Extra Miles | UTRACK MVT600 | UTRACK SMS Protocol - Extra Miles Solutions Extra Miles Solutions

UTRACK SMS Protocol - Extra Miles Solutions Extra Miles Solutions
UTRACK SMS Protocol
Version 1.7
UTRACK® SMS Protocol
For MT90
MVT340 / MVT380 / MVT100 / MVT600 / T1 / T3
TC68 / TC68S/ MVT800
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
-1-
UTRACK SMS Protocol
Version 1.7
Contents
I.
Command Format .....................................................................................................................................................- 3 1.
SMS Format ...................................................................................................................................................- 3 2.
Description of Event Code and SMS Header ...............................................................................................- 4 II.
Command List ....................................................................................................................................................- 5 III.
Command Details ..............................................................................................................................................- 6 1.
Track on Demand – A00 ...............................................................................................................................- 6 2.
Track by T ime Interval (SMS) – A02.............................................................................................................- 7 3.
Track by Longitude and Latitude (SMS) —A10 ...........................................................................................- 7 4.
Track by T ime Interval (SMS) – A12.............................................................................................................- 7 5.
Track by Distance Interval – A14..................................................................................................................- 8 6.
Track Parking by T ime Interval (SMS)—A15 ...............................................................................................- 8 7.
Track Parking by T ime Interval on/off (SMS) – A16....................................................................................- 9 8.
Set GPRS – A21..............................................................................................................................................- 9 9.
Set DNS Server IP – A22 .............................................................................................................................- 10 10. Set Secondary GPRS Server – A23 .............................................................................................................- 10 11. Get all Authorized Phone Numbers – A70 ................................................................................................- 10 12. Authorize Multiple Functions Phone Number – A71 ...............................................................................- 10 13. Set Listen-in (Voice Monitoring) – A72......................................................................................................- 11 14. Set Sleep Mode – A73 ................................................................................................................................- 11 15. Get Authorized Phone Number and SMS Event Flag – B00 .....................................................................- 12 16. Authorize Phone Number and SMS Event Flag – B01 ..............................................................................- 12 17. Add SMS Event Flag to Authorized Phone Number – B02 .......................................................................- 12 18. Delete SMS Event Flag from Authorized Phone Number – B03 ..............................................................- 12 19. Set Geo-fence Alarm – B05 ........................................................................................................................- 13 20. Delete Geo-fence Waypoint – B06 ............................................................................................................- 13 21. Set Speeding Alarm – B07 ..........................................................................................................................- 13 22. Set Tow Alarm – B08...................................................................................................................................- 14 23. Set Tremble Sensitivity (MVT100/MVT340/MVT380/T1/T3) – B09 ........................................................- 14 24. Set Tremble Sensitivity (MVT600) – B20...................................................................................................- 14 25. Set Anti-theft – B21 ....................................................................................................................................- 15 26. Set Extended Functions – B31 ...................................................................................................................- 15 27. Set Log Interval –B34..................................................................................................................................- 15 28. T ime Zone Setting (for SMS Report) – B35 ...............................................................................................- 16 29. T ime Zone Setting (for GPRS Report) – B36..............................................................................................- 16 30. Set SMS Header for Event – B91 ................................................................................................................- 16 31. Output Control – C01..................................................................................................................................- 17 32. Protocol Control – C03 ...............................................................................................................................- 17 33. Set Delivery Mode of GPRS Buffer – C04 ..................................................................................................- 17 34. SMS Message Display – C11.......................................................................................................................- 18 35. Get Firmware Version and SN – E91..........................................................................................................- 18 36. Reboot GSM Module – F01 ........................................................................................................................- 18 37. Reboot GPS Module – F02 .........................................................................................................................- 18 38. Clear Journey and Running T ime – F06.....................................................................................................- 18 39. Set Mileage and Running T ime - F08 ........................................................................................................- 19 40. Delete SMS/GPRS Buffer – F09 ..................................................................................................................- 19 41. Initialization– F11........................................................................................................................................- 19 42. Change Password – F20..............................................................................................................................- 19 43. Initialize Password – FAB ............................................................................................................................- 20 -
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
-2-
UTRACK SMS Protocol
Version 1.7
I. Command Format
1.
SMS Format
From mobile phone (or SMS modem) to tracker:
Password,<command>,<data>
Note:
Password is 4 digits only and defaulted as 0000
From tracker to mobile phone (or SMS modem):
(1) SMS Get
IMEI,<command>,<data>
(2) Location Report
SMS header,<->yymmddHHMMSS,Z,G,speed, battery power balance, Google map link
Example:Now,110727,02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.0823
29&ie=UTF8&z=16&iwloc=addr&om=1
Description of SMS Data:
Parameter
Description
SMS Header
Type
of
Example
SMS
report,
Now
including normal report or means real time location report
kinds
of
alarm report.
Please refer
to
below:
Description of Event Code
and SMS Header
yymmddHHMMSS
Format YYMMDD hh:mm
110721 16:40
yy = year
=time: 16:40, 21 July, 2011
st
mm = month
dd = date
HH = hour
MM = minute
SS = second
Decimal
Z
G
GPS status indicator:
A = Valid
A = valid, V = invalid
GSM
signal.
Decimal
(0~31).
the
value
12
=GSM signal: 12
>16,
GPRS
will be sent successfully
Speed
Km/h. Decimal.
56
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
-3-
UTRACK SMS Protocol
Version 1.7
=56km/h
Back-up Battery
Back-up battery
97%
Power Balance
balance(percentage)
=battery balance:97%
Google Map
Google Maps Web Link
Now,110727,02:48,V,16,23Km/
WebLink
with
h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329
Latitude
and
Longitude which can be
&ie=UTF8&z=16&iwloc=addr&om=1
clicked and visited directly
lat=22.513015
on mobile phone.
lng= 114.057235
If your mobile cannot visit
HTTP websites, input the
latitude and longitude
into Google Maps
(maps.google.com)
2.
Description of Event Code and SMS Header
Event Code
1
Event
Input 1 Active (SOS pressed)
Default SMS Header
Default
(max 16 bytes)
GPRS Flag
SOS
Default SMS Flag
Default Picture Flag
Y
Y
Y
(Only for the first
authorized phone
number)
2
Input 2 Active
In2
Y
N
N
3
Input 3 Active
In3
Y
N
N
4
Input 4 Active
In4
Y
N
N
5
Input 5 Active
In5
Y
N
N
9
Input 1 Inactive(SOS released)
N
N
N
10
Input 2 Inactive
N
N
N
11
Input 3 Inactive
N
N
N
12
Input 4 Inactive
N
N
N
13
Input 5 Inactive
N
N
N
17
Low Battery
Low Battery
N
N
N/A
18
Low External Power
Low Power
N
N
N/A
19
Speeding
Speeding
Y
Y
N
20
Enter Geo-fence
Enter GEO
Y
Y
N
21
Exit Geo-fence
Exit GEO
Y
Y
N
22
External Power On
Power On
N
N
N
23
External Power Off
Power Off
N
N
N/A
24
No GPS Signal
No Fix
N
N
N/A
25
Get GPS Signal
F ix
N
N
N/A
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
-4-
UTRACK SMS Protocol
Version 1.7
26
Enter Sleep
Enter Sleep
N
N
N/A
27
Exit Sleep
Exit Sleep
N
N
N/A
28
GPS Antenna Cut
Antenna Cut
N
N
N
29
Device Reboot
Reboot
N
N
N/A
30
Impact
Impact
Y
N
N
33
Distance Interval Report
Distance
Y
N
N/A
34
Current Location Report
Now
A/A
A/A
N/A
35
Time Interval Report
Interval
A/A
A/A
N/A
36
Tow Alarm
Tow
Y
N
N
65
Press Input 1 (SOS) to Call
/
N/A
N
N/A
66
Press Input 2 to Call
/
N/A
N
N/A
67
Press Input 3 to Call
/
N/A
N
N/A
68
Press Input 4 to Call
/
N/A
N
N/A
69
Press Input 5 to Call
/
N/A
N
N/A
70
Reject Incoming Call
/
N/A
Y
N/A
71
Report Location after
/
N/A
Y
N/A
receiving an incomingcall
72
Auto Answer Incoming Call
/
N/A
N
N/A
73
Listen-in (voice monitoring)
/
N/A
N
N/A
Note:
1) Above figures are the factory default settings.
2)Y = yes; N = no; N/A = not applicable or not available; A/A = always stay available in all status and cannot be
changed.
3) You can use commands to define SMS header, add or delete flag for each function.
II.
Command List
Command
Definition
SMS/GPRS
Applicable Model
A00
Track on Demand
SMS
All
A02
Track by T ime Interval
SMS
All
A10
Track by Longitude and Latitude
SMS/GPRS
All
A12
Track by T ime Interval
GPRS
All
A14
Track by Distance Interval
SMS/GPRS
All
A15
Track Parking by T ime Interval
GPRS
MVT100/340/380/600/800/T1/T3
A16
Track Parking by T ime Interval on/off
GPRS
MVT100/340/380/600/800/T1/T3
A21
Set GPRS
SMS/GPRS
All
A22
Set DNS Server IP
SMS/GPRS
All
A23
Set Secondary GPRS Server
SMS/GPRS
All
A70
Get all Authorized Phone number
SMS/GPRS
All
A71
Set Multiple Functions Phone Number
SMS/GPRS
All
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
-5-
UTRACK SMS Protocol
Version 1.7
A72
Set Listen-in Phone Number
Call
All
A73
Set Sleep Mode
SMS/GPRS
All
B00
Get Authorized Phone Number and SMS Event Flag
SMS/GPRS
All
B01
Authorize Phone Number and SMS Event Flag
SMS/GPRS
All
B02
Add SMS Event Flag to Authorized Phone Number
SMS/GPRS
All
B03
Authorized SMS/GPRS
All
B05
Delete SMS Event
Phone
Set Geo-fence Alarm
SMS/GPRS
All
B06
Delete Geo-fence Waypoint
SMS/GPRS
All
B07
Set Speeding Alarm
SMS/GPRS
All
B08
Set Tow Alarm
SMS/GPRS
MVT100/340/380/600/800/T1/T3/MT90/TC68/TC68S
B09
Set Tremble Sensitivity (MVT100/MVT340/MVT380)
SMS/GPRS
MVT100/340/380/T1/T3
B20
Set Tremble Sensitivity (MVT600)
SMS/GPRS
MVT600
B21
Set Anti-theft
SMS/GPRS
MVT100/340/380/600/800/T1/T3
B31
Set Extended Functions
SMS/GPRS
All
B34
Set Log Interval
SMS/GPRS
MT90/ MVT100/380/600/800/T1/T3/TC68/TC68S
B35
T ime Zone Setting(For SMS Report)
SMS/GPRS
All
B36
T ime Zone Setting(For GPRS Report)
SMS/GPRS
All
B91
Set SMS Header for Event
SMS/GPRS
All
C01
Output Control
SMS/GPRS
MVT100/340/380/600/800/T1/T3
C03
Protocol Control
SMS/GPRS
All
C04
Set Delivery Mode of GPRS Buffer
GPRS
MT90,MVT100/380/600/800/T1/T3/TC68/TC68S
C11
SMS Message Display
SMS
MVT600/T1/T3
E91
Get F irmware Version and SN
SMS/GPRS
All
F01
Reboot GSM Module
SMS/GPRS
All
F02
Reboot GPS Module
SMS/GPRS
All
F06
Clear Journey and Running T ime
SMS/GPRS
All
F08
Set Mileage and Running T ime
SMS/GPRS
All
F09
Clear SMS/GPRS Buffer
SMS/GPRS
MT90,MVT100/380/600/800/T1/T3/TC68/TC68S
F11
Initialization
SMS/GPRS
All
F20
Change Password
SMS
All
FAB
Initialize Password
SMS
All
III.
1.
Flag
from
Command Details
Track on Demand– A00
SMS Set:
0000,A00
SMS Get:
Now,Date&T ime,PositionStatus,GSM Signal Level,Speed,BatteryLife,IP link
Description:
Get the current location report of the tracker.
Refer to Annex 1 for more information of data description.
Example
SMS Tx:
0000,A00
SMS Rx:
Now,110721 16:40,V,12,56Km/h,97% ,http://maps.meigps.com/?lat=22.513015&lng=114.057235
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
-6-
UTRACK SMS Protocol
2.
Version 1.7
Track by T ime Interval (SMS) – A02
SMS Set:
0000,A02,interval,times
SMS Get:
IMEI,A02,OK
Description:
interval =0, stop tracking by time interval (default);
interval = [1,65535], track by interval in minute.
times = 0, track by interval continuously;
times = [1,255], set how many times an SMS report is received from the tracker with the
defined interval.
Example
SMS Tx:
0000,A02,10,3
SMS Rx:
353358017784062,A02,OK
In this example, you can receive all 1 SMS with an interval of 10 minutes.
Interval,12080918:45,V,16,0Km/h,67%,http://maps.google.com/maps?f=q&hl=en&q=3.342336,0.000500&ie=UT
F8&z=16&iwloc=addr&om=1
3.
Track by Longitude and Latitude (SMS)
—A10
SMS Set:
0000,A10
SMS Get:
Now,,<->Latitude,<->
Longitude,Date
Satellites ,GSM Signal
Description:
and
T
ime,Status,Quantity
of
Level,Velocity,Direction,Positioning accuracy,Altitude,Mileage,T ime,,The Status of Input
and
Check thecurrent location, get the data by longitude and latitude. Set A10, if the GPRS works
Output,,
and the parameter is correct, the tracker will upload a location data of the form 34 to the
server.
It is for the user tracking by SMS.
Example
SMS Tx:
0000,A10
SMS Rx:
353358017784062,Now,22.535888,114.063034,080310161834,A,9,27,30,179,0,15,8890,1346
,,0000,,
4.
Track by T ime Interval (SMS) – A12
SMS Set:
0000,A12,interval,times
SMS Get:
IMEI,A12,OK
Description:
Interval is in unit of 10 seconds.
Interval = 0, stop tracking by time interval.
Max time interval = 65535*10 seconds
times = 0, track by interval continuously;
times = [1,65535], set how many times(reports) from the tracker with the specified interval.
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
-7-
UTRACK SMS Protocol
Version 1.7
Example
SMS Tx:
0000,A12,6,0
SMS Rx:
353358017784062,A12,OK
5.
Track by Distance Interval – A14
SMS Set:
0000,A14,distance
SMS Get:
IMEI,A14,OK
Description:
Distance = 0, stop tracking by distance interval (default);
Distance = [1, 4294967295], set interval in meter.
If Track by Distance Interval and Track by T ime Interval are both set, the GPS location report
complies with ‘First Reach First Report’ rule, and the interval for next report is immediately
re-calculated.
Example
SMS Tx:
0000,A14,1000
SMS Rx:
353358017784062,A14,OK
In this example, the below message will be received once distance changes over 1000 meters.
353358017784062,Distance,22.547278,114.047723,080310080934,A,7,21,30,88,1,12,8525,56
3,,0000,,
6.
Track Parking by T ime Interval (SMS)—A15
SMS Set:
0000,A15,Interval,T imes
SMS Get:
IMEI,A15,OK
Description:
This command is used for vehicle GPS tracker. Set the time interval, it is better reduce the
times of sending GPRS data, to save GPRS rate.
After setting A15, A16 will be set automatically. For more details of the engines status
(on/off), please refer to A16command as following.
Interval is in unit of 10 seconds.
Interval = 0, stop tracking by time interval.
Max time interval = 65535*10 seconds
T imes = 0, track by interval continuously (It is used for platform tracking, suggest setting as 0 )
T imes = [1,65535], set how many times reports will be received from the tracker within the
specified time interval.
Example
SMS Tx:
0000,A15,6,0
SMS Rx:
353358017784062,A15,OK
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
-8-
UTRACK SMS Protocol
7.
Version 1.7
Track Parking by T ime Interval on/off(SMS) – A16
SMS Set:
0000, A16,Status
SMS Get:
IMEI,A16,OK
Description:
This command is used for vehicle GPS tracker. The first positive input (HIGH) of vehicle tracker
should connect engine detection, or the function cannot work. The following are the first
positive input of different vehicle tracker:
Model
First Positive Input
MVT100
Input 2
MVT340
Input 2
MVT380
Input 4
MVT600
Input 3
T1
Input 3
T3
Input 3
Status = 1,track parking by time interval works; the GPRS data will be sent by the time interval
as below :
Engine On : GPRS data will be sent by the time interval of A12
Engine Off: GPRS data will be sent by the time interval of A15
Status = 0,track parking by time interval close; the GPRS data will be sent by the time interval
as below :
Engine On : GPRS data will be sent by the time interval of A12
Engine Off: GPRS data will be sent by the time interval of A12
Example
SMS Tx:
0000,A16,0
SMS Rx:
353358017784062,A16,OK
8.
Set GPRS – A21
SMS Set:
0000,A21,X,IP,Port,APN,APNusername,APN password
SMS Get:
IMEI,A21,OK
Description:
X = 0, close GPRS;
X = 1, open TCP;
X = 2, open UDP.
IP : IP address or domain name, max 32 bytes.
Port: max 5 bytes.
APN / APN username / APN password: max 32 bytes each;
If no username and password required, leave them blank.
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
-9-
UTRACK SMS Protocol
Version 1.7
Example
SMS Tx:
0000,A21,1,www.meigps.com,8500,CMNET,,
SMS Rx:
353358017784062,A21,OK
9.
Set DNS Server IP – A22
SMS Set:
0000,A22,DNS Server IP
SMS Get:
IMEI,A22,OK
Description:
Your servers IP is not properly set if the command A21 doesn’t work. You can first use this
command to set DNS Server IP (please check with your DNS server provider for the DNS
Server IP) and then redo command A21.
DNS Server IP: max 16 bytes
Example
SMS Tx:
0000,A22,202.1.2.30
SMS Rx:
353358017784062,A22,OK
10.
Set Secondary GPRS Server – A23
SMS Set:
0000,A23,IP,port
SMS Get:
IMEI,A23,OK
Description:
IP : max 32 bytes.
Port: max 5 bytes.
When the tracker fails to send data to the first server set by command A21, it will send data to
the secondary server to avoid data loss.
Example
SMS Tx:
0000,A23,112.91.12.222,8500
SMS Rx:
353358017784062,A23,OK
11.
Get all Authorized Phone Numbers– A70
SMS Set:
0000,A70
SMS Get:
IMEI,A70,SOS phone number 1,SOS phone number 2,SOS phone number 3,listen-in phone
number 1,listen-in phone number 2
Description:
Get all authorized phone number.
Example
SMS Tx:
0000,A70
SMS Rx:
353358017784062,A70,13811111111,13822222222,13833333333,13844444444,1385555555
5
12.
AuthorizeMultiple Functions Phone Number– A71
SMS Set:
0000,A71,phone number 1,phone number 2,phone number 3
SMS Get:
IMEI,A71,OK
Description:
Authorize a phone number for SOS alarm, calling for location report, geo-fence alarm, and low
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
- 10 -
UTRACK SMS Protocol
Version 1.7
battery alarm.
Phone Number: Max 16 characters.
If no preset phone number, it is empty (default).
Send command “0000, A71” to delete all phone numbers.
When you press theSOS button, the tracker will make a call to phone number 1, 2 and 3. It will
stop calling when one number answers.
Example
SMS Tx:
0000,A71,13811111111,13822222222,13833333333
SMS Rx:
353358017784062,A70,OK
13.
Set Listen-in (Voice Monitoring)– A72
SMS Set:
0000,A72,phone number 1,phone number 2
SMS Get:
IMEI,A72,OK
Description:
Authorize a phone number to make a silent call to the tracker.T he tracker willanswer the call
automatically which allows the caller to listen to what is happening around the tracker. There
is no voice indication that the call is in progress.
Phone Number: Max 2, 16 characters.
If no preset phone number, it is empty (default).
If no phone number but comma, the relevant number will be deleted.
Send command “0000, A72” to delete all phone numbers.
Example
SMS Tx:
0000,A72,13844444444,13855555555
SMS Rx:
353358017784062,A72,OK
14.
Set Sleep Mode – A73
SMS Set:
0000,A73,X
SMS Get:
IMEI,A73,OK
Description:
This setting is for power saving mode
X=0, turn off sleep mode (default)
X=1, normal sleep. GSM module work, GPS module work by sleep mode intermittently. The
device can work 25% longer than no sleep mode. Note: this is not recommended for users
who set “track by interval” or short time interval, because it will affect the completeness of
tracking.
X=2, deep sleep, the tracker will enter this mode after it is inactive or stationary(No SOS/any
triggered by the button/input/incoming calls/message/movement) for 5 minutes. GPS module
stops working and GSM module enters sleep mode. The tracker remains in this mode until it is
activated by SOS/any triggered by the button/input/incoming calls/message/movement. After
that, it will repeat above processes.
Note: MT90 can enter sleep mode under movement , and movement can't wake MT90 from
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
- 11 -
UTRACK SMS Protocol
Version 1.7
sleep mode.
In
any condition,
the device will directly quit
the sleep
mode and
back to
normal working mode by SMS or GPRS command to turn off the sleep mode.
Example
SMS Tx:
0000,A73,2
SMS Rx:
353358017784062,A73,OK
15.
Get Authorized Phone Number and SMS Event Flag – B00
Why is this section blue?
SMS Set:
0000,B00,P
SMS Get:
IMEI,B00,P,phone No,event code flag
Description:
P: 1 to 3
Phone No: max 16 characters. If Phone No is blank, no phone number is authorized.
Event Code Flag: 16+8 bytes, HEX String. See Annex 2 for more details.
Example
SMS Tx:
0000,B00,1
SMS Rx:
353358017784062,B00,1,13612345678,0000000000000F0A00000000
16.
Authorize Phone Number and SMS Event Flag – B01
SMS Set:
0000,B01,P,phone No,eventcode
SMS Get:
IMEI,B01,OK
Description:
P: 1 to 3.
Phone No: max 16 characters.
Event Code: If no codes stipulated, then it will apply the default flags to the authorized phone
number.
See Annex 2 for more details of Event Code and default settings.
Example
SMS Tx:
0000,B01,1,13612345678,1
SMS Rx:
353358017784062,B01,OK
17.
Add SMS Event Flag to Authorized Phone Number – B02
SMS Set:
0000,B02,P,event code
SMS Get:
IMEI,B02,OK
Description:
P : 1 to 3.
Event Code: please refer to Annex 2 for more details.
Example
SMS Tx:
0000,B02,1,17
SMS Rx:
353358017784062,B02,OK
18.
Delete SMS Event Flag from Authorized Phone Number – B03
SMS Set:
0000,B03,P,event code
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
- 12 -
UTRACK SMS Protocol
Version 1.7
SMS Get:
IMEI,B03,OK
Description:
P : 1 to 3.
Event Code: please refer to Annex 2 for more details.
Example
SMS Tx:
0000,B03,1,17
SMS Rx:
353358017784062,B03,OK
19.
Set Geo-fence Alarm – B05
SMS Set:
0000,B05,P,latitude,longitude,radius,in,out
SMS Get:
IMEI,B05,OK
Description:
P: 1 to 8. Max 8 Geo-fence waypoints can be set.
Latitude: Latitude in decimal degrees of the waypoint center; Accurate to 6 digits after the
decimal point, add 0 if less than 6 digits, or command will be rejected.
Longitude: Longitude in decimal degrees of the waypoint center; Accurate to 6 digits after the
decimal point, add 0 if less than 6 digits, or command will be rejected.
Radius: [1,4294967295] in meters.
In = 0, turn off the alarm when the tracker enters the waypoint;
In = 1, turn on the alarm when the tracker enters the waypoint.
Out = 0, turn off the alarm when the tracker exits the waypoint;
Out = 1, turn on the alarm when the tracker exits the waypoint.
Example
SMS Tx:
0000,B05,1, 22.913191,114.079882,1000,0,1
SMS Rx:
353358017784062,B05,OK
Once the tracker goes outside of the circle, (center: 22.913191,114.079882and radius 1000
meters) the following message will be received.
353358017784062,ExitGEO,22.918186,114.089823,080229123816,A,10,22,16,32,1,21,6667,85
0,,0000,,
20.
Delete Geo-fence Waypoint – B06
SMS Set:
0000,B06,P
SMS Get:
IMEI,B06,OK
Description:
P: 1 to 8. Only one waypoint can be deleted by each SMScommand.
Example
SMS Tx:
0000,B06,1
SMS Rx:
353358017784062,B06,OK
21.
Set Speeding Alarm – B07
SMS Set:
0000,B07,speed
SMS Get:
IMEI,B07,OK
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
- 13 -
UTRACK SMS Protocol
Description:
Version 1.7
speed = 0, cancel speeding alarm (default);
Speed = [1,255], set speed limit in Km/h.
Example
SMS Tx:
0000,B07,60
SMS Rx:
353358017784062,B07,OK
In this example,
speed is over
the
following
message
will
be received
once
the
tracker ’s
60km/h.
353358017784062,Speeding,22.914891,114.087491,080229203703,A,10,22,55,44,1,24,6635,3
88,,0000,,
22.
Set Tow Alarm – B08
SMS Set:
0000,B08,time
SMS Get:
IMEI,B08,OK
Description:
When the tracker moves or trembles over preset time, it will send a report to the authorized
phone number. The sleep mode should be preset as level 2 through command A73 and the
value of “Tremble T ime”be set through command B08 before using the tow alarm, otherwise
the alarm set doesn't work.
time = 0, cancel tow alarm (default);
time = [1,255], set period in second.
Example
SMS Tx:
0000,B08,3
SMS Rx:
353358017784062,B08,OK
In this example, when the tracker moves or trembles for over 3 seconds, the following message
will be received.
353358017784062,Tow,22.914891,114.087491,080229203703,A,10,22,55,44,1,24,6635,388,,0
000,,
23.
Set Tremble Sensitivity (MVT100/MVT340/MVT380/T1/T3) – B09
SMS Set:
0000,B09,sensitivity
SMS Get:
IMEI,B09,OK
Description:
Sensitivity = [1,65535], set sensitivitygrade for tremble sensor.
The tremble sensor is more sensitive if the grade is lower.
Defaulted as 1.
Example
SMS Tx:
0000,B09,10
SMS Rx:
353358017784062,B09,OK
24.
Set TrembleSensitivity (MVT600) – B20
SMS Set:
0000,B20,sensitivity
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
- 14 -
UTRACK SMS Protocol
Version 1.7
SMS Get:
IMEI,B20,OK
Description:
Sensitivity= [1,65535], set sensitivitygrade for tremble sensor.
The tremble sensor is more sensitive if the grade is lower.
The default value is 5.
Example
SMS Tx:
0000,B20,10
SMS Rx:
353358017784062,B20,OK
25.
Set Anti-theft – B21
GPRS Set
B21,Status
GPRS Get
B21, OK
Description:
Status =1, set anti-theft successfully (default); The device of MVT series will alarm when
the first negative input and the first positive input are active except SOS.
Status = 0, cancel anti-theft; The device of MVT series will not alarm when the first
negative input and the first positive input are active except SOS.
Note: this function is only applied in vehicles trackers of
MVT series. The relations
between inputs are as follows:
Model
Negative Input
Positive Input
MVT100
-
Input 2
MVT340
-
Input 2
MVT380
Input 2
Input 4
MVT600
Input 2
Input 3
T1/T3
Input 2
Input 3
Example
GPRS Tx:
0000,B21,1
GPRS Rx:
353358017784062,B21,OK
26.
Set Extended Functions – B31
SMS Set:
0000,B31,AB
SMS Get:
IMEI,B31,OK
Description:
A=0, all LED lights work normally (default);
A=1, all LED lights are off when the tracker is working;
B, reserved.
Example
SMS Tx:
0000,B31,11
SMS Rx:
353358017784062,B31,OK
27.
Set Log Interval –B34
SMS Set:
0000,B34,interval
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
- 15 -
UTRACK SMS Protocol
Version 1.7
SMS Get:
IMEI,B34,OK
Description:
Set the interval for storing valid GPS data into tracker’s flash memory.
interval = 0, turn off logging (default);
interval = [1,65535], set logging interval in second.
Example
SMS Tx:
0000,B34,60
SMS Rx:
353358017784062,B34,OK
28.
T ime Zone Setting (for SMS Report) – B35
SMS Set:
0000,B35,minute
SMS Get:
B35,OK
Description:
Default time of the tracker is GMT, you can use this command to correctthe trackers time to
your local time for SMS report.
minute = 0, GMT (default);
minute = [-32768,32767], set time difference in minutes to GMT. T
ime zone for SMS is separate from GPRS.
Example
SMS Tx:
0000,B35,480
SMS Rx:
353358017784062,B35,OK
29.
T ime Zone Setting (for GPRS Report) – B36
SMS Set:
0000,B36,GPRS minute
SMS Get:
IMEI,B36,OK
Description:
minute = 0, GMT (default);Note: MS02 will automatically recognize the user's time zone from
computer system. Please don't change GPRS time zone, and remain the device's default GPRS
time zone as 0. If changed, it may occur discrepancy between the tracking time and the actual
time.
minute = [-32768,32767], set time difference in minutes to GMT.
Example
SMS Tx:
0000,B36,480
SMS Rx:
353358017784062,B36,OK
30.
Set SMS Header for Event – B91
SMS Set:
0000,B91,even code,header
SMS Get:
IMEI,B91,OK
Description:
Header: max 16 bytes.
Please refer to Annex 2 for more details.
Example
SMS Tx:
0000,B91,1,SOS
SMS Rx:
353358017784062,B91,OK
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
- 16 -
UTRACK SMS Protocol
31.
Version 1.7
Output Control – C01
SMS Set:
0000,C01,speed,ABCDE
SMS Get:
IMEI,C01,OK
Description:
Speed = 0, no speed limit;
Speed = [1,255], in km/h, set conditional speed limit for output control.
When speed is below the set speed, output is activated.
A=0, close output (OUT1) -open drain;
A=1, open output (OUT1) -connect to GND;
A=2, remain previous status.
B=0, close output (OUT2) -open drain;;
B=1, open output (OUT2) -connect to GND
B=2, remain previous status.
C=0, close output (OUT3) -open drain;
C=1, open output (OUT3) -connect to GND;
C=2, remain previous status.
D=0, close output (OUT4) -open drain;
D=1, open output (OUT4) -connect to GND;
D=2, remain previous status.
E=0, close output (OUT5) -open drain;
E=1, open output (OUT5) -connect to GND;
E=2, remain previous status.
Example
SMS Tx:
0000,C01,20,12221
SMS Rx:
353358017784062,C01,OK
32.
Protocol Control – C03
SMS Set:
0000,C03,X
SMS Get:
IMEI,C03,OK
Description:
X = 0, Auto Event Report (default);
X = 1, Event report needs server ’s confirmation by AFF command.
Example
SMS Tx:
0000,C03,0
SMS Rx:
353358017784062,C03,OK
33.
Set Delivery Mode of GPRS Buffer– C04
SMS Set:
0000,C04,X
SMS Get:
IMEI,C04,OK
Description:
X = 0, FIFO First In, First Out (Default), data is stored by queue.
X = 1, FILO First In, Last Out, data is stored by stack.
Example
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
- 17 -
UTRACK SMS Protocol
Version 1.7
SMS Tx:
0000,C04,1
SMS Rx:
353358017784062,C04,OK
34.
SMS Message Display– C11
SMS Set:
0000,C11,Txt
SMS Get:
IMEI,C11,OK
Description:
Message from the mobile phone will display on LCD.
Txt: Message content. Must be ASCII String, Max 150 Bytes.
Example
SMS Tx:
0000,C11,SMS Message
SMS Rx:
353358017784062,C11,OK
35.
Get Firmware Version and SN – E91
SMS Set:
0000,E91
SMS Get:
IMEI,E91,version,SN
Description:
Get current firmware version and S/N details of the tracker.
Example
SMS Tx:
0000,E91
SMS Rx:
353358017784062,E91,FWV1.00,12345678
36.
Reboot GSM Module – F01
SMS Set:
0000,F01
SMS Get:
IMEI,F01,OK
Description:
Reboot GSM module.
Example
SMS Tx:
0000,F01
SMS Rx:
353358017784062,F01,OK
37.
Reboot GPS Module – F02
SMS Set:
0000,F02
SMS Get:
IMEI,F02,OK
Description:
Reboot GPS module.
Example
SMS Tx:
0000,F02
SMS Rx:
353358017784062,F02,OK
38.
Clear Journey and Running T ime – F06
SMS Set:
0000,F06,X
SMS Get:
IMEI,F06,OK
Description:
Clear Journey and Running T ime.
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
- 18 -
UTRACK SMS Protocol
Version 1.7
X=1, clear journey
X=2, clear running time
X=3, clear journey and running time
Example
SMS Tx:
0000,F06,1
SMS Rx:
353358017784062,F06,OK
39.
Set Mileage and Running T ime - F08
SMS Set
F08, Running T ime, Mileage
SMS Get
F08,OK
Description:
Running T ime:[0, 4294967295],decimalism format, units in meters,null won't be set.
Mileage:[0, 4294967295],decimalism format, units in meters,null won't be set.
Example
SMSTx:
@@D40,353358017784062,F08,0,4825000*51\r\n
SMS Rx:
$$D28,353358017784062,F08,OK*FA\r\n
40.
Delete SMS/GPRS Buffer – F09
SMS Set:
0000,F09,X
SMS Get:
IMEI,F09,OK
Description:
X=1,delete SMS buffer
X=2,delete GPRS buffer
X=3,delete SMS and GPRS buffer
Example
SMS Tx:
0000,F09,1
SMS Rx:
353358017784062,F09,OK
41.
Initialization– F11
SMS Set:
0000,F11
SMS Get:
IMEI,F11,OK
Description:
Set all parameters, except for the password, back to factory default.
Example
SMS Tx:
0000,F11
SMS Rx:
353358017784062,F11,OK
42.
Change Password – F20
SMS Set:
0000,F20,new password
SMS Get:
IMEI,F20,OK
Description:
Change SMS password. Password is 4 digits.
Example
SMS Tx:
0000,F20,1234
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
- 19 -
UTRACK MS02 User Guide
SMS Rx:
43.
version 1.3
353358017784062,F20,OK
Initialize Password – FAB
SMS Set:
8888,FAB
SMS Get:
IMEI,FAB,OK
Description:
Set the password back to factory default in case you forget your password.
Only authorized phone number(s) can send this command.
Example
SMS Tx:
8888,FAB
SMS Rx:
353358017784062,FAB,OK
If you have any questions, please send e-mail to support@extramiles.asia. We are here to help you.
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
- 20 -
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising