42004-726L2GQG

42004-726L2GQG
Pub. 42004-726L2GQG
GAI-TRONICS® CORPORATION
A HUBBELL COMPANY
ICS Page/Party Remote Subset Handset/Speaker Amplifier Station
Quick Installation Guide
®
Important Safety Instructions
1. Read, follow, and retain instructions – All safety and operating instructions should be read and followed before operating the unit. Retain instructions for future
reference.
2. Heed warnings – Adhere to all warnings on the unit and in the operating instructions.
3. Attachments – Attachments not recommended by the product manufacturer should not be used, as they may cause hazards.
4. Servicing – Do not attempt to service this unit by yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
5. This permanently connected apparatus must have a UL Listed 15-amp circuit breaker incorporated in the electrical installation of the building.
USA and Canada Consult the National Electrical Code (NFPA 70), Canadian Standards Association (CSA 22.1), and local codes for specific requirements regarding
your installation. Class 2 circuit wiring must be performed in accordance with NEC 725.55.
WARNING
In 24 V dc systems: Under NO condition should this equipment be operated from a battery charger without the batteries connected.
In 24 V dc systems, most chargers have an unloaded output of 35 to 45 volts that can quickly damage the equipment designed for nominal 24 volts. The maximum
battery voltage should never exceed the maximum specified input voltage.
General Information and Available Options
This guide covers the installation of the ICS Page/Party® Remote Subset Handset/Speaker Amplifier Station. Figure 1 shows configurations with
the following options:
 Universal ac or 24 V dc
power
 Single or multi-party
system
 SmartSeries
 VLC
 RTU
 Conformal coating for PCBA
 70V/100V speaker output
All ICS Stations are wired in
parallel. Good system layout
design minimizes the cable
required. ICS Page/Party®
Remote Subset Handset/
Speaker Amplifier Stations are
®
Figure 1. ICS Page/Party Remote Subset Handset/Speaker Amplifier Station
designed to be used in
with available options (AC Version shown)
conjunction with remote
subsets. Refer to Pub. 42004-726L2 at the “Manuals & Specs” link at www.gai-tronics.com for detailed explanations of the available
configuration options and adjustments, available remote subsets, system design information, and warranty.
Mounting and Wiring
Mount the enclosure using the four 0.312-inch (8 mm) diameter holes located on the mounting flanges with ¼-inch (M6) hardware.
The ICS Page/Party® Remote Subset Amplifier Station is not supplied with conduit or cable openings. Remove the front panel and
drill or punch entry openings in the rear section of the enclosure. Refer to Figure 2 for the suggested locations. There must be a
minimum of ½ inch (13 mm) of material between entry holes. The station is suitable for top or bottom entry per Figure 2. However,
GAI-Tronics recommends bottom entry only wherever possible. For specific details including mounting hole dimensions, refer to
Figure 2. When mounting the enclosure, use caution to avoid damaging the internal components.
Basic wiring connections are shown in Figure 3. Use GAI-Tronics 60029 series multi-party cable or 60038 series single party cable
terminated with #6 spade lugs. Torque the terminal block screws to 8–10 in-lbs. (0.90–1.13 n-m) when attaching the spade lugs.
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
®
ICS Page/Party Remote Subset Handset/Speaker Amplifier Station Quick Installation Guide
Pub. 42004-726L2GQG
Page 2 of 2
Available Adjustments
Most optional equipment is preconfigured to a default standard at the factory. The
following is a partial list of the available adjustments and settings that may be
needed:
Main PCBA
 Speaker Volume
 Receiver Volume
 Transmit Level
 Mutual Muting
VLC Option
 Speaker Volume
 VLC Override
 Test Tone
 Page Control
 Remote Signaling
SmartSeries Option
 FSK Transmit Level
 Address
Termination PCBA
 Speaker Impedance
Figure 2. Suggested wire entry locations
Figure 3. Typical installation wiring configuration
NOTE: Station input power can be through system cable or through a separate power source
cable. See Pub. 42004-726L2 for the possible beacon, RTU activation, and speaker impedance
configurations.
Front Cover Reattachment
Connect any cable harnesses that were disconnected during mounting. Place the front cover on the rear enclosure, being careful not to
pinch any cables. Attach the front cover with the four screws and washers provided. Torque screws to 10–12 in-lbs (1.13–1.36 n-m).
NRTL Listed for USA and Canada ..................................................................................................................................... UL/CSA 60950
CE Mark
f:\standard ioms - current release\42004-xxxxqg quick guides\42004-726l2gqg.doc
11/14
Warranty
Equipment.
GAI-Tronics warrants for a period of one (1) year from the date of shipment, that any
GAI-Tronics equipment supplied hereunder shall be free of defects in material and workmanship, shall
comply with the then-current product specifications and product literature, and if applicable, shall be fit
for the purpose specified in the agreed-upon quotation or proposal document. If (a) Seller’s goods prove
to be defective in workmanship and/or material under normal and proper usage, or unfit for the purpose
specified and agreed upon, and (b) Buyer’s claim is made within the warranty period set forth above,
Buyer may return such goods to GAI-Tronics’ nearest depot repair facility, freight prepaid, at which time
they will be repaired or replaced, at Seller’s option, without charge to Buyer. Repair or replacement shall
be Buyer’s sole and exclusive remedy. The warranty period on any repaired or replacement equipment
shall be the greater of the ninety (90) day repair warranty or one (1) year from the date the original
equipment was shipped. In no event shall GAI-Tronics warranty obligations with respect to equipment
exceed 100% of the total cost of the equipment supplied hereunder. Buyer may also be entitled to the
manufacturer’s warranty on any third-party goods supplied by GAI-Tronics hereunder. The applicability
of any such third-party warranty will be determined by GAI-Tronics.
Services.
Any services GAI-Tronics provides hereunder, whether directly or through subcontractors,
shall be performed in accordance with the standard of care with which such services are normally
provided in the industry. If the services fail to meet the applicable industry standard, GAI-Tronics will
re-perform such services at no cost to buyer to correct said deficiency to Company's satisfaction provided
any and all issues are identified prior to the demobilization of the Contractor’s personnel from the work
site. Re-performance of services shall be Buyer’s sole and exclusive remedy, and in no event shall GAITronics warranty obligations with respect to services exceed 100% of the total cost of the services
provided hereunder.
Warranty Periods.
Every claim by Buyer alleging a defect in the goods and/or services provided
hereunder shall be deemed waived unless such claim is made in writing within the applicable warranty
periods as set forth above. Provided, however, that if the defect complained of is latent and not
discoverable within the above warranty periods, every claim arising on account of such latent defect shall
be deemed waived unless it is made in writing within a reasonable time after such latent defect is or
should have been discovered by Buyer.
Limitations / Exclusions.
The warranties herein shall not apply to, and GAI-Tronics shall not be
responsible for, any damage to the goods or failure of the services supplied hereunder, to the extent
caused by Buyer’s neglect, failure to follow operational and maintenance procedures provided with the
equipment, or the use of technicians not specifically authorized by GAI-Tronics to maintain or service the
equipment. THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE IN LIEU OF AND
EXCLUDE ALL OTHER WARRANTIES AND REMEDIES, WHETHER EXPRESS OR IMPLIED BY
OPERATION OF LAW OR OTHERWISE, INCLUDING ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Return Policy
If the equipment requires service, contact your Regional Service Center for a return authorization number
(RA#). Equipment should be shipped prepaid to GAI-Tronics with a return authorization number and a
purchase order number. If the equipment is under warranty, repairs or a replacement will be made in
accordance with the warranty policy set forth above. Please include a written explanation of all defects to
assist our technicians in their troubleshooting efforts.
Call 800-492-1212 (inside the USA) or 610-777-1374 (outside the USA) for help identifying the
Regional Service Center closest to you.
(Rev. 10/06)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement