DIMENSION IR Camera 75.0mm Operating Instruction M o d e l N O :PZ0012 93.0mm INSTALLATION 1 2 Holder Spherical Object Loop Lock 3 Thank you for your purchase PZ series product. Before operating the unit, please read this instruction manual carefully to ensure proper use of the product. Please store this instruction manual in a safe place for future reference after you have read it. PRODUCT FEATURE 1.20 Built-in Infrared Lights 2.Electronic Shutter Control 3.Auto White Balance 4.High Picture Quality Video LinePower Line Screw Hole 1、Take hold of the spherical object and take it out. 2、Hold the Loop Lock on the base, and squeeze it hardly inward to separate the holder from the base. 3、Use screws to install the base to the place it needs. 4、Install the spherical object and its holder to the base and adjust the lens to the right angle. AVAILABLE MODELS Serson 1/4 SHARP CCD 1/4 SONY CCD Model No CAUTION FOR SAFE OPERATION 1. Power supply (1) Use only with a 12V DC power supply (2) Be sure to connect each lead to the appropriate terminal. Wrong connection may cause malfunction and /or damage to the video camera. 2. Operating and storage locations (1) Do not attempt to aim the camera at the sun or other extremely bright objects that cause smear to appear irrespective of whether the camera is operating or not. This can damage the CCD (Charge Coupled Device). (2) Do not place the camera in the following locations. Locations subjected to extremely high or low temperatures. Locations subjected to high levels of humidity and dust. Locations where there are large amounts of water vapor and steam. Locations subjected to excessive vibrations. (3) When this camera is installed near the equipment like wireless communication device which emits strong electromagnetic field, some irregularity such as noise on monitor Screen may happen. (4) When plugging the power cord to and electric outlet, be sure to leave enough space around the outlet for easy access to the outlet for later turning the power on and off. 3. Handing of the unit Do not allow the camera to be subjected to strong impacts or shocks.The camera could be damaged by improper handing or storage. ·Never attempt to disassemble or modify the camera. ·If an abnormality should happen to occur, immediately turn off the power and consult your dealer. 4 1/3 SHARP CCD 1/3 SONY CCD Pz0012 TV Lines 4 2 0 TV Line 540 TV Line 540 TV Line 600 TV Line SPECIFICATIONS TV System Sync System Mini Illumination White Balance Model Range PAL/NTSC Internal 0Lux AUTO 3200~10000 K Gain Control AUTO S/N Ratio >50dB Electronic Shutter Video Out Gamma Correction Lens Operation Temp Dimensions 1 / 5 0 ~ 1 / 1 2 , 0 0 0 second Composite output 1.0V p-p at 75 odm 0.45 3.6/6mm -10 C~50 C 7 5 m m ( H ) * 9 3 mm ( Power DC12V IR range 20m Weight 200g ) * Design and specifications are subject to change without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project