Manual - WDS-1010P Mini Speed Dome Camera Original

Manual - WDS-1010P Mini Speed Dome Camera Original

INDOOR, OUTDOOR

Mini Speed Dome Camera

User Manual

WARNINGS and CAUTIONS

WARNINGS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.

DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

DO NOT INSERT ANY MEALMETALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHERS

OPENINGS ON THE EQUIPMENT.

CAUTIONS

CAUTIONS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER(OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lighting flash with arrowhead symbol, within a triangle, is intended to alert the user to the presence of un insulated dangerous voltage within the product enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the product.

2

COMPLIANCE STATEMENT

FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS

FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE

DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE

EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES,

AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE

WITH THE INSTRUCTION MANUAL, MAY CAUSE HAARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE

IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR

COMPLIANCE COULD VOID THE USER’S AUTHOURITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE A EST CONFORME A LA NORME NMB-003 DU CANADA.

CE COMPLIANCE STATEMENT

WARNING

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY CAUSE RADIO

INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.

3

IMPORTANT SAFEGUARDS

u

Please install the product on a completely flat floor.

- Always check the strength and stability of the insta llation location.

- Do not drop the appliance on the floor. This may result in damage or injury. u

Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or covers.

- There are no user - serviceable parts inside. Contact qual ified service personnel for maintenance. u

Stop using the appliance if there appears to be any operational problem.

- Immediately turn the power off to the appliance if there is any abnormal condition such as smoke or unusual smells.

- Continuing to use the ap pliance under abnormal conditions may result in serious damage. u

Always use the recommended power.

- Using incorrect power source ratings may result in fire, electric shock, or damage. u

-

-

-

Always handle the connection cable with care.

Never damage or modify the connection cable.

Do not pull, expose to heat, or place heavy objects on the connection cable.

Non observance of these warnings may result in fire, electric shock or damage. u

Never use the appliance in places where there are flammable materials.

- Never use the appliance in places where flammable materials such as gas are used.

This may result in fire, explosion, and other serious accidents. u

Never touch un - insulated parts with wet hands.

- Touching un - insulated parts with wet hands may result in serious elect ric shock. u

Never expose the appliance to water or moisture.

- If the appliance gets wet, immediately turn the power off.

- Stop using the appliance if it gets wet. Contact the manufacturer immediately. u

Use the appliance indoors only.

- Do not place the applian ce outdoors or expose it to rain or moisture.

- If dropped in water, the appliance may be corroded and damage. u

Do not use the appliance where there is excessive dust, smoke, or moisture.

- Using the appliance under such conditions may result in fire, electric shock or serious damage. u

If the controller body gets dirty, turn the power off and wipe the surface with a soft cloth.

- Do not use chemical agents such as alcohol or benzene.

4

TABLE of CONTENTS

-WARNINGS AND CAUTIONS

-COMPLIANCE STATEMENT

-CE COMPLIANCE STATEMENT

-IMPORTANT SAFEGUARDS

INDOOR

-TABLE of CONTENTS

-INTRODUCTION

-PACKAGE CONTENTS

-INSTALLATION & CONFIGURATION

--Basic configuration of Dome

--Rear View

--Swith Settings

--Before Installation

--Surface Mount Installation

--Inceiling Installation

-DIMENSION

-SPECIFICATION

-PACKAGE CONTENTS

-INSTALLATION & CONFIGURATION

--Basic configuration of Dome

--Rear View

--Swith Settings

--Before Installation

--Wall Mount Installation

--Ceiling Mount Installation

-DIMENSION

-SPECIFICATION

- OPERATION & PROGRAMMING

--Getting Started

--Basic Operations

--Title Edit

--Menu Tree

--System : Information

Reboot

Factory

Event Log

Password

5

36

37

38

39

40

41

42

43

44

22

23

24

26

27

30

34

35

8

9

10

12

13

16

18

19

20

21

5

6

7

2

3

3

4

--Display : OSD Setup

Area Title

Privacy Zone

Image Setup

--Dome : General

Motion

Home

Preset

Tour

Pattem

Scan

--Camera : Focus/Zoom

Shite Balance

Exposure

Advanced Setup

--Alarm

TABLE of CONTENTS

58

59

60

61

53

54

55

56

57

45

46

47

48

49

50

52

5

INTRODUCTION

The Controller and Mini Speed dome make up the building blocks for any surveillance / security system.

Using a multiple Controller and multiple dome cameras, no place is too large for monitoring and recording.

Extendable and flexible architecture facilitates remote control functions for a variety of external switching devices such as DVR, Matrix switcher and Dome Camera

FEATURES

Lens

Power

Address Range

Preset

Tour

Pattern

Scan

Privacy Zone

Area Titles

Alarm

Protocol

Communication

Manual Speed

Preset Speed

Proportional Pan

MINI SPEED DOME MINI SPEED DOME

100x(10x Optical, 10x Digital)

1/4 inch lnterline Transfer CCD

240 Position

8(Preset, Tour, Pattem and Scan)

8(Total 960 seconds)

0.2 /sec ~ 400 /sec

Max 400 /sec

Yes

8 including Vector Scan

32 zones (8 groups)

8

12~24VDC (12~24AC Optional)

99 ID (255 ID Optional)

4 input(NO/NC), 1 output(NO/NC/COM, 24V 1A open dry contact)

Auto Protocol Recognition (Standard, Pelco-D, Pelco-P etc.)

RS-485 Half duplex. Max 4000 ft (1.2Km)

GG

Precautions for proper Operation

* Do not install the unit a place subject to direct sunlight, excessive moisture, dust or vibrations

where ventilation is poor.

* Please use the unit in the range of a guarantee temperature and humidity of operation.

* Please set ID of a camera as the same number as the input channel to DVR or Matrix switcher.

6

X

Manual

[

Y

\ ]

Z

^ _

}‹Œ–

{yR

{yT

}‹Œ–G•

}‹Œ–G•

}‹Œ–G–œ› w–žŒ™

CAM : 001 BAND

INPUT ? :

{yR

{yT w–žŒ™

CAM : 001 BAND

INPUT ? :

Before installation, please s

If you are going to use pelco-D, pelco-P or standard protocols to communicate with the dome system, you do not have to set any switches. The unit automatically detects these protocols. See Table A for details.

vu

X Y Z [ \

vu

X

Y

Z [ \ vu

X Y Z [ \

G

}‹Œ–

{yR

{yT w–žŒ™

CAM : 001 BAND

INPUT ? :

{yR

{yT w–žŒ™

CAM : 001 BAND

INPUT ? :

87

57

SYSTEM

>

DOME

>

>

DISPLAY

GGGGGGGGGGGGG

G GGGGGGGG GGGGG GG

GG

G

G

G

G

G

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement