Rosewill | RS-12001 | User manual | Rosewill RS-12001 User manual

Rosewill RS-12001 User manual
8 Channel H.264 DVR + 4 IR Camera
RSVA-11001/ RSVA-12001
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
WARNING

Do not expose the DVR under the sunlight, heat or wet environment while installation. As it could
decrease the performance of DVR and damage the machine.

Do not touch the power plug or case with wet hands as this could result electric shock.

Do not forcedly bend or put heavy object on power cable as this could result in injury to personal or
equipment.

Do not operate with damaged power cord or loose electrical outlet as this could result in electric
shock or accident.

Please use individual power instead of share electrical outlets with other electrical equipment as this
could result in damage or accident.

Do not attempt to service this DVR by yourself as it may expose you to dangerous voltage or other
hazards. Please refer all service to the qualified servicing distributor.

Do not open the covers or insert any object into DVR.
CAUTION

Do not place the machine on an uneven surface or it would decrease the DVR efficiency or malfunction.

Avoid any shock or bumping of the DVR while recording. Improper handling could damage the system.

OSD switching between VGA and BNC is automatic.
If you found the monitor is working, but the front panel and USB mouse are locked up.
Press and hold the “fast forward” button on the remote for 5 seconds to switch OSD setting.
CAUTION
Make sure the voltage selector switch is
set to appropriate setting before plug in!
1
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Specification .................................................................................................................................3
Front Panel....................................................................................................................................6
Backplane .....................................................................................................................................7
DVR Installation ............................................................................................................................8
System Operation .........................................................................................................................9
Display Setup.............................................................................................................................. 11
Search .........................................................................................................................................13
Main Menu ...................................................................................................................................15
8.1 Camera Setup ......................................................................................................................16
8.2 Record Setup .......................................................................................................................18
8.3 Alarm Setup .........................................................................................................................21
8.4 Motion Detection ..................................................................................................................21
8.5 Network Setup......................................................................................................................22
8.6 Log Search ...........................................................................................................................24
8.7 Backup .................................................................................................................................25
8.8 System .................................................................................................................................26
8.8.1 Time Setting .............................................................................................................. 27
8.8.2 HDD Setup ................................................................................................................ 27
8.8.3 Display Setting........................................................................................................... 28
8.8.4 System Information .................................................................................................... 29
8.8.5 User Password .......................................................................................................... 30
8.8.6 System Language ...................................................................................................... 30
8.8.7 Audio Setting ............................................................................................................. 31
8.8.8 System Maintenance ................................................................................................. 31
Cell Phone Monitoring Operation ..............................................................................................33
H264 Player Operation ...............................................................................................................57
Web Operation ............................................................................................................................59
Appendix .....................................................................................................................................71
12.1 How to search and playback the footage step-by-step. .........................................................71
12.2 How to backup the footage step-by-step. ..............................................................................74
12.3 How to setup the Network step by step. ................................................................................77
12.3.1 Static: ......................................................................................................................... 77
12.3.2 DHCP: ........................................................................................................................ 84
12.3.3 PPPoE: ...................................................................................................................... 89
12.3.4 How to set up a 3G connection for your DVR? ........................................................... 91
12.4 Email Setup ..........................................................................................................................92
12.5 DDNS Setup .........................................................................................................................93
Default Setting ............................................................................................................................99
HDD Support List......................................................................................................................100
USB Flash Memory Stick Support List ....................................................................................101
Operation System For Mobile Phone Application ..................................................................102
3G Data Rate .............................................................................................................................102
2
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
1.
User Manual
Specification
H.264 8CH DVR (RDVR-H08)
General
Operation System
PTZ Control
Senor & Alarm I/O
LINUX
Built-in RS485, support PELCO-P & PELCO-D, MIKAMI
4in/1out
Mouse Control
YES
Remote Control
YES
Compatible OS
Windows 2000, XP, Vista and 7
Power Supply (power adaptor included)
Power consumption
Working Temperature
Dimension
Weight
DC 12V (AC100V~240V 50/60HZ)
10 ~ 15 W (exclude HDD)
32℉ ~ 114.8℉ (0℃ ~ 46℃)
8.7”(W) x 11.3”(D) x 1.9”(H) (220mm x 288mm x 48mm)
3.5 lbs. / 1.6 kg (DVR only)
Video
Video Compression
Video System
Video Input
Video Output
H.264
NTSC / PAL
BNC 8-channel
BNC 1-channel, VGA 1-channel
Display Resolution NTSC
D1(720x480)
Display Resolution PAL
D1(720x576)
Display Frame Rate NTSC
240 fps
Display Frame Rate PAL
200 fps
Display Modes
Full Screen/Quad/PIP/S.E.Q
HDMI Interface
NO
Max. VGA Resolution
1440x900
Audio
Audio Input
RCA 4-channel
Audio Output
RCA 1-channel
Audio Alarm Modes
Intercom
Audio Compression
Motion Detection, Video Loss, HDD Error/Full
NONE
8kHz*16bit ADPCM
Recording
Record Resolution NTSC
D1(720x480), HD1(720x240), CIF(352x240)
Record Resolution PAL
D1(720x576), HD1(720x288), CIF(352x288)
Recording Frame Rate NTSC
Recording Frame Rate PAL
Recording Mode
60fps@D1, 120fps@HD1, 240fps@CIF
50FPS@D1, 100fps@HD1, 200fps@CIF
Always / Schedule / Motion detection / Manual
3
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
Playback Mode
User Manual
PLAY / FF / SLOW / FWD / Frame by frame
Playback Search
Date/time, Event list
Local: Playback 8 channels at the same time
Multi-Channel Playback
Network: Playback 1 channels at the same time
Recording Pack Time
5/10/15/20/30/60mins file time selectable
HDD Interface
supports up to 2TB SATA HDD
USB 2.0 external hard drive (Up to 2TB, FAT 32) /
Backup
USB 2.0 flash drive / USB 2.0 CD/DVD-RW / Network
Network
Network Interface
RJ45, 10M/100M
Network Protocol
Support TCP/IP, DHCP, DDNS, SMTP , PPPoE, 3G WCDMA
Internet Viewing
Internet Explorer 6 or Higher (Max. 8 users at once)
Smart Phone Viewing (via 3G)
iPhone, Android, Blackberry, Windows Mobile and Symbian S60
Tablet PC Viewing
iPad, Android
Support Network Time Protocol (NTP)
YES
Support Free DDNS
YES
1/4” CCD IR Camera (RCMR-14CCDIR)
1/4” CMOS IR Camera (RCMR-14CMOCIR)
General
General
Power Consumption
70mA(IR OFF) / 260mA(IR ON)
Power Consumption
70mA(IR OFF) / 260mA(IR ON)
Power Supply
12V DC
Power Supply
12V DC
Operating Temperature
23℉ ~ 149℉ (-5℃ ~ 65℃)
Operating Temperature
23℉ ~ 149℉ (-5℃ ~ 65℃)
IP66
Weather Proof
Weather Proof
2.6” x 2.5” x 4.1”
Dimension
Weight
IP66
2.6” x 2.5” x 4.1”
Dimension
(66 x 64 x 104 mm)
0.73 lbs. / 330g (camera only)
Weight
Video
(66 x 64 x 104 mm)
0.73 lbs. / 330g (camera only)
Video
Image Sensor
1/4” Sony CCD
Image Sensor
1/4” CMOS
TV System
NTSC
TV System
NTSC
Effective Pixels (NTSC)
510(H)X492(V)
Effective Pixels (NTSC)
640(H)X480(V)
Horizontal Resolution
420 TV Line
Horizontal Resolution
420 TV Line
Electronic Shutter (NTSC)
1/60-1/100.000sec
Electronic Shutter (NTSC)
1/60-1/100.000sec
S/N Ratio
Max. 48dB (AGC off)
S/N Ratio
Max. 48dB (AGC off)
Backlight Compensation
Auto
Backlight Compensation
Auto
Video Output
1.0Vp-p. 75ohm (BNC)
Video Output
1.0Vp-p. 75ohm (BNC)
2.9 mm
Len
75 Degree
View Angle
Lens
Len
View Angle
Lens
Night Vision
IR Distance
4 mm
60 Degree
Night Vision
49.2 ft. (15M)
IR Distance
49.2 ft. (15M)
IR LED
21pcs
IR LED
21pcs
Min Illumination
0 LUX / F1.2
Min Illumination
0 LUX / F1.2
Mechanical IR cut filter
N/A
Mechanical IR cut filter
Yes
4
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Package content
RSVA-11001
RSVA-12001
 H.264 8CH DVR (RSVR-H08) x 1
 H.264 8CH DVR (RSVR-H08) x 1
 1/4” CCD IR Camera (RCMR-14CCDIR) x 4
 1/4” CMOS IR Camera (RCMR-14CMOSIR) x 4
 Slim Cable (82ft./25M) x 4
 Slim Cable (82ft./25M) x 4
 4 Way Power Cable Splitter x 1
 4 Way Power Cable Splitter x 1
 Camera Bracket x 4
 Camera Bracket x 4
 Camera Adapter (12V) x 1
 Camera Adapter (12V) x 1
 DVR Adapter (12V) x 1
 DVR Adapter (12V) x 1
 RCA Video Cable (2M) x 1
 RCA Video Cable (2M) x 1
 BNC TO RCA Convertor x 1
 BNC TO RCA Convertor x 1
 Remote Control x 1
 Remote Control x 1
 USB Mouse x 1
 USB Mouse x 1
 Quick Manual x 1
 Quick Manual x 1
 Quick Installation Guide x 1
 Quick Installation Guide x 1
 Software CD x 1
 Software CD x 1
5
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Front Panel
Menu
Manual Record/
STOP
Step / Pause
Play
Slow Forward
Quad
8 Division Display
Under the live viewing mode, press MENU to enter the main menu.
Under the menu mode, press MENU to go to the upper menu.
Press this button to start recording in live mode.
Under the playback mode, press the button to stop the operation or
go to upper menu.
Under the playback mode, press Step button to enter Play Frame
by Frame mode. Under the playback mode, press the button to
pause the playback.
Under the live viewing mode, press the Play button to enter the
playback mode.
Slow Forward speed: 1/2, 1/4, 1/8
Under the live viewing mode Quad/8 Channel display. Under
playback mode Quad display.
1
Channel 1/5
Under the live viewing mode or playback channel 1/5 display.
2
Channel 2/6
Under the live viewing mode or playback channel 2/6 display.
3
Channel 3/7
Under the live viewing mode or playback channel 3/7 display.
4
Channel 4/8
Under the live viewing mode or playback channel 4/8 display.
USB 2.0 Port
USB backup or firmware update.
(There are a front and a back USB that can be used one at a time.)
Power Indicator
The LED lights on when power on.
Record Indicator
The LED lights on when the DVR is recording.
Play Indicator
Up
Down
Left
Fast Rewind
Right
Fast Forward
Enter
The LED lights on when the DVR is playing.
To move up or down of the selection setting in the menu
To move left of the selection setting in menu.
Playback: x2 / x4 / x8 / x16 / x32 Multiple Speed.
To move right of the selection setting in menu.
Playback: x2 / x4 / x8 / x16 / x32 Multiple Speed.
Press the Enter button to confirm the setup or go into sub-menu.
6
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
2. Backplane

1
USB Mouse Port
2.0 USB Mouse
2
Video In
4/8CH Video Input (BNC)
3
Video Out
1CH Video Output (BNC)
4
Audio Out
1CH Audio Output (RCA)
5
Audio In
6
Alarm
7
DC12V
8
XGA
PC Monitor Output
9
LAN
RJ-45 Network Connection
10
RS-485
4CH Audio Input
Alarm I/O
Power Input
For Speed Dome Use
Alarm I/O
Item
Point 1: CH1 sensor input.
Point 2: CH2 sensor input.
Point 3: CH3 sensor input.
Point 4: CH4 sensor input.
Point 5: ground.
Point 6: the first relay joint port.
Point 7: the first relay normal open.
7
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
3. DVR Installation





Connect the camera video output to the DVR video input port with BNC connectors.
The camera install coaxial cable is suggested RG59 or above.
DVR Network installation
Please connect DVR to HUB or router by using RJ-45 network cable and make sure
the DVR network indicator LED is on.
(Please refer to Network Setup for further network setting information of using static IP,
PPPoE or DHCP.)
Alarm Installation
Please refer to Installation for external alarm I/O installation. Please refer to Alarm
Setup.
Speed Dome Installation
This device can support 3 kinds of communication protocol (Pelco D, Pelco P &
MIKAMI)
Power Installation
Please use the provided power cable and adaptor to connect the DVR
(AC100V~AC240V). Please refer to Installation for connecting position. The DVR
system will enter into live viewing mode when power is connected. Please refer to
Display Setup - Live Viewing Mode for more information.
OSD switching between VGA and BNC is automatic.
If you found the monitor is working, but the front panel and USB
mouse are locked up.
Press and hold the “fast forward” button on the remote for 5 seconds
to switch OSD setting.
8
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
4.
User Manual
System Operation
There are 3 kinds of DVR control method: front panel, remote control and USB mouse.
 USB Mouse Operation
1. Quick Menu: Right click the mouse button under the live viewing mode to go for
enter into Quick Menu.
2. Left click the mouse button under the main menu to go to the sub-select menu.
3. Left click the mouse button under the select menu to go to the sub-menu.
4. Use the mouse to change the setting.
5. Please refer to Display Setup - PTZ Setup.
 Remote Control Operation
Remote Control and front panel operation are the same; please refer to Front Panel
and the reference table of the button as below.
CH2/CH6 display
CH1/CH5 display
Record
Quad/Split
Windows display
CH3/CH7 display
CH4/CH8 display
Mute
Menu
Navigator
Enter
Fast Rewind
Fast Forward
Play
Stop/ Remote ID Setup
Step/Pause
 On live mode, click “Fast Forward” to switch on the GUI display.

Virtual Keyboard Operation
9
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
The text input of the virtual keyboard is as below:
Menu Operation
Select character from virtual keyboard
Keyin the select character
Exit the virtual keyboard
Front Panel & Remote
Control Operation
[Up/Down/Left/Right]
[Enter]
[MENU]
Mouse Operation
[Move Cursor]
[Left Click]
[Left Click]out of selection area
Key Description of Virtual Keyboard
Delete the previous character
Switch to text input
Enter key. Save and exit the virtual keyboard
Other Keys

Character Keyin
Main Menu Operation
Main menu

Setup Operation
Front Panel & Remote Control
USB Mouse
Select
[Up/Down/Left/Right]
[Moving Cursor]
Enter Select Menu
[Enter]
[Left Click]
Setup Operation
10
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Setup
Setup Operation
Front Panel & Remote Control
USB Mouse
Select
[Up/Down/Left/Right]
[Moving Cursor]
Confirm Select Setting
[Enter]
[Left Click]
Change the Select Setting
[Left/Right]
[Left Click]
5. Display Setup
There are 3 kinds of screen display mode: Live, Auto Switching and PTZ. DVR.
 Live Viewing Mode
The DVR will go to the live viewing mode after boot up. There are 5 different status icons:
●: Record
M: Motion Triggered
L: Video Loss
A: Alarm Triggered
: Sound on/off

Setup Operation
Front Panel&Remote Control
USB Mouse
Channel 1~4/8 Single Channel
Display
[CH1~4/8]
4/8 Channel Split Display
[4/8 CH Split]
Quick Menu
[MENU]
[Right]
Playback Mode
[Play]
[Right] QuickMenu
Start/Stop the Manual Record
[Record]
[Right] QuickMenu
Start/Stop the Auto Switching
Front Panel
[Auto Switch]
Remote Control
[Auto Switch]
[Right] QuickMenu
Start/Stop Mute
Remote Control
[Mute]
[Left] Left Click
Select one of channel
[Double click left button]
Under single channel
[Double click left button]
Quick Menu
Main Menu
Remote Lock
Search
PTZ
11
Manual REC
Zoom Mode
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001

User Manual
Setup Operation
Front Panel & Remote Control
USB Mouse
Select Item
[Left/Right]
[Moving Cursor]
Enter the Select Item
[Up/Down]
[Moving Cursor]
Confirm the Select Item
[Enter]
[Left Click]
Exit
[MENU]
[Left Click] out of selection area
PTZ
Please set the speed dome properly before control PTZ. Please refer to PTZ Setup.
Setup Operation
Front Panel & Remote Control
USB Mouse
Select Item
[Up/Down/Left/Right]
[Moving Cursor]
Enter Select Item
[Enter]
[Left Click]
Zoom +,Focus, +Iris, +Adjust Movement Speed
PTZ Up / Down / Left / Right
Start/Stop Auto Tracking
Exit

[Right click] or [Left click
Playback Operation
12
]
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001

User Manual
Setup Operation
Front Panel & Remote
Control
Fast Rewind
[Fast Rewind]
Fast Forward
[Fast Forward]
Step Forward
[StepForward]
Step/Pause
[Step/Pause]
Play 1x
[Play]
Stop
[Stop]
Digital Zoon
None
Drag by Left Click
Derived Image
None
[Left click]
1~4/8 Single Channel Display
[1~4/8 Channel]
Select Channel [Double left click]
4/8split Display
[4/8 split]
Under single channel
[Double left click]
USB Mouse
Auto Switching
1. Auto switch starts from order CH1~CH8, 4/8 split channel.
2. Press the button again to stop the function.
6. Search
In Live mode, use Play button in the front panel/remote controller or right clicking the
13
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
mouse to switch to the Search function.



Setup Operation
Front Panel & Remote
Controller
USB Mouse
Search
[Enter]
[Left Click]
Select Channel
[Up/Down]
[Moving Cursor]
Select Dates
[Up/Down/Left/Right]
[Moving Cursor]
Playback
[Enter]
[Left Click]
Return to Upper Menu
[MENU]
]
No data: no color, data of alarm trigger: red color, normal record data: green color.
Select the first half of hour frame under the date, the playback will start from 00 mins:
00 sec. Select the second half of hour frame under the date, the playback will start
from 30mins:00sec. If there is no data on the date, please try to search from record
list.
Select any of 4/8 channels to playback.
8CH DVR

[Right click] or [Left click
Record List
14
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
Enter Select Item
Front & Remote
Controller
[Enter]
Select Item
[Up/Down/Left/Right]
Return to Upper Menu
[MENU]
Setup Operation
User Manual
USB Mouse
[Left Click]
[Moving Cursor]
[Right click] or [Left click
]
First Page
Previous Page
Next Page
Last Page
Mark all the events in this page
BackUp


7.
List all of recording data and click on one of record data to playback.
Backup
Please click “BACKUP” to backup the selecting file to USB memory stick.
Main Menu
15
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Camera
Record
Sensor
Motion
Network
Log Search
Back Up
System
Setup Operation
Front Panel & Remote
Controller
USB Mouse
Select Item
[Up/Down/Left/Right]
[Moving Cursor]
Enter Select Item
[Enter]
[Left Click]
Exit Main Menu
[MENU]
[Right click] or [Left click
]
8.1 Camera Setup





Channel
Select one channel to set. Use CopyButton to copy present settings to other channels.
Camera Title
Set the title of camera. Key in by using virtual keyboard.
Title Position
Set the title position. Set: Top Left, Top Right, Bottom Left, Bottom Right and Off.
Display
Display the channel, set: On/Off
Camera Color Setup





PTZ Setting
16
Hue: 0~50
Brightness: 0~50
Contrast: 0~50
Saturation: 0~50
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001







User Manual
Type
Speed dome model type. Set: PTC-301, PTC-203ST, FUM 626, JG_QG988,
FUM 622SD, FUM 628 or off. Please select the correct communication
protocol if you enable this setting.
Protocol
Speed dome protocol. Set: PELCO P, PELCO D, MIKAMI or off.
Address
Speed dome address. Set: 0~255
Baud Rate
Speed dome baud rate. Set: 1200, 2400, 4800, 9600, 19200.
Tour Time
Speed dome tour time. Set: 5, 10, 15, 20, 25 sec or off.
Tilt Opposite
Set speed dome image upside down. Set: On/Off
Preset
17
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
Setup Operation
Select Item
Enter Select Item
Front Panel &
Remote Controller
[Up/Down/Left/Right]
[Enter]
User Manual
USB Mouse
[Moving Cursor]
[Left Click]
Zoom +,Focus +,Iris +,Adjust Move Speed
Set PTZ Up/Down/Left/Right
Start/Stop Auto Tracking
Number Preset Setting
This function is preset 95 enter the menu
Save Preset Setting
Clear Preset Setting
Clear All Preset Setting
Return to Upper Menu



[Right click] or [Left click
Buzzer Duration
The buzzer ON duration when video loss.
Alarm Relay Duration
The Relay ON duration when video loss.
Time Display
Display the time in LIVE mode. Values: ON/OFF.
8.2 Record Setup
18
]
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001

Record Enable Setup
On/Off the channel.
Watermark: Insert the words of watermark.
8CH DVR

Resolution Setup
NTSC Recording Resolution: 720x480 / 720x240 / 360x240.
PAL Recording Resolution: 720x576 / 720x288 / 360x288.
8CH DVR

Frame Rate Setup
Setting of Frame Rate: NTSC: 0-30 frames/sec; PAL: 0-25 frames/sec.
19
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
8CH DVR

Quality Setup
Setting of recording quality: Values 1-5. The bigger value, the better quality.
8CH DVR




Pre Record setting
Pre Recording time when motion alarm. Values: 0-10 seconds.
Audio
On/Off the sound effects.
Encode Mode
Encoding of channel. Values: VBR or CBR.
Record schedule setup
Always and Schedule Record.

Record Schedule
20
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Schedule
Setup Operation
Front Panel & Remote Controller
USB Mouse
Enter Select Item
[Enter]
[Left Click]
Select Channel
[Up/Down]
[Moving mouse wheel]
Select Time&Date
[Up/Down/Left/Right]
[Click/Drag-draw]
Return to Upper Menu
[MENU]
[Right Click] or [Left Click
]
 Copy
(1) Select source (2) Select target (3) Press COPY icon to copy.
8.3 Alarm Setup






8.4
Channel
Select the channel to set. COPY icon can copy the present setting to other channels.
Mode
Enable/disable alarm trigger. Set: On/Off.
Record Duration
The duration of the recording after triggered: 10, 20… 60 sec.
Buzzer Duration
The duration of the buzzer beeping after being triggered: 1, 5, 10, 15, 20, 30 sec.
Alarm Duration
Alarm out after alarm triggered: 1, 5, 10, 15, 20, 30 sec.
Event Popup
The Duration of single channel display after being triggered: 1, 5, 10, 15, 20 sec or off.
Motion Detection
21
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001




Channel
Select the channel to set. COPY icon can copy the present setting to other channels.
Enable
Enable/disable motion detection for each camera. Set: On/Off
Sensitivity
Sensitivity level of motion detection. Set: 1~10. Higher value equal more sensitive.
Motion Area Setup
Setup by each small square.
Setup Operation
Front Panel & Remote Controller
USB Mouse
Area Selection
[Up/Down/Left/Right]
[Moving Cursor]
(1)Move to the area
(2)Press Enter to set the area
[Drag by Left Click]
(1)Move to the area
(2)Press Enter to set the area
[Drag by Left Click]
[MENU]
[Right Click]
Set Detection Area: must set
on none detection
area(Transparent Area)
Clear Detection Area: clear the
set detection area: must set on
detection area(Green Area)
Return to Upper Menu




User Manual
Record Duration
The duration of the recording after triggered: 10, 20… 60 sec. or off.
Buzzer Duration
The duration of the buzzer beeping after being triggered: 1, 5, 10, 15, 20, 30 sec.
Alarm Duration
Alarm out after alarm triggered: 1, 5, 10, 15, 20, 30 sec.
Event Popup
The Duration of single channel display after being triggered: 1, 5, 10, 15, 20 sec or off.
8.5 Network Setup
22
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001









Mode
Set the connection method. Set: Static IP, DHCP, PPPoE.
Media Port
Port used for stream media. Default is port 9000.WEB Port
Port used for web access. Default is port 80.
Command Port
Port used for settings. Default is port 8000.
Mobile Port
Mobile phone port (factory default): 15961.
IP Address
Assigned IP address.
Netmask
Assigned net mask
Gateway
Assigned gateway
PPPOE/3G

PPPoE: Need account and password for PPPoE.

3G: Need account, password, APN and dial number for 3G.
DDNS setting
23
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001





User Manual
DNS1 First Domain Name Server, Default : 168.95.1.1
DNS2 Second Domain Name Server, Default :168.95.192.1
DDNS
Enable/disable Dynamic Domain Name server. Values: On, Off.
DDNS Server
DDNS Server, Values: 3322, dyndns, cctvdvr.
When using DDNSserver, server name and account/password are required.
E-Mail Setting








E-MAIL
Forward E-mail after alarm triggered. Enable: On/Off
SSL
Enable the SSL encryption. Recommend to set on if it is using gmail.
Port
SMTP port number key in. For example, gmail port 465.
Server
SMTP server key in. For example, gmail: smtp.gmail.com
Password
Sender E-mail account password
From
Sender E-mail address key in. For example,
gmail: mail1@gmail.com
To
Receiver E-mail address key in. For example,
gmail: mail2@gmail.com
Interval
When alarm keeps going, the time span to send E-mail. Values: 10, 30, 60
seconds.
8.6 Log Search
24
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001


User Manual
Log type
Set conditions for searching: type and time range. Log type can be ALL, Alarm,
Operation, Motion Detection, and Video Loss.
Start/End time
Set the search range (Year/Month/Day). Press [SEARCH] to search.
Setup Operation
Front & Remote Controller
USB Mouse
Enter Select Item
[Enter]
[Left Click]
Select Item
[Up/Down/Left/Right]
[Moving Cursor]
Return to Upper Menu
[MENU]
[Right click] or [Left click
First Page
Previous Page
Next Page
Last Page
Backup to USB disk
★ When Trigger Recording is marked, click to playback.
8.7 Backup
25
]
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001



User Manual
Channel
Backup all channels or single channel 1-4/8.
Record Type
Select all, normal or alarm.
Start/End time
Select the backup range of time. Press Search to start searching. The record list will
be shown if available and follow [Record list] to backup.
Storage Device Choose
8.8 System
26
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
Time Setup
HDD
Display
System Information
Password
Language
Audio
System Maintenance
8.8.1





8.8.2

Time Setting
Date/Time
Select by using virtual keyboard.
Date Format Setup
Set: YY/MM/DD, MM/DD/YY.
Time Format Setup
Set: 24Hours, 12Hours.
Time Zone Setup
Time Zone setting of DVR.
NTP Setting(Network Time Protocol)
NTP: On or Off
Schedule Time: Using virtual keyboard
NTP server: Using virtual keyboard
HDD Setup
Format
Format the selected HDD
27
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Format HDD






Overwrite
Enable/Disable Overwrite, Values: On/Off.
If Overwrite is enabled, the period can be set as 6, 12, 24, 36, 48, 72 hours
and 7, 15, 30, 60 days.
Pack Time
Set the required packing time frame to allow the system to pack each saving
file under continue recording mode. Pack time setting: 5 min, 10min, 15min,
20min, 30min, and 60min.
HDD Error Buzzer Enable
When the hard drive does not have enough space or something wrong, set
the buzzer on. Values: On/Off.
HDD Error Alarm Enable
When the hard drive does not have enough space or something wrong,
trigger the alarm. Values: On/Off.
USB Disk Info
Format USB Memory Stick
8.8.3
Display Setting
28
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001




User Manual
GUI Display
GUI display mode can be VIDEO or VGA.
Video Switching Time
Set the switching time when switching channels in video mode. Values: 1-99
seconds. (0 sec is Off)
VGA Switching Time
Set the switching time when switching channels in VGA mode. Values: 1-99
seconds. (0 sec is Off)
Switching Sequence
Set the switching sequence of channels.
8CH DVR

Video Margin
Set the display margins of the screen. They are Left, Right, Top and Bottom
with range between 0 - 36.

XGA Resolution
XGA Resolution: 800x600, 1024x768, 1280x1024, 1440x900.
8.8.4 System Information
Provide the firmware version, MAC address, HDD status….
29
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
8.8.5
User Manual
User Password
8CH DVR




8.8.6
Password Setup
Enable/Disable password checking. Values: On/Off (Default)
Administrator account/password can not be blank. And at least 4 characters
for the password.
Administrator account/password
Administrator account allows user to access all of functions.
User account/password
Access rights can be assigned by setting.
Remote ID setup
Can adjust remote control ID to control multiple DVR.
System Language
30
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001


8.8.7

8.8.8

User Manual
Language
Values: Traditional Chinese and English. Auto rebooting after change.
Function Tip
Show function tips below the menu items.
Value: On/Off (Default).
Audio Setting
Audio Volume
Set the volume of audio In/Out. Values: 1-10. (Default: 5)
System Maintenance
Auto maintenance: Set time for auto rebooting. Value: On/Off.
Auto rebooting setting
31
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001

User Manual
F/W update
Please plug the USB memory stick into the USB port on the DVR rear panel
after download the new firmware to the USB memory stick.
Note: the firmware only can be upgraded by using the USB port. Please don’t operate the
system, remove the USB memory stick or remove the power while it is in upgrade
progressing in order to prevent any serious system error. The system will automatic reboot
after upgrade.

Load Setup Default
Load factory default. Refer to [Default Setting].


Reboot the DVR
Reboot the DVR.
ShutDown
System will close the recording file. Please remove the power line manually.
32
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
8. Cell Phone Monitoring Operation

JAVA Script surveillance:
1. The mobile Phone must support JAVA Script
2. To download the JAVA software: open Internet Browser on the mobile phone, and
enter the IP address of the DVR and add /viewer.jar at the end. Example:
http://xx.xxx.xxx/viewer.jar.
3. Execute the application
4. Click on “Add” on the drop down menu to add an IP address.
5. Enter the IP address, user name and the password of the DVR and click on “Save”
6. Enter the correct IP address and click on “Open”
33
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
7. Click on “Connect” to connect to the DVR.
8. Connecting
9. Connected
Menu
Capture
Channel[1~4/8]
10. If fail to connect, please repeat steps 7 to 9.

Android Software install/setup procedure
34
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Before the installation, please check the ”Allow Non-market application” or “unknown
source” checkbox in your mobile phone< PIC 1~2>.
<PIC 1>
< PIC 2>
First method
35
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
1. First, please make sure the PC synchronize software had installed and activated in
your Android mobile phone. And connect your android phone to PC via USB.
2. Install “Castillo player” software player to the Android phone through your
synchronize software. You may see the example below in the case of HTC.
1
<PIC 3>
<PIC 4>
Method two
36
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
You may copy the APK installation package to your mobile phone or memory card, and
then install it through other software.
1. Copy the “Castillo player” software package to your mobile phone through USB or
directly to SD memory card.
2. Download the free APK installation software from Market, for example
APKinstallerc or AppInstaller, here we use AppInstaller for example<PIC 5~6>.
<PIC 5>
<PIC 6>
Run the AppInstaller program, install the APK software package from your SD memory
37
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
card<PIC 7~8>.
<PIC 7>
<PIC 8>
3. After the installation, you may find the “Castillo Player” in your program list, click it
to run the program<PIC 9>.
<PIC 9>
38
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Press the “Setup” button to setup the connection setting <PIC 10>. Enter your
individual configuration<PIC 11>.
<PIC 10>
<PIC 11>
4. After setting complete, enter a name you prefer then click the “Add to my favorite”
checkbox to save the setting<PIC 12~13>.
<PIC 12>
<PIC 13>
39
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Press “Connect” button<PIC 14>, it’ll connect to the DVR according to your setup, and
you may see the DVR picture after the connection established<PIC 15>.
<PIC 14>
5. <PIC 16>Operate instruction below:
<PIC 15>
Connect/Disconnect
Channel
Set up
Display screen
PTZ Zoom/aperture/focal
Snap shot
PTZ direction control
Full screen
<PIC 16>

iPhone software install/setup procedure
1. Download the “Castillo player” in AppStore then install it to your IPhone. <PIC 1~6>
40
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
<PIC 1>
<PIC 4>
User Manual
<PIC 2>
<PIC 3>
<PIC 5>
<PIC 6>
41
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
2. Run the “Castillo Player” after installation<PIC 7>. Press “setup” button to setup the
connection setting<PIC 8>. Enter your individual configuration then press “back” button
to go back to the main screen<PIC 9>.
<PIC 7>
<PIC 8>
<PIC 9>
3. Press “Play” button, then you may see the DVR live view picture after the connection
established <PIC 10~11>.
<PIC 10>
<PIC 11>
42
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
4. <PIC 12> Operate instruction below:
Display screen
Zoom/ape\rture/focal
distance
PTZ direction control
Channel
Connect/Disconnect
Set up
Snap shot
Next page
Full screen
<PIC 12>
43
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001

User Manual
Symbian Software install/setup procedure
1. Copy the Symbian player to your mobile phone or memory card; you may see the
example below in the case of NOKIA. <PIC 1~5>
<PIC 1>
<PIC 2>
<PIC 4>
<PIC 3>
<PIC 5>
44
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
2. Connect the mobile phone to PC via USB, copy the live view software to the
memory card of your mobile phone <PIC 6>.
<PIC 6>
45
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
3. Before the installation, please make sure you had canceled the “Only Signed
Application”, also cancel the “Connection credentials check” <PIC 7~11>.
<PIC 7>
<PIC 8>
<PIC 10>
<PIC 9>
<PIC 11>
4. Enter the folder which you’d saved the live view software “fuho_20110221.sisx”,
46
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
double click to install, follow the instruction to proceed <PIC 12~22>.
<PIC 12>
<PIC 13>
<PIC 14>
<PIC 15>
<PIC 16>
<PIC 17>
<PIC 18>
<PIC 19>
47
<PIC 20>
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
<PIC 21>
User Manual
<PIC 22>
5. After the installation, enter the “Installed Application” and you may see the “Castillo
Player” inside <PIC 23~25>.
<PIC 23>
<PIC 24>
48
<PIC 25>
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
6. Click and run the Castillo Player program <PIC 26~27>.
<PIC 26>
<PIC 27>
7. Press the “Setup” button to setup the connection setting. After setting complete,
click the “Add to my favorite” button to save the setting. Press “Connect” button, it’ll
connect to the DVR according to your setup <PIC 28~32>.
<PIC 28>
<PIC 29>
49
<PIC 30>
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
<PIC 31>
User Manual
<PIC 32>
8. <PIC 33>Operate instruction below:
Display Screen
PTZ direction control
Zoom/ Aperture/
Focal distance
Channel
Connect / Disconnect
Exit
Full screen
Snapshot
Add to
Set up
Next page
<PIC 33>
50
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001

User Manual
Windows Mobile Software install/setup procedure
1. Please install “Microsoft ActiveSync” into the PC before installing CAB software.
2. Execute the Microsoft ActiveSync program in your PC first, and connect the
Windows Mobile SmartPhone to PC via USB, then it’ll synchronize the
SmartPhone and PC.
3. In ActiveSync program, Click “Browse” button to open the mobile device folder
<PIC 1>.
<PIC 1>
4. Copy the .CAB file of Castillo Player to your mobile device folder, or any other
folder according to your individual needs <PIC 2>.
<PIC 2>
51
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
5. Please disconnect the SmartPhone from your PC, and begin the installation below:
6. Execute the Castillo Player CAB install package from the File browser, you may
find it in your mobile device folder <PIC 3~5>.
<PIC 3>
<PIC 4>
<PIC 5>
7. Double click and it’ll begin the installation, follow the instruction for setting up. After
the installation, you may find the “Castillo Player” in your program <PIC 6~10>.
52
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
<PIC 6>
<PIC 7>
<PIC 9>
User Manual
<PIC 8>
<PIC 10>
8. Run the Castillo Player program, press the “Setup” button to setup the connection
setting. After setting complete, enter a name you prefer then click the “Add to my
favorite” checkbox to save the setting. Press OK and Leave to go back to the main
screen <PIC 11~14>.
53
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
<PIC 11>
<PIC 12>
User Manual
<PIC 13>
<PIC 14>
9. Press “Connect” button, it’ll connect to the DVR according to your setup, and you
may see the DVR picture after the connection established <PIC 15~16>.
54
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
<PIC 15>
<PIC 16>
10. <PIC 17>Operate instruction below:
55
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Channel
Connect/Disconnect
Display screen
Snapshot
PTZ Direction Control
control
Zoom/aperture/focal distance
<PIC 17>

Blackberry Software Connect Procedure
1. Blackberry RTSP Connect procedure:
56
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Verify Authentication, website address input format as below
rtsp://(website address)/ch(channel number)?user=(user ID)&pwd=(user
password)
e.g. rtsp://f16.cctvdvr.com.tw:554/ch2?user=2222&pwd=2222
2. Mobile Webpage:
Please enter the ID & password again after you login, or you’ll get black screen of
permission denied as below:
9.
H264 Player Operation
57
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001



User Manual
Preface
H264 Player software allows to playback the backup saving file from the DVR.
System Requirement
Operating System: Windows 2000, XP, Vista, Windows 7.
Program obtainment and installation
While user start to backup the file from DVR, the system will automatically copy the
H264Player.exe file and recorded data to the backup device for example, an USB flash
memory stick.
 Execute the installation file
Step 1: Ask for the Installation
Step4: Install Confirmation
Step 2: Select the Install Location
Step 5: Installation Complete
Step 3: Select Additional Tasks

User Interface
58
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
Open File
Click
Pause
Click
Stop
Click
Play 1x
Click
Fast Forward
Click
Slow Forward
Click
Capture the image
(snap shot)
Click
to the host computer
Volume Control
Drag
Rewind
Click
Step Forward
Click
Mark start time
Click
Mark end time
Click
Backup
Click
Right click the mouse to open the
Pop-up Menu
pop-up menu including Setting,
Language, About H264Player, Exit
10.
Web Operation
59
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001




User Manual
Preface
The Web Application Manager allows the user to remotely monitoring, playback, and
backup through the DVR.
System Requirement
Operating System: Windows 2000, XP, Vista, Windows 7
Web Browser: Internet Explorer
Add-on Installation
Please use the IE browser to login the IP address of DVR setting. If the user is the first
time to login the page, the system will ask the user to download and install the add-on
as you can see the page below. Please click the request to install the ActiveX add-on.
User Interface
 Login Page
Please login user name and password from the setting of DVR end.

Live mode
60
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
Start/Stop the Live Monitoring
Record the Footage to Computer
Snapshot the Image
Enable/Disable Audio
Click
Click
Start recording or
Switch Channel Display
Single/4/8 Display
Stop recording
(saving path: Setup/Information)
Click
to snap shot the image (saving path:
Setup/Information)
Click
under the live viewing mode to enable the
audio, and click
Volume Control
User Manual
to disable
Click
Double click the channel to enter single channel display,
double click again to return.
Click
Speed Dome Preset Point
PTZ Control
Please refer “PTZ” for more information

Playback
61
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
(1) Select Date
Event Search
(2)Click
or
(3)Click
Playback
Click on pop up file list
Fast Forward
Click “Fast Forward” (Speed: 2X,
Rewind
Click “ Rewind” (Speed: 1/2, 1/ 4X, 1/ 8X, 1/ 16X)
Step Forward
Click “Previous”or “Step”
Snapshot
Click
Mark start time
Click
Mark end time
Click
Backup
Click
8X,
16X)
to capture.
Click “Backup”, backup path: Setup System Setting
Backup

4X,
Backup Location
DVR Setting
Cameras
62
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
Please refer “Camera Setup” for more information
Record
Please refer “Record Setup” for more information.
Alarm
63
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
Please refer “Alarm Setup” for more information.
MotionDetection
Please refer “Motion Detection” for more information.
Network setting
64
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
E-MAIL
Log search
65
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001

System Setting
Date/Time Setting
HDD Management
66
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
Display
67
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
System Information
Account/password
68
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
Audio Setting
System Maintenance
69
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001

Host setting
70
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
11. Appendix
This appendix will show you how to do the basic operation step-by-step on search, playback,
backup, network setup, email setup, and DDNS setup.
12.1 How to search and playback the footage step-by-step.
Step 1. Press the SEARCH button
There are two ways to enter the search menu.
Option 1: If you are using the front panel or remote control, please press the “Play” button to
enter the search menu.
Play
Play
Option 2: If you are using USB Mouse, please click right button of the mouse to open the
quick menu bar, and press the “Search” option from the quick menu bar to enter the search
menu.
Search
71
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Step 2. Select the date & time to playback the footage.
Once you enter the search menu, you can have 3 optional selections to playback the footage
as the picture below.
1. Date and Time Search
1.1 Select the channel and type of event that you wish to playback.
1.2 Enter the date & time that you wish to search.
1.3 Click PLAY button to playback.
2. Calendar Search
2.1 Select the specified date from the calendar selection,
2.2 Select the specified time from the 24hours time bar selection.
72
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Note:
 No data: NO color; data of alarm trigger: Red color; normal record data: Green color
st
 Each hour is divided into 2 time frames, 1 and 2
nd
half of the hour, 00min:00sec to 30min:00sec and
30min:00sec to 60min:00sec respectively.
 Select the first half of the time frame of the date, the playback will start from 00 mins: 00 sec. Select the
second half of hour frame under the date, the playback will start from 30mins:00sec. if there is no data on
the date, please try to search from the record list.
2.3 Once you select the specified date and time, click PLAY to playback
3. Record List Search
3.1 Select the date you wish to search.
3.2 Click RECORD LIST to enter record list selection menu.
3.3 Double click the event from the list to playback.
Record
List
Backup Select Check
Box
First Page
Previous Page
Next Page
Back Up
Select All
Last Page
73
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Step 3. Channel Selection.
Check on the channels you wish to playback, and then click PLAY.
12.2 How to backup the footage step-by-step.
Step 1. Click the BACKUP button
There are two ways to enter the BACKUP menu.
Option 1: Click the right button of the mouse to open the quick menu bar, and press the
“BACKUP” option to enter the search menu.
Back Up
Option 2: Click the right button of the mouse to open the quick menu bar and select MAIN
MENU. Press the “Backup” option from the main menu.
Back
Up
74
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Step 2. Specify the desired channels, type, start date and time, and end date and time,
then press SEARCH.
Step 3. Select channels to backup.
3.1 Double click the event to preview the footage before backup.
3.2 Select the events you wish to backup by marking on “BAK” check box.
3.4 Click the backup button
to storage device page.
Record
List
Backup Select Check
Box
First Page
Previous Page
Next Page
Back Up
Select All
Last Page
75
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Step 4. Choose the storage device.
4.1 Plug in the USB flash memory stick into the USB port of DVR.
4.2 Once the DVR detects the USB flash memory stick, it will show the data size and free
space on the screen.
4.3 If there is lack of free space, you may try to format the USB flash memory stick first by
clicking on FORMAT USB DISK
4.4 Once everything is ready, click on BACKUP to proceed.
Step 5. Start Backup the file.
Once you click the “BACKUP” button, the DVR will start to backup. When the processing bar
reaches to 100%, the backup process is completed.
76
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
12.3 How to setup the Network step by step.
Decide your network environment
In Network setting, you can choose the connection type from Static, DHCP, or PPPoE (which
allow you to dial up by ADSL modem or 3G dongle). Below is an explanation of how you can
configure your DVR to fit your network environment.
12.3.1 Static:
Each network device has its own IP address. An IP address is like a doorplate of the device,
helping data to be delivered to the correct destination. An IPv4 address contains 32 bits,
which are divided into four parts, each part separated by a dot, such as 255.255.255.0.
The following three blocks of the IP address space are reserved for private Internets (local
networks):
• 10.0.0.0~10.255.255.255
• 172.16.0.0~172.31.255.255
• 192.168.0.0~192.168.255.255
In Static mode, you have to assign the IP address for each device (e.g. your DVR and PC)
77
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Reference Network environment for Static IP situation
Direct connection:
DVR to PC
(Home/Small office
users)
Multi-connection
through
HUB/SWITCH/Router
(Small Office users)
Here is an example of how to set up connection between the DVR and your PC.
Step 1: Set your DVR network mode to static mode
1. Change the connection type to “STATIC” in DVR’s network setting
2. Assign the IP address to the DVR
Note: Be sure not to set up a duplicated IP address for the DVR. For example, if you assign
192.168.0.100 to the PC, please change the IP address of the DVR to 192.168.0.101
3. Set the Netmask of the DVR:
4. Set the Gateway of the DVR:
The address must be the same as the PC’s setting.
The address must be the same as the PC’s setting.
78
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Step 2: Modify your PC’s network setting to correspond to the DVR
For WINDOWS XP:
StartControl Panel Network and Internet ConnectionsNetwork Connections
Find your network adaptor and click the right button and choose “Properties”
Find “Internet Protocol (TCP/IP)” and click the “Properties” to enter the setting menu
79
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
In the following menu, choose “Use the following IP address” to set up IP address manually
1
2
3
1) Enter the IP address for your PC. Be sure not to set up a duplicated IP address with any
other network devices.
2) Enter Subnet mask address. This address should correspond to the Netmask address of
your DVR.
3) Enter Default gateway address. This address should correspond to the Gateway address
of your DVR.
80
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
For WINDOW 7:
StartControl PanelView network status and tasksclick and enter the next menu
Click “Change adapter settings” at the left column
81
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Find the network adapter and right click the mouse button and click the “Properties” to enter
the setting menu
Find Internet Protocol Version 4(TCP/IPv4) and click “Properties”
82
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
In the following menu, choose “Use the following IP address” to set up IP address manually
1
2
3
1) Enter the IP address for your PC. Be sure not to set up a duplicated IP address with any
other network devices.
2) Enter Subnet mask address. This address should correspond to the Netmask address of
your DVR.
3) Enter Default gateway address. This address should correspond to the Gateway address
of your DVR.
83
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
12.3.2 DHCP:
DHCP (Dynamic Host Configuration Protocol) automatically assigns a valid IP address to a
network device on the Internet. Allocating a fixed IP address for each device will result in idle
IP addresses when the devices are not in operation. Therefore, DHCP can make more
efficient use of the IP addresses. To use this feature, you have to have a PC or router to be
set as DHCP server to provide the service.
Reference Network environment for DHCP situation
DHCP connection through
Router (Home/small office)
DHCP connection through
Router/Server (Corporation)
Here is an example of how to set up connection between the DVR and your PC in DHCP
mode
Step 1: Set up your router/DHCP server.
check the manual of the router.
For details, please consult your MIS staff or
84
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Step 2: Set your DVR network mode to DHCP mode
1
○
1. Change the connection type to “DHCP” in DVR’s network setting
2. If the router is correctly set, the DVR should be able to get the IP address from the router
automatically.
Step 3: Modify your PC’s network setting to DHCP mode
For WINDOWS XP:
StartControl Panel Network and Internet ConnectionsNetwork Connections
Find your network adaptor and click the right button and choose “Properties”
85
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Find “Internet Protocol (TCP/IP)” and click the “Properties” to enter the setting menu
In the following menu, choose “Obtain an IP address automatically”
86
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
For WINDOW 7:
StartControl PanelView network status and tasksclick and enter the next menu
Click “Change adapter settings” at the left column
87
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
Find the network adapter and right click the mouse button and click the “Properties” to enter
the setting menu
Find “Internet Protocol Version 4(TCP/IPv4)” and click “Properties”
88
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
In the following menu, choose “Obtain an IP address automatically”
If the router/DHCP server is set correctly, you should be able to connect to DVR from your PC
successfully.
Note: The IP address assigned to DVR would be varied when the router restarts or after a
period of time. If you want to assign a fixed IP address to the DVR, please check with your
MIS staff or the manual of the router.
12.3.3 PPPoE:
PPPoE (Point-to-Point Protocol over Ethernet) is a protocol that enables connections
between a DSL modem and the Internet. This service is provided by ISP (Internet Service
Provider).
Reference Network environment for PPPoE situation
PPPoE connection through
Hub/Switch/Router
89
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
How to set up a PPPoE connection for your DVR?
Step 1: In Network setting menu, set the mode to “STATIC” and click the “PPPOE” to enter
the setting menu.
Step 2: In PPPoE/3G setting menu, set the mode to “PPPoE” and choose “ON” to enable it.
Note: for account and password information, please check with your internet service
provider.
90
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
12.3.4 How to set up a 3G connection for your DVR?
(Note: for supported USB 3G dongle, please check with the manufacturer for latest information).
Step 1: In Network setting menu, set the mode to “STATIC” and click the “PPPOE” to enter
the setting menu.
Step 2: In PPPoE/3G setting menu, set the mode to “3G” and choose “ON” to enable it.
Note: for dial up information, please check with your telecom company for details.
91
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
12.4 Email Setup
In DVR, you can set up an email reminder for situations like motion, alarm, etc. In the
following section, we will illustrate how to set it up by using Gmail.
Step 1: In Network setting menu, click on “E-MAIL SETUP” and enter the following menu
Step 2: Enable the email function by choosing “ON” in E-mail Tab
Step 3:
○1 SSL: (Secure Sockets Layer) this is used to secure the internet transmission. For Gmail,
you should turn this on. For other email settings, please consult your email service provider.
○2 Port: Default value is 25 and is commonly used for most email server. For Gmail, please
set the value to 00465
○3 Interval: The time interval between each email being sent
○4 Server: your email server. Please be noted that this must be your outgoing email server.
For Gmail, use smtp.gmail.com
○5 Password: your password for your email address
○6 From: Your email address as the mail sender.
○7 To: The email recipient
In Gmail, it’s like xxxx@gmail.com
Note: Not every email server provides the service to relay the email to your email recipient.
Please consult your email service provider for more details.
92
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
12.5 DDNS Setup
DDNS: (Dynamic DNS). It is a service to provide the updating in real time of Internet
Domain Name System (DNS) name servers to keep up to date the active DNS configuration
of their configured hostnames, addresses and other information.
In DVR, you can apply a DDNS service for a dynamic IP address. This will help you to use a
fixed site address (such as name.idv) to find your DVR so you don’t have to remember the
floating IP address (such as 192.168.111.143)
To set up the DDNS service, click on “DDNS Setup” in Network setting menu
DDNS Setting menu
○1 DNS1&2: This is used for your DNS server. The default value is 168.095.192.001 and
168.095.001.001. If you don’t your DNS server provider, just use the default values for
them.
○2 DDNS: To enable the DDNS service. Please select “ON” to enable it.
○3 DDNS SERVER: You can choose DDNS service provider from 3322, dyndns, or cctvdvr
○4 The host name you applied in the DDNS service provider. For example, xxxx.dyndns.org or
xxxx.cctvdvr.com.tw
○5 Username: the username you used for DDNS service.
○6 Password: password you used for DDNS service
93
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
Below we will explain how to apply a DDNS service through Dyndns
1. Go to http://www.dyndns.com
2. Click on Dyndns standard to apply a dyndns account
94
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
3. Press on “ORDER NOW” to start applying
95
User Manual
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
4. Select your wanted Hostname for your DVR
Input your wanted
hostname for your DVR
here.
Note: If you are using firewall or
router to connect DVR, please
set the DDNS setting in
FW/router, then use port
forwarding in order to connect
DVR correctly.
5. When finished, press “Continue” to proceed.
96
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
6. If you have never applied Dyndns service before, please create a new account first.
7. When finished, press “create account” to proceed.
97
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
8. System will send you an email for confirmation.
User Manual
Please go to your email box and see if
you have received it. There will be a link for you to confirm the application.
9. Go to your DVR to set the DDNS setting. (I use IE for demonstration but in the DVR OSD,
you can find the same setting there).
1) Enable your DDNS service.
2) Choose the service to be “dyndns” (depending upon which DDNS provider you use)
3) Input the hostname for the DDNS. (e.g: test.dyndns.org)
4) Input the username for the DDNS. (e.g:test@gmail.com)
NOTE: You might only need to input “test” instead of “test@gmail.com” depending
upon which service provider you use.
5) Input the password for the DDNS
Then you can start using the DDNS service for your DVR
98
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
12. Default Setting
Item
Default Setting
Channel
On
Resolution
Normal
Record
Frame Rate
Real-time
Setup
Quality
Highest
Camera
Item
Audio
Disable
Schedule
Always
Channel 1
CH1
HDD Setup
Time Setup
XGA/Audio
Default Setting
Overwrite
Yes
Pack Time
60 Mins
Date Format
YY/MM/DD
Time Format
24 Hours
Time Zone
GMT+08:00
Daylight Saving
Off
XGA Resolution
800 X 600
Output Volume
5
Channel 2
CH2
Channel 3
CH3
Input Volume
5
Channel 4
CH4
Mode
On
Title Position
Top Left
HDD Loss
On
Display
On
Display Time
On
Setup
Setup
HDD NO
SPACE
On
Video Loss
On
1 sec.
Alarm Output
1 sec.
Hue
25
Post REC
10 sec.
Brightness
25
Buzzer
1 sec.
Contrast
25
E-MAIL
Off
Saturation
25
Switching
Time
Alarm Setup
Camera
Color
E-MAIL
Setup
Setup
Channel
Motion
Detection
Network
Setup
DDNS
Setup
System
Maintenance
Maintenance
Schedule Setup
Off
Off
Type
Off
Sensitivity
5
Protocol
Off
Mode
Static IP
Address
001
Media Port
09000
Baud Rate
9600
Web Port
00080
Tour Time
Off
IP Address
192.168.000.100
Tilt Opposite
Off
NetMask
255.255.255.0
Gateway
192.168.000.001
DNS
168.095.001.001
DDNS
Off
Status
PTZ
99
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
13.
User Manual
HDD Support List
Suggest to install the Hard Driver listed below to make sure the compatibility.
Brand
SEAGATE
HITACHI
Model Number
Capacity
ST3250310CS
250G
ST3320410SV
320G
ST3500418AS
500G
ST3500312CS
500G
ST3750528AS
750G
ST31000424CS
1T
ST3100528AS
1T
ST31500541AS
1.5T
ST31500341AS
1.5T
ST32000542AS
2T
ST3200542AS
2T
HCT721025SLA380
250G
HCT721032SLA380
320G
HCP725050GLA380
500G
HCT721010SLA360
1T
HDHCT721010LAS360
1T
WD3200AVVS
320G
WD3200AAKS
320G
WD5000AVVS
500G
WD5000AAKX
500G
WD5000AAKS
500G
WD10EURS
1T
WD10EVDS
1T
WD10EVVS
1T
WD10EALX
1T
WD15EARS
1.5T
WD20EARS
2T
WD2001FASS
2T
WD
100
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
14. USB Flash Memory Stick Support List
The following recommended flash drives have passed all testing procedures and are
safe to a: backup, b: Playback by PC, and c: update firmware.
Brand
Model Number
Capacity
Jetflash V20
4G
Jetflash V20
8G
Jetflash V30
16G
Jetflash V20
32G
PD1
1G
PD1
4G
PD1
8G
C801
16G
C801
32G
Microvault
8G
Microvault
16G
Cruzer Micro
4G
Cruzer Micro
8G
Cruzer Micro
16G
DTIG2
4G
DTIG2
8G
DTIG2
16G
Transcend
Adata
SONY
SanDisk
Kingston
101
8 Channel H.264 DVR + 4 IR Camera RSVA-11001/RSVA-12001
User Manual
15. Operation System For Mobile Phone Application
Mobile Phone Software
O/S
Version
Android
2.1、2.2、2.3
CastilloPlayer(Android_1.5~2.1).apk
CastilloPlayer(Android_2.2~2.3).apk
iPhone
3.x、4.x
Castillo player
WinMobile
6.5.x
CastilloPlayer_5.0.3.CAB
Symbian
S60 v3 above
CastilloPlayer_5.1.713.sisx
BlackBerry
Support RTSP
None
Protocol
16. 3G Data Rate
Data Transfer Speed (bps)
Brand
Huawei
ZTE
Model
Support Verified
WCDMA (3G)
HSDPA
HSUPA
2Mbps ~ 386kbps
(WCDMA 3.5G)
(WCDMA 3.75G)
E1550
-
3.6M
384k
Yes
Pass
E160G
-
3.6M
384k
Yes
Pass
E1750
-
7.2M
5.76M
Yes
Pass
E220
-
3.6M
384k
Yes
Pass
E156G
-
3.6M
384k
Yes
Pass
E173
-
7.2M
5.76M
Yes
Pass
E1820
-
21.6M
5.76M
Yes
Pass
MF626
-
3.6M
384k
Yes
Pass
MF627
-
3.6M
384k
Yes
Pass
MF631
-
7.2M
5.76M
Yes
Pass
MF637
-
7.2M
5.76M
Yes
Pass
MF112
-
7.2M
2M
Yes
Pass
MF180
-
3.6M
384k
Yes
Pass
102
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising