Eizo | FlexScan MX300W | FlexScan MX-Series Brochure 2009

FlexScan MX-Series Brochure 2009
Clin ical Rev iew Mon ito r s
Selecting the Optimum Monitor for Clinical Review
Display Differs Depending Upon Grayscale Tones
Standard monitors for general office use have grayscale tone characteristics which may vary even between the same
models. In the medical field, monitors must display medical images accurately and consistently. Digital Imaging and
Communications in Medicine (DICOM) Part 14 specifies a display function for grayscale which is now used as a
standard to adjust the grayscale tone characteristics of monitors used in the medical field.
Medical Image
Grayscale Tones
Different Grayscale Tones
Gamma 2.2
DICOM Part 14
Log-Linear
CIE
Monitor A
Monitor B
Same Image Looks Different.
Cost - Efficiency Demanded Under Clinical Review Applications
Medical images can now be reviewed with clinical record applications. However, it is costly for hospitals to install
high-performance, DICOM calibration compatible medical display monitors throughout the entire hospital, and a cost-efficient
solution is demanded for clinical review application usage environment.
High - Performance
Medical Display Monitor
Cost - Efficient
Clinical Review Monitor
FlexScan MX-Series with Calibration to the DICOM Part 14 Compliant and Superior Cost Performance
Grayscale Tones
Grayscale
Self Brightness
Grayscale
Calibration
Brightness
Brightness
With the bundled RadiCS LE quality control software installed, a self-diagnosis function using a built-in backlight sensor
periodically checks the brightness of FlexScan MX-Series monitors. When a change in the brightness is detected, the
self-calibration function performs a simplified calibration compliant with the DICOM Part 14 standard to correct grayscale
tones and brightness of the monitor. Superior cost performance will be achieved when installing a large number of monitors
compliant to DICOM Part 14 in clinical review application usage environment.
DICOM Part 14
Grayscale
2
P03-05
76 cm [ 29.8" ] COLOR LCD MONITOR
61 cm [ 24.1" ] COLOR LCD MONITOR
Calibration compliant with the DICOM Part 14 standard.
Widescreen format with 16:10 aspect ratio gives you more horizontal space.
4 Megapixel Bezel-Less Widescreen
More Comfortable Working Space with Widescreen
Displaying 4 megapixel information volume on one monitor improves
your working efficiency and cost performance. No bezels in between
requires less eye movement
with less stress as compared
with dual 2 MP monitors.
With a 16:10 aspect ratio, you can view patient charts and DICOM
medical images with no overlap. The increased horizontal space this
affords means you can also view whole intestinal images along with the
navigation window.
2 MP Monitor
MX240W
Bezel-Less
518.4mm
432.0mm
DUE for Brightness Uniformity
2 MP Monitor
MX240W
The Digital Uniformity Equalizer (DUE) function provides optimum
backlight luminance uniformity which is considered difficult to attain
due to the characteristics of LCD monitors,
especially with larger screen sizes.
518.4mm
432.0mm
Without DUE
3
With DUE
[ MX240W Comparison ]
54 cm [ 21.3" ] COLOR LCD MONITOR
48 cm [ 19" ] COLOR LCD MONITOR
Calibration compliant with the DICOM Part 14 standard.
Ideal for viewing patient charts with MRI and CT medical images.
Brightness Stabilization
Outstanding Contrast Ratio
At startup or upon wakeup, the EIZO patented drift correction function
quickly stabilizes the brightness level. In addition, a sensor measures the
backlight brightness and compensates for brightness fluctuations caused
by the ambient temperature and the passage of time.
Makes images on dark backgrounds
appear more vivid, brings out the
subtle differences in similar shades
of color, and ensures that colors
retain their richness even in brightly
lit rooms.
This brightness stabilization function is EIZO patented technology
(Japan patent numbers 3171808 and 3193315, US patent number 6188380).
Low Contrast (Image)
High Contrast (Image)
Wide Viewing Angles
Brightness
Backside
of Panel
With Brightness stabilization
Preset Value
Wide Viewing angles with
minimal color shift when
viewed from the side.
Main Board
Hole for
Light
Transmission
Without Brightness stabilization
Minutes
178°
Backlight
Sensor
Image viewed from the side
4
Backlight Saver with Screen Saver
With ScreenManager Pro for Medical utility software installed, the
Backlight Saver function turns off the monitor ’s backlight when the
screen saver is activated, and turns it on again when the computer comes
out of screen saver mode. This function helps to reduce power consumption
when the monitor is used for a prolonged period of time.
Screen saver
activated
16 hours
/ day
18 hours
/ day
2 hours
Cuts power
consumption by 11%
Backlight
stays on
[ Without Backlight Saver ]
[ With Backlight Saver ]
Backlight Saver with Viewer Application
By setting the Backlight Saver function to operate with viewer application,
the monitor’ s backlight is on while the viewer is being used and the
backlight is off while the viewer is not being used.
Cuts power
consumption
[ Viewer in use ]
[ Viewer not in use ]
Ergonomic Design
Narrow bezels require less eye movement in a
multi-panel environment. The height and pivot
adjustable stand offers added flexibility and viewing
comfort.
Portrait Mode Support
RadiCS LE Quality Control Software Included
90° pivot for portrait mode gives you
versatility with images or applications
requiring more vertical viewing space.
The bundled RadiCS LE quality control software comes with a Status
Analyzer function which observes the monitor’s status. When the
self-diagnosis function detects a change in luminance, a warning icon
appears on the desktop taskbar enabling prompt detection and correction.
This reduces the time spent administering to the monitor.
Graphics board that supports portrait mode is required.
[ MX300W Usage Example ]
Calibration Mode Selection
Selectable with the front
panel buttons, the CAL
Switch function allows for
various calibration modes
of different modalities
such as CR, CT, and endoscope images. Furthermore,
auto mode settings can be
made with the Auto CAL
Switch function.
Normal
Warning
Full 5-Year Warranty
[ MX240W Usage Example ]
EIZO and its authorized distributors offer a five-year limited
warranty for all FlexScan MX-Series monitors.
5
P06-07
Quality Control Solutions
Monitor Quality Control Standards Compliance
More Precise Calibration with UX1 Sensor
Quality control tool RadiCS UX1 (sold separately) enables you to
perform basic quality checks necessary for clinical review monitors.
In addition, high-performance calibration compliant with the
DICOM Part 14 standard corrects the fluctuation in monitor quality.
By using the UX1 sensor (sold separately) with
t h e bundled RadiCS LE software, more precise
calibration compliant with the DICOM Part 14
standard can be performed.
Clip-On Swing Sensor
Once attached to the top of the monitor, the Clip-On Swing Sensor
G1 (sold separately) can remain in place and is ready for use. This
saves the time and trouble of attaching and removing it when
performing quality
control tasks.
Centralized Management of All Monitors
RadiNET Pro (sold separately) enables centralized
management of calibration tasks, history data
of multiple RadiCS clients via a network, and
remote QC functions.
Accessory Compatibility
Flexible Arm
LA -131- D
Wall Mount Arm
LA - 030 -W
LA - 011-W
Dual Height
Adjustable Stand
Panel Protector
LS - HM1- D
PANEL PROTECTOR
(MX300W-C :Built-In Panel Protector)
FP -2400W
FP -2101
FP - 702
Monitor Cleaning Kit
7
P08-09
Environment Awareness
EIZO Eco Products — A Commitment to Environmental Preservation over the Product Life Cycle
The development, implementation, and revision of the EIZO Eco Products internal environmental label stems from EIZO’s
longstanding commitment to manufacturing environmentally sound products as well as a desire to provide consumers with an
instantly recognizable means to assess their environmental performance. Based on the 3Rs (Reduce, Reuse, Recycle) and energy
savings, EIZO has introduced three versions of this label with EIZO Eco Products 2006 being the most recent.
EIZO Eco Products 2002
EIZO Eco Products 2004
EIZO Eco Products 2006
EIZO Eco Products 2006 Requirements
1 ) Power consumption less than 1 watt when turned off.
2 ) User’s manual made with chlorine-free, recycled paper.
3 ) Subject to an internal product environmental assessment.
4 ) Partial use of recycled plastic.
5 ) Power consumption less than two watts in power save mode.
6 ) Partial use of soy ink with supplied printed materials.
7 ) Use or partial use of plastic containing raw plant materials.
8 ) Use of recycled Styrofoam or paper in packaging cushioning materials.
9 ) Meets VOC (volatile organic compounds) guidelines for PCs as established by JEITA*.
10 ) Complies with the RoHS directive.
Previous versions of this label are EIZO Eco Products 2004 which covers the first six and EIZO Eco Products 2002 which
covers the first three requirements.
*JEITA is the Japan Electronics and Information Technology Industries Association. JEITA established guidelines to limit emission levels of VOCs from PCs. The guidelines are a
countermeasure against health hazards caused by VOC contaminants released from furniture, everyday objects, and building materials that accumulate indoors. EIZO carries out evaluations
based on these guidelines.
8
Monitor Specifications
76 cm [ 29.8 " ] Color LCD Monitor
61 cm [ 24.1 " ] Color LCD Monitor
54 cm [ 21.3 " ] Color LCD Monitor
48 cm [ 19 " ] Color LCD Monitor
Model Variations
MX300W: without Panel Protector
MX300W-C: with Panel Protector
-
-
-
Cabinet Color
Black
Black, Gray
Black, Gray
Black, Gray
Panel
TFT Color LCD Panel (VA)
TFT Color LCD Panel (VA)
TFT Color LCD Panel (VA)
TFT Color LCD Panel (VA)
Active Display Size (H × V)
641.3 × 400.8 mm
518.4 × 324.0 mm
432.0 × 324.0 mm
376.3 x 301.0 mm
Viewable Image Size
Diagonal: 756 mm
Diagonal: 611 mm
Diagonal: 540 mm
Diagonal: 481 mm
Native Resolution
2560 × 1600
1920 × 1200
1600 × 1200
1280 x 1024
Pixel Pitch
0.2505 × 0.2505 mm
0.270 × 0.270 mm
0.270 × 0.270 mm
0.294 x 0.294 mm
Display Colors
16.77 million from a palette of 1.06 billion colors
16.77 million from a palette of 1.06 billion colors
16.77 million from a palette of 1.06 billion colors
16.77 million from a palette of 1.06 billion colors
Viewing Angles (H, V)
178°, 178°
178°, 178°
178°, 178°
178°, 178°
Brightness
MX300W: 300 cd/m2 (typical)
MX300W-C: 265 cd/m2 (typical)
320 cd/m2 (typical)
300 cd/m2 (typical)
250 cd/m2 (typical)
Contrast Ratio
1000:1 (typical)
850:1 (typical)
1000:1 (typical)
1000:1 (typical)
On/Off Response Time
12 ms (typical)
16 ms (typical)
16 ms (typical)
20 ms (typical)
Midtone Response Time 1
6 ms (typical)
6 ms (typical)
8 ms (typical)
-
Scanning Frequency (H, V)
Digital: 31 - 100 kHz, 25.5 - 61 Hz (VGA Text:
69 - 71 Hz)
Frame synchronous mode: 59 - 61 Hz
Digital: 31 - 76 kHz, 59 - 61 Hz (VGA Text:
69 - 71 Hz)
Analog: 24 - 94 kHz, 49 - 86 Hz (1600 x 1200:
76 Hz, 1920 x 1200: 61 Hz)
Frame synchronous mode: 59 - 61 Hz
Digital: 31 - 76 kHz, 59 - 61 Hz (VGA Text:
69 - 71 Hz)
Analog: 24 - 80 kHz, 49 - 76 Hz (1600 x 1200:
61 Hz)
Frame synchronous mode: 59 - 61 Hz
Digital: 31 - 64 kHz, 59 - 61 Hz (VGA Text:
69 - 71 Hz)
Analog: 24.8 - 80 kHz, 50 - 75 Hz
Dot Clock
Digital: 269 MHz
Digital: 162 MHz, Analog: 202.5 MHz
Digital: 162 MHz, Analog: 162 MHz
Digital: 108 MHz, Analog: 135 MHz
Input Signals
DVI Standard 1.0
Digital: DVI Standard 1.0, Analog: RGB Analog
Digital: DVI Standard1.0, Analog: RGB Analog
Digital: DVI Standard 1.0, Analog: RGB Analog
Sync Formats
-
Separate, Composite
Separate, Composite
Separate
Input Terminal
DVI-D 24 pin × 2 (dual link supported by
Signal 1 only)
DVI-I 29 pin × 2
DVI-I 29 pin, D-Sub mini 15 pin
DVI-D 24 pin, D-Sub mini 15 pin
USB Ports
1 upstream, 2 downstream
1 upstream, 2 downstream
1 upstream, 2 downstream
1 upstream
USB Standard
Standard Rev. 2.0
Standard Rev. 2.0
Standard Rev. 2.0
Standard Rev. 2.0
Power Requirements
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz
Power Consumption
170 watts
110 watts
70 watts
45 watts
Power Save Mode
Less than 2 watts
Less than 2 watts
Less than 2 watts
Less than 0.8 watts
Sensor
Backlight Sensor
Backlight Sensor
Backlight Sensor
Backlight Sensor
Power Management
Digital: DVI DMPM
Digital: DVI DMPM, Analog: VESA DPMS
Digital: DVI DMPM, Analog: VESA DPMS
Digital: DVI DMPM, Analog: VESA DPMS
OSD Languages
English, German, French, Italian,
Japanese, Simplified Chinese, Spanish,
Swedish, Traditional Chinese
English, German, French, Italian,
Japanese, Simplified Chinese, Spanish,
Swedish, Traditional Chinese
English, German, French, Italian,
Japanese, Spanish, Swedish
English, German, French, Italian,
Japanese, Simplified Chinese, Spanish,
Swedish, Traditional Chinese
Net Weight
With Stand: MX300W 15.7 kg / MX300W-C
16.4 kg, Without Stand: MX300W 11.2 kg /
MX300W-C 11.9 kg
With Stand: 10.4 kg, Without Stand: 7.4 kg
With Stand: 9.7 kg, Without Stand: 6.7 kg
With Stand: 7.2 kg, Without Stand: 5.2 kg
Hole Spacing
VESA standard (100 × 100 mm)
VESA standard (100 × 100 mm)
VESA standard (100 × 100 mm)
VESA standard 100 x 100 mm
Certifications and Standards
TÜV/GM (EN60601-1), CE (Medical Device
Directive), CB (IEC60601-1), UL (cTÜVus),
CSA (cTÜVus), FCC-B, Canadian ICES003-B, c-Tick, FDA 510(k) 2, VCCI-B, EIZO
Eco Products 2006, CCC, RoHS
TCO'03, TÜV/Ergonomics (including ISO
13406-2), TÜV/GS, c-Tick, CE, CB, UL
(cTÜVus), CSA (cTÜVus), FCC-B,
Canadian ICES-003-B, TÜV/S, VCCI-B,
EPA ENERGY STAR ®, EIZO Eco Products
2006, CCC, RoHS
TCO'03, TÜV/Ergonomics (including ISO
13406-2), TÜV/GS, c-Tick, CE, CB, UL
(cTÜVus), CSA (cTÜVus), FCC-B,
Canadian ICES-003-B, TÜV/S, VCCI-B,
EPA ENERGY STAR ®, EIZO Eco Products
2006, CCC, RoHS
c-Tick, CE, CB, FCC-B, Canadian ICES-003-B,
TÜV/S, VCCI-B, EPA ENERGY STAR ® ,
EIZO Eco Products 2006, RoHS
Supplied Accessories
AC power cord, dual link signal cable
(DVI-D ~ DVI-D), signal cable ( DVI-D ~
DVI-D), USB cable, EIZO LCD Utility Disk
(user's manual, RadiCS LE, ScreenManager
Pro for Medical), ScreenCleaner (MX300W-C
only), warranty card
AC power cord, signal cables (DVI-D ~
DVI-D, DVI-I ~ D-Sub mini 15 pin), USB
cable, EIZO LCD Utility Disk (user's manual,
RadiCS LE, ScreenManager Pro for Medical),
warranty card
AC power cord, signal cables (DVI-D ~
DVI-D, D-Sub mini 15 pin ~ D-Sub mini 15
pin), USB cable, EIZO LCD Utility Disk
(user's manual, RadiCS LE, ScreenManager
Pro for Medical), warranty card
AC power cord, signal cables (DVI-D ~
DVI-D, D-Sub mini 15 pin ~ D-Sub mini 15
pin), USB cable, EIZO LCD Utility Disk
(user's manual, RadiCS LE, ScreenManager
Pro for Medical), warranty card
Warranty
Five Years
Five Years
Five Years
Five Years
response time measured between each grayscale level of 31, 63, 95, 127, 159, 191, and 223. 2 FlexScan MX-Series does not support the display of mammography images for diagnosis.
40°
Height
Adjustment
82
40°
465
434
254.7
Height
Adjustment
100
40°
64
42
325.5
208.5
406.5
240.3
303
334
90°
326
361
453
272.5
92
208.5
30°
61.5
38.5
405
378.4
90°
20.7
325.5
38
260.4
85
56.3
90°
57
405.6
566
520.4
73.3
Height
Adjustment
82
89
35°
61.5
35°
511.5
286.5
90°
90
402.8
450
51
301.5
643.3
326
367
689
118
433.5
Height
Adjustment
301.5
Dimensions [Unit:mm]
456
272.5
1 Average
50.3
320
205
9
H01-04-P02
Copyright © 2009 EIZO NANAO CORPORATION. All rights reserved. (090103) Printed in Japan, 1, 2009, 3.5K
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising