Alinking | UNC-9512 | Datasheet | Alinking UNC-9512 Datasheet

Alinking UNC-9512 Datasheet
This list contains all the error numbers and descriptions for Access 2007.
We hope you find this list useful for reviewing errors that may appear in
your application.
Supporting the Microsoft Access community since 1992.
FMS, Inc.
http://www.fmsinc.com/MicrosoftAccess
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
5
Invalid procedure call or argument
6
Overflow
7
Out of memory
9
Subscript out of range
10
This array is fixed or temporarily locked
11
Division by zero
13
Type mismatch
14
Out of string space
16
Expression too complex
17
Can't perform requested operation
18
User interrupt occurred
28
Out of stack space
47
Too many DLL application clients
48
Error in loading DLL
49
Bad DLL calling convention
51
Internal error
52
Bad file name or number
53
File not found
54
Bad file mode
55
File already open
57
Device I/O error
58
File already exists
59
Bad record length
61
Disk full
62
Input past end of file
63
Bad record number
67
Too many files
68
Device unavailable
70
Permission denied
71
Disk not ready
74
Can't rename with different drive
75
Path/File access error
76
Path not found
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 1 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
93
Invalid pattern string
96
Unable to sink events of object because the object is already firing events to the maximum
number of event receivers that it supports
97
Can not call friend function on object which is not an instance of defining class
98
A property or method call cannot include a reference to a private object, either as an
argument or as a return value
321
Invalid file format
322
Can't create necessary temporary file
325
Invalid format in resource file
380
Invalid property value
381
Invalid property array index
382
Set not supported at runtime
383
Set not supported (read-only property)
385
Need property array index
387
Set not permitted
393
Get not supported at runtime
394
Get not supported (write-only property)
422
Property not found
423
Property or method not found
424
Object required
429
ActiveX component can't create object
430
Class does not support Automation or does not support expected interface
432
File name or class name not found during Automation operation
438
Object doesn't support this property or method
440
Automation error
442
Connection to type library or object library for remote process has been lost. Press OK for
dialog to remove reference.
443
Automation object does not have a default value
445
Object doesn't support this action
446
Object doesn't support named arguments
447
Object doesn't support current locale setting
448
Named argument not found
449
Argument not optional
450
Wrong number of arguments or invalid property assignment
451
Property let procedure not defined and property get procedure did not return an object
452
Invalid ordinal
453
Specified DLL function not found
454
Code resource not found
455
Code resource lock error
457
This key is already associated with an element of this collection
458
Variable uses an Automation type not supported in Visual Basic
459
Object or class does not support the set of events
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 2 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
460
Invalid clipboard format
461
Method or data member not found
462
The remote server machine does not exist or is unavailable
463
Class not registered on local machine
481
Invalid picture
482
Printer error
735
Can't save file to TEMP
744
Search text not found
746
Replacements too long
2001
You canceled the previous operation.@@@1@2@5738@1
2002
You tried to perform an operation involving a function or feature that was not installed in this
version of Microsoft Office Access.@@@1@@@1
2004
There isn't enough memory to perform this operation. Close unneeded programs and try the
operation again.
2005
There isn't enough free memory to start Microsoft Office Access.@Close unneeded programs
and try again.For information on freeing memory, search the Microsoft Windows Help index
for 'memory, troubleshooting'.@@1@@@3
2006
The object name '|' you entered doesn't follow Microsoft Office Access object-naming
rules.@For more information about naming objects, click Help.@@2@1@553714184@1
2007
You already have an open database object named '|.'@Use a different name for each database
object of the same type.If you want this object to replace the original object, close the
original object, and then save this object using the same name.For more information on
renaming a database object, click Help.@@2@1@9043@1
2008
You can't delete the database object '|' while it's open.@Close the database object, and then
delete it.@@1@@@1
2009
You can't rename the database object '|' while it's open.@Close the database object, and then
rename it.@@1@@@1
2010
You can't delete the database object '|' while it's open.@Close the database object, and then
delete it.@@1@@@1
2011
The password you entered is incorrect.
2014
You have given this |1 the same name as an existing |2 in your database.@You can't give a
table and a query the same name.@Give this object a name that isn't already used by another
table or query.@1@@@1
2015
There are no registered wizards of this type.@Rerun Microsoft Office Access or Microsoft Office
Setup to reinstall the wizards. If you want to preserve your security or custom settings, back
up the Microsoft Office Access workgroup information file.For more information on backing
up files, search the Microsoft Windows Help index for 'backing up files'.@@1@@@1
2016
You can't modify the attributes of System Tables.
2017
Microsoft helps protect this Visual Basic for Applications Project with a password. You must
supply the password in the Visual Basic Editor before you can perform this
operation.@@@1@@@1
2018
The data access page name '|' you entered is misspelled or refers to a data access page that
isn't open or doesn't exist.@@@1@@@1
2019
The number you used to refer to the data access page is invalid.@Use the Count property to
count the open data access pages and make sure that the page number is not greater than
the number of open data access pages minus one.@@1@4@2019460@1
2020
Application-defined or object-defined error
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 3 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2021
One or more operators in the filter expression is invalid.@For a valid list of operators refer to
the help file@@1@@@1
2022
You entered an expression that requires a data access page to be the active
window.@@@1@2@5601@1
2023
Application-defined or object-defined error
2024
The report snapshot was not created because you don't have enough free disk space for
temporary work files.@To fix this, free up disk space (for example, empty the Recycle Bin or
delete unnecessary files).@@1@@@1
2025
The file is not in the correct format for a Microsoft Office Access project.@@@1@@@1
2026
Application-defined or object-defined error
2027
This operation is not supported for Microsoft Office Access 1.X databases.@@@1@@@1
2028
Microsoft Office Access was unable to close the database object.
2029
Microsoft Office applications cannot suspend while you have documents open from a network
location. Exit the applications or close the open documents and try again.
2030
The Microsoft Office Access project '|' will be opened read-only because one of the following
occurred:@Either the file is locked for editing by another user, the file (or the folder in which it
is located) is marked as read-only, or you specified that you wanted to open the file readonly.@@3@@@1
2031
You can't convert or enable an MDE file.@@@1@@@1
2032
Application-defined or object-defined error
2033
Name conflicts with existing module, project, or object library.@@@1@@@1
2034
Cannot Compile Project.@@@1@@@1
2035
Cannot Load Project of wrong version.@@@1@@@1
2036
Application-defined or object-defined error
2037
Microsoft Office Access could not perform name AutoCorrect during this operation. The 'Log
name AutoCorrect' option is set, but the Data and Misc. Objects is not checked
out.@@@1@@@3
2038
The file '|' cannot be opened because it has been locked by another user.
2039
Application-defined or object-defined error
2040
Microsoft Office Access can't run.@@@1@@@3
2041
Microsoft Office Access couldn't find file '|'. This file is required for startup.
2042
A system error occurred, or there isn't enough free memory to start Microsoft Office Access.
Close unneeded programs and try again.
2043
Microsoft Office Access can't find the database file '|.'@Make sure you entered the correct path
and file name.@@1@@@1
2044
You can't exit Microsoft Office Access now.@If you're running a Visual Basic module that is
using OLE or DDE, you may need to interrupt the module.@@1@@@1
2045
The command line you used to start Microsoft Office Access contains an option that Microsoft
Office Access doesn't recognize.@Exit and restart Microsoft Office Access using valid commandline options.@@1@@@1
2046
The command or action '|' isn't available now.@* You may be in a read-only database or an
unconverted database from an earlier version of Microsoft Office Access.* The type of object
the action applies to isn't currently selected or isn't in the active view.@Use only those
commands and macro actions that are currently available for this database.@1@@@1
2047
Application-defined or object-defined error
2048
There isn't enough free memory to open the file '|.'@Close unneeded programs and try
again.For more information on freeing memory, search the Microsoft Windows Help index for
'memory, troubleshooting'.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 4 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2049
Application-defined or object-defined error
2050
Enter an OLE/DDE Timeout setting from 0 through 300 seconds.@@@1@@@1
2051
The object name '|1' can't be longer than |2 characters according to Microsoft Office Access
object-naming rules.@@@1@@@1
2052
There isn't enough free memory to update the display. Close unneeded programs and try
again.
2053
The command name can't be blank.@Please choose a name.@@1@@@1
2054
Microsoft Office Access is unable to load the Visual Basic for Applications dynamic-link library
(DLL) Vbe6.@Rerun the Microsoft Office Access Setup program.@@1@@@3
2055
The expression '|' you entered is invalid.@@@1@1@11732@1
2056
Microsoft Office Access can't supply context-sensitive Help.@@@1@@@1
2057
There isn't enough stack memory left to perform the operation.@The operation is too
complicated. Try simplifying the operation.@@1@@@3
2058
The file '|' is incompatible. Microsoft Office Access needs to be reinstalled.@Run Setup to
reinstall Microsoft Office Access. If you want to preserve your security or custom settings,
back up the Microsoft Office Access workgroup information file.For more information on
backing up files, search the Microsoft Windows Help index for 'backing up
files'.@@1@@185309@3
2059
Microsoft Office Access cannot find the object '|'.@Make sure the object exists and that you
spell its name correctly.@@1@@@1
2060
You can't create a field list based on the action query '|.'@Action queries don't have fields. A
form or report must be based on a table, or on a select or crosstab query.@Change the
RecordSource property for the form or report, or open the action query and change it to a
select query.@1@1@9232@1
2061
Enter a zero or greater-than-zero number for this option.@@@1@@@1
2062
The command name must be shorter than 255 Characters.@Please choose a
name.@@1@@@1
2063
Microsoft Office Access can't create, open, or write to the index file '|'; the information (.inf)
file it uses to keep track of dBASE indexes.@The index file may be damaged, or you may not
have read/write permission for the network drive you're trying to link to.@You can link to the
dBASE file without specifying any dBASE indexes, but the existing indexes will not be used
with the linked table.@1@@@1
2064
The menu bar value '|' is invalid.@You supplied an argument to the DoMenuItem method that
refers to a menu bar that is invalid.@Use an intrinsic constant or numeric value that refers to
a valid menu bar value, such as acFormbar.@1@1@11895@1
2065
The name for the menu, command, or subcommand you entered is invalid.@You supplied an
argument to the DoMenuItem method that refers to a menu name, command, or
subcommand that is invalid.@Use an intrinsic constant or numeric value that refers to a valid
menu, command, or subcommand value, such as acRecordsMenu.@1@1@11895@1
2066
Application-defined or object-defined error
2067
A menu bar macro can only be run if the menu bar macro name is the setting used by
particular properties or options.@You tried to run a menu bar macro containing the AddMenu
action.Set one of the following properties or options to the name of the menu bar macro:*
The MenuBar property of a form or report.* The ShortcutMenuBar property of a form,
report, or control.* The Menu Bar or Shortcut Menu Bar option in the Startup dialog
box.This error also occurs if Microsoft Office Access attempts to run a menu bar macro
containing an AddMenu action that follows an action that makes some other object the active
object. For example, the OpenForm action.@@2@1@3704@1
2068
The selected item is customized and doesn't have context-sensitive Help.@For more
information on creating custom Help for a form, report, or control, click
Help.@@2@1@10930@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 5 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2069
The key or key combination |1 in |2 has invalid syntax or is not allowed.@Use the SendKeys
syntax to specify the key or key combinations.For the allowed key or key combinations, click
Help.@@2@1@10144@1
2070
You already assigned the key or key combination |1 in |2 to another macro.@Only the first key
or key combination will be used.@@2@1@10144@1
2071
The Docking property can't be set to '|1' at this time.@If you want to set the Docking property
to '|2', move the toolbar from its current position and try again.@@1@@@1
2072
All objects were imported successfully.
2073
Successfully exported '|'.
2074
This operation is not supported within transactions.@@@1@@@1
2075
This operation requires an open database.@@@1@@@1
2076
Successfully linked '|'.
2077
This Recordset is not updatable
2078
Help isn't available due to lack of memory or improper installation of Microsoft Windows or
Microsoft Office Access.@For more information on troubleshooting a low memory problem,
search the Microsoft Windows Help index for 'memory, troubleshooting'.@If you need to
reinstall Microsoft Office Access, you may want to preserve your security or custom settings.
To do so, back up the Microsoft Office Access workgroup information file.For more
information on backing up files, search the Microsoft Windows Help index for 'backing up
files'.@1@@@3
2079
Form is read-only, because the Unique Table property is not set.
2080
The toolbar or menu | already exists.@Do you want to replace the existing toolbar or
menu?@@19@@@2
2081
The Create From Macro command only works when a macro is selected in the Navigation
Pane.@@@1@@@1
2082
Application-defined or object-defined error
2083
The database '|' is read-only.@You can't save changes made to data or object definitions in
this database.@@1@@@1
2084
Field '|' is based on an expression and can't be edited
2085
The ODBC Refresh Interval setting must be from 1 through 32,766 seconds.@@@1@@@1
2086
Recordset requires a form to be updatable.
2087
Microsoft Office Access can't display the Add-ins submenu.@The Add-ins submenu expression
'|' you entered exceeds the 256-character limit.@Shorten the macroname or functionname
expression in the Menu Add-ins key of the Windows Registry setting, and then restart
Microsoft Office Access.For more information on customizing Microsoft Office Access settings
in the Windows Registry, click Help.@2@1@9015@3
2088
Microsoft Office Access can't display the Add-ins submenu | because a setting you entered in
the Windows Registry is missing a macro name or function name expression.@@Supply the
missing expression in the Menu Add-ins key of the Windows Registry, and then restart
Microsoft Office Access.For more information on customizing Microsoft Office Access settings
in the Windows Registry, click Help.@2@1@9015@3
2089
Microsoft Office Access can't display the same menu more than once in a menu
bar.@@@1@1@3704@1
2090
An action within the current global menu's macro group can't change the global menu
bar.@Microsoft Office Access can't display the global menu bar because the macro called when
you first set the global menu includes another action that tries to reset the global
menu.@Check your menu bar macros, and make sure that you set the global menu bar only
once.@1@@@1
2091
'|' is an invalid name.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 6 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2092
The value you specified for the Setting argument in the SetOption method is not the correct
type of Variant for this option.@You specified a string when Microsoft Office Access expected a
number.@See the Access Options dialog box (click the Microsoft Office Button, and then click
Access Options) to see what type of data is required to set this particular option. For example,
the setting for the Default Database Folder option must be a string. To see what type of
Variant you passed to the SetOption method, use the VarType function.For more
information, search the Help index for 'Variant data type' and 'VarType function'.@1@@@1
2093
The numeric value for the Setting argument in the SetOption method does not correspond to
any list box or option group settings in the Access Options dialog box.@Valid settings are 0
(the first item in the list) through | (the last item in the list).@@1@1@6210@1optimize.ids
2094
Microsoft Office Access cannot find the toolbar '|.'@You tried to run a macro that includes a
ShowToolbar action or a Visual Basic for Applications procedure that includes a ShowToolbar
method.* The toolbar name might be misspelled or might refer to a legacy toolbar that is no
longer available.* This action might refer to a custom toolbar that was deleted from or
renamed in the current database.* This action might refer to a custom toolbar that exists in
a different database.@@1@1@6458@1
2095
Application-defined or object-defined error
2096
Application-defined or object-defined error
2097
The table for which you tried to create an import/export specification was created in an earlier
version of Microsoft Office Access.@To convert this database to the current version of
Microsoft Office Access, click the Microsoft Office Button, and then click 'Convert'.@@1@@@1
2098
The operation could not be completed because the Smart Tag '|' is not recognized by your
system.@@@1@@@1
2100
The control or subform control is too large for this location.@The number you entered for the
Left, Top, Height, or Width property is too large or is a negative number.@Reduce the size of
the control or subform control, or enter a positive number.@1@@@1
2101
The setting you entered isn't valid for this property.@To see the valid settings for this
property, search the Help index for the name of the property.@@1@@@1
2102
The form name '|' is misspelled or refers to a form that doesn't exist.@If the invalid form
name is in a macro, an Action Failed dialog box will display the macro name and the macro's
arguments after you click OK. Open the Macro window, and enter the correct form
name.@@1@@@1
2103
The report name '|' you entered in either the property sheet or macro is misspelled or refers
to a report that doesn't exist.@If the invalid report name is in a macro, an Action Failed dialog
box will display the macro name and the macro's arguments after you click OK. Open the
Macro window, and enter the correct report name.@@1@@@1
2104
You entered the control name '|,' which is already in use.@You already have a control on the
form with this name, or an existing control has its name mapped to this name for Visual
Basic.Visual Basic maps spaces in control names to underscores. For example, My Control
and My_Control are treated as duplicate names.@@1@1@11734@1
2105
You can't go to the specified record.@You may be at the end of a recordset.@@1@@@1
2106
| errors occurred when you loaded the form or report.@You loaded a form or report that has
controls or properties that Microsoft Office Access doesn't recognize and will
ignore.@@1@@@1
2107
The value you entered does not meet the validation rule defined for the field or control.@To
see the validation rule, switch to Design view, click the appropriate field, and then, if the
property sheet is not open, press F4. Then, click the Data tab in the property sheet.@Enter a
value that meets the validation rule, or press ESC to undo your changes.@1@1@11730@1
2108
You must save the field before you execute the GoToControl action, the GoToControl method,
or the SetFocus method.@You tried to move the focus to another control using the SetFocus
method, GoToControl action, or the GoToControl method.@Set the macro or method to the
AfterUpdate property instead of the BeforeUpdate property so it saves the field before
changing the focus.@1@1@6314@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 7 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2109
There is no field named '|' in the current record.@@@1@@@1
2110
Microsoft Office Access can't move the focus to the control |.@* The control may be a type
that can't receive the focus, such as a label.* The control's Visible property may be set to
No.* The control's Enabled property may be set to No.@@1@1@3016@1
2111
The changes you made can't be saved.@The save operation may have failed due to the
temporary locking of the records by another user.* Click OK to try again. You may need to
click OK several times (or wait until the other user closes the table).* Click Cancel if
repeated attempts to save your changes fail.@@3@@@1
2112
The item on the Clipboard can't be pasted into this control.@@@1@@@1
2113
The value you entered isn't valid for this field.@For example, you may have entered text in a
numeric field or a number that is larger than the FieldSize setting permits.@@1@@@1
2114
Microsoft Office Access doesn't support the format of the file '|,' or file is too large. Try
converting the file to BMP format.@@@1@@@1
2115
The macro or function set to the BeforeUpdate or ValidationRule property for this field is
preventing Microsoft Office Access from saving the data in the field.@* If this is a macro, open
the macro in the Macro window and remove the action that forces a save (for example,
GoToControl).* If the macro includes a SetValue action, set the macro to the AfterUpdate
property of the control instead.* If this is a function, redefine the function in the Module
window.@@1@@@1
2116
The value violates the validation rule for the field or record.@For example, you might have
changed a validation rule without verifying whether the existing data matches the new
validation rule.@Click Undo to restore the previous value, or enter a new value that meets the
validation rule for the field or record.@2@1@9121@1
2117
Microsoft Office Access has canceled the Paste operation.@The text on the Clipboard is too
long to paste into the form. For example, you may have pasted too much text into a label or
entered too much text in the ColumnWidths property.@Paste smaller sections. For labels, you
must paste fewer than 2,048 characters.@1@@@1
2118
You must save the current field before you run the Requery action.@* If you are running a
macro from the Navigation Pane, save the field first, and then run the macro.* If the macro
name is the setting of the BeforeUpdate property in a Visual Basic function, set the
AfterUpdate property to the name of the macro instead.@@1@1@3033@1
2119
The Requery action can't be used on the control '|.'@Certain controls, such as labels and
rectangles, can't receive the focus; therefore, you can't apply a Requery action to
them.@@1@1@3033@1
2120
To create a form, report or data access page using this wizard, you must first select the table
or query on which the form, report or data access page will be based.@@@1@@@1
2121
Microsoft Office Access can't open the form '|.'@It contains data that Microsoft Office Access
doesn't recognize.Re-create the form or, if you maintain backup copies of your database,
retrieve a copy of the form.@@1@@@1
2122
You can't view a form as a continuous form if it contains a subform, an ActiveX control, or a
bound chart.@Set the DefaultView property of the form to Single Form, Datasheet, PivotTable,
or PivotChart.@@1@@@1
2123
The control name you entered doesn't follow Microsoft Office Access object-naming
rules.@@@2@1@11734@1
2124
The form name you entered doesn't follow Microsoft Office Access object-naming
rules.@@@2@1@11734@1
2125
The setting for the FontSize property must be from 1 through 127.@@@1@1@12551@1
2126
The setting for the ColumnCount property must be from 1 through 255.@@@1@1@936@1
2127
The setting for the BoundColumn property can't be greater than the setting for the
ColumnCount property.@@@1@1@839@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 8 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2128
Microsoft Office Access encountered errors while importing |1.@For more detailed error
information, see the file '|2'.@@1@@@1
2129
The setting for the DefaultEditing property must be Allow Edits, Read Only, Data Entry, or
Can't Add Records.@Enter 1, 2, 3, or 4 for the DefaultEditing property.@@1@@@1
2130
The settings for the GridX and GridY properties must be from 1 through 64.@@@1@@@1
2131
An expression can't be longer than 2,048 characters.@@@1@@@1
2132
The setting for the DecimalPlaces property must be from 0 through 15, or 255 for Auto
(default).@@@1@@@1
2133
You can't place a form (or report) within itself.@Select or enter a different form or report to
serve as the subform or subreport.@@1@@@1
2134
The setting for the Width property must be from 0 through 22 inches (55.87
cm).@@@1@@@1
2135
This property is read-only and can't be set.@@@1@@@1
2136
To set this property, open the form or report in Design view.@For more information on this
property, search the Help index for the name of the property.@@1@@@1
2137
You can't use Find or Replace now.@The fields are not searchable due to one of the
following:* The fields are controls (such as buttons or OLE objects).* The fields have no
data.* There are no fields to search.@@1@@@1
2138
You can't search the field for the specified value.@Resolve the error given in the previous error
message before you attempt to search again.@@1@@@1
2139
You can't replace the current value of the field with the replacement text.@Resolve any errors
before making further replacements.@@1@@@1
2140
Microsoft Office Access cannot save the change you made to the record in the Replace
operation for the reason shown in the previous message.@Click Undo or enter a new value in
the field.@@1@@@1
2141
Microsoft Office Access can't find the text you specified in the Find What box.@@@1@@@1
2142
The FindRecord action requires a Find What argument.@You tried to run a macro set to one of
the current field's properties, but you left the Find What argument blank.@When you click OK,
an Action Failed dialog box will display the macro name and the macro's arguments. In the
Macro window, enter text or an expression for the Find What argument, and try the Search
operation again.@1@1@3015@1
2143
You didn't specify search criteria with a FindRecord action.@In the Macro window, insert a
FindRecord action before the FindNext action.@@1@1@3015@1
2144
The setting for the ListRows property must be from 1 through 255.@@@1@1@4055@1
2145
The ColumnWidths property setting must be a value from 0 through 22 inches (55.87 cm) for
each column in a list box or a combo box.@If there is more than one column, separate the
numbers with either a semicolon or the list separator character. List separator characters are
defined in the Regional Settings section of Windows Control Panel.@@1@1@847@1
2146
Application-defined or object-defined error
2147
You must be in Design view to create or delete controls.@@@1@2@5054@1
2148
The number you used to refer to the form or report section is invalid.@Make sure that the
number is less than the number of sections in the form or report.@@1@@@1
2149
The constant you entered for the control type is invalid.@For a list of valid constants you can
use to create a control, click Help.@@2@1@10905@1
2150
This type of control can't contain other controls.@@@1@@@1
2151
The parent control can't contain the type of control you selected.@For example, you used the
CreateControl function to designate an option group as the parent of a text box.@@1@@@1
2152
You can set group levels for reports only, not for forms.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 9 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2153
You can't specify more than 10 group levels.@@@1@@@1
2154
You can't call this function when the Group, Sort, and Total Pane is open.@@@1@@@1
2155
Application-defined or object-defined error
2156
Application-defined or object-defined error
2157
The sum of the top margin, the bottom margin, the height of the page header, and the height
of the page footer is greater than the length of the page you are printing on.@@@1@@@1
2158
You can use the Print method and the report graphics methods (Circle, Line, PSet, and Scale)
only in an event procedure or a macro set to the OnPrint, the OnFormat, or the OnPage event
property.@@@1@1@10129@1
2159
There isn't enough memory to initialize the Print method or one of the report graphics
methods (Circle, Line, PSet, Scale).@Close unneeded programs and try again to print or
preview the report.For more information on freeing memory, search the Microsoft Windows
Help index for 'memory, troubleshooting'.@@1@@@1
2160
Microsoft Office Access couldn't create the graphic or text.@An error occurred while initializing
the Print method or one of the report graphics methods (Circle, Line, PSet, Scale).@Close
unneeded programs and try again to print or preview the report.For information on freeing
memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@1@@@1
2161
The text or expression you entered doesn't match the type of data you are searching
for.@Redefine the text or expression, or search in a different field.@@1@@@1
2162
A macro set to one of the current field's properties failed because of an error in a FindRecord
action argument.@In the Macro window, change the Search As Formatted argument to Yes. If
you want the argument setting to remain No, do all of the following:* Select No for the
Match Case argument.* Select Yes for the Only Current Field argument.* Make sure you
are searching in a bound control.@@2@1@3015@1
2163
The page number you used as an argument for the GoToPage action or method doesn't exist
in this form.@@@1@1@3017@1
2164
You can't disable a control while it has the focus.@@@1@2@5250@1
2165
You can't hide a control that has the focus.@@@1@@@1
2166
You can't lock a control while it has unsaved changes.@@@1@@@1
2167
This property is read-only and can't be modified.@@@1@@@1
2169
You can't save this record at this time.@Microsoft Office Access may have encountered an
error while trying to save a record.If you close this object now, the data changes you made
will be lost.Do you want to close the database object anyway?@@20@@@2
2170
There isn't enough memory to retrieve data for the list box.@Close unneeded programs. Then
close and reopen the active form, and click the list box again.For more information on
freeing memory, search the Microsoft Windows Help index for 'memory,
troubleshooting'.@@1@@@1
2171
You can't have more than seven nested subforms in a main form.@Remove the eigth nested
subform.@@1@@@1
2172
You can't use a pass-through query or a non-fixed-column crosstab query as a record source
for a subform or subreport.@Before you bind the subform or subreport to a crosstab query,
set the query's ColumnHeadings property.@@2@1@9979@1
2173
The control '|' the macro is attempting to search can't be searched.@Try one of the
following:* Add a GoToControl action before the FindRecord action.* For the FindRecord
action, change the Only Current Field action argument from Yes to No.* Change the focus to
a searchable control.@@2@1@3015@1
2174
You can't switch to a different view at this time.@Code was executing when you tried to switch
views.@If you are debugging code, you must end the debugging operation before switching
views.@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 10 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2175
There isn't enough free memory to continue the Search operation.@Close unneeded
programs. Then try the Search operation again.For more information on freeing memory,
search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@@3
2176
The setting for this property is too long.@You can enter up to either 255 or 2,048 characters
for this property, depending on the data type.@@1@@@1
2177
You can't insert a report into a form.@A report can be inserted only into a report.@@1@@@1
2178
You can't add another section now.@The maximum total height for all sections in a report,
including the section headers, is 200 inches (508 cm).@Remove or reduce the height of at
least one section, and then add the new section.@1@@@1
2181
You can't sort on a calculated field in a form.@You can sort on a calculated field only in a
query.@Create a calculated field in a query, sort the field, and then base the form on the
query.Because the query must execute before the form opens, the form will open more
slowly.@1@@@1
2182
You can't sort on this field.@@@1@@@1
2183
Microsoft Office Access can't create an object of the type requested.@You are trying either to
create a form from a report that has been saved as text, or to create a report from a saved
form.@@1@@@1
2184
The value you used for the TabIndex property isn't valid. The correct values are from 0
through |.@@@2@1@6348@1
2185
You can't reference a property or method for a control unless the control has the focus.@Try
one of the following:* Move the focus to the control before you reference the property. In
Visual Basic code, use the SetFocus method. In a macro, use the GoToControl action.*
Reference or set the property from a macro or event procedure that runs when the GotFocus
event for the control occurs.@@2@1@6215@1
2186
This property isn't available in Design view.@Switch to Form view to access this property, or
remove the reference to the property.@@1@@@1
2187
This property is available only in Design view.@@@1@@@1
2188
The object you attempted to load from text has an invalid value for the property '|1' on a
|2.@@@1@@@1
2189
The code contains a syntax error, or a Microsoft Office Access function you need is not
available.@If the syntax is correct, check the Control Wizards subkey or the Libraries key in
the Microsoft Office Access section of the Windows Registry to verify that the entries you need
are listed and available.@If the entries are correct, either you must correct the Microsoft
Office Access Utility Add-in, or the file acWzlib or this wizard has been disabled. To reenable
this wizard, run Microsoft Office Access or Microsoft Office Setup again to reinstall Microsoft
Office Access. Before you reinstall Microsoft Office Access, delete the Windows Registry keys
for the Microsoft Office Access Utility Add-in and acWzlib.@1@@@1
2190
This property has been replaced by a new property; use the new property
instead.@@@1@@@1
2191
You can't set the | property in print preview or after printing has started.@Try setting this
property in the OnOpen event.@@1@@@1
2192
The bitmap you specified is not in a device-independent bitmap (.dib) format.@You tried to set
the PictureData property of a form, report, button, or image control.@@1@@@1
2193
The left margin, right margin, or both margins are wider than the paper size specified in the
Print Setup dialog box.@@@1@@@1
2194
You can't set the PictureData property in Datasheet view.@To see the valid settings for this
property, search the Help index for 'PictureData property'.@@1@@@1
2195
The section name you entered doesn't follow Microsoft Office Access object-naming
rules.@@@2@1@11734@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 11 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2196
Microsoft Office Access can't retrieve the value of this property.@The property isn't available
from the view in which you're running the macro or Visual Basic code, or Microsoft Office
Access encountered an error while retrieving the value of the property.To see the valid
settings for this property, search the Help index for the name of the property.@@1@@@1
2197
You can't set a subform control's SourceObject property to a zero-length string if you're
displaying the main form in Form view.@You can set this property to a zero-length string from
Design view, Datasheet view, or Print Preview.@@1@@@1
2200
The number you entered is invalid.@@@1@@@1
2201
There was a problem retrieving printer information for the |1 on |2. The object may have been
sent to a printer that is unavailable.@@@@@@
2202
There are currently no printers installed on your computer. To use this feature, you must first
install a printer in Windows.@For more information about how to install a printer, search for
"install printer" in Windows Help.@@1@@@1
2203
The dynamic-link library Commdlg failed: error code '0x|'.@The printer driver for the selected
printer may be incorrectly installed.For information on selecting another printer or
reinstalling this printer from Microsoft Windows, search the Windows Help index for 'printer
setup'.@@1@@@1
2204
The default printer driver isn't set up correctly.@For information on setting a default printer,
search the Microsoft Windows Help index for 'default printer, setting'.@@1@@@1
2205
The default printer driver isn't set up correctly.@For information on setting a default printer,
search the Microsoft Windows Help index for 'default printer, setting'.@@1@@@1
2206
The page number you entered is invalid.@For example, it may be a negative number or an
invalid range, such as 6 to 3.@@1@@@1
2207
Microsoft Office Access can't print macros.@You tried to use the PrintOut action or method,
but the active object is a macro.@If you want to print an object other than a macro, use the
SelectObject action or method to select the desired object before you run the PrintOut
action.@1@1@3041@1
2210
Microsoft Office Access can't print or preview the page because the page size you selected is
larger than 22.75 inches.@@@1@@@1
2211
Microsoft Office Access can't print or preview the Debug window.@@@1@@@1
2212
Microsoft Office Access couldn't print your object.@Make sure that the specified printer is
available.For information on setting a default printer, search the Windows Help index for
'default printer, setting'.@@1@@@1
2213
There was a problem retrieving printer information for this object. The object may have been
sent to a printer that is unavailable.@@@1@@@1
2214
There was a problem retrieving information from the printer. New printer has not been
set.@@@1@@@1
2215
Microsoft Office Access cannot print this PivotTable because its |1 exceed(s) 22.75
inches.@Reduce the |1 by making changes to the formatting or included data of the PivotTable
view, and then try to print again.@@1@@@1
2220
Microsoft Office Access can't open the file '|'.@@@1@@@1
2221
The text is too long to be edited.@@@1@@@1
2222
This control is read-only and can't be modified.@@@1@@@1
2223
The file name '|' is too long.@Enter a file name that's 256 characters or less.@@1@@@1
2225
Microsoft Office Access couldn't open the Clipboard.@The Clipboard isn't responding, probably
because another application is using it. Close all other applications and try the operation
again.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 12 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2226
The Clipboard isn't responding, so Microsoft Office Access can't paste the Clipboard's
contents.@* Another application may be using the Clipboard.* There may not be enough
free memory for the paste operation.Close all other applications, and then copy and paste
again.@@1@@@1
2227
The data on the Clipboard is damaged, so Microsoft Office Access can't paste it.@There may
be an error in the Clipboard, or there may not be enough free memory. Try the operation
again.@@1@@@1
2229
Microsoft Office Access can't start the OLE server.@You tried to use a form, report, or
datasheet that contains an OLE object, but the OLE server (the application used to create the
object) may not be registered properly. Reinstall the OLE server to register it
correctly.@@1@@@1
2234
Microsoft Office Access can't paste the OLE object.@@@1@@@1
2237
The text you entered isn't an item in the list.@Select an item from the list, or enter text that
matches one of the listed items.@@1@@@1
2239
Microsoft Office Access has detected that this database is in an inconsistent state, and cannot
attempt to recover the database because the file is read-only. To allow Access to recover the
database, close the database and set the file to read/write, and then open the
database.@@@1@@@1
2243
The data in the Clipboard isn't recognizable; Microsoft Office Access can't paste the OLE
object.@@@1@@@1
2244
The file name you specified in the Picture property for a command button or toggle button
can't be read.@* The file you specified may be corrupted. Restore the file from a backup copy
or re-create the file.* The disk where the file is located may be unreadable.@@1@@@1
2245
The file you specified doesn't contain valid icon data.@Specify a valid icon file.@@1@1@829@1
2246
Application-defined or object-defined error
2260
An error occurred while sending data to the OLE server (the application used to create the
object).@* You may have tried to send too much data. If you're creating a chart and the chart
is based on a query, modify the query so that it selects less data. If the chart is based on a
table, consider basing it on a query instead so that you can limit the data.* You may be
using an OLE server that doesn't accept the Clipboard format.* You may not be able to start
the OLE server because it's not properly registered. Reinstall it to register it.* Your computer
may be low on memory. Close other application windows to free up
memory.@@1@1@8951@1
2262
This value must be a number.@@@1@@@1
2263
The number is too large.@@@1@@@1
2264
Microsoft Office Access didn't recognize the unit of measurement.@Type a valid unit, such as
inches (in) or centimeters (cm).@@1@@@1
2265
You must specify a unit of measurement, such as inches (in) or centimeters
(cm).@@@1@@@1
2266
'|' may not be a valid setting for the RowSourceType property, or there was a compile error in
the function.@For information on valid settings for the RowSourceType property, click
Help.@@2@1@3853@1
2267
There is not enough disk space to create a temporary buffer file for printing.@Free up some
disk space to make room for the temporary buffer file.@@1@@@1
2269
Some library databases couldn't be loaded because too many were specified.@To change
library database references, click References on the Tools menu.@@1@1@9017@1
2272
The setting for the Update Retry Interval must be from 0 through 1,000
milliseconds.@@@1@@@1
2273
The setting for Update Retries must be from 0 through 10.@@@1@@@1
2274
The database '|' is already open as a library database.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 13 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2275
The string returned by the builder was too long.@The result will be truncated.@@1@@@1
2276
The custom builder you're using caused an error by changing the focus to a different window
while you were using it.@Enter a value without using the custom builder.@@1@@@1
2277
There was a font initialization error.@@@1@@@1
2278
Microsoft Office Access can't save your changes to this bound OLE object.@Either you don't
have permission to write to the record in which the object is stored, or the record is locked by
another user.Copy the object to the Clipboard (select the object and click Copy on the Edit
menu), and click Undo Current Record on the Edit menu. Then open the application you used
to create the object, paste the object from the Clipboard, and save it.@@1@1@10222@1
2279
The value you entered isn't appropriate for the input mask '|' specified for this
field.@@@2@1@9118@1
2280
You have added more output formats to the Windows Registry than Microsoft Office Access
can initialize.@Some output formats will not be available. Remove those formats that you
never or least often use.@@1@@@1
2281
Output format information is missing. There appears to be a problem with your Microsoft
Office Access installation. Please reinstall Microsoft Office Access or contact your system
administrator or help desk representative.@@@2@1@9015@1
2282
The format in which you are attempting to output the current object is not available.@Either
you are attempting to output the current object to a format that is not valid for its object type,
or the formats that enable you to output data as a Microsoft Excel, rich-text format, MS-DOS
text, or HTML file are missing from the Windows Registry. Run Setup to reinstall Microsoft
Office Access or, if you're familiar with the settings in the Registry, try to correct them
yourself. For more information on the Registry, click Help.@@2@1@9015@1
2283
The format specification for '|' is invalid.@You can't save output data to a file in this format
until you correct the setting for the format in the Windows Registry. Run Setup to reinstall
Microsoft Office Access or, if you're familiar with the settings in the Registry, try to correct
them yourself. For more information on the Registry, click Help.@@2@1@9015@1
2284
Microsoft Office Access can't write to the file.@* The network may not be working. Wait until
the network is working, and then try again.* You may be out of memory. Close one or more
Microsoft Office Access windows, close other applications, and then try again.@@1@@@1
2285
Microsoft Office Access can't create the output file.@* You may be out of disk space on the
destination drive.* The network may not be working. Wait until the network is working, and
then try again.* You may be out of memory. Close one or more Microsoft Office Access
windows, close other applications, and then try again.@@1@@@1
2286
Microsoft Office Access can't close the file.@* The network may not be working. Wait until the
network is working, and then try again.* You may be out of memory. Close one or more
Microsoft Office Access windows, close other applications, and then try again.@@1@@@1
2287
Microsoft Office Access can't open the mail session.@Check your mail application to make sure
that it's working properly.@@1@@@1
2288
Microsoft Office Access can't load the '|' format.@The setting for this format in the Windows
Registry is incorrect. You can't save the output data to a file in this format until you correct the
setting in the Registry.@Run Setup to reinstall Microsoft Office Access or, if you're familiar with
the settings in the Registry, try to correct them yourself. For more information on the
Registry, click Help.@2@1@9015@1
2289
Microsoft Office Access can't output the module in the requested format.@@@1@@@1
2290
There were too many message recipients; the message was not sent.@@@1@@@1
2291
There are too many message attachments; the message was not sent.@@@1@@@1
2292
The message text is too long, so it was not sent.@@@1@@@1
2293
Microsoft Office Access can't send this e-mail message.@Before attempting to send an e-mail
message from Microsoft Office Access, resolve the problem identified in the previous message,
or configure your computer to send and receive e-mail messages.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 14 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2294
Microsoft Office Access can't attach the object; the message was not sent.@* The network
may not be working. Wait until the network is working, and then try again.* You may be out
of memory. Close one or more Microsoft Office Access windows, close other applications, and
then try again.@@1@@@1
2295
Unknown message recipient(s); the message was not sent.@@@1@@@1
2296
The password is invalid; the message wasn't sent.@@@1@@@1
2297
Microsoft Office Access can't open the mail session.@You may be out of memory. Close one or
more Microsoft Office Access windows, close other applications, and then try again. You may
also want to check your mail application to ensure that it's working properly.@@1@@@1
2298
Microsoft Office Access can't start the wizard, builder, or add-in.@* The library database
containing the wizard, builder, or add-in may not be installed. Point to Add-ins on the Tools
menu, and then click Add-in Manager to see if the library database is installed.* The wizard,
builder, or add-in code may not be compiled and Microsoft Office Access can't compile it.
There may be a syntax error in the code.* The key for the add-in in the Windows Registry
file may be incorrect.@@2@1@9015@1
2299
Microsoft Office Access can't open the Zoom box.@The Microsoft Office Access Utility add-in is
missing or was modified. Rerun Microsoft Office Access or Microsoft Office Setup to reinstall
Microsoft Office Access and the Microsoft Office Access Utility add-in.@@1@1@12620@1
2300
Microsoft Office Access can't output because there are too many controls selected that have
different styles, such as color and font.@Select fewer controls, and then try again.@@1@@@1
2301
There are not enough system resources to output the data.@Close one or more Microsoft
Office Access windows and close other applications. Then try to output the data
again.@@1@@@1
2302
Microsoft Office Access can't save the output data to the file you've selected.@* The file may
be open. If so, close it, and then save the output data to the file again.* If you are using a
template, check to make sure the template exists.* If the file isn't open, check to make sure
that you have enough free disk space.* Make sure that the file exists on the path
specified.* Check to make sure you have permission to write to the specified
folder.@@1@@@1
2303
Microsoft Office Access can't output data now.@* The network may not be working. Wait until
the network is working, and then try again.* You may be out of disk space. Free up disk
space and try again.@@1@@@1
2304
Microsoft Office Access can't save output data to the specified file.@Make sure that you have
enough free disk space on your destination drive.@@1@@@1
2305
There are too many columns to output, based on the limitation specified in the output format
or by Microsoft Office Access.@@@1@@@1
2306
There are too many rows to output, based on the limitation specified by the output format or
by Microsoft Office Access.@@@1@@@1
2307
Application-defined or object-defined error
2308
The file '|' already exists.@Do you want to replace the existing file?@@20@@@2
2309
There is an invalid add-in entry for '|.'@There is an error in the Windows Registry for this addin. Correct the setting and restart Microsoft Office Access. For information on the Registry,
click Help.@@2@1@9015@1
2311
There isn't enough memory to run the NotInList event procedure.@@@1@@@1
2312
The shortcut '|' must be re-created.@The file may be missing, damaged, or in an older format
that can't be read.@@1@@@1
2313
Microsoft Office Access can't find the shortcut databases '|1' or '|2.'@Re-create the shortcut
with the correct locations of the databases.@@2@1@9032@1
2314
Microsoft Office Access can't find the shortcut database '|.'@Re-create the shortcut with the
correct location of the database.@@2@1@9032@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 15 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2315
The input string is too long.@@@1@@@1
2316
This table or query can't be opened because it has no visible fields.@This can result if the table
or query has only system fields, and the Show System Objects option is off.@To turn on the
Show System Objects option, click Options on the Tools menu, click the View tab, and select
the System Objects check box.@1@@@1
2317
The database '|' can't be repaired or isn't a Microsoft Office Access database file.@@@1@@@1
2319
Application-defined or object-defined error
2320
Microsoft Office Access can't display the field for which you entered Where in the Total
row.@Clear the Show check box for that field. If you want this field to appear in the query's
results, add it to the design grid twice. For the field that will appear in the query's results,
don't specify Where in the Total row, and make sure the Show check box is
checked.@@1@@@1
2321
You can't set criteria before you add a field or expression to the Field row.@Either add a field
from the field list to the column and enter an expression, or delete the criteria.@@1@@@1
2322
You can't sort on the asterisk (*).@Because the asterisk represents all fields in the underlying
table or query, you can't sort on it.@Add the asterisk to the query design grid, along with the
specific fields you want to sort on. Clear the Show check box for the sorting fields, and then
specify a sort order.@1@@@1
2323
You can't specify criteria for the asterisk (*).@Because the asterisk represents all the fields in
the underlying table or query, you can't specify criteria for it.@Add the asterisk to the query
design grid, along with the field(s) you want to set criteria for, and then enter criteria for the
specific fields. In the query design grid, clear the Show check box for the criteria field(s),
before you run the query.@1@@@1
2324
You can't calculate totals on the asterisk (*).@Because the asterisk represents all the fields in
the table, you can't calculate totals on it.@Remove the asterisk from the query design grid.
Add the fields you want to use to the design grid, and then select the total you want to
calculate for specific fields.@1@2@11202@1
2325
The field name you entered exceeds the 64-character limit of the LinkMasterFields
property.@When you use the Relationships command (on the Database Tools tab, click
Relationships) to define a relationship between the tables underlying a form and subform,
Microsoft Office Access links the form and subform automatically and sets the LinkChildFields
and LinkMasterFields properties.@@1@1@3990@1
2326
You can't specify Group By, Expression, or Where in the Total row for this column.@Specify an
aggregate function, such as Sum or Count, for the field or expression you designate as the
Value in the crosstab query.For more information on aggregate functions, click
Help.@@2@1@9980@1
2327
You must enter Group By in the Total row for a field that has Column Heading in the Crosstab
row.@The values derived from the field or expression that you designate as the Column
Heading are used to group data in the crosstab query.@@1@1@9980@1
2328
You can't run an update query on the asterisk (*).@Because the asterisk represents all the
fields in the table, you can't update it.@Remove the asterisk from the query design grid. Add
the fields you want to update to the design grid.@1@1@10001@1
2329
To create a crosstab query, you must specify one or more Row Heading(s) options, one
Column Heading option, and one Value option.@@@1@1@9980@1
2330
Microsoft Office Access can't represent the join expression | in Design view.@* One or more
fields may have been deleted or renamed.* The name of one or more fields or tables
specified in the join expression may be misspelled.* The join may use an operator that isn't
supported in Design view, such as > or <.@@1@@@1
2331
You must enter Group By in the Total row for at least one of the Row Heading options you
enter in the Crosstab row.@@@1@1@9980@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 16 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2332
Microsoft Office Access can't match the fields you added using the asterisk (*) in the append
query.@Because the asterisk represents all the fields in the underlying table or query, you
can't append an asterisk to one field or expression, and you can't append a single field or
expression to an asterisk.@Append an asterisk to an asterisk (for example, a table to a table),
or append specific fields.@1@1@9999@1
2333
You must enter the name of the table you are creating or appending records to.@You tried to
define a make-table or append query without specifying a destination table.@@1@@@1
2334
Microsoft Office Access can't print '|' because it is an action query.@Because action queries
don't produce a recordset, you can't print a Datasheet view of them.Note that an
exclamation point (!) joined to a query icon in the Navigation Pane marks an action query.@To
print a Datasheet view of the records that will be selected by the query, display the query in
Design view, click the Datasheet button, and then click the Print button.@1@@@1
2335
You must specify the same number of fields when you set the LinkChildFields and
LinkMasterFields properties.@You entered a different number of fields for one property than
you did for the other.If you use the Relationships command (on the Database Tools tab, click
Relationships) to define a relationship between the tables underlying the form and subform,
Microsoft Office Access will link the form and subform automatically and then set the
LinkChildFields and LinkMasterFields properties.@@1@1@9086@1
2337
You can't specify criteria on the same field for which you entered Value in the Crosstab
row.@You tried to display a crosstab query after entering Value in the Crosstab row and
criteria in the Criteria row.@If you want this field to supply the cross-tabulated values in the
crosstab query, delete the entry in the Criteria row. If you want this to be a criteria field, leave
the Crosstab row blank.@1@1@9980@1
2338
Microsoft Office Access truncated the expression you entered.@The expression '|' exceeds the
1,024-character limit for the query design grid.@@1@@@1
2339
Microsoft Office Access can't create a temporary link.@You reached the limit for the number of
links in your database. Microsoft Office Access needs to create a temporary link in order to
import your ODBC table.@Remove all unneeded links or tables.@1@@@1
2340
The expression you entered exceeds the 1,024-character limit for the query design
grid.@@@1@@@1
2342
A RunSQL action requires an argument consisting of an SQL statement.@For example, an
action query that appends records starts with INSERT INTO. A data-definition query that
creates a table starts with CREATE TABLE.@@1@1@3698@1
2343
The value you entered exceeds the Alias property's 64-character limit.@@@1@1@6146@1
2344
For the TopValues property in the query property sheet, you must enter an integer greater
than zero.@@@1@@@1
2345
For the TopValues property in the query property sheet, you must enter a percentage from 1
through 100.@@@1@@@1
2346
For the TopValues property in the query property sheet, you must enter a number greater
than zero.@@@1@@@1
2347
Microsoft Office Access can't find the file name you entered for the DestinationDB property in
an action query's property sheet.@You may have misspelled the database file name, or the file
may have been deleted or renamed.@@1@1@6183@1
2348
You can't leave the Alias property blank.@@@1@1@6146@1
2349
For the TopValues property in the query property sheet, you must enter a number smaller
than 2,147,483,647.@@@1@@@1
2350
Microsoft Office Access can't save the query.@* The query is a pass-through query and can't
be represented as a simple SQL string. Save the query as a named query from the Query
Builder. When you close the Query Builder, Microsoft Office Access will fill the RecordSource or
RowSource property with the saved query name.* Make sure the query doesn't have an SQL
syntax error.@@1@1@4309@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 17 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2351
Microsoft Office Access can't represent an implicit VALUES clause in the query design
grid.@Edit this in SQL view.@@1@@@1
2352
You can't modify this query because it has been deleted or renamed by another
user.@@@1@@@1
2353
Bad query parameter '|'.@@@1@@@1
2354
This query or table has an expression that is failing to evaluate.
2355
You can select up to | values in a column filter for a multi-valued field. Remove some values,
and then try again.
2356
You cannot assign a multivalued or Attachment field to the Link Master Fields or Link Child
Fields properties.@@@1@@@1
2360
A field name is missing.@You have defined a data type or a description for a field without
specifying the field name.@Enter a name for the field, or delete the row.@1@@@1
2361
Microsoft Office Access can't save this table.@There are no fields in this table.@Define at least
one field by entering a field name and selecting a data type.@1@@@1
2362
You already have a field named '|.'@@@1@@@1
2363
Microsoft Office Access allows only one AutoNumber field per table.@Use the Number data
type for similar fields.@@1@@@1
2364
Microsoft Office Access can't open the table in Datasheet view.@@@1@@@1
2366
Microsoft Office Access was unable to save the field ordering. All other changes were saved
successfully.@Click the Microsoft Office Button, point to Manage, and then click Compact and
Repair Database.@@1@@@1
2370
Removing or changing the index for this field would require removal of the primary key.@If
you want to delete the primary key, select that field and click the Primary Key
button.@@1@@@1
2371
Microsoft Office Access can't create a primary key. Your changes weren't saved.@@@1@@@1
2372
The field name is not valid.@Make sure that the name doesn't contain a period (.),
exclamation point (!), bracket ([]), leading space, or non-printable character such as a
carriage return. If you have pasted the name from another application, try pressing ESC and
typing the name again.@@2@1@13793@1
2373
The setting for the FieldSize property must be from 0 through 255.@@@1@@@1
2374
You can't create an index or primary key on more than 10 fields.@@@1@@@1
2375
You can't paste beyond the end of a table.@You have attempted to paste fields beyond the
255th row in a table in Design view.@@1@@@1
2376
Microsoft Office Access can't create a primary key.@You have selected too many fields for a
multiple-field primary key.@@1@@@1
2377
Once you enter data in a table, you can't change the data type of any field to AutoNumber,
even if you haven't yet added data to that field.@Add a new field to the table, and define its
data type as AutoNumber. Microsoft Office Access then enters data in the AutoNumber field
automatically, numbering the records consecutively starting with 1.@@1@@@1
2378
This table is read-only.@Use a different name in the Save As dialog box to save your
changes.@@1@@@1
2379
You can't create a primary key on a field of this data type.@You can't define a primary key on
fields with an OLE Object, Memo, Attachment, or Multi-valued lookup field.@@1@@@1
2380
Microsoft Office Access can't create a primary key because no fields have been selected.@You
have selected a row with no fields defined.@Place the insertion point somewhere in the row of
the field you want to define as the primary key.@1@@@1
2381
Microsoft Office Access can't create a primary key because the field doesn't have a
name.@Name the field, and then define it as a primary key field.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 18 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2382
You can't switch to Datasheet view and you can't return to Design view.@Another user has
opened this table or a query, form, or report that is bound to this table.@@1@@@1
2383
Microsoft Office Access can't change the data type.@There isn't enough disk space or
memory.@@1@@@1
2384
You cannot change one field from an AutoNumber data type and add another AutoNumber
field at the same time.@Do the following:1. Delete the AutoNumber field you just added,
click the Microsoft Office Button, and then click Save.2. Add the new AutoNumber field, and
then save the table again.@@1@@@1
2385
Errors were encountered during the save operation. |@@@1@@@1
2386
Microsoft Office Access was unable to create the table.@@@1@@@1
2387
You can't delete the table '|'; it is participating in one or more relationships.@If you want to
delete this table, first delete its relationships in the Relationships window.@@1@@@1
2388
You can't change the primary key.@This table is the primary table in one or more
relationships.@If you want to change or remove the primary key, first delete the relationship
in the Relationships window.@1@@@1
2389
You can't delete the field '|.'@It is part of one or more relationships.@If you want to delete
this field, first delete its relationships in the Relationships window.@1@@@1
2390
You can't change the data type or field size of this field; it is part of one or more
relationships.@If you want to change the data type of this field, first delete its relationships in
the Relationships window.@@1@@@1
2391
Field '|1' doesn't exist in destination table '|2.'@Microsoft Office Access was unable to
complete the append operation. The destination table must contain the same fields as the
table you are pasting from.@@1@@@1
2392
You can't set the Unique property of a primary key to No.@A primary key, by definition,
contains only unique values.@If you want to allow nonunique values in this field, remove the
primary key definition by setting the Primary property to No.@1@@@1
2393
You can't set the IgnoreNulls property of a primary key to Yes.@A primary key, by definition,
can't allow null values.@If you want null values in this field, remove the primary key definition
by setting the Primary property to No.@1@@@1
2394
The index name is invalid.@The index name may be too long (over 64 characters) or contain
invalid characters.@@1@@@1
2395
Indexes must have names.@@@1@@@1
2396
Microsoft Office Access can't create an index or primary key.@One or more field names are
missing.@Enter or select at least one field in the Field Name column for each index you
name.@1@@@1
2397
You already have an index named '|.'@@@1@@@1
2398
The primary key has been changed.@This table is the primary table in one or more
relationships. Changes to the primary key won't be saved.@@1@@@1
2399
The setting for the FieldSize property must be from 1 through 8000.@@@1@@@1
2400
The row you inserted in the grid exceeds the limit of 255 rows (fields) for a table or 1,000
rows (actions) for a macro.@@@1@@@1
2401
You can't delete the '|1' column at this time. @The '|1' column is part of the primary key for
the '|2' table. It is used to identify and store the rows in your table in the database.@You
cannot delete a primary key while using Datasheet view. To delete the primary key, open the
table in Design view and remove the primary key field.@1@@@1
2420
The expression you entered has an invalid number.@@@2@1@11732@1
2421
The expression you entered has an invalid date value.@@@2@1@11729@1
2422
The expression you entered has an invalid string.@A string can be up to 2048 characters long,
including opening and closing quotation marks.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 19 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2423
The expression you entered has an invalid . (dot) or ! operator or invalid parentheses.@You
may have entered an invalid identifier or typed parentheses following the Null
constant.@@2@1@11736@1
2424
The expression you entered has a field, control, or property name that Microsoft Office Access
can't find.@@@1@@@1
2425
The expression you entered has a function name that Microsoft Office Access can't
find.@@@1@@@1
2426
The function you entered can't be used in this expression.@* You may have used a DoEvents,
LBound, UBound, Spc, or Tab function in an expression.* You may have used an aggregate
function, such as Count, in a design grid or in a calculated control or field.@@1@@@1
2427
You entered an expression that has no value.@The expression may refer to an object that has
no value, such as a form, a report, or a label control.@@1@@@1
2428
You entered an invalid argument in a domain aggregate function.@* A field in the string
expression may not be in the domain.* A field specified in the criteria expression may not be
in the domain.@@2@1@10931@1
2429
The In operator you entered requires parentheses.@@@1@@@1
2430
You did not enter the keyword And in the Between...And operator.@The correct syntax is as
follows:expression [Not] Between value1 And value2@@1@@@1
2431
The expression you entered contains invalid syntax.@You may have entered a comma without
a preceding value or identifier.@@1@@@1
2432
The expression you entered contains invalid syntax, or you need to enclose your text data in
quotes.@You may have entered an invalid comma or omitted quotation marks.For example,
if the Default Value property of a text field is ''Huey, Louie, and Dewey,'' it must be enclosed in
quotes if you mean it as a literal text string. This avoids the confusion with the expression
''Huey Louie'' And ''Dewey''.@@1@@@1
2433
The expression you entered contains invalid syntax.@You may have entered an operator, such
as the + operator, in an expression without a corresponding operand.@@1@@@1
2434
The expression you entered contains invalid syntax.@You may have entered an operand
without an operator.@@1@@@1
2435
The expression you entered has too many closing parentheses.@@@1@@@1
2436
The expression you entered is missing a closing parenthesis, bracket (]), or vertical bar
(|).@@@1@@@1
2437
The expression you entered has invalid vertical bars (|).@@@1@@@1
2438
The expression you entered contains invalid syntax.@You omitted an operand or operator, you
entered an invalid character or comma, or you entered text without surrounding it in quotation
marks.@@2@1@11732@1
2439
The expression you entered has a function containing the wrong number of
arguments.@@@1@@@1
2440
You must enclose IIf function arguments in parentheses.@@@1@3@1012957@1
2442
The expression you entered has invalid parentheses.@You may have used the parenthesis
syntax for an identifier in a query. Use the standard identifier
syntax:Forms![Form]![Control].@@1@1@11729@1
2443
You can use the Is operator only in an expression with Null or Not Null.@@@1@3@1008950@1
2445
The expression you entered is too complex.@@@2@1@11732@1
2446
There isn't enough memory available to perform this calculation.@Close unneeded programs,
and try again.For more information on freeing memory, search the Microsoft Windows Help
index for 'memory, troubleshooting'.@@1@@@1
2447
There is an invalid use of the . (dot) or ! operator or invalid parentheses.@You may have
entered an invalid identifier or typed parentheses following the Null
constant.@@2@1@11736@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 20 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2448
You can't assign a value to this object.@* The object may be a control on a read-only form.*
The object may be on a form that is open in Design view.* The value may be too large for
this field.@@1@1@9424@1
2449
There is an invalid method in an expression.@For example, you may have tried to use the
Print method with an object other than Report or Debug.@@2@4@2015551@1
2450
Microsoft Office Access can't find the form '|' referred to in a macro expression or Visual Basic
code.@* The form you referenced may be closed or may not exist in this database.*
Microsoft Office Access may have encountered a compile error in a Visual Basic module for the
form.@@1@1@11735@1
2451
The report name '|' you entered is misspelled or refers to a report that isn't open or doesn't
exist.@@@1@@@1
2452
The expression you entered has an invalid reference to the Parent property.@For example,
you may be using the Parent property with a control on a main form or report rather than with
a control on a subform or subreport.@@2@1@4852@1
2453
The control name '|' you entered in your expression is misspelled or refers to a control on a
form or report that isn't open or doesn't exist.@@@1@1@11730@1
2454
The object name '|' you entered following the ! operator in the expression is invalid.@For
example, you may have tried to enter an identifier with two control names separated by the !
operator.@@2@1@11736@1
2455
You entered an expression that has an invalid reference to the property |.@The property may
not exist or may not apply to the object you specified.@@2@4@2015567@1
2456
The number you used to refer to the form is invalid.@Use the Count property to count the
open forms and make sure that the form number is not greater than the number of open
forms minus one.@@1@4@2019460@1
2457
The number you used to refer to the report is invalid.@Use the Count property to count the
open reports and make sure that the report number is not greater than the number of open
reports.@@1@4@2019460@1
2458
The control number you specified is greater than the number of controls.@Use the Count
property to count the controls on the form or report and then check that the control number
you cite is within the range of existing controls.@@1@4@2019460@1
2459
You can't refer to the Parent property of a form or report when either is open in Design
view.@@@1@@@1
2460
You can't refer to the RecordsetClone property of a form open in Design
view.@@@1@1@7393@1
2461
Use a section number, not a string, to refer to a form or report section.@@@1@@@1
2462
The section number you entered is invalid.@@@1@@@1
2463
Use a number, not a string, to refer to a group level.@@@2@1@6361@1
2464
There is no sorting or grouping field or expression defined for the group level number you
used.@A valid group level number can be from 0 (for the first field or expression you sort or
group on) through 9 (for the tenth). Count the group levels in the report starting with
zero.@@1@@@1
2465
Microsoft Office Access can't find the field '|' referred to in your expression.@You may have
misspelled the field name, or the field may have been renamed or deleted.@@1@1@11730@1
2466
The expression you entered has an invalid reference to the Dynaset property.@For example,
you may have used the Dynaset property with a form that isn't based on a table or
query.@@1@@@1
2467
The expression you entered refers to an object that is closed or doesn't exist.@For example,
you may have assigned a form to a Form object variable, closed the form, and then referred
to the object variable.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 21 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2468
The value you entered for the interval, number, or date argument in the function is
invalid.@Check the argument to make sure that you entered it correctly.For more
information on valid argument values, search the Help index for 'DatePart function,' 'DateAdd
function,' or 'DateDiff function'.@@1@@@1
2469
The expression |2 you entered in the form control's ValidationRule property contains the error
|1.@Microsoft Office Access can't parse the ValidationRule expression you entered. For
example, if you enter the expression =MyFunction() in the ValidationRule property, and the
function MyFunction doesn't exist, Microsoft Office Access displays the following
message:Unknown function name in validation rule: 'MyFunction'.@To help you create
expressions as arguments in Visual Basic, use the Expression Builder. For more information,
search the Help index for 'Expression Builder'.@1@1@11805@1
2470
There is a(n) '|' in the form control's ValidationRule property.@To help you create expressions
as arguments in Visual Basic, use the Expression Builder. For more information, search the
Help index for 'Expression Builder'.@@1@1@11805@1
2471
The expression you entered as a query parameter produced this error: '|'@@@2@1@11805@1
2472
The LinkMasterFields property setting has produced this error: '|'@@@2@1@3990@1
2473
The expression |2 you entered as the event property setting produced the following error:
|1.@* The expression may not result in the name of a macro, the name of a user-defined
function, or [Event Procedure].* There may have been an error evaluating the function,
event, or macro.@@1@@@1
2474
The expression you entered requires the control to be in the active window.@Try one of the
following:* Open or select a form or report containing the control.* Create a new control
in the active window, and try the operation again.@@1@@@1
2475
You entered an expression that requires a form to be the active window.@@@1@2@5601@1
2476
You entered an expression that requires a report to be the active window.@@@1@2@5603@1
2477
You entered an invalid objecttype value '|' in an If TypeOf object Is objecttype condition of an
If...Then...Else statement.@The objecttype can be any one of the following:
BoundObjectFrame, CheckBox, ComboBox, CommandButton, Label, Line, ListBox,
UnboundObjectFrame, OptionButton, OptionGroup, PageBreak, Rectangle, Subform,
Subreport, TextBox, ToggleButton, ImageControl, or OLEControl.@@1@@@1
2478
Microsoft Office Access doesn't allow you to use this method in the current view.@Most
methods, including the SetFocus and Requery methods, can't be used in form or report Design
view.@@2@4@2015551@1
2479
The event procedure '|' can't be a Function procedure; it must be a Sub procedure.@If you
want to run a Function procedure when an event occurs, try one of the following:* Set the
event property to the name of a macro containing a RunCode action that runs the Function
procedure.* Set the event property to =FunctionName().@@1@@@1
2480
You referred to a property by a numeric argument that isn't one of the property numbers in
the collection.@Check the property numbers in the collection.@@1@@@1
2481
You can't set a value while a document is in Print Preview.@@@1@@@1
2482
Microsoft Office Access can't find the name '|' you entered in the expression.@You may have
specified a control that wasn't on the current object without specifying the correct form or
report context.@To refer to a control on another form or report, precede the control name
with the name of a collection, usually either Forms or Reports, and the name of the form or
report to which the control belongs.For example, Forms![Products]![Units In
Stock].@1@@@1
2483
You can't move to a previous control when only one control has had the focus.@Use the
PreviousControl property only after you've moved the focus to a second
control.@@1@1@7144@1
2484
There is no active datasheet.@@@1@@@1
2485
Microsoft Office Access can't find the object '|.'@If '|' is a new macro or macro group, make
sure you have saved it and that you have typed its name correctly.@@1@1@10183@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 22 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2486
You can't carry out this action at the present time.@You tried to run a macro or used the
DoCmd object in Visual Basic to carry out an action. However, Microsoft Office Access is
performing another activity that prevents this action from being carried out now.For
example, no actions on a form can be carried out while Microsoft Office Access is repainting a
control or calculating an expression.@Carry out the action later.@1@@@1
2487
The Object Type argument for the action or method is blank or invalid.@* For a Close,
GoToRecord, SearchForRecord or RepaintObject action, enter values for both arguments, or
leave both blank to perform the action on the active object.* For a DeleteObject, Rename,
or CopyObject action, enter values for both arguments, or leave both blank to perform the
action on the object currently selected in the Navigation Pane.* For a SendObject or
OutputTo action, enter values for both arguments, or leave the Object Name argument blank
if you want the action performed on the active object of the specified object type.* If you're
using a method with the DoCmd object, use an intrinsic constant that equates to a valid object
type or the corresponding numeric value for the argument name.@@1@1@12276@1
2488
You can't use the ApplyFilter action on this window.@* You tried to use the ApplyFilter action
or method, but you didn't apply the filter to a table, query, form, or report.* You may have
applied the filter to a form, but the form wasn't open in Form or Datasheet view.* You may
have applied the filter to a report but didn't use the ApplyFilter action in a macro specified by
the OnOpen property setting.@Use the SelectObject action or method to select the table,
query, form, or report before applying the filter.@1@1@3041@1
2489
The object '|' isn't open.@* The macro you are running (directly or indirectly) contains a
GoToRecord, RepaintObject, or SelectObject action, but the Object Name argument names an
object that is closed.* The objectname argument for the GoToRecord, RepaintObject, or
SelectObject method names an object that is closed.@Use one of the Open actions or
methods to open the object so that you can carry out the desired action.@1@@@1
2491
The action or method is invalid because the form or report isn't bound to a table or
query.@You tried to use the ApplyFilter or SearchForRecord action or method. However, the
form or report you applied the filter to is not based on a table or query, so the form or report
doesn't have any records to apply a filter to.@Use the SelectObject action or method to select
the desired form or report before you run the ApplyFilter action.To base a form or report on
a table or query, open the form or report in Design view, and enter the table or query name in
the RecordSource property.@1@1@3041@1
2492
Microsoft Office Access can't find the macro '|2' in the macro group '|1.'@You used the
macrogroupname.macroname syntax to specify a macro. You then tried to run the macro
(directly or indirectly), or you used the RunMacro method to run the macro. However, the
macro you specified isn't in this macro group.@Create the macro in the macro group, specify
the correct macro group, or specify the correct macro name.@1@1@11313@1
2493
This action requires an Object Name argument.@@@1@@@1
2494
The action or method requires a Form Name argument.@You tried to use the OpenForm action
or method, but you left the Form Name argument blank.@In the Form Name argument, enter
the name of a form in the current database.@1@1@11313@1
2495
The action or method requires a Table Name argument.@You tried to use the OpenTable,
TransferSpreadsheet, or TransferText action or method, but you left the Table Name argument
blank.@In the Table Name argument, enter the name of a table that is in the current
database.@1@@@1
2496
The action or method requires a Query Name argument.@You tried to use the OpenQuery
action or method, but you left the Query Name argument blank.@In the Query Name
argument, enter a query name.@1@@@1
2497
The action or method requires a Report Name argument.@You tried to use the OpenReport
action or method, but you left the Report Name argument blank.@In the Report Name
argument, enter the name of a report.@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 23 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2498
An expression you entered is the wrong data type for one of the arguments.@You tried to run
a macro or use a method to carry out an action, but an expression evaluated to the wrong
data type.For example, for the Close method you specified a string for the Object Type
argument, but this argument can be set only to certain intrinsic constants or their numeric
equivalents.@@1@@@1
2499
You can't use the GoToRecord or SearchForRecord action or method on an object in Design
view.@Try one of the following:* Switch to Form or Datasheet view for a form.* Switch to
Datasheet view for a query or table.* If you are running a macro or Visual Basic procedure
containing an action that opens the object, set the View argument to the correct view before
you carry out the GoToRecord action.@@2@1@3018@1
2500
You must enter a number greater than zero for a Repeat Count argument.@You tried to use
the RunMacro action or method, but you entered a value less than zero (or an expression that
evaluates to less than zero) in the Repeat Count argument.@To run the macro once, leave
this argument blank.@1@@@1
2501
The | action was canceled.@You used a method of the DoCmd object to carry out an action in
Visual Basic, but then clicked Cancel in a dialog box.For example, you used the Close
method to close a changed form, then clicked Cancel in the dialog box that asks if you want to
save the changes you made to the form.@@1@@@1
2502
The action or method requires a Macro Name argument.@* You tried to use the RunMacro
action or method, but you left the Macro Name argument blank.* Microsoft Office Access
tried to create a custom menu bar for a form or report, but the Menu Macro Name argument
of the AddMenu action is blank.@In the Menu Macro Name argument, enter the name of a
macro or macro group that is in the current database.@1@@@1
2503
You can't use this action with the DoCmd object.@For a list of the actions that the DoCmd
object doesn't support and some alternatives to using these actions, click Help.Any actions
that aren't in this list can be used with the DoCmd object.@@2@1@11313@1
2504
The action or method requires at least | argument(s).@You tried to run a macro containing an
action or used a method or action with the DoCmd object, but you didn't set the required
number of arguments.For example, if you use the MoveSize action, you must set at least
one of the four arguments.@@1@1@11313@1
2505
An expression in argument | has an invalid value.@You tried to run a macro or used the
DoCmd object in Visual Basic. The argument number above is the position of the argument as
it appears in the Macro window, the Action Failed dialog box, or the Object Browser (if you're
using the DoCmd object).@Try one of the following:* Select a setting from the drop-down
list box in each argument.* Use an intrinsic constant equating to a valid object type.*
Substitute the correct corresponding expression.@1@1@11895@1
2506
A value you entered for the Transfer Type argument is invalid.@An expression in the Transfer
Type argument doesn't evaluate to a valid numeric value.@Valid values for the Transfer Type
argument are as follows:* 0, 1, and 2 for the TransferDatabase action.* 0, 1, and 2 for the
TransferSpreadsheet action.* 0 through 6 for the TransferText action.@1@1@11313@1
2507
The | type isn't an installed database type or doesn't support the operation you chose.@You
used the TransferDatabase method, but an expression in the databasetype argument doesn't
evaluate to a valid database type for importing, exporting, or linking.For information on valid
database types, click Help.@@2@1@4780@1
2508
A value you entered for the spreadsheettype argument is invalid.@You used the
TransferSpreadsheet method, and an expression in the spreadsheettype argument doesn't
evaluate to a valid numeric value.@Valid values are 0, 2, 3, 4, 5, 6, 7, and 8. Note that 1 is an
invalid value; you can't import or export to a Lotus .wks format file.@1@1@4781@1
2509
The setting for the Range argument can't be longer than 255 characters.@@@1@1@4781@1
2510
The expression you entered in the Specification Name argument exceeds the 64-character
limit.@Select one of the existing specification names from the argument list box when you use
the TransferText action in a macro, or enter a name in Visual Basic that follows Microsoft
Office Access object-naming rules.@@2@1@11734@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 24 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2511
The action or method requires a Specification Name argument.@You tried to use the
TransferText action or method and you specified a Transfer Type argument but left the
Specification Name argument blank.@In the Specification Name argument, enter an existing
specification name from the argument list box.@1@1@11313@1
2512
Microsoft Office Access can't parse the expression: '|'.@Click OK to return to the action
argument or conditional expression where this expression appears, and then correct the
syntax.@@1@@@1
2513
The Macro Name argument can't be longer than 64 characters according to Microsoft Office
Access object-naming rules.@@@1@1@11734@1
2514
The action or method requires a Control Name argument.@You tried to use the GoToControl
action or method, but you left the control name blank.@In the Control Name argument, enter
a control or field name from the active form or datasheet.@1@1@11313@1
2515
Microsoft Office Access can't open the macro '|' because it was saved using a different version
of Microsoft Office Access.@Re-create the macro in the current version of Microsoft Office
Access.@@1@@@1
2516
Microsoft Office Access can't find the module '|.'@You tried to use the OpenModule action or
method, but Microsoft Office Access can't find the module you specified in the Module Name
argument.@Enter a valid module name from the current database.@1@@@1
2517
Microsoft Office Access can't find the procedure '|.'@* You may have used the Run method in
Visual Basic but entered an invalid procedure name, or you used the Run method without first
opening a database.* You tried to use the OpenModule action or method, but you used an
invalid procedure name.@@1@@@1
2519
Application-defined or object-defined error
2520
The action or method requires a Module or Procedure Name argument.@You tried to use the
OpenModule action or method, but you didn't enter a name in either the Module Name or the
Procedure Name argument in the Macro window.@Enter a valid name in one of these
arguments.@1@@@1
2521
You have specified a Transfer Type that doesn't support the HTML Table Name
argument.@Leave the HTML Table Name argument blank unless you are using the Import
HTML or Link HTML Transfer Types.@@1@@@1
2522
The action or method requires a File Name argument.@You tried to use the
TransferSpreadsheet or TransferText action or method.@In the File Name argument, enter a
file name.@1@1@11313@1
2523
The value you entered for the show argument is invalid.@You used the ShowToolbar
method.@Valid values for this argument are acToolbarYes, acToolbarWhereApprop, and
acToolbarNo, or the corresponding numeric values 0, 1, and 2.@1@1@12446@1
2524
Microsoft Office Access can't invoke the application using the RunApp action.@The path to the
application is invalid, or a component of the application is missing.@Check the path in
Windows Explorer or File Manager.@1@@@1
2525
A macro can call itself a maximum of 20 times.@Your macro contains a RunMacro action that
calls the same macro more than 20 times.@Use a condition to stop the macro after it has
been run 20 times, or call another macro with the RunMacro action.@1@@@1
2526
The SendKeys action requires the Microsoft Office Access Utility Add-in to be loaded.@Rerun
Microsoft Office Access or Microsoft Office Setup to reinstall Microsoft Office Access and the
Microsoft Office Access Utility Add-in.@@1@@185309@1
2527
Lotus .wks file formats aren't supported in the current version of Microsoft Office
Access.@Convert your .wks file to a more recent format, such as .wk1.@@1@@@1
2528
The RunCommand macro action argument is missing, or you entered an invalid command ID
for the RunCommand method.@@@1@@@1
2529
The Toolbar argument can't be longer than 64 characters.@@@1@@@1
2530
The SelectObject method can't be used on a report that is currently printing.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 25 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2531
Your HTML file does not contain any tabular data that Microsoft Office Access can
import.@.@@1@@@1
2532
Microsoft Office Access can't find the macro or sub procedure '|.'@The specified macro, macro
group, or sub procedure doesn't exist.@Note that when you enter the
macrogroupname.macroname syntax in an argument, you must specify the name the macro's
macro group was last saved under. Also, ensure that the referenced macro has been saved,
or that the referenced sub procedure expects 0 arguments.@1@@@1
2533
The ApplyFilter action requires that either the Filter Name or Where Condition argument is
set.@You tried to run a macro containing an ApplyFilter action, but you didn't set the required
arguments.@@1@1@11313@1
2534
The action or method requires a data access page Name argument.@You tried to use the
OpenDataAccessPage action or method, but you left the data access page Name argument
blank.@In the data access page Name argument, enter the name of a data access page in the
current database.@1@1@11313@1
2535
The ApplyFilter action contains a Filter Name that cannot be applied.@The filter name is not a
valid argument in the ApplyFilter action in Client Server.@@1@1@11313@1
2536
Application-defined or object-defined error
2537
The feature '|' is not available while the database is opened in disabled mode.@@@1@@@1
2538
The '|' macro action cannot be run in disabled mode.@@@1@@@1
2540
The file '|' you tried to replace is a Microsoft Office Access system file that is in use and can't
be replaced or deleted.@@@1@@@1
2541
The contents of the Clipboard have been deleted and can't be pasted.@Some applications do
not put large objects on the Clipboard. Instead, they put a pointer to the object on the
Clipboard. The pointer may vanish before the paste happens.@@1@@@1
2542
Specify the database name in the command line so that Microsoft Office Access can find the
macro.@@@1@@@1
2543
You can't paste a database object onto itself.@@@1@@@1
2544
Application-defined or object-defined error
2545
The CopyObject action requires you to specify a different destination database or a new name
to copy from the current database.@The macro you are running includes a CopyObject
action.@Open the macro in the Macro window, and select the CopyObject action. Enter a
destination database or a new name in the appropriate argument box.@1@1@3009@1
2546
Select a database object in the Navigation Pane before you run the macro containing the |
action.@@@2@1@3009@1
2547
The database '|' you tried to delete and replace is read-only and can't be deleted or
replaced.@Enter a different name for the new database.@@1@@@1
2548
Microsoft Office Access can't run the Security Wizard because this database is open in
exclusive mode.@Do you want Microsoft Office Access to open the database in shared mode
and run the Security Wizard?@@19@@@2
2549
Microsoft Office Access can't delete |1 after compacting it. The compacted database has been
named |2.@If you compact a database using the same name, Microsoft Office Access creates
a new compacted database and then deletes the original database.In this case, however,
the original database wasn't deleted because it is read-only.@If you can, remove the readonly status, delete the original database, and then rename the new database using the
original name.If you can't remove the read-only status, inform your workgroup
administrator.@1@1@10299@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 26 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2550
Microsoft Office Access can't delete |1 after encoding it. The encoded database has been
named |2.@If you encode a database using the same name, Microsoft Office Access creates a
new encoded database, and then deletes the original database.In this case, however, the
original database can't be deleted because it is read-only.@If you can, remove the read-only
status, delete the original database, and then rename the new database using the original
name.If you can't remove the read-only status, inform your workgroup
administrator.@1@1@10299@1
2551
Microsoft Office Access can't delete |1 after decoding it. The decoded database has been
named |2.@If you decode a database using the same name, Microsoft Office Access creates a
new decoded database, and then deletes the original database.In this case, however, the
original database can't be deleted because it is read-only.@If you can, remove the read-only
status, delete the original database, and then rename the new database using the original
name.If you can't remove the read-only status, inform your workgroup
administrator.@1@1@10299@1
2552
You can't encode a database that you didn't create or don't own.@See the owner of the
database or your workgroup administrator.@@1@@@1
2553
You can't decode a database that you didn't create or don't own.@See the owner of the
database or your workgroup administrator.@@1@@@1
2554
Can't find the database you specified, or you didn't specify a database at all.@Specify a valid
database name in the command line, and include a path if necessary.@@1@1@10283@1
2556
Microsoft Office Access can't run the Security Wizard because the database uses a
password.@Remove the database password by clicking Unset Database Password in the
Database Tools group on the Database Tools tab.@@1@@@1
2557
The database you tried to convert was either created in or was already converted to the
requested version of Microsoft Office Access.@@@1@@@1
2558
Application-defined or object-defined error
2559
Microsoft Office Access was unable to refresh the linked table '|1' in database '|2' during
conversion. Try to refresh the links manually by using the Linked Table Manager command in
the Database Tools group on the Database Tools tab.
2560
Microsoft Office Access is unable to load the Database Properties.@@@1@@@3
2561
Microsoft Office Access can't display the Database Properties dialog box.@@@1@@@1
2562
Microsoft Office Access is unable to save the Database Properties.@@@1@@@1
2563
Application-defined or object-defined error
2564
You can't hide the document '|' while it is open.@Close the database object first, and then
hide it.@@1@@@1
2565
You can't unhide the database object '|' while it is open.@Close the database object first, and
then unhide it.@@1@@@1
2566
Microsoft Office Access is unable to set the application's icon to the file '|'.@Make sure the file
is a valid icon (.ico) file. If you're using Microsoft Windows, you can also use .bmp
files.@@1@@@1
2567
Microsoft Office Access can't open or convert this previous version database.@The database
was created in an earlier version of Microsoft Office Access. You don't have appropriate
security permissions to open or convert databases created in earlier versions.@@1@@@1
2568
Microsoft Office Access can't undo this operation.@An object with the same name already
exists. Another user might have created an object named '|' after you had performed this
operation on an object with the same name.@@1@@@1
2569
Application-defined or object-defined error
2570
Application-defined or object-defined error
2571
You cannot modify objects created in an earlier version of Microsoft Office Access.@To convert
this database to the current version of Microsoft Office Access, close the database, click the
Microsoft Office Button, and then click Convert.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 27 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2572
This database is in an unexpected state and Microsoft Office Access cannot open it.@This
database has been converted from a prior version of Microsoft Office Access by using the DAO
CompactDatabase method instead of the Convert Database command (click the Microsoft
Office Button and then click Convert). Converting by using the DAO CompactDatabase method
has left the database in a partially converted state.@If you have a copy of the database in its
original format, click the Microsoft Office Button and then click Convert to convert it. If the
original database is no longer available, create a new database and import your tables and
queries to preserve your data and try again. Your other database objects cannot be
recovered.@1@@@1
2573
This database is a replica created in a different version of Access. @You can only convert this
replica by synchronizing with its Design Master. @Convert the Design Master of this replica set
then synchronize the replica with the Design Master.@1@@@1
2574
You can't create another Microsoft Office Access database with the same name and location as
an existing database.@You carried out the Make MDE File command, but tried to give the new
database the same extension as the old one.@Accept the default .mde extension for your new
MDE database.@1@@@1
2575
You can't create a Microsoft Office Access MDE database from a database
replica.@@@1@@@1
2576
This database is a Microsoft Office Access 7.0/8.0/9.0 Design Master/Replica.@If you click OK,
the database you selected will be renamed to |1 and then converted to |2. Everyone using a
replica of this database will have to upgrade to Microsoft Access 2000 after the next
synchronization.@@4@@@2
2577
The database | is already open.@Close the database before carrying out the Make MDE File
command.@@1@@@1
2578
Microsoft Office Access was unable to create the .accde, .mde, or .ade file.@@@1@@@1
2579
Local forms, reports, macros, and modules in this replica will not be converted. @To retain
these objects, please be sure to import them into the Design Master from the original
replica.@@1@@@1
2580
The record source '|' specified on this form or report does not exist. @The name of the
recordsource may be misspelled, the recordsource was deleted or renamed, or the
recordsource exists in a different database.@In the Form or Report's Design view, display the
property sheet by clicking the Properties button, and then set the RecordSource property to an
existing table or query. @1@@@1
2581
You must define a sort field or expression for the group header or footer in the report you tried
to preview or print.@@@1@1@8753@1
2582
You cannot set the GroupInterval property to 0 when the GroupOn property is set to
Interval.@Click the Sorting and Grouping Design tab and try one of the following:* Change
the GroupInterval property setting to a number higher than 0.* Change the GroupOn
property setting to Each Value.@@1@@@1
2583
The ApplyFilter action or method can be carried out only from an Open macro or Open event
procedure.@* You may have tried to run a macro or procedure containing the ApplyFilter
action or method from a report property other than the OnOpen property.* You may have
tried to run a macro or event procedure on a report that is already open.@To use the
ApplyFilter action in a report, set the OnOpen property to the name of the macro, close the
report, and then reopen it.@1@1@3004@1
2584
You can't use aggregate functions in a page header or footer.@The page header or footer of
the report you tried to preview contains a calculated control with an aggregate function in its
expression.@If you want to show the result of an aggregate function in a page header or
footer, create a hidden calculated control in an appropriate section of the report. Then create
an unbound text box in the page header or footer.If you are running a macro, use the
SetValue action to set the unbound text box value to the value in the hidden
control.@1@1@11839@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 28 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2585
This action can't be carried out while processing a form or report event.@A macro specified as
the OnOpen, OnLoad, OnClose, OnFormat, OnRetreat, OnPage, or OnPrint property setting
contains an invalid action for the property.@When you click OK, an Action Failed dialog box will
display the name of the macro that failed and its arguments.@1@1@11909@1
2586
Microsoft Office Access changed the MoveLayout and NextRecord properties to True from
False.@The macro or Visual Basic function run by the OnFormat property of one of the
sections of the report set both the MoveLayout and NextRecord properties to False. Having
both properties set to False can make the report print continuously.@Revise the macro or
function so that it sets these properties to the values you want.@1@1@4656@1
2587
Microsoft Office Access can't complete the Output operation.@The Visual Basic code you
entered contains a syntax error or the Output procedures are not available.@Make sure there
isn't a syntax error in your code. If the syntax is correct, run Setup to reinstall Microsoft Office
Access. If you want to preserve your security or custom settings, back up the Microsoft Office
Access workgroup information file.For information on backing up files, search the Microsoft
Windows Help index for 'backing up files'.@1@@185309@1
2588
You must select a form to save as a report.@@@1@@@1
2589
The expression '|' is invalid.@Aggregate functions are only allowed on output fields of the
Record Source. @@1@@@1
2590
The Var and VarP aggregate functions are not supported in an Access project.@@@1@@@1
2591
You can't change printer properties in the OnOpen event of a report.@@@1@@@1
2592
Application-defined or object-defined error
2593
This feature is not available in an MDB or ACCDB.@@@1@@@1
2594
You cannot Filter By Form when form record source is a recordset object.@@@1@@@1
2595
Microsoft Office Access cannot set this property when DefaultSize property is set to
True.@@@1@@@1
2596
Printer object is not available on subforms and subreports.@@@1@@@1
2597
Unable to bind the report to the specified recordset because the shape does not match the
sorting and grouping specified on the report.@@@1@@@1
2598
Application-defined or object-defined error
2599
Report view is not available for this report.@@@1@@@1
2600
Verify the new password by retyping it in the Verify box and clicking OK.@@@1@@@1
2601
You don't have permission to read '|.'@To read this object, you must have Read Design
permission for it. For more information on permissions and who can set them, click
Help.@@2@1@10222@1
2602
You don't have permission to modify '|.'@To modify this object, you must have Modify Design
permission for it. If the object is a table, you must also have Delete Data and Update Data
permissions for it.For more information on permissions and who can set them, click
Help.@@2@1@10222@1
2603
You don't have permission to run '|.'@To run this object, you must have Open/Run permission
for it. For more information on permissions and who can set them, click
Help.@@2@1@10222@1
2604
You can't view this object's permissions.@To view or change permissions for this object, you
must have Administer permission for it. For more information on permissions and who can set
them, click Help.@@2@1@10222@1
2605
You can't remove this user account from group '|.'@* You may have tried to remove a user
account from the default Users group. Microsoft Office Access automatically adds all users to
the default Users group. To remove a user account from the Users group, you must first delete
the account.* You may have tried to remove all users from the Admins group. There must
be at least one user in the Admins group.@@1@1@10212@1
2606
The object type is invalid.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 29 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2607
You don't have permission to cut '|.'@To cut this object, you must have Modify Design
permission for it. If the object is a table, you must also have Delete Data permission for it. For
more information on permissions and who can set them, click Help.@@2@1@10222@1
2608
You don't have permission to copy '|.'@To copy this object, you must have Read Design
permission for it. If the object is a table, you must also have Read Data permission for it. For
more information on permissions and who can set them, click Help.@@2@1@10222@1
2609
You don't have permission to delete '|.'@To delete this object, you must have Modify Design
permission for it. If the object is a table, you must also have Delete Data permission for it. For
more information on permissions and who can set them, click Help.@@2@1@10222@1
2610
You must enter a personal identifier (PID) consisting of at least 4 and no more than 20
characters and digits.@Microsoft Office Access uses the combination of the user or group
name and the PID to identify the user or group.Note that Microsoft Office Access hides the
PID after you create it, so make sure to write down the exact user or group account name and
the PID entries. If you ever have to re-create the account, you must supply the same name
and PID entries.@@1@@@1
2611
Microsoft Office Access can't find the workgroup file '|.' Would you like to use the default
workgroup file?@@@20@@@1
2612
The account name is invalid.@For information about naming conventions, click
Help.@@2@1@10213@1
2613
You don't have permission to rename '|.'@To rename a database object, you must have
Modify Design permission for the object. For more information on permissions and who can set
them, click Help.@@2@1@10222@1
2614
You don't have permission to insert this form into another form.@To insert a form into another
form as a subform, you must have Read Design permission for the form being inserted. For
more information on permissions and who can set them, click Help.@@2@1@10222@1
2615
You don't have permission to change the owner of '|.'@To change the owner of a database
object, you must have Administer permission for it. For more information on permissions and
who can set them, click Help.@@5@1@10222@1
2616
You can't change permissions for '|.'@To change permissions for this object, you must have
Administer permission for it. For more information on permissions and who can set them, click
Help.@@5@1@10222@1
2617
You don't have permission to import, export, or link to '|.'@To import, export, or link to this
object, you must have Read Design and Read Data permissions for it. For more information on
permissions and who can set them, click Help.@@2@1@10222@1
2618
You must have the database open for exclusive use to set or remove the database
password.@To open the database exclusively, close the database, and then reopen it by
clicking the Microsoft Office Button and using the Open command. In the Open dialog box,
click the arrow next to the Open button, and then select Open Exclusive.@@1@@@1
2619
You can't change permissions for '|' in a replica.@Permissions may only be changed in the
Design Master for the replica set.@@3@@@1
2620
The password you entered in the Old Password box is incorrect.@Please enter the correct
password for this account.@@1@@@1
2621
That password isn't valid.@You may have used a semicolon.@@1@@@1
2622
You cannot save '|' because it is read-only.@To save, switch to Design View, click the
Microsoft Office Button, point to Save As, and enter a new name.@@3@@@1
2623
Application-defined or object-defined error
2624
An error has occurred while changing workgroup database.@@@1@@@1
2625
Workgroup Administrator couldn't create the workgroup information file. Make sure that you
have specified a valid path and file name, that you have adequate permissions to create the
file, and that you have enough disk space on the destination drive. (|)@@@1@@@1
2626
Reserved error (|); there is no message for this error.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 30 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2627
There's not enough disk space.@@@1@@@1
2628
One of your parameters is invalid.@@@1@@@1
2629
Could not open workgroup file. This is a directory.@@@1@@@1
2630
The specified path is invalid.@@@1@@@1
2631
The specified path is too long.@@@1@@@1
2632
Change Workgroup cannot proceed without your Name, PIN, and a path to the new
Workgroup Information File.
2633
Microsoft Office Access cannot change the password for the logon account '|' because the
current connection is using Microsoft Windows NT integrated security.@@@1@@@1
2634
The new password doesn't match the verify password value.@@@1@@@1
2635
Microsoft Office Access is unable to change the password because the old password doesn't
match the password of the currently logged in user.
2636
Workgroup file already exists.
2637
Unable to start SQL Server service. To restart the SQL Server service, double-click the SQL
Server System Manager icon in the system tray and click Start/Continue.@When the service is
started, in Microsoft Office Access, click the Microsoft Office Button, point to Server Tasks,
click Connection, and then click OK.@@19@@@2
2638
Unable to start SQL Server service. To restart the SQL Server service, double-click the SQL
Server System Manager icon in the system tray and click Start/Continue. If the service fails to
start, go to the Services console and verify that the MSSQLServer service Log On information
is correct.@When the service is started, in Microsoft Office Access, click the Microsoft Office
Button, point to Server Tasks, click Connection, and then click OK.@@19@@@2
2639
Microsoft Office Access cannot open | due to security restrictions.@Security settings restrict
access to the file because it is not digitally signed.@@2@1@553714138@2
2646
Microsoft Office Access can't create this relationship and enforce referential integrity.@Data in
the table '|' violates referential integrity rules.For example, there may be records relating to
an employee in the related table, but no record for the employee in the primary table.@Edit
the data so that records in the primary table exist for all related records.If you want to
create the relationship without following the rules of referential integrity, clear the Enforce
Referential Integrity check box.@1@1@9086@1
2648
Application-defined or object-defined error
2649
Microsoft Office Access can't enforce referential integrity for this relationship.@Make sure the
fields you drag are primary key fields or uniquely indexed and that the unique index or
primary key is correctly set.If you want to create the relationship without following the rules
of referential integrity, clear the Enforce Referential Integrity check box.@@1@1@9086@1
2650
Microsoft Office Access can't create this relationship and enforce referential integrity.@* The
fields you chose may have different data types.* The fields may have the Number data type
but not the same FieldSize property setting.@Try one of the following:* Select fields with
the same data type.* Open the tables in Design view, and change the data types and field
sizes so that the fields match.If you want to create the relationship without following the
rules of referential integrity, clear the Enforce Referential Integrity check box.@2@1@9086@1
2651
You can't create a relationship between fields with the Memo, OLE Object, Yes/No, or
Hyperlink data type.@You tried to enforce referential integrity for a relationship, but one or
more of the fields you chose have the Memo, OLE Object, Yes/No, or Hyperlink data
type.@Select fields in the grid that don't have these data types, or open the tables in Design
view and change data types.@1@@@1
2652
You can't delete a relationship inherited from a linked database.@@@1@@@1
2680
The form or report includes more OLE objects than Microsoft Office Access can display at one
time.@Delete some of the bound or unbound object frames.@@1@@@1
2683
There is no object in this control.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 31 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2684
The OLE object is empty.@You can't edit a bound object frame if the field in the underlying
table doesn't contain an OLE object.@Right-click the field, click Insert Object, and use the
dialog box to locate and add the object to the field.@1@1@9360@1
2685
The object doesn't have an OLE object data type.@The bound object frame containing the
object you tried to edit isn't bound to a field with the OLE object data type.@If you want to
display an OLE object, set the ControlSource property for the bound object frame to a field
with the OLE object data type. Or use a different control, such as a text box, to display the
data.@1@1@9360@1
2686
Microsoft Office Access is unable to save the | object.@Your computer ran out of disk space
while Microsoft Office Access was saving the OLE object.For information on freeing disk
space, search the Microsoft Windows Help index for 'disk space, freeing'.@@1@@@1
2687
Application-defined or object-defined error
2690
A system resource necessary for displaying the | object isn't available.@Your computer may
be low on memory.@Close unneeded programs, and try the operation again.For more
information on freeing memory, search the Microsoft Windows Help index for 'memory,
troubleshooting'.@1@@@1
2691
Microsoft Office Access can't communicate with the OLE server.@The OLE server may not be
registered.@To register the OLE server, reinstall it.@1@@@1
2694
The Clipboard isn't available.@The Clipboard may be in use by another application, or your
computer may be low on memory.@If your computer is low on memory, close unneeded
programs, and then try the operation again.For more information on freeing memory, search
the Microsoft Windows Help index for 'memory, troubleshooting'.@1@@@1
2695
Microsoft Office Access is unable to display the converted | object.@Delete the object in the
bound object frame, and then re-create it.@@1@@@1
2696
Microsoft Office Access can't read the OLE object.@Delete the object in the bound object
frame, and then re-create it.@@1@@@1
2697
There was a problem loading the | object.@The object you tried to create or edit is not a valid
OLE object.@Re-create the object, and then embed or link it again.@1@1@9360@1
2698
The | object you tried to create or edit is too large to save.@* Your database may not contain
enough space for the object.* Your computer may be out of disk space.For information on
freeing disk space, search the Microsoft Windows Help index for 'disk space,
freeing'.@@1@@@1
2699
The connection with the OLE server was lost, or the OLE server encountered an error while
you were using it.@Restart the OLE server, and then try the operation again.@@1@@@1
2700
Microsoft Office Access can't find an OLE server or a dynamic-link library (DLL) required for the
OLE operation.@The OLE server or DLL may not be registered.@To register the OLE server or
DLL, reinstall it.@1@@@1
2701
The OLE server for the OLE object you tried to create is already open.@Switch to the OLE
server window and close it. Then try to create or edit the OLE object again.@@1@@@1
2702
The | object isn't registered.@The object may be calling an application that isn't installed.@To
register the application, reinstall it.@1@@@1
2703
Microsoft Office Access can't read the | object because communication was interrupted.@If the
OLE server application is located on a network server, make sure your computer is connected
to it.@@1@@@1
2704
The | object you tried to edit doesn't have any displayable information.@@@2@1@9360@1
2707
Microsoft Office Access can't open the file containing the OLE object.@* You may have
specified an invalid file name or an invalid unit of data (such as a range of cells from a
worksheet) within the file for the OLE object.* The file you specified may not be available
because it's locked by another user or you don't have permission to use it.@Try one of the
following:* Make sure the file is available and that you used the correct file name.* Check
the OLE server's documentation for information about the syntax to use when specifying an
OLE object's data.@1@1@9360@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 32 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2711
The file name argument in the GetObject function of the Visual Basic procedure you ran is
invalid.@* You may not have entered, or may have misspelled, the file name.* The unit of
data (such as a range of cells from a worksheet) may not be valid.@Try one of the
following:* Make sure the file is installed on your computer and that you used the correct file
name.* Check the OLE server's documentation for information about the syntax to use when
specifying an OLE object's data.@1@3@1010959@1
2713
A problem occurred when Microsoft Office Access tried to access the | object.@* You may
have specified an invalid file name or an invalid unit of data (such as a range of cells from a
worksheet) within the file for the OLE object.* The file you specified may not be available
because it's locked by another user or you don't have permission to use it.@Try one of the
following:* Make sure that the file is installed on your computer and that you used the
correct file name.* Check the OLE server's documentation for information about the syntax
to use when specifying an OLE object's data.@1@1@9360@1
2714
The | object doesn't support verbs that can be performed on an OLE object, such as play or
edit.@Check the OLE server's documentation for information on the verbs the OLE object
supports, or use the ObjectVerbs property or the ObjectVerbsCount property to find the verbs
supported by an OLE object.@@1@1@6970@1
2715
The index for the Action or the Verb property for the | object is invalid.@The setting you
entered may be a negative number or may be too large.@@1@1@6967@1
2717
The | object has no information that can be displayed.@You tried to perform an operation on a
bound or unbound object frame containing an OLE object, but the OLE object is empty.@Rightclick the frame, click Insert Object, and then use the dialog box to locate and either add or link
to an object from a file that is not empty.@1@1@9360@1
2719
A problem occurred while accessing the | object.@* The OLE server may not be available
because it's on a network server and you lost the connection. Try re-establishing the
connection.* The OLE object may be stored in a linked file, but the file isn't available.
Activate the OLE server outside of Microsoft Office Access, and then open the file containing
the OLE object to verify that it still exists and can be accessed.@@1@@@1
2723
The | object doesn't support the attempted operation.@The OLE object was changed to a
picture, or the link to the object was broken.@If you want to perform the operation, delete the
OLE object, and then embed or link it again.@1@1@9360@1
2724
One or more dynamic-link libraries required for using OLE objects is an incorrect version.@Run
Setup to reinstall Microsoft Office Access. If you want to preserve your security or custom
settings, back up the Microsoft Office Access workgroup information file.For information on
backing up files, search the Microsoft Windows Help index for 'backing up
files'.@@1@@185309@1
2725
The OLE server isn't registered.@To register the OLE server, reinstall it.@@1@@@1
2726
Microsoft Office Access can't perform the OLE operation because it was unable to read the
Windows Registry where the OLE server is registered.@Reinstall the OLE server, and then try
the operation again. If problems continue, reinstall Microsoft Windows and the other
applications on your computer.If you reinstall Microsoft Office Access, you may want to back
up your Microsoft Office Access workgroup information file first to preserve any custom
settings. For information on backing up files, search the Microsoft Windows Help index for
'backing up files'.For information on the Windows Registry, search the Microsoft Windows
Help index for 'registry'.@@1@@@1
2727
Microsoft Office Access can't perform the OLE operation because it was unable to write to the
Windows Registry where the OLE server is registered.@Reinstall the OLE server, and then try
the operation again. If problems continue, reinstall Microsoft Windows and the other
applications on your computer.If you reinstall Microsoft Office Access, you may want to back
up your Microsoft Office Access workgroup information file first to preserve any custom
settings. For information on backing up files, search the Microsoft Windows Help index for
'backing up files'.For information on the Windows Registry, search the Microsoft Windows
Help index for 'registry'.@@1@@@1
2729
The OLE object you tried to edit is busy.@Try again later.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 33 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2730
There was a problem communicating with the OLE server.@Try again later. If you still can't
access the object, try one or more of the following:* Free up system memory. For
information on freeing memory, search the Microsoft Windows Help index for 'memory,
troubleshooting'.* Reinstall the OLE server to make sure it's registered.* Check the OLE
server's documentation for information about the syntax to use when specifying an OLE
object's data.@@1@@@1
2731
An error occurred while accessing the OLE server.@The OLE server may not be registered.@To
register the OLE server, reinstall it.@1@@@1
2732
Microsoft Office Access can't read the | object.@Communication between Microsoft Office
Access and the OLE server was interrupted.@Make sure your computer is connected to the
network server on which the OLE server is located.@1@@@1
2733
The OLE object you tried to edit can't be accessed.@You don't have permission to change the
object, or another user opened and locked the object.@@1@@@1
2734
You can't save the | object now.@The OLE server is running an operation, or another user
opened and locked the object.@Try to save the object again later.@1@@@1
2735
This disk is write-protected. You can't save the | object to it.@@@1@@@1
2737
Microsoft Office Access can't find the file containing the linked OLE object you tried to update
using the OLE/DDE Links command.@You may have misspelled the file name, or the file may
have been deleted or renamed.@If the file has been moved to a different location, use the
OLE/DDE Links command to change the source. Or delete the object, and create a new linked
object.@1@@@1
2738
There isn't enough memory to complete the operation.@Close unneeded programs and try the
operation again.For more information on freeing memory, search the Microsoft Windows
Help index for 'memory, troubleshooting'.@@1@@@1
2739
An error occurred during the operation with an OLE object.@The object is in use.@@1@@@1
2741
Your computer ran out of disk space while Microsoft Office Access was saving the changes you
made to the | object.@For information on freeing disk space, search the Microsoft Windows
Help index for 'disk space, freeing'.@@1@@@1
2742
Microsoft Office Access was unable to create more files.@Your computer may be low on
memory or disk space.@Close unneeded programs and try the operation again.For
information on freeing memory or disk space, search the Microsoft Windows Help index for
'memory, troubleshooting' or 'disk space, freeing'.@1@@@1
2743
The | object is stored in a format that is incompatible with the version of OLE on your
computer.@@@1@@@1
2744
Microsoft Office Access can't find the OLE server.@The setting for the SourceDoc property may
be invalid, or the file may have been deleted, renamed, or moved.@@1@1@6973@1
2745
Share.exe or Vshare.386 is missing from your computer; OLE support needs these files to
work correctly.@Rerun Microsoft Office Access or Microsoft Office Setup to reinstall Microsoft
Office Access, the Share program, and Vshare.386.@If you want to preserve your security or
custom settings, back up the Microsoft Office Access workgroup information file. Then restore
the file to its original location. For information on backing up files, search the Microsoft
Windows Help index for 'backing up files'.@1@@185309@3
2746
You can't switch to Design view because your form contains too many OLE objects.@Close
other applications, close the form, and then open the form again in Design view. Then delete
some of the OLE objects or move them to a different form.@@1@@@1
2747
The OLE server can't display the | object.@There is a problem with the file containing the OLE
object, or there isn't enough memory available.@Open the OLE server outside of Microsoft
Office Access, and then open the OLE object file.If you can do this, then your computer may
be low on memory. Close other programs, and then try the operation again.For more
information on freeing memory, search the Microsoft Windows Help index for 'memory,
troubleshooting'.@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 34 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2748
The Automation object operation isn't available for the | object.@Check the component's
documentation for information on which operations are available for an Automation
object.@@1@@@1
2749
There isn't enough memory to complete the Automation object operation on the |
object.@Close unneeded programs and try the operation again.For more information on
freeing memory, search the Microsoft Windows Help index for 'memory,
troubleshooting'.@@1@@@1
2750
The operation on the | object failed.@The OLE server may not be registered.@To register the
OLE server, reinstall it.@1@@@1
2751
The Exit or Update operation failed.@You pressed the ESC key (or another key used in the
OLE server to stop an operation) while Microsoft Office Access was saving the changes you
made to an OLE object in a form or report.@Try to exit or update again.@1@@@1
2753
A problem occurred while Microsoft Office Access was communicating with the OLE server or
ActiveX Control.@Close the OLE server and restart it outside of Microsoft Office Access. Then
try the original operation again in Microsoft Office Access.@@1@@@1
2754
A problem occurred while Microsoft Office Access was communicating with the OLE
server.@Try one or more of the following:* Make sure you're connected to the network
server where the OLE server application is located.* Close the OLE server and restart it
outside of Microsoft Office Access. Then try the original operation again from within Microsoft
Office Access.* Reinstall the OLE server to ensure that it's registered.@@1@@@1
2755
There was a problem referencing a property or method of the object.@You tried to run a
Visual Basic procedure that references an object property or method.@Try one or more of the
following:* Make sure the component is properly registered.* Make sure your computer is
connected to the network server where the component is located.* Close the component
and restart it outside of Microsoft Office Access. Then try again to run the procedure in
Microsoft Office Access.@1@@@1
2756
A problem occurred when Microsoft Office Access tried to access the OLE object.@Close the
Microsoft Office Access form or report that displays the OLE object, and close the OLE server.
Then reopen the form or report to see if it can display the OLE object.@@1@@@1
2757
There was a problem accessing a property or method of the OLE object.@Try one or more of
the following:* Verify that the OLE server is registered correctly by reinstalling it.* Make
sure your computer is connected to the server on which the OLE server application resides.*
Close the OLE server and restart it outside of Microsoft Office Access. Then try the original
operation again from within Microsoft Office Access.@@1@@@1
2758
Application-defined or object-defined error
2759
The method you tried to invoke on an object failed.@* You may have specified too many or
too few arguments for a property or method of an object. Check the component's
documentation for information on the properties and methods it makes available for
Automation operations.* There may not be enough memory to run the procedure. Close
unneeded programs and try to run the procedure again.For more information on freeing
memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@@1
2760
An error occurred while referencing the object.@You tried to run a Visual Basic procedure that
improperly references a property or method of an object.@@1@@@1
2761
There was a problem referencing a property or method of an object.@Check the component's
documentation for information on the properties and methods it makes available for
Automation operations.@@1@@@1
2762
| returned an error while referencing a property of an object.@Check the component's
documentation for information on the properties and methods it makes available for
Automation operations.@@1@@@1
2763
|1 returned the error: |2.@Check the component's documentation for information on the
properties and methods it makes available for Automation operations.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 35 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2764
The object's property or method can't be set.@You tried to run a Visual Basic procedure to set
a property or apply a method for an object. However, the property or method doesn't support
named arguments.@Check the component's documentation for information on the properties
and methods it makes available to Automation operations.@1@@@1
2765
Visual Basic can't convert the data type of one of the arguments you entered.@You tried to
run a Visual Basic procedure that executes a method or sets a property of an object.@Check
the component's documentation for information on the properties and methods it makes
available for Automation operations.@1@@@1
2766
The object doesn't contain the Automation object '|.'@You tried to run a Visual Basic
procedure to set a property or method for an object. However, the component doesn't make
the property or method available for Automation operations.@Check the component's
documentation for information on the properties and methods it makes available for
Automation operations.@1@@@1
2767
The object doesn't support American English; it was developed using a different
language.@Use a version of the object developed in Visual Basic that supports the language
you are using.@@1@@@1
2768
The number you used to reference an element in the array is outside the bounds of the
array.@For example, the array is from 0 through 10, and you entered a -1 or an 11.@Check
the component's documentation for information on the properties and methods it makes
available for Automation operations.@1@@@1
2769
A property of the Automation object requires or returns a data type that isn't supported by
Visual Basic.@You tried to run a Visual Basic procedure that references an Automation object's
property. However, the value of the property isn't supported by Visual Basic.@Check the
component's documentation for information on the properties and methods it makes available
for Automation operations.@1@@@1
2770
The object you referenced in the Visual Basic procedure as an OLE object isn't an OLE
object.@@@1@@@1
2771
The bound or unbound object frame you tried to edit does not contain an OLE object.@Rightclick the frame, click Insert Object, and then use the dialog box to locate and either add or link
to an object from a file that is not empty.@@1@1@9360@1
2774
The component doesn't support Automation.@You tried to run a Visual Basic procedure that
references an Automation object.@Check the component's documentation for information on
whether it supports Automation.@1@@@1
2775
You specified too many arguments in the Visual Basic procedure, or there isn't enough
memory to run the procedure.@Specify fewer arguments, or close unneeded programs, and
then try to run the procedure again.For more information on freeing memory, search the
Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@@1
2777
The class argument in the CreateObject function of the Visual Basic procedure you're trying to
run is invalid.@Try one of the following:* Make sure the file is installed on your computer
and that you used the correct file name.* Check the OLE server's documentation for
information about the syntax to use when specifying an OLE object's
data.@@1@3@1010851@1
2778
Microsoft Office Access tried to create an OLE link, but there was no source document for this
object.@@@1@@@1
2782
You must specify a property or method for the object.@You tried to run a Visual Basic
procedure that references and sets a property or method for the object.@Enter a property or
method for the object.@1@1@6968@1
2783
You entered an invalid setting for the Action property.@Use one of the Microsoft Office Access
intrinsic constants for the Action property.For a list of valid settings you can use with the
Action property, click Help.@@2@1@6967@1
2784
The path you entered for the SourceDoc property setting for a linked OLE object is too
long.@Move the file to a location with a shorter path.@@1@1@6973@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 36 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2785
The OLE server wasn't able to open the object.@* The OLE server may not be installed.*
You may have specified an invalid setting for the SourceDoc or SourceItem property in a
property sheet, a macro, or a Visual Basic procedure.@To see the valid settings for either of
these properties, search the Help index for the property topic.@1@1@6973@1
2786
The OLE server doesn't support linking.@You tried to run a Visual Basic procedure using the
Action property. However, you provided insufficient information to establish a link.@@1@@@1
2788
The | object isn't a linked object.@The property you tried to set in Visual Basic applies only to
linked objects.@@1@@@1
2790
You can't embed an OLE object into a bound or unbound object frame if the OLETypeAllowed
property for the bound or unbound object frame is set to Linked.@Insert a linked object, or
set the OLETypeAllowed property to Embedded or Either, and then embed the
object.@@1@1@6439@1
2791
Microsoft Office Access can't link the OLE object or the bound or unbound object frame.@The
OLETypeAllowed property for the bound or unbound object frame is set to Embedded.@Embed
the object, or set the OLETypeAllowed property to Linked or Either, and then link the
object.@1@1@6439@1
2792
You can't save a locked OLE object.@@@1@@@1
2793
Microsoft Office Access can't perform the operation specified in the Action property of the
Visual Basic procedure you're trying to run.@The object frame may be locked or
disabled.@Set the Locked property to No and the Enabled property to Yes.@1@@@1
2794
The ActiveX control you tried to insert isn't registered.@For information on registering an
ActiveX control, click Help.@@2@1@12639@1
2797
This OLE object was created in an earlier version of OLE so it can't be displayed as an
icon.@For an effect similar to displaying an object as an icon, add an image control to your
form, and add the icon for the application to the image control. Then set the image control's
OnDblClick property to a Visual Basic procedure that opens the OLE object.@@1@@@1
2798
You can't use the Action property to delete a bound OLE object from its underlying table or
query.@You tried to run a Visual Basic procedure that deletes the object in a bound object
frame by setting the Action property to acOLEDelete.@Delete the object in a different way,
such as with the DAO Delete method in Visual Basic.@1@1@13790@1
2799
The OLE object can't be activated upon receiving the focus.@If you selected an OLE object or
a chart, and the AutoActivate property for that control is set to GetFocus, the OLE object or
chart should be activated automatically when it receives the focus. However, the ActiveX
component doesn't support this operation.@Check the component's documentation for
information on the properties and methods it makes available to Automation
operations.@1@@@1
2800
This object is locked. Any changes you make will be discarded when the form is closed.@Click
the Microsoft Office Button, point to Save As, and save the object under a different
name.@@1@@@1
2801
The OLE object isn't loaded because the unbound ActiveX control hasn't been
initialized.@@@1@1@9015@1
2802
You can't insert an ActiveX control in a bound or unbound object frame.@ActiveX controls are
automatically contained in ActiveX control frames.@@1@@@1
2803
You don't have the license required to use this ActiveX control.@You tried to open a form
containing an OLE object or an ActiveX control or you tried to create an ActiveX control.@To
obtain the appropriate license, contact the company that provides the licensed OLE object or
ActiveX control.@1@@@1
2804
You can't create an ActiveX control in an unbound object frame.@ActiveX controls are
automatically contained in ActiveX control frames.@@1@1@11711@1
2805
There was an error loading an ActiveX control on one of your forms or reports.@Make sure all
the controls that you are using are properly registered. For information on registering an
ActiveX control, click Help.@@2@1@12639@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 37 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2806
Microsoft Office Access doesn't support this ActiveX control.@@@1@@@1
2807
You can't paste this object as the type you specified.@Choose another object type.@@1@@@1
2808
Microsoft Office Access can't find the Active Accessibility dynamic-link library (DLL)
OleAcc.@Rerun the Microsoft Office Access Setup program.@@1@@@3
2809
Application-defined or object-defined error
2811
Microsoft Office Access is unable to create the data access page.
2812
|@The path specified was invalid, or may be too long.@Please check the path and ensure it is
correct.@1@@@1
2813
|@The file could not be opened. It may currently be in use.@@1@@@1
2814
|@Unable to save the file.@@1@@@1
2815
|@Unable to save the file to an alternate location.@@1@@@1
2816
|@Unable to close the file.@@1@@@1
2817
Microsoft Office Access is unable to save (or send) the data access page.
2818
Microsoft Office Access is unable to retrieve the file: |.@Either the file is not available, or you
do not have enough disk space to copy the file.@@1@@@
2819
Microsoft Office Access is unable to open the data access page.
2820
Microsoft Office Access is unable to change the BASE HREF for your document.
2821
File in use
2822
Microsoft Office Access encountered an unexpected error while attempting to recover from a
failed save (or send).@Your data access page may not be in a usable state. Please attempt to
save to a different location.@@1@@@
2823
The Microsoft Office Access data access page name '|' is misspelled or refers to a Page that
doesn't exist.@If the invalid Page name is in a macro, an Action Failed dialog box will display
the macro name and the macro's arguments after you click OK. Open the Macro window, and
enter the correct Page name.@@1@@@1
2824
|@You do not have adequate file permissions.@@1@@@1
2825
|@The file does not exist, or you do not have read access to the file.@@1@@@1
2827
|@File read error.@@1@@@1
2828
|@File write error.@The disk may be full.@1@@@1
2832
|@Check file permissions and delete them from their location in your computer's file
system.@@1@@@1
2833
|@An unexpected error has occurred.@@1@@@1
2835
|@An attempt to create this file has failed.@Please select another location and retry the
operation.@1@@@1
2837
|@There was not enough memory.@Please close other applications and try the operation
again.@1@@@1
2838
Microsoft Office Access is unable to preview the selected theme.
2839
|@An attempt to create a temporary file has failed.@Please confirm that you have adequate
disk space on your system drive and try the operation again.@1@@@1
2840
|@Unable to read the list of supporting files from the data access page.@@1@@@1
2842
Microsoft Office Access encountered an error after saving (or sending) your data access page.
2845
Microsoft Office Access is unable to open the data access page from the mail envelope.
2846
|@The save destination is full.@Please clear space at the destination or save to another
location.@1@@@1
2847
|@Unable to create a folder for the supporting files.@You may not have adequate permissions
at the save destination.@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 38 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2848
|@The maximum path length was exceeded.@Please specifiy a shorter filename, or use a
folder that is closer to the root.@1@@@1
2849
|@There are too many supporting files in your document.@Please remove a few supporting
files from your document, and try again.@1@@@1
2850
|@You do not have write permission at the save destination.@@1@@@1
2851
|@You are saving to a server that does not support long filenames and do not have permission
to create a folder.@You must have permission to create a folder at the save destination to
complete this operation.@1@@@1
2854
Microsoft Office Access was unable to parse the document properties for this data access
page.@They may be corrupted.@@1@@@1
2855
Microsoft Office Access could not delete one or more files related to the page.
2859
Access could not load the e-mail envelope. This could be caused by a network connection
problem or a problem with your Office installation.@@@1@@@1
2860
You cannot insert a bound field to a caption or record navigation section.
2861
Microsoft Office Access is unable to preview the selected web page.
2862
|@Access cannot open the specified file type from a Web server.@You may have selected the
wrong file.@1@@@1
2863
|@Unable to create or load a file due to network or access permission problems.@@1@@@1
2864
|@This file (or a supporting file) is already in use, or has the read-only attribute
set.@@1@@@1
2865
|@The disk is write-protected.@@1@@@1
2866
|@Unexpected data corruption failure.@@1@@@1
2867
|@Unexpected data I/O failure.@@1@@@1
2868
|@You cannot save this data access page over itself because it is read-only.@Please select a
different file for the save.@1@@@1
2869
|@The file does not exist.@You do not have adequate permission to modify the data access
page link to point to a valid file. Please contact the database administrator.@1@@@1
2870
Microsoft Office Access encountered an error synchronizing the HTML from the Microsoft Script
Editor.@Please check the HTML for syntax errors and try again.@@1@@@1
2871
Microsoft Office Access is unable to create a data access page using the codepage selected in
Web Options.@The codepage may not be installed on your system.@Please install the
codepage, or select a different one in Web Options.@1@@@1
2873
|@The filename specified is a long filename, but you have the 'use long filenames' web option
turned off.@Please specify a file name that uses a maximum of eight characters for the name
and three characters for the file extension.@1@@@1
2874
Cannot move or paste the grouping field '|' into a section at a higher group level
2875
|@Unable to complete the save.@The drive or network connection you attempted to save to
may no longer be available.@1@@@1
2876
The data definition of this data access page has been corrupted and can't be repaired. You
must recreate the page. Save has been disabled.
2877
In a Microsoft Office Access database (.mdb), you can't group on a control bound to a field
that has a Memo or OLE Object data type. In a Microsoft Office Access project (.adp), you
can't group on a control bound to a field that has an Image or Text data type.
2878
You cannot add a bound field to a caption or record navigation section.
2879
Caption and record navigation sections cannot contain bound fields.
2880
Can't edit pages that contain framesets.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 39 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2881
This web page contains XML namespaces that may conflict with Access namespaces. You
should edit the HTML source to ensure that all namespaces have a unique prefix.
2882
|@The folder that this Web page would use to organize supporting files is already reserved for
use in the current location.@Please choose a different name or location for this Web
page.@1@@@1
2883
A supporting file path for this data access page has been altered outside of Access.@Please
save this page to a different location and ensure that all supporting files are
maintained.@@1@@@1
2884
Cannot find the database or some database objects that this page refers to. Update the
connection information of the page, or fix the references to the missing database objects.
2885
This page uses a database which is not supported. You will not be able to make data changes
until you connect to a supported database
2886
Components necessary for data access pages are not installed.
2887
|@The path specified is not a valid absolute (non-relative) path or URL.@Please enter a valid
path.@1@@@1
2888
Microsoft Office Access detects some HTML elements between the banner and the section of
your data access page. Saving this page in Access will corrupt it. Close the page without
saving it, and then edit the page in another HTML editor to remove these elements.
2889
This section cannot be deleted.
2890
You cannot edit this page because it contains frames.@The data access page designer cannot
edit pages with frames.@@1@@@1
2891
Application-defined or object-defined error
2892
You can't move the group filter control to another section. Delete the group filter control from
the current section and create it in a different section.
2893
A link to this data access page could not be created because the database cannot be
exclusively locked.@To create the link later, open the page by selecting 'Edit web page that
already exists', and then save.@@1@@@1
2894
The link to the data access page specified could not be updated because the database cannot
be exclusively locked.@To update the link, open this page again when you are the only person
using the database.@@1@@@1
2895
This page was designed with a version of the Microsoft Office Web Components that is not
currently installed on this machine. If you have not been prompted to install those
components on this page, please contact the page author for the installation location.
2896
The operation is only valid on a data access page opened in Design View.@Please switch the
page to Design View and try the operation again.@@1@@@1
2897
You have opened a page that was last modified using Access 2000. To be able to edit the
page, you must save it using a more recent version of the Microsoft Office Web Components.
Do you want Access to convert this page by saving it using a more recent version of the
Microsoft Office Web Components?
2898
Microsoft Office Access has created a backup copy of your original page. This page can be
used if you want to revert to the Office 2000 Web Components.The backup page name is:
'|'
2899
Microsoft Office Access could not create a backup copy of your original page. This page cannot
be opened.
2900
Microsoft Office Access could not upgrade the Office Web Components on your page. This
page cannot be opened.
2901
Error loading ActiveX control '|1' on form or report '|2'.
2902
Access is unable to save the | object because it does not support persistence, or your
computer may have run out of disk space.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 40 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
2903
Do you want to set this folder as the default location for data access pages?@|@@19@@@1
2904
You must match each field on the left with a field on the right.@@@1@@@1
2905
You must choose a linking field for every parameter.@@@1@@@1
2906
'|' contains no fields that can participate in a relationship.@The contents of the RecordSource
property may be invalid, or the RecordSource may contain only fields that are not acceptable
for use in a join.@Correct the RecordSource property for this form or report and try your field
operation again.@1@@@1
2907
Do you want to revert to the saved '|'?@@@19@@@1
2908
The Control ID '|' is already in use. Specify a different ID for the control.@@@@@@1
2909
This relationship is not valid because the fields in the first table do not match the fields in the
second table.@To repair the relationship, select at least one field from each table.@@@@@1
2910
This connection file refers to a provider not supported by data access pages.@Please select a
different connection file.@@@@@1
2911
You cannot change the data access page path while it it open.@Please close the page and try
again.@@@@@1
2912
If you create a data access page in this version of Access, you cannot open it in Design view in
Access 2000. If you have installed the Microsoft Office XP Web Components, however, you can
open this page in Page view in Access 2000.@&Don't show this warning again@@3@@@1
2913
Cannot save to a URL address with a bookmark.@Please specify a valid path.@@@@@1
2914
Microsoft Office Access could not link to a connection file.@A connection string will be
embedded in the page.@@@@@1
2915
Microsoft Office Access is unable to connect to the data source specified in the connection
string of this page.@The server may not exist on the network, or there may be an error in the
connection string information for this page.@@1@@@1
2916
You cannot edit HTML pages created using PowerPoint in Microsoft Office Access.
2917
Invalid HTML color value.
2918
Unable to open or read this connection file.@Either the file has been damaged or the file
format is not valid.@@@@@1
2919
You can't place this control in the section you specified.@@@@@@1
2920
Microsoft Office Access is unable to load the database schema. Save has been disabled.
Either repair or reinstall Microsoft Office.
2921
Microsoft Office Access cannot open this page because it was created using a newer version of
Access. Try opening the page using a newer version of Microsoft Office Access.
2922
Microsoft Office Access has created a backup copy of your original page. This page can be
used if you want to revert to the Office XP Web Components.The backup page name is: '|'
2923
You do not have the correct permissions. Contact the server administrator.
2924
You cannot compact a file that was opened from a Web Server.
2925
You cannot encrypt a file that was opened from a Web Server.
2926
Because of your security settings and current security policy, this control is disabled. To
modify your policy and enable the database, use the Message Bar.
3000
Reserved error (|); there is no message for this error.
3001
Invalid argument.
3002
Could not start session.
3003
Could not start transaction; too many transactions already nested.
3004
**********
3005
'|' is not a valid database name.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 41 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3006
Database '|' is exclusively locked.
3007
Cannot open library database '|'.
3008
The table '|' is already opened exclusively by another user, or it is already open through the
user interface and cannot be manipulated programmatically.
3009
You tried to lock table '|' while opening it, but the table cannot be locked because it is
currently in use. Wait a moment, and then try the operation again.
3010
Table '|' already exists.
3011
The Microsoft Office Access database engine could not find the object '|'. Make sure the object
exists and that you spell its name and the path name correctly.
3012
Object '|' already exists.
3013
Could not rename installable ISAM file.
3014
Cannot open any more tables.
3015
Index not found.
3016
Field will not fit in record.
3017
The size of a field is too long.
3018
Could not find field.
3019
Operation invalid without a current index.
3020
Update or CancelUpdate without AddNew or Edit.
3021
No current record.
3022
The changes you requested to the table were not successful because they would create
duplicate values in the index, primary key, or relationship. Change the data in the field or
fields that contain duplicate data, remove the index, or redefine the index to permit duplicate
entries and try again.
3023
AddNew or Edit already used.
3024
Could not find file '|'.
3025
Cannot open any more files.
3026
Not enough space on disk.
3027
Cannot update. Database or object is read-only.
3028
Cannot start your application. The workgroup information file is missing or opened exclusively
by another user.
3029
Not a valid account name or password.
3030
'|' is not a valid account name.
3031
Not a valid password.
3032
Cannot perform this operation.
3033
You do not have the necessary permissions to use the '|' object. Have your system
administrator or the person who created this object establish the appropriate permissions for
you.
3034
You tried to commit or rollback a transaction without first beginning a transaction.
3035
System resource exceeded.
3036
Database has reached maximum size.
3037
Cannot open any more tables or queries.
3038
System resource exceeded.
3039
Could not create index; too many indexes already defined.
3040
Disk I/O error during read.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 42 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3041
Cannot open a database created with a previous version of your application.
3042
Out of MS-DOS file handles.
3043
Your network access was interrupted. To continue, close the database, and then open it again.
3044
'|' is not a valid path. Make sure that the path name is spelled correctly and that you are
connected to the server on which the file resides.
3045
Could not use '|'; file already in use.
3046
Could not save; currently locked by another user.
3047
Record is too large.
3048
Cannot open any more databases.
3049
Cannot open database '|'. It may not be a database that your application recognizes, or the
file may be corrupt.
3050
Could not lock file.
3051
The Microsoft Office Access database engine cannot open or write to the file '|'. It is already
opened exclusively by another user, or you need permission to view and write its data.
3052
File sharing lock count exceeded. Increase MaxLocksPerFile registry entry.
3053
Too many client tasks.
3054
Too many Memo, OLE, or Hyperlink Object fields.
3055
Not a valid file name.
3056
Could not repair this database.
3057
Operation not supported on linked tables.
3058
Index or primary key cannot contain a Null value.
3059
Operation canceled by user.
3060
Wrong data type for parameter '|'.
3061
Too few parameters. Expected |.
3062
Duplicate output alias '|'.
3063
Duplicate output destination '|'.
3064
Cannot open action query '|'.
3065
Cannot execute a select query.
3066
Query must have at least one destination field.
3067
Query input must contain at least one table or query.
3068
Not a valid alias name.
3069
The action query '|' cannot be used as a row source.
3070
The Microsoft Office Access database engine does not recognize '|' as a valid field name or
expression.
3071
This expression is typed incorrectly, or it is too complex to be evaluated. For example, a
numeric expression may contain too many complicated elements. Try simplifying the
expression by assigning parts of the expression to variables.
3072
|
3073
Operation must use an updateable query.
3074
Cannot repeat table name '|' in FROM clause.
3075
|1 in query expression '|2'.
3076
| in criteria expression.
3077
| in expression.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 43 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3078
The Microsoft Office Access database engine cannot find the input table or query '|'. Make
sure it exists and that its name is spelled correctly.
3079
The specified field '|' could refer to more than one table listed in the FROM clause of your SQL
statement.
3080
Joined table '|' not listed in FROM clause.
3081
Cannot join more than one table with the same name (|).
3082
JOIN operation '|' refers to a field that is not in one of the joined tables.
3083
Cannot use internal report query.
3084
Cannot insert data with action query.
3085
Undefined function '|' in expression.
3086
Could not delete from specified tables.
3087
Too many expressions in GROUP BY clause.
3088
Too many expressions in ORDER BY clause.
3089
Too many expressions in DISTINCT output.
3090
Resultant table not allowed to have more than one AutoNumber field.
3091
HAVING clause (|) without grouping or aggregation.
3092
Cannot use HAVING clause in TRANSFORM statement.
3093
ORDER BY clause (|) conflicts with DISTINCT.
3094
ORDER BY clause (|) conflicts with GROUP BY clause.
3095
Cannot have aggregate function in expression (|).
3096
Cannot have aggregate function in WHERE clause (|).
3097
Cannot have aggregate function in ORDER BY clause (|).
3098
Cannot have aggregate function in GROUP BY clause (|).
3099
Cannot have aggregate function in JOIN operation (|).
3100
Cannot set field '|' in join key to Null.
3101
The Microsoft Office Access database engine cannot find a record in the table '|2' with key
matching field(s) '|1'.
3102
Circular reference caused by '|'.
3103
Circular reference caused by alias '|' in query definition's SELECT list.
3104
Cannot specify fixed column heading '|' in a crosstab query more than once.
3105
Missing destination field name in SELECT INTO statement (|).
3106
Missing destination field name in UPDATE statement (|).
3107
Record(s) cannot be added; no insert permission on '|'.
3108
Record(s) cannot be edited; no update permission on '|'.
3109
Record(s) cannot be deleted; no delete permission on '|'.
3110
Could not read definitions; no read definitions permission for table or query '|'.
3111
Could not create; no modify design permission for table or query '|'.
3112
Record(s) cannot be read; no read permission on '|'.
3113
Cannot update '|'; field not updateable.
3114
Cannot include Memo, OLE, or Hyperlink Object when you select unique values (|).
3115
Cannot have Memo, OLE, or Hyperlink Object fields in aggregate argument (|).
3116
Cannot have Memo, OLE, or Hyperlink Object fields in criteria (|) for aggregate function.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 44 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3117
Cannot sort on Memo, OLE, or Hyperlink Object (|).
3118
Cannot join on Memo, OLE, or Hyperlink Object (|).
3119
Cannot group on Memo, OLE, or Hyperlink Object (|).
3120
Cannot group on fields selected with '*' (|).
3121
Cannot group on fields selected with '*'.
3122
You tried to execute a query that does not include the specified expression '|' as part of an
aggregate function.
3123
Cannot use '*' in crosstab query.
3124
Cannot input from internal report query (|).
3125
'|' is not a valid name. Make sure that it does not include invalid characters or punctuation
and that it is not too long.
3126
Invalid bracketing of name '|'.
3127
The INSERT INTO statement contains the following unknown field name: '|'. Make sure you
have typed the name correctly, and try the operation again.
3128
Specify the table containing the records you want to delete.
3129
Invalid SQL statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', or 'UPDATE'.
3130
Syntax error in DELETE statement.
3131
Syntax error in FROM clause.
3132
Syntax error in GROUP BY clause.
3133
Syntax error in HAVING clause.
3134
Syntax error in INSERT INTO statement.
3135
Syntax error in JOIN operation.
3136
The LEVEL clause includes a reserved word or argument that is misspelled or missing, or the
punctuation is incorrect.
3137
Missing semicolon (;) at end of SQL statement.
3138
Syntax error in ORDER BY clause.
3139
Syntax error in PARAMETER clause.
3140
Syntax error in PROCEDURE clause.
3141
The SELECT statement includes a reserved word or an argument name that is misspelled or
missing, or the punctuation is incorrect.
3142
Characters found after end of SQL statement.
3143
Syntax error in TRANSFORM statement.
3144
Syntax error in UPDATE statement.
3145
Syntax error in WHERE clause.
3146
ODBC--call failed.
3151
ODBC--connection to '|' failed.
3154
ODBC--could not find DLL '|'.
3155
ODBC--insert on a linked table '|' failed.
3156
ODBC--delete on a linked table '|' failed.
3157
ODBC--update on a linked table '|' failed.
3158
Could not save record; currently locked by another user.
3159
Not a valid bookmark.
3160
Table is not open.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 45 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3161
Could not decrypt file.
3162
You tried to assign the Null value to a variable that is not a Variant data type.
3163
The field is too small to accept the amount of data you attempted to add. Try inserting or
pasting less data.
3164
Field cannot be updated.
3165
Could not open .inf file.
3166
Cannot locate the requested Xbase memo file.
3167
Record is deleted.
3168
Invalid .inf file.
3169
The Microsoft Office Access database engine could not execute the SQL statement because it
contains a field that has an invalid data type.
3170
Could not find installable ISAM.
3171
Could not find network path or user name.
3172
Could not open Paradox.net.
3173
Could not open table 'MSysAccounts' in the workgroup information file.
3174
Could not open table 'MSysGroups' in the workgroup information file.
3175
Date is out of range or is in an invalid format.
3176
Could not open file '|'.
3177
Not a valid table name.
3179
Encountered unexpected end of file.
3180
Could not write to file '|'.
3181
Invalid range.
3182
Invalid file format.
3183
The query cannot be completed. Either the size of the query result is larger than the maximum
size of a database (2 GB), or there is not enough temporary storage space on the disk to store
the query result.
3184
Could not execute query; could not find linked table.
3185
SELECT INTO on a remote database tried to produce too many fields.
3186
Could not save; currently locked by user '|2' on machine '|1'.
3187
Could not read; currently locked by user '|2' on machine '|1'.
3188
Could not update; currently locked by another session on this machine.
3189
Table '|1' is exclusively locked by user '|3' on machine '|2'.
3190
Too many fields defined.
3191
Cannot define field more than once.
3192
Could not find output table '|'.
3193
(unknown)
3194
(unknown)
3195
(expression)
3196
The database '|' is already in use by another person or process. When the database is
available, try the operation again.
3197
The Microsoft Office Access database engine stopped the process because you and another
user are attempting to change the same data at the same time.
3198
Could not start session. Too many sessions already active.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 46 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3199
Could not find reference.
3200
The record cannot be deleted or changed because table '|' includes related records.
3201
You cannot add or change a record because a related record is required in table '|'.
3202
Could not save; currently locked by another user.
3203
Subqueries cannot be used in the expression (|).
3204
Database already exists.
3205
Too many crosstab column headers (|).
3206
Cannot create a relationship between a field and itself.
3207
Operation not supported on a Paradox table with no primary key.
3208
Invalid Deleted setting in the Xbase key of the Windows Registry.
3209
**********
3210
The connection string is too long. The connection string cannot exceed 255 characters.
3211
The database engine could not lock table '|' because it is already in use by another person or
process.
3212
Could not lock table '|1'; currently in use by user '|3' on machine '|2'.
3213
Invalid Date setting in the Xbase key of the Windows Registry.
3214
Invalid Mark setting in the Xbase key of the Windows Registry.
3215
Too many Btrieve tasks.
3216
Parameter '|' specified where a table name is required.
3217
Parameter '|' specified where a database name is required.
3218
Could not update; currently locked.
3219
Invalid operation.
3220
Incorrect collating sequence.
3221
Invalid settings in the Btrieve key of the Windows Registry.
3222
Query cannot contain a Database parameter.
3223
'|' is invalid because it is too long, or contains invalid characters.
3224
Cannot read Btrieve data dictionary.
3225
Encountered a record locking deadlock while performing a Btrieve operation.
3226
Errors encountered while using the Btrieve DLL.
3227
Invalid Century setting in the Xbase key of the Windows Registry.
3228
Selected collating sequence not supported by the operating system.
3229
Btrieve--cannot change field.
3230
Out-of-date Paradox lock file.
3231
ODBC--field would be too long; data truncated.
3232
ODBC--could not create table.
3234
ODBC--remote query timeout expired.
3235
ODBC--data type not supported on server.
3238
ODBC--data out of range.
3239
Too many active users.
3240
Btrieve--missing Btrieve engine.
3241
Btrieve--out of resources.
3242
Invalid reference in SELECT statement.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 47 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3243
None of the import field names match fields in the appended table.
3244
Cannot import password-protected spreadsheet.
3245
Could not parse field names from the first row of the import table.
3246
Operation not supported in transactions.
3247
ODBC--linked table definition has changed.
3248
Invalid NetworkAccess setting in the Windows Registry.
3249
Invalid PageTimeout setting in the Windows Registry.
3250
Could not build key.
3251
Operation is not supported for this type of object.
3252
Cannot open a form whose underlying query contains a user-defined function that attempts to
set or get the form's RecordsetClone property.
3254
ODBC--Cannot lock all records.
3256
Index file not found.
3257
Syntax error in WITH OWNERACCESS OPTION declaration.
3258
The SQL statement could not be executed because it contains ambiguous outer joins. To force
one of the joins to be performed first, create a separate query that performs the first join and
then include that query in your SQL statement.
3259
Invalid field data type.
3260
Could not update; currently locked by user '|2' on machine '|1'.
3261
Table '|' is exclusively locked by user '|2' on machine '|1'.
3262
Could not lock table
3263
Invalid Database object.
3264
No field defined--cannot append TableDef or Index.
3265
Item not found in this collection.
3266
Cannot append a Field that is already a part of a Fields collection.
3267
Property can be set only when the Field is part of a Recordset object's Fields collection.
3268
Cannot set this property once the object is part of a collection.
3269
Cannot append an Index that is already a part of an Indexes collection.
3270
Property not found.
3271
Invalid property value.
3272
Object is not a collection.
3273
Method not applicable for this object.
3274
External table is not in the expected format.
3275
Unexpected error from external database driver (|).
3276
Invalid database object reference.
3277
Cannot have more than 10 fields in an index.
3278
The Microsoft Office Access database engine has not been initialized.
3279
The Microsoft Office Access database engine has already been initialized.
3280
Cannot delete a field that is part of an index or is needed by the system.
3281
Cannot delete this index or table. It is either the current index or is used in a relationship.
3282
Operation not supported on a table that contains data.
3283
Primary key already exists.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 48 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3284
Index already exists.
3285
Invalid index definition.
3286
Format of memo file does not match specified external database format.
3287
Cannot create index on the given field.
3288
Paradox index is not primary.
3289
Syntax error in CONSTRAINT clause.
3290
Syntax error in CREATE TABLE statement.
3291
Syntax error in CREATE INDEX statement.
3292
Syntax error in field definition.
3293
Syntax error in ALTER TABLE statement.
3294
Syntax error in DROP INDEX statement.
3295
Syntax error in DROP TABLE or DROP INDEX.
3296
JOIN expression not supported.
3297
Could not import table or query. No records found, or all records contain errors.
3298
There are several tables with that name. Please specify owner in the format 'owner.table'.
3299
ODBC Specification Conformance Error (|). Report this error to the developer of your
application.
3300
Cannot create a relationship.
3301
Cannot perform this operation; features in this version are not available in databases with
older formats.
3302
Cannot change a rule while the rules for this table are in use.
3303
Cannot delete this field. It is part of one or more relationships.
3304
You must enter a personal identifier (PID) consisting of at least 4 and no more than 20
characters and digits.
3305
Invalid connection string in pass-through query.
3306
You have written a subquery that can return more than one field without using the EXISTS
reserved word in the main query's FROM clause. Revise the SELECT statement of the
subquery to request only one field.
3307
The number of columns in the two selected tables or queries of a union query do not match.
3308
Invalid TOP argument in select query.
3309
Property value is too large.
3310
This property is not supported for external data sources or for databases created with a
previous version of Microsoft Jet.
3311
Property specified already exists.
3312
Validation rules and default values cannot be placed on system or linked tables.
3313
Cannot place this validation expression on this field.
3314
You must enter a value in the '|' field.
3315
Field '|' cannot be a zero-length string.
3316
|
3317
One or more values are prohibited by the validation rule '|2' set for '|1'. Enter a value that the
expression for this field can accept.
3318
Values specified in a TOP clause are not allowed in delete queries or reports.
3319
Syntax error in union query.
3320
| in table-level validation expression.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 49 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3321
No database specified in connection string or IN clause.
3322
Crosstab query contains one or more invalid fixed column headings.
3323
The query cannot be used as a row source.
3324
The query is a DDL query and cannot be used as a row source.
3325
Pass-through query with ReturnsRecords property set to True did not return any records.
3326
This Recordset is not updateable.
3327
Field '|' is based on an expression and cannot be edited.
3328
Table '|2' is read-only.
3329
Record in table '|' was deleted by another user.
3330
Record in table '|' is locked by another user.
3331
To make changes to this field, first save the record.
3332
Cannot enter value into blank field on 'one' side of outer join.
3333
Records in table '|' would have no record on the 'one' side.
3334
Can be present only in version 1.0 format.
3335
DeleteOnly called with non-zero cbData.
3336
Btrieve: Invalid IndexDDF option in initialization setting.
3337
Invalid DataCodePage option in initialization setting.
3338
Btrieve: Xtrieve options are not correct in initialization setting.
3339
Btrieve: Invalid IndexDeleteRenumber option in initialization setting.
3340
Query '|' is corrupt.
3341
The current field must match the join key '|' in the table that serves as the 'one' side of one-tomany relationship. Enter a record in the 'one' side table with the desired key value, and then
make the entry with the desired join key in the 'many-only' table.
3342
Invalid Memo, OLE, or Hyperlink Object in subquery '|'.
3343
Unrecognized database format '|'.
3344
The database engine does not recognize either the field '|1' in a validation expression, or the
default value in the table '|2'.
3345
Unknown or invalid field reference '|'.
3346
Number of query values and destination fields are not the same.
3347
Cannot add record(s); primary key for table '|' not in recordset.
3348
Cannot add record(s); join key of table '|' not in recordset.
3349
You cannot record your changes because a value you entered violates the settings defined for
this table or list (for example, a value is less than the minimum or greater than the
maximum). Correct the error and try again.
3350
Object is invalid for operation.
3351
The ORDER BY expression (|) includes fields that are not selected by the query. Only those
fields requested in the first query can be included in an ORDER BY expression.
3352
No destination field name in INSERT INTO statement (|).
3353
Btrieve: Cannot find file Field.ddf.
3354
At most one record can be returned by this subquery.
3355
Syntax error in default value.
3356
You attempted to open a database that is already opened exclusively by user '|2' on machine
'|1'. Try again when the database is available.
3357
This query is not a properly formed data-definition query.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 50 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3358
Cannot open the Microsoft Office Access database engine workgroup information file.
3359
Pass-through query must contain at least one character.
3360
Query is too complex.
3361
Unions not allowed in a subquery.
3362
Single-row update/delete affected more than one row of a linked table. Unique index contains
duplicate values.
3363
Record(s) cannot be added; no corresponding record on the 'one' side.
3364
Cannot use Memo, OLE, or Hyperlink Object field '|' in the SELECT clause of a union query.
3365
Property value not valid for REMOTE objects.
3366
Cannot append a relation with no fields defined.
3367
Cannot append. An object with that name already exists in the collection.
3368
Relationship must be on the same number of fields with the same data types.
3369
**********
3370
Cannot modify the design of table '|'. It is in a read-only database.
3371
Cannot find table or constraint.
3372
No such index '|2' on table '|1'.
3373
Cannot create relationship. Referenced table '|' does not have a primary key.
3374
The specified fields are not uniquely indexed in table '|'.
3375
Table '|1' already has an index named '|2'.
3376
Table '|' does not exist.
3377
No such relationship '|2' on table '|1'.
3378
There is already a relationship named '|' in the current database.
3379
Cannot create relationships to enforce referential integrity. Existing data in table '|2' violates
referential integrity rules in table '|1'.
3380
Field '|2' already exists in table '|1'.
3381
There is no field named '|2' in table '|1'.
3382
Size of field '|' is too long.
3383
Cannot delete field '|'. It is part of one or more relationships.
3384
Cannot delete a built-in property.
3385
User-defined properties do not support a Null value.
3386
Property '|' must be set before using this method.
3387
Cannot find TEMP directory.
3388
Unknown function '|2' in validation expression or default value on '|1'.
3389
Query support unavailable.
3390
Account name already exists.
3391
An error has occurred. Properties were not saved.
3392
**********
3393
Cannot perform join, group, sort, or indexed restriction. A value being searched or sorted on is
too long.
3394
Cannot save property; property is a schema property.
3395
**********
3396
Cannot perform cascading operation. Since related records exist in table '|', referential
integrity rules would be violated.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 51 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3397
Cannot perform cascading operation. There must be a related record in table '|'.
3398
Cannot perform cascading operation. It would result in a null key in table '|'.
3399
Cannot perform cascading operation. It would result in a duplicate key in table '|'.
3400
Cannot perform cascading operation. It would result in two updates to field '|2' in table '|1'.
3401
Cannot perform cascading operation. It would cause field '|' to become Null, which is not
allowed.
3402
Cannot perform cascading operation. It would cause field '|' to become a zero-length string,
which is not allowed.
3403
Cannot perform cascading operation: '|'.
3404
Cannot perform cascading operation. The value entered is prohibited by the validation rule
'|2' set for '|1'.
3405
Error '|' in validation rule.
3406
The expression you are trying to use for the DefaultValue property is invalid because '|'. Use a
valid expression to set this property.
3407
The server's MSysConf table exists, but is in an incorrect format. Contact your system
administrator.
3408
Too many FastFind Sessions were invoked.
3409
Invalid field definition '|' in definition of index or relationship.
3411
Invalid entry. Cannot perform cascading operation in table '|1' because the value entered is
too large for field '|2'.
3412
Cannot perform cascading update on the table because it is currently in use by another user.
3413
Cannot perform cascading operation on table '|1' because it is currently in use by user '|3' on
machine '|2'.
3414
Cannot perform cascading operation on table '|1' because it is currently in use.
3415
Zero-length string is valid only in a Text or Memo field.
3416
|
3417
An action query cannot be used as a row source.
3418
Cannot open '|'. Another user has the table open using a different network control file or
locking style.
3419
Cannot open this Paradox 4.x or 5.x table because ParadoxNetStyle is set to 3.x in the
Windows Registry.
3420
Object invalid or no longer set.
3421
Data type conversion error.
3422
Cannot modify table structure. Another user has the table open.
3423
You cannot use ODBC to import from, export to, or link an external Microsoft Office Access or
ISAM database table to your database.
3424
Cannot create database because the locale is invalid.
3425
This method or property is not currently available on this Recordset.
3426
This action was cancelled by an associated object.
3427
Error in DAO automation.
3428
A problem occurred in your database. Correct the problem by repairing and compacting the
database.
3429
Incompatible version of an installable ISAM.
3430
While loading the Microsoft Excel installable ISAM, OLE was unable to initialize.
3431
This is not a Microsoft Excel 5.0 file.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 52 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3432
Error opening a Microsoft Excel 5.0 file.
3433
Invalid setting in Excel key of the Engines section of the Windows Registry.
3434
Cannot expand named range.
3435
Cannot delete spreadsheet cells.
3436
Failure creating file.
3437
Spreadsheet is full.
3438
The data being exported does not match the format described in the Schema.ini file.
3439
You attempted to link or import a Microsoft Word mail merge file. Although you can export
such files, you cannot link or import them.
3440
An attempt was made to import or link an empty text file. To import or link a text file, the file
must contain data.
3441
Text file specification field separator matches decimal separator or text delimiter.
3442
In the text file specification '|1', the |2 option is invalid.
3443
The fixed width specification '|1' contains no column widths.
3444
In the fixed width specification '|1', column '|2' does not specify a width.
3445
Incorrect version of the DLL file '|' was found.
3446
The VBA file (VBAJET.dll for 16-bit versions, or VBAJET32.dll for 32-bit versions) is missing.
Try reinstalling the application that returned the error.
3447
The VBA file (VBAJET.dll for 16-bit versions, or VBAJET32.dll for 32-bit versions) failed to
initialize when called. Try reinstalling the application that returned the error.
3448
A call to an OLE system function was not successful. Try reinstalling the application that
returned the error.
3449
No country/region code found in connection string for a linked table.
3450
Syntax error in query. Incomplete query clause.
3451
Illegal reference in query.
3452
You cannot make changes to the design of the database at this replica.
3453
You cannot establish or maintain an enforced relationship between a replicated table and a
local table.
3455
Cannot make the database replicable.
3456
Cannot make the |2 object in |1 container replicable.
3457
You cannot set the KeepLocal property for an object that is already replicated.
3458
The KeepLocal property cannot be set on a database; it can be set only on the objects in a
database.
3459
After a database has been replicated, you cannot remove the replication features from the
database.
3460
The operation you attempted conflicts with an existing operation involving this member of the
replica set.
3461
The replication property you are attempting to set or delete is read-only and cannot be
changed.
3462
Failure to load a DLL.
3463
Cannot find the .dll '|2'.
3464
Data type mismatch in criteria expression.
3465
The disk drive you are attempting to access is unreadable.
3468
Access was denied while accessing dropbox folder '|2'.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 53 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3469
The disk for dropbox folder '|2' is full.
3470
Disk failure accessing dropbox folder '|2'.
3471
Failure to write to the Synchronizer log file.
3472
Disk full for path '|1'.
3473
Disk failure while accessing log file '|1'.
3474
Cannot open the log file '|1' for writing.
3475
Sharing violation while attempting to open log file '|1' in Deny Write mode.
3476
Invalid dropbox path '|2'.
3477
Dropbox address '|2' is syntactically invalid.
3478
The replica is not a partial replica.
3479
Cannot designate a partial replica as the Design Master for the replica set.
3480
The relationship '|' in the partial filter expression is invalid.
3481
The table name '|' in the partial filter expression is invalid.
3482
The filter expression for the partial replica is invalid.
3483
The password supplied for the dropbox folder '|2' is invalid.
3484
The password used by the Synchronizer to write to a destination dropbox folder is invalid.
3485
The object cannot be replicated because the database is not replicated.
3486
You cannot add a second Replication ID AutoNumber field to a table.
3487
The database you are attempting to replicate cannot be converted.
3488
The value specified is not a ReplicaID for any member in the replica set.
3489
The object specified cannot be replicated because it is missing a necessary resource.
3490
Cannot create a new replica because the '|2' object in '|1' container could not be replicated.
3491
The database must be opened in exclusive mode before it can be replicated.
3492
The synchronization failed because a design change could not be applied to one of the replicas.
3493
Cannot set the specified Registry parameter for the Synchronizer.
3494
Unable to retrieve the specified Registry parameter for the Synchronizer.
3495
There are no scheduled synchronization's between the two Synchronizers.
3496
Replication Manager cannot find the ExchangeID in the MSysExchangeLog table.
3497
Unable to set a schedule for the Synchronizer.
3499
Cannot retrieve the full path information for a member of the replica set.
3500
You cannot specify two different Synchronizers to manage the same replica.
3502
The Design Master or replica is not being managed by a Synchronizer.
3503
The Synchronizer's Registry has no value set for the key you queried.
3504
The Synchronizer ID does not match an existing ID in the MSysTranspAddress table.
3505
You attempted to delete or get information about a partial filter that does not exist in
MSysFilters.
3506
The Synchronizer is unable to open the Synchronizer log.
3507
Failure writing to the Synchronizer log.
3508
There is no active transport for the Synchronizer.
3509
Could not find a valid transport for this Synchronizer.
3510
The member of the replica set you are attempting to synchronize is currently being used in
another synchronization.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 54 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3512
Failed to read the dropbox folder.
3513
Failed to write to the dropbox folder.
3514
Synchronizer could not find any scheduled or on-demand synchronization's to process.
3515
The Microsoft Office Access database engine could not read the system clock on your
computer.
3516
Destination synchronizer is not configured to support indirect synchronronization, and the
destination replica is unavailable for direct synchronization.
3517
Synchronizer could not find any messages to process.
3518
Could not find Synchronizer in the MSysTranspAddress table.
3519
Failed to send a message.
3520
The replica name or ID does not match a currently managed member of the replica set.
3521
Two members of the replica set cannot be synchronized because there is no common point to
start the synchronization.
3522
Synchronizer cannot find the record of a specific synchronization in the MSysExchangeLog
table.
3523
Synchronizer cannot find a specific version number in the MSysSchChange table.
3524
The history of design changes in the replica does not match the history in the Design Master.
3525
Synchronizer could not access the message database.
3526
The name selected for the system object is already in use.
3527
The Synchronizer or Replication Manager could not find the system object.
3528
There is no new data in shared memory for the Synchronizer or Replication Manager to read.
3529
The Synchronizer or Replication Manager found unread data in the shared memory. The
existing data will be overwritten.
3530
The Synchronizer is already serving a client.
3531
The wait period for an event has timed out.
3532
Synchronizer could not be initialized.
3533
The system object used by a process still exists after the process has stopped.
3534
Synchronizer looked for a system event but did not find one to report to the client.
3535
Client has asked the Synchronizer to terminate operation.
3536
Synchronizer received an invalid message for a member of the replica set that it manages.
3537
The Synchronizer's client is no longer present and cannot be notified.
3538
Cannot initialize Synchronizer because there are too many applications running.
3539
A system error has occurred or your swap file has reached its limit.
3540
Your swap file has reached its limit or is corrupted.
3541
Synchronizer could not be shut down properly and is still active.
3542
Process stopped when attempting to terminate Synchronizer client.
3543
Synchronizer has not been set up.
3544
Synchronizer is already running.
3545
The two replicas you are attempting to synchronize are from different replica sets.
3546
The type of synchronization you are attempting is not valid.
3547
Synchronizer could not find a replica from the correct set to complete the synchronization.
3548
GUIDs do not match or the requested GUID could not be found.
3549
The file name you provided is too long.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 55 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3550
There is no index on the GUID column.
3551
Unable to delete the specified Registry parameter for the Synchronizer.
3552
The size of the Registry parameter exceeds the maximum allowed.
3553
The GUID could not be created.
3555
All valid nicknames for replicas are already in use.
3556
Invalid path for destination dropbox folder.
3557
Invalid address for destination dropbox folder.
3558
Disk I/O error at destination dropbox folder.
3559
Failure to write because destination disk is full.
3560
The two members of the replica set you are attempting to synchronize have the same
ReplicaID.
3561
The two members of the replica set you are attempting to synchronize are both Design
Masters.
3562
Access denied at destination dropbox folder.
3563
Fatal error accessing a local dropbox folder.
3564
Synchronizer cannot find the source file for messages.
3565
There is a sharing violation in the source dropbox folder because the message database is
open in another application.
3566
Network I/O error.
3567
Message in dropbox folder belongs to the wrong Synchronizer.
3568
Synchronizer could not delete a file.
3569
This member of the replica set has been logically removed from the set and is no longer
available.
3570
The filters defining a partial replica have been changed. The partial replica must be
repopulated.
3571
The attempt to set a column in a partial replica violated a rule governing partial replicas.
3572
A disk I/O error occurred while reading or writing to the TEMP directory.
3573
The directory you queried for a list of replicas is not a managed directory.
3574
The ReplicaID for this member of the replica set was reassigned during a move or copy
procedure.
3575
The disk drive you are attempting to write to is full.
3576
The database you are attempting to open is already in use by another application.
3577
Cannot update replication system column.
3578
Failure to replicate database; cannot determine whether the database is open in exclusive
mode.
3579
Could not create replication system tables needed to make the database replicable.
3580
Could not add rows needed to make the database replicable.
3581
Cannot open replication system table '|' because the table is already in use.
3582
Cannot make a new replica because the |2 object in |1 container could not be made replicable.
3583
Cannot make the |2 object in |1 container replicable.
3584
Insufficient memory to complete operation.
3585
Cannot replicate the table; the number of columns exceeds the maximum allowed.
3586
Syntax error in partial filter expression on table |1.
3587
Invalid expression in the ReplicaFilter property.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 56 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3588
Error when evaluating the partial filter expression.
3589
The partial filter expression contains an unknown function.
3590
Violates the rules for partial replicas.
3591
Log file path '|1' is invalid.
3592
You cannot replicate a password-protected database or set password protection on a
replicated database.
3593
You cannot change the data master attribute for the replica set.
3594
You cannot change the data master attribute for the replica set. It allows data changes only
at the Design Master.
3595
The system tables in your replica are no longer reliable and the replica should not be used.
3600
Aggregation expressions cannot use GUIDs.
3605
Synchronizing with a non-replicated database is not allowed. The '|' database is not a Design
Master or replica.
3607
The replication property you are attempting to delete is read-only and cannot be removed.
3608
Record length is too long for an indexed Paradox table.
3609
No unique index found for the referenced field of the primary table.
3610
Same table '|' referenced as both the source and destination in make-table query.
3611
Cannot execute data definition statements on linked data sources.
3612
Multi-level GROUP BY clause is not allowed in a subquery.
3613
Cannot create a relationship on linked ODBC tables.
3614
GUID not allowed in Find method criteria expression.
3615
Type mismatch in expression.
3616
Updating data in a linked table is not supported by this ISAM.
3617
Deleting data in a linked table is not supported by this ISAM.
3618
Exceptions table could not be created on import/export.
3619
Records could not be added to exceptions table.
3620
The connection for viewing your linked Microsoft Excel worksheet was lost.
3621
Cannot change password on a shared open database.
3622
You must use the dbSeeChanges option with OpenRecordset when accessing a SQL Server
table that has an IDENTITY column.
3623
Cannot access the FoxPro 3.0 bound DBF file '|'.
3624
Could not read the record; currently locked by another user.
3625
The text file specification '|' does not exist. You cannot import, export, or link using the
specification.
3626
The operation failed. There are too many indexes on table '|'. Delete some of the indexes on
the table and try the operation again.
3627
Cannot find the executable file for the Synchronizer (mstran40.exe).
3628
Partner replica is not managed by a Synchronizer.
3629
Synchronizer '|1' is also using the same File System dropbox '|2'.
3630
Synchronizer '|1' is also using the same File System dropbox '|2'.
3631
Invalid Table Name In Filter
3632
Internet Transport not enabled on the remote Synchronizer.
3633
Cannot load DLL: '|'
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 57 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3634
Cannot create a replica using a partial replica.
3635
Cannot create partial replica of a system database.
3636
Cannot populate the replica or change the replica's filter because the replica has conflicts or
data errors.
3637
Cannot use the crosstab of a non-fixed column as a subquery.
3638
A Source Controlled database cannot be made replicable.
3639
Cannot create a replica of a System database.
3640
The fetch buffer was too small for the amount of data you requested.
3641
There are fewer records remaining in the recordset than you requested.
3642
A cancel was performed on the operation.
3643
One of the records in the recordset was deleted by another process.
3645
One of the binding parameters is incorrect.
3646
The specified row length is shorter than the sum of the column lengths.
3647
A column requested is not being returned to the recordset.
3648
Cannot synchronize a partial replica with another partial replica.
3649
The language-specific code page was not specified or could not be found.
3650
Either the Internet is very slow or there is some problem in the replication manager setup on
the internet server machine.
3651
Invalid internet address.
3652
Internet login failure.
3653
Internet not set up.
3654
Internal internet failure.
3655
The wininet.dll cannot be loaded or initialized.
3656
Error in evaluating a partial expression
3657
Error in evaluating the boolean filter expression for table '|1'.
3658
Binary column '|' cannot be used in a boolean filter.
3659
Relationship '|1' is unenforced. Relationship in a partial filter expression must be enforced.
3660
Requested exchange failed because '|1'.
3661
Requested exchange failed because '|1'
3663
This operation requires a different cursor library.
3664
An asynchronous OpenConnection call is not yet complete; you cannot yet reference the
returned connection object until it is complete.
3665
You cannot modify the replication system object '|'.
3666
You cannot modify the replication system object '|'.
3667
A different operation is preventing this operation from being executed.
3668
Cannot perform this operation because there is no active connection.
3669
Execution cancelled.
3670
Cursor is not valid.
3671
Cannot find table to update.
3672
Failed to load RDOCURS.DLL.
3673
This table contains cells that are outside the range of cells defined in this spreadsheet.
3674
Internet dll (wininet.dll) could not be found or loaded.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 58 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3675
Failure to read from an internet handle. Try the operation again.
3676
Failure to write to an internet handle. Try the operation again.
3677
Failure to execute the HTTP request to start internet synchronizer on the internet server. Use
Replication Manager to configure internet synchronizer on the internet server.
3678
Failure to connect to the FTP service on the internet server. Make sure that FTP service is
running properly on the server and supports anonymous connections.
3679
Failure to do open file using FTP service. Make sure that FTP dropbox has read permissions.
3680
Failure in getting a file from the server using FTP. Make sure that FTP dropbox has read
permissions.
3681
Failure in putting a file to the server using FTP. Make sure that FTP dropbox has write
permissions.
3682
Failure to delete a file on the server using FTP. Make sure that FTP dropbox has read and write
permissions.
3683
Internet synchronizer exited unexpectedly on the server. Look at the partner replica exchange
history on the internet server to figure out the problem.
3684
There is no suitable replica with which to exchange.
3685
Invalid HTTP address.
3686
Invalid replica path or name.
3687
Invalid SQL syntax - expected token: Option.
3688
Invalid SQL syntax - expected token: For.
3689
Invalid SQL syntax - expected token: Privileges.
3690
Invalid SQL syntax - expected a table right/privilege.
3691
Invalid SQL syntax - expected an object name.
3692
Invalid SQL syntax - related tokens did not match. Microsoft Office Access database engine
expected GRANT...TO, REVOKE...FROM, ADD...TO, or DROP...FROM.
3693
Invalid SQL syntax - expected user or group name.
3694
Invalid SQL syntax - expected token: Grant.
3695
Invalid SQL syntax - GRANT/REVOKE syntax error.
3696
Invalid SQL syntax - expected token: User (or) Group.
3697
Invalid SQL syntax - expected token: Password.
3698
Invalid SQL syntax - expected password.
3699
Invalid SQL syntax - expected token: User.
3700
Invalid precision for decimal data type.
3701
Invalid scale for decimal data type.
3702
The width of a Unicode text column must be an even number of bytes.
3703
Operation not supported on replicable databases that have not been converted to the current
version.
3704
You attempted to open a database that is already opened by user '|2' on machine '|1'. Try
again when the database is available.
3705
Cannot make the |2 table replicable - too many columns.
3706
Cannot make the |2 table replicable - too many indexes.
3707
The cascading options for the new reference conflict with existing reference '|'.
3708
Syntax error in Transaction statement. Expected TRANSACTION, WORK, or nothing.
3709
The search key was not found in any record.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 59 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3710
MAPI folder or address book not found.
3711
Recovered replicable data. This row was recovered from a corrupted replicable database.
Verify that the record contents are correct and then reinsert the record, or delete this conflict
record.
3712
Other. This record was rejected due to an undefined replication conflict problem.
3713
Update/update conflict. Another replica also updated this record. This record lost the conflict.
Either resubmit your update or delete this conflict record.
3714
Locked table. This record could not be applied during synchronization since the table was
locked by another user. Resubmit this conflict record.
3715
Unique key violation. This record has the same key value as another record, whereas only
unique values are permitted. Either change the key value in this conflict record or the winning
record and then resubmit this record, or delete this conflict record.
3716
TLV violation. This record contains a field value that does not meet the table level validation
constraint. Either update the field value that is violating the validation rule and then resubmit
this conflict record, or delete this conflict record.
3717
Delete/RI conflict. The primary key record has been deleted by another replica, therefore this
referencing record has been rejected. Either create a new primary key record that satisfies
the referential integrity constraint and then resubmit your update, or delete this conflict record.
3718
Update/RI conflict. The primary key record has been updated by another replica, therefore this
referencing record has been rejected. Either create a new primary key record that satisfies
the referential integrity constraint, modify the foreign key value in this conflict record to match
a valid primary key value and then resubmit your update, or delete this conflict record.
3719
Foreign key violation resulting from an invalid primary key record that was involved in a
replication conflict. Either create a new primary key record that satisfies the referential
integrity constraint, modify the foreign key value in this conflict record to match a valid
primary key value and then resubmit this conflict record, or delete this conflict record.
3720
Cannot change field '|'. It is part of one or more relationships.
3721
Invalid SQL syntax - expected constraint name.
3722
Invalid SQL syntax - expected token: DEFAULT.
3723
Invalid SQL syntax - expected token: COMPRESSION to follow WITH.
3724
Invalid SQL syntax - expected token: UPDATE or DELETE.
3725
Invalid SQL syntax - expected token: CASCADE, SET NULL, or NO ACTION.
3726
Invalid SQL syntax - expected token: NULL.
3727
Invalid SQL syntax - only one update rule and/or one delete rule allowed.
3728
Invalid SQL syntax - expected token: AS.
3729
Invalid SQL syntax - expected token: SELECT.
3730
VIEW cannot contain a parameter.
3731
The number of aliases specified shall be the same as the number of output columns.
3732
Expected query name after EXECUTE.
3733
The database has been placed in a state by an unknown user that prevents it from being
opened or locked.
3734
The database has been placed in a state by user '|2' on machine '|1' that prevents it from
being opened or locked.
3735
Too many columns in inverted index.
3736
Update/delete conflict. This updated record was deleted at another replica. Either reinsert this
conflict record or delete it.
3737
Cannot create this type of replica from the given source replica.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 60 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3738
Local or Anonymous replicas must synch only to their designated hub replica.
3739
The proxy replica has been removed.
3740
Cannot add a new column to conflict table '|'. Delete obsolete columns and compact the
database.
3741
Invalid partner synchronizer. Local or anonymous replica must synchronize with designated
hub replica.
3742
An internet function timed out.
3743
Replica has not been synchronized within the replica set retention period.
3744
Counter columns in replicable tables cannot be modified.
3745
The combined length of Internet Server Name, HTTP Share name, and FTP alias name should
not be greater than 252 characters.
3746
Syntax error in parameters clause. Make sure the parameter exists and that you typed its
value correctly.
3747
Parameter has no default value.
3748
Parameter | has no default value.
3749
The object is not a stored procedure.
3750
Object | is not a stored procedure.
3751
Requested row locking, but DB is in page lock mode.
3752
Requested page locking, but DB is in row lock mode.
3753
Cannot create replica of a Microsoft Office Access database engine SQL replica.
3754
Cannot delete from a Prevent Deletes Replica.
3755
CHECK constraint '|' does not exist.
3756
CHECK constraint '|' already exists.
3757
The Microsoft Office Access database engine sorting DLLs could not be loaded properly.
3758
Scaling of decimal value resulted in data truncation.
3759
Scaling of decimal value resulted in data truncation.
3760
Scaling of decimal value resulted in data overflow.
3761
The decimal field's precision is too small to accept the numeric you attempted to add.
3762
Invalid SQL syntax - expected token: ACTION.
3763
Concurrent schema changes caused the create replica operation to fail. Try again.
3764
Failed to re-create one or more indexes.
3765
Syntax error in CHECK constraint clause.
3766
Only simple SELECT queries are allowed in VIEWS.
3767
Table '|' could not be made replicable because it could not be opened exclusively.
3768
FastFind cannot search on non-column references.
3769
Conflict tables cannot be renamed.
3770
Counter definition not in valid range.
3771
Local or Anonymous replicas cannot be made the design master.
3772
Without Administer permission, replica priority must be in the range 0 - |.
3773
Cannot delete one or more objects: |.
3774
Pin value is not valid.
3775
Unable to load Microsoft Office Access database SQL Server Reconciler - MSRPJT40.dll.
3776
Unable to exchange between two Microsoft Office Access database SQL Server Replicas.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 61 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3777
Illegal Operation performed on a Microsoft Office Access database SQL Server Replica.
3778
The Microsoft Office Access database is wrong or missing for this SQL/Microsoft Office Access
database replica set.
3779
Unable to change Column Level Tracking Property on objects that are already Replicable.
3780
Invalid SQL syntax - expected a view name.
3781
Invalid SQL syntax - expected a procedure name.
3782
Invalid SQL syntax - currently only one column-level CHECK constraint is allowed.
3783
Invalid SQL syntax - cannot use multiple columns in a column-level CHECK constraint.
3784
Database is already replicable.
3785
Invalid SQL syntax - expected token: Database.
3786
Invalid SQL syntax - expected a database privilege, such as CREATEDB or CONNECT.
3787
This operation is not allowed in subqueries.
3788
Cannot create an index on this MAPI folder/addressbook.
3789
Illegal column-level constraint.
3790
This object requires a newer version of the Microsoft Office Access database engine.
3791
This index requires Microsoft Office Access database engine |.
3792
The index '|2' requires Microsoft Office Access database engine |1.
3793
The column '|2' requires Microsoft Office Access database engine |1.
3794
This table requires Microsoft Office Access database engine |.
3795
The table '|2' requires Microsoft Office Access database engine |1.
3796
The version of AceRecr.DLL that was loaded was too old. Run setup again to get the correct
version of this file.
3797
The SQL/Microsoft Office Access database engine exchange failed, look in the SQLServer
Agent history for details.
3798
CHECK constraints are not allowed on replicable databases.
3799
Could not find field '|'.
3800
'|' is not an index in this table.
3801
The object (|) cannot be used in a CHECK constraint clause.
3802
Error evaluating | CHECK constraint. |
3803
DDL cannot be completed on this table because it is referenced by constraint | on table |.
3804
There are no MAPI clients installed on this machine. Install a MAPI client (like Outlook) on this
machine.
3805
CHECK constraints on table | will not be transferred to this table. CHECK constraints can only
be created via SQL DDL statements.
3806
Cannot set multiple NULL, NOT NULL attributes.
3807
Query | contains an ambiguous column name that is conflicting with the correlation (alias)
name |. Either fully qualify the column name or change the correlation (alias) name.
3808
Need a version 4.x or greater format system database to perform this operation.
3809
Query | was created with a later release of Microsoft Office Access database engine and may
have syntax that this version of Microsoft Office Access database engine cannot execute. This
query can only be executed with the version of Microsoft Office Access database that created it.
3810
Unrecognized keyword WHEN.
3811
Query could not be executed.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 62 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3812
You cannot update this field because the value you're trying to apply is not valid or would
break a data integrity rule. Please correct and try again.
3813
SQL pass through queries are disabled.
3814
Columns that accept multiple values for a record cannot be included in a multiple-column
relationship.
3815
Columns that accept multiple values for a record cannot be included in a multiple-column
index.
3816
The unique index on the '|' column cannot be deleted.
3817
The multi-valued field '|' is not valid in a CROSSTAB query.
3818
Operation cannot be completed on this database because it uses attachements or multi-valued
lookup fields.
3819
Find cannot be executed on columns that accept multiple values for a record.
3820
You cannot enter that value because it duplicates an existing value in the multi-valued lookup
or attachment field. Multi-valued lookup or attachment fields cannot contain duplicate values.
3821
You cannot change a multi-valued lookup field to the selected data type.
3822
The value cannot be added to this new row until the row has been committed. Commit the row
first, and then try adding the value.
3823
You cannot edit this field because it resides in a linked Excel spreadsheet. The ability to edit
data in a linked Excel spreadsheet has been disabled in this Access release.
3824
An INSERT INTO query cannot contain a multi-valued field.
3825
SELECT * cannot be used in an INSERT INTO query when the source or destination table
contains a multi-valued field.
3826
An UPDATE or DELETE query cannot contain a multi-valued field.
3827
Cannot perform an aggregate function on a multi-valued column when a JOIN clause contains
a different multi-valued column.
3828
Cannot reference a table with a multi-valued field using an IN clause that refers to another
database.
3829
The multi-valued field '|' cannot be used in an ORDER BY clause.
3830
The multi-valued field '|' cannot be used in an GROUP BY clause.
3831
The multi-valued field '|' cannot be used in a WHERE or HAVING clause.
3832
The current file format no longer supports user-level security. The conversion or compaction
process has removed any user-level permissions.
3833
The multi-valued field '|' is not valid in the specified JOIN clause.
3834
The multi-valued field '|1' is not valid in the expression '|2'.
3835
The DISTINCT keyword cannot be used with the multi-valued field '|'.
3836
You are attempting to work with a Paradox file that requires the Borland Database Engine
(BDE). Microsoft Office Access cannot load the BDE, or the BDE is not correctly installed. To
correct this, run the setup program for the BDE.
3837
The multi-valued field '|' cannot be used in a UNION query.
3838
Multi-valued fields are not allowed in SELECT INTO statements.
3839
The specified file exists already.
3840
The attachment you are adding exceeds the system resources available.
3841
Cannot connect to the Sharepoint site '|'. Try again later.
3842
The expression '|' must be part of an aggregate function.
3843
An INSERT INTO query that contains a multivalued field cannot contain another field.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 63 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
3844
Cannot reference a multi-valued field in an UPDATE or DELETE statement that contains other
fields.
3845
Microsoft Office Access does not support linking to an Access database or Microsoft Office
Excel workbook saved in a format that is a later version than the current database format.
3846
The multi-valued field '|' in an ORDER BY must also appear in the SELECT list.
3847
ODBCDirect is no longer supported. Rewrite the code to use ADO instead of DAO.
3848
You cannot record your changes because a value you entered violates the settings defined for
field '|' (for example, a value is less than the minimum or greater than the maximum).
Correct the error and try again.
3849
Replication is only supported on Access 2000 or Access 2002-2003 format databases. Use the
conversion feature in your application to convert the database to the proper format.
3850
This file was created in a previous beta version of Excel 2007. Open the file with Excel 2007 to
save it to the most recent version of the Excel 2007 file format before opening the file in
Access 2007.
3851
The schema for this table has changed. You must refresh the table before editing or adding
new records
3852
Cannot update a multivalued field if its parent recordset is not in edit mode. To place the
parent recordset in edit mode use the AddNew or Edit method.
3853
Microsoft Office Access cannot create the database in the specified format because of a Group
Policy set by your administrator. Create the database using a different file format or contact
your administrator.
3854
This operation will fail because the text file you are about to import contains more than 255
columns. We recommend that you first make a backup copy of your source file, reduce the
number of columns to 255 or less, and then try again.
6000
Errors were encountered during the save operation.@@@1@@@1
6001
A form or report cannot be the subdatasheet of a table or query.@Only a table or query can
be inserted into another table or query.@@1@@@1
6002
Microsoft Office Access cannot expand this subdatasheet because all of the records are locked.
@Either the RecordLocks property of the form or report or the Default Record Locking option in
the Advanced section of the Access Options dialog box (click the Microsoft Office Button, and
then click Access Options) is set to All Records.@Reset the value to No Locks or Edited Record,
as appropriate.@1@1@472@1
6003
The setting for the Precision property must be from 1 through 28.@@@1@@@1
6004
The setting for the Scale property must be from 0 through 28.@@@1@@@1
6005
The table or query name '|' you entered in either the property sheet or macro is misspelled or
refers to a table or query that doesn't exist.@If the invalid name is in a macro, an Action
Failed dialog box will display the macro name and the macro's arguments after you click OK.
Open the Macro window, and enter the correct name.@@1@@@1
6006
Filter by selection of a partial value is only supported for fields containing character
data.@@@1@@@1
6007
Cannot open a form bound to a stored procedure in server filter by form mode.@@@1@@@1
6008
Microsoft Office Access encountered an error closing your connection. @Please close all of your
application windows before trying again.@@1@@@1
6009
Invalid connection string.@You may need to specify a valid connection string and try it
again.@@1@@@1
6010
Invalid use of Move method.@The Move method is not applicable to subforms or
subreports.@@1@@@1
6011
Do you want to save the data changes on form '|'?@@@13@@@4
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 64 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
6012
Microsoft Office Access can't set this property to No right now.@You cannot set the Allow Form
View, Allow Datasheet View, Allow PivotTable View, and Allow PivotChart View properties to No
at the same time.@Set one of the other properties to Yes before changing this one to
No.@1@@@1
6013
Unable to remove item. '|' not found in list.@@@1@@@1
6014
The RowSourceType property must be set to 'Value List' to use this method.@@@1@@@1
6015
Can't add this item. The index is too large.@@@1@@@1
6016
Application-defined or object-defined error
6017
Microsoft Office Access doesn't support the requested property for this type of database
object.@The DateCreated and DateModified properties are not supported for Tables, Queries,
Stored Procedures, Database Diagrams, and Functions in a Client Server database.@@1@@@1
6018
The form or report template is open in Design view. Before creating a new form or report,
close the corresponding template.@@@1@@@1
6019
Application-defined or object-defined error
6020
This format does not support objects named '|'. Rename the object and try
again.@@@1@@@1
6021
Microsoft Office Access cannot build a form or report based on the data returned by the
function object that you have currently selected. @Select a table, query, form, or report, and
try again.@@1@@@1
6022
Application-defined or object-defined error
6023
The Maximum Record Count setting cannot be a negative number.@@@1@@@1
6024
The Maximum Record Count setting cannot contain text - please enter a number.@@@1@@@1
6025
The Requery action cannot be used on a control bound to a Recordset.@@@1@@@1
6026
The RowSourceType property must be set to 'Table/Query' to use this method.@@@1@@@1
6027
Application-defined or object-defined error
6028
The OLE object failed to persist itself. You will not be able to undo this operation.@@@1@@@1
6029
|@@@1@@@1
6030
The current record in |1 |2 must be saved before you can complete this operation.@Do you
want to save the current record in |1 |2?@@3@@@1
6031
You can't modify the structure of table '|', because it is already in use by another person or
process.@@@1@@@1
6032
The value you entered isn't valid for this field.@For example, you may have entered a null
value.@@1@@@1
6033
The '|1' form does not exist.@Enter the name of an existing form in the List Items Edit Form
property of the '|2' control or leave the property empty.@@1@@@1
6034
This property is only available for attachment controls bound to attachment
fields.@@@1@@@1
6035
Layout view is unavailable for this |.@@@1@@@1
6036
You cannot add a form to another form that shows multiple items.@@@1@@@1
6037
This object was saved in an invalid format and cannot be read.@@@1@@@1
6038
Microsoft Office Access was not able to update the value list.@The table may be locked by
another user, it may be read-only, or you may not have permission to modify the
table.@@1@@@1
6039
Do you want to save the datasheet so that it will be available for use by other forms and
reports?@@@33@1@151798@4
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 65 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
6040
Because dependency checking is not enabled on this database, Access cannot verify whether
this datasheet is used on other forms or reports.@Do you want to save the datasheet so that
it will be available for use by other forms and reports?@@33@1@151798@4
6041
Grouping information can only be changed in Layout View and Design
View.@@@1@2@5054@1
6042
Deleting the |1 control will permanently remove filter, grouping, or sort order settings that are
based on the control from the form or report. Are you sure you want to delete the |1
control?.@@@20@1@5833@4
6043
Deleting the selected controls will permanently remove filter, grouping, or sort order settings
that are based on those controls from the form or report. Are you sure you want to delete the
controls?.@@@20@1@5833@4
6044
You will not be able to undo the creation or deletion of this object.@Do you still want to
continue?@@20@1@@4
6045
Microsoft Office Access cannot save the form or report, because it displays characters from a
language that cannot be saved in your current system locale.@Switch your system locale to
the language in the form or report, and then try again.@@1@2@5054@1
6046
Your changes cannot be saved because the field '|' has been updated by another
user.@@@1@@@1
6047
The number of fields from your currently selected table or query exceeds the maximum height
in Microsoft Office Access forms.@Microsoft Office Access will create a new form with no fields
and open the field list so you can individually select fields to add to this object.@@3@@@2
6048
The number of fields from your currently selected table or query exceeds the maximum width
in Microsoft Office Access forms and reports.@Microsoft Office Access will create a new form or
report with no fields and open the field list so you can individually select fields to add to this
object.@@3@@@2
6049
Because databases in the current format do not support the Attachment control, you will not
be able to complete this operation.@@@1@@@1
7700
Microsoft Office Access is unable to complete the operation.@Try the operation again. If the
error persists, restart Microsoft Office Access.@@1@@@1
7701
Microsoft Office Access can't synchronize with Synchronizer '|1.'@A possible reason for the
failure to synchronize with '|1' is that both the Synchronizer and Microsoft Office Access were
trying to write to the current database at the same time.Try synchronizing with '|1'
again.@Do you want to continue synchronizing with the remaining Synchronizers?@19@@@2
7702
The user-supplied function named '|', the program to assist you in resolving conflicts, could
not be found.@Contact the author of this customized database application.@@1@@@3
7703
There are no synchronization conflicts to resolve.@@@1@@@1
7704
You can't modify the design of '|' at a replica.@Design changes to replicated objects can be
made only at the Design Master.Do you want to open it as read-only?@@19@@@2
7705
This member of the replica set has conflicts from synchronizing changes with other
members.@Do you want to resolve these conflicts now?@@19@@@2
7706
Application-defined or object-defined error
7707
Application-defined or object-defined error
7708
'|1' was the last designated Design Master for the replica set. Has '|2' been moved, renamed,
deleted, or corrupted?@You should never have more than one Design Master for each replica
set. Having more than one Design Master in a replica set prevents the members of the set
from synchronizing correctly.@Use Windows Explorer to determine whether the file has been
moved or deleted. Open the file to determine whether it has been corrupted.@13@@@2
7709
To make this replica the Design Master for the replica set, on the Database Tools tab, in the
Database Tools group, click Replication Options, click Synchronize Now, enter the path to '|'
(the current Design Master), and then select the Make ... The Design Master check
box.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 66 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
7710
To make this replica the Design Master for the replica set, first synchronize this replica with all
other replicas in the set.@This ensures that this replica includes all design changes made at
the previous Design Master.If you have already synchronized this replica, do you want to
make it the Design Master?@@19@@@2
7711
This member of the replica set is now the Design Master. Microsoft Office Access will now close
and reopen the database in order for the changes to take effect.@@@1@@@1
7712
This member of the replica set has exceeded the maximum number of days allowed between
synchronizations and can't be synchronized with any other member of the replica set.@Delete
this replica set member and create a new replica.@@1@@@1
7713
This member of the replica set will expire in | days because it has not been synchronized with
another member of the replica set.@If the member is allowed to expire, it can no longer be
synchronized with any other member of the replica set.@You should synchronize this member
with another member as soon as possible. To synchronize, on the the Database Tools tab, in
the Database Tools group, click Replication Options, and then click Synchronize Now.@1@@@1
7714
Microsoft Office Access cannot close the database at this time.@Make sure there is no Visual
Basic code executing in the current database. You may need to run Setup again to properly
install Briefcase Replication.@@1@@@1
7715
Microsoft Office Access cannot complete this operation because it can't find or initialize the
dynamic-link library AceRclr.@Rerun Microsoft Office Access or Microsoft Office Setup again to
reinstall Microsoft Briefcase Replication. During Setup, click Add/Remove, and select Microsoft
Briefcase Replication.If you want to preserve your security or custom settings, back up the
Microsoft Office Access workgroup information file.For information on backing up files, search
the Microsoft Windows Help index for 'backing up files'.@@1@@@3
7716
The database must be closed prior to synchronization.@Do you want Microsoft Office Access to
close the database and synchronize with '|'?@@19@@@2
7717
All open objects must be closed before synchronizing.@Do you want Microsoft Office Access to
close the objects?@@19@@@2
7718
Microsoft Office Access can't synchronize this member of the replica set because one or more
objects are open.@Because synchronizing may involve updating the data in or design of the
database, all objects must be closed before you synchronize.@Close all objects and try
again.@1@@@1
7719
You can't save design changes to '|' at a replica.@Design changes to replicated objects can be
made only at the Design Master.@@1@@@1
7720
You can't save design changes to '|1' at a replica.@Design changes to replicated objects can
be made only at the Design Master. Do you want to save it as a new, local
object?@@19@@@2
7721
You can't delete or rename '|' at a replica.@These operations can't be performed on a replica;
they can be performed only at the Design Master.@@1@@@1
7722
Application-defined or object-defined error
7723
Application-defined or object-defined error
7724
Microsoft Office Access has converted '|1' to the Design Master for the replica set.@Only the
Design Master can accept changes to the database structure; however, data changes can be
made at the Design Master or any replica.@@1@@@1
7725
Microsoft Office Access has converted '|1' to the Design Master for the replica set and has
created a replica at '|2'.@Only the Design Master can accept changes to the database
structure; however, data changes can be made at the Design Master or any
replica.@@1@@@1
7726
Microsoft Office Access has created a replica at '|2'.@@@1@@@1
7727
Microsoft Office Access can't create a replica because this database is already open in
exclusive mode.@Do you want Microsoft Office Access to close the database?@@19@@@2
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 67 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
7728
Microsoft Office Access can't overwrite '|': the replica can't be created at this location.@The
file you are trying to overwrite may be open.@Close any other applications that might be
using this file.@1@@@1
7729
Microsoft Office Access can't make a new replica at '|' because the source has the same path
and file name.@Choose a different path or file name for the new replica.@@1@@@1
7730
The synchronization was completed successfully.@@@1@@@1
7731
Microsoft Office Access cannot synchronize this member of the replica set because it is open in
Exclusive mode. @To open the database in Shared mode, close and reopen the
database.@@1@@@1
7732
'|' is saved as a local table. Changes made to the table will not be sent to the replicas in the
set.@To make this table available to other members of the replica set, close the table, rightclick it in the Navigation Pane, click Table Properties on the shortcut menu, and then select the
Replicated check box.@@1@@@1
7733
The synchronization request has been received, and the Synchronizer will complete the
process as resources become available.@Make sure that the Synchronizer for this member of
the replica set is running. It may be several minutes before the synchronization will
occur.@@1@@@1
7734
Microsoft Office Access has saved the design of table '|,' but it will not be made replicable until
the Table window is closed.@@@1@@@1
7735
Changes to this object can be made only at the Design Master.@Any changes you make will
be discarded when the form is closed.@To save your changes, click the Microsoft Office
Button, point to Save As, and then save the object under a different name.@1@@@1
7736
Application-defined or object-defined error
7737
Microsoft Office Access has converted '|1' to the Design Master for the replica set and has
created a replica at '|2'.@The new replica will not appear in the list of potential
synchronization partners until this database is closed and reopened.@Do you want Microsoft
Office Access to close and reopen the database now?@19@@@2
7738
Microsoft Office Access has successfully created a replica at '|2'.@However, the new replica
will not appear in the list of potential synchronization partners until this database is closed and
reopened.@Do you want Microsoft Office Access to close and reopen the database
now?@19@@@2
7739
Microsoft Office Access has deleted '|' and removed it from the replica set.@This change isn't
reflected until the database is closed and reopened.@Please close and reopen the database
when you are finished synchronizing replicas.@1@@@1
7740
Microsoft Office Access cannot synchronize with a database from a previous version.@Convert
the database you are trying to synchronize with, before synchronizing.@@1@@@1
7741
Microsoft Office Access can't make a new replica at '|' because the value entered for priority is
out of range.@Priority for new replicas should be in the range of 0-100.@@1@@@1
7742
Microsoft Office Access cannot replicate a password-protected database.
7743
Backup, restore, and drop database operations are available only when you have at least
Microsoft SQL Server 2000 installed on your local computer.
7744
Microsoft Office Access can't make a new replica at '|' because the value entered for priority is
out of range.@Priority for anonymous replicas should be 0.@@1@@@1
7745
You can't copy local objects in a replica. Design changes to replicated objects can be made
only at the Design Master.
7746
The Database administrative components failed to load or initialize. Verify that the
components are installed and registered locally.
7747
Database Replicas cannot be converted to prior versions of Microsoft Office Access.
7748
This stage of the conversion process is finished. To complete the conversion process,
synchronize this replica to the (converted) Design Master.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 68 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
7749
Open the Design Master and sync to this replica before opening.
7750
In Datasheet view, you can't set a control property if the control is part of an option
group.@@@1@@@1
7751
In Design view, you can't retrieve the value of the ObjectPalette property for an OLE object
contained in a bound object frame.@Microsoft Office Access doesn't display the OLE object in
the object frame in Design view.@Remove the reference to the ObjectPalette property, or
switch to Form view before you run the macro or Visual Basic code that references the
ObjectPalette property.@1@@@1
7752
Microsoft Office Access cannot apply the filter because all of the records are locked.@Either
the RecordLocks property of the form or report or the Default Record Locking option in the
Advanced section of the Access Options dialog box (click the Microsoft Office Button, and then
click Access Options) is set to All Records.@Reset the value to No Locks or Edited Record, as
appropriate.@1@1@472@1
7753
|@@@1@2@7236@1
7754
You cannot position columns between two frozen columns in a datasheet.@To unfreeze all
columns, on the Home tab, in the Records group, click More, and then click Unfreeze All
Columns.@@1@1@9174@1
7755
Microsoft Office Access can't start the Chart Wizard.@The wizard may not be installed, or this
wizard has been disabled.@To install the Chart Wizard, rerun the Microsoft Office Access or
the Microsoft Office Setup program, click Add/Remove, and then select the Wizards check box.
To reenable this wizard, click the Microsoft Office Button, and then click Access Options. Click
Add-Ins, and then in the Manage list, click Disabled Items, and then click Go.@1@@@3
7756
Application-defined or object-defined error
7757
Application-defined or object-defined error
7758
This ActiveX control isn't enabled in Form view.@You can't set the Enabled or TabStop
properties to True.@@1@@@1
7759
This ActiveX control isn't visible in Form view.@You can't set the Visible or TabStop properties
to True.@@1@@@1
7760
This property is locked and can't be changed.@@@1@@@1
7761
An error occurred when you changed the control.@@@1@@@1
7762
The pattern string is invalid.@@@2@1@10109@1
7763
This feature isn't installed, or has been disabled.@To install this feature, rerun the Microsoft
Office Access or the Microsoft Office Setup program or, if you're using a third-party add-in,
reinstall the add-in. To reenable this wizard, click the Microsoft Office Button, and then click
Access Options. Click Add-Ins, and then in the Manage list, click Disabled Items, and then click
Go.@@1@@@3
7764
Application-defined or object-defined error
7765
Application-defined or object-defined error
7766
This control can't be changed to the type you requested.@@@1@@@1
7767
An error occurred while Microsoft Office Access was creating a section.@@@1@@@1
7768
In order to change data through this form, the focus must be in a bound field that can be
modified.@@@1@@@1
7769
The filter operation was canceled. The filter would be too long.@@@1@@@1
7770
Microsoft Office Access didn't apply the filter.@Microsoft Office Access may not be able to
apply the filter if you entered an invalid data type in one of the fields.Do you want to close
the filter anyway?@If you click Yes, Microsoft Office Access will build the filter, but won't apply
it to the recordset. Then it will close the Filter By Form window.@19@@@2
7771
You can't set the ColumnOrder property when you are in Form view or Print
Preview.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 69 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
7773
Microsoft Office Access can't set the LimitToList property to No right now.@The first visible
column, which is determined by the ColumnWidths property, isn't equal to the bound
column.@Adjust the ColumnWidths property first, and then set the LimitToList
property.@1@1@929@1
7774
You can't set the MenuBar property while an OLE object is in-place active.@@@1@@@1
7775
There are too many controls on the form to allow Filter By Form.@@@1@@@1
7777
You've used the ListIndex property incorrectly.@@@2@1@6997@1
7778
You can't save an object when you are in the Filter By Form window.@Switch to Form view,
and then save the object.@@1@@@1
7779
You cannot set a form's MenuBar property from its menu bar macro.@@1@@@1
7780
You're trying to insert into a section that can't grow enough for the control you're trying to
add.@The maximum total height for all sections in a report, including the section headers, is
200 inches (508 cm).@Remove, or reduce the height of, at least one section. Then try to add
the control again.@1@@@1
7782
You can't create a new instance of this form or report while it is in Design view.@@@1@@@1
7784
The object you have selected is already open for design as a subform or subreport. To open
this object in Design view, select the subform or subreport in the object in which it is already
open, and then on the Design tab, in the Tools group, click Subform in New Window.
7785
Microsoft Office Access didn't build the filter.@There is an error in the current field. Do you
want to close the filter anyway?@If you click Yes, Microsoft Office Access will undo the
changes to the filter, and then close the Filter By Form window.@19@@@2
7788
Application-defined or object-defined error
7789
Type mismatch.@@@1@@@1
7790
Microsoft Office Access can't create the |1.@Either there was an error getting information from
the table or query you selected, or a new |2 could not be created.@@1@@@1
7791
There was an error creating your |1.@Some fields may have been skipped because there was
an error getting information about them or because they didn't fit on the |2.@@1@@@1
7792
You can't open a subform or subreport when it is also open in Design view.@@@1@@@1
7793
You must save the form '|' before you can embed it.@@@1@@@1
7794
Microsoft Office Access couldn't find the toolbar '|'.@@@1@@@1
7795
The custom toolbar '|' is the wrong type (menu, shortcut menu, or toolbar) for the property
it's being used in.@@@1@@@1
7796
The process failed because there is no printer installed.@Because Microsoft Office Access
saves the printer settings with each form or report, a printer is needed to convert, enable,
copy and paste, import, or export your forms or reports. To install a printer: In Microsoft
Windows XP, click Start, and then click Printers and Faxes. Under Printer Tasks, click Add a
printer.In Microsoft Windows 2000, click Start, point to Settings, and then click Printers.
Double-click Add Printer.Follow the instructions in the wizard.@@1@@@1
7797
You must save new objects in the database before you can save them to this external
format.@@@1@@@1
7798
You can only save select, crosstab, and union queries to this format.@@@1@@@1
7799
This form or report is based on a query that exceeds the limit for data in a single
record.@Exclude any unnecessary fields from the query, or change some of the field types to
Memo in the original tables.@@1@@@1
7800
You can't create a Microsoft Office Access MDE database from a database in an old
format.@Close the database and convert it to the current version of Microsoft Office Access.
Then create the MDE database.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 70 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
7801
This database is in an unrecognized format.@The database may have been created with a
later version of Microsoft Office Access than the one you are using. Upgrade your version of
Microsoft Office Access to the current one, then open this database.@@1@@@1
7802
The command you specified is not available in an .mde, .accde, or .ade
database.@@@1@@@1
7803
Microsoft Office Access can't rename |1 to |2. The convert operation failed.@@@1@@@1
7804
Application-defined or object-defined error
7805
This is already an MDE database.@@@1@@@1
7806
This database does not have a Visual Basic project, so it can't be made into an MDE
file.@Open the database in Microsoft Office Access to create the Visual Basic
project.@@1@@@1
7807
You cannot convert the open database to an MDE file by running a macro or Visual Basic
code.@Instead of using a macro or code, on the Database Tools tab, in the Database Tools
group, click Make MDE.@@1@@@1
7808
Microsoft Office Access can't replace an existing file as a result of converting the Microsoft
Office Access database. You must select a new file name.@@@1@@@1
7809
You can't rename a | object in the client/server version of Microsoft Office
Access.@@@1@@@1
7810
You cannot compact the open database by running a macro or Visual Basic code.@Instead of
using a macro or code, click the Microsoft Office Button, point to Manage, and then click
Compact and Repair Database.@@1@@@1
7811
Microsoft Office Access requires Microsoft SQL Server 6.5 or later for Access projects. You
need to upgrade the selected SQL database to Microsoft SQL Server 6.5 or later.@@@1@@@1
7812
Microsoft Office Access projects can only be connected to Microsoft SQL Server
7813
Application-defined or object-defined error
7814
Application-defined or object-defined error
7815
Microsoft Office Access was unable to create an ADE database.@@@1@@@1
7816
Microsoft Office Access requires this Microsoft SQL Server 6.5 installation to be upgraded to
service pack 5 in order to successfully connect to this server. @@@1@@@1
7817
The database file '|' is already open.
7818
Application-defined or object-defined error
7819
You have chosen a database template file that is not supported in the current version of
Microsoft Office Access.@To create a database using the Database Wizard, click the Databases
tab in the New dialog box and then double-click a database icon.@@1@@@1
7820
Application-defined or object-defined error
7821
The TEMP environment variable isn't defined. Microsoft Office Access can't find the temporary
file directory.@@@1@@@1
7822
Microsoft Office Access can't initialize the transfer object. Make sure you have Microsoft SQL
Server or the Microsoft SQL Server Desktop Engine installed on the local
machine.@@@1@@@1
7823
The source or destination database name is missing. The transfer operation can't
continue.@@@1@@@1
7824
The source or destination server name is missing. The transfer operation can't
continue.@@@1@@@1
7825
Microsoft Office Access can't find the server '|'.@@@1@@@1
7826
The database object type isn't supported by the Microsoft Office Access transfer
operation.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
You cannot encode to an open file.@@@1@@@1
fmsinc.com
Page 71 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
7827
The current database '|1' has |2 active connections. Microsoft Office Access must disconnect
all applications before you can copy the database file. What do you want to do to all the active
connections? &Disconnect Cancel@@@35@@@
7828
The object '|' is not a valid Microsoft SQL Server database object. Microsoft Office Access
can't transfer this object.@@@1@@@1
7829
The SQL script used to create database objects is corrupted. Microsoft Office Access can't
create the new objects.@@@1@@@1
7830
The SQL script used to create database object '|' is corrupted. Microsoft Office Access can't
create the new object.@@@1@@@1
7831
Microsoft Office Access can't create the file '|'.@@@1@@@1
7832
The current database '|' is replicated and can't be copied until you disable replication. Use
Microsoft SQL Server Enterprise Manager to remove publications and subscriptions before
copying the database file.@@@1@@@1
7833
The current database '|' has more than one data file and can't be copied.@@@1@@@1
7834
The Transfer Database Wizard didn't provide enough information to perform the transfer
operation.@@@1@@@1
7835
Microsoft Office Access can't copy the database file because one or more objects are open. Do
you want to close all the objects?@@@1@@@1
7836
Microsoft Office Access can't copy the database file because one or more objects are open.
Close all objects and try again.@@@1@@@1
7837
Invalid argument in script.@@@1@@@1
7838
There were errors during the database transfer operation. Open the transfer log file for
details.@@@1@@@1
7839
Errors occurred during the database transfer operation.@@@1@@@1
7840
The database transfer operation failed. The destination database '|' was created and is in an
unknown state. What would you like to do with the destination
database? &Keep &Delete@@@35@@@
7841
The destination file '|' already exists. Set the Overwrite flag to TRUE if you want to replace the
existing file.@@@1@@@1
7842
This operation requires at least Microsoft SQL Server 2000 to be installed on your local
computer.@@@1@@@1
7843
You can only copy a database that is on your local computer. To make a copy of a database on
a remote computer, click the Microsoft Office Button, point to Server Tasks, and then click
Transfer Database.@@@1@@@1
7844
Microsoft Office Access can't copy the database file because there are active connections to
the current database.@@@1@@@1
7845
|@@@1@@@1
7846
Microsoft Office Access can't compact and repair the current database.@@@1@@@1
7847
'|' already exists. Microsoft Office Access must create a backup of your file before performing
the repair operation. Enter a name for the backup file.@@@1@@@1
7848
The transfer operation has been cancelled. The destination database '|' was created and is in
an unknown state. What would you like to do with the destination
database? &Keep &Delete@@@35@@@
7849
The repair operation has been canceled because Microsoft Office Access could not create a
backup of the file. You might not have adequate permissions or enough disk space to create
the backup file. To repair the file manually, click the Microsoft Office Button, point to Manage,
and then click Compact and Repair Database.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 72 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
7850
The wizard you've requested is not installed or is in a bad state. Please install or reinstall the
wizard. If you do not have permission to do this on your computer, please contact your help
desk representative.@@@1@1@153723@1
7851
The toolbar name '|' you entered already exists.@Enter a unique name for this
toolbar.@@1@@@1
7852
The toolbar name '|' you entered doesn't follow Microsoft Office Access object-naming
rules.@For more information about naming objects, click Help.@@2@1@11734@1
7853
The default column width must be at least 0.1 inch.@@@1@@@1
7854
You can't export database objects (except tables) from the current version of Microsoft Office
Access to earlier versions of Microsoft Office Access.@@@1@@@1
7855
You must have a database open to create custom toolbars, and the database can't be readonly.@@@1@@@1
7856
'|' cannot be imported, exported, or copied to Access project files.@@@1@@@1
7858
The Tab Width setting in the Options dialog box (Tools menu) for the Module or Debug window
must be from 1 through 32.@@@1@@@1
7859
Microsoft Office Access can't start because there is no license for it on this machine.
7860
The profile '|' that you specified on the command line doesn't exist in the Windows
Registry.@@@1@@@1
7861
'|' cannot be imported, exported, or copied to Access database files.@@@1@@@1
7862
Microsoft Office Access can't find the wizard. This wizard has not been installed, or there is an
incorrect setting in the Windows Registry, or this wizard has been disabled. @To reenable this
wizard, click the Microsoft Office Button, and click Access Options. Click Add-Ins, and then in
the Manage list, click Disabled Items, and then click Go. Rerun Microsoft Office Access or
Microsoft Office Setup program to reinstall the wizards. If the missing wizard is not a Microsoft
Office Access wizard, reinstall it using the Add-in Manager.@@1@@@3
7863
Links can only be created between Microsoft Office Access database files.
7864
Application-defined or object-defined error
7865
There is already an existing database with the name you entered. Give the new database a
unique name.
7866
Microsoft Office Access can't open the database because it is missing, or opened exclusively by
another user, or it is not an ADP file.
7867
You already have the database open.
7868
You can't use a SetMenuItem macro action on a default menu.@SetMenuItem is for custom
menus only.@@1@@@1
7869
The SetMenuItem action does not have enough information to be carried out.@An argument is
invalid, or there are not enough arguments.@@1@@@1
7870
Microsoft Office Access can't find the database '|.'@Check the database name (and path, if
specified) to make sure you entered it correctly.@@1@@@1
7871
The table name you entered doesn't follow Microsoft Office Access object-naming rules.@For
more information about naming objects, click Help.@@2@1@11734@1
7872
This recordset is not updatable.
7873
'|' cannot be imported, exported, or copied to another database or project file.@@@1@@@1
7874
Microsoft Office Access can't find the object '|'.@* You misspelled the object name. Check for
missing underscores ( _ ) or other punctuation, and make sure you didn't enter leading
spaces.* You tried to open a linked table, but the file containing the table isn't on the path
you specified. Use the Linked Table Manager to update the link and point to the correct
path.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 73 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
7875
The table '|' already exists.@You created or renamed a table, and then tried to save it. Before
Microsoft Office Access could save the table, another user created or renamed one using the
same name.@@1@@@1
7876
There isn't enough temporary disk space to complete the operation.@Free disk space, and
then try the operation again.For more information on freeing temporary disk space, search
the Microsoft Windows Help index for 'disk space, freeing'.For information on compacting a
database to free disk space, click Help.@@2@1@9009@3
7877
Microsoft Office Access can't sort on the Memo, OLE Object, or Hyperlink '|'.@The ORDER BY
clause of an SQL statement can't include any Memo, OLE Object, or Hyperlink
fields.@@1@@@1
7878
The data has been changed.@Another user edited this record and saved the changes before
you attempted to save your changes.@Re-edit the record.@1@@@1
7879
An invalid IDA has been passed to Microsoft Office Access error handling.@Please report this
error and the steps that caused it.@@1@@@1
7880
The value you entered is the wrong data type for this field.@Enter an integer.@@1@@@1
7881
The Macro Conversion Wizard can't be started.@This wizard may not be installed, or this
wizard has been disabled.@To reenable this wizard, click the Microsoft Office Button, and then
click Access Options. Click Add-Ins, and then in the Manage list, click Disabled Items, and then
click Go. Rerun Microsoft Office Access or the Microsoft Office Setup program to reinstall this
wizard. If you want to preserve your security or custom settings, back up the Microsoft Office
Access workgroup information file.For more information on backing up files, search for
'backing up files' in Microsoft Windows Help.@1@@@3
7882
You can't convert, enable, or encode an Access Project file.@@@1@@@1
7883
You can't set the MenuBar property unless a database is open.@@@1@@@1
7884
You can't export an object to itself.@Select a different database to export to, or give the
object a new name.@@1@@@1
7885
Application-defined or object-defined error
7886
Microsoft Office Access can't find the dynamic-link library (DLL) Mso.@Rerun the Microsoft
Office Access or Microsoft Office Setup program.@@1@@@3
7887
A unique record identifier can't consist of more than 10 fields.@@@1@@@1
7888
You must set the default font size to a number from |1 through |2.@For more information on
the FontSize property, click Help.@@2@2@5477@1
7889
The file '|' does not exist.@@@1@@@1
7890
The file '|' doesn't contain any data.@You can't import from, or link to, an empty
spreadsheet.@@1@@@1
7891
Application-defined or object-defined error
7892
An error occurred while saving module options.@You may be running Visual Basic in break
mode.@Reset the running code before changing the module options.@1@@@1
7893
You cannot import objects into a database created in an earlier version of Microsoft Office
Access.@To convert the database to the current version of Microsoft Office Access, click the
Microsoft Office Button, and then click Convert@@1@1@9029@1
7895
Microsoft Office Access was unable to create a window.@The system is out of resources or
memory.@Close unneeded programs and try again.For more information on freeing
memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@1@@@3
7896
Error '|' in the validation rule.@@@2@1@687@1
7897
Error '|' in the default value.@@@2@1@2264@1
7898
Execution of this application has stopped due to a run-time error.@The application can't
continue and will be shut down.@@1@@@3
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 74 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
7899
Microsoft Office Access can't be started.@Microsoft Office Access was unable to initialize the
Windows Registry.@Rerun Microsoft Office Access or Microsoft Office Setup to reinstall
Microsoft Office Access.@1@@185309@3
7900
Microsoft Office Access can't convert the database because it can't create an error
table.@@@1@@@1
7901
Microsoft Office Access can't convert the database because it can't write to the error
table.@@@1@@@1
7902
Errors occurred converting |1 validation rules and default values.@See error table '|2' for a list
of errors.@@1@@@1
7903
Microsoft Office Access can't insert this field.@There are too many fields in the table. The limit
is 255.@@1@@@1
7904
An error occurred in the Field Builder.@You've replaced or modified the default Field Builder,
and Microsoft Office Access is unable to run the new version. Reinstall Microsoft Office Access
to correct the error.@@1@@185309@1
7905
Microsoft Office Access can't change these field data types.@Some data in this table violates
the record validation rule.@Before any data types can be changed, remove the record
validation rule or correct the data.@1@@@1
7906
Microsoft Office Access couldn't launch the Lookup Wizard, or this wizard has been
disabled.@Rerun the Microsoft Office Access or the Microsoft Office Setup program, click
Add/Remove, and select the Wizards check box. To reenable this wizard, click the Microsoft
Office Button, and then click Access Options. Click Add-Ins, and then in the Manage list, click
Disabled Items, and then click Go.@@1@@@1
7907
You don't have permission to modify the design of this table.@For more information on
permissions and who can set them, click Help.@@2@1@10222@1
7908
You can't modify this table now because someone else is using it.@@@1@@@1
7909
Microsoft Office Access can't add another column to this table.@You can have up to 255
columns in your table.@@1@@@1
7910
Microsoft Office Access can't delete this column.@Tables must have at least one
column.@@1@@@1
7911
Microsoft Office Access can't delete this index.@This table participates in one or more
relationships.@Delete its relationships in the Relationships window first.@1@@@1
7912
Once you save the change to the data type of this column, you will not be able to change back
to the previous data type.@Are you sure you want change the data type?@@20@@@2
7913
You can't change a random-valued AutoNumber field to an incremental AutoNumber
field.@The values of random-valued AutoNumber fields aren't continuous.@@1@@@1
7914
You can't convert ReplicationID values to other data types.@@@1@@@1
7915
You can't delete the field '|'; it is a replication system field.@Use a make-table query to create
a new table that contains all the fields in the table except system fields. For information on
make-table queries, click Help.@@2@1@9993@1
7916
Microsoft Office Access is unable to start the Lookup Wizard.@The Lookup Wizard doesn't
apply to fields of this data type.@@1@@@1
7917
'|' cannot be created because the project is disconnected.@To connect the project to a
database, click Connection under Server Tasks on the File menu.@@1@@@1
7918
Application-defined or object-defined error
7919
The default data type you selected is not supported in all versions of Microsoft SQL Server.@If
the server doesn't support the data type you have chosen, the varchar data type will be used
in its place.@@1@@@1
7920
The '|' lookup column was changed to store multiple values. You cannot reverse this
setting.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 75 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
7921
You have changed the '|' lookup column to store multiple values. You will not be able to undo
this change once you save the table.@Do you want to change '|' to store multiple
values?@@19@@@2
7922
You have changed the '|' lookup column to be displayed by a text box. After you save the
table, this change will make the column read-only and lose the lookup properties.@Do you
want to change '|' to be displayed by a text box?@@19@@@2
7923
The data type for field '|' is of type Attachment and cannot be changed.@@@1@@@1
7924
You cannot set '|' to the Attachment data type. You can only set a column to the Attachment
data type when that column is first created.@@@1@@@1
7925
The table or query you are exporting contains more than one attachment column. Microsoft
Windows SharePoint Services only supports one attachment column. Remove all but one
attachment column, and then retry exporting the table or query.
7926
You can't change the column '|' to store multiple values; it is part of a multiple column
relationship.@If you want to change the column to store multiple values, first delete the
relationship in the Relationships window.@@1@@@1
7927
You can't change the column '|' to store multiple values; it is part of an enforced
relationship.@If you want to change the column to store multiple values, first delete the
relationship in the Relationships window.@@1@@@1
7950
Application-defined or object-defined error
7951
You entered an expression that has an invalid reference to the RecordsetClone property.@For
example, you may have used the RecordsetClone property with a form or report that isn't
based on a table or query.@@1@1@7393@1
7952
You made an illegal function call.@Check the syntax of the function you are trying to
use.@@1@@@1
7953
The value you entered doesn't match the type required.@* The variable, property, or object
may not be of the correct type.* You may have used an If TypeOf construct with something
other than a control.@@1@@@1
7954
The expression you entered requires the control to be in the active window.@Try one of the
following:* Open or select a form or report containing the control.* Create a new control
in the active window, and try the operation again.@@1@@@1
7955
There is no current code context object.@@@1@@@1
7956
The syntax of the subquery in this expression is incorrect.@Check the subquery's syntax and
enclose the subquery in parentheses.@@2@1@9989@1
7957
Application-defined or object-defined error
7958
Application-defined or object-defined error
7959
Application-defined or object-defined error
7960
There was an error compiling this function.@The Visual Basic module contains a syntax
error.@Check the code, and then recompile it.@1@@@1
7961
Microsoft Office Access can't find the module '|' referred to in a macro expression or Visual
Basic code.@The module you referenced may be closed or may not exist in this database, or
the name may be misspelled.@@1@@@1
7962
The index number you used to refer to the module is invalid.@Use the Count property to count
the open modules and make sure that the module number is not greater than the number of
open modules minus 1.@@1@@@1
7963
Microsoft Office Access can't run the macro or callback function '|'.@Make sure the macro or
function exists and takes the correct parameters.@@1@@@1
7964
You entered an expression that has an invalid reference to the Recordset property.@You can
only use a dynaset or snapshot recordset to set this property.@@1@1@7393@1
7965
The object you entered is not a valid Recordset property.@For example, you may have used a
forward-only recordset, or tried to set it to null.@@1@1@7393@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 76 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
7966
The format condition number you specified is greater than the number of format
conditions.@Use the Count property to count the format conditions for the control and then
check that the format condition number you cite is within the range of existing format
conditions.@@1@@@1
7967
A required minimum or maximum value is missing.@@@1@@@1
7968
The format condition Type you specified is invalid.@Valid values for the Type property are 0 to
2 for the first condition, and 0 to 1 for all other format conditions.@@1@@@1
7969
The format condition Operator you specified is invalid.@Valid values for the Operator property
are 0 to 7.@@1@@@1
7970
Application-defined or object-defined error
7971
Microsoft Office Access can't follow the hyperlink to '|'.@Please verify the
destination.@@1@@@1
7972
Microsoft Office Access encountered an error while trying to show the Hyperlink
dialog.@@@1@@@1
7973
Application-defined or object-defined error
7974
Microsoft Office Access failed to insert a hyperlink at the current location.@@@1@@@1
7975
You chose an invalid control type for use with hyperlinks.@You can only use hyperlinks with
labels, images, command buttons, or bound text boxes.@@1@@@1
7976
There is no stored hyperlink in this control.@@@1@@@1
7977
Microsoft Office Access is unable to paste the data on the clipboard as a
hyperlink.@@@1@@@1
7978
Microsoft Office Access is unable to add the current hyperlink to the favorites
folder.@@@1@@@1
7979
You can't use the hyperlink property builder with more than one control selected.@@@1@@@1
7980
The HyperlinkAddress or HyperlinkSubAddress property is read-only for this
hyperlink.@@@1@@@1
7981
The values for 'File or web page name' and/or 'Text to Display' are too long.@The values will
be truncated. To keep your original values, click Cancel in the Edit Hyperlink
dialog.@@1@@@1
7982
Application-defined or object-defined error
7983
Microsoft Office Access can't follow the hyperlink.@@@1@@@1
7990
You entered an invalid project name.@You may have deleted the default project name and
forgotten to specify a new one.@@1@@@3
7991
The Microsoft Office Access Source Code Control Add-in is not available; this object will be
opened read-only.@@@1@@@3
7992
The Microsoft Office Access Source Code Control Add-in could not be started.@@@1@@@3
7993
The object | is currently checked in and is therefore read-only.@To modify the object, close it
first, then check it out and reopen it.@@1@@@1
7994
There was a problem communicating with the Source Code Control Add-in.@@@1@@@3
7995
The menus on your form or report that are based on Microsoft Office Access macros will not be
visible while the Customize dialog box is open.@To have the full power of menu or toolbar
customization, convert your macro-based menus to menus or toolbars. With the macro
selected in the Navigation Pane, point to Macro on the Tools menu, and create a menu, a
toolbar, or a shortcut menu from that macro.@@1@@@1
7996
Microsoft Office Access could not create the Data and Misc. objects because the linked table '|'
could not be found.@To create the data and miscellaneous objects, use the Linked Table
Manager (on the Database Tools tab, in the Database Tools group) to update the link to the
source table or file, or delete the link from your current database.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 77 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
7997
You can't save the standard module '|' over a class module with the same name.@Save the
standard module to a different name, or delete the class module first.@@1@@@1
7998
You can't save the class module '|' over a standard module with the same name.@Save the
class module to a different name, or delete the standard module first.@@1@@@1
7999
Microsoft Office Access can't delete this relationship because you don't have the Data and
Misc. Objects checked out.@Check out the Data and Misc. Objects and then delete the
relationship.@@1@@@1
8000
The name you entered already exists for another object of the same type in this
database.@Do you want to replace the existing |?@@20@@@2
8001
'|' has been changed since the last time you opened it, either by another user or because
another instance of it was opened on your own machine.@Do you want to replace the changes
that you or another user made?@* To save your most recent changes and discard the other
user's changes or your previous changes, click Yes.* To save this version of the object with
another name, click No.@19@@@2
8002
Application-defined or object-defined error
8003
You must save the | before you can create a new object based on it.@Do you want to save the
| and create a new object?@@13@@@2
8004
The layout of '|' has been changed since the last time you opened it, either by another user or
because another instance of it was opened on your own machine.@Do you want to replace the
changes that you or another user made?@* To save your most recent changes and discard
the other user's changes or your previous changes, click Yes.* To cancel saving this version
of the object, click No.@19@@@2
8005
Application-defined or object-defined error
8006
The name you entered already exists for another object of the same type in this
database.@Do you want to replace the existing |? You will not be able to undo this
operation.@@20@@@2
8007
You cannot get into Exclusive Mode right now because this database is opened by other users
or because you do not have permissions to open exclusively.@@@1@@@1
8008
The stored procedure executed successfully but did not return records.
8050
Do you want to save changes to the design of |?@@@13@@@2
8051
Application-defined or object-defined error
8052
Do you want to delete the | and empty the Clipboard?@You tried to delete a database object
that is currently on the Microsoft Office Access Clipboard. If you delete it from your database,
you won't be able to paste it later.@@20@@@2
8053
Do you want to delete the |? Deleting this object will remove it from all groups.@For more
information on how to prevent this message from displaying every time you delete an object,
click Help.@@21@1@9058@2
8054
Do you want to exit Microsoft Office Access and empty the Clipboard?@@@19@@@2
8055
Microsoft Office Access can't change the working directory to '|.'@Verify that the drive is valid
and the path is 260 characters or less in length.@@1@@@1
8057
|
8058
Do you want to save changes to the layout of |?@@@13@@@2
8059
Do you want to remove the link to the |?@If you delete the link, you delete only the
information Microsoft Office Access uses to open the table, not the table itself.@@19@@@2
8060
The toolbar '|' is partly unreadable.@ Microsoft Office Access can't display all the toolbar
buttons. The specified toolbar may be in a different format than the toolbars in the current
version of Microsoft Office Access.@Click OK to close the dialog box, and then add the buttons
missing from the toolbar. Microsoft Office Access will then update the toolbar to the latest
format.@1@1@10064@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 78 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
8061
Are you sure you want to restore the default settings to the built-in toolbar or menu bar |?@If
you previously customized, moved, changed the visibility, or otherwise altered the toolbar or
menu bar, or any of the menus that cascade from it, Microsoft Office Access removes your
changes, returns the original buttons to their original order, and shows or hides the toolbar
based on the original setting.To return the built-in toolbar or menu bar to its original state,
click Yes.@@19@@@2
8063
The source application is not responding. Do you want to continue waiting?@The DDE channel
has been established, but the data exchange was not completed in the amount of time
specified in the OLE/DDE Timeout setting in the Access Options dialog box (click the Microsoft
Office Button and then click Access Options).@* To continue waiting for the data exchange to
be completed, click Yes.* To cancel the data exchange and try again later, click No
.@20@@@2
8064
This linked table has indexes that use an unsupported sort order.@If you modify this table,
the Microsoft Office Access database engine can't correctly maintain the table's indexes. As a
result, your data may appear in the wrong order, and functions that use the table's indexes
may have unexpected results.@Try one of the following:* Cancel this operation. Use the
application in which the table was created to re-create the indexes, making sure to specify an
ASCII or International sort order. Then try again to link the tables.* Use this table on a readonly basis.@1@1@9057@1
8065
You can't delete the table '|' until its relationships to other tables have been deleted.@Do you
want Microsoft Office Access to delete the relationships now?@@19@@@2
8067
Do you want to permanently delete the |?@If you click Yes, you won't be able to undo the
deletion.@@19@@@2
8069
Microsoft Office Access couldn't create the custom toolbar '|.'@@@1@@@3
8071
Would you like to remove the compacted database from Source Code Control?@@@19@@@2
8072
Microsoft Office Access must close the | in order to complete this operation.@Would you like
Microsoft Office Access to close it now?@@19@@@1
8073
You do not have the | checked out.@Microsoft Office Access can't check out an object while it
is open, and you can't make design changes until you check it out.@If you want to make
design changes to this object, first close it, check it out, and then reopen it.@1@@@1
8074
Microsoft Office Access must save the | in order to complete this operation.@Would you like
Microsoft Office Access to save it now?@@19@@@1
8075
You do not have the Data and Misc. Objects checked out. You can't create a new table or save
changes to a data access page.@@@1@@@1
8076
To import tables, relationships, menus, toolbars, import/export specs or data access pages
you must have the Data and Misc. Objects checked out.@@@1@@@2
8077
Are you sure you want to cut the |?@@@19@@@2
8078
This object will be removed from your local database, but not from source code control.@The
next time you get this database from source code control, the object will reappear. Are you
sure that you want to delete the local object?@@20@@@2
8079
Microsoft Office Access was not able to add a reference to the type library for this control
because Data and Misc. Objects is not checked out.@Check out the Data and Misc. Objects
and add a reference to the library '|'.@@1@@@1
8080
An error occurred while trying to create the linked table '|'.@Check to make sure that the
source table or file is available, and then retry the operation on the Data and Misc.
Objects.@@1@@@1
8081
You have set |1's Type property to Popup, which changes the toolbar to a shortcut
menu.@The shortcut menu disappears because Microsoft Office Access adds |2 to the
Shortcut Menus toolbar. To complete the shortcut menu, close the Toolbar Properties sheet,
display the Shortcut Menus toolbar, click the Custom category, and then add the commands
you want.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 79 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
8082
Microsoft Office Access must save the | to the current database in order to complete this
operation.@Would you like Microsoft Office Access to save it now?@@19@@@2
8086
An error occured trying to add one or more references from the source code control
project.@The library may not be registered on your computer. Check your project references
and add any missing references after registering the missing components that this database
requires.@@1@@@1
8087
Restoring a database requires that no one is currently using the database.@Do you want to
close all objects, select a backup file, and restore the database from backup?@@19@@@2
8088
Dropping a database requires that no one is currently using the database.@Do you want to
close all open objects, and drop the database?@@19@@@2
8090
Are you sure you want to delete the conflict table |?@You will not be able to undo this
operation.@@19@@@2
8091
This database is enabled for publication.@Do you want to delete existing publications and drop
the database?@@19@@@2
8092
Access could not save your project.@Do you want to cancel the close operation?*To cancel
the close operation, click Yes.*To close without saving, click No.@@19@@@2
8093
Application-defined or object-defined error
8094
Application-defined or object-defined error
8095
Application-defined or object-defined error
8096
Microsoft Office Access can't change the working directory to '|.'@Please enter a non-Internet
location.@@1@@@1
8097
The connection string of this page specifies an absolute path. The page might not be able to
connect to data through the network. To connect through a network, edit the connection
string to specify a network (UNC) path.@&Don't show this warning again@553714119@@@@1
8098
Your computer has resumed operation after Critical Suspend mode. Any unsaved changes
might have been lost. To ensure proper operation, close and reopen any files. Restarting
Microsoft Office Access is recommended.@@@1@@@1
8100
The report is still more than one page wide.@To fit the report on one page decrease the report
width or increase the page width.@You can decrease the report width by selecting each
control that is farthest to the right, moving it to the left, and removing the extra report space.
You may need to repeat this multiple times.You can increase the page width by adjusting
the page setup options.@1@@@1
8101
The report is still more than one page wide.@To fit the report on one page decrease the report
width or increase the page width.@You can decrease the report width by selecting each
control that is farthest to the left, moving it to the right, and removing the extra report space.
You may need to repeat this multiple times.You can increase the page width by adjusting
the page setup options.@1@@@1
8103
Do you want to discard the pending changes and delete the link to the list |?@The linked list
you are attempting to delete has changes that have not been saved to the server. Do you still
want to delete the linked list and lose these pending changes?@@19@@@2
8104
The name you supplied is a reserved word. Reserved words have a specific meaning to
Microsoft Office Access or to the Microsoft Office Access database engine. @If you use a
reserved word, you may receive an error when referring to this field.@@5@1@141675@1
8105
You must close and reopen the current database for the specified option to take effect.
8400
The database '|' is read-only.@You won't be able to save changes made to data or object
definitions in this database.@@3@1@9033@1
8401
You cannot make changes to the database objects in the database '|.'@This database was
created in an earlier version of Microsoft Office Access.@To convert this database to the
current version of Microsoft Office Access, click the Microsoft Office Button, and then click
Convert.@3@1@9029@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 80 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
8402
The file '|' already exists.@Do you want to replace the existing file?If you want to compact
or convert to a different file name, click No. Enter the new file name after the /compact or
/convert option in the command line, and run the command again.@@20@@@2
8403
The setting you entered is invalid.@The database's sort order cannot be updated.The setting
you entered for the New database sort order option (Personalize category) of the Access
Options dialog box (click the Microsoft Office Button and then click Access Options) is not a
valid sort order for the version of the database you are compacting.@@1@@@1
8404
You can't open '|' for exclusive use because another user has the database open or because
you do not have permissions to open exclusively.@Microsoft Office Access will open the
database for shared access.@@3@@@1
8405
This database was created using a previous version of Microsoft Office Access.@- You can
share the database with users of previous versions of Microsoft Office Access, however some
enhancements will be unavailable.- You can open the database, view objects and modify
records using this release of Microsoft Office Access, but design changes will be disabled.To make design changes you must use an earlier version of Microsoft Office Access that
supports the old database format, or upgrade the database.@@1@@@1
8406
Does the first row of your data contain column headings?@@@20@@@1
8407
Application-defined or object-defined error
8408
Application-defined or object-defined error
8409
Microsoft Office Access has made a backup of database |1 at |2. Note: Only server-related
objects have been backed up. To back up your project, click Back Up Project on the File menu
8410
Microsoft Office Access successfully restored database |1 from its backup at |2
8411
Application-defined or object-defined error
8412
The name you entered already exists for another shortcut in this group. @Do you want to
replace the existing shortcut '|?'@@20@@@2
8413
Application-defined or object-defined error
8414
Microsoft Office Access encountered one or more errors during conversion. To view a summary
of these errors, open the '|' table.@@@2@1@553714191@1
8415
The HTML file associated with this link has been moved, renamed, or deleted.@File:
'|' &Update Link... Cancel@@35@@@2
8416
Renaming this user-defined function removes any existing permissions and extended
properties.@Do you want to complete the rename action?@@20@@@2
8417
The file '|' cannot be opened because it has been locked by another user.@Try again when the
file is available.@@3@@@1
8500
A form with a subform object can't have its DefaultView property set to Continuous
Forms.@You tried to add a subform to a form in Design view.Microsoft Office Access will
reset the property to Single Form.@@1@@@1
8501
You can't modify this field because it is read-only.@Some fields, such as a calculated field, are
read-only by design. However, any field can be read-only if its Locked property is set to
Yes.@@1@1@865@1
8502
Microsoft Office Access has reached the end of the records.@Do you want to continue
searching from the beginning?@@19@@@2
8503
Microsoft Office Access has reached the beginning of the records.@Do you want to continue
searching from the end?@@19@@@2
8504
Microsoft Office Access finished searching the records. The search item was not
found.@@@1@@@1
8505
Do you want to continue to search or replace?@@@19@@@2
8506
Application-defined or object-defined error
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 81 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
8507
There isn't enough memory to execute the macro that updates the active filter.@Microsoft
Office Access is closing the Filter window.Close unneeded programs. Then try again to open
the Filter window.For more information on freeing memory, search the Microsoft Windows
Help index for 'memory, troubleshooting'.@@1@@@3
8508
Microsoft Office Access can't find '|.'@The text string you entered in the Find What box can't
be evaluated against the current field.@Reenter the text string so that it conforms to the data
type of the field.@1@@@1
8509
You won't be able to undo this Replace operation.@There isn't enough free memory to use the
Undo command.Do you want to continue?@@19@@@2
8510
Microsoft Office Access can't save the current record.@Do you want to undo the changes to
the record and continue the Paste operation?@@19@@@2
8511
Records that Microsoft Office Access was unable to paste have been inserted into a new table
called '|.'@In the Navigation Pane, open the new table to see the unpasted records.After you
fix the problems that resulted in the paste errors, copy and paste the records from the new
table.@@1@@@1
8512
None of the field names you pasted onto the Clipboard match the field names on the
form.@Microsoft Office Access treats the data in the first row on the Clipboard as field names.
If you copied the data from another application, the first row of data may have taken the place
of the field names.Do you want to paste the field names in the order you defined with the
Tab Order command?@@21@1@11022@2
8513
Some of the field names for the data you tried to paste don't match field names on the
form.@Microsoft Office Access treats data in the first row on the Clipboard as field names. In
this case, some of those field names don't match the field names on the form.Do you want
to paste only that data whose names match the field names on the
Clipboard?@@19@1@11022@2
8514
Do you want to suppress further error messages telling you why records can't be pasted?@If
you click No, a message will appear for every record that can't be pasted.@@13@@@2
8515
You copied a large amount of data onto the Clipboard.@When you copy data onto the
Clipboard, only the reference to the object is copied. If you close the source document,
however, Microsoft Office Access must paste all the data from its source. Depending on the
amount of data, this can take some time.Do you want to save this data on the
Clipboard?@@19@@@2
8516
You selected more records than can be copied onto the Clipboard at one time.@Divide the
records into two or more groups, and then copy and paste one group at a time.The
maximum number of records you can paste at one time is approximately 65,000.@@1@@@1
8517
Do you want to suppress further error messages telling you why records can't be deleted?@If
you click No, a message will appear for every record that can't be deleted.@@13@@@2
8518
You won't be able to undo this Replace operation.@Do you want to continue?@@19@@@2
8519
You are about to delete | record(s).@If you click Yes, you won't be able to undo this Delete
operation.Are you sure you want to delete these records?@@19@@@2
8520
You are about to paste | record(s).@Are you sure you want to paste these
records?@@19@@@2
8521
You won't be able to undo this Delete operation.@The Undo command won't be available
because this operation is too large, or there isn't enough free memory.Do you want to delete
these items?@@19@@@2
8522
All timers are in use.@Set the TimerInterval property back to zero so that you can start
another timer.@@2@1@6342@1
8523
Do you want to delete the custom palette information from this form or report and revert to
the default palette?@@@20@@@2
8524
Do you want to remove this picture from this control?@@@20@@@2
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 82 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
8525
The remote data isn't accessible.@You tried to open a form or report that includes a DDE or
DDESend function in a calculated control that specifies an OLE server application.Do you
want to start the application |?@@19@@@2
8526
Microsoft Office Access encountered a problem while trying to switch views and must close this
window.@@@1@@@1
8527
Do you want to delete the group section for the database object '|' and its contents?@The
group header or footer you want to delete contains controls which will be deleted along with
the section.@@20@@@2
8528
Deleting these sections will also delete all controls in them. You will not be able to undo this
action.@Do you want to delete these sections anyway?@@20@@@2
8529
The grouping level that you are trying to delete has a group header or group footer section.
The section contains controls that will also be deleted.@Do you want to continue?@@20@@@2
8530
Relationships that specify cascading deletes are about to cause | record(s) in this table and in
related tables to be deleted.@Are you sure you want to delete these
records?@@21@1@9096@2
8531
The section width is greater than the page width, and there are no items in the additional
space, so some pages may be blank.@For example, the report width may be wider than the
page width.@@3@@@1
8532
Do you want to remove this picture from the form?@@@20@@@2
8533
Some data may not be displayed.@There is not enough horizontal space on the page for the
number of columns and column spacing you specified.@Click Page Setup on the File menu,
click the Columns tab, and then reduce the number of columns or the size of the
columns.@3@@@1
8534
When you save this form or report, any code behind it will be deleted.@You have set the
HasModule property to No, creating a form or report that opens more quickly. Any macros
associated with this form or report will not be affected, nor will code in separate modules that
is called from this property sheet.@Are you sure you want to do this?@20@@@2
8538
Application-defined or object-defined error
8539
Relationships that specify cascading deletes are about to cause record(s) in this table and in
related tables to be deleted.@Are you sure you want to delete these
records?@@21@1@9096@2
8540
You are about to delete one or more records.@If you click Yes, you won't be able to undo this
Delete operation.Are you sure you want to delete these records?@@19@@@2
8541
Microsoft Office Access could not perform the delete operation. An error occurred during the
delete operation, no records were deleted.
8542
Microsoft Office Access did not detect a relationship between the fields you have chosen. @Do
you want a relationship to be created for you now?@@19@@@3
8543
Application-defined or object-defined error
8544
You won't be able to undo this paste operation.@Do you want to continue?@@19@@@2
8545
Application-defined or object-defined error
8546
Current object must first be saved before exporting data to XML. @Would you like to save '|'
and then continue?@@19@@@2
8547
Do you want to save the changes made to the macro and update the
property?@@@13@1@4309@2
8548
To complete this operation, Access must modify the RecordSource property of the current
form or report.@Access will create a new query and embed it directly into the form's or
report's RecordSource property. The form or report will no longer be based on the '|'
query.@Do you want to accept this change?@19@@@2
8549
This table contains one or more Lookup fields. Display values for Lookup fields cannot be
changed by using the Replace operation.@@@1@1@865@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 83 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
8550
A table or query needed in order to create the new form, report, or query is currently open in
Design view.@Save or discard the changes to this table or query and open it in Datasheet
view, then try again.@@1@@@1
8551
Do you want to remove this picture from the report?@@@20@@@2
9502
Microsoft Office Access won't be able to undo this action or subsequent actions. To make more
resources available so that Access can record further design actions, close and reopen this
window. @Do you want to continue anyway?@@19@@@2
9504
The file '|' is not readable by the Access database engine. @If you think you have a valid
Access database, this is most likely because of the recent file format change. Do you want to
attempt to upgrade the database format?@@19@@@2
9505
Microsoft Office Access has detected that this database is in an inconsistent state, and will
attempt to recover the database. During this process, a backup copy of the database will be
made and all recovered objects will be placed in a new database. Access will then open the
new database. The names of objects that were not successfully recovered will be logged in the
"Recovery Errors" table.@@@1@@@2
9507
Microsoft Office Access was unable to load all the library modules.@@@1@@@1
9508
Microsoft Office Access couldn't close database '|.'@Your last change may not have been
saved because an internal buffer was locked by another user (whose name was given in the
previous message).To avoid losing data, wait for the other user to finish using the record,
and then click OK again.If you click Cancel, you may lose changes that haven't been
saved.@@3@@@2
9509
You can't undo this command and, once it's completed, you won't be able to edit this
object.@Do you want to continue anyway?@@19@@@2
9510
Application-defined or object-defined error
9511
|@@@1@@@1
9512
Application-defined or object-defined error
9513
Microsoft Office Access was unable to completely repair the '|' table and deleted some Memo,
OLE Object, or Hyperlink field values.@To recover the data, restore from your backup copy of
the database.Note that the data in the deleted field may have been damaged by a bad
sector on your hard disk. For more information on checking your disk's surface, files, and
folders for errors, search the Windows Help index for 'checking for disk errors'.@@1@@@1
9514
One or more records were unrecoverable and were deleted from the '|' table.@@@1@@@1
9515
The '|' table was truncated; data was lost.@@@1@@@1
9516
One or more indexes from the '|' table couldn't be repaired and were deleted.@@@1@@@1
9517
The Save As command can't process any subforms contained in your report.@Do you want to
proceed anyway?@@19@@@2
9518
An error occurred while adding this word to the custom dictionary.@* The dictionary file may
be read-only.* There may be a disk error.@@1@@@1
9519
An error occurred while adding this word to the Change All list.@The dictionary may be
full.@@1@@@1
9520
An error occurred while adding the word to the Ignore All list.@The dictionary may be
full.@@1@@@1
9521
The specified word is too large.@Words can't exceed 64 characters.@@1@@@1
9523
Microsoft Office Access can't open the '|' custom dictionary.@@@1@@@1
9524
Microsoft Office Access can't start the spelling checker because it isn't installed.@@@1@@@1
9525
Microsoft Office Access can't open the main dictionary file.@Verify that this file has been
correctly installed.@@1@@@1
9526
The spelling checker only works on text fields that contain text data.@You're trying to check a
field with a data type other than Text or Memo.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 84 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
9527
The spelling checker can't proceed; you must first select data from a table, query, view,
stored procedure, or form.@@@1@@@1
9529
Microsoft Office Access cannot run the spell checker because the data in this form or query is
not updatable.@@@2@1@9932@1
9530
An error occurred while trying to modify the contents of field '|.'@The field may be locked or
read-only, or you may not have permissions to change it. For information on security
permissions and who can change them, click Help.@@2@1@10222@1
9531
Application-defined or object-defined error
9532
The '|' field can't be modified because it's a read-only field.@@@1@@@1
9533
An error occurred while trying to add the word pair to the AutoCorrect list.@@@1@@@1
9534
The current selection does not contain any fields that can be checked for spelling errors.@You
can check the spelling of text box controls with Text or Memo data types.@@1@@@1
9535
You entered an invalid main dictionary.@Please select a valid entry.@@1@@@1
9536
The spelling check is complete.@@@1@@@1
9537
You must restart the spelling checker for the dictionary change to take effect.@@@1@@@1
9538
Application-defined or object-defined error
9539
You have specified a word that isn't found in the main or custom dictionary.@Do you want to
use this word and continue checking?@@20@@@1
9540
Application-defined or object-defined error
9541
The spelling checker can't undo your last change.@The data in field '|' has been modified by
another user. To resume the spelling check, click OK.@@1@@@1
9542
This database must be closed before you can create a replica.@Do you want Microsoft Office
Access to close this database and create the replica?If you proceed, Microsoft Office Access
will close your database and convert it to a Design Master. The database may increase in
size.@@19@@@2
9543
The Hangul Hanja Converter can't proceed. There is no Hangul or Hanja data to
convert.@@@1@@@1
9544
Microsoft Office Access can't register the '|' custom dictionary.@@@1@@@1
9545
After you have converted this file to Access 2002 - 2003 File Format, the new file cannot be
shared with Access 2000 users or Access 97 users.@For more information about conversion,
click Help.@@2@1@553714162@1
9546
Application-defined or object-defined error
9547
After you have converted this file to Access 2000 File Format, the new file cannot be shared
with Access 97 users. @Any functionality specific to Access 2002 or later will not be available
in Access 2000.@For more information about conversion, click Help.@2@1@553714162@1
9548
After you have converted this file to Access 97 File Format, any functionality specific to Access
2000 or later will be lost.@For more information about conversion, click
Help.@@2@1@553714162@1
9549
This Database has been upgraded to the Access 2007 File Format. The new database cannot
be shared with users of Access 2003 or earlier versions.@For more information about
conversion, click Help.@@2@1@553714162@1
9550
The Text Format property of the bound field '|' is not currently Rich Text. You should change
the Text Format property of the table field before you change the property of this control. If
you change the Text Format property of this control to Rich Text before you change the
property of the bound field, some data that is not valid HTML might not be displayed.@Do you
want to continue?@@19@@@2
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 85 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
9551
The Text Format property of the bound field '|' is not currently Plain Text. You should change
the Text Format property of the table field before you change the property of this control. If
you change the Text Format property of this control to Plain Text before you change the
property of the bound field, some data might be displayed as HTML tags.@Do you want to
continue?@@19@@@2
10000
You must first save the table.@Do you want to save the table now?@@19@@@1
10001
You must first save the view.@Do you want to save the view now?@@19@@@1
10002
You must first save the stored procedure.@Do you want to save the stored procedure
now?@@19@@@1
10003
You must first save the query.@Do you want to save the query now?@@19@@@1
10004
Do you want to permanently delete the selected field(s) and all the data in the field(s)?@To
permanently delete the field(s), click Yes.@@19@@@2
10005
There is no primary key defined.@Although a primary key isn't required, it's highly
recommended. A table must have a primary key for you to define a relationship between this
table and other tables in the database.Do you want to create a primary key
now?@@13@@@2
10006
Changing to this data type requires removal of one or more indexes.@You can't use indexes
on fields with a Memo, OLE Object, or Hyperlink data type. If you click Yes, Microsoft Office
Access will delete the indexes that include that field.Do you want to continue
anyway?@@20@@@2
10007
Deleting field '|' requires Microsoft Office Access to delete the primary key.@Do you want to
delete this field anyway?@@19@@@2
10008
Deleting field '|' requires Microsoft Office Access to delete one or more indexes.@If you click
Yes, Microsoft Office Access will delete the field and all its indexes.Do you want to delete this
field anyway?@@19@@@2
10009
Either an object bound to table '|' is open or another user has the table open. Do you want to
open the table as read-only?@To open the table as read-only, click Yes.@To open the table as
read/write, click No, make sure the table and all objects bound to it are closed, and then try
opening it again in Design view.@19@@@2
10010
Table '|' is a linked table whose design can't be modified. If you want to add or remove fields
or change their properties or data types, you must do so in the source database.@Do you
want to open it anyway?@@19@@@2
10011
Microsoft Office Access encountered errors while converting the data.@The contents of fields
in |1 record(s) were deleted.Do you want to proceed anyway?@@19@@@2
10012
Microsoft Office Access cannot retrieve field properties from the system tables.@This database
needs to be repaired. If you click Yes, Microsoft Office Access will open the table in Design
view. The settings of the FieldName, DataType, FieldSize, Indexed, and Primary properties will
remain intact, but the settings of other field properties will be lost.You can attempt to
redefine the lost properties, but we recommend that you restore the database from a backup
copy, or close it and use the Compact and Repair Database command (click the Microsoft
Office Button and point to Manage).Do you want to continue?@@20@@@2
10013
Microsoft Office Access can't save property changes for linked tables.@Do you want to
continue anyway?@@19@@@2
10014
Microsoft Office Access was unable to append all the data to the table.@The contents of fields
in |1 record(s) were deleted, and |2 record(s) were lost due to key violations.* If data was
deleted, the data you pasted or imported doesn't match the field data types or the FieldSize
property in the destination table.* If records were lost, either the records you pasted
contain primary key values that already exist in the destination table, or they violate
referential integrity rules for a relationship defined between tables.Do you want to proceed
anyway?@@22@1@922@1
10015
Changing to this data type requires removal of the primary key.@Do you want to continue
anyway?@@19@@@2
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 86 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
10016
Some data may be lost.@The setting for the FieldSize property of one or more fields has been
changed to a shorter size. If data is lost, validation rules may be violated as a result.Do you
want to continue anyway?@@20@@@2
10017
Your computer is out of disk space.@You won't be able to undo this paste append. Do you
want to continue anyway?@@19@@@2
10018
Microsoft Office Access was unable to append all the data to the table.@The contents of fields
in |1 record(s) were deleted, and |2 record(s) were lost due to key violations.* If data was
deleted, the data you pasted or imported doesn't match the field data types or the FieldSize
property in the destination table.* If records were lost, the records you pasted contain
primary key values that already exist in the destination table, or they violate referential
integrity rules for a relationship defined between tables.@@2@1@922@1
10019
Microsoft Office Access can't find the database containing the linked table '|.'@The properties
set in Microsoft Office Access for the linked table will be lost.Do you want to continue with
the conversion anyway?@@19@@@2
10020
Data integrity rules have been changed; existing data may not be valid for the new
rules.@This process may take a long time. Do you want the existing data to be tested with the
new rules?@@13@@@2
10021
Existing data violates the new record validation rule.@Do you want to keep testing with the
new rule?* To keep the new rule and continue testing, click Yes.* To revert to the old rule
and continue testing, click No.* To stop testing, click Cancel.@@13@@@1
10022
Existing data violates the new setting for the '|1' property for field '|2.'@Do you want to keep
testing with the new setting?* To keep the new setting and continue testing, click Yes.* To
revert to the old setting and continue testing, click No.* To stop testing, click
Cancel.@@13@@@2
10023
Microsoft Office Access deleted | indexes on the converted fields.@Some data did not convert
properly.@@1@@@1
10024
You must save the table first.@Microsoft Office Access can't test your data until you save the
design changes you made.Do you want to save the table now?@@19@@@2
10025
This operation will test the table's record and field validation rules, as well as the Required and
AllowZeroLength properties, for all data in the table.@This process may take a long time.Do
you want to continue anyway?@@19@@@2
10026
All data was valid for all rules.@@@1@@@1
10027
Existing data violates the new record validation rule.@Do you want to continue testing data
with this new rule?* To continue testing for other new rule violations, click Yes.* To
continue to test only the old validation rules, click No.* To stop testing, click
Cancel.@@13@@@2
10028
The existing data violates the '|1' property for field '|2.'@If you continue testing, Microsoft
Office Access will inform you if data violates any other property settings in the table.Would
you like to continue testing?@@19@@@2
10029
Application-defined or object-defined error
10030
There is no primary key defined.@Although a primary key isn't required, it's highly
recommended. A table must have a primary key for you to define relationships between this
table and other tables in the database.Do you want to return to table design and add a
primary key now?@@13@@@2
10031
You must first save the function.@Do you want to save the function now?@@19@@@1
10032
This field will be converted to Plain Text and all the formatting in the field will be removed.@Do
you want to convert the column to Plain Text?@@20@@@2
10033
This field will be converted to Rich Text, and all the data it contains will be HTML encoded.@If
your data already contains valid HTML Rich Text, you can remove any extra HTML encoding by
using the PlainText function in an update query. Do you want to convert the column to Rich
Text?@@20@@@2
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 87 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
10250
You can't print the scrollable (unfrozen) columns on the datasheet.@The frozen columns are
wider than the page. Do you want to print just the frozen columns?@If you want to print the
unfrozen columns, try one or more of the following:* Decrease the column width and
increase the row height of the frozen columns.* Change the page orientation to Landscape
in the printer Properties dialog box.* Decrease the size of the left and right page margins in
the Page Setup dialog box.@21@1@9172@2
10251
The column heading is too tall to fit on the page. Part of the heading will be cut off.@Do you
want to print the incomplete heading?@To prevent headings from being cut off, try one or
more of the following:* Change the page orientation to Portrait in the printer Properties
dialog box.* Decrease the size of the top and bottom page margins in the Page Setup dialog
box.@19@@@2
10252
At least one column is too wide to fit on the page. Data in that column will be cut off.@Do you
want to print the column with incomplete data?@To prevent data from being cut off, try one or
more of the following:* Decrease the column width and increase the row height.* Change
the page orientation to Landscape in the printer Properties dialog box.* Decrease the size of
the left and right page margins in the Page Setup dialog box.@19@@@2
10253
The row height exceeds the space between the top and bottom margins.@Do you want to
print the columns with incomplete data?@To prevent data from being cut off, try one or more
of the following:* Increase the column width and decrease the row height.* Change the
page orientation to Portrait in the printer Properties dialog box.* Decrease the size of the
top and bottom page margins in the Page Setup dialog box.@19@@@2
10500
You are about to run an update query that will modify data in your table.@Are you sure you
want to run this type of action query?For information on how to prevent this message from
displaying every time you run an action query, click Help.@@21@1@9058@2
10501
You are about to run an append query that will modify data in your table.@Are you sure you
want to run this type of action query?For information on turning off confirmation messages
for document deletions, click Help.@@21@1@9058@2
10502
You are about to run a make-table query that will modify data in your table.@Are you sure you
want to run this type of action query?For information on how to prevent this message from
displaying every time you run an action query, click Help.@@21@1@9058@2
10503
You are about to run a delete query that will modify data in your table.@Are you sure you
want to run this type of action query?For information on how to prevent this message from
displaying every time you run an action query, click Help.@@21@1@9058@2
10504
You are about to run a data-definition query that may modify data in your table.@Are you sure
you want to run this type of an SQL query?If not, click No and then modify the query or
close it to run later.@@19@@@2
10505
You are about to update | row(s).@Once you click Yes, you can't use the Undo command to
reverse the changes.Are you sure you want to update these records?@@19@@@2
10506
You are about to append | row(s).@Once you click Yes, you can't use the Undo command to
reverse the changes.Are you sure you want to append the selected rows?@@19@@@2
10507
You are about to paste | row(s) into a new table.@Once you click Yes, you can't use the Undo
command to reverse the changes.Are you sure you want to create a new table with the
selected records?@@19@@@2
10508
You are about to delete | row(s) from the specified table.@Once you click Yes, you can't use
the Undo command to reverse the changes.Are you sure you want to delete the selected
records?@@19@@@2
10509
Microsoft Office Access can't update all the records in the update query.@Microsoft Office
Access didn't update |1 field(s) due to a type conversion failure, |2 record(s) due to key
violations, |3 record(s) due to lock violations, and |4 record(s) due to validation rule
violations.Do you want to continue running this type of action query anyway?To ignore the
error(s) and run the query, click Yes.For an explanation of the causes of the violations, click
Help.@@21@1@10019@2
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 88 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
10510
Microsoft Office Access can't append all the records in the append query.@Microsoft Office
Access set |1 field(s) to Null due to a type conversion failure, and it didn't add |2 record(s) to
the table due to key violations, |3 record(s) due to lock violations, and |4 record(s) due to
validation rule violations.Do you want to run the action query anyway?To ignore the
error(s) and run the query, click Yes.For an explanation of the causes of the violations, click
Help.@@21@1@10020@2
10511
Microsoft Office Access can't add all the records in the update or append query.@It set |1
field(s) to Null due to a type conversion failure.A type conversion failure is caused when the
data in one or more fields doesn't match the DataType or FieldSize property in the destination
table. For example, leaving blank fields in a Yes/No field or entering text in a numeric field will
cause this error.Do you want to ignore the errors and run the update or append query
anyway?To ignore the error(s) and run the query, click Yes.@@19@1@922@2
10512
Microsoft Office Access can't delete |2 record(s) in the delete query due to key violations and
|3 record(s) due to lock violations.@Do you want to run this action query anyway?To ignore
the error(s) and run the query, click Yes.For an explanation of the causes of the violations,
click Help.@@21@1@10016@2
10513
The existing | will be deleted before you run the query.@Do you want to continue
anyway?@@20@@@2
10514
You won't be able to undo the changes this action query is about to make to the data in a
linked table or tables.@Do you want to run this action query anyway?@@19@@@2
10515
Microsoft Office Access was unable to update all the records in the update query.@Microsoft
Office Access didn't update |1 field(s) due to a type conversion failure, |2 record(s) due to key
violations, |3 record(s) due to lock violations, and |4 record(s) due to validation rule
violations.For an explanation of the causes of the violations, click Help.@@2@1@10019@1
10516
Microsoft Office Access can't append all the records to the table.@Microsoft Office Access set
|1 field(s) to Null due to a type conversion failure, and it didn't add |2 record(s) due to key
violations, |3 record(s) due to lock violations, and |4 record(s) due to validation rule
violations.For an explanation of the causes of the violations, click Help.@@2@1@10020@1
10517
Microsoft Office Access can't add all the records in the make-table query.@It set |1 field(s) to
Null due to a type conversion failure.A type conversion failure is caused when the data in
one or more fields doesn't match the DataType or FieldSize property in the destination table.
For example, leaving blank fields in a Yes/No field or adding text in numeric field will cause this
error.@@1@1@922@1
10518
Microsoft Office Access can't delete all the records in the delete query.@Microsoft Office
Access didn't delete |2 record(s) due to key violations and |3 record(s) due to lock
violations.For an explanation of the causes of the violation, click Help.@@2@1@10016@1
10519
There isn't enough disk space or memory to undo the data changes this action query is about
to make.@Do you want to run this action query anyway?For information on freeing disk
space or freeing memory, search the Microsoft Windows Help index for 'disk space, freeing' or
'memory, troubleshooting'.@@19@@@2
10520
Do you want to save the changes made to the SQL statement and update the property?@The
RecordSource or RowSource property contained an SQL statement when you invoked the
Query Builder, so the original SQL statement was modified.@To close the Query Builder
without changing the original SQL statement, click No.@13@1@4309@2
10521
Do you want to save the changes made to the query and update the property?@The
RecordSource or RowSource property contained the name of a query when you invoked the
Query Builder, so the original query was modified.@To close the Query Builder without
changing the original query, click No.@13@1@4309@2
10522
You invoked the Query Builder on a table.@Do you want to create a query based on the
table?@@19@@@2
10523
You are about to run a pass-through query that may modify data in your table.@Are you sure
you want to run this type of an SQL query?For information on how to prevent this message
from displaying every time you run an SQL query, click Help.@@21@1@9058@2
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 89 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
10524
| output column(s) in the query were unnamed and will not show any data.@@@1@@@1
10526
Do you want to save the changes made to the SQL Statement and update the text
editor?@The Stored Procedure or Function contained an SQL statement when you invoked the
Query Builder, so the original SQL statement was modified.@To close the Query Builder
without changing the original SQL statement, click No.@13@1@4309@2
10600
Are you sure you want to permanently delete the selected relationship from your
database?@@@19@@@2
10601
A relationship already exists.@Do you want to edit the existing relationship? To create a new
relationship, click No.@@13@@@2
10602
The field name is missing in row |.@You haven't selected a matching field for this relationship
in each row of the grid.@Select fields so that the grid has the same number of fields on the
left and right sides, and then try to create the relationship again.@1@@@1
10603
This relationship has been modified or deleted by another user since you opened the
Relationships window.@Do you want to edit the relationship and overwrite the other user's
changes? To update your Relationships window to include the other user's changes, click
No.@@19@@@2
10604
This relationship has already been deleted by another user.@To update your view, click
OK.@@1@@@1
10605
The layout of the Relationships window will be cleared.@Do you want to
continue?@@19@@@2
10606
You cannot display queries or linked tables in the Relationships window for this database.@The
database '|' was created in an earlier version of Microsoft Office Access.To convert this
database to the current version of Microsoft Office Access, click the Microsoft Office Button,
and then click Convert.@@3@1@9029@1
10607
The relationship has been created as a one-to-many relationship because there are duplicate
entries in the related field.@You've tried to create a one-to-one relationship, but the data in
the tables suggests that a one-to-many relationship is more appropriate.@@2@1@11617@1
10608
To create a relationship, use the mouse to drag a field from one table to
another.@@@1@@@1
10700
This document was previously formatted for the printer |1 on |2, but that printer isn't
available. Do you want to use the default printer |3?@@@19@@@1
10701
This document was previously formatted for the printer '|1 on |2', but that printer isn't
available. The page settings shown in the Print Setup dialog box are for the current default
printer '|3'.@Do you want to continue?@@19@@@1
10702
Previewing or printing this PivotTable view might take a long time because it displays a large
amount of detail data. Microsoft Office Access might not respond for some time.@Do you
want to continue?@* To reduce the amount of time required, hide most or all of the detail
data in the view.* For more information, consult Microsoft Knowledge Base article
Q282315.@3@@@1
10750
You must save the macro before you run it.@Do you want to save the macro now?* To save
the macro and then run it, click Yes.* To return to the Macro window for this macro or to the
window you executed the Run Macro command from, click No.@@19@@@2
10751
Some of the macro actions you are trying to save cannot be performed in Access 97. These
actions will be permanently deleted from the macro in the Access 97 version of your
database.@@@1@@@1
10800
Microsoft Office Access finished adding the index '|.'@Add another index from the Select Index
Files dialog box, or click Close.@@1@@@1
10801
The Microsoft Office Access index information (.inf) file for '|' already exists.@Do you want to
replace the existing Microsoft Office Access .inf file for the dBASE or Microsoft FoxPro file
you're linking?@* To create a new .inf file, click Yes.* To use the existing file, click No.If
the .inf file contains invalid or outdated information, you must click Yes to create a new .inf file
before you can link the table.@17@1@9186@2
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 90 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
10803
The object '|' already exists.@Do you want to replace the existing object with the one you are
exporting?If you want to export this object without replacing the existing object, click No.
You can then choose a new name in the Export dialog box.@@20@@@2
10804
Not all of the import specifications could be imported due to name conflicts. Conflicts existed
in | of the specifications.@Rename the conflicting import specifications, and try the import
operation again.@@1@@@1
10805
Application-defined or object-defined error
10806
Related data is not supported with the live data option.
10807
Please specify XML export location.
10808
The current record was not unique. All identical records were exported.
10892
A form with a bound ActiveX control or an embedded object bound to a data source can't have
its DefaultView property set to Continuous Forms.@You tried to add a bound ActiveX control to
a form in Design view.Microsoft Office Access will reset the DefaultView property to Single
Form.@@1@@@1
10893
Application-defined or object-defined error
10894
Application-defined or object-defined error
10895
Application-defined or object-defined error
10896
You have chosen to permanently delete the link to the data access page.@ Delete
&Link Cancel@@27@@@
10897
|@There is a problem with Internet Explorer registry settings.@Please reinstall Internet
Explorer.@1@@@1
10898
Microsoft Office Access data access pages can only be viewed in Windows Internet Explorer,
but it is not your default Browser.@Do you want to open Internet Explorer to view this
page?@@19@@@
10899
A link to this data access page could not be created because the Data and Misc. Objects are
not checked out.@@@1@@@1
10900
Application-defined or object-defined error
10901
Application-defined or object-defined error
10902
Application-defined or object-defined error
10903
Application-defined or object-defined error
10904
Application-defined or object-defined error
10905
Application-defined or object-defined error
10950
Are you sure you want to delete this account?@You can't undo the deletion of a user or group
account. To restore a user or group account that has been deleted, you must recreate the
account using the same name and personal identifier (PID).@@20@@@2
10951
You don't have permission to modify '|.'@To modify this object, you must have Modify Design
permission for it. If the object is a table, you must also have Delete Data and Update Data
permissions for it.Do you want to save a copy of the object as a new
object?@@21@1@10222@1
10952
You don't have permission to view this macro.@To view a macro, you must have Read Design
permission for it.Do you want to continue to run the macro?@@21@1@10222@2
10953
You don't have permission to modify '|.'@To modify this object, you must have Modify Design
permission for it. If the object is a table, you must also have Delete Data and Update Data
permissions for it.Do you want to open it as read-only?@@21@1@10222@1
10954
You changed the permissions of '|1' for '|2.'@Do you want to assign these permissions
now?@@19@@@2
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 91 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
10955
You don't have permission to open '|' for exclusive use.@Microsoft Office Access is opening the
database for shared access.To open a database for exclusive access, you must have Open
Exclusive permission for it. For more information on permissions and who can set them, click
Help.@@5@1@10222@1
10956
;LCID=0x0409
10957
You haven't entered a workgroup ID. To ensure that your workgroup information file is unique,
enter a unique workgroup ID of up to 20 numbers or letters. Continue without a workgroup
ID?@@@20@@@1
10958
The file '|' already exists. Replace existing file?@@@20@@@1
10959
Workgroup Files (*.mdw)
10960
Select Workgroup Information File
10961
Open
10962
You have successfully created the workgroup information file '|.'@@@1@@@4
10963
Application-defined or object-defined error
10964
You have successfully joined the workgroup defined by the workgroup information file
'|'@@@1@@@2
10965
Application-defined or object-defined error
10966
Application-defined or object-defined error
10967
Application-defined or object-defined error
10968
Microsoft Office Access cannot add a digital signature to your file because Access cannot gain
exclusive access to the file. @Make sure no other person or program has the file open and try
to add the digital signature again.@@1@@@2
10969
Application-defined or object-defined error
10970
Application-defined or object-defined error
10971
Application-defined or object-defined error
10972
Application-defined or object-defined error
10973
Application-defined or object-defined error
10974
Modifications to the database or project have invalidated the associated digital
signature.@This may require you to make a trust decision the next time you open the
database or project. @@2@1@553714150@1
29000
There isn't enough memory to create an input area.@Close unneeded programs. Then try to
create the input area again.For more information on freeing memory, search the Microsoft
Windows Help index for 'memory, troubleshooting'.@@1@@@1
29001
Microsoft Office Access failed to save module '|.'@Your computer may be low on disk
space.For information on freeing memory or disk space, search the Microsoft Windows Help
index for 'memory, troubleshooting' or 'disk space, freeing'.@@1@@@3
29002
Microsoft Office Access failed to create the Visual Basic module '|.'@If your database is on a
network drive, check your network connection, and then try again.@@1@@@1
29003
Microsoft Office Access failed to convert or enable your code modules.@Your computer may be
low on disk space or memory.@@1@@@1
29004
The new procedure name you provided is invalid.@@@2@1@11738@1
29005
The procedure '|' already exists.@Choose another procedure name.@@1@@@1
29006
Microsoft Office Access failed to create a Debug window toolbar.@The system may be out of
resource memory.@Close unneeded programs and try again. For more information on
freeing memory, search the Microsoft Windows Help index for 'memory,
troubleshooting'.@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 92 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
29007
During the paste or import operation, Microsoft Office Access failed to convert the '|' module
from an earlier version of a Microsoft Office Access database.@Your computer may be low on
disk space or memory.@@1@@@1
29008
Microsoft Office Access couldn't create storage space for a Visual Basic module.@If your
database is on a network drive, check your network connection, and then try
again.@@1@@@3
29009
Microsoft Office Access couldn't open the storage space for a Visual Basic module.@Your
computer may be low on disk space.For information on freeing memory or disk space,
search the Microsoft Windows Help index for 'memory, troubleshooting' or 'disk space,
freeing'.@@1@@@3
29010
The function name is too long.@Microsoft Office Access will truncate the function name to 255
characters.@@1@1@11738@1
29011
Microsoft Office Access failed to save the database.@Your computer may be low on disk
space.For information on freeing memory or disk space, search the Microsoft Windows Help
index for 'memory, troubleshooting' or 'disk space, freeing'.@@1@@@3
29012
Application-defined or object-defined error
29013
This action will reset the current code in break mode.@Do you want to stop the running
code?@* To halt the execution of the program so the Module window can be closed, select
Yes.* To leave the code in the current state, select No.@20@@@1
29014
You can't add a reference to a Microsoft Office Access workgroup.@@@2@1@13780@1
29015
You can't remove this reference.@Microsoft Office Access needs this reference in order to work
properly.@@1@@@1
29016
You can't add a reference to the open database.@@@1@@@1
29017
The database | was created in an earlier version of Microsoft Office Access.@Convert this
database to the current version of Microsoft Office Access by using the Convert Database
command on the Tools menu (Database Utilities submenu).@@1@@@1
29018
You can't use a standard module for this operation.@@@1@@@1
29019
The module name '|' is invalid.@* The module name may start with the prefix Form_ or
Report_.* The module can't be named Forms, Reports, Modules, Application, Screen,
Assistant, CommandBars, References, or DoCmd.* The module name may have too many
characters.@@2@1@11734@1
29020
Another user has modified this database.@To see the current version, close the database and
open it again.@@1@@@1
29021
This operation isn't available while there is a module in break mode.@Reset the executing
code and try the operation again.@@1@@@1
29022
There were compilation errors during the conversion or enabling of this database.@The
database has not been saved in a compiled state. The performance of this database will be
impaired because Microsoft Office Access will need to recompile the database for each
session.For information on improving performance, click Help.@@2@1@11705@1
29023
There are calls to 16-bit dynamic-link libraries (.dll) in modules in this database.@These won't
work under Microsoft Windows 95 or Microsoft Windows NT.@Change your code to call
equivalent 32-bit dynamic-link libraries (.dll).@2@1@11961@1
29024
The current user account doesn't have permission to convert or enable this database.@To
convert or enable a database, ensure the following:* You must join the workgroup that
defines the user accounts used to access the database.* Your user account must have
Open/Run and Open Exclusive permissions for the database object.* Your user account must
have Modify Design or Administer permissions for all tables in the database, or it must be the
owner of all tables in the database.* Your user account must have Read Design permission
for all objects in the database.* Request that other users close the
database.@@2@2@77316@
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 93 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
29025
There are calls to 16-bit dynamic-link libraries (.dll) in modules in this database.@These won't
work under Microsoft Windows 95 or Microsoft Windows NT.@Translate these calls to
equivalent 32-bit dynamic-link libraries.@2@1@11961@
29026
The database that you are trying to open or convert is currently in use, or you do not have
permission to open it exclusively.@When you convert a database, or the first time you open
an earlier version database, another user can't have the database open.@Try one of the
following:* Request that other users close the database.* Using the version of Microsoft
Office Access in which the database is written, have your workgroup administrator grant you
the permission to open the database exclusively.Multiple users can share the database after
you convert it, or after you open it for the first time.@1@1@9027@1
29027
Microsoft Office Access was unable to save the project.@Another user is saving the project
now.Do you want to retry?@@23@@@1
29028
The Save operation failed.@@@1@@@1
29029
You are trying to open a read-only database.@The first time you open an earlier version
database, you must be able to write changes to the database.* The database file's read-only
attribute may be set; clear this attribute.* You may have chosen the Open Read Only
command in the Open dialog box. Don't choose this command the first time you open the
database.* Your license to use this application may have expired.@@1@@@1
29030
Microsoft Office Access can't establish a reference to the specified database.@The referenced
database can't be found, or it's locked exclusively by another user so it can't be
opened.@Restore the referenced database from a backup copy or ask the user that has the
database locked to open the database in nonexclusive mode.@1@@@1
29031
Microsoft Office Access can't create or open the requested database now.@The database may
be locked exclusively by another user.@@1@@@1
29032
The '|' module is open; Microsoft Office Access can't set the permissions on an open
module.@@@1@@@1
29033
Microsoft Office Access can't add references to a replicated database; changes will be
ignored.@@@1@@@1
29034
Microsoft Office Access is unable to import the module from the source replica.@Synchronize
the source database.@@1@@@1
29040
Microsoft Office Access is currently unable to rename the form, report, or module to '|'.@Close
the database, reopen it, and then try the rename operation again.@@1@@@1
29041
One or more forms or reports contains an ActiveX control that could not be loaded.@These
controls will not function properly until you register them, open the forms or reports in Design
view, and save the forms or reports.@@1@@@1
29042
One or more forms or reports contains an ActiveX control that could not be loaded.@These
controls will not function properly until you register them, open the forms or reports in Design
view, and save the forms or reports.@@1@@@1
29043
Microsoft Office Access has converted the code in '|' to your current version of Visual
Basic.@To improve the performance of this database, do the following:1. Open any module
in this database in Design view.2. On the Debug menu, click Compile And Save All
Modules.@@1@@@1
29044
DAO version 3.0 is not compatible with this version of Microsoft Office Access.@Create a
reference to DAO version 3.5. For information on setting references, click
Help.@@2@1@13780@1
29045
You can't import, export, create, modify, or rename any forms, reports, pages or modules in
an ACCDE, MDE or ADE database.@@@1@@@1
29046
You can't create a module for a form or report if it is read-only, or if the database is readonly.@@@1@@@1
29047
Microsoft Office Access was unable to open the Visual Basic project for this
database.@Another user is saving the project now. Do you want to retry?@@23@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 94 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
29048
MDE databases can't reference MDB databases.@MDE databases can only reference other
MDE databases or type libraries.@@1@@@1
29049
To add a code module to a form or report, you must switch to Design view and set the
HasModule property of the form or report to Yes.@@@1@@@1
29050
Microsoft Office Access couldn't compile this database because one or more references
couldn't be resolved.@The database has not been saved in a compiled state. The performance
of this database will be slower because Microsoft Office Access will need to recompile the
database for each session.@For information on improving performance, click
Help.@2@1@11705@1
29051
The current user account doesn't have permission to make an MDE file from this
database.@To make an MDE file, do the following:* Join the workgroup that defines the user
accounts used to access the database.* Make sure the user account has Open/Run and
Open Exclusive permissions for the database object.* Make sure the user account has
Modify Design or Administer permissions for the MSysModules2 table in the database.*
Request that other users close the database.@@1@@@1
29052
The Visual Basic for Applications project in the database '|' can't be converted to the current
Visual Basic format.@If the database is an MDE, you will need to rebuild the MDE from the
source MDB. If you don't have the source MDB, you will need to obtain a new version of the
MDE that is compatible with the current version of Visual Basic.@@1@@@1
29053
Microsoft Office Access can't create any more controls on this form or report.@If you have
deleted controls from this form or report in the past, you may be able to rename the form or
report and then add more controls to it.@@1@@@1
29054
Microsoft Office Access can't add, rename, or delete the control(s) you
requested.@@@1@@@1
29055
The form or report '|' has too many controls.@Reduce the number of controls on the form or
report before using it in this version of Microsoft Office Access.@@1@@@1
29056
Someone else is using '|' and the Visual Basic for Applications project does not match your
version of Visual Basic.@You need to open the database exclusively in order to upgrade the
Visual Basic for Applications project in this database.@@1@@@1
29057
The database '|' is read-only and the Visual Basic for Applications project does not match your
version of Visual Basic.@You need to open the database read-write in order to upgrade the
Visual Basic for Applications project in this database.@@1@@@1
29058
You can't create a module for a form or report while an instance of the form or report is in
browse mode.@@@1@@@1
29059
Microsoft Office Access was unable do display the module.@@@1@@@1
29060
File not found.@@@1@@@1
29061
There were compilation errors during the conversion or enabling of this database.@This might
be due to old DAO syntax that is no longer supported.For an example on how to fixup the
code, click Help. @@2@1@11705@1
29062
The module name '|' is misspelled or refers to a module that doesn't exist.@If the invalid
module name is in a macro, an Action Failed dialog box will display the macro name and the
macro's arguments after you click OK. Open the Macro window, and enter the correct module
name.@@1@@@1
29063
The Visual Basic for Applications project in the database is corrupt.
29064
You do not have exclusive access to the database at this time. If you proceed to make
changes, you may not be able to save them later.
29065
Microsoft Office Access can't save design changes or save to a new database object because
another user has the file open. To save your design changes or to save to a new object, you
must have exclusive access to the file.
29066
You do not have exclusive access to the database. Your design changes cannot be saved at
this time. Do you want to close without saving your changes?
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 95 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
29067
You do not have exclusive access to the database. You cannot convert this database at this
time.
29068
Microsoft Office Access cannot complete this operation. You must stop the code and try again.
29069
Microsoft Office Access cannot save the digital signature at this time.@* You may be in a
database under Source Code Control.* You may be in a database which is read only.* The
database uses either the *.accdb or *.accde file name extension. To sign such a database,
click the Microsoft Office Button, point to the Publish menu, and then click Package and
Sign.@@1@@@1
29070
Your Microsoft Office Access database or project contains a missing or broken reference to the
file '|1'|2@* To ensure that your database or project works properly, you must fix this
reference. @@1@2@5043@1
29071
Missing or broken VBE reference to the file '|1'.
29072
Microsoft Office Access has detected corruption in this file. To try to repair the corruption, first
make a backup copy of the file. Click the Microsoft Office Button, point to Manage and then
click Compact and Repair Database. If you are currently trying to repair this corruption, you
need to recreate this file or restore it from a previous backup.@@@2@1@553714192@1
29073
You do not have exclusive access to the database. You cannot continue with the Source Code
Control command.
29074
Microsoft Office Access failed to create the Visual Basic module.@If your database is on a
network drive, check your network connection, and then try again.@@1@@@1
29075
Access cannot add a digital signature to a file created in Access 97 or earlier.@Convert the file
to Access 2000 or later file format, and then add a digital signature.@@1@@@1
29076
There was a problem with the digital certificate. The VBA project could not be signed. The
signature will be discarded.@@@1@@@1
29077
Application-defined or object-defined error
29078
Application-defined or object-defined error
29079
Microsoft Office Access is unable to read the VBA modules in this database and cannot recover
the modules because the file is read-only. To recover the VBA modules, close the database
and make a backup copy of the database. Then open the database with read/write
permission.@@@2@2@553713744@1
29080
The VBA modules in this database appear to have been saved with errors. Access can recover
the modules, but you should backup the database first. To cancel so you can make a backup
copy of the database, click Cancel. Then make a backup copy of the database. @If you have a
backup copy of the database, click OK. When the database opens, examine the modules to
see that they are correct. If they are not, you should revert to a recent
backup.@@6@2@553713744@1
29081
The database cannot be opened because the VBA project contained in it cannot be read. The
database can be opened only if the VBA project is first deleted. Deleting the VBA project
removes all code from modules, forms and reports. You should back up your database before
attempting to open the database and delete the VBA project.@To create a backup copy, click
Cancel and then make a backup copy of your database. To open the database and delete the
VBA project without creating a backup copy, click OK.@@6@2@553713744@1
29082
The version of Access used to save this database cannot be detected. This problem cannot be
corrected because the database is read-only. Click OK, and after the database closes, make a
backup copy of the database. Then open the database with read/write
permission.@@@2@2@553713744@1
30000
Microsoft Office Access could not find the SQL Server specified. Verify that the server name is
correct.
30001
Microsoft Office Access could not find the database on the server. Verify that the database
name is correct.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 96 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
30002
Microsoft Office Access could not log on to the server. Verify that the log on information is
correct.
30004
The Default Max Records setting must be between 0 and 2147483647.
30005
Missing SQL command
30006
Access was not able to perform this operation because the project is not connected to a SQL
Server database.
30007
Can't sort on one or more fields specified in 'Order By' property or sorting/grouping dialog.
30008
The server you are trying to access is case sensitive. Objects of the same name but of
different case are not supported. Using these objects may result in a loss of data.
30009
Another user or application has deleted this record or changed the value of its primary key.
30010
Cannot apply Filter on one or more fields specified in the Filter property.
30011
Cannot get column information for the database object being browsed.
30012
A Server Filter cannot be applied to a stored procedure Record Source. Filter not applied.
30013
You can't update the record because another user or application deleted it or changed the
value of its primary key.
30014
The data was added to the database but the data won't be displayed in the form because it
doesn't satisfy the criteria in the underlying record source.
30015
The specified record source contains duplicate names for some output fields. Use aliases in
your SELECT statement to give each field a unique name.
30016
The field '|' is read only.
30017
This database is not enabled for publication.
30018
Cannot create objects of type '|' against current SQL backend.
and server setup.
30019
Microsoft Office Access cannot copy a table with a name that is longer than 64 characters.
30020
Cannot find column '|'.
30021
Cannot use domain functions on stored procedures.
30022
The Access project could not be opened. You may not have adequate permissions, or the
project may be read-only.
30023
Cannot use domain functions on scalar functions.
30024
Your password will not be encrypted before it is saved to the file.@Users who view the source
contents of the file will be able to see the account user name and password. &Save
Password Cancel@@36@1@553714179@
30025
Invalid SQL Statement. Check the server filter on the form record source
30026
Access is unable to connect to '|1' database on the '|2' server. Make sure that the database
still exists and that the server is running.
30027
The value you entered is not consistent with the data type or length of the column.
30028
The database name for the attached database file is blank. Enter a name for your database.
30029
This version of Microsoft Office Access does not support design changes with the version of
Microsoft SQL Server to which your Access project is connected. See the Microsoft Office
Update Web site for the latest information and downloads. Your design changes will not be
saved.
31000
You must specify criteria for all conditional formats.@@@1@@@1
31001
A conditional format expression can't be longer than 946 characters.@@@1@@@1
31002
Microsoft Office Access can't modify the control's conditional formats right now.@Your program
tried to modify the conditional format of a control while the conditional format was being
evaluated.@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Please check your permissions
Page 97 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
31003
The setting for this property is too long.@You can enter up to either 255 or 2,048 characters
for this property, depending on the data type.@@1@@@1
31004
The value of an (AutoNumber) field cannot be retrived prior to being saved.Please save
the record that contains the (AutoNumber) field prior to performing this action.@@@1@@@1
31005
Access failed to evaluate one or more expressions because '|' was referenced in an
expression. Only functions and properties that are considered to be safe are allowed in
expressions when Access runs in sandbox mode.@For more information on sandbox mode,
search for "Sandbox mode" in Access Help.@@1@@@1
31006
This method is not supported for Attachment controls in the current database file
format.@@@1@@@1
31500
Microsoft Office Access can't send this format in a mail message.@To send this format in a
mail message, click Export on the File menu, or use the OutputTo method to create the files
and attach them to a mail message.@@1@@@1
31501
The selected transform file '|' cannot be found. Please select a different transform.
31502
Microsoft Office Access can't find the Microsoft Office international dynamic-link library
(DLL).@Reinstall Microsoft Office.@@1@@@3
31503
The specified transform did not successfully convert the data. Select a different transform.
31504
The data was transformed in a format that cannot be imported.
31505
Are you sure you want to remove '|' from the list of available transforms?This will not
actually delete the transform file.
31506
The selected transform file cannot be found. Select a different transform or remove the
transform. Then try to export again.
31507
Invalid field data type.
31508
Cannot load the Office Web Components@Access had a problem loading the Office Web
Components Version 9.0. Try going through set-up to re-install them@@1@@@3
31509
Cannot load the Office Web Components@Access had a problem loading the Office Web
Components Version 10.0. Try going through set-up to re-install them@@1@@@3
31510
Microsoft Office Access can't load the dynamic-link library |. @You need to resolve the failure
and start Access again.@@1@@@3
31511
You have chosen to alter the mode in which SQL syntax will be interpreted in this database.
This will mean: @* Existing queries may return different results or not run at all.* The range
of data-types and reserved words will change.* Different wildcards will be used. @It is
recommended that you make a backup copy of this database before continuing. If you agree
to continue, Access will close this database, compact it, and re-open in the new mode. Select
OK to continue.@5@1@24324@1
31512
Microsoft Office Access can't open the mail session.@You may not have configured an e-mail
client on this computer. Ensure that your e-mail software has been installed and configured
properly.@@1@@@1
31513
All open objects must be closed prior to converting to a different version.@Do you want
Microsoft Office Access to close the objects?@@19@@@2
31514
Microsoft Office Access can't convert this database to a different version because one or more
objects are open.@Close all objects and try again.@@1@@@3
31515
Your database is using SQL Server Compatible Syntax (ANSI 92) for which Access 2000 has
limited support. This will mean:@* Access 2000 users may not be able to see some
queries.* Existing queries may return different results or not run at all.* The range of datatypes and reserved words will change.* Different wildcards will be used. @It is
recommended that you change the SQL Server Compatible Syntax (ANSI 92) setting before
converting this database to the Access 2000 file format. Select Cancel to abort the conversion
process and change the SQL Server Compatible Syntax (ANSI 92) setting.@5@1@24324@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 98 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
31516
Microsoft Office Access can't convert this database to the requested version because it has
been 'enabled' to work with newer versions of Microsoft Office Access than it was originally
created with.@You can convert this database to a newer format, and then retry this operation
with the newly converted database.@@1@@@1
31517
Microsoft Office Access can't convert this database to the requested version because it is from
an older version of Microsoft Office Access.@You can convert this database to a newer format,
and then retry this operation with the newly converted database.@@1@@@1
31518
The following controls contain expressions that can't be represented in a Microsoft Office
Access project PivotTable or PivotChart view: |.@Do you still want to switch to PivotTable or
PivotChart view?@@19@@@2
31519
You cannot import this file.@You cannot import a text file unless it has one of these
extensions: |.@@1@@@1
31520
You cannot import this file.@You cannot import a text file that has one of these extensions:
|.@@1@@@1
31521
Cannot establish connection to the server.@|@@1@@@1
31522
Microsoft SQL Server Desktop Engine must be on the machine running Microsoft Office
Access.@@@1@@@1
31523
Microsoft Office Access was unable to open the file '|'. The file may not be an Access file, the
path or filename specified may be incorrect, or the file can not be opened exclusively. To
repair the file manually, on the File menu, point to Manage Database, and then click Compact
and Repair Database.@@@1@@@1
31524
Microsoft Office Access can't transfer the user-defined function '|'. User-defined functions can
only be transferred between Microsoft SQL Servers that are version 8.0 or
higher.@@@1@@@1
31525
You can copy and paste this object only if at least Microsoft SQL Server 2000 is installed on
both the source and destination servers.@@@1@@@1
31526
You cannot create a Microsoft Office Access ADE or MDE file from a database saved in
Microsoft Office Access 2000 format.@Convert the database to the current version of Microsoft
Office Access. Then create the ADE or MDE file.@@1@@@1
31527
Path not found: |.@@@1@@@1
31528
Table '|' is in use. Please close the table and retry import.@@@1@@@1
31529
View '|' is in use. Please close the view and retry import.@@@1@@@1
31530
Procedure '|' is in use. Please close the procedure and retry import.@@@1@@@1
31531
Microsoft Office Access cannot create table(s) using the information contained in the
document(s) you are trying to import.@@@1@@@1
31532
Microsoft Office Access was unable to export the data.@@@1@@@1
31533
Invalid filename.@@@1@@@1
31534
Your database is using SQL Server Compatible Syntax (ANSI 92) for which Access 97 has
limited support. This will mean:@* Existing queries may return different results or not run at
all.* The range of data-types and reserved words will change.* Different wildcards will be
used. @It is recommended that you change the SQL Server Compatible Syntax (ANSI 92)
setting before converting this database to the Access 97 file format. Select Cancel to abort
the conversion process and change the SQL Server Compatible Syntax (ANSI 92)
setting.@5@1@24324@1
31535
Invalid parameters for ExportXML.@Press Help for more information.@@2@2@5170@1
31536
The XML schema properties do not match the existing table structures.@Overwrite existing
structures?@@19@@@1
31537
There is already an object named '|' in the database.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 99 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
31538
Microsoft Office Access cannot create this file. To create the file, you must give the file a
unique name, provide a valid connection string and user ID, and you must have the necessary
connection and file creation permissions.@@@1@@@1
31539
There was an error loading the XSL transformation file '|1'. Please make sure that the file is a
properly formatted XSL file and is the correct file to use for the data supplied. |2
31540
There was an error loading the XML data file '|1'. Please make sure that the file is a properly
formatted XML file. |2
31541
Microsoft Office Access cannot open this file.@This file is located outside your intranet or on an
untrusted site. Microsoft Office Access will not open the file due to potential security
problems. @To open the file, copy it to your machine or an accessible network
location.@2@@@1
31542
The startup action associated with this file may not be safe. Do you want to execute the
startup action as you open the file?@@@22@@@1
31543
The startup action associated with this file may not be safe. If you choose not to execute the
startup action, Microsoft Office Access will not open the file. Do you want to execute the
startup action and open the file?@@@22@@@1
31544
Microsoft Office Access cannot open this file.@The author of this file has set it to open only
when a startup action is executed, and Microsoft Office Access is currently set to disable
startup actions.@To address this problem, contact the author of the file or your system
administrator.@2@@@1
31545
Microsoft Office Access cannot open this file.@The Internet Security Zone Manager is missing
or not correctly installed and therefore the safety of this file cannot be verified.@To address
this problem, reinstall Windows Internet Explorer or the appropriate Office System
Pack.@2@@@1
31546
This database is a Microsoft Office Access 7.0/8.0/9.0 Design Master.@If you click OK, the
database you selected will be renamed to |1 and then converted to |2. Everyone using a
replica of this database will have to upgrade to Microsoft Office Access 2002 after the next
synchronization.@@4@@@2
31547
Microsoft Office Access cannot export this object to XML when it is open in Print Preview. Close
the object and try again.@@@1@@@1
31548
Microsoft Office Access cannot export a table to XML when it is open in Design. Close the
object and try again.@@@1@@@1
31549
Finished importing document '|'.
31550
Not all of your data was successfully imported. Error descriptions with associated row
numbers of bad records can be found in the Microsoft Office Access table '|'.
31551
Only XML files can be exported to an Internet address (http://, ftp://). Enter a path that
points to a location on your computer or on the network.@@@1@@@1
31552
The document(s) you are importing contain XML Schema (XSD) information created outside
Microsoft Office Access. XML Schema information created outside Microsoft Office Access is not
supported. If you continue, Microsoft Office Access will only import the data, and ignore the
XML Schema.@Would you like to continue?@@19@@@1
31553
The Smart Tag property value cannot exceed 1024 characters.@@@1@@@1
31554
You are attempting to apply more smart tags then the system can handle.@Please uncheck
some of the selected tags.@@1@@@1
31555
The specified transform did not successfully convert the data.Would you like to save a
copy of the Data to Export at '|' for troubleshooting?
31556
To view object dependencies or change the Track name AutoCorrect info option, Microsoft
Office Access must close all objects and update dependency information.@This could take
several minutes. Do you want to continue?@@21@1@553713744@1
31557
Microsoft Office Access cannot update dependency information because one or more objects
are open.@Close all objects and try again.@@1@@@3
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 100 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
31558
The Track name AutoCorrect info option generates name maps for the objects in the database.
This may take several minutes.@Do you want to leave this option turned on?@@3@@@1
31559
Microsoft Office Access could not connect to the site you specified. Verify the address of the
site or contact your site administrator.
31560
The site you specified does not support linking to a Microsoft Office Access database. The site
must be running Windows SharePoint Services from Microsoft.
31561
The site you specified does not support importing data to a Microsoft Office Access database.
The site must be running Microsoft Windows SharePoint Services.
31562
The site you specified does not contain any lists. Verify the address of the site, or contact
your site administrator.
31563
Microsoft Office Access could not enable name AutoCorrect for one or more objects because
Access could not open and save the objects. An open or save operation could have failed due
to one or more of the following reasons - the object is already open, you don't have
permissions to open the object in Design view, the database is read-only, or the source of a
linked table could not be found.@@@2@1@553713743@1
31564
To generate object dependencies, the Track name AutoCorrect info option must be turned
on.@Enable name AutoCorrect and continue?@@5@1@553713744@1
31565
Dependency information needs to be updated before you can view object dependencies. This
could take several minutes.@Do you want to continue?@@5@1@553713744@1
31566
The object dependencies feature is not enabled for this database because dependency info
needs to be updated.@@@5@1@553713744@1
31567
The object that you have selected in the Object Dependencies pane no longer exists in the
database.@@@1@@@1
31568
You do not have the necessary permissions to generate dependency information for the
selected object.@@@2@1@553713744@1
31569
To view dependency information, you must select a table, query, form, or
report.@@@1@1@553713742@1
31570
Dependency information cannot be generated because name maps are either missing or
outdated. Turn on the Track name AutoCorrect info option, make sure you have sufficient
permissions to open an object in Design view, and make sure the database is not readonly.@@@2@1@553713744@1
31571
Dependency information cannot be generated because name maps are outdated, and the
database is read-only.@@@2@1@553713744@1
31572
Microsoft Office Access cannot generate dependency information for a new unsaved object.
Save the new object and then check for object dependencies.@@@2@1@553713744@1
31573
Microsoft Office Access cannot generate dependency information for objects in a
project.@@@1@@@1
31574
Microsoft Office Access cannot export unbound forms or reports as XML documents.
31575
All open objects must be closed prior to backing up your database or project.@Do you want
Microsoft Office Access to close the objects?@@19@@@2
31576
Microsoft Office Access cannot backup this database or project because one or more objects
are open.@Close all objects and try again.@@1@@@3
31577
Microsoft Office Access could not connect to the site you specified. Verify the address of the
site or contact your site administrator.
31578
Microsoft Office Access was unable to transfer data to the Microsoft Windows SharePoint
Services site. The '|1' step failed.
|2
31579
The table could not be exported because you do not have sufficient permissions. Please
contact your site administrator.
31580
A list with the specified name already exists. Type a different name and try again.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 101 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
31581
The list name cannot contain any of the following characters: \/:*?"<>|. Type a different
name and try again.
31582
Microsoft Office Access cannot generate dependency information for objects in a replica
database.@@@1@@@1
31583
Finished importing from '|'.
31584
Finished linking to '|'.
31585
Finished exporting '|1' to '|2'.
31586
The site you specified does not support importing data from a Microsoft Office Access
database. The site must be running Windows SharePoint Services from Microsoft.
31587
Microsoft Office Access cannot generate dependency information because the Track Name
AutoCorrect Info option is turned off. This option cannot be turned on because the database is
either read-only or you do not have sufficient permissions.@@@1@@@1
31588
Error exporting picture file '|1' to specified path '|2'.
31589
Specified transform failed to successfully transform your data.
31590
A list named '|' already exists. You must either use a different name or go to the site and
delete the list.
31591
Microsoft Office Access is unable to export '|' to Windows SharePoint Services due to
limitations on the number of times each data type can appear in a Windows SharePoint
Services list.@See help to find out exactly what the restrictions are and for details on how to
create a query that will define the Windows SharePoint Services list that you would like to
create.@@2@1@553714173@1
31592
Cannot find the specified schema file '|'. Remove or update the file reference, and try again to
import.@@@1@@@1
31593
Microsoft Office Access has encountered an error processing the XML schema in file '|1'.
|2@@@1@@@1
31594
Microsoft Office Access was unable to export XML data to '|'.@@@1@@@1
31595
This database was saved in the Microsoft Access | file format.@For information on how to
import data from this database into a new file, click Microsoft Office Online on the Getting
Started with Microsoft Office Access page.@@1@@@1
31596
Cannot load the specification '|'. Try re-creating the specification.@@@1@@@1
31597
The specification XML failed to validate against the schema. There is an error in the following
line of the XML document: |.@@@1@@@1
31598
The specification XML failed to validate against the schema. There is an error in the following
specification XML string: |1 Possible value could be one of following '|2'.@@@1@@@1
31599
The specified name '|' cannot be set due to one of the following reasons:
• The specified name is not unique.
• The specified name is blank.
• The specified name does not follow Microsoft Office Access object-naming
rules.@@@1@@@1
31600
The specified description '|' is too long. The description cannot exceed 255
characters.@@@1@@@1
31601
The specification does not contain a description. '|'.@@@1@@@1
31602
The specification with the specified index does not exist. Specify a different index.
'|'.@@@1@@@1
31603
The name '|' is already in use. Enter a different name or click on the Manage Data Tasks
button to rename the existing specification. @@@1@@@1
31604
The required element <Columns> is missing under <ImportText> and <ExportText> for a
fixed width format.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
|
Page 102 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
31605
The Width attribute is required for all <column> elements under <ImportText> or
<ExportText> for a fixed width format.@@@1@@@1
31606
Cannot open the destination database. If the database is open, close it, and then try
again.@@@1@@@1
31607
The Path attribute is required for all formats except ImportWSS, ImportOutlook and
ExportXML.
31608
Specify a name for the import specification in the Save As box.
31609
Specify a name for the export specification in the Save As box.
31610
Do you want to delete '|'?
31611
Specify the name of the source or destination file in the File name box.
31612
The specification failed to execute. Try re-creating the specification.
31613
You have selected "Tables and Related Views" as the way to group objects in the database.
Access needs to update information on object dependencies to create the groups. This will
take some time for large databases.@Do you want to continue?@@3@@@1
31614
Are you sure you want to delete the item '|' from the Categories list?@Note that the individual
groups and the shortcuts to the objects in the database will be deleted, but the objects
themselves will not be deleted.@@3@@@1
31615
Are you sure you want to delete the group?@Note that only the shortcuts, and not the actual
objects will be deleted.@@3@@@1
31616
Duplicate Item Name@An item with the name | already exists in the Categories list. Specify a
different name for the item.@@1@@@1
31617
Duplicate Group Name@A group named | already exists. Specify a different name for the
group.@@1@@@1
31618
Blank Item Name@You have not specified a name for the item that you added to the
Categories list.@@1@@@1
31619
Blank Group Name@You have not specified a name for the group.@@1@@@1
31620
This will clear all the contents in your MSysNavPaneXXX system tables.@Do you want to
continue?@@3@@@1
31621
There is already a shortcut named '|1' to the '|2' object in this group.@@@1@@@1
31622
The table description cannot be changed for a linked table
31623
Microsoft Office Access has imported 'Favorites' and other groups into the converted database.
If you change the imported groups in Access 2007, you will not see those changes if you open
the database in an older version of Access. Also, if you change the imported groups by using
an older version of Access, you will not see those changes if you open the database in Access
2007. @@@1@@@1
31624
Enter a valid date.@@@1@@@1
31625
Enter a valid value.@@@1@@@1
31626
| issues were found that could result in unwanted behavior or missing data.@Do you want to
cancel the wizard and review the issues?@Click No to ignore the issues and continue with the
migration.
31627
A copy of the database has moved to |. Continue opening current file?
31628
Moving to SharePoint is not supported for databases that have the AllowBypassKey property
disabled.
31629
Template '|1' could not be instantiated.@|2@@@@@3
31630
Failed to set the database property '|'.
31631
The object name '|' could not be used because it doesn't follow object-naming rules.
31632
Failed to load '|1' into '|2'.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 103 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
31633
'|' is not a supported AccessObject type.
31634
Failed to create relationship '|'.
31635
Manifest.xml does not match the defined schema. |
31636
Tables.xml does not exist.
31637
This template cannot be used because it requires a later version of Microsoft Office Access.
See Microsoft Office Online for the latest templates you can use with your current version of
Microsoft Office Access.
31638
Errors were encountered while loading Tables.xml.
31639
Manifest.xml does not exist.
31640
Relationships.xml does not match the required schema.
31641
An unexpected error occurred when opening the template.
31642
NavPane.xml does not match the required schema.
31643
'|' is not a valid template.
31644
Failed to create a database with the specified CollatingOrder.
31645
Failed to set |1 on |2 '|3'.
31646
Failed to load NavPane.xml.
31647
An error occurred while flipping |1 '|2' right-to-left.
31648
An error occurred while performing Name AutoCorrect.
31649
An error occurred while fixing up the labels on |1 '|2'.
31650
The source file '|1' for |2 '|3' does not exist.
31651
The object name '|' could not be used because another object with the same name already
exists.
31652
You do not have exclusive access to the database. Your SharePoint Lists can not be taken
offline or cached at this time. Try again later.
31653
Microsoft Office Access is unable to take your lists offline. A circular relationship was detected.
31654
Access denied. You do not have permissions to SharePoint server. Verify permissions, and
retry this operation.
31655
Microsoft Office Outlook could not be started. Make sure Outlook is installed and properly set
up on your computer.
31656
You must have Microsoft Office Outlook 2007 on this computer to enable this feature.
31657
You cannot set up a collecting data using e-mail task, because your database has reached its
maximum size limit. Free some disk space and try again.
31658
The selected table or query does not have any fields that support collecting data using e-mail.
31659
| is read-only. You cannot use e-mail messages to collect or update data on this object.
31660
You cannot collect data for action queries, SQL-specific queries, and parameter queries by
using e-mail messages.
31661
The e-mail address field you have specified does not contain any valid addresses. Specify
another field.
31662
The value you have entered is not valid for the maximum number of replies.
31663
The value you have entered is not valid for the date and time to stop.
31664
The date and time to stop processing replies has to be greater than the current date and time.
31665
|
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 104 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
31666
The UpdateDependencyInfo method could not update one or more objects. Microsoft Office
Access has created a Name AutoCorrect Save Failures table in the current database with more
information about the failing objects.@@@2@1@553713744@1
31667
Do you want to delete all of the selected objects? Deleting these objects will remove them
from all groups.@You cannot undelete forms, reports, and modules.@@20@@@1
31668
Microsoft Office Access does not support opening HTML pages. @To open a Data Access Page,
use Windows Internet Explorer or Microsoft Office Access 2003 or
earlier.@@2@@4294967294@1
31669
Design changes are not supported for Data Access Pages. @To change the design of a Data
Access Page, use Microsoft Office Access 2003 or earlier.@@2@@4294967294@1
31670
Microsoft Office Access does not support this operation for Data Access Pages. To perform this
operation, use Microsoft Office Access 2003 or earlier.@@@1@@@1
31671
|
31672
This operation is not supported for SharePoint linked tables. To manage SharePoint linked
tables, point to Get External Data on the Data menu, and then click SharePoint List.
31673
Changes have been made to this database by an older version of Access or by an external
source. In order to use the Tables and Related Views group in the Navigation Pane the
dependency tree must be rebuilt. This may take a few moments.@Do you want to
continue?@@3@@@1
31674
Do you want to delete all of the selected objects? Deleting these objects will remove them
from all groups.@@@20@@@1
31675
You cannot create an .accde or .mde file from a disabled (non-trusted) database. If you trust
the source of this database, you can enable it by using the Message bar.@@@1@@@1
32000
The '|1' macro action cannot run with the specified '|2' argument either when in disabled
mode or when called from an embedded macro.@@@1@@@1
32001
The '|' RunCommand cannot be run in disabled mode.@@@1@@@1
32002
Cannot open or run macro '|', because it is not valid.@@@1@@@1
32003
The ApplyFilter action requires a valid control name that corresponds to a subform or
subreport.@@@1@@@1
32004
The control name '|' is misspelled or refers to a control that doesn't exist.@If the invalid
control name is in a macro, an Action Failed dialog box will display the macro name and the
macro's arguments after you click OK. Open the Macro window, and enter the correct control
name.@@1@@@1
32005
One or more actions are unknown and cannot be pasted.@@@1@@@1
32500
The group '|' you entered is invalid.@@@1@@@1
32501
The category '|' you entered is invalid.@@@1@@@1
32502
The value you entered isn't valid for the field '|'.@For example, you may have entered text in
a numeric field or a number that is greater than the FieldSize setting permits.@@1@@@1
32503
Support for export to .PDF or .XPS is not installed on this computer.@@@1@@@1
32504
The text you entered isn't an item in the list.@Do you want to edit the items in the
list?@@20@@@4
32505
Microsoft Office Access has recovered this database. Examine the database to verify that there
are no missing database objects.@@@1@@@1
32506
Microsoft Office Access has recovered this database, but one or more tables were found to
contain data corruption and were deleted. Deleted tables were logged in the
MSysRecoveryErrors table. This table is currently displayed in the datasheet.@@@1@@@1
32507
Microsoft Office Access has recovered this database, but one or more tables were found to
contain data corruption and were deleted. Deleted tables were logged in the
MSysRecoveryErrors table. @@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 105 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
32508
The 'Save as Outlook Contact' command failed.@@@1@@@1
32509
The 'Add from Outlook' command failed.@@@1@@@1
32510
Microsoft Office Access could not find any fields that match the fields in a Microsoft Office
Outlook Contact.@@@1@@@1
32511
Successfully added | contact(s).@@@1@@@1
32512
You cannot save this database in an earlier version format, because it uses features that
require the current file format.@Features that require the current file format include
attachments, multivalued fields, offline data, or links to external files that are not supported
by earlier versions of Access.@@1@@@1
32513
All open objects must be closed before you save the database.@Do you want Microsoft Office
Access to close all open objects?@@19@@@2
32514
Microsoft Office Access can't save this database to a different version, because one or more
objects are open.@Close all objects, and then try again.@@1@@@3
32515
You are about to delete the list and all its data from the SharePoint site. Do you want to
continue?
32516
The filter string you entered is not valid or you cannot apply a filter at this time.
32517
This SharePoint list or one of related lists doesn't exist on the SharePoint site.
32518
The following errors have occurred:
32519
The value specified for the Type parameter is invalid. Specify one of the following: Report,
Form, Query, or Table.
32520
The repair operation was cancelled. To repair the file manually, on the File menu, point to
Manage Database, and then click Compact and Repair Database.
32521
You can't change the value of this property in the OnPaint event.@@@1@@@1
32522
No contacts were imported. None of the fields have the necessary '|' property
specified.@@@1@@@1
32523
A custom macro in this report has failed to run, and is preventing the report from
rendering.@@@1@@@1
32524
Access could not create '|1'.@|2@Make sure that the file name (and location, if provided) are
in the correct format, such as c:\location\file name.@1@@@1
32525
Access could not download the template from Microsoft Office Online.
32526
You attempted to create an .mdb file on a SharePoint site. You can create only Access 2007
database (.accdb) files on SharePoint sites. Either change the file type or select a different
location.
32527
You attempted to create an .adp file on a SharePoint site. You can create only Access 2007
database (.accdb) files on SharePoint sites. Either change the file type or select a different
location.
32528
The application is disabled, and databases may not be created.
32529
This operation is not supported for parameterized queries or objects based on parameterized
queries.@@@1@@@1
32530
Sharing to Windows SharePoint Services requires the database to be in an Access 2007 or
greater format.
32531
Microsoft Office Access failed to create the SharePoint list. This could be because you don't
have the necessary permissions.
32532
The project cannot be converted to this format. The project can only be converted to Access
2000 or newer format.
32533
Failed to create field '|1' on table '|2'
32534
Failed to delete predefined field '|1' on table '|2'
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 106 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
32535
Failed to rename the the field '|1' on the SharePoint list '|2'
32536
The specified command (OutputTo) is not available now. Close objects open in Design View or
Layout View and try again.@@@1@@@1
32537
Only 256 TempVars can be created. Be sure to remove any TempVars that are not needed.
32538
TempVars can only store data. They cannot store objects.
32539
TempVars can only store strings with up to 65,356 characters.
32540
The name of this TempVar is too long. TempVar names must be 256 characters or less. Use
a shorter name.
32541
You must specify a name to set or remove a temporary variable.
32542
You must specify a value to set the temporary variable to.
32543
Do you want to connect to an existing SQL Server database?@Select No to create a new SQL
Server database.@@16@@@4
32544
You are trying to convert an encoded database. Decode the database, and then try
again.To protect the converted database, use the Encrypt with Password command.
32545
You are trying to convert a password protected database. Remove the password, and then try
again.To protect the converted database, use the Encrypt with Password command.
32546
You are trying to convert an encoded database that uses a password. Decode the database,
remove the password, and then try again.To protect the converted database, use the
Encrypt with Password command.
32547
You are trying to convert a database that is encrypted with a password. Remove the
password, and then try again.To protect the converted database, use the Set Database
Password command.
32548
There was an error displaying the mail message. Make sure that there are no open dialogs in
Outlook and try again.
32549
'|' contains over 10,000 rows. Processing may take several moments. Would you like to
continue?
32550
'|' is an empty lookup field. You will not be able to collect data for this field. To continue,
remove the empty lookup field from the list of fields to be included in this e-mail message.
32551
There was an error displaying the task. Make sure that there are no open dialogs in Outlook
and try again.
32552
This command is not available when the database is opened from the Web server. Would you
like to save a local copy of the database?
32553
To sign and deploy a database, you must use a database created with Microsoft Office Access
2007 or later. Convert the database to the Access 2007 format and start the signing process
again.
32554
Microsoft Office Access could not create a deployment package with the current database.
Check the path to the file.@@@1@@@1
32555
Microsoft Office Access could not sign the current database. Ensure that the digital certificate
used to sign the database is valid.@@@1@@@1
32556
Microsoft Office Access could not extract the database. Check the file name and the path to
the file.@@@1@@@1
32557
Microsoft Office Access could not download the packaged database. Network issues or issues
with the Web site may have prevented the download. Start the download again or browse to
the site and ensure that it is operating.@@@1@@@1
32558
You requested an invalid file. The file may be corrupt. Contact the person who created the file
and request a new copy.@@@1@@@1
32559
The template is in an unknown format and cannot be opened.
32560
The specified template does not exist.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 107 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
32561
The specified template contains errors or is not a valid template.
32562
The specified template cannot be created in the specified file format. Specify a different file
format for the new database.
32563
You cannot use a template file to create a database directly on a SharePoint site.
32564
This does not appear to be a template file. The file may have become corrupt, or the package
format may contain an error.
32565
The |0 '|1' could not be read from the template file. The object may be in an unrecognized
format or contain invalid data.
32566
The table '|0' in the template could not be associated with a SharePoint list with ID |1.
32567
The |0 '|1' in the template could not be loaded from text because of a parsing error. |2
32568
The table |0 or one of its fields could not be successfully renamed.
32569
Failed to add the VBA reference |0
32570
A Design Master or Replica cannot be converted to the Access 2007 file format.@@@1@@@1
32571
The contents of the Navigation Pane may not be changed while it is locked.
32572
Access Projects do not support custom groups in the Navigation Pane. You may not import or
export custom groups from an Access Project.
32573
Microsoft Office Access cannot perform the export operation.
32574
This template requires a SharePoint site with a newer version of Windows SharePoint
services. Specify a different site.
32575
The acCmdExport command for RunCommand has been deprecated. Use the OutputTo action
or one of the more specific RunCommands, such as acCmdExportExcel, acCmdExportRTF, and
acCmdExportText.
32576
The acCmdImport command for RunCommand has been deprecated. Use one of the more
specific RunCommands, such as acCmdImportAttachAccess, acCmdImportAttachExcel, and
acCmdImportAttachText.
32577
The acCmdLinkTables command for RunCommand has been deprecated. Use one of the more
specific RunCommands, such as acCmdImportAttachAccess, acCmdImportAttachExcel, and
acCmdImportAttachText.
32578
Microsoft Office Access could not load the Access database engine. Run setup again and
restart the application.@@@1@@@1
32579
You do not have permissions to write to this SharePoint site. Contact your site administrator
for assistance.
32580
Cannot publish the file | as the file is either checked out or locked for editing by another user.
32581
SQL Distributed Management Objects (SQL-DMO) must be on the machine running Microsoft
Office Access.
32582
The specified file name could not be used to create a database. Specify a different database
name.
32583
An error occurred while trying to create the database.
32584
No object with the given name and type exists in the current database.
32585
This feature is only available in an ADP.@@@1@@@1
32586
This database object cannot be saved as a report.@@@1@@@1
32587
The Source value you have specified is not valid.@@@1@@@1
32588
The table which you are trying to append to is currently open and must be closed before
proceeding. Do you want to save the changes and close the table?@@@20@@@2
32589
Microsoft Office Access encountered an error trying to close the table.@@@1@@@1
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 108 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
32590
You cannot link to a database that is stored on an Internet location. You should first save the
database to a location that uses a Universal Naming Convention (UNC), such as a server
share, and then link to it.@@@1@@@1
32591
The file path you specified is not valid. Please specify a full file path.@@@1@@@1
32592
The file name extension of '|' is not valid for the format to which you are trying to export. This
action is potentially unsafe. Do you want to continue? @@@20@@@2
32593
Overwite existing table or query '|'?@@@20@@@2
32594
The Show Column History command is not available while you are working with a SharePoint
list offline. Reconnect to the list and try again.@@@1@@@1
32595
Microsoft Office Access cannot delete the SharePoint list, because you don't have the
necessary permissions to delete the list or the list has been renamed or no longer exists.
32596
The Microsoft Office Access Outlook Add-in is disabled in Microsoft Office Outlook 2007. To
collect data by using e-mail messages in Microsoft Office Access 2007, verify that this add-in is
installed and enabled from within Office Outlook 2007.
32597
This database contains links to lists on the selected SharePoint site.Do you want to be able
to add shortcuts to each list's View menu? This will enable other people to open forms and
reports from the SharePoint Web page.
32598
The name '|' is already in use. Enter a different name. @@@1@@@1
32599
Only XML files can be imported from an Internet address (http://, ftp://). Enter a path that
points to a location on your computer or on the network.@@@1@@@1
32600
The list |1 is already used by the |2 link table. Select a different list.
32601
You are about to change sites. Any changes you have made to link tables will be discarded. Do
you want to continue without saving these changes?
32602
The SetProperty action or method failed because there was no form or report context.@To
establish the correct context for SetProperty, call OpenForm or OpenReport before calling
SetProperty, or call SetProperty from an event on a form or report.@@1@@@1
32603
SharePoint List data will be cached in this database. If this database is shared, users who do
not have permissions to view this data will be able to see it.
32604
There was an error publishing your database. Verify your publish URL and permissions, and
then try again.
32605
Your data source contains more than 255 fields (columns). Access will import only the first 255
fields.
32606
Attachment fields are not supported in the MDB or ADP database formats. Attachment fields
are included in the source database table and those fields will not be exported. Do you want to
continue?
32607
Attachment fields are not supported in the MDB or ADP database formats. If attachment fields
are included in the source database tables, those fields will not be imported. Do you want to
continue?
32608
This database file cannot be converted because it contains linked tables that refer to one or
more files that cannot be found. To continue, delete these linked tables or repair the
links.@@@1@@@1
32609
|1 cannot load customization '|2'. This customization name was already loaded.
32610
Automatic configuration of the current version of Microsoft Office Access has failed. Your
database might not function correctly. This can occur if you do not have the necessary
permissions to install Microsoft Office Access on this computer.@@@1@@@1
32611
The file '|' already exists.@Do you want to update the existing file?@@20@@@2
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 109 of 110
Error Numbers and Descriptions for Microsoft Access 2007
Number Description
32612
Microsoft Office Access cannot open this file.
This file was converted to runtime mode by changing its file name extension to .accdr. This file
will open only when Access is in runtime mode.
To open the file, either double-click it in Windows Explorer, open it by using a shortcut, or use
the /runtime command-line switch.
To modify the design of this database, rename it with an .accdb file name extension, and then
open it in Access.
32613
This feature requires the Microsoft Office Access 2007 program to be installed on your
computer.
The application you are running is powered by the Microsoft Office Access 2007 Runtime. For
information about the differences between the Microsoft Office Access program and the
Microsoft Office Access Runtime, in the status bar, click Powered by Microsoft Office Access.
Copyright (c) 2008 FMS, Inc.
fmsinc.com
Page 110 of 110
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising