Jabra CRUISER2 Datasheet
Jabra CRUISER2 is a Bluetooth wireless in-car speakerphone that enhances hands-free calling and audio streaming experiences while driving. Its key features include:
-
Easy Installation: Simply pair your phone with the speakerphone and attach it to your sun visor using the metal clip.
-
Caller ID and Voice Guidance: The device announces the names of incoming callers and provides voice guidance in 10 different languages.
-
Superior Sound Quality: Noise Blackout™ dual microphones and a powerful speaker ensure clear sound during calls.
-
FM Transmitter: Wirelessly transmit calls and music from your phone to your car stereo using the FM transmitter.
Advertisement
Advertisement
JABRA CRUISER 2
Bluetooth ® Wireless In-car Speakerphone
Works with any Bluetooth ® enabled phone*
DATASHEET
SUPERIOR SOUND FOR
HANDS-FREE CALLS
IN THE CAR
The easier way to talk hands-free while driving
The Jabra CRUISER2 Bluetooth ® in-car speakerphone makes hands-free in-car calls even easier. To start with, its voice gives you simple pairing instructions the first time you turn it on. After that you just put it on your sun-visor and it will connect automatically with your mobile every time. It will download your phonebook.
The Jabra CRUISER2 will then say the names of the contacts in your phonebook when they call. And when you answer, Noise Blackout™ technology and a dual microphone system ensure the conversation always sounds just right.
The Jabra CRUISER2 looks right in any car and its carefully positioned buttons make it exceptionally easy to operate. You won’t run out of charge because its voice will tell you when it needs more power. It is also equipped with an FM Transmitter and A2DP, which allow you to stream your music from your phone to the car stereo. With the Jabra CRUISER2 you stay in control of the conversation without taking your hands off the wheel.
Reasons to choose the Jabra CRUISER 2
• Caller’s name is announced*
• Superior sound with dual mic technology
• Simple setup with no installation needed
* Phone dependent
JABRA ® IS A REGISTERED TRADEMARK OF GN NETCOM A/S
WWW.JABRA.COM/CRUISER2
Quick Start Guide
Charging your in-car speakerphone
Charge your Jabra CRUISER2 until the Battery Status Icon turns green
Turning your in-car speakerphone on and off
Slide the on/off switch into the “I” position
Pairing the in-car speakerphone with your phone
1. When you turn on your Jabra CRUISER2 for the first time, the in-car speakerphone will automatically start up in pairing mode and begin to tell you what to do next
2. Activate Bluetooth on the phone
3. Press ’Yes’ or ‘OK’ on the phone and confirm with PIN code 0000 (4 zeros)
4. Your phone will confirm when the pairing is complete
5. For later pairing: Turn your in-car speakerphone on.
Press and hold the answer/end button until the Connection Status Icon light is flashing blue and the pairing instructions begins
Using your in-car speakerphone
Tap the answer/end button on your speakerphone to answer a call. To end your call, just tap the answer/end button again.
Install it in your car
After you have successfully paired you phone (or phones) to your Jabra CRUISER2 you use the metal clip on the back of the in-car speakerphone to attach it to your sun visor. That’s all the installation needed. You are now ready to drive responsibly.
C
A H I J
K
D
B
E
F
G
L
A Answer/end button
Tap to answer/end call
B Volume up
Tap to turn volume up one step
C Mute button
Tap to mute or un-mute during a call
D Volume down
Tap to turn volume down one step
E FM Button
Press FM button to transfer calls or music to your car radio. Press the button and set your radio to the announced frequency. To change frequency press volume up while in FM mode
F On/off switch
Slide the switch to the “I” position to turn on and the “0” to turn off
G Charging port
Easy charging with the supplied
USB charging cable. Either with the cigarette lighter adapter or with your PC
H FM status icon
Solid red light when in FM mode
I Connection status icon
Solid blue when connected.
Flashes rapidly in pairing mode
J Call status icon
Solid blue during a call. Flashes every one second when there is an incoming call
K Battery status icon
Flashes red when battery is low.
Solid red when charging and solid green when fully charged
L Visor clip
Features and Specifications
1. Acoustically optimized design with Noise Blackout™ dual microphones and a powerful speaker
2. Easy to install. Pair to your phone and place on your sun visor. Then you are ready to drive responsibly
3. Connect it to your car radio with the FM transmitter and transmit your music and calls to your car speakers
4. Play music from your Bluetooth device using A2DP
5. Advanced MultiUse™ allows you to have two active connections at the same time and switch between them whenever you please.
6. It downloads your phonebook and tells you who is calling
7. Dedicated mute button and large easy to access volume controls
8. L 66 x W 124 x H 19 mm
9. Bluetooth technology - clear sound with Bluetooth 2.1 + EDR
& eSCO
10. Auto-pairing accompanied by audible pairing instructions for no-nonsense set-up
11. Voice Guidance in 10 different languages (UK, US, SP, FR,
GER, RUS, BR (POR), MANDARIN, ITA, PL)**
12. Jabra Discreet Light feature – the light indicator (LED) does not continually flash and you can turn it completely off in night drive mode
13. Features answer/end, redial and voice dial*
14. In-car cigarette lighter adapter charger with disconnectable
USB cable so you can also charge it from your PC
15. Up to 14 hours talk time and up to 20 days of standby time
* Phone dependent
** The in-car speakerphone ships with four pre-installed languages.
More can be downloaded from Jabra.
JABRA ® IS A REGISTERED TRADEMARK OF GN NETCOM A/S
WWW.JABRA.COM/CRUISER2

Public link updated
The public link to your chat has been updated.
Advertisement