Denon | DVM-1835 - DVD Changer | Operating instructions | Denon DVM-1835 - DVD Changer Operating instructions

Denon DVM-1835 - DVD Changer Operating instructions
DVD VIDEO AUTO CHANGER
DVM-1835
Downloaded From Disc-Player.com Denon Manuals
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC
SHOCK
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IMPORTANT SAFEGUARDS
1) Read Instructions - All the safety and operating instructions should be read before the product is operated.
2) Retain Instructions - The safety and operating instructions should be retained for future reference.
3) Heed Warnings - All warnings on the product and in
the operating instructions should be adhered to.
4) Follow Instructions - All operating and use instructions should be followed.
5) Cleaning - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6) Attachments - Do not use attachments not recommended by the product manufacturer as they may
cause hazards.
7) Water and Moisture - Do not use this product near
water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or
near a swimming pool; and the like.
8) Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product
may fall, causing serious injury to a child or adult, and
serious damage to the product. Use only with a cart,
stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting
of the product should follow the manufacturer’s
instructions, and should use a mounting accessory
recommended by the manufacturer.
PORTABLE CART WARNING
9) A product and cart combination
(Symbol provided by RETAC)
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the product
and cart combination to overturn.
10) Ventilation - Slots and openings in
the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it
from overheating, and these open- S3125A
ings must not be blocked or covered. The openings
should never be blocked by placing the product on a
bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
11) Power Sources - This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
12) Grounding or Polarization - This product may be equipped
with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
Downloaded From Disc-Player.com Denon Manuals
13) Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
14) Lightning - For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet. This will prevent damage to the product
due to lightning and power-line surges.
15) Power lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry - Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of any kind on the product.
18) Servicing - Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into
the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the product to its normal operation.
e) If the product has been dropped or damaged in
any way.
f) When the product exhibits a distinct change in performance - this indicates a need for service.
20) Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product
is in proper operating condition.
22) Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
–2–
EN
PRECAUTIONS
CAUTION:
CAUTION:
LOCATION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE
INTO BEAM.
INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Non-use periods - Turn off the unit when it is not in use. Unplug the unit from the household AC outlet if it is
not to be used for a long time. Unplug the unit during lightning storms.
Please read this operating instructions carefully before using your DVD player, and keep it for future reference.
Important
Cautions on Installation
Use only discs marked with logos listed on page 6.
Power Supply
The main power supply is engaged when the main plug is
plugged in a 120V, 60Hz AC outlet. To operate the unit, press
the ON/STANDBY button to turn on the unit.
Warning
To avoid fire or electric shock, do not expose this unit to rain
or moisture.
WARNING:
LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
Noise or disturbance of the picture may be generated if this
unit or any other electronic equipment using microprocessors is used near a tuner or TV.
If this happens, take the following steps:
• Install this unit as far as possible from the tuner or TV.
• Set the antenna wires from the tuner or TV away from this
unit’s power cord and input/output connection cords.
• Noise or disturbance tends to occur particularly when using
indoor antennas or 300Ω/ohms feeder wires. We recommend
using outdoor antennas and 75Ω/ohms coaxial cables.
NOTE:
• For heat dispersal, do not install this equipment in a confined space such as a book case or similar unit.
Installation Location
10 cm or more
For safety and optimum performance of this unit:
• Do not stand the unit up vertically. Install the unit in a horizontal and stable position. Do not place anything directly on
top of the unit. Do not place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from sources
of intense heat. Avoid dusty or humid places. Avoid places
with insufficient ventilation for proper heat dissipation. Do not
block the ventilation holes on the sides of the unit. Avoid
locations subject to strong vibration or strong magnetic fields.
• Be sure to remove a disc and unplug the AC power cord
from the outlet before carrying the unit.
Downloaded From Disc-Player.com Denon Manuals
–3–
DVD VIDEO AUTO CHANGER
DVM-1835
OPEN / CLOSE
5 DVD Video Automatic Disc Loading System
PLAY
STILL / PAUSE
DISC SELECT
STOP
1
1
3
5
2
2
4
3
4
5
SKIP
DISC EXCHANGE
Wall
EN
English
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.
PRECAUTIONS
Dew Warning
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating a
cold room or under conditions of high humidity. Do not use the
DVD Player at least for 2 hours until its inside is dry.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from
AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the
power cord immediately and take the unit to our Authorized
Service Center for servicing.
Caution
1) Do not attempt to open the cabinet. There are no parts
you can service inside. Refer all servicing to qualified service personnel.
2) Slot and openings in the cabinet and at the side or bottom
are provided for ventilation. To ensure reliable operation
and to protect the unit from overheating these opening
must not be blocked or covered. Avoid enclosed spaces
such as book cases unless proper ventilation is provided.
3) Keep the unit away from the radiator heat sources.
4) Avoid using near strong magnetic fields.
5) Do not push objects of any kind into this through the cabinet slot as they could touch current carrying parts or
short circuit parts resulting in a fire or electric shock.
6) Never spill liquid of any kind on this unit.
If liquid is spilled into the unit, consult qualified service
engineer.
7) Use this unit in a horizontal (flat) position only.
8) This equipment is in Stand-by mode when it turns off
whilst the power cord is connected.
9) Keep the set free from moisture,water and dust.
10) Handle the power cord carefully. Hold the plug when
unplugging the code.
11) All the safety cautions and operating instructions should
be read before the DVD player is operated.
12) Use caution not to pinch your finger in the disc slot.
13) Do not put heavy objects on the AC power cord.
14) Keep the AC power cord away from heat appliances.
15) Be sure to remove a disc and unplug the AC power cord
from the outlet before carrying the DVD player.
16) Do not put any pressure to the DVD player when carrying.
17) Do not use the DVD player outdoors.
TABLE OF CONTENTS
■ IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . 2
■ PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
■ INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notice for the Progressive Scan Outputs . . . . . . . . . . . . 5
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Symbols Used in this Manual. . . . . . . . . . . . . . . . . . . . . 5
■ ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
■ FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
■ FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . 8
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tour of the remote control . . . . . . . . . . . . . . . . . . . . . . . 9
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Displays During Operation . . . . . . . . . . . . . . . . . . . . . . 11
Loading the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 11
■ HOOK UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Description - rear panel . . . . . . . . . . . . . . . . . . . . . . . . 12
Connection to an audio system . . . . . . . . . . . . . . . . . . 13
Connection to a TV (for video) . . . . . . . . . . . . . . . . . . . 14
■ PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Brightness of the Front Display . . . . . . . . . . . . . . . . . . 15
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
CALLING UP A MENU SCREEN DURING
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . 15
Resume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . . 16
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . 16
Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . 17
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Downloaded From Disc-Player.com Denon Manuals
■
■
■
■
–4–
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REPEAT TITLE / CHAPTER. . . . . . . . . . . . . . . . . . .
REPEAT TRACK . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Program Playback (CD) . . . . . . . . . . . . . . . . . . . . . . . .
Random Playback (CD) . . . . . . . . . . . . . . . . . . . . . . . .
MP3 / JPEG / WMA Playback . . . . . . . . . . . . . . . . . . .
Slide Show Mode (JPEG) . . . . . . . . . . . . . . . . . . . . . .
On-Screen Information. . . . . . . . . . . . . . . . . . . . . . . . .
Track Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Random Playback (MP3 / JPEG / WMA) . . . . . . . . . . .
Program Playback (MP3 / JPEG / WMA) . . . . . . . . . . .
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . .
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the On-Screen Display . . . . . . . . . . . . . . . . .
Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . .
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . .
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ratings Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RATING LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IF YOU FORGET THE PASSWORD . . . . . . . . . . . . .
CONTROL LEVELS . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . .
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
17
18
18
18
18
19
20
20
20
20
21
21
21
22
22
22
23
23
23
24
24
24
25
25
25
25
25
27
28
29
EN
The serial number of this product may be found on the back of the DVD player. No others have the same serial
number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Apparatus Claimas of U. S. Patent Nos, 4,631,603, 4,577,216, 4,819,098, and 4,907,093 licensed for limited
viewing uses only.
Notice for the Progressive Scan Outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525 progressive scan output, it is
recommended that the user switch the connection to the ‘standard definition’ output. If there are questions
regarding your TV set compatibility with this 525p DVD player, please contact our customer service center.
Supplied Accessories
Please check to make sure the following items are included with the main unit in the carton.
2
5
1
4
7
ENT
ER
0
8
+1
0
9
6
3
Operating
Service Station Warranty
Remote
Video
“AA” (R6P) Audio
control • • • • • • 1 batteries • • • • 2 cable • • • • • • • 1 cable • • • • • • • • 1 Instructions • • 1 List • • • • • • • • • 1 Card • • • • • • • • 1
Symbols Used in this Manual
The following symbols appear below in some headings and notes in this manual, with the following meanings.
DVD
:
Description refers to playback of DVD-Video discs. (including DVD-R/RW discs)
CD
:
Description refers to playback of Audio CDs.
MP3
:
Description refers to playback of discs formatted with MP3.
JPEG
:
Description refers to viewing of JPEG discs.
WMA
:
Description refers to playback of discs formatted with WMA.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details.
Downloaded From Disc-Player.com Denon Manuals
–5–
EN
English
INTRODUCTION
ABOUT THE DISCS
Playable Discs
Playable
discs
Mark (logo)
Region code
Recorded
signals
Disc size
or
Digital video
(MPEG2)
12 cm
or
8 cm
-
Digital audio
Disc types
DVD-Video
* 1, 2, 3, 5
DVD-RW
DVD-R
Example
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
* 1, 3, 4, 5,
6, 7, 8
Audio CD
* 3, 5
Audio CD
CD-RW
CD-R
-
* 3, 4, 5, 7,
8
Digital audio
MP3
WMA*9
Digital picture
(JPEG)
12 cm
or
8 cm
Example
Track 1
MP3,
JPEG,
WMA
Example
Track 1
Picture CD
-
JPEG
Track 2
Track 3
Track 4
Track 5
Track 4
Track 5
Group 1
Track 2
Track 3
Track 6
Group 2
Track 6
12 cm
* 3, 4, 5, 7,
8
is a trademark of DVD Format/Logo Licensing Corporation.
is trademark of Eastman Kodak Company.
Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot
be played back.
*2: Certain DVD discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Scratched or stained discs may not be played back.
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not
play them back. Even if they are played back, the sound or video quality will be compromised.
*6: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be
played back at all or normally (the picture or sound may be distorted, etc.).
*7: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may not
play back properly.
*8: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
*9: This player cannot play the disc contents protected by Windows Media Digital Rights Management (DRM).
¡ NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL /
DVD-ROM for personal computers / CD-ROM for personal computers
¡ On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTES:
• Only the sound recorded on the normal CD layer can be delivered.
• The sound recorded on the high density Super Audio CD layer cannot be delivered.
¡ Any other discs without compatibility indications
CAUTION:
• Use caution not to pinch your finger in the disc slot.
• Be sure to remove a disc and unplug the AC power cord from the outlet before carrying the DVD player.
Downloaded From Disc-Player.com Denon Manuals
–6–
EN
¡Progressive Scan system
Unlike conventional interlace scanning, the progressive scan system provides less flickering and images
in higher resolution than that of traditional television
signals.
¡Dolby Digital sound
This player can handle Dolby Digital surround sound
having Multi-channels when connected to a Dolby
Digital decoder.
¡Still/fast/slow/step playback
Various playback modes are available including still
pictures, fast forward/reverse, slow motion and step
frames.
¡Random playback for Audio CD, MP3, JPEG, and
WMA
This player can shuffle the order of tracks to play
them in random order.
¡Program playback for Audio CD, MP3, JPEG, and
WMA
You can program the order of tracks to play them in
any desired order.
¡DVD menus in a desired language
You can display DVD menus in a desired language, if
available on a DVD.
¡Auto standby
When the screen saver program is activated for 35
minutes, the power is automatically turned off.
¡Subtitles in a desired language
You can select a desired language for the display
subtitles if that language is available on a disc.
¡Selecting a camera angle
You can select the desired camera angle if a disc
contains sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select the desired audio language and
sound mode if different languages and modes are
available on a disc.
¡Parental lock
You can set the control level to limit playback of discs
which may not be suitable for children.
¡Automatic detection of discs
This player automatically detects if a loaded disc is
DVD-Video, Audio CD, MP3, JPEG, or WMA.
¡Playing an MP3 disc
You can enjoy MP3 files which are recorded on CDR/RW.
¡Direct Search
You can search the desired title, chapter, and track
with the numeric buttons during playback or in stop
mode.
¡On-screen display
Information about the current operation can be displayed on a TV screen, allowing you to confirm the
currently active functions (such as program playback), using the remote control.
¡DTS (Digital Theater System)
When this player is connected to a DTS decorder,
you can enjoy 5.1channel surround system developed by the Digital Theater Systems, Inc. which
reproduces the original sound as truthfully as possible.
Downloaded From Disc-Player.com Denon Manuals
¡Search
Chapter search:Search for the chapter designated by
user is possible.
Title search: Search for the title designated by user
is possible.
Track search: Search for the track designated by
user is possible.
Time search: Search for the time designated by
user is possible.
¡Repeat
Chapter:
Repeated playback of the chapter of
the disc being played is possible.
Title:
Repeated playback of the title of the
disc being played is possible.
Track:
Repeated playback of the track of the
disc being played is possible.
Disc (Audio CD): Repeated playback is possible.
(MP3/JPEG/WMA): Repeated playback is possible.
A-B:
The part between A and B designated
by user is possible.
Group:
Repeated playback of the folder of the
MP3/JPEG/WMA disc being played is
possible.
5 Disc:
Repeated playback of Audio CD/
MP3/ JPEG/ WMA discs is possible.
¡Zoom
2-time or 4-time magnified screen can be displayed.
¡Marker
The part designated by user can be called back.
¡Resume playback
User can resume playback from the part at which the
play was stopped even if the power is turned off.
¡Component Video Out Jacks
Jacks located on the back of the DVD Player which
are used to send high-quality video to a TV via
Component Video In Jacks.
¡Dimmer
Brightness of the display can be varied.
¡Bit rate indication
¡DRC (Dynamic range control)
You can control the range of sound volume.
¡Displaying a JPEG picture
Kodak Picture CD can be played. Still images stored
in JPEG format on CD-R/RW can also be played.
¡Reproducing WMA data
You can enjoy WMA files which are recorded on
CD-R/RW.
–7–
“WMA” (Windows Media Audio) is an audio
codec developed by Microsoft® in the United
States of America.
EN
English
FEATURES
FUNCTIONAL OVERVIEW
FRONT PANEL
1
3 32
2
DVD VIDEO AUTO CHANGER
DVM-1835
OPEN / CLOSE
5 DVD Video Automatic Disc Loading System
PLAY
STILL / PAUSE
DISC SELECT
STOP
1
1
3
5
15
2
2
4
3
4
5
SKIP
DISC EXCHANGE
4 5 6
12/24 13
11/25
14
REMOTE CONTROL
31
1
3
16
1
2
3
17
4
5
6
7
8
9
0
+10
18
19
20
21
8
10
30
29
8.
9.
10.
11.
28
12.
27
26
13.
ENTER
7
22
14
1.
2.
3.
4.
5.
6.
7.
9
32
23
12
6
13
11
4
24
25
5
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
The buttons with circled numbers can only be
operated with the remote control.
Downloaded From Disc-Player.com Denon Manuals
30.
31.
32.
–8–
ON/STANDBY, (POWER ON/OFF) Buttons [page 15]
Disc loading tray
OPEN/CLOSE Button [page 15]
PLAY Button [page 15]
STILL/PAUSE Button [page 15]
STOP Button [page 15]
Cursor Buttons [page 15]
Use when making settings while watching the display on
a TV screen.
MENU Button [page 15]
SETUP Button [page 24]
ENTER Button [page 15]
G (SKIP) Button [page 17]
Plays back from the beginning of the next chapter or track.
H (SKIP) Button [page 17]
Plays back from the beginning of the current chapter or track.
DISC EXCHANGE Button [page 15]
Press to change discs during playback.
DISC SKIP Button [page 15]
Press to select a desired disc or disc tray.
Display, Remote Sensor Window
A-B REPEAT Button [page 18]
REPEAT Button [page 17]
RANDOM Button [page 18,20]
ZOOM Button [page 16]
CLEAR Button [page 17]
ANGLE Button [page 22]
Press to change the camera angle to see the sequence
being played back from a different angle.
RETURN Button [page 21]
SEARCH MODE Button [page 17]
h (Fast Reverse SEARCH) Button [page 16]
Press more than 2 seconds when you use the front
panel button for this function.
g (Fast Forward SEARCH) Button [page 16]
Press more than 2 seconds when you use the front
panel button for this function.
SUBTITLE Button [page 22]
Press to select a desired subtitle language.
TOP MENU Button [page 15]
DISPLAY Button [page 20]
AUDIO Button [page 21]
Press to select a desired audio language or sound mode.
Numeric Buttons [page 17]
MODE Button [page 20]
DISC NUMBER Buttons [page 15]
Press to select a desired disc or disc tray directly.
EN
FUNCTIONAL OVERVIEW
Tour of the remote control
DVD
English
Buttons on remote control work in different ways for DVD, Audio CD, MP3, JPEG and WMA :
Refer to the following table for correct use.
CD/MP3/JPEG/WMA
POWER Buttons
· To switch the power between on and
standby.
A-B REPEAT Button
· To switch the power between on and
standby.
· To mark a segment between A and B for
repeated playback.
· To mark a segment between A and B for
repeated playback. (CD)
REPEAT Button
· To repeat playback of a title or chapter.
· To repeat playback of a track or disc. (CD)
· To repeat playback of a track, group or disc.
(MP3, JPEG, WMA)
RANDOM Button
· To play back tracks in random order.
MODE Button
· To set black level on/off.
· To activate the 3D sound (Virtual
surround system).
· To program a specific playback order.
· To activate the 3D sound (Virtual surround
system). (CD, MP3, WMA)
ZOOM Button
· To magnify part of the picture (x2/x4).
ANGLE Button
· To access various camera angles on the
disc.
SUBTITLE Button
· To access various subtitles on the disc.
AUDIO Button
· To access various audio functions on the
disc.
· To select STEREO, L-CH or R-CH. (CD)
DISPLAY Button
· To display the current disc mode.
SEARCH MODE Button
· To display the current disc mode.
· To search for a chapter, title, time or
· To search for a track.
marker.
· To search for time or a marker. (CD)
· To return to a location on the disc rapidly. · To return to a location on the disc rapidly.
OPEN/CLOSE Button
· To open or close the disc tray.
· To open or close the disc tray.
· To select a chapter or title directly.
· To select a track directly.
· To clear the markers.
· To clear the numbers entered incorrectly.
· To cancel the A point for A-B Repeat.
· To clear the markers. (CD)
· To clear the numbers entered incorrectly.
· To cancel the A point for A-B Repeat. (CD)
NUMERIC Buttons
CLEAR Button
Downloaded From Disc-Player.com Denon Manuals
–9–
EN
FUNCTIONAL OVERVIEW
Tour of the remote control
DVD
CD/MP3/JPEG/WMA
MENU Button
· To call up the menu on a disc.
TOP MENU Button
· To call up the top menu on a disc.
ENTER, CURSOR Buttons
· To move the cursor and determine its
position.
RETURN Button
· To return to the previous operation in the
setup menu.
· To move the cursor and determine its position.
· To return to the previous operation in the
setup menu.
SETUP Button
· To call up the setup menu.
· To call up the setup menu.
· To skip chapters/titles.
· To skip tracks.
· To begin fast forward/reverse search or
· To begin fast forward/reverse search.
SKIP Buttons
SEARCH Buttons
slow forward/slow reverse.
(CD, MP3, WMA)
STOP Button
· To stop playback.
· To stop playback.
· To begin playback.
· To begin playback.
· To pause playback.
· To advance playback frame by frame.
· To pause playback.
· To select a desired disc.
· To select a desired disc.
· To select a desired disc directly.
· To select a desired disc directly.
· To change discs during playback.
· To change discs during playback.
PLAY Button
STILL/PAUSE Button
DISC SKIP Button
DISC NUMBER Buttons
DISC EXCHANGE Button
Downloaded From Disc-Player.com Denon Manuals
– 10 –
EN
FUNCTIONAL OVERVIEW
Display
Stays on when
the repeat function is on.
1
Stays on when
the A-B repeat
function is on.
3
2
4
English
Stays on when repeat chapter function is on.
Stays on when repeat track function is on.
Lights up when a DVD is inserted into the tray.
Stays on when repeat
title function is on.
The playing disc
number flashes on.
5
Stays on when the inserted
disc is being played back.
Lights up when a CD is
inserted into the tray.
Lights up when the
inserted disc comes
to a pause.
Displays how long a current title or track has been
played back. When a chapter or track has switched,
the number of a new title, chapter or track is displayed.
Displays During Operation
Loading the Batteries
1. Open the battery compartment cover.
Power on
No disc inserted
2. Insert two “AA” (R6P) batteries, with
each one oriented correctly.
Tray open
Tray closed
3. Close the cover.
Loading the Disc
NOTES
Power off
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
Tray rotation
Cautions On Batteries
AC cord plugged in
Downloaded From Disc-Player.com Denon Manuals
• Use “AA” (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximately
once a year, though this depends on the frequency
with which the remote control unit is used.
• If the remote control unit does not operate close to
the main unit, replace the batteries with new ones,
even if less then a year has passed.
• The included batteries serve only for verifying operation. Replace them with new batteries as soon as
possible.
• When inserting the batteries, be careful to do so in
the proper direction, following the
and
marks
in the remote control unit’s battery compartment.
• To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose
of batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
– 11 –
EN
HOOK UPS
Description - rear panel
ROOM TO ROOM
6
3
4
5
2
1
7
1. DIGITAL OUT JACKS
Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to a Dolby
Digital decoder or DTS decoder.
2. AUDIO OUT JACKS
Connect to the Audio input jacks of A/V-compatible TV or wide screen TV, or Stereo system.
3. VIDEO OUT JACK
Use a video cable to connect one of the jack to Video input on your A/V-compatible TV or wide screen TV, or Stereo
system.
4. COMPONENT VIDEO OUT JACKS
Use these jacks if you have a TV with Component Video in jacks. These jacks provide CR/PR, CB/PB and Y video. Along
with S-Video, Component Video provides the best picture quality.
5. S-VIDEO OUT JACK
Use the S-Video cable to connect this jack to the S-Video jack on your A/V-compatible TV or wide screen TV for a higher
quality picture.
6. PROGRESSIVE switch
7. REMOTE CONTROL JACKS
Connecting the DENON Satellite Remote Control to these jacks enables you to operate more than one DENON components with one remote control.
When using the DENON Satellite Remote Control,
1. Connect the DENON Satellite Remote Control to the REMOTE CONTROL IN jack of this player. This allows you to operate this player with the Satellite Remote Control.
2. Connect another DENON component to the REMOTE CONTROL OUT jack of this player. This allows you to operate this
player and the connected component with the same Satellite Remote Control.
Selecting Progressive Scan (525p/480p or Interlaced 525i/480i) Playback
¡If your TV is compatible with progressive scanning (525p/480p), connect the TV to the COMPONENT VIDEO OUT jacks of
the DVD player and set the Progressive switch on the back of the DVD player to “PROGRESSIVE”. Next, set your TV to the
progressive scan mode.
If your TV is not compatible with progressive scan, keep the Progressive switch to “INTERLACE”.
¡Use a commercially available adaptor if the video input jacks of your TVs or monitors are the BNC type.
What is Progressive Scanning?
¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution
than that of traditional (525i/480i) television signals.
NOTE
• When the Progressive switch is set to “PROGRESSIVE”, no video signal will be output from the VIDEO OUT or S-VIDEO
OUT jack.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
Downloaded From Disc-Player.com Denon Manuals
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
– 12 –
EN
The following show examples of connections commonly used to connect the DVD player to TV and other components.
If using this DVD player to play back a DVD in a Dolby Digital Multi-channel surround or DTS surround format,
the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.
By hooking up the player to a Dolby Digital or DTS decoder, you can enjoy more convincing, realistic ambience
with powerful and high-quality surrounding sound of a professional standard which can be heard in movie theaters.
Use a commercially available audio optical or coaxial digital cable (not included) for the audio connections.
Notes
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
DVD player.
Connection to an audio system
Method 1
Method 2
Dolby Digital decoder
or
DTS decoder
Stereo system
AUDIO
Digital Audio Input
Jacks
Audio Input Jacks
Audio Coaxial
Digital cable
(commercially
available)
Audio cable
(supplied)
DVD
AUDIO OUT
(analog)
Optical cable
(commercially
available)
DIGITAL OUT
• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + Dolby Digital decoder or DTS decoder
NOTES
• If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to ON for audio output in the setup
mode. (Refer to page 25)
• If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode. (Refer to page 25)
• Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to OFF for audio output in the setup
mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to page 25)
• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD
or DAT deck.
• Set Dolby Digital and DTS to OFF for audio output in the setup mode for method 1 only. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to page 25)
• Harsh noise that could harm your ears or the speakers is generated when a DVD recorded in DTS is played while using a
decoder, etc., that is not DTS-compatible.
• When playing a copyright-protected 96kHz PCM DVD, the digital sound will be down sampled at 48kHz, even if you set
“LPCM SELECT” to “OFF” (Refer to page 25).
Optical cable (not supplied)
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 6 inches (15 cm) or more when storing them.
• Use a cable which is 9.8 feet (3 m) or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
Downloaded From Disc-Player.com Denon Manuals
– 13 –
EN
English
HOOK UPS
HOOK UPS
Connection to a TV (for video)
Basic Audio
TV
R
Method 1
Method 2
Method 3
Good picture
Better picture
Best picture
VIDEO IN
S-VIDEO IN
COMPONENT
VIDEO IN
L
Audio
Cable
(supplied)
S-Video Cable
(commercially
available)
Video
Cable
(supplied)
CR/PR
Y
CB/PB
Component
Video
Cable
(commercially
available)
DVD
AUDIO OUT
(analog)
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
• Method 3 DVD Player + TV with Component Video Jacks
NOTES
• If your TV is compatible with progressive scanning (525p/480p), connect the TV to the Component Video Output jacks of
the DVD player. Refer to page 12.
• Connect the DVD player directly to a TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due
to the copy protection system.
• S-Video output connector
The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with a S-Video input connector, we recommend connecting it to the this product’s S-Video output
connector using a commercially available S-Video connection cord.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not included. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and
then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that
cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator
(usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.
NOTE
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
Downloaded From Disc-Player.com Denon Manuals
– 14 –
EN
PLAYING A DISC
DVD
CD
Pause
MP3
JPEG
WMA
•
•
DVD
CD
MP3
JPEG
WMA
1 During playback, press the
Getting started
STILL/PAUSE button.
Turn on the power of the TV, amplifier and any other components which are connected to the DVD player.
Make sure the TV and audio receiver (commercially available) are set to the correct channel.
F
• Playback will pause and sound
will be muted.
1 Press the POWER ON button.
• “P-ON” will appear briefly on the display panel.
2 Press the OPEN/CLOSE button to open disc load-
ing tray.
2 To continue playback, press the PLAY button.
3 Press the DISC SKIP button repeatedly or press
the DISC NUMBER button.
Disc Menus
• The desired disc tray moves to the front position.
4 Place the disc in the tray,
DVD
with the label facing up.
• Repeat steps 3 and 4 to
load more discs.
1 Press the MENU button.
• The DVD main menu will appear.
2 If the feature is not available,
symbol may
appear on the TV screen.
3 If disc menu is available on the disc, audio language, subtitle options, chapters for the title and
other options will appear for selection.
4 Press the Cursor buttons ( L / K / B / s ) to select
an item, and the ENTER button to confirm selection.
Right side tray
Left side tray
5 Press the PLAY button.
• The tray will close automatically, and playback will start
from the first chapter or track of the disc. If the playback
does not start automatically, press the PLAY button.
• If the disc has not been set on the tray, the DVD player
will play the disc which is set on the right side tray.
• When you want to select the other disc, press the DISC
SKIP button repeatedly or the DISC NUMBER button
for your desired disc.
• When you playback the DVD with a title menu, it may
appear on the screen. In this case, refer to “Title
Menu”.
6 Press the STOP button to stop playback.
Title Menu
DVD
1 Press the TOP MENU button.
• The title menu will appear.
2 If the feature is not available,
NOTES:
• A “prohibited icon” may appear
at the top-right on the TV screen
during operation, warning that a
prohibited operation has been
encountered by the DVD player
or the disc.
• With DVDs that use some titles
for playback program signals,
playback may start from the second title, or it may skip
these titles.
• During the playback of two layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
• During the playback of a DVD-RW which has been
recorded in the VR mode, the sound or picture may
freeze momentarily depended on disc content.
• You can open the tray and change 2 discs during playback by pressing the DISC EXCHANGE button.
• Disc position will be displayed on the TV screen for
about 5 minutes when you turn on the power or close
the tray.
symbol may
appear on the TV screen.
3 Press the Cursor buttons ( L / K / B / s ) to select
an item, and the ENTER button to confirm the
selection.
• Playback will begin at the selected Title.
CALLING UP A MENU SCREEN DURING PLAYBACK
•
•
Press the MENU button to call up the DVD main menu.
Press the TOP MENU button to call up the title menu.
NOTE:
• Contents of menus and corresponding menu operations may vary between discs. Refer to the manual
accompanying the disc for details.
Step by Step Playback
DVD
1 During playback, press the
STILL/PAUSE button.
General Features
• Playback will pause and sound
will be muted.
DVD
DVD may contain menus to navigate the disc and access
special features. Press the appropriate Numeric buttons or
use the Cursor buttons ( L / K / B / s ) to highlight your
selection in the DVD main menu and press the ENTER button to confirm.
F
2 The disc advances by one frame each time the
STILL/PAUSE button is pressed.
NOTE:
3 To exit step by step playback, press the PLAY but-
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
ton.
Brightness of the Front Display
The brightness of the front display can be adjusted from the
SETUP menu. Details are on page 24.
Downloaded From Disc-Player.com Denon Manuals
– 15 –
EN
English
Basic Playback
PLAYING A DISC
Resume
DVD
Zoom
CD
MP3
JPEG
1 During playback, press the
WMA
STOP button.
• Resume message will appear on
the TV screen.
DVD
The Zoom function allows you to enlarge
the video image and to pan through the enlarged image.
1 Press the ZOOM button during playback.
• Playback will continue.
2 Press the ZOOM button repeatedly to select the
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
required zoom factor: x2, x4 or OFF.
2 Press the PLAY button, playback will resume from
the point at which playback was stopped.
x2
x4
• To cancel resume, press the STOP button twice.
NOTES:
• The resume playback takes a little longer to take place
compared to the normal playback.
• For MP3, JPEG or WMA, playback will resume from the
beginning of the current track.
3 Use the Cursor buttons ( L / K / B / s ) to move
the zoomed picture across the screen.
Fast Forward / Reverse Search
DVD
CD
MP3
WMA
1 During playback, press the g or h button
repeatedly to select the required forward or reverse
speed: x2, x8, x50, x100.
• For Audio CDs, the speed is fixed at x16.
• For MP3 and WMA the speed is fixed at x8.
Button
2
8
50
100
2 To return to normal playback, press the PLAY
4 To exit zoom mode, press the ZOOM button to
button.
OFF.
NOTES:
Slow Forward / Slow Reverse
DVD
• Zooming function does not work while disc menu is
shown.
• x4 zoom is not available on some discs.
1 During playback, press the STILL/PAUSE button.
2 Press the g or h button.
• Slow motion playback will begin and sound will be muted.
3 Press the g or h button
repeatedly to select the
required speed: 1/16, 1/8, 1/2
of the normal playback.
4 To return to normal playback,
press the PLAY button.
D Button
1/16
1/8
1/2
Downloaded From Disc-Player.com Denon Manuals
– 16 –
EN
PLAYING A DISC
CD
MP3
JPEG
• Depending on the disc being played, the Numeric
buttons can be used to search for a desired chapter by
entering the chapter number directly. Refer to the manual accompanying the disc.
• The SKIP H and G buttons are not available when
playback is stopped.
• A disc that does not contain chapters within titles, the
SKIP H and G buttons change the titles.
WMA
There are three ways to begin playback on an Audio CD,
MP3, JPEG or WMA disc at a specific track.
By using the Numeric buttons
1 Press the Numeric buttons to enter the desired
Time Search
track number.
• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number (eg.
track 3, press 3).
• To play track 26, press +10, 2, 6.
DVD
1 During playback, press the SEARCH MODE button
three times to display the Time Search on the TV
screen.
2 Within 30 seconds, enter a
_:__:__
1:23:45
desired disc time with the
Numeric buttons.
By using the SEARCH MODE button
CD
1 Press the SEARCH MODE button.
• The track search display appears.
• Playback will start at the specified
time.
__/ 15
3 Press the CLEAR button to erase the incorrect
input.
2 Within 30 seconds, select a desired track number using
the Numeric buttons. For single digits press 0 first.
• Playback will start at the selected track.
• Press the CLEAR button to erase the incorrect input.
CD
1 During playback, press the SEARCH MODE button
twice to display the Time Search on the TV screen.
2 Within 30 seconds, enter a desired disc time with
the Numeric buttons.
By using the SKIP buttons H G
• Playback will start at the specified time.
During playback, press the SKIP G button to move to the
next track. Press it repeatedly to skip subsequent tracks.
Press the SKIP H button to go back to the beginning of the
current track. Press it repeatedly to go to the previous tracks.
• Track number will appear briefly on the front display panel.
• If any SKIP button is pressed while the playback is
paused, the playback will be paused again after skipping
to the next track.
3 Press the CLEAR button to erase the incorrect
input.
Repeat
NOTE:
• The REPEAT button is available only during playback.
• The SKIP H and G buttons are not available when
playback is stopped.
REPEAT TITLE / CHAPTER
Title / Chapter Search
DVD
DVD
By using the SEARCH MODE button
1 Press the SEARCH MODE button
for the title/chapter search.
To activate the repeat function, press the REPEAT button
during playback.
•
The repeat mode changes as described below every time
you press the button.
/2
OFF
(repeat off)
2 Enter the desired title/chapter number with the
NOTES:
Numeric buttons.
By using the SKIP buttons H G
During playback, press the SKIP G button to move to the next
chapter. Press it repeatedly to skip to subsequent chapters.
Press the SKIP H button to go back to the beginning of the current chapter. Press it repeatedly to go to the previous chapter.
• Chapter number will appear briefly on the front display
panel.
• If the SKIP H or G button is pressed while the playback
is paused, the playback after skipping to the next chapter
will be also paused.
Downloaded From Disc-Player.com Denon Manuals
CHAPTER
TITLE
(current chapter repeat) (current title repeat)
– 17 –
• Repeat title/chapter is not available with some scenes.
• The repeat setting will be cleared when moving to other
title or chapter.
• Repeat playback does not function during A-B repeat
playback.
EN
English
NOTES:
Track Search
PLAYING A DISC
2 Press the Cursor buttons
REPEAT TRACK
(▲ or ▼) to select a disc, then
press the ENTER button.
CD
• Press the CLEAR button to erase
the most recently entered program.
To activate the repeat function, press the REPEAT button
during playback.
•
OFF
(repeat off)
TRACK
(current track repeat)
5 Disc Repeat
OFF
(repeat off)
TRACK
(current track
repeat)
JPEG
WMA
GROUP
•
[AUDIO]
[AUDIO]
[AUDIO]
[AUDIO]
[AUDIO]
1/ 1
CD [AUDIO]
PROGRAM
CD [AUDIO]
1
1
2
3
4
5
6
7
1/2
•
•
•
•
•
A-B REPEAT
•
DVD
CD
Random Playback
A-
at your chosen starting point.
•
CD
A- appears briefly on the TV
screen.
2 Press the A-B REPEAT button
This shuffles the playing order of tracks instead of playback
in the original sequence.
When playing back tracks in a
single disc randomly
1 In stop mode, press the
A-B
again at your chosen end point.
•
RANDOM button once or
press the MODE button twice.
2 Press the PLAY button to start
random playback.
A-B appears briefly on the TV
screen, and the repeat sequence
begins.
3 To exit the sequence, press the
1/1
1
Press the STOP button once and then the PLAY button
again, playback will restart from the point where the STOP
button was pressed. (Program continued)
Press the STOP button twice and then the PLAY button
again, playback will restart from the track in the usual way.
(Program cleared)
The program setting will be cancelled when the power is
turned off or the disc tray is opened.
Up to 99 tracks can be entered.
If you wish to repeat the current track in the program, press
TRACK appears
the REPEAT button repeatedly until
during playback. If you wish to repeat the entire program
press the REPEAT button repeatedly until
DISC
appears during playback.
If eight or more tracks were set in a program, use the SKIP
H or G button to see all the tracks.
Refer to page 21 for program playback of MP3, WMA, and
JPEG.
The repeat setting will be cleared when moving to other
track or group.
1 Press the A-B REPEAT button
CD
CD
CD
CD
CD
back.
NOTES:
DISC
(entire disc
repeat)
(current folder
repeat)
5 Disc Repeat
•
• Press the CLEAR button to erase
the most recently entered program.
DISC
4 Press the PLAY button to start programmed play-
The repeat setting will be cleared when moving to other track.
Repeat playback does not function during A-B repeat playback.
MP3
(▲ or ▼) to select a track, then
press the ENTER button.
DISC
(entire disc repeat)
NOTES:
•
•
3 Press the Cursor buttons
The repeat mode changes as described below every time
you press the button.
PROGRAM
RANDOM
CD [AUDIO]
RANDOM PROGRAM
--no indication--
When playing back tracks in more than one discs
radomly
1 In stop mode, press the RANDOM button twice or
OFF
A-B REPEAT button.
press the MODE button three times.
2 Press the PLAY button to start random playback.
NOTES:
NOTES:
•
•
•
•
•
The A-B repeat section can only be set within the current
title (for DVDs), or current track (for Audio CDs).
A-B repeat is not available with some scenes in DVD.
To cancel the A point which was set, press the CLEAR button.
A-B repeat playback does not function during title, chapter,
track or all repeat playback.
Program Playback
•
•
CD
•
You may determine the order in which tracks will play.
1 In stop mode press the MODE button.
• The PROGRAM screen will appear.
Downloaded From Disc-Player.com Denon Manuals
– 18 –
If there are discs other than CD in the disc tray, the display will show “----” next to the disc number. If there is no
disc in a tray, this area will be blank.
If you wish to repeat the current track in the random selection, press the REPEAT button repeatedly until
TRACK
appears during playback. If you wish to repeat the entire
random selection, press the REPEAT button repeatedly
until
DISC appears during playback.
You cannot go back to the previous track during random
playback.
Refer to page 20 for random playback of MP3, WMA, and
JPEG.
EN
PLAYING A DISC
MP3
JPEG
WMA
This DVD player can reproduce images and sounds from
data recorded in MP3, JPEG and WMA formats on CD-R
and CD-RW discs.
The DVD player can also run JPEG files stored on Kodak
Picture CD.
The user can enjoy picture images on the television set by
reproducing Picture CDs.
* Picture CD is a service to convert a photograph taken by
conventional film camera into digital data and write the data
on a CD.
For details of Picture CD, contact a shop that deals with
developing service of Kodak Inc.
This player recommends the use of files recorded at the following specifications:
Applicable MP3 file
Sampling
frequency
44.1kHz
48kHz
Type
MPEG1
audio layer 3
Remarks
• It is prohibited to record
MP3 sound on a digital
device when connection is
made digitally.
• MP3 files recorded at fixed
bit rate of 112 kbps or higher are recommended.
Applicable JPEG file
Remarks
Upper limit:
• A JPEG image that extends
Size of
6300x5100 dots beyond the screen is
image
Lower limit:
reduced so that it will be
32x32 dots
displayed within the screen.
Applicable WMA file
Sampling
frequency
Bit rate
Type
Remarks
• Those frequencies are
44.1kHz
applicable to WMA version
48kHz
8 only, not to WMA version
9.
• Ensure that the copyright
48–192kbps
function is set to off when
preparing a WMA disc.
• A prohibition “disable” symbol will appear if the user
WMA version 8 attempts to run a non-reproducible file such as copyright-protected.
•
•
•
•
•
•
•
•
•
•
•
•
An MP3, JPEG or WMA track menu screen appears.
A symbol of “ ” is shown on the top of the group name.
A symbol of “ ” is shown on the top of MP3 files.
A symbol of “ ” is shown on the top of JPEG files.
A symbol of “ ” is shown on the top of WMA files.
If the track extends beyond the scope of screen, a down
arrow “L” appears, indicating that the user can view another part on the next page. If an up arrow “K” appears, it
indicates that the user can view another part on the previous page. The current page number and the number of
total pages are shown on the right of the down arrow “L”.
The system can recognize up to 255 groups (or folders)
and up to 256 tracks. (This applies to the case where
mixed MP3, JPEG and WMA files are recorded.)
If no MP3, JPEG or WMA files are found in the group, the
group is not displayed.
The DVD player can reproduce data recorded as per ISO
9660 Level 1, Level 2 or Joliet on the disc.
It can also run a disc on which data is recorded in a multisession.
For more details of recording systems, see the instruction
manual for the CD-R / CD-RW drive or the writing software.
For MP3 and WMA files recorded in Variable Bit Rate
(VBR), the unit may not display the actual elapsed time.
For discs of JPEG or Kodak Picture CD:
• A JPEG or Kodak Picture CD menu appears.
• If all menu items cannot be displayed in the screen scope,
“G” appears at the right bottom of the screen, indicating
that the user can view remaining items on the next page. If
“H” appears, it indicates that the user can view other
items on the previous page. The track number of the currently highlighted item and the total tracks are shown at
the center bottom of the screen.
• If “G” is shown at the right bottom, use the SKIP G button to view the next page. If “H” is shown at the left bottom, use the SKIP H button to view the previous page.
• It may take some time until all menu items are displayed
on the menu screen.
2 For MP3, JPEG or WMA, press the Cursor buttons
Information on MP3, JPEG and WMA discs
• A file with an extension of “.mp3 (MP3)” is called an “MP3 file”.
• A file with an extension of “.jpg (JPG)” or “.jpeg (JPEG)” is
called a “JPEG file”.
The DVD player can run an image file conforming to the
Exif* specification.
* This is a file format, Exchangeable Image File format
established by Japanese Electronic Industry Development
Association (JEIDA).
• A file with an extension of “.wma (WMA)” is called a
“WMA file”.
• Files whose extension is other than “.mp3 (MP3)”, “.jpg
(JPG)”, “.jpeg (JPEG)” or “.wma (WMA)” will not be listed
on the MP3, JPEG, or WMA menu.
• If the file is not recorded in MP3, JPEG or WMA format, noise
may be produced even if the file extension is either of “.mp3
(MP3)”, “.jpg (JPG)”, “.jpeg (JPEG)” or “.wma (WMA)”.
When a disc with MP3,JPEG or WMA files is inserted in the
DVD player, the track menu will appear on the TV screen,
and number of tracks is displayed on the front panel.
Downloaded From Disc-Player.com Denon Manuals
For discs on which MP3, JPEG or WMA tracks are
recorded:
(K or L), or for Kodak Picture CD, press the
Cursor buttons (s / B / K / L) to select a desired
group or track.
• To return to the previous screen, press the Cursor button
(s).
• If a group (folder) is selected, press the Cursor button (B)
or ENTER button to go on to the track selection screen.
Press the Cursor buttons (K or L) to choose a track, then
press the PLAY or ENTER button.
• If a track is selected, press the PLAY or ENTER button to
start playing back tracks. The selected track and the subsequent tracks will be played back.
• When selecting the folders
–Press the Cursor button (B) when you want to go to the
next hierarchy.
–Press the Cursor button ({) when you want to go back
to the previous hierarchy (except for the top hierarchy).
• If an MP3 or WMA file is selected, reproduction will start
from the selected track and go to the next one in turn.
• If a JPEG or Kodak Picture CD file is selected, an image
will be reproduced from the selected track and go to the
next one in turn.
– 19 –
EN
English
1 Place the disc in the tray with the label facing up.
MP3 / JPEG / WMA Playback
PLAYING A DISC
3 Press the STOP button to stop playback.
2 Press the DISPLAY button again.
• The name of the file currently in
play will be displayed.
Notes on MP3, JPEG and WMA:
• Select “FIRST PLAY” and press the PLAY button, playback
from the top of the disc in the order of tracks and groups.
• The ninth and deeper hierarchies cannot be played.
• The name of group and track can be displayed in up to 25
characters. Alphabets, numerals underline, asterisk or
space may not be displayed. Unrecognizable characters
will be replaced with asterisks.
• Un-reproducible groups or tracks may be displayed
depending on the recording conditions.
• If the TOP MENU button is pressed when a file list is displayed, “FIRST PLAY” will be highlighted.
TRACK 01
<Example: MP3>
3 Press the DISPLAY button for the third time to
show the track number, the elapsed time (MP3 and
WMA), the repeat status, and the playback status
at the top of the screen.
•
Notes on WMA:
• The DVD player can reproduce data recorded as ISO 9660
level 2 with 31 characters file name included punctuation
marks. The name of file can be displayed up to 25 characters.
• Maximum of 8 subfolders can be recognized.
• This unit cannot play back copyright protected WMA files.
will be displayed when the
repeat play has been selected.
T - indicates Track repeat
G - indicates Group (folder) repeat
D - indicates Disc repeat
5 - indicates 5 Disc repeat
TR
1/36 0:01:15
4 Press the DISPLAY button for the forth time to exit.
• During program or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again to exit.
Notes on JPEG and Kodak Picture CD:
• A track is displayed for five seconds and then the next
track is displayed.
• Every press on the Cursor button (B) will turn the image
clockwise by 90 degrees when an image is displayed. A
press on the Cursor button (s) will turn the image counterclockwise by 90 degrees.
• Progressive JPEGs (JPEG files saved in the progressive
format) will not be played back on this DVD player.
• High resolution JPEG files take longer to be displayed.
Track Selection
MP3
JPEG
WMA
1 Press the SEARCH MODE button during playback.
• The FILE LIST will appear.
2 Select a desired track using the Cursor buttons
Notes on Kodak Picture CD:
(L/K/B/s).
• Press the Cursor button (B) when you want to go to
• A press on the STOP button will highlight the previously
displayed track on the menu screen.
Press the STOP button again or press the TOP MENU
button, and the menu screen displays tracks 1 to 6, where
track 1 is highlighted.
the next hierarchy.
• Press the Cursor button (s) when you want to go
back to the previous hierarchy.
3 Press the PLAY button to start playing
NOTES:
Slide Show Mode
JPEG
You can switch to the slide show mode during playback.
1 Press the MODE button during playback.
• The slide show mode screen will appear.
• The slide show mode cannot be switched when it is
stopped, or from the file list screen or the Picture CD
menu screen.
•
•
Press the SEARCH MODE button to exit.
Some selections may require additional time to be recognized.
During playback a desired track can be directly searched.
Just press the track number with the Numeric buttons.
If the pressed track number is not available, the “disable”
symbol appears and the direct search mode is cancelled.
Playback cannot be started from a desired time count.
Pressing the SKIP button G or H will play the next or
previous file.
The SEARCH button is not effective for Picture CD.
•
•
•
•
•
2 Press the ENTER button.
• The slide show mode will change.
1 The entire image appears in one time.
2 The image appears gradually and then disappears.
3 Press the MODE button to exit.
Random Playback
MP3
button while playback is
stopped.
On-Screen Information
MP3
You can check each file during playback.
1 Press the DISPLAY button
JPEG
• The RANDOM screen will
appear.
WMA
WMA
RANDOM
CD [DATA]
RANDOM PROGRAM
--no indication--
2 Press the PLAY button to play the tracks in random
CD[DATA]
order.
once during playback to show
current Disc number.
Downloaded From Disc-Player.com Denon Manuals
JPEG
1 Press the RANDOM or MODE
• You cannot go back to the previous track during random playback.
• For a disc containing mixed MP3, JPEG and WMA
files, random playback of those files will be performed.
– 20 –
EN
PLAYING A DISC
Program Playback
1.ENG Dolby D 5.1ch 48k/3
JPEG
WMA
playback is stopped.
• The PROGRAM screen will
appear.
English
MP3
This function allows you to program a playback order of
MP3, JPEG or WMA in a desired sequence.
1 Press the MODE button while
2.FRE Dolby D 5.1ch 48k/3
PROGRAM
MY COLLECTION
ABC
DEF
GHI
JKL
1/1
ABC
3.JPN Dolby D 5.1ch 48k/3
2 Press the Cursor buttons
(K or L) to select a group,
then press the ENTER button.
• A track selection screen appears.
PROGRAM
ABC
DEF
GHI
JKL
MNO
HELLO
1/2
DEF
Bon jour
3 Press the Cursor buttons
(K or L) to select a track, then
press the ENTER button to
save it in a program.
PROGRAM
NOTES:
ABC
DEF
GHI
JKL
MNO
DEF
• The sound mode cannot be changed during playback
of discs not recorded in double sound.
• Some discs allow to change audio language setting on
the disc menu. (Operation varies between discs. Refer
to the manual accompanying the disc.)
• Pressing the AUDIO button may not work on some
DVDs with multiple audio languages (e.g. DVDs which
allow audio language setting on the disc menu).
• If you choose a language that has a three-letter language code, the code will be displayed every time you
change the Audio Language setting. If you choose any
other languages, ‘---’ will be displayed instead (refer to
page 26).
• Press the CLEAR button to
erase the incorrect input.
• The programmed track is displayed in the right-hand screen.
• If the entire program cannot be displayed at once on
the screen, “L” appears to go to the next page.
• Pressing the Cursor button (s) will show a list of folders that belong to the one-level upper hierarchy than
the currently selected folder.
1/2
1/1
DEF
4 Press the PLAY button to start programmed play-
back.
NOTES:
• Press the RETURN button, and the stop screen will
show up with the program contents in memory.
• Press the STOP button once and then the PLAY button
again, playback will restart from the point where the
STOP button was pressed. (Program continued)
• Press the STOP button twice and then the PLAY button
again, playback will restart from the track in the usual
way. (Program cleared)
• The program setting will be cancelled when the power
is turned off or the disc tray is opened.
• Up to 99 tracks can be set in a program.
• If you wish to repeat the current track in the program,
TRACK
press the REPEAT button repeatedly until
appears during playback. If you wish to repeat the entire
program press the REPEAT button repeatedly until
DISC appears during playback.
• If an inserted disc contains mixed MP3, JPEG and
WMA files, program setting allows 99 tracks for combination of MP3, JPEG and WMA files.
• If eight or more tracks were set in a program, use the
SKIP H or G button to see all the tracks.
Stereo Sound Mode
CD
1 Press the AUDIO button repeatedly during play-
back to select between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
L-CH
- only left channel is active
R-CH
- only right channel is active
STEREO
Both right and left channels
are active (stereo).
L-CH
Only the left channel
is active.
R-CH
Only the right channel
is active.
Audio Language
DVD
The DVD player allows you to select a language (if multiple
languages are available) during DVD disc playback.
1 Press the AUDIO button during playback.
2 Press the AUDIO button repeatedly to select your
NOTES:
•
•
If the Virtual Surround setting is ON, the sound mode will
be fixed to STEREO, and can not be changed.
Stereo sound mode will not be changed when playing DTS CD.
desired language.
Downloaded From Disc-Player.com Denon Manuals
– 21 –
EN
PLAYING A DISC
Subtitle Language
Changing the On-Screen Display
DVD
The DVD player allows you to select a subtitle language (if
multiple languages are available) during DVD playback.
1 Press the SUBTITLE button during playback.
2 Press the SUBTITLE button repeatedly to select
DVD
You can check information about the current disc by pressing
the DISPLAY button on the remote control.
1 Press the DISPLAY button
once during playback to show
current disc number.
your desired subtitle language.
• The selected language will be displayed on the display
bar at the top of the screen.
DVD
2 Press the DISPLAY button
3 To turn off subtitles, press the SUBTITLE button
again during playback.
repeatedly until OFF appears.
• Current chapter number/total
chapters, elapsed time and
remaining time of the current
chapter, and current playback
status will be displayed.
1.ENG/6
Subtitle 1
9/49
0:00:00 -0:00:00
2.FRE/6
Subtitle 2
3 Press the DISPLAY button
again.
• Current title number/total titles,
elapsed time and remaining time
of the current title, and current
playback status will be displayed.
OFF
OFF
1/5
0:00:00 -0:00:00
4 Press the DISPLAY button
again.
NOTES:
•
•
•
•
Some discs allow subtitle language setting on the disc
menu. (Operation varies between discs, so refer to the
manual accompanying the disc.)
Pressing the SUBTITLE button may not work on some
DVDs with multiple subtitle languages (e.g. DVDs which
allow subtitle language setting on the disc menu).
If the desired language is not shown after pressing the
SUBTITLE button several times, the disc does not have
subtitles in that language.
If you choose a language that has a three-letter language
code, the code will be displayed every time you change the
Subtitle Language setting. If you choose any other languages, ‘---’ will be displayed instead. (Refer to page 26.)
• The bit rate (the amount of video data currently being
read) and current playback status will be displayed.
• Current repeat setting appears on the display bar only
when the repeat setting is active.
( C: Chapter repeat/ T: Title repeat/A B: A-B repeat)
• If you are playing a dual layered
disc, the layer number will also
T
IIII
be displayed ( L0: Layer 0 is
played. L1: Layer 1 is played).
5 Press the DISPLAY button
again to remove the display.
Camera Angle
DVD
Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change the
camera angle when the (
) mark appears on the screen.
1 Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2 Press the ANGLE button repeatedly to select your
desired angle.
1/8
Angle 1
2/8
Angle 2
8/8
Angle 8
CD
1 Press the DISPLAY button once during playback to
show current disc number.
2 Press the DISPLAY button again.
• Current track number/total tracks, elapsed time and
remaining time of the current track, and current playback status will be displayed.
• Current repeat setting appears on the display bar only
when the Repeat setting is active.
( T: Track repeat/ D: Disc repeat/ 5: 5Disc repeat/
A B: A-B repeat)
3 Press the DISPLAY button again.
• Current track number/total tracks, elapsed time and
remaining time of the entire disc, and current playback
status will be displayed.
• Current repeat setting appears on the display bar only
when the Repeat setting is active.
( T: Track repeat/ A: All tracks repeat/A B: A-B repeat)
4 Press the DISPLAY button again to remove the
display.
NOTE:
•
If the “ANGLE ICON” setting is “OFF” in the Display menu,
the (
) will not appear.
Downloaded From Disc-Player.com Denon Manuals
– 22 –
• During program or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again to exit.
EN
PLAYING A DISC
Black Level Setting
DVD
Use markers to memorize your favourite places on a disc.
1 Press the SEARCH MODE
1 2 3 4 5 6 7 8 9 10 AC
button four times during playback.
DVD
-- --:--:--
DVD
Adjust the Black Level Settings to make the black parts of
the picture as bright as you prefer.
1 Press the MODE button during playback.
2 Press the ENTER button to
• The display screen and Markers
will appear on the TV screen.
ON
switch ON/OFF.
ON (Default) : Makes the dark
parts brighter.
OFF : Shows the original picture
as recorded.
2 Press the Cursor buttons (s or B) to select 1, 2,
3, 4, 5, 6, 7, 8, 9, or 10 and ensure that
“_ : _ _ : _ _” appears in the display.
3 When reaches the desired point, press the ENTER
button.
3 Press the MODE or RETURN button to exit.
Virtual Surround
• The title or track and elapsed playing time will appear
in the TV screen.
4 To return to the Marker later, press the SEARCH
DVD
MODE button four times during playback and the
Cursor buttons (s or B) to choose the desired
marker, then press the ENTER button.
NOTES:
You can enjoy stereophonic visual space on your existing 2
channel stereo system.
1 Press the MODE button twice
OFF
• Opening the disc tray, turning off the power or selecting
AC at step 2 and pressing the ENTER button will
erase all Markers.
• To clear a marker, using the Cursor buttons (s or B),
position the cursor on to the marker number to be
cleared and press the CLEAR button.
• You can mark up to 10 points.
5 Press the SEARCH MODE or RETURN button to
exit.
during playback.
2 Press the ENTER button to set it 1(Natural effect),
2(Emphasized effect) or OFF.
3 Press the RETURN button to exit.
CD
CD
1 Press the SEARCH MODE button three times dur-
ing playback.
• The display screen and Markers will appear on the TV
screen.
MP3
WMA
1 Press the MODE button during playback.
2 Press the ENTER button to set 1(Natural effect),
2(Emphasized effect) or OFF.
3 Press the RETURN button to exit.
NOTES:
2 Press the Cursor buttons (s or B) to select 1, 2,
3, 4, 5, 6, 7, 8, 9, or 10 and ensure that
“_ : _ _ : _ _” appears in the display.
3 When reaches the desired point, press the ENTER
button.
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• Virtual Surround will not be effective if the sound mode
is set to something other than “STEREO” (for Audio CD
playback only).
• The title or track and elapsed playing time will appear
in the TV screen.
4 To return to the Marker later, press the SEARCH
MODE button three times during playback and the
Cursor buttons (s or B) to choose the desired
marker, then press the ENTER button.
NOTES:
• Opening the disc tray, turning off the power or selecting
AC at step 2 and pressing the ENTER button will
erase all Markers.
• To clear a marker, using Cursor buttons (s or B),
position the cursor on to the marker number to be
cleared and press the CLEAR button.
• You can mark up to 10 points.
5 Press the SEARCH MODE or RETURN button to
exit.
Downloaded From Disc-Player.com Denon Manuals
– 23 –
EN
English
Marker Setup Screen
DVD SETUP
In Setup menu, QUICK mode and CUSTOM mode are availale. QUICK mode consists of the setting menus often needed, and you can make all settings in CUSTOM mode.
You can make the settings of the items with QUICK mark in QUICK mode.
Language Setting
Display Setting
You can change certain aspects of the DVD display screens, on-screen
messages and the display panel on the front of the DVD player.
1 Press the SETUP button in stop mode.
2 Press the Cursor button (B) to select CUSTOM,
Language options are not available with some discs.
1 Press the SETUP button in stop mode.
2 Press the Cursor button (B) to select CUSTOM,
then press the ENTER button.
then press the ENTER button.
• CUSTOM mode will appear.
3 Press the Cursor buttons (s or
B) to select LANGUAGE, then
the ENTER button to confirm.
• CUSTOM mode will appear.
3 Press the Cursor buttons
(s or B) to select DISPLAY,
then the ENTER button to confirm.
LANGUAGE
DIALOG
SUBTITLE
DISC MENU
OSD
ORIGINAL
OFF
ENGLISH
ENGLISH
DISPLAY
TV ASPECT
4:3 LETTER BOX
PANEL DISPLAY
BRIGHT
ANGLE ICON
ON
AUTO POWER OFF ON
4 Press the Cursor buttons (K or L) to select the be-
low items, then press the ENTER button.
DIALOG (Default : ORIGINAL)
4 Press the Cursor buttons (K or L) to select an item,
then press the ENTER button.
• Sets the audio language.
LANGUAGE
DIALOG
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
TV ASPECT (Default : 4:3 LETTER BOX) QUICK
• Press the Cursor buttons (K or L)
L
• Sets the subtitle language.
L
PANEL DISPLAY (Default :
BRIGHT)
• Press the Cursor buttons (K or L)
DISC MENU (Default : ENGLISH)
• Sets the language for DVD Menu.
LANGUAGE
DISC MENU
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
DUTCH
OSD
(Default : ENGLISH)
L
• Press the ENTER button repeatedly to turn Angle mark ON or
OFF.
• Press the ENTER button repeatedly to turn AUTO POWER OFF
ON or OFF.
• It will turn the DVD player to off automatically after 35 minutes of no
use.
• If OTHERS is selected in the DIALOG, SUBTITLE or
DISC MENU screen, press four-digit number to enter
the code for the desired language. (Refer to the language code list on page 26).
• Only the languages supported by the disc can be selected.
6 Press the SETUP button to exit.
NOTE:
DISPLAY
TV ASPECT
PANEL DISPLAY
ANGLE ICON
AUTO POWER OFF
4:3 LETTER BOX
BRIGHT
ON
ON
AUTO POWER OFF (Default : ON)
ting, then press the ENTER button.
DISPLAY
TV ASPECT
PANEL DISPLAY
ANGLE ICON
AUTO POWER OFF
4:3 LETTER BOX
BRIGHT
ON
ON
5 Press the SETUP button to exit.
NOTES:
Language Setting for DIALOG and SUBTITLE is not available with some discs. Then use the AUDIO and SUBTITLE buttons.
Details are on pages 21 and 22.
Downloaded From Disc-Player.com Denon Manuals
PANEL DISPLAY
BRIGHT
DIMMER
AUTO
ANGLE ICON (Default : ON)
LANGUAGE
OSD
ENGLISH
FRANÇAIS
ESPAÑOL
5 Press the Cursor buttons (K or L) to select a set-
•
DISPLAY
for an item selection (BRIGHT,
DIMMER or AUTO) then press the
ENTER button.
• When AUTO is selected, the display dims only during playback.
QUICK
• Sets the language for the OnScreen display.
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
for an item selection, then press the
ENTER button.
• Select 4:3 LETTER BOX for a black bars appears on top
and bottom of the screen.
• Select 4:3 PAN & SCAN for a full height picture with both sides trimmed.
• Select 16:9 WIDE if a wide-screen TV is connected to the
DVD player.
SUBTITLE (Default : OFF)
LANGUAGE
SUBTITLE
OFF
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
DISPLAY
•
•
– 24 –
Be sure to press the SETUP button, or the setting will not work.
You can also choose the item by pressing the numbers.
EN
DVD SETUP
Ratings Control
Choose the appropriate Audio settings for your equipment as it
only affect during the playback of DVD discs of the DVD player.
1 Press the SETUP button in stop mode.
2 Press the Cursor button (B) to select CUSTOM,
Ratings Control limits playback of discs with unsuitable audience
ratings. A four digit code established by the user will unlock the
parental lock.
This feature allows you to prevent your childlen from playing discs
with objectionable scenes.
then press the ENTER button.
RATING LEVEL
• CUSTOM mode will appear.
3 Press the Cursor buttons (s
or B) to select AUDIO, then
the ENTER button to confirm.
AUDIO
DRC
DOLBY DIGITAL
DTS
LPCM SELECT
OFF
ON
ON
OFF
Rating Level allows you to set the rating level of your DVD
discs. Playback will stop if the disc’s ratings exceed the level
you set.
1 Press the SETUP button in stop mode.
2 Press the Cursor button (B) to select CUSTOM,
then press the ENTER button.
4 Press the Cursor buttons (K or L) to select an
3 Press the Cursor buttons (s or B) to select RAT-
item, then press the ENTER button.
DRC (Dynamic Range Control)
(Default : OFF)
4 Press the Numeric buttons to
• To compress the range of sound
volume.
• DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
INGS, then press the ENTER button.
enter your four-digit password.
AUDIO
DRC
DOLBY DIGITAL
DTS
LPCM SELECT
RATINGS
DOLBY DIGITAL (Default : ON)
QUICK
• When doing this for the first time,
enter any four-digit number by
pressing the Numeric buttons
(except for 4737), then press the
ENTER button. That number will
be used as the password from the second time onward.
Record your password in case you forget it.
OFF
ON
ON
OFF
Please enter a 4-digit password.
5 Press the Cursor buttons
(K or L) to select RATING
LEVEL, then press the ENTER
button.
AUDIO
• Set to ON when the player is
connected to Dolby Digital
Decoder.
ON : Output by Dolby Digital
OFF : Convert the Dolby Digital
to PCM
• This function is effective only for the COAXIAL and
OPTICAL connections.
DRC
DOLBY DIGITAL
DTS
LPCM SELECT
OFF
ON
ON
OFF
RATING LEVEL
CHANGE
ALL
6 Press the Cursor buttons
(K or L) button to select the
desired level, then press the
ENTER button.
DTS (Default : ON)
• Set to ON when the unit is connected to DTS Decoder.
ON : Output by DTS sound
OFF: No DTS sound will be output.
• This function is effective only for
the COAXIAL and OPTICAL connections.
RATINGS
RATINGS
RATING LEVEL
ALL
8
7 [NC-17]
6 [R]
5
4 [PG13]
3 [PG]
L
AUDIO
DRC
DOLBY DIGITAL
DTS
LPCM SELECT
OFF
ON
ON
OFF
•
LPCM SELECT (Default : OFF)
• Set to ON when outputting in
48kHz.
AUDIO
DRC
DOLBY DIGITAL
DTS
LPCM SELECT
7 Press the SETUP button to exit.
NOTE:
OFF
ON
ON
OFF
When playing disc with copyright protection
• Even if you select OFF, copyright
protection will be activated and sound will be down
sampled at 48kHz.
This function may not work on some DVDs. Be sure if the RATINGS operates in the way you have set.
To Change the Password:
1) Follow the steps 1 to 4 above.
2) Press the Cursor buttons (K or L) to select CHANGE, then
press the ENTER button.
3) Enter a new four-digit password, then press the ENTER button.
4) Press the SETUP button to exit.
IF YOU FORGET THE PASSWORD
1 Press 4, 7, 3, 7 at step 4 .
• Password will be cleared and rating level will be set to ALL.
2 Repeat steps 4 to 7 to re-establish the parental lock.
5 Press the SETUP button to exit.
CONTROL LEVELS
•
•
•
•
Downloaded From Disc-Player.com Denon Manuals
– 25 –
ALL
Parental lock is cancelled.
Level 8
DVD software of any grade (adult/general/children) can
be played back.
Levels 7 to 2
Only DVD software intended for general use and children can be played back.
Level 1
Only DVD software intended for children can be played
back, with those intended for adult and general use
prohibited.
EN
English
Audio Setting
DVD SETUP
Language
Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
French [FRE]
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
Language
Code
Language
Code
Language
Code
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6561
5165
6567
6569
6568
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language
setting on pages 21 and 22. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)
Downloaded From Disc-Player.com Denon Manuals
– 26 –
EN
MAINTENANCE
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasives.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, adrasive cleaning agents or
antistatic spray intended for analog records.
Cleaning the disc lens
• If the player still does not perform properly while referring to the relevant sections and to “TROUBLESHOOTING
GUIDE” in this Operating Instruction, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized
Service Center for inspection and cleaning of the laser optical pickup unit.
Disc Handling
•
•
•
•
Use discs which have the following logos on them.
Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
Always store the disc in its protective case when it is not used.
Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be
played on the this product. Do not attempt to play such discs, as they may damage the
player.
Downloaded From Disc-Player.com Denon Manuals
– 27 –
EN
English
Cleaning the Cabinet
TROUBLESHOOTING GUIDE
If the DVD player does not perform properly when operated as instructed in this Operating Instruction, check the player, consulting the following checklist.
Problem
Solution
No power
–Check if the AC power cord is properly connected.
–Unplug the AC power cord once, and wait for 5-10seconds and
then plug it in again.
–Check if the TV is switched on.
–Check the video connection.
–Check the VIDEO/AUDIO cable connections to the TV.
–DTS sound cannot be produced with an analog connection.
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the DVD player directly to the TV.
–Connect the DVD player directly to the TV.
–Make sure the disc is compatible with the DVD player.
–Adjust the volume.
–Check that the speakers are connected correctly.
–Check the digital connections.
–Check the audio settings.
–Use a DIGITAL OUT jack when outputting the DTS sound.
–Check the disc for fingerprints/scratches and
clean with a soft cloth wiping from center to edge.
–Clean the disc.
–Clean the disc.
–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays on this player.
–Reset the player by switching the player off, then on again.
No sound or picture
Distorted picture
Completely distorted picture or
black/white picture with DVD
No sound or distorted sound
No audio at digital output
No DTS sound output
Picture freezes momentarily
during playback
Disc can’t be played
No return to start-up screen when
disc is removed
The player does not respond to
the remote control
Buttons do not work or player stops
responding
Player does not respond to some
operating commands during playback
DVD player cannot read
CDs/DVDs
Angle does not switch
Playback does not start when the title is selected
The password for rating level has been forgotten
–Aim the remote control directly at the sensor on the front of the player.
–Reduce the distance to the player.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–To completely reset the player, unplug the AC cord from the AC
outlet for 5-10 seconds.
–Operations may not be permitted by the disc.
Refer to the instructions of the disc.
–Use a commonly available CD/DVD cleaner to clean the lens
before sending the DVD player for repair.
–The angle cannot be switched for DVDs which do not contain
multiple angles. In some cases multiple angles are only recorded
for specific scenes.
–Check the “RATINGS” setting.
–Enter the default password “4737”, then your forgotten password
will be cleared.
NOTES:
•
•
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operating
Instruction for details on correct operations.
Playback from a desired track and random playback are not available during program playback.
Some functions are prohibited on some discs.
Downloaded From Disc-Player.com Denon Manuals
– 28 –
EN
SPECIFICATIONS
APPLICABLE DISCS
(1) DVD-Video discs
1-layer 12cm single-sided discs, 2-layer 12cm single-sided
discs, 2-layer 12cm double-sided discs (1 layer per side)
1-layer 8cm single-sided discs, 2-layer 8cm single-sided
discs, 2-layer 8cm double-sided discs (1 layer per side)
(2) DVD-R/DVD-RW
(3) Compact discs (Audio CD)
12cm discs, 8cm discs
(4) CD-R/CD-RW
S-VIDEO OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
C output level: 0.286Vp-p
Output connectors: S connectors, 1 set
VIDEO OUTPUT
Output level: 1Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
DIGITAL AUDIO OUTPUT
Optical digital output: Optical connector, 1 set
Coaxial digital output: Pin jack, 1 set
English
SIGNAL SYSTEM
NTSC color
POWER SUPPLY
AC 120V, 60Hz
POWER CONSUMPTION
17W (Standby: 0.6W)
MAXIMUM EXTERNAL DIMENSIONS
W: 17-1/8” (435mm)
H: 4-3/32” (104mm)
D: 14-9/16” (370mm)
(including protruding parts)
MASS
9.48lbs (4.6kg)
REMOTE CONTROL UNIT
RC-1040
Infrared pulse type
Supply: DC 3V, 2 R6P/AA batteries
COMPONENT OUTPUT
Y output level: 1Vp-p (75Ω/ohms)
PB/CB output level: 0.7Vp-p (75Ω/ohms)
PR/CR output level: 0.7Vp-p (75Ω/ohms)
Output connector: Pin jacks, 1 set
AUDIO OUTPUT
Output level: 2Vrms
2 channel (L, R) output connector: Pin jack, 1 set
AUDIO OUTPUT PROPERTIES
(1) Frequency response
1 DVDs (linear PCM) : 4Hz to 22kHz (48kHz sampling)
: 4Hz to 44kHz (96kHz sampling)
2 CDs
: 4Hz to 20kHz
(2) S/N ratio
: 115dB
(3) Total harmonic distortion : 1kHz CD: 0.003%
(4) Dynamic range
: DVD: 100dB
CD: 98dB
Downloaded From Disc-Player.com Denon Manuals
– 29 –
EN
MEMO
Downloaded From Disc-Player.com Denon Manuals
MEMO
Downloaded From Disc-Player.com Denon Manuals
TOKYO, JAPAN
www.denon.com
Printed in China
00D 511 4533 002
Downloaded From Disc-Player.com Denon Manuals
Denon Brand Company, D&M Holdings Inc.
1VMN22544
E8625UD *****
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising