Baxi | MULTIFIT Solar Collectors | Multifit solar collectors - In-roof tile installation guide

Multifit solar collectors - In-roof tile installation guide
G U I DA N C E N OT E S
Solar Collectors
In-Roof Tile Installation (First Fix)
Please leave these instructions
with the User
© Baxi Heating UK Ltd 2011
Contents
2
© Baxi Heating UK Ltd 2011
1.0
Legislation
3
2.0
General Layout
4
3.0
Icon Quick Reference Guide
5
4.0
Dimensions
6
5.0
Health & Safety
8
6.0
Snow & Wind Load
11
7.0
Optimum Pipework Assembly
12
8.0
Kit Contents and Components
13
9.0
Installation of the Collector
16
10.0
Fixing the Flashing
20
11.0
Maintenance
24
1.0 Legislation
Please note the following instructions regarding laws,
regulations and technical rules.
When setting up solar energy installations, the laws and
regulations at local, state, European and international level that
apply to the country in question must be observed. Generally
acknowledged technical regulations apply; these are usually
formulated in the form of standards, guidelines, provisions,
regulations and technical rules laid down by local and national
bodies, energy supply companies, trade organisations and
technical committees in the relevant fields. The installation of
solar units may require improved rain resistance with regard to
roof, wall and sealing technology and this must be taken into
account accordingly. To meet regulations for the prevention of
accidents, it may be necessary to use safety equipment (straps,
scaffolding, supports, etc.). Such safety equipment is not
supplied and must be ordered separately. Installation must only
be carried out by technically qualified and authorised personnel
with a recognised qualification (verified by a state or national
body) in the relevant technical area.
Use a safety harness when working at height.
The structure of the roof must be assessed for its suitability
prior to commencing work.
This product is unclassified against BS 476-3.
Consult a Structural Engineer if you are unsure of the
collector’s siting.
Loading due to snow may exceed the capability of the
property’s structure.
Wind loads may cause excess forces on the structure and
cause damage.
The Installer is responsible for the suitability of the site and its
sub-structure.
The collector should be sited to avoid damage from falling
debris and vandalism.
All pipe work within this installation must be Earth bonded.
In exposed areas, the collector must be protected against the
risk of lightning.
It is recommended that a minimum of 2 people are used to lift
this product.
The collector must not be lifted by its pipe connections.
Ensure all hydraulic connections are securely fixed and are free
of leaks.
The system must be inspected on completion of the work.
A further inspection is recommended annually.
Avoid installing the collector in shaded areas.
The general recommended torque setting for nuts and bolts is
10Nm.
A separate second array can be installed behind the first if
necessary.
Large arrays will require specialist piping, pump groups and
design.
The collector must not be installed on an uneven roof surface.
Do not apply excessive force when installing the collector.
Hot, exposed surfaces that can be touched must be insulated
to protect against injury.
Lubrication is not required for the ‘O’ ring connections.
© Baxi Heating UK Ltd 2011
3
2.0 General Layout
North
Angle of tilt
90°
90°
80°
80°
70°
70°
60°
60°
50°
50°
40°
40°
30°
30°
20°
20°
10° 10°
West
East
S.W.
S.E.
South
less than optimum by
0-5%
5-10%
10-20%
20° to 55°
100mm
> 350mm
> 500mm
> 500mm
4
© Baxi Heating UK Ltd 2011
3.0 Icon Quick Reference Guide
3A
3B
3C
13mm
3D
3E
3F
3G
3H
3J
3A
- Contents
3B
- Page Reference Number
3C
- Measure
3D
- Specialist Advice Required
3E
- Materials to be Provided by Installer
3F
- Spanner Tight
3G
- Information or Advice
3H
- Screwdriver
3J
- Hammer
3K
- 1 Collector
3L
- 2 Collectors
3M
- Right Hand Side
3N
- Left Hand Side
3P
- Caution
3Q
- Drill / Driver
3R
- Tile Cutter
R/H
3K
3L
L/H
!
3N
3P
© Baxi Heating UK Ltd 2011
3M
3Q
3R
5
4.0 Dimensions
a
174.5
174.5
SOL 200
SOL 200H SOL 250 SOL 250H
390
kg
0
b
d
c
bar
10
!
35kg
36kg
48kg
49kg
10bar
10bar
10bar
10bar
130
e
f
150 /
300mm
a
174.5
174.5
40
390
b
c
d
f
130
e
f
a
174.5
40
40
174.5
390
b
c
130
e
f
6
© Baxi Heating UK Ltd 2011
d
4.0 Dimensions
mm
1
2
3
4
5
mm
Sol 200 Sol 200H Sol 250 Sol 250H
Sol 200 Sol 200H Sol 250 Sol 250H
a
1496
2101
1496
2536
a
7431
11067
7431
13671
b
1753
1147
2187
1147
b
1753
1147
2187
1147
c
1610
1004
2044
1004
c
1610
1004
2044
1004
d
2272
1666
2706
1666
d
2272
1666
2706
1666
e
1147
1753
1147
2187
e
7082
10718
7082
13322
6
f
1289
1895
1289
2329
f
7224
10860
7224
13464
a
2683
3895
2683
4763
a
8618
12860
8618
15898
b
1753
1147
2187
1147
b
1753
1147
2187
1147
c
1610
1004
2044
1004
c
1610
1004
2044
1004
d
2272
1666
2706
1666
d
2272
1666
2706
1666
e
2334
3546
2334
4414
e
8269
12511
8269
15549
7
f
2476
3688
2476
4556
f
8411
12653
8411
15691
a
3870
5688
3870
6990
a
9805
14653
9805
18125
b
1753
1147
2187
1147
b
1753
1147
2187
1147
c
1610
1004
2044
1004
c
1610
1004
2044
1004
d
2272
1666
2706
1666
d
2272
1666
2706
1666
e
3521
5339
3521
6641
e
9456
14304
9456
17776
8
f
3663
5481
3663
6783
f
9598
14446
9598
17918
a
5057
7481
5057
9217
a
10992
16446
10992
20352
b
1753
1147
2187
1147
b
1753
1147
2187
1147
c
1610
1004
2044
1004
c
1610
1004
2044
1004
d
2272
1666
2706
1666
e
4708
7132
4708
8868
9
d
2272
1666
2706
1666
e
10643
16097
10643
20003
f
4850
7274
4850
9010
f
10785
16239
10785
20145
a
6244
9274
6244
11444
a
12179
18239
12179
22579
b
1753
1147
2187
1147
b
1753
1147
2187
1147
c
1610
1004
2044
1004
c
1610
1004
2044
1004
d
2272
1666
2706
1666
e
5895
8925
5895
11095
f
6037
9067
6037
11237
© Baxi Heating UK Ltd 2011
10
d
2272
1666
2706
1666
e
11830
17890
11830
22230
f
11972
18032
11972
22372
7
!
8
© Baxi Heating UK Ltd 2011
5.0 Health and Safety
!
© Baxi Heating UK Ltd 2011
5.0 Health and Safety
9
!
5.0 Health and Safety
!
kg
!
!
!
10
© Baxi Heating UK Ltd 2011
6.0 Snow and Wind Load
!
kg
!
EN1991-1-3:2003
- Standard - Snow Loading
SOL 200/200H/250/250H
- Design limit snow load on the ground = 2.8kN/m2
!
X
NOTE: This limit may be reduced for installations where
abutments create additional risks of drifting or falling snow.
EN1991-1-4:2005
- Standard - Wind Loading
Y
!
X
- Basic wind speed (Vb, o) in m/s
Y
- Maximum height above ground for installation (m)
WARNING: The maximum wind load to be borne by the
mounting structure depends on the height and geographical area
of the site among other factors. This structure must be installed in
accordance with the provisions of the EN1991 standard. Consult
a structural engineer if in doubt.
Limit for in-roof installation for given site basic wind speed
(For co=1)
200
SOL200/200H
SOL250/250H
180
160
140
120
Y
100
80
60
40
20
0
21
22
23
24
25
26
27
28
29
30
31
32
33
X
© Baxi Heating UK Ltd 2011
11
7.0 Optimum Pipework Assembly
n<5
- Tee Piece
SOL 200
- Valve
SOL 250
- Plug
- Air Vent (Optional)
SOL 200H
- Flow
SOL 250H
- Sensor
n>5
SOL 200
SOL 250
SOL 200H
SOL 250H
12
© Baxi Heating UK Ltd 2011
8.0 Kit Contents and Components
BB3
JJ3
AA3
CC3
AA3
- Collector
BB3
- Sensor Elbow
CC3
- End Cap
DD3
- Joining Piece
EE3
- Elbow
FF3
- Plug for Manual Air Vent
GG3
- Tee Piece
HH3
- Clip
JJ3
- Manual Vent (Optional)
KK3
- Auto Air Vent (Optional)
LL3
- Sensor
MM3
- 2m Pipe Kit
NN3
- Straight Connector with fittings
KK3
DD3
EE3
MM3
FF3
© Baxi Heating UK Ltd 2011
GG3
HH3
NN3
LL3
13
8.0 Kit Contents and Components
AA
BB
CC
RR
SS
WW
XX
VV
UU
TT
YY
DD
NN
KK
LL
SOL 250 only
HA
SOL 250 only
JA
PP
JB
HB
JJ
HH
OO
GG
QQ
14
© Baxi Heating UK Ltd 2011
MM
ZZ
FF
EE
A
- One SOL200 Portrait Collector Kit
B
- One SOL250 Portrait Collector Kit
C
- One SOL200H Landscape Collector Kit
D
- One SOL250H Landscape Collector Kit
E
- Two SOL200 Portrait Collector Kit
F
- Two SOL250 Portrait Collector Kit
G
- Two SOL200H Landscape Collector Kit
H
- Two SOL250H Landscape Collector Kit
- Top Panel Landscape SOL200H
J
- SOL200 + 1 Extension Portrait Kit
- Top Panel Landscape SOL250H
K
- SOL250 + 1 Extension Portrait Kit
EE
- Top Corner L/H
L
- SOL200H + 1 Extension Landscape Kit
FF
- Top Corner R/H
M
- SOL250H + 1 Extension Landscape Kit
GG
- Top Infill Section
HH
- Side Lower L/H Portrait SOL200
8.0 Kit Contents and Components
+1
AA
- Intermediate Clamp
BB
- Side Clamp
CC
- Bottom Bracket
DD
- Top Panel Portrait SOL200/250
- Side Lower L/H Landscape SOL200H/250H
AA
BB
CC
DD
EE
FF
GG
HH
HA
HB
JJ
JA
JB
KK
LL
MM
NN
OO
PP
QQ
RR
SS
TT
UU
VV
WW
XX
YY
ZZ
CC3
DD3
EE3
FF3
GG3
HH3
A
6
2
1
1
1
1
1
1
1
1
1
1
5
15
16
14
14
8
4
8
1
2
1
1
1
4
B
6
2
1
1
1
1
1
1
1
1
1
1
1
1
5
15
16
14
14
8
4
8
1
2
1
1
1
4
C
6
2
1
1
1
1
1
1
1
1
1
1
5
15
16
14
14
8
3
8
1
2
1
1
1
4
D
6
2
1
1
1
1
1
1
1
1
1
1
10
20
16
14
14
8
4
8
1
2
1
1
1
4
© Baxi Heating UK Ltd 2011
E
3
6
3
2
1
1
1
1
1
1
1
1
2
1
1
10
30
24
19
19
8
4
8
1
1
2
2
1
1
1
4
F
3
6
3
2
1
1
1
1
1
1
1
1
1
1
2
1
1
10
30
24
19
19
8
5
8
1
1
2
2
1
1
1
4
G
3
6
3
2
1
1
1
1
1
1
1
1
2
1
1
10
30
24
19
19
8
4
8
1
1
2
2
1
1
1
4
H
3
6
3
2
1
1
1
1
1
1
1
1
2
1
1
20
40
24
19
19
8
5
8
1
1
2
2
1
1
1
4
J
3
1
1
1
1
1
5
10
8
5
5
1
1
2
-
K
3
1
1
1
1
1
5
10
8
5
5
1
1
2
-
L
3
1
1
1
1
1
5
10
8
5
5
1
1
2
-
M
3
1
1
1
1
1
10
20
8
5
5
2
1
2
-
HA/HB - Side Lower L/H Portrait SOL250
JJ
- Side Lower R/H Portrait SOL200
- Side Lower R/H Landscape SOL200H/250H
JA/JB
- Side Lower R/H Portrait SOL250
KK
- Side Cover L/H Portrait SOL200
- Side Cover L/H Portrait SOL250
- Side Cover L/H Landscape SOL200H/250H
LL
- Side Cover R/H Portrait SOL200
- Side Cover R/H Portrait SOL250
- Side Cover R/H Landscape SOL200H/250H
MM
- Middle Infill Section Portrait SOL200
- Middle Infill Section Portrait SOL250
- Middle Infill Section Landscape SOL200H/250H
NN
- Bottom Section Portrait SOL200/250
- Bottom Section Landscape SOL200H
- Bottom Section Landscape SOL250H
OO
- Bottom Corner L/H
PP
- Bottom Corner R/H
QQ
- Batten 25 x 75 x 1200 (mm) SOL200/250
- Batten 25 x 75 x 1800 (mm) SOL200H
- Batten 25 x 75 x 2200 (mm) SOL250H
RR
- Wood Screw (75mm)
SS
- Wood Screw (25mm)
TT
- Coloured Waterproof Washer
UU
- Coloured Self Drilling Screw
VV
- Nail
WW
- Flashing Kit Foam (2m)
XX
- Side Flashing Fixing Tab
YY
- Instructions
ZZ
- Bottom Infill Piece
15
9.0 Installation of the Collector
>a
6
7
>d
RR
X1 =
Sol 200
Sol 250
Sol 200H
Sol 250 H
435mm
560mm
260mm
260mm
X2 =
Sol 200
Sol 250
Sol 200H
Sol 250 H
935mm
1185mm
585mm
585mm
85mm
X3 =
Sol 200
Sol 250
Sol 200H
Sol 250 H
1435mm
1810mm
910mm
910mm
QQ
X4
X4 =
Sol 200
Sol 250
Sol 200H
Sol 250 H
2020mm
2460mm
1415mm
1415mm
X3
X4
X2
X3
X2
85mm
X1
QQ
h
16
© Baxi Heating UK Ltd 2011
X1
>h
h
=h
h
>h
=
9.0 Installation of the Collector
80mm
X
> 220mm
W + 80mm
SS
W
CC
X
QQ
X=
X
CC
Sol
200/250
1147mm
Sol
200H
1753mm
Sol
250H
2186mm
CC
CC
CC
CC
© Baxi Heating UK Ltd 2011
17
SS
9.0 Installation of the Collector
SS
BB
AA
DD3
18
© Baxi Heating UK Ltd 2011
9.0 Installation of the Collector
SS
QQ
SS
AA
BB3
BB
LL3
QQ
Seal using High Temperature
UV Stable Sealant
HH3
MM3
EE3
GG3
HH3
!
© Baxi Heating UK Ltd 2011
Seal using High Temperature
UV Stable Sealant
CC3
HH3
19
10.0 Fixing the Flashing
OO
TT
UU
NN
ZZ
PP
TT
UU
TT
UU
HH
MM
HA
HB
20
© Baxi Heating UK Ltd 2011
VV
10.0 Fixing the Flashing
XX
HH
(HA)
(HB)
LL
KK
JJ
(JA)
(JB)
TT
© Baxi Heating UK Ltd 2011
UU
21
!
10.0 Fixing the Flashing
DD
EE
GG
GG
EE
EE
EE
FF
DD
FF
22
© Baxi Heating UK Ltd 2011
GG
10.0 Fixing the Flashing
TT - UU
WW
TT
UU
© Baxi Heating UK Ltd 2011
23
11.0 Maintenance
It is recommended that the following checks are carried out
on an annual basis:
1) Check the collector installation for any signs of damage or
any build up of debris.
2) Check for any corrosion to the collector or the mounting
system and repair if necessary.
3) Check the tightness of the fasteners. Where fasteners
cannot be readily accessed, the overall security of the
collector installation may indicate whether problems exist.
4) Check the fittings and pipe work for any signs of fluid
leakage or damage, including the condition of the pipe
insulation, and repair if necessary. Check inside the building
for any evidence of leaks.
5) Examine the roof tiles around the collector installation for
any damage or deterioration, and repair if necessary.
6) Check for any foliage growth that may cause shading of the
collectors.
7) Where applicable, check the condition of any ballast used
to secure the system.
8) In areas where there may be a build up of dirt on the
collector, only non-abrasive cleaning materials and methods
should be used to clean the collectors and mounting
system components.
All descriptions and illustrations provided in this leaflet have been carefully
prepared but we reserve the right to make changes and improvements in
our products which may affect the accuracy of the information contained in
this leaflet. All goods are sold subject to our standard Conditions of Sale
which are available on request.
M U L T I F IT
A Tr a din g D i v i s i o n o f B ax i H eat i ng U K Lt d ( 3879156)
Brooks House, Coventry Road, Warwick. CV34 4LL
Technical Enquiries 0844 871 1568
Website www.bdrthermea.com
e&oe
© Baxi Heating UK Ltd 2011
UK Comp No 720291002 (4/11)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising