Alpha Technologies | IP Bell - 02 | alpha bs® Different by design - Busch

alpha bs® Different by design - Busch
alpha bs®
Different by design
alpha bs®. Your sense of style is unique. With alpha bs®
switches you can express it in every detail of your home,
adding a fresh, innovative touch that will enhance
contemporary and traditional interiors alike. Designed to meet
the highest safety standards and constructed from the most
durable, scratch-resistant materials, alpha bs® switches will
stay safe and stylish for a lifetime.
02
28 alpha bs® | Catalogue 2014/2015
03
01
alpha bs ®
01 Switch / socket outlet
studio white / studio white, Rocker switch similar to
RAL 9016
02 ivory / ivory (similar to RAL 1013)
03 studio white / studio white, Rocker switch similar to
RAL 9016
Contents
alpha bs®
Rocker switches p. 32
Socket Outlets p. 36
Special Devices p. 37
Telephone/Radio/TV, Data communication
p. 37
Room Thermostats
p. 40
Busch-Dimmer ®
p. 41
Busch Watchdog
p. 41
Busch-Timer ®
p. 42
Busch-Blind control
p. 42
Busch-Remote control IR
p. 43
Accessories
p. 44
Catalogue 2014/2015 | alpha bs® 29
alpha bs®
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
01
02
03
04
05
06
07
08
09
10
Rocker switch 1gang
Rocker switch 3gang
Busch-Universal rotary dimmer
Doorbell switch
Busch-Memory 2gang dimmer
IR sensor with 1gang control element
45 A Double pole switch mechanism
Busch-Comfort switch
Rocker switch 1gang with labelling field
Card switch
The alpha bs® switch range is available with all
kinds of inserts and control elements. With extreme
ease, you can thus raise the living comfort of your
customers, increase safety, or make the use of
power more economical.
30 alpha bs ® | Catalogue 2014/2015
11 15A DP switched socket outlet
12 13 A DP switched socket outlet
13 20A DP switch
14 13A connection unit with flex outlet
15 Busch-Blind control switch
16 Data communication outlet
17 Data communication outlet 2gang
18­
Busch-Blind control II
19 Comfort timer
20 Room thermostat with display
In communication systems/special connector
devices you will find the suitable solution for special
applications.
Different by design
21
22
21 Busch-iDock
22 DigitalRadio
23 Flush-mounted movement detector
24
25
26
27
Frames for installation in BS one gang,
two gang and dual gang box.
24 Side view: 12 mm x 86 mm
25 86 mm x 86 mm
26 86 mm x 157 mm
Catalogue 2014/2015 | alpha bs® 31
Rocker Switches
Product
Article-No.
Order-No.
Pack/Qty PG
Product
10 AX Rocker Switch Mechanism
With screw-type terminal
Rated voltage: 250 V~
Rated current: 10 AX
BS EN 60669-1, IEC 60669-1
1gang 1way, SP
2002/1 SUBS
1012-0-2077
Article-No.
Order-No.
Pack/Qty PG
Rocker
With transparent lens.
With symbol.
For flush-mounted push switch.
10/100
01
1gang 2way SP
2002/6 SUBS
1012-0-2079
10/100
01
1gang intermediate
2002/7 SUBS
1012-0-2080
10
01
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1789 LI-20
1789 LI-21
1789 LI-22G
1789 LI-24
1789 LI-260
1789 LI-266
1751-0-1633
1751-0-1724
1751-0-2516
1751-0-1864
1751-0-2828
1751-0-2839
10
10
10
10
10/100
10/100
04
04
01
01
04
04
10
10
10
10
10
10
04
04
01
01
04
04
10/100
01
10/100
01
1) Real metal surface.
10 AX Push-switch mechanism
1gang 1way, SP
With screw-type terminal.
Rated voltage: 250 V~
Rated current: 10 A
BS EN 60669-1, IEC 60669-1
2022 SUBS
1413-0-1055
Rocker
With transparent lens.
With key symbol.
For flush-mounted push switch.
10
01
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
10 AX Push-switch mechanism
1gang 2way SP
With screw-type terminal.
Rated voltage: 250 V~
Rated current: 10 A
BS EN 60669-1, IEC 60669-1
2022/6 SUBS
1413-0-1057
10
01
1789 TR-20
1789 TR-21
1789 TR-22G
1789 TR-24
1789 TR-260
1789 TR-266
1) Real metal surface.
10 AX Push-switch mechanism
2gang 1way SP
With screw-type terminal.
Rated voltage: 250 V~
Rated current: 10 A
BS EN 60669-1, IEC 60669-1
Rocker
For flush-mounted switch 1g1w, 1g2w, intermediate, push
switch.
2022/5 SUBS
20 platinum
21 bronze
22G ivory
24 studio white matt
260 palladium
266 titanium
1786-20-500
1786-21-500
1786-22G-500
1786-24-500
1786-260-500
1786-266-500
1751-0-3090
1751-0-3086
1751-0-3081
1751-0-3095
1751-0-3080
1751-0-3085
10/100
10/100
10/100
10/100
10/100
10/100
1751-0-1658
1751-0-1740
1751-0-2532
1751-0-1880
1751-0-2830
1751-0-2841
04
04
01
01
04
04
1413-0-1056
10 AX Rocker Switch Mechanism
2gang 1way
With screw-type terminal.
Rated voltage: 250 V~
Rated current: 10 AX
BS EN 60669-1, IEC 60669-1
Rocker
With bell symbol.
For flush-mounted push switch.
2002/5 SUBS
1012-0-2078
Rocker
For flush-mounted switch 2g 1w, 2g push switch.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
24G studio white
260 palladium 1)
266 titanium 1)
1789 KI-20
1789 KI-21
1789 KI-22G
1789 KI-24
1789 KI-24G
1789 KI-260
1789 KI-266
1) Real metal surface.
1751-0-1641
1751-0-1732
1751-0-2524
1751-0-1872
1751-0-2235
1751-0-2829
1751-0-2840
10
10
10
10
10
10
10
04
04
01
01
01
04
04
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium
266 titanium 1)
1785-20
1785-21
1785-22G
1785-24
1785-260-500
1785-266
1751-0-1682
1751-0-1773
1751-0-2565
1751-0-1914
1751-0-3082
1751-0-2838
10
10/100
10
10
10/100
10/100
04
04
01
01
04
04
10/100
01
1) Real metal surface.
10 AX Rocker Switch Mechanism
2gang 2way SP
With screw-type terminal.
Rated voltage: 250 V~
Rated current: 10 AX
BS EN 60669-1, IEC 60669-1
2003/6/6 SUBS
32 alpha bs® | Catalogue 2014/2015
1012-0-2081
Rocker Switches
Product
Article-No.
Order-No.
Pack/Qty PG
Product
Rocker
only for flush-mounted switch 2g 2w
22G ivory
24 studio white
1785-22G-101
1785-24-101
1751-0-2890
1751-0-2891
1012-0-2076
Order-No.
Pack/Qty PG
20 A Switch Rocker 1)
with red neon lens, with marking “water heater”
1gang 1way DP, neon lamp
10
10
01
01
22G ivory
1788 WH-22G
24 studio white matt 1788 WH-24
1751-0-2717
1751-0-2718
10
10
01
01
1) Real metal surface.
16 AX Rocker Switch Mechanism
3gang 1way, SP
screwless terminals
Rated voltage: 250 V~
Rated current: 16 AX
BS EN 60669-1, IEC 60669-1
106/3/1 UBS
Article-No.
Rocker
With transparent lens.
For flush-mounted switch 1g1w, 1g2w, intermediate, push
switch.
10/100
01
Rocker
3gang,
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1787-20
1787-21
1787-22G
1787-24
1787-260
1787-266
1751-0-2045
1751-0-2052
1751-0-2508
1751-0-2060
1751-0-2824
1751-0-2835
10
10
10
10
10/100
10/100
04
04
01
01
04
04
1) Real metal surface.
22G ivory
1783-22G
24 studio white matt 1783-24
24G studio white
1783-24G
1751-0-2867
1751-0-2425
1751-0-2433
10
10
10
01
01
01
20 A Double Pole Switch
1gang 1way
With screw-type terminal.
Rated voltage: 250 V~
Rated current: 20 A
BS EN 60669-1, IEC 60669-1
1020/2 USBS-101
1020-0-0057
10/100
01
20 A Switch Rocker
with marking “IO”
As cover for 2-pole or 3-pole flush-mounted on-off switch
and 2-pole control on-off switch.
22G ivory
1786 IO-22G
24 studio white matt 1786 IO-24
1751-0-2722
1751-0-2723
10
10
01
01
20 A Double Pole Switch
1gang 1way
With neon lamp, with screw type terminals.
Rated voltage: 250 V~
Rated current: 20 A
BS EN 60669-1, IEC 60669-1
1020/2 USKBS-101
1020-0-0058
10/100
01
20 A Switch Rocker
With red neon lens and marking
As cover for 2-pole or 3-pole flush-mounted on-off switch
and 2-pole control on-off switch.
20 platinum )
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1
1788-20
1788-21
1788-22G
1788-24
1788-260
1788-266
1) Real metal surface.
Technical information
www.BUSCH-JAEGER-catalogue.com
1751-0-1674
1751-0-1765
1751-0-2557
1751-0-1906
1751-0-2823
1751-0-2834
10
10
10
10
10
10
04
04
01
01
04
04
Rocker 1) 2) 3)
With labelling field.
For flush-mounted switch 1g1w, 1g2w, intermediate, push
switch.
Size of labelling field: 57 x 11 mm.
Illuminable.
20 platinum 4)
21 bronze 4)
22G ivory
24 studio white matt
260 palladium 4)
266 titanium 4)
1)
2)
3)
4)
10
10
10
10
10
10
04
04
01
01
04
04
Rocker Switch Mechanism
DP
With screw-type terminal
Rated voltage: 250 V~
Rated current: 20 A
IEC 60669-1
1gang 1way, normally open contact 1)
1020/2 US
1020-0-0023
10/100
01
Switch
1020/2 USK
10/100
01
1781-20
1781-21
1781-22G
1781-24
1781-260
1781-266
1751-0-1666
1751-0-1757
1751-0-2540
1751-0-1898
1751-0-2822
1751-0-2833
The labels are clamped under the labelling field.
See labelling sheet 1799 xx.
Illumination using neon lamp 8353 or incandescent lamp 8344-1 and LED inserts.
Real metal surface.
1020-0-0031
1) Replacement lamps 8360, 8362, and 8363 and LED inserts.
Blind switch insert 1) 2)
With interlock.
Rated voltage: 250 V~
Rated current: 10 AX
IEC60669-1, British Standard EN 60669-1
SP, switch
2000/4 US-500
1012-0-2197
10/100
01
SP, push switch.
2020/4 US-500
1413-0-1103
10/100
01
1) Only in conjunction with standard flush-mounting boxes according to DIN 49073, Part 1, erect or
Busch-Jaeger No. 3040 wallbox stonework, 3050 wallbox cavity wall or 3060 wallbox concrete)
2) These blind switches/push buttons safely prevent a switch-over of the running direction being carried
out too quickly.
Catalogue 2014/2015 | alpha bs® 33
Rocker Switches
Product
Article-No.
Order-No.
Pack/Qty PG
Product
Rocker
With marking.
As cover for flush mounted blind control switch/push switch.
For inserts 2000/4 and 2020/4 US.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1785 JA-20
1785 JA-21
1785 JA-22G
1785 JA-24
1785 JA-260
1785 JA-266
1751-0-1823
1751-0-1831
1751-0-2581
1751-0-1922
1751-0-2831
1751-0-2842
10
10
10
10
10/100
10/100
04
04
01
01
04
04
1) Real metal surface.
Order-No.
Pack/Qty PG
Cover plate
With marking.
For half-cylindrical type switch.
For insert 2733 USL-101.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1755 SLPZ-20-101
1755 SLPZ-21-101
1755 SLPZ-22G-101
1755 SLPZ-24-101
1755 SLPZ-260-101
1755 SLPZ-266-101
1710-0-1563
1710-0-1571
1710-0-2355
1710-0-1589
1710-0-3304
1710-0-3330
10
10
10
10
10
10
19
19
19
19
19
19
1) Real metal surface.
Key Switch Insert 1) 2) 3)
SP, 1gang 1way switch
For profile semi-cylindrical lock.
In switched-on and switched-off status the key can be
pulled out in the central position, respectively.
Delivered without cylindrical lock.
Rated voltage: 250 V~
Rated current: 10 AX
IEC60669-1, British Standard EN 60669-1
2733 USL-101
1101-0-0914
10
Card switch 10 A 1)
SP, with normally open contact (operating current).
Illuminable.
With N terminal.
Rated voltage: 250 V~
Rated current: 10 A
IEC60669-1, British Standard EN 60669-1
2025 U
19
DIN profile-semi cylindrical lock
Acc. to German Standard DIN 18252.
Total length 40 mm
for blind switches and push switches
For inserts 2712/2713/2722/2723/2733 USL-101 and
2712/2733 SLW-5x.
lock mechanism, with 3 keys
0521 PZ-GS
0470-0-0021
1/100
19
different lock mechanism, with 3 keys
0520 PZ-VS
0470-0-0013
1/100
19
Cover plate
With marking.
As cover for flush-mounted half-cylindrical type blind switch/
push switch.
For inserts 2712/2713 USL-101 and 2722/2723 USL-101.
1755 PZ-20-101
1755 PZ-21-101
1755 PZ-22G-101
1755 PZ-24-101
1755 PZ-260-101
1755 PZ-266-101
1710-0-1498
1710-0-1506
1710-0-2348
1710-0-1514
1710-0-3303
1710-0-3329
10
10
10
10
10
10
19
19
19
19
19
19
1012-0-1713
10
01
1) Only in conjunction with standard flush-mounting boxes according to DIN 49073, Part 1, erect or
Busch-Jaeger No. 3040 wallbox stonework, 3050 wallbox cavity wall or 3060 wallbox concrete)
1) For installation on British Standard wallboxes please use adapter plate APBS (6599-0-2813). (Depth
of box 60 mm.)
2) Use profile semi-cylindrical lock as per drawing. See technical information.
3) See profile semi-cylindrical lock.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
Article-No.
Cover plate
For card switch.
For insert 2025 U.
Suitable for cards sized 54 x 86 mm.
The inner part of the cover plate is made of light-conducting
plastic, so that the card slot is illuminated.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1792-20-101
1792-21-101
1792-22G-101
1792-24-101
1792-260-101
1792-266-101
1710-0-3293
1710-0-3294
1710-0-3295
1710-0-3296
1710-0-3305
1710-0-3331
10
10
10
10
10
10
04
04
01
01
04
04
10/100
01
10/100
01
1) Surface painted.
32 A Double Pole Switch Mechanism
With screw-type terminal
Rated voltage: 250 V~
Rated current: 32 A
BS EN 60669-1, IEC 60669-1
1032/2 UGL
1045-0-0001
45 A Double Pole Switch Mechanism
With screw-type terminal
Rated voltage: 250 V~
Rated current: 45 A
BS EN 60669-1, IEC 60669-1
1045/2 UGL
1045-0-0002
1) Real metal surface.
45 A and 32 A Switch Cover plate
With red neon lens.
for 45 A switch and 32 A switch, 1gang 1way
22 ivory
1746/50-22
24 studio white matt 1746/50-24
34 alpha bs® | Catalogue 2014/2015
1710-0-3036
1710-0-3037
10
10
01
01
Rocker Switches
Product
Article-No.
Order-No.
Pack/Qty PG
Product
Blind switch insert 1) 2)
With rotary knob/switch and push switch.
Rated voltage: 250 V~
Rated current: 10 AX
IEC 60669-1, British Standard EN 60669-1
DP 3)
2712 U
1101-0-0534
10
01
SP, N, E
2713 U
1101-0-0542
10
01
Blind switch insert 1) 2)
With rotary knob/push button.
Rated voltage: 250 V~
Rated current: 10 A
IEC60669-1, British Standard EN 60669-1
6816 U-500
DP 3)
2722 U
1101-0-0559
10
01
SP, N, E
2723 U
1101-0-0567
10
01
10
10
10
10
10
10
04
04
01
01
04
04
1) Surface painted.
Busch-Comfort switch 2-wire insert 1) 2) 3) 4) 5) 6)
2-wire connection (neutral conductor not required)
For Busch-Comfort switch sensors 6815-xxx.
Operation in 1gang 2way installations via push switch-unit
for combination with flush-mounted units.
Operation also possible via conventional push buttons
(2020 US, 2021/6 UK).
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz/60 Hz
Suitable for: 230 V incandescent lamps, 230 V halogen
lamps and low-voltage halogen lamps with conventional
transformers or Busch Electronic Transformer.
Rated power: 40 - 300 W/VA
Temperature range (Device): 0 °C to 35 °C
British Standard EN 60669-2-1
6815 U
1)
2)
3)
4)
5)
6)
6800-0-2270
1/10
6800-0-2621
1/10
19
Busch-Comfort switch control element 1)
With neon lamp.
For 2-wire insert 6815 U.
For relay insert 6816 U.
Adjustable operating mode: semiautomatic mode, automatic switch-on, manual switch-off.
Adjustable operating mode: automatic timer, manual switchon, automatic (timer and motion-controlled) switch-off.
Adjustable operating mode: automatic mode, automatic
(motion-controlled) switch-on and switch-off.
Push switch function possible at all times.
Switch-off delay: 1 to 10 min., adjustable.
Surveillance density: 9 sectors with 28 switching segments.
Detection range: frontal: 5 m, lateral: 3 m
Detection angle: 170 °
Brightness limit value: 0.5 Lux - 300 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
Cover plate
With rotary control, with marking.
As cover for flush mounted blind control switch/push switch.
For inserts 2712 U, 2713 U and 2722 U, 2723 U.
1753-0-1092
1753-0-1175
1710-0-2330
1753-0-1555
1710-0-3302
1710-0-3328
Pack/Qty PG
1) In case of electronic transformers, 5 % transformer losses.
2) In the case of conventional transformers, take ~20% transformer loss into account.
3) Output can be connected in parallel.
1) Only in conjunction with standard flush-mounting boxes according to DIN 49073, Part 1, erect or
Busch-Jaeger No. 3040 wallbox stonework, 3050 wallbox cavity wall or 3060 wallbox concrete)
2) Blind switches/push switches prevents fast change over between operating directions.
3) Also suitable for controlling direct voltage drives.
1740 DR-20
1740 DR-21
1740 DR-22G
1740 DR-24
1740 DR-260
1740 DR-266
Order-No.
Busch-Comfort switch relay mechanism 1) 2) 3)
3 wire connection (neutral conductor required).
For Busch-Comfort switch sensors 6815-xxx.
Operation in 1gang 2way installations via push switch-unit
for combination with flush-mounted units.
Operation also possible via conventional push buttons
(2020 US, 2021/6 UK).
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz/60 Hz
Suitable for: 230 V incandescent lamps and low-voltage
halogen lamps with conventional transformers or electronic
transformer.
Rated power: 2300 W/VA
Suitable for: 230 V halogen lamps
Rated power: 1200 W
Suitable for: Fluorescent lamps
Rated current: 10 AX, cos φ 0.5
Rated power: 2300 VA
Temperature range (Device): 0 °C to 35 °C
British Standard EN 60669-2-1
1) Only in conjunction with standard flush-mounting boxes according to DIN 49073, Part 1, erect or
Busch-Jaeger No. 3040 wallbox stonework, 3050 wallbox cavity wall or 3060 wallbox concrete)
2) Blind switches/push switches prevents fast change over between operating directions.
3) Also suitable for controlling direct voltage drives.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
Article-No.
20 platinum 2)
21 bronze 2)
22G ivory
24 studio white matt
260 palladium 2)
266 titanium 2)
6815-20
6815-21
6815-22G
6815-24
6815-260
6815-266
6800-0-2273
6800-0-2274
6800-0-2275
6800-0-2276
6800-0-2282
6800-0-2283
1/10
1/10
1/10
1/10
1/10
1/10
19
19
19
19
19
19
1) Please order the respective flush mounted insert separately.
2) Surface painted.
19
In case of electronic transformers, 5 % transformer losses.
In the case of conventional transformers, take ~20% transformer loss into account.
Cannot be connected to compact fluorescent lamps, ECG or CCG.
Not suitable for activating the staircase time delay.
Cannot be used to control relais.
Output cannot be connected in parallel.
Technical information
www.BUSCH-JAEGER-catalogue.com
Catalogue 2014/2015 | alpha bs® 35
alpha bs®
Socket Outlets
Product
Article-No.
Order-No.
Pack/Qty PG
Product
13 A Switched socket outlet
With neon lamp.
DP switched
1gang
Rated voltage: 250 V~
Rated current: 13 A
BS 1363: part2
22 ivory
24 studio white
2190 EUCGL/2-22
2190 EUCGL/2-24
2190-0-0032
2190-0-0033
2190-02 EUC/2-22
2190-02 EUC/2-24
2190-0-0153
2190-0-0154
10/100
10/100
01
01
2190-02EUCGL/2-22 2190-0-0161
2190-02EUCGL/2-24 2190-0-0162
10
5/50
3016 EUC-24G
2122-0-0028
10/50
5
01
01
10
01
10/100
10
01
01
15 A Switched socket outlet
With neon lamp.
DP switched
1gang
Rated voltage: 250 V~
Rated current: 15 A
BS 546
2191-0-0022
2191-0-0023
Socket outlet
With earthing pin
With screwless terminals.
Suitable for the countries like Poland, Czech Republic.
DP (2 P + E)
Rated voltage: 250 V~
Rated current: 16 A
20 platinum
21 bronze
22G ivory
24G studio white
20 MUC-20-500
20 MUC-21-500
20 MUC-22G-500
20 MUC-24G-500
36 alpha bs® | Catalogue 2014/2015
2017-0-0808
2017-0-0811
2017-0-0813
2017-0-0815
20 MUCKS-20-500
20 MUCKS-21-500
20 MUCKS-22G-500
20 MUCKS-24G-500
2017-0-0832
2017-0-0835
2017-0-0802
2017-0-0803
10
10
10
10
01
01
01
01
Socket outlet
With earthing pin
With screwless terminals.
Used to avoid connection of unwanted equipment which
may cause interference on the circuit.
DP (2 P + E)
Rated voltage: 250 V~
Rated current: 16 A
20 platinum
22G ivory
24G studio white
1) Use in accordance with US Standard (e.g. in US military barracks).
22 ivory
2191 EUCGL/2-22
24 studio white matt 2191 EUCGL/2-24
20 platinum
21 bronze
22G ivory
24G studio white
01
01
Busch-Nema socket outlet with cover plate 1)
DP (2 P + E), 20 A
For wall box 58 mm with screw fixation.
Without claws.
Rated voltage: 125 V~
Rated current: 20 A
24G studio white
Pack/Qty PG
1) Socket outlet with integrated child protection. Replaces the usual term”...with child protection”.
2) Order-bound manufacturing
13 A double socket outlet
With neon lamp.
SP switched
two earth terminals
2gang
Rated voltage: 250 V~
BS 1363: part2
22 ivory
24 studio white
Order-No.
Socket outlet 1) 2)
With earthing pin
With screwless terminals.
Shuttered.
Suitable for the countries like Poland, Czech Republic.
DP (2 P + E)
Rated voltage: 250 V~
Rated current: 16 A
13 A double socket outlet
2-pole connection
two earth terminals
2gang
Rated voltage: 250 V~
Rated current: 13 A
BS 1363: part2
22 ivory
24 studio white
Article-No.
10/100
10
10
10
01
01
01
01
20 MUCC-20-500
20 MUCC-22G-500
20 MUCC-24G-500
2017-0-0825
2017-0-0828
2017-0-0829
10
10
10
01
01
01
alpha bs®
Special Devices
Product
Article-No.
alpha bs®
Telephone/Radio/TV
Data communication
Order-No.
Pack/Qty PG
Product
Light signal insert for push lamp
Without cover.
Rated voltage: 250 V~
for push-in lampnot included 1)
2061 U
1511-0-0062
10
01
for lamp with E-10 thread
with E 10-thread
2661 U
1511-0-0096
10
01
Cover plate 1)
For indication lamp
For insert 2061/2661 U.
As cover for flush-mounted light signal.
1756-20
1756-21
1756-22G
1756-24
1756-260
1756-266
1753-0-1506
1753-0-1522
1710-0-2413
1753-0-1548
1710-0-3306
1710-0-3332
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1742-20
1742-21
1742-22G
1742-24
1742-260
1742-266
1753-0-1118
1753-0-1431
1710-0-2389
1753-0-1571
1710-0-3309
1710-0-3335
10
10
10/100
10
10
10
04
04
01
01
04
04
Cover plate 1)
With metal mounting plate.
As cover for flex outlet, for cords up to 10.3 mm diameter.
With strain relief (without terminal block).
10
10
10
10
10
10
04
04
01
01
04
04
20 platinum 2)
21 bronze 2)
22G ivory
24 studio white matt
260 palladium 2)
266 titanium 2)
1749-20
1749-21
1749-22G
1749-24
1749-260
1749-266
1710-0-0904
1710-0-0946
1710-0-2561
1710-0-0979
1710-0-3316
1710-0-3342
10
10
10
10
10
10
04
04
01
01
04
04
1) Cover plate can also be used individually as cover for telephone connector boxes (VDo).
2) Real metal surface.
Cap
Cap for light signal.
As cover for flush-mounted light signal.
For insert 2061/2661 U.
1565-0-0134
1565-0-0142
1565-0-0159
Pack/Qty PG
1) Real metal surface.
1) Transparent cap 1557-1x required.
2) Real metal surface.
11 clear-transparent 1557-11
12 red
1557-12
13 green
1557-13
Order-No.
Blank plate
With metal mounting plate.
1) Illuminable by using lamp insert 8302, 8340, 8341, 8342, 8343. For a more intensive illumination we
recommend the lamp 8340.
20 platinum 2)
21 bronze 2)
22G ivory
24 studio white matt
260 palladium 2)
266 titanium 2)
Article-No.
10
10
10
01
01
01
Universal data connection unit, cat. 3 1)
1gang
With down-leading outlet.
For 8-pole plug, RJ 11/12, RJ 45, ISDN capability, Cat. 3.
Design according to IEC 60 603-7-2:2007.
Screw contacts
With claw.
0213-500
0230-0-1549
10/100
01
1) Suitable for cover plate 1803-xxx.
Universal data connection unit, RJ45, Cat. 5e, unshielded, with down-leading outlet 1)
1gang
With down-leading outlet and LSA self-cutting clamps.
Cat. 5 in accordance with DIN EN 50173-1:2003-06.
Cat. 5e (Category 5 enhanced) according to TIA/EIA568-B.2-2001.
Marking in accordance with EIA/TIA 568 A and B.
Design according to IEC 60 603-7-2:2007.
Up to 100 MHz on all pairs of wires.
Suitable for Gigabit Ethernet.
With claw.
0220-507
0230-0-0397
10
01
1) Suitable for cover plate 1803-xxx.
Technical information
www.BUSCH-JAEGER-catalogue.com
Catalogue 2014/2015 | alpha bs® 37
alpha bs®
Telephone/Radio/TV
Data communication
Product
Article-No.
Order-No.
Pack/Qty PG
Data-connection box, RJ45, cat.5e, shielded 1) *)
1gang
With down-leading outlet and LSA self-cutting clamps.
Cat. 5 in accordance with DIN EN 50173-1:2011-09.
Cat. 5e (Category 5 enhanced) according to TIA/EIA568-B.2-2001.
Marking in accordance with EIA/TIA 568 A and B.
According to EN 60 603-7-3:2010-06.
Shielding according to DIN EN 55022, Class B.
Up to 100 MHz on all pairs of wires.
Suitable for Gigabit Ethernet.
Suitable for PoE+ according to IEEE 802.3at, >- 2.500 contact durability.
Flex cable entries from all sides without buckles.
Earthing of housing via 6,3 mm blade terminal at the back
possible.
Suitable for Mix-and-Match operation.
Suitable for RJ 11, RJ 12 und RJ 45.
Clearly colour-coded connection identification.
For data cables with a diameter of 6 -10 mm.
For wires of AWG 24-22.
For trunk systems, flush-mounted wall boxes and underfloor
systems.
Without claws.
Mounting depth: 31 mm.
metal clad
0216
0230-0-0276
1/10
Product
0215
0220/12-507
0230-0-0399
10
1753-0-8410
1753-0-8428
1710-0-2603
1753-0-8436
1710-0-3322
1710-0-3348
10
10
10
10
10
10
04
04
01
01
04
04
Universal data connection box with down-leading outlet 1)
2gang internally parallel connected
With down-leading outlet.
For 8-pole plug, RJ 11/12, RJ 45, ISDN capability, Cat. 3.
Design according to IEC 60 603-7-2:2007.
Screw contacts
With claw.
1) Suitable for cover plate 1803-02-xxx.
38 alpha bs® | Catalogue 2014/2015
01
0230-0-0398
10
01
Data-connection box, RJ45, cat.5e, shielded 1) *)
2 x outlets, 8/8-pole
With down-leading outlet and LSA self-cutting clamps.
Cat. 5 in accordance with DIN EN 50173-1:2011-09.
Cat. 5e (Category 5 enhanced) according to TIA/EIA568-B.2-2001.
Marking in accordance with EIA/TIA 568 A and B.
According to EN 60 603-7-3:2010-06.
Shielding according to DIN EN 55022, Class B.
Up to 100 MHz on all pairs of wires.
Suitable for Gigabit Ethernet.
Suitable for PoE+ according to IEEE 802.3at, >- 2.500 contact durability.
Flex cable entries from all sides without buckles.
Earthing of housing via 6,3 mm blade terminal at the back
possible.
Suitable for Mix-and-Match operation.
Suitable for RJ 11, RJ 12 und RJ 45.
Clearly colour-coded connection identification.
For data cables with a diameter of 6 -10 mm.
For wires of AWG 24-22.
For trunk systems, flush-mounted wall boxes and underfloor
systems.
Without claws.
Mounting depth: 31 mm.
01
1) Surface painted.
0214
10
1) Suitable for cover plate 1803-02-xxx.
Cover plate
With down-leading outlet.
As cover for universal data connection boxes.
Art.-No. 0213 (Cat 3/ISDN), 0216-101, 0218/11-101 (Cat
5e/6 data technology) and comparable types of the company Rutenbeck.
1803-20
1803-21
1803-22G
1803-24
1803-260
1803-266
0230-0-0243
Universal data connection unit, RJ45, Cat. 5e, unshielded, with down-leading outlet 1)
2 x outlets, 8/8-pole
With down-leading outlet and LSA self-cutting clamps.
Cat. 5 in accordance with DIN EN 50173-1:2003-06.
Cat. 5e (Category 5 enhanced) according to TIA/EIA568-B.2-2001.
Marking in accordance with EIA/TIA 568 A and B.
Design according to IEC 60 603-7-2:2007.
Up to 100 MHz on all pairs of wires.
Suitable for Gigabit Ethernet.
With claw.
1) Suitable for cover plate 1803-xxx.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
Pack/Qty PG
1) Suitable for cover plate 1803-02-xxx.
Universal data connection unit, RJ45, Cat. 6e, unshielded, with down-leading outlet 1)
1gang
With down-leading outlet and LSA self-cutting clamps.
Cat. 6 according to DIN EN 50173-1:2003-06, ISO/IEC
1180:2002, and TIA/EIA-568-B.2:2002.
Cat. 6a (Category 6 augmented) in accordance with TIA/
EIA-568-B.2-10 Draft 8.0.
Marking in accordance with EIA/TIA 568 A and B.
Design according to IEC 60 603-7-2:2007.
Up to 250 MHz on all pairs of wires.
Suitable for Gigabit Ethernet.
With claw.
0221-507
Order-No.
Universal data connection box with down-leading outlet 1)
2 x outlets, 8/8-pole
With down-leading outlet.
For 8-pole plug, RJ 11/12, RJ 45, ISDN capability, Cat. 3.
Design according to IEC 60 603-7-2:2007.
Screw contacts
With claw.
01
1) Suitable for cover plate 1803-xxx.
*) Phase-out type
Article-No.
0230-0-0235
10/100
01
metal clad
0217
1) Suitable for cover plate 1803-02-xxx.
*) Phase-out type
0230-0-0284
10
01
alpha bs®
Telephone/Radio/TV
Data communication
Product
Article-No.
Order-No.
Pack/Qty PG
Universal data connection unit, RJ45, Cat. 6e, unshielded, with down-leading outlet 1)
2 x outlets, 8/8-pole
With down-leading outlet and LSA self-cutting clamps.
Cat. 6 according to DIN EN 50173-1:2003-06, ISO/IEC
1180:2002, and TIA/EIA-568-B.2:2002.
Cat. 6a (Category 6 augmented ) in accordance with TIA/
EIA-TR 42.7.
Marking in accordance with EIA/TIA 568 A and B.
Design according to IEC 60 603-7-2:2007.
Up to 250 MHz on all pairs of wires.
Suitable for 10-Gigabit Ethernet.
With claw.
0221/12-507
0230-0-0400
10
01
Product
0222-507
0230-0-0401
10
01
Cover plate
2gang
With down-leading outlet.
As cover for universal data connection boxes.
Art. No. 0214, 0215 (Cat 3/ISDN), 0217(Cat 5e/6 data
technology), 0220/12-507, 0221/12-507 and comparable
types of the Company Rutenbeck, BTR (E-Datdesign), AMP
(NETCONNECT 5E).
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1803-02-20
1803-02-21
1803-02-22G
1803-02-24
1803-02-260
1803-02-266
1753-0-8485
1753-0-8493
1710-0-2611
1753-0-8501
1710-0-3321
1710-0-3347
10
10
10
10
10/100
10/100
04
04
01
01
04
04
1) Surface painted.
Cover plate
With metal mounting plate.
For 1 modular jack.
Suitable for Art. Nos. 0210, 0211 and 0219-101.
Without claws.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
2561-20
2561-21
2561-22G
2561-24
2561-260
2561-266
1) Surface painted.
1753-0-3916
1753-0-3924
1710-0-2504
1753-0-3932
1710-0-3314
1710-0-3340
10
10
10
10
10
10
Order-No.
Pack/Qty PG
Cover plate
With metal mounting plate.
For 2 modular jack inserts.
Suitable for Art. No. 0210 and 0211.
Without claws.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
2561-02-20
2561-02-21
2561-02-22G
2561-02-24
2561-02-260
2561-02-266
1753-0-4047
1753-0-4054
1710-0-2512
1753-0-4062
1710-0-3315
1710-0-3341
10
10
10
10
10
10
04
04
01
01
04
04
1) Surface painted.
Cover plate
For telecommunication.
With cover plate 50 x 50 mm, AMP, Brand-Rex, Rutenbeck,
BTR, Telegärtner, etc.
1) Suitable for cover plate 1803-02-xxx.
Strain relief adapter
For flush-mounted installation.
with strain relief and cable guide
With two cable binders.
Suitable for all Universal data connecting unit sockets, part
no.s 0220... and 0221...
Article-No.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1746/10-20
1746/10-21
1746/10-22G
1746/10-24
1746/10-260
1746/10-266
1753-0-8550
1753-0-8568
1710-0-2652
1753-0-8576
1710-0-3312
1710-0-3338
10
10
10
10
10
10
04
04
01
01
04
04
1) Surface painted.
Cover plate
With hinged lid.
For telecommunication.
With cover plate 50 x 50 mm, AMP, Brand-Rex, Rutenbeck,
BTR, Telegärtner, etc.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1746-20-101
1746-21-101
1746-22G-101
1746-24-101
1746-260-101
1746-266-101
1753-0-5978
1753-0-5986
1710-0-2470
1753-0-5994
1710-0-3313
1710-0-3339
10
10
10
10
10
10
04
04
01
01
04
04
10
10
10
10
10
04
04
01
04
04
1) Real metal surface.
Cover plate 1)
With metal mounting plate.
for communication devices.
with labelling field 53.7 x 11.7 mm.
Without claws.
04
04
01
01
04
04
20
21
24
260
266
platinum 2)
bronze 2)
studio white matt
palladium 2)
titanium 2)
1758-20
1758-21
1758-24
1758-260
1758-266
1724-0-1010
1724-0-1028
1724-0-1036
1724-0-2793
1724-0-2798
1) Labelling sheets 1799,1799 02,1799 19 and labelling software.
2) Surface painted.
Technical information
www.BUSCH-JAEGER-catalogue.com
Catalogue 2014/2015 | alpha bs® 39
alpha bs®
Room Thermostats
Product
Article-No.
Order-No.
Pack/Qty PG
Product
Cover plate
For room thermostat.
For room thermostats 1094 U/UF, 1097 U/UF.
Article-No.
Order-No.
Pack/Qty PG
Cover plate
For room thermostat.
For room temperature controller 1099 UHK.
alpha
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1794-20
1794-21
1794-22G
1794-24
1794-260
1794-266
1710-0-3532
1710-0-3533
1710-0-3534
1710-0-3535
1710-0-3541
1710-0-3542
10
10
10
10
10
10
19
19
19
19
19
19
1) Surface painted.
Cover plate
For room thermostat.
With sliding switch for nightly room temperature reduction.
to activate nighttime mode and reduction of room temperature by 4K, for thermostats 1095 U, 1096 U and 1095 UF.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1795-20
1795-21
1795-22G
1795-24
1795-260
1795-266
1710-0-3557
1710-0-3558
1710-0-3559
1710-0-3560
1710-0-3566
1710-0-3567
10
10
10
10
10
10
19
19
19
19
19
19
1) Surface painted.
Cover plate
For room thermostat.
For room thermostats 1094 UTA, 1097 UTA.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
24G studio white
260 palladium 1)
266 titanium 1)
1794 TA-20
1794 TA-21
1794 TA-22G
1794 TA-24
1794 TA-24G
1794 TA-260
1794 TA-266
1710-0-3684
1710-0-3685
1710-0-3686
1710-0-3687
1710-0-3688
1710-0-3693
1710-0-3694
10
10
10
10
10
10
10
19
19
19
19
19
19
19
Cover plate
For room thermostat.
With sliding switch for nightly room temperature reduction.
For room thermostats 1095 UTA, 1096 UTA.
1795 TA-20
1795 TA-21
1795 TA-22G
1795 TA-24
1795 TA-24G
1795 TA-260
1795 TA-266
1) Surface painted.
40 alpha bs® | Catalogue 2014/2015
1710-0-3711
1710-0-3712
1710-0-3713
1710-0-3714
1710-0-3715
1710-0-3720
1710-0-3721
10
10
10
10
10
10
10
19
19
19
19
19
19
19
1795 HK-20
1795 HK-21
1795 HK-22G
1795 HK-24
1795 HK-24G
1795 HK-260
1795 HK-266
1710-0-3998
1710-0-3999
1710-0-4000
1710-0-4001
1710-0-4002
1710-0-4003
1710-0-4004
10
10
10
10
10
10
10
19
19
19
19
19
19
19
1) Surface painted.
Cover plate
for room thermostat
For room temperature controller 1099 UHKEA.
With sliding switch for switchover between cooling or heating.
alpha
20 platinum 1)
21 bronze 1)
22G ivory
24G studio white
24 studio white matt
260 palladium 1)
266 titanium 1)
1) Surface painted.
1) Surface painted.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
24G studio white
260 palladium 1)
266 titanium 1)
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
24G studio white
260 palladium 1)
266 titanium 1)
1795 HKEA-20
1795 HKEA-21
1795 HKEA-22G
1795 HKEA-24G
1795 HKEA-24
1795 HKEA-260
1795 HKEA-266
1710-0-4030
1710-0-4031
1710-0-4032
1710-0-4034
1710-0-4033
1710-0-4035
1710-0-4036
10
10
10
10
10
10
10
19
19
19
19
19
19
19
alpha bs®
Busch-Dimmer®
Product
Article-No.
alpha bs®
Busch-Watchdog
Order-No.
Pack/Qty PG
Product
Cover plate 1)
With rotary knob, with indication lamp.
For Busch-Dimmer®.
For inserts 2112 U-101/2117 U/2117/11 U/2247 U/
2250 U/6513 U-102/6517 U-101/6519 U/6520 U/6523 U/
6591 U-101 and 6592 U.
20 platinum 2)
21 bronze 2)
22G ivory
24 studio white matt
260 palladium 2)
266 titanium 2)
6540-20
6540-21
6540-22G
6540-24
6540-260
6540-266
6599-0-1458
6599-0-1490
6599-0-2803
6599-0-1540
6599-0-2852
6599-0-2855
10
10
10
10
10/100
10
1) Replacement neon lamp 3856.
2) Real metal surface.
20 platinum 4)
21 bronze 4)
22G ivory
24 studio white matt
260 palladium 4)
266 titanium 4)
1)
2)
3)
4)
6543-20-102
6543-21-102
6543-22G-102
6543-24-102
6543-260-102
6543-266-102
6599-0-2820
6599-0-2821
6599-0-2822
6599-0-2823
6599-0-2869
6599-0-2870
1/10
1/10
1/10
1/10
1/10
1/10
19
19
19
19
19
19
20 platinum 2)
21 bronze 2)
22G ivory
24 studio white matt
260 palladium 2)
266 titanium 2)
6020-0-1316
6020-0-1317
6020-0-1318
6020-0-1371
6020-0-1365
6020-0-1366
10
1/10
1/10
1
1/10
1/10
19
19
19
19
19
19
1) Touch-type Controller 6550 U-101 non-illuminable
2) Surface painted.
Control element 1)
With neon lamp.
Combinable with Busch-Memory 2gang dimmer 6565 U.
20 platinum 2)
21 bronze 2)
22G ivory
24 studio white matt
260 palladium 2)
266 titanium 2)
6545-20
6545-21
6545-22G
6545-24
6545-260
6545-266
6599-0-2890
6599-0-2891
6599-0-2892
6599-0-2893
6599-0-2899
6599-0-2900
1/10
1/10
1/10
1/10
1/10
1/10
19
19
19
19
19
19
1
1
1
1
1/10
1/10
19
19
19
19
19
19
Busch-Watchdog 180 flush-mounted comfort
sensor II 1) 2)
With multi-lens.
For automatic switching of devices dependent on motion
and brightness.
For down-to-ground detection.
For relay inserts 6401 U-102, 6402 U and 6812 U-101.
For MOS-Fet insert 6804 U-101.
For Dimmer insert 6593 U.
For extension insert 6805 U.
With integrated selector switch for ON-AUTOMATIC-OFF
(lockable).
Soft phase-out: In combination with the 6593 U (mode of
operation: Soft OFF) the illumination is dimmed down within
60 sec and switched off.
Surveillance density: 28 sectors with 112 switching segments.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Detection range: frontal: 15 m, lateral: 5 m, Mounting height:
2.5 m
Detection range 2: frontal: 10 m, lateral: 2.5 m, Mounting
height: 1.2 m
Detection angle: 180 °
Brightness limit value: 5 Lux Up to daytime operation
Mounting height: 0.8 m - 1.2 m alternative: 2.5 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
IR control element 1)
With marking, illuminated.
For LED-Dimmer insert 6524 U.
For Busch-Universal master dimmer insert 6593 U.
For Busch-Blind control II insert 6411 U-101,
6411 U/S-101.
For Busch-Universal 2gang 1way insert 6402 U.
for Busch-Universal touch-type controller 6550 U-101
Manual operation on-site and remote control via IR
remote control (6010-25) or wall-mounted transmitter
(6020-xx/6021-xx) possible.
6066-20-102
6066-21-102
6066-22G-102
6066-24-102-500
6066-260-102
6066-266-102
6800-0-2068
6800-0-2069
6800-0-2070
6800-0-2168
6800-0-2118
6800-0-2120
6800-20-104
6800-21-104
6800-22G-104
6800-24-104-500
6800-260-104
6800-266-104
1) Please order the respective flush mounted insert separately.
2) Surface painted.
Compatible with previous type 6543-xxx.
Touch-type Controller 6550 U-xxx non-illuminable.
Replacement neon lamp 3857.
Real metal surface.
20 platinum 2)
21 bronze 2)
22G ivory
24 studio white matt
260 palladium 2)
266 titanium 2)
Pack/Qty PG
Busch-Watchdog 180 flush-mounted comfort sensor II 1)
With select-lens.
For automatic switching of devices dependent on motion
and brightness.
For relay inserts 6401 U-102, 6402 U and 6812 U-101.
For MOS-Fet insert 6804 U-101.
For Dimmer insert 6593 U.
For extension insert 6805 U.
With integrated selector switch for ON-AUTOMATIC-OFF
(lockable).
Soft phase-out: In combination with the 6593 U (mode of
operation: Soft OFF) the illumination is dimmed down within
60 sec and switched off.
Surveillance density: 18 sectors with 72 switching segments.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Detection range: frontal: 12 m, lateral: 8 m
Detection angle: 180 °
Brightness limit value: 5 Lux Up to daytime operation
Mounting height: 0.8 m - 1.2 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
19
19
19
19
19
19
Control element 1) 2) 3)
With neon lamp.
Combinable with LED dimmer 6524 U, Busch-Universal
touch-type controller 6550 U-10x, Busch-Memory touchdimmer 6560 U-101, Busch-Universal-Dimmer® 6593 U,
Busch-Universal relay insert 6401 U-10x, Busch-Universal
series insert 6402 U.
Order-No.
Article-No.
20 platinum 3)
21 bronze 3)
22G ivory
24 studio white matt
260 palladium 3)
266 titanium 3)
6800-20-104M
6800-21-104M
6800-22G-104M
6800-24-104M-500
6800-260-104M
6800-266-104M
6800-0-2084
6800-0-2085
6800-0-2086
6800-0-2169
6800-0-2119
6800-0-2121
1
1
1
1
1/10
1/10
19
19
19
19
19
19
1) installation: slide switch top.
2) Please order the respective flush mounted insert separately.
3) Surface painted.
1) Replacement neon lamp 3857.
2) Real metal surface.
Technical information
www.BUSCH-JAEGER-catalogue.com
Catalogue 2014/2015 | alpha bs® 41
alpha bs®
Busch-Timer®
Product
Article-No.
Order-No.
alpha bs®
Busch-Blind control
Pack/Qty PG
Product
Cover plate
With rotary control, with marking.
For Busch-Timer insert 1070 U.
Running time: 15 min
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
1770-20-101
1770-21-101
1770-22G-101
1770-24-101
1753-0-6075
1753-0-6083
1710-0-2397
1753-0-6091
10
10
10
10
19
19
19
19
1753-0-6224
1753-0-6232
1710-0-2405
1753-0-6240
Pack/Qty PG
20 platinum 2)
21 bronze 2)
22G ivory
24 studio white matt
260 palladium 2)
266 titanium 2)
6430-20-101
6430-21-101
6430-22G-101
6430-24-101
6430-260-101
6430-266-101
6430-0-0256
6430-0-0257
6430-0-0258
6430-0-0259
6430-0-0279
6430-0-0280
1
1
1
1
1
1
19
19
19
19
19
19
1) Replacement neon lamp 3857.
2) Real metal surface.
Cover plate
With rotary control, with marking.
For Busch-Timer insert 1071 U.
Running time: 120 min
1771-20-101
1771-21-101
1771-22G-101
1771-24-101
Order-No.
Control element 1)
With neon lamp.
For Busch-Blind control II 6411 U, 6411 U/S and
Busch-Universal 2gang 1way insert 6402 U.
1) Surface painted.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
Article-No.
10
10
10
10
IR control element 1)
With marking, illuminated.
For LED-Dimmer insert 6524 U.
For Busch-Universal master dimmer insert 6593 U.
For Busch-Blind control II insert 6411 U-101,
6411 U/S-101.
For Busch-Universal 2gang 1way insert 6402 U.
for Busch-Universal touch-type controller 6550 U-101
Manual operation on-site and remote control via IR
remote control (6010-25) or wall-mounted transmitter
(6020-xx/6021-xx) possible.
19
19
19
19
1) Surface painted.
20 platinum 2)
21 bronze 2)
22G ivory
24 studio white matt
260 palladium 2)
266 titanium 2)
Cover plate
For Busch-Timer® III insert 6454 U-101.
For Busch-Timer® control cover 6412-101.
6066-20-102
6066-21-102
6066-22G-102
6066-24-102-500
6066-260-102
6066-266-102
6020-0-1316
6020-0-1317
6020-0-1318
6020-0-1371
6020-0-1365
6020-0-1366
10
1/10
1/10
1
1/10
1/10
19
19
19
19
19
19
10
10
1
10
10
10
19
19
19
19
19
19
1) Touch-type Controller 6550 U-101 non-illuminable
2) Surface painted.
20 platinum )
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1
1772-20-101
1772-21-101
1772-22G-101
1772-24-101
1772-260-101
1772-266-101
1710-0-3479
1710-0-3480
1710-0-3473
1710-0-3481
1710-0-3477
1710-0-3478
10
10
1
10
10
10
19
19
19
19
19
19
Cover plate
For Busch-Timer® III insert 6454 U-101.
For Busch-Timer® control cover 6412-101.
1) Surface painted.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
1) Surface painted.
42 alpha bs® | Catalogue 2014/2015
1772-20-101
1772-21-101
1772-22G-101
1772-24-101
1772-260-101
1772-266-101
1710-0-3479
1710-0-3480
1710-0-3473
1710-0-3481
1710-0-3477
1710-0-3478
alpha bs®
Busch-Remote control IR
Product
Article-No.
Order-No.
Pack/Qty PG
IR remote control
Battery-supplied infrared remote control.
For IR receiver (60xx).
For KNX presence detectors and KNX sensors with infrared
interface.
For switching/dimming up to 10 loads in 2 groups (1-5 /
6-10).
Programming and selection of 2 MEMO memories possible
per group.
Supply from 4 alkaline manganese batteries, IEC LR03
(microcell). Not included in delivery.
Range: 15 m
Rated voltage: 6 V6010-25-500
6020-0-1133
1
19
IR wall-mounted transmitter 1) 2)
Battery-supplied infrared remote control.
For IR receiver and KNX flush-mounted IR interfaces (selection of 2 memo functions for each address group and ALL
OFF).
Address group switch-over (1-5/6-10)
Supply: 6 V Flat-Pack battery (e.g. Duracell 7 K 67, not
included in delivery)
Range: 15 m
20 platinum 3)
21 bronze 3)
24 studio white matt
24G studio white
6020-20
6020-21
6020-24-500
6020-24G-500
6020-0-0036
6020-0-0044
6020-0-1281
6020-0-1299
1/10
1/10
1
1
19
19
19
19
1) For programming the memory M1 and M2 the IR Mobile Remote Control 6010-xx is required.
2) For function together with KNX flush-mounted, infrared interface, see Technical Manual.
3) Surface painted.
Product
Article-No.
20 platinum 2)
21 bronze 2)
24 studio white matt
24G studio white
6021-20
6021-21
6021-24-500
6021-24G-500
6020-0-0754
6020-0-0762
6020-0-1315
6020-0-1307
1
1
1
1
Pack/Qty PG
IR Receiver, 4-channel
4 x 350 VA
for luminaires
For switching 4 consumers
2 supplementary inputs via 127 V push switch (e.g.
2020 US), central disablement of all outputs possible, supplementary IR remote control is possible via IR flying receiver
6045 E-101
switching capacity: 4 x 690 W or 4 x 350 VA temperature
range: 0° C - 35° C
Rated voltage: 127 VRated frequency: 60 Hz
6056 EB-127-500
6020-0-1352
1
19
IR receiver 1)
4gang
For switching 4 consumers
Operation also possible via 2 conventional push buttons
(2020 US/2021/6 US).
Central disablement of all outputs possible.
Additional IR remote control via IR flying receiver
6045 E-101 possible.
Control via IR mobile remote control/wall-mounted transmitter 6010-25 and 6020/21-xxx
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz
Outputs: 4x Normally open contact, potential-bound
Rated current: 6 A, cos φ 1
Rated current: 3 A, cos φ 0.5
Temperature range (Device): 0 °C to 35 °C
6056 EB-500
IR wall-mounted transmitter 1)
1-channel
Battery-supplied infrared remote control.
For IR reception and KNX flush-mounted IR interface
(switching and dimming an IR address possible. ALL OFF
function for respective address group.).
Range: 15 m
Supply: 6 V Flat-Pack battery (e.g. Duracell 7 K 67, not
included in delivery)
Order-No.
6020-0-1232
1
19
1) Push-switch operation possible via additional wire bridge.
19
19
19
19
1) For function together with KNX flush-mounted, infrared interface, see Technical Manual.
2) Surface painted.
IR control element
With marking, illuminated.
For Busch-Universal relay switch insert 6401 U-10x and
Busch-Universal 2gang 1way insert 6402 U.
Manual operation on-site and remote control via IR
remote control (6010-25) or wall-mounted transmitter
(6020-xx/6021-xx) possible.
20 platinum 1)
21 bronze 1)
22G ivory
24 studio white matt
260 palladium 1)
266 titanium 1)
6067-20-102
6067-21-102
6067-22G-102
6067-24-102-500
6067-260-102
6067-266-102
6020-0-1324
6020-0-1325
6020-0-1326
6020-0-1373
6020-0-1369
6020-0-1370
10
10
10
1
1/10
1/10
19
19
19
19
19
19
1) Surface painted.
Technical information
www.BUSCH-JAEGER-catalogue.com
Catalogue 2014/2015 | alpha bs® 43
alpha bs®
Accessories
Product
Article-No.
alpha bs®
Cover Frames
Order-No.
Pack/Qty PG
Product
Mounting Clips
For 2gang product combinations into a standard 2gang BS
box.
MCBS
1012-0-2068
1/20
6599-0-2813
10/100
1741-0-0067
4
44 alpha bs® | Catalogue 2014/2015
1741-0-0068
4
22G ivory
24G studio white
01
01
1721 BS-22G
1721 BS-24G
1754-0-4070
1754-0-4071
10/100
10/100
01
01
Cover frame
2gang, horizontal
to cover 2gang product combinations which are installed
into a standard BS 2gang wall box.
delivered together with 2 mounting clips for 2gang product
combination
22G ivory
24G studio white
Flush-mounting cavity wall box, 2gang
For shaver socket outlet 2332 UJBS-8xx.
Dimensions: (L x W x D): 142 mm x 82 mm x 45 mm
3031
Pack/Qty PG
Cover frame
1gang
19
Flush-mounting wall box, 2gang
For shaver socket outlet 2332 UJBS-8xx.
Dimensions: (L x W x D): 135 mm x 75 mm x 47 mm
3030
Order-No.
01
Adapter Plate
for adaption of BJE products with German type mounting
plates to British wall boxes (1gang boxes and 2gang Boxes)
APBS
Article-No.
1722 BS-22G
1722 BS-24G
1754-0-4075
1754-0-4076
10/100
10/150
01
01
Notes
Technical information
www.BUSCH-JAEGER-catalogue.com
Catalogue 2014/2015 | alpha bs® 45
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising