advertisement
▼
Scroll to page 2
VX 1XN OPTICAL SWITCH DiCon’s VX Optical Switch utilizes a high resolution stepper motor to automate fiber connections. The VX optical switch can be built with single mode, multi-mode or polarization maintaining fiber. The switch is available in simplex 1xN sizes up to 1x50 or in a duplex configuration up to 1x25. Simplex 1xN Duplex 1xN FEATURES Low Crosstalk Available in Large Core Fiber Types Available up to 1x120 in a Rackmount APPLICATIONS Test and Measurement Secure Communications Fiber Sensing Specifications subject to change. Copyright © 2015 DiCon Fiberoptics, Inc. All rights reserved. OPTICAL SPECIFICATIONS1 ORDERING INFORMATION VX 5 PARAMETER RATING Insertion Loss2,3 1.0 dB max Crosstalk Back Singlemode Reflection Multimode 50μm Multimode 62.5μm PDL4,5 -80 dB max. -55 dB max. -25 dB max. -20 dB max. 0.10 dB max. Extinction Ratio 6 Switching Time Repeatability7 18 dB min. 300 ms + 16 ms per channel max. ±0.02 dB max. Durability Optical Power 8 Operating Temp Storage Temp 10 million cycles min. 300 mW max. 0 to 50 o C -20 to 70oC Product Code VX VX Switch Switch Configuration 1xN Simplex 1xN 1xN/DS Synchronous Duplex 1xN Fiber Type 1. Specifications are without connectors. 2. IL is measured at CWL, 23oC. 3. IL is for single-band. Dual-band adds 0.2 dB. 4. Singlemode only, 5. PDL is for single-band. Dual-band adds 0.05 dB. 6. Corning Panda PM 1550 fiber only 7. Repeatability is defined after 100 cycles. 8. High power version (1.5W) available as special order 9 50 62 PM 9μm core Corning SMF-28 50μm core 62.5μm core Panda 1550 with 400μm jacket Wavelength Range 8 13 15 16 8/13 13/15 15/16 850 nm1 1290 - 1330 nm 2 1530 - 1570 nm 3 1570 - 1610 nm 2 850 nm & 1310 nm1 1290 - 1330 & 1530 - 1570 nm 2 1530 - 1570 & 1570 - 1610 nm 2 Connector Type SPECIFICATIONS / ORDERING INFORMATION VX 1XN OPTICAL SWITCH FC/SPC FC/SPC FC/APC FC/APC N NONE Also Available: SC, SC/UPC, SC/APC, ST, ST/UPC, LC Fiber Jacket MECHANICAL DIMENSIONS CHASSIS #1 (Units: mm) 2 9 9LT 2.0 mm, loose tube 0.9 mm, tight buffer4 900 μm, loose tube Top View Pigtail Length 1 X 1 Meter Specify X Meters Tolerance is +/- 0.05 m 1. Multi-mode fiber only 2. 9/125μm SMF-28 fiber only 3. 9/125μm SMF-28 and Panda 1550 fiber only 4. 9/125μm SMF-28 and 62.5μm core fiber only PARAMETER Latching Type Control Type Vcc Voltage Power Consumption Connector Type Side View RATING non-latching TTL 12 VDC 3.6W max. Molex 22-12-2124 HOUSING SPECIFICATIONS Chassis Channel Count Width W Height H Depth D #1 Simplex 1 to 17 Duplex 1 to 8 #2 18 to 32 9 to 16 140.0 mm 23.6 mm 140.0 mm #3 33 to 50 17 to 25 190.0 mm 23.6 mm 175.0 mm 72.0 mm 23.6 mm 120.0 mm VX 1XN OPTICAL SWITCH ELECTRICAL SPECIFICATIONS DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510) 620-5000 Fax. (510) 620-4100 www.diconfiberoptics.com 0088D
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project