Compaq | Compaq Presario,Presario 943 | Specifications | Compaq Compaq Presario,Presario 943 Specifications

Compaq Compaq Presario,Presario 943 Specifications
325388-002.book Page i Friday, October 24, 2003 9:21 AM
Maintenance and Service
Guide
HP Pavilion Widescreen
Notebook zt3000
HP Compaq Business Notebook nx7000
Compaq Presario Widescreen
Notebook PC X1000
Document Part Number: 325388-002
October 2003
This guide is a troubleshooting reference used for maintaining
and servicing the notebook. It provides comprehensive
information on identifying notebook features, components, and
spare parts, troubleshooting notebook problems, and performing
notebook disassembly procedures.
325388-002.book Page ii Friday, October 24, 2003 9:21 AM
© 2003 Hewlett-Packard Development Company, L.P.
Microsoft® and Windows® are U.S. registered trademarks of Microsoft
Corporation. Intel®, Pentium®, and SpeedStep® are trademarks or
registered trademarks of Intel Corporation or its subsidiaries in the United
States and other countries. SD Logo is a trademark of its proprietor.
Bluetooth® is a trademark owned by its proprietor and used by
Hewlett-Packard Company under license.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Maintenance and Service Guide
HP Pavilion Widescreen Notebook zt3000
HP Compaq Business Notebook nx7000
Compaq Presario Widescreen Notebook PC X1000
Second Edition October 2003
First Edition July 2003
Document Part Number: 325388-002
325388-002.book Page iii Friday, October 24, 2003 9:21 AM
Contents
1 Product Description
1.1
1.2
1.3
1.4
1.5
1.6
Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–22
Clearing a Password . . . . . . . . . . . . . . . . . . . . . . . . 1–24
Power Management. . . . . . . . . . . . . . . . . . . . . . . . . 1–25
External Components . . . . . . . . . . . . . . . . . . . . . . . 1–26
Design Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 1–36
2 Troubleshooting
2.1 Computer Setup and Diagnostics Utilities . . . . . . . .
Using Computer Setup . . . . . . . . . . . . . . . . . . . . . . .
Selecting from the File Menu . . . . . . . . . . . . . . . . . .
Selecting from the Security Menu . . . . . . . . . . . . . .
Selecting from the Advanced Menu . . . . . . . . . . . . .
2.2 Troubleshooting Flowcharts . . . . . . . . . . . . . . . . . . .
2–1
2–2
2–3
2–4
2–5
2–7
3 Illustrated Parts Catalog
3.1
3.2
3.3
3.4
3.5
3.6
3.7
Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 3–1
Notebook Major Components . . . . . . . . . . . . . . . . . . 3–2
Miscellaneous Plastics Kit Components . . . . . . . . . 3–10
Miscellaneous Cable Kit Components . . . . . . . . . . 3–12
Miscellaneous Doors/Covers Kit Components . . . . 3–13
Mass Storage Devices . . . . . . . . . . . . . . . . . . . . . . . 3–14
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–15
Maintenance and Service Guide
iii
325388-002.book Page iv Friday, October 24, 2003 9:21 AM
Contents
4 Removal and Replacement Preliminaries
4.1 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 Service Considerations . . . . . . . . . . . . . . . . . . . . . . .
Plastic Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . .
4.3 Preventing Damage to Removable Drives . . . . . . . .
4.4 Preventing Electrostatic Damage . . . . . . . . . . . . . . .
4.5 Packaging and Transporting Precautions . . . . . . . . .
4.6 Workstation Precautions . . . . . . . . . . . . . . . . . . . . . .
4.7 Grounding Equipment and Methods . . . . . . . . . . . . .
4–1
4–2
4–2
4–2
4–3
4–4
4–4
4–5
4–6
5 Removal and Replacement Procedures
5.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2
5.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . 5–3
5.3 Preparing the Notebook for Disassembly . . . . . . . . . 5–4
5.4 Notebook Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–8
5.5 Memory Expansion Board . . . . . . . . . . . . . . . . . . . . 5–9
5.6 Mini PCI Communications Board. . . . . . . . . . . . . . 5–11
5.7 RTC Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–13
5.8 Optical Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–14
5.9 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–15
5.10 Switch Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–18
5.11 Speaker Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–19
5.12 Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–21
5.13 Heat Sink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–22
5.14 Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–24
5.15 Display Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 5–26
5.16 Top Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–30
5.17 Bluetooth Board . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–36
5.18 SD Card Slot Board and Cable. . . . . . . . . . . . . . . . 5–38
5.19 VGA Board and Shield . . . . . . . . . . . . . . . . . . . . . 5–40
5.20 Modem and Cable . . . . . . . . . . . . . . . . . . . . . . . . . 5–42
5.21 System Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–44
iv
Maintenance and Service Guide
325388-002.book Page v Friday, October 24, 2003 9:21 AM
Contents
6 Specifications
A Connector Pin Assignments
B Power Cord Set Requirements
3-Conductor Power Cord Set . . . . . . . . . . . . . . . . . . . . . . B–1
General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . B–1
Country-Specific Requirements . . . . . . . . . . . . . . . . . . . . B–2
C Screw Listing
Index
Maintenance and Service Guide
v
325388-002.book Page 1 Friday, October 24, 2003 9:21 AM
1
Product Description
The HP Pavilion Widescreen Notebook zt3000,
HP Compaq Business Notebook nx7000, and
Compaq Presario Widescreen Notebook PC X1000 offer
advanced modularity, a Mobile Intel® Pentium® 4 Processor-M
processor with 64-bit architecture, industry-leading ATI
MOBILITY RADEON Accelerated Graphics Port (AGP)
implementation, and extensive multimedia support.
HP Pavilion Widescreen Notebook zt3000,
HP Compaq Business Notebook nx7000, and
Compaq Presario Widescreen Notebook PC X1000
Maintenance and Service Guide
1–1
325388-002.book Page 2 Friday, October 24, 2003 9:21 AM
Product Description
1.1 Models
Notebook models are shown in Tables 1-1 through 1-4.
Table 1-1
HP Pavilion zt3000, HP Compaq nx7000,
and Compaq Presario X1000
Model Naming Conventions
Key
C
P
170
Y5
80
Y
Ci
10
P
XXXXXX-XXX
1
2
3
4
5
6
7
8
9
10
Key
Description
Options
1
Brand/Series
designator
V = HP Pavilion
zt3000
C = HP Compaq
nx7000
2
Processor type
P = Mobile Intel Pentium 4 Processor-M
3
Processor speed
170 = 1.7 GHz
160 = 1.6 GHz
150 = 1.5 GHz
140 = 1.4 GHz
130 = 1.3 GHz
4
Display type/
size/resolution
Z = wide UXGA
(1920 × 1200)
Y = wide SXGA+
(1680 × 1050)
W = wide XGA
(1280 × 800)
5 = 15.4 in
5
Hard drive size
80 = 80 GB
60 = 60 GB
40 = 40 GB
6
Optical drive
designator
C = CD-ROM
D = DVD-ROM
Y = DVD+RW
W = DVD/CD-RW
combo drive
7
Integrated
communication/
wireless device
C = combination LAN/modem
b = 802.11b
i = 802.11b + Bluetooth®
1–2
P = Compaq
Presario X1000
Maintenance and Service Guide
325388-002.book Page 3 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-1
HP Pavilion zt3000, HP Compaq nx7000,
and Compaq Presario X1000
Model Naming Convention (Continued)
8
RAM
10 = 1024 MB
51 = 512 MB
25 = 256 MB
9
Operating system
H = Microsoft® Windows® XP Home
P = Windows XP Pro
10
SKU#
Table 1-2
HP Pavilion zt3000 Models
All HP Compaq nx7000 models feature:
■ TouchPad pointing device
■ 8-cell, 4.4-wH lithium ion (Li-Ion) battery pack
■ 1-year warranty on parts and labor
V
P
170
Asia Pacific
V
P
160
P
160
P
160
51
H
Y5
80
Y
Cb
51
H
Y5
80
Y
Cb
25
H
Y5
80
W
Ci
51
P
Ci
51
H
DR248A AB1
P
160
Hong Kong
V
Cb
DR253A AB0
and
DR258A AB0
Korea
V
Y
DR260A UUF
Taiwan
V
80
DR255A UUF
Asia Pacific
V
Y5
Y5
60
Y
DR249A AB5
P
160
Australia/New Zealand
Y5
60
Y
Thailand
Ci
51
DR250A AKL
P
DR244A ABG
Maintenance and Service Guide
1–3
325388-002.book Page 4 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-2
HP Pavilion zt3000 Models (Continued)
V
P
160
Korea
V
P
160
P
160
P
160
P
150
P
150
P
150
P
150
P
150
Denmark
Europe
Germany
Italy
1–4
Cb
25
H
W5
60
Y
W5
60
W
Y5
40
W
Taiwan
Cb
DR256A AB0
51
H
Switzerland
Cb
51
DP778E UUZ
H
Thailand
DR257A AKL
Ci
25
P
W5
80
Y
Cb
51
H
W5
60
Y
Cb
51
H
W5
40
Y
Cb
51
H
W5
40
Y
Cb
25
H
Cn
51
P
Cb
51
H
DR252A AB0
P
150
Australia/New Zealand
V
W
DP777E UUZ
Taiwan
V
P
DM778A ABA
Switzerland
V
51
DM779A ABA
United States
V
Ci
DR245A AB2
United States
V
40
DR257A AB5
People’s Republic
of China
V
Y5
DP778E AB7
Hong Kong
V
W
DR254A UUF
Greece
V
60
DR247A AB1
Asia Pacific
V
Y5
P
150
W5
40
Y
DR243A ABG
W5
40
W
DP779E ABY
DP779E ABB
DP782E ABD
DP779E ABZ
The Netherlands
Saudi Arabia
Spain
United Kingdom
DP783E ABH
DP779E ABV
DP779E ABE
DP779E ABU
Maintenance and Service Guide
325388-002.book Page 5 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-2
HP Pavilion zt3000 Models (Continued)
V
P
150
Asia Pacific
V
P
140
P
140
P
140
P
140
P
140
P
140
P
140
Taiwan
Y
Cb
51
P
W5
60
W
Cb
51
H
W5
40
Y
Cb
51
H
W5
40
W
Cb
51
H
W5
40
W
Cb
51
P
W5
40
W
Cb
25
H
W5
40
W
Norway
Portugal
Saudi Arabia
Spain
Switzerland
United Kingdom
United States
Ci
25
P
Cn
25
P
Cb
25
H
DP776E ABN
DP776E AB9
DP776E ABV
DP776E ABE
DP776E UUZ
DP776E ABU
DP479U ABA
DR246A AB1
P
140
Australia/New Zealand
V
80
DP776E UUG
DP776E ABY
DP776E ABF
DP776E ABB
DP776E AB7
DP776E ABZ
DP776E ABH
Korea
V
W5
DR204A ABM
Belgium
Denmark
France
Europe
Greece
Italy
The Netherlands
V
H
DP784E ABF
DP785E ABN
DM781E ABD
DM783A ABA
Latin America
V
25
DP786E ABF
France
Norway
Germany
United States
V
Cb
DM781A ABA
France
V
W
DR205A ABM
United States
V
40
DR259A UUF
Latin America
V
W5
P
140
W5
40
W
DR242A ABG
W5
40
D
DR251A AB0
Maintenance and Service Guide
1–5
325388-002.book Page 6 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-3
HP Compaq nx7000 Models
All HP Compaq nx7000 models feature:
■ TouchPad pointing device
■ 8-cell, 4.4-wH Li-Ion battery pack
■ 1-year warranty on parts and labor
C
P
160
Korea
C
P
160
P
160
P
160
Thailand
1–6
Cb
51
P
Y
Ci
51
P
Y5
60
W
Cb
51
P
Y5
60
W
The Netherlands
Norway
Poland
Portugal
Russia
Saudi Arabia
Slovenia
Spain
Sweden/Finland
Switzerland
Turkey
United Kingdom
Ci
51
P
Cb
51
H
Cb
51
P
DG706A ABH
DG706A ABN
DG706A AKD
DG706A AB9
DG706A ACB
DG706A ABV
DG706A AKN
DG706A ABE
DG706A AK8
DG706A UUZ
DG706A AB8
DG706A ABU
DR758P AB5
P
160
W5
80
W
DR749P AB0
P
160
Asia Pacific
Taiwan
C
60
DG706A ABF
DG706A ABD
DG706A AB7
DG706A AKC
DG706A ABT
DG706A ABZ
DM436A ABJ
Taiwan
C
Y5
DG706A UUG
DG706A AKB
DG706A ABY
DG706A ABB
Hong Kong
C
W
DG706T ABF
Belgium
Czech Republic
Denmark
European
International
France
Germany
Greece
Hungary
Israel
Italy
Japan
C
80
DM942A AB1
France
C
Y5
W5
80
W
DR752P UUF
DR748P AB0
P
160
W5
60
Y
Thailand
Cb
51
DR752P AKL
P
DM434A AKL
Maintenance and Service Guide
325388-002.book Page 7 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-3
HP Compaq nx7000 Models (Continued)
C
P
160
Brazil
French Canada
P
160
Taiwan
C
P
160
Latin America
C
P
150
P
150
P
150
P
150
P
150
Europe
25
W5
CN
Y5
80
W
25
P
DS303P AB2
P
United States
DP093A ABA
Cb
51
P
Y5
80
W
Ci
51
P
Y5
60
W
Cb
51
P
Y5
60
W
Korea
DM941A AB1
Cb
25
P
Y5
60
W
Ci
25
P
Cb
25
P
Ci
51
H
DS304P AB5
P
150
Australia
C
Cb
People’s
Republic
of China
D
DL855A ABJ
DL855A ABM
DM945A AKL
DL855A ABA
Japan
Latin America
Thailand
United States
DN896A AB0
40
P
DR757P AB5
Hong Kong
C
D
DN894A UUF
Hong Kong
C
40
51
DR760P ABG
Asia Pacific
C
W5
Cb
DR764P ABG
Australia
C
W
DP093A ABM
Australia
C
60
DM945A UUF
and
DL855A UUF
DL855A AC4
DL855A ABC
Asia Pacific
C
W5
Y5
40
W
DR762P ABG
P
150
Y5
40
W
DJ223S ABB
Maintenance and Service Guide
1–7
325388-002.book Page 8 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-3
HP Compaq nx7000 Models (Continued)
C
P
150
Germany
Greece
Hungary
Israel
Italy
The Netherlands
P
150
Italy
C
P
150
P
150
P
150
Asia Pacific
Australia/New Zealand
Japan
C
P
150
Asia Pacific
C
Taiwan
1–8
Y5
40
W
Ci
51
P
Norway
Poland
Portugal
Russia
Saudi Arabia
Slovenia
Spain
Sweden/Finland
Switzerland
Turkey
United Kingdom
Ci
25
P
Cb
51
P
Cb
51
H
DG705A ABN
DG705A AKD
DG705A AB9
DG705A ACB
DG705A ABV
DG705A AKN
DG705A ABE
and
DG705T ABE
DG705A AK8
DG705A UUZ
DG705A AB8
DG705A ABU
and
DG705T ABU
Y5
40
C
DM940A AB1
Asia Pacific
Australia/New Zealand
Japan
C
W
DJ218S ABZ
Korea
C
40
DG705A UUG
DG705A AKB
DG705A ABY
DG705A ABB
DG705A ABF
and
DG705T ABF
DG705A ABD
and
DG705T ABD
DG705A AB7
DG705A AKC
DG705A ABT
DG705A ABZ
DG705A ABH
Belgium
Czech Republic
Denmark
Europe
France
C
Y5
W5
80
W
DL848A UUF
DL848A ABG
DL848A ABJ
W5
80
W
DL847A UUF
DL847A ABG
DL847A ABJ
W5
80
W
Korea
Taiwan
Thailand
Cb
51
DL848A AB1
DL850A AB0
DL848A AKL
P
Korea
Taiwan
Thailand
DL847A AB1
DL849A AB0
DL847A AKL
Cb
25
P
Cb
25
H
DM943A UUF
P
150
W5
60
W
DR747P AB0
Maintenance and Service Guide
325388-002.book Page 9 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-3
HP Compaq nx7000 Models (Continued)
C
P
150
People’s Republic
of China
C
P
150
P
150
P
150
P
150
P
150
P
140
P
140
P
140
Hong Kong
W5
40
W
W5
40
W
W5
40
Cb
51
H
Cb
51
P
Cb
25
P
Australia
DS312P ABG
D
Cb
25
H
W5
40
D
Cb
25
P
Y5
60
Cb
25
P
Cb
51
P
Cb
25
P
W
Y5
40
W
Y5
40
W
DR763P ABG
P
140
Australia
C
DR746P AB0
DM939A AB1
Australia
C
Taiwan
DR759P ABG
Korea
C
P
DQ885P AB2,
DL838A AB2,
and
DS301P AB2
Australia
C
W
25
DL842A AB0
People’s Republic
of China
C
40
DM944A UUF
Taiwan
C
W5
Cb
DN728A UUF
Asia Pacific
C
W
DJ169S UUZ
Asia Pacific
C
60
DS302P AB2
Switzerland
C
W5
Y5
40
D
Hong Kong
DR756P AB5
Cb
25
P
Cb
25
H
DR761P ABG
P
140
Y5
30
W
DR755P AB5
Maintenance and Service Guide
1–9
325388-002.book Page 10 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-3
HP Compaq nx7000 Models (Continued)
C
P
140
Sweden
C
P
140
P
140
Asia Pacific
Australia/New Zealand
Japan
C
P
140
Asia Pacific
C
P
140
P
140
Germany
1–10
W5
60
W
DL844A UUF
DL844A ABG
DM437A AB5
DL844A ABJ
W5
60
W
DL843A UUF
DL843A ABG
DL843A ABJ
W5
60
W
W5
60
W
W5
40
W
DM435A ABJ
P
140
Thailand
C
Cb
51
H
Cb
25
H
Korea
Taiwan
Thailand
Cb
25
DL844A AB1
DL846A AB0
DL844A AKL
P
Korea
Taiwan
Thailand
Ci
51
DL843A AB1
DL845A AB0
DL843A AKL
P
Hong Kong
DL853A ABF
Nb
51
H
Cb
25
H
DQ822C ABB
Japan
C
W
DL853A UUF
Europe
C
60
DJ200S AK8
Asia Pacific
Australia/New Zealand
Hong Kong
Japan
C
W5
W5
40
W
Taiwan
DR750P AB0
Cb
25
P
Ci
51
H
DM433A AKL
P
140
W5
40
W
DJ202S ABD
Maintenance and Service Guide
325388-002.book Page 11 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-3
HP Compaq nx7000 Models (Continued)
C
P
140
Czech Republic
Denmark
Europe
France
Germany
Greece
Hungary
Israel
P
140
Brazil
Latin America
C
P
P
140
W5
40
W
W5
40
D
DL854A AC4
DL854A ABC
140
Hong Kong
C
W
DP094A AC4
DP094A ABM
Brazil
French Canada
C
40
DG704A UUG
and
DG704T UUG
DG704A AKB
DG704A ABY
DG704A ABB
DG704A ABF,
DG704T ABF,
and
DJ231S ABF
DG420A ABD
DG704A AB7
DG704A AKC
DG704A ABT
Belgium
C
W5
W5
40
D
DR754P AB5
P
Asia Pacific
Australia
Korea
People’s Republic
of China
140
W5
40
D
DM438A UUF
DS311P ABG
DM938A AB1
DL837A AB2
and
DM438A AB2
Maintenance and Service Guide
Ci
25
P
Italy
The Netherlands
Norway
Poland
Portugal
Russia
Saudi Arabia
Slovenia
Spain
Sweden/Finland
Switzerland
Turkey
United Kingdom
Cn
25
P
United States
Cb
51
DP094A ABA
P
Latin America
United States
Cb
25
DL854A ABM
DL854A ABA
and
DP076C ABA
H
Taiwan
Cb
DG704A ABZ
DG704A ABH
DG704A ABN
DG704A AKD
DG704A AB9
DG704A ACB
DG704A ABV
DG704A AKN
DG704A ABE
DG704A AK8
DG704A UUZ
DG704A AB8
DG704A ABU
DR745P AB0
25
Taiwan
Thailand
P
DR744P AB0
and
DR751P AB0
DM438A AKL
1–11
325388-002.book Page 12 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-3
HP Compaq nx7000 Models (Continued)
C
P
140
Asia Pacific
C
P
140
P
130
P
130
P
130
P
130
P
130
P
130
Asia Pacific
Australia/New Zealand
Hong Kong
Japan
Japan (English)
Korea
C
P
130
Asia Pacific
C
Asia Pacific
1–12
Y5
80
W
Y5
40
W
W5
40
W
W5
40
W
DL852A UUF
Asia Pacific
Australia/New Zealand
Hong Kong
C
D
P
Korea
DM937A AB1
Cb
25
H
Cb
51
P
Cb
51
P
Cb
25
P
Ci
25
P
DN893A AB0
Asia Pacific
C
30
25
DP119S ABA
Taiwan
C
W5
Cb
DP113S ABA
United States
C
C
DR753P AB5
United States
C
40
DR850P UUF
Hong Kong
C
W5
W5
40
D
DL840A UUF
DL840A ABG
DL840A AB5
W5
40
D
DL839A UUF
DL839A ABG
DL839A AB5
DL839A ABJ
DL839A ACF
DL839A AB1
and
DM936A AB1
W5
40
D
DL851A UUF
P
130
W5
40
C
DR852P UUF
Hong Kong
Cb
25
DL852A AB5
H
Japan
Korea
Thailand
Cb
25
DL840A ABJ
DL840A AB1
DL840A AKL
P
DL841A AB0
and
DN895A AB0
DL839A AKL
DH904A ABA
Taiwan
Thailand
United States
Ci
25
P
Hong Kong
Cb
25
Korea
DL851A AB5
P
DM935A AB1
Maintenance and Service Guide
325388-002.book Page 13 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-4
Compaq Presario X1000 Models
All Compaq Presario X1000 models feature:
■ TouchPad pointing device
■ 8-cell, 4.4-wH Li-Ion battery pack
■ 1-year warranty on parts and labor
X1094
P
160
Australia/New Zealand
X1082
P
160
Australia/New Zealand
X1064
P
160
Korea
X1081
P
160
P
160
Asia Pacific
X1030
P
160
P
160
People’s Republic
of China
X1046
P
160
Hong Kong
51
H
Cb
51
H
Ci
51
H
Cb
51
H
DR824A ABG
Y5
80
Y
DR278A ABG
Y5
80
Y
Y5
80
W
DR277A ABG
Y5
80
W
Y5
60
Y
Asia Pacific
Cb
51
DR277A UUF
H
Korea
DN606A AB1
Cb
51
H
Cb
25
H
Cb
51
H
Cb
25
H
Ci
51
H
DN591A ABG
Y5
60
Y
Y5
60
W
DN607A AB1
P
160
Australia/New Zealand
X1073
Cb
DQ977A AB2
Korea
X1029
Y
DN601A UUF
Australia/New Zealand
X1071
80
DN625A AB1
Australia/New Zealand
X1045
Y5
P
160
Y5
60
W
DN600A ABG
Y5
60
W
DR269A AB5
Maintenance and Service Guide
Korea
DR269A AB1
1–13
325388-002.book Page 14 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-4
Compaq Presario X1000 Models (Continued)
X1070
P
160
People’s Republic
of China
X1074
P
160
P
160
P
160
P
160
Australia/New Zealand
X1140
P
160
United Kingdom
X1155
P
160
P
160
P
160
P
150
Hong Kong
1–14
D
Ci
51
H
Y5
40
W
Ci
25
H
W5
80
Y
Cb
51
H
Ci
51
H
Cb
51
H
Ci
51
H
Cb
51
H
Cb
51
H
Ci
51
H
Cb
10
H
Cb
51
H
DR823A ABG
W5
80
W
DR824A ABG
W5
60
Y
W5
60
Y
W5
60
W
W5
60
W
Z5
80
Y
DN627A UUF
P
150
United States
X1086
60
DR272A UUF
Asia Pacific
X1015
Y5
DR286A UUF
Asia Pacific
X1066
H
DP775E AK8
Asia Pacific
X1076
25
DP772E ABU
Sweden
X1090
Cb
DR287A AB1
Australia/New Zealand
X1097
D
DR270A AB5
Korea
X1093
60
DQ976A AB2
Hong Kong
X1091
Y5
P
Y5
80
Y
DN624A ABA
150
Y5
80
Y
DR282A AB5
Maintenance and Service Guide
325388-002.book Page 15 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-4
Compaq Presario X1000 Models (Continued)
X1085
P
150
Hong Kong
X1056
P
150
P
150
P
150
P
150
P
150
P
150
P
150
P
150
P
150
Taiwan
25
H
Y5
60
W
Cb
51
H
Y5
60
W
Cb
51
H
Y5
60
W
Cb
25
H
Y5
60
W
Ci
25
H
Y5
60
D
Cb
25
H
W5
80
Y
Cb
51
H
W5
80
W
Cb
51
H
W5
60
Y
Cb
51
H
Cb
51
H
Cb
51
H
DN611A AB5
P
150
The Netherlands
X1088
Cb
DR285A AB0
Hong Kong
X1020
Y
DM774A ABA
Taiwan
X1050
60
DN616A AB2
United States
X1089
Y5
DR280A AB1
People’s Republic
of China
X1040
H
DQ975A AB2
Korea
X1055
51
DN584A UUF
People’s Republic
of China
X1084
Cb
DN610A AB5
Asia Pacific
X1069
W
DN617A AB2
Hong Kong
X1023
80
DR281A AB5
People’s Republic
of China
X1049
Y5
P
W5
60
Y
DM416A ABH
150
W5
60
W
DR284A AB0
Maintenance and Service Guide
1–15
325388-002.book Page 16 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-4
Compaq Presario X1000 Models (Continued)
X1079
P
150
Taiwan
X1044
P
150
P
150
P
150
P
150
P
150
P
150
P
150
P
150
P
P
People’s Republic
of China
1–16
Cb
51
H
W5
60
W
Cb
51
H
W5
60
W
Cb
25
H
W5
60
W
Cb
25
H
W5
40
W
Cb
51
H
W5
40
W
Spain
United Kingdom
Cb
25
H
Cb
25
H
Cb
25
H
Cb
10
P
Cb
25
H
DL963A ABE
DL963A ABU
W5
40
W
W5
40
D
DQ973A AB2
140
United States
X1063
W
DN589A UUF
People’s Republic
of China
X1020
60
DQ974A AB2
Asia Pacific
X1067
W5
DL963A ABY
DL963A AB9
People’s Republic
of China
X1028
H
DN615A AB2
Denmark
Portugal
X1068
51
DN619A AB1
People’s Republic
of China
X1010
Cb
DN593A UUF
Korea
X1054
W
DN605A AB1
Asia Pacific
X1058
60
DR275A AB0
Korea
X1032
W5
Y5
80
Y
DK572A ABA
140
Y5
60
W
DN623A AB2
Maintenance and Service Guide
325388-002.book Page 17 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-4
Compaq Presario X1000 Models (Continued)
X1022
P
140
Asia Pacific
X1065
P
140
P
140
P
140
P
140
P
140
P
140
P
140
P
140
P
140
Y5
40
W
Y5
40
W
Y5
40
C
W5
80
Y
W5
60
W
W5
60
W
P
P
United States
W5
60
W
W5
60
W
DL857A ABL
140
Sweden/Finland
X1001
Ci
25
H
Cb
25
H
Ci
25
H
Korea
DR279A AB1
Cb
25
H
Cb
51
P
Cb
51
H
Cb
51
H
Cb
51
H
Cb
51
H
DK574A ABA
Canada (English)
X1007
W
DN597A AB0
United States
X1010
60
DN598A AKL
Taiwan
X1018
H
DL898A ABA
Thailand
X1036
25
DR825A UUF
United States
X1037
Y5
DR279A UUF
Asia Pacific
X1028
Cb
DN609A AB5
Asia Pacific
X1095
W
DN626A UUF
Hong Kong
X1083
60
DN583A UUF
Asia Pacific
X1048
Y5
W5
60
W
French Canada
Cb
51
H
Cb
51
H
DL857A ABC
DL964A AK8
140
W5
60
W
DK575A ABA
Maintenance and Service Guide
1–17
325388-002.book Page 18 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-4
Compaq Presario X1000 Models (Continued)
X1057
P
140
Korea
X1053
P
140
P
140
P
140
P
140
P
140
P
140
P
140
P
140
P
140
France
1–18
25
H
W5
60
W
Ci
25
H
W5
60
D
Cb
51
H
W5
60
D
Cb
51
H
W5
40
Y
Cb
51
H
W5
40
Y
Cb
51
H
W5
40
W
Italy
DM415A ABZ
Cb
51
H
W5
40
W
Cb
51
H
W5
40
W
Cb
51
H
Cb
51
H
Cb
51
H
DN622A UUF
P
140
United States
X1012
Cb
DR276A AKL
Asia Pacific
X1030
W
DP773E AK8
Thailand
X1062
60
DM415A ABF
Sweden
X1080
W5
DN604A AB1
France
X1110
H
DR274A AB0
Korea
X1016
25
DR283A AB0
Taiwan
X1043
Cb
DR822A AB1
Taiwan
X1078
W
DN614A AB2
Korea
X1087
60
DN618A AB1
People’s Republic
of China
X1092
W5
P
W5
40
W
DM773A ABA
140
W5
40
W
DL965A ABF
Maintenance and Service Guide
325388-002.book Page 19 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-4
Compaq Presario X1000 Models (Continued)
X1105
P
140
United Kingdom
X1077
P
140
P
140
P
140
P
140
P
140
P
140
P
140
P
140
P
140
Asia Pacific
Cb
25
H
40
W
Cb
25
H
W5
40
W
Cb
25
H
W5
40
W
Cb
25
H
W5
40
W
United States
DM777A ABA
Cb
25
H
W5
40
W
Cb
25
H
W5
40
W
Ci
51
H
W5
40
W
Ci
25
H
P
W5
40
D
Taiwan
DR826A AB0
Cb
25
H
Cb
25
H
Cb
25
H
DN612A AB2
140
Hong Kong
X1021
W5
DR826A UUF
People’s Republic
of China
X1072
W
DP774E AK8
Asia Pacific
X1051
40
DM771A ABA
Sweden
X1096
H
DN603A AB1
United States
X1115
W5
DP485U ABL
DP485U ABC
Korea
X1002
25
DN613A AB2
Canada English
French Canada
X1042
Cb
DR271A UUF
People’s Republic
of China
X1050
W
DR273A AB0
Asia Pacific
X1052
40
DP771E ABU
Taiwan
X1075
W5
W5
30
W
DR268A AB5
P
130
Y5
40
D
DN582A UUF
Maintenance and Service Guide
1–19
325388-002.book Page 20 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-4
Compaq Presario X1000 Models (Continued)
X1038
P
130
Thailand
X1010
P
130
P
130
P
130
P
130
P
130
P
130
P
130
P
130
P
51
H
W5
60
D
Cb
51
H
W5
40
Y
Cb
51
H
W5
40
W
Cb
51
H
W5
40
W
Cb
51
H
W5
40
W
Cb
25
H
W5
40
W
Cb
25
H
W5
40
W
Cb
25
H
130
W5
40
W
Cb
25
H
Cb
25
H
DN592A UUF
P
Belgium
Denmark
France
Italy
Latin America
1–20
Cb
DN602A AB1
Asia Pacific
X1005
W
DN608A AB5
Korea
X1031
60
DN621A UUF
Hong Kong
X1041
W5
DN585A ABA
Asia Pacific
X1047
H
DN620A AKL
United States
X1061
51
DM933A ABF
Thailand
X1012
Cb
DN596A AB0
France
X1060
W
DK571A ABA
Taiwan
X1006
60
DN599A AKL
United States
X1035
W5
130
W5
40
W
DL681A UUG
DL681A ABY
DL681A ABF
DL681A ABZ
DL858A ABM
The Netherlands
Portugal
Spain
Sweden/Finland
United Kingdom
DL681A ABH
DL681A AB9
DL681A ABE
DL681A AK8
DL681A ABU
Maintenance and Service Guide
325388-002.book Page 21 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-4
Compaq Presario X1000 Models (Continued)
X1034
P
130
Taiwan
X1033
P
130
P
130
P
130
Korea
X1026
D
W5
40
D
DN594A UUF
Australia/New Zealand
X1040
40
Cb
25
H
Cb
25
H
DN595A AB0
Asia Pacific
X1027
W5
W5
40
D
Thailand
DN594A AKL
Cb
25
H
Cb
25
H
Cb
25
H
DN588A ABG
W5
40
C
DN601A AB1
P
130
Asia Pacific
Australia/New Zealand
W5
40
C
DN587A UUF
DN587A ABG
Maintenance and Service Guide
Thailand
DN587A AKL
1–21
325388-002.book Page 22 Friday, October 24, 2003 9:21 AM
Product Description
1.2 Features
1–22
■
Mobile Intel Pentium 4 Processor-M 1.7-, 1.6-, 1.5-, 1.4-, or
1.3-GHz processors with 400-MHz processor side bus and
512-KB L2 cache, varying by notebook model
■
15.4-inch wide UXGA (1920 × 1200),
wide SXGA+ (1680 × 1050), or wide XGA (1280 × 800)
TFT display with over 16.7 million colors, varying by
notebook model
■
ATI MOBILITY RADEON graphics with 32- or 64-MB
DDR SDRAM
■
80-, 60-, or 40-GB high-capacity hard drive, varying by
notebook model
■
256-MB high-performance synchronous DRAM (SDRAM),
expandable to 2.0 GB
■
Windows XP Home or Windows XP Pro, varying by
notebook model
■
Full-size Windows 98 keyboard
■
TouchPad pointing device with on/off button and dedicated
scroll up/down surface
■
56-Kbps V.92 modem integrated on the system board
■
Integrated Secure Digital (SD) flash media slot
■
Integrated 10/100 network interface card (NIC)
■
Integrated wireless support for Mini PCI 802.11a/b/g
and Bluetooth local area network (LAN) devices
■
Support for one Type II PC Card slot with support for
both 32-bit (CardBus) and 16-bit PC Cards
■
External 65-watt AC adapter with power cord
■
8-cell Li-Ion battery pack
■
Harman/Kardon speakers (HP Pavilion zt3000 models only)
Maintenance and Service Guide
325388-002.book Page 23 Friday, October 24, 2003 9:21 AM
Product Description
■
JBL Pro speakers (HP Compaq nx7000 and Compaq Presario
X1000 models only)
■
Support for the following optical drives:
❏
24X Max DVD/CD-RW combo drive
❏ 8X Max DVD-RW drive
❏ 24X Max CD-ROM drive
■
Connectors for:
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
❏
Microphone
Stereo speaker/headphone
Infrared
DC power
External monitor
S-Video
USB (3)
RJ-45 (network interface card, [NIC])
RJ-11 (modem)
Parallel
1394 digital
One Type II PC Card slot
Docking
Maintenance and Service Guide
1–23
325388-002.book Page 24 Friday, October 24, 2003 9:21 AM
Product Description
1.3 Clearing a Password
If the notebook you are servicing has an unknown password,
follow these steps to clear the password. These steps also
clear CMOS:
1. Prepare the notebook for disassembly (refer to Section 5.3,
“Preparing the Notebook for Disassembly,” for more
information).
2. Remove the real time clock (RTC) battery (refer to
Section 5.7, “RTC Battery”).
3. Wait approximately five minutes.
4. Replace the RTC battery and reassemble the notebook.
5. Connect AC power to the notebook. Do not reinsert the
battery pack at this time.
6. Turn on the notebook.
All passwords and all CMOS settings have been cleared.
1–24
Maintenance and Service Guide
325388-002.book Page 25 Friday, October 24, 2003 9:21 AM
Product Description
1.4 Power Management
The notebook comes with power management features that
extend battery operating time and conserve power. The notebook
supports the following power management features:
■
Standby
■
Hibernation
■
Setting customization by the user
■
Hotkeys for setting level of performance
■
Battery calibration
■
Lid switch Standby/resume
■
Power/Standby button
■
Advanced Configuration and Power Management (ACP)
compliance
Maintenance and Service Guide
1–25
325388-002.book Page 26 Friday, October 24, 2003 9:21 AM
Product Description
1.5 External Components
The external components on the front and left-side of the
notebook are shown in the following illustration and described
in Table 1-5.
Front and Left-Side Components
1–26
Maintenance and Service Guide
325388-002.book Page 27 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-5
Front and Left-Side Components
Item
Component
Function
1
PC Card slot
Supports an optional Type I or Type II 32-bit
(CardBus) or 16-bit PC Card.
2
PC Card eject button
Ejects an optional PC Card from the
PC Card slot.
3
Optical drive
Supports an optical disc.
4
SD (Secure Digital)
Memory Card slot
Supports SD Cards and MultiMediaCards.
5
Microphone jack
Connects an optional monaural or stereo
microphone.
6
Audio line-out jack
Connects optional headphone or powered
stereo speakers. Also connects the audio
function of an audio/video device such as a
television or VCR.
7
Display release latch
Opens the notebook.
8
Wireless device button
Turns an optional internal wireless device
on or off.
Maintenance and Service Guide
1–27
325388-002.book Page 28 Friday, October 24, 2003 9:21 AM
Product Description
The notebook rear panel and right-side components are shown in
the following illustration and described in Table 1-6.
Rear Panel and Right-Side Components
Table 1-6
Rear Panel and Right-Side Components
Item
Component
Function
1
Infrared port
Provides wireless communication between
the notebook and an optional
IrDA-compliant device.
2
Power connector
Connects an AC adapter cable.
1–28
Maintenance and Service Guide
325388-002.book Page 29 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-6
Rear Panel and Right-Side Components (Continued)
Item
Component
Function
3
Security cable slot
Attaches an optional security cable to the
notebook.
✎
4
Vents (2)
The purpose of security solutions
is to act as a deterrent. These
solutions do not prevent the
product from being mishandled or
stolen.
Allow airflow to cool internal components.
Ä
To prevent overheating, use the
notebook only on hard surfaces
which cannot obstruct the vents.
Do not allow a soft surface, such
as bedding, clothing, or a thick
rug, to block airflow.
5
External monitor
connector
Connects an optional VGA external monitor
or projector.
6
S-Video connector
Connects an optional S-Video device, such
as a television, VCR, camcorder, projector,
or video capture card.
7
USB connectors (3)
Connect optional 2.0-compliant USB
devices.
8
RJ-45 network jack
Connects an Ethernet network cable.
9
RJ-11 telephone jack
Connects a modem cable.
10
Parallel connector
Connects an optional parallel device such
as a printer.
11
1394 connector
Connects an optional 1394 device such as
a camcorder or digital camera.
Maintenance and Service Guide
1–29
325388-002.book Page 30 Friday, October 24, 2003 9:21 AM
Product Description
The notebook keyboard components are shown in the following
illustration and described in Table 1-7.
Keyboard Components
1–30
Maintenance and Service Guide
325388-002.book Page 31 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-7
Keyboard Components
Item
Component
Function
1
F1 through F12 function
keys
Perform system and application tasks.
When combined with the Fn key, the
function keys F1 and F3 through F12 perform
additional tasks as hotkeys.
2
num lk key
Enables numeric lock and the internal
keypad.
3
Internal keypad
Can be used like the keys on an external
numeric keypad.
4
Cursor control keys
Move the cursor around the screen.
5
Applications key
Displays a shortcut menu for items beneath
the pointer.
6
Windows logo key
Display the Windows Start menu.
7
Fn key
Executes frequently used system functions
when pressed in combination with
another key.
Maintenance and Service Guide
1–31
325388-002.book Page 32 Friday, October 24, 2003 9:21 AM
Product Description
The notebook top components are shown in the following
illustration and described in Table 1-8.
Top Components
Table 1-8
Top Components
Item
Component
Function
1
Stereo speakers (2)
Produce stereo sound.
2
Power button
When the notebook is:
■ Off, press to turn on the notebook.
■ On, briefly press to initiate Hibernation.
■ In Standby, briefly press to resume from
Standby.
■ In Hibernation, briefly press to restore
from Hibernation.
1–32
Maintenance and Service Guide
325388-002.book Page 33 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-8
Top Components (Continued)
Item
Component
Function
3
Caps lock light
On: Caps lock is on.
4
Num lock light
On: Num lock or the internal keypad is on.
5
Display lid switch
■ If the notebook is closed while on, turns
off the display.
■ If the notebook is opened while in
Standby, turns on the notebook
(resumes from Standby).
6
Volume buttons (2)
Increase or decrease system volume.
7
Mute button
Mutes or restores volume.
8
TouchPad on/off
button
Enables/disables the TouchPad.
9
TouchPad scroll
zones (2)
Scroll upward or downward.
10
Left and right
TouchPad buttons
Function like the left and right buttons on an
external mouse.
11
TouchPad
Moves the pointer and selects or activates
items on the screen.
12
TouchPad light
On: TouchPad is enabled.
Maintenance and Service Guide
1–33
325388-002.book Page 34 Friday, October 24, 2003 9:21 AM
Product Description
The external components on the bottom of the notebook are
shown in the following illustration and described in Table 1-9.
Bottom Components
Table 1-9
Bottom Components
Item
Component
Function
1
Fan vent
Allows airflow to cool internal
components.
Ä
2
1–34
RTC battery compartment
To prevent overheating,
do not obstruct the vent.
Using the notebook on a
soft surface, such as a
pillow, blanket, rug, or
thick clothing, may block
airflow.
Contains the RTC battery.
Maintenance and Service Guide
325388-002.book Page 35 Friday, October 24, 2003 9:21 AM
Product Description
Table 1-9
Bottom Components (Continued)
Item
Component
Function
3
Docking connector
Connects the notebook to an
optional port replicator.
4
Mini PCI compartment
Contains the Mini PCI wireless
card.
5
Hard drive bay
Holds the internal hard drive.
6
Battery bay
Holds the battery pack.
7
Battery pack release latch
Releases a battery pack from the
battery bay.
8
Memory expansion
compartment
Contains one memory slot for an
optional 128-, 256-, 512-, or
1024-MB memory module.
Maintenance and Service Guide
1–35
325388-002.book Page 36 Friday, October 24, 2003 9:21 AM
Product Description
1.6 Design Overview
This section presents a design overview of key parts and features
of the notebook. Refer to Chapter 3, “Illustrated Parts Catalog,”
to identify replacement parts, and Chapter 5, “Removal and
Replacement Procedures,” for disassembly steps. The system
board provides the following device connections:
Ä
■
Memory expansion board
■
Hard drive
■
Display
■
Keyboard and TouchPad
■
Audio
■
Mobile Intel Pentium 4 Processor-M processors
■
Fan
■
PC Card
■
Modem, NIC, and wireless devices
CAUTION: To properly ventilate the notebook, allow at least a 7.6-cm
(3-inch) clearance on the left and right sides of the notebook.
The notebook uses an electric fan for ventilation. The fan is
controlled by a temperature sensor and is designed to turn on
automatically when high temperature conditions exist. These
conditions can be caused by high external temperatures, heavy
system power consumption, certain power management/battery
conservation configurations, battery fast charging, and some
software applications. Exhaust air is displaced through the
ventilation grill located on the left side of the notebook.
1–36
Maintenance and Service Guide
325388-002.book Page 1 Friday, October 24, 2003 9:21 AM
2
Troubleshooting
Å
WARNING: Only authorized technicians trained by HP should
repair this equipment. All troubleshooting and repair procedures are
detailed to allow only subassembly/module level repair. Because of the
complexity of the individual boards and subassemblies, do not attempt
to make repairs at the component level or modifications to any printed
wiring board. Improper repairs can create a safety hazard. Any
indication of component replacement or printed wiring board
modification may void any warranty or exchange allowances.
2.1 Computer Setup and Diagnostics
Utilities
The notebook features two system management utilities:
■
Computer Setup—A system information and customization
utility that can be used even when your operating system is
not working or will not load. This utility includes settings that
are not available in Microsoft® Windows®.
Maintenance and Service Guide
2–1
325388-002.book Page 2 Friday, October 24, 2003 9:21 AM
Troubleshooting
■
Diagnostics for Windows—A system information and
diagnostic utility that is used within the Windows operating
system. Use this utility whenever possible to:
❏
Display system information.
❏
Test system components.
❏
Troubleshoot a device configuration problem in
Windows XP Professional or Windows XP Home.
is not necessary to configure a device connected to a USB
✎ Itconnector
on the notebook or to an optional port replicator.
Using Computer Setup
Information and settings in Computer Setup are accessed from
the File, Security, or Advanced menus:
1. Turn on or restart the notebook. Press F10 while the
F10 = ROM-Based Setup message is displayed in the lower
left corner of the screen.
❏
To change the language, press F2.
❏
To view navigation information, press F1.
❏
To return to the Computer Setup menu, press esc.
2. Select the File, Security, or Advanced menu.
3. To close Computer Setup and restart the notebook:
❏
Select File > Save Changes and Exit and press enter.
-or❏
Select File > Ignore Changes and Exit and press enter.
4. When you are prompted to confirm your action, press F10.
2–2
Maintenance and Service Guide
325388-002.book Page 3 Friday, October 24, 2003 9:21 AM
Troubleshooting
Selecting from the File Menu
Table 2-1
File Menu
Select
To Do This
System Information
■ View identification information about the
notebook, a port replicator, and any battery
packs in the system.
■ View specification information about the
processor, memory and cache size, and
system ROM.
Save to Floppy
Save system configuration settings to a diskette.
Restore from Floppy
Restore system configuration settings from a
diskette.
Restore Defaults
Replace configuration settings in Computer
Setup with factory default settings. Identification
information is retained.
Ignore Changes and Exit
Cancel changes entered during the current
session, then exit and restart the notebook.
Save Changes and Exit
Save changes entered during the current
session, then exit and restart the notebook.
Maintenance and Service Guide
2–3
325388-002.book Page 4 Friday, October 24, 2003 9:21 AM
Troubleshooting
Selecting from the Security Menu
Table 2-2
Security Menu
Select
To Do This
Administrator Password
Enter, change, or delete an administrator
password.
Power-on Password
Enter, change, or delete a power-on password.
DriveLock Passwords
Enable/disable DriveLock; change a DriveLock
User or Master password.
✎
Device Security
DriveLock Settings are accessible only
when you enter Computer Setup by
turning on (not restarting) the notebook.
Enable/disable:
■ Ports
■ Diskette write*
■ CD-ROM or diskette startup
✎
System IDs
2–4
Settings for a DVD-ROM can be
entered in the CD-ROM field.
Enter identification numbers for the notebook,
a port replicator, and all battery packs in the
system.
Maintenance and Service Guide
325388-002.book Page 5 Friday, October 24, 2003 9:21 AM
Troubleshooting
Selecting from the Advanced Menu
Table 2-3
Advanced Menu
Select
To Do This
Language
Change the Computer Setup language.
Boot Options
Enable/disable:
■ QuickBoot, which starts the notebook more
quickly by eliminating some startup tests.
(If you suspect a memory failure and want
to test memory automatically during startup,
disable QuickBoot.)
■ MultiBoot, which sets a startup sequence that
can include most bootable devices and media
in the system.
Device Options
■ Enable/disable the embedded numeric
keypad at startup.
■ Enable/disable multiple standard pointing
devices at startup. (To set the notebook to
support only a single, usually nonstandard,
pointing device at startup, select Disable.)
■ Enable/disable USB legacy support for a
USB keyboard. (When USB legacy support
is enabled, the keyboard works even when
a Windows operating system is not loaded.)
■ Set an optional external monitor or overhead
projector connected to a video card in a port
replicator as the primary device. (When the
notebook display is set as secondary,
the notebook must be shut down before it is
undocked from a port replicator.)
Maintenance and Service Guide
2–5
325388-002.book Page 6 Friday, October 24, 2003 9:21 AM
Troubleshooting
Table 2-3
Advanced Menu (Continued)
Select
To Do This
Device Options
(continued)
■ Change the parallel port mode from
Enhanced Parallel Port (EPP, the default
setting) to standard, bidirectional EPP, or
Enhanced Capabilities Port (ECP).
■ Set video-out mode to NTSC (default), PAL,
NTSC-J, or PAL-M.*
■ Enable/disable all settings in the
SpeedStep window. (When Disable is
selected, the notebook runs in Battery
Optimized mode.)
■ Specify how the notebook recognizes
multiple identical port replicators that are
identically equipped. Select Disable to
recognize the port replicators as a single port
replicator; select Enable to recognize the port
replicators individually, by serial number.
■ Enable/disable the reporting of the processor
serial number by the processor to the
software.
*Video modes vary even within regions. However, NTSC is common in North
America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and
PAL-M, in Brazil. Other South and Central American regions can use NTSC,
PAL, or PAL-M.
2–6
Maintenance and Service Guide
325388-002.book Page 7 Friday, October 24, 2003 9:21 AM
Troubleshooting
2.2 Troubleshooting Flowcharts
Table 2-4
Troubleshooting Flowcharts Overview
Flowchart
Description
2.1
Initial troubleshooting
2.2
No power, part 1
2.3
No power, part 2
2.4
No power, part 3
2.5
No power, part 4
2.6
No video, part 1
2.7
No video, part 2
2.8
Nonfunctioning port replicator
2.9
No operating system (OS) loading
2.10
No OS loading from hard drive, part 1
2.11
No OS loading from hard drive, part 2
2.12
No OS loading from hard drive, part 3
2.13
No OS loading from CD- or DVD-ROM drive
2.14
No audio, part 1
2.15
No audio, part 2
2.16
Nonfunctioning device
2.17
Nonfunctioning keyboard
2.18
Nonfunctioning pointing device
2.19
No network or modem connection
Maintenance and Service Guide
2–7
325388-002.book Page 8 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.1—Initial Troubleshooting
Begin
troubleshooting.
N
Go to
Flowchart 2.2,
No Power.
Is there
power?
Y
N
Check
LED board,
speaker
connections.
Beeps,
LEDs, or error
messages?
N
Y
Go to
Flowchart 2.17,
Nonfunctioning
Device.
All drives
working?
N
Y
Go to
Flowchart 2.6,
No Video.
Is there video?
(no boot)
N
Y
N
Y
Go to
Flowchart 2.9,
No OS Loading.
Is the OS
loading?
N
Connecting
to network
or modem?
Y
N
Is there
sound?
Y
2–8
Keyboard/
pointing
device
working?
Go to
Flowchart 2.18,
Nonfunctioning
Keyboard
or Flowchart 2.19,
Nonfunctioning
Pointing Device.
Go to
Flowchart 2.20,
No Network or
Modem.
Y
Go to
Flowchart 2.15,
No Audio.
End
Maintenance and Service Guide
325388-002.book Page 9 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.2—No Power, Part 1
No power
(power LED
is off).
Remove from
port replicator
(if applicable).
N
N
Power up
on battery
power?
Go to
Flowchart 2.3,
No Power,
Part 2.
Power up
on battery
power?
*Reset
power.
Y
Y
N
N
Power up
on AC
power?
Power up
on AC
power?
*Reset
power.
Y
Go to
Flowchart 2.4,
No Power,
Part 3.
Y
Y
Power up in
port
replicator?
Done
N
1. Reseat the power cables in the port
replicator and at the AC outlet.
2. Ensure that the AC power source is active.
3. Ensure that the power strip is working.
Y
Done
*NOTES:
1. On some models, there is a separate
reset button.
2. On some models, the notebook can be
reset using the Standby switch and
either the lid switch or the main power
switch.
N
Power up
in port
replicator?
Maintenance and Service Guide
Go to
Flowchart 2.8,
Nonfunctioning
Port Replicator.
2–9
325388-002.book Page 10 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.3—No Power, Part 2
Continued from
Flowchart 2.2,
No Power, Part 1.
Visually check for
debris in battery
socket and clean
if necessary.
Y
Power on?
Done
N
Check battery by
recharging it,
moving it to
another notebook,
or replacing it.
N
Replace
power supply
(if applicable).
Power on?
Y
N
Done
Power on?
Go to
Flowchart 2.4,
No Power,
Part 3.
Y
Done
2–10
Maintenance and Service Guide
325388-002.book Page 11 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.4—No Power, Part 3
Continued from
Flowchart 2.3,
No Power, Part 2.
Plug directly
into AC outlet.
Y
Power LED
on?
Done
N
Reseat AC adapter
in notebook and
at power source.
Y
Power on?
Done
N
External
N
Try different
outlet.
Power outlet
active?
Y
Internal or
external AC
adapter?
Internal
Replace external
AC adapter.
N
Go to
Flowchart 2.5,
No Power,
Part 4.
Replace
power cord.
Power on?
Y
Y
Done
Power on?
Done
N
Maintenance and Service Guide
2–11
325388-002.book Page 12 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.5—No Power, Part 4
Continued from
Flowchart 2.4,
No Power, Part 3.
Open
notebook.
Y
Loose or
damaged
parts?
N
Reseat loose
components and
boards, and
replace damaged
items.
Close
notebook and
retest.
N
Power on?
Y
Done
2–12
Replace the following items (if applicable) in
the order given. Check notebook operation
after each of the two following replacement
steps:
1. Internal DC-DC converter, processor, and
system board*
2. Internal AC adapter
*NOTE: Replace these items as a set to
prevent shorting out among components.
Maintenance and Service Guide
325388-002.book Page 13 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.6—No Video, Part 1
No video.
Port
Replicator
*NOTE: To change from internal to
external display, use the hotkey
combination.
Go to
Flowchart 2.7,
No Video, Part 2.
Stand-alone
or port
replicator?
Stand-alone
Internal or
external
display*?
Y
Adjust
brightness.
A
Adjust
brightness.
Press lid
switch to ensure
operation.
Y
Video OK?
Done
N
Internal
External
Video OK?
Y
Done
Video OK?
Done
N
N
Replace the following one at a time. Test after each replacement.
1. Cable between notebook and notebook display (if applicable)
2. Inverter board (if applicable)
3. Display
5. System board
4. VGA board
Check for bent
pins on cable.
N
Video OK?
N
Try
another
display.
Y
Internal and
external
video OK?
Replace
system
board.
Y
Done
Maintenance and Service Guide
Done
2–13
325388-002.book Page 14 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.7—No Video, Part 2
Continued from
Flowchart 2.6,
No Video, Part 1.
Remove
notebook from
port replicator,
if connected.
Adjust
display
brightness.
Check brightness
of external
monitor.
N
Y
Go to “A” in
Flowchart 2.6,
No Video, Part 1.
Video OK?
Y
Video OK?
Done
N
Check that notebook is properly
seated in port replicator, for
bent pins on cable, and for
monitor connection.
Try another
external
monitor.
Y
Video OK?
N
Y
Internal
and external
video OK?
Done
Done
N
Adjust external
monitor display.
2–14
Go to
Flowchart 2.8,
Nonfunctioning
Port Replicator.
Maintenance and Service Guide
325388-002.book Page 15 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.8—Nonfunctioning Port Replicator
(if applicable)
Nonfunctioning
port replicator.
Reseat power
cord in port
replicator and
power outlet.
Check voltage
setting on port
replicator.
Reinstall
notebook into port
replicator.
Y
Reset monitor
cable connector at
port replicator.
Port
replicator
operating?
N
Y
Port
replicator
operating?
Done
Done
N
Remove
notebook, reseat
all internal parts,
and replace any
damaged items in
port replicator.
Maintenance and Service Guide
Replace the following port replicator
components one at a time. Check
notebook operation after each
replacement.
1. Power supply
2. I/O board
3. Backplane board
4. Switch box
5. Port replicator motor mechanism
2–15
325388-002.book Page 16 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.9—No Operating System (OS) Loading
No OS
loading.*
Reseat power
cord in port
replicator and
power outlet.
No OS loading from hard drive,
go to Flowchart 2.10,
No OS Loading, Hard Drive, Part 1.
No OS loading from diskette drive,
go to Flowchart 2.13,
No OS Loading, Diskette Drive.
No OS loading from CD- or DVD-ROM drive,
go to Flowchart 2.14,
No OS Loading, CD- or DVD-ROM Drive.
No OS loading from network,
go to Flowchart 2.20,
No Network/Modem Connection.
*NOTE: Before beginning troubleshooting,
always check cable connections, cable ends,
and drives for bent or damaged pins.
2–16
Maintenance and Service Guide
325388-002.book Page 17 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.10—No OS Loading, Hard Drive, Part 1
OS not
loading from
hard drive.
Y
Nonsystem
disk message?
N
Go to
Flowchart 2.11,
No OS Loading
from Hard Drive,
Part 2.
Reseat
external
hard drive.
Y
OS loading?
Done
N
N
Boot
from
CD?
Y
Go to
Flowchart 2.17,
Nonfunctioning
Device.
Check the Setup
utility for correct
booting order.
N
Boot
from
hard drive?
Y
Done
Maintenance and Service Guide
2–17
325388-002.book Page 18 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.11—No OS Loading, Hard Drive, Part 2
Continued from
Flowchart 2.10,
No OS Loading
from Hard Drive,
Part 1.
Reseat
hard drive.
N
1. Replace hard
drive.
2. Replace system
board.
CD or
diskette in
drive?
Y
Hard drive
accessible?
Y
Done
N
Remove
diskette and
reboot.
Run FDISK.
Y
Boot
from
hard drive?
N
Done
N
Create partition,
then format hard
drive to bootable
C:\ prompt.
Hard drive
partitioned?
Y
N
Boot
from diskette
drive?
Y
N
Go to
Flowchart 2.13,
No OS Loading
from Diskette
Drive.
Hard drive
formatted?
Y
Format hard drive
and bring to
a bootable
C:\ prompt.
N
Y
Hard drive
accessible?
Y
Notebook
booted?
Done
Go to
Flowchart 2.12,
No OS Loading
from Hard Drive,
Part 3.
2–18
N
Load OS using
System Restore
CD (if applicable).
Go to
Flowchart 2.12,
No OS Loading
from Hard Drive,
Part 3.
Maintenance and Service Guide
325388-002.book Page 19 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.12—No OS Loading, Hard Drive, Part 3
Continued from
Flowchart 2.11,
No OS Loading
from Hard Drive,
Part 2.
N
System
files on hard
drive?
Install OS
and reboot.
Y
Y
Y
Virus
on hard
drive?
OS
loading from
hard drive?
Clean virus.
N
Done
N
Y
Run SCANDISK
and check for
bad sectors.
Diagnostics
on diskette?
Replace
hard drive.
N
N
Can bad
sectors
be fixed?
Run diagnostics
and follow
recommendations.
Replace
hard drive.
Y
N
Boot from
hard drive?
Fix bad
sectors.
Replace
hard drive.
Y
Done
Maintenance and Service Guide
2–19
325388-002.book Page 20 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.13—No OS Loading, CD- or
DVD-ROM Drive
Y
No OS
loading from
CD- or
DVD-ROM Drive.
N
Bootable
disc in
drive?
Disc
in drive?
Y
N
Install
bootable disc.
Install bootable
disc and
reboot
notebook.
Try another
bootable disc.
Y
Boots from
CD or DVD?
Done
N
Y
Boots from
CD or DVD?
Reseat
drive.
Done
N
N
Booting
from another
device?
Y
Y
Booting
order
correct?
N
Go to
Flowchart 2.17,
Nonfunctioning
Device.
Clear CMOS.
Refer to
Section 1.2,
“Clearing a
Password,” for
instructions.
Go to
Flowchart 2.17,
Nonfunctioning
Device.
Correct boot
order using
the Setup utility.
2–20
Maintenance and Service Guide
325388-002.book Page 21 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.14—No Audio, Part 1
Y
Turn up audio
internally or
externally.
No audio.
Audio?
Done
N
Y
Notebook in
port replicator
(if applicable)?
N
N
Go to
Flowchart 2.16,
No Audio, Part 2.
Internal
audio?
Undock
Y
Replace the following port replicator
components one at a time, as applicable.
Check audio status after each change.
Go to
Flowchart 2.16,
No Audio, Part 2.
1. Replace port replicator audio cable.
2. Replace audio cable.
3. Replace speaker.
4. Replace port replicator audio board.
5. Replace backplane board.
6. Replace I/O board.
Y
Go to
Flowchart 2.17,
Nonfunctioning
Device.
Audio?
Done
N
Maintenance and Service Guide
2–21
325388-002.book Page 22 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.15—No Audio, Part 2
Continued from
Flowchart 2.15,
No Audio, Part 1.
N
Audio
driver in OS
configured?
Reload
audio drivers.
Y
N
Correct
drivers for
application?
Load drivers and
set configuration
in OS.
Y
Connect to
external
speaker.
N
Audio?
Y
Replace audio
board and
speaker
connections
in notebook
(if applicable).
Y
Audio?
Done
N
1. Replace internal speakers.
2. Replace audio board (if applicable).
3. Replace system board.
2–22
Maintenance and Service Guide
325388-002.book Page 23 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.16—Nonfunctioning Device
Nonfunctioning
device.
Reseat
device.
Unplug the nonfunctioning device from
the notebook and inspect cables and plugs for
bent or broken pins or other damage.
Y
Clear
CMOS.
Any physical
device detected?
Fix or
replace
broken item.
Replace hard
drive.
Go to
Flowchart 2.9,
No OS Loading.
N
Reattach device.
Close notebook,
plug in power,
and reboot.
N
N
Device
boots
properly?
Device
boots
properly?
Y
Y
Done
Maintenance and Service Guide
Replace NIC.
If integrated NIC,
replace system
board.
Done
2–23
325388-002.book Page 24 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.17—Nonfunctioning Keyboard
Keyboard
not operating
properly.
Connect notebook
to good external
keyboard.
N
External
device
works?
Replace
system
board.
Y
Reseat internal
keyboard
connector
(if applicable).
N
Replace internal
keyboard or
cable.
OK?
Y
Y
OK?
Done
Done
N
Replace
system
board.
2–24
Maintenance and Service Guide
325388-002.book Page 25 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.18—Nonfunctioning Pointing Device
Pointing device
not operating
properly.
Connect notebook
to good external
pointing device.
N
Replace
system
board.
External
device
works?
Y
Reseat internal
pointing device
connector
(if applicable).
N
Replace internal
pointing device
or cable.
OK?
Y
Y
OK?
Done
Done
N
Replace
system
board.
Maintenance and Service Guide
2–25
325388-002.book Page 26 Friday, October 24, 2003 9:21 AM
Troubleshooting
Flowchart 2.19—No Network/Modem Connection
No network
or modem
connection.
N
Replace jack
or have jack
activated.
Network
or modem
jack active?
Y
Y
Connect
to nondigital
line.
Digital
line?
N
Y
N
NIC/modem
configured
in OS?
Reload
drivers and
reconfigure.
Done
OK?
N
Y
Disconnect all
power from
the notebook
and open.
Replace
NIC/modem
(if applicable).
Y
Reseat
NIC/modem
(if applicable).
OK?
Done
N
Replace
system
board.
2–26
Maintenance and Service Guide
325388-002.book Page 1 Friday, October 24, 2003 9:21 AM
3
Illustrated Parts Catalog
This chapter provides an illustrated parts breakdown and a
reference for spare part numbers and option part numbers.
3.1 Serial Number Location
When ordering parts or requesting information, provide the
notebook serial number and model number located on the bottom
of the notebook.
Serial Number Location
Maintenance and Service Guide
3–1
325388-002.book Page 2 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
3.2 Notebook Major Components
Notebook Major Components
3–2
Maintenance and Service Guide
325388-002.book Page 3 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook Major Components
Item
Description
1
Display assemblies
Spare Part
Number
With carbonite and platinum blue finish for use with
HP Pavilion zt3000 notebooks
15.4-inch, WUXGA
15.4-inch, WSXGA+
15.4-inch, WXGA
350084-001
350127-001
350126-001
With carbon finish for use with HP Compaq nx7000 notebooks
15.4-inch, WUXGA
15.4-inch, WSXGA+
15.4-inch, WXGA
337006-001
337003-001
337008-001
With silver finish for use with Compaq Presario X1000 notebooks
15.4-inch, WUXGA
15.4-inch, WSXGA+
15.4-inch, WXGA
1a
Display inverter (includes four display rubber
screw covers)
337005-001
337004-001
337007-001
336994-001
Miscellaneous Plastics Kits
2a
2b
2c
2d
2e
2f
Contains parts with carbonite and platinum blue
finish for use with HP Pavilion zt3000 notebooks
350130-001
Contains parts with carbon finish for use with
HP Compaq nx7000 notebooks
338133-001
Contains parts with silver finish for use with
Compaq Presario X1000 notebooks
337009-001
Include:
Switch cover
PC Card slot space saver
Docking connector cover
Hard drive shield
Hard drive connector
Hard drive cover
Notebook feet (not illustrated)
Maintenance and Service Guide
3–3
325388-002.book Page 4 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
Notebook Major Components
3–4
Maintenance and Service Guide
325388-002.book Page 5 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook Major Components (Continued)
Item
Description
3
Keyboards
Asia Pacific
Australia
Belgium
Denmark
France
Germany
Greece
Hong Kong
International
Italy
Korea
Latin
America
4
Spare Part
Number
337016-371
337016-011
337016-181
337016-081
337016-051
337016-041
337016-151
337016-AC1
337016-B31
337016-061
337016-AD1
The Netherlands
Norway
People’s Republic
of China
Portugal
Saudi Arabia
Spain
Switzerland
Taiwan
Thailand
United Kingdom
United States
Speaker covers with cable
7
350122-001
336973-001
Top covers (include TouchPad and TouchPad shield)
For use with HP Pavilion zt3000 notebooks
For use with HP Compaq nx7000 and Compaq
Presario X1000 notebooks
6a
6b
6c
337016-AA1
337016-131
337016-171
337016-071
337016-111
337016-AB1
337016-281
337016-031
337016-001
337016-161
For use with HP Pavilion zt3000 notebooks
For use with HP Compaq nx7000 and Compaq
Presario X1000 notebooks
5
337016-331
337016-091
350123-001
336983-001
Bluetooth wireless communications board
(not illustrated)
338134-001
Miscellaneous Cable Kit, includes
336973-001
Speaker cover cable
SD Card slot board cable
Modem board cable
Optical drives
24X Max DVD-ROM/CD-RW combination drive
8X Max DVD-ROM drive
24X Max CD-ROM drive
Maintenance and Service Guide
336987-001
336986-001
336985-001
3–5
325388-002.book Page 6 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
Notebook Major Components
3–6
Maintenance and Service Guide
325388-002.book Page 7 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook Major Components (Continued)
Item
Description
Spare Part
Number
8
VGA board shield (includes thermal pads)
337013-001
9
VGA boards (include thermal pads)
For use with HP Pavilion zt3000 notebooks
ATI MOBILITY RADEON 9200 with 64-MB
video memory
ATI MOBILITY RADEON 9200 with 32-MB
video memory
For use with HP Compaq nx7000 and Compaq
Presario X1000 notebooks
ATI MOBILITY RADEON 9200 with 64-MB
video memory
ATI MOBILITY RADEON 9200 with 32-MB
video memory
ATI MOBILITY RADEON 7500c with 32-MB
video memory
10
System board (includes thermal pads)
PC Card assembly (not illustrated)
11
Processors (include thermal pads)
350129-001
350128-001
336970-001
336969-001
336968-001
336964-001
337014-001
Mobile Intel Pentium 4 Processor-M, 1.7-GHz
Mobile Intel Pentium 4 Processor-M, 1.6-GHz
Mobile Intel Pentium 4 Processor-M, 1.5-GHz
Mobile Intel Pentium 4 Processor-M, 1.4-GHz
Mobile Intel Pentium 4 Processor-M, 1.3-GHz
345566-001
337011-001
337023-001
337024-001
337010-001
Base enclosure (includes infrared lens)
Left and right wireless antennae with cables
(not illustrated)
Left and right speakers (not illustrated)
336960-001
336959-001
13
Heat sink with fan
Thermal pad (not illustrated)
337000-001
337001-001
14
Fan
336993-001
15
SD Card slot board with cable
336963-001
12
Maintenance and Service Guide
337015-001
3–7
325388-002.book Page 8 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
Notebook Major Components
3–8
Maintenance and Service Guide
325388-002.book Page 9 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook Major Components (Continued)
Item
16a
16b
16c
16d
17
Description
Spare Part
Number
Miscellaneous Doors/Covers Kit, includes:
336984-001
RTC battery
RTC battery cover
Mini PCI compartment cover
Memory expansion compartment cover
Mini PCI communications boards
Mini PCI 802.11b wireless LAN (ROW)
Mini PCI 802.11b wireless LAN (MOW)
Mini PCI 802.11g wireless LAN
18
Memory expansion boards
1024 MB DDR
512 MB DDR
256 MB DDR
128 MB DDR
19
336976-001
336977-001
350083-001
339099-001
336998-001
336997-001
336996-001
Hard drives (hard drive cover, shield, and connector included with
hard drive and in Miscellaneous Plastics Kits)
80-GB (5400-rpm)
80-GB (4200-rpm)
60-GB (5400-rpm)
60-GB (4200-rpm)
40-GB (4200-rpm)
30-GB (4200-rpm)
350082-001
336992-001
336991-001
336990-001
336989-001
350081-001
20
Modem board with cable
336999-001
21
Battery pack, 8-cell, 4.4-wH
336962-001
Maintenance and Service Guide
3–9
325388-002.book Page 10 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
3.3 Miscellaneous Plastics
Kit Components
Miscellaneous Plastics Kit Components
3–10
Maintenance and Service Guide
325388-002.book Page 11 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
Table 3-2
Miscellaneous Plastics Kit Components
Spare Part Number 350130-001
(contains parts with carbonite and platinum blue finish for use
with HP Pavilion zt3000 notebooks)
Spare Part Number 338133-001
(contains parts with carbon finish for use with
HP Compaq nx7000 notebooks)
Spare Part Number 337009-001
(contains parts with silver finish for use with
Compaq Presario X1000 notebooks)
Item
Description
1
Switch cover
2
PC Card slot space saver
3
Docking connector cover
4
Notebook feet (7)
5
Hard drive cover
6
Hard drive shield
7
Hard drive connector
Maintenance and Service Guide
3–11
325388-002.book Page 12 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
3.4 Miscellaneous Cable Kit
Components
Miscellaneous Cable Kit Components
Table 3-3
Miscellaneous Cable Kit Components
Spare Part Number 336973-001
Item
Description
1
SD Card slot board cable
2
Speaker cover cable
3
Modem cable
3–12
Maintenance and Service Guide
325388-002.book Page 13 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
3.5 Miscellaneous Doors/Covers Kit
Components
Miscellaneous Doors/Covers Kit Components
Table 3-4
Miscellaneous Doors/Covers Kit Components
Spare Part Number 336984-001
Item
Description
1
RTC battery
2
RTC battery cover
3
Memory expansion compartment cover
4
Mini PCI compartment cover
Maintenance and Service Guide
3–13
325388-002.book Page 14 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
3.6 Mass Storage Devices
Mass Storage Devices
Table 3-5
Mass Storage Devices
Spare Part Number Information
Item
Description
1
Optical drives
Spare Part
Number
24X Max DVD-ROM/CD-RW combination drive
8X Max DVD-ROM drive
24X Max CD-ROM drive
DVD+RW drive
2
Hard drives (include hard drive bezel and frame)
80-GB (5400-rpm)
80-GB (4200-rpm)
60-GB (5400-rpm)
60-GB (4200-rpm)
40-GB (4200-rpm)
30-GB (4200-rpm)
USB diskette drive (not illustrated)
3–14
336987-001
336986-001
336985-001
345588-001
350082-001
336992-001
336991-001
336990-001
336989-001
350081-001
336988-001
Maintenance and Service Guide
325388-002.book Page 15 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
3.7 Miscellaneous
Table 3-6
Miscellaneous (not illustrated)
Spare Part Information
Description
Spare Part
Number
AC adapter
338136-001
Logo Kits
For use with HP Pavilion zt3000 notebooks
For use with HP Compaq nx7000 notebooks
For use with Compaq Presario X1000 notebooks
350125-001
336995-001
338135-001
Power cords
For use with HP Pavilion zt3000 notebooks
Asia Pacific
Australia
Belgium
Denmark
Europe
France
Germany
Greece
Hong Kong
Italy
Korea
Latin America
The
Netherlands
350055-371
350055-011
350055-181
350055-081
350055-021
350055-051
350055-041
350055-151
350055-AC1
350055-061
350055-AD1
350055-161
Norway
People’s
Republic
of China
Portugal
Saudi Arabia
Spain
Switzerland
Taiwan
Thailand
United Kingdom
United States
350055-091
350055-AA1
350055-131
350055-171
350055-071
350055-111
350055-AB1
350055-281
350055-031
350055-001
350055-331
Maintenance and Service Guide
3–15
325388-002.book Page 16 Friday, October 24, 2003 9:21 AM
Illustrated Parts Catalog
Table 3-6
Miscellaneous (not illustrated)
Spare Part Information (Continued)
Spare Part
Number
Description
Power cords
For use with HP Compaq nx7000 and Compaq Presario X1000 notebooks
Australia
Denmark
Europe/Middle
East/Africa
Italy
246959-011
246959-081
246959-021
246959-061
Japan
Korea
Switzerland
United Kingdom
United States
Screw Kit (includes the following screws; refer to
Appendix C, “Screw Listing,” for more information on
screw specifications and usage.)
■
■
■
■
Phillips M2.5×15.0 screw
Phillips M2.5×7.0 screw
Phillips M2.5×5.0 screw
Spring-loaded Phillips M2.0×9.0
screw
3–16
246959-291
246959-AD1
246959-AG1
246959-031
246959-001
337012-001
■ Phillips M2.5×3.5 screw
■ Phillips M2.5×3.0 screw
■ Phillips M2.0×3.0 screw
Maintenance and Service Guide
325388-002.book Page 1 Friday, October 24, 2003 9:21 AM
4
Removal and Replacement
Preliminaries
This chapter provides essential information for proper and safe
removal and replacement service.
4.1 Tools Required
You will need the following tools to complete the removal and
replacement procedures:
■
Magnetic screwdriver
■
Phillips P0 screwdriver
■
5.0-mm socket for system board standoffs
■
Flat-bladed screwdriver
■
Tool kit (includes connector removal tool, loopback plugs,
and case utility tool)
Maintenance and Service Guide
4–1
325388-002.book Page 2 Friday, October 24, 2003 9:21 AM
Removal and Replacement Preliminaries
4.2 Service Considerations
The following sections include some of the considerations that
you should keep in mind during disassembly and assembly
procedures.
you remove each subassembly from the notebook, place the
✎ As
subassembly (and all accompanying screws) away from the work
area to prevent damage.
Plastic Parts
Using excessive force during disassembly and reassembly can
damage plastic parts. Use care when handling the plastic parts.
Apply pressure only at the points designated in the maintenance
instructions.
Cables and Connectors
Ä
CAUTION: When servicing the notebook, ensure that cables are
placed in their proper locations during the reassembly process.
Improper cable placement can damage the notebook.
Cables must be handled with extreme care to avoid damage.
Apply only the tension required to unseat or seat the cables
during removal and insertion. Handle cables by the connector
whenever possible. In all cases, avoid bending, twisting, or
tearing cables. Ensure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or
replaced. Handle flex cables with extreme care; these cables
tear easily.
4–2
Maintenance and Service Guide
325388-002.book Page 3 Friday, October 24, 2003 9:21 AM
Removal and Replacement Preliminaries
4.3 Preventing Damage to
Removable Drives
Removable drives are fragile components that must be handled
with care. To prevent damage to the notebook, damage to a
removable drive, or loss of information, observe the following
precautions:
■
Before removing or inserting a hard drive, shut down the
notebook. If you are unsure whether the notebook is off or in
Hibernation, turn the notebook on, then shut it down.
■
Before removing a diskette drive or optical drive, ensure that
a diskette or disc is not in the drive. Ensure that the optical
drive tray is closed.
■
Before handling a drive, ensure that you are discharged of
static electricity. While handling a drive, avoid touching the
connector.
■
Handle drives on surfaces that have at least one inch of
shock-proof foam.
■
Avoid dropping drives from any height onto any surface.
■
After removing a hard drive, CD-ROM drive, or a diskette
drive, place it in a static-proof bag.
■
Avoid exposing a hard drive to products that have magnetic
fields, such as monitors or speakers.
■
Avoid exposing a drive to temperature extremes or liquids.
■
If a drive must be mailed, place the drive in a bubble pack
mailer or other suitable form of protective packaging and
label the package, “Fragile: Handle With Care.”
Maintenance and Service Guide
4–3
325388-002.book Page 4 Friday, October 24, 2003 9:21 AM
Removal and Replacement Preliminaries
4.4 Preventing Electrostatic Damage
Many electronic components are sensitive to electrostatic
discharge (ESD). Circuitry design and structure determine the
degree of sensitivity. Networks built into many integrated circuits
provide some protection, but in many cases, the discharge
contains enough power to alter device parameters or melt silicon
junctions.
A sudden discharge of static electricity from a finger or other
conductor can destroy static-sensitive devices or microcircuitry.
Often the spark is neither felt nor heard, but damage occurs.
An electronic device exposed to electrostatic discharge might not
be affected at all and can work perfectly throughout a normal
cycle. Or the device might function normally for a while, then
degrade in the internal layers, reducing its life expectancy.
4.5 Packaging and Transporting
Precautions
Use the following grounding precautions when packaging and
transporting equipment:
4–4
■
To avoid hand contact, transport products in static-safe
containers, such as tubes, bags, or boxes.
■
Protect all electrostatic-sensitive parts and assemblies with
conductive or approved containers or packaging.
■
Keep electrostatic-sensitive parts in their containers until the
parts arrive at static-free workstations.
■
Place items on a grounded surface before removing items
from their containers.
■
Always be properly grounded when touching a sensitive
component or assembly.
Maintenance and Service Guide
325388-002.book Page 5 Friday, October 24, 2003 9:21 AM
Removal and Replacement Preliminaries
■
Store reusable electrostatic-sensitive parts from assemblies in
protective packaging or nonconductive foam.
■
Use transporters and conveyors made of antistatic belts and
roller bushings. Ensure that mechanized equipment used for
moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not
possible, use an ionizer to dissipate electric charges.
4.6 Workstation Precautions
Use the following grounding precautions at workstations:
■
Cover the workstation with approved static-shielding material
(refer to Table 4-2).
■
Use a wrist strap connected to a properly grounded work
surface and use properly grounded tools and equipment.
■
Use conductive field service tools, such as cutters,
screwdrivers, and vacuums.
■
When using fixtures that must directly contact dissipative
surfaces, only use fixtures made of static-safe materials.
■
Keep the work area free of nonconductive materials, such as
ordinary plastic assembly aids and Styrofoam.
■
Handle electrostatic-sensitive components, parts, and
assemblies by the case or PCM laminate. Handle these items
only at static-free workstations.
■
Avoid contact with pins, leads, or circuitry.
■
Turn off power and input signals before inserting or removing
connectors or test equipment.
Maintenance and Service Guide
4–5
325388-002.book Page 6 Friday, October 24, 2003 9:21 AM
Removal and Replacement Preliminaries
4.7 Grounding Equipment and
Methods
Grounding equipment must include either a wrist strap or a foot
strap at a grounded workstation.
■
When seated, wear a wrist strap connected to a grounded
system. Wrist straps are flexible straps with a minimum of
one megohm ±10% resistance in the ground cords. To
provide proper ground, wear a strap snugly against the skin
at all times. On grounded mats with banana-plug connectors,
use alligator clips to connect a wrist strap.
■
When standing, use foot straps and a grounded floor mat.
Foot straps (heel, toe, or boot straps) can be used at standing
workstations and are compatible with most types of shoes
or boots. On conductive floors or dissipative floor mats, use
foot straps on both feet with a minimum of one megohm
resistance between the operator and ground. To be effective,
the conductive strips must be worn in contact with the skin.
Other grounding equipment recommended for use in preventing
electrostatic damage includes:
4–6
■
Antistatic tape
■
Antistatic smocks, aprons, and sleeve protectors
■
Conductive bins and other assembly or soldering aids
■
Nonconductive foam
■
Conductive tabletop workstations with ground cords of
one megohm resistance
■
Static-dissipative tables or floor mats with hard ties to
the ground
■
Field service kits
■
Static awareness labels
■
Material-handling packages
■
Nonconductive plastic bags, tubes, or boxes
Maintenance and Service Guide
325388-002.book Page 7 Friday, October 24, 2003 9:21 AM
Removal and Replacement Preliminaries
■
Metal tote boxes
■
Electrostatic voltage levels and protective materials
Table 4-1 shows how humidity affects the electrostatic voltage
levels generated by different activities.
Table 4-1
Typical Electrostatic Voltage Levels
Relative Humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
✎
A product can be degraded by as little as 700 V.
Table 4-2 lists the shielding protection provided by antistatic bags
and floor mats.
Table 4-2
Static-Shielding Materials
Material
Use
Voltage Protection Level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Maintenance and Service Guide
4–7
325388-002.book Page 1 Friday, October 24, 2003 9:21 AM
5
Removal and Replacement
Procedures
This chapter provides removal and replacement procedures.
There are 50 Phillips screws, in nine different sizes, that must be
removed, replaced, and/or loosened when servicing the notebook.
Make special note of each screw size and location during removal
and replacement.
Refer to Appendix C, “Screw Listing,” for detailed information
on screw sizes, locations, and usage.
Maintenance and Service Guide
5–1
325388-002.book Page 2 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.1 Serial Number
Report the notebook serial number to HP when requesting
information or ordering spare parts. The serial number is located
on the bottom of the notebook.
Serial Number Location
5–2
Maintenance and Service Guide
325388-002.book Page 3 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.2 Disassembly Sequence Chart
Use the following chart to determine the section number to be
referenced when removing notebook components.
Disassembly Sequence Chart
Section
Description
5.3
Preparing the notebook for disassembly
# of Screws
Removed
Battery pack
0
Hard drive
2
Hard drive cover and shield
4
5.4
Notebook feet
0
5.5
Memory expansion board
1
5.6
Mini PCI communications board
1
5.7
RTC battery
0
5.8
Optical drive
1
5.9
Keyboard
2
5.10
Switch cover
0
5.11
Speaker cover
4
5.12
Fan
1
5.13
Heat sink
4
5.14
Processor
0
5.15
Display assembly
7
5.16
Top cover
16
5.17
Bluetooth board
2
5.18
SD Card slot board and cable
2
5.19
VGA board and shield
2
5.20
Modem board and cable
0
5.21
System board
1
Maintenance and Service Guide
5–3
325388-002.book Page 4 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.3 Preparing the Notebook for
Disassembly
Before you begin any removal or installation procedures:
1. Save your work, exit all applications, and shut down the
notebook. If you are not sure whether the notebook is off or
in Hibernation, briefly press the power button. If your work
returns to the screen, save your work, exit all applications,
and then shut down the notebook.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Remove the battery pack by following these steps:
Spare Part Number Information
Battery pack, 8-cell, 4.4-wH
336962-001
a. Turn the notebook upside down, with the rear panel
facing you.
5–4
Maintenance and Service Guide
325388-002.book Page 5 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
b. Slide and hold 1 the battery release latch to the right. The
front edge of the battery pack releases from the notebook.
c. Lift the front edge of the battery pack up and swing it
back 2.
Removing the Battery Pack
d. Remove the battery pack.
Reverse the above procedure to install the battery pack.
Maintenance and Service Guide
5–5
325388-002.book Page 6 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
Spare Part Number Information
Hard drives (hard drive cover, shield, and connector included with
hard drive and in Miscellaneous Plastics Kits)
80-GB (5400-rpm)
80-GB (4200-rpm)
60-GB (5400-rpm)
60-GB (4200-rpm)
40-GB (4200-rpm)
30-GB (4200-rpm)
350082-001
336992-001
336991-001
336990-001
336989-001
350081-001
5. Remove the hard drive by following these steps:
a. Turn the notebook upside down, with the front
facing you.
b. Remove the two PM2.5×9.5 screws 1 that secure the
hard drive to the notebook.
c. Use the notch 2 on the hard drive cover to lift the rear
edge of the hard drive up and swing it forward 3.
Removing the Hard Drive
d. Remove the hard drive.
5–6
Maintenance and Service Guide
325388-002.book Page 7 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
Ä
CAUTION: The hard drive cover should be removed only if it is
damaged and must be replaced. Unnecessarily removing the cover can
result in damage to the cover and hard drive and loss of information.
e. Remove the four PM2.5×3.5 screws 1 that secure the
hard drive to the hard drive cover and shield.
f.
Remove the hard drive shield 2 and connector 3 from
the hard drive.
g. Separate the hard drive from the hard drive cover 4.
Removing the Hard Drive from the Hard Drive Cover
hard drive cover, shield, and connector are included with the
✎ The
hard drive and also in the Miscellaneous Plastics Kits, spare part
number 350130-001 for HP Pavilion zt3000 models, spare part
number 338133-001 for HP Compaq nx7000 models, and spare
part number 337009-001 for Compaq Presario X1000 models.
Reverse the above procedure to install the hard drive.
Maintenance and Service Guide
5–7
325388-002.book Page 8 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.4 Notebook Feet
The notebook feet are adhesive-backed rubber pads, and are
included in the Miscellaneous Plastics Kits, spare part number
350130-001 for HP Pavilion zt3000 models, spare part number
338133-001 for HP Compaq nx7000 models, and spare part
number 337009-001 for Compaq Presario X1000 models. The
notebook feet attach to the base enclosure as indicated in the
following illustration.
Replacing the Notebook Feet
5–8
Maintenance and Service Guide
325388-002.book Page 9 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.5 Memory Expansion Board
Spare Part Number Information
1024-MB DDR memory expansion board
512-MB DDR memory expansion board
256-MB DDR memory expansion board
128-MB DDR memory expansion board
336909-001
336998-001
336997-001
336996-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook upside down, with the front facing you.
3. Loosen the PM2.5×5.0 screw 1 that secures the memory
expansion compartment cover to the notebook.
4. Lift the front edge of the cover up 2 and swing it back.
Removing the Memory Expansion Compartment Cover
5. Remove the cover.
memory expansion compartment cover is included in the
✎ The
Miscellaneous Doors/Covers Kit, spare part number 336984-001.
Maintenance and Service Guide
5–9
325388-002.book Page 10 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
6. Spread the retaining tabs 1 that secure the memory
expansion board to the socket. The board rises up at
a 45-degree angle.
7. Pull the board away from the socket at a 45-degree angle 2.
Removing the Memory Expansion Board
Reverse the above procedure to install a memory expansion
board.
5–10
Maintenance and Service Guide
325388-002.book Page 11 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.6 Mini PCI Communications Board
Spare Part Number Information
Mini PCI 802.11b wireless LAN (ROW)
Mini PCI 802.11b wireless LAN (MOW)
Mini PCI 802.11g wireless LAN
336976-001
336977-001
350083-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook upside down, with the front facing you.
3. Loosen the PM2.5×5.0 screw 1 that secures the Mini PCI
compartment cover to the notebook.
4. Lift the rear edge of the cover up 2 and swing it forward.
Removing the Mini PCI Compartment Cover
5. Remove the cover.
Mini PCI compartment cover is included in the
✎ The
Miscellaneous Doors/Covers Kit, spare part number 336984-001.
Maintenance and Service Guide
5–11
325388-002.book Page 12 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
6. Disconnect the two antenna cables from the terminals on
the Mini PCI communications board 1. Note that the longer
of the two cables should be connected to the left antenna
terminal (marked “AUX”) and the shorter cable should be
connected to the right terminal (marked “MAIN”).
7. Spread the retaining tabs 2 that secure the memory
expansion board to the socket. The board rises up at
a 45-degree angle.
8. Pull the board away from the socket at a 45-degree angle 3.
Removing the Mini PCI Communications Board
Reverse the above procedure to install a Mini PCI
communications board.
5–12
Maintenance and Service Guide
325388-002.book Page 13 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.7 RTC Battery
RTC battery and RTC battery cover are included in the
✎ The
Miscellaneous Doors/Covers Kit, spare part number 336984-001.
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook upside down, with the front facing you.
3. Insert a flat-bladed tool into the notch 1 on the front edge
of the RTC battery cover and separate the front edge of the
cover from the notebook.
4. Remove the RTC battery from the socket on the system
board 2.
Removing the RTC battery
Reverse the above procedure to install an RTC battery.
Maintenance and Service Guide
5–13
325388-002.book Page 14 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.8 Optical Drive
Spare Part Number Information
24X Max DVD-ROM/CD-RW combination drive
8X Max DVD-ROM drive
24X Max CD-ROM drive
336987-001
336986-001
336985-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook upside down, with the front facing you.
3. Remove the PM2.5×9.5 screw 1 that secures the optical
drive to the notebook.
4. Insert a slender tool into the slot in the hard drive bay and
push to the right to disengage the optical drive from the
notebook 2.
Removing the Optical Drive
5. Remove the optical drive.
Reverse the above procedure to install an optical drive.
5–14
Maintenance and Service Guide
325388-002.book Page 15 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.9 Keyboard
Spare Part Number Information
Asia Pacific
Australia
Belgium
Denmark
France
Germany
Greece
Hong Kong
International
Italy
Korea
Latin America
337016-371
337016-011
337016-181
337016-081
337016-051
337016-041
337016-151
337016-AC1
337016-B31
337016-061
337016-AD1
337016-161
The Netherlands
Norway
People’s Republic
of China
Portugal
Saudi Arabia
Spain
Switzerland
Taiwan
Thailand
United Kingdom
United States
337016-331
337016-091
337016-AA1
337016-131
337016-171
337016-071
337016-111
337016-AB1
337016-281
337016-031
337016-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook upside down, with the front facing you.
3. Remove the two PM2.5×15.0 screws that secure the keyboard
to the base enclosure.
Removing the Keyboard Screws
Maintenance and Service Guide
5–15
325388-002.book Page 16 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
4. Turn the notebook right-side up with the front facing you.
5. Open the notebook.
6. Slide the four notches on the top edge of the keyboard
toward you.
Releasing the Keyboard
5–16
Maintenance and Service Guide
325388-002.book Page 17 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
7. Lift the rear edge of the keyboard, swing it up and forward 1,
and rest it on the top cover.
8. Release the ZIF connector 2 to which the keyboard cable
is attached and disconnect the keyboard cable 3 from the
system board.
Disconnecting the Keyboard Cable
9. Remove the keyboard.
Reverse the above procedure to install the keyboard.
After the keyboard is removed, the internal memory expansion
board connector is accessible. Refer to the “Memory Expansion
Board” section for instructions on removing the internal memory
expansion board.
Maintenance and Service Guide
5–17
325388-002.book Page 18 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.10 Switch Cover
switch cover is included in the Miscellaneous Plastics Kits,
✎ The
spare part number 350130-001 for HP Pavilion zt3000 models,
spare part number 338133-001 for HP Compaq nx7000 models,
and spare part number 337009-001 for Compaq Presario X1000
models.
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.9).
3. Insert a flat-bladed tool under the outside edges of the hinge
cover areas and lift up to disengage the left and right sides of
the cover from the notebook.
4. Remove the switch cover.
Removing the Switch Cover
Reverse the above procedure to install the switch cover.
5–18
Maintenance and Service Guide
325388-002.book Page 19 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.11 Speaker Cover
Spare Part Number Information
Speaker cover with cable
For use with HP Pavilion zt3000 notebooks
For use with HP Compaq nx7000 and
Compaq Presario X1000 notebooks
The speaker cover cable is also included in the Miscellaneous
Cable Kit, spare part number 336973-001.
350122-001
336973-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.9).
3. Remove the switch cover (Section 5.10).
4. Disconnect the audio cable 1 from the system board.
5. Remove the three PM2.5×5.0 screws 2 and the
PM2.5×3.0 screw 3 that secure the speaker cover to the
notebook.
Removing the Speaker Cover Screws
Maintenance and Service Guide
5–19
325388-002.book Page 20 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
6. Lift the left side of the speaker cover shield and swing it up
and slightly to the right 1.
7. Slide the speaker cover back 2 to disengage it from the
notebook.
8. Remove the speaker cover.
Removing the Speaker Cover
Reverse the above procedure to install the speaker cover.
5–20
Maintenance and Service Guide
325388-002.book Page 21 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.12 Fan
Spare Part Number Information
Fan
336993-001
The fan is also included with the heat sink, spare part number 337000-001.
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.9).
3. Remove the switch cover (Section 5.10).
4. Remove the speaker cover (Section 5.11).
5. Disconnect the fan cable 1 from the system board.
6. Remove the PM2.5×5.0 screw 2 that secures the fan
to the base enclosure.
7. Remove the fan 3.
Removing the Fan
Reverse the above procedure to install the fan.
Maintenance and Service Guide
5–21
325388-002.book Page 22 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.13 Heat Sink
Spare Part Number Information
Heat sink with fan
Thermal pad
337000-001
337001-001
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
❏
Keyboard (Section 5.9)
❏
Switch cover (Section 5.10)
❏
Speaker cover (Section 5.11)
❏
Fan (Section 5.12)
2. Remove the four PM2.0×9.0 spring-loaded shoulder
screws 1 that secure the heat sink to the notebook.
3. Lift the front edge of the heat sink 2 and slide the heat
sink out of the notebook at an angle 3.
Removing the Heat Sink
5–22
Maintenance and Service Guide
325388-002.book Page 23 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
clean any thermal grease residue from the heat sink 1
✎ Carefully
and processor surfaces 2 each time you remove the heat sink.
Apply new thermal grease to both surfaces.
Removing the Thermal Grease From the Heat Sink and Processor
Reverse the above procedure to install the heat sink.
Maintenance and Service Guide
5–23
325388-002.book Page 24 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.14 Processor
Spare Part Number Information
Mobile Intel Pentium 4 Processor-M, 1.7-GHz
Mobile Intel Pentium 4 Processor-M, 1.6-GHz
Mobile Intel Pentium 4 Processor-M, 1.5-GHz
Mobile Intel Pentium 4 Processor-M, 1.4-GHz
Mobile Intel Pentium 4 Processor-M, 1.3-GHz
345566-001
337011-001
337023-001
337024-001
337010-001
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
5–24
❏
Keyboard (Section 5.9)
❏
Switch cover (Section 5.10)
❏
Speaker cover (Section 5.11)
❏
Fan (Section 5.12)
❏
Heat sink (Section 5.13)
Maintenance and Service Guide
325388-002.book Page 25 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
2. Use a flat-bladed tool to turn the processor locking screw 1
one-quarter turn counterclockwise.
3. Lift the processor straight up 2 and remove it.
that the gold triangle 3 should be in the lower right corner
✎ Note
when installing the processor.
Removing the Processor
Reverse the above procedure to install the processor.
Maintenance and Service Guide
5–25
325388-002.book Page 26 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.15 Display Assembly
Spare Part Number Information
With carbonite and platinum blue finish for use with
HP Pavilion zt3000 notebooks
15.4-inch, WUXGA
15.4-inch, WSXGA+
15.4-inch, WXGA
350084-001
350127-001
350126-001
With carbon finish for use with HP Compaq nx7000 notebooks
15.4-inch, WUXGA
15.4-inch, WSXGA+
15.4-inch, WXGA
337006-001
337003-001
337008-001
With silver finish for use with Compaq Presario X1000
notebooks
15.4-inch, WUXGA
15.4-inch, WSXGA+
15.4-inch, WXGA
337005-001
337004-001
337007-001
Display inverter (includes four display rubber screw covers)
336994-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.9).
3. Remove the switch cover (Section 5.10).
5–26
Maintenance and Service Guide
325388-002.book Page 27 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
4. Remove the PM2.5×15.0 screw 1 that secures the display
cable to the base enclosure.
5. Disconnect the display video cable 2 from the system board.
Disconnecting the Display Cable
Maintenance and Service Guide
5–27
325388-002.book Page 28 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
6. Close the notebook and turn the notebook upside down, with
the rear panel facing you.
7. Remove the following screws:
❏
Two PM2.5×9.5 screws 1 that secure the display
assembly to the base enclosure through the bottom of hte
top cover
❏
Three PM2.5×7.0 screws 2 that secure the display
assembly to the base enclosure through the rear panel
❏
One PM2.5×5.0 screw 3 that secures the display
assembly to the base enclosure through the rear panel
Removing the Display Screws
5–28
Maintenance and Service Guide
325388-002.book Page 29 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
8. Turn the notebook right-side up with the front facing you.
9. Open the display to the fully upright position.
10. Lift the display assembly straight up and remove it.
Removing the Display Assembly
Reverse the above procedure to install the display assembly.
Maintenance and Service Guide
5–29
325388-002.book Page 30 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.16 Top Cover
Spare Part Number Information
Top cover (includes TouchPad and TouchPad shield)
For use with HP Pavilion zt3000 notebooks
For use with HP Compaq nx7000 and
Compaq Presario X1000 notebooks
350123-001
336983-001
replacing the top cover, determine if a Bluetooth board is
✎ When
installed in the defective top cover. If a board is installed, remove
it from the defective top cover and install it in the replacement top
cover. Refer to Section 5.17, “Bluetooth Board,” for instructions
on removing and installing a Bluetooth board.
1. Prepare the notebook for disassembly (Section 5.3).
2. Disconnect the wireless antenna cables from the Mini PCI
communications board (Section 5.6).
3. Remove the following components:
❏
Optical drive (Section 5.8)
❏
Keyboard (Section 5.9)
❏
Switch cover (Section 5.10)
❏
Speaker cover (Section 5.11)
❏
Display assembly (Section 5.15)
4. Turn the notebook upside down, with the front facing you.
5–30
Maintenance and Service Guide
325388-002.book Page 31 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5. Remove the following screws:
❏
Three PM2.5×9.5 screws 1 along the front edge of
the notebook
❏
Two PM2.5×5.0 screws 2 in the hard drive bay
❏
Six PM2.5×15.0 screws 3
❏
One PM2.5×9.5 screw 4 behind the hard drive bay
Removing the Top Cover Screws
Maintenance and Service Guide
5–31
325388-002.book Page 32 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
6. Turn the notebook right-side up with the rear panel
facing you.
7. Release the ZIF connector 1 to which the TouchPad cable
is attached and disconnect the TouchPad cable 2 from the
system board.
8. Route the two antenna cables 3 out of the hole in the system
board.
Disconnecting the TouchPad Cable and Routing the Wireless
Antenna Cables
5–32
Maintenance and Service Guide
325388-002.book Page 33 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
9. If connected, disconnect the Bluetooth board cable 1 from
the system board.
10. Disconnect the left 2 and right speaker cables 3 from the
system board.
Disconnecting the Bluetooth Wireless Module and
Speaker Cables
Maintenance and Service Guide
5–33
325388-002.book Page 34 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
11. Position the notebook so the front faces forward.
12. Remove the following screws:
❏
Two PM2.5×7.0 screws 1 that secure the top cover to the
base enclosure
❏
One PM2.0×3.0 screw 2 that secures the top cover and
modem to the base enclosure
❏
One PM2.5×5.0 screw 3 that secures the top cover to the
base enclosure above the USB connector
Removing the Top Cover Screws
5–34
Maintenance and Service Guide
325388-002.book Page 35 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
13. Lift the back edge of the top cover 1 and swing it forward to
disengage it from the base enclosure.
14. Remove the top cover 2.
Removing the Top Cover
Reverse the above procedure to install the top cover.
Maintenance and Service Guide
5–35
325388-002.book Page 36 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.17 Bluetooth Board
Spare Part Number Information
Bluetooth wireless communications board
338134-01
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
❏
Mini PCI communications board (Section 5.6)
❏
Optical drive (Section 5.8)
❏
Keyboard (Section 5.9)
❏
Switch cover (Section 5.10)
❏
Speaker cover (Section 5.11)
❏
Display assembly (Section 5.15)
❏
Top cover (Section 5.16)
2. Turn the top cover right-side up with the TouchPad
facing you.
5–36
Maintenance and Service Guide
325388-002.book Page 37 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
3. Disconnect the Bluetooth board cable 1 from the Bluetooth
board.
Bluetooth board cable is included in the Miscellaneous
✎ The
Cable Kit, spare part number 336973-001.
4. Remove the two PM1.5×3.0 screws 2 that secure the
Bluetooth board to the top cover.
5. Slide the Bluetooth board forward 3, then lift it up 4 and
remove it from the top cover.
Removing the Bluetooth Board
Reverse the above procedure to install the Bluetooth board.
Maintenance and Service Guide
5–37
325388-002.book Page 38 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.18 SD Card Slot Board and Cable
Spare Part Number Information
SD Card slot board with cable
336963-001
The SD Card slot board cable is also included in the Miscellaneous Cable Kit,
spare part number 336973-001.
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
5–38
❏
Mini PCI communications board (Section 5.6)
❏
Optical drive (Section 5.8)
❏
Keyboard (Section 5.9)
❏
Switch cover (Section 5.10)
❏
Speaker cover (Section 5.11)
❏
Display assembly (Section 5.15)
❏
Top cover (Section 5.16)
Maintenance and Service Guide
325388-002.book Page 39 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
2. Disconnect the SD Card slot board cable 1 from the system
board.
3. Remove the PM2.5×5.0 screw 2 that secures the SD Card
slot board to the notebook.
4. Remove the PM2.5×5.0 screw 3 that secures the SD Card
slot board cable ground loop to the notebook.
5. Remove the SD Card slot board and cable.
Removing the SD Card Slot Board and Cable
Reverse the above procedure to install the SD Card slot board
and cable.
Maintenance and Service Guide
5–39
325388-002.book Page 40 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.19 VGA Board and Shield
Spare Part Number Information
VGA boards (include thermal pads)
For use with HP Pavilion zt3000 notebooks
ATI MOBILITY RADEON 9200 with 64-MB video memory
ATI MOBILITY RADEON 9200 with 32-MB video memory
350129-001
350128-001
For use with HP Compaq nx7000 and
Compaq Presario X1000 notebooks
ATI MOBILITY RADEON 9200 with 64 -MB video memory
ATI MOBILITY RADEON 9200 with 32-MB video memory
ATI MOBILITY RADEON 7500c with 32-MB video memory
336970-001
336969-001
336968-001
VGA board shield (includes thermal pads)
337017-001
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
5–40
❏
Mini PCI communications board (Section 5.6)
❏
Optical drive (Section 5.8)
❏
Keyboard (Section 5.9)
❏
Switch cover (Section 5.10)
❏
Speaker cover (Section 5.11)
❏
Display assembly (Section 5.12)
❏
Top cover (Section 5.16)
Maintenance and Service Guide
325388-002.book Page 41 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
2. Remove the PM2.5×15.0 1 and PM2.0×3.0 2 screws that
secure the VGA board shield to the base enclosure.
3. Lift the upper left corner of the VGA board 3 to disconnect
it from the system board.
4. Remove the VGA board and shield 4.
5. Disengage the shield clips 5 to remove the VGA board from
the shield.
Removing the VGA Board and Shield
Maintenance and Service Guide
5–41
325388-002.book Page 42 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
6. The VGA shield thermal pad 1 and VGA board thermal
pad 2 assist in cooling the notebook. Inspect these pads
and replace if necessary each time the shield is removed.
Replacing the Thermal Pads on the VGA Board and Shield
Reverse the above procedure to install the VGA board and shield.
5.20 Modem and Cable
Spare Part Number Information
Modem board with cable
336999-001
The modem board cable is also included in the Miscellaneous Cable Kit,
spare part number 3361973-001.
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
5–42
❏
Mini PCI communications board (Section 5.6)
❏
Optical drive (Section 5.8)
❏
Keyboard (Section 5.9)
❏
Switch cover (Section 5.10)
Maintenance and Service Guide
325388-002.book Page 43 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
❏
Speaker cover (Section 5.11)
❏
Display assembly (Section 5.15)
❏
Top cover (Section 5.16)
❏
VGA board and shield (Section 5.19)
2. Disconnect the modem cable 1 from the system board.
3. Lift the left side of the modem board 2 to disconnect it from
the system board.
4. Remove the modem board.
Removing the Modem Board and Cable
Reverse the above procedure to install the modem and cable.
Maintenance and Service Guide
5–43
325388-002.book Page 44 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
5.21 System Board
Spare Part Number Information
System board (includes thermal pads)
PC Card assembly (removal not documented)
336964-001
337014-001
replacing the system board, ensure that the following
✎ When
components are removed from the defective system board and
installed on the replacement system board:
■ Memory expansion boards (Section 5.5)
■ Mini PCI communications board (Section 5.6)
■ RTC battery (Section 5.7)
■ Processor (Section 5.14)
■ VGA board and shield (Section 5.19)
■ Modem and modem cable (Section 5.20)
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
5–44
❏
Optical drive (Section 5.8)
❏
Keyboard (Section 5.9)
❏
Switch cover (Section 5.10)
❏
Speaker cover (Section 5.11)
❏
Display assembly (Section 5.12)
❏
Top cover (Section 5.16)
Maintenance and Service Guide
325388-002.book Page 45 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
2. Disconnect the SD Card slot board cable 1 from the system
board.
3. Remove the PM2.5×5.0 screw 2 that secures the SD Card
slot board cable ground loop to the base enclosure and the
PM2.5×5.0 screw 3 that secures the system board to the base
enclosure.
Removing the System Board Screws
Maintenance and Service Guide
5–45
325388-002.book Page 46 Friday, October 24, 2003 9:21 AM
Removal and Replacement Procedures
4. Lift the right side of the system board approximately
1 inch 1. If necessary, flex the back edge of the base
enclosure out so that the parallel 2 and serial connectors 3
clear the base enclosure.
5. Slide the system board to the right at an angle 4.
6. Remove the system board.
Removing the System Board
Reverse the above procedure to install the system board.
5–46
Maintenance and Service Guide
325388-002.book Page 1 Friday, October 24, 2003 9:21 AM
6
Specifications
This chapter provides physical and performance specifications.
Table 6-1
Notebook
Dimensions
Height
Width
Depth
3.45 cm
25.40 cm
35.56 cm
1.4 in
10.0 in
14.0 in
Weight (varies by configuration)
2.95 kg
6.5 lbs
Stand-alone power requirements
Nominal operating
voltage
Average operating
power
Peak operating power
Power in Standby
mode
Power in Hibernation
mode
14.4 VDC
15.8 W
38.0 W
< 800 mW
< 100 mW
Temperature
Operating (not writing
optical)
Operating (writing
optical)
Nonoperating
0°C to 35°C
32°F to 95°F
5°C to 35°C
41°F to 95°F
-20°C to 60°C
-4°F to 140°F
Maintenance and Service Guide
6–1
325388-002.book Page 2 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-1
Notebook (Continued)
Relative humidity (noncondensing)
Operating
Nonoperating
10% to 90%
5% to 95%, 38.7°C (101.6°F) maximum wet bulb
temperature
Altitude (unpressurized)
Operating (14.7 to
10.1 psia)
Nonoperating (14.7 to
4.4 psia)
-15.24 to 3,048 m
-50 to 10,000 ft
-15.24 to 12,192 m
-50 to 40,000 ft
Shock
Operating
Nonoperating
✎
6–2
10 g, 11 ms, half-sine
175 g, 2 ms, half-sine
Applicable product safety standards specify thermal limits for plastic
surfaces. The notebook operates well within this range of
temperatures.
Maintenance and Service Guide
325388-002.book Page 3 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-2
15.4-inch, Wide UXGA, TFT Display
Dimensions
Height
Width
Diagonal
20.7 cm
33.1 cm
39.1 cm
Number of colors
up to 16.8 million
Contrast ratio
300:1
Brightness
170 nits typical
8.1 in
13.0 in
15.4 in
Pixel resolution
Pitch
Format
Configuration
0.173 × 0.173 mm
1920 × 1200
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Viewing angle
+/- 55° horizontal, +/- 45° vertical typical
Maintenance and Service Guide
6–3
325388-002.book Page 4 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-3
15.4-inch, Wide SXGA+, TFT Display
Dimensions
Height
Width
Diagonal
20.7 cm
33.1 cm
39.1 cm
Number of colors
up to 16.8 million
Contrast ratio
200:1
Brightness
180 nits typical
8.1 in
13.0 in
15.4 in
Pixel resolution
Pitch
Format
Configuration
0.197 × 0.197 mm
1680 × 1050
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Viewing angle
+/- 65° horizontal, +/- 50° vertical typical
6–4
Maintenance and Service Guide
325388-002.book Page 5 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-4
15.4-inch, Wide XGA+, TFT Display
Dimensions
Height
Width
Diagonal
20.7 cm
33.1 cm
39.1 cm
Number of colors
up to 16.8 million
Contrast ratio
200:1
Brightness
180 nits typical
8.1 in
13.0 in
15.4 in
Pixel resolution
Pitch
Format
Configuration
0.259 × 0.259 mm
1280 × 800
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Viewing angle
+/- 65° horizontal, +/- 50° vertical typical
Maintenance and Service Guide
6–5
325388-002.book Page 6 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-5
Hard Drives
User capacity
per drive1
80-GB
60-GB
(5400rpm)
60-GB
(4200rpm)
40-GB
80-GB
60-GB
40-GB
30-GB
9.5 mm
70 mm
99 g
9.5 mm
70 mm
102 g
9.5 mm
70 mm
99 g
9.5 mm
70 mm
99 g
ATA-5
ATA-5
ATA-5
ATA-5
100 MB/
sec
ATA security
100 MB/
sec
ATA security
100 MB/
sec
ATA security
100 MB/
sec
ATA security
Dimensions
Height
Width
Weight
Interface type
Transfer rate
Synchronous
(maximum)
Security
Seek times (typical read, including setting)
Single track
Average
Maximum
3 ms
13 ms
24 ms
3 ms
13 ms
24 ms
3 ms
13 ms
24 ms
3 ms
13 ms
24 ms
Logical blocks2
156,301,488
117,210,240
78,140,160
58,605,120
Disk rotational
speed
4200 rpm
5400 rpm
4200 rpm
4200 rpm
Operating
temperature
5°C to 55°C
(41°F to
131°F)
5°C to 55°C
(41°F to
131°F)
5°C to 55°C
(41°F to
131°F)
5°C to 55°C
(41°F to
131°F)
11
GB = 1,073,741,824 bytes.
drive specifications may differ slightly.
Certain restrictions and exclusions apply. Consult the HP Customer Support
Center for details.
2Actual
6–6
Maintenance and Service Guide
325388-002.book Page 7 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-6
External AC Adapter
Weight
.304 kg
0.67 lb
Power supply
Rated input voltage
Rated input current
Rated frequency
100 to 240 VAC RMS
1.7 A RMS
47 to 63 Hz
Table 6-7
8-cell, Primary Li-Ion Battery Pack
Dimensions
Height
Width
Depth
Weight
13.4 cm
9.2 cm
1.9 cm
.43 kg
5.25 in
3.63 in
.75 in
.96 lb
Energy
Voltage
Amp-hour capacity
Watt-hour capacity
14.8 V
4.4 aH
64 wH
Temperature
Operating
Nonoperating
0°C to 60°C
-20°C to 60°C
32°F to 140°F
-4°F to 104°F
Recharge time
System in off mode or
Standby
System on (depending
on system power
consumption)
Maintenance and Service Guide
2 to 3 hours
2 to 5 hours
6–7
325388-002.book Page 8 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-8
24X DVD/CD-RW Drive
Applicable disc
DVD-5, DVD-9, DVD-10
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R (read only)
CD Plus
Photo CD (single/multisession)
CD-Bridge
Center hole diameter
1.5 cm
0.59 in
12 cm
8 cm
4.72 in
3.15 in
Disc thickness
1.2 mm
0.047 in
Track pitch
0.74 µm
Disc diameter
Standard disc
Mini disc
Access time
Random
Full stroke
< 150 ms
< 225 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
128 KB/s
Data transfer rate
CD-R (24X)
CD-RW (10X)
CD-ROM (24X)
DVD (8X)
3600 KB/s (150 KB/s at 1X CD rate)
1500 KB/s (150 KB/s at 1X CD rate)
3600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1352 KB/s at 1X DVD rate)
16.6 MB/s
Multiword DMA mode 2
Startup time
< 15 seconds
Stop time
< 6 seconds
6–8
Maintenance and Service Guide
325388-002.book Page 9 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-9
24X CD-RW Drive
Applicable disc
DVD-5, DVD-9, DVD-10
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R (read only)
CD Plus
Photo CD (single/multisession)
CD-Bridge
Center hole diameter
1.5 cm
0.59 in
12 cm
8 cm
4.72 in
3.15 in
Disc thickness
1.2 mm
0.047 in
Track pitch
0.74 µm
Disc diameter
Standard disc
Mini disc
Access time
Random
Full stroke
< 150 ms
< 225 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
128 KB/s
Data transfer rate
CD-R (24X)
CD-RW (10X)
CD-ROM (24X)
DVD (8X)
3600 KB/s (150 KB/s at 1X CD rate)
1500 KB/s (150 KB/s at 1X CD rate)
3600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1352 KB/s at 1X DVD rate)
16.6 MB/s
Multiword DMA mode 2
Startup time
< 15 seconds
Stop time
< 6 seconds
Maintenance and Service Guide
6–9
325388-002.book Page 10 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-10
8X DVD-ROM Drive
Applicable disc
DVD-5, DVD-9, DVD-10
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R (read only)
CD Plus
Photo CD (single/multisession)
CD-Bridge
Center hole diameter
1.5 cm
0.59 in
12 cm
8 cm
4.72 in
3.15 in
Disc thickness
1.2 mm
0.047 in
Track pitch
0.74 µm
Disc diameter
Standard disc
Mini disc
Access time
Random DVD media
Full stroke DVD media
Random CD media
Full stroke CD media
< 150 ms
< 225 ms
< 110 ms
< 200 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
512 KB/s
Data transfer rate
Max 24X CD
Max 8X DVD
3600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1352 KB/s at 1X DVD rate)
16.6 MB/s
Multiword DMA mode 2
Startup time
< 10 seconds
Stop time
< 3 seconds
6–10
Maintenance and Service Guide
325388-002.book Page 11 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-11
24X CD-ROM Drive
Applicable disc
DVD-5, DVD-9, DVD-10
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R (read only)
CD Plus
Photo CD (single/multisession)
CD-Bridge
Center hole diameter
1.5 cm
0.59 in
12 cm
8 cm
4.72 in
3.15 in
Disc thickness
1.2 mm
0.047 in
Track pitch
1.6 µm
Disc diameter
Standard disc
Mini disc
Access time
Random
Full stroke
< 150 ms
< 300 ms
Audio output level
Line-out, 0.7 Vrms
Cache buffer
128 KB/s
Data transfer rate
Sustained (16X)
Variable
Multiword DMA mode 2
2400 KB/s
1500 to 3600 KB/s (10X to 24X)
16.6 MB/s
Startup time
< 8 seconds
Stop time
< 4 seconds
Maintenance and Service Guide
6–11
325388-002.book Page 12 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-12
System DMA
Hardware
DMA
System
Function
DMA0
Available for audio
DMA1*
Entertainment audio
(default; alternate = DMA0, DMA3, none)
DMA2*
Diskette drive
DMA3
ECP parallel port LPT1
(default; alternate = DMA0, none)
DMA4
DMA controller cascading (not available)
DMA5*
Available for PC Card
DMA6
Not assigned
DMA7
Not assigned
*PC Card controller can use DMA 1, 2, or 5.
6–12
Maintenance and Service Guide
325388-002.book Page 13 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-13
System Interrupts
Hardware
IRQ
System
Function
IRQ0
System timer
IRQ1
Keyboard controller
IRQ2
Cascaded
IRQ3
COM2
IRQ4
COM1
IRQ5
Audio (default)*
IRQ6
Diskette drive
IRQ7
Parallel port
IRQ8
Real time clock (RTC)
IRQ9
Infrared
IRQ10
System use
IRQ11
System use
IRQ12
Internal pointing stick or external mouse
IRQ13
Coprocessor (not available to any peripheral)
IRQ14
IDE interface (hard drive and optical drive)
IRQ15
System use
✎
PC Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10,
IRQ11, or IRQ15. Either the infrared or the serial port may
assert IRQ3 or IRQ4.
*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9,
IRQ10, or none.
Maintenance and Service Guide
6–13
325388-002.book Page 14 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-14
System I/O Addresses
I/O Address
(hex)
System Function
(shipping configuration)
000 - 00F
DMA controller no. 1
010 - 01F
Unused
020 - 021
Interrupt controller no. 1
022 - 024
Opti chipset configuration registers
025 - 03F
Unused
02E - 02F
87334 “Super I/O” configuration for CPU
040 - 05F
Counter/timer registers
044 - 05F
Unused
060
Keyboard controller
061
Port B
062 - 063
Unused
064
Keyboard controller
065 - 06F
Unused
070 - 071
NMI enable/real time clock (RTC)
072 - 07F
Unused
080 - 08F
DMA page registers
090 - 091
Unused
092
Port A
093 - 09F
Unused
0A0 - 0A1
Interrupt controller no. 2
6–14
Maintenance and Service Guide
325388-002.book Page 15 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-14
System I/O Addresses (Continued)
I/O Address
(hex)
System Function
(shipping configuration)
0A2 - 0BF
Unused
0C0 - 0DF
DMA controller no. 2
0E0 - 0EF
Unused
0F0 - 0F1
Coprocessor busy clear/reset
0F2 - 0FF
Unused
100 - 16F
Unused
170 - 177
Secondary fixed disk controller
178 - 1EF
Unused
1F0 - 1F7
Primary fixed disk controller
1F8 - 200
Unused
201
Joystick (decoded in ESS1688)
202 - 21F
Unused
220 - 22F
Entertainment audio
230 - 26D
Unused
26E - 26
Unused
278 - 27F
Unused
280 - 2AB
Unused
2A0 - 2A7
Unused
2A8 - 2E7
Unused
2E8 - 2EF
Reserved serial port
Maintenance and Service Guide
6–15
325388-002.book Page 16 Friday, October 24, 2003 9:21 AM
Specifications
Table 6-14
System I/O Addresses (Continued)
I/O Address
(hex)
System Function
(shipping configuration)
2F0 - 2F7
Unused
2F8 - 2FF
Infrared port
300 - 31F
Unused
320 - 36F
Unused
370 - 377
Secondary diskette drive controller
378 - 37F
Parallel port (LPT1/default)
380 - 387
Unused
388 - 38B
FM synthesizer—OPL3
38C - 3AF
Unused
3B0 - 3BB
VGA
3BC - 3BF
Reserved (parallel port/no EPP support)
3C0 - 3DF
VGA
3E0 - 3E1
PC Card controller in CPU
3E2 - 3E3
Unused
3E8 - 3EF
Internal modem
3F0 - 3F7
“A” diskette controller
3F8 - 3FF
Serial port (COM1/default)
CF8 - CFB
PCI configuration index register (PCIDIVO-1)
CFC - CFF
PCI configuration data register (PCIDIVO-1)
6–16
Maintenance and Service Guide
325388-002.book Page 1 Friday, October 24, 2003 9:21 AM
A
Connector Pin Assignments
Table A-1
RJ-45 Network Interface
1 3 5 7
2 4 6 8
Pin
Signal
Pin
Signal
1
Transmit +
5
Unused
2
Transmit –
6
Receive –
3
Receive +
7
Unused
4
Unused
8
Unused
Maintenance and Service Guide
A–1
325388-002.book Page 2 Friday, October 24, 2003 9:21 AM
Connector Pin Assignments
Table A-2
RJ-11 Modem
Pin
Signal
Pin
Signal
1
Unused
4
Unused
2
Tip
5
Unused
3
Ring
6
Unused
Table A-3
Universal Serial Bus
Pin
Signal
Pin
Signal
1
+5 VDC
3
Data +
2
Data –
4
Ground
Table A-4
S-Video
4
3
2
1
Pin
Signal
Pin
Signal
1
Ground (Y)
3
Y-Luminance (Intensity)
2
Ground (C)
4
C-Chrominance (Color)
A–2
Maintenance and Service Guide
325388-002.book Page 3 Friday, October 24, 2003 9:21 AM
Connector Pin Assignments
Table A-5
External Monitor
11
15
6
10
1
5
Pin
Signal
Pin
Signal
1
Red analog
9
+5 VDC
2
Green analog
10
Ground
3
Blue analog
11
Monitor detect
4
Not connected
12
DDC 2B data
5
Ground
13
Horizontal sync
6
Ground analog
14
Vertical sync
7
Ground analog
15
DDC 2B clock
8
Ground analog
Maintenance and Service Guide
A–3
325388-002.book Page 4 Friday, October 24, 2003 9:21 AM
Connector Pin Assignments
Table A-6
Audio Line-Out
1
2
Pin
Signal
Pin
Signal
1
Audio out
2
Ground
Table A-7
Microphone
1
2
Pin
Signal
Pin
Signal
1
Audio in
2
Ground
A–4
Maintenance and Service Guide
325388-002.book Page 5 Friday, October 24, 2003 9:21 AM
Connector Pin Assignments
Table A-8
Parallel
Pin
Signal
Pin
Signal
1
Strobe
14
Auto Linefeed
2
Data Bit 0
15
Error
3
Data Bit 1
16
Initialize Printer
4
Data Bit 2
17
Select In
5
Data Bit 3
18
Ground
6
Data Bit 4
19
Ground
7
Data Bit 5
20
Ground
8
Data Bit 6
21
Ground
9
Data Bit 7
22
Ground
10
Acknowledge
23
Ground
11
Busy
24
Ground
12
Paper End
25
Ground
13
Select
Maintenance and Service Guide
A–5
325388-002.book Page 1 Friday, October 24, 2003 9:21 AM
B
Power Cord Set Requirements
3-Conductor Power Cord Set
The wide range input feature of the notebook permits it to operate
from any line voltage from 100 to 120 or 220 to 240 volts AC.
The power cord set included with the notebook meets the
requirements for use in the country where the equipment is
purchased.
Power cord sets for use in other countries must meet the
requirements of the country where the notebook is used. For
more information on power cord set requirements, contact an
HP authorized reseller or service provider.
General Requirements
The following requirements are applicable to all countries:
■
The length of the power cord set must be at least 1.5 meters
(5 feet) and a maximum of 2 meters (6.50 feet).
■
All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
■
The power cord set must have a minimum current capacity of
10 amps and a nominal voltage rating of 125 or 250 volts AC,
as required by each country’s power system.
■
The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet C13
connector for mating with the appliance inlet on the back of
the notebook.
Maintenance and Service Guide
B–1
325388-002.book Page 2 Friday, October 24, 2003 9:21 AM
Power Cord Set Requirements
Country-Specific Requirements
3-Conductor Power Cord Set Requirements
Country
Accredited Agency
Applicable Note
Number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
The Netherlands
KEMA
1
Norway
NEMKO
1
Sweden
SEMKO
1
Switzerland
SEV
1
B–2
Maintenance and Service Guide
325388-002.book Page 3 Friday, October 24, 2003 9:21 AM
Power Cord Set Requirements
3-Conductor Power Cord Set Requirements (Continued)
Country
Accredited Agency
Applicable Note
Number
United Kingdom
BSI
1
United States
UL
2
Notes
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm2
conductor size. Power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation
in the country where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark
and registration number in accordance with the Japanese Dentori Law.
The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm2
conductor size. The wall plug must be a two-pole grounding type with
a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
Maintenance and Service Guide
B–3
325388-002.book Page 1 Friday, October 24, 2003 9:21 AM
C
Screw Listing
This appendix provides specification and reference information
for the screws used in the notebook. All screws listed in this
appendix are available in the Miscellaneous Screw Kit, spare part
number 337012-001.
Maintenance and Service Guide
C–1
325388-002.book Page 2 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-1
Phillips PM2.5×9.5 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
9
9.5 mm
2.5 mm
5.0 mm
Where used:
1 Two screws that secure the hard drive to the notebook
(documented in Section 5.3)
2 One screw that secures the optical drive to the notebook
(documented in Section 5.8)
3 Two screws that secure the display assembly to the notebook
(documented in Section 5.15)
Phillips PM2.5×9.5 Screw Locations
C–2
Maintenance and Service Guide
325388-002.book Page 3 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-1
Phillips PM2.5×9.5 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
9
9.5 mm
2.5 mm
5.0 mm
Where used:
Four screws that secure the top cover to the notebook
(documented in Section 5.16)
Phillips PM2.5×7.0 Screw Locations
Maintenance and Service Guide
C–3
325388-002.book Page 4 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-2
Phillips PM2.5×7.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
5
7.0 mm
2.5 mm
5.0 mm
Where used:
Three screws that secure the display assembly to the notebook through the
rear panel (documented in Section 5.15)
Phillips PM2.5×7.0 Screw Locations
C–4
Maintenance and Service Guide
325388-002.book Page 5 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-2
Phillips PM2.5×7.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
5
7.0 mm
2.5 mm
5.0 mm
Where used:
Two screws that secure the top cover to the notebook
(documented in Section 5.16)
Phillips PM2.5×7.0 Screw Locations
Maintenance and Service Guide
C–5
325388-002.book Page 6 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-3
Phillips PM2.5×3.5 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
4
3.5 mm
2.5 mm
5.0 mm
Where used:
Four screws that secure the hard drive to the hard drive cover and shield
(documented in Section 5.3)
Phillips PM2.5×3.5 Screw Locations
C–6
Maintenance and Service Guide
325388-002.book Page 7 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-4
Phillips PM2.5×5.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
13
5.0 mm
2.5 mm
5.0 mm
Where used:
1 One screw that secures the memory expansion compartment cover to the
notebook (documented in Section 5.5)
2 One screw that secures the Mini PCI compartment cover to the notebook
(documented in Section 5.6)
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide
C–7
325388-002.book Page 8 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-4
Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
13
5.0 mm
2.5 mm
5.0 mm
Where used:
1 Three screws that secure the speaker cover to the notebook
(documented in Section 5.11)
2 One screw that secures the fan to the notebook
(documented in Section 5.12)
Phillips PM2.5×5.0 Screw Locations
C–8
Maintenance and Service Guide
325388-002.book Page 9 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-4
Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
13
5.0 mm
2.5 mm
5.0 mm
Where used:
One screw that secures the display assembly to the notebook through the rear
panel (documented in Section 5.15)
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide
C–9
325388-002.book Page 10 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-4
Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
13
5.0 mm
2.5 mm
5.0 mm
Where used:
Two screws that secure the top cover to the notebook in the hard drive bay
(documented in Section 5.16)
Phillips PM2.5×5.0 Screw Locations
C–10
Maintenance and Service Guide
325388-002.book Page 11 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-4
Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
13
5.0 mm
2.5 mm
5.0 mm
Where used:
One screw that secures the top cover to the notebook
(documented in Section 5.16)
Phillips PM2.5×5.0 Screw Location
Maintenance and Service Guide
C–11
325388-002.book Page 12 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-4
Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
13
5.0 mm
2.5 mm
5.0 mm
Where used:
Two screws that secure the SD Card slot board and cable to the notebook
(documented in Section 5.18)
Phillips PM2.5×5.0 Screw Locations
C–12
Maintenance and Service Guide
325388-002.book Page 13 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-4
Phillips PM2.5×5.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
13
5.0 mm
2.5 mm
5.0 mm
Where used:
One screw that secures the system board to the notebook
(documented in Section 5.21)
Phillips PM2.5×5.0 Screw Location
Maintenance and Service Guide
C–13
325388-002.book Page 14 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-5
Phillips PM2.5×15.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
10
15.0 mm
2.5 mm
5.0 mm
Where used:
1 Two screws that secure the keyboard to the notebook
(documented in Section 5.9)
2 Six screws that secure the top cover to the notebook
(documented in Section 5.16)
Phillips PM2.5×15.0 Screw Locations
C–14
Maintenance and Service Guide
325388-002.book Page 15 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-5
Phillips PM2.5×15.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
10
15.0 mm
2.5 mm
5.0 mm
Where used:
One screw that secures the display assembly cable to the notebook
(documented in Section 5.15)
Phillips PM2.5×15.0 Screw Location
Maintenance and Service Guide
C–15
325388-002.book Page 16 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-5
Phillips PM2.5×15.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
10
15.0 mm
2.5 mm
5.0 mm
Where used:
One screw that secures the VGA shield to the notebook
(documented in Section 5.19)
Phillips PM2.5×15.0 Screw Location
C–16
Maintenance and Service Guide
325388-002.book Page 17 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-6
Phillips PM2.5×3.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
1
3.0 mm
2.5 mm
5.0 mm
Where used:
One screw that secures the speaker cover to the notebook
(documented in Section 5.11)
Phillips PM2.5×3.0 Screw Location
Maintenance and Service Guide
C–17
325388-002.book Page 18 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-7
Phillips PM2.0×3.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
2
3.0 mm
2.0 mm
4.0 mm
Where used:
1 One screw that secures the top cover to the notebook
(documented in Section 5.16)
2 One screw that secures the VGA shield to the notebook
(documented in Section 5.19)
Phillips PM2.0×3.0 Screw Locations
C–18
Maintenance and Service Guide
325388-002.book Page 19 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-8
Phillips PM2.0×9.0 Spring-Loaded Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
4
9.0 mm
2.0 mm
6.0 mm
Where used:
Four screws that secure the heat sink to the notebook
(documented in Section 5.13)
Phillips PM2.0×9.0 Spring-Loaded Screw Locations
Maintenance and Service Guide
C–19
325388-002.book Page 20 Friday, October 24, 2003 9:21 AM
Screw Listing
Table C-9
Phillips PM1.5×3.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
2
3.0 mm
1.5 mm
2.0 mm
Where used:
Two screws that secure the Bluetooth board to the top cover
(documented in Section 5.17)
Phillips PM1.5×3.0 Screw Locations
C–20
Maintenance and Service Guide
325388-002.book Page 1 Friday, October 24, 2003 9:21 AM
Index
1394 connector, location 1–29
802.11b wireless LAN, spare
part numbers 3–9, 5–11
A
AC adapter
spare part number 3–15
specifications 6–7
applications key, location
1–31
audio line-out jack
location 1–27
pin assignments A–4
audio troubleshooting 2–21
B
base enclosure, spare part
number 3–7
battery bay, location 1–35
battery pack
removal 5–4
spare part number 3–9
specifications 6–7
battery pack release latch,
location 1–35
Maintenance and Service Guide
Bluetooth wireless
communications board
removal 5–36
spare part number 3–5,
3–9, 5–11, 5–36
bottom components 1–34
C
cables, service considerations
4–2
caps lock light, location 1–33
CD-ROM drive
removal 5–14
spare part number 5–14
specifications 6–11
CD-RW drive, specifications
6–9
components
bottom 1–34
front 1–26
keyboard 1–30
left-side 1–26
rear panel 1–28
right-side 1–28
top 1–32
Index–1
325388-002.book Page 2 Friday, October 24, 2003 9:21 AM
Index
Computer Setup
Advanced Menu 2–5
File Menu 2–3
overview 2–1
Security Menu 2–4
connector pin assignments
audio line-out jack A–4
external monitor connector
A–3
microphone jack A–4
modem jack A–2
monitor connector A–3
network jack A–1
RJ-11 telephone jack A–2
RJ-45 network jack A–1
S-Video connector A–2
Universal Serial Bus (USB)
connector A–2
connectors, service
considerations 4–2
cursor control keys, location
1–31
D
design overview 1–36
Diagnostics for Windows 2–1
disassembly sequence chart
5–3
display assembly
removal 5–26
spare part numbers 3–3,
5–26
specifications 6–3, 6–4,
6–5
display inverter, spare part
number 3–3, 5–26
Index–2
display lid switch, location
1–33
display release latch, location
1–27
DMA specifications 6–12
docking connector cover 3–10
docking connector, location
1–35
drives, preventing damage 4–3
DVD-ROM drive
removal 5–14
spare part number 5–14
specifications 6–10
E
electrostatic discharge 4–4,
4–7
external monitor connector
location 1–29
pin assignments A–3
F
F1 through F12 function keys,
location 1–31
fan
removal 5–21
spare part number 3–7,
5–21
features 1–22
feet
illustrated 3–10
locations 5–8
Fn key, location 1–31
front components 1–26
Maintenance and Service Guide
325388-002.book Page 3 Friday, October 24, 2003 9:21 AM
Index
G
K
grounding equipment and
methods 4–6
keyboard
components 1–30
removal 5–15
spare part numbers 3–5,
5–15
troubleshooting 2–24
H
hard drive
OS loading problems 2–17
removal 5–6
spare part numbers 3–9,
3–14, 5–6
specifications 6–6
hard drive bay, location 1–35
hard drive connector,
illustrated 3–10
hard drive cover
illustrated 3–10
removal 5–7
hard drive shield
illustrated 3–10
removal 5–7
heat sink
removal 5–22
spare part number 3–7,
5–22
I
I/O address specifications
6–14
infrared port 1–28
internal keypad, location 1–31
interrupt specifications 6–13
Maintenance and Service Guide
L
left-side components 1–26
Logo Kit, spare part numbers
3–15
M
mass storage devices, spare
part numbers 3–14
memory expansion board
removal 5–9
spare part numbers 3–9
memory expansion
compartment cover
illustrated 3–13
location 1–35
removal 5–9
microphone jack
location 1–27
pin assignments A–4
Mini PCI communications
board
removal 5–11
spare part numbers 3–9,
5–11
Index–3
325388-002.book Page 4 Friday, October 24, 2003 9:21 AM
Index
Mini PCI compartment cover
illustrated 3–13
location 1–35
removal 5–11
Miscellaneous Cable Kit
components 3–5, 3–12
spare part number 3–5,
3–12, 3–13
Miscellaneous Doors/Covers
Kit
components 3–9
spare part number 3–9
Miscellaneous Plastics Kit
components 3–3, 3–10
spare part numbers 3–3,
3–11
models 1–2
modem
cable 3–12, 3–13
jack, pin assignments A–2
removal 5–42
spare part number 3–9,
5–42
troubleshooting 2–26
monitor connector
location 1–29
pin assignments A–3
mute button, location 1–33
N
network jack, pin assignments
A–1
network, troubleshooting 2–26
nonfunctioning device,
troubleshooting 2–15, 2–23
Index–4
notebook specifications 6–1
num lk key, location 1–31
num lock light, location 1–33
O
operating system loading,
troubleshooting 2–16
optical drive
location 1–27
removal 5–14
spare part numbers 3–5,
3–14, 5–14
P
packing precautions 4–4
parallel connector
location 1–29
pin assignments A–5
password, clearing 1–24
PC Card assembly, spare part
number 3–7
PC Card eject button, location
1–27
PC Card slot, location 1–27
PC Card space saver 3–10
plastic parts 4–2
pointing device,
troubleshooting 2–25
port replicator,
troubleshooting 2–15
power button 1–32
power connector 1–28
power cord, spare part
numbers 3–15, 3–16
power management features
1–25
Maintenance and Service Guide
325388-002.book Page 5 Friday, October 24, 2003 9:21 AM
Index
power, troubleshooting 2–9
processor
removal 5–24
spare part numbers 3–7,
5–24
R
rear panel components 1–28
removal
preliminaries 4–1
procedures 5–1
replacement
preliminaries 4–1
procedures 5–1
right-side components 1–28
RJ-11 telephone jack
location 1–29
pin assignments A–2
RJ-45 network jack
location 1–29
pin assignments A–1
RTC (real time clock) battery
illustrated 3–13
removal 5–13
RTC (real time clock) battery
cover
illustrated 3–13
location 1–34
S
Screw Kit, spare part number
3–16
SD Card slot board
removal 5–38
spare part number 3–7,
5–38
Maintenance and Service Guide
SD Card slot board cable 3–12,
3–13
SD Card slot, location 1–27
security cable slot, location
1–29
serial number 3–1, 5–2
service considerations 4–2
speaker cover
removal 5–19
spare part numbers 3–5,
5–19
speaker cover cable 3–12,
3–13
speakers, location 1–32
specifications
AC adapter 6–7
battery pack 6–7
CD-ROM drive 6–11
CD-RW drive 6–9
display 6–3, 6–4, 6–5
DMA 6–12
DVD-ROM drive 6–10
hard drive 6–6
I/O addresses 6–14
interrupts 6–13
notebook 6–1
static shielding materials 4–7
S-Video connector
location 1–29
pin assignments A–2
switch cover
illustrated 3–10
removal 5–18
Index–5
325388-002.book Page 6 Friday, October 24, 2003 9:21 AM
Index
overview 2–1
pointing device 2–25
port replicator 2–15
power 2–9
video 2–13
system board
removal 5–44
spare part number 3–7,
5–44
T
thermal pad
replacement 5–22
spare part number 3–7,
5–22
tools required 4–1
top components 1–32
top cover
removal 5–30
spare part numbers 3–5,
5–30
TouchPad buttons, location
1–33
TouchPad light, location 1–33
TouchPad on/off button,
location 1–33
TouchPad scroll zones,
location 1–33
TouchPad, location 1–33
transporting precautions 4–4
troubleshooting
audio 2–21
Computer Setup 2–2
flowcharts 2–7
keyboard 2–24
modem 2–26
network 2–26
nonfunctioning device
2–15, 2–23
operating system loading
2–16
Index–6
U
Universal Serial Bus (USB)
connector
location 1–29
pin assignments A–2
V
vent, location 1–29, 1–34
VGA board
removal 5–40
spare part numbers 3–7,
5–40
VGA board shield
removal 5–40
spare part number 3–7,
5–40
video troubleshooting 2–13
volume buttons, location 1–33
W
Windows logo key, location
1–31
wireless antenna
disconnection 5–12
spare part number 3–7
wireless device button,
location 1–27
workstation precautions 4–5
Maintenance and Service Guide
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising