Extron electronics | Multi-Rate SDI Fiber Optic Transceiver FOX HD-SDI | FOX HD-SDI - Extron Electronics

FOX HD-SDI - Extron Electronics
Fiber Optic Extenders
FOX HD-SDI
Fiber Optic Extender for Multi-Rate SDI
Features
DESCRIPTION
• Extends SDI, HD-SDI, and 3G-SDI signals very long distances over a single
fiber — The FOX HD-SDI supports multi-rate SDI at rates up to 2.97 Gbps, and
complies with SMPTE 259M, 292M, 424M, and ITU digital video standards.
The Extron FOX HD-SDI Fiber Optic Extender enables long haul transmission of multi-rate
SDI video, with embedded audio and metadata, over a single fiber. Engineered for reliability
and exceptional high resolution image performance, it uses Extron's exclusive all digital, zero
compression technology to transmit multi-rate SDI signals up to 2.97 Gbps including SDI,
HD-SDI, and 3G-SDI. To optimize SDI signal transmission to and from the FOX HD-SDI, input
signals are automatiy equalized, and output signals are reclocked. The FOX HD-SDI can function
as a transmitter and a receiver in various user-configurable modes. It is ideally suited for use in
digital signage, broadcast and production, rental and staging, and medical applications.
• Input: BNC connector
• Outputs: Two BNC connectors
• Passes embedded audio, ancillary ID and metadata information, and SD/HD-SDTI
digital video signals — Passes all data allowed within published SMPTE and
ITU digital video standards, including embedded audio, ancillary ID and metadata
information, and SDTI (SMPTE 305M) and HD-SDTI (SMPTE 348M) digital video signals.
• Input equalization and reclocking on buffered outputs — The FOX HD-SDI
automatiy equalizes incoming multi-rate SDI signals, and reshapes and restores signals
on its buffered outputs.
• Dual buffered outputs — Provide additional system capability. When the FOX HD-SDI
is configured as a dedicated transmitter, the outputs can also be used for previewing on
a local monitor.
• Daisy-chain capability — When configured as a dedicated receiver, multiple
FOX HD-SDI units can be daisy-chained so that displays in multiple locations can be
served from a single transmitter location.
• Multi-rate SDI transceiver sends to and receives from a second FOX HD-SDI unit
over fiber in bi-directional transceiver mode
• Real-time status LED indicators for troubleshooting and monitoring
• Available as a 850 nm multimode model for moderate-range transmissions, and a
1310 nm singlemode model for extreme distances up to 30 km (18.75 miles)
• Industry standard LC connectors provide reliable physical connectivity and
precise fiber core alignment
• 1" (2.5 cm) high, quarter rack width metal enclosure — With a low profile
enclosure, the FOX HD-SDI can be conveniently and discreetly installed in a variety
of locations.
The FOX HD-SDI is designed for long distance transmission of high resolution content with the
highest quality. Because transmission of content is inherently secure and immune to outside
interference, fiber applications are favored in government, military, and medical environments.
The FOX HD-SDI features industry standard LC-type connectivity.
The FOX HD-SDI MM supports multimode fiber at 850 nm, which is typiy used within buildings
or facilities with moderate-range transmission distances up to 500 m (1,640 feet). The
FOX HD-SDI SM supports singlemode as well as multimode fiber at 1310 nm. Singlemode fiber
offers long-range transmission capability over extreme distances of up to 30 km (18.75 miles).
It is used in very large facilities such as airports and stadiums, and for connecting over very long
distances between facilities such as university campuses.
The FOX HD-SDI automatiy recognizes and transmits SDI, HD-SDI, and 3G-SDI signals, and
is compliant with SMPTE 259M, 292M, 424M, and ITU digital video standards. Because the
FOX HD-SDI is a transceiver, multi-rate SDI signals can be simultaneously transmitted and
received between a pair of FOX HD-SDI units. It is also configurable as a dedicated transmitter
with outputs for previewing on a local monitor, and as a dedicated receiver with the capability to
daisy-chain multiple units for supporting displays at multiple locations. Housed in a 1" high, quarter
rack width enclosure, the FOX HD-SDI can be conveniently installed in various locations.
• External universal power supply included, replacement
part # 70-775-01 — Provides worldwide power compatibility.
Model
VERSION DESCRIPTIONPART #
FOX HD-SDI MM
FOX HD-SDI SM
Multimode, Qty. 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-900-01
Singlemode, Qty. 1.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-901-01
Note: Two FOX HD-SDI units are required to establish a link for sending and receiving multi-rate SDI signals. The FOX HD-SDI is not compatible with the FOX 500, FOX 500 DVI, FOXBOX 4G VGA, or FOXBOX 4G DVI
Fiber Optic Extenders, or the FOX 500 DA6 Fiber Optic Transmitter/Distribution Amplifier.
Continued
Europe
+31.33.453.4040 / +800.3987.6673
+31.33.453.4050 FAX
Middle East
+971.4.2991800
+971.4.2991880 FAX
Asia
+65.6383.4400 / +800.7339.8766
+65.6383.4664 FAX
China
+86.21.3760.1568 / +400.883.1568
+86.21.3760.1566 FAX
Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
609
Fiber Optic Extenders
FOX HD-SDI
SPECIFICATIONS
Input cable equalization.......... Automatic for up to -30 dB of cable loss
HD-SDI...................................... 120 m (400') using Extron RG6 cable
90 m (300') using Extron RG59 cable
SDI........................................... 150 m (500') using Extron RG6 cable
120 m (400') using Extron RG59 cable
NOTE: The FOX HD-SDI is a transceiver that can function as a transmitter and/or as a receiver. Two units are required for a
transmitter-receiver system with one fiber optic cable linking the two units. The FOX HD-SDI is available in singlemode or
multimode versions.
NOTE: These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21, CFR 1040.10,
and FDA 21 CFR 1040.11.
NOTE: The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and
display used in the system.
Optical fiber interconnection between transmitter
and receiver
Video output — receiver
Number/signal type................. 2 single link SDI, HD-SDI, or 3G-SDI digital component video
Connectors.............................. 2 female BNC
Re-clocking............................. Automatic for 270 Mbps, 1.485 Gbps, 2.97 Gbps, or bypassed for
unrecognized rates
Nominal level........................... 0.8 Vp-p
Minimum/maximum levels...... 0.5 V to 1.0 Vp-p
Impedance............................... 75 ohms
Return loss.............................. <-25 dB @ 100 MHz
DC offset.................................. ±5 mV with input at 0 offset
Number/type............................ 1 fiber optic
NOTE: Only one fiber is required to transmit video and embedded audio and unidirectional data.
Connectors.............................. 1 LC connector
Operating distance.................. 30 km (18.75 miles) with singlemode (SM) cables with a FOXHD-SDISM
500 m (1640') with multimode (MM) cables with a FOXHD-SDIMM
NOTE: Operating distance is approximate. These are typical distances. The maximum distance may be greater than these
typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic
dispersion, environmental factors, and kinks.
General
Nominal peak wavelength....... 850 nm for FOXHD-SDI MM; 1310 nm for FOXHD-SDI SM
Transmission power
Singlemode............................... -5 dBm, typical
Multimode................................. -5 dBm, typical
Maximum receiver sensitivity
Singlemode............................... -18 dBm, typical
Multimode................................. -12 dBm, typical
Optical loss budget
Singlemode............................... 13 dB, maximum
Multimode................................. 7 dB, maximum
External power supply............. 100 VAC to 240 VAC, 50/60 Hz, 6 watts, external; to 12 VDC, 1 A, regulated
Power input requirements....... 12 VDC, 0.3 A
Temperature/humidity............. Storage: -40 to +158 ˚F (-40 to +70 ˚C) / 10% to 90%, noncondensing
Operating: +32 to +122 ˚F (0 to +50 ˚C) / 10% to 90%, noncondensing
Cooling..................................... Convection, unvented
Rack mount............................. Yes, with optional 1U, 9.5" deep rack shelf, part #60-190-01 (RSU
129) or 60-604-01 (RSB 129); 1U, 6" deep rack shelf, part #60-190-10
(RSU 126) or 60-604-10 (RSB 126); or VersaTools® 1U, 3.5" deep rack shelf,
part #60-190-20 (RSF 123) or 60-604-20 (RSB 123)
Furniture mountable with optional Through-Desk Mounting Kit, #70-077-02
(MBD 129); or Under-Desk Mounting Kit, #70-077-01 (MBU 125) Attachable to a projector mount with optional kit, part #70-526-02 (PMK 250) or
70-077-04 (PMK 200)
Enclosure type......................... Metal
Enclosure dimensions............. 1.0" H x 4.3" W x 3.0" D (quarter rack wide)
2.5 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
Product weight........................ 0.5 lb (0.3 kg) per each unit
Shipping weight....................... 3 lbs (2 kg) per each unit
Vibration.................................. ISTA 1A in carton (International Safe Transit Association)
Listings.................................... UL, CUL
Compliances............................ CE, FCC Class A, VCCI, AS/NZS, ICES, FDA Class 1
MTBF....................................... 30,000 hours
Warranty.................................. 3 years parts and labor
Video
Signal type............................... HD-SDI, SDI, and 3G-SDI digital video signals
Gain......................................... Unity
Resolution................................ 8 or 10 bits, automatic
Data rates................................ 270 Mbps, 1.485 Gbps, 2.970 Gbps
Operation standards................ SMPTE259M-C, SMPTE292M, SMPTE424M, ITU-RBT.601, ITU-RBT.1120,
DVB-ASI
Auto data rate lock.................. Yes
Video input — transmitter
Number/signal type................. 1 single link SDI, HD-SDI, or 3G-SDI digital component video
Connectors.............................. 1 female BNC
Data rates................................ 19 Mbps to 2.97 Gbps
Nominal level........................... 0.8 Vp-p
Minimum/maximum levels...... 0.5 V to 1 Vp-p with no offset
Impedance............................... 75 ohms
Return loss.............................. <-15 dB @ 5 MHz to 2.97 GHz
DC offset (max. allowable)....... 5 V
Input coupling.......................... AC
NOTE: All nominal levels are at ±10%.
NOTE: Specifications are subject to change without notice.
Note: For complete specifications, please go to www.extron.com
Extron
FOX HD-SDI
Fiber Optic
Transceiver
HD-SDI Broadcast
Monitor
I
AL
IC
OPT
ED
ER
UTS SD
TP HD
OU OX
F
FF
BU
G
NFI
CO
Up to 30 km (18.75 miles)
on singlemode fiber
SM Model
Rx
Tx
X
V
12 MA
0.2A
DI
/S
HD
IN
Extron
FOX HD-SDI
HD-SDI Broadcast
Monitor
Fiber Optic
Transceiver
I
AL
IC
OPT
ED
ER
FF
BU
G
NFI
CO
Rx
Tx
X
V
12 MA
0.2A
DI
/S
HD
UTS SD
TP HD
OU OX
F
HD-SDI Broadcast
Monitor
IN
Extron
FOX HD-SDI
Fiber Optic
Transceiver
I
AL
IC
OPT
ED
ER
UTS SD
TP HD
OU OX
F
FF
BU
G
NFI
CO
Rx
Tx
X
V
12 MA
0.2A
DI
/S
HD
IN
HD-SDI Camera
610
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
www.extron.com
© 2010 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising