VDO | SENSORS - FOR ENGINE MANAGEMENT V3.0 | MoTeC Europe Price List

MoTeC Europe Price List
RETAIL Price List - January 2012
Engine Management, Data Acquisition,
Power Distribution & Accessories
www.motec.com
PAGE 1
MoTeC Europe Ltd.
RETAIL
JANUARY 2012
CONTACT
MoTeC (Europe) Ltd
Unit 14, Twyford Mill Ind. Est.
Oxford Road
Adderbury
Oxon
OX17 3SX
PHONE
FAX
WEB
EMAIL
+44 (0) 8700 119100
+44 (0) 8700 111922
www.motec.com
sales@moteceurope.co.uk
TERMS & CONDITIONS
• All prices quoted are in Pounds Sterling and are exclusive of VAT
• Freight charges are additional or by prior arrangement
• All MoTeC products are guaranteed for 2 years. Third-party products carry the warranty of the original manufacturer
• Contact MoTeC for details of your nearest authorised dealer
• Telephone orders MUST be confirmed by fax, post, or email
• Product and company names are trademarks or trade names of their respective companies
• Goods returned for credit must be received within 7 days from date of invoice in as new condition and include all supplied accessories. A 10% re-stocking fee will be applied to all returns received after this period.
• P.O.A. = Price On Application; T.B.C. = To Be Confirmed; F.O.C. = Free Of Charge
www.motec.com
PAGE 2
Retail Price List Contents
Section
RETAIL
JANUARY 2012
Page No.
CDL3
4
Power Distribution
5
i2 Activation Codes
6
Data Acquisition & Display
7-9
Beacon
9
GPS
10
Engine Management Systems
11 - 14
Plug-In Systems (OEM)
15
PWC Plug-In ECU Kits
16
ECU Accessories
17
Lambda Measurement
18
Ignition System Components
19
Communications Cables
20
Sensors
21-24
Wiring & Connectors
25-29
Accessories
30
‘Race smart.’ Clothing
31
Training & Support Services
31
Repairs, Testing & Upgrades
31
www.motec.com
PAGE 3
CDL3 & Accessories
RETAIL
JANUARY 2012
The CDL3 is built with the same technology and quality as our top of the range Dash Loggers to
give entry level racers the professional edge. It is a configurable unit that can be expanded with I/
O options, and can be purchased standalone or as part of
our new CDL3 Track Kits.
• 8Mb logging memory for data analysis with i2
• Light weight, programmable with adjustable backlight
• Capable of display, logging and controlling all in one
• User defined screen layouts, messages and warnings
• 3 pages (for Warm Up, Practice and Race)
• 1 x CAN with programmable bus speed
• 1 x RS232 (for GPS input)
• 1 x additional selectable RS232 or CAN port
CDL3 & Upgrades
Part No.
Price
CDL3 Club Dash Logger Backlit (Non Logging)
18022
1299.00
CDL3 Logging Enable (enables 8MB logging memory)
29518
433.00
Part No.
Price
CDL3 12 I/O Upgrade
CDL3 Track Display and Track Logging Kits
29500
299.00
The CDL3 Track Display Kit
is a cost-effective, plug-in
display solution that offers
professional level features
without the need for a custom installation. The kit is
quick and easy to connect,
requiring no previous experience with MoTeC systems. Each component simply plugs into the professionally wired and terminated loom, which is labelled to identify the corresponding connector.
Track Display Kit Includes: CDL3 with 8MB logging, SLM-C Club Shift Light Module, 10hz GPS
(Low Cost), Two buttons, pre-wired, Professional quality plug-in loom, terminated and labelled,
with plug-in power adaptor & Ethernet Cable (as per picture above).
Track Logging Kit Includes : All the above plus the 8Mb Logging Enable Upgrade.
CDL3 Track Display Kit
18023
1599.00
Part No.
Price
CDL3 Accessory Kit (includes SLM-C, GPS, CDL3 terminated
loom, two button loom and RJ45 Ethernet Cable)
61124
349.00
CDL3 to I/O Loom
61196
220.00
CDL3 to OBD-II
61197
76.00
CDL3 to CAN ECU
61198
65.00
CDL3 Two Button Loom
61221
86.00
CDL3 Track Logging Kit
Spares & Accessories
CDL3 to RS232 ECU
CDL3 Curly Cord
CDL3 Loom, Terminated
SLM-C Club SLM
18024
61199
1995.00
61.00
61222
134.00
18122
225.00
62203
213.00
www.motec.com
PAGE 4
Power Distribution
RETAIL
JANUARY 2012
MoTeC Power Distribution Modules (PDM) are designed to replace conventional relays,
fuses and circuit breakers, simplifying wiring and reducing weight while increasing reliability. They not only provide electronically switched power to various systems in the vehicle, but can also provide full diagnostic information, including output currents and error
status, enabling teams to monitor the entire vehicle via telemetry. New for 2009 are the
PDM15 and PDM30 low cost variants.
Power Distribution Modules
Part No.
Price
PDM16 Power Distribution Module
14102
1684.00
PDM15 Power Distribution Module
14104
1045.00
PDM32 Power Distribution Module
PDM30 Power Distribution Module
PDM Connectors
14100
14103
2666.00
1874.00
Part No.
Price
95560
39.00
PDM16/32 8-way Connector (AS616-08SN)
68088
96.00
PDM32 37-way Connector (AS614-35SN)
68100
78.00
PDM15/30 Input/Output
PDM15/30 Connector Kit
PDM16/32 Input/Output
PDM16/32 26-way Connector (AS616-26SN)
68086
86.00
PDM16/32 Battery+ Connector (ASHD614-1SN-C25)
We can supply the PDM Battery+ connector pre-crimped onto a 1m length of 25mm battery cable
with either a straight boot, or two options of 90° boot depending on required cable orientation
PDM Batt+ Connector, 1m cable, straight boot
PDM Batt+ Connector, 1m cable, 90° boot “Left” orientation
PDM Batt+ Connector, 1m cable, 90° boot “Right” orientation
PDM15/30 Battery Cable
PDM15/30 1m Battery Cable with pre-crimped terminal
68062
163.00
68064
163.00
68063
79143
163.00
28.00
www.motec.com
PAGE 5
I2 PRO Feature Licences
RETAIL
JANUARY 2012
MoTeC’s i2 Pro Data Analysis
software now includes new Feature Licences that can be purchased to activate a particular feature on one physical computer for
a nominated length of time. The
first features released include Licences to analyse non-i2 Pro log files using i2 Pro and a Licence to manipulate log files
via an API (Application Programming Interface).
LICENCE TO OPEN MoTeC STANDARD LOG FILES
• Allows individual PCs to open any MoTeC log file in i2 Pro
• Log files can be analysed using all i2 Pro features but will be saved in their original format
• Particularly useful for those that use i2 Pro software on
one computer to analyse Standard and/or Pro log files
from many MoTeC logging devices
LICENCE TO IMPORT PI ASCII DATASET
• Allows individual PCs to convert exported Pi ASCII files
into i2 Pro files, via the i2 Pro File Conversion Wizard
• Ideal for MoTeC users who previously had a Pi logging
system and would like to analyse this data in i2 Pro
alongside their current data, or for existing Pi users to
take advantage of i2 Pro's extensive analysis features
i2 API LICENCE
• Provides access to and manipulation of MoTeC log files from tools such as MS Excel, MATLAB, Visual Basic and Visual C# for custom processing or external analysis
of data generated in i2 Pro
• Enables the i2 Application Programming Interface that can be used from any language that
supports COM technology
• The functionality of the i2 API software object includes:
- Loading any MoTeC log file (.ld file)
- Reading MoTeC log file data including channels, ranges, laps, beacons and details
- Creating new i2 Pro log files and channels from code
i2 Activation Codes & Licences
Part No.
Price
Open i2 Standard Files ( 1 Year )
22011
22021
510.00
2510.00
Import Pi ASCII Files ( 30 days )
22030
145.00
Import Pi ASCII Files ( 1 Year )
22031
1075.00
i2 API Licence ( 1 Year )
www.motec.com
PAGE 6
Data Acquisition & Display
SDL3 Sport Dash Logger
RETAIL
JANUARY 2012
Part No.
Price
The Sport Dash Logger (SDL3) is an upgraded replacement for
the SDL2. New features include:
• Logging memory up to 120 MB
• Fast Ethernet download
• Greater processing power
• Logging of up to 500 samples per second
• Input expansion via E888 Expanders
• 2 more speed inputs than SDL
• Two separate CAN buses
• Internal 3-axis G sensor
Mating connector not included
SDL3 Advanced Dash Logger
The SDL3 comes standard as a combined display and powerful control device in one lightweight
unit. With the addition of the Data Logging upgrade it can become a fully programmable data
logger with a 16 or 120 MB memory. The optional backlit version has an inbuilt voltage inverter
to power the LCD backlight. The ESDL3 Enclosed Dash Logger is supplied to the same base
specification as the SDL3 providing 16 or 120 MB logging and control where a display is not required.
SDL3 Advanced Dash Logger
18017
1655.00
ESDL3 Enclosed Dash Logger (includes 16MB logging enable)
18019
2540.00
Logging Enable (enables 16 MB logging memory)
29414
985.00
120 MB Logging Memory (upgrade from 16 MB to 120 MB)
29415
402.00
Logging Enable (enables 8MB logging memory)
29214
782.00
Pro Logging Advanced Analysis
29220
505.00
16MByte Logging Memory (upgrade from 8MB to 16MB)
29115
200.00
Extension to 50 Input/Outputs
29101
585.00
Pro Logging Advanced Analysis
29120
655.00
Telemetry Support
29121
655.00
Remote Logging (requires telemetry upgrade)
29122
725.00
Lambda Measurement Support
29102
275.00
Backlit SDL3 Advanced Dash Logger
37 Pin Autosport SDL3 Connector (AS614-35SN)
18018
68100
1875.00
78.00
SDL3 Upgrades
Pro Logging Advanced Analysis
29420
715.00
SDL Upgrades
ADL2 Upgrades
www.motec.com
PAGE 7
RETAIL
Data Acquisition & Display
JANUARY 2012
ADL3 Advanced Dash Logger
The Advanced Dash Logger (ADL3) is a powerful replacement
for the ADL2. New features include:
• Logging memory up to 250MB
• Fast Ethernet download
• Logging of up to 1000 samples per second
• Input expansion via E8xx Expanders or VIMs
• 2 more AV inputs than ADL2
• Two separate CAN buses
• Internal 3-axis G sensor
•
ADL3 Advanced Dash Logger
Part No.
Price
Mating connector not included
The ADL3 is supplied as a standard dash logger with 16MB logging memory. The optional backlit
version has an inbuilt voltage inverter to power the LCD backlight. The EDL3 Enclosed Dash Logger is supplied to the same base specification as the ADL3 providing 16MB logging and control
where an integral display is not required
ADL3 Advanced Dash Logger
18014
3950.00
EDL3 Enclosed Dash Logger
18016
3881.00
250MByte Logging Memory (upgrade from 16MB to 250MB)
29315
525.00
Pro Logging Advanced Analysis
29320
735.00
Backlit ADL3 Advanced Dash Logger
79 Pin Autosport ADL3 Connector (AS620-35SN)
ADL3 Upgrades
Extension to 52 Input/Outputs
Telemetry Support
Remote Logging (requires telemetry upgrade)
Central Logging System
18015
68080
29301
4321.00
105.00
635.00
29321
655.00
Part No.
Price
29322
725.00
The MoTeC Central Logging System has been developed as the ultimate acquisition tool for those
that place high demands on their data system. This system consists of an ACL (Advanced Central
Logger) plus multiple VIMs (Versatile Input Modules). Mating Connectors not included
ACL Advanced Central Logger
ACL Advanced Central Logger (inc. 1GB card, pro analysis,
and Ethernet comms lead)
22 Pin Autosport ACL Connector (AS612-35SN)
ACL Upgrades
Telemetry Support
Remote Logging (requires telemetry upgrade)
SVIM Versatile Input Module
SVIM Versatile Input Module
5 Pin Autosport VIM CAN/Power Connector (ASL606-05SN)
55 Pin Autosport VIM Sensor Connector (AS616-35SN)
18105
4200.00
68087
65.00
25021
706.00
25022
783.00
18111
1835.00
68098
68090
29.00
81.00
www.motec.com
PAGE 8
Data Acquisition & Display
MDD Mini Digital Display
RETAIL
JANUARY 2012
Part No.
Price
The MDD is a remote LCD Display for use as a satellite display for all ECUs or loggers. The unit is
also available as an uncased OEM unit to allow integration into your own design of steering wheel.
The MDD Input Kit is available as an add-on to the standard MDD and includes an extra loom to
allow buttons and switches to be wired directly to the MDD for transmission via the CAN bus.
MDD Mini Digital Display
18011
855.00
MDD Input Kit (loom and new backplate. MDD not included)
61115
150.00
MDD OEM (uncased MDD for steering wheel integration)
18012
795.00
MDD Steering Wheel
The MDD is also available integrated into a steering wheel assembly, complete with buttons and
shift lights. The wheel has been used in a variety of single seater and sportscar applications, including numerous Le Mans cars and an IndyCar. The wheel is also available with an integrated
SLM Shift Light Module. Please contact us to discuss your requirements. (Please Note: Units are
made to order)
MDD Steering Wheel
Lap Timing
MoTeC BTX Beacon Transmitter
MoTeC BR2 Beacon Receiver
79400
from
2995.00
Part No.
Price
15500
370.00
15512
350.00
68098
29.00
Beacon Accessories
5 Pin Autosport BR2 Connector (ASL606-05SN)
BR2 Configuration Loom (for programming advanced features)
Replacement BTX Power Lead
Expansion Modules
61048
120.00
Part No.
Price
61033
40.00
These CAN-based Expansion modules provide extra inputs and outputs when connected to a logger or ECU. The E888 features 8 AV inputs and 8 thermocouple inputs with inbuilt amplifiers,
whereas the E816 has 16 AV inputs. Both feature extra digital inputs, and 8 outputs.
E888 Expander Module (supplied with plastic connectors)
E816 Expander Module (connector not supplied)
66 Pin Autosport E816 Connector (AS618-35SN)
Accessories
14007
767.00
68089
101.00
Part No.
Price
14008
842.00
STC Serial to CAN Converter
Provides conversion of serial data to CAN format, allowing serial devices to be connected to an
SDL/ADL2/ADL3/ACL via the CAN bus. Baud Rate settings should be confirmed at time of order
STC Serial to CAN Converter
61125
175.00
www.motec.com
PAGE 9
GPS
GPS Units
RETAIL
JANUARY 2012
Part No.
Price
GPS Units allow vehicle position, speed, and heading data to be sent to a MoTeC logging device,
which can then be used for the drawing of track maps and analysis of driving lines in the i2 analysis software. GPS units can also be used for Lap Timing instead of an infrared beacon, when used
in conjunction with an CDL3, SDL, SDL3, ADL2, ADL3, or ACL.
5Hz / 10Hz GPS
The GPS-L5 and L10 are 5 & 10 Hz GPS units which combines the
electronics and antenna into one small unit. A highly sensitive receiver allows the GPS to lock onto signals even in difficult environments. Units come pre terminated with a DTM connector.
The L5 is pre-configured to be compatible with MoTeC 'Hundred Series' and M84 ECUs.
The L10 is pre-configured to be compatible with MoTeC Dash/Data
Loggers. It is not compatible with MoTeC ECUs
GPS-L5 5Hz GPS (ECU)
GPS-L10 10Hz GPS (Data)
5Hz GPS GARMIN
5Hz GPS-G1 GPS Unit
Professional 10Hz / 20Hz GPS
79325
195.00
41300
320.00
41303
640.00
79324
195.00
The Professional GPS unit consists of a base unit
in a professional aluminium case with Autosport
connector, and a separate antenna. The units are
available with update rates of 10Hz or 20Hz, and
can be specified to transmit GPS data either via
RS232 or via CAN through an external MoTeC
STC part no 61125. Baud rate should be confirmed at time of ordering. Mating connector
not included
Pro 10Hz GPS (RS232 comms only)
Pro 20Hz GPS (RS232 comms only)
STC Serial to CAN Converter
Accessories
13 Pin Autosport Professional GPS Connector (AS610-35SA)
Spare GPS Antenna for Professional Unit
41304
998.00
68010
59.00
61125
41305
175.00
72.00
www.motec.com
PAGE 10
Engine Management Systems
M4 ECU
RETAIL
JANUARY 2012
Part No.
Price
The M4 features four injector drivers, and the M4 Pro has the Advanced Tuning and Data Logging
option as standard. Includes mating connector
MoTeC M4-3DFIS ECU (3D Fuel/Ignition/Sequential)
10002
749.00
10003
999.00
M4 Advanced & Logging Upgrade
26004
250.00
M4 Lambda Upgrade (requires advanced & logging upgrade)
26006
200.00
M4 Remote Logging Upgrade (requires telemetry upgrade)
26009
475.00
Part No.
Price
MoTeC M4-PRO 3DFISA ECU (Advanced & Logging)
M4 ECU Upgrades
M4 Logging Only Upgrade (512kB)
M4 Telemetry Upgrade
M48 ECU
26005
26008
170.00
475.00
The M48 features eight injector drivers, and the M48 Pro has the Advanced Tuning and Data Logging option as standard. Includes mating connector
MoTeC M48-3DFIS ECU (3D Fuel/Ignition/Sequential)
11002
1100.00
MoTeC M48-PRO 3DFISA ECU (Advanced & Logging)
11003
1363.00
M48 Advanced & Logging Upgrade
27004
263.00
M48 Lambda Upgrade (requires advanced & logging upgrade)
27006
210.00
M48 Remote Logging Upgrade (requires telemetry upgrade)
27009
499.00
Part No.
Price
M48 ECU Upgrades
M48 Logging Only Upgrade (512kB)
M48 Telemetry Upgrade
MLS & M2R ECUs
27005
27008
178.00
499.00
The MLS and M2R ECUs are derived from the M4 ECU, and are customised for more specific applications. Includes mating connector
MLS ECU (for Chevrolet LS1 and Lexus 1UZFE V8 Engines)
M2R ECU (dedicated to 2 rotor engines)
MLS ECU Upgrades
MLS Advanced & Logging
MLS Logging Only Upgrade (512kB)
MLS Lambda Upgrade (requires advanced & logging upgrade)
M2R ECU Upgrades
M2R Advanced & Logging
M2R Logging Only Upgrade (512kB)
M2R Lambda Upgrade (requires advanced & logging upgrade)
10005
840.00
26014
278.00
26016
210.00
10006
26015
840.00
178.00
26024
278.00
26026
210.00
26025
178.00
www.motec.com
PAGE 11
Engine Management Systems
M84 ECU
RETAIL
JANUARY 2012
Part No.
Price
The NEW versatile MoTeC M84 ECU delivers a unique package of professional level features at
an entry-level price. The M84 is suitable for a broad range of high performance engine applications, including engines with up to 8 cylinders. It also suits rotary engines with twin, triple or
quad rotors.
Based on the same advanced technology pedigree as MoTeC’s world–renowned benchmark
M800 ECU. The M84 ECU shares the same sophisticated processor and Windows software platform but with a package of features to suit more moderate system requirements.
The entry-level price includes permanently enabled on-board Wideband Lambda Plus
512kB of data logging memory as standard.
M84 Features
•
•
•
•
•
•
•
•
•
•
Shares the same advanced technology pedigree as the M800/M880 ECU
Programmable, sequential control of engines up to 8 cylinders and quad rotaries
Individual dual cylinder tuning of both fuel delivery and ignition timing
Suits modern engines, including those with coil per cylinder ignition
Accommodates almost all OEM sensors and factory trigger modes
Integrated advanced diagnostics, including injector and crank trigger modes
8 Auxiliary outputs for user-defined functions such as boost control and spray bars
Dedicated, Windows based ECU Manager software with sophisticated diagnosis and user
definable screen layouts
World class data analysis using MoTeC’s i2 software
Easy CAN connectivity to other MoTeC devices such as Dash & Shift Light Modules
M84 ECU
Part No.
Price
13084
1475.00
M84 ECU Upgrades
Part No.
Price
M84 ECU
Advanced Functions (includes Hi-Lo, Traction, ORB, Gear cut)
27104
290.00
Hi-Lo Injection (secondary Injection)
27101
175.00
Dual Lambda
27103
165.00
Over Run Boost (anti-lag)
27117
179.00
Traction Control & Launch Control (2 ,3 or 4 wheel)
Gear Change Ignition Cut (flat shifts)
www.motec.com
27102
27118
185.00
179.00
PAGE 12
Engine Management Systems
M400 ECU
RETAIL
JANUARY 2012
Part No.
Price
13040
1717.00
24105
295.00
M400 Logging Only Upgrade (512kB)
24101
121.00
M400 Drive by Wire (contact us for supported applications)
24112
262.00
The M400 offers four injector drivers and four ignition outputs, and is a fully programmable management system
ideal for engines up to four cylinders with sequential injection and multi-coil ignition. It is also well suited to twin rotary applications. Eight auxiliary outputs provide control
for aftermarket devices and systems providing functions
such as 3D boost control, nitrous injection, intercooler
spray bars, idle speed, shift lights, warning alarms and
many more. Includes mating connectors
M400 ECU
M400 ECU Upgrades
M400 Advanced Functions Upgrade (allows anti-lag, traction
and launch control, full throttle upshift, pit speed limiting, etc)
M400 Lambda Upgrade
24102
394.00
M400 Camshaft Control (contact us for supported applications)
24116
236.00
M400 Pro Analysis
24104
557.00
M400 Over Run Boost
M600 ECU
24117
179.00
Part No.
Price
13060
1885.00
M600 Advanced Functions Upgrade (allows anti-lag, traction
and launch control, full throttle upshift, pit speed limiting, etc)
26105
295.00
M600 Logging Only Upgrade (512kB)
26101
M600 Lambda Upgrade
M600 Dual Lambda Upgrade (requires single lambda upgrade)
26102
121.00
26103
189.00
The M600 offers six injector drivers and six ignition outputs, and is a fully programmable management system
ideal for engines up to six cylinders with sequential injection and multi-coil ignition. It is also well suited to triple
rotary applications. Eight auxiliary outputs provide control
for aftermarket devices and systems providing functions
such as 3D boost control, nitrous injection, intercooler
spray bars, idle speed, shift lights, warning alarms and
many more. Includes mating connectors
M600 ECU
M600 ECU Upgrades
M600 Drive by Wire (contact us for supported applications)
26112
394.00
262.00
M600 Camshaft Control (contact us for supported applications)
26116
236.00
M600 Pro Analysis
26104
557.00
M600 Over Run Boost
26117
179.00
www.motec.com
PAGE 13
Engine Management Systems
M800 & M880 ECUs
RETAIL
JANUARY 2012
Part No.
Price
The M800 offers eight injector drivers (with
twelve as an option) and six ignition outputs, and
is a fully programmable management system
ideal for engines up to twelve cylinders with sequential injection and multi-coil ignition. Includes
mating connectors
The M880 has the same facilities as the
M800 but includes the Advanced Functions
Upgrade, Single Lambda, 1MB Logging
Memory, Autosport Connector & option to
expand to 4MB logging memory. Mating
connector not included
M800 ECU Standard Tuning
13001
2095.00
66 Pin Autosport M880 Connector (AS618-35SN)
68089
101.00
M880 Professional
M800 & M880 ECU Upgrades
13002
3472.00
Part No.
Price
M800 Advanced Functions Upgrade (allows anti-lag, traction
and launch control, full throttle upshift, pit speed limiting, etc)
28105
295.00
4Mb Logging Memory (M880 only)
28101
28108
179.00
Single Lambda Support
28102
394.00
28107
520.00
1Mb Logging Memory (M800 only)
Pro Logging Advanced Analysis
Dual Lambda Support (requires single lambda upgrade)
Telemetry Support
28104
28103
Remote Logging Upgrade (requires telemetry upgrade)
28109
Drive by Wire (contact us for supported applications)
28112
Servo Motor & Stepper Motor Drive
28113
M800 Over Run Boost
28117
10/12 Cylinder Sequential Support
Multi-Pulse Injection and Multi-Spark Ignition
Camshaft Control (contact us for supported applications)
28111
404.00
557.00
189.00
520.00
289.00
262.00
28115
168.00
28116
236.00
168.00
179.00
www.motec.com
PAGE 14
RETAIL
OEM Plug-In ECU Systems
The M800 OEM is designed as a Plug-In ECU for Mitsubishi and Subaru applications and is based on the M800 ECU. The Plug-In ECU is designed to
use the vehicle's existing wiring, with no need to remove or add sensors.
Customised with OEM connectors, these replacement boards eliminate the
need for adaptor looms, and fit straight into the factory ECU box. The M800
OEM has all the facilities of the M800 except it can only drive low current
type Fuel Injectors.
JANUARY 2012
The Diff Controllers offers direct replacements for Mitsubishi and Subaru driver-controlled centre
differentials, allowing a number of user-defined configurations to determine the operating characteristics of the centre differential. Now included the MDC2 Diff Controller for the Mitsubishi EVO X
RS & GSR.
Included ECU codes and Lower Prices
MoTeC now includes selected Upgrade Codes Free of Charge for each OEM type, within the
current ECU price.
Additionally we have lowered the total price of the Mitsubishi EVO X and the Subaru 9/10
ECUs. The part numbers will remain the same and the parts listing below explains which
codes are now included with each OEM ECU type and the end total price.
Mitsubishi
Part No.
Price
M800 OEM Plug-In ECUs
NOTE: EVO 9 versions require the addition of part 28116 cam control upgrade
Lower Price!
Mitsubishi EVO 4-8 (4 plug) Adv. Functions & 1Mb logging incl
13009A
1650.00
Mitsubishi EVO 8/9 (3 plug, EVO 8 MR/GSR & EVO 9)
Adv. Functions & 1Mb logging included
13010A
1650.00
28116
Mitsubishi EVO X RS-GSR Cam , DBW and Adv. Functions incl.
13014A
236.00
1995.00
14012
898.00
Part No.
Price
Mitsubishi EVO 9 cam control upgrade
NOTE: It is essential to specify at time of ordering if you require an RS or GSR version
Diff Controllers
MDC Mitsubishi Diff Controller (EVO 7,8 and 9)
MDC2 Mitsubishi Diff Controller (EVO X RS-GSR)
Subaru
14016
898.00
M800 OEM Plug-In ECUs
NOTE: Subaru STi versions require the addition of part 28116 cam control upgrade
Lower Price!
Subaru Version 5-6 Adv. Functions & 1Mb logging included
13004A
1650.00
Subaru Version 7/8 (WRX, UK/Jap/USA versions)
Adv. Functions & 1Mb logging included
13008A
1650.00
13012A
Subaru STi Cam Control Upgrade
28116
1995.00
MoTeC SDC1 Subaru Diff Controller (WRX STi 2003)
14009
898.00
MoTeC SDC3 Subaru Diff Controller (2008 models)
14015
898.00
Subaru Version 9/10 Cam , DBW and Adv. Functions included
Diff Controllers
MoTeC SDC2 Subaru Diff Controller (2004/5/6 models)
14010
236.00
898.00
www.motec.com
PAGE 15
RETAIL
PWC Plug-In ECU Kits
YAMAHA
JANUARY 2012
MoTeC PWC Plug-In ECU kits are fully programmable, direct replacements for factory ECUs on a select number of popular PWC models, based around
the M400M Marine ECU. The system can be purchased as a kit complete with an adaptor wiring
loom, mounting brackets and DBW upgrade where
required. PWC Plug-In kits are convenient and cost
effective to install because they eliminate the need
to rewire the PWC. They simply plug into the factory
wiring harness using the original sensors and fuel
system. Alternatively the parts can be bought individually.
PWC Models
KAWASAKI
Part No.
Price
M400 PWC Kit for YAMAHA FX-SHO, FZS/FZR
13041
1995.00
M400 PWC Kit for SEA-DOO RXP, RXP-X, RXT
13043
1995.00
M400 PWC Kit for SEA-DOO 2010 RXT-X-260, 260iS
13045
2257.00
13042
M400 PWC Kit for KAWASAKI ULTRA 250X, 260X
13044
M400 PWC Kit for HYDROSPACE S4
SEA-DOO
HYDROSPACE
Accessories
1995.00
1995.00
Wiring Adaptor Kit for Yamaha FX-SHO, FZS/FZR
61143
560.00
Wiring Adaptor Kit for Kawasaki Ultra 250X, 260X
61151
923.00
Wiring Adaptor Kit for SEA-DOO RXP, RXP-X, RXT
61157
960.00
61160
745.00
Wiring Adaptor Kit for SEA-DOO 2010 RXT-X-260, 260iS
61170
Wiring Loom only for Yamaha FX-SHO, FZS/FZR
61142
980.00
Wiring Loom only for Kawasaki Ultra 250X, 260X
61144
370.00
Wiring Loom only for SEA-DOO RXP, RXP-X, RXT
61155
450.00
Wiring Loom only for SEA-DOO 2010 RXT-X-260, 260iS
61171
535.00
Wiring Adaptor Kit for HYDROSPACE S4
61166
Wiring Loom only for HYDROSPACE S4
Marine M400 ECU
Yamaha Injector Connector Kit Uscar
1680.00
34017
11.00
34018
Yamaha Adaptor Top 11mm for YP Injector
Hayabusa Kit
450.00
13040M
34016
Yamaha Injector YP 725cc
400.00
Part No.
135.00
16.00
Price
MoTeC offer a choice of two working Plug-and-Play ECU and wiring kits as direct replacements
for the factory ECU on Suzuki Hayabusa models Gen I and Gen II, based around the M84 and
M800 ECUs.
The PNP kit includes the adapter box, wiring harness, lambda sensor, Bosch ignition amplifier,
custom ECU mount with hardware and either a MoTeC M84 or M800 ECU depending on type.
Hayabusa PNP Kit - M84 ECU version
Hayabusa PNP Kit - M800 ECU version
Wiring loom Adaptor Kit Only - (without ECU)
13084-Hayabusa
2100.00
79170
695.00
13001-Hayabusa
2720.00
www.motec.com
PAGE 16
ECU Accessories
ECU Accessories
RETAIL
JANUARY 2012
Part No.
Price
Ignition Expander
14001
268.00
AS Connector Ignition Expander (needs connector 68087)
14006
373.00
Traction Control Multiplexer
14002
268.00
AS Connector TC Multiplexer (needs connector 68087)
14005
373.00
Pierburg Boost Control Valve (includes connector)
58004
121.00
3 Port Boost Control Valve
58020
94.00
M4/M48 SUU Software Update Unit
63008
107.00
68087
65.00
Part No.
Price
ECU Accessories include a mating connector unless otherwise stated
ECU Accessory Connectors
22 Pin Autosport IEX/TCMux Connector (AS612-35SN)
DBW-4 Drive By Wire Module
The DBW-4 works with M400/M600/M800/M880 ECUs running firmware V3.30T and later, and
provides 4 PID Controllers for drive by wire control, or generic PID control for servo motors. The
use of a DBW-4 does not require a DBW upgrade in your ECU. Mating connector not included
MoTeC DBW-4
66 Pin Autosport DBW-4 Connector (AS618-35SN)
Knock Monitoring and Control
14011
815.00
68089
101.00
Part No.
Price
Knock Modules work with vehicle knock sensors to provide individual cylinder closed loop knock
control, allowing tuners to safely optimise high performance ignition maps. There is a standalone
module and a version specifically designed to mount onto an M800 Plug-In ECU. A competent
tuner needs to carry out a frequency analysis to determine the target frequency and knock module
settings. This is highly specialised work.
MoTeC Knock Modules will only be available through authorised dealers that have undertaken specific training
OKM Onboard Knock Module (for M800 P&P ECUs)
53115
556.00
SKM Standalone Knock Module
53116
796.00
Part No.
Price
Mitsubishi EVO X OKM Onboard Knock Module
Knock Sensor Loom (for use with SKM)
DHB Dual Half Bridge
53121
61114
556.00
252.00
The DHB is a high current amplifier which allows low current auxiliary outputs to drive high current
loads such as motors. It contains two high current half bridge outputs, and connects to any auxiliary output of a MoTeC ECU or Dash Logger, which performs the control function, such as PWM
speed control, direction control or servo control. Mating connectors not included
DHB Dual Half Bridge (needs connectors 68050, 79121, and
79125 — see page 24)
41213
295.00
www.motec.com
PAGE 17
Lambda Measurement
LTC Lambda To CAN Module
RETAIL
JANUARY 2012
Part No.
Price
LTC Lambda to CAN Module
61300
418.00
LTCD Dual Lambda to CAN Module
61301
609.00
Part No.
Price
LTC-NTK
61304
418.00
LTC-NTKD
61305
609.00
Part No.
Price
PLM Professional Lambda Meter with LSU Sensor and Loom
15003
995.00
PLM Professional Lambda Meter with NTK Sensor and Loom
15002
1322.00
PLM Professional Lambda Meter with LSU 4.9 Sensor & Loom
15005
1350.00
PLM Professional Lambda Meter only
15004
895.00
10m Bosch PLM Extension Loom
61045
350.00
MoTeC’s LTC (Lambda to CAN) modules monitor, control and diagnose Bosch LSU 4.9 Lambda sensors, transmitting readings on a
CAN bus. When multiple LTCs are used, up to 32 Lambda sensors
can be configured on a single CAN bus, allowing a CAN-enabled
ECU or logging device to simultaneously monitor numerous
Lambda sensors. The LTC is also available as a dual version LTCD
to work with two sensors into one module. Sensor sold separately.
LTC-NTK
MoTeC’s LTC NTK (Lambda To CAN) module monitors, controls
and diagnoses an NTK Lambda sensor, and transmits Lambda
readings on a CAN bus. When using LTC NTKs, up to 32 Lambda
sensors can be configured on a single CAN bus allowing an
ECU or logging device to simultaneously monitor multiple Lambda
sensors. Compatible with NTK UEGO sensors. Sensor sold separately.
PLM Professional Lambda Meter
Standard 2.6m PLM Loom (available individually as a spare)
PLM NTK Adaptor Loom
PLM Bosch LSU 4.9 Adaptor Loom
61038
61105
103.00
57.00
61118
65.00
Part No.
Price
Bosch Wide Band Lambda Sensor (LS11 for M4/M48/M8)
57001
171.00
Bosch LSU 4.9 Lambda Sensor (for M800 series, PLM, LTC)
57006
143.00
Lambda Sensors & Accessories
Bosch LSU 4.0 Lambda Sensor (for M800 series and PLM)
NTK Lambda Sensor (for M800 series and PLM)
57003
57007
225.00
64006
19.00
Stainless Steel Weld-on Boss Including Bung
59002
Bosch LSU 4.9 Connector
64010
Bosch LSU 4.0 Connector
M800 OEM Lambda Adaptor (300mm from OEM to DTM plug)
M800 OEM LSU 4.0 Adaptor (3m from DTM to LSU 4.0 plug)
M800 OEM LSU 4.9 Adaptor (2m from DTM to LSU 4.9 plug)
www.motec.com
113.00
61044
61050
61051
21.00
16.00
40.00
44.00
44.00
PAGE 18
Ignition System Components
CDI Capacitive Discharge Ignition
RETAIL
JANUARY 2012
Part No.
Price
MoTeC CDI/4 (for use with an ECU)
41003
746.00
MoTeC CDI/8
26 Pin Autosport CDI/8 Connector (AS616-26SN)
14004
68086
1367.00
1000Hz Single Channel CDI Module (for use with an ECU)
41013
370.00
650Hz Dual Channel CDI Module (for use with an ECU)
41005
527.00
Part No.
Price
Single Coil
42001
40.00
Denso Single Coil (built-in amplifier, includes connector)
42012
98.00
Bosch Single Coil
42014
45.00
The CDI/4 can be used as an ignition driver from an
ECU to drive up to 4 individual high energy CDI
coils. Mating connector included
The CDI/8 can be used as an ignition driver from an
ECU to drive up to 8 individual high energy CDI coils
or can be used with external sensors as a standalone system. As a stand-alone unit it can be programmed from a PC running on its own dedicated
sensors. Mating connector not included
Ignition Coils & Amplifiers
Ignition Coils
89.00
Bosch 4 Cylinder Coil Pack (wasted spark)
42025
105.00
CDI Coil (PS92)
42020
134.00
CDI Coil (wasted spark)
42021
50.00
Bosch 6 Cylinder Coil Pack (wasted spark)
42022
63.00
Single Mercury CDI Coil
42011
76.00
Single CDI Coil
42030
131.00
Bosch HT Coil Connections
46001
3.00
Bosch HT Coil Covers
46002
3.00
IGN4 - Compact Quad Channel Ignition Amplifier
(Please contact us before ordering)
41212
225.00
Single Channel Ignition Amplifier
41124
103.00
Single Channel Ignition Amplifier (with tacho. output)
41008
120.00
Triple Channel Ignition Amplifier
41203
158.00
Triple Channel Ignition Amplifier (dual connector)
41205
170.00
Quad Channel Ignition Amplifier (dual connector)
41204
225.00
Ignition Combiner (provides a tacho output — refer to MoTeC
drawing A10)
53110
70.00
Ignition Amplifiers
Dual Channel Ignition Amplifier
41200
134.00
www.motec.com
PAGE 19
Communications Cables
CAN Communications
RETAIL
JANUARY 2012
Part No.
Price
CAN is used for laptop communications with M400/M600/M800/M880, SDC1/SDC2/MDC, oldstyle ADL8, BR2, and the new PDM16 and PDM32. The CAN cable connects to a PC parallel port,
whereas the UTC allows CAN communication via a USB port.
UTC USB to CAN Converter
61059
61021
150.00
CAN Cable and UTC Loom Connector (in line)
65038
11.00
CAN Communications Cable
160.00
CAN Cable and UTC Loom Connector (panel mount)
65030
12.00
M800 OEM CAN Adaptor (also for SDC1/SDC2)
61046
36.00
Part No.
Price
USB Cable Terminated in Autosport Sockets (1m)
61067
29.00
2m USB Cable
79140
10.00
CAR Cable (vehicle loom CAN interface)
USB Communications
61022
57.00
USB is used for laptop communications with the SDL and ADL2/EDL2.
USB Cable Terminated in Autosport Sockets (1.8m)
USB Bulkhead Connector and Cap
Ethernet Communications
61068
90100
Part No.
32.00
16.00
Price
Ethernet is used for laptop communications with ADL3, EDL3, SDL3, ESDL3 and ACL. We now
supply a Bulkhead Ethernet cable terminated with Autosport sockets..
ACL Ethernet Communications Cable
61112
128.00
Ethernet RJ45 Bulkhead to Autosport Sockets 1.8M
NOTE: You will also need a standard RJ45 cable to work with this
product
61132
46.00
Part No.
Price
Serial Communications
A serial connection is used for laptop communications with M4, M48, M8 ECUs, and the PLM,
2m PCI Cable (M48, M8 and early M4)
63003
RS232 Comms Cable (M4e and PLM)
61070
6m PCI Cable (M48, M8 and early M4)
105.00
63004
120.00
61027
168.00
D9 Adaptor (for use with PCI cable on M4 <3000, M48, M8 )
61010
34.00
D9 – 232 Adaptor (M4 only)
61016
27.00
CIM Kit (ECU to SDL/ADL/ADL2 Interface for M4, M48, M8)
D9 Adaptor (Mitsubishi/Subaru for M48 OEM conversion)
D9 Mil Spec Adaptor (for mil spec M4, M48, and M8 ECU)
USB to Serial Adaptor
61012/3
61011
90099
11.00
40.00
115.00
45.00
www.motec.com
PAGE 20
Sensors
RETAIL
JANUARY 2012
Need a connector fitted? See page 24 for details of our Sensor Termination Service
Speed Sensors
Part No.
Price
Speed sensors are used to measure cam and crank position, or wheel speed. Hall Effect sensors
provide an open collector output, suitable for REF/SYNC and digital inputs on ECUs, and digital or
speed inputs on Dash Loggers. Inductive sensors output a voltage waveform due to a changing
magnetic field, and are suitable for use on REF/SYNC inputs on ECUs, and speed inputs on Dash
Loggers.
Hall Effect Sensors
GT101 (19mm plastic body)
57101
61.00
Miniature Vane Sensor (plastic body)
57109
62.00
Threaded Hall Probe (M12x1, 36mm stainless steel body)
57111
82.00
Inductive Probe (7/16 x 20tpi threaded steel body)
Requires Magnet below PN 57115
57114
103.00
Magnet for Sensor 57114
57115
21.00
57104
57.00
Inductive Sensors
Magneti Marelli SEN 8D Sensor
Magnetic to Hall Speed Sensor Conversion
The DMC-D converts signals from two magnetic speed sensors into ’Hall Effect’ signals, suitable
for digital inputs. The DMC-D is housed in a 12-way DTM male connector, so requires a 12-way
DTM female connector (not supplied) for a wiring loom interface.
DMC-D Dual Magnetic Converter
53118
58.00
12 Way Female DTM Connector Kit for DMC-D
68060
14.00
Part No.
Price
Pitot Tubes
Pitot Tubes are used for air speed measurement, which gives a reference speed when analysing
aerodynamic performance data. The assembly supplied by MoTeC Europe includes a pitot tube
and attached differential pressure sensor. The sensor is calibrated and logged as a pressure difference, which is then converted into an air speed value in i2 Pro using a maths function.
Note: lead time on Pitot Tubes is normally 3-4 weeks from time of order
130mm Pitot Tube Assembly
300mm Pitot Tube Assembly
25mbar (up to ~230km/h)
53204
550.00
50mbar (up to ~330km/h)
53205
550.00
70mbar (up to ~390km/h)
53206
550.00
25mbar (up to ~230km/h)
53207
650.00
50mbar (up to ~330km/h)
53208
650.00
70mbar (up to ~390km/h)
53209
650.00
www.motec.com
PAGE 21
Sensors
RETAIL
JANUARY 2012
Need a connector fitted? See page 24 for details of our Sensor Termination Service
Temperature Sensors
Part No.
Price
Delco Air Temperature (3/8 NPT)
54001
60.00
Bosch Air Temperature (M12x1.5)
54002
29.00
Air Temperature with Fly Lead (M10x1)
54003
65.00
Air Temperature with Fly Lead (M12x1.5)
54005
67.00
Bosch –40 to 150°C Fluid Temperature (M12x1.5)
55002
24.00
Bosch –40 to 150°C Fluid Temperature (M10x1)
55003
40.00
–30 to 150°C Fluid Temperature with Fly Lead (M10x1)
55004
58.00
Bosch 2 Pin Female Connector Kit
65008
6.00
Variable Resistance
–30 to 150°C Fluid Temperature with Fly Lead (M12x1.5)
Delco Air Temperature Sensor Connector Kit
55005
64001
60.00
10.00
Thermocouples
K type thermocouples are often used to measure exhaust temp. If used with an ECU or Dash Logger, an Amplifier is required. If used with an E888 or VIM, the amplifier is not required.
MoTeC Thermocouple Amplifier
58008
111.00
K type Thermocouple Kit (150mm probe length)
58005
61.00
58012
18.00
K type Thermocouple Kit (75mm probe length)
58009
K type Sensor Female Socket
58017
1/8NPT Thermocouple Stainless Steel Fitting and Gland Nut
K type Sensor Male Plug
65048
61.00
6.00
7.00
Non-Contact Infra Red
Infra Red sensors allow non-contact temperature measurement, and are often used for tyre or
brake temperature monitoring.
0 – 150°C Infra Red Sensor (plastic body) (very limited stock)
52003
105.00
0 – 150°C Infra Red Sensor (aluminium body)
52009
179.00
0 – 1200°C Infra Red Sensor (best for carbon brakes)
52005
336.00
0 – 1000°C Infra Red Sensor (best for steel brakes)
52006
336.00
Manifold Pressure Sensors (Absolute)
Part No.
Price
53000
145.00
53003
132.00
4bar Standard Sensor (integral connector, with mating half)
58060
116.00
4bar Professional Sensor (flylead connection)
58040
147.00
1bar High Accuracy Delco MAP Sensor (connector supplied)
1bar Delco MAP Sensor (connector supplied)
3bar Delco MAP Sensor (connector supplied)
These 4bar sensors feature a 3/8”UNF (–03) fitting.
www.motec.com
53001
78.00
PAGE 22
Sensors
RETAIL
JANUARY 2012
Need a connector fitted? See page 24 for details of our Sensor Termination Service
Fluid Pressure Sensors (Gauge)
Part No.
Price
5 and 10 bar sensors are for Fuel and Oil Pressure, with 170 bar sensors used for Brake Pressure
Basic VDO Sensors - 1/8”NPT Fitting
5bar VDO Sensor (screw terminals)
10bar VDO Sensor (screw terminals)
58002
63.00
58003
63.00
58061
116.00
5bar Professional Sensor (flylead connection)
58041
147.00
100bar Professional Sensor (flylead connection)
58044
147.00
Standard Sensors - 3/8”NPT (-03) Fitting
10bar Standard Sensor (integral connector, with mating half)
170bar Standard Sensor (integral connector, with mating half)
Professional Sensors - 3/8”NPT (-03) Fitting
10bar Professional Sensor (flylead connection)
170bar Professional Sensor (flylead connection)
58062
58042
116.00
147.00
58043
147.00
Part No.
Price
57202
±4G Dual Axis G Sensor (ECU and ADL2)
57210
234.00
±4G Triple Axis G Sensor (ECU)
57203
447.00
±4G Single Axis G Sensor (ADL2)
57205
234.00
±4G Triple Axis G Sensor (ADL2)
57206
447.00
100°/s Single Axis Gyro
79130
530.00
150°/s Single Axis Gyro
79131
530.00
Part No.
Price
Motion Sensors
±4G Single Axis G Sensor (ECU)
Strain Gauges
328.00
Gearshift load cells are used for flat shift functions, and we can supply kits for sequential or Hpattern gearboxes providing an amplified 0-5V output. We can also supply amplifiers for existing
strain gauges. Note that strain gauge products are made to order so are subject to a lead time.
Sequential Gearshift Load Cell Kit
95004
604.00
H-Pattern Gearshift Load Cell Kit
95005
604.00
Motorcycle Quickshift Loadcell
79104
300.00
Strain Gauge Amplifier
Rotary Position Sensors
95007
Part No.
262.00
Price
Rotary potentiometers are used for measurement of parameters such as Throttle Position, Steering Angle, and Gear Barrel Position in sequential transmissions.
Standard D-drive Throttle Position Sensor (right hand, black)
56001
116.00
100° Sprung Shaft Potentiometer
59008
116.00
Standard D-drive Throttle Position Sensor (left hand, white)
350° Sprung Shaft Potentiometer
Multi Turn Steering Angle Kit (10 turn pot, 2 gears, and belt)
56002
59013
59006
116.00
116.00
131.00
www.motec.com
PAGE 23
RETAIL
Sensors
JANUARY 2012
Need a connector fitted? See page 24 for details of our Sensor Termination Service
Linear Position Sensors
Part No.
Price
Linear potentiometers are mainly used for measuring damper or suspension movement, but can
be used in a variety of other applications, such as throttle pedal position measurement.
50mm Linear Potentiometer
57152
156.00
100mm Linear Potentiometer
57156
179.00
75mm Linear Potentiometer
57153
150mm Linear Potentiome
Potentiometer
57155
200mm Linear Potentiometer
75mm Slimline Linear Pot (Pop Joint) - Rear Suspension
150mm Slimline Linear Pot (Pop Joint) - Front Suspension
Rose Joint End for Slimline Potentiometers
Ride Height Sensors
57158
79160
79161
79162
Part No.
168.00
189.00
200.00
168.00
189.00
9.00
Price
Ultrasonic Ride Height Sensors allow detailed analysis on cars featuring significant aerodynamic
performance. The sensors are available in a variety of measurement ranges, with two different
levels of voltage output, depending on the type of input used on the data acquisition system.
These sensors have been successfully used in single-seater and Le Mans Prototype, applications.
Sensor supplied fitted with AS connector. Please contact us to discuss your requirements
0-5V (suitable for hi-res ADL2 AV inputs)
0-10V (suitable for normal ADL2 AV inputs)
Sensor Termination Service
150mm Range
79315
498.00
250mm Range
79317
498.00
200mm Range
150mm Range
79316
79318
498.00
498.00
200mm Range
79319
498.00
250mm Range
79320
498.00
Part No.
Price
MoTeC generally supplies sensors with an unterminated fly lead so that you can choose which connector to
fit, to match existing loom connectors, or budgetary constraints. However we now offer a termination service,
to fit either a DTM or Autosport connector. In each case the sensor fly lead is covered with Raychem DR25
heatshrink, and the connector has a heatshrink boot for added protection. Default specifications are outlined
below, however please contact us to specify alternative lead lengths, pinouts, or connector specifications
Autosport Connector Fitting
Default fitting of 5-pin AS male connector
(ASL606-05PN), with lead length of
300mm from sensor body to back face of
connector. Alternative AS keyways are
available on request.
Autosport Connector Fitting
DTM Connector Fitting
Default fitting of 3-pin DTM male connector (DTM04-3P), with lead length of
300mm from sensor body to back face of
connector.
Pin 1
Ground
Pin 3
Power
Pin 2
Pin 4
Pin 5
Pin 1
Pin 2
Pin 3
Signal
N/C
N/C
78001
75.00
78002
50.00
Ground
Signal
Power
DTM Connector Fitting
www.motec.com
PAGE 24
Wiring & Connectors
Wiring Looms
RETAIL
JANUARY 2012
Part No.
Price
Adaptor Looms
If you require an adaptor loom as an interface between any of our M4/M48 or M400/M600/M800 /
M880 ecu’s and a particular vehicle we have most of the requisite circuit pin out drawings and
components in stock.
Once we know the details of your vehicle and specific requirements we can recommend a choice
of authorised specialist wiring manufactures from within our network who would be able to quote
for and supply an adaptor loom to suit your application.
Unterminated Looms
M4 Cut-to-Fit Loom (2.5m unterminated)
61001
150.00
M48 Cut-to-Fit Loom (2.5m unterminated)
61002
150.00
M8 Cut-to-Fit Loom (2.5m unterminated)
61003
150.00
M400, M600, M800 & M84Cut-to-Fit Loom (2.5m unterminated)
61004
275.00
M880 Cut-to-Fit Loom (2.5m unterminated)
61005
P.O.A.
ADL Cut-to-Fit Loom (3m unterminated)
61020
325.00
ADL2 Cut-to-Fit Loom with USB (3m unterminated)
61099
350.00
ADL3 Cut-to-Fit Loom (3m unterminated)
61213
395.00
SDL Cut-to-Fit Loom (3m unterminated)
61023
300.00
SDL3 Cut-to-Fit Loom (3m unterminated)
62202
390.00
ECU Connectors
Part No.
Price
36 Way MoTeC M4/M48/M8 Connector
65036
32.00
18 Way MoTeC M8/IEX/TCMux/CDI/4 Connector
65018
27.00
34 Way MoTeC M400/M600/M800/E888 Connector
65044
21.00
26 Way MoTeC M400/M600/M800/E888 Connector
65045
20.00
M800 Series Connector Kit
95560
39.00
69012,3,4
25.00
Mitsubishi/Subaru ECU Connectors (16,22 & 26 way )
ECU Connector Spare Pins
M800 Spares Pins
65546
0.16ea
M4/M48/M8/IEX/TCM Spare Pins
65024
0.17ea
Seals for M4/M48/M8/IEX/TCMux Pins
65025
0.15ea
www.motec.com
PAGE 25
Wiring & Connectors
RETAIL
JANUARY 2012
All kits contain shell, contacts, and seals. Male/Female descriptions refer to the pin type, not the
connector or housing shape.
Military Connectors
Part No.
Price
55 Way M8 Mil Spec ECU Connector
68078
100.00
10 Pin to D9 Comms Plug Connector (M8, mil spec M4/M48)
68077
53.00
Part No.
Price
13 way Autosport GPS Connector (AS610-35SA)
68010
59.00
26 way Autosport PDM/CDI8 Connector (AS616-26SN)
68086
8 way Autosport PDM16/32 Connector (AS616-08SN)
68088
55 way Autosport VIM Sensor Connector (AS616-35SN)
68090
32 Pin M4/M48 Mil Spec ECU Connector
Autosport (AS) Connectors
Autosport AS Connectors
79 way Autosport ADL2 Connector (AS620-35SN)
22 way Autosport ACL/TCMux/IEX Connector (AS612-35SN)
66 way Autosport M880/E816/DBW4 Connector (AS618-35SN)
68079
79.00
68080
110.00
68087
65.00
86.00
96.00
68089
101.00
37 way Autosport SDL/PDM Connector (AS614-35SN)
68100
78.00
AS Connector Filler Plugs
68083
AS Connector Sockets for MoTeC Product Connectors
81.00
68082
0.65ea
5 way ASL BR2/VIM Connector (ASL606-05SN)
68098
30.00
5 way Male ASL Connector (ASL606-05PN)
68103
30.00
Autosport ASL Connectors
5 way Female ASL Connector (ASL106-05SN)
5 way ASL Ethernet Loom Connector (ASL106-05PN)
5 way Flanged ASL Ethernet Loom Connector(ASL006-05PN)
ASL Connector Sockets
68102
79102
79103
0.59ea
32.00
25.00
30.00
68068
3.00ea
3 way Female Autosport (ASU103-03SN)
65120
39.00
ASU Connector Pins
68074
3.00ea
Part No.
Price
Delco 1 Bar MAP Sensor Connector
64002
10.00
Standard Pressure Sensor Spare Connector
65013
12.00
ASL Connector Pins
Autosport ASU Connectors
3 way Male Autosport (ASU603-03PN)
ASU Connector Sockets
Pressure Sensor Connectors
Delco 3 Bar MAP Sensor Connector
68069
65121
68075
64003
2.00ea
35.00
4.00ea
10.00
www.motec.com
PAGE 26
Wiring & Connectors
Bosch Connectors
RETAIL
JANUARY 2012
Part No.
Price
2 Way Male Kit
65007
6.00
3 Way Female Kit
65012
2 Way Female Kit
4 Way Female Kit
5 Way Female Kit
65008
6.00
65140
7.00
65144
11.00
65142
6 Way Female Kit
7 Way Female Kit
6.00
8.00
65010
13.00
Part No.
Price
2 Way Female Kit
68050
5.00
3 Way Female Kit
68052
6.00
DTM Connectors
2 Way Male Kit
68051
3 Way Male Kit
68053
4 Way Female Kit
4 Way Male Kit
6 Way Male Kit
7.00
68056
8.00
68057
8 Way Female Kit
8 Way Male Kit
12 Way Male Kit
7.00
8.00
68058
10.00
68060
16.00
68059
12 Way Female Kit
6.00
68054
68055
6 Way Female Kit
5.00
10.00
68061
16.00
Part No.
Price
79125
8.00
Part No.
Price
1 Way Female Kit
65216
3.00
2 Way Female Kit
65201
3.00
DTP Connectors (for DHB)
2 Way Female Kit
2 Way Male Kit
79121
AMP Connectors
1 Way Male Kit
65215
2 Way Male Kit
65200
3 Way Female Kit
65203
3 Way Male Kit
65202
4 Way Female Kit
65205
4 Way Male Kit
5 Way Female Kit
6 Way Female Kit
6 Way Male Kit
3.00
3.00
3.00
4.00
4.00
65206
5.00
65208
6.00
65209
www.motec.com
3.00
65204
65207
5 Way Male Kit
8.00
5.00
6.00
PAGE 27
Wiring & Connectors
Cable
RETAIL
JANUARY 2012
Price
Raychem Type 44 Cable
22g
20g
Black
90111
69999
1.00/m
Yellow
90102
70005
1.00/m
White
90101
Green
90103
Red
90104
Blue
90105
Pink
90106
Brown
90107
Orange
90108
Grey
90109
Violet
90110
Special Cable
3 Core Cable (22g with PTFE sleeving)
High Temperature Ethernet Cable (for PC Comms)
70004
70007
70000
70006
70010
70008
70009
70011
70012
81003
1.00/m
1.00/m
1.00/m
1.00/m
1.00/m
1.00/m
1.00/m
1.00/m
1.00/m
8.00/m
79350
17.00/m
Part No.
Price
3.2mm diameter
62003
1.35/m
6.4mm diameter
62005
1.65/m
62007
2.50/m
3.2mm diameter
62020
5.50/m
12.7mm diameter
62024
10.00/m
92003
4.20/m
Heatshrink
Heatshrink
4.8mm diameter
62004
9.5mm diameter
62006
12.7mm diameter
19.0mm diameter
62008
Adhesive-Lined Heatshrink
6.4mm diameter
62022
19.0mm diameter
62025
Raychem DR25 Heatshrink
1/8” diameter (3.2mm)
1.55/m
2.25/m
3.65/m
7.50/m
12.00/m
3/16” diameter (4.8mm)
92004
6.00/m
1/2” diameter (12.7mm)
92006
7.45/m
1/4” diameter (6.4mm)
92005
3/4” diameter (19.0mm)
92007
6.15/m
11.40/m
www.motec.com
PAGE 28
Wiring & Connectors
Heatshrink Boots
RETAIL
JANUARY 2012
Part No.
Price
202K163-25 Boot (ADL2)
65108
14.00
202K142-25 Boot (SDL, ACL, IEX, TCM)
65110
11.00
222K163-25 90 deg Boot (ADL2)
65111
17.00
222K142-25 90 deg Boot (SDL, ACL, IEX, TCM)
65113
13.00
Raychem Heatshrink Boots for MoTeC Products
202K153-25 Boot (M880, E816, DBW4, VIM)
202K121-25 Heatshrink Boot with Retention Lip
65109
65100
222K152-25 90 deg Boot (M880, E816, DBW4, VIM)
65112
222K121-25 90 deg Heatshrink Boot
65114
Heatshrink Boots for Sensors
12.00
9.00
14.00
11.00
202A111-25 Boot for ASL Connector
65105
7.00
202A121-25 Heatshrink Boot
65107
9.00
Hellermann 1030-4-G Boot for ASL Connector
65122
202A111-25/225 Pre-glued Boot for ASL Connector
222A111-25 90 deg Boot for ASL Connector
Hellermann 1030-4-GW24 Pre-glued Boot for ASL Connector
65106
8.00
65115
11.00
65116
8.00
6.00
Hellermann 1181-4-G 90 deg Boot for ASL Connector
65117
10.00
204W221-25/225 Pre-glued Boot for ASU Connector
65101
7.00
Part No.
Price
204W221-25 Boot for ASU Connector
224W221-25 90 deg Boot for ASU Connector
Protective Sleeving
65118
65119
7.00
9.00
Heat sleeving to protect wiring from extremes of temperature near exhausts or turbos, providing
continuous protection up to 200°C, and able to withstand momentary peaks of 350°C .
5mm diameter Heat Sleeving
10mm diameter Heat Sleeving
92100
9.00/m
92101
13.00/m
Part No.
Price
MoTeC Military Crimp Tool (fits all MoTeC mil type pins)
68073
247.00
M800 Crimp Tool
67024
285.00
Wiring Tools
Crimping & Stripping
Packard Crimp Tool
Universal Wire Stripper
67022
90018
De-Pinning
Autosport 22g De-Pinning Tool (plastic)
90003
Autosport 16g De-Pinning Tool (plastic)
90006
Autosport 20g De-Pinning Tool (plastic)
Delco De-Pinning Tool (metal)
www.motec.com
90005
68001
228.00
24.00
2.00
3.00
5.00
58.00
PAGE 29
Accessories
Buttons & Switches
RETAIL
JANUARY 2012
Part No.
Price
Illuminated 12mm Momentary Button
67100
15.00
Illuminated 8mm Momentary Button
67102
13.00
67506/7/8/9
4.25
Illuminated 12mm Latching Button
Illuminated 8mm Latching Button
Lenses for 12mm Button (blue, green, red, yellow)
Lenses for 8mm Button (green, red, yellow)
Lamps and LEDs for 12mm & 8mm Buttons
19mm Push Buttons (blue, green, red, yellow)
Miniature Toggle Switch (DPDT)
Miniature Toggle Switch (SPDT)
10 Position Resistive Rotary Switch
Gear Cut Roller Micro Switch
2009 Yamaha R1 Gear Position Adaptor (includes mating half)
Handlebar Switch Gear
67101
67103
67513/4/5
67501
15.00
13.00
1.50
1.50
67111/2/3/4
10.50
67203
6.00
67201
7.00
56100
105.00
79120
79.00
67115
Part No.
16.00
Price
MoTeC can supply a handlebar switch assembly which can be used to provide functions such as
pit speed limiter, ECU map select and traction control on/off and up/down trim.
Motorcycle Handlebar Switch Gear
Illumination
ADL2 Voltage Inverter (for backlit ADL2 only)
Dimmer Switch For Backlit SDL, ADL2, ADL3
SLM
79105
299.00
Part No.
Price
61035
151.00
Part No.
Price
61036
16.00
The SLM Shift Light Module features eight full-colour (RGB) LEDs.
The lights can be used for Shift Lights, Warning Lights, or other indicators. Each LED is fully independent as to the purpose, colour, and
brightness. The SLM works via CAN in conjunction with MoTeC M400/
M600/M800/M880 ECUs, SDL and ADL2 Dash Loggers, and the ACL. An uncased OEM version
is available for integration into your won steering wheel design.
SLM Shift Light Module
18120
250.00
SLM OEM (uncased SLM for steering wheel integration)
18121
231.00
SLM-C Club Shift Light Module (pre-defined shift pattern)
18122
225.00
Part No.
Price
67520/1/2/3
10.00
67543
16.00
Shift/Warning LEDs
7mm Panel Light (blue, green, red, yellow)
10mm Panel Light (green, red, yellow)
10mm Panel Light (tri-colour)
Multi-Coloured LED Array (low cost alternative to SLM)
67540/1/2
68007
12.00
25.00
www.motec.com
PAGE 30
RETAIL
“Race smart.” Clothing
JANUARY 2012
“Race smart.” Clothing
Part No.
Price
Get the MoTeC look with our eyecatching “Race smart.” gear! The range includes a cap, polo
shirt, and jacket. Images and more information can be seen on the website at
www.motec.com.au/aboutmerchandise/merchandiseoverview. Please contact us to discuss
sizing availability before placing your order
“Race smart” Cap
99512
10.00
“Race smart” Polo Shirt
See Table
25.00
“Race smart” Jacket
See Table
75.00
XL
2XL
3XL
ITEM
SIZE
S
M
L
Polo Shirt
99500
99501
99502
99503
99504
99505
Jacket
99506
99507
99508
99509
99510
99511
Training & Support Services
MoTeC Training Seminars
Duration
Price
MoTeC offer in-house product training seminars, covering the installation and set-up of Engine
Management Systems, or Data Acquisition Systems. The seminars are held at MoTeC Europe in
Adderbury, with course literature, lunch, and refreshments all provided. Please contact us to discuss your requirements further. Price quoted is per person.
MoTeC ECU Training
MoTeC Data Acquisition and Analysis Training
Technical Field Support
1 Day
150.00
Duration
Price
1 Day
150.00
In addition to telephone support, MoTeC regularly supplies Technical Support Engineers for Track
Support or on-site Tuning & Training. Contact us to enquire about booking a MoTeC Technical
Support Engineer for assistance with set up and configuration of MoTeC products and systems.
MoTeC Field Support in the UK (exclusive of expenses)
1 Day
350.00
MoTeC Field Support in R.O.W. (exclusive of expenses)
1 Day
450.00
MoTeC Field Support in Europe (exclusive of expenses)
Repairs, Testing, & Upgrades
1 Day
400.00
Price
If any of your MoTeC products require testing or repair, or require upgrade, please contact us to
obtain a Return Material Authorisation (RMA) number. Repair costs for your unit depend on
individual circumstances
Testing
MoTeC Hardware Testing
30.00
Sensor Testing & Calibration (please contact us)
P.O.A.
ADL2 Backlight Conversion—Upgrade ADL2 to Backlit
750.00
Upgrades
SDL Backlight Conversion -Upgrade SDL to Backlit
Replace Screen on ADL2 or SDL2
MDD or PLM Firmware Upgrade
www.motec.com
560.00
410.00
F.O.C.
PAGE 31
RETAIL
JANUARY 2012
Where to find us
Directions
Leave the M40 at J10 and follow signs for the A43 north. Turn left at the Esso garage roundabout onto the B4100. Follow for 7 miles into Adderbury. At the traffic lights turn left, continue
past the Red Lion pub. Take the second left outside the village sign posted Twyford Mill (Fired
Earth site)
Address
MoTeC (Europe) Ltd
Unit 14, Twyford Mill Ind. Est.
Oxford Road
Adderbury
OX17 3SX
www.motec.com
PAGE 32
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising