BodyMedia Fit | AB155 | Product specifications | BodyMedia Fit AB155 Product specifications

BodyMedia Fit AB155 Product specifications
Manual & Quick Start Guide
*
CORE Armband
Model AB155
Contents
Purpose of the System........................................................................... 2
Cautions.................................................................................................. 3
Get Started.............................................................................................. 5
Your Armband......................................................................................... 5
Wearing Your Armband.......................................................................... 6
Removing the Sensor from the Strap.................................................... 8
Charging the Battery............................................................................... 8
Checking Battery & Memory Status....................................................... 9
Troubleshooting.................................................................................... 10
Care & Cleaning.................................................................................... 10
Symbol Definitions............................................................................... 11
Accuracy................................................................................................ 11
Product Specifications.......................................................................... 12
Warranty................................................................................................ 13
User Environment................................................................................ 15
Regulatory Statement........................................................................... 19
Safe Disposal........................................................................................ 20
End User License Agreement............................................................... 20
Copyright, Patent, and Trademark Notice........................................... 21
Purpose of the System
Cautions
INTENDED USE
Always consult a physician before starting any new diet or exercise program. This system is
not to be used for diagnostic purposes and is not intended to be a substitute for the medical
advice or supervision of your personal physician.
The weight management system records, analyzes and reports
physiological parameters. These objective health metrics assist you to
maintain a healthy weight and an active lifestyle, which are continually
cited as the keys to combating and managing serious medical conditions
including obesity, cardiovascular disease and diabetes. The information
presented by the system can be used by your physician or healthcare
practitioner in the assessment and treatment of medical conditions
influenced by weight and activity.
RISKS & BENEFITS
The predominant benefit of the product is enabling the monitoring and
management of daily metabolic and lifestyle data in order to reach your
activity and weight goals. In addition to weight management, known
benefits of increasing activity levels include increased life expectancy,
improved sleep, and enhanced appearance and self perception.
Analysis and post market surveillance indicate that risks of using
the products are extremely low. No significant health risks have been
identified. The most frequently reported health risk, occurring in less
than 1% of users, is a mild to severe skin irritation resulting from wearing
the Armband. The issue is often resolved by following proper wear and
cleaning guidelines. Skin irritation may still occur for individuals with
highly sensitive skin or for those with a specific allergy to materials used
in the Armband and/or strap. However, it is best to discontinue use and
consult a physician regarding skin irritations.
If you have a known metal allergy, consult your physician prior to using
the Armband. Read the instructions provided and review the Cautions
section of this manual before using the Armband.
Materials in the Armband have been evaluated for skin contact. Because everyone’s skin is
different you may experience irritation or redness after wearing the Armband. If this occurs,
discontinue use and consult your physician.
• If you have known metal allergies, consult your physician prior to wearing.
• Do not wear on an open wound, sore, or burn.
• To reduce potential for skin irritation, wear for a maximum of 23 hours per day. Be
sure to leave it off one hour per day.
• To reduce the potential risk of skin irritation, be sure to dry your arm thoroughly
before wearing.
• The tab at the end of the Armband strap should be aligned to avoid unintended
contact with the skin which may cause scratching.
• To avoid skin burns, do not wear when it has been exposed to excessively hot
temperatures including direct sun exposure.
Be careful not to over-tighten the strap while on your arm. If you feel constriction or loss of
circulation at any time, loosen the adjustable strap and re-fasten it to a more comfortable
setting. If you experience pain, bruising, swelling, or discoloration of the arm, discontinue
use and consult a physician.
This product is not defibrillation proof.
Do not place this equipment in close proximity to other devices that can cause
electromagnetic interferences of any nature.
The equipment is not suitable for use in the presence of a FLAMMABLE ANESTHETIC
MIXTURE WITH AIR OR WITH OXYGEN OR NITROUS OXIDE.
Medical electrical equipment requires special precautions regarding electromagnetic
environments (EMC) and must be installed and put into service according to the EMC
information provided in the User Guide. Portable and mobile radio frequency (RF)
communications equipment can effect medical electrical equipment.
Check the equipment for sharp edges or damage before each use.
2
Once plugged in, the armband lights will blink indicating proper connection and charge
progress. If no indication is seen, disconnect the cable and consult customer service.
3
Cautions
(continued)
If the Armband is dropped, ensure that it is working properly and not physically damaged
before relying on readings.
The equipment of the system should not be used adjacent to or stacked with other
equipment. If such a setup is necessary, all equipment should be checked to verify correct
operation.
Get Started
Please refer to the “Get Started” instructions on our
homepage to begin using the system. It only takes a few
minutes to get set up and moving toward a healthier lifestyle.
www.bodymedia.com/start
Keep this equipment out of reach of children. The products contain small, removable parts
that may become choking hazards.
The equipment and wireless accessories should not be used in airplanes, hospitals, or any
location that prohibits cellular telephones or electronic devices.
Your Armband
Do not use unapproved accessories.
Do not use the “reminders” feature of the Armband as a notification for any vital, life-critical
events (including taking medication).
Status Button
Sensor
To prevent possible damage to the USB cable, grasp the plug end when disconnecting the
USB cable. Replace the cable if it becomes frayed.
DO NOT IMMERSE THE ARMBAND IN WATER. The Armband is not designed to be used
underwater or to come in continuous contact with water.
Though the Armband was designed for wearability and long-term use, it is a sensitive
monitoring device. Rough handling can break internal components. Never drop or shock the
Armband and always store it in a safe place when not in use.
Avoid exposing the equipment to extreme temperatures, direct sunlight, moisture, sand,
dust, or mechanical shock.
Do not incinerate.
Strap
Status Lights
Do not attempt to open the Armband yourself. It contains no user-serviceable parts. Refer
all servicing to qualified Service Personnel. Opening the Armband yourself will void the
warranty.
Changes or modifications to the equipment not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
4
5
The Armband should
be worn no more than
23 hours a day.
Wearing Your
Armband
Replace the strap
if it has lost its
elasticity.
Information on
obtaining replacement
parts can be found at
www.bodymedia.com/shop
23
HR
Wear on the back of your
left upper arm (triceps);
be sure your upper left arm
and the Armband are clean,
dry, and free of lotion or oil.
Do not secure the strap too tightly.
It should be snug, but you should be
able to fit two fingers beneath the strap.
The logo
should face
upward.
The silver sensors
on the underside
should be in contact
with your skin.
Secure the Velcro
pull-tab once you have
a comfortable fit.
Remove the Armband by
stretching the elastic, not
by using the Velcro tab.
10
MIN
6
The Sensor will
automatically turn on
and begin collecting
data within 10 minutes.
Activation is indicated
by a series of
audio tones.
There is no
power button on
the Armband.
7
P
Removing the Sensor from the Strap
R
ESS
Reattaching the Sensor
Locate the USB port on the
Sensor, then align the port
with the indentations on the
side of the strap. Squeeze
the Sensor into the strap
until it snaps into place.
Press down on the right side
of the Sensor until it separates
from the strap.
Charging the Battery
Checking Battery and Memory Status
Charge the battery by connecting
the Sensor to your computer with
the USB cable.
The Armband can store 14 days worth of data before needing to be uploaded.
To check if your Armband is ready to collect data, remove the Armband and
press the Status Button. The Status Lights will indicate whether the Armband
is ready to collect data:
The first charge will take about 3
hours. The Status Light will flash
green when it is fully charged.
The Core Armband works for 4-6
days before recharging is needed.
8
Once plugged in, the armband lights will blink
indicating proper connection and charge progress.
If no indication is seen, it is important to disconnect
the cable and consult customer support.
Green (solid)
Armband is ready.
Amber (slow flashing)
Red (fast flashing)
Less than 24 hrs of battery
life or memory remain. Plug
in the Armband to charge
and upload data.
Armband is not able to
collect data. Plug in to
charge and upload data.
9
Troubleshooting
Symbol Definitions
For troubleshooting information and additional resources, please refer to
www.bodymedia.com/support
Care & Cleaning
Consult instructions
for use
FCC Logo
CAUTION
Serial Number
Clean the Armband regularly after sweating or when it becomes noticeably
moist to ensure that it works correctly. Minimize use of solvents, cleaners
or other chemicals and do not sterilize any part.
Non-ionizing radiation
Date of Manufacture
WATER RESISTANCE
The Waste Electrical and
Electrical Equipment
Regulations indicates
separate collection for
electrical and electronic
equipment
The Armband is not designed to be used underwater or to come into
continuous contact with water. Do not immerse the Armband in water.
CLEANING THE SENSOR
Use a cloth or towel moistened with mild soap and water to wipe
the side of the Sensor that touches the skin. Remove any excess soap and
dry with a cloth or towel completely before wearing.
CLEANING THE STRAP
Electrical Safety
Armband tested to
applicable safety
standards by MET
Laboratories
Type B Applied Part
Recyclable
Hand wash with mild soap and warm water, rinse, then air dry. For
optimal performance and lifespan of the strap, avoid machine drying.
DISINFECTING
The Sensor may be disinfected by wiping with a soft cloth dampened
with 70% isopropyl alcohol. Allow 5-10 minutes for drying before wearing.
Always disinfect the Sensor and replace the Armband strap prior to use
by others.
10
Accuracy
System (Per day, adults)
Total calories/METs for free living activities: mean error < 10%
Total minutes of physical activity: mean error < 5%
Total step count: mean error < 9%
11
Product Specifications
Warranty
Sensors:
Unless otherwise set forth in a separate limited warranty description included with the
BodyMedia Hardware (including Armband, Display with Clip and Watch strap), BodyMedia
warrants that BodyMedia Hardware is free of defects in materials and workmanship
under normal use and service (“Limited Warranty”) for 1 year from the date the product is
purchased by the original retail purchaser (the “Limited Warranty Period”). This warranty
is only valid for the original retail purchaser and only from the date of initial retail purchase,
and the purchaser must provide proof of purchase. The purchaser will be responsible for,
and pre-pay, all return shipping charges and shall assume all risk of loss or damage to
product while in transit to BodyMedia. We recommend that you use a traceable method of
shipping for your protection.
• Accelerometer (3-axis)
• Heat Flux
• Skin Temperature
• Galvanic Skin Response (GSR)
Materials:
• Sensor: ABS, polycarbonate, thermoplastic polyurethane, 304 grade stainless steel
• Adjustable strap/wing assembly: Nylon, polyester, Lycra (no latex content) or
polyisoprene, polycarbonate, thermoplastic polyurethane, silicone
Battery power: 4-6 days based upon individual use
Battery type: Internal lithium polymer cell
Radio Frequency: 2.4GHz
Transmitter output power: <1mW
If a defect covered by this Limited Warranty occurs during the Limited Warranty Period,
BodyMedia will, at its option, repair or replace the entire unit or refund the original purchase
price. The foregoing remedies are purchaser’s sole and exclusive remedy and BodyMedia’s
sole and exclusive liability for breach of the Limited Warranty.
Memory capacity: 14 days under steady use
Armband size: (l) 40mm x (w) 65mm x (h) 11mm [1.6” x 2.6” x 0.4”]
Armband weight (with adjustable strap): 30g (1.1oz)
Water resistance: IPX4 classified (only when Armband is properly inserted into the Armband
strap)
Operating temperature/humidity: 5°C - +40°C (40°F to 104°F)/ 5 - 95% RH non-condensing
Storage temperature/humidity: -20°C - +60°C (-4°F to 140°F) / 5 - 95% RH non-condensing
Transmit Power Class 8 – Less than 10mW output power
Duty Cycle Class 4 – permitted to operate at 100% duty cycle
This Limited Warranty is subject to compliance with the applicable user guides for the
BodyMedia Hardware and does not apply to normal wear and tear or damage caused
by improper or incorrectly performed maintenance, negligence, accident, misuse or
unreasonable use, modification, tampering, or any other causes not related to design,
materials or workmanship. This Limited Warranty excludes replaceable batteries.
EXCEPT AS SPECIFIED IN THIS LIMITED WARRANTY SECTION, ALL EXPRESS OR
IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS, INCLUDING, WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY,
Receiver Class 3 – Standard reliable SRD communication media
12
13
Warranty (continued)
User Environment
FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, QUALITY, NONINTERFERENCE, ACCURACY OR ARISING FROM A COURSE OF DEALING,
PERFORMANCE, USAGE, OR TRADE PRACTICE, ARE HEREBY EXCLUDED TO THE
EXTENT ALLOWED BY APPLICABLE LAW AND ARE EXPRESSLY DISCLAIMED BY
BODYMEDIA. TO THE EXTENT AN IMPLIED WARRANTY CANNOT BE EXCLUDED, SUCH
WARRANTY IS LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD. BECAUSE
SOME STATES OR JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS, THE ABOVE LIMITATION MAY NOT APPLY. THESE
WARRANTIES GIVE CUSTOMER SPECIFIC LEGAL RIGHTS, AND CUSTOMER MAY ALSO
HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION.
2.5m
1.5m
1.5m
1.5m
Computer and Wireless Communicator
Diagram not to scale.
SUBJECT TO APPLICABLE LAW, IN NO EVENT SHALL BODYMEDIA’S LIABILITY EXCEED
THE PURCHASE PRICE OF THE BODYMEDIA HARDWARE. This disclaimer and exclusion
shall apply even if the Limited Warranty set forth above fails of its essential purpose.
This limited warranty does not apply to any firmware included in or software provided and
associated with the product. All such firmware and software is licensed under a separate
end user license agreement a www.bodymedia.com/EULA and/or in the EULA provided with
the download of any such software.
14
Guidance and Manufacturer’s Declaration - Emissions
The Armband is intended for use in the electromagnetic environment specified below.
The customer or user of the Armband should ensure that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic
Environment—Guidance
RF Emissions CISPR 11
Class B, Group 1
The Armband uses RF energy only for its
internal function. Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic
equipment
Harmonics IEC
6100-3-2
N/A
Flicker IEC 6100-3-3
N/A
The Armband is suitable for use in all
establishments, including domestic, and
those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
purposes
15
User Environment (continued)
Guidance and Manufacturer’s Declaration - Immunity
Guidance and Manufacturer’s Declaration - Emissions
The Armband is intended for use in the electromagnetic environment specified below.
The customer or user of the Armband should ensure that it is used in such an environment.
The Armband is intended for use in the electromagnetic environment specified below.
The customer or user of the Armband should ensure that it is used in such an environment.
Immunity Test
IEC 60601 Test
Level
Compliance
Level
Electromagnetic
Environment - Guidance
Immunity
Test
ESD IEC 610004-2
±6kV Contact
±8kV Air
±6kV Contact
Floors should be wood,
concrete, or ceramic tile. If
floors are synthetic, they r/h
should be at least 30%
EFT IEC 610004-4
±2kV Mains
N/A
±8kV Air
±1kV I/Os
±1kV Differential
Mains power quality should be
that of a typical commercial or
hospital environment
N/A
IEC 60601
Test Level
Compliance
Level
Portable and mobile
communications equipment
should be separated from
Armband by no less than the
distances calculated/listed
below:
Conducted RF
IEC 61000-4-6
3 Vrms
150 kHz to
80 MHz
3 Vrms
150 kHz to
80 MHz
±2kV Common
Voltage Dips/
Dropout IEC
61000-4-11
Power
Frequency
50/60H
Magnetic Field
IEC 61000-4-8
16
>95% Dip for
0.5 Cycles
60% Dip for 5
Cycles
30% Dip for 25
Cycles
>95% Dip for 5
Seconds
N/A
3A/m
3A/m
Mains power quality should be
that of a typical commercial or
hospital environment. If the
user of the Armband requires
continued operation during
power mains interruptions,
it is recommended that the
Armband be powered from an
uninterruptible power supply
or battery.
Power frequency magnetic
fields should be that of a
typical commercial or hospital
environment.
Electromagnetic
Environment - Guidance
Radiated RF
IEC 61000-4-3
3 V/m
80 MHz to
2.5 GHz
3 V/m
80 MHz to
2.5 GHz
D=(3.5/V1)(Sqrt P)
D=(3.5/E1)(Sqrt P) 80 to
800 MHz
D=(7/EI)(Sqrt P)
800 MHz to 2.5 GHz
Where P is the max power
in watts and D is the
recommended separation
distance in meters.
Field strengths from fixed
transmitters, as determined
by an electromagnetic site
survey, should be less than the
compliance levels (V1 and E1).
Interference may occur in the
vicinity of equipment containing
a transmitter.
17
User Environment (continued)
Regulatory Statement
Recommended Separation Distances for the Product
The Armband is intended for use in the electromagnetic environment specified below.
The customer or user of the Armband can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF Communications
Equipment and the Armband as recommended below, according to the maximum output
power of the communications equipment.
Max Output
Power (Watts)
Separation (m)
150kHz to 80MHz
D=(3.5/V1)(Sqrt P)
Separation
(m) 80 to
800MHz
Separation (m)
800MHz to
2.5GHz
D=(3.5/V1)
(Sqrt P)
D=(7/E1)(Sqrt P)
0.01
0.1166
0.1166
0.2333
0.1
0.3689
0.3689
0.7378
1
1.1666
1.1666
2.3333
10
3.6893
3.6893
7.3786
100
11.6666
11.6666
23.3333
FCC Declaration of Conformity – We, BodyMedia, Inc., One Gateway Center, 420 Fort
Duquesne Boulevard, Suite 1900, Pittsburgh, PA 15222, declare under our sole responsibility
that the products, BodyMedia, Inc. and BodyMedia® Armbands (Model AB155) comply
with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not in-stalled
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
CAUTION: Changes or modifications to this equipment not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure information: See 2.1093 of the FCC Rules
This product is a Type B Applied Part complying with the specified requirements of the
Standard to provide protection against electric shock, particularly regarding allowable
Leakage Current.
This Class B digital apparatus complies with Canadian ICES-003.
Cet apareil numèrique de la classe B est conforme à la norme NMB-003 du Canada.
18
19
Regulatory Statement (continued)
Copyright, Patent & Trademark Notice
IEC 60601-1:1988 + A1:1991 + A2: 1995 - Medical Electrical Equipment; Part 1
General Requirements for Safety
The products and services which include the software, firmware, algorithms, processes, and
methods of BodyMedia FIT™, SenseWear® applications, and other applicable BodyMedia
applications as well, all devices and components used therewith including the Armband,
Display, and Wireless Communicator, are covered by one or more of the following patents:
United States Patent Nos.: D439,981, D651,552, D632,396, D645,968, 6,527,711, 6,595,929,
6,605,038, 7,020,508, 7,153,262, 7,261,690, 7,285,090, 7,689,437, and 8,157,731;
EN 60601-1:2001 - Medical Electrical Equipment; Part 1 General Requirements for Safety
UL 60601-1 – Medical Electrical Equipment, Part 1: General Requirements for Safety, 1st
Edition
CSA C22.2 No. 601-1:M90, R2001 – Medical Electrical Equipment, Part 1: General
Requirements for Safety
EN 60601-1-2:2007
IEC 60601-1-2:2001 + A1:2004
47CFR Part 15 Subpart B & ICES-003 Issue 4 February 2004 for Class B Digital Devices
47CFR Part 15 Subpart C & RSS-210, Issue 8, December 2010 for Intentional Radiators
ETSI EN 300 328 (Article 3.2 of R&TTE Directive)
ETSI EN 301 489-1 with ETSI EN 489-17 (Article 3.1(b) of R&TTE Directive)
RoHS requirements
Safe Disposal
If you want to dispose of the Armband, please do not use the ordinary trash. This product
must not be disposed of with your other household waste. Dispose of the Armband
equipment by taking it to a designated collection point for the recycling of waste electrical
and electronic equipment. This will help to conserve natural resources and ensure that the
Armband is recycled in a manner that protects human health and the environment. For more
information on where you can drop off your waste equipment for recycling, please contact
your local township, municipality, or city; your household waste disposal service; or the store
where you purchased the Armband.
European Patent Nos.: 1,292,217 and 1,292,218; Canadian Patent Nos.: 2,413,220 and
2,501,899; S. Korean Patent Nos.: KR 10-0831036, 10-0821945, 10-1107062 10-0885030, and
10-0956791; Israeli Patent Nos.: 153478, 153516, 158067,160079, and 167045; Japanese
Patent Nos.: JP 1138499, JP 4,125,132, JP 4,283,672, and JP 4,813,058; Mexican Patent
Nos.: MX 242292, 236870, 250153, 245862, 250156, 269421, and 271678; Brazilian Patent
Nos.: PI0111918-4, and PI0111995-8; and various worldwide patents pending. This notice is
accurate as of November 7, 2012. For the latest information please contact BodyMedia.
“BodyMedia,” “BodyMedia FIT,” the “Four Circle Design,” “Put On The Armband. Take Off
The Pounds.,” and “SenseWear” are trademarks or registered trademarks of BodyMedia, Inc.
Manual, firmware or software on armband, display device, or mobile device, related
algorithms and software, and firmware utilized by BodyMedia products, services, and/or
applications © Copyright 2011-2012 BodyMedia, Inc. All rights reserved. Any copying, use,
distribution or reverse engineering without a specific license from BodyMedia, Inc. or as
permitted by applicable law, is strictly prohibited.
End User License Agreement
The firmware included in and certain software provided and associated with the product is
subject to a BodyMedia Software License Agreement as set forth here:
www.bodymedia.com/EULA
20
21
BodyMedia, Inc.
One Gateway Center
420 Fort Duquesne Blvd.
Suite 1900
Pittsburgh, PA 15222
USA
www.bodymedia.com
100778_REV3
© Copyright 2012 BodyMedia, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising