Samsung | A127 - SGH Cell Phone | User guide | Samsung A127 - SGH Cell Phone User guide

Samsung A127 - SGH Cell Phone User guide
SGH-a127 Series
P O R T A B L E
M O B I L E
D u a l - B A N D
P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating there to (the
“Phone System”), is proprietary to Samsung and protected under federal laws, state
laws, and international treaty provisions. Intellectual Property includes, but is not
limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured by
the Intellectual Property. Moreover, you agree that you will not (and will not attempt
to) modify, prepare derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No title to or
ownership in the Intellectual Property is transferred to you. All applicable rights of
the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1000 Klein St.
Richardson, TX 75082
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2007 Samsung Telecommunications America, LLC is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System
(Automated Response System) at:
www.samsungwireless.com/support
GH68-15026A
Printed in Korea
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
A127_UCGG5_JS_081507_F3
Table of Contents
Section 1: Getting Started ..........................................................................4
Activating Your Phone ...............................................................................................4
Powering On or Off the Phone ...................................................................................7
Setting Up Your Voice Mail ........................................................................................7
Section 2: Understanding Your Phone .......................................................9
Features of Your Phone .............................................................................................9
Closed View of Your Phone .....................................................................................10
Open View of Your Phone ........................................................................................11
Internal Display Layout ...........................................................................................13
Selecting Functions and Options .............................................................................14
Command Keys ......................................................................................................14
Section 3: Call Functions .........................................................................17
Making a Call ..........................................................................................................17
Adjusting the Call Volume .......................................................................................18
Answering a Call .....................................................................................................19
Recent Calls ...........................................................................................................19
Data Volume ...........................................................................................................21
Data Call Time ........................................................................................................21
Silent Mode ............................................................................................................22
Options During a Call .............................................................................................. 22
Section 4: Menu Navigation .....................................................................26
Menu Navigation .....................................................................................................26
Menu Outline ..........................................................................................................27
Section 5: Entering Text ...........................................................................34
Changing the Text Input Mode ................................................................................34
Using T9 Mode .......................................................................................................35
Using Alphabet Mode .............................................................................................. 36
Entering Symbols ....................................................................................................37
Using Numbers .......................................................................................................37
Section 6: Understanding Your Address Book .........................................38
Using Contacts List .................................................................................................38
Adding a New Contact ............................................................................................39
Groups ....................................................................................................................43
Edit Group ..............................................................................................................43
Speed Dial List .......................................................................................................44
Reject List ..............................................................................................................45
Finding My Own Phone Number ..............................................................................47
Management ..........................................................................................................47
Using the Service Dialing Numbers .........................................................................48
1
Section 7: Messaging ............................................................................. 50
Types of Messages .................................................................................................50
Creating and Sending New Messages .....................................................................50
Settings ..................................................................................................................56
Using Browser Messages ........................................................................................57
Memory Status .......................................................................................................58
Section 8: Changing Your Settings ......................................................... 59
Set Sound ...............................................................................................................59
Set Display .............................................................................................................61
Set Time & Date ......................................................................................................62
Set Phone ...............................................................................................................63
Network Services ....................................................................................................67
Reset Settings .........................................................................................................69
Section 9: AT&T Mall ............................................................................... 71
Shop Tones .............................................................................................................71
Shop Games ...........................................................................................................71
Shop Graphics ........................................................................................................72
Shop Multimedia Content ........................................................................................72
Shop Applications ...................................................................................................73
Accessing the MEdia Net Home ...............................................................................73
Section 10: Tools ...................................................................................... 74
Alarms ....................................................................................................................74
Camera ...................................................................................................................75
Calendar .................................................................................................................78
To Do List ...............................................................................................................79
Voice Memo ............................................................................................................79
Calculator ...............................................................................................................80
Currency Converter .................................................................................................81
World Time .............................................................................................................81
Section 11: My Stuff Folder ..................................................................... 82
Ringtones/Audio ......................................................................................................82
Graphics .................................................................................................................82
Delete .....................................................................................................................83
Memory Status .......................................................................................................84
Section 12: Games ................................................................................... 85
Shop Games ...........................................................................................................85
Shop Applications ...................................................................................................85
My Games ..............................................................................................................86
Table of Contents
2
Section 13: WAP ........................................................................................87
Launching the WAP Browser ...................................................................................87
Access a WAP Site ..................................................................................................87
Navigating the WAP Browser ...................................................................................88
Using Favorites .......................................................................................................89
Downloading Multimedia Files ................................................................................90
Clearing the Cache .................................................................................................90
Section 14: Health and Safety Information ..............................................92
Health and Safety Information .................................................................................92
Samsung Mobile Products and Recycling ................................................................94
UL Certified Travel Adapter .....................................................................................94
Consumer Information on Wireless Phones .............................................................94
Road Safety ..........................................................................................................101
Responsible Listening ...........................................................................................102
Operating Environment .........................................................................................104
Using Your Phone Near Other Electronic Devices ...................................................104
Potentially Explosive Environments .......................................................................106
Emergency Calls ...................................................................................................106
FCC Notice and Cautions .......................................................................................107
Other Important Safety Information .......................................................................107
Product Performance ............................................................................................ 108
Availability of Various Features/Ring Tones ...........................................................109
Battery Standby and Talk Time .............................................................................109
Battery Precautions ..............................................................................................109
Care and Maintenance ..........................................................................................111
Section 15: Accessibility ........................................................................112
Section 16: Warranty Information ..........................................................113
Standard Limited Warranty ...................................................................................113
Index .........................................................................................................118
3
Activating Your Phone
Section 1: Getting Started
Topics Covered
• Activating Your Phone
• Powering On or Off the Phone
• Setting Up Your Voice Mail
This section describes how to start using your phone by activating your service and
setting up your voice mail.
Activating Your Phone
When you subscribe to a cellular network, a plug-in SIM card is provided loaded with
your subscription details, such as your PIN and other optional services.
Removing the Battery
1. If necessary, power-off the phone by holding down the
key until the
power-off image displays.
2. Remove the battery by pressing the battery lock down and slide the battery
cover away, as shown.
Installing the SIM Card
Important!: The plug-in SIM card and its contacts can be easily damaged by scratches or bending. Use
caution when inserting or removing the card and keep all SIM cards out of reach of children.
Make sure the gold contacts of the card face into the phone, then slide the SIM card
into the socket.
Getting Started
4
Removing the SIM Card
To remove the SIM card, slide it away from socket. See the following illustration.
Installing the Battery
1. Align the battery tabs with the slots at the bottom of the phone.
2. Press the battery down until it clicks into place. Make sure that the battery
is properly installed before switching on the phone.
3. With the battery in position on the phone, place the cover back on the
handset and slide it in until it clicks.
5
Activating Your Phone
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. Use the travel adaptor to
charge the battery, and use only Samsung approved batteries and chargers.
Note: You must fully charge the battery before using your phone for the first time. A fully discharged battery
requires up to 4 hours of charge time.
Note: For connection to an electrical supply not located in the U.S., you must use an adaptor of the proper
configuration for the power outlet. Use of the wrong adaptor could damage your phone and void your
warranty.
1. Plug the connector of the travel adaptor into the jack on the side of the
phone.
2. Plug the adaptor into a standard AC wall outlet. When charging is finished,
unplug the adaptor from the power outlet.
3. Remove the adaptor from the charger port.
Getting Started
6
Note: You must unplug the adaptor before removing the battery from the phone during charging to avoid
damage.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain, a warning tone
sounds and the “Low Battery” message repeats at regular intervals on the display.
The backlight turns off to conserve the remaining battery power.
When the battery level becomes too low, the phone automatically turns off.
Powering On or Off the Phone
1. Open the phone.
2. Press and hold the
key until the phone power-on screen displays.
3. If the phone is locked, enter the phone password and press the OK soft key
or the
key. The password is preset to “00000000” at the factory. For
further details, see "Change Phone Password" on page 65.
4. If the phone asks for a PIN, enter the PIN and press the OK soft key or the
key. For further details, see "Check PIN Code" on page 64.
The phone searches for your network and after finding it, the Idle screen
displays. Now, you can make or receive calls.
Note: The display language is preset to Automatic at the factory. To change the language, use the
Language menu. For further details, see "Language" on page 63.
5. When you wish to switch off the phone, press and hold the
key until
the power-off image displays.
Setting Up Your Voice Mail
To access your voice mail from your keypad or the Main Menu to set up your Voice
Mail options, use the following steps:
1. Open the phone to access your keypad.
2. From an Idle screen, press and hold the
key.
-OR3. In Idle mode, press the Menu soft key to access Menu mode.
4. Highlight Recent Calls and press the
key.
5. Highlight Voice Mail and press the
Select soft key or the
6. Highlight Connect to Voice Mail and press the
the
7
key.
OK soft key or
key.
Setting Up Your Voice Mail
7. Follow the voice mail system prompts to the voice mail menu, then select
option 4 to set up your voice mail personal options:
• Turn Notification On/Off
• Change Administrative Options
• For Greeting or Recorded Name
• Change Notification Options
Changing the Voice Mail Number
Your SIM card gives you default service number of the Voice Mail Center. However,
you may need to change the number.
Note: Contact your service provider customer support before changing the service number of the Voice Mail
Center as changing your Voice Mail service number may affect your Voice Mail service.
Use the following procedures to change your voice mail number.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Recent Calls and press Select soft key or the
key.
3. Highlight Voice Mail and press the Select soft key or the
key.
4. Highlight Voice Server Number and press the OK soft key or the
key.
5. Highlight Voicemail and press the OK soft key or the
key.
6. Highlight Edit Number. Press the Edit soft key or the
key to modify
the number.
7. Enter or correct your Voice Server number and press the OK soft key to
save.
8. Press the
key to return to Idle mode.
Getting Started
8
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Closed View of Your Phone
• Open View of Your Phone
• Internal Display Layout
• Selecting Functions and Options
• Command Keys
This section outlines some key features of your phone. It also displays the screen
and the icons that are displayed when the phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many significant features. The
following list outlines a few of the features included in your phone.
User friendly, menu driven access to features and options.
• Text Messaging capability
• Multimedia capability
• Speakerphone capability
• Featured tools provide Alarms, Camera, Calendar, To Do List, Voice Memo,
Calculator, Currency Converter, and World Time.
9
Closed View of Your Phone
Closed View of Your Phone
Keys
The following list correlates to the open and front view illustrations.
1. Front LCD: Your phone has an external display on the front of the phone. It
indicates when you have an incoming call or message. It also displays
date, time, reception, battery power, and any icons associated with alerts,
such as messages, or a set alarm.
2. Power Interface Connector/Headset jack: The power interface
connector is used to plug in the charging accessories. The Headset jack
allows you to plug in a headset for safe, convenient, hands-free
conversations.
3. Camera key: launches the camera to take a photo.
4. Camera lens: the camera lens is used for taking photos.
Back Light
A back light illuminates the display and the keypad when you press any key or open
the phone. It turns off when no keys are pressed within a given period of time, and/
or dims the light, depending on the settings in the Back Light menu.
Understanding Your Phone
10
Open View of Your Phone
The following illustrations show the main elements of your phone:
Keys
The following list correlates to the open and front view illustrations.
1. Display: This screen displays all the information needed to operate your
phone.
2. Soft key: Performs the functions indicated by the screen text on the
bottom of the display.
3. Send key: Allows you to place or receive a call. In standby mode, press the
key once to access the Recent Call log. If you press and hold the key down,
you will initiate the most recent call from the Recent Call log.
4. Volume/Menu Navigation key: Allows you to adjust the ringer volume in
standby mode or adjust the voice volume during a call. The volume key can
also be used to scroll up or down to navigate through the different menu
options. To mute the ringer during an incoming call, press the volume key
up or down.
11
Open View of Your Phone
5. Voice Mail key: Press and hold the
key to automatically dial your
voice mail.
6. Alphanumeric keypad: Use these keys to enter numbers, letters and
characters.
7. Special Function keys: Asterisk/Shift key-enters the [ ] character for
*
calling features. In text mode, press to change the character input type.
Pound/Space/Quiet Mode key-enters the pound [#] character for calling
features. In text entry mode, press to enter a space between characters.
Press and hold to place handset in Quiet mode.
8. Microphone: The Microphone allows the other callers to hear you clearly
when you are speaking to them.
9. Clear key: Deletes characters from the display when you are in text entry
mode. When in a main menu, press to return to the previous menu.
A quick press of the Clear key while in Idle mode displays the Calendar in
Month view.
10. Power on/off/Menu Exit key: Ends a call. Press and hold this key for a
few seconds to power your phone On or Off. While in the main menu, it
returns the phone to standby mode and cancels you input. When you
receive an incoming call, press to reject call.
11. Navigation keys: This key allows you to scroll through phone menu
options and provides a shortcut to phone functions from standby mode.
12. WAP Browser/Menu confirm key: When navigating through a menu
accepts the highlighted choice in the menu. If you press once in Idle mode,
the WAP browser will launch.
13. Earpiece: Used to listen to audio from your phone.
Understanding Your Phone
12
Internal Display Layout
The display has 3 areas:
Icons
Shows the received signal strength. The greater the number of
bars, the stronger the signal.
Appears when a new text message has been received.
Appears when a new voice mail has been received.
Appears when a new multimedia message has been received.
Appears when you set an alarm to ring at a specified time. For
details, see "Alarms" on page 74.
Appears when you there is no network coverage available, or
when the phone is in Airplane Mode, see "Airplane Mode" on
page 67.
Appears when a call is in progress.
Appears when you are connected to a WAP service.
Appears when the Call Forwarding feature is active. For details,
see "Call Forwarding" on page 67.
Appears when incoming call Alert Type is set to Vibration.
13
Selecting Functions and Options
Appears when an incoming call Alert Type is set to Vibration
then Melody.
Appears when Silent Mode, Mute is active.
Appears when Silent Mode, Vibration is active.
Shows the level of your battery. The more bars you see, the
more power you have remaining.
Selecting Functions and Options
Your phone offers a set of functions that can be customized for your ease and
specific needs. These functions are arranged in menus and sub-menus, accessed
using the two soft keys. Each menu and sub-menu allows you to view and alter the
settings of a particular function.
In some functions, you may be asked for a password or PIN. Enter the code and
press the Select soft key or the
key.
When you access a list of options, your phone highlights the currently active option.
If, however, there are only two options, such as On/Off or Enable/Disable, your
phone highlights the option that is not currently active, so that you can select it
directly.
Selecting Options
To view the various functions and options available and to select the one you want:
• Press the appropriate soft key.
• To select the function displayed or the option highlighted, press the Select soft key
or the
key.
• To view the next function or highlight the next option on a list, press the Down
Navigation key or the
key on the left side of the phone.
• To move back to the previous function or option on a list, press the Up Navigation
key or the
key on the left side of the phone.
• To move back up one level in the menu structure, press the Back soft key.
• To exit the menu structure without changing the settings, press the
key.
Command Keys
Functions for the soft keys are defined by what appears above each in the display.
There are two soft keys, the left soft key
and the right soft key
.
Understanding Your Phone
14
Soft Keys
The roles of the soft keys vary depending on the function you are currently using; the
labels on the bottom line of the display just above each key indicate their current
role.
Left Soft Key
Some functions of the left soft key are as follows.
• In the Idle screen, press the Menu (left) soft key
to open the Menu screen.
• When in a menu mode, the left soft key
function is Select.
Right Soft Key
Some functions of the right soft key are as follows.
• In the Idle screen, press the Options soft key
to open the Options Menu
screen.
• When in a menu mode, the right soft key
function is Back.
Clear Key
The CLR key
is used to erase or clear numbers, text, or symbols from the
display. You can also use
to return to a previous menu or to return to standby
mode from any menu.
• If you enter an incorrect character, briefly press
to backspace (and delete)
the character.
• To erase the entire sentence, press and hold
.
• To back up one menu level, briefly press
.
• To display the Calendar in Month view, briefly press
while in Idle mode .
End Key
The End key
is used to turn on/off your phone, disconnect calls, and return to
the standby mode.
• Press and hold the End key
to turn on your phone.
• Briefly press
once to disconnect a call.
• Press
to return to standby mode from any menu, or to cancel the last input.
Send Key
The Send key
is used to answer calls, dial calls, and to recall the last number(s)
dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
to make a call.
15
Command Keys
• Briefly press
in standby mode to display a list of recent calls to and from your
phone.
• Press
• Press
twice in standby mode to call the most recent number.
to pick up a waiting call.
Navigation Key
Use the directional keys on the navigation key to browse menus, sub menus, and
lists. Press the Up or Down navigation when jumping to highlighted links on the
web.
Each key also acts as a shortcut to launch applications.
Speakerphone Key
During a call, use the speakerphone key
to activate the speakerphone
operation. Use the volume keys (located on the left side of your phone) to adjust the
volume.
Understanding Your Phone
16
Section 3: Call Functions
Topics Covered
• Making a Call
• Adjusting the Call Volume
• Answering a Call
• Recent Calls
• Data Volume
• Data Call Time
• Silent Mode
• Options During a Call
This section describes how to make or answer a call. It also includes the features
and functionality associated with making or answering a call.
Making a Call
When the Idle screen displays, enter the area code and phone number, and press the
key.
Note: When you activate the Auto Redial option in the Extra Settings menu, the phone will automatically
redial up to 10 times when the person does not answer the call or is already on the phone. For more
information, see "Extra Settings" on page 66.
Making an International Call
1. Press and hold the
key. The + character appears.
2. Enter the country code, area code, and phone number. Press the
key.
Correcting a Dialed Number
Use the following steps to correct a mis-typed entry when dialing.
1. After dialing a number
• To clear the last digit displayed, press the
key.
• To clear another digit in the number, press the Left or Right navigation key until
the cursor is immediately to the right of the digit to be cleared. Press the
key.
17
Adjusting the Call Volume
• To enter a missing digit press the Left or Right navigation key until the cursor is
in position and enter the digit.
• To clear the whole display, press and hold the
key. The Idle screen displays.
2. Press the
key to return to the Idle screen.
Ending a Call
When you want to finish your call, briefly press the
phone.
key or simply close the
Redialing the Last Number
All incoming, outgoing and missed calls are listed in the Recent Calls Menu. If the
number or caller is listed in your Address Book, the name associated displays.
To access the Recent Calls menu:
1. From the Idle Screen, press
Recent Calls and press
Menu. Use the navigation keys to highlight
Select.
2. Use the Up and Down navigation keys to scroll through the Recent Calls
options. Choose from Missed Calls, Calls Made, Calls Received, or Voice
Mail.
3. From the Idle Screen, press the
key to display a list of the most recent
numbers used in the order you dialed or received them.
4. Use the Up and Down navigation keys to scroll through the numbers until
the number you want highlights.
5. To dial the number, highlight the number and press the
key.
Making a Call from the Address Book
You can store phone numbers that you use regularly on the SIM card or in the
phone’s memory. These entries are collectively called the Address Book.
Once you have stored a number in the Address Book, you can dial it by pressing a
few keys using the Speed Dial feature.
For further details about the Address Book feature, see "Finding an Address Book
Entry" on page 38.
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume, use the Volume keys on the
left side of the phone.
Press the
level.
key to increase the volume level and the
key to decrease the
Call Functions
18
In Idle mode, you can also adjust the ringer volume using these keys.
Answering a Call
When a call is received, the phone rings and displays the caller’s phone number, or
name, if stored in the Address Book.
1. From the Idle Screen press the
key or the Accept soft key to answer
the incoming call.
If the Settings>Set Phone>Extra Settings - Anykey Answer option is
activated, you can press any key to answer a call except the
key and
the Reject soft key.
If the Settings>Set Phone>Extra Settings - Open to Answer option is
activated, you can answer the call simply by opening the phone.
Note: To reject an incoming call, press and hold either the Up or Down Volume keys on the left side of the
phone before opening the phone. A quick press of side volume key silences ringer on incoming call.
2. End the call by closing the phone or by pressing the
key.
Note: You can answer a call while using the Address Book or menu features. After ending the call, the
phone returns to the function screen you were using.
Recent Calls
The phone stores the numbers of the calls you’ve dialed, received, or missed in the
Recent Calls menu. If the number or caller is listed in your Address Book, the name
associated displays.
Viewing Missed Calls
The number of calls you have missed displays on the Idle screen when a call is
missed. To view the number details, use the following steps:
1. If the phone is closed, open the phone.
2. Press the View soft key. The most recent missed call displays.
Note: If there is a voicemail sent by the same number, associated icons display and can be selected.
3. To scroll through the missed calls, press the Up or Down navigation key.
Accessing Your Voice Mail
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Recent Calls and press the
19
key.
Recent Calls
3. Highlight Voice Mail and press the
key.
4. Highlight Connect to Voice Server and press the OK soft key or the
key.
5. When connected, follow the voice prompts from the voice mail center.
Deleting a Missed Call
To delete a missed call entry, use the following steps:
1. Immediately after missing a call, the LCD displays a Missed Call window,
that includes the phone number, date and time, and contact (if the contact
is in your Address Book). Press the View soft key to see call details. Press
the Exit soft key to view later.
2. Press the Details soft key to see the date and time of the call.
3. Press the Options soft key and select Delete.
4. Press the Select soft key, or the
key.
5. At the “Delete?” prompt, press the Yes soft key to confirm deletion or No
to cancel.
-OR1. From the Idle Screen, press
Recent Calls and press
Menu. Use the navigation keys to highlight
Select.
2. Highlight the Missed Calls option, and press the
Select or the
key.
3. Continue as above.
You can press the
key at any time to exit the Missed Call feature.
Call Time
1. From the Idle Screen, press
Recent Calls and press
Menu. Use the navigation keys to highlight
Select.
2. Highlighted Call Time and press the Select soft key or the
key.
3. The following options that are available.
• Last Call Time: shows the length of time for the last call.
• Total Sent: shows the total length of time for the calls made.
• Total Received: shows the total length of time for the calls received.
• Reset Time: allows you to reset the call timers.
4. Highlight the Reset Time option, press the OK soft key.
5. Enter the password “00000000” and press the OK soft key to reset the call
timers.
Call Functions
20
6. Press the Back soft key or the
key to end.
Data Volume
1. From the Idle Screen, press
Recent Calls and press
Menu. Use the navigation keys to highlight
Select.
2. Highlighted Data Volume and press the Select soft key or the
key.
3. Use the Up and Down navigation keys to view the following information:
• Last Sent Data: shows the size of the last data packet (measured in KB kilobytes) sent by the phone since the last time this counter was reset.
• Last Received Data: shows the size of the last data packet (measured in KB kilobytes) received by the phone since the last time this counter was reset.
• Total Sent Data: shows the size of the total data packet (measured in KB kilobytes) which have been sent by the phone since the last time this counter
was reset.
• Total Received Data: shows the size of the total data packet (measured in KB kilobytes) which have been received by the phone since the last time this counter
was reset.
• Reset Data Volume: allows you to reset the total amount of data sent and
received by the phone.
4. Highlight the Reset Data Volume and press the OK soft key.
5. Enter the password "00000000" and press the OK soft key to reset the call
timers.Press the Back soft key or the
key to end.
Data Call Time
1. From the Idle Screen, press
Recent Calls and press
Menu. Use the navigation keys to highlight
Select.
2. Highlighted Data Call Time and press the Select soft key or the
key.
3. The following options are available:
• Recent Time: shows the time used for the last data call sent or received.
• Total Time: shows the total time used to send or receive data.
• Reset Data Call Time: allows you to reset the amount of time used for data
calls.
4. Highlight the Reset Data Call Time and press the OK soft key.
5. Enter the password "00000000" and press the OK soft key to reset the call
timers.
6. Press the Back soft key or the
21
key to end.
Silent Mode
Silent Mode
Silent mode is convenient when you wish to stop the phone from making noise, such
as in a theater or a meeting. You have two options: set the phone to vibrate or mute.
To set which of the Silent Mode options will activate:
1. From the Idle Screen, press
Settings and press
Menu. Use the navigation keys to highlight
Select.
2. Highlight Set Sound and press the Select soft key or the
3. Highlight Silent Mode option, then press the
key.
Select key or the
key.
4. Press the Back soft key or the
key to end.
In Idle mode, press and hold the
key until the “Vibration All Activated” or the
“Silent All Activated” message displays, and the
(Vibration) or the
(Mute)
Silent Mode icon displays. You may also press the Volume key on the side of the
phone until it is set to 0, which also activates Silent Mode.
In Silent mode, your phone will respond one of two ways, depending on how you
have set the Silent All feature: it will vibrate and light up the external LCD display
(Vibration), or just light the external LCD display
(Mute).
To exit and reactivate the previous sound settings, press and hold the
key again
until “Silent All Deactivated” or “Vibration All Deactivated” displays. The appropriate
icon no longer displays.
Options During a Call
Your phone provides a number of control functions that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can also make
another call while you have a call in progress if your network supports this service.
To put a call on hold:
1. While on a call, press the Hold right soft key. A message containing the
phone number and the information that the call is on hold displays on the
main screen.
2. You can reactivate the call whenever you want by pressing the Unhold soft
key.
Call Functions
22
To make a call while you have a call in progress:
1. Place the active call on hold using the previous procedures, and enter the
phone number that you wish to dial or look it up in the Address Book.
2. Press the
key to dial the second call.
When you have an active call and a call on hold, you may switch between
the two calls, changing the one on hold to active and placing the other on
hold. To switch between the two calls, simply press the Swap soft key.
The current call is placed on hold and the call on hold is reactivated so that
you can continue conversing with that person.
In Call Options
During a call, press the Options soft key to access the following:
• Speaker On: allows you to enable the speakerphone option. The speakersphone is
toggled On/Off by use of the
key.
• Whisper On: alllows you to enable the whisper mode. Whisper mode increases the
sensitivity of the microphone so that you do not need to speak above a whisper to
be heard (like in a theater).
• Menu: allows you to access the Main Menu while on a call.
• Mute: allows you to mute the voice microphone. Used if you are on a call and wish
to speak to another party without the person on the other end of the line hearing
you.
• Mute Keys: Silences the key tones when on the call.
• Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you
have selected.
• Address Book: access the Address Book information.
Multi-Party Calls
This phone supports multi-party calls. A multi-party call is one of two situations: you
place one call on hold and answer a second call when notified by a call waiting tone,
or where you answer multiple calls and join them (provider-dependent). The
following options then display with the in call options, under the Options left soft
key:
• Join: joins the calls you have established with your phone into a multi-party call.
(provider-dependent)
• Transfer: transfers an incoming call to another number, if supported by your
service provider and set up in your phone settings.
• End Held Call: allows you to end the call on hold.
23
Options During a Call
If you are in a multi-party call, use the following process:
1. As each call comes in, either press the
key or the Accept soft left key.
As you answer a call, the previous call is put on hold.
2. Press the Options key and choose your option. If you choose Join, the
calls are joined into a multi-party call, and the following option become
available:
• Select One: allows you to select a calls in a multi-party call. The phone displays
the phone numbers joined in the multi-party call. Once selected, press the Select
soft option key, and the following options become available:
- Private: the selected party becomes a private call.
- Remove: the selected call is removed from the multi-party call, and ends only
that call.
When you want to finish, end each call normally by pressing the
key.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that the other person
cannot hear you.
Example: You wish to say something to a person in the room, but do not want the person on the phone to
hear you.
During a call, to switch the microphone off temporarily:
1. Press the
Options soft key. Select option 4, Mute.
2. Press the
Options soft key. Select option 4, Unmute to deactivate the
Mute function.
Muting Sending Key Tones
These options allow you to turn the key tones off or on. If the Mute Keys option is
selected, your phone does not transmit the DTMF (Dual Tone Multi-Frequency) tones
of the keys, which allows you to press keys without hearing distracting key tones
during a call.
Note: To communicate with answering machines or computerized telephone systems, the Send Keys
option must be selected.
Searching for a Number in Address Book
You can search for a number in Address Book during a call.
1. Press the Options soft key.
2. Press the Down key to highlight the Address Book option.
Call Functions
24
3. Press the OK soft key or the
key.
4. The Contact List is displayed. To access a contact, use the Up and Down
Navigation keys to highlight the contact number, then press the View soft
key or the
key
-OREnter the first few letters of the name to display entries listed starting with
the first entry matching your input, then use the Up and Down Navigation
keys to highlight an entry.
5. To view the highlighted entry, press the
View soft key.
For further details about the Address Book feature, see "Finding an Address Book
Entry" on page 38.
Call Waiting
The Call Waiting feature allows you to answer an incoming call while you have a call
in progress, if this service is supported by the network, and you have set the Call
Waiting-Voice Calls Menu to Activate. You are notified of an incoming call by a call
waiting tone.
To answer a call while you have a call in progress:
1. Press the
key or the Accept soft key to answer the incoming call. The
first call is automatically put on hold.
2. To switch between the two calls, press the Swap soft key. You may also
join the calls into a multi-party call by pressing the Options soft key and
selecting the Join option.
3. To end a call on hold, you must take the call off of hold by pressing the
Unhold right soft key, then press the
key. If you are in a multi-party
call, press the Options left soft key, and select the Select One option, and
then select Remove. This ends that specific call while leaving the other
call active.
4. To end the current active call, press the
25
key.
Menu Navigation
Section 4: Menu Navigation
Topics Covered
• Menu Navigation
• Menu Outline
This section explains the menu navigation for your phone. It also includes an outline
of all the available menus associated with your phone.
Menu Navigation
Menus and sub-menus can be accessed by scrolling using the Navigation keys or by
using the shortcut keys.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Scroll using the Navigation keys to reach a main menu option, Settings for
example. Press the Select soft key or the
key to enter the menu.
3. If the menu contains sub-menus, such as the submenu options under
Settings, you can access them by highlight the option and by pressing the
Select soft key or the
key. If the menu that you have selected
contains further options, repeat this step.
4. To scroll through the menus, press the Up or Down navigation key or the
Volume key (located on the left side of your phone). Press the Select soft
key, or the
key to make your selection.
5. To return to the previous menu level, press the Back soft key, the
6. To exit the menu without changing the settings, press the
key.
key.
Menu Navigation
26
Using Shortcuts
Numbered menu items, such as menus, sub-menus, and options can be quickly
accessed by using their shortcut numbers. In Menu mode, Main Menus can be
accessed by pressing the number keys (1 to 0) corresponding to their location on the
screen.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the
key for Settings.
3. Press the
key for Set Phone
4. Press the
key for Language.
The available languages are displayed.
Menu Outline
The following list shows the menu structure and indicates the number assigned to
each option.
1: Tools
1: Alarms
1: Wake-up Alarm
2: Once Alarm
3: Daily Alarm
4: Remove Alarm
5: Auto Power-up
1: Off
2: On
2: Camera
3: Calendar
4: To Do List
5: Voice Memo
1: Record Voice
2: Voice Memo List
3: Delete All
4: Memory Status
6: Calculator
7: Currency Converter
8: World Time
27
Menu Outline
2: Messaging
1: Text Message
1: Create New Message
2: Inbox
3: Outbox
4: Templates
5: Emoticon Templates
1: Feeling
2: Action
3: Etc
4: My Emoticons
6: Delete All
2: Multimedia Message
1: Create New Message
2: Inbox
3: Outbox
4: Drafts
5: Templates
6: Delete All
3: Browser Messages
1: Inbox
2: Settings
3: Delete All
4: Settings
1: Text Message
1: Settings 1
2: Email Settings
3: Empty
4: Common Setting
2: Multimedia Message
1: Sending Options
2: Receiving Options
3: Profiles
4: Page Duration
3: Broadcast Message*
5: Memory Status
1: Text Message
1: SIM Memory
Menu Navigation
28
2: Phone Memory
3: CB Memory*
2: Multimedia Mesage
3: Recent Calls
1: Missed Calls
2: Calls Made
3: Calls Received
4: Voice Mail
1: Connect to Voice Server
2: Voice Server Number
1: Voicemail
2: Voice Server 2
5: Delete All
6: Call Time
1: Last Call Time
2: Total Sent
3: Total Received
4: Reset Time
7: Data Volume
1: Last Sent Data
2: Last Received Data
3: Total Sent Data
4: Total Received Data
5: Reset Data Volume
8: Data Call Time
1: Recent Time
2: Total Tiime
3: Reset Data Call Time
4: MEdia Net
1: MEdia Net Home
2: Favorites
3: Enter URL
4: Browser Profiles
5: Clear Cache
5: AT&T Mall
1: Shop Tones
2: Shop Games
3: Shop Graphics
29
Menu Outline
4: Shop Multimedia
5: Shop Applications
6: MEdia Net Home
6: Games
1: Shop Games
2: Shop Applications
3: My Games
7: My Stuff
1: Ringtones/Audio
1: Shop Tones
2: Downloaded Audio
3: Default Ringtones
2: Graphics
1: Shop Graphics
2: Downloaded Graphics
3: My Photos
4: Default Wallpapers
3: Delete
4: Memory Status
1: Audio & Graphics
2: My Photos
8: Address Book
1: Contact List
2: Add New Contact
3: Group
4: Edit Group
5: Speed Dial List
6: Reject List
7: Own Number
1: Number 1 (displays handset number from SIM)
2: Number 2
3: Number 3
4: Number 4
8: Management
1: Delete All
2: Memory Status
9: Service Number*
Menu Navigation
30
9: Settings
1: Set Sound
1: Incoming Call
2: Keypad Tone
3: Message Tone
1: Text Message
2: Multimedia Message
3: Broadcast Message*
4: Folder Tone
5: Power On/Off Tone
6: Silent Mode
7: Extra Tones
2: Set Display
1: Wallpaper
1: Shop Graphics
2: Wallpaper List
2: Info Display
1: Text Display
2: Text Color
3: Graphic Logo
1: Off
2: On
4: Dialing Display
1: Rainbow
2: Monochrome
3: Basic
5: Light Settings
1: Brightness
2: Backlight Time
3: Keypad Light
3: Set Time & Date
1: Set Time
2: Set Date
3: Set Format
4: Auto Update
4: Set Phone
1: Language
31
Menu Outline
2: Shortcuts
1: Up Key
2: Down Key
3: Right Key
4: Left Key
3: Security
1: Lock Phone
2: Lock SIM Card
3: Check PIN Code
4: Lock Applications
5: Set FDN Mode
6: Change Phone Password
7: Change PIN Code
8: Change PIN2 Code
4: Greeting Message
5: Extra Settings
6: Airplane Mode
5: Network Services
1: Call Forwarding
1: Forward Always
2: Busy
3: No Reply
4: Unreachable
5: Cancel All
2: Call Barring*
1: All Outgoing Calls
2: Outgoing International Calls
3: International Calls except for Home
4: All Receiving Calls
5: Receiving Calls while Abroad
6: Cancel All
7: Change Barring Password
3: Call Waiting
1: Voice Call
2: Data Call
3: Cancel All
Menu Navigation
32
4: Network Selection*
5: Caller ID
1: Set by Network
2: Hide Number
3: Show Number
6: Reset Settings
* Shows only if supported by your SIM card.
33
Changing the Text Input Mode
Section 5: Entering Text
Topics Covered
• Changing the Text Input Mode
• Using T9 Mode
• Using Alphabet Mode
• Using Symbols
• Using Numbers
This section outlines how to select the desired text input mode when entering
characters into your phone. This section also describes how to use the T9 predictive
text entry system to reduce the amount of key strokes associated with entering text.
Changing the Text Input Mode
The Text Input option switches the key entry functions from T9 Mode, AB Mode,
Numeric Mode, and Symbols Mode.
T9 Mode
This mode allows you to enter words with only one keystroke per letter.
Each key on the keypad has more than one letter; for example, pressing
the 5 key can enter J, K, or L. However, the T9 mode automatically
compares the series of keystrokes you make with an internal linguistic
dictionary to determine the most likely word, thus requiring far fewer
keystrokes than the traditional Alphabet mode.
Ab (Alphabetic) Mode
This mode allows you to enter letters by pressing the key labeled with the
letter you want. Press the key once, twice, three, or four times until it
displays.
Numeric Mode
This mode allows you to enter numbers.
Symbols Mode
This mode allows you to enter symbols, such as punctuation marks.
Entering Text
34
When you are in a field that allows characters to be entered, you will notice the text
input mode indicator on the display.
1. To change the text input mode, press the
key. You will cycle through the
following modes:
2. Choose from the following options for the Text Mode:
: Alphanumeric mode: change between alpha modes by pressing
the
key. Modes are: Ab, AB, ab
: Numeric mode
: Symbol mode does not display an icon on the bottom in the Text
Input Mode Indicator, but displays the available symbols, and
allows you to select a symbol to enter into the text message. Press
OK to enter the symbol once selected. Press the number key
corresponding to the symbol you want to enter. Use the Up and
Down navigation keys to scroll through the available symbols.
Press the Back soft key to exit.
: T9 mode: predictive text mode
Using T9 Mode
T9 Predictive Text input mode is based on a built-in dictionary.
Enter a Word in T9 Mode
In T9 mode, begin entering a word by pressing the 2 to 9 keys. Press each
key only once for each letter. The built-in dictionary lists words that match
the keystrokes you have entered.
Example: To enter “Hello”, press
,
35
,
,
,
Using Alphabet Mode
The word that you are typing appears in the display. It may change with
each key that you press.
3. Enter the whole word before editing or deleting the keystrokes.
4. When the word displays correctly, go to step 5.
If the word doesn’t display correctly, press the
key to display
alternative word choices for the keys that you have pressed.
Example: Both “Of” and “Me” have the
choice first.
and
keys. The phone displays the most commonly used
5. Insert a space by pressing the
key and start entering the next word.
Add a New Word into the T9 Dictionary
1. After pressing the keys corresponding to the word you want to add, press
the
key to display the alternative words.
2. When the last alternative word is displayed and if your desired word has
not displayed, the left soft key becomes Add. Press the Add soft key and a
window displays where you may type in the word using the needed
alphabetic mode.
3. When the word is complete,ress the OK soft key or the
key.
The word is added to the T9 dictionary and becomes the first word for the
associated keypress series.
Note: This feature may not be available for some languages.
• To enter periods, hyphens, colons, or parenthesis, press the
key. T9 mode
applies grammar rules to ensure that correct punctuation is used.
• To shift case in T9 mode, use the
key. There are 3 cases: Initial capital, Capital
lock, and Lower case.
• You can move the cursor by using the Left and Right keys. To delete letters, press
the
key. Press and hold the
key to clear the display.
Using Alphabet Mode
To use the Alphabet Mode use the
punctionation.
to
keys to enter your text and desired
1. Press the key labeled with the letter you want:
• Once for the first letter
• Twice for the second letter
Entering Text
36
• And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or
a different letter on the same key, just wait for a few seconds for the cursor to move to the right
automatically, and then select the next letter.
Keys
•
•
•
•
•
•
•
•
•
•
Entering Symbols
Symbol mode enables you to insert symbols and punctuation marks into text.
1. To enter symbol mode press the
key.
2. To select a symbol, press the corresponding number key.
3. To display more symbols, press the Up or Down Navigation key.
4. To clear the symbol(s), press the
key. When the input field is empty,
this key returns the display to the previous mode.
5. To insert the symbol(s) into your message, press the OK soft key or the
key.
Using Numbers
Number mode enables you to enter numbers into a text message. Press the keys
corresponding to the digits you want to enter.
37
Using Contacts List
Section 6: Understanding Your Address Book
Topics Covered
• Using Contacts List
• Adding a New Contact
• Groups
• Edit Group
• Speed Dial List
• Reject List
• Finding My Own Phone Number
• Management
• Using the Service Dialing Numbers
This section allows you to manage your daily contacts by storing their name and
number in your Address Book. Address Book entries can be sorted by name, entry, or
group.
Using Contacts List
Dialing a Number from Address Book
Once you have stored phone numbers in the Address book, you can dial them easily
and quickly by using the location numbers that were assigned to them in the
Address Book.
Finding an Address Book Entry
You can store phone numbers and their corresponding names in your SIM card and
phone’s memories. They are physically separate but are used as a single entity,
called Address Book.
Depending on your particular SIM card, the maximum number of phone numbers the
SIM card can store may differ.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, and press the Select soft key or the
3. Select Contact List and press the Select soft key or the
key.
key.
Understanding Your Address Book
38
4. Enter the first few letters of the name.
The Address Book entries are listed, starting with the first entry matching
your input.
5. To select a different entry, press the Up or Down Navigation key until the
entry you want is highlighted.
6. Once you have found the entry, press the
key to dial the number, or
press the View soft key to access the Address Book entry options.
Using Address Book Entry Options
While accessing any Address Book entry, press the Options soft key to use the
options for the entry.
The following options are available:
• Edit: allows you to edit one address book entry or all entries. Press the OK soft key
to save.
• Send Message: allows you to send a text message or a multimedia message to
this contact.
• Call: allows you to call this contact.
• Copy to Phone/SIM: allows you to copy the contact information from the SIM to the
phone or from your phone to your SIM.
• Assign Speed Dial: allows you to set the speed dial key for this entry.
• Delete: allows you to delete the selected address book entry.
• Caller Group: allows you to assign the selected entry to a caller group.
• Add Entry: allows you to add a new address book entry.
Adding a New Contact
Use the following procedures to store a new contact to your Phone or SIM Card.
Storing a Number in the Phone’s Memory
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Add New Contact by pressing the Up or Down key and press the
Select soft key or the
key.
4. Select the primary number type for the contact from the icons shown.
Press the Select soft key or the
key to continue. The following icons
are represented:
• Mobile: assigns the number entered to the Mobile entry.
• Office: assigns the number entered to the Office entry.
39
Adding a New Contact
• Home: assigns the number entered to the Home entry.
• E-Mail: allows you to enter an e-mail address for the contact.
5. Select the location where the entry will be saved (SIM Card or Phone).
Press the Select soft key or the
key.
6. Select Phone and press the Select soft key or the
key.
7. Enter the information on the Enter Name screen. To change text entry
mode press the key. For further details about how to enter characters,
see "Using Alphabet Mode" on page 36.
8. Press the OK soft key or the
key to save new contact name entry.
9. Enter the additional information which can be an additional type of number
or an email address.
10. Press the OK soft key or the
key to save the additional contact entry.
11. Press the OK soft key or the
key to save completed entry. The
Address Book Store at Location xx To Phone screen displays. Press the
OK soft key or the
key to verify the save.
Note: At this point, if you have changed your mind and want to save the entry to the SIM card, you can
press the To Card (right) soft key. If your entry has an E-Mail address, however, it may only be saved
to the Phone.
The entry in the Address book displays. To add additional contact
information to this entry, press the Options soft key.
12. Use the Up or Down key to highlight Add Entry, and press the Select soft
key or the
key. Choose the additional contact information to add,
using the Left and Right navigation keys. Press the Select soft key or the
key.
13. Enter the additional contact information, then press the Save soft key or
the
key to save. Confirm the Address Book location by pressing the
OK soft key or the
key. The updated record displays.
14. To return to the Idle screen, press the
key. To access options for the
entry, press the Options soft key. The possible options for the Address
book entry are:
• Edit: allows you to edit the Address Book entry
• Send Message: allows you to send a text message to the Address book entry.
• Call: allows you to call the Address book entry, and select the number to call if
more than one are listed.
Understanding Your Address Book
40
• Copy to SIM/Copy to Phone: allows you to copy the Address Book entry to the
SIM card (only one phone number will be copied), or copy the Address Book
entry from the SIM card to the phone memory.
• Assign Speed Dial: allows you to assign the Address Book entry to a Speed Dial
number on the Speed Dial List.
• Delete: allows you to delete the Address Book entry. This will delete all
information associated with the entry.
• Caller Group: allows you to assign the Address Book entry to a Caller Group.
• Add Entry: allows you to add another phone number or email address to the
Address Book entry.
Storing a Number in the SIM Card
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Add New Contact by pressing the Up or Down key and press the
Select soft key or the
key.
4. Select the primary contact type for the contact from the icons shown.
Press the Select soft key or the
key to continue. The following icons
are represented:
• Mobile: assigns the information entered to the Mobile entry.
• Office: assigns the number entered to the Office entry.
• Home: assigns the number entered to the Home entry.
• E-Mail: allows you to enter an e-mail address for the contact.
5. Select the location where the entry will be saved: SIM Card or Phone.
Press the Select soft key or the
key.
Note: If you selected an E-Mail address, the only option available is Phone. E-Mail addresses may not be
saved on SIM cards.
6. Select SIM Card and press the Select soft key or the
key.
7. Enter the information on the Enter Name screen. To change text entry
mode press the key. For further details about how to enter characters,
see "Using Alphabet Mode" on page 36.
8. Press the OK soft key or the
key to save new contact name entry.
9. Enter the number (if you are storing on the SIM card, it must be a phone
number and not an email address).
10. Press the OK soft key or the
soft key or the
41
key to save on the SIM card. Press OK
key to verify the position on the SIM.
Adding a New Contact
Note: At this point, if you have changed your mind and want to save the entry to the phone, you can press
the To Phone (right) soft key.
The entry on the SIM card displays.
11. To add additional contact information to this entry, press the Options soft
key. Use the Up or Down key to highlight Add Entry, and press the Select
soft key or the
key. Choose the additional contact information to add,
using the Left and Right navigation keys. Press the Select soft key or the
key.
12. Enter the additional contact information, then press the OK soft key or the
key to save. The updated record displays.
13. Press OK soft key or the
key to verify the position on the SIM. To
return to the Idle screen, press the
key. To access options for the entry,
press the Options soft key. The following options display:
• Edit: allows you to edit the entered name and phone number.
• Send Message: allows you to send a text or multimedia message to the
contact.
• Call: allows you to call the entry, using the highlighted contact number.
• Copy to SIM/Copy to Phone: allows you to copy the contact to the phone.
• Assign Speed Dial: allows you to assign a speed dial number to the contact
(2-9).
• Delete: allows you to delete the contact.
• Caller Group: allows you to assign the contact to a caller group.
• Add Entry: allows you to add additional information to the contact (such as
home number, business number, and email address).
Dialing a Number from the SIM Card
When you store a contact on the SIM card, that contact will be transferred to another
phone if you use the same SIM card. On this handset, contacts stored on the SIM
may be dialed directly without assigning a speed dial number, using the following
procedure:
1. In Idle mode, enter the location number for the phone number you want to
dial and press the
key.
The contact entry information is displayed.
2. Press the Up or Down navigation key to find other numbers on the list.
3. Press the Dial soft key, the
key, or the
selected the number you want to call.
key when you have
Understanding Your Address Book
42
Groups
Groups can be used to set up distinctive ringing, or as a method to send a text or
multimedia messages to selected contacts. To be assigned to a Group, the contact
must already exist in your Address Book.
To assign a contact to a Group,
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
3. Select Contact List and press the Select soft key or the
key.
key.
4. Scroll to then highlight the contact to be added to a group by pressing the
Up or Down key, then press the View soft key or the
key.
5. Press the Options soft key.
6. Scroll to Caller Group by pressing the Up or Down key, then press the
Select soft key or the
key.
7. Select the group to which the contact is be added, then press the Select
soft key or the the
key.
8. Continue to add contacts to groups until completed. When you are finished,
press the
key to return to Idle mode.
Viewing a Group
You can view the contacts that you have assigned to a group by using the Address
Book Group option. You will not be allowed to make additions, deletions, or changes
except through the Contact List options.
Edit Group
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Edit Group by pressing the Up or Down key and press the Select
soft key or the
key.
4. Scroll through the group list by pressing the Up or Down navigation key.
5. When the group you want to edit highlights, press the Options soft key.
The following options are available:
• Voice Call Ringtone: allows you to set the ringtone associated with this
group. Choose from the Default Ringtones or from the Downloaded Ringtones.
• Message Tone: allows you to set the ringtone associated with this group when
receiving a message or multimedia message.
43
Speed Dial List
• Graphic: allows you to assign a graphic from your My Stuff folder to identify the
group.
• Group Name: allows you to change the name of the group.
6. When you are finished, press the
key to return to Idle mode.
Speed Dial List
Once you have stored contacts with their phone numbers in your Address book list,
you can set up to eight speed-dial entries and then dial them easily from Idle mode
whenever you want, simply by pressing and holding the associated numeric key.
Note: You must already have the contact set up for speed dialing.
Setting Up Speed Dial Entries
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Speed Dial List by pressing the Up or Down key, then press the
Select soft key or the
key.
4. Select the speed-dial number that you wish to assign (from the 2 to 9
keys), and press the
key.
Note: Memory location 1 is reserved for your Voice mail server number.
5. Select the contact from your Contact List that you would like to assign to
the selected Speed Dial number. If that contact has multiple numbers
listed, highlight the one to be assigned to the selected Speed Dial Number.
To save, press the Select soft key or the
key.
6. Once you have entries in the Speed Dial List, you may choose from the
following options:
• Change: allows you to change the contact assigned to this speed dial key.
• Delete: allows you to delete a speed dial entry.
• Delete All: allows you to delete all speed dial entries.
• Number: allows you to display the number assigned to this speed dial key.
7. Select the entry you would like to add and press the Select soft key or the
key to save the entry.
Changing a Number Assigned to a Key
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
Understanding Your Address Book
44
3. Scroll to Speed Dial List by pressing the Up or Down key, press the Select
soft key or the
key.
4. Highlight the Speed Dial List entry you wish to change and press Options
soft key or the
key.
5. The Change option is highlighted. Press the OK soft key or the
key.
Your Contact List displays.
6. Select the new contact to associate with this speed-dial number, and press
the View soft key or the
key. If the contact selected has more than
one contact entry (as in a home number and a cell number), highlight the
number that is to be used when Speed Dial is used.
7. Press the Select soft key or the
8. When you are finished, press the
key.
key to return to Idle mode.
Deleting Speed Dial Entries
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Speed Dial List by pressing the Up or Down Navigation key,
press the Select soft key or the
key.
4. Select the speed dial entry you wish to delete from the list by pressing the
Up or Down Navigation key to highlight. Press the Options soft key.
5. Select Delete or Delete All and press the OK soft key or the
key.
When you select Delete or Delete All, you will be asked to confirm that
you wish to delete the number (or all the numbers) except 1, your Voice
Mail Server. Press the Yes soft key or the
key to confirm the deletion.
6. When you are finished, press the
key to return to Idle mode.
Reject List
The Reject List is a group of numbers that your handset will automatically reject and
send to automated voice mail. The message the caller receives is that your number
is unavailable.
Adding a Number to the Reject List
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Reject List by pressing the Up or Down Navigation key, then
select by pressing the Select soft key or the
45
key.
Reject List
The Reject List displays. If you have no entries in your Reject List, only the
Add New option is available.
4. Select Add New, then press the Select soft key or the
key.
There are four options available under Add New:
• Number: allows you to enter a number to the Reject List.
• Contacts: allows you to add a contact from your Address Book.
• Group: allows you to add a group from your Group list.
• Recent Calls: allows you to access your Recent Calls log, and select the
number to reject from the log.
5. When you are finished, press the
key to return to Idle mode.
Editing an Entry on the Reject List
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Reject List by pressing the Up or Down Navigation key, then
select by pressing the Select soft key or the
key.
The Reject List displays.
4. Scroll to the contact on the list by pressing the Up or Down Navigation key.
5. Press the Options soft key and select the Edit function. Press the Select
soft key or the
key.
6. Make the necessary edits to the contact or number, then press the Save
soft key or the
key.
7. When you are finished, press the
key to return to Idle mode.
Deleting an Entry on the Reject List
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Reject List by pressing the Up or Down Navigation key, then
select by pressing the Select soft key or the
key.
The Reject List displays.
4. Scroll to the contact on the list by pressing the Up or Down Navigation key.
5. Press the Options soft key and select the Delete function. Three options
display: Selected, Multiple, and All.
6. To delete the selected entry only, choose the Selected option, and press
the Select soft key. You will be asked to confirm the delete. Press the Yes
soft key.
Understanding Your Address Book
46
7. To delete multiple entries, choose the Multiple option, and press the
Select soft key. Select the entries on the Reject List to delete by using the
key to put a check in the appropriate box. Press the Delete soft key or
the
key. You will be asked to confirm the delete. Press the Yes soft
key.
8. To delete all entries, choose the All option, and press the Select soft key.
You will be asked to confirm the delete. Press the Yes soft key and all
entries on the Reject List will be deleted.
9. When you are finished, press the
key to return to Idle mode.
Finding My Own Phone Number
This function is a memory aid, which you can use to check your own phone number
if you need to do so.
You can assign a name to each of your own phone numbers registered on your SIM
card. You can also edit the names and numbers. Any changes made here do not in
any way affect the actual subscriber numbers on your SIM card.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Select Own Number by pressing the Up or Down key and press the Select
soft key or the
key.
4. Highlight Number 1, and your mobile number displays in a pop up.
5. Enter additional numbers in the 2, 3, and 4 fields.
Caution!: While it is possible to edit Number 1, as it is the number assigned to the SIM it would mean that
your handset could no longer receive calls.
6. Press the
key to Save.
Management
The Management option allows you to copy, delete, and view the memory status for
the Phone and SIM entries on your phone.
Delete All of the Address Book Entries
You can delete All, Phone, SIM, and SIM (FDN) entries from your phone’s memory.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
47
key.
Using the Service Dialing Numbers
3. Scroll to Management by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Highlight Delete All and press the Select soft key or the
key.
5. Highlight the memory location you want to empty and press the
You can remove the check mark by pressing the
key.
key again.
6. Press the Delete soft key to delete the entries in the selected memory
location.
7. Enter the password and press the OK soft key or the
key.
8. At the Delete All? confirm screen, press the Yes soft key to continue, or
the No soft key to cancel.
9. When the confirmation message appears, press the Yes soft key or the
key to confirm deletion.
Press the No soft key to cancel deletion.
10. When you are finished, press the
key to return to Idle mode.
Checking the Memory Status
You can check how many names and numbers are stored in the Address book, in
both SIM card and the phone memory. You can also see the capacity of both
memories.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Management by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Select Memory Status by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
5. When you are finished viewing your phone’s Memory Status, press the
key to return to Idle mode
Using the Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN) assigned by your service
provider. These numbers include emergency numbers, customer service numbers
and directory inquiries.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
Understanding Your Address Book
48
3. Select Service Number, by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Scroll through the numbers by using the Up or Down Navigation key.
5. To dial the number displayed, press the
key.
Note: This menu is available only when your SIM card supports Service Dialing Numbers.
49
Types of Messages
Section 7: Messaging
Topics Covered
• Types of Messages
• Creating and Sending New Messages
• Settings
• Using Browser Messages
• Memory Status
This section describes how to send or receive different types of messages. It also
includes the features and functionality associated with messaging.
Types of Messages
Your phone provides the following message types:
• Text Messages
• Multimedia Messages
• Browser Messages
Creating and Sending New Messages
Text Messaging allows you to send and receive short text messages to and from
other mobile phones.
In addition, your phone supports the Multimedia Messaging, which enables you to
include simple pictures, melodies, and animated images in your messages. To use
this feature, you must subscribe to your service provider’s message service.
New messages may also be sent to email addresses. These may be plain text
messages or multimedia messages.
Text Messages
The Message icon ( ) displays when you have received new text messages. When
the memory is full, an error message displays and you cannot receive any new
messages. Use the Delete option in each message box to delete obsolete messages.
1. In Idle mode, press the Menu soft key to access Menu mode.
Messaging
50
2. Select Messaging and press the Select soft key or the
key. Using the
Up or Down Navigation key, highlight Text Message and press the Select
soft key or the
key.
3. Highlight Create New Message and press the Select soft key or the
key. Create your message.
4. When you have finished writing your message, press the Options soft key.
Choose from the following options:
• Send: allows you to send the message.
• Text Formatting: allows you to set the text size, underline, and strikethrough
for the text entered.
• Add MEdia: allows you to add pictures, animation, or melody to your message.
If you add media to your text message, it will be sent as a Multimedia Message.
- Add Picture: allows you to add a picture to your message.
- Add Animation: allows you to add an animation to your message. Select
between Preset Animation or My Animations.
- Add Melody: allows you to add a melody to your message. Select between
Preset Melodies and My Melodies.
• Templates: allows you to insert one of the preset message templates to the
text.
• Add from Favorites: allows you to add a website address from your favorite
internet addresses.
• Save Message: save the message in the Phone or SIM.
• Select Language: allows you to set the language to English, Français, or
Español.
5. Select Send and press the Select soft key or the
key. At the
Recipients screen, you may enter a destination number directly, or choose
the Options soft key to select Destination options. Options are:
• Send Message: allows you to send message. You must have a destination
entered or you will receive an error message and be returned to the message
input screen.
• Address Book: allows you to select an entry from your Address Book, and
within that entry, a specific number to send the message to.
• Group: allows you to select a Group to send the message to. Each entry listed in
the group will receive the text message.
• Delete Destination: allows you to delete the current destination from the text
message.
6. Highlight the entry and press the Select soft key. Once a recipient or
destination is entered or selected, press the Options soft key to send.
51
Creating and Sending New Messages
7. Highlight the Send Message option, and press the Select soft key or the
key to send the message.
Multimedia Messages
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Messaging and press the Select soft key or the
key.
3. Highlight Multimedia Message and press the Select soft key or the
key.
4. Using the Up or Down Navigation key, highlight Create New Message and
press the Select soft key or the
key. Enter the Subject of your
message. Press the OK soft key to save the subject text.
5. Press the Options soft key to view the following options. Each option
represents a page to your multimedia message.
• Add Text: allows you to add text to the message.
• Add Photo: allows you to add a photo from your My Photos or to take a picture
for the message.
• Add Picture: allows you to add a picture to the message.
• Add Audio: allows you to add an audio clip or to record and add an audio clip to
your message.
• Send: allows you to send the message.
• Save: saves the message to Drafts folder.
• Settings: allows you to select:
- Delivery Report
- Expire Date
- Delivery Time
- Priority
• Preview: allows you to preview the message before sending.
6. Using the Up or Down Navigation key, highlight each option that you want
to use and press the Select soft key or the
key. Press the Options
key, and the remaining options display.
Note: As you select and enter media pages from options on the Options list, that option will no longer be
available during the creation of the message. Each subsequent Options list will show the used media
options as unavailable.
7. When all media pages have been added, the options listed for the message
are:
• Add Page: allows you to add additional pages to the message.
• Delete: allows you to delete the message.
Messaging
52
•
•
•
•
Duration: lets you know the duration of the message.
Send: allows you to send the message.
Save: allows you to save the message to the Drafts folder.
Settings: allows you allows you to select:
- Delivery Report
- Expire Date
- Delivery Time
- Priority
• Preview: allows you to preview the message before sending.
8. When you have finished creating the message, press the Options soft key
and highlight the Send menu option.
9. The Send screen displays, press the Options soft key. Type in the recipient
number, or choose recipient as entries from your Address Book, a Group in
your Address Book, or an email address.
10. When you have finished entering destination entries, press the Send key.
Retrieving New Text Messages
While text messages from other phones are delivered directly to your phone,
Multimedia messages will be stored in the Inbox of the message server and the
server will alert you to new messages. Therefore you need to retrieve new messages
to your phone and read them on the phone.
Retrieving a Multimedia Message
When a new Multimedia message comes in, the display shows the Multimedia
Message icon ( ) and a text notification along with the sender’s number.
1. Press the View soft key to view brief information about the message, such
as the sender’s number, the message size, and the subject.
If you want to view the message later in the Inbox, press the Back soft key.
2. To view the message, press the Select soft key or the
key. The
message is retrieved and displayed.
3. Press the Options soft key or the
•
•
•
•
•
•
53
key to access the following options:
Delete: allows you to delete the message.
Reply: allows you to reply to the message.
Reply All: allows you to reply to all the recipients of the message.
Call Back: allows you to call the sender of the message.
Extract Address: allows you to move the address to the contacts list.
Forward: allows you to forward the message to another person.
Creating and Sending New Messages
• Save Picture: saves the picture to the My Stuff folder.
• Save Sound: saves the audio clipto audio folder.
• Properties: shows you detailed information about the message.
4. To scroll through the message, press the Up or Down key.
5. When you have finished, press the
key.
Viewing a Message
1. In Idle mode, press the Menu soft key and highlight Messaging. Press the
Select soft key or the
key.
2. Highlight the either the Text Message or the Multimedia Message folder
and press the Select soft key or the
key.
3. Highlight Inbox and press the Select soft key. The message list opens.
4. Select a message on the list. The message content displays.
5. Press the Up or Down key to scroll through the message screen. For an
Multimedia message, press the Left or Right key to scroll to other pages, if
the message has more than one page.
6. When you have finished, press the
key.
Using Message Options
While viewing the content of a message, press the Options soft key to access the
following options:
Options for Text Messages
• Reply: allows you to reply to the message via Text message.
• Call Back: allows you to dial the originating message number.
• Forward: allows you to forward the message.
• Delete: deletes the message.
• Move to Phone/Move to SIM: If a message is stored in the SIM card, it is saved to
the phone’s memory. If a message is stored in the phone’s memory it is saved to
the SIM card.
• Extract Address: allows you to save the recipient or sender’s number and URL,
Email addresses or phone numbers from the message text.
• Save Media: allows you to save sent media to your My Stuff folder.
Options for Multimedia Messages
• Delete: allows you to delete the message.
• Reply: allows you to reply to the message.
• Reply All: allows you to reply to all the recipients of the message.
Messaging
54
• Call Back: allows you to call the sender of the message.
• Extract Address: allows you to move the address to the contacts list.
• Forward: allows you to forward the message to another person.
• Save Picture: saves a photo to the Graphics folder.
• Save Sound: saves an audio file to the Ringtones/Audio folder.
• Properties: shows you detailed information about the message.
Using Message Templates
Your phone has message templates to allow you to retrieve them when creating a
message. You can change the templates as your preferences or send a message
immediately.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Messaging, then select either Text Message or Multimedia
Message mode, and press the Select soft key or the
key.
3. Highlight Templates and press the Select soft key or the
key.
4. Highlight a template and press the Options soft key to access the following
options:
• Edit: allows you to change the template.
• Send Message: allows you to send an SMS and MMS message using the
template.
• Delete: deletes the template.
• Add New: allows you to add a new template message.
5. When you have finished, press the
key.
Deleting Messages
You can delete the messages in each message folder(s) individually or all at one
time. You can also delete all of your messages at one time.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Messaging and press the Select soft key or the
key.
3. Highlight either Text Message or Multimedia Message and press the
Select soft key.
4. Using the Up or Down Navigation key highlight Delete All and press the
Select soft key or the
key.
5. Select the message folder(s) you want to empty. Use the Navigation keys to
highlight the folder and press the
delete.
55
key to mark the folder you want to
Settings
To delete all of the messages in all folders, select All Messages.
6. Press the Delete soft key. At the “Delete All?” pop-up, press the
key
to mark files with protection to be deleted or press the Yes soft key to
delete.
7. Press the Yes soft key or the
key to confirm deletion.
8. When you have finished, press the
key.
Settings
You can set up various options for using messaging services.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Messaging and highlight Settings. Press the Select soft key or the
key.
3. Select the type of message for which you want to edit the settings. Press
the Select soft key or the
key.
Text Message
The following Setting options are available:
• Settings 1
• Service Centre
• Default Destination
• Default Type
• Default Validity
• Setting Name
• Email Settings
• Service Centre
• Default Destination
• Default Type
• Default Validity
• Setting Name
• Empty: allows you to set up a custom Setting.
• Service Centre
• Default Destination
• Default Type
• Default Validity
• Setting Name
• Common Setting
• Reply Path
Messaging
56
• Delivery Reports: turn On/Off delivery reports.
Multimedia Message
The following Setting options are available:
• Sending Options: allows you to set the following sending options:
• Delivery Report: when this option is enabled, the network informs you whether or
not your message has been delivered.
• Expire Date: allows you to set the amount of time before the message expires.
• Delivery Time: you can set a time for when the phone sends your messages:
Immediately, 6 Hours later, 12 Hours later, 1 Day Later, 1 Week Later.
• Priority: you can select the priority level of your messages.
• Receiving Options: allows you to set the following receiving options:
• Auto Download: multimedia files are automatically downloaded to your handset.
• Message Acceptance: allows you to set whether you get all Multimedia
Messages, or Information, Advertisement, or Anonymous messages.
• Report Allowed: allows messages with a report.
• Profiles: you can select a connection profile to be used for sending and receiving
Multimedia messages. Choose between the three options of MEdia Net, AT&T
MMS, and AT&T JAVA. You can Activate, Edit, or Add New Connection profile.
• Page Duration: set the number of seconds a page displays.
Using Browser Messages
The Browser Messages function allows you receive browser messages that are sent
from a browser location, most commonly broadcast messages from your provider.
Broadcast Message*
The following options are available:
• Read: allows you to read the first Broad Message displayed. Use the Navigation
key to scroll through the messages.
• Receive: allows you to enable or disable the reception of broadcast messages.
• Channel List: allows you to indicate the channels from which you wish to receive
broadcast messages. The following options are available:
• Select: use to save the channel for future use.
• Add Channel: use to enter the ID and title for a new channel.
• Delete: use to remove a channel from the list.
• Edit: use to change the ID and title of an existing channel.
• Language: allows you to select your preferred language in which to display cell
broadcast messages.
57
Memory Status
Please contact your service provider for further details.
Memory Status
You can check the amount of the memory being used and the memory remaining for
multimedia messages.
The display shows the total space including the used and free space. You can also
view how much space is currently occupied by each message box.
Messaging
58
Section 8: Changing Your Settings
Topics Covered
• Set Sound
• Set Display
• Set Time & Date
• Set Phone
• Network Services
• Reset Settings
This section explains the sound and phone settings for your phone. It includes
display settings, security settings, and extra settings associated with your phone.
Set Sound
You can customize various sound settings.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Select Set Sound and press the Select soft key or the
key. The
following options are available. Use the Down Navigation key to scroll to
and set options:
Incoming Call
This menu allows you to make a selection from the following categories:
• Shop Tones: allows you to access the internet to shop for a new ringtone.
• Alert Type : allows you to set the alert default. Choose from Melody, Vibration, or
Vibration Then Melody.
• Ringtone: allows you to select from the preloaded ringtones.
• Ringtone Volume: allows you to set the volume for your ringer to sound when
receiving an incoming call.
Press the Up or Down Navigation key to make selection. Press the Select soft key or
the
key to save changes.
59
Set Sound
Keypad Tone
This menu allows you to select the tone and volume when you press the keypad.
1. Highlight Tone to select from Off, Xylophone, Simple, Tone, or Beep.
2. Highlight Volume, and use the Up or Down Navigation key to increase or
decrease the volume.
Message Tone
This menu allows you to select how the phone informs you that a new Text Message,
Multimedia Message, or Broadcast Message has been received.
For each message tone, the following options are available:
• Off, Vibration, Tone1 ~ Tone4: you can select a message tone.
Press the Up or Down Navigation key to make selection. Press the OK soft key or the
key to save changes.
Folder Tone
This menu allows you to set the tone played when you open and close your phone.
Choose from Off (no sound is played when you open or close your phone), Future, or
Crystal.
Power On/Off Tone
This menu allows you to enable/disable the melody that the phone sounds when it is
switched on and off.
Press the Up or Down Navigation key to make selection. Press the Select soft key or
the
key to save changes.
To turn off the sound, select Off.
Silent Mode
This menu item allows you to select what mode your phone will go in when you
press and hold the
key. You can choose Vibration or Mute.
When Vibration is selected your phone will only vibrate.
When Mute is selected your phone will not make a sound or vibrate.
Press the Up or Down Navigation key to make selection.
Press the Select soft key or the
key to save changes.
Changing Your Settings
60
Extra Tones
You can customize additional tones for the phone.
1. To turn a given tone on, press the
key. A check mark displays in front
of the option.
2. To turn a given tone off, press the
key. The check mark no longer
displays in front of the option.
The following options are available:
• Error Tone: sets whether or not the phone beeps when you have entered an
incorrect key.
• Minute Minder: sets whether or not the phone beeps every minute during a call to
keep you informed of the length of your call.
• Connect Tone: sets whether or not the phone to beep when your call is connected
to the system.
• Alert on Call: This menu allows you to choose whether or not the phone informs
you when you receive a new message or when the time for an alarm comes during
a call.
Set Display
In this menu, you can change various settings for the display or backlight.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Select Set Display and press the Select soft key or the
key.
The following options are available. Use the Down Navigation key to scroll
to and set options:
Wallpaper
The wallpaper menu allows you to select from a list of Shop Graphics or Wallpaper
List.
Info Display
Allows yot to set the text display and text color.
1. Highlight Info Display and press the Select soft key or the
key.
2. Choose from Text Display or Text Color and press the Select soft key or
the
61
key.
Set Time & Date
Graphic Logo
You can select the On or Off for the Graphic Logo. Press the Select soft key or the
key to save selection.
Dialing Display
In this menu, you can select the dialing font color. Choose Rainbow, Monochrome,
or Basic. Press the Select soft key or the
key to save selection.
Light Settings
You can adjust the display Brightness, Backlight Time, or Keypad Light to see the
Main LCD better in different lighting conditions.
Brightness
Press the Left or Right Navigation key or press the Volume keys to adjust the
brightness. Press the OK soft key or the
key to save selection.
Backlight Time
In this menu, you can select the length of time for the Main LCD backlight and the
Main LCD Dim.
• On: Settings available are: 15 seconds, 30 seconds, 1 minute, 3 minutes, and 10
key to save selection.
minutes. Press the Select soft key or the
• Dim: Settings available are: 15 seconds, 30 seconds, 1 minute, 3 minutes, and Off.
key to save selection.
Press the Select soft key or the
Keypad Light
Use this option to set the keypad lighting. Select from the following options Use at
Any Time, Use at Night Time, and Use at Custom Time. If Use at Custom Time is
selected, the option Set Time is activated, and allows you to enter a specific time
when the Keypad Light will be activated.
Set Time & Date
This menu allows you to change the current time and date displayed. You can also
find out what time it is in another part of the world.
Note: Before setting the time, you must specify your time zone in the World time menu. For more
information, see "World Time" on page 81.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
Changing Your Settings
62
3. Select Set Time & Date and press the Select soft key or the
key.
The following options are available. Use the Down Navigation key to scroll
to and set options:
• Set Time: allows you to enter the current time using your keypad. Press the OK
soft key to save. Use the Up or Down Navigation key to select AM or PM. Press
the Select soft key or the
key to save selection.
• Set Date: allows you to enter the current date using your keypad. Press the OK
soft key to save.
• Set Format: allows you to change the time format to 12 hours or 24 hours,
and the date format between the three most common date formats used
internationally. Use the Up or Down Navigation key to select which format.
Press the Select soft key to save.
• Auto Update: allows you to receive time information from your service
provider’s network. Use the Up or Down Navigation key to set Auto UpDate.
- Off: you need to manually set the time and date according to the current time
zone using the Set time menu.
- On: the phone automatically updates the time and date according to the current
time zone using the network service.
- Confirm First: the phone asks for a confirmation before the update.
4. Press the Select soft key or the
to save your Time & Date settings.
Note: Automatic updates of time and date does not change the time you have set for alarm settings or
calendar memos.
Set Phone
To customize the settings of your phone use the following steps:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Using the Up or Down Navigation key highlight the phone setting you
would like to edit, and press the Select soft key or the
following options are available:
key. The
Language
You can select a display language. You can set the Text Language. The options are:
• Automatic: allows the language to be automatically selected according to the
language of the SIM card used.
• English
• French
• Spanish
63
Set Phone
䊳
Press the Select soft key or the
key to save selection.
Shortcuts
This menu displays what short cut options are associated with the Navigation keys.
Press the Select soft key to change the Shortcuts option assignment.
Security
The Security feature enables you to restrict the use of your phone by others and to
restrict the types of calls.
Various codes and passwords are used to protect the features of your phone.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Settings and press the Select soft key or the
key.
3. Highlight Security and press the Select soft key or the
key.
The following options are available. Use the Up or Down navigation key to
scroll to and set options:
Lock Phone
When the Phone Lock feature is enabled, the phone is locked and you must enter
the 4- to 8-digit phone password each time the phone is switched on.
The following options are available:
• Off: you are not asked to enter the phone password when you switch on the phone.
• On: you are required to enter the phone password when you switch on the phone.
Lock SIM Card
When the SIM Lock Card feature is enabled, your phone only works with the current
SIM. You must enter the SIM lock code to unlock the SIM so you can use a different
SIM card.
Once you have entered the lock code, you are asked to confirm your password.
Reenter your password and press the OK soft key.
The following options are available:
• Off: you are not asked to enter the phone password when you switch on the phone.
• On: you are required to enter the phone password when you switch on the phone.
Check PIN Code
When the Check PIN Code feature is enabled, you must enter your PIN each time
you switch on the phone. Consequently, any person who does not have your PIN
cannot use your phone without your approval.
Changing Your Settings
64
Note: Before disabling the Check PIN Code feature, you must enter your PIN.
The following options are available:
• Off: the phone connects directly to the network when you switch it on.
• On: you must enter the PIN each time the phone is switched on.
Lock Applications
Using the Lock Applications menu, you can lock the following categories:
• All
• Messaging
• Recent Calls
• Ringtones/Audio
• Graphics
• Address Book
1. Select the applications you want to lock by using the Navigation keys to
highlight the application and press the
key to mark your selection.
2. Press the OK soft key to lock selected application. Enter your Password
and press the OK soft key.
3. To access these locked applications, you must first enter the phone’s
password to access the associated menus.
Set FDN Mode
Set FDN (Fixed Dialing Number) Mode, if supported by your SIM card, restricts your
outgoing calls to a limited set of phone numbers. When this feature is enabled, you
can make calls only to phone numbers stored in the FDN list on the SIM card.
The following options are available:
• Off: you can call any number.
• On: you can only call the phone numbers stored in the SIM FDN list.
You must first enter your PIN2 password.
Note: If the PIN2 password is required, you can request it from your service provider.
Change Phone Password
The Change Phone Password feature allows you to change your current phone
password to a new one. You must enter the current password before you can specify
a new one. Once you have entered a new password, you are asked to confirm it by
entering it again.
65
Set Phone
Change PIN Code
The Change PIN Code option allows you to change your current PIN, provided that
the Change PIN Code feature is enabled. You must enter the current PIN before you
can specify a new one.
Once you have entered a new PIN, you are asked to confirm it by entering it again.
Note: If the PIN password is required, you can request it from your service provider.
Change PIN2 Code
The Change PIN2 Code feature allows you to change your current PIN2 to a new
one. You must enter the current PIN2 before you can specify a new one. Once you
have entered a new PIN2, you are asked to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.
Greeting Message
This menu allows you to set a greeting to be displayed briefly when the phone is
switched on.
For details about entering characters, see "Entering Text" on page 34.
Extra Settings
You can turn the automatic redialing or answering features on or off.
1. To turn a feature on, press the
key. A check mark displays in front of
the option.
2. To turn a feature off, press the
key. The check mark no longer
displays.
The following options are available:
Note: The interval between call attempts varies.
• Auto Redial: when this option is checked, the phone makes up to ten attempts to
redial a phone number after an unsuccessful call.
• Anykey Answer: when this option is checked, you can answer an incoming call by
pressing any key, except the
key or the Reject soft key. To reject the call, press
the
key or the Reject soft key. When this option is unchecked, you must press
the
key or Accept soft key to answer a call.
Changing Your Settings
66
• Open to Answer: when this option is checked, you can simply open the phone to
answer a call. When it is unchecked, you must open the phone and press a key to
answer a call, depending on the setting of the Anykey Answer option.
Airplane Mode
The Airplane Mode option allows you to use many of your phone’s features during a
flight. Use the Up or Down Navigation keys to select Off or On. Press the Select soft
key to make your selection. The radio that interconnects with the service provider’s
network is disabled, to avoid interference with the airplane’s equipment.
Applications and games are still available.
Network Services
The Network Service Settings allows you to manage the settings associated with
your calls.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Select Network Services and press the Select soft key or the
key.
The following options are available. Use the Down Navigation key to scroll
to and set options:
Call Forwarding
This network service enables incoming calls to be rerouted to the number that you
specify.
Example: You may wish to forward your business calls to a colleague while you are on holiday.
To set your call forwarding options:
1. From the Network Services menu, select Call Forwarding.
2. Select a call forwarding option by pressing the Up or Down key and then
press the Select soft key or the
key.
The following options are available:
• Forward Always: allows you to forward Voice Calls and Data Calls. Press the Select
soft key and press the Activate and enter the forwarding number. To deactivate,
follow the same steps and press the Deactivate soft key.
• Busy: allows you to forward Voice Calls and Data Calls to the designated number
instead of your voice mail number if you are on another phone call.
67
Network Services
• No Reply: allows you to forward Voice Calls and Data Calls to the designated
number instead of your voicemail number when there is no answer on your phone.
You can choose the time setting from 5, 10, 15, 20, 25, and 30 seconds).
• Unreachable: calls are forwarded when you are not in an area covered by your
service provider or when your phone is switched off.
• Cancel All: all call forwarding options are canceled.
3. Select the call type, Voice Calls or Data Calls, by pressing the Up or
Down key, and then press the Select soft key or the
key.
4. Using the Left or Right Navigation key select Activate.
Select Deactivate to turn off call forwarding.
5. Scroll to Divert To, enter or change the number to be called.
To enter an international code, press the 0 key until the + sign displays.
6.
Press the Select soft key to save changes.
Call Barring (SIM Dependent)
The call barring network service allows you to restrict your calls. This option is SIM
dependent and requires a subscription. For more information, contact your service
provider.
Call Waiting
This network service informs you when someone is trying to reach you during
another call.
You can specify individual call waiting options for voice calls and/or data calls.
To set your call waiting options:
1. From the Network Services menu screen, select Call Waiting.
2. Select the call type, Voice Call or Data Call, to which the call waiting
option is to be applied. Press the Up or Down Navigation key and then
press the Select soft key or the
key.
Note: Data Call service is only available through a properly provisioned SIM card.
The screen informs you whether call waiting is activated or deactivated.
Select Cancel All to cancel all call waiting features.
3. Using the Up or Down Navigation key you can Activate or Deactivate the
call waiting feature respectively.
4. Press the Select soft key to apply selection.
Changing Your Settings
68
Network Selection (SIM Dependent)
The Network Selection feature enables you to automatically or manually select the
network used when roaming outside of your home area.
Note: You can select a network other than your home network only if there is a valid roaming agreement
between the two.
To indicate to automatically or manually select the network to be used when
roaming:
1. From the Network Services menu screen, select Network Selection.
2. Press the Up or Down key until the appropriate option highlights, then
press the OK soft key or the
key.
If you select Automatic, you are connected to the first available network
when roaming.
If you select Manual, go to step 3.
3. Press the Up or Down key until the network you want highlights and then
press the OK soft key or the
key.
The phone will scan for that network and you will be connected.
Caller ID
You can prevent your phone number from being displayed on the phone of the
person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Set by Network: the default setting provided by the network is used.
• Hide Number: your number does not display on the other person’s phone.
• Show Number: your number is sent each time you make a call.
Press the Select soft key to apply changes.
Reset Settings
You can easily reset your phone to its default settings. To reset your phone:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and highlight Reset Settings. Press the Select soft key or
the
69
key.
Reset Settings
3. In some cases, you will be prompted to enter your password. Enter and
press the OK soft key.
All settings are reset to default settings.
Changing Your Settings
70
Section 9: AT&T Mall
Topics Covered
• Shop Tones
• Shop Games
• Shop Graphics
• Shop Multimedia Content
• Shop Applications
• Accessing the MEdia Net Home
The AT&T Mall topics covered in this section are shopping for Tones, Games,
Graphics, Multimedia, and Accessing the MEdia Home site.
Shop Tones
The Shop Tones menu option allows you to shop for audio tones using the built-in
browser. You can download and save audio to your Ringtones/Audio folder.
To access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Tones menu option to launch the built-in browser and
select a file to download. Follow the on-screen options. The downloaded
files can be stored into either the Ringtones/Audio folder found within
your My Stuff location.
4. Select an audio file and press the
key.
5. When you are ready to purchase the audio file, press the Buy Now button
and complete the transaction.
Shop Games
The Shop Games menu option allows you to shop for games using the built-in
browser. You can download new games to your My Games folder. To access this
menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
71
key.
Shop Graphics
3. Highlight the Shop Games menu option to launch the built-in browser and
select a game to download. Follow the on-screen options. The downloaded
files can be stored in the My Games folder found within the Games
location.
4. Select a game entry and press the
key.
5. When you are ready to purchase the game, press the Buy Now button
complete the transaction.
Shop Graphics
The Shop Graphics menu option allows you to shop for graphic images using the
built-in browser. You can download new images to your Graphics folder. To access
this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Graphics menu option to launch the built-in browser
and select an image to download. Follow the on-screen options. The
downloaded files can be stored in the Graphics folder found within the My
Stuff location. These images can be used as wallpapers or included into
multimedia messages.
4. Select an image entry and press the
key.
5. When you are ready to purchase the image, press the Buy Now button to
charge your e-wallet account and complete the transaction.
Shop Multimedia Content
The Shop Multimedia menu option allows you to shop for multimedia files (videos)
using the built-in browser. To access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Multimedia menu option to launch the built-in browser
and select a video file to download. Follow the on-screen options. The
downloaded files can be stored in the My Stuff location. These files can be
included into multimedia messages or sent as attachment files to text
messages.
4. Select an video file entry and press the
key.
5. When you are ready to purchase the file, press the Buy Now button
complete the transaction.
AT&T Mall
72
Note: Video may not be supported by your SIM card or by your service provider for this phone. Contact your
service provider Customer Support for further information.
Shop Applications
The Shop Applications menu option allows you to shop for application files using
the built-in browser. You can download the new applications to your My Games
folder. To access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Applications menu option to launch the built-in
browser and select an application to download. Follow the on-screen
options. The downloaded applications will be stored in the My Games
folder.
4. Select an application file entry and press the
key.
5. When you are ready to purchase the application, press the Buy Now button
to complete the transaction.
Accessing the MEdia Net Home
The MEdia Net menu option allows you to quickly access your MEdia Net homepage
using the built-in browser. This page gives you quick access to information such as
local weather, sports scores, horoscope information and quick links to the previously
mentioned shopping sites. To access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the MEdia Net Home menu option to launch the built-in browser
and launch this AT&T homepage.
73
Alarms
Section 10: Tools
Topics Covered
• Alarms
• Camera
• Calendar
• Voice Memo
• Calculator
• Currency Converter
• World Time
The topics covered in this section are Alarms, Camera, Calendar, To Do List, Voice
Memo, and Calculator.
Alarms
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring the alarm even if the phone is
switched off.
To set the alarm:
1. In Idle mode, press the Menu soft key to access the menu mode.
2. Select Tools and press the Select soft key or the
key.
3. Highlight Alarms and press the Select soft key or the
key. The
following options display:
• Wake-up Alarm: the alarm rings to wake you up at the specified time.
• Once Alarm: a one-time alarm.
• Daily Alarm: an alarm for a daily occurence.
• Remove Alarm: removes an alarm.
• Auto Power-up: the alarm rings even when the phone is turned off.
• Select an alarm type and press the Options soft key. Use the
alphanumeric keypad enter a time for the alarm to sound.
Tools
74
Note: Your phone is preset to a 12-hour format. To change the time format, see "Set Time & Date" on page
62.
4. Set the following options:
• Remove Alarm: use this option to remove any alarm settings you have made.
• Alarm Tone: press the Select soft key or the
key to select a tone.
5. Press the Select soft key to save changes.
Note: To stop the alarm when it rings, open the phone and press any key.
Setting Auto Power Alarms
You can set the phone to ring the alarm when the time for an alarm comes, if the
phone is switched off.
1. In Idle mode, press the Menu soft key to access menu mode.
2. Select Tools and press the Select soft key or the
key.
3. Highlight Alarms and press the Select soft key or the
key.
4. Select Auto Power-up and press the Select soft key.
5. Using the Up or Down Navigation key, highlight On and press the Select
soft key or the
key to activate the Autopower feature.
If the menu option is set to Off, and the phone is switched off at the
specified time, the alarm does not ring.
6. When you have finished, press the
key.
Camera
Taking Photos
Note: When taking a photo in direct sunlight or in bright conditions, shadows may appear on the photo.
1. In Idle mode, press the
Options soft key and select the Camera
option, or press and hold the Camera key
on the right side of the
handset.
Alternatively, in Idle mode, press the Menu soft key and use the
Navigation keys to highlight Tools. Press the Select soft key or the
key. Use the Up or Down Navigation key to highlight Camera and press
the Select soft key or the
key.
2. Adjust the image by aiming the camera at the subject.
3. Press the
75
key to take the photo.
Camera
Note: Your camera produces photos in JPEG format.
4. Or before taking the photo, press the
soft key to access camera
options.
Camera Options
• Effects: allows you to choose a custom color tone for your photo. Choose from the
following Effects Mode.
• No Effects: automatically adjust the picture for the best quality available.
• Black & White: removes all color and display the picture as black and white.
• Negative: changes the image to a negative image display.
• Sepia: adds a greyish look to the photo.
• Antique: changes photo to add an orangish tint.
• Moonlight: changes the image to appear bluish grey.
• Frame: adds a selected frame to the photo.
• Shooting Mode: allows you to take a photo in various modes. Once you change
the mode, the corresponding indicator appears at the top right of the display.
• Normal Shot: allows you to take a single photo and view it. Press the Options
soft key to view the following options:
- Send: allows you to send the photo in an MMS message.
- Set as Wallpaper: allows you to set the photo as your wallpaper.
- Delete: allows you to delete the photo you have taken.
- Rename: allows you to rename the photo.
- Lock: allows you to lock the photo to prevent deletion.
- Properties: allows you to view the properties for this photo.
• Multi-Shot: allows you to take 6, 9, or 15 shots automatically. Once you press
the Camera key on the right side of the handset or the
key, the camera
will take the shots sequentially (at either Normal speed or High speed).
You then can look at the shots taken, and use the Navigation keys to
select which shots to Save, or Save All. Press the Clear key to delete all.
• Mosaic Shot: allows you to take multiple shots that will be arranged together
into a single frame. You may select either 2X2 or 3X3 arrangement of shots. If
you choose the Automatic mode for either 2X2 or 3X3, once you press the
key or the Camera key on the right of the handset, the pictures are taken
with only a slight delay between the shots; if you choose the Manual mode, you
control the taking of the shots. An icon on the display shows how many shots of
the mosaic have been taken. When all pictures for the mosaic are shot, the
composite shot displays. You may Save or Cancel the composite shot.
Tools
76
• Timer: allows you to set a time delay before the camera takes the photo.
• Off
• 3 Seconds
• 5 Seconds
• 10 Seconds
• Camera Settings: allows you to customize your camera settings. Choose the
following options:
• Size: allows you to set the image size. The icon for the selected image size
appears on the capture screen.
• Quality: allows you to select the picture quality setting. Choose from Super
Fine, Fine, or Normal.
• Scene Program: allows you to set the lighting for the photos. Choose Normal
or Night Time.
Note: Various options of the Camera Settings may result in a photo file size greater than the 50K limit that
is allowed by Mutimedia Messaging Service. The default settings of the camera will allow a photo
that can be sent via MMS.
• Help: allows you to see the shortcut keys associated when using the camera.
5. Press the Back soft key to return to the picture viewer.
6. You can use the keypad to quickly change the camera options using the
camera shortcut keys.
Camera Shortcuts
Shortcut keys, allows you to change options using your keypad, Navigation keys,
and Volume key in capture mode. The following options are available.
takes photo.
zooms in or out.
adjust the image brightness.
zooms in.
zooms out.
changes the image size.
77
Calendar
changes the image quality.
changes the camera shooting mode.
changes the camera effects.
adds frames to the picture being taken.
sets a time delay (Off, 3, 5, or 10 seconds).
switches to the Photo Album.
switches from full screen to standard screen
viewfinder.
Camera Options after a Photo is Taken
After you have taken a photo, you can use various options by pressing the Options
soft key. Highlight an option and press the Select soft key or the
key. The
following options are available:
• Send: allows you to send the photo in an MMS message.
• Set as Wallpaper: allows you to set the photo as your wallpaper.
• Delete: allows you to delete the photo you have taken.
• Rename: allows you to rename the photo.
• Lock: allows you to lock the photo to prevent deletion.
• Properties: allows you to view the properties for this photo.
Accessing the Photos Folder
1. In Idle mode, press the Menu
soft key to access Menu mode.
2. Use the Navigation keys to highlight My Stuff and press the Select soft
key or the
key.
3. Highlight Graphics and press the Select soft key or the
key.
4. Use the Up or Down Navigation key to select the My Photos folder press
the Select soft key or the
key.
Calendar
The calendar feature allows you to view the Month, Week, and Day layout views. It
also shows any Missed Alarm Events that have occurred. To access the Calender
menu, use the following steps:
Tools
78
1. In Idle mode, press the Menu soft key to access menu mode.
2. Select Tools and press the Select soft key or the
key.
3. Highlight Calendar and press the Select soft key or the
key.
4. Press the Options soft key. Highlight the entry and press the Select soft
key or the
Exit.
key. Entries are Search All, Delete All, Go to Date, and
5. When you have finished, select the Exit option or press the
key.
To Do List
The To Do List allows you to create a list, then set Priority and Date. Once the entry
has been created, you may perform the following:
• New: create another To Do List.
• Mark: indicate whether the activity has been Done or Not Done.
• Edit: allows you to edit the To Do List.
• Sort: allows you to sort the activities by priority and by whether they are done or
not done.
• Copy: allows you to copy the To Do List to another date.
• Copy to Calendar: allows you to copy the To Do List to the Calendar, and set an
Alarm.
• Delete: allows you to delete the selected To Do List.
• Delete All: allows you to delete all To Do Lists.
• Exit: allows you to exit from the To Do List function.
Voice Memo
This menu allows you to record a Voice Memo, shows a list of saved voice memos,
allows you to delete all voice memos, and check the memory status. When a voice
memo is recorded and saved, it is stored in the Voice Memo List folder.
To access this menu use the following steps:
1. In Idle mode, press the Menu soft key to access menu mode.
2. Select Tools and press the Select soft key or the
key.
3. Highlight Voice Memo and press the Select soft key or the
key.
4. With Record Voice highlighted, press the Select soft key. To start
recording, press the Record soft key. Record a memo by speaking into the
microphone.
79
Calculator
5. Press the Stop soft key or the
key to stop the recording. When the
recording is complete, the following options are available:
• Replay
• Re-Record
• Save
• Quit
6. When you are ready to save, highlight the Save option and press the
Select soft key.
7. Enter the name of the Voice Memo, or use the system default name, then
press OK soft key.
8. Once you have an available Voice Memo, press the Options soft key to
display the following options:
• Send: allows you to send your memo to other people by using MMS.
• Rename: allows you to change the memo’s name.
• Delete: allows you to delete the memo.
9. To exit, press the Back soft key or the
key.
10. In Idle mode, press the Menu soft key and select Tools.
11. Highlight Voice Memo and press the Select soft key or the
key.
12. Highlight Voice Memo List and press the Select soft key or the
key.
13. A list of voice memos displays. To play a recording, use the Up or Down
Navigation key to highlight a recorded memo, and press the Options soft
key.
14. To exit, press the Back soft key or the
key.
Calculator
With this feature, you can use the phone as a calculator. The calculator provides the
basic arithmetic functions; addition, subtraction, multiplication, and division.
1. Highlight Calculator and press the Select soft key or the
key.
2. Enter the first number using the numeric keys.
Note: To include a decimal point or a bracket, press the left soft key until the symbol you want displays.
3. Enter the operation for your calculation by pressing the Navigation keys,
according to the illustration on the display.
4. Enter the second number.
5. To view the result, press the
key.
Tools
80
Currency Converter
The Currency Converter provides for converting U.S. dollars using a Foreign
Exchange Rate calculator.
World Time
The World Time tool allows you to determine how many time zones difference from
your time zone a location is offset. You can also apply Daylight Savings Time to your
own time zone.
1. Highlight World Time and press the Select soft key or the
key.
2. Use the Left or Right Navigation keys to browse cities and time zones.
3. Press the Options soft key to select the Save option, or press the
key
to set the city or area as the new time zone. The displayed time will shift to
reflect the time zone selected.
81
Ringtones/Audio
Section 11: My Stuff Folder
Topics Covered
• Ringtones/Audio
• Graphics
• Delete
• Memory Status
The topics covered in this section are ringtones/audio, graphics, deleting
downloaded ringtones/audio or graphics, deleting photos, and memory status.
Ringtones/Audio
The Audio menu option allows you to Shop Tones using the WAP browser. You can
download and save to your Downloaded Ringtones folder. To access the Audio menu
option, use the following steps:
1. In Idle mode, press the Menu
soft key to access Menu mode.
2. Use the Navigation keys to highlight My Stuff and press the Select soft
key or the
key or the
key. Ringtones/Audio is highlighted, press the Select soft
key.
3. Highlight the Shop Tones menu option to launch the WAP browser and
select a file to download. Follow the on-screen options. The files
downloaded will be stored in the Downloaded Audio folder.
4. Highlight Default Ringtones to select from the pre-loaded ringtones on
your phone. Press the Select soft key to save the setting.
Graphics
The Graphics menu option allows you to shop graphics using the WAP browser. You
can download new, and save to your Downloaded Graphics folder. To access the
Graphics menu option, use the following steps:
1. In Idle mode, press the Menu
soft key to access Menu mode.
2. Use the Navigation keys to highlight My Stuff and press the Select soft
key or the
key.
3. Highlight Graphics and press the Select soft key or the
key.
My Stuff Folder
82
4. Highlight Shop Graphics menu option and press the Select soft key or the
key to launch the WAP browser and select a file to download. Follow
the on-screen options. The files downloaded will be stored in the
Downloaded Graphics folder.
5. Highlight My Photos to access the photos you have taken with your phone.
Press the Select soft key to access list of photos. Press the Options soft
key to access the following options:
• View: allows you to view the photo full screen.
• Send: allows you to send the photo.
• Set as Wallpaper: allows you to set the photo selected as your wallpaper.
• Delete: allows you to delete the photo.
• Rename: allows you to rename the photo.
• Lock: allows you to lock the photo and prevent deletion.
• Properties: shows the date, time, file size, size, protection, file format, and file
name.
6. Highlight Default Wallpaper to select from the pre-loaded wallpapers on
your phone. Press the Select soft key to set the wallpaper selection.
Delete
The Delete menu option allows you to delete audio and graphics files that you have
recorded or taken, or audio or graphic files that you have downloaded. To access the
Delete option, use the following steps:
1. In Idle mode, press the Menu
soft key to access Menu mode.
2. Use the Navigation keys to highlight My Stuff and press the Select soft
key or the
key.
3. Highlight the Delete menu option and press the Select soft key. Use the Up
or Down Navigation key to select from the following:
• All
• Downloaded Audio
• Downloaded Graphics
• My Photos
4. Use the
key to mark the folder(s) you wish to delete. Press the Delete
soft key. At the confirm “Delete All?” pop-up screen press the Yes soft key
to delete or the No soft key to cancel.
83
Memory Status
Memory Status
The Memory Status menu option allows you to view the usage and available memory
for My Stuff Audio/Graphics, and My Photos memory status for your text messages.
To access the Memory Status option, use the following steps:
1. In Idle mode, press the Menu
soft key to access Menu mode.
2. Use the Navigation keys to highlight My Stuff and press the Select soft
key or the
key.
3. Highlight the Memory Status menu option and press the Select soft key.
Use the Up or Down Navigation key to cycle throught the available
categories.
4. Press the Back soft key to return to the My Stuff menu.
My Stuff Folder
84
Section 12: Games
Topics Covered
• Shop Games
• Shop Applications
• My Games
The topics covered in this section are shopping games, shopping applications, and
playing games that are pre-installed or downloaded.
Shop Games
The Shop Games menu option allows you to shop games using the WAP browser.
You can download new games and save to the My Games folder. To play a game,
see ‘My Games” on page 86.
To access the Shop Games menu option, use the following steps:
1. In Idle mode, press the Menu
soft key to access Menu mode.
2. Use the Navigation keys to highlight Games and press the Select soft key
or the
key. Shop Games is highlighted.
3. Press the Select soft key or the
key to launch the WAP browser and
select a file to download. Follow the on-screen options. The files
downloaded will be stored in the My Games folder.
Shop Applications
The Shop Applications menu option allows you to shop applications using the WAP
browser. You can download new applications and save to the My Games folder. To
access the Shop Applications menu option, use the following steps:
1. In Idle mode, press the Menu
soft key to access Menu mode.
2. Use the Navigation keys to highlight Games and press the Select soft key
or the
key.
3. Highlight Shop Applications. Press the Select soft key or the
key to
launch the WAP browser and select a file to download. Follow the onscreen options. The files downloaded will be stored in the My Games
folder.
85
My Games
My Games
To access a pre-installed game or downloaded game, highlight My Games and
press the
key. Select a game and press the
key.
Games
86
Section 13: WAP
Topics Covered
• Launching the WAP Browser
• Accessing a WAP Site
• Navigating the WAP Browser
• Using Favorites
• Downloading Multimedia Files
• Clearing the Cache
Your phone is equipped with a WAP (Wireless Application Protocol) browser which
allows you to access Internet specified for mobile phones. This section explains how
to access the WAP services of your service provider and navigate the WAP browser.
Launching the WAP Browser
1. In Idle mode, press the
key to launch the WAP browser. You can also
press the Menu soft key to access menu mode and highlight MEdia Net
and press the Select soft key or the
key.
2. Select MEdia Net Home and press the Select soft key or the
key.
Your phone is connected to the network and loads the homepage of the
Wireless Web service provider. The content of the start-up homepage
depends on your Wireless Web service provider.
3. To scroll through the screen, use the Up and Down navigation keys.
4. To exit the browser at any time, simply press the
key.
Access a WAP Site
There are several ways to access a WAP site:
• Selecting a link on the browser
• Using a bookmark item in the Favorites folder; use the Bookmarks option on the
browser menu list or Favorites menu.
• Entering a URL address manually; use the Go to URL option on the browser menu
list.
87
Navigating the WAP Browser
Navigating the WAP Browser
1. To scroll through browser items, press the Up or Down Navigation keys.
2. To select a browser item, press the
key or press the Options soft key
and choose Select.
3. To return to the previous page, press the
key, or press the Options
soft key and choose Back.
4. To access the browser menu list, press the Menu soft key.
5. To return to the start-up homepage, press the Menu soft key and select the
Home option.
Entering Text in the WAP Browser
When you are prompted to enter text, the currently active text input mode is
indicated on the screen. To change the text input mode, press the
key one or
more times.
The following modes are available:
Upper-Case Alphabet Mode (A): allows you to enter upper-case characters.
Lower-Case Alphabet Mode (a): allows you to enter lower-case characters.
Note: You can enter symbols in upper or lower case alphabet mode by pressing the 1 key.
T9 Mode (T9): allows you to enter characters by pressing one key per letter. In this
mode, you can use only the 0 key to display alternative words. To change case,
press the * key.
Number Mode (1): allows you to enter numbers.
Selecting and Using Menu Options
Various menus are available when you are using the WAP Browser to navigate the
Wireless Web.
To access a menu option, press the menu soft key. A menu list displays.
Note: The menus may vary, depending on your version of the WAP Browser.
The following options are available:
• Favorites: shows the bookmarks list. You can bookmark the current page or
access previously bookmarked pages.
• Reload: reloads the current page.
WAP
88
• Home: takes you back at any time to the homepage of the Wireless Web service
provider.
• Go to URL: allows you to manually enter the URL address of a WAP site. After
entering an address, press the OK soft key to go there directly.
• Show URL: displays the URL address of the page to which you are currently
connected. It also enables you to set the current site as the startup homepage.
• Clear Cache: deletes the information stored in the cache. The cache stores the
most recently accessed pages.
• Inbox: allows you to read messages received from a WAP server.
• Show Images: shows the image on the current page. Press the Next soft key to
view the next images.
• Certificates: shows the security information when you access the Wireless Web
with the secured WAP setting activated.
• Text Message: allows you to send messages using the WAP server.
Using Favorites
While navigating the WAP browser, you can bookmark the site to quickly and easily
access it at a future time. The URL addresses of the bookmarked sites are stored in
the Favorites folder, wherein you can use the preset URL addresses and store your
favorite URL addresses.
Accessing a WAP Site Using Favorites
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Select Favorites.
4. Select a bookmark item on the Favorite list.
Storing a URL Address
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select MEdia Net and press the Select soft key or the
key.
3. Select Favorites.
4. Select an <Empty> location, and press the Select soft key.
5. Enter the name and address and press the Save soft key or
6. When you have finished, press the
89
key.
key.
Downloading Multimedia Files
Editing a Bookmark
1. From the Favorites list, select the bookmark you want to change.
2. Select Options and select Edit.
3. Change the address and the name, as you would when storing a new one.
4. Press the Save soft key.
5. When you have finished, press the
key.
Deleting a Bookmark
1. From the Favorites list, select the bookmark you want to delete.
2. Select Options and select Delete.
3. Use the Navigation key to choose from Selected. Press the Select soft key.
4. Press the Yes soft key or the
5. When you have finished,
key to confirm the deletion.
press the
key.
Downloading Multimedia Files
You can buy a variety of multimedia files, such as ringtones, graphics, applications,
Multimedia contents, and so on from the WAP browser and download them to your
phone’s memory. Your phone has embedded links to the WAP sits providing you with
download services, preset by your service provider.
1. In Idle mode, press the Menu soft key to access Menu mode and select
AT&T Mall.
2. Highlight Shop Tones, Shop Games, Shop Graphics, Shop Multimedia,
or Shop Applications, depending on the type of items you want to buy.
To access the homepage of the online shopping mall, select MEdia Net
Home.
3. Find the item you want to download and follow the on-screen instructions
to purchase it.
Note: This content is delivered to you in Multimedia messages. You can retrieve the messages from the
server and then save the items in your phone’s memory. you cannot forward these messages to other
people or add the saved items to a Multimedia message.
Clearing the Cache
The cache is the phone’s temporary memory in which the most recently accessed
WAP pages are stored. You can clear the cache at anytime.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight MEdia Net and press the Select soft key or the
key.
WAP
90
3. Select Clear Cache.
4. Press the Yes soft key or the
5. When you have finished, press the
key to confirm the deletion.
key.
Changing the WAP Profiles
You can set up server profiles for the WAP browser.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select MEdia Net. Highlight Browser Profiles and press the Select soft
key or the
key.
3. Highlight Profile Settings and press the Select soft key or the
key.
4. Select the profile you want.
For each profile, the following options are available:
• Profile Name: enter a name that you wish to assign to the HTTP proxy server.
• Home URL: set the address of your startup homepage. When the default
key and enter your own
homepage displays, you can delete it using the
choice.
• Proxy use: place a check in the box to use the proxy server.
• GPRS setting: allows you to choose from the following options:
- Proxy Address: enter the Proxy address of the proxy server.
- Proxy Port: enter a port number or use default setting.
- APN: enter the access point name used for the address of the GPRS network
gateway.
- Login ID: enter the User ID required to connect to the GPRS network.
- Password: enter the password required to connect to the GPRS network.
Note: The WAP settings may vary depending on the service provider.
91
Health and Safety Information
Section 14: Health and Safety Information
Topics Covered
• Health and Safety Information
• Samsung Mobile Products and Recycling
• UL Certified Travel Adapter
• Consumer Information on Wireless Phones
• Road Safety
• Responsible Listening
• Operating Environment
• Using Your Phone Near Other Electronic Devices
• Potentially Explosive Environments
• Emergency Calls
• FCC Notice and Cautions
• Other Important Safety Information
• Product Performance
• Availability of Various Features/Ring Tones
• Battery Standby and Talk Time
• Battery Precautions
• Care and Maintenance
This section outlines the safety precautions associated with using your phone. These
safety precautions should be followed to safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for radio frequency (RF) energy set
by the Federal Communications Commission (FCC) of the U.S. government.
Health and Safety Information
92
These FCC exposure limits are derived from the recommendations of two expert
organizations, the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,
the recommendations were developed by scientific and engineering experts drawn
from industry, government, and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body expressed in units of watts
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a
substantial margin of safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in positions and locations (e.g. at
the ear and worn on the body) as required by the FCC. For body worn operation, this
phone has been tested and meets FCC RF exposure guidelines when used with an
accessory that contains no metal and that positions the handset a minimum of
1.5 cm from the body. Use of other accessories may not ensure compliance with FCC
RF exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model phone as reported to the FCC
are:
GSM
850
• Head: 1.24 W/Kg.
• Body-worn: 0.446 W/Kg.
93
Samsung Mobile Products and Recycling
1900
• Head: 1.17 W/Kg.
• Body-worn: 0.426 W/Kg.
SAR information on this and other model phones can be viewed on-line at
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model
phone, this site uses the phone FCC ID number which is usually printed somewhere
on the case of the phone.
Sometimes it may be necessary to remove the battery pack to find the number. Once
you have the FCC ID number for a particular phone, follow the instructions on the
website and it should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be obtained at
www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its customers to recycle
Samsung mobile phones and genuine Samsung accessories.
Go to: http://www.samsung.com/us/consumer/type/
type.do?group=mobilephones&type=mobilephones for more information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety requirements. Please
adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of Questions
and Answers for consumers relating to radio frequency (RF) exposure from wireless
phones. The FDA publication includes the following information:
Health and Safety Information
94
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio frequency energy (RF) because of
the short distance between the phone and the user's head. These RF exposures are
limited by Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with increasing
distance from the source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at far lower power
levels, and thus produce RF exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radio frequency
energy (RF) in the microwave range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
95
Consumer Information on Wireless Phones
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type emitted
by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user that
is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible information
on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon.
While these base stations operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions discussed in this
document.
Health and Safety Information
96
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories. A
few animal studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the studies that
showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other studies exposed the animals to RF
for up to 22 hours per day. These conditions are not similar to the conditions under
which people use wireless phones, so we don't know with certainty what the results
of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use of
wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phones RF exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these studies was
around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-up may be needed to
provide answers about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring actual RF exposure
during day-to-day use of wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which model of phone is used.
97
Consumer Information on Wireless Phones
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health Organization international
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result
of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF
issues.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations. CTIA-funded research
is conducted through contracts to independent investigators. The initial research will
include both laboratory studies and studies of wireless phone users. The CRADA will
also include a broad assessment of additional research needs in the context of the
latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is
- it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since the
exposure level drops off dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or use a wireless
phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from wireless
phone use.
Health and Safety Information
98
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to
radio frequency energy (RF), the measures described above would apply to children
and teenagers using wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the head. On the other hand, if
the phone is mounted against the waist or other part of the body during use, then
that part of the body will absorb more RF energy. Wireless phones marketed in the
U.S. are required to meet safety requirements regardless of whether they are used
against the head or against the body. Either configuration should result in
compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have shown that these products
generally do not work as advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an increase in RF absorption.
99
Consumer Information on Wireless Phones
In February 2002, the Federal trade Commission (FTC) charged two companies that
sold devices that claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to FTC, these defendants
lacked a reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance requirements for hearing aids and
wireless phones so that no interference occurs when a person uses a compatible
phone and a compatible hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various sources can be
obtained from the following organizations (Updated 12/1/2006):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
Health and Safety Information 100
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation
• US Food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to communicate by voice, almost
anywhere, anytime. But an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless
phone behind the wheel of a car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If possible, add an additional
layer of convenience and safety to your wireless phone with one of the
many hands free accessories available today.
3. Position your wireless phone within easy reach. Be able to access your
wireless phone without removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a
"to do" list or flipping through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are
not moving or before pulling into traffic. Try to plan calls when your car will
be stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that have the potential to divert your attention from
the road.
101
Responsible Listening
8. Use your wireless phone to call for help. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident or medical
emergencies.
9. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency number.
"The wireless industry reminds you to use your phone safely when driving."
For more information, please call 1-888-901-SAFE, or visit our web-site
www.wow-com.com.
Important!: If you are using a handset other than a standard numeric keypad, please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud sounds over time. The
risk of hearing loss increases as sound is played louder and for longer durations.
Prolonged exposure to loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that using portable
audio devices, such as portable music players and cellular telephones, at high
volume settings for long durations may lead to permanent noise-induced hearing
loss. This includes the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound has also been
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
Individual susceptibility to noise-induced hearing loss and potential hearing problem
varies. Additionally, the amount of sound produced by a portable audio device varies
depending on the nature of the sound, the device settings, and the headphones that
Health and Safety Information 102
are used. As a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings and equipment.
You should follow some commonsense recommendations when using any portable
audio device:
• Set the volume in a quiet environment and select the lowest volume at which you
can hear adequately.
• When using headphones, turn the volume down if you cannot hear the people
speaking near you or if the person sitting next to you can hear what you are
listening to.
• Do not turn the volume up to block out noisy surroundings. If you choose to listen
to your portable device in a noisy environment, you noise-cancelling headphones
to block out background environmental noise. By blocking background
environment noise, noise cancelling headphones should allow you to hear the
music at lower volumes than when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time is required
before you hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such as rock
concerts, that might cause temporary hearing loss. Temporary hearing loss might
cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you experience ringing in
your ears, hear muffled speech or experience any temporary hearing difficulty
after listening to your portable audio device, discontinue use and consult your
doctor.
You can obtain additional information on this subject from the following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: www.audiology.org
103
Operating Environment
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: nidcdinfo@nih.gov
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
Operating Environment
Remember to follow any special regulations in force in any area and always switch
your phone off whenever it is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that for the
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that the equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your shoulder if you are
using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to discuss alternatives.
Health and Safety Information 104
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained between a handheld
wireless phone and an implantable medical device, such as a pacemaker or
implantable cardioverter defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their implantable
medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to minimize the
potential for interference;
• Should turn the phone OFF immediately if there is any reason to suspect that
interference is taking place.
• Should read and follow the directions from the manufacturer of your implantable
medical device. if you have any questions about using your wireless phone with
such a device, consult your health care provider.
For more information see, http://www.fcc.gov/oet/rfsafety/rf-faqs.html
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of
such interference, you may wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information. Switch your phone
off in health care facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require you to do so.
105
Potentially Explosive Environments
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service station).
Users are reminded of the need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), areas where the
air contains chemicals or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and
landline networks as well as user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never rely solely on any wireless
phone for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and in a
service area with adequate signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for example, 911
or other official emergency number). Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example), you may first need to
deactivate those features before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information as
accurately as possible. Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off the call until given
permission to do so.
Health and Safety Information 106
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the phone or make calls that increase
your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving
equipment. The FCC can require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries, antennas and chargers. The
use of any unauthorized accessories may be dangerous and void the phone warranty
if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in the same
compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag inflates with great
force. Do not place objects, including both installed or portable wireless equipment
in the area over the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates, serious injury could
result.
107
Product Performance
• Switch your phone off before boarding an aircraft. The use of wireless phone in
aircraft is illegal and may be dangerous to the aircraft's operation.
• Failure to observe these instructions may lead to the suspension or denial of
telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your
area. Your phone informs you of the current signal strength by displaying a number
of bars next to the signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power Save feature is
automatically activated. If your phone is active, it periodically rechecks service
availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your
phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
• If your phone is equipped with an external antenna, hold the phone with the
antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the internal
antenna could inhibit call performance.
Health and Safety Information 108
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If your phone
does get wet, immediately turn the power off and remove the battery. If it is
inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require additional
subscription and/or usage charges. Not all features are available for purchase or use
in all areas. Downloadable Ring Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage patterns and conditions.
Battery power consumption depends on factors such as network configuration,
signal strength, operating temperature, features selected, frequency of calls, and
voice, data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard surface, can
potentially cause damage to the phone and battery. If you suspect damage to the
phone or battery, take it to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in serious safety
hazards.
• If you use the phone near the network's base station, it uses less power; talk and
standby time are greatly affected by the signal strength on the cellular network
and the parameters set by the network operator.
• Follow battery usage, storage and charging guidelines found in the user’s guide.
• Battery charging time depends on the remaining battery charge and the type of
battery and charger used. The battery can be charged and discharged hundreds of
times, but it will gradually wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only with
Samsung-approved chargers. When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger for more than a
week, since overcharging may shorten its life.
109
Battery Precautions
• Do not use incompatible cell phone batteries and chargers. Some Web sites and
second-hand dealers, not associated with reputable manufacturers and carriers,
might be selling incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier recommended products and
accessories. If unsure about whether a replacement battery or charger is
compatible, contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices could result
in damage to the equipment and a possible risk of fire, explosion, leakage, or other
serious hazard.
• Extreme temperatures will affect the charging capacity of your battery: it may
require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in summer or winter
conditions, as you will reduce the capacity and lifetime of the battery. Always try to
keep the battery at room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or near a
cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and appear to
operate normally, the circuitry could slowly corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object (coin, clip or pen) causes a direct connection between the + and terminals of the battery (metal strips on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal objects,
such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery as this can
cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some areas, the
disposal of batteries in household or business trash may be prohibited. For safe
disposal options for Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a fire.
Health and Safety Information 110
Care and Maintenance
Your phone is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you fulfill any warranty obligations and
allow you to enjoy this product for many years.
• Keep the phone and all its parts and accessories out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will
corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric shock to
you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts may be
damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms up to its normal
operating temperature, moisture can form inside the phone, which may damage
the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the device's moving parts and prevent
proper operation.
• Do not put the phone in or on heating devices, such as a microwave oven, a stove
or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the supplied or an
approved replacement antenna. Unauthorized antennas or modified accessories
may damage the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly, take it to
your nearest qualified service facility. The personnel there will assist you, and if
necessary, arrange for service.
111
Section 15: Accessibility
Topics Covered
• TTY Settings
TTY Settings*
TTY (also known as a TDD or Text Telephone) is a telecommunications device that
allows people who are deaf or hard of hearing, or who have speech or language
disabilities, to communicate via a telephone.
Use the following steps to access the TTY settings:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Press
(this will not be shown in the menu) and then highlight the
enable selection. Key in the password:
4-T-T-Y (4889) and press the OK soft key.
The following options are available:
• Disable: CTM is not available for use.
• Enable: CTM is active and TTY is available for use.
For additional technical support you may access the following website or call 1-888987-4357.
http://www.samsungtelecom.com/contact_us/accessibility.asp
Accessibility 112
Section 16: Warranty Information
Topics Covered
• Standard Limited Warranty
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original
purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are
free from defects in material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for the following
specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon proper use of
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or
electromechanical stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched
or damaged due to normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased outside the United States or
Canada.
113
Standard Limited Warranty
This Limited Warranty covers batteries only if battery capacity falls below 80% of
rated capacity or the battery leaks, and this Limited Warranty does not cover any
battery if (i) the battery has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery
are broken or show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period,
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to
Purchaser, any defective component part of Product. To obtain service under this
Limited Warranty, Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the date of purchase, the
serial number of Product and the sellers' name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts
or components when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases, pouches and
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced
Product will be warranted for a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days, whichever is longer. All replaced
parts, components, boards and equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges for the repair or return of
such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
Warranty Information
114
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED
BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME
STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE
115
Standard Limited Warranty
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY
BE.
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by SAMSUNG and should not be
relied upon.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the standard methods,
the data only appears to be removed on a superficial level, and it may be possible for
someone to retrieve and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this sort, it is
recommended that the device be returned to Samsung’s Customer Care Center for
an Extended File System (EFS) Clear which will eliminate all user memory and return
all settings to default settings. Please contact the Samsung Customer Care Center
for details.
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center in
order to provide this service at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Warranty Information
116
Samsung Telecommunications America, LLC
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad, dial the numbers listed
in brackets.
Phone: 1-888-987-HELP (4357)
©2007 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
117
Index
A
Accessing a Menu Function 26
Address Book
Searching for a Number 24
Alerts on Call 61
Alphabet mode 34
Audio 71
B
Battery
charging 6
installing 5
low indicator 7
removing 4
C
Call Functions 17
Adjusting the Call Volume 18
Answering a Call 19
Correcting the Number 17
Making a Call 17
Recent Calls 19
Redialing Last Number 18
Call Time 20
Call Waiting 25 68
Camera
Taking Pictures 75
camera options 76
Charging battery 6
Clear key 15
Command Keys 14
Converter 81
,
D
Data Call Time 21
Data Volume 21
Dialing a Number
Address Book 38
Display
icons 13
Display Settings 61
E
End key 15
Ending a Call 18
Entering Text 34
Changing the Text Entry Mode
34
Using Alphabet Mode 36
Using Numbers 37
Using Symbols 37
Using T9 Mode 35
F
Functions and Options 14
G
Games 71
Getting Started 4
Activating Your Phone 4
Voicemail 7
Graphics 72 73 82
Greeting Message 66
, ,
H
Health and Safety Information 92
I
Icons, description 13
International Call 17
K
Keypad Tone 60
L
Left soft key 15
Low battery indicator 7
118
M
Making a Call
Address Book 18
Menu Navigation 26
Menu Outline 27
Messaging 50
Types of Messages 50
Missed Call
Deleting 20
Viewing 19
Multimedia Files
Downloading 90
Mute 24
N
Navigation key 16
Network Selection 69
Network Services
Call Forwarding 67
Network Services Settings 67
Number mode 34
O
Options
During a Call 22
Putting a Call on Hold 22
P
Phone
icons 13
Phone Lock 64
PIN
Change 65
PIN Check 64
Powering on/off
phone 7
119
113
Storing a Number
Address Book 39 41
Storing a number
Phone’s Memory 39
SIM Card 41
,
T
T9 Mode
enter a word 35
T9 mode 34
Text Input Mode
Changing 34
Travel adapter 6
U
R
Right soft key 15
S
Security 64
Send key 15
Service Dialing Numbers 48
Settings 59
Shortcuts 27
SIM card
installing 4
removing 5
Soft Keys 15
Sound Settings 59
Speakerphone Key 16
Speed Dial
Setting Up Entries 44
Standard Limited Warranty
Understanding Your Address book 38
Adding a New Contact 39
Group 47
Management 47
Own Phone Number 47
Speed Dial 44
Using Contacts List 38
Understanding Your Phone 9
Features of Your Phone 9
Front View of Your Phone 10
Open View of Your Phone 10
Using Management
Checking the Memory Status
48
Copying all to Phone 47
Deleting all of the Phone book
Entries 47
V
Voice Mail 19
changing number 8
W
Warranty Information 113
120
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising