Siemens | A70 | Product data | Siemens A70 Product data

Siemens A70 Product data
s
Siemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Overview.fm
Overview of the phone
1 Display indicators
Signal strength and battery level.
2 Soft keys
Press the soft key to call up the function
that is displayed as §Text§ or icon on the
grey fields above the key.
3 A Call key
Dial displayed phone number or name,
accept calls. In standby mode: Display the
last calls.
4 B On/Off/End key
• Switched off: press and hold to
switch on.
• During a conversation or in an
application: press briefly to finish.
• In menus: press briefly to go back a
level. Press and hold to return to
standby mode.
• In standby mode: press and hold to
switch off phone.
5 Control key
• In standby mode:
FOpen Phonebook.
• During conversation:
EStart adjusting the volume then set
volume withG.
6 * Press and hold
• In standby mode: switch on/off all signal tones (except alarm).
• For incoming calls: only switch off ring
tones.
7 ' Press and hold
In standby mode: switch key lock on/off.
_
g
Service provider
17.06.2005
09:15
New SMS
Menu
A70
VAR Language: en2; VAR issue date: 050331
right page (1) of A70 Dorado, 140mm,
en2, A31008-H2770-M7-3-RC19
(28.06.2005, 10:53)
A70 ct-e2,
A31008-H2770-M7-3-RC19
left page (2) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
2
Getting started
Getting started
Using the SIM card/battery
Your phone's display is delivered with a
protective film. Remove this film before getting started. The service provider supplies
you with a SIM card on which all the important data for your account is stored. If
the SIM card is credit card-sized, snap out
the smaller segment and trim any rough
edges.
Remove the battery cover upwards 1.
1
6
5
7
To remove, press the retaining tab 7
then lift the battery out.
Insert the battery cover by the tabs at the
bottom 8, then press downwards 9,
until it engages.
9
Insert SIM card 2 and push it fully into
the locating slot (make sure the angled
corner is in the correct position 3). Then
push the retaining catch over the top of
the SIM card 4.
4
8
Always switch off phone before removing
the battery!
Only 3V SIM cards are supported. Please
contact your service provider if you have
an older card.
2
3
Insert the battery sideways into the
phone 5, then press downwards 6
until it engages.
Charge battery
The battery is not fully charged when delivered. Plug in the charger cable at the
bottom of the phone, plug in the power
supply unit to the mains power socket
and charge for at least two hours.
iemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
VAR Language: en2; VAR issue date: 050331
A70 ct-e2, A31008-H2770-M7-3-RC19
right page (3) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
Switch on/off, PIN entry
Charging time
The charging time is 2 hours. Ambient
temperature of 5 °C to 40 °C (icon flashes
as a warning when 5 °C above/below this).
Switch on/off, PIN entry
Switch on/off
Press and hold On/Off/End keyBto
switch on or off.
Enter PIN
Siemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
The SIM card can be protected with a
4 - 8 digit PIN. Enter the PIN code using
the number keys (the display shows a series of asterisks, if you make a mistake
press §Clear§). Confirm your input with §OK§.
Logging on to the network will take a few
seconds.
First time switching on phone, the time
and date must be set.
Standby mode
When the name of the service provider/
logo appears on the display, the phone is
in standby mode and ready for use.
Press and hold the On/Off/End keyBto
return to standby mode from any menu
option.
Security
The phone and SIM card are protected
against misuse by several security codes.
Keep these confidential numbers in a safe
place where you can access them again if
required.
§Menu§ ¢ Setup ¢ Security ¢ Codes
¢ Select a function.
PIN control
The PIN is usually requested each time
the phone is switched on. You can deactivate this feature but you risk unauthorised use of the phone. Some service providers do not permit deactivation of the
control.
3
Change PIN
You can change the PIN to any 4 - 8 digit
number you may find easier to remember.
Change PIN2
(Displayed only if PIN 2 is available.)
Proceed as with Change PIN.
Change phonecode
You define and enter the phone code
(4 - 8 digits) when calling a phone code
protected function (e.g. Direct call, p. 4)
for the first time. It is then valid for all
protected functions. If it is entered incorrectly three times the phone is locked.
Contact the Siemens Service.
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter the
PUK (MASTER PIN) provided by your service provider with the SIM card. If the PUK
(MASTER PIN) has been lost, please contact your service provider.
Prevent accidental activation
Even if PIN use is deactivated (p. 3) confirmation is required to switch on the
phone.
This prevents accidental activation of the
phone, e.g. when you are carrying it in a
bag or when you are travelling in an
aircraft.
After pressing and holding the On/Off/End
keyBselect §OK§ to switch on the phone
or abort the operation with §Cancel§.
Making a phone call
Dialling with number keys
The phone must be switched on (standby
mode). Enter the number (always with
prefix, if necessary with the international
dialling code). Press §Clear§ to clear the last
digit, press and hold to clear the entire
phone number. To dial press theAkey.
VAR Language: en2; VAR issue date: 050331
A70 ct-e2, A31008-H2770-M7-3-RC19
left page (4) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
4
Making a phone call
End call
Press the End keyBbriefly. Press this key
even if the person on the other end of the
line has hung up first.
Set volume
Use the scroll keyEto start adjusting
the volume during conversation. Set volume withG.
Redial previous numbers
To redial the phone number last called,
press the Call keyAtwice. To redial other
numbers that were dialled previously,
pick out the required phone number from
the list withG, then pressAto dial.
Additional costs will be incurred for the
2nd phone connection.
Conference
b
Make a new connection during a call with
y menu§ ¢ Hold ¢ J (dial a new phone
number).
With y menu§ ¢ Conference you can join
the held call. Repeat this procedure until
all participants are linked together (up to
5 participants).
All calls in the conference are ended simultaneously when the End keyBis
pressed.
Additional costs will be incurred for every
additional phone connection.
When a number is busy
Call menu
For automatically dialling the phone
number for up to 15 minutes at increasing intervals, press §Auto dial§ . For phone
ringing when the busy number is free,
press §Call back§ ( L ). Press §Prompt§ and a
beep will remind you to redial the dispayed phone number after 15 minutes.
Several functions are only available during a call:
y menu§ ¢ Select a function.
Accept call
Switch on
The phone must be switched on (standby
mode). An incoming call will interrupt
any other use of the phone.
Press §Answer§ orA.
If the phone number has been transmitted
by the network, it is displayed. If the number
and the name are stored in the Phonebook,
the corresponding name is displayed instead. If set, an animation can be displayed instead of the bell icon.
Reject call
§Reject§ or B press briefly.
Held call
Make a new connection during a call with
y menu§ ¢ Hold ¢ J (dial new phone
number, also from Phonebook:F). With
§Swap§ you can swap back and forth between both calls.
Direct call
The phone can be locked, so it's only possible to dial a defined number.
§Menu§ ¢ Setup ¢ Security ¢ Direct call
Press §Select§ and enter phone code. When
first prompted you define and enter the
phone code (4 - 8 digits). Please do not forget this code! Confirm input with §OK§ and
press §Change§. Select phone number from
the Phonebook (p. 5) or enter a new one.
With §OK§ confirm On.
Use
Press and hold the right soft key>to
dial.
Switch off
Press and hold ' and enter phone code.
Confirm input with §OK§ and press §Change§.
With §OK§ confirm Off.
iemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
VAR Language: en2; VAR issue date: 050331
A70 ct-e2, A31008-H2770-M7-3-RC19
right page (5) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
Phonebook
Phonebook
New entry
Open Phonebook (in standby mode)
F (select <New entry>) ¢ §Select§
¢ Activate input fields.
Number: Always enter phone number with
an area dialling code.
Name: Enter first name or surname.
Group: Organise entries in groups, select
with §Change§.
Location: Select location: SIM, Mobile or
Protected SIM.
Record no.: This is automatically assigned
to the entry. Change with §Change§.
Press §Save§ to store the new entry.
Siemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
Text entry
Press number key repeatedly until the required letter appears. The cursor advances after a short delay. Example:
Press once for a, twice for b etc.
2
Press and hold to write the
number.
Ä, ä, 1–9 Umlauts and numbers are displayed after the relevant letters.
§Clear§
Press briefly to delete the letter
before the cursor, press and hold
to delete the whole word.
G
Move the cursor (forwards/back).
Press briefly: Switch between:
'
abc, Abc, T9abc, T9Abc, 123. Status
indicator in the top line of the
display.
Press briefly: Select special
*
characters. Press and hold:
Open input menu.
Press once/repeatedly:
0
.,?!’"0-()@/:_
Press and hold: Writes 0.
1
Writes blank. Press twice =
skip line.
5
Call/search for an entry
Open PhonebookF, select name by typing first letter or scroll and dial withA.
Call with record no.
A record number is automatically assigned
to every new entry in the Phonebook.
J Enter record number (in standby
mode) ¢ ' ¢ A
Edit entry
G ¢ Select entry ¢ §Options§ ¢ Edit
¢ G (select required input field)
¢ Make changes ¢ §Save§
Location:
An entry can be moved to different storage locations in the Phonebook.
SIM (standard) ¢
Entries that are stored in the Phonebook
on the SIM card can also be used on a different GSM phone.
Mobile v
Phonebook entries are stored in the
memory of the mobile phone when the
memory of the SIM card is full.
Protected SIM ¡
b
Phone numbers can be stored in protected locations on a special SIM card. A PIN 2
is needed for editing (p. 3).
Groups
If there are many Phonebook entries it is
best to assign them to a group, e.g.:
Family, Friends, VIP, Others
A special ring tone can sound and/or a symbol can be displayed if the phone number
of a call is registered in a group.
Select a group
§Menu§ ¢ Phonebook ¢ <Groups>
¢ G(select a group) ¢ §View§
All entries of the selected group are
displayed.
VAR Language: en2; VAR issue date: 050331
A70 ct-e2, A31008-H2770-M7-3-RC19
left page (6) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
6
Messages (SMS)
Change group assignment
You can assign a Phonebook entry to a
group when you enter it (p. 5).
F ¢ Select entry ¢ §View§ ¢ §Edit§
¢ G(scroll to group) ¢ §Change§
¢ Select a new goup ¢ §Save§
SMS to group
A memo (SMS) can be sent as a "circular"
to all members of a group. Each SMS is
charged separately!
Open <Groups> in Phonebook menu and
scroll to a group.
§Options§ ¢ SMS to group ¢ §Select§
¢ Compose message ¢ A(the group
is displayed) ¢ §OK§ ¢ A
The SMS is sent to the first recipient.
PressAagain to start the next send operation. Each send operation must be confirmed. Individual recipients may be
skipped.
Call to group
b
You can call up to 5 group members one
by one and link them together in a conference (function may need to be enabled
by the service provider).
Open <Groups> in Phonebook menu and
scroll to a group.
§Select§ ¢ Select the entries ¢ §Change§
(mark/unmark entry) ¢ §OK§
The first entry is dialled and the call is put
on hold. ProceedAby calling the next
entry until all marked entries are called.
With §Options§ you can link the calls on hold
in a conference.
Group call tones
You can assign different ringtones to
groups.
§Menu§ ¢ Ring tones ¢ Group tones
¢ Select a group ¢ §Select§
¢ Select ring tone ¢ §Select§
Messages (SMS)
Read messages
A new message is indicated on the display
with ]. Press the control key on the left
to read the message. Scroll through the
message line by line withG.
Reply menu
§Reply§
Open the reply menu.
Inbox/Sent
§Menu§ ¢ Messages ¢ Inbox or Sent
The list of saved messages is shown.
Compose a message
§Menu§ ¢ Messages ¢ New SMS
¢ Write text ¢ A
¢ J/ Q (enter phone number or
select from Phonebook) ¢ §OK§
The SMS is sent to the service centre for
transmission.
Text menu
§Options§ Open the text menu.
Write text fragments
§Menu§ ¢ Messages
¢ Predef. texts ¢ <New entry>
¢ J (write text fragment)
¢ §Save§
Use text fragments
J(write message text) ¢ §Options§
¢ Insert text ¢ G (select text
fragment from the list) ¢ §Select§
The text fragment is inserted into the text
to the left of the cursor.
Text entry with T9
T9 deduces the correct word from the individual key entries by making comparisons with an extensive dictionary. Write a
word and finish it without looking at the
display. Simply press the keys where the
relevant letter is located once. If several
iemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
VAR Language: en2; VAR issue date: 050331
A70 ct-e2, A31008-H2770-M7-3-RC19
right page (7) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
Setup
options are found in the dictionary the
most probably is displayed first. For further options please press the right
softkey.
T9® Text Input is licensed under one or more
of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,
5,945,928 and 6,011,554;
Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;
and additional patents are pending worldwide.
Setup
¢ Setup ¢ Select a function.
Profiles
Siemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
§Menu§
Three profiles are standard with default
settings, they can be changed however:
Normal envi., Quiet environ., Noisy environ.
You can set two personal profiles
(<No Title>).
The special profile Aircraft mode cannot be
changed.
Activate
Select default profile or personal profile
¢ §Select§.
Change sett.
Select profile ¢ §Options§ ¢ Change sett.
The list of available functions is displayed.
Aircraft mode
The phone will automatically switch off if
you select this profile. Even the alarm
tone is deactivated. An alarm is only
shown on the display. It is not possible to
modify this profile.
Normal operation
The next time you switch on the phone
and return to normal operation the default profile will be activated.
7
Display
Language
Set the language of the display text.
"Automatic" will set the language of your
home service provider. Reset to this language in standby status:
*#0000#A
Screensaver
The screensaver shows a picture on the
display as soon as a period that can be set
by you has elapsed. The function is ended
by an incoming call or by pressing any key.
Call setup
Hide ID
b
When switched off, the display of the calling party shows your phone number (dependent on service provider). To suppress
this display, you can activate the "Hide ID"
mode.
Call waiting
b
If you are registered for this service, you
can check whether it is set and you can
activate/deactivate it with Call waiting.
Minute beep
During the call, you will hear a beep after
each minute as a reminder of the time
elapsed.
Divert
You can set the conditions for which calls
are diverted to your mailbox or other
numbers.
Set up call divert (example)
All calls
b
Unanswered calls
b
All calls are diverted. n is shown in the
top line of the display in standby mode.
Includes Unanswered, Not reachable,
No reply, Busy.
§Select§ ¢ Set ¢ J (Enter the phone
number to which the call should be
diverted) ¢ §OK§
VAR Language: en2; VAR issue date: 050331
A70 ct-e2, A31008-H2770-M7-3-RC19
left page (8) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
8
Setup
After a short pause, the setting is confirmed by the network.
Status check
After a short pause the current information is shown.
p
Condition set.
o
Not set.
Display, if status is unknown
.
(e.g. on a new SIM card).
Clear all
All set diversions are cleared.
b
The phone identity number (IMEI) is
displayed.
The phone is reset to the default values
(does not apply to SIM card and network
settings).
Alternative input in standby mode:
*#9999#A
Auto key lock
The keypad is locked automatically if no
key has been pressed for one minute in
standby mode. This prevents the phone
from being used accidentally. However,
you can still be called and you can still
make an emergency call.
Direct call
Only one phone number can be dialled.
Press and hold control key on the right
(p. 4).
b
Your phone is prevented from being used
with a different SIM card.
Barrings
Phone identity
Master reset
Clock
§Menu§ ¢ Setup ¢ Clock
¢ Select a function.
Security
§Menu§ ¢ Setup ¢ Security
¢ Select a function.
This SIM only
All calls in: The phone is blocked from receiving all incoming calls.
When roaming: You do not receive any calls
outside your home network.
Status check: Query the status of your
barrings.
Clear all: Clear all barrings. Password
protected!
b
Network barring restricts the use of your
SIM card.
All calls out: All outgoing calls except
emergency numbers are barred.
Outgo internat: Only national calls can be
made.
Out.int.x home: International calls are not
permitted, except for calls to your home
country.
Network
§Menu§ ¢ Setup ¢ Network
¢ Select a function.
Network info
The list of GSM networks currently available is displayed.
Auto network selection
If activated, the next network is dialled in
the order of your "preferred networks".
Choose network
The network search is restarted.
Pref. network
Set the service providers you prefer when
you leave your home network.
Fast search
Speed up network reconnection.
iemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
VAR Language: en2; VAR issue date: 050331
A70 ct-e2, A31008-H2770-M7-3-RC19
right page (9) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
Ring tones
Ring tones
§Menu§ ¢ Ring tones ¢ Select a function.
Alarm clock
Activate/deactivate
Activate/deactivate the ring tone or reduce it to a short beep.
¢ Alarm clock
The alarm will ring at the time set by you,
even when the phone is switched off.
§On§ / §Off§ Activate/deactivate the alarm.
Volume
Setting
Set the same volume for all ring tones.
G
Set volume.
§OK§
Confirm.
Set time for alarm call (hh:mm), then §OK§.
d Call tone, Group tones, Other tone,
Left soft key
Set the tones to match your needs.
Ringer setting
Alarm tone, Message tone
The ring tones for the stated types of
call/functions can be set separately.
More tones...
Call screening
Siemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
9
b
Only calls from numbers that are in the
Phonebook or in a predefined group are
signalled audibly or by silent alert. Other
calls are only displayed.
Key tones
Set acoustic key acknowledge:
Click or Tone or Silent
Minute beep
During the call, you will hear a beep once
a minute as a reminder.
Info tones
Set service and alarm tones.
§Menu§
Fast access key
You can assign an important phone
number or function to the left soft key.
For example, Games is assigned to the
softkey. To change this (in standby
mode):
§Games§ Press briefly ¢ §Change§
¢ G scroll to the application or Phone
number (select a name from the
Phonebook) ¢ §Select§ Confirm.
Apply (in standby mode) e.g.:
§Games§ Press and hold.
Speed dialling keys (2 to 9)
You can assign a phone number or function to each of the keys from 2 to 9
(speed dialling numbers). Number key 1
is reserved for the mailbox.
Set (in standby mode)
J(Key 2-9) ¢ G scroll to the
application or Phone number (select a
name from the Phonebook) ¢ §Select§
Confirm.
Apply (in standby mode) e.g.:
2
Press and hold .
VAR Language: en2; VAR issue date: 050331
A70 ct-e2, A31008-H2770-M7-3-RC19
left page (10) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
10
Customer Care
Customer Care
We offer fast, individual advice! You have several options:
Our online support on the Internet:
www.siemens.com/
mobilephonescustomercare
We can be reached any time, any place. You are
given 24 hour support on all aspects of our products. Here you will find an interactive fault-finding
system, a compilation of the most frequently
asked questions and answers, plus user guides
and current software updates to download.
When calling customer service, please have
ready your receipt and the phone identity
number (IMEI, to display press #06#), the software version (to display, press #06#, then
§Info§) and if available, your Siemens Service
customer number.
*
*
In some countries repair and replace services are
impossible where the products are not sold through
our authorised dealers.
If repair work is necessary, please contact one of
our service centres:
Abu Dhabi .........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .................................................... 40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brunei ..................................................02 43 08 01
Bulgaria................................................02 73 94 88
Cambodia ............................................12 80 05 00
Canada ........................................1 88 87 77 02 11
Chile..................................................8 00 53 06 62
China ............................................. 021 2301 7188
Colombia....................................01 80 07 00 66 24
Croatia ..............................................0 16 10 53 81
Czech Republic.................................2 33 03 27 27
Denmark ..............................................35 25 86 00
Dubai ................................................0 43 96 64 33
Ecuador ..........................................18 00 10 10 00
Egypt.................................................0 23 33 41 11
Estonia.................................................. 6 30 47 97
Finland ............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany .....................................0 90 01 00 77 00
Greece ............................................80 11 11 11 16
Hong Kong .......................................... 28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland .................................................. 5 11 30 00
India .............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy .................................................02 24 36 44 00
Ivory Coast.......................................... 05 02 02 59
Jordan...............................................0 64 39 86 42
Kenya.................................................... 2 72 37 17
Kuwait ................................................... 2 45 41 78
Latvia .................................................... 7 50 11 18
Lebanon.............................................. 01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 70 07 07 00
Luxembourg........................................ 43 84 33 99
Macedonia .......................................... 02 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
Malta .......................................+ 35 32 14 94 06 32
Mauritius ............................................... 2 11 62 13
Mexico .......................................01 80 07 11 00 03
Morocco .............................................. 22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway................................................ 22 70 84 00
Oman ....................................................... 79 10 12
Pakistan ..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Peru ..................................................0 80 05 24 00
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar................................................... 04 32 20 10
Romania .........................................02 12 09 99 66
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 07 00 80
Singapore ........................................... 62 27 11 18
Slovak Republic ..............................02 59 68 22 66
iemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
VAR Language: en2; VAR issue date: 050331
A70 ct-e2, A31008-H2770-M7-3-RC19
right page (11) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
Product data
Slovenia ............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand ............................................0 27 22 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 64 59 98 98
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 66 03 86
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Venezuela....................................0 80 01 00 56 66
Vietnam...........................................84 89 20 24 64
Zimbabwe ............................................04 36 94 24
Product data
Siemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
Declaration of conformity
Siemens Information and Communication mobile
hereby declares that the phone described in this
user guide is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (R&TTE).
The declaration of conformity (DoC) concerned
has been signed. Please call the company hotline if
you require a copy of the original, or go to:
www.siemens.com/mobiledocs
11
Technical data
GSM class:
Frequency range:
GSM class:
Frequency range:
Weight:
Dimensions:
Li-Ion battery:
Operating temperature:
Standby time:
Talk time:
SIM card:
4 (2 watt)
880–960 MHz
1 (1 watt)
1.710–1.880 MHz
78 g
101×45×20mm
650 mAh
–10 °C to 55 °C
60 h - 230 h
90 min - 250 min
3.0 V
Battery quality
statement
The capacity of your mobile phone battery will reduce each time it is charged/emptied. Storage at
too high or low temperatures will also result in a
gradual capacity loss. As a result the operating
time of your mobile phone may be considerably reduced, even after a full recharge of the battery.
Regardless of this, the battery has been designed
and manufactured so that it can be recharged and
used for six months after the purchase of your mobile phone. After six months, if the battery is clearly
suffering from loss of performance, we recommend
that your replace it. Please buy only Siemens original batteries.
VAR Language: en2; VAR issue date: 050331
A70 ct-e2, A31008-H2770-M7-3-RC19
left page (12) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
12
Care and maintenance
Care and maintenance
SAR
Your phone has been designed and manufactured
to the highest of standards and should be treated
with great care. The suggestions below will help you
to enjoy your phone for many years.
• Protect your phone from moisture and humidity!
Precipitation, humidity and liquids contain minerals that will corrode electronic circuits. Nevertheless, should your phone become wet,
disconnect it immediately from the power supply to avoid electric shock. Do not place your
phone (even to dry it) on/in a source of heat
such as a microwave oven, oven or radiator.
The phone may become overheated and possibly explode.
• Do not use or store the phone in dusty, dirty areas. Its moving parts may become damaged
and the casing may become deformed and discoloured.
• Do not store your phone in hot environments
(e.g. vehicle instrument panel in the summer).
High temperatures can shorten the life of electronic devices, damage batteries and warp or
melt certain plastics.
• Do not store your phone in cold environments.
When the phone warms up again (to its normal
ambient temperature), moisture can form inside
the phone, which may damage electronic circuit
boards.
• Do not drop, knock or shake your phone. Rough
handling can damage internal circuit boards!
• Do not use harsh chemicals, cleaning solvents,
or strong detergents to clean the phone!
The suggestions given above apply equally to your
phone, battery, charger and all accessories. If any
of these parts is not working properly, obtain fast
and reliable help at our service centres (p. 10).
European Union (RTTE) and
international (ICNIRP)
INFORMATION ON RF EXPOSURE / SPECIFIC
ABSORPTION RATE (SAR)
THIS MODEL MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the
independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
The guidelines use a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR
limit for mobile devices is 2 W/kg and was adopted
into the European Standard EN 50360 and into other national standards. The CE mark demonstrates
that the EU requirements are met.
The highest SAR value for this device when tested
at the ear was 0.42 W/kg1. As mobile devices offer
a range of functions, they can be used in positions
other than the head, such as directly on the body.
In this case, the limits are met too.
As SAR is measured utilizing the device's highest
transmitting power, the actual SAR of this device
while operating is typically below that indicated
above. This is due to automatic changes to the
power level of the device to ensure it only uses the
minimum level required to reach the network.
The World Health Organization has stated that
present scientific information does not indicate the
need for any special precautions for the use of mobile
devices. They note that if you nevertheless want to reduce your exposure then you can do so by limiting the
length of calls or using a 'hands-free' device to keep
the mobile phone away from the head and body.
Additional Information can be found on the websites of the World Health Organization
(www.who.int/emf) or Siemens
(www.siemens.com/mobilephones).
1
The tests are carried out in accordance with
international guidelines for testing.
iemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
VAR Language: en2; VAR issue date: 050331
A70 ct-e2, A31008-H2770-M7-3-RC19
right page (13) of A70 Dorado, 140mm, en2, A31008-H2770-M7-3-RC19 (28.06.2005, 11:44)
Accessories
Accessories
Available Accessories are:
Fashion & Carry
Tour Case FCT-650
Belt Case FCL-600
Energy
Li-Ion Battery EBA-510
Travel Charger EU ETC-500
Travel Charger UK ETC-510
Car Charger Plus ECC-600
Desk Top Stand EDS-600
Handsfree Portable
Siemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Main.fm
Headset Basic HHS-500
Headset HHS-510
Headset Purestyle HHS-610
Car Solutions
Car Kit Portable HKP-500
Car Kit Easy HKP-700
Car Kit Easy Upgrade HKO-700
Products can be obtained in specialist
shops or you can visit the Siemens Mobile
Store online:
Siemens Original Accessories
www.siemens.com/shop
13
VAR Language: en2; VAR issue date: 050331
A70 ct-e2, A31008-H2770-M7-3-RC19
A70 ct-e2, A31008-H2770-M7-3-RC19
A70 ct-e2, A31008-H2770-M7-3-RC19
s
Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
Remember to comply with legal requirements and local restrictions
when using the phone. For example
in aeroplanes, petrol stations, hospitals or while driving.
The ringtone, info tones and handsfree
talking are reproduced through the
loudspeaker. Do not hold the phone to
your ear when it rings or when you
have switched on the handsfree function. Otherwise you risk serious permanent damage to your hearing.
Mobile phones can interfere with
the functioning of medical devices
such as hearing aids or pacemakers. Keep at least 20 cm/9 inches
between phone and pacemaker.
When using the mobile phone hold
it to the ear which is further away
from the pacemaker. For more
information consult your doctor.
Do not place the phone near to electromagnetic data carriers such as
credit cards and floppy disks. Information stored on them could be lost.
You may only open the phone to replace the battery (100 % mercuryfree), or SIM card. You must not
open the battery under any circumstances. All other changes to this
device are strictly prohibited and
will invalidate the guarantee.
Small parts such as the SIM card,
sealing stop, lens ring and lens cap
can be dismantled and swallowed
by small children. The phone must
therefore be stored out of the reach
of small children.
The mains voltage specified on the
power supply unit (V) must not be
exceeded. Otherwise the charging
device may be destroyed.
The power supply must be plugged
into an easily accessible AC mains
power socket when charging the
battery. The only way to turn off the
charging device after charging the
battery is to unplug it.
Only use original Siemens batteries
(100 % mercury-free) and – charging devices. Otherwise you risk serious damage to health and
property. The battery could exRef.No.: A31008-H2770-M7-3-RC19
*A5B00075612530*
Please turn off your phone in open
spaces in storms.
Important
Please dispose of unwanted batteries and phones as permitted by the
laws in your country.
The phone may cause interference in
the vicinity of TV sets, radios and
PCs.
Use only Siemens original accessories. This will avoid potential risks to
health or property and ensure compliance with all relevant regulations.
Improper use will invalidate the guarantee!
These safety instructions also apply to Siemens
original accessories.
iemens AG 2004, \\Fileserver\users\Siemens MP\Dorado\E2\Dorado_Security.fm
VAR Language: en2; VAR issue date: 050331
left page (14) of A70 Dorado, 140mm,
en2, A31008-H2770-M7-3-RC19
(28.06.2005, 11:26)
A70 ct-e2,
A31008-H2770-M7-3-RC19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising