Section V - Kellems Wire Management Products

Section V - Kellems Wire Management Products
Section V
Kellems® Wire Management Products
Index
Product
Page
Kellems® Wire Mesh Grips Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-2
Quick Reference Selection Guide for Grip Applications . . . . . . . . . . . . . . . . .V-4
Pulling Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-5
Overhead DUA-PULL® Pulling Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-6
Overhead Multiple Strength Pulling Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-7
Underground K-Type Pulling Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-8
Underground T-Type Pulling Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-9
Special Purpose Pulling Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-10
Low Tension Pulling Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-12
Wire Rope Splicing Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-13
Cable Splicing Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-14
Tools, Bands, and Swivels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-15
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-17
Support Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-27
Standard Duty Support Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-30
Heavy Support Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-34
Service Drop Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-36
Bus Drop Support Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-38
Conduit Riser Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-39
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-41
Fiber Optic Cable Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-46
Pulling Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-47
Support Grips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-50
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-51
Hose Containment Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-55
Strain Relief System Selection Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-56
Strain Relief Grips for Flexible Cords. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-57
Deluxe Cord Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-58
PG and Metric Threaded Deluxe Cord Grips . . . . . . . . . . . . . . . . . . . . . . . . .V-62
Dust-Tight Strain Relief Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-63
I-Grips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-64
Thread Adapters for Multi-Pin Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . .V-65
Strain Relief Grips for Liquidtight Conduit . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-66
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-69
Cord Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-77
Straight Male Cord Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-78
45° and 90° Male Cord Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-81
Straight Female and Underground Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . .V-82
Low Profile NPT, PG and Metric Thread Connectors . . . . . . . . . . . . . . . . . . .V-83
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-84
Hubbell Juniors® Miniature Nylon Cord Connectors. . . . . . . . . . . . . . . . . . . .V-85
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-87
PolyTuff® Non-Metallic Liquidtight Conduit and Tubing. . . . . . . . . . . . . . . . .V-98
PolyTuff® Non-Metallic Liquidtight Fittings . . . . . . . . . . . . . . . . . . . . . . . . . .V-100
Metallic Liquidtight Conduit Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-101
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .V-102
www.hubbell-wiring.com
®
Pulling Grips
Support Grips
Strain Relief Grips
Liquidtight Conduit,
Tubing and Fittings
Wiring Device-Kellems
V-1
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Wire Management Products
Kellems® Wire Mesh Grips Diagram
Bus Drop
Support Grip
Flexible
Conduit Grip
Support Grip
Support Grip
INDUSTRY
Deluxe
Cord Grip
Flexible
Conduit
Grip
Strain
Relief
Grip
To help you fully visualize the variety of uses available to you through Hubbell-Kellems
Mesh Grips, we have prepared this diagram of common applications. It follows the typical
pattern of usage you would find traveling from utility to industrial, commercial and residential
environments.
Pulling Grips are instrumental in the installations of transmission lines, service lines and
cabling for construction and maintenance.
Support Grips provide holding management for indoor and outdoor permanent
cable installations.
Strain Relief Grips are most often used to provide maximum reliability and minimum
maintenance in areas where cords on machinery or equipment is impacted by motion or
vibration or at risk of damage from cable pullout.
Beyond the electrical applications illustrated here, Hubbell-Kellems Mesh Grips can be used
for wire management on radio and microwave communications towers,
crane and hoist wire rope maintenance, elevator cable management and more.
Support Grip
Conduit
Support Grip
UTILITY
V-2
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Overhead
Pulling Grip
UTILITY
Bus Drop
Support Grip
Deluxe Cord Grip
Bus Drop
Support Grip
Underground
Pulling Grip
INDUSTRY
ose Contain ent Grip
Strain Relief Grip
Conduit Support
Support Grip
Underground
Pulling Grip
COMMERCIAL
www.hubbell-wiring.com
RESIDENTIAL
®
Wiring Device-Kellems
V-3
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Quick Reference Selection Guide for Grip Applications
Pulling Grips
Heavy-Duty
Rotating Eye
For underground
wiring and overhead
heavy-duty pulling
of service lines and
new construction
cable. See pages
V-7 and V-8.
Heavy-Duty
Flexible Eye
For overhead
transmission and
distribution line
stringing. See pages
V-6, V-7, and V-9.
Slack Grips
For removing
underground cable
and pulling slack in
existing cable and
new installations
and when end of
cable is not available.
See pages V-10
and V-11.
Light-Duty
Flexible Eye
For light industrial
pulling of electrical
cable and for
underground and
industrial plant wiring
and re-wiring.
See page V-12.
Double Eye
For double hook
attachment of
permanent indoor/
outdoor cable.
Available on heavyduty and standard
duty grips. See
pages V-29 and
V-33.
Single Offset Eye
For offset hook
attachment of
permanent indoor/
outdoor cable.
Available on
standard duty and
light-duty support
grips. See page
V-30.
Universal Eye
Used to fasten
around a structure or
closed loop. Available
on standard duty
support and light or
heavy duty service
drop grips. See
pages V-31
and V-35.
Deluxe Cord
Indoor or outdoor
use where subject to
moisture, splash, or
washdown. Examples
are enclosures, crane
hoist and pendant
drop stations, hand
tools, pumps,
and processing
equipment. Available
in straight, 90°, or 45°
configurations. See
pages V-58 to V-61.
Liquid-Tight,
Flexible Metal
Conduit
Wiring of machine
tools, electrical
enclosures, motors,
and systems
subjected to vibration,
flexure, motion, or
strain. Available in
straight, 90°, or 45°
configurations. See
pages V-66 to V-68.
Support Grips
Single Eye
For single hook
attachment
of permanent
indoor/outdoor
cable. Available
on heavy-duty,
standard duty,
and service drop
grips. See pages
V-28, V-32, and
V-34.
Support Grips
Wide Range
Bus Drop
Used indoors for
cable support
where flexible
cable connects
electrical
equipment to bus
duct. Support air
hose and water
hose. See page
V-36.
Strain Relief Grips
Dust-Tight
Strain Relief
Indoor use only for
wiring of electrical
enclosures,
machine tools,
portable power
tools, bus drop
cable systems.
See page V-63.
Other Specialty Grips
Splicing Grips
Used as temporary splice for cable and wire rope, or as reinforcement to protect cables and hoses. See pages V-13 and V-14.
Conduit Riser Grips
Ideal for supporting electrical wires inside rigid conduit via a supporting ring. See pages V-38 to V-40.
Hose Containment Grips
Used on flexible hose lines to prevent violent whipping of hose in the event of failure at the fitting. See page V-55.
Specifications are subject to change without notice.
V-4
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Pulling Grips
Overhead, Underground, Commercial Construction, Specialty
Flexible or rotating eyes will mate easily with line stringing swivels
for attachment to pulling lines; they have great strength for
trouble free pulling jobs
Shoulder protectors contain the cable inside the grip and smooth
the passage of the grip over line stringing blocks or conduit bends;
they protect the leading edge of the grip from abrasion
The galvanized steel mesh grip provides strength for secure pulling
jobs and a slim profile with little build-up; it has flexibility to follow
cable path
The multiweave styles available add strength for big pulling jobs
and provide positive gripping power
Endless weave allows easy installation onto cable. It has a snag-free
low profile; designed to be a reusable tool
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-5
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Overhead Pulling Grips
Galvanized Steel
DUA-PULL® Grips, Flexible Eye, Double Weave Mesh
IMPORTANT
DUA-PULL Pulling Grips are the highest strength pulling grips manufactured for overhead
transmission line stringing applications. They have a dual function, not provided by any
other grip, of working with both bare and insulated conductors
and synthetic rope.
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-17 to V-26.
E
M
B
DUA-PULL® Grips
Diameter Range
Conductor
Inches (cm)
Rope*
Inches (cm)
Approx.
Breaking
Strength
Lbs. (N)
.19"-.37"
(.48-.94)
.25"-.65"
(.63-1.65)
.38"-.62"
(.97-1.57)
E
Inches (cm)
M
Inches (cm)
Eye B
Diameter
Inches (cm)
Over Cable
and Grip**
Inches (cm)
Color Code
Catalog Number
6,500
(28,912)
10" (25.40)
24" (60.96)
.220" (.56)
.200" (.51)
Black
033271037
.50"-.90"
(1.27-2.29)
14,000
(62,272)
12" (30.48)
36" (91.44)
.375" (.95)
.280" (.71)
Dk Green
033271038
.63"-.87"
(1.60-2.21)
.75"-1.10"
(1.90-2.79)
20,000
(88,960)
13" (33.02)
48" (121.92)
.437" (1.11)
.360" (.91)
Red
033271039
.88"-1.12"
(2.24-2.84)
1.00"-1.50"
(2.54-3.81)
30,600
(136,109)
15" (38.10)
60" (152.40)
.500" (1.27)
.500" (1.27)
Dk Blue
033271040
1.13"-1.37"
(2.87-3.48)
1.25"-1.70"
(3.17-4.32)
46,800
(208,166)
18" (45.72)
76" (193.04)
.625" (1.59)
.625" (1.59)
Yellow
033271041
1.38"-1.90"
(3.51-4.38)
1.50"-2.10"
(3.81-5.33)
66,500
(295,792)
24" (60.96)
89" (226.06)
.750" (1.90)
.750" (1.90)
Aluminum
033271042
Note: E = Eye length. M = Mesh length at nominal diameter.
*For rope, select smallest size grip which meets required work load.
**Add to cable or rope diameter.
DUA-PULL® Feed Tube
V-6
For Use with
DUA- PULL Grip
Rope Diameter
Inches (cm)
Feed Tube Length
Inches (cm)
Catalog Number
033271037
.25"-.65" (.63-1.65)
28" (71.12)
091061043
033271038
.50"-.90" (1.27-2.29)
40" (101.60)
091061044
033271039
.75"-1.10" (1.90-2.79)
52" (132.08)
091061045
033271040
1.00"-1.50" (2.54-3.81)
67" (170.18)
091061046
033271041
1.25"-1.70" (3.17-4.32)
83" (210.82)
091061047
033271042
1.50"-2.10" (3.81-5.33)
96" (243.84)
091061048
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Overhead Multiple Strength Pulling Grips
Flexible or Rotating Eye, Triple, Double, Single Weave, Galvanized Steel
Multiple Strength Style Grips
IMPORTANT
Multiple Strength Pulling Grips are designed for pulling aluminum or copper bare
conductor, ground wires, messenger strands, wire rope and insulated cables.
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-17 to V-26.
E
M
Multiple Strength Grip-Rotating Eye
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Rotating Eye Dia.
Inches (cm)
Color Code
Catalog Number
.25"-.49" (.63-1.24)
6,800 (20,567)
5" (12.70)
26" (66.04)
⁷⁄₈" (2.22)
Dark Green
03302016
.50"-.74" (1.27-1.88)
10,000 (44,480)
6" (15.24)
32" (81.28)
1" (2.54)
Brown
03302018
.75"-.99" (1.90-2.51)
14,400 (64,051)
6" (15.24)
41" (104.14)
1" (2.54)
Light Blue
03302020
1.00"-1.24" (2.54-3.15)
24,600 (109,420)
8" (20.32)
52" (132.08)
1³⁄₈" (3.49)
Gold
03302022
1.25"-1.49" (3.17-3.78)
30,600 (136,109)
8" (20.32)
56" (142.24)
1⁵⁄₈" (4.13)
Black
03302024
1.50"-1.74" (3.81-4.42)
30,600 (136,109)
9" (22.86)
60" (152.40)
1⁷⁄₈" (4.76)
Red
03302026
1.75"-2.24" (4.44-5.69)
48,000 (213,504)
10" (25.40)
70" (177.80)
1⁷⁄₈" (4.76)
Dark Blue
03302028
2.00"-2.49" (5.08-6.32)
48,000 (213,504)
10" (25.40)
50" (127.00)
1⁷⁄₈" (4.76)
Yellow
03302066
2.50"-2.99" (6.35-7.59)
48,000 (213,504)
10" (25.40)
52" (132.08)
1⁷⁄₈" (4.76)
Orange
03302097
3.00"-3.49" (7.62-8.86)
48,000 (213,504)
10" (25.40)
50" (127.00)
1⁷⁄₈" (4.76)
Aluminum
033021030
3.50"-3.99" (8.89-10.13)
48,000 (213,504)
10" (25.40)
53" (134.62)
1⁷⁄₈" (4.76)
Light Green
033021031
Note: E- Eye length M-Mesh length at nominal diameter.
E
M
A
Multiple Strength Grip-Flexible Eye
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Eye A Dia.
Inches (cm)
Color Code
Catalog Number
.25"-.49" (.63-1.24)
6,800 (20,567)
9" (22.86)
26" (66.04)
¹⁄₄" (.63)
Dark Green
03302044
.50"-.74" (1.27-1.88)
10,000 (44,480)
9" (22.86)
32" (81.28)
⁵⁄₁₆" (.79)
Brown
03302046
.75"-.99" (1.90-2.51)
14,400 (64,051)
11" (27.94)
41" (104.14)
³⁄₈" (.95)
Light Blue
03302048
1.00"-1.24" (2.54-3.15)
24,600 (109,420)
12" (30.48)
52" (132.08)
¹₂" (1.27)
Gold
03302050
1.25"-1.49" (3.17-3.78)
30,600 (136,109)
12" (30.48)
56" (142.24)
¹₂" (1.27)
Black
03302052
1.50"-1.74" (3.81-4.42)
30,600 (136,109)
12" (30.48)
60" (152.40)
¹₂" (1.27)
Red
03302054
1.75"-2.24" (4.44-5.69)
48,000 (213,504)
18" (45.72)
70" (177.80)
⁵⁄₈" (1.59)
Dark Blue
03302056
2.00"-2.49" (5.08-6.32)
48,000 (213,504)
18" (45.72)
50" (127.00)
⁵⁄₈" (1.59)
Yellow
033021078
2.50"-2.99" (6.35-7.59)
48,000 (213,504)
18" (45.72)
52" (132.08)
⁵⁄₈" (1.59)
Orange
033021079
3.00"-3.49" (7.62-8.86)
48,000 (213,504)
18" (45.72)
50" (127.00)
⁵⁄₈" (1.59)
Aluminum
033021080
3.50"-3.99" (8.89-10.13)
48,000 (213,504)
18" (45.72)
53" (134.62)
⁵⁄₈" (1.59)
Light Green
033021081
Note: E- Eye length. M-Mesh length at nominal diameter.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-7
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Underground K-Type Pulling Grips
Rotating Eye, Double Weave, Galvanized Steel
K-Type Grips
IMPORTANT
Kellems®
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-17 to V-26.
Rotating Eye, K-Type Pulling Grips are made of high strength galvanized steel
strand. All Grips feature double weave mesh for greater strength and added mesh contact
on the table, to handle longer or heavier pulling jobs. The forged eye mates easily with a
swivel or shackle.
E
M
K-Type Grips
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Rotating Eye Dia.
Inches (cm)
Catalog Number
.50"-.62" (1.27-1.57)
5,600 (24,909)
5" (12.70)
11" (27.94)
⁷⁄₈" (2.22)
03301001
.63"-.74" (1.60-1.88)
6,800 (30,246)
5" (12.70)
11" (27.94)
⁷⁄₈" (2.22)
03301002
.75"-.99" (1.90-2.51)
6,800 (30,246)
6" (15.24)
20" (50.80)
1" (2.54)
03301013
1.00"-1.24" (2.54-3.15)
12,800 (56,934)
7" (17.78)
20" (50.80)
1³⁄₈" (3.49)
03301014
1.25"-1.49" (3.17-3.78)
12,800 (56,934)
7" (17.78)
21" (53.34)
1³⁄₈" (3.49)
03301016
1.50"-1.99" (3.81-5.05)
16,400 (72,941)
7" (17.78)
25" (63.50)
1³⁄₈" (3.49)
03301017
2.00"-2.49" (5.08-6.32)
27,200 (120,986)
8" (20.32)
26" (66.04)
1⁵⁄₈" (4.13)
03301018
2.50"-2.99" (6.35-7.59)
33,000 (146,784)
10" (25.40)
28" (71.12)
1⁷⁄₈" (4.76)
03301019
3.00"-3.49" (7.62-8.86)
41,000 (182,368)
10" (25.40)
30" (76.20)
1⁷⁄₈" (4.76)
03301020
3.50"-3.99" (8.89-10.13)
48,000 (213,504)
10" (25.40)
32" (81.28)
1⁷⁄₈" (4.76)
03301021
4.00"-4.49" (10.16-11.40)
48,000 (213,504)
10" (25.40)
33" (83.82)
1⁷⁄₈" (4.76)
033011017
.50"-.62" (1.27-1.57)
5,600 (24,909)
5" (12.70)
16" (40.64)
⁷⁄₈" (2.22)
03301011
.63"-.74" (1.60-1.88)
6,800 (30,246)
5" (12.70)
16" (40.64)
⁷⁄₈" (2.22)
03301012
.75"-.99" (1.90-2.51)
9,600 (42,701)
6" (15.24)
32" (81.28)
1" (2.54)
03301024
1.00"-1.49" (2.54-3.78)
16,400 (72,947)
7" (17.78)
33" (83.82)
1³⁄₈" (3.49)
03301025
1.50"-1.99" (3.81-5.05)
16,400 (72,947)
7" (17.78)
34" (86.36)
1³⁄₈" (3.49)
03301026
2.00"-2.49" (5.08-6.32)
27,200 (120,986)
9" (22.86)
36" (91.44)
1⁵⁄₈" (4.13)
03301027
2.50"-2.99" (6.35-7.59)
33,000 (146,784)
10" (25.40)
38" (96.52)
1⁷⁄₈" (4.76)
03301028
3.00"-3.49" (7.62-8.86)
41,000 (182,368)
10" (25.40)
39" (99.06)
1⁷⁄₈" (4.76)
03301029
3.50"-3.99" (8.89-10.13)
48,000 (213,504)
10" (25.40)
41" (104.14)
1⁷⁄₈" (4.76)
03301030
4.00"-4.49" (10.16-11.40)
48,000 (213,504)
10" (25.40)
42" (106.68)
1⁷⁄₈" (4.76)
03301031
4.50"-4.99" (11.43-12.67)
48,000 (213,504)
10" (25.40)
58" (147.32)
1⁷⁄₈" (4.76)
03301039
5.00"-5.99" (12.70-15.21)
40,000 (177,920)
10" (25.40)
60" (152.40)
1⁷⁄₈" (4.76)
03301047
6.00"-6.99" (15.24-17.75)
48,000 (213,504)
10" (25.40)
66" (167.64)
1⁷⁄₈" (4.76)
03301045
Short
Standard
Note: E- Eye length. M-Mesh length at nominal diameter.
See page V-25 for multiple cables in a single pulling grip.
V-8
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Underground T-Type Pulling Grips
Flexible Eye, Double Weave, Galvanized Steel
T-Type Grips
IMPORTANT
Kellems®
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-17 to V-26.
Flexible T-Type Pulling Grips are made of high strength galvanized steel strand.
They feature double weave mesh for positive holding power in medium to heavy pulling
jobs. The grip eye will easily attach to a swivel.
E
M
T-Type Grips
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Catalog Number
.50"-.62" (1.27-1.57)
4,500 (20,016)
8" (20.32)
21" (53.34)
033041082
.63"-.74" (1.60-1.88)
5,600 (24,909)
8" (20.32)
24" (60.96)
033041083
.75"-.99" (1.90-2.51)
6,800 (30,246)
9" (22.86)
24" (60.96)
033041084
1.00"-1.49" (2.54-3.78)
9,600 (42,701)
9" (22.86)
24" (60.96)
033041085
1.50"-1.99" (3.81-5.05)
16,400 (72,947)
11" (27.94)
24" (60.96)
033041086
2.00"-2.49" (5.08-6.32)
18,500 (82,288)
12" (30.48)
24" (60.96)
033041087
2.50"-2.99" (6.35-7.59)
24,500 (108,976)
12" (30.48)
24" (60.96)
033041088
3.00"-3.49" (7.62-8.86)
24,500 (108,976)
14" (35.56)
24" (60.96)
033041089
3.50"-3.99" (8.89-10.13)
31,000 (137,888)
14" (35.56)
26" (66.04)
033041090
.75"-.99" (1.90-2.51)
6,800 (30,246)
9" (22.86)
36" (91.44)
033041091
1.00"-1.49" (2.54-3.78)
9,600 (42,701)
9" (22.86)
36" (91.44)
033041092
1.50"-1.99" (3.81-5.05)
16,400 (72,947)
11" (27.94)
36" (91.44)
033041093
2.00"-2.49" (5.08-6.32)
18,500 (82,288)
12" (30.48)
36" (91.44)
033041094
2.50"-2.99" (6.35-7.59)
24,500 (108,976)
12" (30.48)
36" (91.44)
033041095
3.00"-3.49" (7.62-8.86)
24,500 (108,976)
14" (35.56)
36" (91.44)
033041096
3.50"-3.99" (8.89-10.13)
31,000 (137,888)
14" (35.56)
40" (101.60)
033041097
Short
Standard
Note: E- Eye length. M-Mesh length at nominal diameter.
See page V-25 for multiple cables in a single pulling grip.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-9
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Special Purpose Pulling Grips
Non-Conductive and Slack Pulling
Non-Conductive Grips
IMPORTANT
Kellems®
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-17 to V-26.
Non-Conductive Pulling Grips, made of a high strength, non-conductive aramid
fiber, are available for pulling single cable or cable bundles. Their braided double weave
design adds strength and positive holding power.
M
E
A
Non-Conductive Grips, Single Eye, Double Weave, Non-Metallic
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
.50"-.62" (1.27-1.57)
4,000 (17,792)
5.5" (13.97)
24" (60.96)
.63"-.74" (1.60-1.88)
5,000 (22,240)
5.5" (13.97)
26" (66.04)
.75"-.99" (1.90-2.51)
6,000 (26,688)
6.0" (15.24)
31" (78.74)
1.00"-1.24" (2.54-3.15)
6,000 (26,688)
6.5" (16.51)
1.25"-1.49" (3.17-3.78)
6,000 (26,688)
1.50"-1.99" (3.815.05)
6,000 (26,688)
A
Inches (cm)
Color Code
Catalog Number
.44" (1.12)
Green
03628001
.44" (1.12)
Yellow
03628002
.63" (1.60)
Red
03628003
36" (91.44)
.63" (1.60)
Blue
03628004
6.7" (17.02)
41.5" (105.41)
.63" (1.60)
White
03628005
8.0" (20.32)
44.0" (121.76)
.63" (1.60)
Pink
03628006
Slack Pulling Grips
Slack Pulling Grips are offered in three styles made of galvanized steel. The closed
type is used when the cable end is accessible. When not accessible, there are
split lace and split rod closing styles. All grips feature a single offset eye for easy
attachment to a pulling line.
M
E
Slack Grip-Closed Mesh, Offset Eye, Double Weave, Galvanized Steel
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Catalog Number
.75"-.99" (1.90-2.51)
2,600 (11,565)
7" (17.78)
12" (30.48)
03308003
1.00"-1.24" (2.54-3.15)
4,000 (17,792)
8" (20.32)
15" (38.10)
03308004
1.25"-1.49" (3.17-3.78)
5,400 (24,019)
8" (20.32)
16" (40.64)
03308005
1.50"-1.74" (3.81-4.42)
6,600 (29,357)
8" (20.32)
20" (50.80)
03308006
1.75"-1.99" (4.44-5.05)
10,000 (44,480)
10" (25.40)
18" (45.72)
03308007
2.00"-2.49" (5.08-6.32)
11,000 (48,928)
10" (25.40)
19" (48.26)
03308008
2.50"-2.99" (6.35-7.59)
11,000 (48,928)
10" (25.40)
20" (50.80)
03308009
3.00"-3.49" (7.62-8.86)
14,500 (64,496)
12" (30.48)
21" (53.34)
03308010
3.50"-3.99" (8.89-10.13)
14,500 (64,496)
12" (30.48)
22" (55.88)
03308011
Standard
Note: E- Eye length. M-Mesh length at nominal diameter.
See page V-25 for multiple cables in a single pulling grip.
V-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Special Purpose Pulling Grips
Slack Pulling
Slack Pulling Grips
IMPORTANT
Slack Pulling Grips are offered in three styles made of galvanized steel. The closed type is
used when the cable end is accessible. When not accessible, there are split lace and split
rod closing styles. All grips feature a single offset eye for easy attachment to a pulling line.
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-17 to V-26.
E
M
Slack Grip-Split Mesh, Rawhide Lace Closing, Offset Eye, Double Weave, Galvanized Steel
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Catalog Number
.75"-.99" (1.90-2.51)
2,500 (11,120)
7" (17.78)
12" (30.48)
03309003
1.00"-1.24" (2.54-3.15)
3,500 (15,568)
8" (20.32)
15" (38.10)
03309004
1.25"-1.49" (3.17-3.78)
4,000 (17,792)
8" (20.32)
16" (40.64)
03309005
1.50"-1.74" (3.81-4.42)
4,000 (17,792)
9" (22.86)
17" (43.18)
03309006
1.75"-1.99" (4.44-5.05)
4,000 (17,792)
10" (25.40)
18" (45.72)
03309007
2.00"-2.49" (5.08-6.32)
4,000 (17,792)
10" (25.40)
19" (48.26)
03309008
2.50"-2.99" (6.35-7.59)
4,000 (17,792)
10" (25.40)
20" (50.80)
03309009
1.50"-1.99" (3.81-5.05)
4,000 (17,792)
9" (22.86)
25" (63.50)
03309015
2.00"-2.49" (5.08-6.32)
4,000 (17,792)
10" (25.40)
26" (66.04)
03309016
2.50"-2.99" (6.35-7.59)
4,000 (17,792)
10" (25.40)
29" (73.66)
03309017
3.00"-3.49" (7.62-8.86)
4,000 (17,792)
12" (30.48)
32" (81.28)
03309018
3.50"-3.99" (8.89-10.13)
4,000 (17,792)
12" (30.48)
35" (88.90)
03309019
M
E
Standard
Long
Slack Grip-Split Mesh, Rod Closing, Offset Eye, Single Weave, Galvanized Steel
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Catalog Number
.50"-.61" (1.27-1.55)
1,500 (6,672)
7" (17.78)
6" (15.24)
03310001
.62"-.74" (1.57-1.88)
1,800 (8,006)
7" (17.78)
8" (20.32)
03310002
.75"-.99" (1.90-2.51)
2,200 (9,786)
7" (17.78)
10" (25.40)
03310003
1.00"-1.24" (2.54-3.15)
3,400 (15,123)
8" (20.32)
12" (30.48)
03310004
1.25"-1.49" (3.17-3.78)
4,500 (20,016)
8" (20.32)
14" (35.56)
03310005
1.50"-1.74" (3.81-4.42)
5,800 (25,798)
9" (22.86)
15" (38.10)
03310006
1.75" -1.99" (4.44-5.05)
7,600 (33,805)
10" (25.40)
16" (40.64)
03310007
2.00"-2.49" (5.08-6.32)
9,000 (40,032)
10" (25.40)
19" (48.26)
03310008
2.50"-2.99" (6.35-7.59)
11,000 (48,928)
10" (25.40)
20" (50.80)
03310009
3.00"-3.49" (7.62-8.86)
12,000 (53,376)
12" (30.48)
21" (53.34)
03310010
3.50"-3.99" (8.89-10.13)
12,000 (53,376)
12" (30.48)
24" (60.96)
03310011
Note: E- Eye length. M-Mesh length at nominal diameter.
See page V-25 for multiple cables in a single pulling grip.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-11
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Low Tension Pulling Grips
Flexible Eye, Single Weave, Galvanized Steel
Light Duty Grips
IMPORTANT
Light Duty Grips are made of galvanized steel in a single weave construction.
They feature a flexible eye for easy attachment to a pulling line.
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-17 to V-26.
M
E
Light Duty Grips
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Catalog Number
.50"-.62" (1.27-1.57)
2,800 (12,454)
5" (12.70)
11" (27.94)
03303001
.63"-.74" (1.60-1.88)
2,800 (12,454)
5" (12.70)
11" (27.94)
03303002
.75"-.99" (1.90-2.51)
4,000 (17,792)
6" (15.24)
12" (30.48)
03303003
1.00"-1.24" (2.54-3.15)
5,300 (23,574)
7" (17.78)
13" (33.02)
03303004
1.25"-1.49" (3.17-3.78)
5,300 (23,574)
7" (17.78)
14" (35.56)
03303005
1.50"-1.74" (3.81-4.42)
6,800 (30,246)
8" (20.32)
15" (38.10)
03303006
1.75"-1.99" (4.44-5.05)
8,500 (37,808)
9" (22.86)
17" (43.18)
03303007
2.00"-2.49" (5.08-6.32)
8,500 (37,808)
9" (22.86)
18" (45.72)
03303008
.50"-.62" (1.27-1.57)
2,800 (12,454)
5" (12.70)
16" (40.64)
03303010
.63"-.74" (1.60-1.88)
2,800 (12,454)
5" (12.70)
16" (40.64)
03303011
.75"-.99" (1.90-2.51)
4,000 (17,792)
6" (15.24)
20" (50.80)
03303012
1.00"-1.24" (2.54-3.15)
6,800 (30,246)
7" (17.78)
20" (50.80)
03303013
1.25"-1.49" (3.17-3.78)
6,800 (30,246)
7" (17.78)
21" (53.34)
03303015
1.50"-1.99" (3.81-5.05)
6,800 (30,246)
8" (20.32)
23" (58.42)
03303016
2.00"-2.49" (5.08-6.32)
8,500 (37,808)
9" (22.86)
25" (63.50)
03303017
2.50"-2.99" (6.35-7.59)
10,600 (47,149)
9" (22.86)
27" (68.58)
03303018
3.00"-3.49" (7.62-8.86)
14,700 (65,386)
10" (25.40)
30" (76.20)
03303019
3.50"-3.99" (8.89-10.13)
14,700 (65,386)
10" (25.40)
32" (81.28)
03303029
Short
Standard
Junior Pulling Grips
Junior Pulling Grips feature a strong galvanized steel, single weave mesh.
A flexible eye easily attaches to a pulling line, snake or fish tape.
M
E
033051114
Junior Pulling Grips
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Model
Catalog Number
.19"-.24" (.48-.61)
400 (1,779)
3¹⁄₄" (8.25)
4¹⁄₄" (10.79)
J19
03305011*
.25"-.37" (.63-.94)
450 (2,002)
3¹⁄₄" (8.25)
4¹⁄₄" (10.79)
J25
03305001
.38"-.49" (.97-1.24)
900 (4,003)
3³⁄₄" (9.52)
7" (17.78)
J37
03305002
.50"-.62" (1.27-1.57)
1,300 (5,782)
4¹⁄₄" (10.79)
8¹⁄₂" (21.59)
J50
03305003
.63"-.74" (1.60-1.88)
1,950 (8,674)
5" (12.70)
10" (25.40)
J62
03305004
.75"-.99" (1.90-2.51)
2,800 (12,454)
5³⁄₄" (14.60)
10" (25.40)
J75
03305005
1.00"-1.24" (2.54-3.15)
3,900 (17,347)
6¹⁄₂" (16.51)
11¹⁄₂" (29.21)
J100
03305006
Junior Grip Kit contains 6 grips, one of each size above, except 03305011.
033051114
Note: E- Eye length. M-Mesh length at nominal diameter.
*Not included in Junior Grip Kit, 033051114.
Note: See page V-25 for multiple cables in a single pulling grip.
See page V-26 for building wire selection chart.
V-12
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Wire Rope Splicing Grips
Triple, Double, Single Weave, Galvanized Steel
Kellems® Wire Rope Grips
IMPORTANT
Wire Rope Grips are made of high strength galvanized steel strand in a construction
of triple, double and single weave for superior gripping ability. They are available with
or without a rotating barrel which will help eliminate twist in the old rope from being
transferred to the new rope.
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-17 to V-26.
Regular Wire Rope Grips
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
Approx. Strength
of Grip Feet (m)
Catalog Number
⁹⁄₁₆"- ⁵⁄₈" (1.43-1.59)
7,500 (33,360)
5.75 (1.75)
03316001
³⁄₄"- ⁷⁄₈" (1.90-2.22)
12,500 (55,600)
6.75 (1.90)
03316002
1"-1¹⁄₈" (2.54-2.86)
16,000 (71,168)
7.00 (2.13)
03316003
1¹⁄₄"- 1³⁄₈" (3.17-3.49)
20,000 (88,960)
8.00 (2.44)
03316004
1³⁄₈"- 1¹⁄₂" (3.49-3.81)
20,000 (88,960)
8.00 (2.44)
03316006
Rotating Wire Rope Grips
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
Approx. Strength
of Grip Feet (m)
Barrel Dimensions
Length. x O.D. In. (cm)
Catalog Number
⁷⁄₁₆"- ¹⁄₂" (1.11-1.27)
5,000 (22,240)
5.33 (1.63)
3.00" (7.62) x .87" (2.21)
03317001
⁹⁄₁₆"- ⁵⁄₈" (1.43-1.59)
7,500 (33,360)
5.83 (1.78)
4.25" (10.79) x 1.00" (2.54)
03317002
³⁄₄"- ⁷⁄₈" (1.90-2.22)
12,500 (55,600)
6.50 (1.98)
4.25" (10.79) x 1.00" (2.54)
03317003
1"- 1¹⁄₈" (2.54-2.86)
16,000 (71,168)
8.67 (2.64)
5.50" (13.97) x 1.37" (3.48)
03317004
1¹⁄₄"- 1³⁄₈" (3.17-3.49)
20,000 (88,960)
9.00 (2.74)
5.50" (13.97) x 1.37" (3.48)
03317005
1¹⁄₂"- 1³⁄₄" (3.81-4.44)
20,000 (88,960)
11.00 (3.35)
5.50" (13.97) x 1.37" (3.48)
03317006
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-13
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Cable Splicing Grips
Double Weave, Galvanized Steel / Single Weave, Galvanized Steel
Splicing Grips
IMPORTANT
Splicing Grips are made of galvanized steel in double weave mesh construction.
They are available in various lengths and sizes to suit most applications.
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-17 to V-26.
Double Weave Tube
Cable Diameter Range
Inches (cm)
.37"-.49"
(.94-1.24)
.50"-.61"
(1.27-1.55)
.62"-.74"
(1.57-1.88)
.75"-.99"
(1.90-2.51)
1.00"-1.49"
(2.54-3.78)
Approx. Breaking
Strength Lbs. (N)
3,500
(15,568)
3,500
(15,568)
4,400
(19,571)
7,500
(33,360)
10,000
(44,480)
Mesh Length
Inches (cm)
Catalog Number
18" (45.72)
013041330
01304064
01304009
—
—
24" (60.96)
—
01304011
01304013
01304010
01304015
36" (91.44)
—
—
013041234
01304054
01304055
48" (121.92)
—
—
—
01304017
01304029
72" (182.88)
—
—
—
01304037
013041333
Junior Splicing Grips, Single Weave
Junior Splicing Grips are made of galvanized steel and are designed for use in very light
duty and small splicing jobs.
Junior Tube
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
Length @ Nom
Diameter Inches (cm)
Catalog Number
.18"-.24" (.46-.61)
400 (1,779)
7" (17.78)
01301008
.25"-.36" (.63-.91)
400 (1,779)
8" (20.32)
01301013
V-14
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Tools and Bands
Pulling Grips Accessories
Punch-Lok® Bands
Punch-Lok Bands are applied over the tail of a grip to prevent the mesh from being tripped or pulled loose.
Also, they assure full gripping action by locking the mesh of the tail in tight contact with the cable or rope.
When the tail of a grip is the leading end, the bands are particularly important to prevent accidental release caused by tripping
on obstructions. A conductor-to-conductor (double-socking) pulling operation is a good example: where two grips connect
two conductors to form a temporary splice. Bands should be applied to the ends of the grips as illustrated herein. It is also
common practice to tape over the banded tail area to assure smooth passage through the sheaves.
The conductor should be installed in the grip up to the elbows of the aluminum shoulders in order to assure full and complete
gripping action as illustrated above.
Punch-Lok® Bands
Grip Banding Range
Inches (cm)
Band Width
Inches (cm)
Band Inside Diameter
Inches (cm)
Model
Catalog Number
¹⁄₄"-1¹⁄₈" (.63-2.86)
³⁄₈" (.95)
1³⁄₈" (3.49)
0-311
20320050
1¹⁄₈"-1⁵⁄₈" (2.86-4.13)
³⁄₈" (.95)
2" (5.08)
0-316
20320051
1⁵⁄₈"-2¹⁄₄" (4.13-5.71)
⁵⁄₈" (1.59)
2¹⁄₂" (6.35)
0-10
20320052
20320053
20320054
2¹⁄₄"-3¹⁄₂" (5.71-8.89)
⁵⁄₈" (1.59)
4" (10.16)
0-16
3¹⁄₂"-5" (8.89-12.70)
⁵⁄₈" (1.59)
6" (15.24)
0-24
20320054
Accessories
Punch-Lok Tools
Catalog Number
P-1000 for use with ⁵⁄₈" width Banding tool.
20320048
P-38 for use with ³⁄₈" and ⁵⁄₈" width Banding tool for tight spaces.
20320047
20320048
Note: In all cases two Punch-Lok Bands should be double wrapped approximately one inch to two inches (2.54cm to 5.08cm) from the grip’s tail.
Banding is required to ensure maximum reliability and guard against accidental release.
20320047
Punch-Lok ® is a registered trademark of Punch-Lok Inc.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-15
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Swivels
Pulling Grips Accessories
Stainless Steel Swivels
IMPORTANT
Swivels are essential to the efficiency and safety of any high tension application. They are
particularly important where continuous pulls develop higher and higher torque levels.
Torque is intensified by the pull-resistance of the cable itself and the resistance of the high
tension controlling equipment regulating line sag.
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-17 to V-26.
Ball bearing swivels release torque and prevent it from reaching dangerous levels that can
damage the cable and obstruct the lines.
Stainless Steel Swivels
20308001A
Maximum Safe
Working Load
Lbs. (N)
Dimensions in Inches (cm)
A
B
C
D
E
F
G
Model
Catalog Number
2,250
(10,000)
⁷⁄₈"
(2.22)
2½"
(6.35)
3³⁄₈"
(8.57)
⁷⁄₁₆"
(1.11)
³⁄₈"
(0.95)
⁵⁄₁₆"
(0.79)
³¹⁄₃₂"
(2.46)
A-13L
20308001A
5,000
(22,240)
1¼"
(3.17)
3¹¹⁄₁₆"
(9.37)
4¾"
(12.06)
1⁷⁄₃₂"
(1.35)
1⁷⁄₃₂"
(1.35)
¹³⁄₃₂"
(1.03)
1⁹⁄₃₂"
(3.25)
BB-13L
20308002A
9,000
(40,030)
1½"
(3.81)
4¼"
(10.79)
5⁵⁄₈"
(14.29)
¹¹⁄₁₆"
(1.75)
1⁹⁄₃₂"
(1.51)
½"
(1.27)
1⁹⁄₁₆"
(3.97)
B-13L
20308003A
10,000
(44,480)
1⁵⁄₈"
(4.13)
4½"
(11.43)
6"
(15.24)
¾"
(1.90)
¹¹⁄₁₆"
(1.75)
⁵⁄₈"
(1.59)
1²³⁄₃₂"
(4.36)
C-13L
20308004A
30,000
(133,440)
2³⁄₈"
(6.03)
7⁵⁄₈"
(19.37)
10"
(25.40)
1³⁄₁₆"
(3.02)
1¹⁄₃₂"
(2.62)
⁷⁄₈"
(2.22)
2²⁵⁄₃₂"
(7.06)
D-13L
20308005A
C
B
A
E
D
F
G
V-16
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Pulling Grips
Kellems Pulling Grips are reusable tools for pulling electrical cable, bare conductor or rope. They are easy and fast to install,
providing the user with a smooth, slim profile that allows for easy passage through ducts and conduit. Kellems Pulling Grips
are made of the highest quality galvanized steel strand which assures the user of a long lasting grip. There is a Kellems Pulling
Grip for every pulling job.
CAUTION: It is very important to comply with all of the following precautions. Failure to do so may result in property damage,
personal injury or death.
1. Pulling grips are to be installed by a qualified individual in accordance with all applicable national and local safety,
electrical and rigging codes.
2. Ensure that the correct grip is selected for your specific needs.
3. Do not use a pulling grip for any application other than pulling cable.
4. Thoroughly examine the grip for damage. Do not use a damaged grip.
5. Ensure that the recommended work load of the grip is suitable for the application. Never use grips at their
approximated rated breaking strength. A safety factor of 5 is recommended for pulling grips.
6. Do not alter grips in any way. For example, do not modify pulling eyes, shoulders, fittings or lugs.
7. Do not attach any type of pulling hardware to any point on the grip other than the pulling eye. The pulling eye is
the only acceptable means of attachment to external hardware.
8. Always apply 2 bands at 1" and 2" respectively, from the tail end of the mesh to guard against accidental release
of the grip. Accidental release can occur if an object contracts and pushes against the tail end of the mesh,
thereby expanding and releasing its hold.
Select The Correct Pulling Grip
Each Kellems Grip is designed to work on a specific range of cable diameters.
Step 1 Refer to the chart below to determine the style of grip best suited for your application.
Step 2 Determine your cable outside diameter.
Step 3 Find the grip size that encompasses your cable diameter.
Step 4 Estimate the tension to be put on the grip, establish the working load you require and compare this to the listed
approximate breaking strength of the grip to insure that the grip will be strong enough. Refer to page V-18 for
safety and working load factors.
Pulling Grip Selection Chart
Grip Style
Application
Page Number
Extra high strength overhead transmission line stringing for bare or
insulated conductor and synthetic rope.
V-6
Multiple strength, flexible eye
Normal overhead transmission and distribution line stringing for bare or
insulated conductor.
V-7
Multiple strength, rotating eye
Normal overhead transmission and distribution line stringing for bare or
insulated conductor.
V-7
K-type grip, rotating eye
Underground power cables and communication lines. Service lines into factories.
V-8
T-type grip, flexible eye
Underground power cables and communication lines. Service lines into factories.
V-9
Non-conductive, flexible eye
Pull insulated distribution cable into place.
V-10
Slack pulling, closed mesh
Remove underground cable. For pulling slack in final placement of new cable
when end of cable is available.
V-10
Slack pulling, split mesh,
Remove underground cable. For pulling slack in final placement of new cable
rawhide lace closing when end of cable is not available.
V-11
Slack pulling, split mesh,
Remove underground cable. For pulling slack in final placement of new cable
rod closing when end of cable is not available, with rod closing for quick installation.
V-11
Light duty, flexible eye
Light pulling, underground electrical construction. Industrial plant
wiring and rewiring jobs.
V-12
Junior, flexible eye
Connect bundled insulated building wire to a pulling tape. Pull wire through conduit.
V-12
Regular and rotating wire rope
Restring wire rope in cranes and oil rigs.
V-13
Splicing
Temporary splice for cable or wire rope.
V-14
Pulling Grip Accessories
Tools, bands, swivels.
V-15, V-16
Fiber Optic Cable Pulling Grips
Pull fiber optic cable into place overhead, underground or through duct and conduit.
V-47, V-48, V-49
DUA-PULL®,
flexible eye
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-17
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Pulling Grips
Safety And Working Load Factors For Wire Mesh Grips
The broad application of Kellems grips on a wide variety of
objects requires that adequate safety factors be used to
establish working loads. The approximate breaking strength
of a Kellems grip represents an average calculation based on
data established from actual direct tension testing done in
our engineering laboratories.
It is impossible to catalog or guarantee a safety factor
suitable for all applications as operating conditions are never
the same. The tension, diameter, movement, number of
objects gripped, gripping surface, and the attachments used
are just some of the factors which vary with each application.
These factors, together with the effects of abrasion,
corrosion, prior use or abuse and any other variables of a
specific application, must be considered by the user and
the grip replaced as appropriate. Where the conditions of
the application are not well defined or known, or where risk
of injury to persons or property is involved, a greater safety
factor should be utilized.
Under normal conditions, Kellems’ recommended
factor of safety is five for catalog listed pulling grips,
and ten for catalog listed support grips.
Any warranty as to quality, performance or fitness for
use of grips is always premised on the condition that the
published breaking strengths apply only to new, unused
grips, and that such products are properly stored, handled,
used, maintained and inspected by the user at a frequency
appropriate for the use and condition of the grip.
Examples
Grip Style
Approx. Breaking
Strength Lbs. (N)
Pulling Grips
27,200 (120,986)
Support Grips
1,610 (7,161)
Safety
Factor
5
10
Max. Recommended
Load Lbs. (N)
5,440 (24,197)
161 (716)
Catalog Number
03301027
02201018
The maximum recommended working load then is the tension to be exerted on the grip in application with a margin of safety
to take care of unforeseen and unusual circumstances.
It is the end-user’s decision to determine how much of a safety factor is acceptable for the application.
The metric unit of measure (force) for breaking strength and load is newtons (N). To convert from newtons to the metric unit
of weight (kilograms) the conversion factor is 9.808 newtons/kilogram.
Pulling Grip Materials
Material
Features
Product Group
Galvanized steel wire
• High strength
• Pulling grips
• Not subject to continuous
outside environment
• Wire rope grips
• Splicing grips
• Superior flex life
• Non-conductive pulling grips
Non-metallic strand
• Non-conductive
• Corrosion resistant
• Moderate strength
Approvals
UL and CSA Certification is indicated on appropriate product catalog pages.
V-18
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Pulling Grips
Overhead Pulling DUA-PULL® Grips
DUA-PULL Pulling Grips are the highest strength pulling grips manufactured for overhead transmission line stringing
applications. They have a dual function of working with both bare and insulated conductors and synthetic rope, not provided
by any other grip. Kellems’ patented two-over, two-under weave design gives exceptional strength and gripping ability by
putting more steel mesh in contact with the cable or rope surfaces.
THIS IS THE ONLY PULLING GRIP RECOMMENDED FOR USE ON SYNTHETIC ROPE.
Application
The DUA-PULL Grips are primarily used in overhead transmission line construction where loads and safety considerations
require an extra high strength grip. They are most commonly used for attaching pulling lines to conductors, conductors to
running boards and “double socking" for conductor-to-conductor connections. The DUA-PULL line accommodates ACSR,
ACAR, all aluminum and copper conductors. Also, the grips accommodate ground wires, messenger strands, wire ropes
and synthetic ropes.
Benefits
•
•
•
•
•
Made of high strength galvanized steel strand.
Recommended for pulling bare or insulated conductor, wire rope and synthetic rope.
DUA-PULL mesh design offers the greatest holding power for all pulling applications.
Each grip size is color coded for fast and accurate identification and selection.
Will mate with swivels. See page V-16.
Feed Tubes
The Kellems Feed Tube is used when assembling synthetic rope into the DUA-PULL Grip. It is required on the largest two
sizes of DUA-PULL Grips. Feed Tubes are available for use on all size DUA-PULL Grips.
Benefits
• Saves time, allowing fast, easy assembly.
• Can be reused if not damaged.
Note: 1. Do not run grips or swivels over bullwheels while under tension.
2. Two Punch-Lok ® bands should be firmly attached approximately 1" and 2" (2.54cm and 5.08cm) from the grip’s tail.
Banding is required to ensure maximum reliability and guard against accidental release. See page V-15.
3. Double braided rope, such as 2-in-1 type, should be back spliced for approximately 2/3 of the mesh length for best gripping results.
Grip size should be selected by diameter of back splice.
Components
Tail
Mesh
Shoulder Protector
End of Conductor
or Rope
Bands
www.hubbell-wiring.com
Identification Sleeve
Color Coded
®
Wiring Device-Kellems
Eye
V-19
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Pulling Grips
Overhead Pulling Multiple Strength Grips
Multiple Strength Pulling Grips are designed for pulling aluminum or copper bare conductor, ground wires, messenger
strands, wire rope and insulated cables. They are made of high strength galvanized steel strand and feature a multi-weave
mesh construction of single, double and triple weave for firm holding power.
Application
Kellems Multiple Strength Grips are ideal for overhead transmission and distribution line stringing where moderate loading
is anticipated. They are economical tools for attaching conductors to pulling lines and double socking for conductor-toconductor connections.
Rotating Eye Feature
Multiple Strength Grips are available with a forged steel rotating eye which can be attached to a swivel. The forged eye is
durable, compact and streamlined and will thread through blocks and sheaves without binding. The rotating eye is not a swivel
and will not turn while under tension; it can turn to relieve pulling torque when tension is relaxed. If constant swivel action is
required, a swivel should be used. For swivel dimensions, see page V-16. For rotating eye dimensions, see page V-21.
Flexible Eye Feature
Multiple Strength Grips are also available with a flexible, patented wire rope eye. This compact eye will mate with a swivel,
and pass through blocks and sheaves without binding.
Benefits
• Economical, high strength pulling tool.
• Multi-weave construction provides greater strength and holding power.
• Endless Weave Grip end lies flat on the cable and will not snag.
Note: 1. Do not run grips or swivels over bullwheels while under tension.
2. Two Punch-Lok ® bands should be firmly attached approximately 1" and 2" (2.54cm and 5.08cm) from the grip’s tail.
Banding is required to ensure maximum reliability and guard against accidental release. See page V-15.
Components
Forged Eye
Shoulder Protectors
Color Coded
Mesh
Tail
End of Conductor
or Cable
Bands
(Double Wrapped)
V-20
®
Wiring Device-Kellems
Flexible Eye
(Patented)
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Pulling Grips
Underground Pulling K-Type and T-Type Grips
K-Type Application
Rotating Eye, K-Type Pulling Grips are specially designed for use in the installation of underground power cables,
communication lines and service lines into factories, shopping centers, construction projects and general underground
electrical construction.
Rotating Eye Feature
K-Type Grips come equipped with a forged steel rotating eye which can be attached to a swivel. The forged eye is durable,
compact and streamlined, and will thread through blocks and sheaves without binding.
The rotating eye is not a swivel and will not turn while under tension; it can turn to relieve pulling torque when the
tension is relaxed. If constant swivel action is required, a swivel should be used. For swivel dimensions, see page V-16.
Benefits
•
•
•
•
An economical tool for pulling cable.
Safe, rugged and dependable.
Equipped with a rotating eye for spin out of pulling torque after load release.
Easily installed and removed.
3/16 R.
B
Rotating Eye Dimensions
F
Rotating Eye
Dimensions
Inches (cm)
A
B
C
D
F
⁷⁄₈" (2.22)
1" (2.54)
1³⁄₈" (3.49)
1⁵⁄₈" (4.13)
1⁷⁄₈" (4.76)
⁷⁄₈" (2.22)
1" (2.54)
1³⁄₈" (3.49)
1⁵⁄₈" (4.13)
1⁷⁄₈" (4.76)
⁹⁄₃₂" (.71)
¹⁄₂" (1.27)
¹⁄₂" (1.27)
⁵⁄₈" (1.59)
²¹⁄₃₂"(1.67)
¹⁄₂" (1.27)
⁹⁄₁₆" (1.43)
¹¹⁄₁₆" (1.75)
⁷⁄₈" (2.22)
1" (2.54)
⁷⁄₈" (2.22)
¹³⁄₁₆" (2.06)
1" (2.54)
1³⁄₁₆" (3.02)
1³⁄₈" (3.49)
2⁵⁄₈" (6.67)
3¹⁄₂" (8.89)
4¹⁄₂" (11.43)
5⁵⁄₁₆" (13.49)
6¹⁄₈" (15.56)
C
A
1/8 R.
D
T-Type
Kellems Flexible T-Type Pulling Grips are made of high strength galvanized steel strand. They feature double weave mesh for
positive holding power in medium to heavy pulling jobs. The grip eye will easily attach to a swivel.
Application
T-Type Pulling Grips are used for the installation of underground power cables, communication lines and service lines into
factories, construction projects and for general underground electrical construction. Available in two mesh lengths, short for
medium pulls, and standard for general purpose pulling.
Benefits
•
•
•
•
•
Will pull a single cable or cable bundles.
Patented flexible eye design provides flexibility to follow line of pull.
A dependable, reusable pulling tool.
Easily installed and removed.
Mates easily with a swivel. See page V-16.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-21
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Pulling Grips
Special Purpose Grips
Non-Conductive Pulling Grips
Kellems Non-Conductive Pulling Grips, made of a high strength, non-conductive aramid fiber, are available for pulling single
cable or cable bundles. Their braided double weave design adds strength and positive holding power.
Application
Kellems Non-Conductive Pulling Grips were developed for use by utilities for pulling overhead distribution lines in close
proximity to energized lines and hardware.
Benefits
•
•
•
•
•
Color coded for fast on-site selection.
Extra flexibility for easy installation.
Non-metallic mesh provides for safe pulls over “hot" areas.
Pellethane jacketed aramid fiber mesh resists abrasion.
Grips are corrosion resistant.
Note: Taping is required to guard against accidental release and to insure maximum reliability. Apply vinyl plastic electrical tape starting 2" to 3" (5.08cm to
7.62cm) from the tail of the grip onto 2" to 3" (5.08cm to 7.62cm) of cable.
Slack Pulling Grips
Slack Pulling Grips are offered in three styles made of galvanized steel. The closed type is used when the cable end is
accessible. When not, there are split lace and split rod closing styles. All grips feature single offset eye for easy attachment to
a pulling line.
Application
Slack Grips are widely used in pulling slack for final placement of under ground cable after it has been pulled in. They are also
used for removing cable. Standard mesh lengths are generally used in restricted space for short pulls. Longer lengths are
used for higher pulling loads where space is not restricted.
Benefits
• Easy attachment to pulling lines.
• Reusable rawhide lace for lace closure.
• Galvanized steel for strength.
Note: 1. Replacement rawhide lace. Catalog number 20920002.
2. See page V-43 for lace and rod closing instructions.
V-22
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Pulling Grips
Commercial Construction/Light Duty Grips
Light Duty Pulling Grips
Light Duty Pulling Grips are made of galvanized steel in a single weave construction. They feature a flexible eye for easy
attachment to a pulling line.
Application
Light Duty Grips are used in general underground electrical construction where pulling tensions are low.
They are easy tools to use in wiring industrial plants and commercial buildings.
Benefits
• Perfect tools for light pulling jobs.
• Installs easily on cable.
• Strong, galvanized steel construction.
Junior Duty Pulling Grips
Junior Pulling Grips feature a strong galvanized steel, single weave mesh. A flexible eye easily attaches to a pulling line,
snake or fish tape.
Application
Designed to pull building wire, Junior grips are safe tools to use in pulling wire at low tension through conduit during
electrical construction.
Benefits
•
•
•
•
Installs easily over building wire.
Strong secure grip.
Reusable.
Pulls single cable or cable bundles.
Junior Grip Kit
Junior Grip Kit contains 6 grips, one of each size. Catalog number 033051114. See page V-12.
Note: See page V-26 for building wire selection chart.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-23
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Splicing Grips
Splicing Grips
Wire Rope Splicing
Kellems Wire Rope Grips are made of high strength galvanized steel strand in a construction of triple, double and single
weave for superior gripping ability. They are available with or without a rotating barrel which will help eliminate twist in
the old rope from being transferred to the new rope.
Application
Wire Rope Grips are used for changing wire rope on oil derricks, large cranes, overhead cranes and drag lines. It provides
a quick, safe, inexpensive temporary splice. By installing the used wire rope in one end and the new rope in the other,
the new wire rope can be pulled in as the old one is pulled out.
Benefits
• High strength for secure pulling.
• Easy installation.
• Flexible to pass through sheaves and blocks.
Note: 1. During installation each end of the grip should be banded and taped down securely over the rope to insure smooth passage through sheaves and to guard
against accidental release. See page V-15 for end bands.
2. The rotating barrel is not a swivel and will not turn while under tension. It can turn to relieve pulling torque when tension is relaxed.
Cable Splicing
Splicing Grips are made of galvanized steel in double or single weave mesh construction. They are available in various
lengths and sizes to suit most applications.
Application
Splicing Grips are used as a temporary splice for rope, cable or wire rope. They can also be used as cable reinforcement,
and can act as a shield to protect cables and hoses from abrasion.
Benefits
• Easily installed or removed.
• Galvanized steel construction for strength.
• Flexible to follow cable path.
Note: 1. During installation, each end of the splicing grip should be banded and taped down securely to the cable to insure smooth passage with the cable and guard
against accidental release.
2. See page V-15 for end bands.
V-24
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Pulling Grips
Multiple Cable Selection Charts for Cables and Wires of Unequal Diameters
How to choose the correct grip size:
1. Find the Grip Circumference Range by measuring the circumference
of the bundle of different diameter cables to be gripped (see illustration).
2. Divide the bundle circumference by 3.14 to determine the diameter.
3. Choose a grip offering a range of cable diameters the same as the
cable diameter.
For Pulling Grips*
CAUTION: When a grip is used on multiple cables, the tail end of the grip should be banded after positioning on the cables.
For Cables of Equal Diameters
Under “Number of Cables in One Grip”, find the diameter of your single cable in vertical column. Read the grip diameter range to the right.
If your diameter is the maximum of the range shown, go to the next larger size for Split Grips, stay with the same size for Closed Grips.
Example: Three cables, each with .89" (2.26cm) diameter, for a Closed Grip select the 1.50"-1.74" (3.81cm-4.42cm) range, for a Split Grip select
the 1.75"-1.99" (4.44cm-5.05cm) range.
Number of Cables in One Grip
2
3
4
5
6 and 7
8
9
Grip Dia.Range
Inches (cm)
.30-.38
(.76-.97)
.25-.31
(.63-.79)
.22-.27
(.56-.69)
.19-.24
(.48-.60)
.17-.22
(.43-.56)
.15-.19
(.38-.48)
.14-.18
(.36-.46)
.50-.61
(1.27-1.55)
.38-.44
(.97-1.12)
.31-.36
(.79-.91)
.27-.31
(.69-.79)
.24-.29
(.61-.74)
.22-.26
(.56-.66)
.19-.23
(.48-.58)
.18-.21
(.46-.53)
.62-.74
(1.57-1.88)
.44-.59
(1.12-1.50)
.36-.49
(.91-1.24)
.31-.42
(.79-1.07)
.29-.38
(.74-.97)
.26-.34
(.66-.86)
.23-.31
(.58-.79)
.21-.28
(.53-.71)
.75-.99
(1.90-2.51)
.59-.75
(1.50-1.90)
.49-.63
(1.24-1.60)
.42-.54
(1.07-1.37)
.38-.48
(.97-1.22)
.34-.43
(.86-1.09)
.31-.39
(.79-.99)
.28-.35
(.71-.89)
1.00-1.24
(2.54-3.15)
.75-.90
(1.90-2.29)
.63-.76
(1.60-1.93)
.54-.65
(1.37-1.65)
.48-.58
(1.22-1.47)
.43-.52
(1.09-1.32)
.39-.46
(.99-1.17)
.35-.42
(.89-1.07)
1.25-1.49
(3.17-3.78)
.90-1.07
(2.29-2.72)
.76-.89
(1.93-2.26)
.65-.77
(1.65-1.96)
.58-.67
(1.47-1.70)
.52-.60
(1.32-1.52)
.46-.54
(1.17-1.37)
.42-.49
(1.07-1.24)
1.50-1.74
(3.81-4.42)
1.07-1.22
(2.72-3.10)
.89-1.02
(2.26-2.59)
.77-.88
(1.96-2.24)
.67-.77
(1.70-1.96)
.60-.69
(1.52-1.75)
.54-.62
(1.37-1.57)
.49-.56
(1.24-1.42)
1.75-1.99
(4.44-5.05)
1.22-1.53
(3.10-3.89)
1.02-1.28
(2.59-3.25)
.88-1.10
(2.24-2.79)
.77-.96
(1.96-2.44)
.69-.86
(1.75-2.18)
.62-.77
(1.57-1.96)
.56-.71
(1.42-1.80)
2.00-2.49
(5.08-6.32)
1.53-1.83
(3.89-4.65)
1.28-1.53
(3.25-3.89)
1.10-1.32
(2.79-3.35)
.96-1.16
(2.44-2.95)
.86-1.03
(2.18-2.62)
.77-.93
(1.96-2.36)
.71-.85
(1.80-2.16)
2.50-2.99
(6.35-7.59)
1.83-2.14
(4.65-5.44)
1.53-1.79
(3.89-4.55)
1.32-1.54
(3.35-3.91)
1.16-1.35
(2.95-3.43)
1.03-1.20
(2.62-3.05)
.93-1.08
(2.36-2.74)
.85-.99
(2.16-2.51)
3.00-3.49
(7.62-8.86)
2.14-2.44
(5.44-6.20)
1.79-2.05
(4.55-5.21)
1.54-1.76
(3.91-4.47)
1.35-1.54
(3.43-3.91)
1.20-1.37
(3.05-3.48)
1.08-1.24
(2.74-3.15)
.99-1.13
(2.51-2.87)
3.50-3.99
(8.89-10.13)
2.44-2.75
(6.20-6.98)
2.05-2.30
(5.21-5.84)
1.76-1.98
(4.47-5.03)
1.54-1.74
(3.91-4.42)
1.37-1.55
(3.48-3.94)
1.24-1.39
(3.15-3.53)
1.13-1.27
(2.87-3.23)
4.00-4.49
(10.16-11.40)
2.75-3.06
(6.98-7.77)
2.30-2.56
(5.84-6.50)
1.98-2.20
(5.03-5.59)
1.74-1.93
(4.42-4.90)
1.55-1.72
(3.94-4.37)
1.39-1.55
(3.53-3.94)
1.27-1.41
(3.23-3.58)
4.50-4.99
(11.43-12.67)
Note: *This chart is not to be used for Conduit Riser Grips. Refer to the chart for Conduit Riser multiple cable section. It is always recommended that, when multiple
cables are installed in a pulling grip, the tail end be banded and tightly taped after installation on the cable bundle. See page V-15 for end bands.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-25
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Junior Pulling Grips
Junior Pulling Grip Selection Chart
These charts are a general guide to assist in the selection of the correct Junior Pulling Grip for pulling various groupings of
building wire. It is not intended to be restrictive inasmuch as the use of “dummy" wires (short pieces of wire used to fill out
the Grip) or the tight taping of the wires into a compact bundle may increase or decrease the number of wires per Grip.
T.H.W.N., T.H.H.N. and X.H.H.W. Building Wire
Cable
Diameter
Range
In. (cm)
Approx.
Breaking
Strength
Lbs. (N)
.25-.36
(.63-.91)
Approximate Number Of Wires In One Grip
#14
#12
#10
#8
#6
#4
#3
#2
#1
#1/0
19 Strand 19 Strand 19 Strand 19 Strand 19 Strand 19 Strand 19 Strand 19 Strand 37 Strand 37 Strand Model
Catalog Number
450
(2,002)
4-8
3-6
2-3
2
1
1
1
—
—
—
J 25
03305001
.37-.49
(.94-1.24)
900
(4,003)
9-16
6-11
4-6
3
2
—
—
1
1
1
J 37
03305002
.50-.61
(1.27-1.55)
1,300
(5,782)
16-25
11-17
7-10
4-5
3-4
2
2
—
—
—
J 50
03305003
.62-.74
(1.57-1.88)
1,950
(8,674)
26-37
18-25
11-14
6-8
5-6
3
3
2
2
—
J 62
03305004
.75-.99
(1.90-2.51)
2,800
(12,454)
37-66
26-47
15-27
9-16
6-11
4-7
4-5
3-4
3
2-3
J 75
03305005
1.00-1.24
(2.54-3.15)
3,900
(17,347)
66-104
47-74
28-43
16-24
11-17
8-10
6-8
5-7
4-5
4
J 100
03305006
R.H.H., R.H., R.W. and R.H.W. Building Wire
Cable
Diameter
Range
In. (cm)
Approx.
Breaking
Strength
Lbs. (N)
.25-.36
(.63-.91)
Approximate Number Of Wires In One Grip
#14
7 Strand
#12
7 Strand
#10
7 Strand
#8
7 Strand
#6
7 Strand
#4
7 Strand
#2
7 Strand
#1
7 Strand
#1/0
19 Strand
Model
Catalog Number
450
(2,002)
2
2
1
1
—
—
—
—
—
J 25
03305001
.37-.49
(.94-1.24)
900
(4,003)
3
2-3
2
—
1
1
1
—
—
J 37
03305002
.50-.61
(1.27-1.55)
1,300
(5,782)
4-5
4-5
3-4
2
—
—
—
1
—
J 50
03305003
.62-.74
(1.57-1.88)
1,950
(8,674)
6-8
6-7
4-5
3
2
2
—
—
1
J 62
03305004
.75-.99
(1.90-2.51)
2,800
(12,454)
9-16
8-14
6-10
4-6
3-4
3-4
2-3
2
—
J 75
03305005
1.00-1.24
(2.54-3.15)
3,900
(17,347)
16-24
15-22
11-16
7-10
5-7
4-6
4
3
2-3
J 100
03305006
T.H.W. Building Wire
Cable
Diameter
Range
In. (cm)
Approx.
Breaking
Strength
Lbs. (N)
.25-.36
(.63-.91)
Approximate Number Of Wires In One Grip
#14
7 Strand
#12
7 Strand
#10
7 Strand
#8
7 Strand
#6
7 Strand
#4
7 Strand
#2
7 Strand
#1
7 Strand
#1/0
19 Strand
Model
Catalog Number
450
(2,002)
2-4
2-3
2
1
1
1
—
—
—
J 25
03305001
.37-.49
(.94-1.24)
900
(4,003)
5-7
4-5
3-4
2
—
—
1
—
—
J 37
03305002
.50-.61
(1.27-1.55)
1,300
(5,782)
8-11
6-8
5-7
3-4
2
2
—
1
1
J 50
03305003
.62-.74
(1.57-1.88)
1,950
(8,674)
12-16
9-12
8-10
5-6
3-4
3
2
—
—
J 62
03305004
.75-.99
(1.90-2.51)
2,800
(12,454)
17-30
13-24
11-19
7-10
5-7
4-5
3-4
2
2
J 75
03305005
1.00-1.24
(2.54-3.15)
3,900
(17,347)
31-48
25-37
20-30
11-17
8-11
6-8
5-6
3-4
3
J 100
03305006
V-26
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Support Grips - Heavy Duty, Standard Duty, Light Duty
Tin-Coated Bronze/Stainless Steel
Solid eye assemblies provide eye reinforcement at support hardware
Four eye styles available: single (shown), double, universal, and offset
Identification tag shows: catalog number, diameter range,
agency approval, and bar code
The strand equalizer positions wires for equal loading throughout the
entire grip length
The positive action mesh grip is designed for light duty up to heavy duty.
Closed grips fit over the cable end, split grips wrap around the cable mid-span.
The standard material is nonmagnetic, tin-coated bronze. Selected items are
available in stainless steel. For exceptional immunity to rust and corrosion with
superior strength and flexibility for heavy duty support application in harsh
environments; contact the factory
The endless weave provides easy installation onto cable and can be
easily repositioned
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-27
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Standard Duty Support Grips
Single Eye, Single Weave, Tin-Coated Bronze and Stainless Steel
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 to V-45.
Single Eye, Closed Mesh
For permanent support when cable end is available to be installed through grip.
E
M
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze
Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
.50"-.62" (1.27-1.57)
530 (2,357)
1,370 (6,094)
7" (17.78)
10" (25.40)
02201013
02401013
.63"-.74" (1.60-1.88)
790 (3,514)
2,060 (9,163)
8" (20.32)
10" (25.40)
02201014
02401014
.75"-.99" (1.90-2.51)
1,020 (4,537)
2,060 (9,163)
8" (20.32)
13" (33.02)
02201015
02401015
1.00"-1.24" (2.54-3.15)
1,610 (7,161)
2,678 (11,912)
9" (22.86)
14" (35.56)
02201017
02401017
1.25"-1.49" (3.17-3.78)
1,610 (7,161)
4,490 (19,972)
10" (25.40)
15" (38.10)
02201018
02401018
1.50"-1.74" (3.81-4.42)
1,610 (7,161)
4,492 (19,981)
12" (30.48)
17" (43.18)
02201019
02401019
1.75"-1.99" (4.44-5.05)
2,150 (9,563)
5,000 (22,241)
14" (35.56)
19" (48.26)
02201020
02401020
2.00"-2.49" (5.08-6.32)
3,260 (14,500)
8,940 (39,767)
16" (40.64)
21" (53.34)
02201021
02401021
2.50"-2.99" (6.35-7.59)
3,260 (14,500)
8,947 (39,798)
18" (45.72)
23" (58.42)
02201022
02401022
3.00"-3.49" (7.62-8.86)
4,900 (21,795)
13,420 (59,695)
21" (53.34)
25" (63.50)
02201023
02401023
3.50"-3.99" (8.89-10.13)
4,900 (21,795)
24" (60.96)
27" (68.58)
02201024
—
—
Single Eye, Split Mesh, Lace Closing
For permanent support when cable end is not available.
E
M
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze
Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
.50"-.62" (1.27-1.57)
530 (2,357)
1,370 (6,094)
7" (17.78)
10" (25.40)
02202013
02402013
.63"-.74" (1.60-1.88)
790 (3,514)
2,066 (9,190)
8" (20.32)
10" (25.40)
02202014
02402014
.75"-.99" (1.90-2.51)
1,020 (4,537)
2,060 (9,163)
8" (20.32)
13" (33.02)
02202015
02402015
1.00"-1.24" (2.54-3.15)
1,610 (7,161)
2,670 (11,876)
9" (22.86)
14" (35.56)
02202017
02402017
1.25"-1.49" (3.17-3.78)
1,610 (7,161)
4,490 (19,972)
10" (25.40)
15" (38.10)
02202018
02402018
1.50"-1.74" (3.81-4.42)
1,610 (7,161)
4,490 (19,972)
12" (30.48)
17" (43.18)
02202019
02402019
1.75"-1.99" (4.44-5.05)
2,150 (9,563)
4,375 (19,461)
14" (35.56)
19" (48.26)
02202020
02402020
2.00"-2.49" (5.08-6.32)
3,260 (14,500)
8,947 (39,798)
16" (40.64)
21" (53.34)
02202021
02402021
2.50"-2.99" (6.35-7.59)
3,260 (14,500)
8,940 (39,767)
18" (45.72)
23" (58.42)
02202022
02402022
3.00"-3.49" (7.62-8.86)
4,900 (21,795)
13,420 (59,695)
21" (53.34)
25" (63.50)
02202023
02402023
3.50"-3.99" (8.89-10.13)
4,900 (21,795)
13,420 (59,695)
24" (60.96)
27" (68.58)
02202024
02402024
Single Eye, Split Mesh, Rod Closing
For support when cable end is not available.
E
M
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze
Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
.50"-.62" (1.27-1.57)
790 (3,514)
1,050 (4,670)
7" (17.78)
8.5" (21.59)
02203013
02403013
.63"-.74" (1.60-1.88)
790 (3,514)
2,050 (9,119)
8" (20.32)
8.5" (21.59)
02203014
02403014
.75"-.99" (1.90-2.51)
1,020 (4,537)
2,050 (9,119)
8" (20.32)
10.5" (26.67)
02203015
02403015
1.00"-1.24" (2.54-3.15)
1,610 (7,161)
2,650 (11,788)
9" (22.86)
12.5" (31.75)
02203017
02403017
1.25"-1.49" (3.17-3.78)
1,610 (7,161)
4,500 (20,017)
10" (25.40)
14.5" (36.83)
02203018
02403018
1.50"-1.74" (3.81-4.42)
1,610 (7,161)
4,500 (20,017)
12" (30.48)
15.5" (39.37)
02203019
02403019
1.75"-1.99" (4.44-5.05)
2,150 (9,563)
6,000 (26,689)
14" (35.56)
16.5" (41.91)
02203020
02403020
2.00"-2.49" (5.08-6.32)
3,260 (14,500)
8,950 (39,812)
16" (40.64)
19.5" (49.53)
02203021
02403021
2.50"-2.99" (6.35-7.59)
3,260 (14,500)
7,750 (34,474)
18" (45.72)
21.5" (54.61)
02203022
02403022
3.00"-3.49" (7.62-8.86)
5,750 (25,576)
8,500 (37,810)
21" (53.34)
23.5" (59.69)
02203023
02403023
3.50"-3.99" (8.89-10.13)
5,750 (25,576)
24" (60.96)
25.5" (64.77)
02203024
—
—
Note: E-Eye length. M-Mesh length at nominal diameter.
V-28
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Standard Duty Support Grips
Double Eye, Single Weave, Tin-Coated Bronze and Stainless Steel
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 to V-45.
Double Eye, Closed Mesh
For permanent support when cable end is available to be installed through grip.
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze
Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
.50"-.62" (1.27-1.57)
530 (2,357)
1,370 (6,094)
4" (10.16)
10" (25.40)
02201001
02401001
.63"-.74" (1.60-1.88)
790 (3,514)
2,060 (9,163)
4" (10.16)
10" (25.40)
02201002
02401002
.75"-.99" (1.90-2.51)
1,020 (4,537)
2,060 (9,163)
4" (10.16)
13" (33.02)
02201003
02401003
1.00"-1.24" (2.54-3.15)
1,610 (7,161)
2,670 (11,877)
5" (12.70)
14" (35.56)
02201005
02401005
1.25"-1.49" (3.17-3.78)
1,610 (7,161)
4,490 (19,972)
5" (12.70)
15" (38.10)
02201006
02401006
1.50"-1.74" (3.81-4.42)
1,610 (7,161)
4,490 (19,972)
5" (12.70)
17" (43.18)
02201007
02401007
1.75"-1.99" (4.44-5.05)
2,150 (9,563)
5,000 (22,241)
6" (15.24)
19" (48.26)
02201008
02401008
2.00"-2.49" (5.08-6.32)
3,260 (14,500)
8,940 (39,767)
6" (15.24)
21" (53.34)
02201009
02401009
2.50"-2.99" (6.35-7.59)
3,260 (14,500)
8,940 (39,767)
6" (15.24)
23" (58.42)
02201010
02401010
3.00"-3.49" (7.62-8.86)
4,900 (21,795)
12,000 (53,379)
8" (20.32)
25" (63.50)
02201011
02401011
3.50"-3.99" (8.89-10.13)
4,900 (21,795)
12,000 (53,379)
8" (20.32)
27" (68.58)
02201012
02401012
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
4" (10.16)
10" (25.40)
02202001
—
E
M
Double Eye, Split Mesh, Lace Closing
For permanent support when cable end is not available.
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze
.50"-.62" (1.27-1.57)
530 (2,357)
.63"-.74" (1.60-1.88)
790 (3,514)
2,066 (9,190)
4" (10.16)
10" (25.40)
02202002
02402002
.75"-.99" (1.90-2.51)
1,020 (4,537)
2,060 (9,163)
4" (10.16)
13" (33.02)
02202003
02402003
1.00"-1.24" (2.54-3.15)
1,610 (7,161)
2,678 (11,912)
5" (12.70)
14" (35.56)
02202005
02402005
1.25"-1.49" (3.17-3.78)
1,610 (7,161)
4,490 (19,972)
5" (12.70)
15" (38.10)
02202006
02402006
1.50"-1.74" (3.81-4.42)
1,610 (7,161)
3,750 (16,681)
5" (12.70)
17" (43.18)
02202007
02402007
1.75"-1.99" (4.44-5.05)
2,150 (9,563)
5,000 (22,241)
6" (15.24)
19" (48.26)
02202008
02402008
2.00"-2.49" (5.08-6.32)
3,260 (14,500)
8,940 (39,767)
6" (15.24)
21" (53.34)
02202009
02402009
2.50"-2.99" (6.35-7.59)
3,260 (14,500)
—
6" (15.24)
23" (58.42)
02202010
—
3.00"-3.49" (7.62-8.86)
4,900 (21,795)
—
8" (20.32)
25" (63.50)
02202011
—
3.50"-3.99" (8.89-10.13)
4,900 (21,795)
—
8" (20.32)
27" (68.58)
02202012
—
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
4" (10.16)
6.5"
02203001
—
Stainless Steel
—
E
M
Double Eye, Split Mesh, Rod Closing
For support when cable end is not available.
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze
.50"-.62" (1.27-1.57)
790 (3,514)
.63"-.74" (1.60-1.88)
790 (3,514)
2,050 (9,119)
4" (10.16)
8.5" (21.59)
02203002
02403002
.75"-.99" (1.90-2.51)
1,020 (4,537)
2,050 (9,119)
4" (10.16)
10.5" (26.67)
02203003
02403003
1.00"-1.24" (2.54-3.15)
1,610 (7,161)
2,650 (11,788)
5" (12.70)
12.5" (31.75)
02203005
02403005
1.25"-1.49" (3.17-3.78)
1,610 (7,161)
3,750 (16,681)
5" (12.70)
14.5" (36.83)
02203006
02403006
1.50"-1.74" (3.81-4.42)
1,610 (7,161)
3,750 (16,681)
5" (12.70)
15.5" (39.37)
02203007
02403007
1.75"-1.99" (4.44-5.05)
2,150 (9,563)
5,000 (22,241)
6" (15.24)
16.5" (41.91)
02203008
02403008
2.00"-2.49" (5.08-6.32)
3,260 (14,500)
8,950 (39,812)
6" (15.24)
19.5" (49.53)
02203009
02403009
2.50"-2.99" (6.35-7.59)
3,260 (14,500)
8,950 (39,812)
6" (15.24)
21.5" (54.61)
02203010
02403010
3.00"-3.49" (7.62-8.86)
5,750 (25,576)
11,150 (49,598)
8" (20.32)
23.5" (59.69)
02203011
02403011
3.50"-3.99" (8.89-10.13)
5,750 (25,576)
8" (20.32)
25.5" (64.77)
02203012
—
Stainless Steel
—
—
Stainless Steel
E
M
Note: E-Eye length. M-Mesh length at nominal diameter.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-29
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Standard Duty Support Grips
Offset Eye, Single Weave, Tin-Coated Bronze and Stainless Steel
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 to V-45.
Offset Eye, Closed Mesh
For permanent support when cable end is available to be installed through grip.
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze
Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
.50"-.62" (1.27-1.57)
530 (2,357)
1,370 (6,094)
4" (10.16)
10" (25.40)
02201037
02401037
.63"-.74" (1.60-1.88)
750 (3,336)
1,950 (8,674)
4" (10.16)
10" (25.40)
02201038
02401038
.75"-.99" (1.90-2.51)
950 (4,226)
2,060 (9,163)
4" (10.16)
13" (33.02)
02201039
02401039
1.00"-1.24" (2.54-3.15)
1,500 (6,672)
2,678 (11,912)
5" (12.70)
14" (35.56)
02201041
02401041
1.25"-1.49" (3.17-3.78)
1,500 (6,672)
4,490 (19,972)
5" (12.70)
15" (38.10)
02201042
02401042
1.50"-1.74" (3.81-4.42)
1,500 (6,672)
3,700 (16,458)
5" (12.70)
17" (43.18)
02201043
02401043
1.75"-1.99" (4.44-5.05)
2,000 (8,896)
4,375 (19,461)
6" (15.24)
19" (48.26)
02201044
02401044
2.00"-2.49" (5.08-6.32)
3,100 (13,789)
5,500 (24,465)
9" (22.86)
21" (53.34)
02201045
02401045
2.50"-2.99" (6.35-7.59)
3,100 (13,789)
—
9" (22.86)
23" (58.42)
02201046
—
3.00"-3.49" (7.62-8.86)
3,800 (16,902)
—
11" (27.94)
25" (63.50)
02201047
—
3.50"-3.99" (8.89-10.13)
3,250 (14,480)
—
11" (27.94)
27" (68.58)
02201048
—
Offset Eye, Split Mesh, Lace Closing
For permanent support when cable end is not available.
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze
Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
.50"-.62" (1.27-1.57)
500 (2,224)
1,370 (6,094)
4" (10.16)
10" (25.40)
02202037
02402037
.63"-.74" (1.60-1.88)
750 (3,336)
1,952 (8,683)
4" (10.16)
10" (25.40)
02202038
02402038
.75"-.99" (1.90-2.51)
950 (4,226)
2,060 (9,163)
4" (10.16)
13" (33.02)
02202039
02402039
1.00"-1.24" (2.54-3.15)
1,500 (6,672)
2,670 (11,877)
5" (12.70)
14" (35.56)
02202041
02402041
1.25"-1.49" (3.17-3.78)
1,500 (6,672)
4,490 (19,972)
5" (12.70)
15" (38.10)
02202042
02402042
1.50"-1.74" (3.81-4.42)
1,500 (6,672)
4,490 (19,972)
5" (12.70)
17" (43.18)
02202043
02402043
1.75"-1.99" (4.44-5.05)
1,800 (8,006)
4,375 (19,461)
6" (15.24)
19" (48.26)
02202044
02402044
2.00"-2.49" (5.08-6.32)
2,150 (9,563)
5,500 (24,465)
9" (22.86)
21" (53.34)
02202045
02402045
2.50"-2.99" (6.35-7.59)
2,150 (9,563)
5,500 (24,465)
9" (22.86)
23" (58.42)
02202046
02402046
3.00"-3.49" (7.62-8.86)
3,250 (14,480)
10,190 (45,327)
11" (27.94)
25" (63.50)
02202047
02402047
3.50"-3.99" (8.89-10.13)
3,250 (14,480)
11" (27.94)
27" (68.58)
02202048
—
—
Offset Eye, Split Mesh, Rod Closing
For support when cable end is not available.
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze
Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
.50"-.62" (1.27-1.57)
500 (2,224)
1,000 (4,448)
4" (10.16)
7" (17.78)
02203037
02403037
.63"-.74" (1.60-1.88)
750 (3,336)
1,950 (8,674)
4" (10.16)
9" (22.86)
02203038
02403038
.75"-.99" (1.90-2.51)
950 (4,226)
1,950 (8,674)
4" (10.16)
10" (25.40)
02203039
02403039
1.00"-1.24" (2.54-3.15)
1,500 (6,672)
2,500 (11,121)
5" (12.70)
12" (30.48)
02203041
02403041
1.25"-1.49" (3.17-3.78)
1,500 (6,672)
4,200 (18,683)
5" (12.70)
14" (35.56)
02203042
02403042
1.50"-1.74" (3.81-4.42)
1,500 (6,672)
4,500 (20,017)
5" (12.70)
15" (38.10)
02203043
02403043
1.75"-1.99" (4.44-5.05)
2,000 (8,896)
4,375 (19,461)
6" (15.24)
16" (40.64)
02203044
02403044
2.00"-2.49" (5.08-6.32)
3,100 (13,789)
8,350 (37,143)
9" (22.86)
19" (48.26)
02203045
02403045
2.50"-2.99" (6.35-7.59)
3,100 (13,789)
9" (22.86)
20" (50.80)
02203046
—
3.00"-3.49" (7.62-8.86)
4,300 (19,126)
11" (27.94)
21" (53.34)
02203047
02403047
3.50"-3.99" (8.89-10.13)
4,900 (21,795)
11" (27.94)
21" (53.34)
02203048
—
—
8,400 (37,365)
—
Note: E-Eye length. M-Mesh length at nominal diameter.
V-30
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Standard Duty Support Grips
Universal Eye, Single Weave, Tin-Coated Bronze and Stainless Steel
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 to V-45.
Universal Eye, Closed Mesh
For permanent support when cable end is available to be installed through grip.
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze Stainless Steel
.50"-.62" (1.27-1.57)
530 (2,357)
1,370 (6,094)
.63"-.74" (1.60-1.88)
790 (3,514)
2,060 (9,163)
.75"-.99" (1.90-2.51)
1,020 (4,537)
2,066 (9,190)
1.00"-1.24" (2.54-3.15)
1,610 (7,161)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
18" (45.72
10" (25.40)
02201051
02401051
18" (45.72)
10" (25.40)
02201052
02401052
18" (45.72)
13" (33.02)
02201053
02401053
18" (45.72)
14" (35.56)
02201050
—
1.25"-1.49" (3.17-3.78)
1,610 (7,161)
1.50"-1.74" (3.81-4.42)
1,610 (7,161)
4,490 (19,972)
18" (45.72)
15" (38.10)
02201054
02401054
4,490 (19,972)
18" (45.72)
17" (43.18)
02201055
02401055
1.75"-1.99" (4.44-5.05)
2,150 (9,563)
—
2.00"-2.49" (5.08-6.32)
3,260 (14,500)
—
18" (45.72)
19" (48.26)
02201056
02401056
18" (45.72)
21" (53.34)
02201057
02401057
2.50"-2.99" (6.35-7.59)
3,260 (14,500)
—
18" (45.72)
23" (58.42)
02201058
02401058
Stainless Steel
—
E
Inches (cm)
Universal Eye, Split Mesh, Lace Closing
For permanent support when cable end is not available.
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
.50"-.62" (1.27-1.57)
530 (2,357)
18" (45.72
10" (25.40)
02202050
—
.63"-.74" (1.60-1.88)
790 (3,514)
18" (45.72)
10" (25.40)
02202051
02402051
.75"-.99" (1.90-2.51)
1,020 (4,537)
—
18" (45.72)
13" (33.02)
02202052
—
1.00"-1.24" (2.54-3.15)
1,610 (7,161)
—
18" (45.72)
14" (35.56)
02202054
—
1.25"-1.49" (3.17-3.78)
1,610 (7,161)
—
18" (45.72)
15" (38.10)
02202055
—
1.50"-1.74" (3.81-4.42)
1,610 (7,161)
—
18" (45.72)
17" (43.18)
02202056
—
1.75"-1.99" (4.44-5.05)
2,150 (9,563)
—
18" (45.72)
19" (48.26)
02202057
—
2.00"-2.49" (5.08-6.32)
3,260 (14,500)
—
18" (45.72)
21" (53.34)
02202058
—
2.50"-2.99" (6.35-7.59)
3,260 (14,500)
—
18" (45.72)
23" (58.42)
02202059
—
3.50"-3.99" (8.89-10.13)
4,900 (21,795)
—
18" (45.72)
27" (68.58)
02202061
—
—
2,060 (9,163)
Universal Eye, Split Mesh, Rod Closing
For support when cable end is not available.
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
.50"-.62" (1.27-1.57)
790 (3,514)
18" (45.72
8.5" (21.59)
02203064
—
.63"-.74" (1.60-1.88)
790 (3,514)
2,050 (9,119)
18" (45.72)
8.5" (21.59)
02203065
02403065
.75"-.99" (1.90-2.51)
1,020 (4,537)
2,050 (9,119)
18" (45.72)
10.5" (26.67)
02203066
02403066
1.00"-1.24" (2.54-3.15)
1,610 (7,161)
2,650 (11,788)
18" (45.72)
12.5" (31.75)
02203068
02403068
1.25"-1.49" (3.17-3.78)
1,610 (7,161)
4,500 (20,017)
18" (45.72)
14.5" (36.83)
02203069
02403069
1.50"-1.74" (3.81-4.42)
1,610 (7,161)
4,500 (20,017)
18" (45.72)
15.5" (39.37)
02203070
02403070
1.75"-1.99" (4.44-5.05)
2,150 (9,563)
—
18" (45.72)
16.5" (41.91)
02203071
—
2.00"-2.49" (5.08-6.32)
3,260 (14,500)
—
18" (45.72)
19.5" (49.53)
02203072
—
2.50"-2.99" (6.35-7.59)
3,260 (14,500)
—
18" (45.72)
21.5" (54.61)
02203073
—
3.00"-3.49" (7.62-8.86)
5,750 (25,576)
—
18" (45.72)
23.5" (59.69)
02203074
—
—
Stainless Steel
Note: E-Eye length. M-Mesh length at nominal diameter.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-31
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Heavy Duty Support Grips
Single Eye, Double Weave, Tin-Coated Bronze and Stainless Steel
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 to V-45.
Heavy Duty, Single Eye, Closed Mesh
For heavy duty permanent support when cable end is available to be installed through grip.
Cable Diameter Range
Inches (cm)
Approx. Breaking Strength Lbs. (N)
Tin-Coated Bronze
Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
.75"-.99"
(1.90-2.51)
2,820 (12,543)
4,200 (18,683)
10" (25.40)
25" (63.50)
02206010
02406010
1.00"-1.24"
(2.54-3.15)
4,280 (19,037)
7,300 (32,472)
12" (30.48)
28" (71.12)
02206011
02406011
1.25"-1.49"
(3.17-3.78)
4,280 (19,037)
7,300 (32,472)
12" (30.48)
30" (76.20)
02206012
02406012
1.50"-1.99"
(3.81-5.05)
4,280 (19,037)
11,150 (49,598)
12" (30.48)
34" (86.36)
02206013
02406013
Single Eye, Split Mesh, Lace Closing
For permanent support when cable end is not available to be installed through grip.
Cable Diameter Range
Inches (cm)
Approx. Breaking Strength Lbs. (N)
Tin-Coated Bronze
Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
.75"-.99"
(1.90-2.51)
2,820 (12,543)
4,200 (18,683)
10" (25.40)
25" (63.50)
02207010
02407010
1.00"-1.24"
(2.54-3.15)
4,280 (19,037)
7,300 (32,472)
12" (30.48)
28" (71.12)
02207011
02407011
1.25"-1.49"
(3.17-3.78)
4,280 (19,037)
7,300 (32,472)
12" (30.48)
30" (76.20)
02207012
02407012
1.50"-1.99"
(3.81-5.05)
4,280 (19,037)
11,150 (49,598)
12" (30.48)
34" (86.36)
02207013
02407013
Note: E-Eye length. M-Mesh length at nominal diameter.
V-32
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Heavy Duty Support Grips
Double Eye, Double Weave, Tin-Coated Bronze and Stainless Steel
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 to V-45.
Double Eye, Closed Mesh
For permanent support when cable end is available to be installed through grip.
Approx. Breaking Strength Lbs. (N)
Cable Diameter
Range Inches (cm) Tin-Coated Bronze Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
.75"-.99"
(1.90-2.51)
2,820 (12,543)
4,250 (18,905)
10" (25.40)
25" (63.50)
02206001
02406001
1.00"-1.24"
(2.54-3.15)
4,280 (19,037)
7,300 (32,472)
10" (25.40)
28" (71.12)
02206002
02406002
1.25"-1.49"
(3.17-3.78)
4,280 (19,037)
7,300 (32,472)
10" (25.40)
30" (76.20)
02206003
02406003
1.50"-1.99"
(3.81-5.05)
4,280 (19,037)
11,100 (49,375)
10" (25.40)
34" (86.36)
02206004
02406004
2.00"-2.49"
(5.08-6.32)
8,050 (35,806)
20,100 (89,409)
12" (30.48)
36" (91.44)
02206005
02406005
2.50"-2.99"
(6.35-7.59)
8,050 (35,806)
20,100 (89,409)
12" (30.48)
38" (96.52)
02206006
02406006
3.00"-3.49"
(7.62-8.86)
10,060 (44,747)
25,200 (112,095)
12" (30.48)
40" (101.60)
02206007
02406007
3.50"-3.99"
(8.89-10.13)
12,070 (53,687)
—
12" (30.48)
44" (111.76)
02206008
—
4.00"-4.49"
(10.16-11.40)
12,070 (53,687)
—
12" (30.48)
46" (116.84)
02206009
—
4.50"-4.99"
(11.43-12.67)
12,070 (53,687)
—
12" (30.48)
68" (172.72)
02208009
—
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
Double Eye, Split Mesh, Lace Closing
For support when cable end is not available.
Approx. Breaking Strength Lbs. (N)
Cable Diameter
Range Inches (cm) Tin-Coated Bronze Stainless Steel
.75"-.99"
(1.90-2.51)
2,820 (12,543)
4,250 (18,905)
10" (25.40)
25" (63.50)
02207001
02407001
1.00"-1.24"
(2.54-3.15)
4,280 (19,037)
7,300 (32,472)
10" (25.40)
28" (71.12)
02207002
02407002
1.25"-1.49"
(3.17-3.78)
4,280 (19,037)
7,300 (32,472)
10" (25.40)
30" (76.20)
02207003
02407003
1.50"-1.99"
(3.81-5.05)
4,280 (19,037)
11,150 (49,598)
10" (25.40)
34" (86.36)
02207004
02407004
2.00"-2.49"
(5.08-6.32)
8,050 (35,806)
20,150 (89,632)
12" (30.48)
36" (91.44)
02207005
02407005
2.50"-2.99"
(6.35-7.59)
8,050 (35,806)
20,150 (89,632)
12" (30.48)
38" (96.52)
02207006
02407006
3.00"-3.49"
(7.62-8.86)
10,060 (44,747)
25,200 (112,095)
12" (30.48)
40" (101.60)
02207007
02407007
3.50"-3.99"
(8.89-10.13)
12,070 (53,687)
30,200 (134,336)
12" (30.48)
44" (111.76)
02207008
02407008
4.00"-4.49"
(10.16-11.40)
12,070 (53,687)
30,200 (134,336)
12" (30.48)
46" (116.84)
02207009
02407009
4.50"-4.99"
(11.43-12.67)
12,070 (53,687)
12" (30.48)
68" (172.72)
02209009
—
—
Note: E-Eye length. M-Mesh length at nominal diameter.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-33
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Service Drop Grips
Single Eye, Tin-Coated Bronze and Stainless Steel
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 to V-45.
Light Duty, Single Eye, Closed Mesh, Single Weave
For permanent support when cable end is available to be installed.
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze
Stainless Steel
E
Inches (cm)
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
.23"-.31" (.58-.79)
290 (1,290)
700 (3,114)
3" (7.62)
3.75" (9.52)
02216001
02416001
.29"-.37" (.74-.94)
290 (1,290)
700 (3,114)
5" (12.70)
4.25" (10.79)
02216002
02416002
.35"-.44" (.89-1.12)
500 (2,224)
850 (3,781)
5.5" (13.97)
4.75" (12.06)
02216003
02416003
.41"-.50" (1.04-1.27)
500 (2,224)
850 (3,781)
5.5" (13.97)
5" (12.70)
02216004
02416004
.46"-.56" (1.17-1.42)
660 (2,936)
850 (3,781)
6" (15.24)
5.25" (13.33)
02216005
02416005
.52"-.62" (1.32-1.57)
790 (3,514)
1,050 (4,670)
7" (17.78)
6.25" (15.87)
02216006
02416006
.58"-.68" (1.47-1.73)
790 (3,514)
1,050 (4,670)
7" (17.78)
6¹⁄⁄" (16.51)
02216007
02416007
.64"-.75" (1.63-1.90)
790 (3,514)
1,050 (4,670)
7" (17.78)
6.75" (17.14)
02216008
02416008
.70"-.81" (1.78-2.06)
790 (3,514)
2,050 (9,119)
7" (17.78)
7.25" (18.41)
02216009
02416009
.75"-.87" (1.90-2.21)
1,020 (4,537)
2,050 (9,119)
8" (20.32)
8" (20.32)
02216010
02416010
.81"-.94" (2.06-2.39)
1,020 (4,537)
2,050 (9,119)
02416011
.87"-1.00" (2.21-2.54)
1,020 (4,537)
.94"-1.06" (2.39-2.69)
1,020 (4,537)
1.00"-1.18" (2.54-3.00)
1.06"-1.25" (2.69-3.17)
8" (20.32)
8.25" (20.95)
02216011
8" (20.32)
8.75" (22.22)
02216012
—
2,050 (9,119)
9" (22.86)
9" (22.86)
02216013
02416013
1,020 (4,537)
2,050 (9,119)
9" (22.86)
9.5" (24.13)
02216014
02416014
1,020 (4,537)
2,050 (9,119)
9" (22.86)
9.5" (24.13)
02216015
02416015
M
Inches (cm)
Tin-Coated
Bronze
Stainless Steel
02417001
—
Heavy Duty, Single Eye, Closed Mesh, Multi-Weave
For permanent support when cable end is available to be installed.
Approx. Breaking Strength Lbs. (N)
Cable Diameter Range
Inches (cm)
Tin-Coated Bronze
Stainless Steel
E
Inches (cm)
.23"-.31" (.58-.79)
500 (2,224)
1,400 (6,228)
5" (12.70)
4.5" (11.43)
02217001
.29"-.37" (.74-.94)
500 (2,224)
1,150 (5,115)
5" (12.70)
5.5" (13.97)
02217002
02417002
.35"-.44" (.89-1.12)
870 (3,870)
1,700 (7,562)
6" (15.24)
6.5" (16.51)
02217003
02417003
.41"-.50" (1.04-1.27)
870 (3,870)
1,700 (7,562)
6" (15.24)
7.5" (19.05)
02217004
02417004
.46"-.56" (1.17-1.42)
1,050 (4,670)
2,100 (9,341)
6" (15.24)
8" (20.32)
02217005
02417005
.52"-.62" (1.32-1.57)
1,050 (4,670)
2,100 (9,341)
7" (17.78)
8.5" (21.59)
02217006
02417006
.58"-.68" (1.47-1.73)
1,050 (4,670)
2,100 (9,341)
7" (17.78)
9.5" (24.13)
02217007
02417007
.64"-.75" (1.63-1.90)
1,390 (6,183)
4,161 (18,509)
7" (17.78)
9.5" (24.13)
02217008
02417008
.70"-.81" (1.78-2.06)
1,390 (6,183)
4,100 (18,238)
8" (20.32)
10.5" (26.67)
02217009
02417009
.75"-.87" (1.90-2.21)
1,390 (6,183)
—
8" (20.32)
10.5" (26.67)
02217010
—
.81"-.94" (2.06-2.39)
1,390 (6,183)
—
8" (20.32)
10.5" (26.67)
02217011
—
.87"-1.00" (2.21-2.54)
1,790 (7,962)
5,350 (23,798)
8" (20.32)
11.5" (29.21)
02217012
02417012
.94"-1.06" (2.39-2.69)
1,790 (7,962)
5,300 (23,576)
9" (22.86)
12.5" (31.75)
02217013
02417013
1.00"-1.18" (2.54-3.00)
1,790 (7,962)
5,300 (23,576)
9" (22.86)
13.5" (34.29)
02217014
02417014
1.06"-1.25" (2.69-3.17)
1,790 (7,962)
5,350 (23,798)
9" (22.86)
14.5" (36.83)
02217015
02417015
Note: E-Eye length. M-Mesh length at nominal diameter.
.29''
(.74)
Screw Hook
Catalog Number 20303001
Yield Strength 900 lbs (4003 N)
V-34
.31''
(.79) Dia.
2.00''
(5.08)
4.86''
(12.42)
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Service Drop Grips
Universal Eye, Tin-Coated Bronze
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 to V-45.
Light Duty, Universal Eye, Closed Mesh, Single Weave
For permanent support when cable end is available to be installed.
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Catalog Number
.23"-.31" (.58-.79)
290 (1,290)
9" (22.86)
3.75" (9.52)
02216016
.29"-.37" (.74-.94)
290 (1,290)
10" (25.40)
4.25" (10.79)
02216017
.35"-.44" (.89-1.12)
500 (2,224)
10" (25.40)
4.75" (12.06)
02216018
.41"-.50" (1.04-1.27)
500 (2,224)
11" (27.94)
5" (12.70)
02216019
.46"-.56" (1.17-1.42)
660 (2,936)
12" (30.48)
5.25" (13.33)
02216020
.52"-.62" (1.32-1.57)
790 (3,514)
13" (33.02)
6.25" (15.87)
02216021
.58"-.68" (1.47-1.73)
790 (3,514)
13" (33.02)
6.5" (16.51)
02216022
.64"-.75" (1.63-1.90)
790 (3,514)
13" (33.02)
6.75" (17.14)
02216023
.70"-.81" (1.78-2.06)
790 (3,514)
13" (33.02)
7.25" (18.41)
02216024
.75"-.87" (1.90-2.21)
1,020 (4,537)
14" (35.56)
8" (20.32)
02216025
.81"-.94" (2.06-2.39)
1,020 (4,537)
14" (35.56)
8.25" (20.95)
02216026
.87"-1.00" (2.21-2.54)
1,020 (4,537)
14" (35.56)
8.75" (22.22)
02216027
.94"-1.06" (2.39-2.69)
1,020 (4,537)
15" (38.10)
9" (22.86)
02216028
1.00"-1.18" (2.54-3.00)
1,020 (4,537)
15" (38.10)
9.5" (24.13)
02216029
1.06"-1.25" (2.69-3.17)
1,020 (4,537)
15" (38.10)
9.5" (24.13)
02216030
Heavy Duty, Universal Eye, Closed Mesh, Multi-Weave
For permanent support when cable end is available to be installed.
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Catalog Number
.23"-.31" (.58-.79)
500 (2,224)
11" (27.94)
4.5" (11.43)
02217016
.28"-.37" (.74-.94)
500 (2,224)
11" (27.94)
5.5" (13.97)
02217017
.35"-.44" (.89-1.12)
870 (3,870)
12" (30.48)
6.5" (16.51)
02217018
.41"-.50" (1.04-1.27)
870 (3,870)
12" (30.48)
7.5" (19.05)
02217019
.46"-.56" (1.17-1.42)
1,050 (4,670)
12" (30.48)
8" (20.32)
02217020
.52"-.62" (1.32-1.57)
1,050 (4,670)
13" (33.02)
8.5" (21.59)
02217021
.58"-.68" (1.47-1.73)
1,050 (4,670)
13" (33.02)
9.5" (24.13)
02217022
.64"-.75" (1.63-1.90)
1,390 (6,183)
13" (33.02)
9.5" (24.13)
02217023
.70"-.81" (1.78-2.06)
1,390 (6,183)
14" (35.56)
10.5" (26.67)
02217024
.75"-.87" (1.90-2.21)
1,390 (6,183)
14" (35.56)
10.5" (26.67)
02217025
.81"-.94" (2.06-2.39)
1,390 (6,183)
14" (35.56)
10.5" (26.67)
02217026
.87"-1.00" (2.21-2.54)
1,790 (7,962)
14" (35.56)
11.5" (29.21)
02217027
.94"-1.06" (2.39-2.69)
1,790 (7,962)
15" (38.10)
12.5" (31.75)
02217028
1.00"-1.18" (2.54-3.00)
1,790 (7,962)
15" (38.10)
13.5" (34.29)
02217029
1.06"-1.25" (2.69-3.17)
1,790 (7,962)
15" (38.10)
14.5" (36.83)
02217030
Note: E-Eye length. M-Mesh length at nominal diameter.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-35
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Bus Drop Support Grips
Single Eye, Universal Eye, Galvanized Steel
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 to V-45.
Safety Spring
Maximum Deflection
Inches/Lbs (cm/N)
Approx. Breaking
Strength Lbs. (N)
Length*
Inches (cm)
Diameter
Inches (cm)
Model
Lbs. (N)
2¾" at 40 lbs.
(6.98 at 178)
500 (2,224)
8.25" (20.95)
.75" (1.90)
40 lb. spring
(178)
20302001
3¹⁄₈" at 80 lbs.
(7.94 at 356)
850 (3,781)
8.25" (20.95)
1" (2.54)
80 lb. spring
(356)
20302002
Catalog Number
Note: Springs can be used with single eye grips by disassembling drawbar from coil, placing through eye and replacing drawbar.
*No load.
Single Eye, Wide Range
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Catalog Number
.24"-.32" (.61-.81)
350 (1,557)
3" (7.62)
3.5" (8.89)
073041276**
.32"-.43" (.81-1.09)
450 (2,002)
4" (10.16)
4" (10.16)
073041277
.43"-.56" (1.09-1.42)
550 (2,446)
6" (15.24)
4.75" (12.06)
073041278
.56"-.73" (1.42-1.85)
1,000 (4,448)
7" (17.78)
6" (15.24)
073041279
.73"-.85" (1.85-2.16)
1,400 (6,227)
7" (17.78)
6.75" (17.14)
073041280
.85"-1.00" (2.16-2.54)
1,400 (6,227)
8" (20.32)
8" (20.32)
073041281
1.00"-1.25" (2.54-3.17)
1,500 (6,672)
9" (22.86)
9.5" (24.13)
073041282
Universal Eye, Wide Range
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Inches (cm)
M
Inches (cm)
Catalog Number
.32"-.43" (.81-1.09)
450 (2,002)
10" (25.40)
4" (10.16)
073041284
.43"-.56" (1.09-1.42)
550 (2,446)
12" (30.48)
4.75" (12.06)
073041285
.56"-.73" (1.42-1.85)
1,000 (4,448)
13" (33.02)
6" (15.24)
073041286
.73"-.85" (1.85-2.16)
1,400 (6,227)
13" (33.02)
6.75" (17.14)
073041287
.85"-1.00" (2.16-2.54)
1,400 (6,227)
14" (35.56)
8" (20.32)
073041288
1.00"-1.25" (2.54-3.17)
1,500 (6,672)
15" (38.10)
9.5" (24.13)
073041289
Note: E-Eye length. M-Mesh length at nominal diameter.
**Item indicated is not UL listed.
Bus Drop Grips and Safety Springs
Kellems Bus Drop Grips are offered with either a single eye or universal bale attachment.
The mesh is single weave galvanized steel with the patented wide range construction.
They are suitable for indoor use only. Consult Technical Service for Stainless Steel Grips.
Safety Spring
Strain
Relief
Grip
Application
Bus Drop Grips provide a safe, easy and economical method to support flexible cord or
bus drop cable at bus duct and other industrial areas.
Bus
Drop
Grips
Strain
Relief
Grip
Motor Box
V-36
Benefits
• Easily installed.
• Absorb tension, vibration and pull with no cable damage.
• Patented mesh construction.
Safety Spring
Springs can be used with single eye grips by disassembling drawbar from coil, placing
through eye and replacing drawbar.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Wire Management Products
Conduit Riser Grips
Ring Type, Single Weave, Tin-Coated Bronze
Single Weave, Closed Mesh
IMPORTANT
Kellems®
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 and V-45.
Conduit Riser Support Grips are available in closed mesh and in split mesh
with lace or rod closures, to cover all applications including single cable or multiple wire
support. Refer to page V-45 for grip selection assistance for cable bundles. The standard
material is tin-coated bronze strand. The grip is permanently fastened to a support ring,
resulting in a one piece unit which will allow air ventilation within the conduit. The ring
will fit standard electrical rigid metal conduit and schedule 40 rigid PVC conduit only.
See page V-40 for ring dimensions. For permanent support when cable end is available
to be installed through the grip.
Suitable For Standard Electrical Rigid Metal Conduit and Schedule 40 Rigid PVC Conduit Only
Cable .50"- .62"
Sizes
(1.27-1.57)
In. (cm)
Model
R050
Length 8" (20.32)
In. (cm)
.63"-.74"
(1.60-1.88)
.75"- .99"
(1.90-2.51)
1.00"- 1.24" 1.25"- 1.49"
(2.54-3.15) (3.17-3.78)
1.50"-1.74"
(3.81-4.42)
1.75"-1.99"
(4.44-5.05)
2.00"- 2.49" 2.50" -2.99" 3.00"- 3.49" 3.50"- 3.99"
(5.08-6.32) (6.35-7.59)
(7.62-8.86) (8.89-10.13)
R062
R075
R100
R150
R175
R200
R250
R300
R350
9" (22.86)
11" (27.94)
12" (30.48) 12" (30.48)
14" (35.56)
15" (38.10)
17" (43.18)
18" (45.72)
20" (50.80)
21" (53.34)
R125
Conduit
Sizes
Catalog Number
Inches Approx. Breaking Strength Lbs. (N)
¾
02211106
530 (2,357)
—
—
—
—
—
—
—
—
—
—
1
02211100 02211101
490 (2,179)
790 (3,514)
—
—
—
—
—
—
—
—
—
1¼
02211001 02211002 02211003
450 (2,002) 740 (3,292) 1,030 (4,581)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
02211017
1,510 (6,716)
02211018
1,610 (7,161)
02211019
2,150 (9,563)
—
—
—
—
02211022 02211023
1,340 (5,960) 1,400 (6,227)
02211024
1,490 (6,627)
02211025
1,990 (8,851)
—
—
—
—
—
1½
—
02211006 02211007 02211009
690 (3,069) 970 (4,315)
1,610 (7,161)
2
—
02211107 02211010 02211012 02211013
640 (2,847) 920 (4,092) 1,520 (6,761) 1,610 (7,161)
2½
—
—
—
3
—
—
—
3½
—
—
—
—
—
—
—
4
—
—
—
—
—
—
02211040
1,670 (7,248)
5
—
—
—
—
—
—
—
—
02211061
2,150 (9,563)
6
—
—
—
—
—
—
—
—
—
—
02211026
3,260 (14,500)
02211033 02211034
2,970 (13,211) 3,260 (14,500)
02211041 02211042 02211043
2,680 (11,921) 2,890 (12,855) 4,080 (18,148)
—
02211062 02211063
2,860 (12,721) 3,130 (13,922)
02211072
2,245 (9,986)
02211073
2,245 (9,986)
Note: See page V-45 for multiple cables in a single conduit riser grip.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-37
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Conduit Riser Grips
Ring Type, Double Weave, Tin-Coated Bronze
Double Weave, Split Mesh, Lace Closing
IMPORTANT
Kellems®
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 and V-45.
Conduit Riser Support Grips will support cable runs in vertical or sloping
standard rigid conduit. The grip is fastened to a support ring which seats on the rim of
the conduit. The entire grip is supported by the conduit itself and no other hardware is
required. See page V-40 for ring dimensions. The rings will fit schedule 40 rigid PVC
conduit and standard electrical rigid metal conduit only. For permanent support when
cable end is not available.
Suitable For Standard Electrical Rigid Metal Conduit and Schedule 40 Rigid PVC Conduit Only
Cable
Sizes
In. (cm)
.75"- .99"
(1.90-2.51)
1.00"- 1.24"
(2.54-3.15)
1.25"- 1.49"
(3.17-3.78)
1.50"-1.74"
(3.81-4.42)
1.75"- 1.99"
(4.44-5.05)
2.00"- 2.49"
(5.08-6.32)
2.50"- 2.99"
(6.35-7.59)
3.00"- 3.49"
(7.62-8.86)
3.50" -3.99"
(8.89-10.13)
Model
RS075
RS100
RS125
RS150
RS175
RS200
RS250
RS300
RS350
Length
In. (cm)
11" (27.94)
12" (30.48)
12" (30.48)
14" (35.56)
15" (38.10)
17" (43.18)
18" (45.72)
20" (50.80)
21" (53.34)
Conduit
Sizes
Inches
Catalog Number
Approx. Breaking Strength Lbs. (N)
1¼
02212003
—
—
—
—
—
—
—
—
02212007
—
—
—
—
—
—
—
—
02212010
02212012
02212013
—
—
—
—
—
—
—
—
02212017
02212018
—
—
—
—
—
—
—
02212023
02212024
02212025
02212026
—
—
—
—
—
—
—
—
02212033
02212034
—
—
—
—
—
—
02212040
02212041
02212042
02212043
—
—
—
—
—
—
—
02212061
—
—
—
—
—
—
—
—
—
—
02212073
1,580 (7,028)
1½
1,500 (6,672)
2
1,430 (6,361)
2½
3
3½
4
5
6
1,930 (8,585)
2,040 (9,074)
1,910 (8,496)
2,040 (9,074)
1,780 (7,917)
1,890 (8,407)
2,520 (11,209)
2,110 (9,385)
4,300 (19,126)
3,910 (17,392)
3,530 (15,701)
4,300 (19,126)
3,820 (16,991)
2,860 (12,721)
5,380 (23,930)
2,955 (13,144)
Note: See page V-45 for multiple cables in a single conduit riser grip.
V-38
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Conduit Riser Grips
Ring Type, Single Weave, Tin-Coated Bronze
IMPORTANT
Single Weave, Split Mesh, Rod Closing Benefits
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 and V-45.
• Easy and fast to install.
• Will not damage electrical cable.
• Allows cable to expand or contract.
• Ideal way to hold cable in vertical conduit.
• Prevents cable creep in conduit.
• Helps prevent cable pullouts.
• The rings will fit schedule 40 rigid PVC conduit and standard electrical
rigid metal conduit only.
• For support when cable end is not available.
Suitable For Standard Electrical Rigid Metal Conduit and Schedule 40 Rigid PVC Conduit Only
Cable
Sizes
In. (cm)
.75"- .99"
(1.90-2.51)
1.00"- 1.24"
(2.54-3.15)
1.25"- 1.49"
(3.17-3.78)
1.50"-1.74"
(3.81-4.42)
1.75"- 1.99"
(4.44-5.05)
2.00"- 2.49"
(5.08-6.32)
2.50"- 2.99"
(6.35-7.59)
3.00"- 3.49"
(7.62-8.86)
3.50" -3.99"
(8.89-10.13)
Model
RR075
RR100
RR125
RR150
RR175
RR200
RR250
RR300
RR350
Length
In. (cm)
11" (27.94)
12" (30.48)
12" (30.48)
14" (35.56)
15" (38.10)
17" (43.18)
18" (45.72)
20" (50.80)
21" (53.34)
Conduit
Sizes
Inches
Catalog Number
Approx. Breaking Strength Lbs. (N)
1¼
02213003
—
—
—
—
—
—
—
—
02213007
02213009
—
—
—
—
—
—
—
—
02213012
02213013
—
—
—
—
—
—
—
—
02213017
02213018
—
—
—
—
—
—
—
02213023
02213024
02213025
02213026
—
—
—
—
—
—
—
—
02213033
—
—
—
—
—
—
—
—
02213041
02213042
—
—
1,020 (4,537)
1½
970 (4,315)
2
2½
3
3½
4
1,610 (7,161)
1,520 (6,761)
1,610 (7,161)
1,510 (6,716)
1,400 (6,227)
1,610 (7,161)
1,490 (6,627)
1,990 (8,851)
3,260 (14,500)
2,970 (13,211)
2,670 (11,876)
2,890 (12,855)
Note: See page V-45 for multiple cables in a single conduit riser grip.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-39
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Conduit Riser Grips
Conduit Riser Support Grip-Ring Dimensions
Conduit Ring Dimensions
IMPORTANT
Ring dimensions are found in the chart below. The ring material is corrosion resistant.
These rings will fit schedule 40 rigid PVC conduit and standard electrical rigid metal
conduit only.
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 to V-45.
O.D.
I.D.
T
Conduit Size ¾" and 1"
O.D.
I.D.
T
Conduit Size
Inches
Ring
Number
O.D.
Inches (cm)
I.D.
Inches (cm)
S
Inches (cm)
T
Inches (cm)
¾
C-¾
.94" (2.39)
.62" (1.57)
—
.19" (.48)
1
C-1
1.17" (2.97)
.80" (2.03)
—
.19" (.48)
1¼
C-1¼
1.50" (3.81)
1.03" (2.62)
1.31" (3.33)
.16" (.41)
1½
C-1½
1.76" (4.47)
1.23" (3.12)
1.52" (3.86)
.16" (.41)
2
C-2
2.23" (5.66)
1.55" (3.94)
1.97" (5.00)
.16" (.41)
2½
C-2½
2.67" (6.78)
2.05" (5.21)
2.40" (6.10)
.16" (.41)
3
C-3
3.20" (8.13)
2.55" (6.48)
2.97" (7.54)
.22" (.56)
3½
C-3½
3.80" (9.65)
3.05" (7.75)
3.47" (8.81)
.22" (.56)
4
C-4
4.30" (10.92)
3.55" (9.02)
3.94" (10.01)
.22" (.56)
4½
C-4½
4.80" (12.19)
4.03" (10.24)
4.45" (11.30)
.22" (.56)
5
C-5
5.30" (13.46)
4.46" (11.33)
4.96" (12.60)
.22" (.56)
6
C-6
6.30" (16.00)
5.36" (13.61)
5.96" (15.14)
.25" (.63)
T
S
Conduit Size 1¼" to 6"
V-40
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Support Grips
Kellems® Support Grips
Kellems Support Grips are used to hold the weight of electrical cable as it hangs in a vertical, sloping or horizontal position.
Electrical cable must be supported, or its dead weight can cause excessive strain or pullout at the connections resulting in
power failure. Support grips also absorb additional strain from flexure, vibration, expansion and contraction. Kellems Support
Grips listed in this catalog are made of high grade, non-magnetic tin-coated bronze strand. Stainless steel grips, made of alloy
302–304 SST for severe service or unusual environmental conditions, are available on request.
Select the Correct Support Grip
Each Kellems grip is designed to work on a specific
range of cable diameters.
Step 1 Refer to the Kellems chart below to determine
the grip style best suited for your application.
Step 2 Determine your cable outside diameter.
Step 3 Find the grip size that encompasses your
cable diameter.
Step 4 Whenever possible, use a closed mesh that
assembles over the cable end. If the cable end
is not available, use a split mesh.
Step 5 Where available, select an eye style that suits
your needs.
Step 6 Select the proper material—tinned bronze or
stainless steel*.
Step 7 Estimate the tension to be put on the grip,
establish the working load you require and
compare this to the listed approximate breaking
strength of the grip to insure that the grip will be
strong enough. Refer to page V-42 for safety
and working load considerations.
CAUTION: It is very important to comply with all of the
following precautions.
1. Support grips are to be installed by a qualified individual in
accordance with all applicable national and local safety, electrical
and rigging codes.
2. Ensure that the correct grip is selected for your specific needs.
3. Do not use a support grip for any application other than
supporting cable.
4. Thoroughly examine the grip for damage. Do not use a damaged grip.
5. Ensure that the recommended work load of the grip is suitable for
the application. Never use grips at their approximated rated breaking
strength. A safety factor of 10 is recommended for support grips.
6. Do not alter grips in any way. For example, do not flatten, straighten,
bend or otherwise modify eye tubes, hooks, and strand equalizers.
7. Do not attach any type of hook, clamp or other hardware directly to
the stranded bale of a “U” eye support grip. The formed eye tube is
the only acceptable means of attachment to external hardware.
8. Always apply 2 bands at 1" and 2" respectively, from the tail end of
the mesh to guard against accidental release of the grip. Accidental
release can occur if an object contracts and pushes against the tail
end of the mesh, thereby expanding and releasing it’s hold.
Support Grip Selection Chart
Grip Styles
Application
Page
Closed mesh
Standard, permanent support, cable end available.
V-28 to V-36
Split lace closing
Standard, permanent support, cable end unavailable.
V-28 to V-33
Split rod closing
Standard, temporary support, cable end unavailable. Tape or band tail end of
wire mesh grip after positioning for permanent support.
V-28 to V-31
Material*
Tin-coated bronze standard or stainless steel by special request.
V-28 to V-34
Standard support grips
Support vertical runs to 99 ft. loads to 600 lbs.
V-28 to V-31
Heavy duty grips
Support vertical runs over 100 ft. loads over 600 lbs.
V-32, V-33
Service drop
Light duty to support service entrance cable.
V-34, V-35
Bus drop
Light duty support, indoors only, on Bus drop cable.
V-36
Conduit riser
Support cable runs in rigid (Schedule 40) conduit.
V-37 to V-39
Fiber optic cable support grips
Support fiber optic cable.
V-50
Note: *Most catalog listed support grips are made of tin-coated bronze strand. To order stainless steel support grips, change the first three catalog number digits from
022-0x-xxx to 024-0x-xxx. Consult Technical Service for details.
Eye Styles
Single
www.hubbell-wiring.com
Double
Universal
®
Offset
Wiring Device-Kellems
V-41
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Support Grips
Safety And Working Load Factors For Wire Mesh Grips
The broad application of Kellems grips on a wide variety of
objects requires that adequate safety factors be used to
establish working loads. The approximate breaking strength
of a Kellems grip represents an average calculation based on
data established from actual direct tension testing done in
our engineering laboratories.
It is impossible to catalog or guarantee a safety factor
suitable for all applications as operating conditions are never
the same. The tension, diameter, movement, number of
objects gripped, gripping surface, and the attachments used
are just some of the factors which vary with each application.
These factors, together with the effects of abrasion,
corrosion, prior use or abuse and any other variables of a
specific application, must be considered by the user and
the grip replaced as appropriate. Where the conditions of
the application are not well defined or known, or where risk
of injury to persons or property is involved, a greater safety
factor should be utilized.
Under normal conditions, Kellems’ recommended
factor of safety is five for catalog listed pulling grips,
and ten for catalog listed support grips.
Any warranty as to quality, performance or fitness for
use of grips is always premised on the condition that the
published breaking strengths apply only to new, unused
grips, and that such products are properly stored, handled,
used, maintained, and inspected by the user at a frequency
appropriate for the use and condition of the grip.
Examples
Grip Style
Approx. Breaking
Strength Lbs. (N)
Pulling Grips
27,200 (120,986)
Support Grips
1,610 (7,161)
Safety
Factor
5
10
Max. Recommended
Load Lbs. (N)
Catalog Number
5,440 (24,197)
03301027
161 (716)
02202019
The maximum recommended working load is the tension to be exerted on the grip in application with a margin of safety to
take care of unforeseen and unusual circumstances.
It is the end-user’s decision to determine how much of a safety factor is acceptable for the application.
The metric unit of measure (force) for breaking strength and load is newtons (N). To convert from newtons to the metric unit
of weight (kilograms) the conversion factor is 9.808 newtons/kilogram.
Support Grip Materials
Material
Features
Grip Type
Tin-coated bronze wire
• Corrosion resistant for normal outside areas
• Non-magnetic
• Moderate strength
• High strength
• Corrosion resistant
• Slightly magnetic
• Not subject to continuous
outside environment
• Support grips
• Service drop grips
• Conduit riser grips
• Support grips
• Hose containment grips
• Bus drop grips
Stainless steel wire
(302-304)
Galvanized steel wire
Approvals
CSA Certifications are indicated on appropriate product catalog pages.
Note: It is always recommended that the tail end of the grip be banded after the installation on the cable to prevent accidental release of the mesh.
See page V-15 for end bands.
V-42
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Support Grips
Split Support Grip Lace Closing Instructions
Single Weave Grips should be laced with single strand lacing; double weave with double strand. Lacing strands should be
the same material as the grip. Kellems supplies the appropriate lacing with each grip.
1. Start the lacing at the lead or anchoring end of the grip. Thread the lacings through the first two loops of the split and
pull through until the lacings are centered at this point. Lace as you would your shoe, crossing the lacings before lacing
the next two loops.
2. Don’t pull lacing too tight. Leave a space between adjoining loops approximately equal to the width of one diamond of
the mesh.
3. Twist the lacing strands tightly together at the tail end of the grip.
4. Wrap the ends of the lacings once or twice tightly around the tail of the grip, twisting the ends together securely.
Excess lace can be cut off.
Split Support Grip Rod Closing Instructions
The stainless steel rod is a precise built-in feature which makes threading easy and fast. The strands of the mesh pass
around the rod and match up with the strands from the opposite direction. The rod does not touch the cable at any point and
therefore cannot cut the cable. Rod Closing Grips are reusable. They may be removed and reused as many times as desired.
1. Fast to install
Wrap the grip around the cable and thread the rod through the pre-formed loops with a corkscrew motion, using the
curved end of the rod to engage the loops.
2. The action required is a steady push and twist simultaneously. The fingers of the left hand are used to bring the loops
together just ahead of the hook on the end of the rod.
3. To remove, simply pull the rod out.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-43
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Support Grips
For Support Grips Only*
Multiple Cable Selection Charts for Cables and Wires of Unequal Diameters
How to choose the correct grip size:
1. Find the Grip Circumference Range by measuring the circumference
of the bundle of different diameter cables to be gripped (see illustration).
2. Divide the bundle circumference by 3.14 to determine the diameter.
3. Choose a grip offering a range of cable diameters the same as the
cable diameter.
For Cables of Equal Diameters
Under “Number of Cables in One Grip”, find the diameter of your single cable in vertical column. Read the grip diameter range to the right.
If your diameter is the maximum of the range shown, go to the next larger size for Split Grips, stay with the same size for Closed Grips.
Example: 3 cables, each with .89" (2.26) diameter, for a Closed Grip select the 1.50"-1.74" (3.81-4.42) range, for a Split Grip select the
1.75"-1.99" (4.44-5.05) range.
Number of Cables in One Grip
2
3
4
5
6 and 7
8
9
Grip Dia. Range
Inches (cm)
.30-.38
(.76-.97)
.25-.31
(.63-.79)
.22-.27
(.56-.69)
.19-.24
(.48-.61)
.17-.22
(.43-.56)
.15-.19
(.38-.48)
.14-.18
(.36-.46)
.50-.61
(1.27-1.55)
.38-.44
(.97-1.12)
.31-.36
(.79-.91)
.27-.31
(.69-.79)
.24-.29
(.61-.74)
.22-.26
(.56-.66)
.19-.23
(.48-.58)
.18-.21
(.46-.53)
.62-.74
(1.57-1.88)
.44-.59
(1.12-1.50)
.36-.49
(.91-1.24)
.31-.42
(.79-1.07)
.29-.38
(.74-.97)
.26-.34
(.66-.86)
.23-.31
(.58-.79)
.21-.28
(.53-.71)
.75-.99
(1.90-2.51)
.59-.75
(1.50-1.90)
.49-.63
(1.24-1.60)
.42-.54
(1.07-1.37)
.38-.48
(.97-1.22)
.34-.43
(.86-1.09)
.31-.39
(.79-.99)
.28-.35
(.71-.89)
1.00-1.24
(2.54-3.15)
.75-.90
(1.90-2.29)
.63-.76
(1.60-1.93)
.54-.65
(1.37-1.65)
.48-.58
(1.22-1.47)
.43-.52
(1.09-1.32)
.39-.46
(.99-1.17)
.35-.42
(.89-1.07)
1.25-1.49
(3.17-3.78)
.90-1.07
(2.29-2.72)
.76-.89
(1.93-2.26)
.65-.77
(1.65-1.96)
.58-.67
(1.47-1.70)
.52-.60
(1.32-1.52)
.46-.54
(1.17-1.37)
.42-.49
(1.07-1.24)
1.50-1.74
(3.81-4.42)
1.07-1.22
(2.72-3.10)
.89-1.02
(2.26-2.59)
.77-.88
(1.96-2.24)
.67-.77
(1.70-1.96)
.60-.69
(1.52-1.75)
.54-.62
(1.37-1.57)
.49-.56
(1.24-1.42)
1.75-1.99
(4.44-5.05)
1.22-1.53
(3.10-3.89)
1.02-1.28
(2.59-3.25)
.88-1.10
(2.24-2.79)
.77-.96
(1.96-2.44)
.69-.86
(1.75-2.18)
.62-.77
(1.57-1.96)
.56-.71
(1.42-1.80)
2.00-2.49
(5.08-6.32)
1.53-1.83
(3.89-4.65)
1.28-1.53
(3.25-3.89)
1.10-1.32
(2.79-3.35)
.96-1.16
(2.44-2.95)
.86-1.03
(2.18-2.62)
.77-.93
(1.96-2.36)
.71-.85
(1.80-2.16)
2.50-2.99
(6.35-7.59)
1.83-2.14
(4.65-5.44)
1.53-1.79
(3.89-4.55)
1.32-1.54
(3.35-3.91)
1.16-1.35
(2.95-3.43)
1.03-1.20
(2.62-3.05)
.93-1.08
(2.36-2.74)
.85-.99
(2.16-2.51)
3.00-3.49
(7.62-8.86)
2.14-2.44
(5.44-6.20)
1.79-2.05
(4.55-5.21)
1.54-1.76
(3.91-4.47)
1.35-1.54
(3.43-3.91)
1.20-1.37
(3.05-3.48)
1.08-1.24
(2.74-3.15)
.99-1.13
(2.51-2.87)
3.50-3.99
(8.89-10.13)
2.44-2.75
(6.20-6.98)
2.05-2.30
(5.21-5.84)
1.76-1.98
(4.47-5.03)
1.54-1.74
(3.91-4.42)
1.37-1.55
(3.48-3.94)
1.24-1.39
(3.15-3.53)
1.13-1.27
(2.87-3.23)
4.00-4.49
(10.16-11.40)
2.75-3.06
(6.98-7.77)
2.30-2.56
(5.84-6.50)
1.98-2.20
(5.03-5.59)
1.74-1.93
(4.42-4.90)
1.55-1.72
(3.94-4.37)
1.39-1.55
(3.53-3.94)
1.27-1.41
(3.23-3.58)
4.50-4.99
(11.43-12.67)
Note: *This chart is to be used for determining grip size when multiple cables are held in a single Support Grip. For Conduit Riser multiple cable selection, see page V-45.
It is always recommended that, when multiple cables are installed in a Support Grip, the tail end of the grip be banded after installation on the cable bundle.
See page Tech-23 for cable and wire charts.
V-44
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Conduit Riser Support Grips
For Conduit Riser Grips Only*
Multiple Cable Selection Charts for Cables and Wires of Unequal Diameters
How to choose the correct grip size:
1. Find the Grip Circumference Range by measuring the circumference
of the bundle of different diameter cables to be gripped (see illustration).
2. Divide the bundle circumference by 3.14 to determine the diameter.
3. Choose a grip offering a range of cable diameters the same as the
cable diameter.
For Cables of Equal Diameters
Under “Number of Cables in One Grip”, find the diameter of your single cable in vertical column. Read the grip diameter range to the right.
If your diameter is the maximum of the range shown, go to the next larger size for Split Grips, stay with the same size for Closed Grips.
Example: 3 cables, each with .85" (2.16) diameter, for a Closed Grip select the 1.50"-1.74" (3.81-4.42) range, for a Split Grip select the
1.75"-1.99" (4.44-5.05) range.
Number of Equal Diameter Cables in One Grip
2
3
4
5
6 and 7
8
9
Grip Dia. Range
Inches (cm)
.29-.36
(.74-.91)
.24-.30
(.61-.76)
.21-.25
(.53-.63)
.18-.22
(.46-.56)
.16-.20
(.41-.51)
.15-.18
(.38-.46)
.14-.17
(.36-.43)
.50-.62
(1.27-1.57)
.37-.43
(.94-1.09)
.31-.36
(.79-.91)
.26-.30
(.66-.76)
.23-.27
(.58-.69)
.21-.24
(.53-.61)
.19-.22
(.48-.56)
.18-.20
(.46-.51)
.63-.74
(1.60-1.88)
.44-.58
(1.12-1.47)
.37-.48
(.94-1.22)
.31-.41
(.79-1.04)
.28-.36
(.71-.91)
.25-.32
(.63-.81)
.23-.29
(.58-.74)
.21-.27
(.53-.69)
.75-.99
(1.90-2.51)
.59-.72
(1.50-1.83)
.49-.60
(1.24-1.52)
.42-.51
(1.07-1.30)
.37-.45
(.94-1.14)
.33-.40
(.84-1.02)
.30-.36
(.76-.91)
.28-.34
(.71-.86)
1.00-1.24
(2.54-3.15)
.73-.87
(1.85-2.21)
.61-.72
(1.55-1.83)
.52-.61
(1.32-1.55)
.46-.54
(1.17-1.37)
.41-.48
(1.04-1.22)
.37-.43
(.94-1.09)
.35-.40
(.89-1.02)
1.25-1.49
(3.17-3.78)
.88-1.01
(2.24-2.57)
.73-.85
(1.85-2.16)
.62-.71
(1.57-1.80)
.55-.63
(1.40-1.60)
.49-.56
(1.24-1.42)
.44-.51
(1.12-1.30)
.41-.47
(1.04-1.19)
1.50-1.74
(3.81-4.42)
1.02-1.16
(2.59-2.95)
.86-.96
(2.18-2.44)
.72-.81
(1.83-2.06)
.64-.72
(1.63-1.83)
.57-.64
(1.45-1.63)
.52-.58
(1.32-1.49)
.48-.54
(1.22-1.37)
1.75-1.99
(4.44-5.05)
1.17-1.44
(2.97-3.66)
.97-1.20
(2.46-3.05)
.82-1.02
(2.08-2.59)
.73-.90
(1.85-2.29)
.65-.80
(1.65-2.03)
.59-.72
(1.50-1.83)
.55-.67
(1.40-1.70)
2.00-2.49
(5.08-6.32)
1.45-1.73
(3.68-4.39)
1.21-1.45
(3.07-3.68)
1.03-1.22
(2.62-3.10)
.91-1.08
(2.31-2.74)
.81-.96
(2.06-2.44)
.73-.87
(1.85-2.21)
.68-.81
(1.73-2.06)
2.50-2.99
(6.35-7.59)
1.74-2.02
(4.42-5.13)
1.46-1.69
(3.71-4.29)
1.23-1.43
(3.12-3.63)
1.09-1.26
(2.77-3.20)
.97-1.11
(2.46-2.82)
.83-1.01
(2.11-2.57)
.82-.94
(2.08-2.39)
3.00-3.49
(7.62-8.86)
2.03-2.31
(5.16-5.87)
1.70-1.93
(4.32-4.90)
1.44-1.63
(3.66-4.14)
1.27-1.44
(3.23-3.66)
1.12-1.27
(2.84-3.23)
1.02-1.15
(2.59-2.92)
.95-1.08
(2.41-2.74)
3.50-3.99
(8.89-10.13)
Note: *This chart is to be used for determining grip size when multiple cables are held in a single Conduit Riser Grip. For Support Grip multiple cable selection, see page V-44.
It is always recommended that, when multiple cables are installed in a Conduit Riser Grip, the tail end of the grip be banded after installation on the cable bundle.
See page Tech-23 for cable and wire charts.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-45
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Fiber Optic Cable Grips
Pulling and Support Grips
OPTISOK® Grip is a revolutionary tool to pull
preterminated fiber optic cables. They will protect
the connectors and guide the bundle through the
pulling environment
Pulling Grips are used for outside plant cable.
They are easy to install and remove, reusable,
and have a slim profile for small build up
Grips for cable support are easy to install or position.
They come in a closed style when the cable end is
available, and a split rod style for mid-span installation.
Will support the cable’s weight as it hangs in vertical,
sloping or horizontal position
V-46
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Fiber Optic Cable Pulling Grips
Special Purpose
OPTISOK® Non-metallic Fiber Optic Pulling Tool For Preterminated,
Inside Plant Fiber Optic Cables and Bundles of Twisted Pair
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-51 to V-54.
OPTISOK® Non-Metallic Fiber Optic Pulling Tool
Bundle/Size Range
Inches (cm)
Approx. O/A Length
Inches (cm)
Ring O.D.
Inches (cm)
Ring Thickness
Inches (cm)
Maximum Work
Load Lbs. (N)
Catalog Number
.125"-.562" (.318-1.427)
28" (71.12)
.71" (1.803)
.10" (.254)
30 (133)
CCPS1
.250"-.750" (.635-1.905)
31" (78.74)
.71" (1.803)
.10" (.254)
40 (178)
CCPS2
.750"-1.750" (1.905-4.445)
33" (83.82)
1.57" (3.988)
.16" (.406)
50 (222)
CCPS3
Pulling Grip For Loose Tube Fiber Optic Cable, Galvanized Steel
Pulling Grip For Loose Tube Fiber Optic Cable, Galvanized Steel
Diameter Range
Inches (cm)
Mesh Length
Inches (cm)
Eye Length
Inches (cm)
Eye Diameter
Inches (cm)
Lug Diameter
Inches (cm)
Maximum Breaking
Strength Lbs. (N)
Catalog Number
.312"-.625" (.79-1.59)
22.5" (57.15)
6.3" (16.00)
.20" (.51)
.51" (1.30)
3,000 (13,344)
PFOLT312
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-47
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Fiber Optic Cable Pulling Grips
Double/Single Weave Mesh, Galvanized Steel, for Outside Plant Cable
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-51 to V-54.
M
E
D
Fiber Optic Pulling Grip, Flexible Eye
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Approx.
Inches (cm)
M
Approx.
Inches (cm)
D
Approx.
Inches (cm)
Catalog Number
.10"-.22" (.25-.56)
1,000 (4,448)
5.5" (14)
9" (23)
0.8" (2)
033291000
.21"-.35" (.53-.89)
1,500 (6,672)
5.5" (14)
14" (36)
0.8" (2)
033291001
.32"-.48" (.81-1.22)
2,200 (9,786)
6.0" (15)
18" (46)
0.9" (2.29)
033291002
.42"-.61" (1.07-1.55)
2,800 (12,454)
6.0" (15)
21" (53)
0.9" (2.29)
033291003
.53"-.74" (1.35-1.88)
3,300 (14,678)
6.5" (17)
24" (61)
1.3" (3.30)
033291004
.64"-.87" (1.63-2.21)
4,700 (20,906)
6.5" (17)
27" (69)
1.3" (3.30)
033291005
M
E
D
Fiber Optic Pulling Grip, Swivel Eye
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Approx.
Inches (cm)
M
Approx.
Inches (cm)
D
Approx.
Inches (cm)
Catalog Number
.21"-.35" (.53-.89)
1,500 (6,672)
4.0" (10.16)
14" (35.56)
0.9" (2.29)
033291008
.32"-.48" (.81-1.22)
2,200 (9,786)
4.0" (10.16)
18" (45.72)
0.9" (2.29)
033291009
.42"-.61" (1.07-1.55)
2,800 (12,454)
4.0" (10.16)
21" (53.34)
0.9" (2.29)
033291010
.53"-.74" (1.35-1.88)
3,250 (14,457)
4.8" (12.19)
24" (60.96)
1.3" (3.30)
033291011
.64"-.87" (1.63-2.21)
4,700 (20,906)
4.8" (12.19)
27" (68.58)
1.3" (3.30)
033291012
Note: E-Eye length. M-Mesh length at nominal diameter.
V-48
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Fiber Optic Cable Pulling Grips
Galvanized Steel for Outside Plant Cable
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-51 to V-54.
M
E
Fiber Optic Pulling Grip, Flexible Eye, Low Profile, Double/Single Weave Mesh
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Approx.
Inches (cm)
M
Approx.
Inches (cm)
Catalog Number
.10"-.22 (.25-.56)
900 (4,003)
7.5" (19)
10" (25)
033291193
.21"-.35" (.53-.89)
1,400 (6,227)
7.5" (19)
14" (36)
033291194
.32"-.48" (.81-1.22)
2,000 (8,896)
8.5" (22)
19" (48)
033291195
.42"-.61" (1.07-1.55)
2,500 (11,120)
8.5" (22)
21" (53)
033291196
.53"-.74" (1.35-1.88)
3,000 (13,344)
8.5" (22)
23" (58)
033291197
.64"-.87" (1.63-2.21)
4,200 (18,682)
8.5" (22)
25" (64)
033291198
.75"-1.00" (1.90-2.54)
4,200 (18,682)
8.5" (22)
28" (71)
033291199
M
E
Fiber Optic Slack Pulling Grip, Split Mesh Rod Closing, Single Weave
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Approx.
Inches (cm)
M
Approx.
Inches (cm)
Catalog Number
.25"-.37" (.63-.94)
300 (1,334)
3" (7.6)
4.7" (12)
033291015
.38"-.49" (.97-1.24)
800 (3,558)
3" (7.6)
5" (13)
033291016
.50"-.61" (1.27-1.55)
800 (3,558)
3" (7.6)
7.5" (19)
033291017
.62"-.74" (1.57-1.88)
1,200 (5,338)
3" (7.6)
8" (20)
033291018
Note: E-Eye length. M-Mesh length at nominal diameter.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-49
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Fiber Optic Cable Support Grips
Single Weave, Tin-Coated Bronze
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-51 to V-54.
Fiber Optic Single Eye Cable Support Grip, Closed Mesh, Single Weave
For permanent support when cable end is available to be installed through grip.
E
M
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Approx.
Inches (cm)
M
Approx.
Inches (cm)
Catalog Number
.18"-.25" (.46-.63)
300 (1,334)
3" (7.6)
1.7" (4.3)
022291000
.23"-.32" (.58-.81)
300 (1,334)
3" (7.6)
2.5" (6.4)
022291001
.30"-.39" (.76-.99)
300 (1,334)
4" (10)
2.5" (6.4)
022291002
.37"-.48" (.94-1.22)
300 (1,334)
5" (13)
4" (10)
022291003
.46"-.58" (1.17-1.47)
400 (1,779)
6" (15)
4" (10)
022291004
.56"-.71" (1.42-1.80)
600 (2,669)
7" (18)
5.5" (14)
022291005
.69"-.88" (1.75-2.24)
800 (3,558)
8" (20)
6" (15)
022291006
Fiber Optic Single Eye Cable Support Grip, Split Mesh, Rod Closing, Single Weave
For support when cable end not available.
E
M
Cable Diameter Range
Inches (cm)
Approx. Breaking
Strength Lbs. (N)
E
Approx.
Inches (cm)
M
Approx.
Inches (cm)
Catalog Number
.18"-.25" (.46-.63)
300 (1,334)
3" (7.6)
2.5" (6.4)
022291016
.23"-.32" (.58-.81)
300 (1,334)
3" (7.6)
2.5" (6.4)
022291017
.30"-.39" (.76-.99)
300 (1,334)
4" (10)
2.5" (6.4)
022291018
.37"-.48" (.94-1.22)
300 (1,334)
5" (13)
4" (10)
022291019
.46"-.58" (1.17-1.47)
400 (1,779)
6" (15)
5" (13)
022291020
.56"-.71" (1.42-1.80)
600 (2,669)
7" (18)
5" (13)
022291021
.69"-.88" (1.75-2.24)
800 (3,558)
8" (20)
6" (15)
022291022
Note: E-Eye length. M-Mesh length at nominal diameter.
V-50
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Fiber Optic Pulling and Support Grips
Select the Correct Fiber Optic Grip
Kellems has wide experience with grips for use with
fiber optic cable. As the industry leader in producing
wire mesh grips for the stringent requirements of
fiber optic applications, Kellems has developed
several series of grips for use with fiber optic
communications cable.
These grips include pulling grips with built in swivels,
grips with steel ends to protect fragile cable ends,
grips with low profiles to pull cables in tight places
and the OPTISOK® an effective tool to place
preterminated cables. Also available are grips to
support fiber optic cable.
Each Kellems grip is designed to work on a specific range
of cable diameters.
Step 1
Step 2
Step 3
Step 4
Step 5
Determine your cable outside diameter.
Find the grip size that encompasses your cable diameter.
Whenever possible, use a closed mesh that assembles
over the cable end. If the cable end is not available, use
a split mesh.
Where available, select an eye style that suits your needs.
Estimate the tension to be put on the grip, establish the
working load you require and compare this to the listed
approximate breaking strength of the grip to insure that
the grip will be strong enough.
Safety And Working Load Factors For Wire Mesh Grips
The broad application of Kellems grips on a wide variety of
objects requires that adequate safety factors be used to
establish working loads. The approximate breaking strength
of a Kellems grip represents an average calculation based
on data established from actual direct tension testing done
in our engineering laboratories.
the application are not well defined or known or where risk
of injury to persons or property is involved, a greater safety
factor should be utilized.
It is impossible to catalog or guarantee a safety factor
suitable for all applications as operating conditions are never
the same. The tension, diameter, movement, number of
objects gripped, gripping surface, and the attachments used
are just some of the factors which vary with each application.
These factors, together with the effects of abrasion,
corrosion, prior use or abuse and any other variables of a
specific application, must be considered by the user and
the grip replaced as appropriate. Where the conditions of
Under normal conditions, Kellems’ recommended
factor of safety is five for catalog listed pulling grips,
and ten for catalog listed support grips.
Any warranty as to quality, performance or fitness for
use of grips is always premised on the condition that the
published breaking strengths apply only to new, unused
grips, and that such products are properly stored, handled,
used, maintained and inspected by the user at a frequency
appropriate for the use and condition of the grip.
For grip applications on materials other than those that the
grips have been specifically designed for, consult the factory.
Examples
Grip Style
Approx. Breaking
Strength Lbs. (N)
Pulling Grips
2,500 (11,120)
Support Grips
400 (1,779)
Safety
Factor
Max. Recommended
Load Lbs. (N)
5
500 (2,224)
10
40 (178)
Catalog Number
033291196
022291004
The maximum recommended working load is the tension to be exerted on the grip in application with a margin of safety to
take care of unforeseen and unusual circumstances.
It is the end-user’s decision to determine how much of a safety factor is acceptable to for the application.
Fiber Optic Grip Materials
Material
Features
Product Group
Galvanized steel wire
• High strength
• Not subject to continuous outside environment
• Corrosion resistant for normal outside areas
• Non-magnetic
• Moderate strength
• Superior flex life
• Non-conductive
• Corrosion resistant
• Moderate strength
• Pulling grips
Tin-coated bronze wire
Non-metallic braid
• Support grips
• OPTISOK®
Approvals
CSA Certification is indicated on appropriate product catalog pages.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-51
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
OPTISOK® Pulling Grips
Kellems offers a unique and simple to use tool for the
installation of preconnectorized fiber optic cables, jumpers
and bundles of twisted pair communication cables - the
OPTISOK®.
The OPTISOK® is a highly flexible and expandable
nonmetallic sleeve open on one end and with a pulling
ring on the other. It will expand to enclose the larger group
of fiber optic connectors and grab the cable below the
connector bundle by wrapping and taping to provide a
gripping tool that will grab the cable(s) below the connectors.
The pulling ring can be attached to a pulling line or fish tape
and the OPTISOK® will act as the pulling tool.
OPTISOK® will contain and protect the connector bundle
and save time and labor by making the pulling job easier,
protecting the connectors from possible damage during the
pull and facilitating the passage of the connector bundle
through cramped and tight spaces. The OPTISOK® can be
used to pull cables through plenums, underfloor duct, office
partitions, raised access floors and conduits. Three sizes are
available for all applications.
Step 1
How to Select OPTISOK®
• Identify connector bundle diameter to be inserted into
the OPTISOK®.
• Choose appropriate catalog number based on size range.
Installation Information
Step 1
Expand open end of OPTISOK® and gently work in fiber optic
connector bundle.
Step 2
Still gently, work connector bundle up to the forward section
of the OPTISOK®.
Step 3
Starting at approximately 6" (15.2cm) from tail end of OPTISOK®,
tightly fold over the OPTISOK® around cables and tape wrapped
section 3" (7.62cm) past tail end onto the bundle.
Step 4
Securely attach pulling line or tape to pulling ring.
Step 2
Note: To remove OPTISOK® carefully unwrap tape and slide out cables and connectors or cut
OPTISOK® away without damaging connectors or cables.
Step 3
Step 4
V-52
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Fiber Optic Pulling Grips
Pulling Grip for Loose Tube Fiber Optic Cable
Kellems offers a wire mesh specifically designed to pull loose tube fiber optic cable and meet the special pulling requirements
recommended by fiber optic cable manufacturers.
Many fiber optic cable manufacturers require special cable preparation prior to pulling where a short section of the outer
jacket is stripped off exposing the aramid strength member. This creates two cable diameters, one including the jacket and
a second smaller diameter at the strength member. Kellems fiber grip with its special weave will accommodate and securely
grab both diameters, at the outside jacket and the internal aramid strength member.
Additionally, this galvanized steel mesh grip has longer leads at the pulling eye to facilitate pulling the cable up through the
top, a very low profile lug and eye to slip through tight areas, and short shoulders to protect the cable while maintaining
the slim profile.
The grip can be used to pull cable overhead as well as underground through conduit and duct. It easily mates with a swivel
and has the necessary strength to securely make pulls.
Application Information
• Prior to pulling cable, follow cable manufacturers’ cable preparation recommendations.
• Never exceed cable manufacturers’ pulling tension recommendations.
• Never use grips to approximate breaking strength safety factor of 5 recommended.
Pulling Grips for Other Outside Plant Cables,
Swivel Eye, Flexible Eye, Split Style, Low Profile
Kellems Pulling Grips for fiber optic cable are made of high strength galvanized steel strand. They feature a multiweave mesh,
with one-half the mesh length double weave, and the second half single weave. This special weave provides positive holding
power while allowing the grip to remain flexible with no damage to the cable jacket. Added features include a steel nose cone
which protects the cable end and allows the grip to pass easily through conduit and enclosures. The eye connects easily to a
swivel or a pulling line. Several grip sizes are available to accommodate all diameters of fiber optic cable.
Application
Kellems Flexible Eye Pulling Grips for fiber optic cable are used for the installation of fiber optic communication lines either
underground, overhead, through conduit or through enclosures. They will fit single cables or cable bundles, are easily
installed on the cable, and are reusable.
Benefits
•
•
•
•
•
High strength multiweave mesh for positive holding power.
Highly flexible mesh to follow the pulling path of the cable.
Steel nose cone reduces snags and hang-ups and protects cable end.
Easily installed and removed.
A dependable, reusable pulling tool.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-53
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Fiber Optic Support Grips
Support Grips for Fiber Optic Cable
Kellems Support Grips for fiber optic cable are specially designed to hold the cable weight as it hangs in a vertical or
horizontal position. Fiber optic cable must be supported and Kellems Grips provide the support easily and economically.
These grips are made of high grade, non-magnetic tin-coated bronze strand. They are offered in universal bale or single eye
configurations and are available in either closed mesh (for use where the cable end is available) or in split mesh, rod closing
(for installation on existing cable runs or at specific locations).
Split Support Grip Rod Closing Instructions
The stainless steel rod is a precise built-in feature which makes threading easy and fast. The strands of the mesh pass
around the rod and match up with the strands from the opposite direction. The rod does not touch the cable at any point and
therefore cannot cut the cable. Rod Closing Grips are reusable. They may be removed and reused as many times as desired.
Fast to Install
Step 1 Wrap the grip around the cable and thread the rod through the preformed loops with a corkscrew motion, using the
curved end of the rod to engage the loops.
Step 2 The action required is a steady push and twist simultaneously. The fingers of the left hand are used to bring the loops
together just ahead of the hook on the end of the rod.
Step 3 To remove, simply pull the rod out.
V-54
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Hose Containment Grips
Types of Attachment
IMPORTANT
The five attachment methods shown below provide unlimited flexibility
of attachment to meet any condition.
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-41 to V-42.
Type E
Double Eye Grip, used where fastening is made with eyebolts or
similar anchor terminations.
Type A
Single Eye Grip, used where fastening MUST be made from one point.
Type U
Universal Bale Grip, used to fasten around a structure or closed eye.
Type Y
Threaded bolt (⁵⁄₁₆-18 x 1½" long), used to fasten through drilled holes
in plate.
Type F
Split fitting to fit AN-818 nuts. Fitting is positioned over nut and located
with internal flange. A hose clamp is furnished and required to hold the
fitting in correct position.
Note: It should be emphasized that Kellems® Hose Containment Grips are not to be used as a pressure reinforcing device for hose systems. These grips are custom made.
Consult Technical Services for details.
Kellems Hose Containment Grips are used on high pressure, flexible hose lines to prevent the hose from whipping violently
in the event of hose failure at the fitting. These grips will prevent serious injury to personnel and damage to equipment by
holding the hose in place in the event of hose failure.
Kellems patented Hose Containment Grips are made of stainless steel with double weave mesh construction for high
strength and come complete with hose clamps.
Kellems Hose Containment Grips are supplied in diameters, length and attachments to meet individual requirements.
Contact the Wiring Device-Kellems factory for specific information. These grips help meet OSHA Federal Register 1926-302 (b),
1926-603 (9), (10), JIC H-1-1973 (H13.11) and JIC P-1-1975 (P11.34) requirements.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-55
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Strain Relief System Selection Chart
Strain Relief Grips
Kellems Strain Relief Grips are designed to prevent tension
from being transmitted to joints and terminals on electrical
cord, cable and conduit. In most applications, a Kellems
grip for strain relief is stronger than the cable itself and gives
much greater security than the use of a fitting alone. Kellems
Grips for strain relief help make electrical systems safer, and
save money by minimizing downtime from costly electrical
failure due to cable pull-out. Kellems Grips also aid in
compliance with the National Electric Code’s terminal
tension protection requirements.
Select the Correct Grip for Strain Relief
Kellems Grips for strain relief are designed to fit on electrical
cord, cable or flexible conduit.
Step 1
Step 2
Step 3
Step 4
Step 5
Refer to the chart below to determine the grip style
best suited for your application.
Determine your cable outside diameter or conduit size.
Locate environment—indoors or outdoors.
Decide if a liquidtight seal is required.
Select NPT size and fitting style.
Strain Relief System Selection Chart
Cord or Conduit
Type Fitting or
Range Inches (cm) Attachment
Page Number
Aluminum fittings,
stainless steel mesh,
neoprene oil-andwatertight bushing.
Double-single weave.
.187"-3.250"
(.47-8.25)
NPT, PG, and metric
aluminum, male straight,
45° male, 90° male,
female straight.
Thread sizes ³⁄₈"-3".
V-58, V-59,
V-62
Outdoors or indoors where
subjected to moisture or
splash. Examples are
marine and food
processing equipment.
Nylon fitting, stainless
steel mesh, double-single
weave, neoprene oil-andwatertight bushing.
.187"-1.125"
(.47-2.86)
NPT nylon, male straight,
90° male. Thread sizes
½"-1".
V-60
Deluxe Cord
Nylon Fitting/
Non-metallic
Grip
Indoor or outdoors.
Provides liquidtight seal,
where exposed to moisture.
Excellent for oil refining
and chemical processing.
Non-metallic grip is
corrosion resistant,
nonconductive and
provides superior gripping and flexing benefits.
Neoprene liquidtight
bushing. Nylon fitting.
.187"-1.000"
(.47-2.54)
NPT nylon, straight male,
V-61
thread sizes ³⁄₈"-1" 90° male,
thread sizes ½"-1".
Deluxe Cord
Stainless
Steel Fitting
And Grip
Indoor or outdoor use where
exposed to moisture. Very
strong for heavy abuse areas
such as drilling platforms,
steel mills and mines.
Stainless steel fitting
and grip for strength.
Neoprene liquidtight
bushing. Double/single
weave grip.
.187"-1.000"
(.47-2.54)
Straight male
Only with NPT
Thread sizes ½"-1".
V-61
Dust-Tight
Strain Relief
Indoor use only for wiring
of electrical enclosures,
machine tools, portable
power tools, bus drop
cable systems.
.240"-2.450"
Neoprene gasket–seals
(.61-6.22)
out chips, dirt, dust.
One piece design with
galvanized steel mesh.
Insulating bushing available.
Zinc-plated steel locknut.
Straight male NPS
or NPT
V-63
Liquidtight
Flexible
Conduit Grip
(Metal and
Non-Metallic)
Wiring of machine tools,
electrical enclosures, motors
and systems where metallic
liquidtight flexible conduit
is subjected to vibration,
flexure, motion or strain.
Stainless steel mesh,
liquidtight fittings.
Sealing “O" rings
(optional). Choice
of fittings.
.375"-4.000"
trade sizes
NPT ½"-4",
Hubbell fittings,
Male straight,
45° male, 90° male,
female straight.
V-66, V-67
Liquidtight
Flexible
Conduit Grip
(UL Type A)
Wiring or machine tools,
electrical enclosures,
motors and systems
where conduit is subject
to vibration and strain.
Stainless steel mesh,
liquidtight fittings with
“O" ring and locknut.
.375"-2.008"
trade size male
NPT steel,
Hubbell fittings,
straight male, 90°
Thread sizes ½"-2".
V-68
Grip Type
Application
Features
Deluxe Cord
Aluminum
Fitting/
Stainless
Steel Grip
Outdoors or indoors where
subjected to moisture or
splash. Examples are crane
and hoist pendant drop
stations, hand tools, pumps
and processing equipment.
Deluxe Cord
Nylon Fitting/
Stainless
Steel Grip
V-56
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Strain Relief for Flexible Cords
For Insulated Cables and Flexible, Liquidtight Conduits
Endless weave provides easy cable/flexible conduit installation
Stainless steel mesh is corrosion resistant. Can be used inside or
outside. It eliminates cable or flexible conduit pull out and reduces
costly downtime
Multiweave grip gives cable arc-of-bend control minimizing cable
damage and extending cable life. It is the strongest strain relief
device available. Meets and exceeds all code requirements;
prevents cable/conduit pull-out
A liquidtight fitting is available with both cable and conduit fittings;
prevents liquids from running through the fitting into the enclosure
An NPT and PG threaded body allows easy attachment to either
threaded hub or knock-out in box
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-57
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Deluxe Cord Grips
Aluminum Fittings, Stainless Steel Mesh, Liquidtight, for Insulated Cables
IMPORTANT
Read all breaking strength, safety
and technical data relating to this
product. Pages V-69 to V-76.
Straight Male Thread
NPT Thread
Size Inches
Grip Diameter Range
Inches
(cm)
.250"-.312"
.312"-.375"
.375"-.437"
.187"-.250"
.250"-.375"
.375"-.500"
.500"-.625"
.625"-.750"
.750"-.875"
.187"-.250"
.250"-.375"
.375"-.500"
.500"-.625"
.625"-.750"
.750"-.875"
.375"-.500"
.500"-.625"
.625"-.750"
.750"-.875"
.875"-1.000"
1.000"-1.125"
1.125"-1.250"
1.250"-1.375"
.750"-.875"
.875"-1.000"
1.000"-1.125"
1.125"-1.250"
1.250"-1.375"
.750"-.875"
.875"-1.000"
1.000"-1.125"
1.125"-1.250"
1.250"-1.375"
1.312"-1.437"
1.437"-1.562"
1.562"-1.687"
1.687"- 1.812"
1.750"-1.875"
1.250"-1.375"
1.312"-1.437"
1.437"-1.562"
1.562"-1.687"
1.687"-1.812"
1.750"- 1.875"
1.812"-1.937"
1.937"-2.062"
2.062"-2.187"
2.187"-2.312"
2.312"-2.437"
1.688"-1.812"
1.812"-1.937"
1.937"-2.062"
2.062"-2.187"
2.187"-2.312"
2.312"-2.437"
1.937"-2.062"
2.062"-2.187"
2.187"-2.312"
2.312"-2.437"
2.437"-2.625"
2.625"-2.812"
2.812"-3.000"
3.000"-3.250"
³⁄₈
½
½
¾
¾
1
1
1¼
1½
1½
2
2
2½
3
3
(.63-.79)
(.79-.95)
(.95-1.11)
(.47-.63)
(.63-.95)
(.95-1.27)
(1.27-1.59)
(1.59-1.90)
(1.90-2.22)
(.47-.63)
(.63-.95)
(.95-1.27)
(1.27-1.59)
(1.59-1.90)
(1.90-2.22)
(.95-1.27)
(1.27-1.59)
(1.59-1.90)
(1.90-2.22)
(2.22-2.54)
(2.54-2.86)
(2.86-3.17)
(3.17-3.49)
(1.90-2.22)
(2.22-2.54)
(2.54-2.86)
(2.86-3.17)
(3.17-3.49)
(1.90-2.22)
(2.22-2.54)
(2.54-2.86)
(2.86-3.17)
(3.17-3.49)
(3.33-3.65)
(3.65-3.97)
(3.97-4.28)
(4.28-4.60)
(4.44-4.76)
(3.17-3.49)
(3.33-3.65)
(3.65-3.97)
(3.97-4.28)
(4.28-4.60)
(4.44-4.76)
(4.60-4.92)
(4.92-5.24)
(5.24-5.55)
(5.55-5.87)
(5.87-6.19)
(4.29-4.60)
(4.60-4.92)
(4.92-5.24)
(5.24-5.55)
(5.55-5.87)
(5.87-6.19)
(4.92-5.24)
(5.24-5.55)
(5.55-5.87)
(5.87-6.19)
(6.19-6.67)
(6.67-7.14)
(7.14-7.62)
(7.62-8.25)
Form Size
F1
F2
F3
F2
F3
F4
F5
F5
F5
F6
F6
F7
F7
F7
F8
Catalog Number
07401001
07401002
07401003
07401004
07401006
07401008
07401010
074011247*
074011248*
07401011
07401013
07401015
07401017
07401018
074011249*
074011195
07401019
07401021
07401023
07401025
074011250*
074011028*
074011029*
074011251
07401026
07401027
07401028
074011178*
074011252
07401029
07401030
07401031
07401032
074011253
074011254*
074011255*
074011256*
074011257*
074011258
074011259
07401033
07401034
07401035
074011260
074011261
074011262*
074011263*
074011264*
074011265*
074011030
074011031
074011032
074011033
074011034
074011266*
074011036
074011037
074011038
074011039
074011186
074011187
074011188
074011189*
Note: Kellems® Deluxe Cord Grips are suitable for use in hazardous locations per Class I Div. 2, Class II Div. 1 & 2, Class III
Div. 1 & 2 of the National Electric Code Sections 501.10(b)(2), 502.10(a)(2), 502.10(b)(2), 503.10(a)(2) and 503.10(b).
*Cable jacket may have to be stripped to pass through connector body.
V-58
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Deluxe Cord Grips
Aluminum Fittings, Stainless Steel Mesh, Liquidtight, for Insulated Cables
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-69 to V-76.
Straight Female Thread
NPT Thread
Size Inches
Grip Diameter Range
Inches
(cm)
½
.375"-.500"
.500"-.625"
(.95-1.27)
(1.27-1.59)
F2
07401043
07401045
¾
.500"-.625"
(1.27-1.59)
F2
07401052
¾
.625"-.750"
(1.59-1.90)
F4
07401053
Form Size
Catalog Number
90° Male Thread
NPT Thread
Size Inches
Grip Diameter Range
Inches
(cm)
³⁄₈
.250"-.312"
.312"-.375"
.375"-.437"
(.63-.79)
(.79-.95)
(.95-1.11)
½
.187"-.250"
.250"-.375"
.375"-.500"
.500"-.625"
(.47-.63)
(.63-.95)
(.95-1.27)
(1.27-1.59)
¾
.375"-.500"
.500"-.625"
.625"-.750"
.750"-.875"
(.95-1.27)
(1.27-1.59)
(1.59-1.90)
(1.90-2.22)
1
.500"-.625"
.625"-.750"
.750"-.875"
.875"-1.000"
1.000"-1.125"
(1.27-1.59)
(1.59-1.90)
(1.90-2.22)
(2.22-2.54)
(2.54-2.86)
1¼
.750"-.875"
.875"-1.000"
1.000"-1.125"
1.125"-1.250"
1½
2
Form Size
Catalog Number
F1
07401071
07401072
07401073
F2
07401074
07401076
07401078
07401080*
F3
07401081
07401083
07401084*
074011275*
F4
07401085
07401087
07401089
07401091*
074011229*
(1.90-2.22)
(2.22-2.54)
(2.54-2.86)
(2.86-3.17)
F5
074011230
07401137
07401108
074011042*
1.000"-1.125"
1.125"-1.250"
1.250"-1.375"
(2.54-2.86)
(2.86-3.17)
(3.17-3.49)
F5
074011045
074011046
074011047
1.312"-1.437"
1.437"-1.562"
1.687"-1.812"
1.750"-1.875"
(3.33-3.65)
(3.65-3.97)
(4.28-4.60)
(4.44-4.76)
F6
074011233
074011244
074011246
074011234*
45° Male Thread
NPT Thread
Size Inches
Grip Diameter Range
Inches
(cm)
½
.250"-.375"
.375"-.500"
.500"-.625"
(.63-.95)
(.95-1.27)
(1.27-1.59)
F2
074011236
074011021
074011237*
¾
.500"-.625"
.625"-.750"
.750"-.875"
(1.27-1.59)
(1.59-1.90)
(1.90-2.22)
F3
074011049
074011051*
074011239*
1
.625"-.750"
.750"-.875"
.875"-1.000"
(1.59-1.90)
(1.90-2.22)
(2.22-2.54)
F4
074011055
074011057
074011199*
1¼
1.000"-1.125"
1.125"-1.250"
(2.54-2.86)
(2.86-3.17)
F5
074011059
074011060
Form Size
Catalog Number
Note: Kellems® Deluxe Cord Grips are suitable for use in hazardous locations per Class I Div. 2, Class II Div. 1 & 2, Class III Div. 1 & 2 of
the National Electric Code Sections 501.10(b)(2), 502.10(a)(2), 502.10(b)(2), 503.10(a)(2) and 503.10(b).
*Cable jacket may have to be stripped to pass through connector body.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-59
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Deluxe Cord Grips
Nylon Fittings, Stainless Steel Mesh, Liquidtight, for Insulated Cables
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-69 to V-76.
Straight Male Thread
NPT Thread
Size Inches
½
¾
1
Grip Diameter Range
Inches
(cm)
.187"-.250"
(.47-.63)
.250"-.375"
(.63-.95)
.375"-.500"
(.95-1.27)
.500"-.625"
(1.27-1.59)
.375"-.500"
(.95-1.27)
.500"-.625"
(1.27-1.59)
.625"-.750"
(1.59-1.90)
.750"-.875"
(1.90-2.22)
.625"-.750"
(1.59-1.90)
.750"-.875"
(1.90-2.22)
.875"-1.000"
(2.22-2.54)
1.000"-1.125"
(2.54-2.86)
Form Size
Catalog Number
F2
074011331
074011332
074011333
074011334*
F3
074011335
074011336
074011337
074011338*
F4
074011341
074011342
074011343
074011344*
90° Male Thread
NPT Thread
Size Inches
½
¾
Note:
V-60
Grip Diameter Range
Inches
(cm)
.250"-.375"
(.63-.95)
.375"-.500"
(.95-1.27)
.500"-.625"
(1.27-1.59)
.375"-.500"
(.95-1.27)
.500"-.625"
(1.27-1.59)
.625"-.750"
(1.59-1.90)
Form Size
Catalog Number
F2
074011346
074011347
074011348*
F3
074011349
074011350
074011351*
Kellems®
Deluxe Cord Grips are suitable for use in hazardous locations per Class I Div. 2, Class II Div. 1 & 2, Class III Div. 1 & 2 of
the National Electric Code Sections 501.10(b)(2), 502.10(a)(2), 502.10(b)(2), 503.10(a)(2) and 503.10(b).
*Cable jacket may have to be stripped to pass through connector body.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Deluxe Cord Grips
Nylon Fittings, Non-metallic Mesh, and Stainless Steel Fittings, Stainless Steel Mesh, Liquidtight, for Insulated Cables
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-69 to V-76.
Nylon Fittings Non-metallic Mesh, Liquidtight for Insulated Cables
Straight Male Thread
NPT Thread
Size Inches
Grip Diameter Range
Inches
(cm)
³⁄₈
.187"-.250"
.250"-.312"
.312"-.375"
(.47-.63)
(.63-.79)
(.79-.95)
F1
CG304NM
CG305NM
CG306NM
½
.187"-.250"
.250"-.375"
.375"-.500"
(.47-.63)
(.63-.95)
(.95-1.27)
F2
CG404NM
CG406NM
CG408NM
¾
.375"-.500"
.500"-.625"
.625"-.750"
(.95-1.27)
(1.27-1.59)
(1.59-1.90)
F3
CG608NM
CG610NM
CG612NM
1
.500"-.625"
.625"-.750"
.750"-.875"
.875"-1.000"
(1.27-1.59)
(1.59-1.90)
(1.90-2.22)
(2.22-2.54)
F4
CG810NM
CG812NM
CG814NM
CG816NM
Form Size
Catalog Number
90° Male Thread
NPT Thread
Size Inches
Grip Diameter Range
Inches
(cm)
Form Size
Catalog Number
½
.250"-.375"
.375"-.500"
(.63-.95)
(.95-1.27)
F2
CG40690NM
CG40890NM
¾
.375"-.500"
.500"-.625"
.625"-.750"
(.95-1.27)
(1.27-1.59)
(1.59-1.90)
F3
CG60890NM
CG61090NM
CG61290NM*
1
.625"-.750"
.750"-.875"
(1.59-1.90)
(1.90-2.22)
F4
CG81290NM
CG81490NM
Stainless Steel Fittings, Stainless Steel Mesh, Liquidtight for Insulated Cables
Straight Male Thread
NPT Thread
Size Inches
Grip Diameter Range
Inches
(cm)
½
.187"-.250"
.250"-.375"
.375"-.500"
.500"-.625"
(.47-.63)
(.63-.95)
(.95-1.27)
(1.27-1.59)
F2
CG404SST
CG406SST
CG408SST
CG410SST
¾
.375"-.500"
.500"-.625"
(.95-1.27)
(1.27-1.59)
F2
CG608SST
CG610SST
¾
.625"-.750"
.750"-.875"
(1.59-1.90)
(1.90-2.22)
F3
CG612SST
CG614SST
1
.500"-.625"
.625"-.750"
.750"-.875"
.875"-1.000"
(1.27-1.59)
(1.59-1.90)
(1.90-2.22)
(2.22-2.54)
F4
CG810SST
CG812SST
CG814SST
CG816SST
Form Size
Catalog Number
Note: Kellems® Deluxe Cord Grips are suitable for use in hazardous locations per Class I Div. 2, Class II Div. 1 & 2, Class III Div. 1 & 2 of the
National Electric Code Sections 501.10(b)(2), 502.10(a)(2), 502.10(b)(2), 503.10(a)(2) and 503.10(b).
*Cable jacket may have to be stripped to pass through connector body.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-61
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
PG and Metric Threaded Deluxe Cord Grips
Aluminum Fittings, Stainless Steel Mesh, Liquidtight, for Insulated Cables
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-69 to V-76.
Straight PG* Male Thread
Hub Size
Cord Diameter Range
Inches
(cm)
Form Size
Catalog Number
PG16
.500"-.625"
(1.27-1.59)
F2
074PG16010
PG21
.500"-.625"
(1.27-1.59)
F2
074PG21010
PG21
.625"-.750"
.750"-.875"
(1.59-1.90)
(1.90-2.22)
F3
074PG211247
074PG211248
PG29
.625"-.750"
.750"-.875"
.875"-1.000"
(1.59-1.90)
(1.90-2.22)
(2.22-2.54)
F4
074PG29021
074PG29023
074PG29025
PG29
1.125"-1.250"
(2.86-3.17)
F5
074PG291028*
PG36
1.125"-1.250"
(2.86-3.17)
F5
074PG36028*
Note: *Panzergewinde.
Straight Metric Male Thread
Hub Size
Cord Diameter Range
Inches
(cm)
M20
.500"-.625"
(1.27-1.59)
F2
074M20010
M25
.625"-.750"
.750"-.875"
(1.59-1.90)
(1.90-2.22)
F3
074M251247
074M251248
M25
.500"-.625"
(1.27-1.59)
F2
074M25017
M32
.625"-.750"
.750"-.875"
.875"-1.000"
(1.59-1.90)
(1.90-2.22)
(2.24-2.54)
F4
074M32021
074M32023
074M32025
M32
1.000"-1.125"
1.125"-1.250"
(2.54-2.86)
(2.86-3.17)
F5
074M321250
074M321028
Form Size
Catalog Number
Note: Kellems® Deluxe Cord Grips are suitable for use in hazardous locations per Class I Div. 2, Class II Div. 1 & 2, Class III Div. 1 & 2 of the
National Electric Code Sections 501.10(b)(2), 502.10(a)(2), 502.10(b)(2), 503.10(a)(2) and 503.10(b).
*Cable jacket may have to be stripped to pass through connector body.
Specifications
Material
Temperature Range
Aluminum (Body)
Stainless Steel (Mesh)
Neoprene (Bushings)
–30°F to +240°F (–34°C to +115°C).
–30°F to +240°F (–34°C to +115°C).
–30°F to +240°F (–34°C to +115°C).
Hazardous Locations
Suitable for use in hazardous locations per Class I Div. 2,
Class II Div. 1 & 2, Class III Div. 1 & 2 N.E.C.
Reference 501.10(b)(2), 502.10(a)(2), 502.10(b)(2), 503.10(a)(2) and 503.10(b).
Approvals
V-62
Deluxe Cord Grips
UL Listed in accordance with Standard 514B for indoor/outdoor use.
UL Control numbers 898D and 899D.
Wet Locations
Suitable for use in wet locations when used with a listed sealing ring between box and fitting.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Dust-Tight Strain Relief Grips
Aluminum Fittings, Galvanized Steel Mesh, for Insulated Cables
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-69 to V-76.
Non-Insulated, Wide Range Strain Relief
Thread Size
Cable Diameter Range
Inches
(cm)
Mesh Length
@ Nom. Dia.
Inches (cm)
Catalog Number
½ NPT
.24"-.32"
(.61-.81)
3.25" (8.25)
073031200
½ NPT
.32"-.43"
(.81-1.09)
3.75" (9.52)
073031201
½ NPT
.43"-.54"
(1.09-1.37)
4.75" (12.06)
073031202
¾ NPT
.54"-.73"
(1.37-1.85)
6.5" (16.51)
073031203
1 NPT
.73"-.97"
(1.85-2.46)
7" (17.78)
073031204
1¼ NPT
.97"-1.25"
(2.46-3.17)
9" (22.86)
073031205
PG29*
.73"-.97"
(1.85-2.46)
7" (17.78)
073PG291204
Note: *Panzergewinde.
Insulated, Wide Range Strain Relief with Insulating Bushing
Thread Size
Cable Diameter Range
Inches
(cm)
Mesh Length
@ Nom. Dia.
Inches (cm)
Dim. A
Inches (cm)
Min. Space
Between Grips
Inches (cm)
Catalog Number
½ NPS
.24"-.32"
(.61-.81)
3.25" (8.25)
1" (2.54)
1.25" (3.17)
073031206
½ NPS
.32"-.43"
(.81-1.09)
3.75" (9.52)
1" (2.54)
1.25" (3.17)
073031207
½ NPS
.43"-.54"
(1.09-1.37)
4.75" (12.06)
1" (2.54)
1.25" (3.17)
073031208
¾ NPS
.54"-.73"
(1.37-1.85)
6.5" (16.51)
1" (2.54)
1.5" (3.81)
073031209
1 NPS
.73"-.97"
(1.85-2.46)
7" (17.78)
1.313" (3.02)
1.75" (4.44)
073031210
1¼ NPS
.97"-1.25"
(2.46-3.17)
9" (22.86)
1.313" (3.02)
2.25" (5.71)
073031211
1½ NPT
1.25"-1.50"
(3.17-3.81)
11.75" (29.84)
1.313" (3.02)
2.5" (6.35)
073031212
2 NPT
1.50"-1.70"
(3.81-4.32)
13.25" (33.65)
1.375" (3.49)
3.25" (8.25)
073031213
2½ NPT
1.70"-2.00"
(4.32-5.08)
13.5" (34.29)
1.5" (3.81)
3.625" (9.21)
073031214
2½ NPT
2.00"-2.45"
(5.08-6.22)
13.75" (34.92)
1.5" (3.81)
3.625" (9.21)
073031215
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-63
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
I-Grips
Plastic-Coated, Galvanized Steel Mesh for Insulated Cables
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-69 to V-76.
Application
Kellems® I-Grips will fit 2, 3, 4 and 5 wire Hubbell Insulgrip® plugs and connector bodies. The eye tabs fit
under the nylon cord clamp and the screws slide through the eyelets, securing the grip in place.
These grips are for indoor use only.
Benefits
• Easily attached to Insulgrip plugs and connector bodies.
• Controls cable arc-of-bend.
• Provides heavy-duty strain relief.
• Fits all sizes.
I-Grips
Cable Diameter Range
Inches
(cm)
E
Inches (cm)
M
Inches (cm)
Catalog Number
.32"-.43"
(.81-1.09)
1.25" (3.17)
4" (10.16)
07310001
.43"-.56"
(1.09-1.42)
1.25" (3.17)
4.75" (12.06)
07310002
.56"-.73"
(1.42-1.85)
1.50" (3.81)
6" (15.24)
07310003
.73"-.85"
(1.85-2.16)
1.50" (3.81)
6.5" (16.51)
07310004
.85"-1.00"
(2.16-2.54)
1.50" (3.81)
8" (20.32)
07310005
1.00"-1.25"
(2.54-3.17)
1.50" (3.81)
10" (25.40)
07310006
Note: E-Eye length. M-Mesh length at nominal diameter.
Eyelet hole diameter .203" (.52cm).
I-Grips should not be used on Insulgrip devices when “Seal-Tite®” weatherproof covers are to be installed.
V-64
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Thread Adapters for Multi-Pin Connectors
Aluminum
Thread Adapters for Multi-Pin Connectors
Kellems® Thread Adapters are devices formatting AN-MS
connectors and other multi-pin connectors to Kellems grips
with NPT threaded fittings. They are made of aluminum
with internal threads and replace the connector cord clamp.
These adapters permit the installation of Kellems Grips, to
prevent cable or conduit pull-out and control arc-of-bend.
Applications
Thread adapters allow the installation of Kellems® Grips
on multi-pin connectors at electrical consoles, mobile
equipment, control switches, assembly equipment and
testing machines.
Benefits
• Easy installation.
• Allows the use of Kellems grips.
• Extends connector and cable life.
Thread Adapters for Multi-Pin Connectors
Thread Adapters
AN-MS
Connector
Size**
AN-MS
Thread
Cable Clamp Size A
Number*** Inch
Deluxe Cord Grips
NPT
Thread Catalog
Size B Number
Liquidtight
Conduit Grips
(Insulated Throat)
Strain Relief Grips
Cable Diameter
Range Inches (cm)
Catalog
Number
Cable Diameter
Range Inches (cm)
Catalog
Number
Catalog
Number
.24"-.32" (.61-.81)
.32"-.43" (.81-1.09)
.43"-.54" (1.09-1.37)
073031200
073031201
073031202
—
074093512
—
8S, 10S
3057-3
10SL, 12, 12S 3057-4
14, 14S
3057-6
½" x 28"
⁵⁄₈" x 24"
¾" x 20"
³⁄₈
091041000
091041001
091041002
.250"-.312" (.63-.79)
.312"-.375" (.79-.95)
.375"-.437" (.95-1.11)
07401001
07401002
07401003
14, 14S
16, 16S
18
3057-6
3057-8
3057-10
¾" x 20"
⁷⁄₈" x 20"
1" x 20"
½
091041003
091041004
091041006
.187"-.250" (.47-.63
.250"-.375" (.63-.95)
.375"-.500" (.95-1.27)
.500"-.625" (1.27-1.59)
07401004
07401006
07401008
07401010*
16, 16S
18
20, 22
3057-8
3057-10
3057-12
⁷⁄₈" x 20"
1" x 20"
1³⁄₁₆" x 18"
091041005
091041007
091041008
.187"-.250" (.47-.63)
.250"-.375" (.63-.95)
.375"-.500" (.95-1.27)
.500"-.625" (1.27-1.59)
.625"-.750" (1.59-1.90)
07401011
07401013
07401015
07401017
07401018
.54"-.74" (1.37-1.85)
073031203
074093513
20, 22
24, 28
32
36
3057-12
3057-16
3057-20
3057-24
1³⁄₁₆" x 18"
1⁷⁄₁₆" x 18"
1¾" x 18"
2" x 18"
091041009
091041010
091041012
091041015
.375"-.500" (.95-1.27)
.500"-.625" (1.27-1.59)
.625"-.750" (1.59-1.90)
.750"-.875" (1.90-2.22)
.875"-1.000" (2.22-2.54)
074011195
07401019
07401021
07401023
07401025
.73"-.97" (1.85-2.46)
073031204
074093514
24, 28
32
36
3057-16
3057-20
3057-24
1⁷⁄₁₆" x 18"
1¾" x 18"
2" x 18"
1¼
091041011
091041013
091041016
.750"-.875" (1.90-2.22)
.875"-1.000" (2.22-2.54)
1.000"-1.125" (2.54-2.86)
1.125"-1.375" (2.86-3.17)
074011251
07401026
07401027
07401028
.97"-1.25" (2.46-3.17) 073031205
074093515
32
36
40
3057-20
3057-24
3057-28
1¾" x 18"
2" x 18"
2¼" x 16"
1½
091041014
091041017
091041019
.875"-1.000" (2.22-2.54)
1.000"-1.125" (2.54-2.86)
1.125"-1.250" (2.86-3.17)
1.250"-1.375" (3.17-3.49)
07401029
07401030
07401031
07401032
¾
1
—
074093516
Note: *Cable jacket may have to be stripped to pass through connector body.
**Number stamped on connector shell.
***Number stamped on clamp shell.
Example
Thread Adapter
091041006
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-65
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Strain Relief for Liquidtight Conduit
Steel Fitting, Stainless Steel Mesh for Liquidtight Metal Conduit and PolyTuff® I Non-Metallic Conduit
Benefits
IMPORTANT
• Helps prevent conduit pull-out and damage at the fitting.
• Reduces equipment downtime.
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-74 to V-76.
Straight With Male Fitting
Conduit
Trade Size
Inches
NPT
Fitting Size
Inches
Mesh Length
Inches (cm)
Catalog Number
(Insulated)
Catalog Number
(Non-insulated)
³⁄₈
½
3"
(7.62)
074093511
074093401
½
½
3.5"
(8.89)
074093512
074093402
¾
¾
4"
(10.16)
074093513
074093403
1
1
5"
(12.70)
074093514
074093404
1¼
1¼
6"
(15.24)
074093515
074093405
1½
1½
6.75"
(17.14)
074093516
074093406
2
2
8"
(20.32)
074093518
074093408
2½
2½
9.75"
(24.76)
074093520
074093410
3
3
11"
(27.94)
074093522
074093412
4
4
14"
(35.56)
074093526
—
90° Angle With Male Fitting
Conduit
Trade Size
Inches
NPT
Fitting Size
Inches
Mesh Length
Inches (cm)
Catalog Number
(Insulated)
Catalog Number
(Non-insulated)
³⁄₈
½
3"
(7.62)
074093541
074093421
½
½
3.5"
(8.89)
074093542
074093422
¾
¾
4"
(10.16)
074093543
074093423
1
1
5"
(12.70)
074093544
074093424
1¼
1¼
6"
(15.24)
074093545
074093425
1½
1½
6.75"
(17.14)
074093546
074093426
2
2
8"
(20.32)
074093548
074093428
2½
2½
9.75"
(24.76)
074093550
—
3
3
11"
(27.94)
074093552
—
Note: For use with Liquidtight Metal conduit and PolyTuff ® I Non-Metallic conduit.
V-66
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Strain Relief for Liquidtight Conduit
Steel Fitting, Stainless Steel Mesh for Liquidtight Metal Conduit and PolyTuff® I Non-Metallic Conduit
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Pages V-74 to V-76.
Straight With Chase Fitting
Conduit
Trade Size
Inches
NPT
Fitting Size
Inches
Mesh Length
Inches
(cm)
Catalog Number
½
½
3.5"
(8.89)
07406079
¾
¾
4"
(10.16)
07406080
1
1
5"
(12.70)
07406081
1¼
1¼
6"
(15.24)
07406082
1½
1½
6.75"
(17.14)
07406083
45° Angle With Male Fitting
Conduit
Trade Size
Inches
NPT
Fitting Size
Inches
Mesh Length
Inches
(cm)
Catalog Number
(Insulated)
Catalog Number
(Non-insulated)
³⁄₈
½
3"
(7.62)
074093561
074093441
½
½
3.5"
(8.89)
074093562
074093442
¾
¾
4"
(10.16)
074093563
074093443
1
1
5"
(12.70)
074093564
074093444
1¼
1¼
6"
(15.24)
074093565
074093445
1½
1½
6.75"
(17.14)
074093566
074093446
2
2
8"
(20.32)
074093568
074093448
Note: For use with Liquidtight Metal conduit and
www.hubbell-wiring.com
PolyTuff ®
I Non-Metallic conduit.
®
Wiring Device-Kellems
V-67
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Strain Relief for Liquidtight Conduit
Steel Fitting, Stainless Steel Mesh for UL Type A Liquidtight Conduit
IMPORTANT
Read all breaking strength,
safety and technical data
relating to this product.
Page V-76
Straight Male Hubbell Fitting
Conduit
Trade Size
Inches
NPT
Fitting Size
Inches
Mesh Length
Inches
(cm)
Catalog Number
³⁄₈
½
3.75"
(9.52)
H038CNK
½
½
4.5"
(11.43)
H050CNK
¾
¾
6.25"
(15.87)
H075CNK
1
1
7.5"
(19.05)
H100CNK
1¼
1¼
9"
(22.86)
H125CNK
1½
1½
13.5"
(34.29)
H150CNK
2
2
14.5"
(36.83)
H200CNK
90° Male Hubbell Fitting
V-68
Conduit
Trade Size
Inches
NPT
Fitting Size
Inches
Mesh Length
Inches
(cm)
Catalog Number
³⁄₈
½
3.75"
(9.52)
H0389CNK
½
½
4.5"
(11.43)
H0509CNK
¾
¾
6.25"
(15.87)
H0759CNK
1
1
7.5"
(19.05)
H1009CNK
1¼
1¼
9"
(22.86)
H1259CNK
1½
1½
13.5"
(34.29)
H1509CNK
2
2
14.5"
(36.83)
H2009CNK
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Strain Relief Grips
Wire Mesh Grip Materials
Material
Features
Product Group
Galvanized steel wire
• High strength
• Not subject to continuous outside environment
• High strength
• Corrosion resistant
• Slightly magnetic
• Superior flex life
• Non-conductive
• Corrosion resistant
• Moderate strength
• Strain relief grips
• I-Grips
• Deluxe cord grips
• Liquidtight, flexible, metal conduit grips
• UL type A conduit grips
• Non-metallic deluxe cord grips
Stainless steel wire
(302/304)
Non-metallic strand
Operating Temperatures
Material
Temperature Range
Aluminum
–40°F to +300°F (–40°C to +149°C).
Aluminum Deluxe Cord Grips
–30°F to +240°F (–34°C to +115°C).
Non-Metallic Deluxe Cord Grips
–30°F to +225°F (–34°C to +107°C).
Nylon
–40°F to +225°F (–40°C to +107°C).
Nylon Fitting with Stainless Steel Mesh
–40°F to +225°F (–40°C to +107°C).
Stainless Steel
–60°F to +1000°F (–51°C to +537°C).
Stainless Steel Deluxe Cord Grips
–30°F to +240°F (–34°C to +115°C).
Neoprene (Bushings)
–30°F to +240°F (–34°C to +115°C).
Hazardous Locations
Product Categories
The product categories listed to the right are suitable
for use in hazardous locations per Class I Div. 2,
Class II Div. 1 & 2, Class III Div. 1 & 2.
Deluxe cord grip, aluminum fitting;
Deluxe cord grip, nylon fitting;
Deluxe cord grip, non-metallic;
Sealtite conduit grips;
Dustight strain relief grips.
Flammability
Non-metallic deluxe cord grips will not support combustion. Listed below are the ratings.
Component
Rating
Mesh grip
UL 94HB.
Fitting
UL 94V-2.
Approvals
UL Listing and CSA Certification are indicated on appropriate product catalog pages.
Agency
UL Control Number
Underwriters Laboratories Inc.
898D and 899D.
UL Listed in accordance with Standard 514B for indoor/outdoor use.
Wet Locations
Product Categories
The products noted to the right are suitable
for use in wet locations when a listed sealing
ring is used between box and fitting.
www.hubbell-wiring.com
Deluxe cord grip, aluminum fitting;
Deluxe sealing ring cord grip;
Deluxe cord grip, non-metallic;
Sealtite conduit grips;
Hubbell non-metallic conduit grips;
Cord connectors;
Hubbell Juniors;
PolyTuff ® connectors;
Hubbell sealtite conduit connectors.
®
Wiring Device-Kellems
V-69
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Strain Relief Grips
Form Size Definition
The term “Form Size” refers to the physical mass or overall dimensions of a cord connector. Form 1 is the smallest size,
Form 8 is the largest size.
Knockout Holes
NPT
Hub Size
Inches
Knockout Hole Recommended
Min. to Max. Inches (cm)
¼
.540"
to .570"
(1.37-1.45)
³⁄₈
.671"
to .701"
(1.70-1.78)
½
.859"
to .906"
(2.18-2.30)
¾
1.094" to 1.141"
(2.78-2.90)
1
1.359" to 1.406"
(3.45-3.57)
1¼
1.719" to 1.766"
(4.37-4.49)
1½
1.969" to 2.016"
(5.00-5.12)
2
2.453" to 2.500"
(6.23-6.35)
2½
2.953" to 3.000"
(7.50-7.62)
3
3.578" to 3.625"
(9.09-9.21)
Product Data
Deluxe Cord Grips, Liquidtight for Insulated Cables
Deluxe Cord Grips helps to alleviate pull tension on terminals, control cable arc-of-bend, prevent cord pull-out, and provide
a liquidtight seal. They are offered with either aluminum, stainless steel or nylon fittings in a variety of configurations and NPT
thread sizes. Additionally, a completely non-metallic product is offered on page V-61.
Application
Deluxe Cord Grips are used indoors or outdoors to help prevent cord pull-out, and where cables are subjected to moisture,
splash or submersion. Specific uses are: wiring enclosures, pendant stations, hand tools, construction, processing and
material handling equipment, pumps, motors and machine tools.
Benefits
• Helps to prevent cable pull-out.
• Controls cable arc-of-bend.
• Provides a liquidtight seal.
• Corrosion resistant stainless steel mesh with aluminum collar.
V-70
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Strain Relief Grips
Deluxe Cord Grips Fitting Dimensions
Straight Hubbell Connectors
Aluminum, Inches (cm)
F
NPT
Inches
A
Form Dia.
B
C
Ref.
Nylon, Inches (cm)
E
D
Throat
Dia.
A/C*
A/F*
A
B
Dia.
Ref.
Stainless Steel, Inches (cm)
C
E
D
Throat
Dia.
A/C*
A
A/F*
A/C*
B
A/F*
C
Ref.
E
D
Throat
Dia.
A/C*
A/F*
³⁄₈-18
1 .88"
.90"
.46"
(2.24) (2.29) (1.17)
.44"
(1.12)
.99"
(2.51)
.88"
1.00" 1.10" .43"
.45"
(2.24) (2.54) (2.79) (1.09) (1.14)
1.00" .93"
1.01" .88"
.90"
.46"
(2.54) (2.36) (2.57) (2.24) (2.29) (1.17)
.45"
(1.14)
.87"
.75"
(2.21) (1.90)
½-14
1 .88"
.90"
.46"
(2.24) (2.29) (1.17)
.44"
(1.12)
.99"
(2.51)
.88"
1.00" 1.10" .43"
.45"
(2.24) (2.54) (2.79) (1.09) (1.14)
1.00" .93"
—
(2.54) (2.36)
—
—
½-14
2 1.13" 1.10" .55"
.64"
1.11" 1.00" 1.32" 1.50" .53"
.58"
(2.87) (2.79) (1.40) (1.63) (2.82) (2.54) (3.35) (3.81) (1.35) (1.47)
1.25"
(3.17)
1.12" 1.30" 1.13" 1.10" .54"
.63"
1.16" 1.00"
(2.84) (3.30) (2.87) (2.79) (1.37) (1.60) (2.95) (2.54)
½-14
3 1.38"
(3.51)
—
—
—
—
—
—
—
—
—
—
—
—
—
¾-14
2 1.13" 1.10" .55"
.64"
1.29" 1.13" —
(2.87) (2.79) (1.40) (1.63) (3.28) (2.87)
—
—
—
—
—
—
—
—
—
—
—
—
¾-14
3 1.38"
(3.51)
1.50" .55"
.82"
1.40" 1.25"
(3.81) (1.40) (2.08) (3.56) (3.17)
1.56" 1.60" .55"
.77"
1.44" 1.31" 1.59" 1.38"
(3.96) (4.06) (1.40) (1.96) (3.66) (3.33) (4.04) (3.51)
1.30" .56"
(3.30) (1.42)
.81"
1.44" 1.25"
(2.06) (3.66) (3.17)
1-11½
3 —
—
—
—
—
1-11½
4 1.75" 1.60" .71"
1.02" 1.81" 1.62"
(4.44) (4.06) (1.80) (2.59) (4.60) (4.11)
1-11½
5 2.31" 1.70" .66"
1.01" 2.28" 2.00" —
(5.87) (4.32) (1.68) (2.57) (5.79) (5.08)
—
1¼-11½
5 2.31" 1.70" .74"
1.26" 2.28" 2.12" —
(5.87) (4.32) (1.88) (3.20) (5.79) (5.38)
1½-11
5 2.31" 1.70" .74"
1.38"
(5.87) (4.32) (1.88) (3.51)
1.50" .55"
.64"
1.40" 1.25"
(3.81) (1.40) (1.63) (3.56) (3.17)
—
—
—
—
—
—
—
—
—
—
—
1.01" 1.84" 1.63"
(2.57) (4.67) (4.14)
2.02"
(5.13)
1.75" 1.40" .70"
(4.44) (3.56) (1.78)
1.03" 1.88" 1.63"
(2.62) (4.78) (4.14)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.28" 2.12" —
(5.79) (5.38)
—
—
—
—
—
—
—
—
—
—
—
—
1½-11½
6 3.00" 2.20" .75"
1.50" 2.97" 2.75" —
(7.62) (5.59) (1.90) (3.81) (7.54) (6.98)
—
—
—
—
—
—
—
—
—
—
—
—
2-11½
6 3.00" 2.20" .80"
1.92" 3.24" 3.00" —
(7.62) (5.59) (2.03) (4.88) (8.24) (7.62)
—
—
—
—
—
—
—
—
—
—
—
—
2-11½
7 3.85" 2.70" .88"
1.94" 4.05" 3.75" —
(9.78) (6.86) (2.24) (4.93) (10.29) (9.52)
—
—
—
—
—
—
—
—
—
—
—
—
2½-8
7 3.85" 2.70" 1.30" 2.32" 4.34" 4.02" —
(9.78) (6.86) (3.30) (5.89) (11.02) (10.21)
—
—
—
—
—
—
—
—
—
—
—
—
2½-8
8 4.75" 2.70" 1.25"
(12.06) (6.86) (3.17)
2.38" 4.86" 4.50" —
(6.05) (12.34) (11.43)
—
—
—
—
—
—
—
—
—
—
—
—
3-8
7 3.85" 2.70" 1.30" 2.54" 4.34" 4.01" —
(9.78) (6.86) (3.30) (6.45) (11.02) (10.21)
—
—
—
—
—
—
—
—
—
—
—
—
3-8
8 4.50" 2.70" 1.38"
(11.43) (6.86) (3.51)
—
—
—
—
—
—
—
—
—
—
—
—
3.00" 4.86" 4.50" —
(7.62) (12.34) (11.43)
—
—
—
1.88" 1.75" .70"
(4.78) (4.44) (1.78)
—
—
—
Note: *A/C— Across Corners; A/F—Across Flats.
A
(Overall)
B Ref.
E
F
C
D
Dimensions shown are approximate and
are subject to change without notice.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-71
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Strain Relief Grips
Deluxe Cord Grips Fitting Dimensions
45° Hubbell Connectors
Aluminum, Inches (cm)
G
B Ref.
A
Ref.
E
C
F
D
F
NPT
Inches
A
B
Form
Ref.
Ref.
½-14
2
2.00"
(5.08)
¾-14
3
1-11½
E
C
D
Throat
Dia.
Across
Comers
Across
Flats
1.90"
(4.83)
.550"
(1.40)
.560"
(1.42)
1.270"
(3.23)
1.110"
(2.79)
1.125"
(2.86)
2.30"
(5.84)
2.50"
(6.53)
.560"
(1.42)
.750"
(1.90)
1.480"
(3.76)
1.281"
(3.25)
1.375"
(3.49)
4
2.60"
(6.60)
2.80"
(7.11)
.700"
(1.78)
1.000"
(2.54)
1.690"
(4.29)
1.500"
(3.81)
1.750"
(4.44)
1¼-11½
5
3.90"
(9.91)
3.90"
(9.91)
.740"
(1.88)
1.250"
(3.17)
2.45"
(6.22)
2.125"
(5.40)
2.310"
(5.87)
1½-11½
5
3.90"
(9.91)
3.90"
(9.91)
.740"
(1.88)
1.500"
(3.81)
2.45"
(6.22)
2.125"
(5.40)
2.310"
(5.87)
G
Dia.
90° Hubbell Connectors
Aluminum, Inches (cm)
F
NPT
Inches
A
B
Form
³⁄₈-18
1
1.27"
(3.23)
½-14
2
¾-14
Nylon, Inches (cm)
C
D
Throat
Dia.
A
B
A/C*
A/F*
Dia.
2.00"
(5.08)
.460"
(1.17)
.440"
(1.12)
1.15"
(2.92)
1.10"
(2.79)
.875"
(2.22)
—
1.56"
(3.96)
2.30"
(5.84)
.500"
(1.27)
.546"
(1.39)
1.30"
(3.30)
1.13"
(2.87)
1.125"
(2.86)
3
1.79"
(4.55)
2.80"
(7.11)
.560"
(1.42)
.765"
(1.94)
1.49"
(3.78)
1.31"
(3.33)
1-11½
4
2.08"
(5.28)
3.20"
(8.13)
.700"
(1.78)
1.000"
(2.54)
1.70"
(4.32)
1¼-11½
5
3.18"
(8.08)
4.30"
(10.92)
.730"
(1.85)
1.260"
(3.20)
1½-11½
5
3.18"
(8.08)
4.30"
(10.92)
.750"
(1.92)
2-11½
6
3.51"
(8.92)
5.50"
(13.97)
.800"
(2.03)
Ref.
E
G
C
D
Throat
Dia.
A/C*
A/F*
Dia.
—
—
—
—
—
—
1.41"
(3.58)
2.50"
(6.35)
.550"
(1.40)
.575"
(1.46)
1.23"
(3.12)
1.12"
(2.82)
1.315"
(3.34)
1.375"
(3.49)
1.65"
(4.19)
2.81"
(7.14)
.560"
(1.42)
.765"
(1.94)
1.42"
(3.61)
1.29"
(3.28)
1.560"
(3.96)
1.50"
(3.81)
1.750"
(4.44)
1.99"
(5.05)
3.30"
(8.38)
.700"
(1.78)
1.010"
(2.57)
1.82"
(4.62)
1.60"
(4.06)
1.875"
(4.76)
2.47"
(6.27)
2.15"
(5.46)
2.310"
(5.87)
—
—
—
—
—
—
—
1.500"
(3.81)
2.47"
(6.27)
2.15"
(5.46)
2.310"
(5.87)
—
—
—
—
—
—
—
1.920"
(4.88)
2.98"
(7.57)
2.78"
(7.06)
3.000"
(7.62)
—
—
—
—
—
—
—
Ref.
E
G
Note: *A/C - Across Corners; A/F - Across Flats.
B Ref.
G
A
E
C
F
D
Dimensions shown are approximate and
are subject to change without notice.
V-72
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Strain Relief Grips
Deluxe Cord Grips Fitting Dimensions
Female Hubbell Connectors
Aluminum, Inches (cm)
F
NPT
Inches
A
B
Form
Dia.
Ref.
³⁄₈-18
1
.88"
(2.24)
½-14
2
¾-14
A
(Overall)
E
C
D
Throat
Dia.
Across
Comers
Across
Flats
1.40"
(3.56)
.560"
(1.42)
.44"
(1.12)
.94"
(2.39)
.81"
(2.06)
1.13"
(2.87)
1.80"
(4.57)
.560"
(1.42)
.63"
(1.60)
1.15"
(2.92)
1.00"
(2.54)
2
1.13"
(2.87)
2.10"
(5.33)
.750"
(1.90)
.63"
(1.60)
1.44"
(3.66)
1.25"
(3.17)
1-11½
4
1.75"
(4.44)
2.30"
(5.84)
.880"
(2.24)
1.10"
(2.79)
1.88"
(4.78)
1.63"
(4.14)
1¼-11½
5
2.31"
(5.87)
2.80"
(7.11)
.950"
(2.41)
1.43"
(3.63)
2.64"
(6.71)
2.29"
(5.82)
1½-11½
5
2.31"
(5.87)
2.80"
(7.11)
.950"
(2.41)
1.43"
(3.63)
2.64"
(6.71)
2.29"
(5.82)
B Ref.
E
D
F
C (N.P.T. Thread Depth)
Product Data
Dust-Tight Strain Relief Grips for Insulated Cables
Kellems® Strain Relief Grips connect flexible cord or bus drop cable to electrical enclosures. For indoor use only, they are
available with either insulated or non-insulated aluminum fittings, and feature single weave, galvanized steel mesh grips with
patented wide range mesh construction. They come with a locknut and a neoprene gasket that provides a dust tight seal.
Application
Used to connect electrical cable to power boxes, cabinets, panel boards, power centers, machine tools and with bus
drop systems.
Benefits
• Helps prevent cord or cable pull-out.
• Provides a dust tight seal.
• Easy installation.
• Patented mesh construction.
• One piece design.
I-Grips for Insulated Cables
Kellems I-Grips are made of high strength, plastic coated galvanized steel strand. They are offered in six sizes to fit all cable
diameters used with Hubbell Insulgrip® Kellems l-Grips will control cable arc-of-bend and reduce high pull tensions from
being transmitted to the wiring terminals.
Application
Kellems I-Grips will fit 2, 3, 4 and 5 wire Hubbell Insulgrip plugs and connector bodies. The eye tabs fit under the nylon cord
clamp and the screws slide through the eyelets, securing the grip in place.
I-Grips can be used on any Insulgrip cord set which requires cable, arc-of-bend control or heavy duty strain relief. Cord sets
used at in-door construction sites or for plant maintenance jobs are examples.
These grips are for indoor use only.
Benefits
• Easily attached to Insulgrip plugs and
connector bodies.
• Fits all sizes.
• Provides heavy duty strain relief.
• Controls cable arc-of-bend.
Note: I-Grips should not be used on Insulgrip devices when “Seal-Tite®” weatherproof covers are to be installed.
Dimensions shown are approximate and
are subject to change without notice.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-73
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Strain Relief for Liquidtight Conduit
Strain Relief Grips for Liquidtight Flexible Metal and PolyTuff® I Non-Metallic Conduit
Kellems Liquidtight, Flexible Metal Conduit Grips are offered with high quality Hubbell plated steel fittings in a wide variety of
NPT sizes and configurations, either insulated or non-insulated. The addition of a stainless steel mesh to these fittings makes
them stronger than the conduit itself. Kellems Conduit Grips helps prevent conduit pull-out from the connecting fitting that
is subject to stress, pull tension, vibration, motion or strain. They promote safe electrical systems and reduce equipment
downtime.
Application
Kellems Conduit Grips are used in the wiring of machine tools, motors, molding equipment, transformers, weaving and
paper machines, fans, lighting, bakeries, breweries, food processing, chemical plants, dairies, mines and any application that
requires Liquidtight Conduit.
Benefits
• Helps prevent conduit pull-out and damage at the fitting.
• Reduces equipment downtime.
• Liquidtight fittings.
• Easily installed.
• Stainless steel grip resists corrosion.
Kellems Conduit Grips are suitable for use in hazardous locations per Class I Div. 2, Class II Div. 1 & 2, Class III Div. 1 & 2 of
the National Electric Code.
Connectors with insulated throats protect
insulation on wires during wire pulling.
Yellow color easily seen by inspectors.
2½" - 4" sizes include insulating bushing
instead of fixed insulator
Nylon gland ring is split for ease of installation
and greater compression. Reversible design
cannot be installed facing the wrong way. Nylon
is impervious to liquids, resistant to temperature
extremes and resists abrasion
Hardened Steel Locknut
has tangs that dig into box
for excellent continuity of
ground; locknut will not slip
or spin
Steel grounding ferrule easily
threaded by hand. Fits convolutions
to conduit. Eliminates pullouts and
insures continuity of ground;
distortion free to remain reusable
Optional Sealing Washer gives
better liquidtight protection
around knockout of sheet metal
box. Neoprene gasket seals out
liquids and steel retaining ring
protects gasket from distortion;
order separately
Body is virtually unbreakable.
Straight connectors through 1" are
screw machine steel; other sizes
malleable iron. Threads at left are
tapered to insure liquidtight seal in
threaded hub. Liquidtight conduit
cutaway view shows flexible steel
core under plastic jacket
V-74
®
Wiring Device-Kellems
Hexagonal compression nut is
screw machined steel through
1" and malleable iron on
larger sizes
Wire mesh grip
prevents pullout
Liquidtight conduit cutaway
view shows flexible steel core
under plastic jacket
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Strain Relief for Liquidtight Conduit
Liquidtight Conduit Grip Fitting Dimensions, Inches
Straight with Male Fitting
Straight with Male Fitting with Insulated Throat
Dimensions, Inches
Trade A
Size
Inches Ref.
Dimensions, Inches
B
C
Ref.
A/C*
A/F*
D
Throat
Dia. A/C*
E
A/F*
Catalog
Number
Trade A
Size
Inches Ref.
.93"
074093401
³⁄₈
B
C
D
E
Throat
Dia. A/C*
A/F*
Catalog
Number
Ref.
A/C*
A/F*
1.50"
.66"
1.20"
1.06"
.57"
1.07"
.93"
074093511
³⁄₈
1.43"
.59"
1.20"
1.06"
.61"
1.07"
½
1.43"
.59"
1.34"
1.19"
.61"
1.22"
1.06"
074093402
½
1.50"
.66"
1.34"
1.19"
.57"
1.22"
1.06"
074093512
¾
1.56"
.59"
1.55"
1.37"
.84"
1.43"
1.25"
074093403
¾
1.62"
.66"
1.55"
1.38"
.78"
1.43"
1.25"
074093513
1
1.68"
.66"
1.95"
1.69"
1.06" 1.73"
1.56"
074093404
1
1.75"
.72"
1.95"
1.69"
.98"
1.73"
1.56"
074093514
1¼
2.03"
.63"
2.39"
2.06"
1.37" 2.36" 2.08"
074093405
1¼
2.09"
.69"
2.39"
2.06" 1.29"
2.36" 2.08"
074093515
1½
2.21"
.63"
2.72"
2.38"
1.53" 2.79"
2.48"
074093406
1½
2.28"
.69"
2.72"
2.37"
1.53"
2.79"
2.48"
074093516
2
2.28"
.69"
3.08" 2.87"
2.06" 3.32" 2.90"
074093408
2
2.34"
.75"
3.08" 2.87"
1.95"
3.32" 2.90"
074093518
2½
3.56" 1.06"
3.92" 3.62" 2.42"
3.85"
3.60"
074093520
3
3.81"
1.06"
4.70"
4.31"
3.01"
4.65"
4.33"
074093522
4
3.81"
1.06"
5.75"
5.31"
3.96" 5.75"
5.39"
074093526
45° Angle with Male Fitting
45° Angle with Male Fitting with Insulated Throat
Dimensions, Inches
Trade H
Size
Inches
J
Dimensions, Inches
K
L
Ref.
A/C*
A/F*
M
N
Throat
Dia. A/C* A/F*
Catalog
Number
Trade H
Size
Inches
J
K
M
N
Throat
Dia. A/C* A/F*
L
Ref.
A/C*
A/F*
Catalog
Number
³⁄₈
1.19" 1.28" .59"
1.20" 1.06"
.60"
1.16" 1.02"
074093441
³⁄₈
1.25" 1.28" .66"
1.20" 1.06" .57"
1.16" 1.02"
074093561
½
1.19" 1.28" .59"
1.34" 1.19"
.61"
1.21" 1.06"
074093442
½
1.25" 1.28" .66"
1.34" 1.19" .57"
1.21" 1.06"
074093562
¾
1.19" 1.43" .59"
1.55" 1.45"
.84"
1.50" 1.32"
074093443
¾
1.25" 1.44" .66"
1.55" 1.45" .78"
1.50" 1.32"
074093563
1
1.38" 1.53" .66"
1.95" 1.69"
1.05" 1.82" 1.59"
074093444
1
1.44" 1.53" .72"
1.95" 1.69" .98"
1.82" 1.59"
074093564
1¼
1.42" 1.69" .63"
2.39" 2.06"
1.37" 2.32" 2.03"
074093445
1¼
1.48" 1.69" .69"
2.39" 2.06" 1.29"
2.32" 2.03"
074093565
1½
1.66" 2.00" .66"
2.72" 2.38"
1.60" 2.62" 2.29"
074093446
1½
1.72" 2.00" .72"
2.72" 2.38" 1.53"
2.62" 2.29"
074093566
2
1.69" 2.25" .66"
3.08" 2.88"
2.05" 3.21" 2.80"
074093448
2
1.75" 2.25" .72"
3.08" 2.87" 1.95"
3.21" 2.80"
074093568
90° Angle with Male Fitting
90° Angle with Male Fitting with Insulated Throat
Dimensions, Inches
Trade D
Size
Inches
Dimensions, Inches
E
F
A/C*
G
A/F*
Ref.
O
P
Throat
Dia.
A/C* A/F*
Catalog
Number
Trade D
Size
Inches
E
A/C*
F
G
A/F*
Ref.
O
P
Throat
Dia.
A/C* A/F*
Catalog
Number
³⁄₈
1.31" .59"
1.20" 1.06"
1.44" .60"
1.13" .99"
074093421
³⁄₈
1.38" .66"
1.20" 1.06" 1.44" .60"
1.13" .99"
074093541
½
1.31" .59"
1.34" 1.12"
1.44" .61"
1.21" 1.00"
074093422
½
1.38" .66"
1.34" 1.12" 1.44" .57"
1.21" 1.00"
074093542
¾
1.44" .59"
1.55" 1.45"
1.63" .83"
1.48" 1.29"
074093423
¾
1.50" .66"
1.55" 1.45" 1.63" .78"
1.48" 1.29"
074093543
1
1.78" .66"
1.95" 1.60"
2.19" 1.05" 1.80" 1.57"
074093424
1
1.84" .66"
1.95" 1.60" 2.19" .98"
1.80" 1.57"
074093544
1¼
1.97" .63"
2.39" 2.06" 2.50" 1.37" 2.32" 2.02"
074093425
1¼
2.03" .69"
2.39" 2.06" 2.50" 1.29" 2.32" 2.02"
074093545
1½
2.19" .66"
2.72" 2.38" 2.69" 1.61" 2.58" 2.25"
074093426
1½
2.25" .69"
2.72" 2.38" 2.69" 1.53" 2.58" 2.20" 074093546
2
2.53" .66"
3.08" 2.87"
074093428
2
2.59" .72"
3.08" 2.87" 3.25" 1.95" 3.14" 2.75"
2½
3.44" 1.00" 3.92" 3.63" 4.25" 2.42" 3.78" 3.50" 074093550
3
3.75" 1.00" 4.70" 4.31" 4.87" 3.01" 4.64" 4.30" 074093552
3.25" 2.05" 3.14" 2.75"
E
A/C A/F
J
D
Throat
Dia.
C
074093548
P
A/C A/F
F
H
L
D
A
Ref.
B
Ref.
N
A/C A/F
K
M
Throat
Dia.
E
G
O
Throat
Dia.
Dimensions shown are approximate and
are subject to change without notice.
Note: *A/C - Across Corners; A/F - Across Flats.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-75
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Strain Relief for Liquidtight Conduit
Strain Relief for UL Type A, Flexible, Liquidtight Conduit
Kellems Grips for UL Type A, non-metallic, flexible, liquidtight conduit are available in straight and 90° male and feature a
high quality Hubbell plated steel or malleable iron fitting, complete with a sealing O-ring, lock nut and stainless steel mesh.
These grips increase the retention of the conduit in the fitting, control its arc-of-bend and provide a liquidtight seal.
Application
These grips are used on UL Type A non-metallic
conduit connections at limit switches, motor boxes,
panel boards, control stations and on all types of
machinery and machine tools.
Benefits
• Provides a liquidtight seal.
• Helps prevent conduit pull-out.
• Reduces conduit cutting, kinking, fraying and splitting at the fitting.
• Easily installed.
Steel Locknut has tangs that dig
into box for excellent continuity of
ground; locknut will not slip or spin
Body is virtually unbreakable. Straight connectors through 1" are screw
machine steel; other sizes are malleable iron. Threads are tapered to
insure liquidtight seal when used in threaded hub; octagonal shape inside
holds the ferrule to prevent conduit from twisting during installation
Neoprene O-ring is factory
assembled into the body
to seal out liquids
Insulated throat protects
insulation on wires during
pulling; yellow color easily
seen by inspectors
Wire mesh grip
prevents pullout
Yellow nylon ferrule fits inside nonmetallic conduit to hold the shape; barb
in designed to assure liquidtight seal even
with non-square cut; ferrule is keyed to fit
into body to prevent conduit twisting
Hexagonal compression nut is machine steel
through 1" malleable iron on larger sizes;
tapered interior compresses sleeve over conduit
sealing out liquids and preventing pullout
Yellow nylon sleeve installs over conduit; six slits in sleeve permit
tight compression onto conduit as compression nut is tightened
Dimensional Charts For UL Type A, Liquidtight Conduit Grip Fittings
Straight with Male Fitting with Insulated Throat
Dimensions Inches (cm)
Trade Size
NPT Inches A
C
Flats
B
Ref.
D
A
Ref.
B
C
D
Catalog Number
³⁄₈
1.922" (4.88)
.594" (1.51)
1.156" (2.94)
3.75" (9.52)
½
1.922" (4.88)
.594" (1.51)
1.250" (3.17)
4.50" (11.43)
¾
2.016" (5.12)
.594" (1.51)
1.500" (3.81)
6.25" (15.87)
1
2.157" (5.48)
.719" (1.83)
1.844" (4.68)
7.50" (19.05)
H038CNK
H050CNK
H075CNK
H100CNK
1¼
2.219" (5.64)
.750" (1.91)
2.312" (5.87)
9.00" (22.86)
1½
2.344" (5.95)
.750" (1.91)
2.578" (6.55)
13.50" (34.29)
2
2.406" (6.11)
.750" (1.91)
3.187" (8.09)
14.50" (36.83)
H125CNK
H150CNK
H200CNK
90° Angle with Male Fitting with Insulated Throat
Dimensions Inches (cm)
Trade Size
NPT Inches E
G
Flats
E
I
F
H
V-76
F
G
H
I
Catalog Number
³⁄₈
1.250" (3.18)
.594" (1.51)
1.156" (2.94)
1.453" (3.69)
3.75" (9.52)
½
1.281" (3.25)
.594" (1.51)
1.250" (3.17)
1.453" (3.69)
4.50" (11.43)
¾
1.438" (3.65)
.594" (1.51)
1.500" (3.81)
1.000" (2.54)
6.25" (15.87)
1
1.750" (4.44)
.719" (1.83)
1.844" (4.68)
2.125" (5.40)
7.50" (19.05)
1¼
1.969" (5.00)
.750" (1.91)
2.312" (5.87)
2.344" (5.95)
9.00" (22.86)
1½
2.250" (5.71)
.750" (1.91)
2.578" (6.55)
2.500" (6.35)
13.50" (34.29)
H0389CNK
H0509CNK
H0759CNK
H1009CNK
H1259CNK
H1509CNK
2
2.531" (6.43)
.750" (1.91)
3.187" (8.09)
2.781" (7.06)
14.50" (36.83)
H2009CNK
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Cord Connectors
Features and Benefits
Machined threads provide a strong positive seal;
the tapered interior dome easily drives the
bushing into the connector body
The patented GOTHCA® ring incorporates a
split hinge design to prevent friction and
provide strain relief, also color-coded
for sizing identification
Lubricated neoprene bushing compresses
easily for a liquidtight seal and added
pull-out protection
The connector body is a one-piece design
with machined threads; a tapered interior
seats the bushing evenly for a liquidtight seal
Hubbell has the broadest line and the widest choice of
materials in the industry. NPT hub sizes from ¼" to 3" in
straight male end, 90°, 45°, female and underground feed
connectors. They are available in your choice of aluminum,
plated steel, nylon and stainless steel.
Their machined steel nut and body allows for tightening
the compression nut and NPT hub without worrying about
stripping the threads. For larger size cord, NPT hub sizes
1" to 2", Hubbell utilizes malleable iron connectors which
provide excellent holding and liquidtight performance.
Hubbell offers a full line of machined aluminum cord
connectors in NPT hub sizes ¼" through 1" and cast
aluminum 1" to 3". They provide durable performance and a
clean attractive look without adding unwanted weight. NPT
hub sizes ¼" to 1" feature an attractive knurled finish which
makes them easy to handle and maintain a U.L. listing by
hand tightening.
Hubbell’s nylon cord connectors resist most common
industrial corrosives and provide highly effective pullout
protection in a lightweight design. They are ideal for any
application where weight, conductivity or corrosion may
be an issue. They’re available in NPT hub sizes from
¼" to 1".
The zinc-plated steel cord connectors offers the strength
of steel and the corrosion resistance of zinc-plating. These
heavy-duty connectors hold up to most manufacturing
chemicals including acid solutions, solvents and other
corrosive materials.
www.hubbell-wiring.com
Stainless steel cord connectors provide superior strength
and corrosion resistance for industrial and military
applications. They are machined from 300 series stainless
steel and come in ¼" to 1", NPT hub sizes.
®
Wiring Device-Kellems
V-77
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Straight Male Cord Connectors
UL Listed to
Type 4, 4X, 12 and 13
Form Size 1-3
IP66*
SUITABILITY
Straight Male
NPT
Hub
Size
Machined
Aluminum
Machined
Zinc-Plated Steel
¼
³⁄₈
½
Stainless
Steel
½
Gray Nylon
½
Black Nylon
Cord Dia.
Inches
(mm)
Form Color
Size Code
Machined
Aluminum
Machined
Zinc-Plated
Steel
Stainless
Steel
Nylon
Gray
Nylon
Black
.06"-.13"
(1.6-3.2)
Green
—
—
—
SHC1001CR
—
.13"-.19"
(3.2-4.7)
Orange
SHC1002
—
—
SHC1002CR
—
.19"-.25"
(4.7-6.3)
Red
SHC1003
—
SHC1003SS
SHC1003CR
—
Black
SHC1004
—
SHC1004SS
SHC1004CR
—
.31"-.38"
(7.9-9.5)
White
SHC1005**
—
—
SHC1005CR
.38"-.44"
(9.5-11)
Blue
—
—
—
SHC1006CR
.06"-.13"
(1.6-3.2)
Green
SHC1007
—
—
.13"-.19"
(3.2-4.7)
Orange
SHC1008
.19"-.25"
(4.7-6.3)
Red
SHC1009
Black
SHC1010
.31"-.38"
(7.9-9.5)
White
SHC1011
.38"-.44"
(9.5-11.0)
Blue
SHC1012
.19"-.25"
(4.7-6.3)
Red
SHC1015
—
—
—
—
Black
SHC1016
—
—
—
—
White
SHC1017
—
—
—
—
.38"-.44"
(9.5-11.0)
Blue
SHC1018
—
—
—
—
.06"-.13"
(1.6-3.2)
Green
SHC1019
—
—
.13"-.19"
(3.2-.4.7)
Orange
SHC1020
SHC1020ZP
.19"-.25"
(4.7-6.3)
Red
SHC1021
White
.38"-.50"
(9.7-12.7)
.25"-.31"
(6.3-7.9)
.25"-.31"
(6.3-7.9)
.25"-.31"
(6.3-7.9)
.31"-.38"
(7.9-9.5)
F1
F1
F1
SHC1008ZP
—
SHC1010ZP
—
SHC1012ZP
—
—
SHC1008CR
SHC1009SS
SHC1009CR
—
SHC2005CR
—
—
SHC2008CR
—
SHC1010CR
SHC2010CR
SHC1011SS
SHC1011CR
SHC2011CR
SHC1012SS
SHC1012CR
SHC2012CR
SHC1019CR
—
SHC1020SS
SHC1020CR
—
SHC1021ZP
SHC1021SS
SHC1021CR
SHC2021CR
SHC1022
SHC1022ZP
SHC1022SS
SHC1022CR
SHC2022CR
Blue
SHC1023
SHC1023ZP
SHC1023SS
SHC1023CR
SHC2023CR
.50"-.63"
(12.7-15.9)
Brown
SHC1024
SHC1024ZP
SHC1024SS
SHC1024CR** SHC2024CR**
.38"-.50"
(9.7-12.7)
Blue
SHC1025
—
—
—
—
Brown
SHC1026
—
—
—
—
Yellow
SHC1027**
SHC1027ZP**
—
—
—
Orchid
SHC1028**
SHC1028ZP**
—
—
—
.25"-.38"
(6.3-.9.7)
.50"-.63"
(12.7-15.9)
.63"-.75"
(15.9-19.0)
.75"-.88"
(19.0-22.2)
F2
F3
Note: See pages V-87 to V-95 for technical information and dimensional drawings.
*IP66 Suitability when used with optional metal clad O-ring, see page V-84 for additional information.
**Cable jacket may have to be stripped to pass through connector body.
Locknuts sold separately. See page V-84 for additional information.
V-78
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Straight Male Cord Connectors
UL Listed to
Type 4, 4X, 12 and 13
Form Size 2-4
IP66*
SUITABILITY
Straight Male
NPT
Hub
Size
¾
¾
1
1
Cord Dia.
Inches
(mm)
Form Color
Size Code
Machined
Aluminum
.06"-.13"
(1.6-3.2)
Green
SHC1029
.13"-.19"
(3.2-4.7)
Orange
SHC1030
.19"-.25"
(4.7-6.3)
Red
Machined
Zinc-Plated
Steel
Nylon
Gray
Nylon
Black
—
—
—
SHC1030ZP
—
—
—
SHC1031
SHC1031ZP
—
—
—
White
SHC1032
SHC1032ZP
—
—
—
.38"-.50"
(9.7-12.7)
Blue
SHC1033
SHC1033ZP
—
—
—
.50"-.63"
(12.7-15.9)
Brown
SHC1034
SHC1034ZP
—
—
—
.38"-.50"
(9.5-12.7)
Blue
—
SHC1035ZP
.50"-.63"
(12.7-15.9)
Brown
SHC1036
Yellow
SHC1037
SHC1037ZP
.75"-.88"
(19.0-22.2)
Orchid
SHC1038**
SHC1038ZP** SHC1038SS** SHC1038CR** SHC2038CR**
.50"-.63"
(12.7-15.9)
Brown
—
SHC1097ZP
—
—
—
Yellow
—
SHC1098ZP
—
—
—
.75"-.88"
(19.0-22.2)
Orchid
—
SHC1099ZP
—
—
—
.38"-.50"
(9.7-12.7)
Blue
SHC1039
—
—
SHC1039CR
.50"-.63"
(12.7-15.9)
Brown
SHC1040
—
—
SHC1040CR
SHC2040CR
.63"-.75"
(15.9-19.0)
Yellow
SHC1041
—
SHC1041SS
SHC1041CR
SHC2041CR
Orchid
SHC1042
—
SHC1042SS
SHC1042CR
SHC2042CR
.88"-1.00"
(22.2-25.4)
Gray
SHC1043
SHC1043SS
SHC1043CR
SHC2043CR
1.00"-1.13"
(25.4-28.6)
Pink
SHC1044**
.25"-.38"
(6.3-9.7)
.63"-.75"
(15.9-19.0)
.63"-.75"
(15.9-19.0)
.75"-.88"
(19.0-22.2)
F2
F3
F3
F4
—
Stainless
Steel
—
SHC1043ZP
—
SHC1035SS
SHC1035CR
SHC2035CR
SHC1036SS
SHC1036CR
SHC2036CR
SHC1037SS
SHC1037CR
SHC2037CR
Machined
Aluminum
Machined
Zinc-Plated Steel
—
Stainless
Steel
SHC1044SS** SHC1044CR** SHC2044CR**
Note: See pages V-87 to V-95 for technical information and dimensional drawings.
*IP66 Suitability when used with optional metal clad O-ring, see page V-84 for additional information.
**Cable jacket may have to be stripped to pass through connector body.
Form 4 aluminum and plated steel nuts are machined, bodies are cast aluminum.
Locknuts sold separately. See page V-84 for additional information.
Gray Nylon
Black Nylon
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-79
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Straight Male Cord Connectors
UL Listed to
Type 4, 4X, 12 and 13
Form Size 5-8
IP66*
SUITABILITY
Straight Male
NPT
Hub
Size
1
Cast Aluminum
1¼
1½
Cast Aluminum
Malleable Iron
1½
2
2
2½
3
3
Cord Diameter
Inches
(mm)
Form
Size
.88"-1.00"
(22.2-25.4)
1.00"-1.13"
(25.4-28.6)
1.13"-1.25"
(28.6-31.7)
1.25"-1.38"
(31.7-34.9)
.75"-.88"
(19.0-22.2)
.88"-1.00"
(22.2-25.4)
1.00"-1.13"
(25.4-28.6)
1.13"-1.25"
(28.6-31.7)
1.25"-1.38"
(31.7-34.9)
.75"-.88"
(19.0-22.2)
.88"-1.00"
(22.2-25.4)
1.00"-1.13"
(25.4-28.6)
1.13"-1.25"
(28.6-31.7)
1.25"-1.38"
(31.7-34.9)
1.38"-1.50"
(34.9-38.1)
1.50"-1.63"
(38.1-41.3)
1.63"-1.75"
(41.3-44.4)
1.75"-1.88"
(44.4-47.6)
1.25"-1.38"
(31.7-34.9)
1.38"-1.50"
(34.9-38.1)
1.50"-1.63"
(38.1-41.3)
1.63"-1.75"
(41.3-44.4)
1.75"-1.88"
(44.4-47.6)
1.69"-1.81"
(42.9-46.0)
1.81"-1.94"
(46.0-49.2)
1.94"-2.06"
(49.2-52.4)
2.06"-2.19"
(52.4-55.6)
2.19"-2.31"
(55.6-58.7)
1.69"-1.81"
(42.9-46.0)
1.81"-1.94"
(46.0-49.2)
1.94"-2.06"
(49.2-52.4)
2.06"-2.19"
(52.4-55.6)
2.19"-2.31"
(55.6-58.7)
2.31"-2.44"
(58.7-61.9)
1.69"-1.81"
(42.9-46.0)
1.94"-2.06"
(49.2-52.4)
2.06"-2.19"
(52.4-55.6)
2.19"-2.31"
(55.6-58.7)
2.31"-2.44"
(58.7-61.9)
2.44"-2.63"
(61.9-66.7)
2.63"-2.81"
(66.7-71.4)
2.81"-3.00"
(71.4-76.2)
3.00"-3.25"
(76.2-82.5)
Cast Aluminum
Malleable Iron
F5
SHC1046
SHC1047**
SHC1048**
SHC1049**
—
—
—
—
F5
SHC1050
SHC1051
SHC1052
SHC1053
SHC1054**
—
—
SHC1052ZP
SHC1053ZP
SHC1054ZP
F5
SHC1055
SHC1056
SHC1057
SHC1058
SHC1059
—
—
SHC1057ZP
SHC1058ZP
SHC1059ZP
F6
SHC1061
SHC1062**
SHC1063**
SHC1064**
—
—
—
—
F6
SHC1065
SHC1066
SHC1067
SHC1068
SHC1069
—
—
—
—
—
F7
SHC1070
SHC1071
SHC1072**
SHC1073**
SHC1074**
—
—
—
—
—
F7
SHC1076
SHC1077
SHC1078
SHC1079
SHC1080
SHC1081**
—
—
—
—
—
—
F7
SHC1086
SHC1088
SHC1089
SHC1090
SHC1091
—
—
—
—
—
F8
SHC1092
SHC1093
SHC1094
SHC1095**
—
—
—
—
Note: See pages V-87 to V-95 for technical information and dimensional drawings.
*IP66 Suitability when used with optional metal clad O-ring, see page V-84 for additional information.
**Cable jacket may have to be stripped to pass through connector body.
Form 4 aluminum and plated steel nuts are machined, bodies are cast aluminum.
F5 and larger will not be color coded.
Locknuts sold separately. See page V-84 for additional information.
V-80
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
45° and 90° Male Cord Connectors
UL Listed to
Type 4, 4X, 12 and 13
Form Size 1-6
IP66*
SUITABILITY
45° Male
NPT
Hub
Size
Cord Diameter
Inches
(mm)
Form Color
Size Code
Machined
Aluminum†
Machined
Zinc-Plated
Steel∆
—
VHC1022ZP
VHC1023ZP
VHC1024ZP**
Cast
Aluminum
½
.19"-.25"
.25"-.38"
.38"-.50"
.50"-.63"
(4.7-6.3)
(6.3-9.7)
(9.7-12.7)
(12.7-15.9)
F2
Red
White
Blue
Brown
VHC1021
VHC1022
VHC1023
VHC1024**
—
—
—
—
¾
.38"-.50"
.50"-.63"
.63"-.75"
(9.7-12.7)
(12.7-15.9)
(15.9-19.0)
F3
Blue
Brown
Yellow
VHC1035
VHC1036
VHC1037**
—
—
—
—
—
—
1
.63"-.75"
.75"-.88"
(15.9-19.0)
(19.0-22.2)
F4
Yellow
Orchid
VHC1041
VHC1042
—
—
—
—
1¼
1.00"-1.13"
1.13"-1.25"
(25.4-28.6)
(28.6-31.7)
F5
—
—
—
—
VHC1052
VHC1053**
90° Male
NPT
Hub
Size
Cord Diameter
Inches
(mm)
Form Color
Size Code
Machined
Aluminum†
Machined
Zinc-Plated
Steel∆
—
—
—
Nylon
Gray
Black
White
Blue
NHC1010
NHC1011
NHC1012
(1.6-3.2)
(3.2-4.7)
(4.7-6.3)
(6.3-9.7)
(9.7-12.7)
(12.7-15.9)
F2
Green
Orange
Red
White
Blue
Brown
—
NHC1020
NHC1021
NHC1022
NHC1023
NHC1024**
—
—
NHC1021ZP
NHC1022ZP
NHC1023ZP
NHC1024ZP**
—
NHC1020CR
NHC1021CR
NHC1022CR
NHC1023CR
NHC1024CR**
.38"-.50"
.50"-.63"
.63"-.75"
.75"-.88"
(9.7-12.7)
(12.7-15.9)
(15.9-19.0)
(19.0-22.2)
F3
Blue
Brown
Yellow
Orchid
NHC1035
NHC1036
NHC1037
NHC1038
NHC1035ZP
NHC1036ZP
NHC1037ZP
NHC1038ZP
NHC1035CR
NHC1036CR
NHC1037CR
NHC1038CR
1
.50"-.63"
.63"-.75"
.75"-.88"
.88"-1.00"
1.00"-1.13"
(12.7-15.9)
(15.9-19.0)
(19.0-22.2)
(22.2-25.4)
(25.4-28.7)
F4
Brown
Yellow
Orchid
Gray
Pink
NHC1040
NHC1041
NHC1042
NHC1043**
NHC1044**
—
NHC1041ZP
—
—
—
—
NHC1041CR
NHC1042CR
NHC1043CR
—
1¼
.88"-1.00"
1.00"-1.13"
1.13"-1.25"
1.25"-1.38"
(22.2-25.4)
(25.4-28.6)
(28.6-31.7)
(31.7-34.9)
F5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
NHC1051
NHC1052
NHC1053**
NHC1054**
1½
1.00"-1.13"
1.13"-1.25"
1.25"-1.38"
(25.4-28.6)
(28.6-31.7)
(31.7-34.9)
F5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
NHC1057
—
NHC1059
2
1.38"-1.50"
(34.9-38.1)
F6
—
—
—
—
—
NHC1066
.25"-.31"
.31"-.38"
.38"-.44"
(6.3-7.9)
(7.9-9.5)
(9.5-11.0)
½
.06"-.13"
.13"-.19"
.19"-.25"
.25"-.38"
.38"-.50"
.50"-.63"
¾
—
—
—
Cast
Aluminum
F1
³⁄₈
—
—
—
Nylon
Black
—
—
—
NHC2022CR
NHC2023CR
NHC2024CR**
—
—
—
—
—
NHC2041CR
NHC2042CR**
NHC2043CR**
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Note: See pages V-87 to V-95 for technical information and dimensional drawings.
*IP66 Suitability when used with optional metal clad O-ring, see page V-84 for additional information.
**Cable jacket may have to be stripped to pass through connector body.
†Nuts are machined aluminum and bodies are cast aluminum.
∆Compression nuts are machined zinc-plated steel and bodies are zinc-plated malleable iron.
Locknuts sold separately. See page V-84 for additional information.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-81
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Straight Female, Underground Feeder and Metric Connectors
Form Size 1-4
Straight Female
NPT
Hub
Size
Machined
Aluminum
Cord Diameter
Inches
(mm)
Form
Size
Color
Code
Machined
Aluminum
½
.25"-.38"
.38"-.50"
(6.3-9.7)
(9.7-12.7)
F2
White
Blue
FHC1022
FHC1023
¾
.38"-.50"
.50"-.63"
(9.7-12.7)
(12.7-15.9)
F2
Blue
Brown
FHC1033
FHC1034
1
.75"-.88"
.88"-1.00"
(19.0-22.2)
(22.2-25.4)
F4
Orchid
Gray
FHC1042†
FHC1043†
Note: See pages V-87 to V-95 for technical information and dimensional drawings.
*Cable jacket may have to be stripped to pass through connector body.
†Nuts are machined aluminum and bodies are cast aluminum.
IP66*
SUITABILITY
Underground Feeder Connectors
Machined
Aluminum
Machined
Zinc-Plated Steel
NPT
Hub
Size
UF**
Machined
Aluminum
Machined
Zinc-Plated
Steel
Nylon
Gray
Nylon
Black
2 # 14,
2 # 12,
2 # 10.
UFC0001
UFC0001ZP
UFC0001CR
UFC2001CR
.2"x.4" min
(5.1x10.2)
.25"-.55" max (6.3x14.0)
2 # 14,
2 # 12,
2 # 10.
UFC0002
—
.2"x.6" min
(5.1x15.2)
.26"x.78" max (6.6x19.8)
3 # 14,
3 # 12,
3 # 10.
UFC0003
—
Cord Diameter
Inches
(mm)
Wire
Size
½
.2"x.4" min
(5.1 x 10.2)
.25"-.55" max (6.3 x 14.0)
¾
¾
Machined
Aluminum
V-82
—
UFC0003CR
UFC2003CR
Note: See pages V-87 to V-95 for technical information and dimensional drawings.
*IP66 Suitability when used with optional metal clad O-ring, see page V-84 for additional information.
**Wire sizes vary among manufacturers.
Locknuts sold separately, see page V-84 for additional information.
UL Listed to Type 4,
4X, 12 and Type 13 †
Metric Aluminum Cord Connectors
Gray Nylon
—
NPT
Hub
Size
Cord Diameter
Inches
(mm)
M16
.31"-.38"
M20
Form
Size
Catalog Number
(7.9-9.7)
F1
SHCM161011
.31"-.38"
(7.9-9.7)
F1
SHCM201017
M20
.25"-.38"
.38"-.50"
.50"-.62"
(6.3-9.7)
(9.7-12.7)
(12.7-15.8)
F2
SHCM201022
SHCM201023
SHCM201024
M25
.38"-.50"
.50"-.62"
(9.7-12.7)
(12.7-15.8)
F2
SHCM251033
SHCM251034
M30
.63"-75"
(15.9-19.0)
F3
SHCM301037
Note: †When used with metal clad O-ring, see page V-84 for additional information.
Non-metallic Locknuts sold separately, see page V-84 for additional information.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Low Profile NPT, PG and Metric Thread Connectors
Non-Metallic Cord Connectors
IP66*
SUITABILITY
Low Profile NPT Cord Connectors
NPT
Hub Size
Cord Diameter
Inches
(mm)
Color
Catalog Number
Non-metallic Locknuts
³⁄₈
.18"-.31"
(4.6-7.9)
Gray
SEC38GA*
31622002LPK50
³⁄₈
.18"-.31"
(4.6-7.9)
Black
SEC38BA*
31622002LPK50
½
.17"-.45"
(4.3-11.4)
Gray
SEC50GA
31622003LPK50
½
.17"-.45"
(4.3-11.4)
Black
SEC50BA
31622003LPK50
¾
.45"-.71"
(11.4-18.0)
Gray
SEC75GA
31622007LPK50
¾
.45"-.71"
(11.4-18.0)
Black
SEC75BA
31622007LPK50
1
.59"-1.00"
(15-25.4)
Gray
SEC100GA
31622008LPK50
1
.59"-1.00"
(15-25.4)
Black
SEC100BA
31622008LPK50
SEC100BA
Note: See pages V-87 to V-95 for technical information and dimensional drawings.
Catalog numbers with “PK50” suffix are bulk packed 50 pieces.
Low Profile PG∆ Cord Connectors
Hub Size
Cord Diameter
Inches
(mm)
Color
Catalog Number
Non-metallic Locknuts
PG7
.11"-.25"
(2.9-6.4)
Gray
SECP7GA*
LNP7BPK100
PG7
.11"-.25"
(2.9-6.4)
Black
SECP7BA*
LNP7BPK100
PG9
.18"-.31"
(4.6-7.9)
Gray
SECP9GA*
LNP9BPK100
PG9
.18"-.31"
(4.6-7.9)
Black
SECP9BA*
LNP9BPK100
PG11
.23"-.40"
(5.8-10.0)
Gray
SECP11GA*
LNP11BPK100
PG11
.23"-.40"
(5.8-10.0)
Black
SECP11BA*
LNP11BPK100
PG13.5
.17"-.47"
(4.3-11.9)
Gray
SECP13GA
LNP13BPK100
PG13.5
.17"-.47"
(4.3-11.9)
Black
SECP13BA
LNP13BPK100
PG16
.23"-.53"
(5.8-13.5)
Gray
SECP16GA
LNP16BPK100
PG16
.23"-.53"
(5.8-13.5)
Black
SECP16BA
LNP16BPK100
PG21
.45"-.71"
(11.4-17.9)
Gray
SECP21GA
LNP21BPK100
PG21
.45"-.71"
(11.4-17.9)
Black
SECP21BA
LNP21BPK100
PG29
.59"-.99"
(15-25.2)
Gray
SECP29GA
LNP29BPK25
PG29
.59"-.99"
(15-25.2)
Black
SECP29BA
LNP29BPK25
PG36
.88"-1.30"
(22.2-32.0)
Gray
SECP36GA
LNP36BPK25
PG36
.88"-1.30"
(22.2-32.0)
Black
SECP36BA
LNP36BPK25
SECP29GA
Low Profile Metric Cord Connectors
Hub Size
Cord Diameter
Inches
(mm)
Color
Catalog Number
Non-metallic Locknuts
M12
.12"-.25"
(2.9-6.4)
Gray
SECM12G
LNM12BPK100
M12
.12"-.25"
(2.9-6.4)
Black
SECM12B
LNM12BPK100
M16
.11"-.31"
(2.7-7.9)
Gray
SECM16G
LNM16BPK100
M16
.11"-.31"
(2.7-7.9)
Black
SECM16B
LNM16BPK100
M20
.17"-.45"
(4.3-11.4)
Gray
SECM20G*
LNM20BPK100
M20
.17"-.45"
(4.3-11.4)
Black
SECM20B*
LNM20BPK100
M25
.49"-.71"
(12.3-18.0)
Gray
SECM25G*
LNM25BPK100
M25
.49"-.71"
(12.3-18.0)
Black
SECM25B*
LNM25BPK100
M32
.59"-1.00"
(15.0-25.4)
Gray
SECM32G*
LNM32BPK100
M32
.59"-1.00"
(15.0-25.4)
Black
SECM32B*
LNM32BPK100
M40
.87"-1.30"
(22.0-32.0)
Gray
SECM40G
LNM40BPK100
M40
.87"-1.30"
(22.0-32.0)
Black
SECM40B
LNM40BPK100
LNP29BPK25
Note: See pages V-87 to V-96 for technical information and dimensional drawings.
Catalog numbers above with “PK100” suffix, i.e. LNP7BPK100, are bulk packed 100 per carton.
Catalog numbers above with “PK25” suffix, i.e. LNP29BPK25, are bulk packed 25 per carton.
*Items indicated are UL recognized components.
∆Panzergewinde.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-83
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Accessories
Multi-Hole Cord Grip Connectors
SEC100BSMH9
NPT
Hub Size
Cord Diameter
Inches
(mm)
Color
Holes
½
.205"
(5.2mm)
Black
2
SEC50B252
¾
.205"
(5.2mm)
Black
3
SEC75B352
¾
.205"
(5.2mm)
Black
4
SEC75B452
½
.220"
(5.6mm)
Black
3
SEC50B356
1
.215"
(5.5mm)
Black
9*
SEC100BSMH9
1¼
.215"
(5.5mm)
Black
13*
SEC125BSMH13
Catalog Number
Note: *Skinned bushings, field configurable.
Cord Connector Parts
Bushing
Catalog Number
Color Code
GOTCHA® Ring
Catalog Number
F1
31518101BPK100
31518102BPK100
31518103BPK100
31518104BPK100
31518105BPK100
31518106BPK100
Green
Orange
Red
Black
White
Blue
31648035GPK100
31648036GPK100
31648037GPK100
31648038GPK100
31605010GPK100
31648039GPK100
(4.76-6.35)
(6.35-9.50)
(9.50-12.7)
(12.7-15.8)
F2
31518110BPK100
31518111BPK100
31518112BPK100
31518113BPK100
Red
White
Blue
Brown
31648042GPK100
31605015GPK100
31648043GPK100
31648044GPK100
.375"-.500"
.500"-.625"
.625"-.750"
.750"-.875"
(9.50-12.7)
(12.7-15.8)
(15.8-19.0)
(19.0-22.2)
F3
31518116BPK100
31518117BPK100
31518118BPK100
31518119BPK100
Blue
Brown
Yellow
Orchid
31648045GPK100
31648046GPK100
31648047GPK100
31648048GPK100
.500"-.625"
.625"-.750"
.750"-.875"
.875"-1.00"
1.00"-1.125"
(12.7-15.8)
(15.8-19.0)
(19.0-22.2)
(22.2-25.4)
(25.4-28.5)
F4
31518123BPK100
31518124BPK100
31518125BPK100
31518126BPK100
31518127BPK100
Brown
Yellow
Orchid
Gray
Pink
31648050GPK100
31648051GPK100
31648052GPK100
31648053GPK100
31648054GPK100
NPT
Hub Size
Cord Diameter
Inches
(mm)
¼, ³⁄₈, ½
.062"-.125"
.125"-.187"
.187"-.250"
.250"-.312"
.312"-.375"
.375"-.437"
(1.58-3.17)
(3.17-4.76)
(4.76-6.35)
(6.35-7.93)
(7.93-9.50)
(9.50-11.1)
½, ¾
.187"-.250"
.250"-.375"
.375"-.500"
.500"-.625"
½, ¾
1
Form
Size
Note: Catalog numbers above with “PK100” suffix, i.e. 31518101BPK100, are bulk packed 100 per carton
Locknuts and
Metal Clad Sealing O-Rings
NPT
Hub Size
Zinc-Plated Steel Locknuts
Non-Metallic Locknuts
Metal Clad Sealing O-Rings*
¼
³⁄₈
½
¾
—
—
00322001LPK50
00322002LPK50
31622001LPK50
31622002LPK50
31622003LPK50
31622007LPK50
—
—
20509001
20509002
1
1¼
1½
00322003LPK50
00322004LPK50
00322005LPK50
31622008LPK50
—
—
20509003
20509004
20509005
2
2½
3
—
—
—
—
—
—
20509006
20509007
20509008
Note: Catalog numbers above with “PK50” suffix, i.e. 00322001LPK50, are bulk packed 50 per carton.
See page V-96 for technical information and dimensional drawings.
*UL listed and CSA certified.
V-84
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Hubbell Juniors® Miniature Connectors
Features and Benefits
Nylon spiral provides arc-of-bend control
for cord protection
Nylon compression nut has a tapered
interior dome to easily drive the
bushing into the connector body
Patented GOTCHA® ring incorporates
a split hinge design to prevent friction
and provide strain relief
Lubricated neoprene bushing
compresses evenly for a liquidtight
seal and added pull-out protection
Nylon connector body is a one piece
design with a tapered interior that seals
the bushing evenly for a positive seal
Threaded hexagon shaped nylon
locknut secures tightly and is also
corrosion resistant
Hubbell Juniors are a miniature liquidtight version of the
full-sized Hubbell cord connectors. They feature the same
GOTCHA® ring technology and neoprene bushings.
www.hubbell-wiring.com
They also come with or without a nylon spiral for arc-ofbend control and longer cord life. They are available in ¼",
³⁄₈", and ½" NPT sizes in both gray and black.
®
Wiring Device-Kellems
V-85
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Hubbell Juniors® Miniature Nylon Cord Connectors
Miniature Nylon Cord Connector
Gray Cord Connector
NPT
Hub Size
Cord Diameter Range
Inches
(mm)
Gray
Black
¼
.08"-.14"
.14"-.20"
.20"-.27"
(1.9-3.4)
(3.4-5.1)
(5.1-6.7)
HJ1001GPK25
HJ1002GPK25
HJ1003GPK25
HJ1001BPK25
HJ1002BPK25
HJ1003BPK25
³⁄₈
.15"-.21"
.21"-.28"
.28"-.34"
(3.7-5.3)
(5.3-7.0)
(7.0-8.6)
HJ1004GPK25
HJ1005GPK25
HJ1006GPK25
HJ1004BPK25
HJ1005BPK25
HJ1006BPK25
½
.06"-.13"
.13"-.19"
.19"-.25"
.25"-.31"
.31"-.38"
.38"-.44"
(1.6-3.2)
(3.2-4.7)
(4.7-6.3)
(6.3-7.9)
(7.9-9.5)
(9.5-11.1)
HJ1055GPK25
HJ1056GPK25
HJ1057GPK25
HJ1058GPK25
HJ1059GPK25
HJ1060GPK25
HJ1055BPK25
HJ1056BPK25
HJ1057BPK25
HJ1058BPK25
HJ1059BPK25
HJ1060BPK25
Black Cord Connector
Miniature Nylon Cord Connector with Spiral
Gray Cord Connector
with Spiral
Black Cord Connector
with Spiral
NPT
Hub Size
Cord Diameter Range
Inches
(mm)
Gray
Black
¼
.08"-.14"
.14"-.20"
.20"-.27"
(1.9-3.4)
(3.4-5.1)
(5.1-6.7)
HJ1010GPK25
HJ1011GPK25
HJ1012GPK25
HJ1010BPK25
HJ1011BPK25
HJ1012BPK25
³⁄₈
.15"-.21"
.21"-.28"
.28"-.34"
(3.7-5.3)
(5.3-7.0)
(7.0-8.6)
HJ1013GPK25
HJ1014GPK25
HJ1015GPK25
HJ1013BPK25
HJ1014BPK25
HJ1015BPK25
½
.13"-.19"
.19"-.25"
.25"-.31"
.31"-.38"
.38"-.44"
(3.2-4.7)
(4.7-6.3)
(6.3-7.9)
(7.9-9.5)
(9.5-11.1)
HJ1038GPK25
HJ1039GPK25
HJ1040GPK25
HJ1041GPK25
HJ1042GPK25
HJ1038BPK25
HJ1039BPK25
HJ1040BPK25
HJ1041BPK25
HJ1042BPK25
¾
.25"-.49"
.45"-.71"
(6.4-12.3)
(11.4-18.0)
HJ1043GPK25*
HJ1044GPK25*
HJ1043BPK25*
HJ1044BPK25*
Note: *Locknuts sold separately, see page V-84 for additional information.
Miniature Nylon Snap-In Cord Connector with Spiral
Gray Snap-In
Cord Connector
Cord Diameter Range
Inches
(mm)
For Chassis Thickness
Gray
Black
.22"-.27"
(5.6-6.9)
.10" (2.5) Max
HS1001GPK25
HS1001BPK25
.28"-.32"
(7.1-8.1)
.10" (2.5) Max
HS1002GPK25
HS1002BPK25
.30"-.36"
(7.6-9.1)
.13" (3.2) Max
HS1003GPK25
HS1003BPK25
.32"-.43"
(8.1-10.9)
.13" (3.2) Max
HS1004GPK25
HS1004BPK25
Note: Catalog numbers above with “PK25” suffix, i.e. HJ1001GPK25, are bulk packed 25 per carton.
See page V-97 for technical information and dimensional drawings.
Black Snap-In
Cord Connector
V-86
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Cord Connectors
Operating Temperatures
Material
Temperature Range
Aluminum
Nylon (connectors and GOTCHA® rings)
Plated steel*
Stainless steel*
Neoprene (bushings)
-40°F to +300°F
-40°F to +225°F
-60°F to +1000°F
-60°F to +1000°F
-30°F to +240°F
(-40°C to +149°C)
(-40°C to +107°C)
(-51°C to +537°C)
(-51°C to +537°C)
(-34°C to +115°C)
Note: *Due to the limiting factors of nylon and neoprene, any complete cord connector with a GOTCHA ring, Form 1-5, will continuously perform in the range of -30°F to
+225°F (-34°C to +107°C).
Cord connectors without GOTCHA rings, Form 6-8, will continuously operate in the range -30°F to +240°F (-34°C to +115°C) due to the limiting factor of neoprene.
Hazardous Locations
Hubbell cord connectors are suitable for use in hazardous locations per Class I Div. 2, Class II Div. 1 & 2, Class Ill Div. 1 & 2 in accordance with the NEC.
Flammability
Hubbell nylon cord connectors have a UL 94-V2 rating.
Approvals
Agency
UL Listed in accordance with Standard 514B for indoor/outdoor use.
CSA Certified.
United States Coast Guard Approved, Title 46-Part 111.
Form Size Definition
The term “Form Size” refers to the physical overall size of a cord connector.
Form 1 is the smallest size.
Form 8 is the largest size.
Knockout Holes
Knockout Hole Recommended
NPT Min. to Max.
Hub Size
Inches
(mm)
Knockout Hole Recommended
PG
Hub Size
Inches (mm)
Knockout Hole Recommended
Metric
Hub Size
Inches (mm)
¼
.54"-.57"
(13.7-14.5)
PG7
492"
(12.5)
M12
.472"
(12)
³⁄₈
.67"-.70"
(17.0-17.8)
PG9
599"
(15.2)
M16
.629"
(16)
(20)
½
.86"-.91"
(21.8-23.0)
PG11
.733"
(18.6)
M20
.787"
¾
1.04"-1.09"
(26.4-27.8)
PG13.5
.804"
(20.4)
M25
.984"
(25)
1
1.36"-1.41"
(34.5-35.7)
PG16
.888"
(22.5)
M32
1.25"
(32)
1¼
1.72"-1.77"
(43.7-44.9)
PG21
1.15"
(28.3)
M40
1.57"
(40)
1½
1.97"-2.02"
(50.0-51.2)
PG29
1.47"
(34.3)
2
2.45"-2.50"
(62.3-63.5)
PG36
1.85"
(47.0)
2½
2.95"-3.00"
(75.0-76.2)
3
3.58"-3.63"
(90.9-92.1)
NPT, PG and Metric Thread Low Profile Connectors
Specifications
Material
Gland
Temperature Range
Protection Class
Flammability
Listings/Certifications
6/6 Nylon.
Buna N.
-22°F to 225°F (-30°C to 107°C).
Cord Connectors are Halogen and Silicon free.
IP66 Suitability.
UL 94V-2.
UL Listing File E-41567, UL Recognition File E-41567.
CSA File LR27378C, VDE Marks Licence #136681.
SECP29G
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-87
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Cord Connectors
Straight Hubbell Connectors
Aluminum Inches (mm)
F
NPT
Inches
A
Form Dia.
B
Nylon Inches (mm)
C
D
Throat
Dia.
Ref.
E
A
B
C
D
Throat
Dia.
E
A/C*
A/F*
Dia.
Ref.
A/C*
A/F*
¼-18
1
.88"
(22.4)
.90"
(22.9)
.46"
(11.7)
.32"
(8.1)
.99"
(25.1)
.88"
(22.4)
1.00"
(25.4)
1.10"
(27.9)
.43"
(10.9)
.33"
(8.4)
.1.00"
(25.4)
.93"
(23.6)
³⁄₈-18
1
.88"
(22.4)
.90"
(22.9)
.46"
(11.7)
.44"
(11.2)
.99"
(25.1)
.88"
(22.4)
1.00"
(25.4)
1.10"
(27.9)
.43"
(10.9)
.45"
(11.4)
.1.00"
(25.4)
.93"
(23.6)
½-14
1
.88"
(22.4)
.90"
(22.9)
.46"
(11.7)
.44"
(11.2)
1.00"
(25.4)
.88"
(22.4)
1.00"
(25.4)
1.10"
(27.9)
.46"
(11.7)
.45"
(11.4)
.1.00"
(25.4)
.93"
(23.6)
½-14
2
1.13"
(28.7)
1.10"
(27.9)
.55"
(14.0)
.64"
(16.3)
1.11"
(28.2)
1.00"
(25.4)
1.32"
(33.5)
1.50"
(38.1)
.53"
(13.5)
.58"
(14.7)
1.25"
(31.7)
1.12"
(28.4)
½-14
3
1.38"
(35.1)
1.50"
(38.1)
.55"
(14.0)
.64"
(16.3)
1.40"
(35.6)
1.25"
(31.7)
—
—
—
—
—
—
¾-14
2
1.13"
(28.7)
1.10"
(27.9)
.55"
(14.0)
.64"
(16.3)
1.29"
(32.8)
1.13"
(28.7)
—
—
—
—
—
—
¾-14
3
1.38"
(35.1)
1.50"
(38.1)
.55"
(14.0)
.82"
(20.8)
1.40"
(35.6)
1.25"
(31.7)
1.56"
(39.6)
1.60"
(40.6)
.55"
(14.0)
.77"
(19.6)
1.44"
(36.6)
1.31"
(33.3)
1-11½
4
1.75"
(44.4)
1.60"
(40.6)
.71"
(18.0)
1.02"
(25.9)
1.81"
(46.0)
1.62"
(41.1)
1.88"
(47.8)
1.75"
(44.4)
.70"
(17.8)
1.01"
(25.7)
1.84"
(46.7)
1.63"
(41.4)
1-11½
5
2.31"
(58.7)
1.70"
(43.2)
.66"
(16.8)
1.01"
(25.7)
2.28"
(57.9)
2.00"
(50.8)
—
—
—
—
—
—
1¼-11½
5
2.31"
(58.7)
1.70"
(43.2)
.74"
(18.8)
1.26"
(32.0)
2.28"
(57.9)
2.12"
(53.8)
—
—
—
—
—
—
1½-11½
5
2.31"
(58.7)
1.70"
(43.2)
.74"
(18.8)
1.38"
(35.1)
2.28"
(57.9)
2.12"
(53.8)
—
—
—
—
—
—
1½-11½
6
3.00"
(76.2)
2.20"
(55.9)
.75"
(19.0)
1.50"
(38.1)
2.97"
(75.4)
2.75"
(69.8)
—
—
—
—
—
—
2-11½
6
3.00"
(76.2)
2.20"
(55.9)
.80"
(20.3)
1.92"
(48.8)
3.24"
(82.4)
3.00"
(76.2)
—
—
—
—
—
—
2-11½
7
3.85"
(97.8)
2.70"
(68.6)
.88"
(22.4)
1.94"
(49.3)
4.05"
(102.9)
3.75"
(95.2)
—
—
—
—
—
—
2½-8
7
3.85"
(97.8)
2.70"
(68.6)
1.30"
(33.0)
2.32"
(58.9)
4.34"
(110.2)
4.02"
(102.1)
—
—
—
—
—
—
2½-8
8
4.75"
(120.6)
2.70"
(68.6)
1.25"
(31.7)
2.38"
(60.5)
4.86"
(123.4)
4.50"
(114.3)
—
—
—
—
—
—
3-8
7
3.85"
(97.8)
2.70"
(68.6)
1.30"
(33.0)
2.54"
(64.5)
4.34"
(110.2)
4.02"
(102.1)
—
—
—
—
—
—
3-8
8
4.50"
(114.3)
2.70"
(68.6)
1.38"
(35.1)
3.00"
(76.2)
4.86"
(123.4)
4.50"
(114.3)
—
—
—
—
—
—
Note: *A/C— Across Corners; A/F—Across Flats.
A
(Overall)
B Ref.
E
F
C
D
Dimensions shown are approximate and
are subject to change without notice.
V-88
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Cord Connectors
Straight Hubbell Connectors
Zinc-Plated Steel Inches (mm)
F
NPT
Inches
A
Form A/C*
B
Stainless Steel Inches (mm)
C
D
Throat
Dia.
E
A
B
C
D
Throat
Dia.
E
A/F*
Ref.
A/C*
A/F*
A/C*
A/F*
Ref.
A/C*
A/F*
¼- 18
1
—
—
—
—
—
—
—
1.01"
(25.7)
.88"
(22.4)
.90"
(22.9)
.46"
(11.7)
.38"
(9.7)
.87"
(22.1)
.75"
(19.0)
³⁄₈-18
1
.98"
(24.9)
.88"
(22.4)
.90"
(22.9)
.42"
(10.7)
.45"
(11.4)
.99"
(25.1)
.88"
(22.4)
1.01"
(25.7)
.88"
(22.4)
.90"
(22.9)
.46"
(11.7)
.45"
(11.4)
.87"
(22.1)
.75"
(19.0)
½-14
1
.98"
(24.9)
.88"
(22.4)
.90"
(22.9)
.55"
(14.0)
.45"
(11.4)
1.00"
(25.4)
.88"
(22.4)
—
—
—
—
—
—
—
½-14
2
1.27"
(32.3)
1.13"
(28.7)
1.20"
(30.5)
.55"
(14.0)
.64"
(16.3)
1.10"
(28.2)
1.00"
(25.4)
1.30"
(33.0)
1.13"
(28.7)
1.10"
(27.9)
.54"
(13.7)
.63"
(16.0)
1.16"
(29.5)
1.00"
(25.4)
½-14
3
1.55"
(39.4)
1.38"
(35.1)
1.50"
(38.1)
.55"
(14.0)
.64"
(16.3)
1.40"
(35.6)
1.25"
(31.7)
—
—
—
—
—
—
—
¾-14
2
1.27"
(32.3)
1.13"
(28.7)
1.20"
(30.5)
.55"
(14.0)
.64"
(16.3)
1.29"
(32.8)
1.13"
(28.7)
—
—
—
—
—
—
—
¾-14
3
1.55"
(39.4)
1.38"
(35.1)
1.40"
(35.6)
.55"
(14.0)
.82"
(20.8)
1.40"
(35.6)
1.25"
(31.7)
1.59"
(40.4)
1.38"
(35.1)
1.30"
(33.0)
.56"
(14.2)
.81"
(20.6)
1.44"
(36.6)
1.25"
(31.7)
1-11½
3
1.55"
(39.4)
1.38"
(35.1)
1.40"
(35.6)
.70"
(17.8)
.89"
(22.6)
1.54"
(39.1)
1.38"
(35.1)
—
—
—
—
—
—
—
1-11½
4
1.92"
(48.8)
1.69"
(42.9)
1.60"
(40.6)
.70"
(17.8)
1.02"
(25.9)
1.95"
(49.5)
1.69"
(42.9)
2.02"
(51.3)
1.75"
(44.4)
1.40"
(35.6)
.70"
(17.8)
1.03"
(26.2)
1.88"
(47.8)
1.63"
(41.4)
1-11½
5
2.40"
(61.0)
—
1.70"
(43.2)
.70"
(17.8)
1.02"
(25.9)
2.46"
(62.5)
2.15"
(54.6)
—
—
—
—
—
—
—
1¼-11½
5
2.40"
(61.0)
—
1.70"
(43.2)
.73"
(18.5)
1.27"
(32.3)
2.48"
(63.0)
2.19"
(55.6)
—
—
—
—
—
—
—
1½-11½
5
2.40"
(61.0)
—
1.70"
(43.2)
.74"
(18.8)
1.39"
(35.3)
2.48"
(63.0)
2.19"
(55.6)
—
—
—
—
—
—
—
1½-11½
6
3.06"
(77.7)
—
2.20"
(55.9)
.75"
(19.0)
1.52"
(38.6)
3.04"
(77.2)
2.83"
(71.9)
—
—
—
—
—
—
—
2-11½
6
3.06"
(77.7)
—
2.20"
(55.9)
.78"
(19.8)
1.92"
(48.8)
3.32"
(84.3)
3.07"
(78.0)
—
—
—
—
—
—
—
2-11½
7
3.95"
(100.3)
—
2.70"
(68.6)
.78"
(19.8)
1.99"
(50.5)
4.18"
(106.2)
3.89"
(98.8)
—
—
—
—
—
—
—
Note: *A/C— Across Corners; A/F—Across Flats.
A
(Overall)
B Ref.
E
F
C
D
Dimensions shown are approximate and
are subject to change without notice.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-89
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Cord Connectors
45° Hubbell Connectors
Aluminum Inches (mm)
F
NPT
Inches
A
Form Dia.
B
Zinc Plated Steel Inches (mm)
E
C
D
Throat
Dia.
Across Across
Corners Flats
Ref.
G
A
B
C
D
Throat
Dia.
E
Across Across
Corners Flats
G
Across Across
Corners Flats
Dia.
Dia.
Ref.
½-14
2
2.00"
(50.8)
1.90"
(48.3)
.55"
(14.0)
.56"
(14.2)
1.27"
(32.3)
1.10"
(27.9)
1.13"
(28.6)
1.97"
(50.0)
1.90"
(48.3)
.55"
(14.0)
.57"
(14.4)
1.24"
(31.5)
1.06"
(26.9)
1.27"
(32.3)
1.13"
(28.6)
¾-14
3
2.30"
(58.4)
2.50"
(65.3)
.56"
(14.2)
.75"
(19.0)
1.48"
(37.6)
1.28"
(32.5)
1.38"
(34.9)
—
—
—
—
—
—
—
—
1-11½
4
2.60"
(66.0)
2.80"
(71.1)
.70"
(17.8)
1.00"
(25.4)
1.69"
(42.9)
1.50"
(38.1)
1.75"
(44.4)
—
—
—
—
—
—
—
—
1½-11½
5
3.90"
(99.1)
3.90"
(9.91)
.74"
(18.8)
1.25"
(31.7)
2.45"
(62.2)
2.13"
(54.0)
2.31"
(58.7)
—
—
—
—
—
—
—
—
1½-11½
5
3.90"
(99.1)
3.90"
(99.1)
.74"
(18.8)
1.50"
(38.1)
2.45"
(62.2)
2.13"
(54.0)
2.31"
(58.7)
—
—
—
—
—
—
—
—
G
A
B
C
D
Throat
Dia.
E
Across Across
Corners Flats
G
Across Across
Corners Flats
90° Hubbell Connectors
Aluminum Inches (mm)
F
NPT
Inches
A
Form Dia.
B
Zinc Plated Steel Inches (mm)
E
C
D
Throat
Dia.
Across Across
Corners Flats
Dia.
Dia.
Ref.
³⁄₈-18
1
1.27"
(32.3)
Ref.
2.00"
(50.8)
.46"
(11.7)
.44"
(11.2)
1.15"
(29.2)
1.10"
(27.9)
.88"
(22.2)
—
—
—
—
—
—
—
—
½-14
2
1.56"
(39.6)
2.30"
(58.4)
.50"
(12.7)
.55"
(13.9)
1.30"
(33.0)
1.13"
(28.7)
1.13"
(28.6)
1.65"
(41.9)
2.38"
(60.5)
.55"
(14.0)
.55"
(13.8)
1.29"
(32.8)
1.13"
(28.7)
1.27"
(32.3)
1.13"
(28.6)
¾-14
3
1.79"
(45.5)
2.80"
(71.1)
.56"
(14.2)
.77"
(19.4)
1.49"
(37.8)
1.31"
(33.3)
1.38"
(34.9)
1.88"
(47.8)
2.90"
(73.7)
.56"
(14.2)
.77"
(19.4)
1.52"
(38.6)
1.33"
(33.8)
1.55"
(39.2)
1.38"
(34.9)
1-11½
4
2.08"
(52.8)
3.20"
(81.3)
.70"
(17.8)
1.00"
(25.4)
1.70"
(43.2)
1.50"
(38.1)
1.75"
(44.4)
2.16"
(54.9)
3.20"
(81.3)
.70"
(17.8)
1.00"
(25.4)
1.72"
(43.7)
1.50"
(38.1)
1.92"
(48.8)
1.69"
(42.8)
1¼-11½
5
3.18"
(80.8)
4.30"
(109.2)
.73"
(18.5)
1.26"
(32.0)
2.47"
(62.7)
2.15"
(54.6)
2.31"
(58.7)
—
—
—
—
—
—
—
—
1½-11½
5
3.18"
(80.8)
4.30"
(109.2)
.75"
(19.2)
1.50"
(38.1)
2.47"
(62.7)
2.15"
(54.6)
2.31"
(58.7)
—
—
—
—
—
—
—
—
2-11½
6
3.51"
(89.2)
5.50"
(139.7)
.80"
(20.3)
1.92"
(48.8)
2.98"
(75.7)
2.78"
(70.6)
3.00"
(76.2)
—
—
—
—
—
—
—
—
C
D
Throat
Dia.
E
Across Across
Corners Flats
G
90° Hubbell Connectors
Nylon Inches (mm)
F
NPT
Inches
A
Form Dia.
B
Ref.
Dia.
³⁄₈-18
1
—
—
—
—
—
—
—
½-14
2
1.41"
(35.8)
2.50"
(63.5)
.55"
(14.0)
.58"
(14.6)
1.23"
(31.2)
1.12"
(28.2)
1.32"
(33.4)
¾-14
3
1.65"
(41.9)
2.81"
(71.4)
.56"
(14.2)
.77"
(19.4)
1.42"
(36.1)
1.29"
(32.8)
1.56"
(39.6)
1-11½
4
1.99"
(50.5)
3.30"
(83.8)
.70"
(17.8)
1.01"
(25.7)
1.82"
(46.2)
1.60"
(40.6)
1.88"
(47.6)
G
B Ref.
B Ref.
G
A
Ref.
A
E
E
C
F
C
F
D
D
Dimensions shown are approximate and
are subject to change without notice.
V-90
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Cord Connectors
A
(Overall)
Female Hubbell Connectors
Aluminum Inches (mm)
A
B
Dia.
Ref.
1
.88"
(22.4)
1.40"
(35.6)
½-14
2
1.13"
(28.7)
¾-14
2
1-11½
F
NPT
Inches
Form
³⁄₈-18
C
E
D
Throat
Dia.
Across
Corners
Across
Flats
.56"
(14.2)
.44"
(11.2)
.94"
(23.9)
.81"
(20.6)
1.80"
(45.7)
.56"
(14.2)
.63"
(16.0)
1.15"
(29.2)
1.00"
(25.4)
1.13"
(28.7)
2.10"
(53.3)
.75"
(19.0)
.63"
(16.0)
1.44"
(36.6)
1.25"
(31.7)
4
1.75"
(44.5)
2.30"
(58.4)
.88"
(22.4)
1.10"
(27.9)
1.88"
(47.8)
1.63"
(41.4)
1¼-11½
5
2.31"
(58.7)
2.80"
(71.1)
.95"
(24.1)
1.43"
(36.3)
2.64"
(67.1)
2.29"
(58.2)
1½-11½
5
2.31"
(58.7)
2.80"
(71.1)
.95"
(24.1)
1.43"
(36.3)
2.64"
(67.1)
2.29"
(58.2)
B Ref.
E
D
C (N.P.T. Thread Depth)
A
(Overall)
B Ref.
E
F
C
D
Underground Feeder Connectors
Aluminum Inches (mm)
F
NPT
Inches
A
Form Dia.
B
C
Ref.
Zinc-Plated Steel Inches (mm)
D
E
Throat
Dia.
A/C* A/F*
A
A/C*
B
A/F*
C
Nylon Inches (mm)
D
E
Throat
Dia.
A/C* A/F*
Ref.
A
B
Dia.
Ref.
C
D
E
Throat
Dia.
A/C* A/F*
½-14
2
1.13" 1.10" .55" .64" 1.10" 1.00" 1.27" 1.13" 1.20" .55" .64" 1.11" 1.00" 1.32" 1.50" .55" .58" 1.25" 1.13"
(28.7) (27.9) (14.0) (16.3) (27.9) (25.4) (32.3) (28.7) (30.5) (14.0) (16.3) (28.2) (25.4) (33.5) (38.1) (14.0) (14.7) (31.7) (28.7)
¾-14
2
1.13" 1.10" .55" .64" 1.29" 1.13" 1.27" 1.13" 1.20" .55" .64" 1.29" 1.13" —
(28.7) (27.9) (14.0) (16.3) (32.8) (25.4) (32.3) (28.7) (30.5) (14.0) (16.3) (32.8) (28.7)
¾-14
3
1.13" 1.50" .55" .82" 1.40" 1.25" 1.55" 1.38" 1.40" .56" .82" 1.40" 1.25" 1.56" 1.60" .56" .77" 1.44" 1.31"
(28.7) (38.1) (14.0) (20.8) (35.6) (31.7) (39.4) (35.1) (35.6) (14.2) (20.8) (35.6) (31.7) (39.6) (40.6) (14.2) (19.6) (36.6) (33.3)
—
—
—
—
—
Note: *A/C - Across Corners; A/F - Across Flats.
Low Profile Non-Metallic NPT, PG and Metric Thread Connectors
Nylon Inches (mm)
Hub Size
A
B
C
D
E
F
³⁄₈ NPT
0.670" (17.0)
1.41" (35.8)
0.48" (12.4)
0.21" (5.3)
0.83" (21.0)
0.55" (14.0)
½ NPT
0.875" (22.2)
1.70" (43.2)
0.61" (15.5)
0.21" (5.3)
0.88" (24.8)
0.66" (16.8)
¾ NPT
1.068" (27.1)
2.00" (50.8)
0.62" (15.7)
0.25" (6.3)
1.30" (33.0)
0.85" (21.6)
1 NPT
1.375" (35.0)
2.41" (61.2)
0.76" (19.3)
0.30" (7.6)
1.73" (43.9)
1.05" (26.7)
PG7
0.492" (12.5)
1.16" (29.5)
0.32" (8.1)
0.21" (5.3)
0.63" (16.0)
0.48" (12.4)
PG9
0.599" (15.2)
1.25" (31.8)
0.32" (8.1)
0.21" (5.3)
0.83" (21.0)
0.55" (14.0)
PG11
0.733" (18.6)
1.48" (37.6)
0.38" (9.7)
0.21" (5.3)
0.94" (23.9)
0.70" (17.8)
PG13.5
0.804" (20.4)
1.53" (38.9)
0.41" (10.4)
0.21" (5.3)
0.98" (24.9)
0.66" (16.8)
PG16
0.888" (22.5)
1.68" (42.7)
0.44" (11.2)
0.25" (6.4)
1.06" (27.0)
0.76" (19.3)
PG21
1.15" (28.3)
1.89" (48.0)
0.52" (13.2)
0.25" (6.4)
1.30" (33.0)
.085" (21.6)
PG29
1.47" (37.30)
2.23" (56.6)
0.58" (14.7)
0.30" (7.6)
1.73" (43.9)
1.05" (26.7)
PG36
1.85" (47.0)
2.39" (60.7)
0.47" (11.9)
0.31" (7.9)
2.05" (52.7)
1.19" (30.2)
M12
0.473" (12.0)
1.16" (29.5)
0.32" (8.1)
0.21" (5.3)
0.63" (16.0)
0.49" (12.4)
M16
0.630" (16.0)
1.25" (31.8)
0.32" (8.1)
0.21" (5.3)
0.83" (21.0)
0.55" (14.0)
M20
0.787" (20.0)
1.53" (38.9)
0.41" (10.4)
0.21" (5.3)
0.98" (24.9)
0.66" (16.8)
M25
0.985" (25.0)
1.89" (48.0)
0.52" (13.2)
0.25" (6.3)
1.30" (33.0)
0.85" (21.6)
M32
1.260" (32.0)
2.23" (56.6)
0.58" (14.7)
0.30" (7.6)
1.73" (43.9)
1.05" (26.7)
M40
1.575" (40.0)
2.39" (60.7)
0.48" (12.2)
0.30" (7.6)
2.05" (52.1)
1.19" (30.2)
www.hubbell-wiring.com
®
B
F
D
C
E
SEALING NUT
A
Recommended
knockout size
Dimensions shown are approximate and
are subject to change without notice.
Wiring Device-Kellems
V-91
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Cord Connectors
2 Conductors
Cord Type
SVO, SV, SVT
SJ, SJO, SJT, SJTO
Cord Size
#18
#18
#16
#14
#18
#16
#14
#12
#10
#8
Approx. Dia.
Inches (mm)
.25"
(6.2)
.31"
(7.8)
.33"
(8.4)
.37"
(9.3)
.38"
(9.7)
.40"
(10.2)
.54"
(13.7)
.62"
(15.6)
.68"
(17.1)
.81"
(20.6)
Color
Black
Black
White
White
Blue
Blue
Brown
Brown
Yellow
Orchid
NPT
S, SO, ST, STO
Form Catalog Number*
¼
1
HC1004
HC1004
HC1005
HC1005
HC1006
HC1006
—
—
—
—
³⁄₈
1
HC1010
HC1010
HC1011
HC1011
HC1012
HC1012
—
—
—
—
½
1
HC1016
HC1016
HC1017
HC1017
HC1018
HC1018
—
—
—
—
½
2
HC1022
HC1022
HC1022
HC1022
HC1023
HC1023
HC1024
HC1024
—
—
½
3
—
—
—
—
HC1025
HC1025
HC1026
HC1026
HC1027
HC1028
¾
2
HC1032
HC1032
HC1032
HC1032
HC1033
HC1033
HC1034
HC1034
—
—
¾
3
—
—
—
—
HC1035
HC1035
HC1036
HC1036
HC1037
HC1038
1
4
—
—
—
—
HC1039
HC1039
HC1040
HC1040
HC1041
HC1042
1
5
—
—
—
—
—
—
—
—
—
HC1045
1¼
5
—
—
—
—
—
—
—
—
—
HC1050
1½
5
—
—
—
—
—
—
—
—
—
HC1055
1½
6
—
—
—
—
—
—
—
—
—
—
2
6
—
—
—
—
—
—
—
—
—
—
2
7
—
—
—
—
—
—
—
—
—
—
2½
7
—
—
—
—
—
—
—
—
—
—
3
7
—
—
—
—
—
—
—
—
—
—
Note: *Must add prefix, see Note 1; suffix, see Note 2, on page V-95.
‡F5 and larger will not be color coded.
3 Conductors
Cord Type
SVO, SV, SVT
SJ, SJO, SJT, SJTO
Cord Size
#18
#18
#16
#14
#18
#16
#14
#12
#10
#8
Approx. Dia.
Inches (mm)
.26"
(6.5)
.33"
(8.3)
.35"
(8.9)
.39"
(9.8)
.39"
(9.9)
.42"
(10.7)
.57"
(14.4)
.65"
(16.4)
.71"
(18.0)
.85"
(21.5)
Color
Black
White
White
Blue
Blue
Blue
Brown
Yellow
Yellow
Orchid
NPT
S, SO, ST, STO
Form Catalog Number*
¼
1
HC1004
HC1005
HC1005
HC1006
HC1006
HC1006
—
—
—
—
³⁄₈
1
HC1010
HC1011
HC1011
HC1012
HC1012
HC1012
—
—
—
—
½
1
HC1016
HC1017
HC1017
HC1018
HC1018
HC1018
—
—
—
—
½
2
HC1022
HC1022
HC1022
HC1023
HC1023
HC1023
HC1024
—
—
—
½
3
—
—
—
HC1025
HC1025
HC1025
HC1026
HC1027
HC1027
HC1028
¾
2
HC1032
HC1032
HC1032
HC1033
HC1033
HC1033
HC1034
—
—
—
¾
3
—
—
—
HC1035
HC1035
HC1035
HC1036
HC1037
HC1037
HC1038
1
4
—
—
—
HC1039
HC1039
HC1039
HC1040
HC1041
HC1041
HC1042
1
5
—
—
—
—
—
—
—
—
—
HC1045
1¼
5
—
—
—
—
—
—
—
—
—
HC1050
1½
5
—
—
—
—
—
—
—
—
—
HC1055
1½
6
—
—
—
—
—
—
—
—
—
—
2
6
—
—
—
—
—
—
—
—
—
—
2
7
—
—
—
—
—
—
—
—
—
—
2½
7
—
—
—
—
—
—
—
—
—
—
3
7
—
—
—
—
—
—
—
—
—
—
Note: *Must add prefix, see Note 1; suffix, see Note 2, on page V-95.
‡F5 and larger will not be color coded.
V-92
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Cord Connectors
2 Conductors
Cord Type
SVO, SV, SVT
SJ, SJO, SJT, SJTO
Cord Size
#6
#4
#3
#2
#1
#1/0
#2/0
#3/0
#4/0
#250
Approx. Diameter .94"
Inches (mm)
(23.8)
1.08"
(27.4)
1.17"
(29.7)
1.27"
(33.3)
1.44"
(36.6)
1.52"
(38.6)
1.65"
(41.9)
1.77"
(45.0)
1.92"
(48.8)
2.16"
(51.9)
Color
Pink‡
‡
‡
‡
‡
‡
‡
‡
‡
NPT
Gray‡
S, SO, ST, STO
Form Catalog Number*
¼
1
—
—
—
—
—
—
—
—
—
—
³⁄₈
1
—
—
—
—
—
—
—
—
—
—
½
1
—
—
—
—
—
—
—
—
—
—
½
2
—
—
—
—
—
—
—
—
—
—
½
3
—
—
—
—
—
—
—
—
—
—
¾
2
—
—
—
—
—
—
—
—
—
—
¾
3
—
—
—
—
—
—
—
—
—
—
1
4
HC1043
HC1044
—
—
—
—
—
—
—
—
1
5
HC1046
HC1047
HC1048
HC1049
—
—
—
—
—
—
1¼
5
HC1051
HC1052
HC1053
HC1054
—
—
—
—
—
—
1½
5
HC1056
HC1057
HC1058
HC1059
—
—
—
—
—
—
1½
6
—
—
—
HC1060
HC1061
HC1062
HC1063
HC1064
—
—
2
6
—
—
—
HC1065
HC1066
HC1067
HC1068
HC1069
—
—
2
7
—
—
—
—
—
—
—
HC1070
HC1071
HC1073
2½
7
—
—
—
—
—
—
—
HC1076
HC1077
HC1079
3
7
—
—
—
—
—
—
—
HC1086
HC1087
HC1089
Note: *Must add prefix, see Note 1; suffix, see Note 2, on page V-95.
‡F5 and larger will not be color coded.
3 Conductors
CordType
SVO, SV, SVT
SJ, SJO, SJT, SJTO
Cord Size
#6
S, SO, ST, STO
#4
#3
#2
#1
#1/0
#2/0
#3/0
#4/0
#250
Approx. Diameter 1.00"
Inches (mm)
(25.4)
1.17"
(29.7)
1.24"
(31.5)
1.34"
(34.0)
1.51"
(38.4)
1.65"
(41.9)
1.75"
(44.5)
1.80"
(48.0)
2.07"
(52.6)
2.39"
(60.7)
Color
‡
‡
‡
‡
‡
‡
‡
‡
‡
NPT
Gray‡
Form Catalog Number*
¼
1
—
—
—
—
—
—
—
—
—
—
³⁄₈
1
—
—
—
—
—
—
—
—
—
—
½
1
—
—
—
—
—
—
—
—
—
—
½
2
—
—
—
—
—
—
—
—
—
—
½
3
—
—
—
—
—
—
—
—
—
—
¾
2
—
—
—
—
—
—
—
—
—
—
¾
3
—
—
—
—
—
—
—
—
—
—
1
4
HC1044
—
—
—
—
—
—
—
—
—
1
5
HC1047
HC1048
HC1048
HC1049
—
—
—
—
—
—
1¼
5
HC1052
HC1053
HC1053
HC1054
—
—
—
—
—
—
1½
5
HC1057
HC1058
HC1058
HC1059
—
—
—
—
—
—
1½
6
—
—
—
HC1060
HC1062
HC1063
HC1064
—
—
—
2
6
—
—
—
HC1065
HC1067
HC1068
HC1069
—
—
—
2
7
—
—
—
—
—
—
HC1070
HC1071
HC1073
HC1075
2½
7
—
—
—
—
—
—
HC1076
HC1077
HC1079
HC1081
3
7
—
—
—
—
—
—
HC1086
HC1087
HC1089
HC1091
Note: *Must add prefix, see Note 1; suffix, see Note 2, on page V-95.
‡F5 and larger will not be color coded.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-93
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Cord Connectors
4 Conductors
Cord Type
SJ, SJO, SJT, SJTO
Cord Size
#18
S, SO, ST, STO
#16
#14
#18
#16
#14
#12
#10
#8
Approx. Diameter .36"
Inches (mm)
(9.0)
.39"
(9.8)
.43"
(10.8)
.42"
(10.7)
.45"
(11.4)
.61"
(15.5)
.70"
(17.8)
.77"
(19.4)
.97"
(24.6)
Color
Blue
Blue
Blue
Blue
Brown
Yellow
Orchid
Gray‡
NPT
White
Form Catalog Number*
¼
1
HC1005
HC1006
HC1006
HC1006
—
—
—
—
—
³⁄₈
1
HC1011
HC1012
HC1012
HC1012
—
—
—
—
—
½
1
HC1017
HC1018
HC1018
HC1018
—
—
—
—
—
½
2
HC1022
HC1023
HC1023
HC1023
HC1023
HC1024
—
—
—
½
3
—
HC1025
HC1025
HC1025
HC1025
HC1026
HC1027
HC1028
—
¾
2
—
HC1033
HC1033
HC1033
HC1033
HC1034
—
—
—
¾
3
—
HC1035
HC1035
HC1035
HC1035
HC1036
HC1037
HC1038
—
1
4
—
HC1039
HC1039
HC1039
HC1039
HC1040
HC1041
HC1042
HC1043
1
5
—
—
—
—
—
—
—
—
HC1046
1¼
5
—
—
—
—
—
—
—
—
HC1051
1½
5
—
—
—
—
—
—
—
—
HC1056
1½
6
—
—
—
—
—
—
—
—
—
2
6
—
—
—
—
—
—
—
—
—
2
7
—
—
—
—
—
—
—
—
—
2½
7
—
—
—
—
—
—
—
—
—
3
7
—
—
—
—
—
—
—
—
—
Note: *Must add prefix, see Note 1; suffix, see Note 2, on page V-95.
‡F5 and larger will not be color coded.
5 Conductors
Cord Type
S, SO, ST, STO
Cord Size
#18
#16
#14
#12
#10
#8
Approx. Dia.
Inches (mm)
.50"
.54"
.70"
.76"
.83"
1.06"
1.18"
(12.7)
(13.7)
(17.7)
(19.3)
(21.1)
(26.9)
(30.0)
Blue
Brown
Yellow
Orchid‡
Orchid‡
Pink‡
‡
Color
NPT
#6
Form Catalog Number*
½
2
HC1023
HC1024
—
—
—
—
½
3
HC1025
HC1026
HC1027
HC1028
HC1028
—
—
—
¾
2
HC1033
HC1034
—
—
—
—
—
¾
3
HC1035
HC1036
HC1037
HC1038
HC1038
—
—
1
4
HC1039
HC1040
HC1041
HC1042
HC1042
HC1044
—
1
5
—
—
—
HC1045
HC1045
HC1047
HC1048
1¼
5
—
—
—
HC1050
HC1050
HC1052
HC1053
1½
5
—
—
—
HC1055
HC1055
HC1057
HC1058
Note: *Must add prefix, see Note 1; suffix, see Note 2, on page V-95.
‡F5 and larger will not be color coded.
V-94
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Cord Connectors
4 Conductors
Cord Type
SJ, SJO, SJT, SJTO
Cord Size
#6
#4
#3
#2
#1
#1/0
#2/0
#3/0
#4/0
Approx. Diameter
Inches (mm)
.94"
(23.8)
1.08"
(27.4)
1.17"
(29.7)
1.27"
(33.3)
1.44"
(36.6)
1.52"
(38.6)
1.65"
(41.9)
1.77"
(45.0)
1.92"
(48.8)
Pink‡
‡
‡
‡
‡
‡
‡
‡
‡
Color
NPT
Form
S, SO, ST, STO
Catalog Number*
¼
1
—
—
—
—
—
—
—
—
—
³⁄₈
1
—
—
—
—
—
—
—
—
—
½
1
—
—
—
—
—
—
—
—
—
½
2
—
—
—
—
—
—
—
—
—
½
3
—
—
—
—
—
—
—
—
—
¾
2
—
—
—
—
—
—
—
—
—
¾
3
—
—
—
—
—
—
—
—
—
1
4
HC1044
—
—
—
—
—
—
—
—
1
5
HC1047
HC1049
HC1049
—
—
—
—
—
—
1¼
5
HC1052
HC1054
HC1054
—
—
—
—
—
—
1½
5
HC1057
HC1059
HC1059
—
—
—
—
—
—
1½
6
—
HC1060
HC1060
HC1061
HC1063
HC1064
—
—
—
2
6
—
HC1064
HC1065
HC1066
HC1068
HC1069
—
—
—
2
7
—
—
—
—
—
HC1070
HC1071
HC1073
HC1074
2½
7
—
—
—
—
—
HC1076
HC1077
HC1079
HC1080
3
7
—
—
—
—
—
HC1086
HC1087
HC1089
HC1090
Note: *Must add prefix, see Note 1; suffix, see Note 2, below.
‡F5 and larger will not be color coded.
Note:
1. Add the proper prefix to the HC number to identify
the type of connector desired:
SHC = Straight Hubbell Connector
NHC = 90° Hubbell Connector
FHC = Female Hubbell Connector
VHC = 45° Hubbell Connector
2. Add the proper suffix to identify material desired:
Aluminum = No suffix
Zinc-Plated Steel = ZP
Corrosion Resistant Nylon = CR
Stainless Steel = SS
www.hubbell-wiring.com
3. This chart is a general guide to assist in the selection of
Hubbell Cord Connectors for various cord sizes. The Hubbell
Cord Connector catalog numbers selected, have been
inserted into spaces which in our judgment represent the
best cord connector which will fit the listed cord size.
The diameters of the cords are approximate and may vary
depending on the manufacturer. It is suggested that the
appropriate cord manufacturer’s dimension chart be
consulted for exact dimensions.
4. Cable jacket may have to be stripped to allow conductors
to pass through connector body.
®
Wiring Device-Kellems
V-95
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Locknuts and Sealing O-Rings
NPT Thread Locknuts
Zinc-Plated Steel
B
Maximum
Diameter
C
Minimum
Thk.
A
Thread Size
(N.P.S.)
NPT
Hub
Size
A
Inside Diameter
Inches
B
Outside Dia.
Inches (mm)
C
Thickness
Inches (mm)
Steel
Catalog Number
½
½"-14
1.14"
(29.0)
.09"
(2.3)
00322001LPK50
¾
¾"-14
1.43"
(36.3)
.11"
(2.8)
00322002LPK50
1
1"-11½
1.77"
(45.0)
.13"
(3.3)
00322003LPK50
1¼
1¼"-11½
2.28"
(57.9)
.13"
(3.3)
00322004LPK50
1½
1½"-11½
2.60"
(66.0)
.13"
(3.3)
00322005LPK50
Metal Clad Sealing O-Rings – Sizes ½ - 4
Zinc-Plated Steel with Neoprene Ring
A
B
C
NPT
Hub
Size
A
Inside Diameter
Inches
(mm)
B
Outside Dia.
Inches (mm)
C
Thickness
Inches (mm)
Catalog Number
½
.80"
(20.3)
1.08"
(27.4)
.16"
(3.2)
20509001
¾
1.00"
(25.4)
1.34"
(34.0)
.16"
(3.2)
20509002
1
1.25"
(31.6)
1.63"
(41.4)
.16"
(3.2)
20509003
1¼
1.61"
(40.9)
2.00"
(50.8)
.16"
(3.2)
20509004
1½
1.84"
(46.7)
2.36"
(59.9)
.16"
(3.2)
20509005
2
2.31"
(58.7)
2.83"
(71.9)
.16"
(3.2)
20509006
Chrome Plated Steel with Neoprene Ring
2½
2.91"
(73.9)
3.44"
(87.4)
.24"
(6.1)
20509007
3
3.52"
(89.4)
4.08"
(103.6)
.24"
(6.1)
20509008
Nylon PG Thread Locknuts
B
A
C
PG Thread
Size
A
Inches
(mm)
B
Inches (mm)
C
Inches (mm)
Catalog Number
PG7
.75"
(19.1)
.80"
(20.3)
.22"
(5.6)
LNP7BPK100
PG9
.86"
(21.8)
.91"
(23.2)
.22"
(5.6)
LNP9BPK100
PG11
.94"
(23.9)
1.03"
(26.2)
.22"
(5.6)
LNP11BPK100
PG13.5
1.06"
(26.9)
1.14"
(29.0)
.24"
(6.1)
LNP13BPK100
PG16
1.18"
(30.0)
1.30"
(33.0)
.25"
(6.1)
LNP16BPK100
PG21
1.41"
(35.8)
1.54"
(39.1)
.25"
(6.1)
LNP21BPK100
PG29
1.81"
(46.0)
2.00"
(50.8)
.25"
(6.1)
LNP29BPK25
PG36
2.24"
(56.9)
2.50"
(63.5)
.25"
(6.1)
LNP36BPK25
Nylon Metric Thread Locknuts
PG Thread
Size
A
Inches
(mm)
B
Inches (mm)
C
Inches (mm)
Catalog Number
M12
.75"
(19.1)
.82"
(20.8)
.22"
(5.6)
LNM12BPK100
M16
.87"
(22.09)
.98"
(25.0)
.22"
(5.6)
LNM16BPK100
M20
1.06"
(27.0)
1.18"
(30.0)
.25"
(6.4)
LNM20BPK100
M25
1.38"
(35.1)
1.54"
(39.1)
.28"
(7.1)
LNM25BPK100
M32
1.61"
(40.9)
1.80"
(45.7)
.28"
(7.1)
LNM32BPK100
M40
1.97"
(50.0)
2.18"
(55.4)
.28"
(7.1)
LNM40BPK100
Dimensions shown are approximate and
are subject to change without notice.
V-96
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Hubbell Juniors® Miniature Nylon Cord Connectors
Hubbell Juniors®
Material
Operating Temperature Range
Nylon (connectors and GOTCHA® rings)
Neoprene (bushings)
-40°F to +225°F (-40°C to +107°C)
-30°F to +240°F (-34°C to +115°C)
Due to the limiting factors of nylon and neoprene, any complete liquidtight Hubbell Junior will continuously perform in the range
of -30°F to +225°F (-34°C to +107°C).
Snap-In continuously performs -40°F to +225°F (-40°C to +107°C).
Flammability
Hubbell Juniors have a UL 94V-2 rating.
Certifications
Product
Agency
Liquidtight and Liquidtight with Spiral
UL Listed.
CSA Certified.
UL Recognized.
CSA Certified.
Snap-In
Knockout Holes
NPT
Hub Size
Knockout Hole
Recommended
Min. to Max.
inches
(mm)
¼
³⁄₈
½
.54"-.57"
.67"-.70"
.86"-.91"
(13.7-14.5)
(17.0-17.8)
(21.8-23.1)
Snap-In
G
Dimensional
Specifications
Diameter
Range
Inches
(mm)
For Chassis
Thickness
(Max.)
Inches
(mm)
Required
Hole Size
A
Inches
(mm)
B
Inches
(mm)
C
Inches
(mm)
D
Inches
(mm)
E
Inches
(mm)
F
Inches
(mm)
G
Inches
(mm)
.22"-.27"
(5.6-6.9)
.10"
(2.5)
.50"
(12.7)
.45"
(11.4)
.28"
(7.1)
.28"
(7.1)
.54"
(13.7)
.12"
(3.0)
1.84"
(44.2)
.28"-.32"
(7.1-8.1)
.10"
(2.5)
.50"
(12.7)
.47"
(11.9)
.28"
(7.1)
.33"
(8.4)
.59"
(15.0)
.12"
(3.0)
1.84"
(44.2)
.30"-.36"
(7.6-9.1)
.13"
(3.3)
.63"
(16.0)
.55"
(14.0)
.36"
(9.1)
.37"
(9.4)
.65"
(16.5)
.14"
(3.6)
2.18"
(55.4)
.32"-.43"
(8.1-10.9)
.13"
(3.3)
.75"
(19.0)
.66"
(16.8)
.45"
(11.4)
.44"
(11.2)
.75"
(19.1)
.14"
(3.6)
2.60"
(66.0)
C
D
F
E
A
Chassis
Thickness
Max
B
B
Liquidtight
C
C
Inches
(mm)
D
Throat
Dia.
Inches
(mm)
Across
Corners
Inches
(mm)
Across
Flats
Inches
(mm)
1.30"
(33.0)
.40"
(10.2)
.29"
(7.4)
.65"
(16.5)
.60"
(15.2)
.81"
(20.6)
1.44"
(36.6)
.41"
(10.4)
.36"
(9.1)
.81"
(20.6)
.75"
(19.1)
1.00"
(25.4)
1.56"
(39.6)
.46"
(11.7)
.45"
(11.4)
.99"
(25.1)
.92"
(23.4)
A
Dia.
Inches
(mm)
B
Ref.
Inches
(mm)
¼-18
.65"
(16.5)
³⁄₈-18
½-14
F
NPT
Inches
E
D
A
F
E
Liquidtight with Spiral
C
Inches
(mm)
D
Throat
Dia.
Inches
(mm)
2.55"
(64.8)
.40"
(10.2)
.81"
(20.6)
3.10"
(78.7)
1.00"
(25.4)
3.72"
(94.5)
A
Dia.
Inches
(mm)
B
Ref.
Inches
(mm)
¼-18
.65"
(16.5)
³⁄₈-18
G
NPT
Inches
½-14
www.hubbell-wiring.com
F
B
E
Inches
(mm)
Across
Corners
Inches
(mm)
Across
Flats
Inches
(mm)
.29"
(7.4)
.27"
(6.9)
.65"
(16.5)
.60"
(15.2)
.41"
(10.4)
.36"
(9.1)
.35"
(8.9)
.81"
(20.6)
.75"
(19.1)
.46"
(11.7)
.45"
(11.4)
.45"
(11.4)
.99"
(25.1)
.92"
(23.4)
®
A
C
E
D
G
F
Dimensions shown are approximate and
are subject to change without notice.
Wiring Device-Kellems
V-97
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
PolyTuff® I and PolyTuff® II Non-Metallic Liquidtight Conduit
Features and Benefits
PolyTuff® I Conduit, Gray
PolyTuff® II Tubing, Black
Rigid PVC core bonded to
flexible PVC jacket
All non-metallic construction
ends metal fatigue and
separation problems
PVC core with corrugated walls
bonded to PVC jacket
Cuts cleanly with a knife
or PVC cutter so there are
no jagged metal edges
Handles twists, turns, bends,
switchbacks and straightaways
with ease
UL Listed and
CSA Certified
All non-metallic construction
ends fatigue and separation
problems
Can be cut with a knife
or PVC cutters
UL Recognized and
CSA Certified
IP66
PolyTuff®
SUITABILITY
I Conduit
Trade Size (metric designator)
Feet (m)
Catalog Number
³⁄₈ (12)
100 (30.5)
G1038
½ (16)
100 (30.5)
G1050
¾ (21)
100 (30.5)
G1075
1 (27)
100 (30.5)
G1100
1¼ (35)
100 (30.5)
G1125
1½ (41)
50 (15.2)
G1150
2 (53)
50 (15.2)
G1200
Note: See pages V-66 and V-67, V-100 and V-101 for approved fittings.
See pages V-102 and V-103 for technical information and dimensional drawings.
IP66
PolyTuff®
SUITABILITY
II Tubing
Trade Size (metric designator)
Feet (m)
Catalog Number
¼ (10)
100 (30.5)
B2025
³⁄₈ (12)
100 (30.5)
B2038
½ (16)
100 (30.5)
B2050
¾ (21)
100 (30.5)
B2075
1 (27)
100 (30.5)
B2100
1¼ (35)
100 (30.5)
B2125
1½ (41)
50 (15.2)
B2150
2 (53)
50 (15.2)
B2200
Note: See page V-100 for approved fittings.
See pages V-102 and V-103 for technical information and dimensional drawings.
V-98
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
PolyTuff® Non-Metallic and Metallic Liquidtight Conduit Fittings
Features and Benefits
Nylon two-piece swivel body enables
fitting to twist from 0° to 90°
Non-integral ferrule provides
conduit seal and superior
pullout protection
Nylon compression nut has
a tapered dome to tighten
ferrule onto conduit
Neoprene O-ring provides
liquidtight seal at hub or enclosure
Nylon locknut fastens connector
securely to enclosure and provides
superior corrosion resistance
Hexagonal, screw-machined steel thru 1",
and malleable iron on larger sizes.
Nut compresses gland-ring onto conduit
Split, nylon, gland-ring compresses
conduit onto ferrule
Non-integral, reusable steel,
ferrule is easily installed, to
seal conduit
Threaded one-piece
steel body
Tapered, machined threads fasten securely
and provide additional liquidtight sealing
Optional insulated and
non-insulated throat
Nylon gasket provides
liquidtight seal at hub
Locknut has hardened steel
tangs to grip securely
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-99
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
PolyTuff® Non-Metallic Liquidtight Fittings
UL Listed to
Type 4, 4X, 12 and 13
Straight with Male Non-Metallic Liquidtight Fittings
Trade Size
(metric designator)
Black
Catalog Number
Gray
Catalog Number
¼ (10)
F2025
P038NBKA
P050NBKA
P075NBKA
P100NBKA
—
P038NGYA
P050NGYA
P075NGYA
P100NGYA
P125NBK
P150NBK
P200NBK
P125NGY
P150NGY
P200NGY
³⁄₈ (12)
½ (16)
¾ (21)
P075NGYA
1 (27)
1¼ (35)
1½ (41)
2 (53)
Note: Fittings are to be used with PolyTuff I and PolyTuff II.
See pages V-104 and V-105 for technical information and dimensional drawings.
³⁄₈" Liquidtight conduit fitting have ½ NPT male threads.
P125NGY
SwivelLok® Multi-Position with Male Non-Metallic Liquidtight Fittings
Trade Size
(metric designator)
Black
Catalog Number
Gray
Catalog Number
³⁄₈ (12)
PS0389NBK
PS0509NBK
PS0759NBK
PS1009NBK
PS0389NGY
PS0509NGY
PS0759NGY
PS1009NGY
½ (16)
¾ (21)
1 (27)
Note: Fittings are to be used with PolyTuff I and PolyTuff II.
See pages V-104 and V-105 for technical information and dimensional drawings.
³⁄₈" Liquidtight conduit fitting have ½ NPT male threads.
PS0509NGY
SwivelLok® Multi-Position
Fixed 90°Fittings for Non-Metallic Conduit
Trade Size
(metric designator)
Black
Catalog Number
Gray
Catalog Number
³⁄₈ (12)
P0389NBK
P0509NBK
P0759NBK
P1009NBK
P1259NBK
P0389NGY
P0509NGY
P0759NGY
P1009NGY
P1259NGY
½ (16)
¾ (21)
1 (27)
1¼ (35)
Note: Fittings are to be used with PolyTuff I and PolyTuff II.
See pages V-104 and V-105 for technical information and dimensional drawings.
³⁄₈⁄"⁄ Liquidtight conduit fitting have ½ NPT male threads.
P1259NGY
SwivelLok® Flexible Conduit Kit
Trade Size
(metric designator)
Fitting and Conduit
Catalog Number
½ (16)
2 PS0509NGY, 6' G1050
¾ (21)
2 PS0759NGY, 6' G1075
PS05GYKIT
PS07GYKIT
Note: See pages V-104 and V-105 for technical information and dimensional drawings.
PS05GYKIT
V-100
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Metallic Liquidtight Conduit Fittings
Straight Conduit Fitting
Trade Size
(metric designator)
Insulated
Non-Insulated
³⁄₈ (12)
½ (16)
¾ (21)
1 (27)
H0381
H0501
H0751
H1001
H038
H050
H075
H100
1¼ (35)
1½ (41)
2 (53)
2½ (63)
H1251
H1501
H2001
H2501
H125
H150
H200
H250
3 (78)
3½ (91)
4 (103)
H3001
H3501
H4001
H300
H350
H400
H050
Straight with Male
Hubbell Conduit Fitting
Note: ³⁄₈" Liquidtight conduit fitting have ½ NPT male threads.
For use with Liquidtight Metal conduit and PolyTuff I Non-Metallic conduit.
See page V-106 for technical information.
45° Conduit Fitting
Trade Size
(metric designator)
Insulated
Non-Insulated
³⁄₈ (12)
½ (16)
¾ (21)
1 (27)
H03841
H05041
H07541
H10041
H0384
H0504
H0754
H1004
1¼ (35)
1½ (41)
2 (53)
H12541
H15041
H20041
H1254
H1504
H2004
H0504
45° Angle with Male
Hubbell Conduit Fitting
Note: ³⁄₈" Liquidtight conduit fitting have ½ NPT male threads.
For use with Liquidtight Metal conduit and PolyTuff I Non-Metallic conduit.
See page V-106 for technical information.
90° Conduit Fitting
Trade Size
(metric designator)
Insulated
Non-Insulated
³⁄₈ (12)
½ (16)
¾ (21)
1 (27)
H03891
H05091
H07591
H10091
H0389
H0509
H0759
H1009
1¼ (35)
1½ (41)
2 (53)
2½ (63)
3 (78)
4 (103)
H12591
H15091
H20091
H25091
H30091
H40091
H1259
H1509
H2009
H2509
H3009
H4009
H0509
90° Angle with Male
Hubbell Conduit Fitting
Note: ³⁄₈" Liquidtight conduit fitting have ½ NPT male threads.
For use with Liquidtight Metal conduit and PolyTuff I Non-Metallic conduit.
See page V-106 for technical information.
www.hubbell-wiring.com
®
Wiring Device-Kellems
V-101
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Non-Metallic Liquidtight Conduit and Tubing
PolyTuff® I Conduit
Operating Temperature Range
Wet environment
Oil environment
Dry environment
0°F to +140°F (-18°C to +60°C).
0°F to +158°F (-18°C to +70°C).
0°F to +176°F (-18°C to +80°C).
Certifications
UL Listed
CSA Certified
UL Standard 1660. Sunlight resistant approved for outdoor use, direct burial.
Meets requirements of NEC.
Voltage Rating
Maximum
600V.
Material
Conduit
Co-extruded rigid and flexible PVC.
PolyTuff® II Tubing
Operating Temperature Range
Operating environment
0°F to +140°F (-18°C to +60°C).
Certifications
UL Recognized
CSA Certified
Voltage Rating
Maximum
Same as wire insulation rating.
Material
Tubing
Co-extruded rigid and flexible PVC.
PolyTuff® I Conduit
PolyTuff® II Tubing
Trade Size
(metric
designator)
Conduit ID/OD
Inches
(mm)
Bend Radius
Inches
(mm)
Trade Size
(metric
designator)
Conduit ID/OD
Inches
(mm)
Bend Radius
Inches
(mm)
³⁄₈ (12)
.49"/.70"
(12.6/17.8)
2.00"
(50.8)
¼ (10)
.36"/.57"
(9.3/14.5)
1.50"
(38.1)
½ (16)
.63"/.83"
(16.1/21.1)
3.00"
(76.2)
³⁄₈ (12)
.49"/.70"
(12.6/17.8)
2.00"
(50.8)
¾ (21)
.83"/1.04"
(21.1/26.4)
4.00"
(101.6)
½ (16)
.63"/.83"
(16.1/21.1)
2.00"
(50.8)
1 (27)
1.05"/1.30"
(26.0/33.1)
5.00"
(217.0)
¾ (21)
.83"/1.04"
(21.1/26.4)
3.00"
(76.2)
1¼ (35)
1.40"/1.65"
(35.4/41.8)
6.30"
(158.8)
1 (27)
1.05"/1.30"
(26.0/33.1)
3.00"
(76.2)
1½ (41)
1.59"/1.88"
(40.3/47.8)
7.50"
(190.5)
1¼ (35)
1.40"/1.65"
(35.4/41.8)
5.00"
(127.0)
2 (53)
2.03"/2.36"
(51.6/59.9)
10.00"
(254.0)
1½ (41)
1.59"/1.88"
(40.3/47.8)
5.00"
(127.0)
2 (53)
2.03"/2.36"
(51.6/59.9)
5.00"
(127.0)
V-102
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Non-Metallic Liquidtight Conduit and Tubing
PolyTuff® I and II Conduit/Tubing; PVC Chemical Resistance
Chemical
Conc.*
Acetate Solvents
Acetic Acid
Acetic Acid (Glacial)
Acetone
Acrylontrile
Alcohols (Aliphatic)
Aluminum Chloride
Aluminum Sulfate (Alums)
Ammonia (Anhydrous Liquids)
Ammonia (Aqueous)
Ammoniated Latex
Ammonium Chloride
Ammonium Hydroxide
Amyl Acetate
Aniline Oils
Aromatic Hydrocarbons
Asphalt
ASTM Fuel A
ASTM Fuel B
ASTM #1 Oil
ASTM #3 Oil
Barium Chloride
Barium Sulfide
Barium Hydroxide
Benzene (Benzol)
Benzine (Petroleum Ether)
Black Liquor
Bordeaux Mixture
Boric Acid
Butyl Acetate
Butyl Alcohol
Calcium Hydroxide
Calcium Hypochlorite
Carbolic Acid (Phenol)
Carbon Dioxide
Carbon Disulfide
Carbon Tetrachloride
Carbonic Acid
Casein
Caustic Soda
Chlorine Gas (wet)
Chlorine Gas (dry)
Chlorine (water solution)
Chlorobenzene
Chlorinated Hydrocarbons
Chromic Acid
Citric Acid
Coal Tar
Temp.
70°F 150°F
21°C 66°C
D
B
C
D
A
C
A
A
D
A
A
A
A
D
D
D
D
C
D
B
C
A
A
A
D
C
A
A
A
D
B
A
A
B
A
D
D
A
A
A
D
D
C
D
D
B
A
D
D
C
D
D
B
C
A
A
D
A
C
A
A
D
D
D
D
C
D
C
D
A
A
A
D
C
A
A
A
D
C
A
A
C
A
D
D
A
C
B
D
D
D
D
D
C
A
D
Chemical
Conc.*
Temp.
70°F 150°F
21°C 66°C
Coconut Oil
Corn Oil
Cottonseed Oil
Creosote
Cresol
Crysylic Acid
Cyclohexane
DDT Weed Killer
Dibutyl Phthalate
Diesel Oils
Diethylene Glycol
Diethyl Ether
Di-isodecyl Phthalate
Dioctyl Phthalate
Dow General Weed Killer (Phenol)
Dow General Weed Killer (H2O)
Ethyl Alcohol
Ethylene Dichloride
Ethylene Glycol
Ferric Chloride
Ferric Sulfate
Ferrous Chloride
Ferrous Sulfate
Formaldehyde
Fuel Oil
Furfural
Gallic Acid
Gasoline (Hi Test)
Glycerine
Grease
Green Sulfate Liquor
Heptachlor in Petroleum Solvents
Heptane
Hexane
Hydrobromic Acid
Hydrochloric Acid
10%
Hydrochloric Acid
40%
Hydrofluoric Acid
70%
Hydrofluorosilicic Acid
Hydrofluorosilicic Acid
10%
Hydrogen Peroxide
Iso-Octane
Isopropyl Acetate
Isopropyl Acid
Jet Fuels (JP-3, and 5)
Kerosene
Ketones
Linseed Oil
C
A
C
D
C
D
B
A
D
C
B
A
D
D
D
B
C
D
B
A
A
A
A
D
B
C
A
C
A
A
A
A
C
C
A
A
C
D
A
A
A
C
D
B
C
C
D
A
D
B
D
D
D
D
C
C
D
D
C
C
D
D
D
C
C
D
C
A
A
A
A
D
C
C
A
D
A
C
A
C
D
D
A
A
C
D
A
A
B
C
D
C
D
C
D
A
Note: *Conc. = Concentration.
(All ratings apply to concentrated or saturated solutions unless otherwise specified.)
Chemical resistance ratings are based upon information supplied by the raw material manufacturers.
Use as a general guide only – samples should be tested by user under actual conditions.
Chemical
Conc.*
Temp.
70°F
150°F
21°C
66°C
Lubricating Oils
A
Magnesium Chloride
A
Magnesium Hydroxide
A
Magnesium Sulfate
A
Malathion 50 in Aromatics
D
Malic Acid
A
Methyl Acetate
D
Methyl Alcohol
C
Methyl Bromide
D
Methyl Ethyl Ketone
D
Methylene Chloride
D
Mineral Oil
Monochlorobenezene
A
Muriatic Acid (see Hydrochloric Acid)
Naphtha
C
Naphthalene
D
Nitric Acid
10%
A
Nitric Acid
35%
A
Nitric Acid
70%
D
Oleic Acid
A
Oleum
D
Oxalic Acid
A
Pentachlorophenol in Oil
B
Pentane
C
Perchloroethylene
B
Petroleum Ether
C
Phenol
A
Phosphoric Acid
10%
A
Pitch
50%
A
Potassium Hydroxide
C
Sodium Cyanide
A
Stoddard Solvent
D
Styrene
D
Sulfur Dioxide (liquid)
D
Sulfuric Acid
50%
A
Sulfuric Acid
98%
D
Sulfurous Acid
B
Tall Oil
D
Tannic Acid
A
Toluene
D
Trichlorethylene
D
Triethanol Amine
C
Tricresyl Phosphate (Skydrol)
D
Turpentine
C
Vinegar
A
Vinyl Chloride
D
Water
A
White Liquor
A
Xylene
D
Zinc Chloride
A
Zinc Sulfate
A
A
A
A
A
D
A
D
C
D
D
D
A
D
D
B
C
D
C
D
A
C
D
C
C
A
A
B
D
A
D
D
D
B
D
C
D
A
D
D
D
D
D
B
D
A
A
D
A
A
Rating Code
A-Excellent service
C-Fair or limited service.
B-Good service life.
D-Unsatisfactory service.
No harmful effect to reduce service life. Suitable for
continuous service.
Moderate to minor effect. Good for intermittent service.
Generally suitable for continuous service.
www.hubbell-wiring.com
Depends on operating conditions. Generally suitable for intermittent
service. Not recommended for continuous service.
Not recommended.
®
Wiring Device-Kellems
V-103
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Non-Metallic Liquidtight Fittings
PolyTuff® Fittings
Operating Temperature*
Nylon (Body, Nut, Gripping Ring and Locknut)
Neoprene (Sealing Ring)
–40°F to +225°F (–40°C to +107°C).
–30°F to +240°F (–34°C to +116°C).
Flammability
Fire Gas Toxicity Product Testing
Nylon PolyTuff Fittings have a UL 94V-2 rating.
Certifications
UL Listed
CSA Certified
UL50 Type 4X, 12 and 13.
PolyTuff I Fittings, PolyTuff II Fittings.
Liquidtight Fittings
Operating Temperature**
Steel/Malleable Iron (Nut, Body, Ferrule)
Nylon (Gland Ring)
–60°F to +1000°F (–51°C to +538°C).
–40°F to +225°F (–40°C to +107°C).
Hazardous Locations - NEC Reference
Class I, Div. 2 - 501-10(A)(3)B
Class II, Div. 1 - 502-10(A)(2)
Class II, Div. 2 - 502-10(A)(3)
Class III, Div. 1 - 503-10(A)(2)
Class III, Div. 2 - 503-10(B)
Certifications
UL Listed to UL 514B
CSA Certified
Note: *Due to the limiting factors of nylon and neoprene, PolyTuff Fittings will continuously perform in the range –30°F to +225°F (–34°C to +107°C).
**Due to the limiting factors of nylon, metallic liquidtight flexible conduit fittings will continuously perform in the range of –40°F to +225°F (–40°C to +107°C).
V-104
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Non-Metallic Liquidtight Fittings
Straight with Male Non-Metallic Liquidtight Fittings
E
Trade
Size
(md**)
A
B
C
D
Throat
Dia.
¼
(10)
.93"
(23.6)
1.45"
(36.8)
.39"
(9.9)
.32"
(8.1)
³⁄₈
(12)
1.14"
(29.0)
1.63"
(41.4)
.57"
(14.5)
.42"
(10.7)
1.41"
(35.8)
1.30"
(33.0)
½
(16)
1.30"
(33.0)
2.14"
(54.4)
.57"
(14.5)
.55"
(14.0)
1.41"
(35.8)
1.30"
(33.0)
¾
(21)
1.53"
(38.9)
2.22"
(56.4)
.58"
(14.7)
.74"
(18.8)
1.85"
(47.0)
1.53"
(38.9)
1
(27)
1.80"
(45.7)
2.32"
(58.9)
.72"
(18.3)
.96"
(24.4)
1.94"
(49.3)
1.80"
(45.7)
1¼
(35)
2.20"
(55.9)
2.15"
(54.6)
.74"
(18.8)
1.30"
(33.0)
2.38"
(60.5)
2.18"
(55.4)
1½
(41)
2.49"
(63.2)
2.35"
(59.7)
.76"
(19.3)
1.46"
(37.1)
2.63"
(66.8)
2.43"
(61.7)
2
(53)
3.05"
(77.4)
2.51"
(63.6)
.79"
(20.1)
1.90"
(48.3)
3.13"
(79.5)
2.93"
(74.4)
Across
Corners
E
Across
Flats
.86" (Dia.)
(21.8)
A
Dia.
C
B
Sizes: ¼", 1¼", 1½", 2"
E
90° with Male Non-Metallic Liquidtight Fittings
Trade
Size
(md**)
A
B
C
D
Throat
Dia.
¼
(10)
.93"
(23.6)
1.88"
(47.8)
.39"
(9.9)
.32"
(8.1)
1¼
(35)
2.21"
(56.1)
3.57"
(90.7)
.74"
(18.9)
1.30"
(33.0)
D
A
D
E
Across
Corners
Across
Flats
C
.86"(Dia.)
(21.8)
2.38"
(60.5)
B
Sizes: 3/8", ½", ¾", 1"
2.18"
(55.4)
SwivelLok® Multi-Position Liquidtight Fittings
B
G
Trade
Size
(md**)
A
B
C
D
E
³⁄₈
(12)
1.30"
(33.0)
3.27"
(83.1)
.57"
(14.5)
.55"
(14.0)
½
(16)
1.30"
(33.0)
3.27"
(83.1)
.57"
(14.5)
¾
(21)
1.53"
(38.9)
3.66"
(93.0)
1
(27)
1.80"
(45.7)
4.00"
(101.6)
F
Across
Corners
Across
Flats
1.43"
(36.3)
2.00"
(50.8)
1.41"
(35.8)
1.30"
(33.0)
.55"
(14.0)
1.43"
(36.3)
2.00"
(50.8)
1.41"
(35.8)
1.30"
(33.0)
.58"
(15.7)
.74"
(18.8)
1.59"
(40.4)
2.23"
(56.6)
1.65"
(41.9)
1.53"
(38.9)
.72"
(18.3)
.96"
(24.4)
1.84"
(46.7)
2.30"
(58.4)
1.94"
(49.3)
1.80"
(45.7)
A
Dia.
E
C
D
Note: *A/C = Across Corners, A/F = Across Flats.
**md = metric designator.
A
F
G
D
C
E
90° Position
www.hubbell-wiring.com
B
45° Position
®
Wiring Device-Kellems
Straight Position
V-105
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Kellems® Wire Management Products
Technical Information
Metallic Liquidtight Fittings
Straight with Male Metallic Metal Fitting
E
D
Throat
Dia.
C
B
Ref.
A
C
E
Trade Size
(md**)
A
Ref.
B
A/C*
A/F*
D
Throat Dia.
A/C*
A/F*
³⁄₈
(12)
½
(16)
¾
(21)
1
(27)
1¼
(35)
1½
(41)
2
(53)
2½
(63)
3
(78)
3½
(91)
4
(103)
1.43"
(36.3)
1.43"
(36.3)
1.56"
(39.6)
1.68"
(42.7)
2.03"
(51.6)
2.21"
(56.1)
2.28"
(57.9)
3.56"
(90.4)
3.81"
(96.8)
3.81"
(96.8)
3.81"
(96.8)
.59"
(15.0)
.59"
(15.0)
.59"
(15.0)
.66"
(16.8)
.63"
(16.8)
.63"
(16.8)
.69"
(17.5)
1.06"
(26.9)
1.06"
(26.9)
1.06"
(26.9)
1.06"
(26.9)
1.20"
(30.0)
1.34"
(34.0)
1.55"
(39.0)
1.95"
(50.0)
2.39"
(61.0)
2.72"
(69.0)
3.08"
(78.0)
3.92"
(100.0)
4.70"
(119.0)
5.29"
(134.0)
5.75"
(146.0)
1.06"
(26.9)
1.19"
(30.2)
1.37"
(34.8)
1.69"
(42.9)
2.06"
(52.3)
2.38"
(60.5)
2.87"
(72.9)
3.62"
(91.9)
4.31"
(109.5)
4.81"
(122.2)
5.31"
(134.9)
.61"
(15.5)
.61"
(15.5)
.84"
(21.3)
1.06"
(26.9)
1.37"
(34.8)
1.53"
(38.9)
2.06"
(52.3)
2.42"
(61.5)
3.01"
(76.5)
3.49"
(88.6)
3.96"
(100.6)
1.07"
(27.2)
1.22"
(31.0)
1.43"
(36.3)
1.73"
(43.9)
2.36"
(59.9)
2.79"
(70.9)
3.32"
(84.3)
3.85"
(97.8)
4.65"
(118.1)
5.18"
(131.6)
5.75"
(146.1)
.93"
(23.6)
1.06"
(26.9)
1.25"
(31.8)
1.56"
(39.6)
2.08"
(52.8)
2.48"
(63.0)
2.90"
(73.7)
3.60"
(91.4)
4.33"
(110.0)
4.82"
(122.4)
5.39"
(136.9)
A/C*
A/F*
E
Throat Dia.
A/C*
A/F*
1.20"
(30.5)
1.34"
(34.0)
1.55"
(39.4)
1.95"
(49.5)
2.39"
(60.7)
2.72"
(69.1)
3.08"
(78.2)
1.06"
(26.9)
1.19"
(30.2)
1.45"
(36.8)
1.69"
(42.9)
2.06"
(52.3)
2.38"
(60.5)
2.88"
(73.2)
.60"
(15.2)
.61"
(15.2)
.84"
(21.3)
1.05"
(26.7)
1.37"
(34.8)
1.60"
(40.6)
2.05"
(52.1)
1.16"
(29.5)
1.21"
(30.7)
1.50"
(38.1)
1.82"
(46.2)
2.32"
(58.9)
2.62"
(66.5)
3.21"
(81.5)
1.02"
(25.9)
1.06"
(26.9)
1.32"
(33.5)
1.59"
(40.4)
2.03"
(5.16)
2.29"
(58.2)
2.80"
(71.1)
A/C*
A/F*
D
Ref.
E
Throat Dia.
A/C*
A/F*
1.20"
(30.5)
1.34"
(34.0)
1.55"
(39.4)
1.95"
(49.5)
2.39"
(60.7)
2.72"
(69.1)
3.08"
(78.2)
3.92"
(99.6)
4.70"
(119.4)
5.75"
(146.1)
1.06"
(26.9)
1.12"
(28.4)
1.45"
(36.8)
1.60"
(40.6)
2.06"
(52.3)
2.38"
(60.5)
2.87"
(72.9)
3.63"
(92.2)
4.31"
(109.5)
5.31"
(134.9)
1.44"
(36.6)
1.44"
(36.6)
1.63"
(41.4)
2.19"
(55.6)
2.50"
(63.5)
2.69"
(68.3)
3.25"
(82.6)
4.25"
(108.0)
4.87"
(123.7)
5.63"
(143.0)
.60"
(15.2)
.61"
(15.5)
.83"
(21.1)
1.05"
(26.7)
1.36"
(34.5)
1.61"
(40.9)
2.05"
(52.1)
2.42"
(61.5)
3.01"
(76.5)
3.96"
(100.6)
1.13"
(29.0)
1.12"
(28.0)
1.48"
(38.0)
1.80"
(46.0)
2.32"
(59.0)
2.58"
(66.0)
3.14"
(80.0)
3.78"
(96.0)
4.64"
(118.0)
5.76"
(146.0)
.99"
(25.1)
1.00"
(25.4)
1.29"
(32.8)
1.57"
(39.9)
2.02"
(51.3)
2.25"
(57.2)
2.75"
(69.9)
3.50"
(88.9)
4.30"
(109.2)
5.38"
(136.7)
45° with Male Metallic Metal Fitting
B
A
D
F
C
E
Throat
Dia.
Trade Size
(md**)
A
B
³⁄₈
(12)
½
(16)
¾
(21)
1
(27)
1¼
(35)
1½
(41)
2
(53)
1.19"
(30.2)
1.19"
(30.2)
1.19"
(30.2)
1.38"
(35.1)
1.42"
(36.1)
1.66"
(42.2)
1.69"
(42.9)
1.28"
(32.5)
1.28"
(32.5)
1.43"
(36.3)
1.53"
(38.9)
1.69"
(42.9)
2.00"
(50.8)
2.25"
(57.2)
C
D
.59"
(15.0)
.59"
(15.0)
.59"
(15.0)
.66"
(16.8)
.63"
(16.0)
.66"
(16.8)
.66"
(16.8)
F
90° with Male Metallic Metal Fitting
F
C
D
B
A
E
Throat
Dia.
Trade Size
(md**)
A
B
³⁄₈
(12)
½
(16)
¾
(21)
1
(27)
1¼
(35)
1½
(41)
2"
(53)
2½
(63)
3
(78)
4
(103)
1.31"
(33.3)
1.31"
(33.3)
1.44"
(36.6)
1.78"
(45.2)
1.97"
(50.0)
2.19"
(55.6)
2.53"
(64.3)
3.44"
(87.4)
3.75"
(95.3)
4.25"
(108.0)
.59"
(15.0)
.59"
(15.0)
.59"
(15.0)
.59"
(15.0)
.63"
(16.0)
.63"
(16.0)
.66"
(16.8)
1.00"
(25.4)
1.00"
(25.4)
1.00"
(25.4)
C
F
Note: *A/C = Across Corners, A/F = Across Flats.
**md = metric designator.
V-106
®
Wiring Device-Kellems
www.hubbell-wiring.com
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement