Compaq | Presario,Presario 1600-XL152 | Specifications | Compaq Presario,Presario 1600-XL152 Specifications

Compaq Presario,Presario 1600-XL152 Specifications
Maintenance and Service
Guide
HP Pavilion zx5000 Notebook PC
HP Pavilion zv5000 Notebook PC
Compaq Presario R3000 Notebook PC Series
HP Compaq Business Notebook nx9100 Series
Document Part Number: 335402-003
July 2004
This guide is a troubleshooting reference used for maintaining
and servicing the notebook. It provides comprehensive
information on identifying notebook features, components, and
spare parts, troubleshooting notebook problems, and performing
notebook disassembly procedures.
© Copyright 2004 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are U.S. registered trademarks of Microsoft
Corporation. Intel and Pentium are trademarks or registered trademarks of
Intel Corporation or its subsidiaries in the United States and other
countries. SD Logo is a trademark of its proprietor. Bluetooth is a
trademark owned by its proprietor and used by Hewlett-Packard Company
under license.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Maintenance and Service Guide
HP Pavilion zx5000 Notebook PC
HP Pavilion zv5000 Notebook PC
Compaq Presario R3000 Notebook PC Series
HP Compaq Business Notebook nx9100 Series
Third Edition July 2004
First Edition February 2004
Document Part Number: 335402-003
Contents
1 Product Description
1.1
1.2
1.3
1.4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3
Power Management. . . . . . . . . . . . . . . . . . . . . . . . . . 1–5
External Components . . . . . . . . . . . . . . . . . . . . . . . . 1–6
Design Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 1–28
2 Troubleshooting
2.1 Computer Setup and Diagnostics Utilities . . . . . . . . 2–2
Using Computer Setup . . . . . . . . . . . . . . . . . . . . . . . 2–3
Selecting from the File Menu . . . . . . . . . . . . . . . . . . 2–4
Selecting from the Security Menu . . . . . . . . . . . . . . 2–5
Selecting from the Advanced Menu . . . . . . . . . . . . . 2–6
2.2 Using Diagnostics for Windows . . . . . . . . . . . . . . . . 2–8
Obtaining, Saving or Printing Configuration
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8
Obtaining, Saving or Printing
Diagnostic Test Information . . . . . . . . . . . . . . . . . . . 2–9
2.3 Troubleshooting Flowcharts . . . . . . . . . . . . . . . . . . 2–11
Flowchart 2.1—Initial Troubleshooting . . . . . . . . . 2–12
Flowchart 2.2—No Power, Part 1. . . . . . . . . . . . . . 2–13
Flowchart 2.3—No Power, Part 2. . . . . . . . . . . . . . 2–14
Flowchart 2.4—No Power, Part 3. . . . . . . . . . . . . . 2–15
Flowchart 2.5—No Power, Part 4. . . . . . . . . . . . . . 2–16
Flowchart 2.6—No Video, Part 1 . . . . . . . . . . . . . . 2–17
Maintenance and Service Guide
iii
Contents
Flowchart 2.7—No Video, Part 2 . . . . . . . . . . . . . .
Flowchart 2.8—Nonfunctioning Port Replicator
(if applicable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flowchart 2.9—No Operating System (OS)
Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flowchart 2.10—No OS Loading, Hard Drive,
Part 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flowchart 2.11—No OS Loading, Hard Drive,
Part 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flowchart 2.12—No OS Loading, Hard Drive,
Part 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flowchart 2.13—No OS Loading,
Diskette Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flowchart 2.14—No OS Loading, CD-ROM or
DVD-ROM Drive . . . . . . . . . . . . . . . . . . . . . . . . . .
Flowchart 2.15—No Audio, Part 1. . . . . . . . . . . . .
Flowchart 2.16—No Audio, Part 2. . . . . . . . . . . . .
Flowchart 2.17—Nonfunctioning Device. . . . . . . .
Flowchart 2.18—Nonfunctioning Keyboard . . . . .
Flowchart 2.19—Nonfunctioning
Pointing Device. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flowchart 2.20—No Network/Modem
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–18
2–19
2–20
2–21
2–22
2–23
2–24
2–25
2–26
2–27
2–28
2–29
2–30
2–31
3 Illustrated Parts Catalog
3.1 Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 3–2
3.2 Major Components—
HP Pavilion zv5000 and zx5000 . . . . . . . . . . . . . . . 3–3
3.3 Major Components—HP Compaq Business
Notebook nx9100 Series
and Compaq Presario R3000 Series . . . . . . . . . . . . 3–15
3.4 Miscellaneous Plastics Kit Components . . . . . . . . . 3–29
3.5 Mass Storage Devices . . . . . . . . . . . . . . . . . . . . . . . 3–30
3.6 Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–32
iv
Maintenance and Service Guide
Contents
4 Removal and Replacement Preliminaries
4.1 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 Service Considerations . . . . . . . . . . . . . . . . . . . . . . .
Plastic Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . .
4.3 Preventing Damage to Removable Drives . . . . . . . .
4.4 Preventing Electrostatic Damage . . . . . . . . . . . . . . .
4.5 Packaging and Transporting Precautions . . . . . . . . .
4.6 Workstation Precautions . . . . . . . . . . . . . . . . . . . . . .
4.7 Grounding Equipment and Methods . . . . . . . . . . . . .
4–1
4–2
4–2
4–2
4–3
4–4
4–5
4–6
4–7
5 Removal and Replacement Procedures
5.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2
5.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . 5–3
5.3 Preparing the Notebook for Disassembly . . . . . . . . . 5–5
5.4 Notebook Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–10
5.5 Memory Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–11
5.6 Combination Drive . . . . . . . . . . . . . . . . . . . . . . . . . 5–16
5.7 Heat Sink. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–21
5.8 Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–27
5.9 Strip Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–30
5.10 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–32
5.11 Modem Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–34
5.12 Mini PCI Communications Card. . . . . . . . . . . . . . 5–35
5.13 Primary Memory Module . . . . . . . . . . . . . . . . . . . 5–37
5.14 Display Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 5–39
5.15 Base Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–47
5.16 Speaker Assembly. . . . . . . . . . . . . . . . . . . . . . . . . 5–50
5.17 LED Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–53
5.18 TouchPad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–57
5.19 System Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–64
5.20 Fan Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–76
5.21 Upper Logic Audio Board. . . . . . . . . . . . . . . . . . . 5–79
Maintenance and Service Guide
v
Contents
6 Specifications
A Connector Pin Assignments
B Power Cord Set Requirements
General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . B–1
Country-Specific Requirements . . . . . . . . . . . . . . . . . . . . B–2
C Screw Listing
Index
vi
Maintenance and Service Guide
1
Product Description
The HP Pavilion zv5000 and zx5000 notebook PCs, the
HP Compaq Business Notebook nx9100 Series, and
the Compaq Presario R3000 notebook PC offer advanced
modularity; a 64-bit Mobile Intel® Pentium® 4 processor,
64-bit AMD Athlon 64 processor, or 32-bit AMD XP-M
processor; an ATI MOBILITY RADEON 9600 Pro graphics
controller with 64 or 32 MB of discrete video memory; and
extensive multimedia support.
Maintenance and Service Guide
1–1
Product Description
HP Pavilion zv5000 and zx5000 Notebooks
HP Compaq Business Notebook nx9100 Series and
Compaq Presario R3000 Notebooks
1–2
Maintenance and Service Guide
Product Description
1.1 Features
■
Mobile Intel Pentium 4 3.06-, 2.80-, 2.66-, and 2.40-GHz
processors, all with 512-KB L2 cache, varying by notebook
model
- or Intel Pentium 4 DT 3.20-, 3.06-, 2.80-, 2.66-, and 2.40-GHz
processors, all with 256-KB L2 cache, varying by notebook
model
- or AMD Athlon 64 1.8-, 2.0-, and 2.2-GHz processors, all with
1-MB L2 cache, varying by notebook model
- or AMD Athlon XP-M 1.6-GHz processor with 256-KB L2
cache
■
15.4-inch wide UXGA (1600 × 1200), 15.4-inch wide
XGA (1024 × 768), or 15.0-inch XGA (1024 × 768)
TFT displays with over 16.7 million colors, varying by
notebook model
■
ATI MOBILITY RADEON 9600 Pro graphics controller
with 64 or 32 MB of video memory, varying by notebook
model
■
80-, 60-, 40-, or 30-GB high-capacity hard drive, varying by
notebook model
■
256-MB DDR synchronous DRAM (SDRAM) at 333 MHz,
expandable to 2.0 GB
■
Microsoft® Windows® XP Home Edition and Microsoft
Windows XP Professional
■
Full-size Windows keyboard with integrated numeric keypad
■
TouchPad pointing device
■
Integrated 5-in-1 Memory Reader slot
■
Integrated 10/100/1000BaseT Ethernet local area network
(LAN) NIC with RJ-45 connector
Maintenance and Service Guide
1–3
Product Description
■
Integrated wireless support for Mini PCI 802.11a/b/g LAN
devices
■
2 Type II PC Card slots with support for both 32-bit
(CardBus) and 16-bit PC Cards
■
External 120-watt AC adapter and power cord
■
12- or 8-cell Li-Ion battery pack
■
Stereo speakers
■
Support for the following devices in the MultiBay:
❏ 24X Max DVD+RW/R and CD-RW Combo Drive
❏ 24X Max DVD/CD-RW Combo Drive
❏ 8X Max DVD-ROM Drive
❏ 24X Max CD-ROM Drive
❏ 8-cell Li-Ion battery pack
■
Connectors for:
❏ RJ-11 (modem)
❏ RJ-45 network interface card (NIC)
❏ Universal Serial Bus (USB) v. 2.0 (3)
❏ S-Video
❏ Parallel
❏ External monitor
❏ DC power
❏ Docking
❏ 1394 digital
❏ Microphone
❏ Stereo speaker/headphone
■
1–4
Infrared port
Maintenance and Service Guide
Product Description
1.2 Power Management
The notebook comes with power management features that
conserve power and extend battery operating time. The notebook
supports the following power management features:
■
Standby
■
Hibernation
■
User-customizable settings
■
Hotkeys for setting level of performance
■
Battery calibration
■
Lid switch standby/resume
■
Power button
■
Advanced Configuration and Power Interface (ACPI)
compliance
Maintenance and Service Guide
1–5
Product Description
1.3 External Components
The external components on the front and right side of the
HP Pavilion zv5000 and zx5000 notebooks are shown below
and described in Table 1-1.
Front and Right-Side Components—HP Pavilion zv5000 and
zx5000 Notebooks
1–6
Maintenance and Service Guide
Product Description
Table 1-1
Front and Right-Side Components
HP Pavilion zv5000 and zx5000 Notebooks
Item
Component
Function
1
Power/standby LED
On: Notebook is turned on.
Blinking: Notebook is in Standby.
Off: Notebook is off or in Hibernation.
2
IDE (Integrated Drive
Electronics) LED; also
referred to as the hard
drive/optical drive
activity LED
On: The internal hard drive or the optical
drive is being accessed.
3
Display release latch
Opens the notebook.
4
Battery LED
On: A battery pack is charging.
Blinking: Battery pack has reached a
low-battery condition.
Off: AC power is applied with battery pack
either fully charged or not installed, or no
AC power is applied.
5
Stereo speakers (2)
Produce stereo sound.
6
Volume increase button Increases system volume.
7
Mute button
Mutes system volume. An LED comes on
when the button is pushed in, and the sound
is muted.
8
Volume decrease
button
Decreases system volume.
Maintenance and Service Guide
1–7
Product Description
Front and Right-Side Components—HP Pavilion zv5000 and
zx5000 Notebooks (Continued)
1–8
Maintenance and Service Guide
Product Description
Table 1-1
Front and Right-Side Components
HP Pavilion zv5000 and zx5000 Notebooks (Continued)
Item
Component
Function
9
Audio-out
(headphone) jack
Connects an optional headphone, headset,
or powered stereo speakers. Also connects
the audio function of an audio/video device,
such as a television or VCR.
-
Audio-in
(microphone) jack
Connects an optional monaural microphone.
q
USB port
Connects USB 1.1- and 2.0-compliant
devices to the notebook using a standard
USB cable.
w
1394 connector
(select models)
Connects an optional IEEE 1394 device,
such as a camcorder.
e
Infrared port
(select models)
Provides wireless communication between
the notebook and an optional IrDA-compliant
device.
r
Expansion port
Connects an optional port replicator.
t
RJ-45 (network) jack
Connects an optional network cable.
y
S-Video jack
Connects an optional S-Video device, such
as a television, VCR, camcorder, overhead
projector, or video capture card.
Maintenance and Service Guide
1–9
Product Description
The external components on the front and right side of
the HP Compaq Business Notebook nx9100 Series and
Compaq Presario R3000 notebook are shown below
and described in Table 1-2.
Front and Right-Side Components—HP Compaq Business
Notebook nx9100 Series and Compaq Presario R3000 Notebook
1–10
Maintenance and Service Guide
Product Description
Table 1-2
Front and Right-Side Components
HP Compaq Business Notebook nx9100 Series
and Compaq Presario R3000
Item
Component
Function
1
Stereo speakers (2)
Produce stereo sound.
2
Power/standby LED
On: Notebook is turned on.
Blinking: Notebook is in Standby.
Off: Notebook is off or in Hibernation.
3
Display release latch
Opens the notebook.
4
Battery LED
On: A battery pack is charging.
Blinking: Battery pack has reached a
low-battery condition.
Off: AC power is applied with battery pack
either fully charged or not installed, or no
AC power is applied.
5
IDE (Integrated Drive
Electronics) LED; also
referred to as the hard
drive/optical drive
activity LED
On: The internal hard drive or the optical
drive is being accessed.
6
Wireless button
Turns optional internal wireless device(s)
on or off.
7
Wireless LED
On: At least one optional internal wireless
device is active.
Off: No wireless device is active.
8
Volume buttons (2)
Decrease and increase system volume.
■ To decrease volume, use left button.
■ To increase volume, use right button.
9
Mute button
Mutes system volume. An LED comes on
when the button is pushed in, and the sound
is muted.
Maintenance and Service Guide
1–11
Product Description
Front and Right-Side Components—HP Compaq Business
Notebook nx9100 Series and Compaq Presario R3000
(Continued)
1–12
Maintenance and Service Guide
Product Description
Table 1-2
Front and Right-Side Components
HP Compaq Business Notebook nx9100 Series and
Compaq Presario R3000 (Continued)
Item
Component
Function
-
Audio-out
(headphone) jack
Connects an optional headphone, headset,
or power stereo speakers. Also connects the
audio function of an audio/video device, such
as a television or VCR.
q
Audio-in
(microphone) jack
Connects an optional monaural microphone.
w
USB port
Connects USB 1.1- and 2.0-compliant
devices to the notebook using a standard
USB cable.
e
1394 connector
(select models)
Connects an optional IEEE 1394 device,
such as a camcorder.
r
Infrared port
(select models)
Provides wireless communication between
the notebook and an optional IrDA-compliant
device.
t
Vents (2)
Allow airflow to cool internal components.
Ä
Maintenance and Service Guide
This notebook is designed to run
demanding applications at full power.
As a result of increased power
consumption, it is normal for the
notebook to feel warm or hot when
used continuously. To avoid potential
discomfort or burns, do not block the
air vents or use the notebook on your
lap for extended periods. The
notebook complies with the
user-accessible surface temperature
limits defined by the International
Standard for Safety of Information
Technology Equipment (IEC-60950).
1–13
Product Description
Table 1-2
Front and Right-Side Components
HP Compaq Business Notebook nx9100 Series and
Compaq Presario R3000 (Continued)
Item
Component
Function
y
module port
Connects an optional port replicator.
u
RJ-45 (network) jack
Connects an optional network cable.
i
S-Video jack
Connects an optional S-Video device, such
as a television, VCR, camcorder, overhead
projector, or video capture card.
The notebook rear and left-side components are shown below and
described in Table 1-3.
notebook rear and left-side component locations are
✎ The
identical for the HP Pavilion zv5000 and zx5000, the
HP Compaq Business Notebook nx9100 Series, and
Compaq Presario R3000 Series. Notebook appearance
varies by model.
Rear and Left-Side Components
1–14
Maintenance and Service Guide
Product Description
Table 1-3
Rear and Left-Side Components
Item
Component
Function
1
AC power connector
Connects an AC adapter.
2
Exhaust vent
Allows airflow to cool internal components.
Ä
This notebook is designed to run
demanding applications at full power.
As a result of increased power
consumption, it is normal for the
notebook to feel warm or hot when
used continuously. To avoid potential
discomfort or burns, do not block the
air vents or use the notebook on your
lap for extended periods. The
notebook complies with the
user-accessible surface temperature
limits defined by the International
Standard for Safety of Information
Technology Equipment (IEC-60950).
3
External monitor port
Connects an optional external monitor or
overhead projector.
4
Parallel connector
Connects an optional parallel device,
such as an external diskette drive bay or
a printer.
5
RJ-11 (modem) jack
(select models)
Connects a modem cable.
6
Security cable slot
Attaches an optional security cable to the
notebook.
Ä
Maintenance and Service Guide
Security solutions are designed to act
as deterrents. These deterrents may
not prevent a product from being
mishandled or stolen.
1–15
Product Description
notebook rear and left-side component locations
✎ The
are identical for the HP Pavilion zv5000 and zx5000,
HP Compaq Business Notebook nx9100 Series, and
Compaq Presario R3000 models. Notebook appearance
varies by model.
Rear and Left-Side Components
1–16
Maintenance and Service Guide
Product Description
Table 1-3
Rear and Left-Side Components (Continued)
Item
Component
Function
7
5-in-1 Memory Reader
LED (select models)
On: The 5-in-1 Memory Reader slot is
accessing a digital memory card.
8
5-in-1 Memory Reader
slot (select models)
Supports 5 types of optional digital memory
cards: SD Memory Card, MultiMediaCard,
SmartMedia Card, Memory Stick, and
Memory Stick Pro.
9
PC Card slot (1 or
2 slots, select models)
Supports an optional Type I or Type II 32-bit
(CardBus) or 16-bit PC Card.
-
PC Card eject button
(one or 2 buttons,
select models)
Ejects an optional PC Card from the
PC Card slot.
q
USB port (2)
Connect USB 1.1- and 2.0-compliant devices
to the notebook using a standard USB cable.
w
Optical drive bay
Holds a CD-ROM Drive, DVD-ROM Drive,
DVD+RW/R and CD-RW Combo Drive, or
DVD/CD-RW Combo Drive.
e
3 drive configurations:
optional HP USB Digital
Drive, optional diskette
drive, or no drive
■ Digital Bay: Supports an optional
pocket-sized HP USB Digital Drive.
■ Diskette Drive: Supports a standard
1.4-MB diskette.
■ No drive: No drive bay is installed.
Maintenance and Service Guide
1–17
Product Description
The notebook keyboard components are shown below and
described in Table 1-4.
notebook keyboard component locations are identical for
✎ The
the HP Pavilion zv5000 and zx5000, HP Compaq Business
Notebook nx9100 Series, and Compaq Presario R3000 Series.
Notebook appearance varies by model.
Keyboard Components
1–18
Maintenance and Service Guide
Product Description
Table 1-4
Keyboard Components
Item
Component
Function
1
fn key
Combines with the function keys to perform
additional system and application tasks.
2
caps lock key
Enables caps lock and turns on the
caps lock LED.
3
f1 through f12
function keys
Perform system and application tasks. When
combined with the fn key, the function keys f1
and f3 through f12 perform additional tasks
as hotkeys.
4
num lock key
Enables numeric lock and the internal
keypad.
5
Internal keypad
Can be used like the keys on an external
numeric keypad.
6
Arrow keys
Move the cursor around the screen.
7
Windows
applications key
Displays a shortcut menu for items beneath
the pointer.
8
Windows logo key
Displays the Windows Start menu.
Maintenance and Service Guide
1–19
Product Description
The top components of the HP Pavilion zv5000 and zx5000
notebooks are shown below and described in Table 1-5.
Top Components—HP Pavilion zv5000 and zx5000 Notebooks
1–20
Maintenance and Service Guide
Product Description
Table 1-5
Top Components
HP Pavilion zv5000 and zx5000 Notebooks
Item
Component
Function
1
Power button
When the notebook is:
■ Off, press and release to turn on the
notebook.
■ In Standby, press and release to exit
Standby.
■ In Hibernation, press and release to exit
Hibernation.
If the system has stopped responding and
Windows shutdown procedures cannot be
used, press and hold for 5 seconds to turn
off the notebook.
2
Caps lock LED
On: Caps lock is on.
3
Num lock LED
On: Num lock is on and or the embedded
numeric keypad is enabled.
4
Picture button
Launches a digital imaging application.
5
Media button
Launches a multimedia application.
6
Wireless button
Turns optional internal wireless device(s)
on or off.
7
Internet button
Launches the Internet.
Maintenance and Service Guide
1–21
Product Description
Top Components—HP Pavilion zv5000 and zx5000 Notebooks
(Continued)
1–22
Maintenance and Service Guide
Product Description
Table 1-5
Top Components
HP Pavilion zv5000 and zx5000 Notebooks (Continued)
Item
Component
Function
8
Display lid switch
■ If the notebook is closed while on, turns
off the display.
■ If the notebook is opened while in
Standby, turns on the notebook (resumes
from Standby).
9
Exhaust vents (2)
Allows airflow to cool internal components.
Ä
This notebook is designed to run
demanding applications at full power.
As a result of increased power
consumption, it is normal for the
notebook to feel warm or hot when
used continuously. To avoid potential
discomfort or burns, do not block the
air vents or use the notebook on your
lap for extended periods. The
notebook complies with the
user-accessible surface temperature
limits defined by the International
Standard for Safety of Information
Technology Equipment (IEC-60950).
-
TouchPad button
Turns the TouchPad on or off.
q
TouchPad LED
On: TouchPad is enabled.
w
TouchPad scroll area
Scrolls upward or downward.
e
Left and right TouchPad
buttons
Function like the left and right buttons on an
external mouse.
r
TouchPad
Moves the pointer and selects or activates
items on the screen.
t
5-in-1 Memory Reader
LED (select models)
On: The 5-in-1 Memory Reader slot is
accessing a digital memory card.
Maintenance and Service Guide
1–23
Product Description
The top components of the HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 are shown below
and described in Table 1-6.
Top Components—HP Compaq Business Notebook nx9100 Series
and Compaq Presario R3000
1–24
Maintenance and Service Guide
Product Description
Table 1-6
Top Components
HP Compaq Business Notebook nx9100 Series
and Compaq Presario R3000
Item
Component
Function
1
Power button
When the notebook is:
■ Off, press the button and release to turn
on the notebook.
■ In Standby, press the button and release
to exit Standby.
■ In Hibernation, press the button and
release to exit Hibernation.
If the system has stopped responding
and Windows shutdown procedures
cannot be used, press and hold the button
for 5 seconds to turn off the notebook.
2
Caps lock LED
On: Caps lock is on.
3
Num lock LED
On: Num lock is on and the embedded
numeric keypad is enabled.
4
Display lid switch
■ If the notebook is closed while on, turns
off the display.
■ If the notebook is opened while in
Standby, turns on the notebook (resumes
from Standby).
5
TouchPad button
Turns the TouchPad on or off.
6
TouchPad scroll area
Scrolls upward or downward.
7
Left and right TouchPad
buttons
Function like the left and right buttons on
an external mouse.
8
TouchPad
Moves the pointer and selects or activates
items on the screen.
9
TouchPad LED
On: TouchPad is enabled.
Maintenance and Service Guide
1–25
Product Description
The external components on the bottom of the notebook are
shown below and described in Table 1-7.
notebook bottom component locations are identical for
✎ The
the HP Pavilion zv5000 and zx5000, HP Compaq Business
Notebook nx9100 Series, and Compaq Presario R3000 Series.
Notebook appearance varies by model.
Bottom Components
1–26
Maintenance and Service Guide
Product Description
Table 1-7
Bottom Components
Item
Component
Function
1
Exhaust vents (2)
Allow airflow to cool internal components.
Ä
2
Fan vents (2)
To prevent overheating, do not
obstruct vents. Do not allow a hard
surface, such as an adjoining printer,
or a soft surface, such as bedding or
clothing, to block airflow.
Provides airflow to cool internal components.
Ä
To prevent overheating, do not
obstruct vents. Do not allow a hard
surface, such as an adjoining printer,
or a soft surface, such as bedding or
clothing, to block airflow.
3
Hard drive bay
Holds the primary hard drive.
4
Memory module
compartment
Contains one memory slot for an optional
256-, 512-, or 1024-MB memory module.
5
Battery release latch
Releases a battery pack from the
battery bay.
6
Battery bay
Holds the battery pack. (Battery type varies
by notebook model.)
Maintenance and Service Guide
1–27
Product Description
1.4 Design Overview
This section presents a design overview of key parts and features
of the notebook. Refer to Chapter 3, “Illustrated Parts Catalog,”
to identify replacement parts, and Chapter 5, “Removal and
Replacement Procedures,” for disassembly steps. The system
board provides the following device connections:
Ä
■
Memory module
■
Mini PCI communications devices
■
Hard drive
■
Display
■
Keyboard and TouchPad
■
Audio
■
Mobile Intel Pentium 4, AMD Athlon 64, or AMD Athlon
XP-M processor
■
Fan
■
PC Card
CAUTION: To properly ventilate the notebook, allow at least a 7.6-cm
(3-inch) clearance on the left and right sides of the notebook.
The notebook uses an electric fan for ventilation. The fan is
controlled by a temperature sensor and is designed to be turned
on automatically when high temperature conditions exist. These
conditions can be caused by high external temperatures, heavy
system power consumption, certain power management/battery
conservation configurations, battery fast charging, and some
software applications. Exhaust air is displaced through the
ventilation grill located on the left side of the notebook.
1–28
Maintenance and Service Guide
2
Troubleshooting
Å
WARNING: Only authorized technicians trained by HP should
repair this equipment. All troubleshooting and repair procedures are
detailed to allow only subassembly/module level repair. Because of the
complexity of the individual boards and subassemblies, do not attempt
to make repairs at the component level or modifications to any printed
wiring board. Improper repairs can create a safety hazard. Any
indication of component replacement or printed wiring board
modification may void any warranty or exchange allowances.
Maintenance and Service Guide
2–1
Troubleshooting
2.1 Computer Setup and Diagnostics
Utilities
The notebook features 2 system management utilities:
■
Computer Setup—A system information and customization
utility that can be used even when your operating system is
not working or will not load. This utility includes settings that
are not available in Microsoft Windows.
■
Diagnostics for Windows—A system information and
diagnostic utility that is used within the Windows operating
system. Use this utility whenever possible to
❏ Display system information.
❏ Test system components.
❏ Troubleshoot a device configuration problem in
Windows XP Professional or Windows XP Home Edition.
to configure a device connected to a
✎ ItUSBis notportnecessary
on the notebook or to an optional port replicator.
2–2
Maintenance and Service Guide
Troubleshooting
Using Computer Setup
Information and settings in Computer Setup are accessed
from the File, Security, or Advanced menus:
1. Turn on or restart the notebook. Press f10 while the
“f10 = ROM-Based Setup” message is displayed in
the lower-left corner of the screen.
❏ To change the language, press f2.
❏ To view navigation information, press f1.
❏ To return to the Computer Setup menu, press esc.
2. Select the File, Security, or Advanced menu.
3. To close Computer Setup and restart the notebook:
❏ Select File > Save Changes and Exit and press enter.
- or ❏ Select File > Ignore Changes and Exit and press enter.
4. When you are prompted to confirm your action, press f10.
Maintenance and Service Guide
2–3
Troubleshooting
Selecting from the File Menu
Table 2-1
File Menu
Select
To Do This
System Information
■ View identification information about the
notebook, a port replicator, and any
battery packs in the system.
■ View specification information about the
processor, memory and cache size, and
system ROM.
Save to Floppy
Save system configuration settings to a diskette.
Restore from Floppy
Restore system configuration settings from a
diskette.
Restore Defaults
Replace configuration settings in Computer Setup
with factory default settings. Identification
information is retained.
Ignore Changes and Exit
Cancel changes entered during the current
session, and then exit and restart the notebook.
Save Changes and Exit
Save changes entered during the current session,
and then exit and restart the notebook.
2–4
Maintenance and Service Guide
Troubleshooting
Selecting from the Security Menu
Table 2-2
Security Menu
Select
To Do This
Setup Password
Enter, change, or delete a Setup password.
The Setup password is called an administrator
password in Computer Security, a program
accessed from the Windows Control Panel.
Power-on Password
Enter, change, or delete a power-on password.
DriveLock Passwords
Enable/disable DriveLock; change a DriveLock
User or Master password.
Settings are accessible only
✎ DriveLock
when you enter Computer Setup by turning
on (not restarting) the notebook.
Password Options
(Password options can be
selected only when a
power-on password has
been set.)
Enable/disable:
■ QuickLock
■ QuickLock on Standby
■ QuickBlank
enable QuickLock on Standby or
✎ To
QuickBlank, you must first enable
QuickLock.
Device Security
Enable/disable:
■ Ports or diskette drives*
■ Diskette write*
■ CD-ROM or diskette startup
for a DVD-ROM can be entered in
✎ Settings
the CD-ROM field.
System IDs
Enter identification numbers for the notebook,
a port replicator, and all battery packs in
the system.
*Not applicable to SuperDisk LS-120 drives.
Maintenance and Service Guide
2–5
Troubleshooting
Selecting from the Advanced Menu
Table 2-3
Advanced Menu
Select
To Do This
Language
Change the Computer Setup language.
Boot Options
Enable/disable:
■ QuickBoot, which starts the notebook more
quickly by eliminating some startup tests.
(If you suspect a memory failure and want
to test memory automatically during startup,
disable QuickBoot.)
■ MultiBoot, which sets a startup sequence that
can include most bootable devices and media
in the system.
Device Options
■ Enable/disable the embedded numeric keypad
at startup.
■ Enable/disable multiple standard pointing
devices at startup. (To set the notebook to
support only a single, usually nonstandard,
pointing device at startup, select Disable.)
■ Enable/disable USB legacy support for a
USB keyboard. (When USB legacy support
is enabled, the keyboard works even when
a Windows operating system is not loaded.)
■ Set an optional external monitor or overhead
projector connected to a video card in a
Port Replicator as the primary device. (When
the notebook display is set as secondary,
the notebook must be shut down before it is
undocked from a port replicator.)
2–6
Maintenance and Service Guide
Troubleshooting
Table 2-3
Advanced Menu (Continued)
Select
To Do This
Device Options (continued)
■ Change the parallel port mode from Enhanced
Parallel Port (EPP, the default setting) to
standard, bidirectional EPP, or Enhanced
Capabilities Port (ECP).
■ Set video-out mode to NTSC (default), PAL,
NTSC-J, or PAL-M.*
■ Enable/disable all settings in the SpeedStep
window. (When Disable is selected, the
notebook runs in Battery Optimized mode.)
■ Specify how the notebook recognizes multiple
identical port replicators that are identically
equipped. Select Disable to recognize the
port replicators as a single port replicator;
select Enable to recognize the port replicators
individually, by serial number.
■ Enable/disable the reporting of the processor
serial number by the processor to the software.
HDD Self Test Options
Run a quick comprehensive self-test on hard
drives in the system that support the test features.
*Video modes vary even within regions. However, NTSC is common in North
America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and
PAL-M, in Brazil. Other South and Central American regions can use NTSC,
PAL, or PAL-M.
Maintenance and Service Guide
2–7
Troubleshooting
2.2 Using Diagnostics for Windows
When you access Diagnostics for Windows, a scan of all system
components is displayed on the screen before the diagnostics
window opens.
You can display more or less information from anywhere within
Diagnostics for Windows by selecting Level on the menu bar.
Diagnostics for Windows is designed to test HP components. If
third-party components are tested, the results might be
inconclusive.
Obtaining, Saving or Printing
Configuration Information
1. Access Diagnostics for Windows by selecting Start >
Settings > Control Panel > Diagnostics for Windows.
2. Select Categories, and then select a category from the
drop-down list.
❏ To save the information, select File > Save As.
❏ To print the information, select File > Print.
3. To close Diagnostics for Windows, select File > Exit.
2–8
Maintenance and Service Guide
Troubleshooting
Obtaining, Saving or Printing
Diagnostic Test Information
1. Access Diagnostics for Windows by selecting Start >
Settings > Control Panel > Diagnostics for Windows.
2. Select the Test tab.
3. In the scroll box, select the category or device you want
to test.
4. Select a test type:
❏ Quick Test—Runs a quick, general test on each device
in a selected category.
❏ Complete Test—Performs maximum testing on each
device in a selected category.
❏ Custom Test—Performs maximum testing on a selected
device.
◆
To run all tests for your selected device, select the
Check All button.
◆
To run only the tests you select, select the Uncheck
All button, and then select the check box for each test
you want to run.
5. Select a test mode:
❏ Interactive Mode—Provides maximum control over
the testing process. You determine whether the test was
passed or failed. You might be prompted to insert or
remove devices.
❏ Unattended Mode—Does not display prompts. If errors
are found, they are displayed when testing is complete.
Maintenance and Service Guide
2–9
Troubleshooting
6. Select the Begin Testing button.
7. Select a tab to view a test report:
❏ Status tab—Summarizes the tests run, passed, and
failed during the current testing session.
❏ Log tab—Lists tests run on the system, the number of
times each test has run, the number of errors found on
each test, and the total run time of each test.
❏ Error tab—Lists all errors found in the notebook along
with the corresponding error codes.
8. Select a tab to save the report:
❏ Log tab—Select the Save button.
❏ Error tab—Select the Save button.
9. Select a tab to print the report:
Log tab—Select File > Save As, and then print the file from
your folder.
2–10
Maintenance and Service Guide
Troubleshooting
2.3 Troubleshooting Flowcharts
Table 2-4
Troubleshooting Flowcharts Overview
2.1
“Flowchart 2.1—Initial Troubleshooting”
2.2
“Flowchart 2.2—No Power, Part 1”
2.3
“Flowchart 2.3—No Power, Part 2”
2.4
“Flowchart 2.4—No Power, Part 3”
2.5
“Flowchart 2.5—No Power, Part 4”
2.6
“Flowchart 2.6—No Video, Part 1”
2.7
“Flowchart 2.7—No Video, Part 2”
2.8
“Flowchart 2.8—Nonfunctioning Port Replicator (if applicable)”
2.9
“Flowchart 2.9—No Operating System (OS) Loading”
2.10
“Flowchart 2.10—No OS Loading, Hard Drive, Part 1”
2.11
“Flowchart 2.11—No OS Loading, Hard Drive, Part 2”
2.12
“Flowchart 2.12—No OS Loading, Hard Drive, Part 3”
2.13
“Flowchart 2.13—No OS Loading, Diskette Drive”
2.14
“Flowchart 2.14—No OS Loading, CD-ROM or DVD-ROM Drive”
2.15
“Flowchart 2.15—No Audio, Part 1”
2.16
“Flowchart 2.16—No Audio, Part 2”
2.17
“Flowchart 2.17—Nonfunctioning Device”
2.18
“Flowchart 2.18—Nonfunctioning Keyboard”
2.19
“Flowchart 2.19—Nonfunctioning Pointing Device”
2.20
“Flowchart 2.20—No Network/Modem Connection”
Maintenance and Service Guide
2–11
Troubleshooting
Flowchart 2.1—Initial Troubleshooting
Begin
troubleshooting.
N
Go to
“Flowchart 2.2—No
Power, Part 1.”
Is there
power?
Y
N
Check
LED board,
speaker
connections.
Beeps,
LEDs, or error
messages?
N
Y
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
All drives
working?
N
Go to
“Flowchart
2.6—No Video,
Part 1.”
Is there video?
(no boot)
Y
N
Keyboard/
pointing
device
working?
Y
N
Go to
“Flowchart 2.9—No
Operating System
(OS) Loading.”
Is the OS
loading?
Y
N
Connecting
to network
or modem?
Y
N
Is there
sound?
Y
2–12
Go to
“Flowchart
2.15—No Audio,
Part 1.”
Go to
“Flowchart
2.18—Nonfunctioning
Keyboard,”
or “Flowchart
2.19—Nonfunctioning
Pointing Device.”
Y
Go to
“Flowchart 2.20—No
Network/Modem
Connection.”
End
Maintenance and Service Guide
Troubleshooting
Flowchart 2.2—No Power, Part 1
No power
(power LED
is off).
Remove from
port replicator
(if applicable).
N
N
Power up
on battery
power?
Go to
“Flowchart 2.3—No
Power, Part 2.”
Power up
on battery
power?
*Reset
power.
Y
Y
N
N
Power up
on AC
power?
Power up
on AC
power?
*Reset
power.
Go to
“Flowchart 2.4—No
Power, Part 3.”
Y
Y
Y
Power up in
port replicator?
Done
N
1. Reseat the power cables in the port replicator
and at the AC outlet.
2. Ensure that the AC power source is active.
3. Ensure that the power strip is working.
Y
Done
*NOTES:
1. On some models, there is a separate
reset button.
2. On some models, the notebook can be
reset using the Standby switch and either
the lid switch or the main power switch.
N
Power up
in port replicator?
Maintenance and Service Guide
Go to
“Flowchart
2.8—Nonfunctioning
Port Replicator (if
applicable).”
2–13
Troubleshooting
Flowchart 2.3—No Power, Part 2
Continued from
“Flowchart 2.2—No
Power, Part 1.”
Visually check for
debris in battery
socket and clean
if necessary.
Y
Power on?
Done
N
Check battery by
recharging it,
moving it to
another notebook,
or replacing it.
N
Replace
power supply
(if applicable).
Power on?
Y
N
Done
Power on?
Go to
“Flowchart 2.4—No
Power, Part 3.”
Y
Done
2–14
Maintenance and Service Guide
Troubleshooting
Flowchart 2.4—No Power, Part 3
Continued from
“Flowchart 2.3—No
Power, Part 2.”
Plug directly
into AC outlet.
Y
Power
LED on?
Done
N
Reseat AC adapter
in notebook and
at power source.
Y
Done
Power on?
N
External
N
Try different
outlet.
Power outlet
active?
Y
Internal or
external AC
adapter?
Internal
Replace external
AC adapter.
N
Go to
“Flowchart 2.5—No
Power, Part 4.”
Replace
power cord.
Power on?
Y
Y
Done
Power on?
Done
N
Maintenance and Service Guide
2–15
Troubleshooting
Flowchart 2.5—No Power, Part 4
Continued from
“Flowchart 2.4—No
Power, Part 3.”
Open
notebook.
Y
Reseat loose
components and
boards and
replace damaged
items.
Loose or
damaged
parts?
N
Close
notebook and
retest.
N
Power on?
Y
Replace the following items (if applicable) in the
order given. Check notebook operation after each
of the 2 following replacement steps:
1. Internal DC-DC converter, processor, and
system board*
2. Internal AC adapter
*NOTE: Replace these items as a set to prevent
shorting out among components.
Done
2–16
Maintenance and Service Guide
Troubleshooting
Flowchart 2.6—No Video, Part 1
No video.
Port
replicator
Stand-alone
or
Port replicator?
Go to
“Flowchart 2.7—No
Video, Part 2.”
*NOTE: To change from internal to
external display, use the hotkey
combination.
Stand-alone
Internal or
external
display*?
Y
Adjust
brightness.
Internal
Video OK?
N
External
A
Adjust brightness.
Done
Press lid
switch to ensure
operation.
Y
Y
Video OK?
Video OK?
Done
N
Done
N
Replace the following one at a time. Test after each replacement.
1. Cable between notebook and notebook display (if applicable)
2. Inverter board (if applicable)
3. Display
4. System board
Check for bent
pins on cable.
N
Video OK?
N
Try
another
display.
Y
Internal and
external
video OK?
Replace
system
board.
Y
Done
Maintenance and Service Guide
Done
2–17
Troubleshooting
Flowchart 2.7—No Video, Part 2
Continued from
“Flowchart 2.6—No
Video, Part 1.”
Remove
notebook from port
replicator,
if connected.
Adjust
display
brightness.
Check brightness
of external
monitor.
N
Y
Go to “A” in
“Flowchart 2.6—No
Video, Part 1.”
Video OK?
Y
Video OK?
Done
N
Check that notebook is properly
seated in port replicator, for
bent pins on cable, and for
monitor connection.
Try another
external
monitor.
Y
Video OK?
N
Y
Internal
and external
video OK?
Done
Done
N
Adjust external
monitor display.
2–18
Go to
“Flowchart
2.8—Nonfunctioning
Port Replicator (if
applicable).”
Maintenance and Service Guide
Troubleshooting
Flowchart 2.8—Nonfunctioning
Port Replicator (if applicable)
Nonfunctioning
port replicator.
Reseat power
cord in port
replicator and
power outlet.
Check voltage
setting on port
replicator.
Reinstall
notebook into port
replicator.
Y
Reset monitor
cable connector at
port replicator.
Port replicator
operating?
N
Y
Port replicator
operating?
Done
Done
N
Remove
notebook, reseat
all internal parts,
and replace any
damaged items in
port replicator.
Maintenance and Service Guide
Replace the following port replicator
components one at a time. Check
notebook operation after each
replacement.
1. Power supply
2. I/O board
3. Backplane board
4. Switch box
5. port replicator motor mechanism
2–19
Troubleshooting
Flowchart 2.9—No Operating System (OS)
Loading
No OS
loading.*
Reseat power
cord in
port replicator
and
power outlet.
No OS loading from hard drive,
go to “Flowchart 2.10—No OS Loading,
Hard Drive, Part 1.”
No OS loading from diskette drive,
go to “Flowchart 2.13—No OS Loading,
Diskette Drive.”
No OS loading from CD-ROM or
DVD-ROM drive,
go to “Flowchart 2.14—No OS Loading,
CD-ROM or DVD-ROM Drive.”
No OS loading from network,
go to “Flowchart 2.20—No Network/Modem
Connection.”
*NOTE: Before beginning troubleshooting, always
check cable connections, cable ends, and drives
for bent or damaged pins.
2–20
Maintenance and Service Guide
Troubleshooting
Flowchart 2.10—No OS Loading, Hard
Drive, Part 1
OS not
loading from
hard drive.
Y
Nonsystem
disk message?
N
Go to
“Flowchart
2.11—No OS
Loading, Hard
Drive, Part 2.”
Reseat
external
hard drive.
Y
OS loading?
Done
N
N
Boot
from
CD?
N
Y
Go to
“Flowchart
2.13—No OS
Loading,
Diskette Drive.”
Boot
from
diskette?
Check the Setup
utility for correct
booting order.
Y
N
Change boot
priority through
the Setup utility
and reboot.
Boot
from
hard drive?
N
Y
Boot
from
hard drive?
Done
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Y
Maintenance and Service Guide
2–21
Troubleshooting
Flowchart 2.11—No OS Loading, Hard Drive,
Part 2
Continued from
“Flowchart
2.10—No OS
Loading, Hard Drive,
Part 1.”
Reseat
hard drive.
N
1. Replace
hard drive.
2. Replace system
board.
CD or
diskette in
drive?
Y
Y
Hard drive
accessible?
Done
N
Remove
diskette and
reboot.
Run FDISK.
Y
Boot
from
hard drive?
N
Done
N
Hard drive
partitioned?
Create partition,
and then format
hard drive to
bootable
C:\ prompt.
Y
N
Boot
from diskette
drive?
Y
N
Go to
“Flowchart
2.13—No OS
Loading,
Diskette Drive.”
Hard drive
formatted?
Y
Format hard drive
and bring to
a bootable
C:\ prompt.
N
Y
Hard drive
accessible?
Y
Notebook
booted?
Done
Go to
“Flowchart
2.12—No OS
Loading, Hard
Drive, Part 3.”
2–22
N
Load OS using
System Restore
disc (if applicable).
Go to
“Flowchart
2.12—No OS
Loading, Hard
Drive, Part 3.”
Maintenance and Service Guide
Troubleshooting
Flowchart 2.12—No OS Loading, Hard
Drive, Part 3
Continued from
“Flowchart
2.11—No OS
Loading, Hard
Drive, Part 2.”
N
System
files on hard
drive?
Install OS
and reboot.
Y
Y
Y
Virus
on hard drive?
OS
loading from
hard drive?
Clean virus.
N
Done
N
Y
Run SCANDISK
and check for
bad sectors.
Diagnostics
on diskette?
Replace
hard drive.
N
N
Can bad
sectors
be fixed?
Run diagnostics
and follow
recommendations.
Replace
hard drive.
Y
N
Boot from
hard drive?
Fix bad
sectors.
Replace
hard drive.
Y
Done
Maintenance and Service Guide
2–23
Troubleshooting
Flowchart 2.13—No OS Loading,
Diskette Drive
Y
OS not loading
from
diskette drive.
Reseat
diskette drive.
OS
loading?
Done
N
Y
N
Bootable
diskette
in drive?
Nonsystem
disk message?
N
Install bootable
diskette and
reboot notebook.
Y
N
Check diskette
for system files.
Try different
diskette.
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Boot
from another
device?
Y
Y
N
Diskette
drive enabled
in the Setup
utility?
1. Replace diskette
drive.
2. Replace system
board.
Nonsystem
disk error?
Enable drive
and cold boot
notebook.
N
Y
Y
Y
Is diskette
drive boot
order
correct?
OS
loading?
Clear CMOS.
Done
N
N
Change boot
priority using
the Setup utility.
2–24
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Maintenance and Service Guide
Troubleshooting
Flowchart 2.14—No OS Loading, CD-ROM or
DVD-ROM Drive
Y
No OS
loading from
CD-ROM or
DVD-ROM Drive.
N
Bootable
disc in
drive?
Disc
in drive?
Y
N
Install
bootable disc.
Install bootable
disc and
reboot
notebook.
Try another
bootable disc.
Y
Boots from
CD or DVD?
Done
N
Y
Boots from
CD or DVD?
Reseat
drive.
Done
N
N
Booting
from another
device?
Y
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Y
Booting
order
correct?
Clear CMOS.
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
N
Correct boot
order using
the Setup utility.
Maintenance and Service Guide
2–25
Troubleshooting
Flowchart 2.15—No Audio, Part 1
Y
Turn up audio
internally or
externally.
No audio.
Audio?
Done
N
Y
Notebook in
port replicator
(if applicable)?
N
N
Go to
“Flowchart
2.16—No Audio,
Part 2.”
Internal
audio?
Undock
Y
Go to
“Flowchart
2.16—No Audio,
Part 2.”
Replace the following port replicator
components one at a time, as applicable.
Check audio status after each change.
1. Replace port replicator audio cable.
2. Replace audio cable.
3. Replace speaker.
4. Replace port replicator audio board.
5. Replace backplane board.
6. Replace I/O board.
Y
Go to
“Flowchart
2.17—Nonfunctioning
Device.”
Audio?
Done
N
2–26
Maintenance and Service Guide
Troubleshooting
Flowchart 2.16—No Audio, Part 2
Continued from
“Flowchart
2.15—No Audio,
Part 1.”
N
Audio
driver in OS
configured?
Reload
audio drivers.
Y
N
Correct
drivers for
application?
Load drivers and
set configuration
in OS.
Y
Connect to
external
speaker.
N
Audio?
Y
Replace audio
board and
speaker
connections
in notebook
(if applicable).
Y
Audio?
Done
N
1. Replace internal speakers.
2. Replace audio board (if applicable).
3. Replace system board.
Maintenance and Service Guide
2–27
Troubleshooting
Flowchart 2.17—Nonfunctioning Device
Nonfunctioning
device.
Reseat
device.
Unplug the nonfunctioning device from
the notebook and inspect cables and plugs for
bent or broken pins or other damage.
Y
Any physical
device detected?
Fix or
replace
broken item.
Replace hard drive.
Go to
“Flowchart
2.9—No Operating
System (OS)
Loading.”
Clear
CMOS.
N
Reattach device.
Close notebook,
plug in power,
and reboot.
N
Device
boots
properly?
N
Replace NIC.
If integrated NIC,
replace system
board.
Y
Y
Done
2–28
Device
boots
properly?
Replace diskette
drive.
Done
Maintenance and Service Guide
Troubleshooting
Flowchart 2.18—Nonfunctioning Keyboard
Keyboard
not operating
properly.
Connect notebook
to good external
keyboard.
N
External
device
works?
Replace
system
board.
Y
Reseat internal
keyboard
connector
(if applicable).
N
Replace internal
keyboard or cable.
OK?
Y
Y
Done
OK?
Done
N
Replace
system
board.
Maintenance and Service Guide
2–29
Troubleshooting
Flowchart 2.19—Nonfunctioning Pointing
Device
Pointing device
not operating
properly.
Connect notebook
to good external
pointing device.
N
Replace
system
board.
External
device
works?
Y
Reseat internal
pointing device
connector
(if applicable).
N
Replace internal
pointing device
or cable.
OK?
Y
Y
Done
OK?
Done
N
Replace
system
board.
2–30
Maintenance and Service Guide
Troubleshooting
Flowchart 2.20—No Network/Modem
Connection
No network
or modem
connection.
N
Replace jack
or have jack
activated.
Network
or modem jack
active?
Y
Y
Digital
line?
Connect to
nondigital line.
N
Y
N
NIC/modem
configured
in OS?
Reload
drivers and
reconfigure.
Done
OK?
N
Y
Disconnect all
power from
the notebook
and open.
Replace
NIC/modem
(if applicable).
Y
Reseat NIC/modem
(if applicable).
OK?
Done
N
Replace
system
board.
Maintenance and Service Guide
2–31
3
Illustrated Parts Catalog
This chapter provides an illustrated parts breakdown and a
reference for spare part numbers and option part numbers.
Maintenance and Service Guide
3–1
Illustrated Parts Catalog
3.1 Serial Number Location
When ordering parts or requesting information, provide the
notebook serial number and model number located on the bottom
of the notebook.
Serial Number Location
3–2
Maintenance and Service Guide
Illustrated Parts Catalog
3.2 Major Components—
HP Pavilion zv5000 and zx5000
Notebook Major Components—HP Pavilion zv5000 and zx5000
Maintenance and Service Guide
3–3
Illustrated Parts Catalog
Table 3-2
HP Pavilion zv5000 and zx5000 Notebooks
Spare Parts: Notebook Major Components
Item
Description
1
Display assemblies
2
3
For use with HP Pavilion zx5000 notebook models
15.4-inch, WUXGA, with wireless antennae
15.4-inch, WUXGA, without wireless antennae
15.4-inch, WSXGA, with wireless antennae
15.4-inch, WSXGA, without wireless antennae
15.4-inch, WXGA, with wireless antennae
15.4-inch, WXGA, without wireless antennae
15.0-inch, XGA, with wireless antennae
15.0-inch, XGA, without wireless antennae
350217-001
350847-001
350216-001
350844-001
350215-001
350841-001
350214-001
350838-001
For use with HP Pavilion zv5000 notebook models
14.1-inch, XGA, with antennae
14.1-inch, XGA, without antennae
354862-001
354865-001
Display inverter (not illustrated)
354873-001
Wireless antennae cables (not illustrated)
Right antennae cable
Left antennae cable
354874-001
354875-001
Diskette drive
350231-001
Upper Logic Audio Board (not illustrated)
370474-001
TouchPad Board (not illustrated)
370473-001
LED Board (not illustrated)
370472-001
Top Cover (not illustrated)
370471-001
Strip covers
With wireless button
Without wireless button
3–4
Spare Part
Number
350849-001
350850-001
Maintenance and Service Guide
Illustrated Parts Catalog
Notebook Major Components—HP Pavilion zv5000 and zx5000
(Continued)
Maintenance and Service Guide
3–5
Illustrated Parts Catalog
Table 3-2
HP Pavilion zv5000 and zx5000 Notebooks
Spare Parts: Notebook Major Components (Continued)
Item
Description
4
Optical drives
Spare Part
Number
24X Max DVD+R/RW and CD-RW Combo Drive
8X Max DVD-ROM Drive
24X Max DVD/CD-RW Combo Drive
24X Max CD-ROM Drive
5
Keyboards
Denmark
Europe
France
Germany
Greece
Israel
Italy
The Netherlands
6
7
350187-081
350187-021
350187-051
350187-041
350187-151
350187-BB1
350187-061
350187-331
People’s Republic
of China
Saudi Arabia
Spain
Sweden/Finland
Switzerland
United Kingdom
United States
Front bezel
HP Pavilion zx5000 models
HP Pavilion zv5000 models
350187-AA1
350187-171
350187-071
350187-B71
350187-111
350187-031
350187-001
350854-001
365684-001
Fan assemblies
For use with HP Pavilion zx5000 “M10” models
For use with HP Pavilion zx5000 “M9” models
For use with HP Pavilion zv5000 models
3–6
350209-001
350207-001
350208-001
354858-001
350781-001
350232-001
370489-001
Maintenance and Service Guide
Illustrated Parts Catalog
Notebook Major Components—HP Pavilion zv5000 and zx5000
(Continued)
Maintenance and Service Guide
3–7
Illustrated Parts Catalog
Table 3-2
HP Pavilion zv5000 and zx5000 Notebooks
Spare Parts: Notebook Major Components (Continued)
Item
Description
4
Optical drives
Spare Part
Number
24X Max DVD+R/RW and CD-RW Combo Drive
8X Max DVD-ROM Drive
24X Max DVD/CD-RW Combo Drive
24X Max CD-ROM Drive
350209-001
350207-001
350208-001
354858-001
Miscellaneous Plastics Kit
(includes the following components):
350206-001
8a
8b
8c
8d
1394 bezel
Memory module compartment cover
Battery cover
Heat sink cover
PC Card slot space saver (not illustrated)
Notebook feet (not illustrated)
9
Speaker assembly
3–8
350772-001
Maintenance and Service Guide
Illustrated Parts Catalog
Notebook Major Components—HP Pavilion zv5000 and zx5000
(Continued)
Maintenance and Service Guide
3–9
Illustrated Parts Catalog
Table 3-2
HP Pavilion zv5000 and zx5000 Notebooks
Spare Parts: Notebook Major Components (Continued)
Item
Description
10
Heat sinks
Spare Part
Number
For use with HP Pavilion zx5000 “M10” models
For use with HP Pavilion zx5000 “M9” models
For use with HP Pavilion zv5000 Series
350783-001
350233-001
350776-001
11
Modem board
350239-001
12
System boards
13
14
3–10
For use with HP Pavilion zx5000 “M10” models
For use with HP Pavilion zx5000 M9” models
For use with HP Pavilion zv5000 “1620” models
For use with HP Pavilion zv5000 “1520” models
For use with HP Pavilion zv51xx and zv52xx Series
models (full featured)
For use with HP Pavilion zv51xxand zv52xx Series
models (without infrared)
For use with HP Pavilion zx5000 Series models
(full featured)
For use with HP Pavilion zx5000 Series models (without
infrared)
370533-001
370531-001
354893-001
354894-001
PC Card assembly (not illustrated)
350827-001
370475-001
370477 -001
370493-001
370492-001
Hard drives
80-GB, 5400-rpm
80-GB, 4200-rpm
60-GB, 5400-rpm
60-GB, 4200-rpm
40-GB, 4200-rpm
30-GB, 4200-rpm
350213-001
350212-001
354861-001
350211-001
350210-001
354860-001
Hard drive cover
350834-001
Maintenance and Service Guide
Illustrated Parts Catalog
Notebook Major Components—HP Pavilion zv5000 and zx5000
(Continued)
Maintenance and Service Guide
3–11
Illustrated Parts Catalog
Table 3-2
HP Pavilion zv5000 and zx5000 Notebooks
Spare Parts: Notebook Major Components (Continued)
Item
Description
15
Mini PCI communications cards
Spare Part
Number
802.11a/b/g wireless LAN card
802.11b wireless LAN card
802.11g wireless LAN card
Bluetooth wireless LAN card
16
354876-001
350218-001
350219-001
350220-001
Memory modules
1024-MB
512-MB
256-MB
17
350238-001
350237-001
370556-001
Processors
Mobile Intel Pentium 4, 3.06-GHz, 533-MHz
Mobile Intel Pentium 4, 2.80-GHz, 533-MHz
Mobile Intel Pentium 4, 2.40-GHz, 533-MHz
Mobile Intel Pentium 4 DT, 3.06-GHz
Mobile Intel Pentium 4 DT, 2.80-GHz
Mobile Intel Pentium 4 DT, 2.66-GHz
AMD Athlon 64, 2.40-GHz
AMD Athlon 64, 2.20-GHz
AMD Athlon 64, 2.00-GHz
AMD Athlon 64, 1.80-GHz
AMD Athlon 32, 1.80-GHz
AMD Athlon 32, 1.60-GHz
Processor support bracket (not illustrated)
For use with HP Pavilion zv5000 and zx5000 Series
models
For use with HP Pavilion zv51xx Series models
3–12
350229-001
350774-001
350228-001
350225-001
350224-001
350223-001
370498-001
370483-001
370484-001
370485-001
370486-001
370487-001
350785-001
356496-001
Maintenance and Service Guide
Illustrated Parts Catalog
Notebook Major Components—HP Pavilion zv5000 and zx5000
(Continued)
Maintenance and Service Guide
3–13
Illustrated Parts Catalog
Table 3-2
HP Pavilion zv5000 and zx5000 Notebooks
Spare Parts: Notebook Major Components (Continued)
Item
Description
Spare Part
Number
18
Base enclosure
350235-001
19
Battery packs
3–14
12-cell, Li-Ion, 14.8 V, 4.4-Ah
High Capacity 12-cell, Li-Ion, 14.8 V, 6.6-Ah
8-cell, Li-Ion, 14.4 V, 4.4-Ah
350836-001
346971-001
346970-001
Thermal module (not illustrated)
350776-001
Cable Kit (not illustrated)
350778-001
Maintenance and Service Guide
Illustrated Parts Catalog
3.3 Major Components—HP Compaq
Business Notebook nx9100 Series
and Compaq Presario R3000
Series
Notebook Major Components—HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 (Continued)
Maintenance and Service Guide
3–15
Illustrated Parts Catalog
Table 3-3
HP Compaq Business Notebook nx9100 Series
and Compaq Presario R3000 Series
Spare Parts: Notebook Major Components
Item
Description
1
Display assemblies
3–16
Spare Part
Number
For use with Compaq Presario R3000 Series models
15.4-inch, WUXGA, with wireless antennae
15.4-inch, WUXGA, without wireless antennae
15.4-inch, WSXGA, with wireless antennae
15.4-inch, WSXGA, without wireless antennae
15.4-inch, WXGA, with wireless antennae
15.4-inch, WXGA, without wireless antennae
15.0-inch, XGA, with wireless antennae
15.0-inch, XGA, without wireless antennae
14.1-inch, XGA, with antennae
14.1-inch, XGA, without antennae
350846-001
350848-001
350843-001
350845-001
350840-001
350839-001
350837-001
350839-001
354863-001
354866-001
For use with HP Compaq Business Notebook nx9100
Series models
15.4-inch, WXGA, with antennae
15.4-inch, WXGA, without antennae
15.0-inch, XGA, with antennae
15.0-inch, XGA, without antennae
14.1-inch, XGA, with antennae
14.1-inch, XGA, without antennae
354870-001
354871-001
354868-001
354869-001
354864-001
354867-001
Display inverter (not illustrated)
354872-001
Wireless antenna cables (not illustrated)
Right antenna cable
Left antenna cable
354874-001
354875-001
Maintenance and Service Guide
Illustrated Parts Catalog
Notebook Major Components—HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 (Continued)
Maintenance and Service Guide
3–17
Illustrated Parts Catalog
Table 3-3
HP Compaq Business Notebook nx9100 Series
and Compaq Presario R3000
Spare Parts: Notebook Major Components (Continued)
Item
Spare Part
Number
Description
Miscellaneous Plastics Kit
(includes the following components):
2a
350818-001
Strip covers
For use with Compaq Presario R3000 Series models
For use with HP Compaq Business Notebook nx9100
Series models
2b
2c
2d
2e
2f
1394 bezel
Heat sink cover
Hard drive cover
Memory module compartment cover
Battery cover
PC Card slot space saver (not illustrated)
Notebook feet (not illustrated)
3
Keyboards
Denmark
Europe
France
Germany
Greece
Israel
Italy
The Netherlands
3–18
350787-081
350787-021
350787-051
350787-041
350787-151
350787-BB1
357087-061
350787-331
People’s Republic
of China
Saudi Arabia
Spain
Sweden/Finland
Switzerland
United Kingdom
United States
350851-001
354954-001
350787-AA1
350787-171
350787-071
350787-B71
350787-111
350787-031
350787-001
Maintenance and Service Guide
Illustrated Parts Catalog
Notebook Major Components—HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 (Continued)
Maintenance and Service Guide
3–19
Illustrated Parts Catalog
Table 3-3
HP Compaq Business Notebook nx9100 Series
and Compaq Presario R3000 Series
Spare Parts: Notebook Major Components (Continued)
Item
Description
4
Front bezels
Spare Part
Number
For use with Compaq Presario R3000 Series models
with wireless button
without wireless button
350855-001
350856-001
For use with HP Compaq Business Notebook nx9100
models
with infrared lens and wireless button
with infrared lens, without wireless button
without infrared lens, with wireless button
without infrared lens, without wireless button
354898-001
354899-001
354896-001
354897-001
5
Speaker assembly
350773-001
6
Modem board
350239-001
7
Mini PCI communications cards
802.11a/b/g wireless LAN card
802.11b wireless LAN card
802.11g wireless LAN card
Bluetooth wireless LAN card
3–20
354876-001
350218-001
350219-001
350220-001
Maintenance and Service Guide
Illustrated Parts Catalog
Notebook Major Components—HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 (Continued)
Maintenance and Service Guide
3–21
Illustrated Parts Catalog
Table 3-3
HP Compaq Business Notebook nx9100 Series
and Compaq Presario R3000 Series
Spare Parts: Notebook Major Components (Continued)
Spare Part
Number
Item
Description
8
System boards
For use with HP Compaq Business Notebook nx9100
and nx9110 models
For use with HP Compaq Business Notebook nx9105
models
For use with Compaq Presario R3200 and
HP Compaq Business Notebook nx9110 notebook
models (full featured)
For use with Compaq Presario R3200 and
HP Compaq Business Notebook nx9110 notebook
models (without infared)
For use with Compaq Presario R3000 notebook
models (full featured)
For use with Compaq Presario R3000 notebook
models (without infrared)
For use with Compaq Presario R3000 “M10” models
For use with Compaq Presario R3000 “M9” models
9
3–22
Fan assembly
For use with HP Compaq Business Notebook nx9100
Series and Compaq Presario R3000 notebook models
For use with Compaq Presario R3000 “M10” models
For use with Compaq Presario R3000 “M9” models
370496-001
360689-001
370476-001
370478-001
370495-001
370494-001
370534-001
370532-001
370490-001
350782-001
350780-001
Maintenance and Service Guide
Illustrated Parts Catalog
Notebook Major Components—HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 (Continued)
Maintenance and Service Guide
3–23
Illustrated Parts Catalog
Table 3-3
HP Compaq Business Notebook nx9100 Series
and Compaq Presario R3000 Series
Spare Parts: Notebook Major Components (Continued)
Item
Description
10
Processors
Spare Part
Number
Mobile Intel Pentium 4, 3.06-GHz, 533-MHz
Mobile Intel Pentium 4, 2.80-GHz, 533-MHz
Mobile Intel Pentium 4, 2.40-GHz, 533-MHz
Intel Pentium 4 DT, 3.20-GHz
Intel Pentium 4 DT, 3.06-GHz
Intel Pentium 4 DT, 2.80-GHz
Intel Pentium 4 DT, 2.66-GHz
AMD Athlon XP-M, 1.6-GHz
AMD Athlon XP-M, 1.8-GHz
AMD Athlon XP-M, 2.0-GHz
AMD Athlon 64, 2.4-GHz
AMD Athlon 64, 2.2-GHz
AMD Athlon 64, 2.0-GHz
AMD Athlon 64, 1.8-GHz
AMD Athlon 32, 1.8-GHz
AMD Athlon 32, 1.6-GHz
3–24
350229-001
350774-001
350228-001
364847-001
350225-001
350224-001
350223-001
360693-001
360694-001
360695-001
370498-001
370483-001
370484-001
370485-001
370486-001
370487-001
Maintenance and Service Guide
Illustrated Parts Catalog
Notebook Major Components—HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 (Continued)
Maintenance and Service Guide
3–25
Illustrated Parts Catalog
Table 3-3
HP Compaq Business Notebook nx9100 Series
and Compaq Presario R3000 Series
Spare Parts: Notebook Major Components (Continued)
Item
Description
11
Heat sinks
Spare Part
Number
For use with HP Compaq Business Notebook nx9110
model and Compaq Presario R3001, R3002, and
R3010 notebook models
For use with HP Compaq Business Notebook nx9105
and Compaq Presario R3004 and R31xx notebook
models
12
350776-001
360684-001
Hard drives
80-GB, 5400-rpm
80-GB, 4200-rpm
60-GB, 5400-rpm
60-GB, 4200-rpm
40-GB, 4200-rpm
30-GB, 4200-rpm
350213-001
350212-001
354861-001
350211-001
350210-001
354860-001
13
Base enclosure
350786-001
14
Optical drives
24X Max DVD+R/RW and CD-RW Combo Drive
8X Max DVD-ROM Drive
24X Max DVD/CD-RW Combo Drive
24X Max CD-ROM Drive
350833-001
350831-001
350832-001
354859-001
15
Diskette drive
350231-001
16
Memory modules
1024-MB
512-MB
256-MB
3–26
350238-001
350237-001
370556-001
Maintenance and Service Guide
Illustrated Parts Catalog
Notebook Major Components—HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 (Continued)
Maintenance and Service Guide
3–27
Illustrated Parts Catalog
Table 3-3
HP Compaq Business Notebook nx9100 Series
and Compaq Presario R3000 Series
Spare Parts: Notebook Major Components (Continued)
Item
Description
17
Battery packs
3–28
Spare Part
Number
12-cell, Li-Ion, 14.8-V, 6.6-Ah
8-cell, Li-Ion, 14.4-V, 4.4-Ah
346971-001
346970-001
Thermal module (not illustrated)
For use with HP Compaq Business Notebook nx9110
model and Compaq Presario R3001, R3002, and
R3010 notebook models
For use with HP Compaq Business Notebook nx9105
and Compaq Presario R3004 and R31xx notebook
models
350776-001
Cable Kit (not illustrated)
350778-001
360684-001
Maintenance and Service Guide
Illustrated Parts Catalog
3.4 Miscellaneous Plastics Kit
Components
Miscellaneous Plastics Kit Components
Table 3-4
Miscellaneous Plastics Kit Components
Spare Part Number 350206-001 for
HP Pavilion zx5000 and zv5000 Series and Spare
Part Number 350818-001 for HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 Series
Item
1
2
3
4
5
6
7
8
9
Description
Memory module compartment cover
PC Card slot space saver
Notebook feet (4)
Battery cover
1394 bezel
Infrared lens
Strip cover
Hard drive cover
Heat sink cover
Maintenance and Service Guide
3–29
Illustrated Parts Catalog
3.5 Mass Storage Devices
Table 3-5
Mass Storage Devices
Spare Part Number Information
Item
Description
1
Diskette drive
Spare Part
Number
For use with Pavilion zv5000 and zx5000 notebook
models
For use with HP Compaq Business Notebook nx9100
Series and Compaq Presario R3000 models
2
350779-001
Hard drives
80-GB, 5400-rpm
80-GB, 4200-rpm
60-GB, 5400-rpm
60-GB, 4200-rpm
40-GB, 4200-rpm
30-GB, 4200-rpm
3–30
350231-001
350213-001
350212-001
354861-001
350211-001
350210-001
354860-001
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-5
Mass Storage Devices
Spare Part Number Information (Continued)
Item
Description
3
Optical Drives
4
Spare Part
Number
For use with Pavilion zv5000 and zx5000 notebook
models
24X Max DVD+R/RW and CD-RW Combo Drive
8X Max DVD-ROM Drive
24X Max DVD/CD-RW Combo Drive
24X Max CD-ROM Drive
350209-001
350207-001
350208-001
354858-001
For use with HP Compaq Business Notebook nx9100
Series and Compaq Presario R3000 Series models
24X Max DVD+R/RW and CD-RW Combo Drive
8X Max DVD-ROM Drive
24X Max DVD/CD-RW Combo Drive
24X Max CD-ROM Drive
350833-001
350831-001
350832-001
354859-001
HP USB Digital Drive
DL702A (with 128-MB memory)
Weight saver
Maintenance and Service Guide
364727-001
361694-001
3–31
Illustrated Parts Catalog
3.6 Miscellaneous
Table 3-6
Miscellaneous (not illustrated)
Spare Part Information
Spare Part
Number
Description
3-wire power cord sets
Denmark
Europe
France
Germany
Greece
Israel
Italy
The Netherlands
350188-081
350188-021
350188-051
350188-041
350188-151
350188-BB1
350188-061
350188-331
People’s Republic
of China
Saudi Arabia
Spain
Sweden/Finland
Switzerland
United Kingdom
United States
Label Kits
For use with Pavilion zx5200 Series
For use with Pavilion zv5200 Series
For use with Presario R3000 Series
For use with Presario R3200 Series
For use with HP Business Notebook nx9110 models
For use with Pavilion zx5000 Series and zv50xx
notebook models
For use with Presario R3001, R3002, and R3010
knobbed models
For use with HP Pavilion zv51xx notebook models
For use with Compaq Presario R3004 notebook and
R31xx notebook models
For use with HP Business Notebook nx9105 model
350188-AA1
350188-171
350188-071
350188-B71
350188-111
350188-031
350188-001
365398-001
370479-001
365397-001
370480-001
370481-001
350230-001
350777-001
360700-001
360701-001
360702-001
AC adapters
120-W, PFC
120-W, non-PFC
135-W, PFC
3–32
370497-001
370998-001
360699-001
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-6
Miscellaneous (not illustrated)
Spare Part Information (Continued)
Spare Part
Number
Description
Carrying cases
Leather, top load, Samsung
Leather, top load, SG
Nylon, top load, Samsung
Nylon, top load, SG
Nylon, entry level
325817-001
325817-002
325815-001
325815-002
325814-001
Port Replicators
Advanced Port Replicator
Common Port Replicator
339096-001
339097-001
Security card
345856-001
Entertainment Cable and Y Cable
359680-001
Screw Kit (includes the following screws; refer to
Appendix C, “Screw Listing,” for more information on screw
specifications and usage.)
For use with HP Pavilion zx5000 Series and zv50xx
notebook models, HP Compaq Business Notebook
nx9110 model, and Compaq Presario R3001, R3002,
and R3010 notebook models
For use with HP Pavilion zv51xx notebook models,
HP Compaq Business Notebook nx9105 model, and
Compaq Presario R3004 and R31xx notebook models
■
■
■
■
■
Phillips PM2.5×13.0 screw
Phillips PM2.5×6.0 screw
Phillips PM2.5×5.0 screw
Phillips PM2.5×4.0 screw
Phillips PM2.5×3.0 screw
USB mouse, carbon
Maintenance and Service Guide
350222-001
360703-001
■ Phillips PM2.5×11.0 spring-loaded
screw
■ Phillips PM1.5×10.0 shoulder screw
■ Phillips PM2.0×3.0 screw
■ Hex M5.0×9.0 standoffs
164999-001
3–33
4
Removal and Replacement
Preliminaries
This chapter provides essential information for proper and safe
removal and replacement service.
4.1 Tools Required
You will need the following tools to complete the removal and
replacement procedures:
■
Magnetic screwdriver
■
Phillips P0 screwdriver
■
5.0-mm socket for system board standoffs
■
Flat-bladed screwdriver
■
Tool kit (includes connector removal tool, loopback plugs,
and case utility tool)
Maintenance and Service Guide
4–1
Removal and Replacement Preliminaries
4.2 Service Considerations
The following sections include some of the considerations to
keep in mind during disassembly and assembly procedures.
you remove each subassembly from the notebook, place
✎ As
the subassembly (and all accompanying screws) away from
the work area to prevent damage.
Plastic Parts
Using excessive force during disassembly and reassembly can
damage plastic parts. Use care when handling the plastic parts.
Apply pressure only at the points designated in the maintenance
instructions.
Cables and Connectors
Ä
CAUTION: When servicing the notebook, ensure that cables are
placed in their proper locations during the reassembly process.
Improper cable placement can damage the notebook.
Cables must be handled with extreme care to avoid damage.
Apply only the tension required to unseat or seat the cables
during removal and insertion. Handle cables by the connector
whenever possible. In all cases, avoid bending, twisting, or
tearing cables. Ensure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or
replaced. Handle flex cables with extreme care; these cables
tear easily.
4–2
Maintenance and Service Guide
Removal and Replacement Preliminaries
4.3 Preventing Damage to
Removable Drives
Removable drives are fragile components that must be handled
with care. To prevent damage to the notebook, damage to a
removable drive, or loss of information, observe the following
precautions:
■
Before removing or inserting a hard drive, shut down the
notebook. If you are unsure whether the notebook is off or
in Hibernation, turn the notebook on, and then shut it down.
■
Before removing a diskette drive or optical drive, ensure that
a diskette or disc is not in the drive. Ensure that the optical
drive tray is closed.
■
Before handling a drive, ensure that you are discharged of
static electricity. While handling a drive, avoid touching the
connector.
■
Handle drives on surfaces covered with at least one inch of
shock-proof foam.
■
Avoid dropping drives from any height onto any surface.
■
After removing a hard drive, CD-ROM drive, or diskette
drive, place it in a static-proof bag.
■
Avoid exposing a hard drive to products that have magnetic
fields, such as monitors or speakers.
■
Avoid exposing a drive to temperature extremes or liquids.
■
If a drive must be mailed, place the drive in a bubble pack
mailer or other suitable form of protective packaging and
label the package “Fragile: Handle With Care.”
Maintenance and Service Guide
4–3
Removal and Replacement Preliminaries
4.4 Preventing Electrostatic Damage
Many electronic components are sensitive to electrostatic
discharge (ESD). Circuitry design and structure determine the
degree of sensitivity. Networks built into many integrated circuits
provide some protection, but in many cases the discharge contains
enough power to alter device parameters or melt silicon junctions.
A sudden discharge of static electricity from a finger or other
conductor can destroy static-sensitive devices or microcircuitry.
Often the spark is neither felt nor heard, but damage occurs.
An electronic device exposed to electrostatic discharge might not
be affected at all and can work perfectly throughout a normal
cycle. Or the device might function normally for a while, and then
degrade in the internal layers, reducing its life expectancy.
4–4
Maintenance and Service Guide
Removal and Replacement Preliminaries
4.5 Packaging and Transporting
Precautions
Use the following grounding precautions when packaging and
transporting equipment:
■
To avoid hand contact, transport products in static-safe
containers, such as tubes, bags, or boxes.
■
Protect all electrostatic-sensitive parts and assemblies with
conductive or approved containers or packaging.
■
Keep electrostatic-sensitive parts in their containers until
the parts arrive at static-free workstations.
■
Place items on a grounded surface before removing items
from their containers.
■
Always be properly grounded when touching a sensitive
component or assembly.
■
Store reusable electrostatic-sensitive parts from assemblies
in protective packaging or nonconductive foam.
■
Use transporters and conveyors made of antistatic belts and
roller bushings. Ensure that mechanized equipment used for
moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not
possible, use an ionizer to dissipate electric charges.
Maintenance and Service Guide
4–5
Removal and Replacement Preliminaries
4.6 Workstation Precautions
Use the following grounding precautions at workstations:
4–6
■
Cover the workstation with approved static-shielding
material (refer to Table 4-2, “Static-Shielding Materials”).
■
Use a wrist strap connected to a properly grounded work
surface and use properly grounded tools and equipment.
■
Use conductive field service tools, such as cutters,
screwdrivers, and vacuums.
■
When using fixtures that must directly contact dissipative
surfaces, only use fixtures made of static-safe materials.
■
Keep the work area free of nonconductive materials, such as
ordinary plastic assembly aids and Styrofoam.
■
Handle electrostatic-sensitive components, parts, and
assemblies by the case or PCM laminate. Handle these
items only at static-free workstations.
■
Avoid contact with pins, leads, or circuitry.
■
Turn off power and input signals before inserting or
removing connectors or test equipment.
Maintenance and Service Guide
Removal and Replacement Preliminaries
4.7 Grounding Equipment and
Methods
Grounding equipment must include either a wrist strap or a foot
strap at a grounded workstation.
■
When seated, wear a wrist strap connected to a grounded
system. Wrist straps are flexible straps with a minimum of
one megohm ±10% resistance in the ground cords. To
provide proper ground, wear a strap snugly against the skin
at all times. On grounded mats with banana-plug connectors,
connect a wrist strap with alligator clips.
■
When standing, use foot straps and a grounded floor mat.
Foot straps (heel, toe, or boot straps) can be used at standing
workstations and are compatible with most types of shoes
or boots. On conductive floors or dissipative floor mats, use
foot straps on both feet with a minimum of one-megohm
resistance between the operator and ground. To be effective,
the conductive strips must be worn in contact with the skin.
Maintenance and Service Guide
4–7
Removal and Replacement Preliminaries
Other grounding equipment recommended for use in preventing
electrostatic damage includes:
4–8
■
Antistatic tape
■
Antistatic smocks, aprons, and sleeve protectors
■
Conductive bins and other assembly or soldering aids
■
Nonconductive foam
■
Conductive tabletop workstations with ground cords of
one-megohm resistance
■
Static-dissipative tables or floor mats with hard ties to
the ground
■
Field service kits
■
Static awareness labels
■
Material-handling packages
■
Nonconductive plastic bags, tubes, or boxes
■
Metal tote boxes
■
Electrostatic voltage levels and protective materials
Maintenance and Service Guide
Removal and Replacement Preliminaries
Table 4-1 shows how humidity affects the electrostatic voltage
levels generated by different activities.
Table 4-1
Typical Electrostatic Voltage Levels
Relative Humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
✎ A product can be degraded by as little as 700 volts.
Table 4-2 lists the shielding protection provided by antistatic bags
and floor mats.
Table 4-2,
Static-Shielding Materials
Material
Use
Voltage Protection Level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Maintenance and Service Guide
4–9
5
Removal and Replacement
Procedures
This chapter provides removal and replacement procedures.
There are 73 screws and standoffs, in 8 different sizes, that must
be removed, replaced, or loosened when servicing the Pavilion
notebook. There are 65 screws, in 8 different sizes, that must be
removed, replaced, or loosened when servicing the HP Compaq
Business Notebook nx9100 Series or Compaq Presario R3000
Series. Make special note of each screw and standoff size and
location during removal and replacement.
Refer to Appendix C, “Screw Listing” for detailed information
on screw sizes, locations, and use.
Maintenance and Service Guide
5–1
Removal and Replacement Procedures
5.1
Serial Number
Report the notebook serial number to HP when requesting
information or ordering spare parts. The serial number is
located on the bottom of the notebook.
Serial Number Location
5–2
Maintenance and Service Guide
Removal and Replacement Procedures
5.2
Disassembly Sequence Chart
Use the chart below to determine the section number to be
referenced when removing notebook components.
Disassembly Sequence Chart
Section
Description
# of Screws Removed
5.3
Preparing the notebook for disassembly
Battery pack
Hard drive
0
2 loosened to remove
4 removed to disassemble
5.4
Notebook feet
0
5.5
Memory module (external,
located on bottom of notebook)
1 loosened
5.6
Combination drive
2 to remove
4 to disassemble
5.7
Heat sink
10 to remove Pavilion
heat sink cover
11 to remove HP Compaq
Business Notebook nx9100
Series and Compaq
Presario R3000 heat sink
cover
4 to remove heat sink
5.8
Processor
0
5.9
Strip cover
3
5.10
Keyboard
4
5.11
Modem board
2
5.12
Mini PCI communications card
0
5.13
System memory module
(internal, located under
keyboard)
0
Maintenance and Service Guide
5–3
Removal and Replacement Procedures
Disassembly Sequence Chart (Continued)
Section
Description
# of Screws Removed
5.14
Display assembly
8 on Pavilion
6 on HP Compaq Business
Notebook nx9100 Series
and
Compaq Presario R3000
5.15
Base enclosure
13
5.16
Speaker assembly
1
5.17
System board
8 on Pavilion
4 on HP Compaq Business
Notebook nx9100 Series
and
Compaq Presario R3000
5.18
Fan assembly
5 screws and 4 standoffs on
Pavilion
5 screws on HP Compaq
Business Notebook nx9100
Series and Compaq
Presario R3000
5–4
Maintenance and Service Guide
Removal and Replacement Procedures
5.3
Preparing the Notebook for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the notebook. If you are unsure whether the
notebook is off or in Hibernation, turn the computer on and
then shut it down through the operating system.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
Spare Part Number Information
Battery packs
For use with Pavilion notebook models
12-cell, Li-Ion, 14.8-V, 2.2-Ah
12-cell, Li-Ion, 14.8-V, 6.6-Ah
8-cell, Li-Ion, 14.4-V, 4.4-Ah
350836-001
346971-001
346970-001
For use with HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000
Series models
12-cell, Li-Ion, 14.8-V, 6.6-Ah
8-cell, Li-Ion, 14.4-V, 4.4-Ah
346971-001
346970-001
Maintenance and Service Guide
5–5
Removal and Replacement Procedures
4. Remove the battery pack by following these steps:
a. Turn the notebook upside down with the rear panel
toward you.
b. Slide and hold the battery release latch 1 toward you. The
left side of the battery pack releases from the notebook.
c. Swing the battery pack up and to the right 2.
d. Remove the battery pack.
Removing the Battery Pack
5–6
Maintenance and Service Guide
Removal and Replacement Procedures
e. If necessary, remove the battery pack cover.
Removing the Battery Pack Cover
battery pack cover is included in the Miscellaneous
✎ The
Plastics Kit: spare part number 350206-001 for use with
Pavilion notebook models, and spare part number
350818-001 for use with HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 Series models.
Reverse the above procedure to install the battery pack and
battery pack cover.
Spare Part Number Information
Hard drives (include hard drive cover)
80-GB, 5400-rpm
80-GB, 4200-rpm
60-GB, 5400-rpm
60-GB, 4200-rpm
40-GB, 4200-rpm
30-GB, 4200-rpm
Maintenance and Service Guide
350213-001
350212-001
354861-001
350211-001
350210-001
354860-001
5–7
Removal and Replacement Procedures
5. Remove the hard drive by following these steps:
a. Turn the notebook upside down with the rear panel
toward you.
b. Loosen the 2 PM2.5×6.0 captive screws 1 that secure the
hard drive cover to the notebook.
c. Lift the right side of the hard drive cover up and swing
it to the left 2 to disconnect the hard drive from the
notebook.
d. Remove the hard drive.
Removing the Hard Drive
5–8
Maintenance and Service Guide
Removal and Replacement Procedures
Ä
CAUTION: The hard drive should be disassembled only if it is
damaged and must be repaired. Unnecessary disassembly of the
hard drive can result in damage to the hard drive and loss of
information.
e. Remove the 4 PM2.5×4.0 screws 1 that secure the
hard drive to the hard drive cover.
f. Remove the hard drive from the hard drive cover 2.
Removing the Hard Drive Cover
hard drive cover is included with the hard drive and
✎ The
also in the Miscellaneous Plastics Kit: spare part number
350206-001 for use with Pavilion notebook models, and
spare part number 350818-001 for use with HP Compaq
Business Notebook nx9100 Series and Compaq Presario
R3000 Series models.
Reverse the above procedure to reassemble and install the
hard drive.
Maintenance and Service Guide
5–9
Removal and Replacement Procedures
5.4
Notebook Feet
The notebook feet are adhesive-backed rubber pads. The
notebook feet are included in the Miscellaneous Plastics
Kit: spare part number 350206-001 for use with Pavilion
notebook models, and spare part number 350818-001 for
use with HP Compaq Business Notebook nx9100 Series
and Compaq Presario R3000 Series models.
»
Attach the notebook feet to the base enclosure as
illustrated below.
Replacing the Notebook Feet
5–10
Maintenance and Service Guide
Removal and Replacement Procedures
5.5
Memory Module
Spare Part Number Information
Memory modules
1024-MB
512-MB
256-MB
350238-001
350237-001
370556-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook upside down with the rear panel
toward you.
Maintenance and Service Guide
5–11
Removal and Replacement Procedures
3 through 7 apply only to HP Pavilion zx5000 Series,
✎ Steps
HP Pavilion zv5000 Series, and HP Compaq Business Notebook
nx9100 Series models.
3. Loosen the PM2.5×6.0 captive screw 1 that secures the
memory module compartment cover to the notebook.
4. Lift the left side of the memory module compartment cover
up and swing it to the right 2.
5. Remove the cover.
Removing the Memory module Compartment Cover
memory module compartment cover is included in the
✎ The
Miscellaneous Plastics Kit: spare part number 350206-001
for use with Pavilion notebook models, and spare part
number 350818-001 for use with HP Compaq Business
Notebook nx9100 Series.
5–12
Maintenance and Service Guide
Removal and Replacement Procedures
6. Spread the retaining tabs 1 that secure the memory module
to the socket. The edge of the board opposite the edge
connector rises up.
7. Pull the board away from the socket at a 45-degree angle 2.
Removing a Memory Module
Reverse the above procedure to install a memory module.
Maintenance and Service Guide
5–13
Removal and Replacement Procedures
8 through 12 apply only to Compaq Presario R3000 Series
✎ Steps
models.
8. Loosen the PM2.5×6.0 captive screw 1 that secures the
memory module compartment cover to the notebook.
9. Lift the left side of the memory module compartment cover
up and swing it to the right 2.
10. Remove the cover.
Removing the Memory Module Compartment Cover
memory module compartment cover is included in the
✎ The
Miscellaneous Plastics Kit: spare part number 350818-001
for use with Compaq Presario R3000 Series models.
5–14
Maintenance and Service Guide
Removal and Replacement Procedures
11. Spread the retaining tabs 1 that secure the memory module
to the socket. The edge of the board opposite the edge
connector rises up.
12. Pull the board away from the socket at a 45-degree angle 2.
Removing a Memory Module
Reverse the above procedure to install a memory module.
Maintenance and Service Guide
5–15
Removal and Replacement Procedures
5.6
Combination Drive
combination drive consists of an optical drive and either
✎ The
an HP USB Digital Drive or a diskette drive.
Spare Part Number Information
Diskette drive
For use with Pavilion notebook models
For use with HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000
Series models
5–16
350231-001
350779-001
Optical Drives
For use with Pavilion notebook models
24X Max DVD+R/RW and CD-RW Combo Drive
8X Max DVD-ROM Drive
24X Max DVD/CD-RW Combo Drive
24X Max CD-ROM drive
350209-001
350207-001
350208-001
354858-001
For use with HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000
Series models
24X Max DVD+R/RW and CD-RW Combo Drive
8X Max DVD-ROM Drive
24X Max DVD/CD-RW Combo Drive
24X Max CD-ROM Drive
350833-001
350831-001
350832-001
354859-001
Maintenance and Service Guide
Removal and Replacement Procedures
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook upside down with the right side
toward you.
3. Remove the 2 PM2.5×6.0 screws 1 that secure the
combination drive to the notebook.
4. Slowly slide the drive out of the notebook 2 as far as
the drive cable 3 will allow.
Releasing the Combination Drive
Maintenance and Service Guide
5–17
Removal and Replacement Procedures
5. Flip the drive over and rest it on the notebook 1.
the combination drive consists of an optical drive and a
✎ Ifdiskette
drive, perform steps 6 and 7 to disconnect the flex
cable from the drive.
6. Release the zero insertion force (ZIF) connector 2 to which
the drive cable is attached and disconnect the cable 3.
7. Remove the combination drive.
Removing the Combination Drive
5–18
Maintenance and Service Guide
Removal and Replacement Procedures
drive consists of an optical drive and
✎ IfantheHPcombination
USB Digital Drive, perform steps 8 and 9 to
disconnect the flex cable from the drive.
8. Release the zero insertion force (ZIF) connector 1 to which
the drive cable is attached and disconnect the cable 2.
9. Remove the combination drive.
Removing the Combination Drive
Maintenance and Service Guide
5–19
Removal and Replacement Procedures
10. To separate the optical drive from the HP USB Digital Drive
or diskette drive, remove the 4 PM2.0×3.0 screws 1 that
secure the drives together.
11. Separate the drives 2.
Disassembling the Combination Drive
Reverse the above procedure to reassemble and install the
combination drive.
5–20
Maintenance and Service Guide
Removal and Replacement Procedures
5.7
Heat Sink
Spare Part Number Information
Heat sinks
HP Pavilion zx5000 “M10” models
HP Pavilion zx5000 “M9” models
For use with HP Pavilion zv5000 Series,
HP Compaq Business Notebook nx9110 model,
and Compaq Presario R3001, R3002, and R3010
notebook models
For use with HP Compaq Business Notebook
nx9105 and Compaq Presario R3004 and R31xx
notebook models
350783-001
350233-001
350776-001
360684-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the memory module compartment cover
(Section 5.5).
3. Turn the notebook so that the front panel is toward you.
Maintenance and Service Guide
5–21
Removal and Replacement Procedures
✎ Steps 4 and 5 apply only to Pavilion notebook models.
4. Remove the 6 PM2.5×6.0 screws 1 and the 4 PM2.5×13.0
screws 2 that secure the thermal cover to the notebook.
5. Remove the thermal cover 3 from the notebook.
Removing the Thermal Cover on Pavilion Notebook Models
5–22
Maintenance and Service Guide
Removal and Replacement Procedures
6 and 7 apply only to HP Compaq Business Notebook
✎ Steps
nx9100 Series and Compaq Presario R3000 Series notebook
models.
6. Remove the 6 PM2.5×6.0 screws 1 and the 5 PM2.5×13.0
screws 2 that secure the thermal cover to the notebook.
7. Remove the thermal cover 3 from the notebook.
Removing the Thermal Cover on HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 Series Models
Maintenance and Service Guide
5–23
Removal and Replacement Procedures
8. Remove the 4 PM2.5×11.0 spring-loaded shoulder
screws that secure the heat sink to the notebook.
Removing the Heat Sink Screws
reinstalling the heat sink screws, first start all
✎ When
4 screws but do not tighten them. After all 4 screws are
started, tighten each screw until the shoulder on the screw
is fully seated against the screw post. Tighten the screws
diagonally across the heat sink, not in sequence around the
heat sink.
5–24
Maintenance and Service Guide
Removal and Replacement Procedures
9 applies only to notebook models with a Mobile Intel
✎ Step
Pentium 4 or Intel Pentium 4 processor.
9. Use a flat-bladed screwdriver to turn the processor lock screw
one-quarter turn counterclockwise to release the processor
from the socket.
Releasing the Processor on HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 Notebook Models
Maintenance and Service Guide
5–25
Removal and Replacement Procedures
10. Lift up on the right front corner of the heat sink 1 until it
disengages from the notebook.
11. Slide the heat sink away from you 2, and then to the left 3
to clear the tabs on the heat sink from the notebook.
12. Remove the heat sink.
processor will remain attached to the heat sink when the
✎ The
heat sink is removed from the notebook.
Removing the Heat Sink
Reverse the above procedure to install the heat sink.
13 applies only to notebook models with a Mobile Intel
✎ Step
Pentium 4 or Intel Pentium 4 processor.
13. Remove the processor from the heat sink and place it on
an antistatic pad.
clean any thermal grease residue from the
✎ Carefully
heat sink and processor surfaces each time you remove
the heat sink. Apply new thermal grease to both surfaces
before reinstalling the heat sink.
5–26
Maintenance and Service Guide
Removal and Replacement Procedures
5.8
Processor
Spare Part Number Information
Processors
Mobile Intel Pentium 4, 3.06-GHz, 533-MHz
Mobile Intel Pentium 4, 2.80-GHz, 533-MHz
Mobile Intel Pentium 4, 2.40-GHz, 533-MHz
Intel Pentium 4 DT, 3.20-GHz
Intel Pentium 4 DT, 3.06-GHz
Intel Pentium 4 DT, 2.80-GHz
Intel Pentium 4 DT, 2.66-GHz
AMD Athlon XP-M, 1.6-GHz
AMD Athlon XP-M, 1.8-GHz
AMD Athlon XP-M, 2.0-GHz
AMD Athlon 64, 2.4-GHz
AMD Athlon 64, 2.2-GHz
AMD Athlon 64, 2.0-GHz
AMD Athlon 64, 1.8-GHz
AMD Athlon 32, 1.8-GHz
AMD Athlon 32, 1.6-GHz
Processor support bracket (not illustrated)
For use with HP Pavilion zv5000 and zx5000
Series models
For use with HP Pavilion zv51xx Series models
350229-001
350774-001
350228-001
364847-001
350225-001
350224-001
350223-001
360693-001
360694-001
360695-001
370498-001
370483-001
370484-001
370485-001
370486-001
370487-001
350785-001
356496-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the memory module compartment cover
(Section 5.5).
3. Remove the heat sink (Section 5.7).
4. Turn the notebook so that the the rear panel is toward you.
Maintenance and Service Guide
5–27
Removal and Replacement Procedures
5 and 6 apply only to notebook models with an
✎ Steps
AMD Athlon 64 or Athlon XP-M processor.
5. Press the processor lock lever slightly to the left to release it
and then lift it up so that it rotates toward you to a 90-degree
angle 1 to release the processor from the socket.
6. Lift the processor straight up 2 to remove it.
the gold triangle 3 in the upper-right corner when you
✎ Align
reinstall the processor.
Removing the Processor
Reverse the above procedure to install the processor.
5–28
Maintenance and Service Guide
Removal and Replacement Procedures
7 and 8 apply only to notebook models with a Mobile
✎ Steps
Intel Pentium 4 or Intel Pentium 4 processor. The processor
was removed with the heat sink in Section 5.7 to avoid damaging
the pins.
7. Align the processor so that the gold triangle 1 is in the
lower- right corner. Press the processor 2 straight down
into the socket to install it.
8. Use a flat-bladed screwdriver to turn the processor lock
screw 3 one-quarter turn clockwise to lock the processor
in the socket.
Replacing the Processor
Maintenance and Service Guide
5–29
Removal and Replacement Procedures
5.9
Strip Cover
Spare Part Number Information
Strip covers
For use with Pavilion notebook models, with
wireless button
For use with Pavilion notebook models, without
wireless button
For use with Presario notebook models
For use with Business Notebook models
350849-001
350850-001
350851-001
354954-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook upside down with the rear panel
toward you.
3. Remove the 3 PM2.5×13.0 screws that secure the strip cover
to the notebook.
screws that secure the strip cover to the notebook
✎ 2alsoof the
secure the thermal cover. It is not necessary to remove
the thermal cover to remove the strip cover.
Removing the Strip Cover Screws
5–30
Maintenance and Service Guide
Removal and Replacement Procedures
4. Turn the notebook right-side up with the front toward you.
5. Open the notebook display as far as possible.
6. Using a flat-bladed screwdriver, lift the right side 1 of the
strip cover to disengage the cover 2 from the notebook.
7. Lift the middle of the strip cover 3 and swing it toward you
to remove it from the notebook.
Removing the Strip Cover
Reverse the above procedure to install the strip cover.
Maintenance and Service Guide
5–31
Removal and Replacement Procedures
5.10 Keyboard
Spare Part Number Information
Keyboards
Denmark
Europe
France
Germany
Greece
Israel
Italy
The Netherlands
350187-081
350187-021
350187-051
350187-041
350187-151
350187-BB1
350187-061
350187-331
People’s Repubic
of China
Saudi Arabia
Spain
Sweden/Finland
Switzerland
United Kingdom
United States
350187-AA1
350187-171
350187-071
350187-B71
350187-111
350187-031
350187-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the strip cover (Section 5.9).
5–32
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the 4 PM2.5×3.0 screws 1 that secure the keyboard
to the notebook.
4. Lift the rear edge of the keyboard up 2 and swing it toward
you until it rests on the palm rest.
5. Disconnect the ZIF connector 3 to which the keyboard cable
is attached and disconnect the keyboard cable 4.
Removing the Keyboard
Reverse the above procedure to install the keyboard.
Maintenance and Service Guide
5–33
Removal and Replacement Procedures
5.11 Modem Board
Spare Part Number Information
Modem board
350239-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the strip cover (Section 5.9).
3. Remove the keyboard (Section 5.10).
4. Remove the 2 PM2.0×3.0 screws 1 that secure the
modem board to the notebook.
5. Lift up the right side 2 of the modem board to disconnect
it from the system board.
6. Remove the modem board.
7. Disconnect the modem cable 3 from the modem board.
Removing the Modem Board
Reverse the above procedure to install the modem board.
5–34
Maintenance and Service Guide
Removal and Replacement Procedures
5.12 Mini PCI Communications Card
Spare Part Number Information
Mini PCI communications cards
802.11a/b/g wireless LAN card
802.11b wireless LAN card
802.11g wireless LAN card
Bluetooth wireless LAN card
354876-001
350218-001
350219-001
350220-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the strip cover (Section 5.9).
3. Remove the keyboard (Section 5.10).
Maintenance and Service Guide
5–35
Removal and Replacement Procedures
4. Disconnect the 2 antennae cables 1 from the Mini PCI
communications card.
5. Spread the retaining tabs 2 that secure the Mini PCI
communications card to the socket. The edge of the card
that is opposite the edge connector rises.
6. Pull the card away from the socket at a 45-degree angle 3.
Removing the Mini PCI Communications Card
Ä
CAUTION: Handle the antennae wires and connectors carefully during
reassembly so that the connectors are not damaged and the wires do
not become pinched between the edge of the board and the shield.
Reverse the above procedure to install the Mini PCI
communications card.
5–36
Maintenance and Service Guide
Removal and Replacement Procedures
5.13 Primary Memory Module
Spare Part Number Information
Memory modules
1024-MB
512-MB
256-MB
350238-001
350237-001
370556-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the strip cover (Section 5.9).
3. Remove the keyboard (Section 5.10).
Maintenance and Service Guide
5–37
Removal and Replacement Procedures
4. Spread the retaining tabs 1 that secure the primary memory
board to the socket. The edge of the board that is opposite
the edge connector rises up.
5. Pull the board away from the socket at a 45-degree angle 2.
Removing the Memory Module
Reverse the above procedure to install the memory module.
5–38
Maintenance and Service Guide
Removal and Replacement Procedures
5.14 Display Assembly
Spare Part Number Information
Display assemblies
For use with HP Pavilion zv5000 notebook models
15.4-inch, WUXGA, with wireless antennae
15.4-inch, WUXGA, without wireless antennae
15.4-inch, WSXGA, with wireless antennae
15.4-inch, WSXGA, without wireless antennae
15.4-inch, WXGA, with wireless antennae
15.4-inch, WXGA, without wireless antennae
15.0-inch, XGA, with wireless antennae
15.0-inch, XGA, without wireless antennae
350217-001
350847-001
350216-001
350844-001
350215-001
350841-001
350214-001
350838-001
For use with HP Pavilion zx5000 notebook models
14.1-inch, XGA, with antennae
14.1-inch, XGA, without antennae
354862-001
354865-001
For use with Compaq Presario R3000 Series models
15.4-inch, WUXGA, with wireless antennae
15.4-inch, WUXGA, without wireless antennae
15.4-inch, WSXGA, with wireless antennae
15.4-inch, WSXGA, without wireless antennae
15.4-inch, WXGA, with wireless antennae
15.4-inch, WXGA, without wireless antennae
15.0-inch, XGA, with wireless antennae
15.0-inch, XGA, without wireless antennae
14.1-inch, XGA, with antennae
14.1-inch, XGA, without antennae
350846-001
350848-001
350843-001
350845-001
350840-001
350839-001
350837-001
350839-001
354863-001
354866-001
For use with HP Compaq Business Notebook nx9100
Series models
15.4-inch, WXGA, with antennae
15.4-inch, WXGA, without antennae
15.0-inch, XGA, with antennae
15.0-inch, XGA, without antennae
14.1-inch, XGA, with antennae
14.1-inch, XGA, without antennae
354870-001
354871-001
354868-001
354869-001
354864-001
354867-001
Maintenance and Service Guide
5–39
Removal and Replacement Procedures
Spare Part Number Information (Continued)
Display inverters (not illustrated)
For use with HP Pavilion zv5000 and zx5000
notebook models
For use with HP Compaq Business Notebook nx9100 Series
and Compaq Presario R3000 Pavilion notebook models
Wireless antennae cables (not illustrated)
Right antenna cable
Left antenna cable
354873-001
354872-001
354874-001
354875-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the strip cover (Section 5.9).
3. Remove the keyboard (Section 5.10).
4. Remove the thermal cover (Section 5.7).
5. Disconnect the wireless antennae cables from the Mini PCI
communications card (Section 5.12).
5–40
Maintenance and Service Guide
Removal and Replacement Procedures
✎ Steps 6 through 12 apply only to Pavilion notebook models.
6. Disconnect the display cable from the system board.
Disconnecting the Display Cable on Pavilion Notebook Models
Maintenance and Service Guide
5–41
Removal and Replacement Procedures
7. Remove the antennae cables from the top cover clips 1 that
secure the cables.
8. Remove the 4 PM2.5×6.0 screws 2 that secure the display
assembly to the notebook.
Removing the Wireless antennae Cables and Display Assembly
Screws on Pavilion Notebook Models
5–42
Maintenance and Service Guide
Removal and Replacement Procedures
9. Position the notebook so the rear panel is toward you and
the display is in a fully upright position.
10. Remove the oblong Mylar screw covers 1 from the rear
panel of the notebook.
11. Remove the 4 PM2.5×6.0 screws 2 that secure the
display assembly to the notebook.
12. Lift the display straight up 3 to remove it.
Removing the Display Assembly on Pavilion Notebook Models
Maintenance and Service Guide
5–43
Removal and Replacement Procedures
13 through 22 apply only to HP Compaq Business
✎ Steps
Notebook nx9100 Series and Compaq Presario R3000
notebook models.
13. Turn the notebook upside down with the rear panel
toward you.
14. Remove the PM2.5x6.0 screw that secures the display
assembly to the notebook.
Removing the Display Screw on HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 Series models
5–44
Maintenance and Service Guide
Removal and Replacement Procedures
15. Turn the notebook right-side up with the front toward you.
16 does not apply to the HP Compaq Business Notebook
✎ Step
nx9105 model and Compaq Presario R3004 and R31xx
notebook models.
16. Remove the PM2.5x3.0 screw 1 that secures the display
cable ground connector 2 to the notebook.
17. Disconnect the display cable 3 from the system board.
18. Remove the display cable from the cover clip.
Disconnecting the Display Cable on HP Compaq Business
Notebook nx9100 Series and Compaq Presario R3000
Notebook Models
Maintenance and Service Guide
5–45
Removal and Replacement Procedures
19. Remove the antenna cables from the top cover clips 1 that
secure the cables.
20. Open the display assembly as far as possible.
21. Remove the 4 PM2.5x6.0 screws 2 that secure the
display assembly to the notebook.
22. Lift the display straight up 3 to remove it.
Removing the Display Assembly on Compaq Presario R3000 and
HP Compaq Business Notebook nx9100 Series
Reverse the above procedure to install the display assembly.
5–46
Maintenance and Service Guide
Removal and Replacement Procedures
5.15 Base Enclosure
Spare Part Number Information
Base enclosures
For use with Pavilion notebook models
For use with Compaq Presario R3000 and
HP Compaq Business Notebook nx9100 Series
350235-001
350786-001
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
❏ Combination drive (Section 5.6)
❏ Strip cover (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Display assembly (Section 5.14)
2. Turn the notebook upside down with the rear panel
toward you.
Maintenance and Service Guide
5–47
Removal and Replacement Procedures
✎ Steps 3 and 4 apply only to HP Pavilion notebook models.
3. Remove the 10 PM2.5×13.0 screws 1 and the 3 PM2.5×6.0
screws 2 that secure the base enclosure to the notebook.
4. Lift the base enclosure straight up 3 to remove it.
Removing the Base Enclosure on Pavilion Notebook Models
5–48
Maintenance and Service Guide
Removal and Replacement Procedures
5 and 6 apply only to HP Compaq Business Notebook
✎ Steps
nx9100 Series and Compaq Presario R3000 Series models.
5. Remove the 9 PM2.5×13.0 screws 1 and the 4 PM2.5×6.0
screws 2 that secure the base enclosure to the notebook.
6. Lift the base enclosure straight up to remove it.
Removing the Base Enclosure on HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 Series models
Reverse the above procedure to install the base enclosure.
Maintenance and Service Guide
5–49
Removal and Replacement Procedures
5.16 Speaker Assembly
Spare Part Number Information
Speaker assemblies
For use with HP Pavilion notebook models
For use with Compaq Presario R3000 and
HP Pavilion nx9000 and nx9100 notebook models
350772-001
350773-001
1. Prepare the notebook for disassembly (Section 5.3)
and remove the following components:
❏ Combination drive (Section 5.6)
❏ Strip cover (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Display assembly (Section 5.14)
❏ Base enclosure (Section 5.15)
5–50
Maintenance and Service Guide
Removal and Replacement Procedures
2. Turn the notebook so that the the rear panel is toward you.
3. Disconnect the speaker cable 1 from the system board.
4. Remove the PM2.5×6.0 screw 2 that secures the speaker
to the top cover.
Disconnecting the Speaker Cable and Removing the
Speaker Screw
Maintenance and Service Guide
5–51
Removal and Replacement Procedures
5. Lift up the edge 1 of the speaker until it disengages from
the top cover, and then slide the speaker toward you 2 to
remove it.
Removing the Speaker
Reverse the above procedure to install the speaker.
5–52
Maintenance and Service Guide
Removal and Replacement Procedures
5.17 LED Board
procedure only applies to HP Pavilion zv5000 Series and
✎ This
HP Pavilion zx5000 Series Notebooks
Spare Part Number Information
LED board
370473-001
1. Prepare the notebook for disassembly (Section 5.3)
and remove the following components:
❏ Combination drive (Section 5.6)
❏ Strip cover (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Display assembly (Section 5.14)
❏ Base enclosure (Section 5.15)
❏ Speaker Assembly (Section 5.16)
Maintenance and Service Guide
5–53
Removal and Replacement Procedures
2. Release the ZIF connector 1 to which the LED cable is
attached and disconnect the cable 2 from the LED board.
Disconnecting the LED Cable
5–54
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the 2 PM2.5×5.0 screws that secure the LED board
to the system board.
Removing the Screws from the LED Board
Maintenance and Service Guide
5–55
Removal and Replacement Procedures
4. Lift the LED board straight out of the notebook.
Removing the LED Board
Reverse the above procedure to install the LED board.
5–56
Maintenance and Service Guide
Removal and Replacement Procedures
5.18 TouchPad
procedure only applies to HP Pavilion zv5000 Series and
✎ This
HP Pavilion zx5000 Series Notebooks.
Spare Part Number Information
TouchPad
370473-001
1. Prepare the notebook for disassembly (Section 5.3)
and remove the following components:
❏ Combination drive (Section 5.6)
❏ Strip cover (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Display assembly (Section 5.14)
❏ Base enclosure (Section 5.15)
❏ Speaker assembly (Section 5.16)
❏ LED board (Section 5.17)
Maintenance and Service Guide
5–57
Removal and Replacement Procedures
2. Remove the adhesive tape 1, release the LIF connector 2 to
which the TouchPad cable is attached, and disconnect the
cable 3 from the TouchPad board.
Disconnecting the TouchPad Cable
5–58
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the 2 PM2.5×5.0 screws that secure the TouchPad
board to the top cover.
Removing the Screws from the TouchPad Board
Maintenance and Service Guide
5–59
Removal and Replacement Procedures
4. Remove the 2 PM2.5×5.0 screws that secure the TouchPad
board bracket to the top cover.
Removing the Screws from the TouchPad Board Bracket
5–60
Maintenance and Service Guide
Removal and Replacement Procedures
5. Pull the TouchPad bracket straight out of the top cover.
Removing the TouchPad Board Bracket
Maintenance and Service Guide
5–61
Removal and Replacement Procedures
6. Carefully push in the 2 side release latches of the TouchPad
to release the TouchPad from the top cover.
Releasing the TouchPad from the Top Cover
5–62
Maintenance and Service Guide
Removal and Replacement Procedures
7. Turn the top cover over, carefully pry the edges of the
TouchPad from the top cover, and then remove the TouchPad.
Removing the Touchpad Assembly
Reverse the above procedure to install the TouchPad assembly.
Maintenance and Service Guide
5–63
Removal and Replacement Procedures
5.19 System Board
Spare Part Number Information
System boards
For use with HP Pavilion zx5000 “M10” models
For use with HP Pavilion zx5000 “M9” models
For use with HP Pavilion zv5000 “1620” models
For use with HP Pavilion zv5000 “1520” models
For use with HP Pavilion zv51xx and zv52xx Series
models (full featured)
For use with HP Pavilion zv51xxand zv52xx Series
models (without infrared)
For use with HP Pavilion zx5000 Series models
(full featured)
For use with HP Pavilion zx5000 Series models
(without infrared)
For use with HP Compaq Business Notebook
nx9100 and nx9110 models
For use with HP Compaq Business Notebook
nx9105 models
For use with Compaq Presario R3200 and
HP Compaq Business Notebook nx9110 notebook
models (full featured)
For use with Compaq Presario R3200 and
HP Compaq Business Notebook nx9110 notebook
models (without infared)
For use with Compaq Presario R3000 notebook
models (full featured)
For use with Compaq Presario R3000 notebook
models (without infrared)
For use with Compaq Presario R3000 “M10”
models
For use with Compaq Presario R3000 “M9” models
PC Card assemblies (not illustrated)
370475-001
370477 -001
370493-001
370492-001
370496-001
360689-001
370476-001
370478-001
370495-001
370494-001
370534-001
370532-001
350828-001
For use with HP Pavilion notebook models
For use with Compaq Presario R3000 Series
models
5–64
370533-001
370531-001
354893-001
354894-001
350827-001
350828-001
Maintenance and Service Guide
Removal and Replacement Procedures
replacing the system board, ensure that the following
✎ When
components are removed from the defective system board
and installed on the replacement system board:
■ Memory modules (Section 5.5 and 5.13)
■ Heat sink (Section 5.7)
■ Processor (Section 5.8)
■ Modem board (Section 5.11)
■ Mini PCI communications card (Section 5.12)
■ Fan assembly (Section 5.20)
1. Prepare the notebook for disassembly (Section 5.3)
and remove the following components:
❏ Combination drive (Section 5.6)
❏ Strip cover (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Display assembly (Section 5.14)
❏ Base enclosure (Section 5.15)
❏ Speaker assembly (Section 5.16)
2. Turn the top cover right-side up with the rear panel
toward you.
Maintenance and Service Guide
5–65
Removal and Replacement Procedures
3 through 15 apply only to HP Pavilion notebook
✎ Steps
models.
3. Disconnect the modem cable from the system board 1.
4. Remove the 1394 bezel 2 or the blank bezel from the
top cover.
5. Remove the 2 PM2.5×6.0 screws 3 that secure the
system board to the top cover.
Removing the System Board Screws on HP Pavilion zv5000 and
HP Pavilion zx5000 Notebook Models
5–66
Maintenance and Service Guide
Removal and Replacement Procedures
6. Turn the top cover upside down with the rear panel
toward you.
7. Release the ZIF connector 1 to which the audio flex cable is
attached and disconnect the cable 2 from the system board.
8. Release the ZIF connector 3 to which the TouchPad cable is
attached and disconnect the cable 4 from the system board.
Disconnecting the Audio and TouchPad Cables on HP Pavilion
zv5000 and HP Pavilion zx5000 Notebook Models
Maintenance and Service Guide
5–67
Removal and Replacement Procedures
9. Remove the following screws that secure the system board
to the top cover:
1 One PM2.5×13.0 screw
2 Four PM2.6×6.0 screws
3 Two slotted PM1.5×10.0 shoulder screws on each side
of the port replicator connector
10. Remove the tape 4 that secures the diskette drive cable
top cover shielding.
11. Peel the diskette drive cable 5 off the top cover shielding.
Removing the System Board on HP Pavilion zv5000 and
HP Pavilion zx5000 Notebook Models
5–68
Maintenance and Service Guide
Removal and Replacement Procedures
12. Flex the left side of the top cover 1 to the left until the
1394 2 and USB ports 3 clear the top cover edge.
13. Lift the left side of the system board 4 until it rests at
an angle.
14. Slide the system board away from the top cover at an angle 5
until the right side of the system board clears the top cover.
15. Lift the system board straight up 6 to remove it.
Removing the System Board on HP Pavilion zv5000 and
HP Pavilion zx5000 Notebook Models
Maintenance and Service Guide
5–69
Removal and Replacement Procedures
16 through 28 apply only to HP Compaq Business
✎ Steps
Notebook nx9100 Series and Compaq Presario R3000 Series
models.
16. Disconnect the modem cable from the system board.
Disconnecting the Modem Cable on HP Compaq Business
Notebook nx9100 Series and Compaq Presario R3000 Series
Models
5–70
Maintenance and Service Guide
Removal and Replacement Procedures
17 applies only to the HP Compaq Business Notebook
✎ Step
nx9105 model, and Compaq Presario R3004 and R31xx
notebook models.
17. Remove the PM2.5×6.0 screw that connects the top cover
shield to the system board.
Removing the Shield Screw on HP Compaq Business Notebook
nx9105, Compaq Presario R3004 and R31xx Notebook Models
Maintenance and Service Guide
5–71
Removal and Replacement Procedures
18 applies only to the HP Compaq Business Notebook
✎ Step
nx9110 model and Compaq Presario R3001, R3002, and
R3010 notebook models.
18. Remove the Philips screw in the center of the shield.
Removing the Shield Screw on HP Compaq Business Notebook
nx9110 and Compaq Presario R3001, 3002, and R3010
Notebooks
5–72
Maintenance and Service Guide
Removal and Replacement Procedures
19. Turn the top cover upside down with the front panel
toward you.
20. Disconnect the audio cable from the system board 1.
21. Release the ZIF connector 2 to which the TouchPad cable is
attached and disconnect the cable 3 from the system board.
Disconnecting the Audio and TouchPad Cables on HP Compaq
Business Notebook nx9100 Series and Compaq Presario R3000
Series Models
Maintenance and Service Guide
5–73
Removal and Replacement Procedures
22. Remove the PM2.5×13.0 screw 1 and the 4 PM2.5×6.0
screws 2 that secure the system board to the top cover.
23. Remove the tape 3 that secures the diskette drive cable top
cover shielding.
24. Peel the diskette drive cable 4 off the top cover shielding.
Removing the System Board Screws on HP Compaq Business
Notebook nx9100 Series and Compaq Presario R3000 Series
Models
5–74
Maintenance and Service Guide
Removal and Replacement Procedures
25. Flex the left side of the top cover to the left 1 until the
1394 2 and USB ports 3 clear the top cover edge.
26. Lift the left side of the system board 4 until it rests at
an angle.
27. Slide the system board away from the top cover at an angle 5
until the right side of the system board clears the top cover.
28. Lift the system board straight up 6 to remove it.
Removing the System Board on HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000 Series Models
Reverse the above procedure to install the system board.
Maintenance and Service Guide
5–75
Removal and Replacement Procedures
5.20 Fan Assembly
Spare Part Number Information
Fan assemblies
For use with HP Pavilion zx5000 “M10” models
For use with HP Pavilion zx5000 “M9” models
For use with HP Pavilion zv5000 models
350781-001
350232-001
370489-001
For use with HP Compaq Business Notebook
nx9100 Series and Compaq Presario R3000
370490-001
notebook models
For use with Compaq Presario R3000 “M10” models 350782-001
350780-001
For use with Compaq Presario R3000 “M9” models
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
❏ Combination drive (Section 5.6)
❏ Strip cover (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Display assembly (Section 5.14)
❏ Base enclosure (Section 5.15)
❏ Speaker assembly (Section 5.16)
❏ System board (Section 5.19)
5–76
Maintenance and Service Guide
Removal and Replacement Procedures
2. Turn the system board right-side up with the rear panel away
from you.
3. Remove the PM2.5×5.0 screw 1 and the 4 PM2.5×6.0
screws 2 that secure the fan assembly and processor bracket
to the system board.
4. Remove the processor bracket 3.
Removing the Fan Assembly Screws
Maintenance and Service Guide
5–77
Removal and Replacement Procedures
5. Turn the system board upside down with the rear panel
toward you.
6. While holding the fan assembly with one hand, disconnect
the fan cables 1 from the system board.
✎ Steps 7 and 8 apply only to Pavilion notebook models.
7. Use a 5.0-mm socket to remove the four 9.0-mm standoffs 2
on each side of the parallel and S-Video connectors.
8. Remove the I/O bracket 3.
9. Remove the fan assembly 4.
Removing the Fan Assembly
Reverse the above procedure to install the fan assembly.
5–78
Maintenance and Service Guide
Removal and Replacement Procedures
5.21 Upper Logic Audio Board
procedure only applies to HP Pavilion zv5000 Series and
✎ This
HP Pavilion zx5000 Series Notebooks
Spare Part Number Information
Upper Logic Audio board
370474-001
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
❏ Combination drive (Section 5.6)
❏ Strip cover (Section 5.9)
❏ Keyboard (Section 5.10)
❏ Display assembly (Section 5.14)
❏ Base enclosure (Section 5.15)
❏ Speaker assembly (Section 5.16)
❏ System board (Section 5.19)
❏ Fan assembly (Section 5.20)
Maintenance and Service Guide
5–79
Removal and Replacement Procedures
2. Remove the 2 PM2.5×5.0 screws that secure the audio board
to the chassis.
Removing the Screws from the Upper Logic Audio Board
5–80
Maintenance and Service Guide
Removal and Replacement Procedures
3. Pull the the audio board straight up out of the chassis.
Removing the Upper Logic Audio Board
Reverse the above procedure to install the upper logic
audio board.
Maintenance and Service Guide
5–81
6
Specifications
This chapter provides physical and performance specifications.
Table 6-1
HP Pavilion zx5000 Series Notebook
Dimensions
Height
Width
Depth
5.06 cm
36.20 cm
28.40 cm
1.99 in
14.25 in
11.18 in
3.735 kg
8.236 lb
3.866 kg
8.524 lb
3.815 kg
8.412 lb
3.835 kg
8.456 lb
3.620 kg
7.982 lb
Weight
With 12-cell battery pack and
MultiBay weight saver
With 12-cell battery pack and
diskette drive
With 12-cell battery pack and
garage (w/o cage)
With 12-cell battery pack and
garage (with cage)
With 8-cell battery pack and
MultiBay weight saver
Stand-alone power requirements
Nominal operating voltage
Maximum operating power
Peak operating power
Maintenance and Service Guide
14.4 V dc
60 W
65 W
6–1
Specifications
Table 6-1
HP Pavilion zx5000 Series Notebook (Continued)
Temperature
Operating
(not writing to optical disc)
Operating
(writing to optical disc)
Nonoperating
0°C to 35°C
32°F to 95°F
5°C to 35°C
41°F to 95°F
-20°C to 60°C
-4°F to 140°F
Relative humidity (noncondensing)
Operating
Nonoperating
10% to 90%
5% to 95%, 38.7° C (101.6° F) maximum
wet bulb temperature
Altitude (unpressurized)
Operating (14.7 to 10.1 psia)
Nonoperating (14.7 to 4.4 psia)
-15 m to 3,048 m
-15 m to 12,192 m
-50 ft to 10,000 ft
-50 ft to 40,000 ft
Shock
Operating
Nonoperating
125 g, 2 ms, half-sine
200 g, 2 ms, half-sine
Random Vibration
Operating voltage
Operating current
0.75 g
1.50 g
product safety standards specify thermal limits for plastic
✎ Applicable
surfaces. The notebook operates well within this range of
temperatures.
6–2
Maintenance and Service Guide
Specifications
Table 6-2
HP Pavilion zv5000 Series Notebook
Dimensions
Height
Width
Depth
5.06 cm
36.20 cm
28.4 cm
1.99 in
14.25 in
11.18 in
3.712 kg
8.185 lb
3.843 kg
8.473 lb
3.792 kg
8.361 lb
3.812 kg
8.405 lb
3.597 kg
7.932 lb
Weight
With 12-cell battery pack and
MultiBay weight saver
With 12-cell battery pack and
diskette drive
With 12-cell battery pack and
garage (w/o cage)
With 12-cell battery pack and
garage (with cage)
With 8-cell battery pack and
MultiBay weight saver
Stand-alone power requirements
Nominal operating voltage
Maximum operating power
Peak operating power
14.4 V dc
60 W
65 W
Temperature
Operating
(not writing to optical disc)
Operating
(writing to optical disc)
Nonoperating
0°C to 35°C
32°F to 95°F
5°C to 35°C
-20°C to 60°C
41°F to 95°F
-4°F to 140°F
Relative humidity (noncondensing)
Operating
Nonoperating
Maintenance and Service Guide
10% to 90%
5% to 95%, 38.7° C (101.6° F) maximum
wet bulb temperature
6–3
Specifications
Table 6-2
HP Pavilion zv5000 Series Notebook (Continued)
Altitude (unpressurized)
Operating (14.7 to 10.1 psia)
Nonoperating (14.7 to 4.4 psia)
-15 m to 3,048 m
-15 m to 12,192 m
-50 ft to 10,000 ft
-50 ft to 40,000 ft
Shock
Operating
Nonoperating
125 g, 2 ms, half-sine
200 g, 2 ms, half-sine
Random Vibration
Operating voltage
Operating current
0.75 g
1.50 g
product safety standards specify thermal limits for plastic
✎ Applicable
surfaces. The notebook operates well within this range of
temperatures.
6–4
Maintenance and Service Guide
Specifications
Table 6-3
HP Compaq Business Notebook nx9100 Series
Dimensions
Height
Width
Depth
5.06 cm
36.20 cm
28.16 cm
1.99 in
14.25 in
11.09 in
3.646 kg
8.040 lb
3.777 kg
8.328 lb
3.726 kg
8.216 lb
3.746 kg
8.260 lb
3.531 kg
7.786 lb
Weight
With 12-cell battery pack and
MultiBay weight saver
With 12-cell battery pack and
diskette drive
With 12-cell battery pack and
garage (w/o cage)
With 12-cell battery pack and
garage (with cage)
With 8-cell battery pack and
MultiBay weight saver
Stand-alone power requirements
Nominal operating voltage
Maximum operating power
Peak operating power
14.4 V dc
60 W
65 W
Temperature
Operating
(not writing to optical disc)
Operating
(writing to optical disc)
Nonoperating
0°C to 35°C
5°C to 35°C
-20°C to 60°C
32°F to 95°F
41°F to 95°F
-4°F to 140°F
Relative humidity (noncondensing)
Operating
Nonoperating
Maintenance and Service Guide
10% to 90%
5% to 95%, 38.7° C (101.6° F) maximum
wet bulb temperature
6–5
Specifications
Table 6-3
HP Compaq Business Notebook nx9100 Series (Continued)
Altitude (unpressurized)
Operating (14.7 to 10.1 psia)
Nonoperating (14.7 to 4.4 psia)
-15 m to 3,048 m
-15 m to 12,192 m
-50 ft to 10,000 ft
-50 ft to 40,000 ft
Shock
Operating
Nonoperating
125 g, 2 ms, half-sine
200 g, 2 ms, half-sine
Random Vibration
Operating voltage
Operating current
0.75 g
1.50 g
product safety standards specify thermal limits for plastic
✎ Applicable
surfaces. The notebook operates well within this range of
temperatures.
6–6
Maintenance and Service Guide
Specifications
Table 6-4
Compaq Presario R3000 Notebook
Dimensions
Height
Width
Depth
5.06 cm
36.20 cm
28.40 cm
1.99 in
14.25 in
11.18 in
3.669 kg
8.090 lb
3.80 kg
8.379 lb
3.749 kg
8.267 lb
3.769 kg
8.311 lb
3.555 kg
7.837 lb
Weight
With 12-cell battery pack and
MultiBay weight saver
With 12-cell battery pack and
diskette drive
With 12-cell battery pack and
garage (w/o cage)
With 12-cell battery pack and
garage (with cage)
With 8-cell battery pack and
MultiBay weight saver
Stand-alone power requirements
Nominal operating voltage
Maximum operating power
Peak operating power
14.4 V dc
60 W
65 W
Temperature
Operating
(not writing to optical disc)
Operating
(writing to optical disc)
Nonoperating
0°C to 35°C
32°F to 95°F
5°C to 35°C
41°F to 95°F
-20°C to 60°C
-4°F to 140°F
Relative humidity (noncondensing)
Operating
Nonoperating
Maintenance and Service Guide
10% to 90%
5% to 95%, 38.7° C (101.6° F) maximum
wet bulb temperature
6–7
Specifications
Table 6-4
Compaq Presario R3000 Notebook (Continued)
Altitude (unpressurized)
Operating (14.7 to 10.1 psia)
Nonoperating (14.7 to 4.4 psia)
-15 m to 3,048 m
-15 m to 12,192 m
-50 ft to 10,000 ft
-50 ft to 40,000 ft
Shock
Operating
Nonoperating
125 g, 2 ms, half-sine
200 g, 2 ms, half-sine
Random Vibration
Operating voltage
Operating current
0.75 g
1.50 g
product safety standards specify thermal limits for plastic
✎ Applicable
surfaces. The notebook operates well within this range of
temperatures.
6–8
Maintenance and Service Guide
Specifications
Table 6-5
14.1" XGA, TFT Display
Dimensions
Height
Width
Diagonal
28.6 cm
21.4 cm
35.7 cm
Number of colors
Up to 16.8 million
Contrast ratio
250:1
Refresh rate
60 Hz
Brightness
180 nits typical
11.2 in
8.4 in
14.1 in
Pixel resolution
Pitch
Format
Configuration
0.204 × 0.204 mm
1400 × 1050
RGB stripe
Backlight
CCFT
Character display
80 × 25
Total power consumption
4W
Viewing angle
±40° horizontal, +20/-40° vertical typical
Maintenance and Service Guide
6–9
Specifications
Table 6-6
15.0" XGA (1024x768), TFT Display
Dimensions
Height
Width
Diagonal
28.6 cm
21.4 cm
35.7 cm
11.2 in
8.4 in
15.0 in
Number of colors
Up to 16.8 million
Contrast ratio
250:1
Refresh rate
60 Hz
Brightness
180 nits typical
Pixel resolution
Pitch
Format
Configuration
0.204 × 0.204 mm
1024 × 768
RGB stripe
Backlight
CCFT
Character display
80 × 25
Total power consumption
4W
Viewing angle
±40° horizontal, +20/-40° vertical typical
6–10
Maintenance and Service Guide
Specifications
Table 6-7
15.4" WXGA, TFT Display
Dimensions
Height
Width
Diagonal
20.7 cm
33.1 cm
39.1 cm
Number of colors
Up to 16.8 million
Contrast ratio
200:1
Refresh rate
60 Hz
Brightness
180 nits typical
8.1 in
13.0 in
15.4 in
Pixel resolution
Pitch
Format
Configuration
0.259 × 0.259 mm
1280 × 800
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
4W
Viewing angle
±65° horizontal, ±50° vertical typical
Maintenance and Service Guide
6–11
Specifications
Table 6-8
15.4" WXGA WVA (1280x800), TFT Display
Dimensions
Height
Width
Diagonal
20.7 cm
33.1 cm
39.1 cm
8.1 in
13.0 in
15.4 in
Number of colors
Up to 16.8 million
Contrast ratio
200:1
Refresh rate
60 Hz
Brightness
180 nits typical
Pixel resolution
Pitch
Format
Configuration
0.204 × 0.204 mm
1280 × 800
RGB stripe
Backlight
CCFT
Character display
80 × 25
Total power consumption
4W
Viewing angle
±65° horizontal, ±50° vertical typical
6–12
Maintenance and Service Guide
Specifications
Table 6-9
15.4" WXGA WVA BrightView (1280x800)
Dimensions
Height
Width
Diagonal
28.6 cm
21.4 cm
35.7 cm
Number of colors
Up to 16.8 million
Contrast ratio
250:1
Refresh rate
60 Hz
Brightness
180 nits typical
11.2 in
8.4 in
14.1 in
Pixel resolution
Pitch
Format
Configuration
0.204 × 0.204 mm
1280 × 800
RGB stripe
Backlight
CCFT
Character display
80 × 25
Total power consumption
4W
Viewing angle
±40° horizontal, +20/-40° vertical typical
Maintenance and Service Guide
6–13
Specifications
Table 6-10
15.4" WSXGA+ WVA (1680x1050)
Dimensions
Height
Width
Diagonal
28.6 cm
21.4 cm
35.7 cm
11.2 in
8.4 in
14.1 in
Number of colors
Up to 16.8 million
Contrast ratio
250:1
Refresh rate
60 Hz
Brightness
180 nits typical
Pixel resolution
Pitch
Format
Configuration
0.204 × 0.204 mm
1680 × 1050
RGB stripe
Backlight
CCFT
Character display
80 × 25
Total power consumption
4W
Viewing angle
±40° horizontal, +20/-40° vertical typical
6–14
Maintenance and Service Guide
Specifications
Table 6-11
15.4" WUXGA WVA (1920x1200)
Dimensions
Height
Width
Diagonal
28.6 cm
21.4 cm
35.7 cm
Number of colors
Up to 16.8 million
Contrast ratio
250:1
Refresh rate
60 Hz
Brightness
180 nits typical
11.2 in
8.4 in
14.1 in
Pixel resolution
Pitch
Format
Configuration
0.279 × 0.279 mm
1920 × 1200
RGB stripe
Backlight
CCFT
Character display
80 × 25
Total power consumption
4W
Viewing angle
±40° horizontal, +20/-40° vertical typical
Maintenance and Service Guide
6–15
Specifications
Table 6-12
Hard Drive
80-GB
User capacity per drive*
80-GB
60-GB
80 GB
80 GB
60GB
9.5 mm
70 mm
99 g
9.5 mm
70 mm
99 g
9.5 mm
70 mm
99 g
ATA-5
ATA-5
ATA-5
100 MB/sec
ATA security
100 MB/sec
ATA security
100 MB/sec
ATA security
Dimensions
Height
Width
Weight
Interface type
Transfer rate
Synchronous (maximum)
Security
Seek times (typical read, including setting)
Single track
Average
Maximum
3 ms
13 ms
24 ms
Logical blocks†
117,210,240
Disk rotational speed
5400 rpm
4200 rpm
5400 rpm
Operating temperature
5°C to 55°C
(41°F to
131°F)
5°C to 55°C
(41°F to
131°F)
5°C to 55°C
(41°C to
131°F)
*1 GB = one billion bytes when referring to hard drive storage capacity. Actual
formatted capacity is less.
†
Actual drive specifications may differ slightly.
6–16
Maintenance and Service Guide
Specifications
Table 6-12
Hard Drive (Continued)
60-GB
User capacity per drive*
40-GB
30-GB
60 GB
40 GB
30 GB
9.5 mm
70 mm
99 g
9.5 mm
70 mm
99 g
9.5 mm
70 mm
99 g
ATA-5
ATA-5
ATA-5
100 MB/sec
ATA security
100 MB/sec
ATA security
100 MB/sec
ATA security
3 ms
13 ms
24 ms
2.5 ms
12 ms
23 ms
Dimensions
Height
Width
Weight
Interface type
Transfer rate
Synchronous (maximum)
Security
Seek times (typical read, including setting)
Single track
Average
Maximum
Logical blocks†
117,210,240
78,140,160
58,605,120
Disk rotational speed
4200 rpm
4200 rpm
4200 rpm
Operating temperature
5°C to 55°C
(41°F to
131°F)
5°C to 55°C
(41°F to
131°F)
5°C to 55°C
(41°C to
131°F)
*1 GB = one billion bytes when referring to hard drive storage capacity. Actual
formatted capacity is less.
†
Actual drive specifications may differ slightly.
Maintenance and Service Guide
6–17
Specifications
Table 6-13
External AC Adapter
Weight
0.29 kg
0.65 lb
Power supply
Operating voltage
Operating current
Operating frequency range
Maximum transient
90 to 264 VAC RMS
1.6 A RMS
47 to 63 Hz AC
4/50 kV
Table 6-14
8-cell Li-Ion Battery Pack
Dimensions
Height
Width
Depth
Weight
1.90 cm
7.60 cm
14.70 cm
0.43 kg
0.75 in
3.00 in
5.80 in
0.94 lb
Energy
Voltage
Amp-hour capacity
Watt-hour capacity
14.4 V
4.4 Ah
65 Wh
Temperature
Operating
Nonoperating
6–18
5°C to 45°C
0°C to 60°C
41°F to 113°F
32°F to 140°F
Maintenance and Service Guide
Specifications
Table 6-15
Optional MultiBay 8-cell Li-Ion Battery Pack
Dimensions
Height
Width
Depth
Weight
1.30 cm
13.20 cm
13.90 cm
0.39 kg
0.50 in
5.20 in
5.45 in
0.86 lb
Energy
Voltage
Amp-hour capacity
Watt-hour capacity
14.8 V
6.6 Ah
96 Wh
Temperature
Operating
Nonoperating
Maintenance and Service Guide
5°C to 45°C
0°C to 60°C
41°F to 113°F
32°F to 140°F
6–19
Specifications
Table 6-16
12-cell Li-Ion Battery Pack
Dimensions
Height
Width
Depth
Weight
2.01 cm
11.45 cm
21.24 cm
0.64 kg
0.75 in
4.50 in
6.00 in
1.40 lb
Energy
Voltage
Amp-hour capacity
Watt-hour capacity
14.8 V
4.4 Ah
65 Wh
Temperature
Operating
Nonoperating
5°C to 45°C
0°C to 60°C
41°F to 113°F
32°F to 140°F
Table 6-17
High Capacity 12-cell Li-Ion Battery Pack
Dimensions
Height
Width
Depth
Weight
2.01 cm
11.45 cm
21.24 cm
0.64 kg
0.75 in
4.50 in
6.00 in
1.40 lb
Energy
Voltage
Amp-hour capacity
Watt-hour capacity
14.8 V
6.6 Ah
98 Wh
Temperature
Operating
Nonoperating
6–20
5°C to 45°C
0°C to 60°C
41°F to 113°F
32°F to 140°F
Maintenance and Service Guide
Specifications
Table 6-18
24X Max DVD+RW/R and CD-RW Combo Drive
Applicable disc
DVD-5, DVD-9, DVD-10
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R (read only)
CD Plus
Photo CD (single/multisession)
CD-Bridge
Center hole diameter
1.5 cm
0.59 in
12 cm
8 cm
4.72 in
3.15 in
Disc thickness
1.2 mm
0.047 in
Track pitch
0.74 µm
Disc diameter
Standard disc
Mini disc
Access time
Random
Full stroke
< 150 ms
< 225 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
128 KB/s
Data transfer rate
CD-R (24X)
CD-RW (10X)
CD-ROM (24X)
DVD (8X)
Multiword DMA mode 2
3,600 KB/s (150 KB/s at 1X CD rate)
1,500 KB/s (150 KB/s at 1X CD rate)
3,600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1,352 KB/s at 1X DVD rate)
16.6 MB/s
Startup time
< 15 seconds
Stop time
< 6 seconds
Maintenance and Service Guide
6–21
Specifications
Table 6-19
24X Max DVD/CD-RW Combo Drive
Applicable disc
DVD-5, DVD-9, DVD-10
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R (read only)
CD Plus
Photo CD (single/multisession)
CD-Bridge
Center hole diameter
1.5 cm
0.59 in
12 cm
8 cm
4.72 in
3.15 in
Disc thickness
1.2 mm
0.047 in
Track pitch
0.74 µm
Disc diameter
Standard disc
Mini disc
Access time
Random
Full stroke
< 150 ms
< 225 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
128 KB/s
Data transfer rate
CD-R (24X)
CD-RW (10X)
CD-ROM (24X)
DVD (8X)
Multiword DMA mode 2
3600 KB/s (150 KB/s at 1X CD rate)
1500 KB/s (150 KB/s at 1X CD rate)
3600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1352 KB/s at 1X DVD rate)
16.6 MB/s
Startup time
< 15 seconds
Stop time
< 6 seconds
6–22
Maintenance and Service Guide
Specifications
Table 6-20
8X Max DVD-ROM Drive
Applicable disc
DVD-5, DVD-9, DVD-10
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R (read only)
CD Plus
Photo CD (single/multisession)
CD-Bridge
Center hole diameter
1.5 cm
0.59 in
12 cm
8 cm
4.72 in
3.15 in
Disc thickness
1.2 mm
0.047 in
Track pitch
0.74 µm
Disc diameter
Standard disc
Mini disc
Access time
Random DVD media
Full stroke DVD media
Random CD media
Full stroke CD media
< 150 ms
< 225 ms
< 110 ms
< 200 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
512 KB/s
Data transfer rate
Max 24X CD
Max 8X DVD
Multiword DMA mode 2
3600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1352 KB/s at 1X DVD rate)
16.6 MB/s
Startup time
< 10 seconds
Stop time
< 3 seconds
Maintenance and Service Guide
6–23
Specifications
Table 6-21
24X Max CD-ROM Drive
Applicable disc
DVD-5, DVD-9, DVD-10
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R (read only)
CD Plus
Photo CD (single/multisession)
CD-Bridge
Center hole diameter
1.5 cm
0.59 in
12 cm
8 cm
4.72 in
3.15 in
Disc thickness
1.2 mm
0.047 in
Track pitch
1.6 µm
Disc diameter
Standard disc
Mini disc
Access time
Random
Full stroke
< 150 ms
< 300 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
128 KB/s
Data transfer rate
Sustained (16X)
Variable
Multiword DMA mode 2
2400 KB/s
1500 to 3600 KB/s (10X to 24X)
16.6 MB/s
Startup time
< 8 seconds
Stop time
< 4 seconds
6–24
Maintenance and Service Guide
Specifications
Table 6-22
System DMA
Hardware DMA
System Function
DMA0
Available for audio
DMA1*
Entertainment audio
(default; alternate = DMA0, DMA3, none)
DMA2*
Diskette drive
DMA3
ECP parallel port LPT1
(default; alternate = DMA0, none)
DMA4
DMA controller cascading (not available)
DMA5*
Available for PC Card
DMA6
Not assigned
DMA7
Not assigned
*PC Card controller can use DMA 1, 2, or 5.
Maintenance and Service Guide
6–25
Specifications
Table 6-23
System Interrupts
Hardware IRQ
System Function
IRQ0
System timer
IRQ1
Keyboard controller
IRQ2
Cascaded
IRQ3
COM2
IRQ4
COM1
IRQ5
Audio (default)*
IRQ6
Diskette drive
IRQ7
Parallel port
IRQ8
Real time clock (RTC)
IRQ9
Infrared
IRQ10
System use
IRQ11
System use
IRQ12
Internal point stick or external mouse
IRQ13
Coprocessor (not available to any peripheral)
IRQ14
IDE interface (hard drive and optical drive)
IRQ15
System use
Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or
✎ PC
IRQ15. Either the infrared or the serial port may assert IRQ3 or IRQ4.
*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9,
IRQ10, or none.
6–26
Maintenance and Service Guide
Specifications
Table 6-24
System I/O Addresses
I/O Address
(hex)
System Function
(shipping configuration)
000—00F
DMA controller no. 1
010—01F
Unused
020—021
Interrupt controller no. 1
022—024
Opti chipset configuration registers
025—03F
Unused
02E—02F
87334 “Super I/O” configuration for CPU
040—05F
Counter/timer registers
044—05F
Unused
060
Keyboard controller
061
Port B
062—063
Unused
064
Keyboard controller
065—06F
Unused
070—071
NMI enable/real time clock (RTC)
072—07F
Unused
080—08F
DMA page registers
090—091
Unused
092
Port A
093—09F
Unused
0A0—0A1
Interrupt controller no. 2
Maintenance and Service Guide
6–27
Specifications
Table 6-24
System I/O Addresses (Continued)
I/O Address
(hex)
System Function
(shipping configuration)
0A2—0BF
Unused
0C0—0DF
DMA controller no. 2
0E0—0EF
Unused
0F0—0F1
Coprocessor busy clear/reset
0F2—0FF
Unused
100—16F
Unused
170—177
Secondary fixed disk controller
178—1EF
Unused
1F0—1F7
Primary fixed disk controller
1F8—200
Unused
201
Joystick (decoded in ESS1688)
202—21F
Unused
220—22F
Entertainment audio
230—26D
Unused
26E—26
Unused
278—27F
Unused
280—2AB
Unused
2A0—2A7
Unused
2A8—2E7
Unused
2E8—2EF
Reserved serial port
6–28
Maintenance and Service Guide
Specifications
Table 6-24
System I/O Addresses (Continued)
I/O Address
(hex)
System Function
(shipping configuration)
2F0—2F7
Unused
2F8—2FF
Infrared port
300—31F
Unused
320—36F
Unused
370—377
Secondary diskette drive controller
378—37F
Parallel port (LPT1/default)
380—387
Unused
388—38B
FM synthesizer—OPL3
38C—3AF
Unused
3B0—3BB
VGA
3BC—3BF
Reserved (parallel port/no EPP support)
3C0—3DF
VGA
3E0—3E1
PC Card controller in CPU
3E2—3E3
Unused
3E8—3EF
Internal modem
3F0—3F7
“A” diskette controller
3F8—3FF
Serial port (COM1/default)
CF8—CFB
PCI configuration index register (PCIDIVO-1)
CFC—CFF
PCI configuration data register (PCIDIVO-1)
Maintenance and Service Guide
6–29
A
Connector Pin Assignments
Table A-1
RJ-45 (Network)
Pin
Signal
Pin
Signal
1
Transmit +
5
Unused
2
Transmit –
6
Receive –
3
Receive +
7
Unused
4
Unused
8
Unused
Maintenance and Service Guide
A–1
Connector Pin Assignments
Table A-2
RJ-11 (Modem)
Pin
Signal
Pin
Signal
1
Unused
4
Unused
2
Tip
5
Unused
3
Ring
6
Unused
A–2
Maintenance and Service Guide
Connector Pin Assignments
Table A-3
IEEE 1394
Pin
Signal
Pin
Signal
1
S-GND
5
TPA-
2
GND
6
TPB-
3
TPB+
7
VP
4
TPA+
Maintenance and Service Guide
A–3
Connector Pin Assignments
Table A-4
Universal Serial Bus
Pin
Signal
Pin
Signal
1
+5 VDC
3
Data +
2
Data –
4
Ground
Table A-5
S-Video
Pin
Signal
Pin
Signal
1
Ground (Y)
3
Y-Luminance (Intensity)
2
Ground (C)
4
C-Chrominance (Color)
A–4
Maintenance and Service Guide
Connector Pin Assignments
Table A-6
External Monitor
Pin
Signal
Pin
Signal
1
Red analog
9
+5 VDC
2
Green analog
10
Ground
3
Blue analog
11
Monitor detect
4
Not connected
12
DDC 2B data
5
Ground
13
Horizontal sync
6
Ground analog
14
Vertical sync
7
Ground analog
15
DDC 2B clock
8
Ground analog
Maintenance and Service Guide
A–5
Connector Pin Assignments
Table A-7
Audio-Out (Headphone)
Pin
Signal
Pin
Signal
1
Ground
3
Right audio signal
2
Left audio signal
Table A-8
Audio-In (Microphone)
Pin
Signal
Pin
Signal
1
Audio in
2
Ground
A–6
Maintenance and Service Guide
Connector Pin Assignments
Table A-9
Parallel
Pin
Signal
Pin
Signal
1
Strobe
14
Auto linefeed
2
Data bit 0
15
Error
3
Data bit 1
16
Initialize paper
4
Data bit 2
17
Select in
5
Data bit 3
18
Ground
6
Data bit 4
19
Ground
7
Data bit 5
20
Ground
8
Data bit 6
21
+5VS
9
Data bit 7
22
PTF
10
Acknowledge
23
EXTFDD_VCC (+5V)
11
Busy
24
Ground
12
Paper end
25
Ground
13
Select
Maintenance and Service Guide
A–7
B
Power Cord Set Requirements
The wide range input feature of the notebook permits it
to operate from any line voltage from 100 to 120 or 220
to 240 V AC.
The power cord set included with the notebook meets the
requirements for use in the country where the equipment is
purchased.
Power cord sets for use in other countries must meet the
requirements of the country where the notebook is used.
General Requirements
The requirements listed below are applicable to all countries:
■
The length of the power cord set must be at least 1.5 m
(5.0 ft) and a maximum of 2.0 m (6.5 ft).
■
All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
■
The power cord sets must have a minimum current capacity
of 10 amps and a nominal voltage rating of 125 or 250 V AC,
as required by each country’s power system.
■
The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet C13
connector for mating with the appliance inlet on the back of
the notebook.
Maintenance and Service Guide
B–1
Power Cord Set Requirements
Country-Specific Requirements
3-Conductor Power Cord
Set Requirements
Applicable Note
Number
Country
Accredited Agency
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
The Netherlands
KEMA
1
Norway
NEMKO
1
Sweden
SEMKO
1
Switzerland
SEV
1
B–2
Maintenance and Service Guide
Power Cord Set Requirements
3-Conductor Power Cord
Set Requirements (Continued)
Applicable Note
Number
Country
Accredited Agency
United Kingdom
BSI
1
United States
UL
2
Notes
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm²
conductor size. Power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation in
the country where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a NEMA
5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark and
registration number in accordance with the Japanese Dentori Law. The
flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm² conductor
size. The wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
Maintenance and Service Guide
B–3
C
Screw Listing
This appendix provides specification and reference information
for the screws used in the notebook. All screws listed in this
appendix are available in the Miscellaneous Screw Kit:
■
Spare part number 350222-001 for use with HP Pavilion
zx5000 Series and zv50xx notebook models, HP Compaq
Business Notebook nx9110 model, and Compaq Presario
R3001, R3002, and R3010 notebook models.
■
Spare part number 360703-001 for use with HP Pavilion
zv51xx notebook models, HP Compaq Business Notebook
nx9105 model, and Compaq Presario R3004 and R31xx
notebook models.
Maintenance and Service Guide
C–1
Screw Listing
Table C-1
Phillips M2.5×6.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.0 mm
4.0 mm
Where used:
1 Two screws that secure the hard drive cover to the hard drive
(documented in Section 5.3)
2 One screw that secures the memory module compartment cover to the
notebook (documented in Section 5.5)
3 Two screws that secure the combination drive to the notebook
(documented in Section 5.6)
Phillips PM2.5×6.0 Screw Locations
C–2
Maintenance and Service Guide
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
Pavilion notebook models only
6 screws that secure the heat sink cover to the notebook
(documented in Section 5.7)
Phillips PM2.5×6.0 Screw Locations
Maintenance and Service Guide
C–3
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
HP Compaq Business Notebook nx9100 Series and Compaq Presario
R3000 Series models only
6 screws that secure the heat sink cover to the notebook
(documented in Section 5.7)
Phillips PM2.5×6.0 Screw Locations
C–4
Maintenance and Service Guide
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
4 screws that secure the display assembly to the notebook
(documented in Section 5.14)
Phillips PM2.5×6.0 Screw Locations
Maintenance and Service Guide
C–5
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
HP Pavilion notebook models only
4 screws that secure the display assembly to the notebook
(documented in Section 5.14)
Phillips PM2.5×6.0 Screw Locations
C–6
Maintenance and Service Guide
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
HP Compaq Business Notebook nx9100 Series and Compaq Presario
R3000 Series models only
1 screw that secures the display assembly to the notebook
(documented in Section 5.14)
Phillips PM2.5×6.0 Screw Locations
Maintenance and Service Guide
C–7
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
Pavilion notebook models only
3 screws that secure the base enclosure to the notebook
(documented in Section 5.15)
Phillips PM2.5×6.0 Screw Locations
C–8
Maintenance and Service Guide
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
HP Compaq Business Notebook nx9100 Series and Compaq Presario
R3000 Series models only
4 screws that secure the base enclosure to the notebook
(documented in Section 5.15)
Phillips PM2.5×6.0 Screw Locations
Maintenance and Service Guide
C–9
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
HP Pavilion zx5000 Series and zv50xx notebook models only
2 screws that secure the system board to the top cover
(documented in Section 5.19)
Phillips PM2.5×6.0 Screw Locations
C–10
Maintenance and Service Guide
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
HP Pavilion zv51xx notebook, Compaq Presario R3004 and R31xx
notebook, and HP Business Notebook nx9105 models only
One screw that secures the system board to the top cover
(documented in Section 5.19)
Phillips PM2.5×6.0 Screw Locations
Maintenance and Service Guide
C–11
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
Compaq Presario R3001, R3002, and R3010 notebook, and HP Business
Notebook nx9110 models only
One screw that secures the system board to the top cover
(documented in Section 5.19)
Phillips PM2.5×6.0 Screw Locations
C–12
Maintenance and Service Guide
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
Pavilion notebook models only
2 screws that secure the system board to the top cover
(documented in Section 5.19)
Phillips PM2.5×6.0 Screw Locations
Maintenance and Service Guide
C–13
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
Pavilion nx9000 and nx9110 and Presario notebook models only
3 screws that secure the system board to the top cover
(documented in Section 5.19)
Phillips PM2.5×6.0 Screw Locations
C–14
Maintenance and Service Guide
Screw Listing
Table C-1
Phillips PM2.5×6.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
46
6.0 mm
2.5 mm
4.0 mm
Where used:
4 screws that secure the processor bracket to the fan assembly
(documented in Section 5.20)
Phillips PM2.5×6.0 Screw Locations
Maintenance and Service Guide
C–15
Screw Listing
Table C-2
Phillips PM2.5×4.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
4
4.0 mm
2.5 mm
4.0 mm
Where used:
4 screws that secure the hard drive cover to the hard drive
(documented in Section 5.3)
Phillips PM2.5×4.0 Screw Locations
C–16
Maintenance and Service Guide
Screw Listing
Table C-3
Phillips PM2.0×3.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
6
3.0 mm
2.0 mm
4.0 mm
Where used:
4 screws that secure the diskette drive or HP USB Digital Bay drive to the
optical drive (documented in Section 5.6)
Phillips PM2.0×3.0 Screw Locations
Maintenance and Service Guide
C–17
Screw Listing
Table C-3
Phillips PM2.0×3.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
6
3.0 mm
2.0 mm
4.0 mm
Where used:
2 screws that secure the modem board to the system board
(documented in Section 5.11)
Phillips PM2.0×3.0 Screw Locations
C–18
Maintenance and Service Guide
Screw Listing
Table C-4
Phillips PM2.5×13.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
34
13.0 mm
2.5 mm
4.0 mm
Where used:
Pavilion notebook models only
4 screws that secure the heat sink cover to the notebook
(documented in Section 5.7)
Phillips PM2.5×13.0 Screw Locations
Maintenance and Service Guide
C–19
Screw Listing
Table C-4
Phillips PM2.5×13.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
34
13.0 mm
2.5 mm
4.0 mm
Where used:
HP Compaq Business Notebook nx9100 Series and
Compaq Presario R3000 Series models only
5 screws that secure the heat sink cover to the notebook
(documented in Section 5.7)
Phillips PM2.5×13.0 Screw Locations
C–20
Maintenance and Service Guide
Screw Listing
Table C-4
Phillips PM2.5×13.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
34
13.0 mm
2.5 mm
4.0 mm
Where used:
3 screws that secure the strip cover to the notebook
(documented in Section 5.9)
Phillips PM2.5×13.0 Screw Locations
Maintenance and Service Guide
C–21
Screw Listing
Table C-4
Phillips PM2.5×13.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
34
13.0 mm
2.5 mm
4.0 mm
Where used:
Pavilion notebook models only
10 screws that secure the base enclosure to the notebook
(documented in Section 5.15)
Phillips PM2.5×13.0 Screw Locations
C–22
Maintenance and Service Guide
Screw Listing
Table C-4
Phillips PM2.5×13.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
34
13.0 mm
2.5 mm
4.0 mm
Where used:
HP Compaq Business Notebook nx9100 Series and Compaq Presario
R3000 Series models only
9 screws that secure the base enclosure to the notebook
(documented in Section 5.15)
Phillips PM2.5×13.0 Screw Locations
Maintenance and Service Guide
C–23
Screw Listing
Table C-4
Phillips PM2.5×13.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
34
13.0 mm
2.5 mm
4.0 mm
Where used:
Pavilion notebook models only
2 screws that secure the system board to the top cover
(documented in Section 5.19)
Phillips PM2.5×13.0 Screw Locations
C–24
Maintenance and Service Guide
Screw Listing
Table C-4
Phillips PM2.5×13.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
34
13.0 mm
2.5 mm
4.0 mm
Where used:
HP Compaq nx9000 and nx9110 and Presario notebook models only
1 screw that secures the system board to the top cover
(documented in Section 5.19)
Phillips PM2.5×13.0 Screw Locations
Maintenance and Service Guide
C–25
Screw Listing
Table C-5
Phillips PM2.5×11.0 Spring-Loaded Shoulder Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
4
11.0 mm
2.5 mm
7.0 mm
Where used:
4 screws that secure the heat sink to the notebook
(documented in Section 5.7)
Phillips PM2.5×11.0 Spring-Loaded Shoulder Screw Locations
C–26
Maintenance and Service Guide
Screw Listing
Table C-6
Phillips PM2.5×3.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
5
3.0 mm
2.5 mm
4.0 mm
Where used:
4 screws that secure the keyboard to the notebook
(documented in Section 5.10)
Phillips PM2.5×3.0 Screw Locations
Maintenance and Service Guide
C–27
Screw Listing
Table C-6
Phillips PM2.5×3.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
5
3.0 mm
2.5 mm
4.0 mm
Where used:
HP Compaq Business Notebook nx9110 model and
Compaq Presario R3001, R3002, and R3010 notebook models
1 screw that secures the display cable ground loop to the notebook
(documented in Section 5.14)
Phillips PM2.5×3.0 Screw Locations
C–28
Maintenance and Service Guide
Table C-7
Phillips PM2.5×5.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
2
5.0 mm
2.5 mm
4.0 mm
Where used:
2 screws that secure the LED board to the top cover
(documented in Section 5.17)
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide
C–29
Table C-7
Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Silver
4
5.0 mm
2.5 mm
4.0 mm
Where used:
2 screws that secure the TouchPad board to the top cover
(documented in Section 5.18)
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide
C–30
Table C-7
Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Silver
4
5.0 mm
2.5 mm
4.0 mm
Where used:
2 screws that secure the TouchPad bracket to the top cover
(documented in Section 5.18)
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide
C–31
Screw Listing
Table C-7
Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
1
5.0 mm
2.5 mm
4.0 mm
Where used:
1 screw that secures the system board to the fan assembly
(documented in Section 5.20)
Phillips PM2.5×5.0 Screw Locations
C–32
Maintenance and Service Guide
Screw Listing
Table C-7
Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Silver
2
5.0 mm
2.5 mm
4.0 mm
Where used:
2 screws that secure the audio board to the chassis
(documented in Section 5.21)
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide
C–33
Screw Listing
Table C-8
Phillips PM1.5×10.0 Shoulder Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
2
10.0 mm
1.5 mm
3.0 mm
Where used:
Pavilion notebook models only
2 screws that secure the system board to the top cover
(documented in Section 5.19)
Phillips PM1.5×10.0 Shoulder Screw Locations
C–34
Maintenance and Service Guide
Screw Listing
Table C-9
M5.0×9.0 Standoff
mm
Color
Qty.
Length
Thread
Head
Width
Silver
4
9.0 mm
5.0 mm
5.0 mm
Where used:
Pavilion notebook models only
4 standoffs that secure the fan assembly to the system board
(documented in Section 5.20)
M5.0×9.0 Standoff Locations
Maintenance and Service Guide
C–35
Index
1394 bezel
illustrated 3–15, 3–17
spare part number 3–8,
3–18
1394 connector
location 1–9, 1–13
pin assignments A–3
5-in-1 Memory Reader 1–17,
1–23
A
AC adapter
spare part number 3–32
specifications 6–18
AC power connector, location
1–15
arrow keys, location 1–19
audio board
spare part number 3–4
audio troubleshooting 2–26
audio-in (microphone) jack
location 1–9, 1–13
pin assignments A–6
audio-out (headphone) jack
location 1–9, 1–13
pin assignments A–6
Maintenance and Service Guide
B
base enclosure
removal 5–47
spare part number 3–12,
3–14, 5–47
battery bay, location 1–27
battery cover
illustrated 3–15, 3–17,
3–29
spare part number 3–8,
3–18, 3–29
battery LED, location 1–7,
1–11
battery pack
illustrated 3–27
removal 5–6
spare part number 3–12,
3–14, 3–28, 5–5
specifications 6–18, 6–19,
6–20
battery pack cover, removal
5–7
battery release latch, location
1–27
Index–1
Index
bezel, 1394
illustrated 3–15, 3–17
spare part number 3–8,
3–18
bezel, front
illustrated 3–5, 3–7, 3–19,
3–21, 3–23
spare part number 3–6,
3–20
bottom components 1–26
C
cable kit, spare part number
3–14, 3–28
cable, entertainment, spare
part number 3–33
cable, Y, spare part number
3–33
cables, service considerations
4–2
caps lock key, location 1–19
caps lock LED, location 1–21,
1–25
carrying case, spare part
numbers 3–33
CD-ROM drive
illustrated 3–5, 3–7, 3–30
removal 5–16
spare part number 3–6,
3–8, 3–26, 3–31, 5–16
specifications 6–24
components
bottom 1–26
front 1–6, 1–10
keyboard 1–18
Index–2
left-side 1–14
rear 1–14
right-side 1–6, 1–10, 1–16
top 1–20
Computer Setup
Advanced Menu 2–6
File Menu 2–4
overview 2–2
Security Menu 2–5
configuration information 2–8
connector pin assignments
1394 A–3
audio-in (microphone) A–6
audio-out (headphone) A–6
external monitor A–5
parallel A–7
RJ-11 (modem) A–2
RJ-45 (network) A–1
S-Video A–4
USB A–4
connectors, service
considerations 4–2
cover, top, spare part number
3–4
D
design overview 1–28
diagnostics
configuration information
2–8
test information 2–9
Diagnostics for Windows 2–2,
2–8
disassembly sequence chart
5–3
Maintenance and Service Guide
Index
diskette drive
illustrated 3–3, 3–5, 3–7,
3–11, 3–13, 3–30
location 1–17
OS loading problems 2–24
removal 5–16
spare part number 3–4,
3–26, 3–30
display assembly
illustrated 3–3, 3–5, 3–7,
3–11, 3–13
removal 5–39
spare part number 3–4,
3–16, 5–39
specifications 6–9, 6–10,
6–11, 6–12, 6–13, 6–14,
6–15
display inverter, spare part
number 3–4, 3–16
display lid switch, location
1–23, 1–25
display release latch, location
1–7, 1–11
DMA specifications 6–25
drives, preventing damage 4–3
DVD+R/RW and CD-RW
Combo Drive
illustrated 3–5, 3–7
removal 5–16
spare part number 3–6,
3–8, 3–26, 3–31, 5–16
specifications 6–21
Maintenance and Service Guide
DVD/CD-RW Combo Drive
illustrated 3–5, 3–7
removal 5–16
spare part number 3–6,
3–8, 3–26, 3–31
specifications 6–22
DVD-ROM drive
illustrated 3–5, 3–7
removal 5–16
spare part number 3–6,
3–8, 3–26, 3–31, 5–16
specifications 6–23
E
electrostatic discharge 4–4,
4–9
entertainment cable, spare part
number 3–33
expansion port, location 1–9,
1–14
external components 1–6
external monitor port
location 1–15
pin assignments A–5
F
fan assembly
illustrated 3–5, 3–7
removal 5–76
spare part number 3–6,
3–22, 5–76
fan vent, location 1–27
features 1–3
Index–3
Index
feet, location 5–10
Fn key, location 1–19
front bezel
illustrated 3–5, 3–7, 3–19,
3–21, 3–23
spare part number 3–6,
3–20
front components 1–6, 1–10
G
grounding equipment and
methods 4–7
H
hard drive
illustrated 3–11, 3–13,
3–30
OS loading problems 2–21
removal 5–8
spare part number 3–10,
3–26, 3–30, 5–7
specifications 6–16
hard drive activity LED,
location 1–7, 1–11
hard drive bay, location 1–27
hard drive cover
illustrated 3–11, 3–13,
3–15, 3–17
removal 5–8
spare part number 3–18
headphone jack
location 1–9, 1–13
pin assignments A–6
Index–4
heat sink
illustrated 3–9
removal 5–21
spare part number 3–10,
3–26, 5–21
heat sink cover
illustrated 3–15, 3–17,
3–29
spare part number 3–8,
3–18, 3–29
HP USB Digital Drive
location 1–17
removal 5–16
spare part number 3–31
I
I/O address specifications
6–27
IDE LED, location 1–7, 1–11
illustrated parts catalog 3–1
infrared lens
illustrated 3–29
spare part number 3–29
infrared port, location 1–9,
1–13
internal keypad, location 1–19
Internet button, location 1–21
interrupt specifications 6–26
K
keyboard
illustrated 3–5, 3–7
removal 5–32
spare part number 3–6,
3–18, 5–32
troubleshooting 2–29
keyboard components 1–18
Maintenance and Service Guide
Index
L
label kits, spare part number
3–32
LED board
removal 5–53
spare part number 3–4,
5–53
LED locations 1–17, 1–23
left-side components 1–14
M
mass storage device
illustrated 3–11, 3–13,
3–30
removal 5–7
spare part number 3–10,
3–26, 3–30, 5–7
specifications 6–16
troubleshooting 2–21
Media button, location 1–21
memory module
removal 5–11
spare part number 3–12,
3–26, 5–11, 5–37
memory module compartment
cover
illustrated 3–15, 3–17,
3–29
spare part number 3–8,
3–18, 3–29
memory module compartment,
location 1–27
microphone jack
location 1–9, 1–13
pin assignements A–6
Maintenance and Service Guide
Mini PCI communications
card
illustrated 3–19, 3–21,
3–23
removal 5–35
spare part number 3–12,
3–20, 5–35
Miscellaneous Plastics Kit
components 3–29
illustrated 3–29
spare part number 3–18,
3–29
modem board
illustrated 3–9, 3–19, 3–21,
3–23
removal 5–34
spare part number 3–10,
3–20, 5–34
modem jack
location 1–15
pin assignments A–2
modem, troubleshooting 2–31
monitor port
location 1–15
pin assignments A–5
mute button, location 1–7,
1–11
N
network jack
location 1–14
pin assignments A–1
network, troubleshooting 2–31
nonfunctioning device,
troubleshooting 2–19, 2–28
Index–5
Index
notebook feet
illustrated 3–29
replacement 5–10
spare part number 3–29,
5–10
notebook specifications 6–1,
6–3, 6–5, 6–7
num lock key, location 1–19
num lock LED, location 1–21,
1–25
O
optical drive
illustrated 3–5, 3–7, 3–11,
3–13
removal 5–16
spare part number 3–6,
3–8, 3–26, 5–16
specifications 6–21, 6–22,
6–23, 6–24
optical drive activity LED,
location 1–7, 1–11
optical drive bay, location
1–17
OS loading, troubleshooting
2–20
P
packing precautions 4–5
parallel connector
location 1–15
pin assignments A–7
PC Card assembly, spare part
number 3–10
Index–6
PC Card eject buttons, location
1–17
PC Card slot space saver
illustrated 3–29
spare part number 3–8,
3–18, 3–29
PC Card slots, location 1–17
Picture button, location 1–21
plastic parts, service
considerations 4–2
pointing device,
troubleshooting 2–30
port replicator
spare part number 3–33
troubleshooting 2–19
power button, location 1–21,
1–25
power cord set
regulatory notices B–1
spare part numbers 3–32
power management features
1–5
power, troubleshooting 2–13
power/standby LED, location
1–7, 1–11
processor
removal 5–27
spare part number 3–12,
3–24, 5–27
processor support bracket
removal 5–27
spare part number 3–12,
5–27
Maintenance and Service Guide
Index
R
rear components 1–14
regulatory notices, power cord
set B–1
removal
preliminaries 4–1
procedures 5–1
replacement
preliminaries 4–1
procedures 5–1
right-side components 1–6,
1–10, 1–16
RJ-11 (modem) jack
location 1–15
pin assignments A–2
RJ-45 (network) jack
location 1–9, 1–14
pin assignments A–1
S
screw kit, spare part number
3–33
security cable slot, location
1–15
security card, spare part
number 3–33
serial number 5–2
serial number location 3–2,
5–2
service considerations 4–2
slot location 1–17
spare part numbers
1394 bezel 3–8
AC adapter 3–32
base enclosure 3–14, 5–47
battery cover 3–8
Maintenance and Service Guide
battery pack 3–14, 3–28,
5–5
cable kit 3–14, 3–28
carrying case 3–33
CD-ROM drive 3–6, 3–8,
3–26
diskette drive 3–4, 3–26,
3–30
display assembly 3–4,
3–16, 5–39
display inverter 3–4, 3–16
DVD+R/RW and CD-RW
Combo Drive 3–6, 3–8,
3–26
DVD/CD-RW Combo
Drive 3–6, 3–8, 3–26
DVD-ROM drive 3–6, 3–8,
3–26
entertainment cable 3–33
fan assembly 3–6, 3–22,
5–76
front bezel 3–6, 3–20
hard drive 3–10, 3–26,
3–30, 5–7
heat sink 3–10, 3–26, 5–21
heat sink cover 3–8
keyboard 3–6, 3–18, 5–32
label kit 3–32
LED board 3–4, 5–53
memory module 3–26,
5–11, 5–37
memory module
compartment cover 3–8
Mini PCI communications
card 3–20, 5–35
Index–7
Index
modem board 3–10, 3–20,
5–34
notebook feet 5–10
optical drives 5–16
PC Card assembly 3–10
PC Card slot space cover
3–8
plastics kit 3–18, 3–29
port replicator 3–33
processor 3–24, 5–27
processor support bracket
5–27
screw kit 3–33
security card 3–33
speaker assembly 3–8,
3–20, 5–50
strip cover 3–4, 3–18
system board 3–10, 5–64
thermal module 3–14, 3–28
top cover 3–4
TouchPad board 3–4, 5–57
upper logic audio board
3–4, 5–79
USB Digital Drive 3–31
USB mouse 3–33
wireless antennae cables
3–4, 3–16
Y cable 3–33
speaker assembly
illustrated 3–19, 3–21,
3–23
removal 5–50
spare part number 3–8,
3–20, 5–50
Index–8
specifications
battery pack 6–18, 6–19,
6–20
CD-ROM drive 6–24
display 6–9, 6–10, 6–11,
6–12, 6–13, 6–14, 6–15
DMA 6–25
DVD+R/RW and CD-RW
Combo Drive 6–21
DVD/CD-RW Combo
Drive 6–22
DVD-ROM drive 6–23
hard drive 6–16
I/O addresses 6–27
interrupts 6–26
notebook 6–1, 6–3, 6–5,
6–7
static shielding materials 4–9
stereo speakers, location 1–7,
1–11
strip cover
illustrated 3–5, 3–7, 3–11,
3–13, 3–15, 3–17, 3–29
removal 5–30
spare part number 3–4,
3–18, 3–29, 5–30
S-Video connector
location 1–9, 1–14
pin assignments A–4
system board
illustrated 3–9, 3–25
removal 5–64
spare part number 3–10,
5–64
Maintenance and Service Guide
Index
T
telephone jack
location 1–15
pin assignments A–2
thermal grease, replacement
5–26
thermal module, spare part
number 3–14, 3–28
tools required 4–1
top components 1–20
top cover, spare part number
3–4
TouchPad board
removal 5–57
spare part number 3–4,
5–57
TouchPad buttons, location
1–23, 1–25
TouchPad LED, location
1–23, 1–25
TouchPad scroll area, location
1–23, 1–25
TouchPad, location 1–23,
1–25
transporting precautions 4–5
troubleshooting
audio 2–26
Computer Setup 2–3
Diagnostics for Windows
2–8
initial 2–12
keyboard 2–29
modem 2–31
network 2–31
nonfunctioning device
2–19, 2–28
Maintenance and Service Guide
OS loading 2–20
pointing device 2–30
port replicator 2–19
power 2–13
video 2–17
troubleshooting flowcharts
2–11
U
upper logic audio board
removal 5–79
spare part number 3–4,
5–79
USB Digital Drive
location 1–17
removal 5–16
spare part number 3–31
USB mouse, spare part number
3–33
USB port
location 1–9, 1–13, 1–17
pin assignments A–4
V
vent, location 1–13, 1–15,
1–23, 1–27
video troubleshooting 2–17
volume buttons, location 1–7,
1–11
W
Windows applications key,
location 1–19
Windows logo key, location
1–19
wireless antennae cables, spare
part number 3–4, 3–16
Index–9
Index
wireless button, location 1–11,
1–21
wireless LED, location 1–11
workstation precautions 4–6
Y
Y cable, spare part number
3–33
Index–10
Maintenance and Service Guide
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising