by
General Motors India Pvt. Ltd.
e. Use of the vehicle for purposes or in a manner other than the one mentioned in the Owner's Manual. Exceeding specified capacities
such as loading weight, passenger, speed, use as a commercial vehicle and rpm limitations.
f. Damage caused by driving the vehicle under severe conditions such as un-pliable or water-logged roads, in races or rallies.
g. Damage caused by natural disasters including but not restricted to earthquakes, storms, floods, fire and accidents. The owners are
recommended to keep their vehicle insurance valid at all times.
h. Damage caused by smoke, chemicals, bird-droppings, salt, stone chipping, scratches, iron dust or any other extraneous
circumstances like external mechanical or chemical influences (regarding paint or body damage, specially stone throw, air-borne
rust, industrial fall out), damage to catalytic converter due to use of wrong/bad quality fuel acting on the vehicle.
i. Damage caused by normal wear (for instance brake-pad, etc.) or exposure to the elements such as discoloring or deformation of any
interior, plastic, chrome or painted part or surface.
j. Sensory complaint by the owner against symptoms such as noise, vibration or oil stains which do not effect performance.
Service and Warranty 147
k. Damage which should have been detected during normal usage but became serious when left unattended to and/or the owner of the
vehicle having failed to claim and having rectified a defect which was already apparent during vehicle delivery, immediately after
delivery or a defect which becomes apparent at a later date immediately after it became apparent.
l. Failure of the owner to adhere to the requirements outlined in Clause 4.
m. Fuel system damage caused by water or other foreign matter in the fuel system.
n. Damage caused by the installation of non genuine accessories or equipment after the vehicle has been purchased from the
CHEVROLET retailer such as radio, car telephone, CD radio set, or cargo carrier and / or other activities of a similar nature.
o. Damage caused by running vehicle on adulterated fuel/lubricants or fuel/lubricants other than those specified by General Motors
India Pvt. Ltd.
WHAT IS NOT COVERED
•
Adjustments, cleaning, inspection, or required periodic maintenance.
•
Parts designated as requiring periodic replacement.
•
Warranty repair not performed by a CHEVROLET retailer.
•
Charges or fees for telephone, tow, transportation charges of the vehicle to the nearest CHEVROLET retailer, rental car, and so forth;
compensation for inconvenience or commercial losses; all other consequential costs relating to the owner being unable to use the
vehicle.
•
Any accident, damage, loss or destruction due to negligent, careless use of vehicle.
•
Damage to the engine while driving in water logged conditions or entry of water in to the engine.
•
Consumptive parts and oil/grease and other fluids. (See the following tables of consumptive parts and oil/grease and other fluids.)
148 Service and Warranty
Consumptive Parts
Drive belts
Air cleaner element
Fuel filter
Oil filter
Clutch disc, clutch parts
Brush holders
Brake shoe and pads
Brake discs
Brake drums
Wiper blades
Light bulbs
Motor brushes
Fuses, etc.
Oil/Grease and other fluids
Engine oil
Transmission oil
Brake fluid
Coolant
Grease
Washer fluid
Battery fluid
Diesel
Air conditioner refrigerant
Other lubricants, etc.
No warranty repair shall be made if it is found that the vehicle Identification number like chassis / engine number, odometer or the
warranty & service booklet, have been tampered with. This list is neither exclusive nor exhaustive and the decision of General Motors
India Pvt. Ltd. shall be final and binding.
Service and Warranty 149
4. WHAT THE OWNER MUST DO
In order to keep this warranty valid you must:
a. Use your vehicle as instructed in the Owner’s Manual.
b. Have your vehicle inspected according to this schedule.
The cost of the service is borne by the owner. If the services are not performed within the specified time limits, the general and the rust
through warranty as referred to under Clause 2 above, shall be rendered null and void and shall not be reinstated by a subsequent
service.
c. Keep the warranty & service booklet (Owner’s Manual) and all receipts in a safe place to present to the CHEVROLET retailer at
regular maintenance visits and when repair work is required.
5. PARTS COVERED BY OTHER WARRANTY CONDITION
a. Battery : The coverage period is 1 year from the date of new vehicle registration regardless of the distance traveled.
b. Tires : This warranty is covered by the tire manufacturer. The coverage period is one year. Please check with your CHEVROLET
retailer for details.
c. Audio/Radio/Acc. : This warranty is covered by the audio/radio/Acc. manufacturer. The coverage period is one year. Please check
with your CHEVROLET retailer for details.
6. MAKING THE WARRANTY EFFECTIVE
The warranty goes into effect after CHEVROLET authorized retailer fills in the appropriate information about your vehicle and
places the retailer's official seal and signature in the warranty & service booklet (Owner’s Manual).
7. REQUIREMENTS FOR WARRANTY WORK
To have warranty work carried out, present the warranty & service booklet to the authorized CHEVROLET retailer as mentioned in
this booklet. If the warranty & service booklet is lost or incomplete, work to be carried out with respect to the standard warranty shall
be refused.
150 Service and Warranty
8. CHANGE OF OWNERSHIP
If the vehicle is sold during the warranty period, please deliver the warranty & service booklet to the new owner.
The new owner will need to complete the change of address or subsequent ownership notification card located elsewhere in this
booklet in order for the coverage to be transferred.
9. EXPENSES ASSOCIATED WITH WARRANTY WORK
The expenses of repair work and parts of your CHEVROLET vehicle will be covered by CHEVROLET standard limited warranty in
accordance with the WARRANTY & SERVICE BOOKLET (OWNER’S MANUAL). Other expenses that are not covered by the
CHEVROLET Standard Limited Warranty must be covered by the owner.
10. General Motors India Private Limited is launching the CHEVROLET Beat in different cities in a phased manner. The CHEVROLET
retailer responsible for delivering your Beat is qualified to provide all Beat related services within the city where he is located. As
other CHEVROLET retailers become operational to handle the Beat, they will also be able to provide similar Beat related services.
IN ORDER FOR THE WARRANTY ON YOUR VEHICLE TO APPLY, IT IS IMPERATIVE THAT YOUR BEAT BE SERVICED,
HANDLED AND ATTENDED TO ONLY BY CHEVROLET RETAILER AS SET FORTH IN THIS BOOKLET.
11. The following requisite document should be presented to the CHEVROLET retailer at the time of making a claim under New Vehicle
Warranty:
•
Original invoice issued by CHEVROLET retailer.
•
Warranty and service booklet / maintenance record.
•
Any other document deemed to be necessary by CHEVROLET retailer and/or General Motors India Pvt. Ltd.
Service and Warranty 151
152 Service and Warranty
Service and Warranty 153
PREDELIVERY INSPECTION AND VEHICLE
DELIVERY
Before delivering the vehicle we carried out a thorough
predelivery inspection in order to ensure that your Chevrolet
vehicle is in a fault-free condition. Accompanying this
appropriately filled out service booklet (Owner's Manual) are the
tool kit and your vehicle documents.
You have been informed of the service intervals and necessary
service checks, including under extreme operating conditions
and in particular with regard to oil changing of diesel engines.
City, date :
CHEVROLET Retailer’s / ASO’s Stamp and Signature
154 Service and Warranty
Service and Warranty 155
OWNER’S
STATEMENT OF ACCEPTANCE
I hereby certify that the vehicle has been delivered in an orderly
and proper operating condition, including Keys, Service booklet (Owner's Manual) and Tool kit. I have read and understood the terms and conditions pertaining to the New Vehicle
Warranty and agree to abide by the same.
I have been informed of the service intervals and necessary
service checks, including under extreme operating conditions.
Date of delivery :
City, date :
Name and signature of customer :
This sheet must be detached prior to vehicle delivery and placed with the vehicle file after it has been signed by the customer.
156 Service and Warranty
Service and Warranty 157
1000 kms/30 days reassurance check-up (whichever is earlier)
Dear Customer,
VIN no. __________________________________________
PDI no. __________________________________________
We are confident that you and your family would be enjoying
the safe and comfortable drive of the Chevrolet Beat.
Date of service_____________________________________
Date of delivery____________________________________
We would like to undertake a thorough check-up of the
vehicle at 1000 kms or 30 days, whichever occurs earlier.
This will also allow us to re-emphasize the salient features of
the Beat to you.
In the unlikely event of an emergency assistance, please
call your nearest CHEVROLET retailer as mentioned in
this booklet or please feel free to call our 24 hr. helpline at
1800 3000 8080.
Retailer code ______________________________________
Customer’s name___________________________________
Customer’s tel. no. _________________________________
I confirm that the vehicle has been inspected and delivered to
my satisfaction.
Retailer's Signature
Customer’s Signature
158 Service and Warranty
1000 kms Reassurance check-up
General Status review
Check closing efforts of doors,
keyless entry system & other
functions
Under hood
Visually check routing, leaks &
damage
— Check fluid levels
— Engine oil level
— Brake/clutch oil level
— Coolant level
— M/T oil
Windshield washer level & add
washer fluid
Underbody, wheels
Visually check routing, leaks &
damage
Check tire pressure
Electrical Checks
Malfunction indicator lamp
Service vehicle soon lamp
Charging lamp
Oil pressure lamp
Parking brake lamp/indicator
High beam/Turn signal Hazard
indicator & all other telltale lamp
Cigarette lighter/rear defogger
Check lighting system
Horn/Radio/Outside Mirrors
High/Low beam/Hazard signal
Turn signal/Flash to pass signal
Front/Rear fog lamps/Tail lamps
Stop lamp/Reversing lamp/Trunk
lamp
Dynamic Evaluation
Steering function/noise/abnormal
drag
Clutch & gear shifting function/
noise
Accelerating & braking function/
noise
Check tires
Any other abnormal noise
Service and Warranty 159
CHEVROLET Inspection
CHEVROLET Inspection
2nd Service Check 1 year / 15000 kms whichever occurs earlier
1st Service Check 6 months / 7500 kms whichever occurs earlier
VIN ______________________________________________
VIN ______________________________________________
Regn. No.__________________________________________
Regn. No.__________________________________________
Delivery date _______________________________________
Delivery date _______________________________________
Date of service _____________________________________
Date of service _____________________________________
Kms _____________________________________________
Kms _____________________________________________
I confirm that the job has been attended to my satisfaction.
I confirm that the job has been attended to my satisfaction.
Customer’s Signature
Customer’s Signature
Labour free & Parts are chargeable
(Retain with job card)
Labour free & Parts are chargeable
(Retain with job card)
160 Service and Warranty
Delivering Retailer’s stamp & date
Delivering Retailer’s stamp & date
I hereby certify that the work has been carried out as per the
schedule.
I hereby certify that the work has been carried out as per the
schedule.
Servicing Retailer’s / ASO stamp & date
Servicing Retailer’s / ASO stamp & date
Service and Warranty 161
CHEVROLET Inspection
CHEVROLET Inspection
4th Service Check 2 years / 30000 kms whichever occurs earlier
3rd Service Check 1.5 years / 22500 kms whichever occurs earlier
VIN ______________________________________________
VIN ______________________________________________
Regn. No.__________________________________________
Regn. No. __________________________________________
Delivery date _______________________________________
Delivery date _______________________________________
Date of service _____________________________________
Date of service ______________________________________
Kms _____________________________________________
Kms _____________________________________________
I confirm that the job has been attended to my satisfaction.
I confirm that the job has been attended to my satisfaction.
Customer’s Signature
Customer’s Signature
Labour & Parts are chargeable
(Retain with job card)
Labour & Parts are chargeable
(Retain with job card)
162 Service and Warranty
Delivering Retailer’s stamp & date
Delivering Retailer’s stamp & date
I hereby certify that the work has been carried out as per the
schedule.
I hereby certify that the work has been carried out as per the
schedule.
Servicing Retailer’s / ASO stamp & date
Servicing Retailer’s / ASO stamp & date
Service and Warranty 163
MAINTENANCE RECORD SHEET
(Repair category - Free Service/Paid Service/Running Repair/Accident Repair)
Repair
Date
R.O. No.
Kms.
Repair
Category
Details of Repair Done
Name of Servicing
Retailer
Service
Adv. Sign.
Retailer Stamp
164 Service and Warranty
MAINTENANCE RECORD SHEET
(Repair category - Free Service/Paid Service/Running Repair/Accident Repair)
Repair
Date
R.O. No.
Kms.
Repair
Category
Details of Repair Done
Name of Servicing
Retailer
Service
Adv. Sign.
Retailer Stamp
Service and Warranty 165
BATTERY
•
Battery type :
Battery make :
•
•
Defects arising out of faulty vehicle electrical systems, negligent
maintenance, incorrect charging or improper filling of the battery by
unauthorized dealers/auto electricians are not covered by warranty.
Consequent liabilities are not covered by this warranty policy.
Get Battery checked every 3 months.
Battery batch code/ Sl. No. :
Important Instructions
•
The battery must be fitted firmly in the cradle.
•
Connecting cables and connectors must be fastened securely on to the
battery.
•
Connections must be made in the right polarity.
•
Terminals must be kept coated with petroleum jelly/vaseline. DO
NOT USE GREASE.
•
Battery top & vent plugs must always be kept clean & dry .
•
Electrolyte level must always be maintained in line with the bottom of
the vent hole. In case of any drop in electrolyte level, add pure
distilled water. NEVER ADD ACID.
•
Battery is warranted for a period of one year only.
•
Liability under this warranty is limited to defects arising out of faulty
material or workmanship developing under proper use and NOT
when the battery is merely discharged.
CHEVROLET retailer’s
Stamp
166 Service and Warranty
SEPARATE
CORROSION PROTECTION
SERVICE
Body/ Underbody Corrosion Protection Service
General Motors India Pvt. Ltd. provides a three (3) years or
1,00,000 kms (whichever is earlier) warranty vehicle that no rustthrough of the body/underbody will occur, provided that the
directives from General Motors India Pvt. Ltd. concerning the
treatment, maintenance, and care of the vehicle (Owner’s
Manual) and especially the inspection and checks prescribed in
the service booklet have been carried out.
Furthermore, the body paintwork and the corrosion protection
must be visually inspected for damage as part of the regular
annual inspection or 15,000 kms service. The customer is
informed of any damage detected and measures to rectify this
damage. Any damage discovered is also indicated in the
following corrosion protection diagram.
Confirmation of the inspection is indicated by a stamp and dated
signature, accompanied by indication of the vehicle mileage on
the following verification documents.
Make use of this possibility in order to avoid problems during
warranty claims regarding rust- through of the body / underbody.
The rust through warranty is not applicable if areas damaged by
any reason remain unattended and become the cause of corrosion.
All repairs when required should be carried out promptly and by
the CHEVROLET retailer.
Service and Warranty 167
BODY INSPECTION RECORD
Vehicle identification number
In order to maintain the General Motors India Pvt. Ltd. rust-through warranty,
the vehicle must be subjected to an inspection by CHEVROLET retailer once
a year. Any resulting work is subject to a charge.
Registration number
Check-up 1st year after initial registration.
Name / address of owner
Check-up date
Odometer reading
Damage found
1. Outer body
Yes
No
2. Under body
Yes
No
3. Engine compartment
Yes
No
Retailer
stamp / signature
Damage repaired
Remarks :
Yes
No
168 Service and Warranty
BODY INSPECTION RECORD
Vehicle identification number
In order to maintain the General Motors India Pvt. Ltd. rust-through warranty,
the vehicle must be subjected to an inspection by CHEVROLET retailer once
a year. Any resulting work is subject to a charge.
Registration number
Check-up 2nd year after initial registration.
Name / address of owner
Check-up date
Odometer reading
Damage found
1. Outer body
Yes
No
2. Under body
Yes
No
3. Engine compartment
Yes
No
Retailer
stamp / signature
Damage repaired
Remarks :
Yes
No
Service and Warranty 169
EMISSION WARRANTY
(Applicable in NCR Delhi, Chennai,
Kolkata and Mumbai)
Subject to other terms of the warranty
policy and the conditions and obligations laid down hereunder, General
Motors India Pvt. Ltd., certifies that the
components liable to affect the emission
of the gaseous pollutants in the vehicle
in the normal use despite the use to
which it may be subjected, comply with
the provisions of Rule 115 (2) of the
central Motor Vehicle Rules, 1989,and
further warrants that if on examination
by a service center duly authorized by
the General Motors India Pvt. Ltd., the
vehicle is discovered to be failing to
meet the emission standard as specified
in the said rule, our authorized service
center shall take such corrective
measures as may be necessary and shall
at its sole discretion either repair or
replace free of charge such components
of emission control system as are
specified in Annexure II hereof.
The definitions of various terms used in
Emission warranty proposal are given in
Annexure –I. These definitions shall be
in line with the definition of the existing
product Warranty definition.
Conditions :
1. This warranty will be in addition to
and will run concurrently and
parallel to the product warranty and
will apply only in respect to
components as mentioned in
Annexure-II.
2. The period of the vehicle’s warranty
shall commence from the date of the
vehicle sale.
2.1 Warranty period - 1,00,000 kms or
3 years whichever occurs earlier,
from date of the vehicle sale.
3. The warranty claim will be accepted
only after examination carried out by
CHEVROLET retailers leading to a
firm conclusion that none of the original
settings /specifications have been
tampered with and that the components
(s) as mentioned in Annexure –II
has/have a manufacturing defect, and
/or, that the vehicle is unable to meet the
In-use emission standards.
4. The methods of examination to
determine the warrantable condition
of the components will be at sole
discretion of General Motors India
Pvt. Ltd. and or its retailers and
results of such examination will be
final and binding. If, on examination, the warrantable condition is
not established, General Motors
India Pvt. Ltd. will have the right to
charge full, or part, of the cost of
such examination and resulting
repairs /rectification
5. In case of acceptance of the warranty
under Emission Warranty, General
Motors India Pvt. Ltd. will replace,
at retailers, free of charge, the
components which are covered as
mentioned in Annexure-II, but the
consumables as mentioned in OM
shall be charged as per actual
applicable rates.
6. In case of a vehicle in which the
components covered under Emission
Warranty or the associated parts, are
not independently replaceable, on
170 Service and Warranty
account of their being integral parts
of a complete assembly, will have
the sole discretion to replace either
the entire assembly or by using some
of the parts of the system through
suitable repairs or modifications.
7. Any consequential repairs or
replacement of parts which may be
found necessary to establish
compliance to In-use emission
standards, in addition to the
replacement of the components
covered under Emission Warranty,
will not be made free of cost unless
such parts are also found to be in a
warrantable condition within the
scope and limit of the product
Warranty (Chevrolet Beat-3
years/1,00,000 kms, whichever is
earlier). The consumables and
labour shall be charged per actual
during such repairs or replacement
of parts.
8. All the parts removed for replacement under warranty will be the
property of General Motors India
Pvt. Ltd.
9. General Motors India Pvt. Ltd. will
not be responsible for the cost of
transportation of the vehicle to the
nearest retailer or any loss due to
non-availability of the vehicle
during the period of a warranty claim
and examination by CHEVROLET
retailers.
10. General Motors India Pvt. Ltd. will
not be responsible for any fines,
penalties that may be charged by
Statutory or Regulatory authorities
on account of failure of the vehicle
to comply with the in-use
emission standards on the vehicle
not meeting any such given legal/
regulatory requirement, during
inspection by such authorities.
11. Emission Warranty will be applicable
irrespective of the change of
ownership of the vehicle provided all
the conditions as laid down in this
document are met from the date of
original sale of the vehicle.
This Emission Warranty will be
applicable only if the customer :
(i) Observes all the important instructions and any other precautions listed
in the OM for use of the vehicle.
(ii) Under all circumstances uses lubricants and fuel as recommended by
General Motors India Pvt. Ltd.
(iii)Regularly obtains and carries out
maintenance at CHEVROLET
retailers as per the list in this
booklet only, in accordance with
General Motors India Pvt. Ltd.
guidelines and enters the details in
the Service Booklet.
(iv)Immediately approaches the nearest
Authorized Service Center as per
the list in this booklet upon
discovery of failure to comply with
the In-use emission standard inspite
of having maintained and used the
vehicle in accordance with the
instructions in the OM and having
carried out such repairs and
adjustments as may be required with
a view to establish such compliance.
Service and Warranty 171
(v) Produces the ‘Pollution Under
Control (PUC)’ certificate valid for
the period immediately preceding
the test during which the failure is
discovered, the test having been
carried out either for obtaining a
new certificate, or pursuant upon
being directed by an officer as
referred to in sub – rule (2) of Rule
116 of the Central Motor Vehicles
Rules.
(vi)Produces the service booklet
(Owner’s Manual) and all relevant
bills for verification of details.
(vii)Produces receipts covering maintenance of the vehicle as specified in
the OM from the date of original
purchase of the vehicle.
(viii)Produces valid certificate of
insurance & RTO registration.
Conditions under which warranty is
NOT applicable:
1. Non production/availability of a
valid ‘Pollution under Control’
certificates as described in customer
obligation (V).
2. In case the vehicle is not serviced by
CHEVROLET retailers as per the
list in this booklet as per the service
schedule described in the maintenance chart given in the Owner’s
Manual.
3. A vehicle, which has been subjected
to abnormal use, abuses, neglect and
improper maintenance or has met
with an accident.
4. Use of such replacement parts,
which are not specified and
approved by General Motors India
Pvt. Ltd.
5. If the vehicle or parts thereof, have
been altered, tampered with or
modified or replaced in an unauthorized manner.
6. A vehicle on which the odometer is
not functioning or the odometer has
been changed or the reading of
which has been changed / tampered
with so that the actual mileage
cannot be readily determined.
7. A vehicle, which has been used, for
competitions, races, rallies or for the
purpose of establishing records.
8. Examination by CHEVROLET
retailers as per the list in this booklet
of the vehicle shows that any of the
conditions stipulated in the OM
with regard to use and maintenance
have been violated.
9. A vehicle, which has been run on
adulterated fuel or lubricant or fuels
lubricants other than those,
specified by General Motors India
Pvt. Ltd.
Scope and Limits:
1. This emission warranty is in addition
to the product warranty for the
vehicle as per the scope and limit
described in the OM and all
conditions described therein will
apply, in addition to those exclusively
stipulated in this warranty.
172 Service and Warranty
2. The emission warranty covers only
compliance with the emission
standard as specified in sub rule (2)
of Rule 115 of CMVR. It does not
cover any other performance of these
parts or routine test and consequent
maintenance or adjustments to
establish compliance to the in-use
emission standard as applicable to
the state, in which the vehicle is
registered and is in use.
Service and Warranty 173
ANNEXURE-I
Definitions:
1. Vehicle : The Motor Vehicle approved for sale within India under the provisions of Central Motor Vehicle Rules, 1989 or any
subsequent amendment or substitution thereof.
2. Owner’s Manual (OM) : A document given to the customer at the time of sale of the vehicle giving guidelines on use and
maintenance of the vehicle including the terms and conditions of Warranty.
3. Maintenance : Maintenance as per the schedule provided in the Owner’s Manual by General Motors India Pvt. Ltd. including
inspection, verification check, adjustment and replacement, if necessary.
4. Service Booklet : The scheduled service record book in Owner’s Manual, which is required to be filled by CHEVROLET retailer at
the time of service.
5. Abnormal Use : The situations when the vehicle is put to use other than that intended by General Motors India Pvt. Ltd. such as
racing, overloading or use of adulterated fuel or fuel not recommended by General Motors India Pvt. Ltd.
6. Manufacturing Defect : Means deficiency or deviation from normal production tolerance in design, material, or workmanship in a
device or system which affects any parameter, performance, or component belonging to emission control system.
7. Product Warranty : The manufacturer warranty as provided by General Motors India Pvt. Ltd., which covers failure of various
parts and systems as per the Owner’s Manual 3 years/1,00,000 kms, whichever is earlier.
8. Emission Warranty : Warranty for emission performance of the vehicle as determined by sub-rule (2) of rule no 115 of the Central
Motor Vehicles Rules, 1989.
9. Authorized Service Centers : Any service facilities authorized by General Motors India Pvt. Ltd. to perform warranty repairs. This
shall include all of CHEVROLET retailers that are recognised for service of subject vehicles or any other service center duly
authorized by General Motors India Pvt. Ltd.
10. Warrantable Condition : Warrantable condition means any condition of a vehicle, which triggers the responsibility of General
Motors India Pvt. Ltd. to take corrective action within the framework of emission Warranty. This however shall not include any
statutory or regulatory fines or penalties.
11. Warranted Parts : Those components, listed as per Annexure–II.
174 Service and Warranty
ANNEXURE-II
List of Components Covered under Emission Warranty
S. No. Part name
1
Catalytic Converter***
2
Exhaust manifold gasket
3
Electronic Control Module
4
Mass Air Flow Sensor (Diesel)
5
Accelerator Pedal Position Sensor (Diesel)
6
Air Temperature Sensor
7
Coolant Temperature Sensor
8
Injectors
9
Fuel Pressure Regulator Valve (Diesel)
10
Exhaust Gas Re-circulation Valve
11
Fuel Pump
12
High Pressure Pump (Diesel)
*** Catalytic Converter is covered only for emission related failures as provided under the warranty statement. Replacements if any shall
not be applicable for breakage and noise problems.
Note : All the above mentioned parts are covered only if the car fails to meet the prescribed Emission norms. Any other performance
problems shall be treated as not relevant to the Emission warranty.
24x7 Roadside Assistance 175
24x7 ROADSIDE
ASSISTANCE
How to request assistance ............ 176
Benefits ........................................ 177
Covered area ................................ 177
Chevrolet Roadside Assistance at
home or on the road ..................... 177
Vehicle recovery following
mechanical or electrical
breakdown .................................... 177
Vehicle recovery following an
accident ........................................ 178
Taxi benefit .................................. 178
Urgent message relay ................... 178
Locked keys/lost key .................... 178
Non covered events under the
Chevrolet Roadside Assistance
program ........................................ 178
Special exclusions ........................ 180
Adverse weather ........................... 180
Force majeure ............................... 181
External factors ............................ 181
Right of refusal ............................ 181
Disputes ........................................ 181
Summary ...................................... 181
Disclaimer .................................... 182
24x7x365 Days Access Fuel Assistance
to Toll Free Number
Key Lockout
Services
Taxi Assistance
Towing Facility
Tyre Assistance
Battery Jump Start
176 24x7 Roadside Assistance
The Chevrolet Roadside Assistance Program is focused to enhance your overall Chevrolet ownership experience by providing 24x7
Roadside Assistance emergency support for a period of three years starting from the date of invoice of the Chevrolet vehicle sold from an
authorized CHEVROLET retailer, in the unfortunate event of vehicle breakdown or accident of your Chevrolet vehicle. The Chevrolet
Roadside Assistance Program has specially been designed to take care of your car’s safety and your comfort. The Benefits and the Terms
& Conditions of the Chevrolet Roadside Assistance Program are mentioned in this Owner’s Manual. You are therefore, requested to read
this Owner’s Manual very carefully.
HOW TO REQUEST ASSISTANCE
In the event of a breakdown or accident, simply call the Chevrolet 24x7 Roadside Assistance Program on Toll Free Number*
1800 103 8090. (*In case of difficulty in reaching this toll-free number from your phone network, please dial 0124-4388090. Call
charges apply.)
Please have the following information in hand when you call for assistance:
1.
2.
3.
4.
5.
6.
7.
8.
Your name and contact phone number.
Vehicle registration number.
Vehicle identification number (VIN) mentioned in the vehicle registration certificate.
Vehicle model.
Date of invoice.
Name of the authorized retailer from whom Chevrolet vehicle was purchased.
Brief description of the problem faced.
Specific location of the vehicle along with the nearest landmark.
The Chevrolet Roadside Assistance Program is available only if the above mentioned dial-in numbers are contacted.
REMARKS
1. Once you have called Chevrolet Roadside Assistance Program, it is advisable that you stay with your vehicle.
2. Park your vehicle on the edge of the road and put the hazard warning lights on.
3. If you are on a highway, place the warning triangle provided with the Chevrolet vehicle approximately 3 meters from the vehicle in
the direction of the on-coming traffic.
24x7 Roadside Assistance 177
BENEFITS
Chevrolet Roadside Assistance Program can be availed when your vehicle is immobilized due to:
1. Mechanical or electrical breakdown.
2. Road traffic accident where the vehicle is immobilized.
3. Human error.
4. Battery problems: Dead battery.
5. Fuel problems: Out of fuel, incorrect fuel or contaminated fuel.
6. Key problems: Locked keys, lost keys or broken vehicle keys.
7. Tyre problems: Puncture – replace with spare tyre available in the vehicle, bolts or valve related issues.
COVERED AREA
Customers are entitled to the Benefits provided under this Chevrolet Roadside Assistance Program on a PAN India level (only exception
in coverage is Andaman Nicobar Islands, where this Chevrolet Roadside Assistance Program is currently not available), provided
however the Chevrolet vehicle has broken down on gazette, bitumen/concrete road. Chevrolet Roadside Assistance Program will also be
provided to a customer when at home, on the roadside, on the highway, in a parking lot, etc., but if you are already at an authorized
CHEVROLET retailer, then you are not entitled to the Benefits under the Chevrolet Roadside Assistance Program.
CHEVROLET ROADSIDE ASSISTANCE AT HOME OR ON THE ROAD
If your Chevrolet vehicle is immobilized whether at home or on the road, Chevrolet Roadside Assistance Program personnel will attend
to your Chevrolet vehicle. If the problem is something that can be resolved at the roadside, a mobile technician will be sent to mobilize
your vehicle at the roadside.
VEHICLE RECOVERY FOLLOWING MECHANICAL OR ELECTRICAL BREAKDOWN
If your Chevrolet vehicle is unable to be mobilized following a mechanical or electrical breakdown, a recovery vehicle will be sent to
recover your Chevrolet vehicle to the nearest authorized CHEVROLET retailer.
178 24x7 Roadside Assistance
VEHICLE RECOVERY FOLLOWING AN ACCIDENT
If your Chevrolet vehicle is unable to be mobilized following a road traffic accident, Chevrolet Roadside Assistance Program personnel
will organize to send a recovery vehicle to recover your Chevrolet vehicle to the nearest authorized CHEVROLET retailer, however all
the costs towards repairs will be borne exclusively by you.
TAXI BENEFIT
If your Chevrolet vehicle is recovered to an authorized CHEVROLET retailer by Chevrolet Roadside Assistance Program personnel, the
driver and passengers, if any, of the Chevrolet vehicle will be provided with one free taxi ride, up to 50 kms from the breakdown location,
in order to continue your journey. The maximum number of persons that can avail this facility would, at no point of time, exceed the
number of people including the driver, Chevrolet vehicle is permissible to carry under the applicable rules and regulations.
URGENT MESSAGE RELAY
You will be provided an urgent message relay service to help keep in contact with family, friends and/or work colleagues in the event of a
vehicle breakdown or accident.
LOCKED KEYS/LOST KEY
Whilst we will always endeavor to provide assistance by the most efficient method, however, modern security systems sometimes make
it extremely difficult for us to gain entry to your vehicle at the roadside should the spare keys not be available. If a forced emergency entry
is required, you will be asked to provide the approval granting the Chevrolet Roadside Assistance Program personnel the requisite
permission to gain this access and further confirm that all repair costs relating to any resulting damages to your vehicle will be your sole
responsibility and borne by you or customer’s car may be towed to nearest authorized CHEVROLET retailer. In the event of lost key,
provision of retrieving spare key from home will be provided only, if the event has occurred in the city you are residing.
NON COVERED EVENTS UNDER THE CHEVROLET ROADSIDE ASSISTANCE PROGRAM
Chevrolet Roadside Assistance Program is designed to help in events that lead to stoppage / immobilization of your vehicle. As a result,
this program will not cover any of the following events that you may encounter while driving your vehicle:
24x7 Roadside Assistance 179
1. Faulty fuel gauge.
2. Speedometer not working.
3. Air-conditioning not working.
4. When the passenger door (s) cannot be opened and there are no passengers in the vehicle.
5. Boot cannot be opened.
6. The front and/or rear demisters are not functioning.
7. Horn is not functioning. However, if the horn is sounding continuously, the Chevrolet Roadside Assistance Services will be provided.
8. Damaged door mirrors.
9. When the rear view mirror is damaged but it does not obstruct the driver’s vision.
10. Damaged or faulty fuel cap but vehicle has not run out of fuel and there is enough fuel in the tank to enable the vehicle to reach the
nearest authorized CHEVROLET retailer.
11. When the sunroof cannot be opened.
12. When the sunroof cannot be closed but weather conditions are fair and the vehicle is not exposed to any security risk.
13. When the windows cannot be opened.
14. When the windows cannot be closed but weather conditions are fair and the vehicle is not exposed to any security risk.
15. Seat adjustor is faulty but the vehicle can be safely driven.
16. When the passenger seat belts are faulty but there are no passengers in the vehicle.
17. Faulty security system unless the vehicle is immobilized or unless the alarm is sounding continuously.
18. Transmission stuck in sports/winter mode.
19. When the ABS lights are illuminated.
20. Air bag warning lights are illuminated.
21. Traction control lights are illuminated.
22. Other non-safety related lights/service warnings are illuminated.
23. When your vehicle runs out of windscreen wiper fluid.
24. Front windscreen wipers faulty but weather conditions are fair.
25. Rear windscreen wiper faulty.
26. Vehicle pick-up and drop for routine maintenance is not included.
180 24x7 Roadside Assistance
SPECIAL EXCLUSIONS
The following scenarios are special exclusions under the Chevrolet Roadside Assistance Program, and therefore neither CSIPL nor its
authorized retailers will be responsible for any assistance/repair costs and are excluded from Chevrolet Roadside Assistance Program:
1. Vehicle is involved in motor racing, rallies, speed or endurance tests, practice runs or operated outside official roads.
2. Assistance is required as a result of wars, riots, uprising, mass political demonstrations, pillage, strike, use for military purposes or
acts of terrorism, earthquake damage, freak weather conditions, atmospheric phenomena, nuclear transformation phenomena or
radiation caused by artificial acceleration of atomic particles.
3. Breakdown is caused by deliberate damage, vandalism or participation in a criminal act or offence.
4. The immobilization is resulting from damage caused by intervention of the police or other authorities.
5. Any damage resulting from the use of the vehicle against the recommendations of the Owner’s Manual.
6. Any consequential costs and/or damage to property as a result of a breakdown in or on the vehicle.
7. Any cost as a result of damage and or claim caused while the driver was operating the vehicle under the influence of alcohol, solvent
abuse, drugs or other illegal substance.
8. Vehicles kept in a non-roadworthy condition or not serviced in accordance with the manufacturer’s recommendations and any such
other events that may be decided by CSIPL from time to time.
ADVERSE WEATHER
On occasion of adverse weather conditions such as floods, heavy rain, thunder, lightening or other external factors, which may affect our
ability to provide the services effectively and it may become physically impossible to assist you until the weather improves. During such
time, our main priority will be to provide the necessary assistance to you and the passengers to be taken to a place of safety. The recovery
of your vehicle may not be possible until the weather condition permits.
24x7 Roadside Assistance 181
FORCE MAJEURE
CSIPL shall not be liable for its inability to provide the services under the terms of service set out in this Owner’s Manual if such inability
to provide the services is caused or contributed by causes beyond CSIPL’s reasonable control including but not limited to acts of god, acts
of public enemy or statutory authorities or courts, terrorism, or any acts of any person engaged in subversive activity or sabotage, strikes,
embargoes, public rallies and protests.
EXTERNAL FACTORS
You agree and understand that though Chevrolet Roadside Assistance Program will make every effort to reach you once you have made
the call and the call is registered however, external conditions including traffic could delay such an effort.
RIGHT OF REFUSAL
Chevrolet Roadside Assistance Program shall have the right to refuse any or all benefits under the program, if it is found that the
information furnished by you at the time of making the request for assistance are false.
DISPUTES
All disputes arising out of this Roadside Assistance Program shall be submitted to a sole arbitrator to be appointed by CSIPL and the
place of arbitration shall be CSIPL Office at Gurgaon, Haryana. The arbitration proceedings shall be governed by the Arbitration and
Conciliation Act, 1996 and shall be conducted in English. The Courts of Delhi shall have the jurisdiction.
SUMMARY
AFTER READING THIS OWNER’S MANUAL, YOU SHOULD UNDERSTAND:
1. The scope of Chevrolet Roadside Assistance Program.
2. You should at all times retain the Owner’s Manual and produce whenever required.
3. This Owner’s Manual must remain with the Chevrolet vehicle, if the vehicle is resold.
If you have any questions, your authorized CHEVROLET retailer / Chevrolet Roadside Assistance will be happy to assist you.
182 24x7 Roadside Assistance
DISCLAIMER
CSIPL shall be under no liability whatsoever in respect of any
loss or damages arising directly or indirectly due to any delay or
non-delivery of the services under the CSIPL Roadside
Assistance Program. In case the vehicle cannot be mobilized onsite, Customers are advised to use the towing facility as may be
arranged by CSIPL Roadside Assistance Program Vendor
personnel for taking the vehicle to the nearest authorized
workshop. In no condition, shall the vehicle be towed to any
unauthorized workshop. Customer agrees, that it shall be a
condition precedent that the Customers remove their personal
belongings like laptops, wallets, mobile phone and other such
valuable items before allowing the Roadside Assistance Vendor
personnel to tow the vehicle and also take an inventory list of
other belongings inside the vehicle including, the current
physical conditions of the vehicle like dents, scratches, tools and
spare tyre and to verify the list before taking possession of the
vehicle from the authorized workshop. CSIPL at its discretion
may refuse to render these services to any such Customers who in
the reasonable discretion of CSIPL is misrepresenting the facts,
in relation to the vehicle or any other details sought by the
Roadside Assistance call center or the personnel and/or in the
event of unruly, rude, use of abusive and foul languages, physical
abuse and such other similar behavior to the Roadside Assistance
Vendor’s personnel by the Customer or the occupant of the
vehicle. CSIPL reserves the right to change or modify any of the
services and the charges thereto that are rendered in this Roadside
Assistance Program without any notice.
24x7
ROADSIDE
ASSISTANCE
1800-103-8090
(Toll Free No.)
0124-4388090
Service Network 183
SERVICE NETWORK
CHEVROLET SALES INDIA
SALES AND SERVICE NETWORK
North zone .....................................184
West zone ......................................189
South zone......................................194
East zone ...................................... 199
International ................................. 202
L
m
Indicates Retailer (Sales and Service)
Indicates Chevrolet Authorized Service Center
Authorized Service Center (ASC) are authorized to carry out Periodic Maintenance (Free/Paid, Minor Running Repair) Only.
The list of authorized Retailers / ASC are mentioned herein as of August, 2014. For any change in authorized Retailers /ASC, please visit
www.chevrolet.co.in.
184 Service Network
NORTH ZONE
L
STATE - DELHI
L
L
Auto Vikas Sales & Service Pvt. Ltd.
Workshop :
12-A, Shivaji Marg, Najafgarh Road,
New Delhi - 110 015
Tel. : 011 - 42070707, 42070788
Fax : 011 - 25451004, 42070735
L
L
L
Go Auto Pvt. Ltd.
Showroom :
A 231, Okhla Industrial Area, Phase-1,
New Delhi - 110 020
Tel. : 011 - 41855500, 9015444555
Workshop :
B-25, Okhla Industrial Area, Phase-1,
New Delhi - 110 020
Tel. : 011 - 41955500, 9015777888
L
Metro Motors Pvt. Ltd.
Showroom & Workshop :
Bawa Potteries Industrial Complex,
Aruna Asaf Ali Marg, Vasant Kunj - 110 070
Tel. : 011 - 41761717, 46156666
L
L
L
Sparsh Autotech Pvt. Ltd.
Showroom :
D-12 &13, Rajapuri, Madhuvihar, Opp. Sector-5,
Dwarka, New Delhi -110075
Tel.: 011- 49115911
L
Workshop :
32/8, Shanti Garden, Matiala Industrial Area,
Near DPS School, Dwarka, New Delhi -110059
Tel.: 011- 49116911
L
Triumph Motors
Showroom :
A-9/3 Wazirpur Industrial Area, Near Richi Rich,
New Delhi - 110 052
Tel. : 011 - 47444666
Fax : 011 - 42475584
BHIWANI
Shailesh Automobiles
Showroom & Workshop :
Rohtak Road, Bhiwani - 127021
Tel. : 01664 -204006/008
DADRI
Shailesh Automobiles
Showroom & Workshop :
Near Loharu Chowk, Bhiwani Road, Dadri - 127 306
Tel. : 9253660069/70
FARIDABAD
Regent Automobiles Ltd.
Showroom :
14/3 , Mathura Road, Faridabad - 121 003, Haryana
Tel. : 0129 - 4088530 / 31
Fax : 0129 - 2252304
Workshop 1 :
14/5, Main Mathura Road, Faridabad - 121 003
Tel. : 0129 - 2252151 - 55, 4261200
Workshop 2 :
Plot No.57, Sector-27C, Opp. Crown Interiorz Mall,
13/1, Mathura Road, Faridabad - 121 003
Tel.: 0129 - 2577777
Workshop 1:
C-13, Plot No. 65, SMA Industrial Area, GTK Road,
Opp. Jahangir Puri, Azadpur, New Delhi - 110 033
Tel. : 011 - 47444777
L
Workshop 2 :
G-14, Udyog Nagar, Rohtak Road, Peeragarhi,
Delhi - 110 041
Tel. : 011 - 42010101
Fax : 011 - 42010132
AMBALA
Ambala Automobiles India Ltd.
Showroom :
Ramgarh, Near Central Jail Bridge, Chandigarh Road,
Baldev Nagar, Ambala City - 134 003
Tel. : 0171 - 2543010
Fax : 0171 - 2543510
Workshop :
Barwala, Naraingarh Road, Ambala City - 134 003
Tel.: 0171 - 2678013
Showroom 2 :
A-2/6, Safdarganj Enclave,
Africa Avenue, New Delhi - 110 029
Tel. : 011 - 46146666 / 75
Arya Automobiles
Showroom :
Plot No. 193, Metro Pillar No. 543,
Main Rohtak Road, Mundka, New Delhi - 110 041
Tel. : 011 - 8743030301 / 302
Fax : 011 - 28342887
Workshop :
KH-82/21/2 &22/2, Phirni Road, Udyog Nagar
Industrial Area, Near Mundka Metro Pillar No. 547,
New Delhi - 110 041
Tel. : 011 - 28342884
STATE - HARYANA
Workshop :
B-31, Jhilmil Industrial Area, Behind Jhilmil Metro
Station, New Delhi - 110095
Tel. : 011 - 43388888
Ganganagar Automobiles Pvt. Ltd.
(Aarav Chevrolet)
Showroom :
11 - A, Shivaji Marg, Moti Nagar,
Opp. L & T Building, New Delhi - 110 015
Tel. : 011 - 41238888
Workshop:
56, Rama Road, Opposite Radha Palace Banquet Hall,
New Delhi -110 015
Tel. : 011 - 49258888, 8826292810, 8826292815
Globus Motocorp Pvt. Ltd.
Showroom :
ZB-43 & 44/487, Zulphe Bengal, Main GT Road,
Dilshad Garden, Delhi - 110095
Tel. : 011 - 43355555
GURGAON
Bhanu Motors Pvt. Ltd.
Showroom:
Shop No. 4, Omaxe Wedding Mall, Main Sohna Road,
Near Subhash Chowk, Gurgaon - 122001
Tel. : 0124 - 4757777
Service Network 185
Workshop:
Plot No. 541, Sector-37, Part-II, Gurgaon - 122001
Tel. : 0124 - 4598888
L
m
L
L
L
L
L
Gentech Toolings Pvt. Ltd.
Showroom & Workshop :
Plot No. 66, IDC, Opp. Sector - 14
Mehrauli - Gurgaon Road, Gurgaon - 122 001
Tel. : 0124 - 4638751 - 54, 4368787
Fax : 0124 - 4638700
Orix Auto Infrastructure Services Ltd.
Workshop :
7B, Sector - 18, Maruti Industrial Area,
Gurgaon - 122 015
Tel. : 0124 - 3014700 / 701 / 719
Fax : 0124 - 3014702
YAMUNA NAGAR
Oberoi Automobiles
Showroom & Workshop :
Aggarsain Chowk, Near Gupta Palace,
Jagadhri - 135 003
Tel. : 01732 - 212030, 212010
KURUKSHETRA
VPS Speciality Papers
Showroom & Workshop :
Plot No.145 &146, Industrial Area, Sector 2,
Kurukshetra - 136 118
Telefax : 01744 - 231050
HISSAR
Ashwani Automotors
Showroom & Workshop :
9 km Stone, OP Jindal Marg, Hissar - 125 044
Tel. : 01662 - 220710 / 11 / 12
JHAJJAR
Shailesh Automobiles
Showroom & Workshop :
Tehsil Road Jhajjar, Haryana - 124 001
Tel. : 9253660066 / 9254171300
JIND
Lekh Raj Motors Pvt. Ltd
Showroom & Workshop:
Safidon Road, opp. Brahmin Dharamsala, Jind.
Tel. : 9992900082
L
L
L
L
L
L
L
KAITHAL
Lekh Raj Motors Pvt. Ltd.
Showroom & Workshop :
Ambala Road, Kaithal, Haryana - 136 027
Tel. : 0174 - 6226827
KARNAL
Aryaman Automobiles
Showroom & Workshop :
117/6, K.M. Milestone, Near Hotel New
World, G. T. Road, Karnal - 132 001
Tel. : 0184 - 2220011, 2220325
TeleFax : 0184 - 2220025
PANIPAT
Aryaman Motors
Showroom & Workshop :
Plot No 64, Sector -25, Huda Industrial Area Phase 1,
Panipat - 132 103
Tel. : 0180 - 2666222 / 2666800
STATE - HIMACHAL PRADESH
L
L
L
ROHTAK
Badhwar Automobiles Pvt. Ltd.
Showroom & Workshop :
Sonepat Road, Rohtak - 124 001
Telefax : 01262 - 256666
L
REWARI
Vardhman Automobiles Pvt. Ltd.
Showroom & Workshop :
Opp. Gurudwara, Jhajhar Road, Rewari - 123 401
Tel. : 01274 - 250440 / 251188
Fax : 01274 - 255966
L
SONIPAT
Malwa Motors Sales Pvt. Ltd.
Showroom & Workshop :
NH-1, 31 Km Stone, G.T. Road, Kundli,
Sonipat - 131 001, Haryana
Tel. : 0130 - 2219384 - 85, 2370386, 2371386
Fax : 0130 - 2219384
SIRSA
Padam Motors Pvt. Ltd.
Showroom & Workshop :
Hisar Road, Opp Traffic Police Post, Sirsa - 125 055
Tel. : 01666 - 244445
Fax : 01666 - 244442
L
KANGRA
Himachal Autowheels Pvt. Ltd.
(Platinum Chevrolet)
Showroom & Workshop :
N.H 20 Kachhiary, Kangra - 176 001
Tel. : 01892 - 260600/260601
MANDI
Ram Hari Motors Pvt. Ltd.
Showroom & Workshop :
Rani Ki Bain, Gutkar, Mandi - 175 021
Tel. : 01905 - 225692
Fax : 01905 - 221691
MANALI
Ram Hari Motors Pvt. Ltd.
Showroom & Workshop :
Rotang Road, Village Vishisht Vihal, PO Vashisht,
Tehsil - Manali, Distt - Kullu, Manali - 175 131
Tel. : 01902 - 254001
SIMLA
Rajvir Motors
Showroom & Workshop :
Byepass Road, Parasdass Garden, Simla - 171 001
Tel. : 0177 - 2674284 - 6
Fax : 0177 - 2674287
SOLAN
Rajvir Motors
Showroom & Workshop :
Kalka Shimla Road, Near Mehta Market,
Kumarhatti, Solan, Himachal Pradesh - 173 229
Telefax : 01792 - 266338
UNA
Bhagat Ram Motorways Pvt. Ltd.
Showroom & Workshop :
Una Nangal Road, Rakkar Colony, Una - 174 303
Tel. : 01975 - 238799
Fax : 01975 - 238699
STATE - PUNJAB
L
AMRITSAR
S V Motors
Showroom :
Near Amritsar Gate, GT Road, Amritsar - 143 001
Tel. : 0183 - 2700102
Fax : 0183 - 2700101
186 Service Network
Workshop :
Main GT Road, Opp. ITBP Office, Amritsar - 143 001
Tel. : 0183 - 2700201
L
L
L
L
BATALA
Kashmir Autmobiles Pvt. Ltd. (Platinum Chevrolet)
Showroom & Workshop:
Opp. Cambridge International School, Saidmubarak,
Amritsar Road, Batala - 143 505
Tel.: 01871 - 241024
BHATINDA
Padam Cars Pvt. Ltd.
Showroom & Workshop :
Goniana Road, 8th Mile Stone, NH-10,
Bhatinda - 151 005
Tel. : 0164 - 27601111 / 9216350205
Telefax : 0164 - 2760153
CHANDIGARH
Padam Motors Pvt. Ltd.
Showroom:
182/2, Industrial Area, Phase 1, Chandigarh - 160 002
Tel. : 0172 - 5212900
L
L
L
L
Workshop :
185, Industrial Area, Phase 1, Chandigarh -160 002
Tel. : 0172 - 5212999
L
JALANDHAR
Aakriti World
Showroom :
Ground Floor, Vasal Tower, Police Lines,
Opp. President Hotel, Jalandhar - 144 001
Telefax : 0181 - 5003333
L
Workshop :
1746 Ladowali Road, Near BSF Chowk,
Jalandhar - 144 001
Tel. : 0181 - 5057777
L
LUDHIANA
Padam Cars Pvt. Ltd.
Showroom & Workshop :
Khasra No. 279/3, G.T. Road,
Dhandari Kalan, Ludhiana
Tel. : 0161 - 2510014
Telefax : 0161 - 2510015
L
L
Padam Motors Pvt. Ltd.
Showroom & Workshop :
Near Ayalli Chowk, Ferozepur Road,
Ludhiana - 141 001
Tel. : 0163-6225755, 9780000609
STATE - RAJASTHAN
L
Omni Wheels Pvt. Ltd.
Showroom & Workshop :
Plot No 73, New Kuldeep Nagar,
Basti Jodhewal Chowk, Ludhiana - 141 007
Tel. : 0161 - 5055900
Fax : 0161 - 5055911
ROPAR
Padam Cars Pvt. Ltd.
Showroom & Workshop :
Chandigarh Road, Nangal Chowk, Ropar - 140 001
Telefax : 01881 - 500099
MOGA
Padam Cars Pvt. Ltd.
Showroom & Workshop :
Near Majestic Resorts, Ferozepur Road,
Moga - 142 001
Tel. : 01636 - 225755
NAWASHAHAR
Aakriti World
Showroom & Workshop :
Chandigarh Road, Nawashahar, Punjab - 144 514
Tel. : 01823 - 285656
Telefax : 01823 - 285858
PATIALA
Padam Cars Pvt. Ltd.
Showroom & Workshop :
Main Patiala - Rajpura Road,
Opp. Caspa Resort, Bahadurgarh, Patiala - 147 001
Tel. : 0175 - 2663813 - 14, 9217100905 - 9
Fax : 0175 - 2663828
PATHANKOT
Kashmir Automobiles Pvt. Ltd.
Showroom & Workshop :
Simbel Chowk, Dalhousie Road, Pathankot - 145 001
Tel. : 0186 - 2257022 - 24
SANGRUR
Padam Cars Pvt. Ltd.
Showroom & Workshop :
College Road, Opp. Kamal Palace, Sangrur - 148001
Tel. : 9216350134, 9216911461
AJMER
Rajdeep Autowheels (P) Ltd.
Showroom :
12-15, ASC Road, Vaishali Nagar, Ajmer - 305001
Tel. : 0145 - 2628989 / 2625116
Workshop :
Khasara No-319 Kankarda Bhunaboy, NH-8,
Jaipur Road, Ajmer - 305001
Tel. : 0145 - 2788192 / 93 / 2788222 / 23
L
L
L
L
L
ALWAR
Triumph Motors
Showroom & Workshop :
Old Delhi Road, Near Jhankar Hotel, Alwar - 301 001
Telefax : 0144 - 3047571 - 78
BHILWARA
Rajdeep Autowheels (P) Ltd.
Showroom & Workshop :
Payal Resort, Ajmer Road, Bhilwara - 311001
Tel. : 01482 - 265164
BIKANER
Sunehri Cars
Showroom & Workshop :
Plot No. 15, Transport Nagar,
NH-15, Ganganagar Road, Bikaner - 334 001
Tel. : 8003399060 / 66 / 69
BANSWARA
Atharva Motors Pvt. Ltd.
Workshop :
Janamedi, Udaipur Road, Banswara - 327 001
Tel. : 02962 - 250227
CHITTORGARH
Atharva Motors Pvt. Ltd.
Showroom :
Plot No. 86, Kabir Colony, Bhilwara Road,
Chittorgarh - 312001
Tel. : 01472 - 247598
Fax : 01472 - 247598
Workshop :
Near Saint Paul's School, Opp. Rajasthan State
Seed Corp., Nimbhera Road, Chittorgarh - 312 001
Tel. : 01472 - 240598
Service Network 187
L
L
CHOMU
Triumph Motors
Showroom & Workshop :
Near Radha Soami Bagh, Jaipur Road,
Chomu - 303 702
Tel. : 0142 - 3304000
JAIPUR
Triumph Motors
Showroom 1 :
Corporate Tower, A-1, Jawahar Lal Marg,
Jaipur - 302 015
Tel. : 0141 - 4057575
Fax : 0141 - 4057500
Showroom 2 :
C7D, Sawai Jai Singh Highway,
Bani Park, Jaipur - 302 016
Tel. : 0141 - 4122222
Fax : 0141 - 4122233
Workshop :
E-711, Mia Bsni, IInd Phase,
Behind Krishna Dharam Kanta, Jodhpur - 342 005
Tel. : 0291 - 3048217 - 22
Fax : 0291 - 3048223
L
L
L
Workshop 1 :
G-109A, Sitapura Industrial Area, Jaipur - 302 004
Tel. : 0141 - 5122333, 5113636, 5143737,
5122797, 5122798, 5143636, 4090409
Fax : 0141 - 5122552
Workshop 2 :
E-12B, Vishwakarma Ind. Area, Road No. 01,
Jaipur - 302 013
Tel. : 0141 - 4255555
Workshop 3 :
E1 - 2295, Ramchandrapura Industrial Area,
Sitapura Ext, Jaipur - 302 022
Tel. : 0141 - 4090409
L
L
JHUNJUNU
Triumph Motors
Showroom & Workshop :
G1-8, 9 & H1-16,17, Phase - 2, RIICO Industrial Area,
Jhunjhunu - 333 001
Tel. : 01592 - 203163, 250001 - 3, 250145, 250146
JODHPUR
Atharva Motors Pvt. Ltd.
Showroom :
27/27A, Light Industrial Area,
Near Shastri Circle, ITI Road, Jodhpur - 342 003
Tel. : 0291 - 3048491
L
L
KOTA
Triumph Motors
Showroom & Workshop :
E - 137C, Road No. 5,
Indraprastha Industrial Area, Kota
Tel. : 0744 - 2372333, 2372666
PALI
Atharva Motors Pvt. Ltd.
Showroom & Workshop :
Opp. Krishi Mandi, Jodhpur Road, Pali - 306 401
Tel. : 9414060104
SIKAR
Triumph Motors
Showroom & Workshop :
Near Circuit House, NH-11, Jaipur Sikar Road,
Sikar - 332 001
Tel. : 01572 - 245971
SRI GANGANAGAR
Sunehri Cars
Showroom & Workshop :
6th Km Stone, Surat Garh Road, NH-15,
Sri Ganganagar
Tel. : 8003399070 / 71
UDAIPUR
Atharva Motors Pvt. Ltd.
Showroom & Workshop :
A-83, Mewar Industrial Area, Madri, NH-8,
Ahmedabad Bye Pass, Udaipur - 313 002
Tel. : 0294 - 3002730, 3002769
Fax : 0294 - 2490108
STATE - UTTAR PRADESH
L
L
ALIGARH
Jattari Automobile
Showroom & Workshop :
300 Mtr. From, Bharat Petrol Pump,
Khair By Pass Road, Aligarh - 202001
Tel. : 8938802229, 8938802214
ALLAHABAD
Eldee Motors
Showroom :
Eldee Enclave, 2, S. P. Marg, Civil Lines,
Allahabad - 211 001
Tel. : 0532 - 2560743, 44
Workshop :
Kanodia Mill Compound 1, Luker Ganj,
Allahabad - 211 001
Tel. : 0532 - 2616368
L
L
L
L
AGRA
Kalyan Auto Sales
Showroom & Workshop :
Opp. Bhagwati Dhaba, Near New Sabji Mandi,
Sikandra, Agra - 282 007
Tel. : 0562 - 2640460 / 62 / 63
Fax : 0562 - 2640461
BAREILLY
VAT Motors Pvt. Ltd.
Showroom & Workshop :
4.5 KM, Rampur Road, CB Ganj, Bareilly - 243 001
Tel. : 0581 - 2560741
Fax : 0581 - 2560731
FAIZABAD
Megha Auto (I) Pvt. Ltd.
Showroom & Workshop :
Lucknow Byepass Road, Sahadatganj,
Faizabad - 224 001
Tel. : 09839099210
GORAKHPUR
United Motors
Showroom :
Kasia By-pass Road, Near Dr. Riyaz Ortho Hospital,
Mohaddipur, Gorakhpur - 273 001
Tel.: 0551 - 2201667
Fax.: 0551 - 2338299
Workshop :
Saryu Nahar Colony, Singharia,
Gorakhpur - Deoria Road, Gorakhpur - 273 008
Tel.: 0551 - 2270231
188 Service Network
L
GHAZIABAD
Shiva Motors
Showroom & Workshop :
28/3/5, Site - IV, Industrial Area, Sahibabad,
Ghaziabad
Tel.: 0120 - 3008600 / 605 / 631 / 632 / 635 / 636
Fax: 0120 - 3008643 / 45 / 48 / 49 / 50
Workshop 2:
Mishipur Depot, Near Sanatan Cold
Storage, Kursi Road, Lucknow - 226 026
Tel. : 0522 - 2890631
L
Workshop 2 :
58/3, Site 04, Sahibabad, Ghaziabad - 200 300
Tel. : 0120 - 4558765
L
L
JHANSI
Sri Venkateshwar Autocare Pvt. Ltd.
Showroom & Workshop :
Jhansi Kanpur Road, Goramachhiya, Jhansi - 284 001
Tel. : 0510 - 2371144, 6450158
KANPUR
Cross Road Auto Pvt. Ltd.
Showroom :
40, Government Industrial Estate,
Opp. Sindhi Colony, Fazal Ganj, Kanpur - 208 012
Tel.: 0512 - 2221276 / 2220043
Workshop 1 :
C-15A, Panki Industrial Area, Site-1, Kanpur - 208 012
Tel.: 0512 - 2691293, 2691377
Workshop 2 :
122/236, A-1 & C-1, Fazalganj,
Near Sangam Talkies, Kanpur - 208 012
Tel.: 8009461111
L
L
L
L
Romi Motors Pvt. Ltd.
Showroom :
14/63, Civil Lines, Kanpur - 208 001
Tel.: 0512 - 3224703
Workshop :
120/192 (4), Lajpat Nagar,
Near Mariampur Crossing, Kanpur - 208 012
Tel. : 0512 - 3224701 / 3224702
L
L
LUCKNOW
Megha Auto (I) Pvt. Ltd.
Showroom & Workshop :
10/CP/5, Ring Road, Vikasnagar,
Opp. Jagrani Hospital, Lucknow - 226 020
Tel. : 0522 - 4057999 / 4007977 / 2330180
MATHURA
Kalyan Auto Sales
Showroom :
NH-2, Agra-Matura Road, Mathura
Tel. : 9927000967
MEERUT
Vardajyoti Automobiles Pvt. Ltd.
Showroom & Workshop :
Madhuban Cinema Bldg., Madhuban Colony,
Baghpath Road, Meerut - 250 002
Tel. : 0121 - 2404005 - 08
Fax : 0121 - 2404009
L
L
NOIDA
Shiva Motors
Showroom :
G-24, Sector 11, Noida - 210 301
Tel. : 0120 - 3920150 / 158
L
L
SAHARANPUR
DPM Autosales
Workshop :
Ambala Road, Near Badi Nahar, Saharanpur
Tel. : 0135 - 2640877
DEHRADUN
DPM Autosales
Showroom & Workshop :
Mohabewala Industrial Area,
Saharanpur Road, Dehradun
Tel. : 0135 - 2642051 / 52 / 53
Fax : 0135 - 2642054
HALDWANI
Analysis Motors
Workshop :
7.5 km Stone, Gora Padav, Bareilly Road,
Haldwani - 263 641
Tel. : 05946 - 232050
STATE - JAMMU & KASHMIR
L
Workshop :
C-80/81A, Sector - 8, Noida
Tel. : 0120 - 3359807 / 813
L
VARANASI
Vinayak Automotive Pvt. Ltd. (Vinayak Chevrolet)
Showroom & Workshop :
Adjacent to Essar Petrol Pump,
Jagatpur, Rohania, Varanasi - 221 313
Tel. : 7703003320, 7703003330, 7703003321,
7703003333
STATE - UTTARAKHAND
MORADABAD
Siggma Motors Pvt. Ltd.
Showroom & Workshop :
Near Radhakrishna Mandir,
Delhi Road, Moradabad - 244 001
Tel. : 0591 - 2550100 - 05, 7351007701 - 05, 7351003805
MIRZAPUR
Saraswati Industries
Showroom & Workshop :
Pili Kothi, Station Road, Mirzapur - 231 001
Tel. : 05442 - 223923
SHAHJAHANPUR
VAT Motors Pvt. Ltd.,
Showroom & Workshop :
Axis Chevrolet, 4.5 Km, Bareilly Road, Mauzampur,
Shahjahanpur - 242 001
Tel. : 8795030111
L
L
JAMMU
K. C. Motors
Showroom & Workshop :
NH-1, Byepass Road, Jammu - 180 004
Tel. : 0191 - 2465769 / 59, 2460829
Fax : 0191 - 2476660
RS PURA
K. C. Motors
Showroom & Workshop :
Bagha Marh, RS Pura, Jammu
Tel. : 01923 - 252809
Fax : 01923 - 252809
SRINAGAR
K. C. Motors
Showroom & Workshop :
By Pass Road, Hyderpora, Srinagar - 190 014
Tel. : 0194 - 2443188
Service Network 189
WEST ZONE
L
STATE - GOA
L
VASCO-DA-GAMA
Subrai Motors Pvt. Ltd.
Showroom & Workshop :
F L Gomes Road, Vasco-Da-Gama, Goa - 403 802
Tel. : 0832 - 2517421 / 22
Fax : 0832 - 2513924
L
STATE - GUJARAT
L
AHMEDABAD
Gallops Motors Pvt. Ltd.
Showroom & Workshop :
Near JCB Service Station, S.G. Highway,
Sarkhej, Ahmedabad - 380 015
Tel. : 079 - 2474346, 39835544, 39835501
Fax : 079 - 39835588
Showroom 2 :
A/8,9,10,11,12,13 & 14, Radhe Shopping Mall,
Khokhra, Maninagar, Ahmedabad
Tel. : 079 - 32941862 / 32440235
Showroom 3 :
Vedas Ground Floor, Opp SBI Saijpur Branch,
NH 8 Naroda, Patia Cross Road, Ahmedabad - 382 325
Tel. : 079 - 22820106
L
L
L
Workshop 2 :
Opp. Amraivadi Post Office, Near Hatkeswar Circle,
Maninagar, Ahmedabad - 380 026
Tel. : 079 - 30486501 / 02 / 03
L
L
ANAND
Shree Gopinathji Agencies
Workshop :
Survey No. 570 - A/2, Near Indira Statue,
Lambhavel Road, Anand - 388 001
Tel. : 02692 - 247979 / 247878
BHARUCH
Shree Gopinathji Agencies
Showroom & Workshop :
Beside K.U & Company Petrol Pump,
NH-8, Village Vadadala, Bharuch - 392 015
Tel. : 02642 - 654245, 291303, 654845
Telefax : 02642 - 231584
L
L
BHAVNAGAR
V Raj Motors
Showroom & Workshop :
Plot No. 150, Near Press Quarter,
Opp. Maruti Showroom, Bhavnagar-Rajkot Road,
Chitra, Bhavnagar - 364 003
Tel. : 0218 - 2444590, 2444445
BHUJ
Cargo Motors
Showroom & Workshop :
Plot No. 10, Survey No. 29/1,
Bhuj - Mirzapur Road, Bhuj - 370001
Tel. : 02832 - 654191 / 654192
Workshop :
Jamnagar to Rajkot Highway, 8 - Happa,
Jamnagar - 320 120
Tel. : 0288 - 3921194 - 98
L
L
GANDHIDHAM
Cargo Motors
Showroom & Workshop :
NH-8A, Kandla Port Road, Gandhidham - 370 201
Tel. : 02833 - 654370, 653317, 9825611692
GODHRA
Shree Gopinathji Agencies
Showroom & Workshop :
Moonlight Cinema Compount, Vavdi,
Godhra - 389 001
Tel. : 02672 - 645828, 265270, 265271
L
L
GANDHI NAGAR
Gallops Motors Pvt. Ltd.
Showroom & Workshop :
Near Nigam Petrol Pump, Rajshree Cinema Road,
Sector-21, Gandhinagar - 382 010
Tel. : 0232 - 30516107
HIMMATNAGAR
Gallops Motors Pvt. Ltd.
Showroom & Workshop :
Near Motipura Circle, Opp. S.T. Workshop,
Shamlaji Highway, Himmatnagar - 383 001
Tel. : 02772 - 229525, 229524, 308000, 308001
JAM NAGAR
Gallops Motors Pvt. Ltd.
Showroom :
Jamnagar - Rajkot Highway, Hapa,
Opp. Tata IB Motors, Jamnagar
Tel. : 0288 - 3216060
MEHSANA
Gallops Motors Pvt. Ltd.
Showroom & Workshop :
Opp. Wide Angle, Nagalpur Highway,
Mehsana - 384 002
Tel. : 02762 - 241010, 302401 / 02 / 06
Fax : 02762 - 245151
NAVSARI
Monarch Motors
Showroom & Workshop :
Mahalaxmi Estate, Near Bhana Petrol Pump,
Near Grid Char Rasta, N.H. No. 8, Navsari - 396 424
Tel. : 02637 - 265788 / 265599
PALANPUR
Gallops Motors Pvt. Ltd.
Showroom & Workshop :
Survey No. 525/1, Palanpur – Delhi Highway,
Near Palanpur - Deesa Char Rasta, Palanpur - 385 001
RAJKOT
Gallops Motors Pvt. Ltd.
Showroom & Workshop :
Survey No. 219/220, Opp. Parin furniture,
Next to Jay Ganesh, AT & PO,
Kotharia Gondal Highway, Rajkot - 360 003
Tel. : 0281 - 3205151, 2370006 / 8 / 9 / 10,
3983400, 3983407
Showroom 2:
Ground Floor, Fortune Square, Jalaram Street,
Near Kotecha Circle, Kotecha, Rajkot - 360 001
Tel. : 9909992033
L
SURAT
Empire Cars Pvt. Ltd.
Showroom & Workshop :
Plot No. 3, Near Rangoli Hotel, Rundh,
Dumas Road, Surat - 395 007
Tel. : 0261 - 6713300 / 33
190 Service Network
L
Monarch Cars Pvt. Ltd.
Showroom:
Umiya Nagar Society,
Near Shree Choshath Joganiyo Mata Mandir,
Udhna Magdalla Road, Surat - 394 210
Tel.: 0261-2720481, 2720482, 09825274707
Showroom & Workshop 2 :
R. S. No. 7, Opp. Atladra Railway Station,
Atladra, Vadodara - 390 012
Tel. : 0265 - 2681050, 1060, 0187, 1010, 1020
Fax : 0265 - 2681050, 2354984
Showroom & Workshop 3 :
3/A, Sahajanand Industrial Estate,
Munjmahuda, Akota, Vadodara - 390 020
Tel. : 0265 - 2681010, 2681020, 2359898, 2334109
Fax : 0265 - 2681050, 2681060
Workshop :
Next To Sameeti School, Patel Nagar Circle,
Udhna Gam, Surat - 394 210
Tel.: 0261 - 3091001
L
Nanavati Motors
Showroom:
Orchid Tower, Opp Intercity Township,
Puna Kumbharia road, Surat - 395 010
Tel.: 9879114447
Workshop :
Opp. SBI Bank, Puna Patiya,
Puna Kumbhariya Road, Surat - 395 010
Tel. : 0261 - 6456449/429/430
Fax : 0261 - 2647771
L
L
L
SURENDRA NAGAR
Gallops Motors Pvt. Ltd.
Showroom & Workshop :
Plot No. 267, GIDC Vadhvan, Opp. Market Yards,
Near Rekha Bearings, Surendra Nagar
Tel. : 02752 - 321542 - 43
VAPI
Desai Automobiles
Showroom & Workshop :
At & Po : Balitha, Near Woodland Hotel,
National Highway No. 8,
Taluka Pardi, Vapi, Valsad - 395 015
Tel. : 0260 - 6531783, 2400250 - 51
Fax : 0260 - 2426525
VADODARA
Shree Gopinathji Agencies
Showroom & Workshop :
Opp. Gujarat Elec. Board Sub Station,
(Near Prakuti Resort), Chhani, Baroda - 390 002
Tel. : 0265 - 2761105 / 06
Workshop :
49, United Compound, Iasudiya Mori,
Dewas Naka, Indore
Tel. : 0731 - 470055, 56, 57
Fax : 0731 - 470054
L
STATE - MADHYA PRADESH
L
L
L
L
L
BHOPAL
Super Cars Ltd.
Showroom & Workshop :
Plot No. 21 Sector G, Govindpura Industrial Area,
J.K. Road, Bhopal - 462 021
Tel. : 0755 - 4028400, 4228201
Fax : 0755 - 4228203
Varenayam Motors
Showroom & Workshop :
189, Angoori Bagh, Jinsi Road, Bhopal - 462 008
Tel. : 0755 - 2575288 / 299 / 300
Fax : 0755 - 2579918
CHHINDWARA
Sunshine Motors
Showroom & Workshop :
College Road, Lalbagh, Chhindwara - 480 001
Tel. : 0716 - 244125, 244129, 244193 / 194
Fax : 0716 - 244126
GWALIOR
Sumedha Vehicles Pvt. Ltd.
Showroom & Workshop :
Opp. Jhansi Road Police Station,
Jhansi Road, Gwalior - 474 009
Tel. : 0751 - 2422067, 4015789, 3291856
Fax : 0751 - 2348024
INDORE
Super Cars Ltd.
Showroom :
Saket Tower - 3A, Ratlam Kothi,
Near Geeta Bhavan Square, AB Road, Indore - 452 001
Tel. : 0731 - 4700053, 54
Telefax : 0731 - 4700052
Chhabra Autolink Pvt. Ltd.
Showroom :
Plot No.-10 Vishnupuri Main, Near Medisquare
Hospital, Indore - 452001
Tel : 0731- 4267800
Workshop :
Plot No.- 11/11,11/12, Survey No.- 26, Gram Palada,
Khandwa Road, Indore - 452011
Tel : 0731 - 6656000
L
L
L
L
JABALPUR
Oriental Motors
Showroom & Workshop :
497, Karmeta, Near Padwar Kala,
Katangee Bye Pass Road, Jabalpur - 482 003
Tel. : 0761 - 3250007, 3260002, 3250003, 3290001
Fax : 0761 - 4027011
KHANDWA
Bedi Motors
Showroom & Workshop :
Gram Rehmapur, Indore Road, Khandwa - 450 001
Tel. : 0733 - 2244075
RATLAM
Super Cars Ltd.
Showroom & Workshop :
Jaora Road, Near RTO Office, Ratlam - 457 001
Tel. : 07412 - 260040
SAGAR
Varenyam Motorcars Pvt. Ltd.
Showroom :
Opposite Hotel Paradise, Jabalpur Road, Makroniya,
Sagar - 470 004
Tel. : 07582 - 263566
Workshop :
Behind HDFC Bank, Makroniya
Sagar - 470 004
Tel. : 07582 - 239288
Service Network 191
L
SATNA
Oriental Motors
Showroom :
Virat Nagar Colony, Pateri, Panna Road, Satna - 485 001
Tel. : 07672 - 229495
Workshop :
27, Industrial Area Near Union Floor, Rewa Road,
Satna - 485 001
Tel. : 7672 -252763
L
L
STATE - MAHARASHTRA
L
L
L
L
AHMEDNAGAR
Saideep Cars Pvt. Ltd.
Showroom & Workshop :
Survey No. 55/1B/2/1, Nagar Manmad Road,
Ahmednagar - 414 111
Tel. : 0241 - 2779225 - 7
Fax : 0241 - 2779228
AKOLA
Star Motors
Showroom & Workshop :
9/1, Geeta Nagar Near, Alankar Petrol Pump,
Akola - 444 005
Tel. : 07242800087 / 7350008428
L
AMRAVATI
Star Motors
Showroom & Workshop :
Plot No. 8, Navathe Square Bandnera Road, Amravati
Tel. : 0721 - 2510199, 9921008861, 7350008426
AURANGABAD
Soham Motors Pvt. Ltd.
Workshop 1 :
Plot No. 2 & 3, N-2, Mukundwadi, Airport Road,
Aurangabad - 431 003
Tel. : 0240 - 6603769, 6503769
Workshop 2 :
Plot No. 28 & 29, MIDC Chikalthana, Aurangabad
Tel. : 0240 - 2489411, 2474342 - 6
L
L
BARAMATI
Mota Automotive Pvt. Ltd.
Showroom & Workshop :
41 / 1 / B / 17, Nira Road, Kasba, Tehsil - Baramati,
Dist - Pune - 413 102
Tel. : 02112 - 222212, 220212
CHANDRAPUR
ND Cars Pvt. Ltd.
Showroom & Workshop :
Gajanan Maharaj Mandir Square, Bapat Nagar,
Nagpur Road, Chandrapur - 442 401
Tel.: 07172 - 646344/22
DHULE
Jitendra Wheels Pvt. Ltd.
Showroom & Workshop :
P-62, Behind Hotel Manas, MIDC Avdhan,
Dhule - 424 001
Tel. : 02562 - 281222 / 232
Workshop :
Ram Mandir Road, Somani Gram,
Next to Central Warehouse Corporation,
Oshiwara, Goregaon (West), Mumbai - 400 051
Tel. : 022 - 26765555
L
AVK Automart Pvt. Ltd.
Workshop :
Fida Hussain Industrial Estate,
Near Samrat Hotel, Pandurang Wadi Road,
Mira Road (West), Mumbai - 401 104
Tel. : 022 - 28453178, 28455507, 28453564
L
Nikhil Automobiles Pvt. Ltd.
Showroom & Workshop 1 :
A 70, TTC Industry Area, Thane Belapur Road,
Kharghar, Near ICI Color Company,
Khoparkaine West, Navi Mumbai - 400 709
Tel. : 022 - 27780801, 40708888
Fax : 022 - 40708899, 27780805
JALGAON
Soham Motors Pvt. Ltd.
Showroom & Workshop :
93/1, MIDC, RL Square Aurangabad Road,
Jalgaon - 425 003
Tel. : 0257-2211151, 2270085
KOLHAPUR
Unique Automobiles
Showroom & Workshop :
122/1, Pulachi Shiroli, Opp. Sangli Phata,
Kolhapur - 416 122
Tel. : 0230 - 2461518 - 19
Fax : 0230 - 2461520
Showroom 2 :
264-265, Vaswani Chambers, Opp. Old Passport
Office, Pravhadevi, Mumbai - 400 025
Tel. : 022 - 434594444, 24221711-12
Fax : 022 - 24222713
Workshop 2 :
C/o Bharat Tiles & Marbles Ltd.,
Jaibhimnagar, Dharukhana Road, Reay Road (East),
Near Sujala Hotel, Mumbai - 400 010
Tel. : 022 - 64560303, 23774514 / 15 / 16
Fax : 022 - 23774505
Showroom 2 :
Ayodhya Park, Opp. Sangam Talkies,
Kavala Naka, Kolhapur - 416 001
Tel. : 0231 - 2535315, 2535425
Fax : 0231 - 2535615
L
L
Workshop 3 :
Plot No. D - 238 - A, TTC Industrial Area,
MIDC Shiravane, Nerul, Navi Mumbai - 400 706
Tel. : 022 - 43448800
LATUR
Ajinkya Cars Pvt. Ltd.
Showroom & Workshop :
Barshi Road, Near Bidave Engineering College,
Beside Pramod Petrol Pump, Latur - 413 531
Tel. : 02382 - 222600
MUMBAI
Ashtavinayak Auto Pvt. Ltd.
Showroom :
D Mall, Off Veera Desai Road, Andheri (West),
Mumbai - 400 053
Tel. : 022 - 66488888
Fax : 022 - 66488880
Workshop 4:
RC 27 F - O/W/P23, Brick Bunder Sewri,
Haybunder Road, Kala Chowki, Mumbai - 400 033
Tel.: 022 - 64560303
L
JMD VFM Cars India Pvt. Ltd.
Showroom :
471 A- 1st Floor KK Square, Adjoining Solitaire
Corporate Park, Near P&G Plaza Andheri (East),
Mumbai - 400 099
Tel : 022- 28565900/02/03
192 Service Network
Workshop :
Plot No. 48-A, Khairani Road, Opp. Gundecha
Chambers off, Sakivihar Road, Sakinaka Andheri
(East), Mumbai - 400 072
Tel : 022 - 28565900 / 01 / 02
L
L
L
Showroom & Workshop 2 :
Survey No 5/4, Najhate Nagar, Kalewadi Main Road,
Thergaon, Pune - 411 033
Tel. : 020 - 66326600, 66326632, 66326666
L
NASIK
Jitendra Wheels Pvt. Ltd.
Showroom & Workshop :
B-88, Arihant Plaza, MIDC, Ambad, Next to Hotel Taj,
Mumbai - Agra Highway, Nasik - 422 010
Tel. : 0253 - 2384432 / 632 / 832, 6636666, 6637777
Fax : 0253 - 2384532
NAGPUR
Star Motors
Showroom & Workshop :
44 / 4, Wahajara, Kamptee Road,
NH - 7, Nagpur - 440 026
Tel. : 0712 - 6507836/37, 6507916, 6461503 / 04
Fax : 0712 - 2632429
Workshop 2 :
Patel Tiles Compound, Sr.No. 42/1, Shivaji Nagar,
Behind ST Bus Stand, Pune - 411 005
Tel. : 020 - 32424202, 65270809, 7774010500
Tajshree Motors Pvt. Ltd.
Showroom :
Plot No. 1 Hindustan Colony, Wardha Road,
Nagpur - 440 002
Tel. : 0712 - 2250242 / 2250243 / 2250244
NANDED
Bafna Automotives
Showroom & Workshop :
Gut No. 235, Pimpalgaon (Mahadeo),
Nanded -Akola Road, Nanded - 431 607
Tel. : 02462 - 274069 / 652099, 311102
L
PUNE
Platinum Chevrolet
Showroom & Workshop 1 :
Sr No 45/1/B/A, Shankarseth Road, Gutkewadi,
Pune - 411 037
Tel. : 020 - 26440029
L
L
SATARA
Unique Automobiles
Showroom & Workshop :
41, Mutha Colony, Sadar Bazar, Satara - 416 002
Tel. : 09623225299
SOLAPUR
Mota Automotive Pvt. Ltd.
Workshop :
MRC Cable India, A/20/6, MIDC Chincholi,
Solapur - 413 255
Tel. : 9272222233
SANGLI
Unique Automobiles
Showroom :
442-3, Kulkarni Complex, 100 feet road,
South Sivaji Nagar, Sangli - 416 416
Tel. : 0233 - 2326544
Fax : 0233 - 2326594
YAVATMAL
SARAS MOTORS
Pobaru Marketing & Agencies Pvt. Ltd.
Showroom :
Shop No. 5, 6, 7, 8 Udhyog Bhavan,
Dharwha Road, Yavatmal - 445 001
Tel. : 07232 - 255991
Fax : 07232 - 255992
Workshop :
Block No. B-16 MIDC (Lohara), Yavatmal - 445 001
Tel. : 07798883816
Fax : 07232 - 255992
Workshop 1 :
Reality Warehousing Pvt. Ltd., Gate No. 1337 / 1,
Pune Nagar, Wagholi, Pune - 412 307
Tel. : 020 - 46609999
L
L
L
Showroom 2 :
ICC Trade Centre, Showroom No. 4, Survey No. 403
A/2, Senepati Bapat Road, Pune - 411 016
Tel. : 020 - 25666941 / 2 / 3 / 4
Workshop :
Plot No. 679, Ghat Road,
Near Cotton Market Square, Nagpur - 440 018
Tel. : 0712 - 2734466 / 2734467
L
Singh Cycle & Motor Co.
Showroom 1 :
S. No. 38/4, Krishna Complex, Hadapsar Bypass
Road, Near Radisson Hotel, Kharadi, Pune - 411 014
Tel. : 020 - 32419385 / 32319526
Workshop :
Kulkarni Complex, 100 Feet Road,
Near MSEB Sub-Station, Sangli - 416 416
Tel. : 0233 - 2326544
Fax : 0233 - 2326594
THANE
SC Auto Corporation
Showroom:
Modi House, Opp. to LIC Building, Naupada,
Eastern Express Highway, Thane (West),
Thane - 400 602
Tel. : 022 - 67610000
Fax : 022 - 67610209
Workshop :
Pioneer Estate Corporation, 133-134, Pokhran Road
No.2, Opp. Oswal Park, Thane (West) - 400601
Tel. : 022 - 66040000
Fax : 022 - 66040102
L
Angel Auto World Pvt. Ltd.
Showroom & Workshop 1 :
Grishma garden, Gokhivare, Vasai East, Thane,
Mumbai (Vasai) - 401208
Tel :0250-6453030 /6061777
Showroom & Workshop 2 :
J-176, MIDC, Tarapur Road,
Boisar (West) - 401505
Tel. : 02525 - 655454 / 655353
L
Nikhil Automobiles Pvt. Ltd.
Showroom & Workshop :
Survey No. 6, Hissa No. 6, Manpada Gaon,
Kalyan Shill Road, Dombivali (East) - 421 204.
Tel. : 0251 - 3048888 / 3048899
Service Network 193
STATE - CHATTISGARH
L
L
BILASPUR
Vardhaman Motors
Showroom & Workshop :
Near Uslapur Railway Crossing, Mungeli Road,
Sakri, Bilaspur
Tel. : 07752 - 217934 / 217935
RAIPUR
Vardhaman Motors
Showroom & Workshop :
9/1, Mahoba Bazar, GE Road, NH-6,
Kumhari Dist. - Durg, Raipur - 492 001
Tel. : 7489177999, 7883221999
Showroom 2 :
Ashoka Millenium, Ring Road,
Raipur - 492 011
Tel. : 7714030104, 7712410008
194 Service Network
SOUTH ZONE
Workshop :
Plot No. 95 & 96, Wood Complex,
Near Ayyappa Temple, Nellore - 524 004
Tel. : 9247000022
STATE - ANDAMAN & NICOBAR
L
PORTBLAIR
Group Engineers
Showroom :
Prem Nagar Junction, (SY No 1394/1),
Haddo Post Port Blair - 744 102
Tel. : 03192 - 230301, 242901
Workshop :
Opp Womens Working Hostel, Dollygunj,
Port Blair, Junglighat Post, Portblair - 744 103
Tel. : 03192 - 253044 / 253011
L
L
STATE - ANDHRA PRADESH
L
L
L
L
L
BHIMAVARAM
Orange Auto Pvt. Ltd.
Showroom & Workshop :
Door No. 2-25, # 6, Near Bharath petroleum bunk,
Undi Road, Bhimavaram - 534 202
Tel. : 9052781234 / 905224678
CHITTOOR
M.G. Brothers Automobiles (P) Limited
Showroom & Workshop :
NH 4, Near Iruvaram Check Post, Chittoor - 517 001
Tel.: 92470 00003, 9247000027
L
NELLORE
M.G. Brothers Automobiles (P) Limited
Showroom:
26-2-1777, Near Ayyappa Temple, Vedayapalem Area,
Nellore - 524 004
Tel:. 9247000000
VISHAKHAPATNAM
Orange Auto Pvt. Ltd.
Showroom & Workshop :
D. No.38-22-87, Varun Avenue, NH-5, Murali Nagar,
NH. Birla Junction, Vishakhapatnam - 530 075
Tel.: 0891 - 2572222, 9052402345
Showroom 2 :
D. No. 4-46-12, G. K. Mansiom, Pedawaltier,
Vishakhapatnam - 530 017
Tel.: 0891 - 2572222, 4444
Fax: 0891 - 6645555
L
STATE - KARNATAKA
L
TIRUPATHI
M.G. Brothers Automobiles (P) Limited
Showroom:
11-46/A, Renigunta Road, Tirupathi - 517 501
Tel.: 9299999970
Workshop :
Plot No: 254, Auto Nagar,
Near Vinayaka Temple, Renigunta Road,
Tirupathi - 517 506
Tel.: 9247000024
GUNTUR
Fusion Motors
Showroom & Workshop :
Plot No. 296 & 297, Opp. Sarvani Diesel Enginnering,
Autonagar Main Road, Autonagar, Guntur - 522 001
Tel. : 0863 - 6454545
KURNOOL
Dheeraj Motors
Workshop :
NH-7 Road, Near APSP 2nd Battalian,
Ballary Chowrasta, Kurnool - 518 004
Tel. : 8518 - 253777
RAJAHMUNDRY
Orange Auto Pvt. Ltd.
Showroom & Workshop :
D. No. 82-10-2, Venkateswara Nagar,
Near Lalacheruvu, Near ONGC Complex, NH-5 Road,
Rajahmundry - 533 103
Tel. : 0883 - 6575555 / 6580888
Workshop :
Opposite to Fusion Towers, 36-12-2,
Near Siddartha Public School, Moghul Rajapuram,
Vijayawada - 520 010
Tel. : 0866 - 6645593 / 94, 9603123777
VIJAYWADA
Fusion Motors
Showroom :
Fusion Towers, 36-12-2, Opposite to Siddartha
Public School, Moghul Rajapuram,
Vijayawada - 520 010
Tel. : 0866 - 6645555 / 9603123666
Fax : 0866 - 6645592
BANGALORE
Kropex India Ltd.
Showroom & Workshop :
49/1, Singasandara, Hosur Main Road,
Bangalore - 560 068
Tel. : 080 - 43574357
Fax : 080 - 43574353
Workshop 2 :
Sy. No. 26, Hanumareddy Layout,
Chinnapanahalli Main Road, Marathahalli Post,
Bangalore - 560 037
Tel. : 9663388812
L
Trident Automobiles Pvt. Ltd.
Showroom & Workshop :
SY. No, 18/1B, (Old No 18/1C), Nayanda Halli Grama,
Kengeri Hobli, Bangalore - 560 038
Tel. :080 - 67149191/292, 67149001
Showroom & Workshop 2 :
No. 122/1, C. Shankar Reddy Layout, Kalyana Nagar,
Outer Ring Road, Bangalore - 560 043
Tel. : 080 - 43430300, 43430500
Fax : 080 - 43430308, 43430517
Showroom 3 :
14, Langford Avenue, Langford Road,
Bangalore - 560 025
Tel. : 080 - 4330300
Showroom 4 :
No. 300 A - 70, 36th Cross, 10th Main,
5th Block, Jay Nagar, Bangalore - 560 041
Tel. : 080 - 42542999
Showroom 5 :
# 95/3, Doddanekundi Village, Karthik Nagar,
Marathahalli, Bangalore - 560 037
Tel. : 080 - 30651404
Service Network 195
Workshop 3 :
No. 558/1,60 ft Road, 9th Cross, HAL 2nd Stage,
Old Airport Road, Behind Leela Palace,
Kodihalli, Indiranagar, Bangalore - 560 008
Tel. : 080 - 49155858
L
K.H.T. Chevrolet (A Division Of Morzaria Real
Tech Private Limited)
Showroom :
No: 725, West of Cord Road, Rajajinagar,
1st Stage, Mahalakshmi Layout, Bangalore - 560 086
Tel. : 080 - 49363636
L
L
Workshop :
No. 305, 5th Main Road, 2nd Cross, 4th Phase,
Peenya Industrial Area, Bangalore - 560 058
Tel. : 080 - 49353637
L
L
L
L
BELGAUM
Bellad Enterprises Pvt. Ltd.
Showroom & Workshop :
Shri Krishna Weaving Mill Compound,
Venguaral Road, Vijaya Nagar, Belgaum - 591 108
Tel. : 0831 - 2449556 / 557, 6514911
Fax : 0831 - 2472209
BELLARY
Bellad Enterprises Pvt. Ltd.
Showroom & Workshop :
Near Bellary Rolling Mills, Anantpur Road,
Bellary - 583 101
Tel. : 08392 - 261234 / 5
Fax : 08392 - 261235
DAVANGERE
Modi Motors
Showroom & Workshop :
#869/1-2, PB Road, Opposite Sai International Hotel,
Davangere - 577 006
Tel. : 08192 - 233896
GULBARGA
VKG Motor World
Showroom & Workshop :
Plot - 1&2, Survey No. 116/2, Behind Mahendrakar
Complex, Kapnoor Humnabad Road,
Gulbarga - 585104
Tel. : 08472 - 224555
Fax : 08472 - 258019
HUBLI
Bellad Enterprises Pvt. Ltd.
Showroom & Workshop :
Opp. NGEF, Rayapura, Dharwad,
P. B. Road, Hubli - 580 025
Tel .: 0836 - 2218338 / 39
Telefax : 0836 - 2218337
MANGALORE
Vibrant Motors
Showroom:
Mont Tiera Apartments, Vivekanand Road,
Kadri, Nantoor-Padav, Mangalore - 575004
Tel.: 0824 - 2225544
L
Showroom 2 :
33/2440B, Geetanjali Junction, NH Byepass
Chakkaraparambu, Cochin - 682 032
Tel. : 0484 - 2343146
L
Workshop :
C/O Manjunath Retreading Works, Kulshekara
Chowki, Near KMF Milk Dairy, Kulshekar,
Mangalore - 575 005
Tel. : 0824 - 2231202
L
L
MYSORE
Dyuthi Motors Pvt. Ltd.
Showroom & Workshop :
No. 201 / 1 & 2, Hunsur Road, Hinkal Village,
Mysore - 570 017
Tel. : 0821 - 4240500 - 16
Fax : 0821 - 4241899
SHIMOGA
Frontline Automobiles
Workshop :
Shankar Mutth Road, Shimoga - 577 201
Tel. : 08182 - 229099
Fax : 08182 - 229098
L
L
L
STATE - KERALA
L
L
ALLEPPEY
Geeyam Motors Pvt. Ltd.
Showroom :
Koorayil Annex, Opp. Bhattathiripurayidom,
Near MCH Junction, Alappuzha, Alleppey - 688 001
Tel. : 0477 - 2238501
CALICUT
German Motors
Showroom & Workshop :
118-A, Chungam Junction, West Hill,
Calicut - 673 005
Tel. : 0495 - 2383680 / 81, 2383770 / 71
Fax : 0495 - 3041100, 2381909
COCHIN
Geeyem Motors Pvt. Ltd.
Showroom & Workshop :
11/336, NH-47 Bye Pass, Nettor P.O.,
Ernakulam, Cochin - 682 304
Tel. : 0484 - 2703245 - 49, 3097100, 3097101
Fax : 0484 - 2703244
L
CHALAKKUDY
Geeyem Motors Pvt. Ltd.
Showroom :
IX/461A, B, Panampilly College, NH-47, Potta,
Chalakkudy - 680 722
Tel. : 0480 - 2705125, 2705123
KANJRAPALLI
Geeyem Motors Pvt. Ltd.
Showroom :
Near A K J M School, K K Road, Kanjirappally
(Kottayam Dt.)
Tel. : 0482 - 8201616
KANNUR
German Motors
Showroom & Workshop :
BP6-14A, Valapattanam, Kannur - 670 010
Tel. : 0497 - 2774466 - 67, 3057200
Fax : 0497 - 27744666, 3057200
KASARGOD
German Motors
Showroom & Workshop :
15/89B, Citizen Nagar, Chengala, Kasargod - 671123
Tel. : 04994 - 302200 - 10
Fax : 04994 - 302211
KAYAKULAM
Geeyam Motors Pvt. Ltd.
Showroom & Workshop :
NH-47, Near MSM College, Kayakulam - 690 502
Telefax : 0479 - 2446650
196 Service Network
L
L
L
KODANGULUR
Geeyem Motors Pvt. Ltd.
Showroom :
XII/ 121-122, Opp. Medicare Hospital,
Kottapuram PO, TKS Puram, Kodungalur - 680 667
Tel. : 0480 - 2803561 / 62
KOTAYYAM
Geeyam Motors Pvt. Ltd.
Showroom & Workshop :
Karithas Junction, Thellakom P.O., Kotayyam-686016
Tel. : 0481 - 2792203
Fax : 0481 - 2792383
KOLLAM
Deedi Motors
Showroom :
Post Office Junction, Pallimukku, Kollam - 691 010
Tel. : 0474 - 3257777 / 2725959
Fax : 0474 - 2725900
Workshop :
Cantonment, North Nagar, Pullikada, Kollam - 691001
Tel. : 0474 - 2750010 / 11
L
L
L
L
L
L
KOTTAKKAL
German Motors
Showroom & Workshop :
260A, Palathara, Cherusola P.O., Kottakkal,
Malappuram
Tel. : 0494 - 2611666
MUVATTUPUZHA
Geeyam Motors Pvt. Ltd.
Showroom :
Mackar Plaza, EEC Market Road, PNB Junction,
Muvattupuzha - 686 673
Tel. : 0485 - 606600, 2835272 / 73
Fax : 0485 - 2832554
Workshop :
902/903,Opp. Mackar Plaza, EEC Market Road,
PNB Junction, Muvattupuzha - 686 673
Tel. : 0485 - 2835272 / 73
Fax : 0485 - 2832554
L
L
MUTTUM
Geeyem Motors
Showroom & Workshop :
SY NO: 70/15, 71/10, Thai Kkattukara P.O, N H Road,
Distt. Aluva, Muttum, Cochin - 683 106
Tel. : 0484 - 2632193 / 94 / 95 / 96 / 97
PERINTHALMANNA
German Motors
Showroom & Workshop :
AP-IV 664F, Opp. ITC, Tirurkad,
Perinthalmanna - 679 531
Tel. : 04933 - 325060, 237000, 239878
Telefax : 04933 - 2737000
PALAKKAD
Geeyam Motors
Showroom & Workshop :
Door No. 8/1198, NH Bypass Road,
Chandra Nagar, Palakkad - 678 007
Tel. : 0491 - 2504133
Fax : 0491 - 2504143
L
L
THRISSUR
Geeyem Motors Pvt. Ltd.
Showroom :
14/3-A1, Guruvayoor Road Puzhakkal,
Ayyanthole P.O., Thrissur - 680 003
Tel. : 0487 - 2388945 - 46, 2388851 - 52
Fax : 0487 - 2388851
Workshop :
Near Boating Station, Puzhakkal Post Office,
Thrissur - 680 553
Tel. : 0487 - 2225100, 2225101
WAYNAD
German Motors
Showroom / Workshop :
Muttil - Post, North Kalpetta, Waynad - 673 122
Tel. : 04936 - 304200 / 202414
Fax : 04936 - 304201
STATE - PONDICHERRY
L
PATHANAMTHITTA
Deedi Motors Pvt. Ltd.
Showroom & Workshop :
Kumbazhethu Buildings, Churulicode P.O.,
Kozhencherry Road, Pathanamthitta - 689 645
Tel. : 0468 - 2272079, 2272080
Fax : 0468 - 2272078
THIRUVALLA
Deedi Motors Pvt. Ltd.
Showroom :
No. 54/2, Kurusumoottil Buildings,
M C Road, Mazhuvangad, Thiruvalla - 689 101
Tel. : 0469 - 2740800
TRIVENDRUM
Deedi Motors Pvt. Ltd.
Showroom / Workshop :
Erumalathopu, N.H. Bye Pass Road, Venpalvattom,
Anayara P.O., Trivendrum - 695 029
Tel. : 0471 - 2556006, 3257777, 2558599, 2558499
Fax : 0471 - 2551020
PONDICHERRY
Aakash Auto Pvt. Ltd.
Showroom :
No. 1, Sounderrajan, 100 ft. Road, Sounder Rajan
Nagar, Mudaliarpet, Pondicherry - 605 004
Tel. : 0413 - 2204400
Fax : 0413 - 2204033
Workshop :
No. 23, 9th Cross, Metupallyam,
Industrial Estate, Pondicherry - 605 009
Tel. : 0413 - 2279900
STATE - TAMIL NADU
L
CHENNAI
Sundaram Motors
Showroom & Workshop :
180, Anna salai Road, Chennai - 600 006
Tel. : 044 - 28579203 / 28 / 32
Fax : 044 - 28579210
Workshop 2:
116/4 Mahalakshmi Nagar Extention,
Numbal Village Thirverkadu Post, Chennai - 600 077
Tel.: 044 - 26493020/21
L
KLN Motors Agencies Pvt. Ltd.
Showroom 1 :
Old No. 861, New No. 232, Poonamallee High Road,
Kilpauk, Chennai - 600 010
Tel : 044 - 23452937 / 38
Telefax : 044 - 23452936
Service Network 197
Workshop 1 :
Shop No. 50, SIDCO Industrial Area,
Ambattur, Chennai - 600 058
Tel. : 044 - 23452930 - 32
L
Showroom & Workshop 2 :
No. 8-NP, Developed Plot, Guindy Industrial Estate,
Ekkattuthangal, Near Kasi Theatre, Chennai - 600 097
Tel. : 044 - 23458941 / 42
L
L
CUDDALORE
Aakash Auto Pvt. Ltd.
Showroom & Workshop:
RS No.155/11, Vadalur Main Road, Periamedu,
Karaikadu Village, Cuddalore Taluk,
Cuddalore - 607 005
Tel.: 04142 - 297997, 7373299933, 7373599933
L
COIMBATORE
Anamallais Agencies (P) Ltd.
Showroom :
252, Mettupalayam Road, Coimbatore - 641 043
Tel. : 0422 - 2435555 / 2432999
Fax : 0422 - 2446151
L
Pressana Automobile
Showroom :
No. 1987, Trichy Main Road, LCT Complex,
Coimbatore - 641 005
Tel. : 0422 - 4041111
Workshop :
505/1, Sowaripalayam Main Road,
Ramanathapuram, Coimbatore - 641 045
Tel. : 0422 - 4051111
L
ERODE
Pressana Automobile
Showroom & Workshop :
No.1, ChinnaKadu Thottam,
Veerapampalayam, Dhindal P.O., Erode - 638 012
Tel. : 0424 - 2276046 / 47
Fax : 0424 - 2276048
Workshop :
276/85, Tiruchengode Main Road,
Opp. Old Lakshmi Kalyana Mandapam,
Namakkak - 637 001
L
Workshop :
2/2, 1E, Balaji Nagar, Rayakottai Road,
Opp. to LUK India, Hosur - 635 109
Tel. : 04344 - 291033
Workshop :
249A, Mettupalayam Bye Pass Road,
Coimbatore - 641 043
Tel. : 0422 - 2433444
L
HOSUR
Thriive Cars
Showroom :
2, Rajappa Mudaliar Building,
NH-7, Krishnagiri, Bangalore Byepass Road, Hosur
Tel. : 04344 - 644588
L
L
KARUR
Pressana Automobile
Showroom & Workshop :
No.3, Salem Byepass Road, Kulathupalayam,
Karur - 635 006
Tel. : 04324 - 222301
Fax : 04324 - 222302
L
MADURAI
A.R.A.S. Motors (P) Ltd.
Showroom :
35/1, Dindigul National Highway,
Near A. R. C. Parcel Service, Villangudi,
Madurai - 625 018
Tel. : 0452 - 2669617, 3091917
Fax : 0452 - 2669618
L
Workshop :
Plot No. 64 & 68, Thiruvalavayanallur Post,
National Highway No. 7, Opp Arokya Milk
Processing Unit, Nagari, Madurai - 625 221
Tel. : 0452 - 2463612 / 13 / 14
L
NAGERCOIL
A.R.A.S. Motors (P) Ltd.
Showroom & Workshop:
2/86, Tirunelveli Main road,
Ozhuginasery, Nagercoil - 629 001
Tel. : 04652 - 644664 (Showroom)
04652 - 272443 (Workshop)
NAMAKAL
Thriive Cars
Showroom :
5/58, Salem Main Road, Namakal
Tel. : 04286 - 275603
L
L
PUDUKOTTAI
Jayaraj Karz
Showroom & Workshop :
5915/1, Khalif Nagar, Thirumayam Road,
Pudukottai - 622 001
Tel. : 04322 - 262223
PERAMBALUR
Jayaraj Karz
Showroom & Workshop :
No. 36, Trichy to Chennai Highway, Eraiyur,
Veppanthattai, Perambalur, Tamilnadu - 621 133
Tel. : 9244222728
SALEM
Thriive Cars
Showroom & Workshop :
1116, Salem Chennai Highway Road,
Near Holy Cross, Hr. Sec. School,
Ammapet, Salem - 636 014
Tel. : 0427 - 2242603
Fax : 0427 - 2242604
TRICHY
Jayaraj Karz
Showroom & Workshop :
Madurai Main Road, Panjapur, Trichy - 620 012
Tel. : 0431 - 2906420 / 6541207
Fax : 0431 - 2202187
THIRUNELVELLI
A.R.A.S. Motors (P) Ltd.
Showroom & Workshop :
1183/3, National Highway Jothipuram,
Konganthanparai, Thirunelvelli - 627 007
Tel. : 0462 - 2551070, 3269638
Fax : 0462 - 2554111
TIRUPUR
Anamallais Agencies Pvt. Ltd.
Showroom & Workshop :
396/6, Kamaraj Road, Palladam Road,
Tirupur - 641 604
Tel. : 0421 - 2918999
198 Service Network
L
L
THANJAVUR
Jayaraj Karz
Showroom & Workshop :
Pudukottai Bye - Pass Road, Thanjavur
Tel. : 04362 - 226452
L
VELLORE
Sayar Cars
Showroom & Workshop :
S.F. No. 3004, New By Pass Road,
Near Collectorate, Vellore - 632 004
Tel.: 0416 - 2222017
Workshop 1 :
B-45/46, Industrial Estate, Near Andhra Bank
Sanatnagar, Hyderabad - 500 018
Tel. : 040 - 66265555 / 66269999
Showroom & Workshop 2 :
16-2-705/1/1, Malakpet, Opp. Srukrupa Market,
Hyderabad - 500 036
Tel. : 040 - 66815555
Fax : 040 - 66179999
STATE - TELANGANA
L
HYDERABAD
Kun Automobiles (P) Ltd.
Showroom & Workshop 1 :
Plot No. 74, Snehapuri Colony, Near Andhra Bank,
Nagole Main Road, Nagole, Hyderabad - 500 035
Tel. : 040 - 24220013, 44886666, 44886767/700/701
Fax : 040 - 24220313
Showroom 2 :
House No. 1-3-1045, Viceroy Hotel Lane,
Kawadiguda Road, Hyderabad - 500 080
Tel. : 040 - 27532385 - 89
Fax : 040 - 27532384
Showroom 3 :
Plot No.3 & 4, Ravi Colony, Main Road,
Kondapur, Hyderabad - 500 084
Tel. : 040 - 45469999 / 89 / 79 / 69
Fax : 040 - 45469959
Showroom & Workshop 3 :
A2, Balanagar Techno Craft Industrial Estate,
Balanagar, Hyderabad - 500 037
Tel. : 040 - 23721111
Fax : 040 - 23729999
L
L
Workshop 2 :
1-8-670, Azamabad, RTC 'X' Road, Hyderabad-500020
Tel. : 040 - 27668678 / 27668761
Fax : 040 - 27668632
Workshop 3 :
Plot No. 21, Mini Industrial Estate,
Hafeezpet Road, Kondapur, Hyderabad - 500 049
Tel. : 040 - 31906677
Workshop 4 :
Plot No.37, Survey No.45,Vignan Junior College
Road, Kundapur, Hyderabad - 500 081
Tel. : 040 - 31906699
Orange Auto Pvt. Ltd.
Showroom 1 :
6-3-249/3, Abhinandan Towers, Road No. 1,
Banjara Hills, Hyderabad - 500 034
Tel. : 040 - 66515555
Fax : 040 - 66469999
L
KARIMNAGAR
Kun Automobiles (P) Ltd.
Showroom & Workshop :
M.No.8-6-128, Kothi Rampur, Hyderabad Highway
Road, Karim Nagar - 505 001
Tel. : 0878 - 2276633 / 9885520022
Fax : 0878 - 2276633
KHAMMAM
Fusion Motors
Showroom & Workshop :
Plot No. 11, Sri Sri Circle, Opp. Reliance Petrol Bunk,
Rotary Nagar, Bypass Road, Khammam - 507 002
Tel.: 9247623666, 8096991122
WARANGAL
Kun Automobiles (P) Ltd.
Showroom :
Door No. 15-2-4-1-1 & 15-2-4,
Mulugu Cross, Warangal - 506 007
Tel. : 0870 - 2421955
Fax : 0870 - 2421955
Workshop :
H. No. 23-6-132, Hunter Road,
Opp. Citizens Club, Warangal
Tel. : 0870 - 2523377 / 88 / 99
Fax : 0870 - 2523399
Service Network 199
EAST ZONE
L
STATE - ARUNACHHAL PRADESH
L
ITANAGAR
Sango Motors
Showroom & Workshop :
NH-52A, Near Shiv Mandir, 6 Km
Between Nahalagun, Dist. Papumpare
Itanagar, Arunachal Pradesh - 791 110
Tel. : 0360 - 2001166 / 67, 2033153
STATE - ASSAM
L
L
L
L
L
BONGAIGAON
Raj N Dibyani Automobiles
Showroom & Workshop :
Near Lower Assam Hospital, Chapaguri Road,
North Bongaigaon, Bongaigaon
Tel.: 03664 - 231890, 230545
DIBRUGARH
Pashupati Traders
Showroom & Workshop :
P. N. Road, Chiring Chapori, Dibrugarh - 786 001
Tel. : 0373 - 2323281
Telefax : 0373 - 2323296
GUWAHATI
Srishti Automobiles Pvt. Ltd.
Showroom :
Opp. Pantaloons, G S Road, Rukminigaon,
Guwahati, Assam - 781 022
Tel. : 0361 - 2223666
Fax : 0361 - 2223888
L
NAGAON
LB Motor (A Unit of Borah & Sons Pvt. Ltd)
Showroom & Workshop:
AT Road, Dimarguri, Nagaon - 782 003
Tel.: 03672 - 253157
TEZPUR
GNB Motors
Showroom :
P.O. Nikamul, Beside Udyanpath,
Tezpur - 784 001
Tel. : 03712 - 255999
Workshop :
P.O. Nikamul, Udyanpath,
Tezpur - 784 001
Tel. : 03712 - 255998
L
TINSUKIA
Dhansri Motors
Showroom & Workshop :
Opposite New Tinsukia Railway Junction,
A.T. Road, Hijuguri, Tinsukia - 786 125.
Tel. : 0374 - 2311397
Workshop :
Bhootnath Road, Sahadurpur, PS Agamkuan,
Patna - 800 020
Tel. : 0612 - 2341151
L
L
L
L
L
L
MUZAFARPUR
Pandey Motors Pvt. Ltd.
Showroom & Workshop :
Mithila Body Builders, NH-18,
Bhagwanpur, Muzafarpur - 842 001
Tel. : 0621 - 2252762
PATNA
Pandey Motors Pvt. Ltd.
Showroom :
Pandey Plaza, Exhibition Road, Patna - 800 001
Tel. : 0612 - 2205195, 3955491
Fax : 0612 - 2205196
GAYA
Brijnandan Automobile Pvt. Ltd.
Showroom & Workshop :
727 Old 1026 / New No. NH - 83,
Near BMP - 3, Gaya - 823 004
Tel. : 0631 - 2200131
PURNEA
Hare Krishna Motors Pvt. Ltd.
Showroom & Workshop :
Damka Chowk, NH - 31, Gulabbagh, Purnea - 854 326
Tel. : 9234323211
STATE - JHARKHAND
STATE - BIHAR
Workshop :
Radha Nagar, VIP Road, Six mile, Guwahati,
Assam - 781 022
SHIBSAGAR
Pashupati Traders
Showroom & Workshop :
KPM Chariali, Shivasagar, Shivasagar - 785 640
Tel. : 03772 - 220082 / 88
SILCHAR
Smart Motors Pvt. Ltd.
Showroom & Workshop :
NH-54, Ramnagar, Silchar - 788 008
Tel. : 03842 - 268701, 9207042806
BOKARO
Power Motors
Showroom & Workshop :
N-1, City Centre, Sector - 4,
Bokaro Steel City, Bokaro - 827 004
Tel. : 06542 - 233555 / 232977
Fax : 06542 - 232988
DHANBAD
Sorabh Automobiles
Showroom :
Indramani Palace, Opp Flair Bajaj, Saraidhela,
Dhanbad - 826 001
Tel. : 0326 - 2201366
Workshop :
Tilakraidih, Govindpur Road, Dhanbad - 826 001
Tel. : 9470580855
L
HAZARIBAGH
Laxmi Auto
Showroom & Workshop :
Zulu Park Road, Near SBI Main Branch,
Hazaribagh - 825 301
Tel. : 06546 - 222929
200 Service Network
L
L
JAMSHEDPUR
Narbheram Motors Pvt. Ltd.
Showroom & Workshop :
M-4, Phase-VI, Adityapur Industrial Area,
P.O. Gamaria, Jamshedpur - 832 108
Tel. : 0657 - 3293612, 3297763, 3290649, 6510531
Telefax : 0657 - 2200532
RANCHI
Rahul Automobiles Pvt. Ltd.
Showroom 1 :
Piska More, Ratu Road, Ranchi - 834 005
Tel. : 0651 - 2510251 / 52
Showroom 2 :
Line Tank Road, MR Tower, Ranchi - 834 001
Tel. : 0651 - 3298436
Fax : 0651 - 2510252
Workshop :
Ratu Road, Near Kamre Ashram, Ranchi - 834 005
Tel. : 0651 - 2511558 / 564, 3241206
L
L
L
L
L
L
BALASORE
Venus Auto Works Pvt. Ltd.
Showroom & Workshop:
NH - 5, Remuna Golai, Januganj,
Near Bhatter Mill, Balasore -756 019
Tel. : 06782 - 244013, 244014
BHUBANESWAR
Venus Auto Works Pvt. Ltd.
Showroom & Workshop :
A/62, Nayapalli, Bhubaneswar - 751 003
Tel. : 0674 - 3019999 (Showroom)
0674 - 3019900, 3270444, 9337070444
(Workshop)
Telefax : 0674 - 3019908
Super Sales Automobiles Pvt. Ltd.
Showroom & Workshop :
Plot No. 644/2148, NH-5, Pahal,
Bhubneswar, Dist - khurda - 752 101
Tel. : 0674 - 2463913, 2463914, 6543010 / 11
ROURKELA
Balaram Motors
Showroom & Workshop :
Opposite Pahadi Kanta, Vedvyash, Rourkela - 769 041
Workshop 1 :
241/2B, APC Road, Opp. Khanna Cinema,
Kolkata - 700 004
Tel. : 033 - 25551370 / 72 / 73 / 74, 25552509
Workshop 2 :
108 F, Nilgunge Road, Agarpara, Kolkata - 700 058
Tel. : 033 - 25552509
L
Dulichand Motors Pvt. Ltd.
Showroom :
"Shrachi Towers", 686 Anandapur,
E.M. Bypass, Near Ruby Hospital, Kolkatta - 700 107
Tel. : 033 - 24431801 - 02, 40141616
Fax : 033 - 40141624
STATE - WEST BENGAL
STATE - ORISSA
L
SAMBALPUR
Bharat Motors Ltd.
Showroom & Workshop :
9, Industrial Estate, Near Central School,
Bareipali, Sambalpur - 768 006
Tel. : 0663 - 2402736, 2405286
Fax : 0663 - 2585894
ASANSOL
Shaila Autotech
Showroom & Workshop :
NH-2, Chanda More, Asansol - 713 339
Telefax : 0341 - 2343704 / 705
HOWRAH
Priti Motor Udyog (P) Ltd.
Showroom :
NH-6, Bombay Howrah Highway, Howrah
Workshop :
5/51, Jagatipota, Ahalya Nagar,
Opp. Jagatipota Kisan Market, Kolkatta - 700 099
Tel. : 033 - 40161718, 24264224, 24264214
m
Workshop :
Khejurtala Kolkata Truck Terminal,
Khejurtala, NH-6, Howrah - 711 403.
Tel. : 033 - 65002070/71/72
L
KOLKATA
OSL Autotech Pvt. Ltd.
Showroom :
2/1A, Sarat Bose Road, Lansdowne Towers,
Kolkata - 700 020
Tel. : 033 - 66270400
Workshop 2 :
Budge Budge Trunk Road, Rampur, P.O. : Gobindopur,
P.S. : Maheshtala, Kolkata - 700 141
Tel. : 033 - 66270222 / 223 / 205
Fax : 033 - 66270208
L
Workshop :
49 E, Topsia Road South, Kolkata - 700 046
Tel. : 033 - 66270500
L
Speed Autotech
Showroom :
"The Meridian", Kazi Nazrul Islam Sarani,
(VIP Road), Kolkata - 700 059
Tel. : 033 - 25007915 - 9
Fax : 033 - 40150824
Longia Motors Pvt. Ltd.
Workshop 1 :
15/1D, Sahanagar Road, (Near Rashbehari Avenue
Crossing), Kolkatta - 700 026
Tel. : 033 - 66270100 / 119
Fax : 033 - 66270121
SILIGURI
Kaysons Automotive Pvt. Ltd.
Showroom & Workshop :
IIIrd Mile, Checkpost,
Opp. New Eastern Bypass Road,
Sevoke Road, Siliguri - 734 401
Tel. : 0353 - 2544533 - 35, 2777723
Fax : 0353 - 2544456
STATE - MANIPUR
L
IMPHAL
Rajpri Enterprise
Showroom & Workshop :
Chigmeirong Mamang Leikai,
Imphal East, Imphal - 795 001
Tel. : 0385 - 2421183
Service Network 201
STATE - NAGALAND
L
DIMAPUR
Urban Station
Showroom & Workshop :
NSC Petrol Pump, NH-39, 6th Mile, Kohima Road,
Dimapur, Nagaland - 797 112
Tel. : 03862 - 240994, 240992
STATE - TRIPURA
L
AGARTALA
Sri Krishna Automobiles
Showroom & Workshop :
Plot No. 4612 & 4615, Shanihani,
Airport Road, Agartala, Tripura West - 799 001
Tel. : 0381 - 2342566
STATE - MEGHALAYA
L
SHILLONG
DH Royal Cars
Showroom & Workshop :
Parkview, Fire Brigade,
Shillong - 793 014
Tel. : 0364 - 2520481, 2520477
STATE - SIKKIM
L
GANGTOK
GEN X Motors
Workshop :
C/o Garima Enterprise, P.S. Road, Gangtok - 737 101
Tel. : 03592 - 202515
STATE - MIZORAM
L
AIZAWL
Highland
Showroom & Workshop :
A-L Road, Zemabawk, Aizawl - 796 017
Tel. : 0389 - 2351916
202 Service Network
INTERNATIONAL
L
L
SRI LANKA
Mag City Motor Company Pvt. Ltd.
Showroom & Workshop :
No. 320A, Darley Road,
Colombo - 10, Sri Lanka
Tel. : 0094777410407
BHUTAN
Global Trade
Showroom :
Lkahilham, Changgankha,
Thimphu, Bhutan
Workshop :
Post Box No. 1037, Olarongcchu,
Thimphu, Bhutann
m
NEPAL
SPG Automobiles Pvt. Ltd.
Workshop :
GPO Box 2544, Khumaltar, Lalitpur,
Kathmandu, Nepal
Tel.: 00977-1-4100543
DIESEL
General Motors India Pvt. Ltd.
All information, illustrations and specifications contained in this Owner's Manual are based on
the latest production information available at the time of publication. The right is reserved to
make changes at any time without notice.
24 Hr. Helpline at 1800 3000 8080
24x7 Roadside Assistance at 1800 103 8090 (Toll Free No.) or 0124 - 4388090
Part No.: 28287059
Revision No. 02
Revision Date
08/2014/1,020
DIESEL
Regd. Office : Chandrapura Industrial Estate, Halol - 389 351
Dist. Panchmahals, Gujarat, India. Phone : 91 2676 221000
Customer Assistance Center : Plot No. 15, Echelon Institutional Area,
Sector 32, Gurgaon - 122 001, Haryana, India. Tel.: 91 124 3080000
Works : A-16, MIDC Talegaon Industrial Area (Phase-II),
Near Floriculture Park, Talegaon Navlakh Umbhre Village Road, Tehsil-Maval,
Pune - 410 507, Maharashtra, India. Tel: 91 2114 663939
DIESEL
General Motors India Pvt. Ltd.
All information, illustrations and specifications contained in this Owner's Manual are based on
the latest production information available at the time of publication. The right is reserved to
make changes at any time without notice.
24 Hr. Helpline at 1800 3000 8080
24x7 Roadside Assistance at 1800 103 8090 (Toll Free No.) or 0124 - 4388090
Part No.: 28287059
Revision No. 02
Revision Date
08/2014/1,020
DIESEL
Regd. Office : Chandrapura Industrial Estate, Halol - 389 351
Dist. Panchmahals, Gujarat, India. Phone : 91 2676 221000
Customer Assistance Center : Plot No. 15, Echelon Institutional Area,
Sector 32, Gurgaon - 122 001, Haryana, India. Tel.: 91 124 3080000
Works : A-16, MIDC Talegaon Industrial Area (Phase-II),
Near Floriculture Park, Talegaon Navlakh Umbhre Village Road, Tehsil-Maval,
Pune - 410 507, Maharashtra, India. Tel: 91 2114 663939
DIESEL
General Motors India Pvt. Ltd.
All information, illustrations and specifications contained in this Owner's Manual are based on
the latest production information available at the time of publication. The right is reserved to
make changes at any time without notice.
24 Hr. Helpline at 1800 3000 8080
24x7 Roadside Assistance at 1800 103 8090 (Toll Free No.) or 0124 - 4388090
Part No.: 28287059
Revision No. 02
Revision Date
08/2014/1,020
DIESEL
Regd. Office : Chandrapura Industrial Estate, Halol - 389 351
Dist. Panchmahals, Gujarat, India. Phone : 91 2676 221000
Customer Assistance Center : Plot No. 15, Echelon Institutional Area,
Sector 32, Gurgaon - 122 001, Haryana, India. Tel.: 91 124 3080000
Works : A-16, MIDC Talegaon Industrial Area (Phase-II),
Near Floriculture Park, Talegaon Navlakh Umbhre Village Road, Tehsil-Maval,
Pune - 410 507, Maharashtra, India. Tel: 91 2114 663939
DIESEL
General Motors India Pvt. Ltd.
All information, illustrations and specifications contained in this Owner's Manual are based on
the latest production information available at the time of publication. The right is reserved to
make changes at any time without notice.
24 Hr. Helpline at 1800 3000 8080
24x7 Roadside Assistance at 1800 103 8090 (Toll Free No.) or 0124 - 4388090
Part No.: 28287059
Revision No. 02
Revision Date
08/2014/1,020
DIESEL
Regd. Office : Chandrapura Industrial Estate, Halol - 389 351
Dist. Panchmahals, Gujarat, India. Phone : 91 2676 221000
Customer Assistance Center : Plot No. 15, Echelon Institutional Area,
Sector 32, Gurgaon - 122 001, Haryana, India. Tel.: 91 124 3080000
Works : A-16, MIDC Talegaon Industrial Area (Phase-II),
Near Floriculture Park, Talegaon Navlakh Umbhre Village Road, Tehsil-Maval,
Pune - 410 507, Maharashtra, India. Tel: 91 2114 663939
Download PDF