Miller Electric A.B.B. Robot Interface Gas Control Hub And Spindle Specification

Miller Electric A.B.B. Robot Interface Gas Control Hub And Spindle Specification
Axcess Systems
Issued February 2007 • Index No. AU/8.0
®
Digital Semi-Automatic and
Robotic Welding Systems
®
Software Driven Multi-MIG Process Platform
Manufacturing
Applications
Quick
Specs
Processes
Rated Output
Multi-MIG®
Accu-Pulse® MIG (GMAW-P)
- Accu-Curve™ MIG (GMAW-P)
- Accu-Speed™ MIG (GMAW-P)
Pulsed MIG (GMAW-P)
MIG (GMAW)
Metal Core
Carbon Arc Gouging (CAC-A) can
also be activated (Axcess only)
Construction Equipment
Automotive Components
Recreational Vehicles
Farm Machinery
Office Furniture
Mining Machinery
300: 300 A at 32 VDC, 60% Duty Cycle
(225 A at 29 VDC, 100% Duty Cycle)
450: 450 A at 44 VDC, 100% Duty Cycle
675: 675 A at 44 VDC, 100% Duty Cycle
Voltage Range 10 – 44 V
Auxiliary Power 120 VAC, 10 A Duplex
Ship Weight 300: 116 lb (52.6 kg)
450: 163 lb (72.9 kg)
675: 208 lb (94.3 kg)
FREE TRIAL! See page 2 for details
RMD™ (GMAW-SCT) Optional
The Power of Blue .
®
Flexible, Expandable and Upgradeable
Multi-MIG capable welding systems are precise,
digitally controlled and software-driven. For additional
information visit MillerWelds.com/AMS.
Axcess Power Systems
for Semi-Automatic
Applications
Auto-Axcess Power Systems for
Robotic/Automation Applications
Shown with AA-40GB
with OCP wire drive
motor assemblies
Shown with Axcess feeders
Axcess digital control technology combined
with inverter welding power source is
designed to reduce complexity of a semi-automatic
or robotic pulsed MIG system, simplify installation
and provide superior welding performance.
Axcess four-drive-roll wire drive feeder is
combined with operator interface leaving no
controls back at the power source. Provides
positive feeding for the appropriate
preprogrammed wire diameters from
50 –1400 IPM and operates from 40 VDC
supplied by Axcess power source.
“Axcess” the ability to accommodate welding
data file exchange through downloadable upgrades
and new hybrid welding processes using e-mail, or
the Web and a Palm™ handheld (PDA).
Go to the online Axcess
System Configurator at
MillerWelds.com/AMS
AA-40GB motor connections.
AA-40GB Wire Drive Motor Assembly with OCP
(Over Current Protection) to protect against current
surges. New design utilizes an improved sheet
metal enclosure including printed circuit board. It
features a threaded gas connection and a directpanel-mounted, quarter-turn motor control cable
connection that eliminates motion stress on the
motor’s power and tachometer feedback wires.
DESIGNED
Power source is warranted for 3 years, parts and labor.
AND BUILT IN
Miller Electric Mfg. Co.
International Headquarters
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
www.MillerWelds.com
Features and Benefits
(Common to all Axcess Systems.)
HARDWARE (Standard)
Miller’s patented technology allows for any input voltage hook-up (190 – 630 V) with no manual linking. Assures
rock-solid, consistent output on fluctuating primary lines.
Wind Tunnel Technology™
Circulates air over components that require cooling, not over electronic circuitry, which reduces contaminants and
improves reliability in harsh welding environments.
1/4-turn steel connectors
Allow for faster installation of system and eliminates thread stripping.
™
Fan-On-Demand
Cooling system operates only when needed. Reduces amount of airborne contaminants pulled through the machine.
115 VAC duplex receptacle
Provides 10 amp circuit-breaker-protected auxiliary power regardless of primary power.
Dual removable lifting eyes
For moving with overhead lifts. Removability allows for flat-top feeder or storage on top.
Forklift slots
Slots cut into the frame for forklift transportation.
Matching footprints
All models use common stacked power modules allowing small footprint.
Flexible feeding options
Several different wire feeding and operator interface options are available and configurable to desired application.
9-pin Palm handheld (PDA)
and 9-pin RS-232 serial
communication port
Separate ports provide Axcess with data transfer and optional program downloads.
™
SOFTWARE (Standard)
FREE
®
8
™
Hour Trial of RMD with Every New Axcess or Auto-Axcess Power Supply
Multi-MIG capability
Includes common carbon steel, aluminum and stainless welding programs, including new patented Accu-Pulse®,
standard or adaptive pulse, conventional MIG and metal core programs using the most popular wire diameters and
gas combinations. Now with Accu-Curve ™ and Accu-Speed ™.
Accu-Pulse®
MIG process that delivers precise control of the arc even over tack welds and in tight corners. Provides optimum
molten puddle control for out-of-position welding.
SureStart ™
Provides consistent arc starts by electronically assuring a ball is not left on the wire when welding is stopped. This
provides a predictable condition for the next arc start and combines this with precisely tuned arc starting routines.
Arc Control
Control offers a simple way to tailor factory pulse weld programs by adjusting the arc plasma cone to accommodate
a variety of welding applications without the need for any reprogramming or changing any hardware.
Arc Adjust
Allows a simple method that controls arc length for pulse processes and wetting action for RMD.
Remote/trigger program select
Allows changing weld programs to take advantage of up to 8 programs of Multi-MIG welding process capabilities.
Optional Axcess-able software
RMD™ (Regulated Metal Deposition), Palm™ Axcess file management system, WaveWriter ™ Palm pulse wave shaping.
®
Multi-MIG Process Capability — Through Software-Based Programs
“Axcess®” the ideal welding process for any
weld joint at hand. Whether you need high travel
speed combined with high deposition rates or
require gaps to be filled, any combination of the
available welding processes can be “Axcess”-ed
either at the start of a welding sequence or
Process
Weld Puddle
Control
Standard Spray
Flat/Horizontal
anywhere in the weld while actually welding by
using trigger or remote program select.
For a given wire-feed speed, the chart below
shows from left (hottest) to right (coolest) all
the possible arc mode transfer ranges of
p
Pulsed Spray
Accu-Pulse®
Accu-Speed™
Accu-Curve™
“Axcess”-able MIG processes. This shows
compatible spray gas combinations such as
90 Ar/10 CO2 (90% Argon and 10% Carbon
Dioxide) on steel using the same wire-feed speed
and also gives an indication of puddle control
characteristics based on arc type selected.
y
Standard
Short Circuit
All Position Performance
RMD™ Regulated
Metal Deposition (Optional)
Thin Materials/Gap Filling
Note: To achieve optimum performance, 4/0 welding power secondary cable is recommended and the supplied work-sense lead must be connected as close to arc as possible.
2
Learn More at MillerWelds.com/AMS
Featured Welding Process
Accu-Pulse ®
STANDARD pre-programmed
Accu-Pulse
welding processes include
(CV Peak/Background)
patented Accu-Pulse, 2 new
Taught Peak Voltage
Voltage
Accu-Pulse programs called
Taught Background
™
Accu-Curve™ and Accu-Speed ,
Voltage
conventional MIG and pulsed MIG
Fixed current beginning points
optimized for the most common
CC Ramps
steel, stainless steel, aluminum
and metal-cored wires, using the Current
most common wire diameters
Min Current Limit
CV Peak CV Background CV Peak
and gas combinations. Programs
CV Background
for new processes and different
materials are planned and
currently in development. In most cases, slightly different ratios of gas mixtures will perform well
using a similar program and adjusting arc length or the appropriate arc control for the selected
process. Contact Miller for more information on less common materials and gas combinations.
Benefits of Accu-Pulse ®
(Compared to conventional pulse)
Shorter arc lengths possible
Better puddle control
More tolerant of contact tip to work variation
Less audible noise
No arc wandering in tight corners
Narrow arc plasma column
Allows weld to fill in at toes increasing
travel speed and deposition
More tolerant of poor fit up and gaps
(compared to standard pulse)
Ideal for robot seam tracking applications
Accu-Curve™
STANDARD on all Axcess models — Accu-Curve
is a variation of the Accu-Pulse process. The
transitions from peaks to background voltage are
“curved”. The curved transitions provide a “softer”
feel without sacrificing the tight arc lengths that
allow for better puddle control that have become
the hallmark of the Accu-Pulse process.
Benefits of NEW! Accu-Curve ™
“Softer” feel than Accu-Pulse
Maintains tight arc lengths
Maintains better puddle control
Accu-Speed™
STANDARD on all Axcess models — Accu-Speed
is a variation of the Accu-Pulse process and
was developed for the type of arcs needed in
automated welding applications. Accu-Speed
has a tighter driving arc that can be directed into
the joint, yet still remains stable at the higher
travel speeds used in automated welding. In
general, Accu-Speed has lower average voltage
and amperage when compared to Accu-Pulse.
Note: Accu-Curve and Accu-Speed can be
added to existing Axcess or Auto-Axcess
systems for FREE by updating code online at
MillerWelds.com/AMS/axcess. Requires Palm
handheld to transfer code from PC to Axcess.
Benefits of NEW! Accu-Speed™
Up to 20% greater travel speed than
Accu-Pulse
Lower average voltage/amperage than
Accu-Pulse
Tight, driving arc
Remains stable at higher travel speeds
Software-Based Welding Process Option
RMD™ (Regulated Metal Deposition)
Field
#195 252
(serial # must be provided)
Field installation requires Palm
handheld.
Note: Factory-installed software
can be ordered as a combo-number
option with power supply. See
power source stock number listings
on page 12.
RMD Ball Transfer
Current
Wave Form
The unique patented design of
Pre-short
Clear
Blink
Background
Ball
<- Wet -> Pinch
RMD (Regulated Metal Deposition)
is a precisely controlled shortcircuit transfer. It is a method of detecting when the short is going to clear and then rapidly reacting to
this data changing the current levels. Features Proactive Dynamic Puddle Control.
Benefits of RMD
Weld suited to thin materials
Can replace TIG process in some
applications
Gap filling
Spatter reduction
Provides less heat into work piece
Excellent performance on stainless steel
Can be combined with other
Axcess®-related programs
Minimize distortion
Use larger diameter wire on thin materials
Note: Palm handheld required for field option installation — Field kit includes connection for Palm
to connect to Axcess.
Learn More at MillerWelds.com/AMS
3
Axcess Control Panels
®
Front Panel
Rear Panel
4
5
MADE IN
MILLER ELECTRIC MFG. CO., APPLETON, WI
2
6
7
3
1
1. Power Switch
2. Handheld RS-232 Port
3. PC-Communication RS-232 Port
(Future use)
4.
5.
6.
7.
Network Feeder Connector
115 VAC, 10 A Duplex Receptacle
Circuit Breakers
DeviceNet Connector (Optional)
7 in
(178 mm)
1
2
8
Program
Volts
Time
Arc Adjust
WFS
Amps
Arc Ctl
3
Single Axcess
Feeder and
Remote Operator
Interface (ROI)
9
Sequence
Trigger Control
Trigger Hold
Process
Wire Type
Gas Type
4
13 in
(330 mm)
10
11
Process Set Up
Adjust
Feeder Set Up
5
6
12
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Voltage/Arc Adjust Display Meter
Program Display
Program # Select
Process Setup Button
Control Knob
Trigger Receptacle
On/Off Button
Voltage Setup Button
Wire Speed Setup Button
Wire Speed/Amperage
Display Meter
11. Feeder Setup Button
12. Jog/Purge Switch
7
Capabilities
Dual Schedule — Toggle between two settings
using a single wire.
4T — When trigger is released, output will
operate at different ranges.
Trigger Program Select (TPS) — Provides the
ability to “Axcess” any of the Multi-MIG®
processes or any of the eight active programs.
Trigger Dual Schedule (TDS) — When activated
allow selection between predetermined program
pairs (e.g. 1,2 – 3,4 – 5,6 – 7,8).
Trigger Hold (TH) — When activated, allows
gun trigger release and continuous welding until
trigger is pulled again.
Carbon Arc Gouging (CAC-A)— Can be activated.
Sequence
Preflow: 0.1– 5 sec
Start Power: 0.1– 5 sec
Crater: 0.1– 5 sec
Postflow: 0.1– 5 sec
Arc Adjust — Arc length (Trim)
Arc Control — Arc force or focus (SharpArc®)
Process Selection — Accu-Pulse®, Pulsed MIG,
MIG, Metal Core, RMD™ (Optional)
4
Learn More at MillerWelds.com/AMS
Auto-Axcess Control Panels
®
7
8
1
MADE IN
2
3
MILLER ELECTRIC MFG. CO., APPLETON, WI
9
Front Panel
10
11
4
5
12
13
6
14
15
Back Panel
72-pin Harting connector
for quick, easy connection to
common robot controllers
(ABB, Fanuc, and Motoman)
with optional adapter cables.
Analog robot controls.
16
17
18
19
1.
2.
3.
4.
5.
6.
7.
Voltage/Arc Adjust Display Meter
Program Display
Program # Select
Power Switch
Process Setup Button
Control Knob
Wire Speed/Amperage Display Meter
8.
9.
10.
11.
Purge Pushbutton
Handheld RS-232 Port
Jog Forward Pushbutton
PC-Communication RS-232 Port
(Future use)
12. Jog Retract Pushbutton
13. Wire Feed/Amperage Select
14.
15.
16.
17.
18.
Arc Control
Peripheral Connector
Robot Connection
Motor Connector
DeviceNet Connector
(Optional)
19. 115 VAC, 10 A Duplex Receptacle
Front Panel Features
Weld Process Selection
Wire Size and Type
Gas Type
Wire Jog Forward Button
Wire Jog Reverse Button
Purge Button
Digital Display Meters:
• Voltage / Arc Adjust (Trim)
• Wire Feed Speed/Amperage
Program Number
Arc Control
(SharpArc® and Inductance)
Digital Outputs
Arc On
Wire Stick
Welder Ready
Capabilities
Auto-CAL (Automatic Calibration) — Patented
software-based feature exclusive to Auto-Axcess.
Allows simple, quick and accurate wire feed
speed and voltage commands from most robots
using analog signals. Auto-Axcess calibrates
itself to deliver exact responses to commands
from robots. This allows Auto-Axcess to be
used interchangeably with many brands of
robots, and allows quick replacement of
competitive power supplies without the need to
change wire feed speeds.
Remote Program Select — Allows changing
weld programs from the robot controller to take
advantage of up to eight programs or Multi-MIG®
welding process capabilities.
Integrated 80 V Touch Sensor — To be used
with external circuitry or peripheral equipment
when touch sensing.
Learn More at MillerWelds.com/AMS
Analog Outputs
Voltage
Current
Analog Inputs
Voltage/Arc Adjust (Trim)
Wire Feed Speed
Digital Inputs
Start
Jog Forward
Jog Reverse
Purge
Program Select
E-Stop
Auto Setup
Robot Specific
Sequence
Preflow: 0 – 9.9 sec
Start Power: 0 – 2.5 sec
Voltage: 10 – 44
IPM: 50 –1400
Crater: 0 – 2.5 sec
Retract
Postflow: 0 – 9.9 sec
5
Typical Axcess Installations
®
(Semi-Automatic Pulsed MIG or Conventional MIG)
The Axcess platform is designed to provide multiple wire feeding configurations suited to the unique needs of modern manufacturing applications and
industries. It utilizes many common components to minimize both part and maintenance complexity. All motors operate on 40 VDC provided by the
Axcess power supply and have a wire feed speed range of 50–1400 inches per minute. A common operator interface is used on all (see page 4).
Standard Installation
DeviceNet Interconnecting
Feeder Control Cable
5 ft (1.5 m)
#195 240
10 ft (3 m)
#195 241
25 ft (7.6 m) #195 242
50 ft (15.2 m) #195 243
A typical bench/sled feeder
installation. For use when
the feeder is placed on the
power supply, a bench or
an optional cart.
1
Gun
(must be ordered
separately.)
2
AND
Axcess Wire Feeder (Drive rolls must be ordered separately.)
Axcess Power Source
ROI Option Installation
Allows feeder motor drive
to be placed away from
power supply and operator
interface. Ideal for fixed
automation applications
and updating or replacing
equipment on booms or
other applications where
separate location of power
source, ROI, and wire
Axcess Power Source
drive motor is desirable.
Boom Retrofit
Applications
DeviceNet Interconnecting
Feeder Control Cable
5 ft (1.5 m)
#195 240
10 ft (3 m)
#195 241
25 ft (7.6 m) #195 242
50 ft (15.2 m) #195 243
1
Motor Control Cable
10 ft (3 m)
#300 259
20 ft (6.1 m) #300 097
30 ft (9 m)
#300 096
50 ft (15.2 m) #300 098
Feeder Base
#195 369 (see page 10)
Flexible Mounting
Options
Gun
(must be ordered
separately.)
21-ft Trigger Control Cable #300 129
3
AND
4
AND
ROI
(Remote Operator Interface)
AA-40GB Wire Drive Motor Assembly
(Drive rolls must be ordered separately.)
1 Axcess Semi-Automatic Power Source
Voltage
Range
Amperage
Range
Max. OpenCircuit Voltage
Amps Input at Rated Output, 50/60 Hz, 3-Phase
208 V 230 V 400 V 460 V 575 V KVA KW
300 A at 32 VDC,
60% Duty Cycle
(225 A at 29 VDC,
100% Duty Cycle)
10 – 44 V
5 – 400 A
80 VDC
33
29.7
16.9
14.6
11.6
11.7 11.2
Axcess
450
450 A at 44 VDC,
100% Duty Cycle
10 – 44 V
5 – 600 A
80 VDC
—
60
33.7
28.8
22.8
22.2 23.1
Axcess
675*
675 A at 44 VDC,
100% Duty Cycle
10 – 44 V
5 – 900 A
80 VDC
—
89.7
—
43.7
34.8
35.7 34.4
Model
Rated Output
Axcess
300
Certified to both the Canadian and U.S. Standards for welding equipment.
Net
Weight
Dimensions
300 H: 23 in (584 mm)
450 H: 31 in (787 mm)
675 H: 39 in (991 mm)
W: 17 in (432 mm)
D: 22-1/2 in (572 mm)
116 lb
(52.6 kg)
163 lb
(73.9 kg)
208 lb
(94.3 kg)
*Axcess 675 is not CSA approved.
2 Wire Feeder Options
Wire feeders do NOT
include drive rolls or
required DeviceNet
Interconnecting
Feeder Control Cable.
These must be
ordered separately.
Single
Feeder
Model
Gas
Valve
Axcess
Bench/Sled
Feeder
Included 40 VDC
(from
Axcess)
Type of
Input Power
Connection to
Power Source
Dual
Feeder
Wire Feed
Speed Range*
DeviceNet Interconnecting 50 –1400 IPM
Feeder Control Cable —
(1.3 – 35.56 MPM)
5, 10, 25, or 50 ft
(Order separately)
Axcess Single Feeder #195 182
Axcess Dual Feeder
#195 325
Feeder is designed specifically for Axcess. Provides
single-range control of 50–1400 inches per minute.
Dual-wire model provides the same functionality as
single-wire version, but is ideal when two different wire
types need to be available at the same time. Digitally
communicates with Axcess power source via DeviceNet
Interconnecting Feeder Control Cable.
Wire Diameter
Range
Single Feeder
Dimensions
Dual Feeder
Dimensions
.035 – 3/32 in
(0.9 –1.6 mm)
H: 14-1/2 in (368 mm)
W: 12-1/2 in (318 mm)
D: 27 in (686 mm)
H: 15 in (381 mm) Single Feeder
W: 19 in (483 mm) 49 lb (22 kg)
D: 34 in (863 mm) Dual Feeder
124 lb (56 kg)
Ship Weight
*This is the wire feed speed range while using MIG. With pulsed MIG, the wire feed speed range may be more limited.
6
Learn More at MillerWelds.com/AMS
3 ROI (Remote Operator Interface) Options
ROI does NOT include AA-40GB Wire Drive Motor Assembly, Motor Control Cable or
DeviceNet Interconnecting Feeder Control Cable. These must be ordered separately.
MIG gun (required,
order separately).
Auto ROI back panel
showing connections for
input and output signals.
Dual ROI
Single ROI
Single ROI #195 238
Dual ROI
#195 433
The ROI allows the Axcess power supply, wire
drive motor assembly and operator interface (ROI)
to be located in three separate places. This is
desirable for mounting to custom jibs, booms or
other extended-reach applications. Since an ROI
system can incorporate separate components
providing the most flexibility for custom applications, it’s an ideal way to obtain the many
benefits of the Axcess while retaining an existing
boom or other structural asset. The dual-wire ROI
provides the same functionality as the single,
but controls two separate wire drive motor
assemblies. Four programs are available per side.
Note: For non-Miller boom and jib mounting, see
ROI installation diagram on page 6 and select desired
cable lengths.
Pipe post NOT included.
Must be ordered separately.
• 4 ft Pipe Post with
18 in Base #149 838
• 6 ft Pipe Post with
18 in Base #149 839
DeviceNet Interconnecting Cable NOT included
(required, order separately).
Auto ROI #195 239*
(Contact Applications for assistance at
920-954-3814 prior to any new installation.)
The Auto ROI is to be used with an Axcess
power supply with the E-Stop option. Provides
functionality of the ROI, but replaces sequence
and trigger functions with two programmable
inputs and outputs. To be used in simple
dedicated/fixed/hard automation applications.
Features arc established output. Includes 30 ft
cable for wiring to other external devices.
Axcess® ROI Swingarc™ Boom-Mounted
Wire Feeders
#195 484 12 ft (3.7 m) Single-Wire
#195 434 12 ft (3.7 m) Dual-Wire
#195 346 16 ft (4.9 m) Single-Wire
#195 435 16 ft (4.9 m) Dual-Wire
Swingarc boom-mounted semiautomatic wire
feeders bring an extra dimension of flexibility
and efficiency to high-production MIG welding
stations. You get an effective solution that
maximizes output, especially when dealing with
large weldments and hard-to-reach places.
*Requires Axcess power supply with E-Stop function
option. E-Stop is not intended for continuous
interruption applications. Axcess systems require
approximately 30 seconds to reboot or come back
online after recovering from an E-Stop condition.
Dual Swingarc Retrofit Kit #300 032
Kit is required when replacing motors on older
Miller Dual 60 Series Swingarc booms. Provides
all of the Axcess benefits, but maintains existing
dual-boom hardware.
Note: For non-Miller boom and jib mounting, see
ROI installation diagram on page 6 and select desired
cable lengths.
21-ft Trigger Control Cable #300 129
Required when retrofitting non-Miller booms
with an ROI option.
Model
Type of Input Power
Connection to Motor
Connection to Power Source
Single ROI Dimensions
Dual ROI Dimensions
Ship Weight
ROI
Supplied from
power source
Motor Control Cable —
20, 30, or 50 ft
(Order separately)
DeviceNet Interconnecting
Feeder Control Cable —
5, 10, 25, or 50 ft
(Order separately)
H: 13 in (330 mm)
W: 7 in (178 mm)
D: 7 in (178 mm)
H: 13 in (330 mm)
W: 9 in (229 mm)
D: 10 in (254 mm)
Single ROI
12 lb (5.4 kg)
Dual ROI
15 lb (6.8 kg)
4 Wire Drive Motor Assembly Options
(To be used with Remote Operator Interface.)
Wire drive motor assemblies do NOT include drive rolls or required Motor Control Cable. These must be ordered separately.
Note: Left- and right-hand drives are determined by facing the wire feed gun outlet.
now mounts directly to the gas box, reducing
strain on the tachometer wires. OCP provides
another layer of protection in the event a cable
is damaged or shorted, reducing downtime
and motor damage. Motors include a 50 ft
volt-sense lead.
AA-40GB Wire Drive Motor Assembly
#195 426 Left-Hand Drive
#195 515 Right-Hand Drive
The AA-40GB Wire Drive Motor Assembly with
OCP (Over Current Protection) is an improved
version of the AA-40G. The motor control cable
Model
AA-40GB
Gas
Valve
Type of Input
Power
Included
and
enclosed
40 VDC
(from Axcess)
Connection to ROI
Motor Control Cable—
20, 30, or 50 ft
(Order separately)
Wire Feed
Speed Range*
Wire Diameter
Range
AA-40GB
Dimensions
Ship
Weight
50 –1400 IPM
(1.3 – 35.56 MPM)
.035 – 3/32 in
(0.9 –1.6 mm)
H: 8 in (203 mm)
W: 12 in (305 mm)
D: 10 in (254 mm)
23 lb
(10.4 kg)
*This is the wire feed speed range while using MIG. With pulsed MIG, the wire feed speed range may be more limited.
Learn More at MillerWelds.com/AMS
7
Typical Auto-Axcess Installation
®
(Robotic/Automation Pulsed MIG or Conventional MIG)
The Auto-Axcess platform is designed to bring the benefits of digital control technology to manufacturers who currently use analog robot control. When
combined with a Smart Cable (#300 012) and AA-40GB wire drive motor assembly the Auto-Axcess will automatically reconfigure itself to function as a
semi-automatic, thereby providing for single asset management and simplicity. Contact Robot Manufacturers for fully-digital versions of the Axcess
compatible with specific robot controllers.
Motoman/Fanuc Motor Mount #300 013
Motor mounts from other robot brands must be supplied
by robot manufacturer or system integrator.
AA-40GB Wire Drive Motor Assembly
Motor Control Cable
20 ft (6.1 m) #300 097
30 ft (9 m)
#300 096
50 ft (15.2 m) #300 098
Must be ordered separately.
Positive (+)
Weld Cable
Must be ordered
separately.
Torch
Must be ordered
separately.
Auto-Axcess
Power Source
50 ft Work-Sense Cable
Supplied with AA-40GB
Wire Drive Motor Assembly
Should be connected as close
to arc as possible for
optimum performance.
Negative (–) Weld Cable
Must be ordered separately.
Robot Cell Base
Auto-Axcess Power Source
Voltage
Range
Amperage
Range
Max. OpenCircuit
Voltage
Amps Input at Rated Output, 50/60 Hz, 3-Phase
208 V 230 V 400 V 460 V 575 V KVA KW
Model
Rated Output
Auto-Axcess
300
300 A at 32 VDC,
60% Duty Cycle
(225 A at 29 VDC,
100% Duty Cycle)
10 – 44 V
5 – 400 A
80 VDC
33
29.7
16.9
14.6
11.6
11.7 11.2
Auto-Axcess
450
450 A at 44 VDC,
100% Duty Cycle
10 – 44 V
5 – 600 A
80 VDC
—
60
33.7
28.8
22.8
22.2 23.1
Auto-Axcess
675*
675 A at 44 VDC,
100% Duty Cycle
10 – 44 V
5 – 900 A
80 VDC
—
89.7
—
43.7
34.8
35.7 34.4
Certified to both the Canadian and U.S. Standards for welding equipment.
Dimensions
300 H: 23 in (584 mm)
450 H: 31 in (787 mm)
675 H: 39 in (991 mm)
W: 17 in (432 mm)
D: 22-1/2 in (572 mm)
Net
Weight
116 lb
(52.6 kg)
163 lb
(73.9 kg)
208 lb
(94.3 kg)
*Auto-Axcess 675 is not CSA approved.
Wire Drive Motor Assembly
Wire drive motor assemblies do NOT include drive rolls or required Motor Control Cable. These must be ordered separately.
Note: Left- and right-hand drives are determined by facing the wire feed gun outlet.
AA-40GB Wire Drive Motor Assembly
#195 426 Left-Hand Drive
#195 515 Right-Hand Drive
The AA-40GB Wire Drive Motor Assembly with
OCP (Over Current Protection) is an improved
version of the AA-40G. The motor control cable
Model
AA-40GB
now mounts directly to the gas box, reducing
strain on the tachometer wires. OCP provides
another layer of protection in the event a cable
is damaged or shorted, reducing downtime
and motor damage. Motors include a 50 ft
volt-sense lead.
Gas
Valve
Type of Input
Power
Connection to
Power Source
Wire Feed
Speed Range*
Wire Diameter
Range
AA-40GB
Dimensions
Ship
Weight
Included
and
enclosed
40 VDC (from
Auto-Axcess)
Motor Control Cable—
20, 30, or 50 ft
(Order separately)
50 –1400 IPM
(1.3 – 35.56 MPM)
.035 – 3/32 in
(0.9 –1.6 mm)
H: 8 in (203 mm)
W: 12 in (305 mm)
D: 10 in (254 mm)
23 lb
(10.4 kg)
*This is the wire feed speed range while using MIG. With pulsed MIG, the wire feed speed range may be more limited.
8
Learn More at MillerWelds.com/AMS
Palm OS® Based Software Options
Palm Convenience Package
™
(Axcess File Management and WaveWriter software not included)
WaveWriter Wave Shaping
™
(required Palm Handheld not included)
#195 517 Includes a compatible Palm handheld
loaded with Service Pak software and a Palm™ serial
cable that connects the Palm and Axcess®.
™
#195 250 (Includes Palm™ serial cable and
expansion card)
Note: Palm model may vary and Axcess File Management
and WaveWriter software are sold separately.
Axcess File Management
®
(required Palm Handheld not included)
#195 249 Includes Palm™ serial cable and
expansion card.
Simply put, the new Miller (Palm™ OS-based) file
management software turns a standard handheld
(PDA) into a data card and a remote pendant control
for all Axcess systems. This is in addition to all other
functions a handheld is typically used for. By using a
handheld in this manner, we have built a powerful
intuitive interface on a common affordable, portable platform. This opens the door to functions and
capabilities not previously available from Miller or from the welding industry as a whole.
With Miller’s Axcess File Management installed on your Palm OS handheld you can:
E-mail Axcess files anywhere worldwide
Configure any Axcess system as desired
Configure multiple Axcess systems exactly
the same or any way you choose
Save and store Axcess files
Transfer Axcess files to computers
Transfer Axcess files from machine to machine
Backup Axcess files and programs
Set-up and modify Axcess welding sequences
Adjust and store welding program
Locks & Limits for restricting or limiting
operator “Axcess” to programs
Enable Auto-Thread™ feature to program
torch length into Axcess memory. When a
combination of purge and jog (or jog and
retract) are depressed, the Axcess feeding
system delivers exact programmed length of
wire. Great for troubleshooting wire feed
speed and loading wire into the system.
There are 3 basic types of files:
1) Programs – Contain all the welding data that create an arc: volts, amps, wire feed rates, wire type,
size, gas and appropriate arc control. They also contain all the time-based functions typically used
in welding: pre-flow, start conditions, ramps, crater fill, retract, and post-flow.
2) Configuration – Files contain Locks, Errors and Feeder information that include robot selection
type (Robot Control – PS Wire and Gas, Shared Control – Arc On-Analog, and Power Source
Control – Arc On-No Analog). Configuration enables error messages, dual schedule, and remote
program select to be selected. It also allows for checking software revisions and arc/ cycle time
data. Using configuration you can set Auto-Thread™ torch length allowing for pushbutton feed of
an exact wire length.
3) Back-up – Back-up files allow a convenient and simple way to store all files from a welding power
source in a Palm handheld.
WaveWriter is our premium Palm software
package for Axcess systems. For Palm
handhelds, it includes all of the Palm Axcess
File Management functions plus a simple,
pulsed MIG wave-shaping program for the
most demanding pulsed MIG applications.
Customers can expect exceptional welding
performance from any Axcess system from
the programs for common wire and gas
combinations — right out of the box. For
those who need to adjust pulse parameters
for special situations or to achieve a specific
result, WaveWriter will allow anyone to alter
a factory program for a specific wire, gas
or weld joint configuration. Many welding
engineers may find this tool useful in
developing their own unique competitive
advantage and having their own proprietary
weld programs.
With WaveWriter it is possible to change
parameters while welding and immediately
see the effect of the change in the arc.
Real-time feedback helps in understanding
the effect of changing the sometimes
confusing pulse wave form variables
(such as pulse peak, pulse width,
background, and rise and fall rates)
which saves enormous expense and time
in welding procedure development. Most of
the essential variables required for process
and procedure development are not only
precisely controllable and stored, but the
upper and lower control limits can be
established to assure shop floor control.
Each type can reside or be “Axcess”ed in any of 3 locations:
1) Welder – The welding power source holds the main library of welding programs.
2) Handheld – The handheld acts as an interim storage device where files can be pulled from the
power source stored or modified.
3) E-mail – Files can be stored for Email in this location.
Any of the files can be cut, copied, pasted, modified, UN-protected files can also be beamed through
IR port. Copyright-protected and Miller proprietary files cannot be transferred such as Palm Axcess
File Management, WaveWriter™, and RMD™ welding process.
Learn More at MillerWelds.com/AMS
9
Genuine Miller Accessories
DeviceNet Interconnecting Feeder
Control Cables
#195 240 5 ft (1.5 m)
#195 241 10 ft (3 m)
#195 242 25 ft (7.6 m)
#195 243 50 ft (15.2 m)
These specially designed EMI (Electrical
Magnetic Interference) protected and shielded
feeder control cables are required, but not
included with Axcess feeders or ROI. Determine
length needed and order separately.
Wire Reel Assembly
#108 008
Spool Covers
#057 607
Motor Control Cables
#300 097 20 ft (6.1 m)
#300 096 30 ft (9 m)
#300 098 50 ft (15.2 m)
Includes overmolded connections on high-flex
cables for optimal service life.
Axcess® Feeder
Base and
Spool Support
#195 369
Sheet metal
construction.
Allows mounting
Shown
of AA-40GB
with AA-40GB.
motor (if desired)
when using ROI option or when using an AutoAxcess with Smart Cable adapter.
Spindle
Support
Reel Covers #058 256
For 60 lb (27 kg) coil. Helps to protect the welding
wire from dust and other contaminants.
Note: Reel and Spool Covers cannot be installed if
the wire drive assembly is in a rotated position.
Hanging Bail (Electrically Isolated)
#058 435
Used for suspending feeder over work area.
Helps reduce the cast in wire to improve wire
feeding performance and increase the service
life of the gun liner and contact tip.
Dual Schedule Switches
10
Coolmate 3
Coolmate 4
Coolmate™ 3
#043 007 115 VAC
#043 008 230 VAC
For use with water-cooled torches rated up to
600 amps. Unique paddle-wheel indicator,
external filter and easy-fill spout.
Coolmate™ V3 #043 009 115 VAC
For use with water-cooled torches rated up to
500 amps. Vertical design conveniently mounts
to Miller cylinder rack in place of one cylinder.
Wire Straightener
#141 580
For .035 –.045 in (0.9 –1.1 mm) dia. wire.
#141 581
For 1/16 –1/8 in (1.6 – 3.2 mm) dia. wire.
Note: Dual feeder not recommended for this cart. For
dual feeders we recommend using a separate feeder
cart (not available).
Coolmate V3
Turntable Assembly #146 236
Allows rotation of the feeder as the operator
changes work positions. Reduces strain and
bending on the gun cable.
Spindle Support
#092 989
MIGRunner™ XL Cart #195 246
Dimensions: 46-1/2 x W: 42 x D: 35 in
Wide cart with motorcycle-type handle grips.
Holds two large gas cylinders and Coolmate™ 3
(when power source is mounted with face
toward handles) for water-cooled torches. Power
supply can be mounted in several directions
while the feeder can be mounted on the top tray.
Fits Axcess 300 and 450 models only.
Coolant Systems
For more information, see the Miller Coolant
Systems literature sheet, Index No. AY/7.2.
Hub and Spindle
Assembly
#072 094
Hub and
Spindle
Assembly
DSS-9M
#041 793
A 15 ft,
two-position
slide switch
which attaches to the gun handle and is used to
select the desired welding condition for dual
schedule purposes. The gun trigger operates as
a standard trigger.
Coolmate™ 4 #042 288 115 VAC
For use with water-cooled torches rated up to
600 amps. Tough molded polyethylene case
with carrying handle.
Low Conductivity Coolant #043 810
Sold in cases of four 1-gallon recyclable plastic
bottles. Miller coolants contain a base of
ethylene glycol and deionized water to protect
against freezing to -37˚F (-38˚C) or boiling to
227˚F (108˚C). Also contains a compound that
resists algae growth.
DSS-8
#079 693
A 15 ft,
two-position
trigger switch which attaches to the gun handle
and is used in place of the standard trigger for
dual scheduling.
Adapter Cord #157 364
Required for use with DSS-8. 1ft, Y trigger
cable that connects DSS switch and control box
to the gun.
Learn More at MillerWelds.com/AMS
Drive Roll Kits
(Order from Miller Service Parts.)
Select drive roll kits from chart below according to type and wire size being used. Drive roll kits include 4 drive rolls, the necessary guides and feature an
anti-wear sleeve for the inlet guide.
Wire size
“V” groove
for hard wire
“U” groove for
soft wire or
soft-shelled
cored wires
“V” knurled
for hard-shelled
cored wires
“U” cogged for
extremely soft
wire or softshelled cored
wires (i.e., hard
facing types)
.035 in (0.9 mm)
#151 026
#151 036
#151 052
—
.040 in (1.0 mm)
#161 190
—
—
—
.045 in (1.1/1.2 mm)
#151 027
#151 037*
#151 053
#151 070
.052 in (1.3/1.4 mm)
#151 028
#151 038
#151 054
#151 071
1/16 in (1.6 mm)
#151 029
#151 039
#151 055
#151 072
.068/.072 in (1.8 mm)
—
—
#151 056
—
5/64 in (2.0 mm)
—
#151 040
#151 057
#151 073
3/32 in (2.4 mm)
—
#151 041
#151 058
#151 074
7/64 in (2.8 mm)
—
#151 042
#151 059
#151 075
1/8 in (3.2 mm)
—
#151 043
#151 060
#151 076
*Accommodates .045 and .047 (3/64 in) wire.
Nylon Wire Guides for Feeding Aluminum Wire
Wire Guides
Wire size
.047 (3/64) in (1.2 mm)*
Inlet Guide
#151 203
Intermediate Guide
#151 204
Wire size
.023 – .040 in (0.6 – 1.0 mm)
Inlet Guide
#150 993
Intermediate Guide
#149 518
1/16 in (1.6 mm)
#151 205
#151 206
.045 – .052 in (1.1 – 1.4 mm)
#150 994
#149 519
3/32 in (2.4 mm)
#151 207
#151 208
1/16 – 5/64 in (1.6 – 2.0 mm)
#150 995
#149 520
1/16 – 5/64 in (2.4 – 2.8 mm)
#150 996
#149 521
1/8 in (3.2 mm)
#150 997
#149 522
Note: “U groove” drive rolls are recommended when feeding aluminum wire.
*Pushing .047 (3/64) in (1.2 mm) wire is not recommended in torches
greater than 10 ft in length.
Genuine Miller Services and Accessories
Consulting Services
Field Application Support #195 480
Auto-Axcess systems may require factorytrained technical support depending on
the complexity of the application and the
local availability and capability of qualified
welding engineers or robotic experts.
You should contact the factory if there
are questions. Factory support is available
at a flat rate of $1250.00 per day plus
expenses when planned and ordered
more than 10 days in advance. Rates and
availability of our technical specialists with
less than 10 day notice are considerably
more. Rates are based on a 10-hour day
including travel. One day minimum.
Service and Troubleshooting
Analog Robot Simulator #195 030
Device simulates the analog commands
of typical robots. it can be used as a
diagnostic tool to determine power source
functionality and isolate robot, power
source or cable issues.
Learn More at MillerWelds.com/AMS
(For robotic/automation applications only.)
Fanuc Internal Wiring Kit #300 229
Includes 30 ft cable that connects to the Fanuc
controller, and 22 in connector for mounting the
wire drive assembly on top of the robot arm.
Receptacle/Adapter Kits
#194 793 ABB
#194 791 Fanuc
#194 790 Motoman
#300 056 Panasonic
#195 002 Universal
One required per machine. For analog
communication with robot controls via 72-pin
Harting connector on Auto-Axcess. 1-ft length.
Smart Adapter #300 012
Allows Auto-Axcess to be configured to function
as semi-automatic. To be used when there is a
desire to have a common power supply and motor
in both robotic and semi-automatic application.
Easy asset management. 21-ft trigger control
cable is included.
Universal Connector for Analog Control #195 002
Includes mating Harting connector with pins to
allow custom configuration for robotic and fixed
automation applications.
Fanuc/Motoman Wire Drive Motor Assembly
Mounting Bracket #300 013
Shell Connector #194 847
For use by anyone wishing to interface
peripherals, but not wanting to source the
appropriate female amphenol connector.
Coolant Flow
Switch #195 461
To ensure coolant
is flowing in the
system. Lack of
coolant flow may
cause damage to water-cooled guns. Module
allows wiring into the peripheral connector
port. 50 ft (15.2 m) cable with connector and
separate shell connector for simple modification
to desired length in the field. It can be mounted
on the Auto-Axcess or as desired elsewhere.
1/4-turn quick connection.
Fixed or Hard Automation Accessories
Oscillators and Motorized Cross Slides
Refer to Lit. Index No. AU/6.0.
Welding Guns — see www.bernardwelds.com
11
Ordering Information
Semi-Automatic Equipment Options
Learn More at MillerWelds.com/AMS
Stock No.
Description
Qty.
Price
Axcess® 300
#907 150
Power source only
#907 150-01-1 Power source with RMD™ software upgrade
Axcess® 450
#907 152
Power source only
#907 152-01-1 Power source with RMD™ software upgrade
Axcess® 675
#907 154
Power source
#951 038
Power source, bench feeder and 5 ft cable
Axcess® 300 Packages
#951 039
Power source with RMD™ software upgrade, bench feeder and 5 ft cable
#951 031
Power source, bench feeder and 5 ft cable
Axcess® 450 Packages
#951 037
Power source with RMD™ software upgrade, bench feeder and 5 ft cable
Note: Other power sources are available. Consult factory at 1-920-954-3813 for power sources with E-Stop option.
Wire Feeder Options (see page 6)
Axcess® Single Feeder
Axcess® Dual Feeder
#195 182
#195 325
Bench/skid feeder — order DeviceNet Interconnecting Feeder Control Cable separately
Bench/skid feeder — order DeviceNet Interconnecting Feeder Control Cable separately
ROI Options (see page 7)
Single ROI
Dual ROI
Auto ROI (see note above)
#195 238
#195 433
#195 239
Axcess® ROI Swingarc™ Boom
Dual Swingarc™ Retrofit Kit
#300 032
See page 6 for connection diagram and required cables
See page 6 for connection diagram and required cables
See page 6 for connection diagram and required cables.
Requires power source with E-Stop option — consult factory at 1-920-954-3813
See page 7 for various models
Required when replacing motors on older Dual 60 Series Swingarc booms
Wire Drive Assembly Opt. (see page 7)
AA-40GB Wire Drive Motor Assembly
New-style wire drive assembly. See page 6 for connection diagram and required cables
Control Cables (see page 10)
See page 6 for connection diagram and required cables
Automatic Equipment Options*
Auto-Axcess® 300
(Robotic receptacle kit sold separately)
Auto-Axcess® 450
(Robotic receptacle kit sold separately)
Auto-Axcess® 675
#907 151
#907 151-01-1
#907 153
#907 153-01-1
#907 155
Motor/Kit/Cable Options
Wire Drive Motor Assembly
Motor Control Cable (see page 10)
Receptacle/Adapter Kits
190 – 630 V. Inverter power supply with robotic interface
190 – 630 V. Inverter power supply, robotic interface, and RMD software upgrade
190 – 630 V. Inverter power supply with robotic interface
190 – 630 V. Inverter power supply, robotic interface, and RMD software upgrade
190 – 630 V. Inverter power supply with robotic interface
See page 8
See page 8 for connection diagram and required cables
See page 11. One required per machine, consult factory
Palm OS® Based Software Options
Palm™ Convenience Package
Axcess® File Management
WaveWriter ™ Wave Shaping
#195 517
#195 249
#195 250
Palm model may vary (File Management and WaveWriter software NOT included)
File management software (required Palm™ handheld NOT included)
File management software with wave shaping (required Palm™ handheld NOT included)
Software-Based Welding Process Opt.
RMD™ (Regulated Metal Deposition)
#195 252
Field (required Palm™ handheld NOT included)
#195 369
#072 094
#092 989
#195 246
Allows mounting of AA-40GB motor when using ROI option
#300 012
#195 002
#195 480
#195 030
Robotic/automation. Allows automatic to function as semi-automatic
Robotic/automation. Allows custom configuration
Robotic/automation. One day minimum, not subject to discount. See page 11
Robotic/automation. See page 11
Accessories
Axcess® Feeder Base and Spool Support
Hub and Spindle Assembly
Spindle Support
MIGRunner™ XL Cart
Coolant Systems
Drive Roll Kit (Required)
Inlet/Intermediate Guides
Smart Adapter
Universal Connector for Analog Control
Field Application Support
Analog Robot Simulator
Holds two cylinders, cooler, machine and feeder
See page 10
See page 11
See page 11
Date:
*The Axcess is a fully digital machine and utilizes DeviceNet protocol for internal system operation. Select robot manufacturers have created unique software for specific controllers which enable
them to communicate digitally with an Axcess power supply. Check with your robot supplier of choice to further understand if there are benefits created by them that can reduce complexity, add
value or reduce your total cost of integration and operation. Welding Distributors: you may also inquire with the robot manufacturer about drop-ship programs they may offer for digital or analog
versions of the Axcess platform.
Distributed by:
Litho in USA
CP-302
Quick
Specs
Issued May 2007 • Index No. DC/13
MIG Welding
Power Source
Industrial/Heavy Industrial Applications
Processes
Light Fabrication
Automotive
Furniture
Agricultural
Truck Body/Metal Fabrication
Small Equipment Manufacturing
MIG (GMAW)
Flux Cored (FCAW)
Input Power
Rated Output
3-Phase Power
300 A at 32 V, 100% Duty Cycle
390 A at 32 V, 60% Duty Cycle
Max. Open-Circuit Voltage
Weight 332 lb (151 kg)
14 – 44
CP-302 MIGRunner™ comes complete
in one box. See page 4 for details.
The Power of Blue .
®
Adjustable weld stabilizer
(high-low inductance) provides
the flexibility to produce the
optimal arc characteristics. Use
the high stabilizer setting for
stainless steel and low setting for
mild steel and aluminum.
Presettable welding voltage with
voltmeter allows you to easily set
weld output before welding.
Large analog volt and
ammeters for easy viewing.
Power efficient which gives
exceptional value and return
on your investment.
Solid-state weld contactor
provides longevity to match
the ultra-durable and reliable
reputation of the CP series.
Simple control panel with
just one control adjustment.
115 VAC duplex receptacle
provides 15 amps of
auxiliary power.
Lower panel cover protects
output connections from harsh
welding environments.
14-pin receptacle provides
quick, direct connection to
wire feeders and accessories.
Welder is warranted for 3 years, parts and labor. Original main
power rectified parts are warranted for 5 years.
Miller Electric Mfg. Co.
International Headquarters
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
www.MillerWelds.com
Specifications
(Subject to change without notice.)
Rated Output
300 A at 32 V, 100% Duty Cycle
390 A at 32 V, 60% Duty Cycle
Open-Circuit
Voltage
Amps Input at Rated Output, Three-Phase, 60 Hz
200 V 230 V
460 V
575 V
KVA
KW
Dimensions
Net
Weight
14 – 44
38
33
16.5
13.0
13.1
12.3
1.1*
.95*
.48*
.38*
.38*
.32*
H: 30 in (762 mm)
including lift eye
W: 23 in (585 mm)
D: 30-1/2 in (775 mm)
including strain relief
332 lb
(151 kg)
Conforms with NEMA EW 1, “Electric Arc Welding Power Sources”, Class I (100).
*While idling.
Certified to both the Canadian and U.S. Standards for welding equipment.
Control Panel
1
3
4
1. Ammeter
2. Voltmeter
3. Power Switch
4. Pilot Light
5. Preset Indicator Light
6. Voltage Control
2
5
6
Performance Data
VOLT/AMP CURVE
DUTY CYCLE CHART
1000
50
800
40
CP-302 MAX
500
CP-302
400
DC VOLTS
WELDING AMPS
600
300
250
20
200
CP-302 MIN
10
150
100
0
10
2
30
15
20
25
30
40
50
60
100
0
50
100
150
200
250
300
350
400
100
Genuine Miller Accessories
Industrial MIG Kit #195 197
Includes 15 ft (4.6 m), 2/0 power cable and
work lead with clamp, regulator/flow meter
with 15 ft (4.6 m) gas hose, 15 ft (4.6 m)
MIG gun and consumable kit.
Standard Running Gear #042 886
The large 10 in (254 mm) rear wheels and
5 in (127 mm) front casters on this running
gear provide excellent mobility on the shop
floor, making it easier to move the power
source. Very easy to install. Handles double
as weld cable holder.
Standard Cylinder Rack #042 887
Holds two cylinders. Only installs on
Standard Running Gear.
Wire Feeders
70 Series
Single Wire Model
S-74S #195 057
Dual Wire Model
D-74S #195 060
Heavy-duty, industrial, constant-speed
24 VAC semiautomatic wire feeders in
single and dual models, with available
digital meters. Ideal for high-duty-cycle
MIG welding (GMAW) and Flux Cored
welding (FCAW). Accommodates a wide
variety of wire sizes and types. Comes with
FREE Bernard® Q™-Gun! Dual wire feeder
model includes two FREE Q-Guns. See Lit.
Index No. M/3.0.
Extension Cables for 14-Pin Plugs
to 14-Pin Sockets
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)
Spoolmatic® 30A #130 831
A 1-lb, air-cooled spool gun that extends
the weld process range by adding a handy
portable system for small wire MIG. Rated
200 A at 100% duty cycle. Includes 30 ft
(9.1 m) cable assembly. (WC-24 #137 549
for 14-pin.)
WC-24 Weld Control
#137 549
Packaged in a compact,
lightweight, non-metallic
enclosure, the WC-24
easily mounts directly
on the power source.
It’s designed for use with Miller CV power
sources supplying 24 VAC and 14-pin
receptacles. The control includes a boardmounted potentiometer which can alter the
drive motor acceleration rate to optimize
arc starting performance.
22A #193 066
Lightweight, 24 VAC constant-speed semiautomatic wire feeder, best suited for small
diameter wires. Accommodates up to a
60 lb (27.2 kg) spool of welding wire
when using optional wire reel assembly.
Comes with FREE Bernard® Q™-Gun!
See Lit. Index No. M/11.0.
3
CP-302 MIGRunner Components
CP-302 MIGRunner ™
#907 050 200/230/460 V
#907 073 575 V
Comes Complete With:
CP-302 power source
22A wire feeder
Bernard® Q™-Gun 15 ft (4.6 m)
.035/.045 in contact tips
.035/.045 in reversible drive rolls
Regulator/flow gauge with gas hose
Work cable and power cord
Factory-installed running gear/
cylinder rack
Ordering Information
Equipment and Options
Stock No.
Description
CP-302
#903 786
#903 521
200/230/460 V, 60 Hz
575 V, 60 Hz
Qty.
CP-302 MIGRunner
#907 050
200/230/460 V, 60 Hz. See above for package components
22A
#193 066
See Lit. Index No. M/11.0
70 Series
#195 057
#195 060
S-74S. See Lit. Index No. M/3.0
D-74S. See Lit. Index No. M/3.0
Extension Cables for
14-Pin Plugs to 14-Pin Sockets
#122 973
#122 974
#122 975
25 ft (7.6 m)
50 ft (15.2 m)
75 ft (22.8 m)
Spoolmatic® 30A
#130 831
1-lb air-cooled spool gun, 200 A at 100% duty cycle, includes 30 ft (9.1 m) cable assembly
WC-24 Weld Control
#137 549
Wire Feeders
Guns
Bernard® Gun
Consumables
Accessories
Industrial MIG Kit
#195 197
Standard Running Gear
#042 886
Standard Cylinder Rack
#042 887
Includes 15 ft (4.6 m), 2/0 power cable and work lead with clamp, regulator/flow meter
with 15 ft (4.6 m) gas hose, 15 ft (4.6 m) MIG gun and consumable kit
Date:
Total Quoted Price:
Distributed by:
Litho in USA
Price
Delta-Fab System
Industrial Applications
Delta-Fab
Input Power
Rated Output
Heavy-to-Light Fabrication
Quick
Specs
Processes
3-Phase, 230/460/575 V
375 A at 100% Duty Cycle
450 A at 60% Duty Cycle
MIG (GMAW)
with mild steel, flux cored,
stainless steel, and
aluminum wires
Voltage 10 – 45 V
Weight 374 lb (170 kg)
Issued January 2006 • Index No. DC/15
MIG Welding
Power Source
24A Wire Feeder
Input Power 24 VAC / 7 A
Electrode Wire Diameter Capacity
.023– 3/32 in (0.08 – 2.4 mm)
Wire Speed 75 – 750 IPM (1.9 – 16.5 m/min)
Remote Voltage Control Standard
Weight 40 lb (18 kg)
The Power of Blue .
®
Run-in standard on 24A for better
arc-starting performance on a variety
of wires.
Four-Drive-Roll feeding system with
independent tension control handles
small and large diameter wires. (Drive
rolls and guides ordered separately.)
Remote voltage control is standard.
Parameter adjustments can be made
in weld cell or at a remote location.
Adjustable material output studs
provide the flexibility to produce
the optimal arc characteristics for
aluminum, stainless steel and all
other materials.
Large analog volt and
ammeters for easy viewing.
14-pin receptacle provides
quick, direct connection to
wire feeders and accessories.
Solid-state weld contactor provides
longevity to match the ultra-durable
and reliable reputation of the Delta-Fab.
115 VAC duplex receptacle
provides 15 amps of
auxiliary power.
Large output voltage range provides
more flexibility on a variety of wire
diameters. Also aids operator with
voltage losses that occur when
operating long distances from
power source.
Shown with Bernard®
Q-400 15 ft MIG gun.
14-pin select is easy to set
up with no external switches
to put in the wrong position.
Welder is warranted for 3 years, parts and labor. Original
main power rectified parts are warranted for 5 years.
Miller Electric Mfg. Co.
International Headquarters
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
www.MillerWelds.com
Delta-Fab Specifications
Rated Welding Output
Voltage Range DC
375 A at 35 VDC,
100% Duty Cycle
10 – 45
(Subject to change without notice.)
Amps Input at Rated Load Output, 60 Hz, Three-Phase
230 V
460 V
575 V
KVA
KW
69
4*
34.5
2*
27.5
1.6*
27.5
1.61*
Net
Weight
Dimensions
17.5
0.46*
H: 30 in (762 mm)
(including lift eye)
W: 23 in (585 mm)
D: 30-1/2 in (775 mm)
(including strain relief)
374 lb
(170 kg)
*While idling.
Certified to both the Canadian and U.S. Standards for welding equipment.
24A Wire Feeder Specifications
(Use with CV
Power Sources.)
(Subject to change without notice.)
Input Power
Electrode Wire
Diameter Capacity
Maximum Spool
Size Capacity
24 VAC, 7 A, 60 Hz
.023– 3/32 in (0.08 – 2.4 mm)
60 lb (27.2 kg)
Wire Speed
Dimensions
Net Weight
75 – 750 IPM
(1.9 – 16.5 m/min)
H: 11 in (279 mm)
W: 10-3/4 in (273 mm)
D: 23-1/2 in (597 mm)
40 lb (18 kg)
Conforms to European standards.
Control Panels
1
1
2
3
3
4
High Temp
Shutdown
4
ON
2
5
6
OFF
Delta-Fab
MADE IN
MILLER ELECTRIC MFG. CO., APPLETON, WI.
CV Welding Power Source
1. Voltage/Wire Speed Meter*
2. Voltage/Wire Speed Switch*
3. Remote Voltage Control Standard
4. Wire Speed Control
5. Jog/Purge Switch
6. Trigger Hold Switch
1. Voltage Meter
2. High Temperature Shutdown Light
3. Amperage Meter
4. Power Switch with Indicator Light
Note: Weld output studs are energized by controls on the wirefeeder.
Turn off power before connecting remote device.
*Optional
Note: Power switch is on rear panel.
Performance Data
VOLT/AMP CURVE – DELTA-FAB
DUTY CYCLE CHART – DELTA-FAB
60
1000
800
50
MAX
500
40
400
DC VOLTS
WELDING AMPS
600
300
250
20
200
150
10
MIN
100
0
10
15
20
25
30
40
% DUTY CYCLE
2
30
50
60 70 80 90 100
0
100
200
300
400
DC AMPS
500
600
700
800
Drive Roll Kits Select drive roll kits from chart below according to type and wire size being used. Kit includes (4) drive rolls and inlet guide.
Wire size
.023/.025 in (0.6 mm)
.030 in (0.8 mm)
.035 in (0.9 mm)
.040 in (1.0 mm)
.045 in (1.1/1.2 mm)
.052 in (1.3/1.4 mm)
1/16 in (1.6 mm)
.068/.072 in (1.8 mm)
5/64 in (2.0 mm)
3/32 in (2.4 mm)
“U” groove for
soft wire or
soft-shelled
cored wires
“V” groove
for hard wire
#087 132
#046 780
#046 781
#191 917
#046 782
#046 783
#046 784
“V” knurled
for hard-shelled
cored wires
“U” cogged for extremely
soft wire or soft-shelled
cored wires (i.e., hard
facing types)
—
—
—
—
#083 319
#083 320
#046 800
—
#046 801
#046 802
—
—
#046 792
—
#046 793
#046 794
#046 795
#089 985
#046 796
#046 797
—
—
#044 750
—
#046 785
#046 786
#046 787
—
#046 788
#046 789
*Accommodates 3/64 in (.045 and .047 mm) wires.
Nylon Wire Guides for Feeding Aluminum Wire
Wire Size
Inlet Guide
Intermediate Guide
.047 in (1.2 mm)
1/16 in (1.6 mm)
3/32 in (2.4 mm)
#151 203
#151 205
#151 207
#058 837
#058 853
#058 841
Note: “U” groove drive rolls
are recommended when
feeding aluminum wire.
Genuine Miller Options
Digital Meter #186 498 Field
Dual-function, back-lit LCD digital meter
with selector switch. The digital meter
allows the wire feed speed to be preset in
meters per minute or inches per minute.
The voltage function will only monitor and
display the arc voltage. The voltage display
can also be calibrated if required.
Preflow/Postflow and Spot Control
#186 496 Field
Installs inside feeder under an easy access
hinged cover. Provides up to 5 seconds of
spot weld time and has adjustable timers
(0.25 to 5 sec.) for controlling gas flow
prior to arc initiation and after completion
of weld.
Genuine Miller Accessories
Standard Cylinder Rack #042 887
Holds two cylinders. Only installs on
Standard Running Gear.
Wire Reel Assembly #108 008
For 60 lb (27 kg) coil of wire.
(Cannot use when handle is installed.)
Carrying
Handle
Wire Reel Assembly
Standard Running Gear #042 886
The large 10 in (254 mm) rear wheels and
5 in (127 mm) front casters on this running
gear provide excellent mobility on the shop
floor, making it easier to move the power
source. Very easy to install. Handles double
as weld cable holder.
Turntable
Assembly
Turntable Assembly #146 236
Allows rotation of the feeder as the operator
changes work positions. Reduces strain
and bending on the gun cable.
Feeder Cart
Feeder Cart #043 698 Field
A low-profile creeper cart with high-quality
rubber casters, front swivel and rear rigid.
3
Genuine Miller Accessories
Carrying Handle #193 762
For lifting and moving feeder.
(Continued)
Hanging Bail #058 435
Suspends feeder over the work area.
Reel Cover #058 256
For 60 lb (27.2 kg) coil.
Hanging Bail
Extension Cords
#122 973 25 ft (7.6 m)
#122 974 50 ft (15 m)
#122 975 75 ft (23 m)
Used to extend interconnecting cords.
Spool Adapter #047 141
For use with 14 lb (6.4 kg) spool
of Lincoln self-shielding wire.
Spool Cover
Spool Cover #057 607
For 12 in (304 mm) spool.
Ordering Information
Equipment and Options
Stock No.
Description
Delta-Fab System
#951 022
375 A at 35 VDC, 100% Duty Cycle, 60Hz, Three-Phase
with 24A Four-drive-roll wire feeder
Digital Meter
#186 498
Field
Preflow/Postflow and Spot Control
#186 496
Field
Drive Roll Kit
Qty.
See Drive Roll Kits table (page 3)
Accessories
Standard Running Gear
#042 886
Standard Cylinder Rack
#042 887
Wire Reel Assembly
#108 008
For 60 lb (27.2 kg) coil
Feeder Cart
#043 698
Field
Carrying Handle
#193 762
Turntable Assembly
#146 236
Hanging Bail
#058 435
Spool Cover
#057 607
For 12 in ( 304 mm) spool
Reel Cover
#058 256
For 60 lb (27.2 kg) coil
Spool Adapter
#047 141
For 14 lb (6.4 kg) Lincoln spool
Extension Cords
#122 973
#122 974
#122 975
25 ft (7.6 m)
50 ft (15 m)
75 ft (23 m)
Date:
Total Quoted Price:
Distributed by:
Litho in USA
Price
Deltaweld Series
Issued May 2007 • Index No. DC/16.2
®
Quick
Specs
MIG Welding
Power Source
Heavy Industrial Applications
Processes
Input Power
Heavy Equipment Manufacturing
Truck and Trailer Manufacturing
Ship and Boat Building
Tank/Pressure Vessel Fabrication
Manufacture of Automotive Equipment
Railcar/Locomotive Fabrication and Repair
Furniture Manufacture
Structural Steel Fabrication
Sheet Metal Fabrication
Maintenance
MIG (GMAW)
Flux Cored (FCAW)
Air Carbon Arc (CAC-A)
Cutting and Gouging
Submerged Arc (SAW)
302/402: 3-Phase Power
452/602: 3-Phase Power
652/852: 3-Phase Power
Rated Output
302/402: 300 A at 32 VDC, 100% Duty Cycle
452/602: 450 A at 38 VDC, 100% Duty Cycle
652/852: 650 A at 44 VDC, 100% Duty Cycle
Weight
302/402: 323 lb (147 kg)
452/602: 384 lb (174 kg)
652/852: 472 lb (214 kg)
The Power of Blue .
®
Remote on/off capabilities allow
operator to turn power source
on/off from a distance.
Superior arc welding performance
with MIG welding.
Internal digital voltage control
(DVC) enables operator to preset
weld voltage before striking an arc.
Remote voltage control allows
operator to change voltage from
feeder.
Two positive output terminals
provide high/low stabilizer selection.
Allows operator to optimize arc
performance.
Power efficient for exceptional value
and return on your investment.
Fan-On-Demand™ operates only
when needed reducing noise, power
consumption, and the amount of
airborne contaminants pulled
through the machine.
Line voltage compensation ensures
consistent weld performance by
keeping output power constant even if
primary input power varies by ±10%.
Enclosed circuit boards provide
additional protection from
contaminants resulting in longer
service life.
Simple control panel provides
easy, efficient operation.
Digital voltmeter and ammeter are
easy to read, even at 30 ft (9.2 m).
14-pin receptacle provides quick,
direct connection to Miller 14-pin
wire feeders and accessories.
115 V duplex receptacle provides
15 amps of auxiliary power.
Deltaweld 452/602
Thermal overload protection light indicates
power shutdown. Helps prevent machine damage
if the duty cycle is exceeded or airflow is blocked.
PC board protection prevents the
wire feeder power or other stray
voltages (less than 115 VAC) from
harming the power source PC board.
Power cord strain relief provided
for your convenience at installation.
Power source is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Miller Electric Mfg. Co.
International Headquarters
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
www.MillerWelds.com
®
Deltaweld 302/402 Specifications
Rated Output
300 A at 32 VDC,
100% Duty Cycle
Voltage
Range
Max. OpenRecommended Circuit
Welding Range Voltage
10–32 V
15 – 32 V
44 VDC
(Subject to change without notice.)
Amps Input at Rated Output, 50/60 Hz
200 V 230 V 380 V 400 V 440 V 460 V 575 V KVA KW
48
42
27
25
23
21
17
16.9 12.9
Net
Weight
Dimensions
H: 30 in (762 mm)
including lift eye
W: 23 in (585 mm)
D: 30-1/2 in (775 mm)
including strain relief
Note: For input conductor and fuse size information consult the Owner’s Manual.
Certified to both the Canadian and U.S. Standards for welding equipment.
Control Panel
1
4
2
5
3
6
1. Voltage Adjustment Control
2. Output Switch
3. Remote Voltage Control Switch
4. Digital Meters
5. Power Switch with Indicator Light
6. High Temperature Shutdown Light
Performance Data
DUTY CYCLE CHART
VOLT/AMP CURVE CV
RATED OUTPUT
600
80
GMAW
FCAW
70
60
DC VOLTS
WELDING AMPS
500
400
300
50
40
MAX.
30
MED.
20
MIN.
10
200
40
50
60
70
% DUTY CYCLE
2
80
90 100
0
0
50
100
150
DC AMPS
200
250
300
323 lb
(147 kg)
®
Deltaweld 452/602 Specifications
Rated Output
450 A at 38 VDC,
100% Duty Cycle
Voltage
Range
Max. OpenRecommended Circuit
Welding Range Voltage
10 – 38 V
15 – 38 V
(Subject to change without notice.)
Amps Input at Rated Output, 50/60 Hz
200 V 230 V 380 V 400 V 440 V 460 V 575 V KVA KW
44 VDC
72
63
39
37
33
32
25
25.1 21.1
Net
Weight
Dimensions
H: 30 in (762 mm)
including lift eye
W: 23 in (585 mm)
D: 38 in (966 mm)
including strain relief
384 lb
(174 kg)
Note: For input conductor and fuse size information consult the Owner’s Manual.
Certified to both the Canadian and U.S. Standards for welding equipment.
50 Hz models with CE Specifications are manufactured according to the Standards IEC-974-1 and EN-60974-1.
Control Panel
1
4
2
5
3
6
1. Voltage Adjustment Control
2. Output Switch
3. Remote Voltage Control Switch
4. Digital Meters
5. Power Switch with Indicator Light
6. High Temperature Shutdown Light
Performance Data
DUTY CYCLE CHART
VOLT/AMP CURVE CV
RATED OUTPUT
800
80
GMAW
FCAW
70
60
DC VOLTS
WELDING AMPS
600
400
300
50
MAX.
40
MED.
30
20
MIN.
10
200
40
0
50
60
70
% DUTY CYCLE
80
90 100
0
100
200
300
400
500
DC AMPS
3
®
Deltaweld 652/852 Specifications
Rated Output
650 A at 44 VDC,
100% Duty Cycle
(Subject to change without notice.)
Voltage
Range
Recommended
Welding Range
Max. OpenCircuit
Voltage
Amps Input at Rated Output, 50/60 Hz
230 V 380 V 400 V 440 V 460 V 575 V KVA
KW
Dimensions
10–44 V
15 – 44 V
33 VDC
96
34.2
H: 30 in (762 mm)
including lift eye
W: 23 in (585 mm)
D: 38 in (966 mm)
including strain relief
58
54
50
48
38
38.2
Net
Weight
472 lb
(214 kg)
Note: For input conductor and fuse size information consult the Owner’s Manual.
Certified to both the Canadian and U.S. Standards for welding equipment.
50 Hz models with CE Specifications are manufactured according to the Standards IEC-974-1 and EN-60974-1.
Control Panel
1
4
2
5
3
6
1. Voltage Adjustment Control
2. Output Switch
3. Remote Voltage Control Switch
4. Digital Meters
5. Power Switch with Indicator Light
6. High Temperature Shutdown Light
Performance Data
DUTY CYCLE CHART
VOLT/AMP CURVE CV
RATED OUTPUT
1000
80
GMAW
FCAW
70
800
600
DC VOLTS
WELDING AMPS
60
50
MAX.
40
MED.
30
20
400
MIN.
10
300
40
0
50
60
70
% DUTY CYCLE
4
80
90
100
0
100
200
300
400
DC AMPS
500
600
700
Genuine Miller Options
Air Filter Kit #042 939 Field
Reusable air filter helps protect internal
components from dust and dirt, reducing
need for maintenance and providing
extended service life. Easily attaches and
detaches from front of the power source.
Ground Current Sensor #195 048 Field
Disables power source if weld current is
present on primary ground.
Genuine Miller Accessories
Water Coolant Systems
For more information, see Miller Coolant
Systems Lit. Index No. AY/7.2.
Coolmate V3
Industrial MIG Kit #195 197
Includes 15 ft (4.6 m), 2/0 power cable and
work lead with clamp, regulator/flow meter
with 15 ft (4.6 m) gas hose, 15 ft (4.6 m)
MIG gun and consumable kit.
Remote On/Off Control #042 869
Allows you to turn power source on or off
from a distance of 20 ft (6 m). This is
especially useful if your power source is
located up in a mezzanine.
Polarity Control #042 871
This dual-function control is designed for
use with dual wire feeders or any application
where electrical isolation and/or polarity
reversing of weld current is required. Both
functions can be used at the same time.
Process Control Selector #042 872
Allows you to easily change weld processes.
Also includes features of Polarity Control.
Coolmate 3
Standard Running Gear #042 886
The large 10 in (254 mm) rear wheels and
5 in (127 mm) front casters on this running
gear provide excellent mobility on the shop
floor, making it easier to move the power
source around and over cables and cracks.
Very easy to install. Handles double as weld
cable holder.
Standard Cylinder Rack #042 887
Holds two cylinders. Only installs on
Standard Running Gear.
Coolmate 4
Coolmate™ 3
#043 007 115 VAC
#043 008 230 VAC
For use with water-cooled torches rated
up to 600 amps. Unique paddle-wheel
indicator, external filter and easy fill spout.
Coolmate™ V3 #043 009 115 VAC
For use with water-cooled torches rated up
to 500 amps. Vertical design conveniently
mounts to Miller cylinder rack in place of
one cylinder.
Coolmate™ 4 #042 288 115 VAC
For use with water-cooled torches rated up
to 600 amps. Tough molded polyethylene
case with carrying handle.
Coolant #043 810
Sold in cases of four 1-gallon recyclable
plastic bottles. Miller coolants contain a
base of ethylene glycol and deionized water
to protect against freezing to -37˚F (-38˚C)
or boiling to 227˚F (108˚C). Also contains
a compound that resists algae growth.
5
Genuine Miller Accessories
(Continued)
Wire Feeders
70 Series
Single Wire Models
S-74S #195 057
S-74D #195 058
S-74D #195 058-01-1 High Speed
S-74DX #195 059
S-74DX #195 059-01-1 High Speed
Dual Wire Models
D-74S #195 060
D-74D #195 061
D-74DX #195 062
Heavy-duty, industrial, constant-speed
24 VAC semiautomatic wire feeders in
single and dual models, with available
digital meters. Ideal for high-duty-cycle
MIG welding (GMAW) and Flux Cored
welding (FCAW). Accommodates a wide
variety of wire sizes and types. Comes with
FREE Bernard® Q™-Gun! Dual wire feeder
models include two FREE Q-Guns. See Lit.
Index No. M/3.0.
22A #193 066
Simple, reliable, 24 VAC constant-speed
semiautomatic wire feeder, best suited for
small diameter wires. Features two geardriven drive rolls for smooth, positive wire
feed. Accommodates up to 60 lb (27.2 kg)
spool of welding wire when using optional
wire reel assembly. Comes with FREE
Bernard® Q™-Gun! See Lit. Index No. M/11.0.
Swingarc™ Boom-Mounted Wire Feeders
Single and dual 24 VAC semiautomatic wire
feeders are available with 12 ft (3.7 m) and
16 ft (4.9 m) booms. Ideal for long reach
and complete maneuverability when
working on large weldments, or in hard-toreach areas. See Lit. Index No. M/13.11.
24A #195 112
Simple, reliable, 24 VAC constant-speed
semiautomatic wire feeder, best suited for
small diameter wires. Remote voltage is
standard. Features four gear-driven drive
rolls for larger wire sizes. Accommodates
up to 60 lb (27.2 kg) spool of welding wire
when using optional wire reel assembly.
Comes with FREE Bernard® Q™-Gun! See
Lit. Index No. M/11.0.
6
XR™-Control #181 538
Push-pull wire feed system offers
unparalleled performance for aluminum
MIG welding. See Lit. Index No. M/1.7.
Extension Cables for 14-Pin Plugs to
14-Pin Sockets
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)
This extension cord makes a direct
connection between the power source and
the accessory control or wire feeder. No
messy splicing or adapting required.
Notes
7
Ordering Information
Equipment and Options
Stock No.
Description
Deltaweld® 302
#903 376*
#903 392*
200-208/230/460 V, 60 Hz
230/460/575 V, 60 Hz
Deltaweld® 402
#907 285
380/400/440 V, 50 Hz w/CE
Deltaweld® 452
#903 377*
#903 394*
200-208/230/460 V, 60 Hz
230/460/575 V, 60 Hz
Deltaweld® 602
#907 286
380/400/440 V, 50 Hz w/CE
Deltaweld® 652
#903 396*
230/460/575 V, 60 Hz
®
Deltaweld 852
#907 287
380/400/440 V, 50 Hz w/CE
Air Filter Kit
#042 939
Field
Ground Current Sensor
#195 048
Field
Qty.
Power Source
Wire Feeders
70 Series
See Lit. Index No. M/3.0
22A
#193 066
24A
#195 112
See Lit. Index No. M/11.0
XR™-Control
#181 538
See Lit. Index No. M/1.7
Swingarc™ Boom Feeders
Extension Cables
See Lit. Index No. M/11.0
See Lit. Index No. M/13.0
#122 973
#122 974
#122 975
25 ft (7.6 m)
50 ft (15.2 m)
75 ft (22.8 m)
Industrial MIG Kit
#195 197
Includes 15 ft (4.6 m), 2/0 power cable and work lead with clamp, regulator/flow
meter with 15 ft (4.6 m) gas hose, 15 ft (4.6 m) MIG gun and consumables kit
Remote On/Off Control
#042 869
Polarity Control
#042 871
Process Control Selector
#042 872
Standard Running Gear
#042 886
Miscellaneous
Standard Cylinder Rack
#042 887
Coolmate™ 3
#043 007
#043 008
115 VAC
230 VAC
Coolmate™ V3
#043 009
115 VAC
Coolmate™ 4
#042 288
115 VAC
Coolant
#043 810
Primary Power Cable
Secondary Welding Cables
Work Cable and Clamp
Date:
*
**
Total Quoted Price:
Certified to both the Canadian and U.S. Standards for welding equipment.
50/60 Hz models with CE Specifications are manufactured according to the Standards IEC-974-1 and EN-60974-1.
Conforms with NEMA EW 1 “Electric Arc Welding Power Source,” Class I (100).
Distributed by:
Litho in USA
Price
Invision 456P
Issued January 2005 • Index No. DC/20
™
Quick
Specs
MIG Welding
Power Source
Heavy Industrial Applications
Processes
Construction
Shipbuilding
Railroad
Manufacturing
Fabrication
Repair Shops
MIG (GMAW)/Pulsed MIG (GMAW-P)*
Flux Cored (FCAW)
Air Carbon Arc Cutting and Gouging
(CAC-A)
Input Power Requires 3-Phase Power
Output Power 10 – 38 V, 5 – 600 A
Weight Net: 118 lb (53.5 kg) Ship: 129 lb (58.5 kg)
The Power of Blue .
®
Primary voltage display saves time
and assures operator that power
source is correctly set for available
input voltage without having to
remove side panels.
Wind Tunnel Technology ™ protects
electrical components and PC
boards from contamination.
Fan-On-Demand™ cooling system
operates only when needed,
reducing noise, energy use and the
amount of contaminants pulled
through machine.
Large, dual digital meters
display both volts and amps for
quick and easy viewing by an
operator. Voltmeter is presettable
for ease of setting weld output.
A hold function lets the operators
view actual welding output when
the arc is broken.
Variable, electronic inductance
control helps to minimize spatter and
optimize weld-bead wetting action.
Lightweight, aerospace-grade
aluminum case offers protection
with the benefit of reduced weight.
85% power efficiency means unit
costs less to operate.
Unique case design protects internal
components from dirt and dust. To
connect power cord and/or set unit
up for correct input power, remove
the easy-to-handle panel (1/3 case).
The remaining two-thirds of the case
never needs to be removed!.
Auto Remote Sense enables unit to
automatically use remote control if
connected to remote control receptacle.
Line voltage compensation keeps
power constant even if power input
varies by ±10%. Ensures consistent
weld performance.
600 A maximum output (450 A at 100% duty cycle)
meets the high output needs of demanding applications.
115 VAC auxiliary power provides 10 A of circuitbreaker-protected power for water circulators, etc.
Remote control circuit protection
prevents damage from high frequency
and shorted control cables.
Optional remote on/off provides
ability to turn the power source on
and off when power source is
located away from your work.
Pulsed MIG capabilities with
optional Optima control reduces
spatter and distortion, allows better
out-of-position puddle control, and
provides potential reduction of fume
particle emission.
Power source is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Miller Electric Mfg. Co.
International Headquarters
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
www.MillerWelds.com
Specifications
Input
Power
Rated Output
ThreePhase
450 A at 38 VDC,
100% Duty Cycle
(Subject to change without notice.)
Voltage
Range in
CV Mode
Amperage
Range in
CC Mode
Max. OpenCircuit
Voltage
Amps Input at Rated Load Output, 60 Hz
230 V 400 V 460 V 575 V KVA KW
10 – 38 V
5 – 600 A
95 VDC
50.8
31
27.8
24.4
21.2 19.2
565 A at 43 VDC,
60% Duty Cycle
Dimensions
Weight
H: 17 in (432 mm)
W: 14-1/2 in (368 mm)
D: 26 in (660 mm)
118 lb
(53.5 kg)
Certified to both the Canadian and U.S. Standards for welding equipment.
Control Panel
Additional Features
1
Primary voltage display shows what primary
voltage the power source is linked for without
removing the side panels. Saves time and
assures you that the power source has been
correctly linked for available input voltage.
5
6
2
3
Unique case design helps protect internal
components from dirt and dust. To connect
input power cord and/or set unit up for correct
input power, remove the easy-to-handle panel
(1/3 case). The remaining two-thirds of the
case never needs to be removed!
4
1. Voltmeter
2. Power On/Off Switch
3. Inductance Control
4. Remote On/Off Receptacle (Optional)
5. Ammeter
6. Voltage Adjustment Control
Optional remote on/off provides ability to turn
power source on or off when it is located away
from your work.
Performance Data
DUTY CYCLE CHART
CV VOLT/AMP CURVES
600
100
500
3-PHASE
OPERATION
300
80
VOLTAGE
WELD AMPS
400
200
60
MAX.
40
150
20
100
0
10
15
20
25
30
40
% DUTY CYCLE
2
50
60
70 80 90 100
0
MIN.
0
100
200
300
400
AMPERAGE
500
600
700
Genuine Miller Accessories
Optima™ #043 389
A multipurpose,
microprocessor-based pulse
control for both synergic
MIG (wire welding or
GMAW) or manual MIG
pulsing. Use this control with
Invision 456 power sources
and any Miller wire feeder, including
automatic feeders and spool guns. Includes
a 25 ft (7.6 m) cord with 14-pin plug.
Extension Cords for Optima
#043 725 25 ft (7.6 m)
#043 726 50 ft (15.2 m)
#043 727 75 ft (22.9 m)
WC-24 Weld Control
#137 549
Designed for use with
Miller CV power sources
supplying 24 VAC and
14-pin receptacles. For
use with Spoolmatic
30A spool gun.
Inverter Racks
Four or Six-Arc Welding System
The Inverter Rack
conveniently houses
multiple power
sources for multiple
welders. Both 4-pack
and 6-pack models
are available.
Features include:
Provision to parallel power sources or
common work connections
Two lifting eyes for transportation
Rugged skids for dragging or pushing
Customer can install up to a maximum
of 4 Invision 456 power sources
For detailed information on customized
Inverter Rack systems see Lit. Index No.
DC/18.81.
Running Gear
MIGRunner ™ XL Cart #195 246
Small footprint and easily maneuverable,
with cylinder rack low enough that you do
not have to lift bottles. Carries two 160 lb
(72.6 kg) gas cylinders, or one gas cylinder
and one coolant system.
RHC-14 Hand Control
#129 340
Miniature hand control
for remote current and
contactor control.
Dimensions: 4 x 4 x
3-1/4 in (102 x 102 x 82 mm). Includes
20 ft (6 m) cord and 14-pin plug.
Extension Cords for Remote Controls
and 24 VAC Wire Feeders
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)
14-pin plug to 14-pin socket.
SuitCase™ 8RC #194 938
SuitCase™ 12RC #194 940
Lightweight, portable wire feeder for a
variety of wires up to .062 in. Holds up to
an 8 in (8RC) or 12 in (12RC) spool of
wire. Operates using 14-pin control
receptacle. See Lit. Index No. M/6.5.
XR-Control #181 538
Push-pull wire feed
system offers unparalleled
performance for aluminum
MIG welding. See Lit.
Index No. M/1.7.
S-74 DX #195 059
Wire feeder features
process and weld
control and handles
a variety of wires up
to 1/8 in. See Lit.
Index No. M/3.0.
WC-115A Weld Control
#137 546-01-1
Operates on 115 VAC
and is designed for
power sources without
a 14-pin receptacle. For
use with Spoolmatic 30A spool gun. Includes
10 ft (3 m) wall-type plug and power cord.
Process Selector Control #042 872
Designed for use with dual wire feeders,
applications where electrical isolation and/or
polarity reversing of weld current is required,
and for welding process changes. Includes
115 VAC/2 amp receptacle, two 14-pin
receptacles and a 10 ft (3 m) 14-pin cord.
Wire Feeders/Guns
Cylinder Cart #042 537
Carries two 160 lb (72.6 kg) gas cylinders,
or one gas cylinder and one coolant system.
Feeder mounts to tray above power source.
60M Series
S-60M #131 794
D-60M #131 796
Semiautomatic
pulsed-MIG and
standard CV-MIG
feeder equipped
with eight synergic pulse programs. Handles
.023 to 1/8 in wires and up to 60 lb spool.
Optional data cards for program storage
and transfer. Pulse arc characteristics are
fully customizable. See Lit. Index No. M/2.4.
Spoolmatic®
30A #130 831
A 1-lb, aircooled spool
gun that extends
the weld process
range by adding a handy portable system
for small wire MIG. Rated 200 A at 100%
duty cycle. Includes 30 ft (9.1 m) cable
assembly. (WC-24 #137 549 for 14 pin.)
Note: Not for use with Optima or 60M Series.
3
Genuine Miller Accessories
(continued)
Water Coolant Systems
Roughneck ® C-Series MIG Guns
See Lit. Index No. AY/17.0.
For more information, see the Miller Coolant
Systems literature sheet, Index No. AY/7.2.
Ironmate™ Flux Cored Guns
See Lit. Index No. AY/16.0.
FC-1260
#195 732 10 ft (3 m)
#195 729 15 ft (4.6 m)
FC-1260LM
#194 912 10 ft (3 m)
#194 911 15 ft (4.6 m)
FC-1150
#194 864 10 ft (3 m)
#194 863 15 ft (4.6 m)
Coolmate™ V3 #043 009 115 VAC
For use with water-cooled torches rated up
to 500 amps. Vertical design conveniently
mounts to Miller cylinder rack in place of
one cylinder.
Coolmate™ 4 #042 288 115 VAC
For use with water-cooled torches rated up
to 600 amps. Tough molded polyethylene
case with carrying handle.
Coolmate™ 3
#043 007 115 VAC
#043 008 230 VAC
For use with water-cooled torches rated up
to 600 amps. Unique paddle-wheel
indicator, external filter and easy-fill spout.
Coolant #043 810
Sold in cases of four 1-gallon recyclable
plastic bottles. Miller coolants contain a
base of ethylene glycol and deionized water
to protect against freezing to -37˚F (-38˚C)
or boiling to 227˚F (108˚C). Also contains a
compound that resists algae growth.
Ordering Information
Power Source and Options
®
Invision 456P
Stock No.
Description
Qty.
#903 505
#903 505-01-1
#903 545
#903 546
230/460 VAC, 60 Hz
230/460 VAC, 60 Hz with Remote On/Off
400 VAC, 50/60 Hz with CE
575 VAC
#043 389
For CC/CV models only
WC-24
#137 549
For use with Spoolmatic 30A and power sources with 14-pin
WC-115A
#137 546-01-1
For use with Spoolmatic 30A and power sources without 14-pin
Process Selector Control
#042 872
Accessories
Optima™ MIG Pulse Control
Optima™ Extension Cords
See page 3
Extension Cords (For 24 VAC wire
feeders and remote controls)
See page 3. Not to be used with Optima or 60M
Running Gear
MIGRunner™ XL Cart
#195 246
For all models
XMT Cylinder Cart
#042 537
For all models
SuitCase™ 8RC / 12RC
#194 938 / #194 940
See Lit. Index No. M/6.5
XR-Control
#181 538
See Lit. Index No. M/1.7
S-74 DX
#195 059
See Lit. Index No. M/3.0
60M Series
#131 794 / #131 796
S-60M / D-60M. See Lit. Index No. M/2.4
Spoolmatic® 30A Spool Gun
#130 831
Includes 30 ft (9.1 m) cable assembly
Wire Feeders/Guns
Roughneck® C-Series MIG Guns
See Lit. Index No. AY/17.0
Ironmate™ Flux Cored Guns
See Lit. Index No. AY/16.0
Water Coolant Systems
See above. See Lit. Index No. AY/7.2
Total Quoted Price:
Date:
Distributed by:
Litho in USA
Price
Invision 354MP/456MP
Issued Aug. 2007 • Index No. DC/23
™
Quick
Specs
Industrial Applications
Processes
Metal Fabrication
Heavy Manufacturing
Construction
Light Manufacturing
MIG (GMAW)
Pulsed MIG (GMAW-P)
Stick (SMAW)
Flux Cored (FCAW)
Air Carbon Arc (CAC-A)
Cutting and Gouging
MIG Welding
Power Source
Input Power
354MP: 3-Phase or 1-Phase Power
456MP: 3-Phase Power
Rated Output
354MP: 300 A at 32 V, 60% Duty Cycle (3-Phase)
225 A at 29 V, 60% Duty Cycle (1-Phase)
456MP: 450 A at 38 V, 100% Duty Cycle (3-Phase)
Weight
The Power of Blue .
®
354MP: 79.5 lb (36.1 kg) 456MP: 118 lb (53.5 kg)
Invision 354MP MIGRunner™ industrial package
comes complete in one box. See page 7 for details.
Wind Tunnel Technology™
protects electrical
components and PC
boards from contamination, significantly
improving reliability.
Dual digital meters for
quick and easy viewing
and large setup screen
to choose pulse welding
mode.
Built-in pulsed MIG
capability which eliminates
pendants and cables that
could potentially get
damaged or lost.
Fan-On-Demand™
operates only when
needed reducing both
noise and power
consumption.
Pulsed spray transfer
helps reduce spatter and
fume levels.
Remote control of
arc trim allows wire
feeder complete control
of arc parameters.
Invision 456MP
International-style weld
disconnects provide high-quality
weld cable connections. (Two
connectors supplied with each
unit. Invision 354MP only.)
Lightweight, aerospacegrade aluminum case
offers protection with the
benefit of reduced weight.
Invision 354MP
Invision 456MP only
Invision 354MP only
Auto-Link® circuit automatically links
the power source to primary voltage
being applied (208-230/460 VAC,
single- or three-phase).
Microprocessor-based technology allows process
parameter storage to be retained between power down and
power up and also between program changes.
Auto Remote Sense enables unit to
automatically use remote control if
connected to remote control receptacle.
Protective cover for front control
panel protects controls from damage
in rough conditions.
Primary voltage display shows what
primary voltage the power source is
set for without removing the side
panels. Saves time and assures you
that the power source has been
correctly set for available input voltage.
Optional 10 amp, 115 VAC auxiliary
power available.
Standard 10 amp, 115 VAC auxiliary
power receptacle.
Inverter arc control technology provides greater puddle
control demanded especially by the pipe welding industry.
Welder is warranted for 3 years, parts and labor. Original main
power rectified parts are warranted for 5 years.
Miller Electric Mfg. Co.
International Headquarters
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
www.MillerWelds.com
Invision 354MP Specifications
™
(Subject to change without notice.)
Rated Output
Rated Output at
60% Duty Cycle
Voltage
Range in
CV Mode
Amperage
Range in
CC Mode
Max. OpenCircuit
Voltage
RMS Amps Input at Rated Load Output, 60 Hz
3-Phase at NEMA Load Voltages and Class I Rating
230 V 400 V 460 V 575 V KVA KW Dimensions
Three-Phase
300 A at 32 VDC
10 – 35 V
5 – 400 A
90 VDC
30.5
17
18.9
15.2
12.2
11.6
Single-Phase
225 A at 29 VDC
(Non-pulse
applications)
47.4
—
24.5
—
11.3
7.6
Weight
H: 17 in (432 mm)
Net: 76 lb
W: 12-1/2 in (318 mm) (34.5 kg)
D: 24 in (610 mm)
Ship: 85 lb
(38.6 kg)
Control Panel
6
7
8
1
1. Power Switch
2. Voltmeter
3. Ammeter/Trim Display
4. Select Push Button
5. Alphanumeric Display
6. Ammeter Indicator Light
7. Trim Indicator Light
8. Output Adjust Control
9. Increment Push Button
10. Decrement Push Button
2
3
9
4
10
5
Performance Data
DUTY CYCLE CHART
500
CV VOLT/AMP CURVE
CC VOLT/AMP CURVE
100
100
80
80
60
60
3-PHASE OPERATION
1-PHASE OPERATION
150
MAX.
40
20
15
20
25 30
40
% DUTY CYCLE
50 60 70 80 90 100
VOLTS
250
225
200
100
10
2
SMAW-MAX.
300
VOLTS
WELDING AMPS
400
0
100
200
SMAW-MIN.
0%
20
MIN.
0
40
300
AMPS
400
500
25%
50%
75%
0
0
100
200
100%
300
AMPS
400
500
Invision 456MP Specifications
™
Rated Output
Voltage
Rated Output at Range in
100% Duty Cycle CV Mode
Three-Phase
450 A at 38 VDC
10 – 38 V
(Subject to change without notice.)
Amperage
Range in
CC Mode
Max. OpenCircuit
Voltage
RMS Amps Input at Rated Load Output, 60 Hz
3-Phase at NEMA Load Voltages and Class I Rating
230 V 400 V 460 V 575 V KVA KW Dimensions
5 – 600 A
Stick
95 VDC
50.8
31
27.8
24.4
21.2
19.2
Weight
H: 17 in (432 mm)
Net: 118 lb
W: 14-1/2 in (368 mm) (53.5 kg)
D: 26 in (660 mm)
Ship: 129 lb
(58.5 kg)
Control Panel
6
7
1
8
2
3
9
4
10
5
1. Power Switch
2. Voltmeter
3. Ammeter/Trim Display
4. Select Push Button
5. Alphanumeric Display
6. Ammeter Indicator Light
7. Trim Indicator Light
8. Output Adjust Control
9. Increment Push Button
10. Decrement Push Button
Performance Data
200
150
100
10
100
100
80
80
60
VOLTS
300
CC VOLT/AMP CURVE
CV VOLT/AMP CURVE
3-PHASE OPERATION
VOLTS
WELDING AMPS
DUTY CYCLE CHART
600
500
400
MAX.
40
20
25 30
40
% DUTY CYCLE
50 60 70 80 90 100
40
SMAW
0%
0
0
15
60
20
MIN.
20
SMAW-MAX.
0
100
200
300
400
AMPS
500
600
700
0
100
25%
50%
75%
100%
200
300
400
500
600
700
AMPS
3
Genuine Miller Accessories
Protective Cover
#195 478
Mildew and water
resistant, odor-free
cover protects your
machine’s finish. For
300/350 A inverters:
XMT, Maxstar,
Invision and Dynasty.
Invision™ Cylinder Cart #042 537
Has adjustable handles and is slanted for
convenient access to power source front
panel controls. Carries two 160 lb (72.6 kg)
gas cylinders, or one gas cylinder and one
coolant system for TIG (GTAW) welding.
Feeder mounted to tray above power source.
Universal Carrying Cart and Cylinder Rack
#042 934
Accommodates Invision™ 354MP only, plus
gas cylinder up to 56 in (142.2 cm) high
measuring 6 to 9 in (15.2 to 22.8 cm) in
diameter. Also provides storage for
auxiliary items such as electrodes, helmets,
gloves, etc.
Coolmate V3
MIGRunner™ Cart #195 445
For 354MP only. Small footprint and easily
maneuverable, with cylinder rack low
enough that you do not have to lift bottles.
Durable, heavy-duty ergonomic handles are
designed for comfort.
Coolmate 4
Coolmate 3
Water Coolant Systems
For more information, see the Miller Coolant Systems literature sheet, Index No. AY/7.2.
MIGRunner ™ XL Cart
#195 246 (For all models)
Small footprint and easily maneuverable,
with cylinder rack low enough that you do
not have to lift bottles.
Coolmate™ 3
#043 007 115 VAC
#043 008 230 VAC
For use with water-cooled torches rated up
to 600 amps. Unique paddle-wheel indicator,
external filter and easy-fill spout.
Coolmate™ V3
#043 009 115 VAC
For use with water-cooled torches rated up
to 500 amps. Vertical design conveniently
mounts to Miller cylinder rack in place of
one cylinder.
4
Coolmate™ 4
#042 288 115 VAC
For use with water-cooled torches rated up
to 600 amps. Tough molded polyethylene
case with carrying handle.
Low Conductivity Coolant #043 810
Sold in cases of four 1-gallon recyclable
plastic bottles. Miller coolants contain a
base of ethylene glycol and deionized water
to protect against freezing to -37˚F (-38˚C)
or boiling to 227˚F (108˚C). Also contains a
compound that resists algae growth.
Wire Feeders
SuitCase 8RC #194 938
SuitCase™ 12RC #194 940
Lightweight, portable wire feeder for a
variety of wires up to .062 in. Holds up to
an 8 in (8RC) or 12in (12RC) spool of wire.
Operates using 14-pin control receptacle.
See Lit. Index No. M/6.5.
™
70 Series
S-74S #195 057
S-74D #195 058
Wire feeder features
Posifeed™ wire drive
assembly and
handles a variety of wires up to 1/8 in.
See Lit. Index No. M/3.0.
S-74 DX #195 059
Wire feeder features process and weld
control and handles a variety of wires up
to 1/8 in. See Lit. Index No. M/3.0.
XR Control #181 538
Push-pull wire feed system offers
unparalleled performance for aluminum
MIG welding.See Lit. Index No. M/1.7.
22A Wire Feeder #193 006
Simple, Reliable, 24 VAC constant-speed
semiautomatic wire feeder, best suited for
small diameter wires. Accommodates up
to a 60 lb (27.2 kg) spool of welding wire
when using optional wire reel assembly.
See Lit. Index No. M/11.0.
International-Style Connectors
Note: The Invision 354MP power source is equipped
with International-style connectors for secondary
connections. (Power source is shipped with two
50-mm male International-style plugs for use with
#4 to #1/0 AWG size cable.)
International-Style Connector Kit
#042 418 50 mm
Accepts #4 to #1/0 AWG cable size.
Required if male plugs shipped with power
source must be replaced, if additional plugs
are needed.
#042 533 70 mm
Accepts #1/0 or #2/0 AWG cable size.
Required if #1/0 or #2/0 AWG size cable is
to be used.
Kit includes one International-style male
plug which attaches to the work and/or weld
cables and plugs into the International-style
receptacles on the power source.
Extension Cables for 14-Pin Plugs
to 14-Pin Sockets
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)
(Will accept Dinse™ or other International connectors.)
Extension Kit for International-Style
Cable Connectors
#042 419 50 mm
Accepts #4 to #1/0 AWG size cable.
#042 534 70 mm
Accepts #1/0 or #2/0 AWG size cable.
Used to adapt or extend weld and/or work
cables. Kit includes one male Internationalstyle plug and one in-line female
International-style receptacle.
International/Tweco®
Adapter #042 465
A one-piece adapter which
has an International-style
male plug (to power
source) on one end and a female Tweco
receptacle (for weld cable connection) on
other end.
International/Cam-Lok
Adapter #042 466
A one-piece adapter which
has an International-style
male plug (to power source) on one end
and a Cam-Lok receptacle (for weld cable
connection) on other end.
5
Typical Systems for Invision 354MP
™
Aluminum System
Invision 354MP #903 593
XR-Control Wire Feeder #181 538
XR-A Edge 30 ft Gun #181 535
XR-W Edge 30 ft Gun #181 532
Steel and Stainless Steel System
Invision 354MP #903 593
SuitCase 12RC Feeder #194 940
Note: Guns are available in other lengths.
Typical Systems for Invision 456MP
™
Aluminum System
Invision 456MP #903 725
XR-Control Wire Feeder #181 538
XR-W Edge 30 ft Gun #181 532
Note: Guns are available in other lengths.
6
Steel and Stainless Steel System
Invision 456MP #903 725
S-74D Wire Feeder #195 058
Package Components
Invision™ 354MP MIGRunner™ #907 051
Comes Complete With:
Invision 354MP
S-74D wire feeder
Roughneck™ C-4015 gun
Consumables
.035 and .045 in drive roll kit
Regulator/flow gauge with gas hose
10 ft assembled work and positive weld cables
10 ft factory-installed power cord
Factory-installed running gear and cylinder rack
Bottom tray will hold optional Coolmate 3
(sold separately)
The Invision 354MP combines the advantages of
an inverter-based power source with built-in
pulse features for pulsed MIG welding. Perfectly
matched with the full-featured S-74D wire feeder
and durable Roughneck® gun, accessories and
running gear, this package is an outstanding
industrial-class welding system.
7
Ordering Information
Equipment and Options
Stock No.
Description
Qty.
Invision™ 354MP
#903 593
#903 593-01-1
#903 756
#907 057
208-230/460 VAC with Auto-Link®
208-230/460 VAC with Auto-Link® and Aux. Power
400 VAC with Aux. Power and CE
575 VAC
Invision™ 354MP MIGRunner
#907 051
208-230/460 VAC with Auto-Link®. See page 7 for components
Invision 456MP
#903 725
#903 598
#907 056
230/460 VAC
400 VAC
575 VAC
Power Source
™
Accessories
MIGRunner™ Cart
#195 445
MIGRunner™ Cart XL
#195 246
Invision™ Cylinder Cart
#042 537
Universal Cart and Cylinder Rack
#042 934
For use with Invision™ 354MP only
Coolmate 3
#043 007
#043 008
115 VAC
230 VAC
Coolmate™ V3
#043 009
115 VAC
Coolmate™ 4
#042 288
115 VAC
Coolant
#043 810
™
Wire Feeders
SuitCase™ 12RC
#194 940
See Lit. Index No. M/6.5
70 Series
#195 057
#195 058
#195 059
S-74S. See Lit. Index No. M/3.0
S-74D. See Lit. Index No. M/3.0
S-74DX. See Lit. Index No. M/3.0
22A
#193 066
See Lit. Index No. M/11.0
XR™-Control
#181 538
See Lit. Index No. M/1.7
XR-Edge™ Gun
See Lit. Index No. M/1.7
XR-Pistol Gun
Extension Cords
(For 24 VAC wire feeders and remote controls)
See Lit. Index No. M/1.7
#122 973
#122 974
#122 975
25 ft (7.6 m)
50 ft (15.2 m)
75 ft (22.8m)
International-Style Connector Kit
#042 418
#042 533
50 mm
70 mm
Extension Kit for International-Style
Cable Connectors
#042 419
#042 534
50 mm
70 mm
International-Style Connectors
International/Tweco® Adapter
#042 465
A one-piece adapter with International-style male plug
International/Cam-Lok Adapter
#042 466
A one-piece adapter with International-style male plug
Date:
Total Quoted Price:
Note: Invision 354MP will operate from 200/208 VAC, but will not compensate for low line fluctuations at this level.
Meets NEMA rated output standards using 230/460 VAC primary only.
Distributed by:
Litho in USA
Price
Invision 350 MPa System
Issued Nov. 2007 • Index No. DC/23.5
™
Quick
Specs
Heavy Industrial Applications
Invision 350 MPa
Processes
Invision 350 MPa
Railroad
Truck/Trailer Manufacturing
Light Gauge and Tube
Lawn and Garden Equipment
Recreational Vehicles
MIG (GMAW)/Pulsed MIG (GMAW-P)
Flux Cored (FCAW)
Air Carbon Arc Cutting and Gouging
(CAC-A) (1/4 in carbons max.)
S-74 MPa
MIG (GMAW)
Flux Cored (FCAW)
Pulsed MIG (GMAW-P)
S-74 MPa
Heavy/Light Manufacturing
Metal Fabrication
MIG Welding
Power Source
Invision 350 MPa
Input Power Requires 3- or 1-Phase Power, 50/60 Hz
Rated Output 10 – 38 V, 5 – 425 A
Weight
Net: 80 lb (36.3 kg) Ship: 89.1 lb (40.4 kg)
S-74 MPa
Input Power 24 VAC, 10 A, 50/60 Hz
Electrode Wire Dia. Capacity .023 –5/64 in (0.6–2 mm)
Wire Speed 50–780 IPM (1.3–19.8 m/min)
Weight
Net: 58 lb (26 kg)
The Power of Blue .
®
Dynamic Pulsed MIG — highly-engineered
pulse programs default to give a tight
productive pulse arc. The operator can
fine tune the arc if desired.
Auto-Line™ Power Management
Technology allows for any input voltage
hook-up (208 – 575 V) with no manual
linking required, providing convenience
in any job setting. Ideal solution for dirty
or unreliable input power.
Invision 350 MPa System
Add the new S-74 MPa feeder for a
package that gives you the benefit of
Synergic-Pulsed MIG. As you increase/
decrease the wire feed speed, the pulse
parameters increase/decrease matching
the right amount of power output to
the wire speed.
Fan-On-Demand™ cooling system
operates only when needed, reducing
noise, energy use and the amount of
contaminants pulled through machine.
Large, dual digital meters are easy to
view and are presettable to ease setting
weld output.
SharpArc™ technology changes welding arc
characteristics in Pulsed MIG welding mode.
Inverter arc control technology provides
greater puddle control for outstanding MIG
weld performance.
Lightweight, aerospace-grade aluminum
case offers protection with the benefit of
reduced weight.
Line voltage compensation keeps welding
output constant even if input power varies
by +/-10%. XMT 350 models further expand
line voltage compensation on 460 VAC to
an amazing +37%, -59%.
Easy setup for MIG and Pulsed MIG
applications.
Power source is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Gun warranted for 90 days, parts and labor.
Miller Electric Mfg. Co.
International Headquarters
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
www.MillerWelds.com
Specifications
(Subject to change without notice.)
Input
Power
Rated Output
at 60%
Duty Cycle
Voltage
Range in
CV Mode
Amperage
Range in
CC Mode
Max. OpenCircuit
Voltage
Amps Input at Rated Load Output, 60 Hz,
208 V 230 V 400 V 460 V 575 V KVA KW
ThreePhase
350 A at
34 VDC
10 – 38 V
5 – 425 A
75 VDC
40.4
36.1
20.6
17.8
14.1
14.2 13.6
SinglePhase
300 A at
32 VDC
10 – 38 V
5 – 425 A
75 VDC
60.8
54.6
29.7
24.5
19.9
11.7 11.2
Dimensions
Weight
H: 17 in (432 mm)
W: 12-1/2 in (318 mm)
D: 24 in (610 mm)
80 lb
(36.3 kg)
Certified to both the Canadian and U.S. Standards for welding equipment.
Additional Features
Exceptional electrical efficiency. At 400 A,
efficiency is 87.24%!
350 A of welding output at 60% duty cycle
with superior low-end performance.
Power factor of .95 enables smaller
fuses/breakers and primary wiring. Primary
amperage draw at rated output is 25% less
than the competition.
Ultra-tough, polycarbonate-blended cover
for control panel protects front controls
from damage.
Performance Data
CV VOLT/AMP CURVE
DUTY CYCLE CHART
100
500
425
400
80
70
300
1-PHASE OPERATION
VOLTAGE
WELDING AMPERES
350
90
3-PHASE OPERATION
250
6 AWG POWER CORD
200
60
50
MAX
40
8 AWG POWER CORD
30
150
20
MIN
10
0
100
10
15
20
25
30
DUTY CYCLE
2
40
50
60
70 80 90 100
0
100
200
300
AMPS
400
500
Control Panel
The Invision™ 350 MPa and S-74 MPa combine for a synergic system that simplifies and
improves MIG and Pulsed MIG welding applications for industrial manufacturing.
MPa
6
1
OUTPUT ON
Setup
2
3
4
7
8
9
Arc Control
Process
Wire/Gas
5
10
SETUP
1.
2.
3.
4.
5.
6.
7.
Output ON Indicator Light
Left Display
Voltage Indicator
Arc Length Indicator
Wire Feeder Receptacle
Adjustment Control
Right Display
8. Setup Indicator
9. Amperage Indicator
10. Setup Indicator Lights
• Arc Control Indicator
• Process Indicator
• Wire/Gas Type Indicator
• Setup Button
MPa: M (MIG), P (Pulse), a (Advanced
Arc Control). Advanced arc control
enables an improved pulse welding arc.
The operator has more control over puddle
and bead characteristics using SharpArc™.
In addition, the unit provides a more robust
and stable arc at very low arc length, reducing
heat input, and providing the ability to weld
on a wider range of material thickness.
Synergic pulsing is available only with the
S-74 MPa dedicated wire feeder.
What are some benefits of
Synergic-Pulsed MIG?
1. Easier to set up
2. No more changing wire speed, and
then having to go back to reset the
welding output.
Additional Features
SharpArc™
Changes welding arc characteristics in
Pulsed MIG (GMAW-P) welding mode.
Built-In Pulsed MIG Programs
(0 setting)
(50 setting)
The Invision 350 MPa has built-in dynamic Pulsed MIG capabilities. See the table below for the wide
range of Pulsed MIG (GMAW-P) welding applications the Invision 350 MPa can handle.
Low Setting
Wire Types
Gas Types
Steel
.035 STL
.045 STL
ARGN CO2 (Argon/Carbon Dioxide)
ARGN OXY (Argon/Oxygen)
Metal Core
.035 MCOR
.045 MCOR
.052 MCOR
ARGN CO2 (Argon/Carbon Dioxide)
Stainless Steel
.035 SSTL
.045 SSTL
TRI MIX (Tri-gas mixture)
ARGN OXY (Argon/Oxygen)
ARGN CO2 (Argon/Carbon Dioxide)
High Setting
Note: Setting has a subtle effect on arc that is
exaggerated in graphic for visual emphasis.
If a gas is used other than what is listed
on the Pulsed MIG welding program
chart (below left), the SharpArc™ can be
adjusted to help customize your arc to the
gas being used.
.035 AL4X (4000 Series)
3/64 AL4X (4000 Series)
.035 AL4X (5000 Series)
3/64 AL4X (5000 Series)
ARGN (Argon)
Lower SharpArc™ settings widen the arc
cone, increase puddle fluidity and flattens
the weld bead.
Nickel
.035 NI
.045 NI
ARGN HE (Argon/Helium)
Silicon Bronze
.035 SIBR
ARGN (Argon)
Auto Remote Sense™
Enables unit to automatically use remote
control if connected to remote control
receptacle.
Copper Nickel
.045 CUNI
HE ARGN (Helium/Argon)
Aluminum
Dinse International-style weld disconnects
Provide high-quality weld cable connections.
Dinse and Tweco connectors are available.
When Dinse connectors are specified, two
connectors are supplied with the unit.
Optional 115 VAC auxiliary power
Provides 10 amps of circuit-breakerprotected power for water circulators, etc.
3
S-74 MPa Single Feeder Features
Posifeed™ Wire Drive Assembly Features
(Synergic Pulsed MIG when connected to the Invision 350 MPa)
24 VDC high-torque, permanent-magnet motor.
Quick-change drive rolls.
Quick-release, calibrated drive-roll pressure adjustment arm allows drive roll change
without losing spring preload setting.
Four sealed ball bearing all-gear-driven drive-roll carriers for smooth, positive and
accurate wire feed with long uninterrupted service life.
Easy loading and threading of welding wire without having to release the drive-roll
pressure arm.
Solid-state speed control and brake circuit eliminates the need for electrical/
mechanical relays and increases service life.
Uses Miller standard 1-5/8 in (41 mm) diameter drive rolls.
Quick-connect for all Miller guns.
Covered drive rolls — easy access, heavy-duty, molded composite cover over
drive assembly.
Floating positive drive systems provide trouble-free feeding on a variety of wires.
Tool-less rotatable drive assembly
allows operator to rotate the drive
housing, eliminating severe bends in the
wire feed path which reduce gun liner
life. Also aids in feeding difficult wires.
Specifications
Dual tension control adds flexibility
for the operator to fine-tune the
pressure on the wire independently
when feeding a variety of wires.
(Use with CV
Power Sources.)
(Subject to change without notice.)
Input Power
Electrode Wire Diameter Capacity
Wire Speed
Dimensions
Net Weight
24 VAC, 10 A, 50/60 Hz
.023–5/64 in (0.6–2 mm)
50–780 IPM (1.3–19.8 m/min)
Optional High Speed Motor:
90–1440 IPM (2.3–36.6 m/min)
H: 14 in (356 mm)
W: 12 in (305 mm)
D: 26-1/2 in (673 mm)
58 lb (26 kg)
Control Panel
1
2
3
5
4
6
S-74 MPa
24V Wire Feeder
4
1. Voltage Display Meter
2. Wire Speed Display Meter
3. Wire Feed Speed Select
4. Trigger Hold
5. Voltage Select
6. Jog/Purge
Invision 350 MPa System Components
™
Invision™ 350 MPa MIGRunner ™ #907 398
Comes Complete With:
Invision 350 MPa power source
S-74 MPa wire feeder
Bernard® Q™-Gun
Consumables
.035/.045 in drive roll kit
NEW! Industrial MIG 4/0 Kit with
Dinse Connector
MIGRunner Cart with cylinder rack
Bottom tray will hold optional Coolmate 3
(sold separately)
Invision™ 350 MPa Stationary Package
#951 113
Comes Complete With:
Invision 350 MPa power source
S-74 MPa wire feeder
Bernard® Q™-Gun
Consumables
.035/.045 in drive roll kit
NEW! Industrial MIG 4/0 Kit with
Dinse Connector
For Your Aluminum Welding Applications
Invision™ 350 MPa Push-Pull Aluminum
Package #951 115
Comes Complete With:
Invision 350 MPa power source
XR™-Control Box
25 ft (7.6 m) air-cooled XR-Aluma-Pro™ Gun
5
Genuine Miller Accessories
Running Gear
Wire Feeders/Guns
MIGRunner ™ Cart
#195 445
Small footprint
and easily
maneuverable,
with cylinder
rack low enough
that you do not
have to lift bottles.
Industrial MIG 4/0 Kit with Dinse
Connector #300 405
This useful pulse-ready MIG kit can be
purchased separately. Includes Smith®
flowmeter/regulator with 10 ft (3 m) gas
hose, 10 ft (3 m) 4/0 feeder weld cable with
Dinse connector on one end and a lug on
the other, 15 ft (4.6 m) work cable with
Dinse connector on one end and 600-amp
C-clamp on the other.
XMT Cylinder Cart
#042 537
Carries two 160 lb
(72.6 kg) gas
cylinders, or one
gas cylinder and
one coolant
system for TIG
(GTAW) welding.
Feeder mounts to
tray above power
source.
Process Selector Control #042 872
Designed for use with dual wire feeders,
applications where electrical isolation and/or
polarity reversing of weld current is required,
and for welding process changes. Includes
115 VAC/2 amp receptacle, two 14-pin
receptacles and a 10 ft (3 m) 14-pin cord.
Universal
Carrying Cart and
Cylinder Rack
#042 934
Holds power
source, and gas
cylinder up to 56 in
(142.2 cm) high
measuring 6 to 9 in
(15.2 to 22.8 cm)
in diameter.
Protective Cover
#195 478
Mildew and water resistant, odor-free
cover protects your machine’s finish.
For 300/350 A inverters: Invision, XMT,
Maxstar and Dynasty.
70 Series
S-74 MPa #300 411*
S-74S
#195 057
S-74D
#195 058
S-74DX
#195 059
Wire feeder features Posifeed™ wire drive
assembly and handles a variety of wires up to
1/8 in. Comes with FREE Bernard® Q™-Gun.
See Lit. Index No. M/3.0.
*Designed exclusively for Invision 350 MPa for
Synergic Pulsed MIG benefits.
XR™-Control #181 538
Push-pull wire feed
system offers
unparalleled performance
for aluminum MIG
welding. See Lit.
Index No. M/1.7.
XR™-Aluma-Pro™ Gun*
#300 000 15 ft (4.6 m) air-cooled
#300 001 25 ft (7.6 m) air-cooled
#300 264 35 ft (10.6 m) air-cooled
#300 003 15 ft (4.6 m) water-cooled
#300 004 25 ft (7.6 m) water-cooled
#300 265 35 ft (10.6 m) water-cooled
This easy-to-use and easy-to-maintain
gooseneck-style MIG gun is designed for
push-pull wire feed systems (with required
XR-Control). Available in air- or watercooled versions. Trigger hold reduces
operator fatigue (feature available when
paired with XR-Control). Gun design allows
for better access into tight spots. See Lit.
Index No. M/1.7.
*XR-Control is required to operate this gun with
the Invision 350 MPa System.
6
Genuine Miller Accessories
(continued)
WC-24 Weld Control
#137 549
Designed for use with
Miller CV power sources
supplying 24 VAC and
14-pin receptacles. For
use with Spoolmatic
30A spool gun.
22A #193 066
Simple, reliable, 24 VAC constant-speed
semiautomatic wire feeder, best suited for
small diameter wires. Accommodates up to
60 lb (27.2 kg) spool of welding wire when
using optional wire reel assembly. Comes
with FREE Bernard® Q™-Gun! See Lit. Index
No. M/11.0.
24A #195 112
Simple, reliable, 24 VAC constant-speed
semiautomatic wire feeder, best suited for
small diameter wires. Remote voltage is
standard. Features four gear-driven drive
rolls for larger wire sizes. Accommodates
up to 60 lb (27.2 kg) spool of welding wire
when using optional wire reel assembly.
Comes with FREE Bernard® Q™-Gun! See
Lit. Index No. M/11.0.
Spoolmatic® 30A #130 831
A 1-lb, air-cooled spool gun that extends
the weld process range by adding a handy
portable system for small wire MIG. Rated
200 A at 100% duty cycle. Includes 30 ft
(9.1 m) cable assembly. (WC-24 #137 549
for 14 pin.)
Water Coolant Systems
For more information, see the Miller Coolant
Systems literature sheet, Index No. AY/7.2.
Coolmate™ 3
#043 007 115 VAC
#043 008 230 VAC
For use with water-cooled torches rated up
to 600 amps. Unique paddle-wheel
indicator, external filter and easy-fill spout.
Coolmate V3 #043 009 115 VAC
For use with water-cooled torches rated up
to 500 amps. Vertical design conveniently
mounts to Miller cylinder rack in place of
one cylinder.
™
Coolmate™ 4 #042 288 115 VAC
For use with water-cooled torches rated up
to 600 amps. Tough molded polyethylene
case with carrying handle.
International-Style Connectors
Note: XMT 350 power sources are equipped with
International-style connectors for secondary
connections. (Power source is shipped with two
50-mm male International-style plugs for use with
#1 or #2 AWG size cable.)
International/Tweco®
Adapter #042 465
International/Cam-Lok
Adapter #042 466
One-piece adapter with International-style
male plug (to power source) on one end and
female receptacle (Tweco or Cam-Lok for
weld cable connection) on other end.
International-Style Connector Kit
#042 418 50 mm
Accepts #4 or #1/0 AWG cable size. Required
if male plugs shipped with power source must
be replaced, or if additional plugs are needed.
#042 533 70 mm
Accepts #1/0 or #2/0 AWG cable size.
Required if #1/0 or #2/0 AWG size cable is
to be used.
Kit includes one International-style male
plug which attaches to the work and/or weld
cables and plugs into the International-style
receptacles on the power source.
Extension Kit for International-Style
Cable Connectors
#042 419 50 mm
Accepts #4 or #1/0 AWG size cable.
#042 534 70 mm
Accepts #1/0 or #2/0 AWG size cable.
Used to adapt or extend weld and/or work
cables. Kit includes one male Internationalstyle plug and one in-line female
International-style receptacle.
Coolant #043 810
Sold in cases of four 1-gallon recyclable
plastic bottles. Miller coolants contain a
base of ethylene glycol and deionized water
to protect against freezing to -37˚F (-38˚C)
or boiling to 227˚F (108˚C). Also contains a
compound that resists algae growth.
7
Ordering Information
Power Source and Options
Stock No.
Description
Invision™ 350 MPa
#907 397
#907 397-01-1
208 – 575 VAC with Auto-Line™
208 – 575 VAC with Auto-Line™ and Auxiliary Power
Invision™ 350 MPa System
Qty.
See page 5 for different packages and components
Accessories
Industrial MIG 4/0 Kit with Dinse Connector
#300 405
See page 6
WC-24
#137 549
For use with Spoolmatic® 30A and power sources with 14-pin
Process Selector Control
#042 872
Extension Cords (For 24 VAC wire
feeders and remote controls)
#043 690
#043 691
25 ft (7.6 m)
50 ft (15 m)
Running Gear
MIGRunner™ Cart
#195 445
XMT Cylinder Cart
#042 537
Universal Carrying Cart and Cylinder Rack
#042 934
Protective Cover
#195 478
Wire Feeders/Guns
70 Series
#300 411
#195 057
#195 058
#195 059
S-74 MPa. Designed exclusively for Invision 350 MPa for
Synergic Pulsed MIG benefits
S-74S. See Lit. Index No. M/3.0
S-74D. See Lit. Index No. M/3.0
S-74DX. See Lit. Index No. M/3.0
XR™-Control
#181 538
See Lit. Index No. M/1.7
22A
#193 066
See Lit. Index No. M/11.0
24A
#195 112
See Lit. Index No. M/11.0
Spoolmatic® 30A Spool Gun
#130 831
Includes 30 ft (9.1 m) cable assembly
XR-Aluma-Pro™ Gun
#300 000
#300 001
#300 264
#300 003
#300 004
#300 265
15 ft (4.6 m) air-cooled
25 ft (7.6 m) air-cooled
35 ft (10.6 m) air-cooled
15 ft (4.6 m) water-cooled
25 ft (7.6 m) water-cooled
35 ft (10.6 m) water-cooled
Water Coolant Systems
See page 7. See Lit. Index No. AY/7.2
International-Style Connectors
See page 7
Date:
Total Quoted Price:
Distributed by:
Litho in USA
Price
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement