Samsung | SGH SGH-D806 | User guide | Samsung SGH SGH-D806 User guide

Samsung SGH SGH-D806 User guide
SGH-D806
P O R T A B L E
M O B I L E
Q U A D - B A N D
P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
UZFJ1.5_CB_d806_110906_F2_rev_2
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property
of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not
limited to, accessories, parts, or software relating there to (the “Phone System”), is
proprietary to Samsung and protected under federal laws, state laws, and international
treaty provisions. Intellectual Property includes, but is not limited to, inventions
(patentable or unpatentable), patents, trade secrets, copyrights, software, computer
programs, and related documentation and other works of authorship. You may not infringe
or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree
that you will not (and will not attempt to) modify, prepare derivative works of, reverse
engineer, decompile, disassemble, or otherwise attempt to create source code from the
software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), Inc.
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1000 Klein Street
Richardson, TX 75082
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2006 Samsung Telecommunications America, Inc. is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
GH68-12775A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY
PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS",
AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE
OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF
THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
UZFJ1.5_CB_d806_110906_F2_rev_2
Table of Contents
Section 1: Getting Started ...........................................................................7
Activating Your Phone ...............................................................................................8
Powering On or Off the Phone .................................................................................12
Setting Up Your Voice Mail ......................................................................................13
Section 2: Understanding Your Phone ......................................................15
Features of Your Phone ...........................................................................................16
Open View of Your Phone ........................................................................................16
Front View of Your Phone ........................................................................................17
Back View of Your Phone ........................................................................................18
Display Layout ........................................................................................................19
Selecting Functions and Options .............................................................................20
Command Keys ......................................................................................................21
Section 3: Call Functions ...........................................................................23
Making a Call ..........................................................................................................24
Adjusting the Call Volume .......................................................................................25
Answering a Call .....................................................................................................25
Recent Calls ...........................................................................................................26
Quiet Mode .............................................................................................................26
Options During a Call .............................................................................................. 27
Section 4: Menu Navigation ......................................................................30
Menu Navigation .....................................................................................................31
Menu Outline ..........................................................................................................31
Section 5: Entering Text ............................................................................40
Changing the Text Input Mode ................................................................................41
Using T9 Mode .......................................................................................................42
Using Alphabet Mode .............................................................................................. 43
Using Symbols ........................................................................................................43
Using Numbers .......................................................................................................44
Section 6: Understanding Your Contacts ..................................................45
Using Contacts List .................................................................................................46
Adding a New Contact ............................................................................................46
Using Caller Groups ................................................................................................49
Using Speed Dial ....................................................................................................50
My Name Card ........................................................................................................52
Finding My Own Phone Number ..............................................................................52
Management ..........................................................................................................53
Section 7: Messaging ................................................................................55
Types of Messages .................................................................................................56
Using AIM® Messaging Service ..............................................................................56
Creating and Sending New Messages .....................................................................57
Retrieving New Messages .......................................................................................62
Viewing Messages ..................................................................................................62
4
Managing Your Own Message Folders ....................................................................64
Using Message Options ...........................................................................................65
Using Message Templates ......................................................................................66
Deleting Messages .................................................................................................66
Settings ..................................................................................................................67
Memory Status .......................................................................................................70
Section 8: Changing Your Settings .......................................................... 71
Sound Settings .......................................................................................................72
Display Settings ......................................................................................................74
Time & Date Settings ..............................................................................................75
Phone Settings ........................................................................................................76
Network Services ....................................................................................................78
Bluetooth ................................................................................................................81
Security ..................................................................................................................82
Connection Settings ................................................................................................85
Voice Command Settings ........................................................................................85
Reset Settings .........................................................................................................87
Section 9: Multimedia ............................................................................... 88
Audio ......................................................................................................................88
Graphics .................................................................................................................90
Video ......................................................................................................................90
Music .....................................................................................................................91
Games ....................................................................................................................91
Media .....................................................................................................................92
Using the Camera ...................................................................................................92
Using Record Video .................................................................................................97
Starting VoiceSignal ..............................................................................................100
Applications ..........................................................................................................104
Alarm ....................................................................................................................104
Timer ....................................................................................................................111
Stopwatch ............................................................................................................111
World Time ...........................................................................................................112
Record Audio ........................................................................................................112
Other Files ............................................................................................................113
Memory Card ........................................................................................................114
Memory Status .....................................................................................................114
Section 10: WAP ...................................................................................... 115
Launching the WAP Browser .................................................................................116
Access a WAP Site ................................................................................................116
Navigating the WAP Browser .................................................................................116
Using Favorites .....................................................................................................117
Clearing the Cache ................................................................................................118
Section 11: Accessibility ........................................................................ 120
TTY Settings* ........................................................................................................121
Table of Contents
5
Section 12: Health and Safety Information .............................................122
Health and Safety Information ...............................................................................123
UL Certified Travel Adaptor ...................................................................................124
Consumer Information on Wireless Phones ...........................................................124
Road Safety ..........................................................................................................130
Operating Environment .........................................................................................132
Using Your Phone Near Other Electronic Devices ...................................................132
Potentially Explosive Environments .......................................................................134
Emergency Calls ...................................................................................................134
FCC Notice and Cautions .......................................................................................135
Other Important Safety Information .......................................................................135
Product Performance ............................................................................................ 136
Availability of Various Features/Ring Tones ...........................................................137
Battery Standby and Talk Time .............................................................................137
Battery Precautions ..............................................................................................137
Samsung Mobile Products and Recycling ..............................................................138
Care and Maintenance ..........................................................................................138
Section 13: Warranty Information ...........................................................140
Standard Limited Warranty ...................................................................................141
Index..........................................................................................................145
6
Section 1: Getting Started
Topics Covered
• Activating Your Phone
• Powering On or Off the Phone
• Setting Up Your Voice Mail
This section describes how to start using your phone by activating your service and
setting up your voice mail.
Section 1: Getting Started
7
Activating Your Phone
When you subscribe to a cellular network, a plug-in SIM card loaded with your
subscription details, such as your PIN and other optional services.
Removing the Battery
1.
If necessary, power-off the phone by holding down the
power-off image displays.
key until the
2.
Remove the battery cover by 1) pressing the battery lock down and
holding it in position, then 2) slide the battery cover down, as shown.
3.
Remove the battery by lifting up, as shown.
4.
Installing the SIM Card
Important! The plug-in SIM card and its contacts can be easily damaged by scratches or bending. Use
caution when inserting or removing the card and keep all SIM cards out of reach from children.
8
Make sure the gold contacts of the card face into the phone, then slide the SIM card
into the socket.
Removing the SIM Card
To remove the SIM card, slide it away from the handset. See the following
illustration.
Section 1: Getting Started
9
Installing the Battery
1.
Align the battery so that the 3 brass tabs on the end align with the 3 brass
prongs at the bottom of the battery compartment.
2.
Press the battery down until it clicks into place.
3.
Place the battery cover on and slide it into place until it clicks. Make sure
that the battery is properly installed before switching on the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. Use the travel adapter to
charge the battery, and use only Samsung approved batteries and chargers.
Note: You must fully charge the battery before using your phone for the first time. A discharged battery
recharges fully in approximately 3 hours, with the phone off. You can use the phone while the battery is
charging, but this causes the phone to charge more slowly.
10
1.
With the battery in position on the phone, plug the connector of the travel
adaptor into the jack on the left side of the phone.
2.
Plug the adaptor into a standard AC wall outlet. When charging is finished,
unplug the adaptor from the power outlet.
Note: For connection to an electrical supply not located in the U.S., you must use an adaptor of the proper
configuration for the power outlet. Use of the wrong adaptor could damage your phone and void your
warranty.
Note: You must unplug the adaptor before removing the battery from the phone during charging to avoid
damage.
Installing the mircroSD Card (Optional Accessory)
The microSD card stores sounds, images, photos and videos, music, and other files.
To install your microSD card, use the following steps:
1.
With the microSD card slot opened, and the gold contacts facing up, insert
the microSD card into the slot.
Section 1: Getting Started
11
2.
Push the card in until it it clicks into place. Close the microSD card slot.
Removing the microSD Card (Optional Accessory)
To remove the microSD card, use the following steps:
1.
Open the microSD card slot. Use your thumb to press and release the
microSD card. It will pop-out to allow you to remove the card.
2.
Remove the card and close the microSD card slot.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain, a warning tone
sounds and the “Warning Low Battery” message repeats at regular intervals on the
display. The backlight turns off to conserve the remaining battery power. When the
battery level becomes too low, the phone automatically turns off.
Powering On or Off the Phone
12
1.
Open the phone.
2.
Press and hold the
key until the phone power-on screen displays.
3.
If the phone is locked, enter the phone password and press the OK soft
key or the OK / key. The password is preset to “00000000” at the factory.
4.
If the phone asks for a PIN, enter the PIN and press the OK soft key or the
OK / key. For further details, see "PIN Check" on page 83.
The phone searches for your network and after finding it, the Idle screen
appears. Now, you can make or receive calls.
Note: The display language is preset to Automatic at the factory. To change the language, use the
Language menu. For further details, see "Language" on page 76.
5.
When you wish to switch off the phone, press and hold the
the power-off image displays.
key until
Setting Up Your Voice Mail
To access your voice mail from your keypad, use the following steps:
1.
Open the phone to access your keypad.
2.
From an Idle screen, press and hold the
prompts to access messages.
key. Follow the voice mail
Accessing Your Voice Mail
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Highlight Messaging and press the OK / key.
3.
Highlight Voice Mail and press the OK / key.
4.
Highlight Connect to Voice Mail and press the OK soft key or the OK /
key.
5.
Voicemail appears in the display.
6.
Press the OK soft key or the OK / key to dial your phone specified voice
mail number.
7.
When connected, follow the voice prompts from the voice mail center.
Changing the Voice Mail Number
Your SIM card gives you default service number of the voice mail center. However,
you may need to change the number. Use the following procedures to change your
voice mail number.
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Highlight Messaging and press Select soft key or the OK / key.
3.
Highlight Voice Mail and press the Select soft key or the OK / key.
Section 1: Getting Started
13
4.
Highlight Voice Server Number and press the OK soft key or the OK /
key.
5.
Highlight Voicemail and press the OK soft key or the OK / key. Press the
Edit soft key to modify the number.
Note: Pressing the OK / key takes you directly into Edit mode.
14
6.
Enter your new Voice Server number and press the OK soft key to save.
7.
Press the
key to return to Idle mode.
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Open View of Your Phone
• Front View of Your Phone
• Back View of Your Phone
• Display Layout
• Selecting Functions and Options
• Command Keys
This section outlines some key features of your phone. It also displays the screen
and the icons that are displayed when the phone is in use.
Section 2: Understanding Your Phone
15
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many significant features. The
following list outlines a few of the features included in your phone.
User friendly, menu driven access to features and options.
• 1.3 Mega Pixel Camera
• Instant Messaging (IM) Capability
• Multimedia Capability
• Bluetooth Wireless Technology
• Voice Command Feature
• Speakerphone Capability
• Personal Assistant feature provides alarms, calendar, calculator, timer, stopwatch,
record audio, world time, and converter.
Open View of Your Phone
The following illustrations show the main elements of your phone:
9. Earpiece
1. Display
8. Navigation key
OK /
7. WAP Browser/Menu confirm key
2. Voicemail key
6. Alphanumeric keypad
3. Asterisk/
Shift key
5. Pound/Space/Quiet Mode key
4. Microphone
16
Keys
The following list correlates to the open and front view illustrations.
1.
Display: This screen displays all the information needed to operate your
phone.
2.
Voicemail key: Press and hold to automatically dial your voicemail.
Asterisk/Shift key: Enters the character for calling features. In text
mode, press to change the character input type.
3.
*
Microphone: The Microphone allows the other callers to hear you clearly
when you are speaking to them.
5. Pound/Space/Quiet Mode key: Enters the pound [#] character for calling
features. In text entry mode, press to enter a space between characters.
Press and hold to place handset in Quiet mode.
4.
6.
Alphanumeric keypad: Use these keys to enter numbers, letters and
characters.
7.
WAP Browser/Menu confirm key: When navigating through a menu
accepts the highlighted choice in the menu. If you press once in Idle mode,
the WAP browser will launch.
8.
Navigation key: This key allows you to scroll through phone menu options
and provides a shortcut to phone functions from standby mode.
9.
Earpiece: The earpiece allows you to hear the other caller.
Front View of Your Phone
1. Headset/Power
connector
7. microSD card slot
2. Volume/Menu
Navigation key
3. Soft key (right)
3. Soft key (left)
OK /
4. Send key
6. End key
5. Clear key
Section 2: Understanding Your Phone
17
Keys
The following list correlates to the closed view illustrations.
1.
Headset connector/Power connector: Allows you to plug in a headset for
safe, convenient, hands-free conversations. The power interface
connector is used to plug in the charging accessories.
2.
Volume/Menu Navigation key: Allows you to adjust the ringer volume in
standby mode or adjust the voice volume during a call. The volume key
can also be used to scroll up or down to navigate through the different
menu options. To mute the ringer during an incoming call, press the
volume key up or down.
3.
Soft key: Performs the functions indicated by the screen text on the
bottom of the display.
4.
Send key: Allows you to place or receive a call. In standby mode, press
the key once to access the Recent Call log. If you press and hold the key
down, you will initiate the most recent call from the Recent Call log.
5.
Clear key: Deletes characters from the display when you are in text entry
mode. When in a main menu, press to return to the previous menu.
6.
End key: Ends a call. Press and hold this key for a few seconds to power
your phone On or Off. While in the main menu, it returns the phone to
standby mode and cancels you input. When you receive an incoming call,
press to reject call.
7.
microSD card slot: additional storage for MP3 and Graphic files.
Back View of Your Phone
&DPHUD/HQV
18
1.
Camera Lens: The camera lens used for taking photos and videos.
Back Light
A back light illuminates the display and the keypad when you press any key or open
the phone. It turns off when no keys are pressed within a given period of time, and/
or dims the light, depending on the settings in the Back Light menu.
Display Layout
The display has 3 areas:
G
Icons
Text and graphics area
Menu
Camera
Soft key function indicators
Icons
Shows the received signal strength. The greater the number of
bars, the stronger the signal.
Appears when a new text message has been received.
Appears when a new voice mail has been received.
Appears when a new multimedia message has been received.
Appears when you set an alarm to ring at a specified time. For
details, see page “Alarm” on page 104.
Appears when there is no network coverage available.
Appears when a call is in progress.
Section 2: Understanding Your Phone
19
G
Appears when you are connected to a WAP service.
Appears when the Call Forwarding feature is active. For details,
see page “Call Forwarding” on page 78.
Appears when incoming call Alert Type is set to Vibration.
Appears when an incoming call Alert Type is set to Vibration &
melody.
Appears when an incoming call Alert Type is set to Vibration
then Melody.
Appears when Quiet Mode, Silent All is active.
Appears when Quiet Mode, Vibration All is active.
Shows the level of your battery. The more bars you see, the
more power you have remaining.
Bluetooth feature is active.
Indicates that a microSD card is inserted in the handset.
Selecting Functions and Options
Your phone offers a set of functions that can be customized for your ease and
specific needs. These functions are arranged in menus and sub-menus, accessed
using the two soft keys. Each menu and
sub-menu allows you to view and alter the settings of a particular function.
In some functions, you may be asked for a password or PIN. Enter the code and
press the OK soft key or the OK / key.
When you access a list of options, your phone highlights the currently active option.
If, however, there are only two options, such as On/Off or Enable/Disable, your
20
phone highlights the option that is not currently active, so that you can select it
directly.
Selecting Options
To view the various functions and options available and to select the one you want:
• Press the appropriate soft key.
• To select the function displayed or the option highlighted, press the Select soft key
or the OK / key.
• To view the next function or highlight the next option on a list, press the Down key
or the
key on the left side of the phone.
• To move back to the previous function or option on a list, press the Up key or the
key on the left side of the phone.
• To move back up one level in the menu structure, press the Left navigation key or
the Back soft key.
• To exit the menu structure without changing the settings, press the
key.
Command Keys
Functions for the soft keys are defined by what appears above each in the display.
There are two soft keys, the left soft key
and the right soft key
.
Soft Keys
The roles of the soft keys vary depending on the function you are currently using; the
labels on the bottom line of the display just above each key indicate their current
role.
Left Soft Key
Some functions of the left soft key are as follows.
• In the Idle screen, press the Menu (left) soft key
to open the Menu screen.
• When in a menu mode the left soft key
function is Select.
Right Soft Key
Some functions of the right soft key are as follows.
• In the Idle screen, press the Camera (right) soft key
to launch the Camera.
• When in a menu mode the right soft key
function is Back.
Clear Key
The CLR key
is used to erase or clear numbers, text, or symbols from the
display. You can also use
to return to a previous menu or to return to standby
mode from any menu.
• If you enter an incorrect character, briefly press
to backspace (and delete)
the character.
Section 2: Understanding Your Phone
21
• To erase the entire sentence, press and hold
• To back up one menu level, briefly press
.
.
End Key
The End key
is used to turn on/off your phone, disconnect calls, and return to
the standby mode.
• Press and hold the End key
to turn on your phone.
• Briefly press
once to disconnect a call.
• Press
to return to standby mode from any menu, or to cancel the last input.
Send Key
The Send key
is used to answer calls, dial calls, and to recall the last
number(s) dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
to make a call.
• Briefly press
in standby mode to display a list of recent calls to and from your
phone.
• Press
• Press
twice in standby mode to call the most recent number.
to pick up a waiting call. Press
again to switch back to the other
call.
Navigation Key
Use the directional keys on the navigation key to browse menus, sub menus, and
lists. Press the up or down navigation when jumping to highlighted links on the web.
Each key also acts as a shortcut to launch applications. The following illustration
shows the default settings for the navigation keys, but all navigation keys are user
definable. To set the shortcut key functions see “Shortcut” on page 77.
Create Text Message
Voice Command
OK /
MP3 Player
Contact List
* All shortcut keys are user definable
22
Section 3: Call Functions
Topics Covered
• Making a Call
• Adjusting the Call Volume
• Answering a Call
• Recent Calls
• Quiet Mode
• Options During a Call
This section describes how to make or answer a call. It also includes the features
and functionality associated with making or answering a call.
Section 3: Call Functions
23
Making a Call
When the Idle screen displays, enter the area code and phone number, and press the
key.
Note: When you activate the Auto Redial option in the Extra Settings menu, the phone will automatically
redial up to 10 times when the person does not answer the call or is already on the phone. See page “Extra
Settings’ on page 77 for further details.
Making an International Call
key. The + character appears.
1.
Press and hold the
2.
Enter the country code, area code, and phone number. Press the
key.
Correcting a Dialed Number
Use the following steps to correct a mis-typed entry when dialing.
After dialing a number
䢇 To clear the last digit displayed, press the
key.
䢇 To clear another digit in the number, press the Left or Right navigation key until
the cursor is immediately to the right of the digit to be cleared. Press the
key.
䢇 To enter a missing digit press the Left or Right navigation key until the cursor is
in position and enter the digit.
䢇 To clear the whole display, press and hold the
key.
2. Press the
key to return to the Idle screen.
1.
Ending a Call
When you want to finish your call, briefly press the
key.
Redialing the Last Number
All incoming, outgoing and missed calls are listed in the Recent Calls Menu. If the
number or caller is listed in your Contacts, the name associated displays.
To access the Recent Calls menu:
24
1.
From the Idle Screen, press
Menu. Use the navigation keys to
highlight Recent Calls and press
Select. All Calls is highlighted.
Press the OK / key. Or, from the Idle Screen, press the
key to display
a list of the most recent numbers used in the order you dialed or received
them.
2.
Use the Up and Down navigation keys to scroll through the numbers until
the number you want highlights.
3.
Use the Left and Right navigation keys to scroll through the Recent Calls
options. Choose from All Calls, Missed Calls, Calls Made, or Calls
Received.
4.
To dial the number, highlight the number and press the
key.
Making a Call from the Contacts
You can store phone numbers that you use regularly on the SIM card or in the
phone’s memory. These entries are collectively called the Contacts.
Once you have stored a number in the Contacts, you can dial it by pressing a few
keys using the Speed Dial feature.
For further details about the Contacts feature, see “Finding a Contacts List Entry’ on
page 46.
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume, use the Volume keys on the
left side of the phone.
Press the
key to increase the volume level and the
key to decrease the level.
In Idle mode, you can also adjust the ringer volume using these keys.
Answering a Call
When a call is received the phone rings and displays the caller’s phone number, or
name if stored in the Contacts.
1.
From the Idle Screen press the
the incoming call.
key or the Accept soft key to answer
If the Anykey Answer option in the Extra Settings menu is activated, you
can press any key to answer a call except the
key and the Reject soft
key.
Note: To reject an incoming call, press and hold the Volume keys on the left side of the phone before
opening the phone. A quick press of side volume key silences ringer on incoming call.
2.
End the call by closing the phone or by pressing the
key.
Note: You can answer a call while using the Contacts or menu features. After ending the call, the phone
returns to the function screen you were using.
Section 3: Call Functions
25
Recent Calls
The phone stores the numbers of the calls you’ve dialed, received, or missed in the
Recent Calls menu. If the number or caller is listed in your Contacts, the name
associated displays.
Viewing Missed Calls
The number of calls you have missed displays on the Idle screen when a call is
missed. To view the number details, use the following steps:
1.
If the phone is closed, slide open the phone.
2.
Press the View soft key or the OK / key. The most recent missed call
displays.
Note: If there is an email or voicemail sent by the same number, associated icons display and can be
selected.
3.
To scroll through the missed calls, press the Up or Down navigation key.
Deleting a Missed Call
To delete a missed call entry, use the following steps:
1.
Immediately after missing a call, press the View soft key or the OK / key.
2.
Press the Options soft key and select Delete. Press the Select soft key, or
the Right navigation key, or the.OK / key to display a submenu.
3.
Highlight Selected.
Alternatively, to delete all of the numbers, select All.
4.
Press the Select soft key or the OK / key to delete the number(s).
5.
At the “Delete?” prompt, press the Yes soft key to confirm deletion or No
to cancel.
You can press the
key at any time to exit the Missed Call feature.
Quiet Mode
Quiet mode is convenient when you wish to stop the phone from making noise, in a
theater for example.
In Idle mode, press and hold the
key until the “Vibration All Activated”
message and the
Quiet Mode icon displays.
In Quiet mode, your phone will vibrate and light up the LCD display or just light the
LCD display depending on the setting in the Silent All feature.
26
To exit and reactivate the previous sound settings, press and hold the
key
again until “Exit Quiet Mode” displays. The
Quiet Mode icon no longer displays.
Note: Setting for Quiet Mode can be set to Silent All.
Options During a Call
Your phone provides a number of control functions that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can also make
another call while you have a call in progress if your network supports this service.
To put a call on hold:
1.
While on a call, press the left soft key Options. Highlight Hold and press
the Select soft key. The call is on hold.
2.
You can reactivate the call whenever you want, by pressing the Resume
soft key.
To make a call while you have a call in progress:
1.
Place the call on hold using the previous procedures, and enter the phone
number that you wish to dial or look it up in the Contacts.
2.
Press the
put on hold.
key to dial the second call. The first call is automatically
When you have an active call and a call on hold, you may switch between the two
calls, changing the one on hold to active and placing the other on hold. To switch
between the two calls, simply press the Swap soft key. The current call is placed on
hold and the call on hold is reactivated so that you can continue conversing with that
person.
In Call Options
During a call, press the Options soft key to access the following:
• Hold: Places the call on hold.
• Mute: Mutes the microphone for the selected call.
• Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you
have selected.
• New Call: Places current call on hold to allow another call to be placed.
• Contact List: Access the Contacts for phone information.
• Messaging: Launches the text message screen.
• Menu: Access the phone’s Menu.
Section 3: Call Functions
27
If you are in a multi-party call, the following options also display.
• Join: Joins the calls you have established with your phone.
• Transfer: Transfers the call to another number entered.
When you want to finish, end each call normally by pressing the
key.
Speakerphone
When receiving a call or during a call, you can enable the speakerphone feature. Use
the following steps:
1.
When a new call is received, or during a call, press the OK / key to enable
the speakerphone feature.
2.
Select the Yes soft key to enable the speakerphone, or the No soft key to
continue using the earpiece.
3.
Press the OK / key to switch from speakerphone to earpiece. Enter Yes or
No at the prompt.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that the other person
cannot hear you.
Example: You wish to say something to person in the room, but do not want the person on the phone to hear
you.
During a call, to switch the microphone off temporarily:
Press the
Mute soft key.
To switch the microphone back on:
Press the
Unmute soft key.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If the Mute Keys option is
selected, your phone does not transmit the DTMF (Dual Tone Multi-Frequency) tones
of the keys, which allows you to press keys without hearing annoying key tones
during a call.
Note: To communicate with answering machines or computerized telephone systems, the Send Keys option
must be selected.
Searching for a Number in Contacts
You can search for a number in Contacts during a call.
1.
28
Press the Options soft key.
2.
Press the Down key to highlight the Contact List option.
3.
Press the Select soft key or the OK / key.
The Contacts entries are listed.
4.
If you enter the first few letters of the name, the Contacts entries are listed
starting with the first entry matching your input.
5.
To view the highlighted entry, press the OK / key.
For further details about the Contacts feature, see “Finding a Contacts List Entry’ on
page 46.
Call Waiting
The Call Waiting feature allows you to answer an incoming call while you have a call
in progress, if this service is supported by the network, and you have set the Call
Waiting-Voice Calls Menu to Activate. You are notified of an incoming call by a call
waiting tone.
To answer a call while you have a call in progress:
1.
Press the
key or the Accept soft key to answer the incoming call.
The first call is automatically put on hold.
2.
To switch between the two calls, press the Swap soft key.
To end the current call, press the
key.
Section 3: Call Functions
29
Section 4: Menu Navigation
Topics Covered
• Menu Navigation
• Menu Outline
This section explains the menu navigation for your phone. It also includes an
outline of all the available menus associated with your phone.
30
Menu Navigation
Menus and sub-menus can be accessed by scrolling using the Navigation keys or by
using the shortcut keys.
Accessing a Menu Function by Scrolling
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Scroll using the Navigation keys to reach a main menu Settings for
example. Press the Select soft key or the OK / key to enter the menu.
3.
If the menu contains sub-menus, Phone Settings for example, you can
access them by highlighting the option and by pressing the Select soft key
or the OK / key.
If the menu that you have selected contains further options, repeat this
step.
4.
To scroll through the menus, press the Up or Down navigation key or the
Volume key (located on the left side of your phone).
5.
Press the Select soft key, or the OK / key to make your selection.
6.
To return to the previous menu level, press the Back soft key, the
key or the Left Navigation key.
7.
To exit the menu without changing the settings, press the
key.
Using Shortcuts
Numbered menu items, such as menus, sub-menus, and options can be quickly
accessed by using their shortcut numbers. In Menu mode, Main Menus can be
accessed by pressing the number keys (1 to 0) corresponding to their location on the
screen.
Example: Accessing the Language menu.
1.
Press the Menu soft key.
2.
Press the
key for Settings.
3.
Press the
key for Phone Settings
4.
Press the
key for Language.
The available languages are displayed.
Menu Outline
The following list shows the menu structure and indicates the number assigned to
each option.
Section 4: Menu Navigation
31
Note: If you use a SIM AT card that provides additional services, the SIM AT menu displays when you press
the Menu soft key to enter Menu mode. For further details, see your SIM card instructions.
1
Recent Calls
1.1
1.2
1.3
1.4
1.5
1.6
2
All Calls
Missed Calls
Calls Made
Calls Received
Delete All
Call Time
Internet
2.1
2.2
2.3
2.4
2.5
Home
Favorites
Go to URL
Browser Profiles
Clear Cache
3
Games
4
Applications
4.1
4.2
32
Alarm
Calendar
4.2.1 Month View
4.2.2 Week View
4.2.3 Day View
4.2.4 Schedule
4.2.5 Anniversary
4.2.6 Miscellaneous
4.3
4.4
4.5
4.2.7 Missed Alarm Events
Task
Note
Tools
4.5.1 Calculator
4.5.2 Converter
4.5.2.1
4.5.2.2
4.5.2.3
4.5.2.4
4.5.2.5
4.5.2.6
Currency
Length
Weight
Volume
Area
Temperature
4.5.3 Timer
4.5.4 Stopwatch
4.5.5 World Time
5
Messaging
5.1
AIM*
5.1.1
5.1.2
5.1.3
5.1.4
Sign On
Saved Conversations
Offline Conversations
Settings
5.1.4.1
5.1.4.2
Profile Settings
Community Settings
5.1.5 Help
5.1.5.1
5.1.5.2
5.2
Service Provider Info.
Help Text
Create New Message
5.2.1 Text Message
5.2.2 Multimedia Message
Section 4: Menu Navigation
33
5.3
5.4
5.5
5.6
5.7
My Messages
5.3.1 Inbox
5.3.2 Sent
5.3.3 Outbox
5.3.4 Drafts
5.3.5 My Folders
Templates
Voice Mail
5.5.1 Connect to Voice Mail
5.5.2 Voice Server Number
Delete All
Settings
5.7.1 AIM*
5.7.1.1
5.7.1.2
Profile Settings
Community Settings
5.7.2 Text Message
5.7.2.1
5.7.2.2
5.7.2.3
Send Settings
Current Profile
Text Message Profile
5.7.3 Multimedia Message
5.7.3.1
5.7.3.2
5.7.3.3
5.8
6
34
5.7.4 Push Message
5.7.5 Broadcast*
Memory Status
Media
6.1
6.2
Send Settings
Retrieve Settings
Profile
Camera
MP3 Player
6.3
6.4
7
Voice Command
Record Audio
File Manager
7.1
7.2
7.3
7.4
7.5
Audio
7.1.1 Get Tones
7.1.2 Downloaded Audio
7.1.3 Record
7.1.4 Recorded Audio
7.1.5 Favorite Audio
7.1.6 Default Ringtones
7.1.7 Memory Card**
Graphics
7.2.1 Get Graphics
7.2.2 Downloaded Graphics
7.2.3 Photos
7.2.4 Favorite Graphics
7.2.5 Default Wallpapers
7.2.6 Memory Card**
Video
7.3.1 Downloaded Video
7.3.2 Video Clips
7.3.3 Favorite Video
7.3.4 Memory Card**
Music
7.4.1 My Music
7.4.2 Memory Card**
Other Files
7.5.1 Other Files
Section 4: Menu Navigation
35
7.6
7.7
7.5.2 Memory Card**
Memory Card**
Memory Status
7.7.1 My MEdia
7.7.1.1
7.7.1.2
Phone
Memory Card**
7.7.2 Games
7.7.3 Applications
7.7.3.1
7.7.3.2
7.7.3.3
8
Contacts
8.1
8.2
8.3
8.4
8.5
8.6
8.7
36
Calendar
Task
Note
Contact List
Add New Contact
8.2.1 Phone
8.2.2 SIM
Group
Speed Dial
My Name Card
Own Number
8.6.1 Voice Line 1
8.6.2 Voice Line 2
8.6.3 Data
8.6.4 Fax
Management
8.7.1 Default Saving
8.7.2 Copy All to Phone
8.7.3 Delete All
8.7.4 Memory Status
9
Settings
9.1
Sound Settings
9.1.1 Incoming Call
9.1.2 Keypad Tone
9.1.3 Message Tone
9.1.3.1
9.1.3.2
9.1.3.3
9.2
9.1.4 Power On/Off
9.1.5 Slide Tone
9.1.6 Quiet Mode
9.1.7 Extra Tones
Display Settings
9.2.1 Wallpaper
9.2.1.1
9.2.1.2
9.2.1.3
9.2.1.4
9.2.1.5
9.2.2
9.2.3
9.2.4
9.2.5
9.2.6
Get Graphics
Downloaded Graphics
Photos
Favorite Graphics
Default Wallpapers
Info Display
Skin
LCD Brightness
Back Light
Dialing Display
9.2.6.1
9.2.6.2
9.2.6.3
9.3
9.4
Text Message
Multimedia Message
Broadcast*
Font Size
Font Color
Background Color
9.2.7 Idle Screen Setting
Time & Date
Phone Settings
Section 4: Menu Navigation
37
9.5
9.4.1 Language
9.4.2 Greeting Message
9.4.3 Slide Settings
9.4.4 Shortcut
9.4.5 Extra Settings
Network Services*
9.5.1 Call Forwarding
9.5.1.1
9.5.1.2
9.5.1.3
9.5.1.4
9.5.1.5
Forward Always
Busy
No Reply
Unreachable
Cancel All
9.5.2 Call Barring
9.5.3 Call Waiting
9.5.3.1
9.5.3.2
9.5.3.3
9.6
9.5.4 Network Selection
9.5.5 Caller ID
9.5.6 Closed User Group
Bluetooth
9.6.1 Turn Bluetooth On/Off
9.6.2 My Devices
9.6.3 My Phone’s Visibility
9.6.4 My Phone’s Name
9.6.5 Secure Mode
9.6.6 Bluetooth Services
9.6.6.1
9.6.6.2
9.6.6.3
9.6.6.4
38
Voice Calls
Data Calls
Cancell All
Headset
Handsfree
Serial Port
Dial up
9.6.6.5
9.6.6.6
9.7
9.8
9.9
File Transfer
Object Push
Security
9.7.1 PIN Check
9.7.2 Change PIN
9.7.3 Phone Lock
9.7.4 Change Password
9.7.5 Privacy
9.7.6 SIM Lock
9.7.7 FDN Mode
9.7.8 Change PIN2
Connection Settings
Voice Command Settings
9.9.1 Choice lists
9.9.2 Sensitivity
9.9.3 Digit Dialing
9.9.3.1
9.9.3.2
Adapt Digits
Reset Digits
9.9.4 Sound
9.9.4.1
9.9.4.2
9.9.4.3
9.9.4.4
9.9.4.5
9.0
Prompts
Digits
Names
Name Settings
9.9.4.4.1
Speed
9.9.4.4.2
Volume
Speakerphone
9.9.5 About
Reset Settings
* Shows only if supported by your SIM card or Wireless Provider.
** Shows if you have a microSD card inserted.
Section 4: Menu Navigation
39
Section 5: Entering Text
Topics Covered
• Changing the Text Input Mode
• Using T9 Mode
• Using Alphabet Mode
• Using Symbols
• Using Numbers
This section outlines how to select the desired text input mode when entering
characters into your phone. This section also describes how to use the T9
predictive text entry system to reduce the number of key strokes associated with
entering text.
40
Changing the Text Input Mode
The Text Input option switches the key entry functions from T9 Mode, ABC Mode,
Numeric Mode, and Symbols Mode.
T9 Mode
This mode allows you to enter words with only one keystroke per letter.
Each key on the keypad has more than one letter; for example, pressing
the 5 key can enter J, K, or L. However, the T9 mode automatically
compares the series of keystrokes you make with an internal linguistic
dictionary to determine the most likely word, thus requiring far fewer
keystrokes than the traditional Alphabet mode.
Alphabet Mode
This mode allows you to enter letters by pressing the key labeled with the
letter you want. Press the key once, twice, three, or four times until it
displays.
Numeric Mode
This mode allows you to enter numbers.
Symbols Mode
This mode allows you to enter symbols, such as punctuation marks.
When you are in a field that allows characters to be entered, you will notice the text
input mode indicator on the display.
Text Input
Mode Indicator
1.
To change the text input mode, press the
2.
Choose from the following options:
key.
: Alphabet mode
: Numeric mode
: T9 mode
Section 5: Entering Text
41
Note: In Alphabet mode press and hold the
key to access and exit T9 mode.
: Symbol mode
Note: Press and hold the
key to access Symbol mode. Press the number key corresponding to the
symbol you want to enter. Use the Up and Down navigation keys to scroll through the available symbols.
Press the Back soft key to exit.
Using T9 Mode
T9 Predictive Text input mode is based on a built-in dictionary.
Enter a Word in T9 Mode
In T9 mode, begin entering a word by pressing the 2 to 9 keys. Press each
key only once for each letter. The built-in dictionary lists words that match
the keystrokes you have entered.
Example: To enter “Hello”, press
,
,
,
,
The word that you are typing appears in the display. It may change with
each key that you press.
3.
Enter the whole word before editing or deleting the keystrokes.
4.
When the word displays correctly, go to step 4.
If the word doesn’t display correctly, press the
key to display
alternative word choices for the keys that you have pressed.
Example: Both “Of” and “Me” have the
choice first.
5.
and
keys. The phone displays the most commonly used
Insert a space by pressing the
key and start entering the next word.
Add a New Word into the T9 Dictionary
1.
After pressing the keys corresponding to the word you want to add, press
the
key to display the alternative words.
2.
When the last alternative word is displayed, Add displays. Press the Add
soft key or the OK / key.
3.
Enter the word you want to add using ABC mode.
4.
Press the OK soft key or the OK / key.
The word is added to the T9 dictionary and becomes the first word for the
associated keypress series.
42
Note: This feature may not be available for some languages.
䢇
䢇
䢇
To enter periods, hyphens, colons, or parenthesis, press the
key. T9 mode
applies grammar rules to ensure that correct punctuation is used.
To shift case in T9 mode, use the
key. There are 3 cases: Initial capital,
Capital lock, and Lower case.
You can move the cursor by using the Left and Right keys. To delete letters, press
the
key. Press and hold the
key to clear the display.
Using Alphabet Mode
To use the Alphabet Mode use the
to
keys to enter your text.
Press the key labeled with the letter you want:
䢇 Once for the first letter
䢇 Twice for the second letter
䢇 And so on
2. Select the other letters in the same way.
1.
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or
a different letter on the same key, just wait for a few seconds for the cursor to move to the right
automatically, and then select the next letter.
Keys
•
•
•
•
•
•
•
•
•
•
Using Symbols
Symbol mode enables you to insert symbols and punctuation marks into text.
key.
1.
To enter symbol mode press and hold the
2.
To select a symbol, press the corresponding number key.
3.
To display more symbols, press the Up or Down Navigation key.
Section 5: Entering Text
43
4.
To clear the symbol(s), press the C key. When the input field is empty, this
key returns the display to the previous mode.
5.
To insert the symbol(s) into your message, press the OK soft key or the
OK / key.
Using Numbers
Number mode enables you to enter numbers into a text message. Press the keys
corresponding to the digits you want to enter.
44
Section 6: Understanding Your Contacts
Topics Covered
• Using Contacts List
• Adding a New Contact
• Using Caller Groups
• Using Speed Dial
• My Name Card
• Finding My Own Phone Number
• Management
This section allows you to manage your daily contacts by storing their name and
number in your Contacts. Contacts entries can be sorted by name, entry, or group.
Section 6: Understanding Your Contacts
45
Using Contacts List
Dialing a Number from Contacts List
Once you have stored phone numbers in the Contacts List, you can dial them easily
and quickly by using the location numbers that were assigned to them in the
Contacts List.
Finding a Contacts List Entry
You can store phone numbers and their corresponding names in your SIM card and
phone’s memories. They are physically separate but are used as a single entity,
called Contacts.
Depending on your particular SIM card, the maximum number of phone numbers the
SIM card can store may differ.
1.
When the Idle screen displays, press the Menu soft key. Highlight
Contacts, and press the Select soft key or the OK / key.
2.
Select Contact List and press the Select soft key or the OK / key.
3.
Enter the first few letters of the name.
The Contacts entries are listed, starting with the first entry matching your
input. To select a different entry, press the Up or Down Navigation key
until the entry you want is highlighted.
4.
Once you have found the entry, press the
key to dial the number, or
press the Options soft key to access the Contacts entry options.
Using Contacts Entry Options
While accessing any Contacts entry, press the Options soft key to use the options for
the entry.
The following options are available:
• View: allows you to view details for the Contacts entry.
• Send Message: allows you to send a text or multimedia message to the Contacts
entry.
• Add New Contact: allows you to add a new entry to the Contacts. Choose Phone or
SIM storage location.
• Delete: allows you to delete the Selected or All phone book entries.
Adding a New Contact
Storing a Number in the Phone’s Memory
46
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Contacts, press the Select soft key or the OK / key.
3.
Scroll to Add New Contact by pressing the Up or Down key and press the
Select soft key or the OK / key.
4.
Select Phone and press the Select soft key or the OK / key.
5.
Enter the New Contact information. The following entries are available:
䢇 Name (First Name/Last Name): allows you to enter a first name and a last
name for the number entered.
䢇 Mobile: assigns the number entered to the Mobile entry.
䢇 Home: assigns the number entered to the Home entry.
䢇 Office: assigns the number entered to the Office entry.
䢇 Fax: assigns the number entered to the Fax entry.
䢇 Other: allows you to enter additional numbers for the entry.
䢇 Email: allows you to enter an e-mail address for the contact.
䢇 Graphic: allows you to assign a caller ID image to the number you have entered.
Press the OK / key to display graphic menu. Choose from the following options:
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
䢇
Ringtone: allows you to assign a melody to the number contact entry. Press the
OK / key to display ringtone menu. Choose from the following:
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
䢇
䢇
Take a Photo: launches the camera.
Photos: launches the Photos menu to choose from previously
taken photos.
Downloaded Graphics: assign a graphic that you have
previously downloaded.
Favorite Graphics: assign a graphic that you have saved to the
favorite graphics folder.
Default Graphics: assign a default (system delivered) graphic.
None: no graphic assigned to this contact entry.
Default Ringtones: assign a default (system delivered) ringtone.
Downloaded Audio: assign a ringtone that you have previously
downloaded.
Favorite Audio: assign a ringtone that you have saved to the
favorite sounds folder.
Music: launches the Music List to select from music files saved.
None: no sounds are assigned to this contact entry.
Group: allows you to assign an existing or create a new group entry to the
number entered. Press the OK / key to display groups. Press the Option soft key
to Select or Add a new group.
Memo: allows you to enter memos associated with the number entered.
Section 6: Understanding Your Contacts
47
6.
Press the Save soft key or the OK / key to save new contact entry.
Tip: To change text entry mode press the
"Using Alphabet Mode" on page 43.
7.
key. For further details about how to enter characters, see
The View screen appears in the display.
Press the Options soft key to select from the following:
䢇 Edit: allows you to edit the contact information. Press the OK / key to save.
䢇 Send via: allows you to create a text message, multimedia message, or send a
message to a discovered Bluetooth device.
䢇 Delete: allows you to delete the entry you have selected. Press Yes to confirm
delete action, or No to cancel.
9. To return to the Idle screen, press the
key.
8.
Storing a Number in the SIM Card
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Contacts, press the Select soft key or the OK / key.
3.
Scroll to Add New Contact by pressing the Up or Down key and press the
Select soft key or the OK / key.
4.
Select SIM and press the Select soft key or the OK / key. The Add New
Contact screen displays.
5.
Enter the following information below for the New Contact.
Note: To change text entry mode press the
"Using Alphabet Mode" on page 43.
䢇
䢇
䢇
key. For further details about how to enter characters, see
Name: allows you to enter a name for the number entered.
Phone Number: assigns the number entered to the Mobile entry.
Location: allows you to assign a location number on your SIM for the number
being entered.
Note: The Graphic, Ringtone, and Group options can be set at this point, but the information is moved from
the SIM card to the phone.
䢇
䢇
䢇
48
Graphic: allows you to assign a caller ID image to the number you have entered.
Press the OK / key to display graphic menu.
Ringtone: allows you to assign a melody to the number entered. Press the OK /
key to display ringtone menu.
Group: allows you to assign an existing or create a new group entry to the
number entered. Press the OK / key to display groups. Press the Option soft key
to Select or Add a new group.
6.
Press the Save soft key to save your entry.
7.
The View screen appears in the display.
Press the Options soft key to display the following options:
䢇 Edit: allows you to edit the contact information. Press the OK / key to save.
䢇 Send Message: allows you to send a text message or multimedia message to
the contact entry.
䢇 Copy: allows you to copy the number to another location. You can select the
memory location, either SIM or Phone, and the location number.
䢇 Send via: allows you to create a text message, multimedia message, or send a
message to a discovered Bluetooth device.
䢇 Delete: allows you to delete the entry you have selected. Press Yes to confirm
delete action, or No to cancel.
9. To return to the Idle screen, press the
key.
8.
Dialing a Number from the SIM Card
1.
In Idle mode, enter the location number for the phone number you want to
dial and press the
key.
The contact entry information is displayed.
2.
Press the Left or Right navigation key to find other numbers on the list.
3.
Press the Dial soft key, the
key, or the OK / key when you have
selected the number you want to call.
Using Caller Groups
Creating a Group
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Contacts, press the Select soft key or the OK / key.
3.
Scroll to Group by pressing the Up or Down key and press the Select soft
key or the OK / key.
4.
Press the Options soft key, select Add and press Select soft key.
5.
Enter the Name of the new Group, a Caller ID graphic, and a Ringtone.
Press the Save soft key.
Editing a Caller Group
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Contacts, press the Select soft key or the OK / key.
3.
Scroll to Group by pressing the Up or Down key and press the Select soft
key or the OK / key.
4.
Scroll through the group list by pressing the Up or Down navigation key.
Section 6: Understanding Your Contacts
49
5.
When the group you want to edit highlights, press the Options soft key.
The following options are available:
䢇 View: allow you to view all contacts listed under the group.
䢇 Add: allows you to add a new group.
䢇 Edit: allows you to change the name of the group, an Alert, and assign a graphic
ID.
Use the Left or Right navigation keys update text.
Use the Up or Down navigation keys to select the Caller ID and Ringtone
options. Press the OK / key to access the available options.
䢇 Send Message: allows you to create a text or multimedia message for the
selected Contacts entry.
䢇 Delete: allows you to delete the entry you have selected or all. Press Yes to
confirm delete action, or No to cancel.
6. When you are finished, press the
key to return to Idle mode.
Deleting a Caller Group
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Contacts, press the Select soft key or the OK / key.
3.
Scroll to Group by pressing the Up or Down key and press the Select soft
key or the OK / key.
4.
Press the Options soft key, select Delete and press Select soft key or the
OK / key. The Delete sub menu display.
Select from the following options:
䢇 Selected: deletes selected Group.
䢇 All: deletes all Groups listed.
6. Select an option and press the Select soft key.
5.
7.
Press the Yes soft key to confirm deletion.
8.
When you are finished, press the
key to return to Idle mode.
Using Speed Dial
Once you have stored phone numbers from your Contacts list, you can set up to 8speed dial entries and then dial them easily whenever you want, simply by pressing
the associated numeric key.
In Idle mode, to speed dial the numbers assigned to keys (2 to 9), press and hold the
appropriate key.
Setting Up Speed Dial Entries
50
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Contacts, press the Select soft key or the OK / key.
3.
Scroll to Speed Dial by pressing the Up or Down key, press the Select
soft key or the OK / key.
4.
Select the key to which you wish to assign the speed-dialing number, from
the 2 to 9 keys, and press the Options soft key or the OK / key.
Note: Memory location 1 is reserved for your Voice mail server number.
Choose from the following options:
䢇 Add: allows you to add from the Contact List or FDN List.
䢇 View: allows you to see which phone number is assigned to a speed dial number.
䢇 Change: allows you assign a different Contact or phone number to a speed dial
number.
䢇 Remove: allows you to remove a speed dial entry.
6. Select Add from the Speed Dial options menu and press the Select soft
key or press the OK / key.
5.
7.
Select the entry you would like to add and press the Select soft key or the
OK / key.
8.
The entry is saved and the name displays in the Speed Dial memory
location.
Changing a Number Assigned to a Key
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Contacts, press the Select soft key or the OK / key.
3.
Scroll to Speed Dial by pressing the Up or Down key, press the Select
soft key or the OK / key.
4.
Select the memory location you would like to change.
5.
Press the Options soft key, select Change and press the Select soft key
or the OK / key.
6.
Use the navigation keys to select the new speed dial entry to assign and
press the Select soft key or the OK / key.
7.
When you are finished, press the
key to return to Idle mode.
Deleting Speed Dial Entries
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Contacts, press the Select soft key or the OK / key.
3.
Scroll to Speed Dial by pressing the Up or Down Navigation key, press the
Select soft key or the OK / key.
4.
Select the number assigned key you want to remove.
Section 6: Understanding Your Contacts
51
5.
Press the Options soft key or the OK / key, select Remove and press the
Select soft key or the OK / key.
6.
Press the Yes soft key to confirm removal.
7.
When you are finished, press the
key to return to Idle mode.
My Name Card
The Name Card option is your contact information. You can attach your Name Card to
a text, multimedia, or Bluetooth device. To create your name card, use the following
steps:
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Contacts, press the Select soft key or the OK / key.
3.
Scroll to My Name Card by pressing the Up or Down Navigation key,
press the Select soft key or the OK / key.
4.
The My Name Card screen displays. Enter your contact information.
5.
Press the Save soft key or the OK / key.
Press the Options soft key to access the following options:
䢇 Edit: allows you to edit the my name card entry.
䢇 Send Via: allows you to send your name card in a text message, a multimedia
message, or to a Bluetooth device.
䢇 Exchange Name Card: allows you to search for Bluetooth devices and if desired,
to send the My Name Card information.
䢇 Remove: deletes the My Name Card entry.
7. When you are finished, press the
key to return to Idle mode.
6.
Finding My Own Phone Number
This function is a memory aid, which you can use to check your own phone number
if you need to do so.
You can assign a name to each of your own phone numbers registered on your SIM
card. You can also edit the names and numbers. Any changes made here do not in
any affect the actual subscriber numbers on your SIM card.
52
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Contacts, press the Select soft key or the OK / key.
3.
Select Own Number by pressing the Up or Down key and press the
Select soft key or the OK / key.
4.
Highlight Voice Line1, your mobile number displays in a pop up.
5.
Enter additional numbers in the 2, 3, and 4 fields.
6.
Press the OK / key to Save.
Management
Default Saving
The Default Saving option allows you turn on or turn off the auto-save or save
prompt for your Phone and SIM entries. To access this function, use the following
steps:
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Contacts, press the Select soft key or the OK / key.
3.
Select Management by pressing the Up or Down key and press the
Select soft key or the OK / key.
4. Select Default Saving and press the OK / key. Select from the following
options:
䢇 Phone: saves all contact entry information to the phone.
䢇 SIM: saves all contact entry information to the SIM card.
䢇 Ask on Saving: prompts you to save contact information to Phone or SIM.
Copy All to Phone
You can copy all SIM entries to the Phone using the Copy All to Phone option. When
you copy entries to the phone, duplicate entries are created.
Note: Options are available for phone entries that are not available when stored to the SIM card. For details
see "Storing a Number in the Phone’s Memory" on page 46.
Deleting all of the Contacts Entries
You can delete all your entries from your phone’s memory, your SIM card, or both.
1.
When the Idle screen displays, press the Menu soft key. Highlight
Contacts, press the Select soft key or the OK / key.
2.
Scroll to Management by pressing the Up or Down Navigation key and
press the Select soft key or the OK / key.
3.
Highlight Delete All and press the Select soft key or the OK / key.
4.
Highlight the memory location you want to empty and press the OK / key.
You can remove the check mark by pressing the OK / key.
5.
Press the Delete soft key to delete the entries in the selected memory
location.
6.
Enter your phones password and press the OK soft key or the OK / key.
7.
When the confirmation message appears, press the Yes soft key or the
OK / key to confirm deletion.
Press the No soft key to cancel deletion.
Section 6: Understanding Your Contacts
53
8.
When you are finished, press the
key to return to Idle mode.
Checking the Memory Status
You can check how many names and numbers are stored in the Contacts, in both
SIM card and the phone memory. You can also see the capacity of both memories.
54
1.
When the Idle screen displays, press the Menu soft key. Highlight
Contacts, press the Select soft key or the OK / key.
2.
Scroll to Management by pressing the Up or Down Navigation key and
press the Select soft key or the OK / key.
3.
Select Memory Status by pressing the Up or Down Navigation key and
press the Select soft key or the OK / key.
4.
When you are finished viewing your phone’s Memory Status, press the
key to return to Idle mode
Section 7: Messaging
Topics Covered
• Types of Messages
• Using AIM® Messaging Service
• Creating and Sending New Messages
• Retrieving New Messages
• Viewing Messages
• Managing Your Own Message Folders
• Using Message Options
• Using Message Templates
• Deleting Messages
• Settings
• Memory Status
This section describes how to send or receive different types of messages. It also
includes the features and functionality associated with messaging.
Section 7: Messaging
55
Types of Messages
Your phone provides the following message types:
• AIM Messages
• Text Messages
• Multimedia Messages
Using AIM® Messaging Service
AIM messaging service allows you to send and receive instant messages using AIM
communities. Before accessing it on your phone, you must first create a default
community account.
Default Community Settings
To access your default community session settings, use the following steps:
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Messaging, and press the Select soft key or the OK / key.
3.
Highlight AIM, and press the Select soft key or the OK / key.
4.
Highlight Settings and press the Select soft key or the OK / key.
5.
Select Community Settings and press the Select soft key or the OK /
key.
You can select what type of alert (if any) your phone will play for received
messages, buddy contacts, and system messages. You can also set how
often these alerts will repeat.
You can select alphabetical sorting or sorting by status.
6.
Use the Navigation keys to highlight your option, and press the Save soft
key or the OK / key to save your selection(s).
Using AIM
56
1.
When the Idle screen displays, press the Menu soft key.
2.
Highlight Messaging, and press the Select soft key or the OK / key.
3.
Highlight AIM, and press the Select soft key or the OK / key.
4.
Use the on-screen, application-specific functions and options to use the
AIM messaging service.
Creating and Sending New Messages
Text Messages
Short Message Service (SMS) allows you to send and receive short text messages to
and from other mobile phones. In addition, your phone supports the Enhanced
Messaging Service (EMS), which enables you to include simple pictures, melodies,
and animated images in your messages. To use this feature, you must subscribe to
your service provider’s message service.
The Message icon
displays when you have received new text messages. When
the memory is full, an error message displays and you cannot receive any new
messages. Use the Delete option in each message box to delete obsolete messages.
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Messaging and press the Select soft key or the OK / key. Using
the Up or Down Navigation key, highlight Create New Message and press
the Select soft key or the OK / key.
3.
Highlight Text Message and press the Select soft key or the OK / key.
The New screen appears.
4.
Create your message.
5.
When you have finished writing your message, press the Options soft key.
Choose from the following options:
䢇 Send Message: allows you to send the message.
䢇 Insert: allows you to insert
ⳮ
ⳮ
ⳮ
䢇
Add Content: allows you to add pictures, animation, or melody to your message.
ⳮ
ⳮ
ⳮ
䢇
Text Templates: allows you to apply one of the preset message
templates to the text. Select one of the 10 items stored in the Text
messages template menu.
Add Contacts: allows you to select an address from your Contact
List.
Favorites: allows you to enter text from your Favorites folder.
Picture: allows you to add a picture to your message.
Animation: allows you to add an animation to your message.
Select between Emotions or My Animations.
Melody: allows you to add a melody to your message. Select
between Preset Melodies and My Melodies.
Attach: allows you to attach a Name Card, Schedule, Anniversary, Miscellaneous,
or Task.
Section 7: Messaging
57
Save Message to: save the message in the Drafts folder or a folder you have
created in the My Folder option.
䢇 Language Select: allows you to set the language to English, Français, or
Español.
䢇 Text Style: allows you to format the style of the text. For the Text Size attribute,
select Normal, Large, Small. For the Text Mode attribute, select Normal, Underline,
or Strikethrough. The options Bold and Italic are set by using the OK / key to
place a checkmark by them.
䢇 Input Method: allows you select the text input method. For example, ab, Ab, AB,
T9 ab, T9 Ab, T9 AB, Numeric, Symbols)
Select Send Message and press the Select soft key or the OK / key.
Continue to the next step.
Alternatively, select Save Message to to save the message in the Drafts
folder. After saving the message, the display returns to the My Messages
menu list.
䢇
6.
7.
Enter a destination number. If you want to send the message to multiple
destinations, press the Down Navigation key after entering a number and
repeat this step.
When you have finished entering destination numbers, press the Options
soft key. The following options display:
䢇 Send: allows you to send the message.
䢇 Recent Recipient: allows you to view a list of previous recipients destination
numbers.
䢇 Contacts: allows you to add recipients to your Contacts.
䢇 Group: allows you to create and add a new group.
䢇 Save to: save the message in the Drafts folder or a folder you have created in the
My Folder option.
䢇 Delete Destination: allows you to delete the destination number.
9. Select Send and press the Select soft key or the OK / key to send
message.
8.
Note: When you write a text message, the phone automatically splits it into several messages if your
message exceeds the maximum number of characters allowed for sending. The number of split messages
to be sent is shown each time your message is split. Depending on your service provider, the maximum
number of characters may vary.
Multimedia Messages
58
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Messaging and press the Select soft key or the OK / key. Using
the Up or Down Navigation key, highlight Create New Message and press
the Select soft key or the OK / key.
3.
Highlight Multimedia Message and press the Select soft key or the OK /
key.
4.
Using the Up or Down Navigation key, highlight a message content option
and press the OK / key.
Alternatively highlight the message content option, press the Options soft
key. The following options display:
䢇 Subject
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
5.
Add: allows you to enter subject text.
Preview: allows you to preview your messages before sending.
Send: allows you to send the message
Save to: saves the message to Drafts folder or a folder you have
created in the My Folder option.
Settings: allows you to select a Delivery Report, Read Reply,
Priority, Expiry Date, and Delivery Time.
Add Page: allows you to add additional pages to your message.
Delete Page: deletes a page from your message.
Edit Page: allows you to change the page duration (more or less
pages) or to edit the order of the pages.
Attach: allows you to attach a Name Card, a Schedule, an
Anniversary, a Miscellaneous item or Task to your message.
Select Add, press the Select soft key or the OK / key.
Enter the subject text. When you have finished entering the subject, press
the Options soft key. Choose from the following options:
䢇 Save: allows you to save subject.
䢇 Insert: allows you to add a message text from the Templates folder, an entry from
the Contacts, or a URL address in the Favorites folder.
䢇 Save to: save the message in the Drafts folder or a folder you have created in the
My Folder option.
䢇 Language Select: allows you to change the language to be used in input mode.
䢇 Input Method: allows to select text input mode.
7. Using the Up or Down Navigation key, highlight a message content option
and press the OK / key.
6.
Alternatively highlight the message content option, press the Options soft
key. The following options display:
䢇 Graphics & Video
Section 7: Messaging
59
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
䢇
Audio
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
60
Add Graphics: allows you to create a new graphic (launches the
camera), or add photos you have already taken, or add
Downloaded Graphics or graphics saved in your Favorite Graphics
folder, and graphics stored on your memory card.
Add Video: allows you to create a new video (launches the video
camera), or add previously recorded videos, or add Downloaded
Videos or videos saved in your Favorite Videos folder and videos
stored on your memory card.
Preview: allows you to preview the message before sending.
Send: allows you to send the message
Save to: saves the message to Drafts folder or a folder you have
created in the My Folder option.
Settings: allows you to select a Delivery Report, Read Reply,
Priority, Expiry Date, and Delivery Time.
Add Page: allows you to additional pages to your message.
Delete Page: deletes a page from your message.
Edit Page: allows you to change the page duration (more or less
pages) or to edit the order of the pages.
Attach: allows you to attach a Name Card, a Schedule, an
Anniversary, a Miscellaneous item or Task to your message.
Add Audio: allows you to create a new audio (launches the
record audio screen), or add previously recorded audio files, or
add Downloaded Audio files or audio files saved in your Favorite
Audio folder and audio files stored on your memory card..
Preview: allows you to preview the message before sending.
Send: allows you to send the message
Save to: saves the message to Drafts folder or a folder you have
created in the My Folder option.
Settings: allows you to select a Delivery Report, Read Reply,
Priority, Expiry Date, and Delivery Time.
Add Page: allows you to additional pages to your message.
Delete Page: deletes a page from your message.
ⳮ
ⳮ
䢇
Edit Page: allows you to change the page duration (more or less
pages) or to edit the order of the pages.
Attach: allows you to attach a Name Card, a Schedule, an
Anniversary, a Miscellaneous item or Task to your message.
Message
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
Add: allows you to add another page.
Preview: allows you to preview your messages before sending.
Send: allows you to send the message
Save to: saves the message to Drafts folder or a folder you have
created in the My Folder option.
Settings: allows you to select a Delivery Report, Read Reply,
Priority, Expiry Date, and Delivery Time.
Add Page: allows you to additional pages to your message.
Delete Page: deletes a page from your message.
Edit Page: allows you to change the page duration (more or less
pages) or to edit the order of the pages.
Attach: allows you to attach a Name Card, a Schedule, an
Anniversary, a Miscellaneous item or Task to your message.
When you have finished writing the message, press the Options soft key. Choose
from the following options:
䢇 Save: allows you to save the text message you entered.
䢇 Insert: allows you to add a message text from the Templates folder, an entry from
the Contacts, or a URL address in the Favorites folder.
䢇 Save to: save the message in the Drafts folder or a folder you have created in the
My Folder option.
䢇 Language Select: allows you to change the language to be used in input mode.
䢇 Input Method: allows to select text input mode.
8. When you have finished creating the messages, press the Options soft
key and choose Send.
9.
Manually enter a number or press the Options soft key and select
Contacts, and press the Select soft key or the OK / key.
To select a number from your Contacts highlight the recipient and press
the Select soft key or the OK / key.
10. When you have finished entering destination numbers, press the OK / key.
Section 7: Messaging
61
Alternatively, press the Options soft key, select Send and press the Select
soft key.
Retrieving New Messages
While text messages from other phones are delivered directly to your phone,
Multimedia messages will be stored in the Inbox of the message server and the
server will alert you to new messages. Therefore you need to retrieve new messages
to your phone and read them on the phone.
Retrieving an Multimedia Message
When a new Multimedia message comes in, the display shows the Multimedia
Message icon (
) and a text notification along with the sender’s number.
1.
Press the View soft key or the OK / key to view brief information about the
message, such as the sender’s number, the message size, and the
subject.
If you want to view the message later in the Inbox, press the Exit soft key.
Press the Options soft key or the OK / key to access the following
options:
䢇 Reply via: allows you to reply to the message with a text message or with a
multimedia message.
䢇 Reply All via Multimedia Message: allows you to reply to all the recipients in
the message with a multimedia message.
䢇 Call Back: allows you to direct dial the number from which the multimedia
message originated.
䢇 Forward: allows you to forward the message to another person.
䢇 Delete: deletes the message.
䢇 Extract Address: allows you to move the address to the contacts list.
䢇 Save MEdia: saves to the audio and/or video to the My MEdia folder. Audio will
save to audio folder, graphic will save to graphic folder and video will save to video
folder.
䢇 Protection: locks the message to keep it from being deleted or unlocks the
message.
䢇 Properties: shows you detailed information about the message.
3. To scroll through the message, press the Up or Down key.
2.
4.
When you have finished, press the
key.
Viewing Messages
The My Messages screen provides 5 message folders. To access the Message
folders, use the following steps:
1.
62
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Messaging and press the Select soft key or the OK / . Highlight My
Messages and press the Select soft key or the OK / key.
3.
Press the corresponding number to access the message folders.
䢇 Inbox: stores incoming SMS, Multimedia, CB, and WAP message
䢇 Sent: stores the messages your phone successfully have sent.
䢇 Outbox: stores the messages your phone is attempting to send temporarily.
䢇 Drafts: stores the messages you have saved without sending or tried to send.
䢇 My Folders: allows you to create a folder that is used to store messages. You can
create up to 5 message folders to manage your messages.
Viewing a Message
1.
In Idle mode, press the Menu soft key and highlight Messaging. Press the
Select soft key or the OK / key.
2.
Highlight My Messages and press the Select soft key or the OK / key.
3.
Highlight Inbox and press the Select soft key. The message list opens.
The icons on the left of the number indicates the message type
䢇
: indicates an SMS message
䢇
: indicates a Multimedia message
The icons on the left of the message subject indicate the memory location
and the lock status.
From the message list, you can access the following options by pressing
the Options soft key.
䢇 View: opens the currently selected message.
䢇 Call Back: automatically dials the phone number.
䢇 Delete: deletes the currently selected message or all messages in the Inbox.
䢇 Move to My Folders: allows you to move the message to one of the folders you
have defined.
䢇 Sort by: allows you to sort messages by predefined criterion.
䢇 Protection: locks the message to keep it from being deleted or unlocks the
message.
䢇 Properties: shows you detailed information about the message.
4. Select a message on the list. The message content displays.
5.
Press the Up or Down key to scroll through the message screen. For an
Multimedia message, press the Left or Right key to scroll to other pages,
if the message has more than one message.
6.
When you have finished, press the
key.
Section 7: Messaging
63
Managing Your Own Message Folders
You can create up to 5 message folders to store messages separately from the
default message folders.
Creating a Message Folder
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Highlight Messaging and press the Select soft key or the OK / key.
3.
Highlight My Messages and press the Select soft key or the OK / key.
4.
Highlight My Folders and press the Select soft key or the OK / key.
5.
At the “Create Folder?” prompt press the Yes soft key to create or the No
soft key to cancel.
Note: This option only displays when there are no current folders in the My folder menu.
6.
When a folder is created, press the Options soft key and select Add
Folder.
7.
Enter the folder name and press the OK.
8.
When you have finished, press the
key.
Moving a Message to a Message Folder
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Messaging and press the Select soft key or the OK / key.
3.
Highlight My Messages and press the Select soft key or the OK / key.
4.
Select Inbox and press the Select soft key or the OK / key.
5.
Select the message you want to move and press the Options soft key.
6.
Select Move to My Folders and press the Select soft key or the OK / key.
Move to My Folders sub menu displays.
7.
Select one of the folders you have defined and press the Select soft key or
the OK / key. The message is moved to the folder.
8.
When you have finished, press the
key.
Renaming a Message Folder
64
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Messaging and press the Select soft key or the OK / key. Using
the Up or Down Navigation key highlight My Messages and press the
Select soft key or the OK / key.
3.
Select My Folders. The folder list displays.
4.
Scroll to the folder you want to rename and press the Options soft key,
select Rename Folder and press the Select soft key or the OK / key.
5.
Clear the current name and enter a new name.
6.
Press the OK soft key or the OK / key.
7.
When you have finished, press the
key.
Deleting a Message Folder
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Messaging and press the Select soft key or the OK / key. Using
the Up or Down Navigation key highlight My Messages and press the
Select soft key or the OK / key.
3.
Select My Folders. The folder list displays.
4.
Scroll to the folder you want to delete.
5.
Press the Options soft key and select Delete.
6.
Press the Yes soft key or the OK / key to confirm the deletion.
7.
When you have finished, press the
key.
Using Message Options
While viewing the content of a message, press the Options soft key to access the
following options:
Options for SMS Messages
• Reply: allows you to reply to the message via Text message.
• Call Back: automatically dials the number from which the message originated.
• Forward: allows you to forward the message.
• Delete: deletes the message.
• Move to Phone/Move to SIM: If a message is stored in the SIM card, it is saved to
the phone’s memory. If a message is stored in the phone’s memory it is saved to the
SIM card.
• Extract Address: allows you to save the recipient or sender’s number and URL,
Email addresses or phone numbers from the message text.
• Save Media/Attach: allows you to save media items, such as sounds or images,
from the message into your phone’s memory. You can then use the items when
writing a message. Note, their must a media file attached to the message for this
option to be available.
• Protection: allows you to lock the message, keeping it from being deleted. Also, use
to unlock the message.
Section 7: Messaging
65
Options for Multimedia Messages
• Reply via: allows you to reply to the message with a text message or with a
multimedia message.
• Reply All via Multimedia Message: allows you to reply to all the recipients in the
message with a multimedia message.
• Call Back: allows you to direct dial the number from which the multimedia message
originated.
• Forward: allows you to forward the message to another person.
• Delete: deletes the message.
• Extract Address: allows you to move the address to the contacts list.
• Save MEdia: saves to the audio and/or video to the My MEdia folder. Audio will save
to audio folder, graphic will save to graphic folder and video will save to video folder.
• Protection: locks the message to keep it from being deleted or unlocks the
message.
• Properties: shows you detailed information about the message.
Using Message Templates
Your phone has message templates to allow you to retrieve them when creating a
message. You can change the templates as your preferences or send a message
immediately.
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Messaging and press the Select soft key or the OK / key. Highlight
Templates and press the Select soft key or the OK / key.
Highlight a template and press the Options soft key to access the
following options:
䢇 Edit: allows you to change the template.
䢇 Send Message: allows you to send an SMS message using the template.
䢇 Delete: deletes the template.
䢇 Add New: allows you to add a frequently used message to the template list.
4. When you have finished, press the
key.
3.
Deleting Messages
You can delete the messages in each message folder(s) individually or all at one
time. You can also delete all of your messages at one time.
66
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Messaging and press the Select soft key or the OK / key. Using
the Up or Down Navigation key highlight Delete All and press the Select
soft key or the OK / key.
3.
Select the message folder(s) you want to empty.
To delete all of the messages in all folders, select All Messages.
4.
Press the OK / key to mark the files With Protection. Press the Delete
soft key.
5.
Press the Yes soft key to confirm the deletion.
6.
When you have finished, press the
key.
Deleting Individual Messages
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Messaging and press the Select soft key or the OK / key. Using
the Up or Down Navigation key highlight My Messages and press the
Select soft key or the OK / key.
3.
Highlight Inbox and press the Select soft key or the OK / key.
4.
Select an individual message you want to delete and press the Options
soft key, select Delete and press the Select soft key or the OK / key.
5.
Select Selected and press the Select soft key or the OK / key.
6.
Press the Yes soft key or the OK / key to confirm the deletion.
7.
When you have finished, press the
key.
Settings
You can set up various options for using messaging services.
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Messaging and highlight Settings. Press the Select soft key or the
OK / key.
3.
Select the type of messages for which you want to change. Press the
Select soft key or the OK / key.
AIM*
The following options are available when offline:
• Sign On — allows you to enter your registered AIM screen name and password. You
can also elect to save your AIM password in your phone and to sign on
automatically.
• Saved Conversations — allows you to view files containing saved text of AIM
sessions.
• Offline Conversations — allows you to view files containing saved text of offline
AIM sessions.
Section 7: Messaging
67
• Settings — you can select or customize the profile containing the settings for
connecting to the network. Allows you to select alert ringtones and select a
messages sorting method.
• Help — you can review Service Provider help information and AIM usage Help Text
files stored on your phone.
The following options are available when online:
• Buddies — allows you to review and add AIM sign-ons to this list of people you
frequently contact.
• Saved Conversations — allows you to view files containing saved AIM sessions.
• Sign Off — ends your current AIM session and signs you off.
• Settings — Allows you to set the following options:
- Community Settings — Allows you to select alert ringtones and select a
messages sorting method. You can also enable automatic sign-on to AIM.
- Block List or Ignore List — allows you to block messages from users on your
block list. You can add users to, or remove users from, your block list.
• Help — you can review Service Provider help information and AIM usage Help Text
files stored on your phone.
Text Message
The following options are available:
• Send Settings: allows you to set the following options:
– Reply Path (SIM Dependent): allows the recipient of your message to send you
–
–
a reply through your message center, if your network supports this service.
Delivery Report (SIM Dependent): allows you to activate or deactivate the
report function. When this function is activated, the network informs you
whether or not your message has been delivered.
Bearer Selection: allows you to select either GSM or GPRS Preferred,
depending on your network.
• Current Profile: allows you to select an option for sending a text message. Choose
from the following options:
–
–
–
–
Setting 1
Setting 2
Setting 3
Setting 4
• Text Message Profile: allows you to set the options for sending text messages.
Choose from the following options:
–
–
–
–
68
Setting 1
Setting 2
Setting 3
Setting 4
Multimedia Message
The following options are available:
• Send Settings:
– Delivery Report: when this option is enabled, the network informs you whether
–
–
–
or not your message has been delivered.
Read Reply: when this option is enabled, your phone sends a request for a reply
along with your message to the recipient.
Priority: you can select the priority level of your messages.
Expiry Date: you can select the length of time your messages are stored in the
message center after they are sent.
Delivery Time: you can set a time delay before the phone sends your messages.
–
• Retrieve Settings: you can specify the category of messages you want to retrieve.
Allows you to set the following:
–
–
–
–
Anonymous Reject: rejects messages with a category of anonymous.
ADS Allowed: allows messages with a category of advertisement.
Information Allowed: allows messages with the category of information.
Report Allowed: it allows Delivery Report transmission to the person who sent
message.
Auto Download: automatically downloads the message from the server.
–
• Profile: you can select a connection profile to be used for sending and receiving
Multimedia messages.
Push Message
The following options are available:
• Receive: you can select whether the phone receive or reject push-messages from
the WAP server. Choose from Never, Always, or SMS-C Specific.
• Service Center: enter a service center number to receive SMS messages.
Broadcast
The following options are available:
• Receive: allows you to enable or disable the reception of broadcast messages.
• Channel List: allows you to indicate the channels from which you wish to receive
broadcast messages. The following options are available:
–
–
–
–
Save: use to save the channel for future use.
Add Channel: use to enter the ID and title for a new channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an existing channel.
• Language: allows you to select your preferred language in which to display cell
broadcast messages.
Please contact your service provider for further details.
Section 7: Messaging
69
Memory Status
You can check the amount of the memory being used and the memory remaining for
multimedia messages.
The display shows the total space including the used and free space. You can also
view how much space is currently occupied by each message box.
70
Section 8: Changing Your Settings
Topics Covered
• Sound Settings
• Display Settings
• Time & Date Settings
• Phone Settings
• Network Services
• Bluetooth
• Security
• Connection Settings
• Voice Command Settings
• Reset Settings
This section explains the sound and phone settings for your phone. It includes
display settings, security settings, and extra settings associated with your phone.
Section 8: Changing Your Settings
71
Sound Settings
You can customize various sound settings.
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Settings and press the Select soft key or the OK / key.
3.
Select Sound Settings and press the Select soft key or the OK / key.
The following options are available. Use the Down Navigation key to scroll
to and set options:
Incoming Call
This menu allows you to make a selection from the following categories:
• Get Ringtones: allows you to access the internet to shop for a new ringtone.
• Ringtone: allows you to select from the preloaded ringtones.
• Volume: allows you to set the default volume for your ringer to sound when
receiving an incoming call.
• Alert Type: allows you to set the alert default. Choose from Melody, Vibration,
Vibration then Melody, or Vibrate and Melody.
Press the Left or Right Navigation key to make selection
Press the Save soft key or the OK / key to save changes.
Keypad Tone
This menu allows you to select the tone and volume when you press the keypad.
1.
Use the Navigation keys to select from Off, Xylophone, DTMF, Beep, Drum,
Rain Drop, or Voice.
2.
Use the Navigation keys to increase or decrease the Volume.
Message Tone
This menu allows you to select how the phone informs you that a new SMS,MMS, or
Broadcast message has been received.
For each message tone, the following options are available:
• Tone: you can select a message tone.
• Mode: you can select a type of message alert.
– Off: the phone does not use the SMS tone.
– Tone: the phone sounds the selected message tone.
– Vibration: the phone vibrates.
• Repetition: you can select how often the phone informs you of a new message.
– Once: the phone alerts you to a new message just once at the time of its receipt.
72
–
Every 2 Min.: the phone alerts you one time to a new message every 2 minutes
until you open the message.
Press the Left or Right Navigation key to make selection
Press the Save soft key or the OK / key to save changes.
Power On/Off
This menu allows you to select the melody that the phone sounds when it is
switched on and off.
Press the Up or Down Navigation key to make selection
Press the Select soft key or the OK / key to save changes.
To turn off the sound, select Off.
Slide Tone
This menu allows you to select the melody that the phone sounds when the slide is
being opened.
Press the Up or Down Navigation key to make selection
Press the Select soft key or the OK / key to save changes.
To turn off the sound, select Off.
Quiet Mode
This menu item allows you to select what mode your phone will go in when you
press and hold the
key. You can choose Vibration All or Silent All.
When Vibration All is selected your phone will only vibrate.
When Silent All is selected your phone will not make a sound or vibrate.
Press the Up or Down Navigation key to make selection
Press the Select soft key or the OK / key to save changes
Extra Tones
You can customize additional tones for the phone.
1.
To turn a given tone on, press the OK / key. A check mark displays in front
of the option.
2.
To turn a given tone off, press the OK / key. The check mark no longer
displays in front of the option.
The following options are available:
• Error Tone: this menu allows you to choose whether or not the phone sound when
you perform an improper function.
Section 8: Changing Your Settings
73
• Minute Minder: sets whether or not the phone beeps every minute during an
outgoing call to keep you informed of the length of your call.
• Connection Tone: sets whether or not the phone to beep when your call is
connected to the system.
• Alerts on Call: This menu allows you to choose whether or not the phone informs
you when you receive a new message or when the time for an alarm comes during
a call.
Display Settings
In this menu, you can change various settings for the display or backlight.
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Settings and press the Select soft key or the OK / key.
3.
Select Display Settings and press the Select soft key or the OK / key.
The following options are available. Use the Down Navigation key to scroll
to and set options:
Wallpaper
This menu allows you to change the background image for your phone’s display.
Choose from the following menus:
• Get Graphics: allows you access WAP browser to download new graphics.
• Downloaded Graphics: allows you to save the graphics that you have dowloaded
from the WAP browser.
• Photos: allows you to save the photos you have taken with your phone.
• Favorite Graphics: allows you to save the graphics you have saved to the Favorites
folder.
• Default Wallpapers: allows you to use the wallpapers preloaded to your phone.
Info Display
This menu allows you to change the background image or the color of the text to be
displayed in Idle mode. The following options are available:
• Text Mode: allows you to select a text format. Choose Normal, Outline, or Shadow.
Press the Left or Right Navigation keys to make your selection.
• Text Color: allows you to select the color of the text to be displayed on the Idle
screen. Press the Left or Right Navigation keys to make your selection.
• Graphic Logo: allows you to display your service provider’s logo instead of its’
name. Press the Left or Right Navigation keys to make your selection.
䢇
䢇
Off: the service provider’s name displays in the Idle mode.
On: the service provider’s logo stored in your phone displays in Idle mode; if no
logo has been stored, the service provider’s name displays.
Press the Save soft key or the OK / key to save changes.
74
Skin
You can select the color of the menus displayed. You can choose from pattern 1 - 3.
LCD Brightness
You can adjust the display brightness for the Main LCD to see it better in different
lighting conditions.
Press the Left or Right Navigation key or press the Volume keys to adjust the
brightness.
Back Light
In this menu, you can select the length of time for the LCD back light and the LCD
Dim.
• LCD On: Settings available are: 15 seconds, 30 seconds, 1 minute, 3 minutes, and
10 minutes.
• LCD Dim: Settings available are: 15 seconds, 30 seconds, 1 minute, 3 minutes, and
Off.
Dialing Display
In this menu, you can select the dialing font size, color and the background color.
• Font Size: choose from large, medium, or small.
• Font Color: choose from Basic or Rainbow.
• Background Color: use the Left or Right navigation keys to move through the
available colors.
Idle Screen Setting
In this menu, you can use the Left or Right navigation keys to choose the Idle screen
display on the LCD.
Time & Date Settings
This menu allows you to change the current time and date displayed. You can also
find out what time it is in another part of the world.
Note: Before setting the time, you must specify your time zone in the World time menu. See "World Time"
on page 112.
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Settings and press the Select soft key or the OK / key.
3.
Select Time & Date and press the Select soft key or the OK / key.
The following options are available. Use the Down Navigation key to scroll
to and set options:
Section 8: Changing Your Settings
75
䢇
䢇
䢇
䢇
䢇
䢇
䢇
Set Time: allows you to enter the current time using your keypad.
AM/PM: use the Left or Right Navigation key to select AM or PM.
Time Format: allows you to change the time format to 12 hours or 24 hours. Use
the Left or Right Navigation key to select Time Format.
Set Date: allows you to enter the current date using your keypad.
Date Format: allows you to choose the date display format.
Starting Day of Calendar: allows you to set the starting day of your calendar.
Select Start with Sunday or Start with Monday.
Auto Update: allows you to receive time information from your service provider’s
network. Use the Left or Right Navigation key to set Auto UpDate.
ⳮ
ⳮ
ⳮ
4.
Off: you need to manually set the time and date according to the
current time zone using the Set time menu.
On: the phone automatically updates the time and date according
to the current time zone using the network service.
Confirm first: the phone asks for a confirmation before the
update.
Press the Save soft key or the OK / to save your Time & Date settings.
Note: Automatic updates of time and date does not change the time you have set for alarm settings or
calendar memos.
Phone Settings
To customize the settings of your phone use the following steps:
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Settings and press the Select soft key or the OK / key.
3.
Using the Up or Down Navigation key highlight Phone Settings and press
the Select soft key or the OK / key.
The following options are available:
Language
You can select a display language. When the language option is set to Automatic,
the language is automatically selected according to the language of the SIM card
used.
Depending on your country, service provider, or the software version of the phone,
the Automatic option may not display.
76
Greeting Message
This menu allows you to set a greeting to be displayed briefly when the phone is
switched on.
For details about entering characters, see "Section 5: Entering Text" on page 40.
Slide Settings
This menu allows you to update the settings for the slide option for your handset. To
set these options use the following steps:
1.
From the Phone Settings menu, select Slide Settings press the OK /
key.
2.
The Up option allows you to choose from Accept Call or None. Accept
Call will answer an incoming call when the slider is opened. None will not
answer the call.
3.
The Down option allows you to choose from Stop Operation or Continue
Operation. Stop Operation disconnects the call when the slider is closed.
Continue Operation will not disconect the call.
Shortcut
Only in Idle mode, Navigation keys can be used as shortcut keys. They allow you to
access specific menus directly.
To assign a shortcut to a key:
1.
From the Phone Settings menu, select Shortcut.
2.
Using the Navigation key, highlight the Navigation key to be used as a
shortcut key and press the OK / .
3.
Select the menu to be assigned to the key and press the Select soft key or
the OK / key. An icon associated with your selection will display.
Note: To deactivate a shortcut key, press the Options soft key and select Remove or Remove All.
Extra Settings
You can turn the automatic redialing or answering features on or off.
1.
To turn a feature on, press the OK / key. A check mark displays in front of
the option.
2.
To turn a feature off, press the OK / key. The check mark no longer
displays.
3.
Press the Save soft key to save changes.
The following options are available:
Section 8: Changing Your Settings
77
Note: The interval between call attempts varies.
• Auto Redial: when this option is checked, the phone makes up to ten attempts to
redial a phone number after an unsuccessful call.
• Anykey Answer: when this option is checked, you can answer an incoming call by
pressing any key, except the
key or the Reject soft key. To reject the call, press
the
key or the Reject soft key. When this option is unchecked, you must press
the
key or Accept soft key to answer a call.
Network Services
The Network Service Settings allows you to manage the settings associated with
your calls.
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Settings and press the Select soft key or the OK / key.
3.
Select Network Services and press the Select soft key or the OK / key.
The following options are available. Use the Down Navigation key to scroll
to and set options:
Call Forwarding
This network service enables incoming calls to be rerouted to the number that you
specify.
Example: You may wish to forward your business calls to a colleague while you are out of the office.
To set your call forwarding options:
1.
From the Network Services menu, select Call Forwarding.
2.
Select a call forwarding option by pressing the Up or Down key and then
press the Select soft key or the OK / key.
The following options are available:
䢇 Forward Always: all calls are forwarded.
䢇 Busy: calls are forwarded when you are already on another call.
䢇 No Reply: calls are forwarded when you do not answer the phone.
䢇 Unreachable: calls are forwarded when you are not in an area covered by your
service provider or when your phone is switched off.
䢇 Cancel All: all call forwarding options are canceled.
3. Select the call type, Voice Calls or Data Calls, by pressing the Up or
Down key, and then press the Select soft key or the OK / key.
4.
78
Using the Left or Right Navigation key select Activate.
Select Deactivate to turn off call forwarding.
5.
Scroll to Forward To, enter or change the number to be called.
To enter an international code, press the 0 key until the + sign displays.
6.
Press the Select soft key to save changes.
Call Barring (SIM Dependent)
The call barring network service allows you to restrict your calls. This option is SIM
dependent and requires a subscription. For more information, contact your service
provider.
Call Waiting
This network service informs you when someone is trying to reach you during
another call.
You can specify individual call waiting options for voice calls and/or data calls.
To set your call waiting options:
1.
From the Network Services menu screen, select Call Waiting.
2.
Select the call type, Voice or Data, to which the call waiting option is to be
applied by pressing the Up or Down Navigation key and then press the
Select soft key or the OK / key.
The screen informs you whether call waiting is activated or deactivated.
Select Cancel All to cancel all call waiting features.
3.
Using the Up or Down Navigation key you can Activate or Deactivate the
call waiting feature respectively.
4.
Press the Select soft key to apply selection.
Network Selection (SIM Dependent)
The Network Selection feature enables you to automatically or manually select the
network used when roaming outside of your home area.
Note: You can select a network other than your home network only if there is a valid roaming agreement
between the two.
To indicate to automatically or manually select the network to be used when
roaming:
1.
From the Network Services menu screen, select Network Selection.
2.
Press the Up or Down key until the appropriate option highlights, then
press the OK soft key or the OK / key.
Section 8: Changing Your Settings
79
If you select Automatic, you are connected to the first available network
when roaming.
If you select Manual, go to step 3.
3.
Press the Up or Down key until the network you want highlights and then
press the OK soft key or the OK / key.
The phone will scan for that network and you will be connected.
Caller ID
You can prevent your phone number from being displayed on the phone of the
person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Default: the default setting provided by the network is used.
• Hide Number: your number does not display on the other person’s phone.
• Send Number: your number is sent each time you make a call.
Press the Select soft key to apply changes.
Closed User Group (SIM Dependent)
This network service allows incoming and outgoing calls to be restricted to a
selected user group. you can create up to 10 user groups.
For details about how to create and use a closed user group, contact your service
provider.
Example: A company lends SIM cards to its employees and wants to restrict outgoing calls to members of
the same team.
If you select the Closed User Group menu, you can enter the CUG function. You can
now access the following options:
• Index List: lets you list, add, or delete CUG index numbers.
If there is no CUG index stored, you are prompted to add a new index when you
select this option. Once you have added a CUG index, the list of current CUG indexes
appears.
Add a new CUG index as advised by your service provider, or delete a group.
• Outside Access: lets you enable or disable calls to numbers other than those in the
CUG. This feature depends on the nature of your CUG subscription. Please check
with your service provider.
80
• Default Group: you may set a default CUG with your service provider. If you have
done so, you can enable the Default Group option on your phone. When making a
call, you are give the option of using your default CUG, instead of selecting one from
the list.
Bluetooth
Bluetooth is a short-range wireless communications technology capable of
exchanging information over a distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to beam information with
Bluetooth. If the devices are within a range of one another, you can exchange
information between them, even if they are located in different rooms.
The Bluetooth wireless technology settings menu provides the ability to view and
change the device name, show the visibility, and set the security for the device.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth features available. When
the Bluetooth is turned off, you cannot send or receive information via Bluetooth. To
save battery life or in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology headset.
My Devices
This menu provides a list of Bluetooth wireless technology devices discovered by
your handset.
1.
Highlight My Devices and press the Select soft key or the OK / key.
2.
To search for the Bluetooth device(s), highlight Search New Device and
press the Select soft key or the OK / key.
Connecting to a Bluetooth Device
From the Device list,
1.
Highlight the device and press the Select soft key or the OK / key.
2.
Enter the PIN for the device.
If connecting to a Bluetooth wireless device consult your Bluetooth device
user manual for your assigned PIN.
If connecting to another handset, enter the same user-defined PIN on both
handsets.
Note: The first time you try to pair with a handset, you and the owner of the other handset must enter the
same PIN. Once the handsets are paired, you will not need to use the PIN again.
3.
Press the OK soft key or the OK / key.
Section 8: Changing Your Settings
81
4.
If you are unable to pair with the device a popup appears in the display.
Press the Yes soft key to retry.
My Phone’s Visibility
Allows other users to see your accessibility. Select On for other devices to see your
device, or Off for no visibility.
My Phone’s Name
Shows the handset name. You may change this name enter the text and press the
OK / key.
Secure Mode
Secure mode provides the ability to monitor data stored on the handset. If another
person trys to connect to my phone and access my phone's data, using the "Secure
mode", you can decide whether it is allowed. That is, if the Secure mode is set as
On, whenever the other person trys to access my phone's data, the phone will
always ask you to allow him, if the Secure mode is set as Off, he can access my
phone`s data without permission.
Bluetooth Services
Actually, the Bluetooth specification is a protocol that describes how the short-range
wireless technology works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the chance that different devices
will not work together.
Your phone supports the following profile services:
• Headset: enables outgoing and incoming calls.
• Handsfree: the remote carkit enables outgoing and incoming calls.
• Serial Port: the remote bluetooth device acts as a virtual serial port.
• Dial up: the remote bluetooth device enables internet access through a phone
modem.
• File Transfer: the remote bluetooth device enables users to transfer files from their
handset to another.
• Object Push: the remote bluetooth device enables the transfer of personal data to
other devices.
Security
The Security feature enables you to restrict the use of your phone by the others and
to restrict the types of calls.
Various codes and passwords are used to protect the features of your phone.
1.
82
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Settings and press the Select soft key or the OK / key.
3.
Select Security and press the Select soft key or the OK / key.
The following options are available. Use the Down Navigation key to scroll
to and set options:
PIN Check
When the PIN Check feature is enabled, you must enter your PIN each time you
switch on the phone. Consequently, any person who does not have your PIN cannot
use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
• Disable: the phone connects directly to the network when you switch it on.
• Enable: you must enter the PIN each time the phone is switched on.
Change PIN
This feature allows you to change your current PIN, provided that the PIN Check
feature is enabled. You must enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to confirm it by entering it again.
Phone Lock
When the Phone lock feature is enabled, the phone is locked and you must enter the
4- to 8-digit phone password each time the phone is switched on.
The password is preset to “00000000” at the factory. To change the phone
password, see "Change Password" on page 83.
Once the correct password has been entered, you can use the phone until you
switch it off.
The following options are available:
• Disable: you are not asked to enter the phone password when you switch on the
phone.
• Enable: you are required to enter the phone password when you switch on the
phone.
Change Password
The Change Password feature allows you to change your current phone password to
a new one. You must enter the current password before you can specify a new one.
Section 8: Changing Your Settings
83
The password is preset to “00000000” at the factory. Once you have entered a new
password, you are asked to confirm it by entering it again.
Privacy
Using this menu, you can lock your phone and its’ contents. Once you have locked
the contents, you must enter the phone’s password to access the associated menus.
The password is preset to “00000000” at the factory.
SIM Lock
When the SIM Lock feature is enabled, your phone only works with the current SIM.
You must enter the SIM lock code to unlock the SIM so you can use a different SIM
card.
Once you have entered the lock code, you are asked to confirm your password.
Reenter your password and press the OK soft key.
FDN Mode
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict
your outgoing calls to a limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in Phone book. You must enter your
PIN2. The following options are available:
–
–
–
Full length entries or wild cards can be entered in to the FDN list.
A full length number with a specific contact name can be entered into the FDN
list.
Wildcard entries allow a range of numbers to be dialed with a single entry: ex.
555 – All dialed numbers that begin with 555 will be allowed. Numbers that do
not match the conditions in the FDN list will be restricted. Note: Entering an
asterisk (*) is not required for wild card entries.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.
Change PIN2
The Change PIN2 feature allows you to change your current PIN2 to a new one. You
must enter the current PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.
84
Connection Settings
You can customize the profiles containing the settings for connecting your phone to
the network. These settings are used for the WAP browser or Instant Messenger, or
sending MMS messages.
Note: Your phone connects to the network by default. If you change the MMS settings without first checking
with your service provider, the WAP, MMS features may not work properly.
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Settings and highlight Connection Settings. Press the Select soft
key or the OK / key.
3.
Select the profile you want to change.
For each profile, the following options are available:
䢇 Profile Name: enter a name that you wish to assign to the profile.
䢇 Home URL: enter the address of the WAP homepage of your service provider.
䢇 Proxy: place a check in the box to use the proxy server.
䢇 IP Address: enter the IP address of the proxy server.
䢇 Port: enter a port number or use default setting.
䢇 DNS:
ⳮ
ⳮ
䢇
䢇
DNS1: enter the primary DNS (Domain Name System) address.
DNS2: enter the secondary DNS address.
Bearer: select the network bearer type for data transmission, either GPRS or
GSM.
Advanced Settings:
ⳮ
ⳮ
ⳮ
APN: enter the access point name used for the address of the
network.
Login ID: enter the user ID required to connect to the network.
Password: enter the password required to connect to the
network.
Voice Command Settings
Choice Lists
If VoiceSignal is not absolutely confident that it has correctly identified a name or
number, it can display a choice list of up to three possibilities, and prompt you to
confirm the correct one.
You can control when choice lists appear by changing the Choice Lists setting to
Automatic, Always On, or Always Off.
Section 8: Changing Your Settings
85
• Automatic: VoiceSignal displays a choice list when it is not confident it has
identified the correct choice from among multiple alternatives.
• Always On: When there are multiple alternatives, VoiceSignal always displays a
choice list.
• Always Off: VoiceSignal never displays a choice list. Instead, the application picks
the best from among the possible choices.
Sensitivity
In VoiceSignal, "sensitivity" controls the balance between rejecting too much, which
means the phone frequently does not recognize names, numbers, or commands,
and rejecting too little, which means it frequently recognizes something even if
nothing was said.
When VoiceSignal rejects an utterance, it displays a message such as "Please
repeat…" or "No match found." If you frequently experience these messages, you
might be able to get better recognition by adjusting the Sensitivity setting toward
Reject Less.
If you frequently experience false activations (VoiceSignal detects a wrong match),
you might be able to get better performance by adjusting the Sensitivity setting
toward Reject More.
Digit Dialing
Use the Digit Dialing menu to adapt digit dialing to your voice.
• Adapt Digits: Lets you adapt digits, which can improve voice recognition of phone
numbers. Adaptation takes about 60 seconds.
• Reset Digits: Erases any digit adaptation you have done and resets digit recognition
to the factory default. If you have not adapted digits, this option is grayed out.
Sound
You can customize the VoiceSignal user interface by turning playback on or off for
prompts, names, and numbers. You can also change the speed and volume of name
playback.
• Prompts: Turns playback on or off for prompts such as "Please say a command."
• Digits: Turns playback on or off for digits, for example, when confirming a phone
number.
• Names: Turns playback on or off for names.
• Name Settings: Adjusts the speed and volume of name playback.
• Speakerphone: You can set the VoiceSignal sound to the exterior speaker or to the
interior speaker. Choose from Always On or Always Off when voice recognition is
started.
86
About
The About VoiceSignal option provides the software version available on your
handset, the device name, and VoiceSignal website.
Reset Settings
You can easily reset your phone to its default settings. To reset your phone:
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Settings and highlight Reset Settings. Press the Select soft key or
the OK / key.
Choose from the following:
䢇 All
䢇 Phone Settings
䢇 Display Settings
䢇 Sound Settings
4. Press the OK / key to make your selection and press the Reset soft key.
3.
5.
At the Reset Settings? prompt, Press the Yes soft key to reset, or the No
soft key to cancel.
6.
Enter the 4 to 8-digit password and press the OK soft key or the OK / key.
The password is preset to “00000000.” To change this password, see "Change
Password" on page 83.
Section 8: Changing Your Settings
87
Section 9: Multimedia
Topics Covered
• Audio
• Graphics
• Video
• Music
• Games
• Media
• Using the Camera
• Using Record Video
• Starting VoiceSignal
• Applications
• Alarm
• Timer
• Stopwatch
• World Time
• Other Files
• Memory Card
• Memory Status
The topics covered in this section are audio and video, graphics, voice command,
games, calendar, schedule events, set an alarm, and perform simple math
calculations.
Audio
The Audio menu option allows you to download, record new, and save to your
favorite audio folder and memory card. To access the Audio menu option, use the
following steps:
1.
88
In Idle mode, press the Menu
soft key to access Menu mode.
2.
Use the Navigation keys to highlight File Manager and press the Select
soft key or the OK / key. Audio is highlighted, press the Select soft key or
the OK / key.
3.
Highlight the Get Tones menu option to launch the WAP browser and
select a file to download. Follow the on-screen options. The files
downloaded will be stored in the Downloaded Audio folder.
Highlight the Record option and press the Select soft key or the OK / key
to record a personal audio file. Press the Options soft key to select Record
or press the OK / key to begin recording. Press the Stop soft key to stop
the recording. Press the Options soft key to perform the following:
䢇 Play: plays the audio file.
䢇 Record: records another audio file.
䢇 Go to Recorded Audio: launches the recorded audio files
䢇 Send Via: sends the audio using MMS or Bluetooth.
䢇 Delete: deletes the selected audio file.
䢇 Rename: allows you to rename the recorded audio file.
䢇 Protection: allows you to protect the audio file from being deleted.
䢇 Properties: shows the name, date, format, length, size, and protection.
5. Press the Options soft key to highlight Go to Recorded Audio menu and
press the Select soft key or the OK / key.
4.
Press the OK / key to launch an audio file that you have previously
recorded. Press the Options soft key to perform the following:
䢇 Play: plays the audio file.
䢇 Send via: sends the audio using Multimedia Message or Bluetooth.
䢇 Delete: deletes the selected (or all) audio file(s).
䢇 Rename: allows you to rename the recorded audio file.
䢇 Move to: moves the recorded audio file to the Favorite Audio Files folder or the
Memory card.
䢇 Copy to memory card: copies the selected audio file or all audio files to the
memory card.
䢇 Share for Bluetooth: allows the file (selected or all) to be viewed by a paired
bluetooth device.
䢇 Protection: allows you to protect the audio file from being deleted.
䢇 Properties: shows the name, date, format, length, size, and protection.
7. Press the
key to exit.
6.
Memory Card
This option shows the audio files stored on the memory card.
Section 9: Multimedia
89
Graphics
The Graphics menu option allows you to shop graphics using the WAP browser. You
can download new, and save to your favorite photos folder. To access the Graphics
menu option, use the following steps:
1.
In Idle mode, press the Menu
2.
Use the Navigation keys to highlight File Manager and press the Select
soft key or the OK / key.
soft key to access Menu mode.
3.
Use the Navigation keys to highlight Graphics and press the Select soft
key or the OK / key.
4.
Highlight the Get Graphics menu option to launch the WAP browser and
select a file to download. Press the Select soft key or the OK / key.Follow
the on-screen options. The files downloaded will be stored in the
Downloaded Graphics folder.
5.
Highlight Photos and press the Select soft key or the OK / key to launch
the photos you have previously taken. Press the Options soft key to
choose from the following:
䢇 View: allows you to view the selected photo.
䢇 Send via: allows you to send the photo via Multimedia Message or Bluetooth.
䢇 Set as: allows you to set the selected photo as a Wallpaper or Caller ID.
䢇 Delete: allows you to delete the selected or all photos.
䢇 Rename: allows you to rename the photo.
䢇 Move to: allows you to move the selected graphic to the Favorite folder or the
Memory card.
䢇 Copy to memory card: copies the selected graphic file or all graphic files to the
memory card.
䢇 Slide Show: shows the photos in a slide show. Choose 1 second, or 3 seconds.
䢇 Share for Bluetooth: allows you to set the selected file(s), share, or release all
files for other bluetooth devices.
䢇 Protection: allows you to protect the photo from being deleted.
䢇 Properties: shows the name, date, format, size, resolution, quality, and
protection.
Video
The Video menu option allows you to view video files. To access the Video menu
option, use the following steps:
90
1.
In Idle mode, press the Menu
2.
Use the Navigation keys to highlight File Manager and press the Select
soft key or the OK / key. Highlight Video and press the Select soft key or
the OK / key.
soft key to access Menu mode.
3.
Highlight Downloaded Video and press the Select soft key or the OK /
key. Downloaded files will be stored in the Downloaded Video folder.
4.
Highlight Video Clips and press the Select soft key or the OK / key to
launch the video you have previously taken. Press the Options soft key to
choose from the following:
䢇 Play: allows you to play the selected video.
䢇 Send via: allows you to send the video via Multimedia Message or Bluetooth.
䢇 Delete: allows you to delete the selected or all video.
䢇 Rename: allows you to rename the video.
䢇 Move to: allows you to move the selected video to the Favorite folder or the
Memory card.
䢇 Copy to memory card: copies the selected video or all videos to the memory
card.
䢇 Share for Bluetooth: allows you to set the selected file(s), share, or release all
files for other bluetooth devices.
䢇 Protection: allows you to protect the video from being deleted.
䢇 Properties: shows the name, date, format, size, resolution, and protection.
Music
The Music menu option allows you to access My Music and the music files stored
on the Memory Card. To access the Music menu option, use the following steps:
1.
In Idle mode, press the Menu
2.
Use the Navigation keys to highlight File Manager and press the Select
soft key or the OK / key.
soft key to access Menu mode.
3.
Highlight Music and press the Select soft key or the OK / key.
4.
Choose from the following:
䢇 My Music: launches the Music List. Highlight a file and press OK / key.
䢇 Memory Card: launches the memory card list. Highligt a file and press the OK /
key.
Games
The Games menu option allows you to get games using the WAP browser. You can
download a new game, and save it to the My Games folder. To access the Games
menu option, use the following steps:
1.
In Idle mode, press the Menu
2.
Use the Navigation keys to highlight Games and press the Select soft key
or the OK / key. Then you can enter into the Games menu.
soft key to access Menu mode.
3.
To download new games, select the Get Games menu.
Section 9: Multimedia
91
4.
To enjoy pre-loaded games, enter into My Games menu then choose one
game.
Media
In the Media menu you can access the Camera, MP3 Player, Voice Command, and
Record Audio.
MP3 Player
Note: Optional Accessories required. Contact your Wireless Provider for more details or visit
www.samsungmobile.com.
Note: Samsung PC Studio software (optional accessory) and the d806 only recognize MP3, AAC, and AAC+,
formats. If you want to play music from the CD or other source, you will first have to convert it to one of
these formats via the media player of your choice.
The MP3 Player menu option allows you to play the music files saved to your Audio
file or Memory card. Use the following procedures to access the MP3 Player.
1.
In Idle mode, press the Menu
2.
Use the Navigation keys to highlight Media and press the Select soft key
or the OK / key.
3.
Highlight MP3 Player. Press the Select soft key or the OK / key.
4.
Press the Options soft key. The following options are displayed:
䢇 Add Music From: allows you to add the music files from the Phone or Memory
Card.
䢇 Settings: allows you to change these settings:
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
5.
soft key to access Menu mode.
Repeat Mode: choose from Off, Repeat One, Repeat All.
Shuffle: choose from Off or On.
Visualization: choose from Type 1 or Type 2.
Backlight: choose from Always On or Normal.
Volume: choose the volume for the music file to be played.
Press the OK / key to play the music file.
Note: The MP3 Player can only play MP3 files recorded at 192 kbps or less. You can set an MP3 file with a
maximum size of 600 kbytes as your Ringtone, Caller Ringtone (ID), or Alarm Tone.
Using the Camera
Use the following steps to take photos and select settings.
92
Taking Photos
Note: When taking a photo in direct sunlight or in bright conditions, shadows may appear on the photo.
1.
In Idle mode, press the Menu
soft key to access Menu mode.
Use the Navigation keys to highlight Media and press the Select soft key
or the OK / key. Camera is highlighted. Press the Select soft key or the
OK / key.
Alternatively, in Idle mode, press the Camera soft key to turn on the
camera.
Adjust the image by aiming the camera at the subject.
2.
Press the OK / key to take the photo.
Note: Your camera produces photos in JPEG format.
Camera Options
䢇 Record Video: allows you to switch from camera mode to video mode.
䢇 Shooting Mode: allows you to take a photo in various modes. Once you change
the mode, the corresponding indicator appears at the top right of the display.
ⳮ
ⳮ
ⳮ
䢇
Single Shot: allows you to take a photo in normal mode. you can
take and save or automatically save to keep the preview open.
Multi Shot: allows you to take a series of action stills. Select the
number of photos the camera will take. Choose 6 shots (Normal
or High), 9 shots (Normal or High), or 15 shots (Normal or High).
Mosaic Shot: allows you to take 4 or 9 photos (manually or
automatically), and store them as one JPEG file.
Effects: allows you to choose a custom color tone for your photo. Choose from
the following Effects Mode.
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
None: automatically adjust the picture for the best quality
available.
Gray Scale: removes all color and display the picture as black
and white.
Negative: changes the image to a negative image display.
Sepia: adds a sepia tint to the picture. This is the common
orange tint that was popular in early photography.
Emboss: changes to reflect raised images.
Section 9: Multimedia
93
ⳮ
ⳮ
ⳮ
䢇
䢇
Frames: allows you to select a decorative frame overlay.
Timer: allows you to set a time delay before the camera takes the photo.
ⳮ
ⳮ
ⳮ
ⳮ
䢇
䢇
Sketch: changes the image to appear like a sketch drawing.
Antique: changes the image to a yellow effect.
Moonlight: decrease black tint.
Off
3 sec.
5 sec.
10 sec.
Go to Photos: allows you to go directly to your Photo folder. The Photo folder
contains the photos taken with your handset.
Settings: allows you to customize your camera settings. Choose the following
options:
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
Size: allows you to set the image size. The icon for the selected
image size appears on the capture screen
Quality: allows you to select the picture quality setting.
Viewfinder: allows you to choose between Standard Ratio, and
Full screen view.
Shutter Sound: allows you to select a tone or turn off the sound
when taking a photo.
Zoom Sound: allow you to turn on or off the zoom sound.
Brightness Sound: allow you to turn on or off the sound when
the brightness is adjusted.
3.
Press the Back soft key to return to the picture viewer.
4.
You can use the keypad to quickly change the camera options using the
camera shortcut keys.
Camera Shortcuts
Shortcut keys, allows you to change options using your keypad, Navigation keys,
and Volume key in capture mode. The following options are available.
OK /
OK /
OK /
94
takes photo.
adjust the image brightness.
zooms in or out.
flips the image vertically.
flips the image horizontally.
changes from video to camera, and from camera to video.
changes the image size.
changes the photo quality.
changes the camera shot mode.
changes the color tone of the photo (only in Normal mode)
selects a decorative frame (only in Normal mode).
sets a time delay (3, 5, or 10 seconds).
switches to the Photos Albums.
switches to full screen/standard screen.
Camera Options after a Photo is Taken
After you have taken a photo, you can use various options by pressing the Options
soft key. Highlight an option and press the Select soft key or the OK / key. The
following options are available:
• Take Another: launches the camera option and allows you to take another photo.
• Send via: allows you to send your photo as part of a Multimedia message or
Bluetooth.
• Set as: allows you to set the photo as your wallpaper or caller ID image for a
Contacts entry.
• Delete: deletes the photo.
• Rename: allows you to change the name of the photo.
• Go to Photos: allows you to go directly to your Photo folder. The Photo folder
contains the photos taken with your handset.
• Share for Bluetooth: allows you to choose a selected file or all files to share using
the Bluetooth mobile device.
• Protection: allows you to protect the photo from being deleted.
Section 9: Multimedia
95
• Properties: shows the properties of the photo such as Name, Time, Format, Size,
Resolution, Quality, and Protection.
Accessing the Photos Folder
1.
In Idle mode, press the Menu
2.
Use the Navigation keys to highlight File Manager and press the Select
soft key or the OK / key.
soft key to access Menu mode.
3.
Highlight Graphics and press the Select soft key or the OK / key.
4.
Use the Up or Down Navigation key to select the Photos folder press the
Select soft key or the OK / key.
Highlight a photo and press the Options soft key:
䢇 View: allows you to view the selected photo in full screen mode.
䢇 Send via: allows you to send the photo as part of a Multimedia message, or
Bluetooth.
䢇 Set as: allows you to set the photo as your wallpaper or caller ID image for a
Contacts entry.
䢇 Delete: allows you to delete the highlighted photo or all photos in the folder.
䢇 Rename: allows you to change the name of the photo.
䢇 Move to: allows you to move the highlighted photo to the Favorite Graphics folder
or the Memory card.
䢇 Copy to memory card: copies the selected photo or all photos to the memory
card.
䢇 Slide Show: allows you to assign pictures to be viewed in a slideshow. Choose
from Normal or High Speed.
䢇 Share for Bluetooth: allows you to choose a selected file or all files to share
using the Bluetooth mobile device.
䢇 Protection: allows you to protect the photo from being deleted.
䢇 Properties: shows the properties of the photo such as Name, Date, Format, Size,
Resolution, Quality, and Protection.
6. To view the photos in thumbnail preview, press the OK / key or press the
Options soft key, highlight View and press the Select soft key or the OK /
key. Press the Back soft key to return to thumbnail preview.
5.
7.
96
Press the Options soft key to display the Full Screen view options:
䢇 List: displays the photos in a list format.
䢇 Send Via: allows you to send the photo as part of a Multimedia message or
Bluetooth.
䢇 Set as: allows you to set the photo as your wallpaper or caller ID image for a
Contacts entry.
䢇 Delete: allows you to delete the photo.
䢇 Rename: allows you to rename the photo.
䢇
䢇
䢇
䢇
䢇
䢇
Move to: allows you to move the highlighted photo to Favorite Folder or the
Memory Card.
Copy to memory card: copies the selected photo or all photos to the memory
card.
Slide Show: allows you to assign pictures to be viewed in a slideshow. Choose
from Normal or High Speed.
Share for Bluetooth: allows the Selected or All photos to be shared using
Bluetooth.
Protection: allows you to protect the photo from being deleted.
Properties: shows the properties of the photo such as Name, Date, Format, Size,
Resolution, Quality, and Protection.
Using Record Video
1.
In Idle mode, press the Menu
soft key to access Menu mode.
Use the Navigation keys to highlight Media and press the Select soft key
or the OK / key. Camera is highlighted. press the Select soft key or the
OK / key.
Alternatively, in Idle mode, press the Camera soft key to turn on the
camera.
Adjust the image by aiming the camera at the subject.
2.
Press the
3.
Adjust the image by aiming the camera at the subject. Press the OK / key
to start recording.
key to switch to Video.
4.
When you have finished your recording, press the OK / key to stop
recording. The recording is automatically saved.
5.
Press the Options soft key to use various video options after the recording
is complete. See "Video Options after a Video is Taken" on page 99 for
more information.
Using the Video Options
In Record mode, you can use various options for the camera by pressing the Options
soft key. Highlight an option and press the Select soft key or the OK / key. The
following options are available:
• Take Photo: allows you to switch from video mode to camera mode.
• Effects: allows you to choose a custom color tone for your video. Choose from the
following Effects Mode.
–
–
–
None: automatically adjust the picture for the best quality available.
Gray Scale: removes all color and display the picture as black and white.
Negative: changes the image to a negative image display.
Section 9: Multimedia
97
–
–
–
–
–
Sepia: adds a sepia tint to the picture. This is the common orange tint that was
popular in early photography.
Emboss: changes to reflect raised images.
Sketch: changes the image to appear like a sketch drawing.
Antique: changes the image to a yellow effect.
Moonlight: decrease black tint.
• Timer: allows you to set a time delay before the camera takes the video.
– Off
– 3 sec.
– 5 sec.
– 10 sec.
• Go to Video: allows you to go directly to your Video Clips folder. The Video Clips
folder contains the Videos taken with your handset.
• Settings: allows you to customize your video settings. Choose the following options:
– Recording Mode : allows you to choose Limit for Message(290K) or
–
–
–
–
–
Normal(1M).
Size: allows you to set the video size. The icon for the selected video size
appears on the capture screen.
Viewfinder : allows you to choose between Standard Ratio, and Full screen
view.
Audio Record: allows you to set audio on/off.
Zoom Sound: allows you to turn on or off the zoom sound.
Brightness Sound: allows you to turn on or off the sound when the brightness is
adjusted.
• Video Shortcuts: allows you to change options using your keypad, Navigation keys,
and Volume key in record mode. The following options are available.
OK /
OK /
OK /
records video.
adjust the image brightness.
zooms in or out.
flips the image vertically.
flips the image horizontally.
changes from video to camera, and from camera to video.
changes the video size.
changes the recording mode.
98
changes the color tone of the video.
mutes the audio during a recording.
sets a time delay (3, 5, or 10 seconds).
switches to the Video Albums.
changes to full screen/standard screen display.
Video Options after a Video is Taken
After you have finished recording or manually saved a video clip, you can use various
options by pressing the Options soft key. Highlight an option and press the Select
soft key or the OK / key. The following options are available:
• Record Another: launches the camera option and allows you to take another video.
• Send via: allows you to send your video as part of a Multimedia message or
Bluetooth.
• Delete: deletes the video.
• Rename: allows you to change the name of the video.
• Go to Video: allows you to go directly to your Video folder. The Video folder contains
the videos taken with your handset.
• Share for Bluetooth: allows you to choose a selected file or all files to share using
the Bluetooth mobile device.
• Protection: allows you to protect the video from being deleted.
• Properties: shows the properties of the video such as name, time, format, size,
resolution, and protection.
Accessing the Videos Folder
1.
In Idle mode, press the Menu
2.
Use the Navigation keys to highlight File Manager and press the Select
soft key or the OK / key.
soft key to access Menu mode.
3.
Use the Up or Down Navigation key to highlight Video and press the
Select soft key or the OK / key.
4.
Use the Up or Down Navigation key to select the Video Clips folder.
5.
Use the Up or Down Navigation key to scroll through the videos.
6.
Highlight a video and press the Options soft key:
䢇 Play: allows you to play the video.
䢇 Send via: allows you to send your video as part of a Multimedia message or
Bluetooth.
Section 9: Multimedia
99
Delete: allows you to delete the highlighted video or all videos in you the videos
folder.
䢇 Rename: allows you to change the name of the recorded video.
䢇 Move to: allows you to move the highlighted video to the Favorites folder or the
Memory card.
䢇 Copy to memory card: copies all or selected videos to the memory card.
䢇 Share for Bluetooth: allows you to choose a selected file or all files to share
using the Bluetooth mobile device.
䢇 Protection: allows you to protect the video from being deleted. Select on or off to
unlock the video.
䢇 Properties: shows the properties of the video such as name, date, format, size,
resolution, and protection.
To view videos, press the OK / key or press the Options soft key, highlight
Play and press the Select soft key or the OK / key. The video will play
automatically.
䢇
7.
Starting VoiceSignal
1.
To start VoiceSignal, in Idle mode, press the Menu
Menu mode.
soft key to access
2.
Use the Navigation keys to highlight the Media menu and press the
Select soft key or the OK / key.
3.
Highlight Voice Command. Press the Select soft key or the OK / key.
VoiceSignal prompts you to "Say a command" and displays the available commands
at the bottom of the screen.
Note: When you first start VoiceSignal, it voice-activates the names stored in your contact list. While reading
your contacts, VoiceSignal displays the following message: Please wait while VoiceSignal voice-activates
your contacts.
100
You can change VoiceSignal settings by starting VoiceSignal and then selecting the
Settings soft key.
Calling a Name or Number
Use the Call command to place a call. If the number you want to call is stored in your
contact list, you can say the contact name and, optionally, which number (Mobile,
Home, Office, Other) you want to call. If the number is not in your contact list, you
can say the number itself.
To Call A Name Or Number
1.
Start VoiceSignal.
You hear "Say a command."
2.
Say "Call" followed by the name of a person in your contact list, and
optionally, the number location (home, office, mobile, etc.) to call, or…
䢇 Say "Call" followed by a valid telephone number, or…
䢇 Say "Call" by itself to be prompted for a name or number.
Examples:
Call Angela Martinez
Call Tom Stewart at Work
䢇 Call Donna Harper's Mobile
䢇 Call 781-555-5200
After you say a name or number, you might be prompted "Did you say
Call?" followed by the first of up to three names or numbers.
䢇
䢇
3.
4.
To confirm a name or number, wait for the beep and then say "Yes."
5.
You can also choose the correct name or number from the choice list by
pressing the number next to the preferred choice, or by selecting it using
the phone's navigation keys. For information on turning off choice lists, or
customizing their behavior, see "Choice Lists" on page 85.
Section 9: Multimedia 101
6.
If the phone recognizes a name that has more than one stored number, it
might prompt you "Did you say call ?" Say the label for the number you
want, for example "Office," "Home," "Mobile," or “Other”.
Hints for Using Call
• Wait for the beep before saying the command.
• When saying a name, speak clearly and say the name of a person in your contact
list, first name followed by last name.
• When saying a telephone number, pronounce each digit clearly and distinctly but do
not pause between the digits. VoiceSignal recognizes the digits one, two, three,
four, five, six, seven, eight, nine, zero, and "oh." It does not recognize expressions
such as "one eight hundred." Instead, say "one eight zero zero."
• If VoiceSignal doesn't recognize numbers correctly, try adapting digit dialing to your
voice. To adapt digit dialing, choose Digit Dialing 'Adapt Digits from the VoiceSignal
Settings menu.
Sending a Message
Use the Send Text command to send a text message to a specified name in your
contact list or a specified number.
To Send A Message
1.
Start VoiceSignal.
You hear "Say a command."
2.
Say "Send Text" or…
Say "Send Text" followed by a name or number
You can say…
䢇
䢇
䢇
䢇
102
Send Text (To be prompted to say the name or number)
Send Text to Kevin Harper
Send Text Angela Martinez at home
Send Text to 781-555-5200
3.
If you did not specify a name or number, VoiceSignal prompts you "Say
the name or number." Say a name in your contact list, or say a valid
telephone number.
4.
After you say a name or number, you might be prompted,
"Did you say?" To confirm a name or number, wait for the beep
and then say "Yes."
You can also choose the correct name or number from the choice list
using the phone's navigation keys.
Hints for using Send Text
• Wait for the beep before saying the command.
• When saying a name, speak clearly and say the name of a person in your contact
list, first name followed by last name.
• If you say a name for which there are multiple phone numbers stored, by default
VoiceSignal assumes you want to send the message to the mobile phone number. If
you want to send a message to a different number (home, work, etc.) you can say
the label. For example, you can say "Send Text Chris Wells at Home."
Looking Up a Contact
Use the Lookup command to look up contact information for any person stored in
your contact list.
To Look Up Contact Information
1.
Start VoiceSignal.
You hear "Say a command."
2.
Say "Lookup" followed by the name of a person in your contact list.
Examples:
Lookup Angela Martinez
Lookup Tom Stewart
After you say a name, you might be prompted "Did you say Lookup?"
followed by the first of up to three names. To confirm a name, wait for the
beep and then say "Yes." You can also choose the correct item from the
choice list using the phone's navigation keys.
䢇
䢇
3.
Hints for using Lookup
• Wait for the beep before saying the command.
• When saying a name, speak clearly and say the name of a person in your contact
list, first name followed by last name.
Opening an Application
Use the "Go To" command to open an application or access a menu on your phone.
Section 9: Multimedia 103
To Open An Application Or Access A Menu
1.
Start VoiceSignal.
You hear "Say a command."
2.
Say "Go To" or…
Say "Go To" followed by the application you want to open or…
Say "Go To" followed by a menu item.
Examples:
Go To (To see a list of applications you can open)
Go To Calendar
Hints for using Go To
䢇
䢇
Wait for the beep before saying the command.
䢇 To see a list of applications/menu items you can open, say "Go To" but do not
specify a destination. VoiceSignal displays a list of valid destinations and prompts
you with "Please Choose." You can then say the name of the application you want
to open.
䢇 If the list is too long to fit on one screen, the screen will contain the choice "Next
Menu." You can say one of the application or menu names on the list, or say "Next
Menu" to view the next screen
Applications
In the Applications menu you can access the Alarm, Calendar, Task, Note, and Tools
(Calculator, Converter, Timer, Stopwatch, and World Time).
Alarm
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring the alarm even if the phone is
switched off.
To set the alarm:
104
1.
In Idle mode, press the Menu
2.
Select Applications and press the Select soft key or the OK / key.
soft key to access the menu mode.
3.
Highlight Alarm and press the Select soft key or the OK / key. The
following options display:
䢇 Wake-up Call: the alarm rings to wake you up at the specified time.
䢇 Alarm 1: primary alarm setting.
䢇 Alarm 2: secondary alarm setting.
䢇 Auto Power: the alarm rings even when the phone is turned off.
4.
Select an alarm type and press the Select soft key or the OK / key. Set
the following options:
䢇 Alarm: use the Left or Right Navigation key to turn alarm on or off.
Note: Your phone is preset to a 12-hour format. To change the time format, see "Time & Date Settings" on
page 75.
Alarm Time: use the alphanumeric keypad enter a time for the alarm to sound.
AM/PM: use the Left or Right Navigation key to select AM or PM.
䢇 Repeat: use the Left or Right Navigation key to select alarm frequency.
䢇 Alarm Tone: press the OK / key, select Downloads, Favorites, My Music, or
Defaults alarm tones. Press the Select soft key or the OK / key to select a tone.
Press the Save soft key to save changes.
䢇
䢇
5.
Note: To stop the alarm when it rings, open the phone and press any key.
Note: Press Confirm
to turn off the alarm, press Snooze
to silence the phone for 5 minutes.
Setting Auto Power Alarms
You can set the phone to ring the alarm when the time for an alarm comes, if the
phone is switched off.
1.
In Idle mode, press the Menu
2.
Select Applications and press the Select soft key or the OK / key.
soft key to access menu mode.
3.
Highlight Alarm and press the Select soft key or the OK / key.
4.
Select Auto Power and press the Select soft key or the OK / key.
5.
Using the Up or Down Navigation key, highlight On and press the Select
soft key or the OK / key to activate the Autopower feature.
If the menu option is set to Off, and the phone is switched off at the
specified time, the alarm does not ring.
6.
When you have finished, press the
key.
Deactivating an Alarm
1.
In Idle mode, press the Menu
2.
Select Applications and press the Select soft key or the OK / key.
soft key to access menu mode.
3.
Highlight Alarm and press the Select soft key or the OK / key.
4.
Select alarm type and press the Select soft key or the OK / key.
5.
On is highlighted, use the Left or Right Navigation key to turn alarm Off.
Section 9: Multimedia 105
6.
Press the Save soft key to save changes.
7.
When you have finished, press the
key.
Calendar
The calendar feature allows you to view the Month, Week, and Day layout views. You
can also create Schedule, Anniversary, and Miscellaneous entries. It also shows any
Missed Alarm Events that have occurred. To access the Calender menu, use the
following steps:
1.
In Idle mode, press the Menu
2.
Select Applications and press the Select soft key or the OK / key.
3.
Highlight Calendar and press the Select soft key or the OK / key.
4.
The following options display. Highlight the entry and press the Select soft
key or the OK / key.
䢇 Month View: displays the calendar in full month view. Monday-Sunday/1-30(31
respectively).
Use the navigation keys to move through the dates on the calendar.
Press the Options soft key to change the view mode, create a new schedule,
anniversary, or miscellaneous item, go to today or another date, or to delete items.
䢇 Week View: displays the calendar in week view. Monday-Sunday.
Use the Left and Right navigation keys to move to the different days of the week
and the Up and Down keys to move to the different hours.
Press the Options soft key to change the view mode, create a new schedule,
anniversary, or miscellaneous item, go to today or another date, or to delete items.
䢇 Day View: displays the current day of the calendar.
Use the Left and Right navigation keys to move to the different days of the week
and the Up and Down keys to move to the different items (if any).
Press the Options soft key to change the view mode; create a new schedule,
anniversary, or miscellaneous item; send to another phone or device; change the
current view mode; or to delete items.
䢇 Schedule: Press the Options soft key and select Create. Press the Select soft key
or the OK / key an empty schedule screen displays. Enter the following
information:
ⳮ
ⳮ
ⳮ
106
soft key to access menu mode.
Subject: enter the Subject text and press the Down Navigation
key.
Details: enter the Details of your message and press the Down
Navigation key
Start Date: enter the Start Date using the keypad and press the
Down Navigation key.
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
䢇
Start Time: enter the Start Time using the keypad and press the
Down Navigation key.
AM/PM: use the Left or Right Navigation key to select AM or PM
for the start time of the scheduled event and press the Down
Navigation key.
End Date: enter the End Date using the keypad and press the
Down Navigation key.
End Time: enter the End Time using the keypad and press the
Down Navigation key.
AM/PM: use the Left or Right Navigation key to select AM or PM
for the end time of the scheduled event and press the Down
Navigation key.
Location: enter the physical location of the scheduled event.
Press the
key to change text entry mode. Press the Down
Navigation key.
Alarm: press the OK / key to set an alarm to ring on the chosen
day. A check mark displays. Press the Down Navigation key.
Before: enter the number of Minutes, Hours, Days or Weeks that
you would like to be notified prior to the scheduled event. Press
the Down Navigation key. Use the Left or Right Navigation key to
select how you will be notified. Press the Down Navigation key.
Alarm Tone: press the OK / key to select an Alarm Tone to ring,
to remind you of the scheduled event and press the Down
Navigation key.
Repeat: press the OK / key to enable this to be repeated Every
Day, Every Week, or Every Month.
Until: enter the date in which you wish this schedule to stop
repeating.
Anniversary: Press the Options soft key and select Create. Press the Select soft
key or the OK / key an empty schedule screen displays. Enter the following
information:
ⳮ
Occasion: enter the detail of the Occasion and press the Down
Navigation key.
Section 9: Multimedia 107
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
䢇
Miscellaneous: You can make up to 100 miscellaneous events for the calendar.
More than one memo can be made for one day. Press the Options soft key and
select Create. Press the Select soft key or the OK / key an empty schedule
screen displays. Enter the following information:
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
108
Date: enter the Date using the keypad and press the Down
Navigation key.
Alarm: press the OK / key to set an alarm to ring on the chosen
day. A check mark displays and press the Down Navigation key.
Before: enter the number of Days or Weeks that you would like to
be notified prior to the scheduled event. Press the Down
Navigation key. Use the Left or Right Navigation key to select how
you will be notified. Press the Down Navigation key. Choose
between Day or Week increment.
Alarm Time: set the alarm time for the scheduled event, using
the keypad and press the Down Navigation key.
AM/PM: use the Left or Right Navigation key to select AM or PM
for the Alarm Time of the scheduled event and press the Down
Navigation key.
Alarm Tone: press the OK / key to select an Alarm Tone to ring,
to remind you of the scheduled event and press the Down
Navigation key.
Repeat Every Year: press the OK / key if you would like the
occasion to be a recurring event. A check mark displays.
Subject: enter the subject information and press the Down
Navigation key.
Details: enter the details associated with this event.
Start Date: enter the Start Date using the keypad and press the
Down Navigation key.
Start Time: enter the Start Time using the keypad and press the
Down Navigation key.
AM/PM: use the Left or Right Navigation key to select AM or PM
for the start time of the scheduled event and press the Down
Navigation key.
ⳮ
ⳮ
ⳮ
䢇
End Date: enter the End Date using the keypad and press the
Down Navigation key.
End Time: enter the End Time using the keypad and press the
Down Navigation key.
AM/PM: use the Left or Right Navigation key to select AM or PM
for the end time of the scheduled event and press the Down
Navigation key.
Missed Alarm Events: This menu displays the events that had an alarm set that
have been missed.
When you have finished, press the Save soft key.
Task
1.
In Idle mode, press the Menu
2.
Select Applications and press the Select soft key or the OK / key.
soft key to access menu mode.
3.
Highlight Task and press the Select soft key or the OK / key.
Press the Options soft key and select Create. Press the Select soft key or
the OK / key an empty task screen displays. Enter the following
information:
䢇 Task: enter details about the event and press the Down Navigation key.
䢇 Start Date: enter the Start Date of the event using the keypad. Press the Down
Navigation key.
䢇 End Date: enter the date the task is expected to be complete.
䢇 Priority: use the Left or Right Navigation key to set a priority level. Choose either
High, Normal, or Low.
5. When you have finished, press the Save soft key.
4.
Note
1.
In Idle mode, press the Menu soft key to access menu mode.
2.
Select Applications and press the Select soft key or the OK / key.
3.
Highlight Note and press the Select soft key or the OK / key.
4.
Press the Options soft key and select Create. Press the Select soft key or
the OK / key an empty note screen displays. Enter the following
information:
Note: Enter details about the event and press the Save or back soft key.
Viewing an Event
1.
In Idle mode, press the Menu soft key to access menu mode.
Section 9: Multimedia 109
2.
Select Applications and press the Select soft key or the OK / key.
3.
Highlight Calendar and press the Select soft key or the OK / key.
4.
Highlight Month View and press the Select soft key or the OK / key.
The calendar displays with today date highlighted.
5.
Select the date of the event (s) you want to view and press the OK / key or
use the Navigation keys to move to the date with an assigned event.
Note: The icon categories displayed at the bottom of the Month view display any events scheduled for the
day you selected.
The following icons denote events:
Schedule
Anniversary
Miscellaneous
6.
Press the Up or Down Navigation key to scroll to the previous or next
event.
If you want to create a new event for that date while viewing an event
press the Options soft key and select Create, press the Select soft key, or
the Right Navigation key or the OK / key.
7.
Press the OK / key or press the Options soft key, select View and press
the Select soft key or the OK / key. The event appears in the display.
Press the Options soft key, to access the event view options.
䢇 View Mode: allows you to select how you want to view the calendar memos.
Choose the following vowing options, Day View, Week View, or Month View.
䢇 Create: allows you to create a new (Schedule, Anniversary, or Miscellaneous)
entry.
䢇 Go to: allows you to go to Today’s date or another Date.
䢇 Delete: allows you to delete the selected event, events during a specific period,
events during the month, or all events.
9. When you have finished, press the
key.
8.
Tools
The tools menu includes the calculator, converter, timer, stopwatch, and world time
clock. To access this menu, use the following steps:
1.
110
In Idle mode, press the Menu soft key to access menu mode.
2.
Select Applications and press the Select soft key or the OK / key.
3.
Highlight Tools and press the Select soft key or the OK / key. The
following options are displayed.
Calculator
With this feature, you can use the phone as a calculator. The calculator provides the
basic arithmetic functions; addition, subtraction, multiplication, and division.
1.
Highlight Calculator and press the Select soft key or the OK / key.
2.
Enter the first number using the numeric keys.
Note: To include a decimal point or a bracket, press the left soft key until the symbol you want displays.
3.
Enter the operation for your calculation by pressing the Navigation keys,
according to the illustration on the display.
4.
Enter the second number.
5.
To view the result, press the OK / key.
Converter
The conversion menu provides the following conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
Timer
You can use this menu to set a countdown timer. To enable the Timer, use the
following options:
1.
Press the Set soft key to enter the length of time.
2.
Enter the time and press the OK soft key.
3.
Press the OK / key to start the timer. Press the OK / key to stop the timer.
Stopwatch
You can use this menu to measure intervals of time for 4 separate times. Press the
OK / key to start the stopwatch. Press the OK / to stop the stopwatch. Press the
Reset soft key to erase all times recorded.
Section 9: Multimedia 111
World Time
World Time allows you to view the time of day or night in another parts of the world.
World displays time in the 24 different time zones around the world.
1.
Highlight World Time and press the Select soft key or the OK / key.
2.
Use the Left or Right Navigation keys to browse cities and times.
Press the Options soft key, to access the world time options.
䢇 Save: allows you to select the currently shown time zone as the default.
䢇 Set Daylight Saving Time: allows you to enable/disable DST for your default
city/time.
4. When you have finished, press the
key.
3.
Record Audio
Record Audio allows you to record voice memos. It also allows you to send your
audio clip to other people as an attachment of an MMS message. Recording time is
limited to the phone’s memory space available.
1.
In Idle mode, press the Menu soft key to access menu mode.
2.
Select Media and press the Select soft key or the OK / key.
3.
Highlight Record Audio and press the Select soft key or the OK / key.
4.
To start recording, press the OK / key.
5.
Record a memo by speaking into the microphone.
6.
Press the OK / to stop and restart recording or press the Stop soft key to
save recording.
If the recording time expires, the message is automatically saved. Press
the Options soft key to display the following options:
䢇 Play: plays back your memo.
䢇 Record: launches Record Audio screen to create a new voice memo.
䢇 Go to Recorded Audio: launches the Audio list screen to select from your voice
memos.
䢇 Send Via: allows you to send your memo to other people by using the MMS or
Bluetooth.
䢇 Delete: allows you to delete the memo.
䢇 Rename: allows you to change the memo’s name.
䢇 Protection: use to protect recorded audio files from being deleted.
䢇 Properties: displays the Name, Date, Format, Length, Size, and Protection of the
voice memo.
7. To exit, press the Back soft key or the
key.
112
Audio List
This menu shows a list of saved voice memos.
1.
In Idle mode, press the Menu soft key to access menu mode.
2.
Select Media and press the Select soft key or the OK / key.
3.
Highlight Record Audio and press the Select soft key or the OK / key.
Press the Options soft key to display the following options:
䢇 Record: record a voice memo.
䢇 Go to Recorded Audio: displays the Audio List.
5. Highlight Go to Recorded Audio and press the Select soft key or the OK /
key. The Audio screen appears in the display.
4.
Highlight a voice memo, then press the Options soft key to display the
following options:
䢇 Play: plays the memo.
䢇 Send via: allows you to send the memo to other people by using the MMS or
Bluetooth.
䢇 Delete: allows you to delete selected or all voice memos.
䢇 Rename: allows you to change the memo’s name.
䢇 Move to: allows you to move this voice memo to your favorite audio folder or
memory card (if one is inserted).
䢇 Copy to memory card: copies all or selected Audio to the memory card.
䢇 Share for Bluetooth: allows the selected audio file to be shared using Bluetooth.
䢇 Protection: use to protect recorded audio files from being deleted.
䢇 Properties: displays information about the memo, such as the name, the date
when the memo was made, format, length, protection, and memory size.
7. To exit, press the Back soft key or the
key.
6.
Other Files
This menu option is for files that have been sent to you via Bluetooth. To access this
option use the following steps:
1.
In Idle mode, press the Menu soft key to access menu mode.
2.
Select File Manager and press the Select soft key or the OK / key.
3.
Highlight Other Files and press the Select soft key or the OK / key.
4.
Highlight Other Files or Memory Card and press the Select soft key or
the OK / key.
5.
Highlight the desired file and press the Select soft key or the OK / key.
Section 9: Multimedia 113
Memory Card
The Memory Card provides additional storage for several file types. They are:
• Sounds
• Images
• Videos
• Music
• Other Files
• Photos Memory Card
• Pictures Memory Card
• Videos Memory Card
• Music Memory Card
• Sounds Memory Card
• Other’s Memory Card
Memory Status
You can check the amount of the memory being used for the My Files, Games, and
Applications. The display shows the total space used.
114
1.
In Idle mode, press the Menu soft key to access menu mode.
2.
Select File Manager and press the Select soft key or the OK / key.
3.
Highlight Memory Status and press the Select soft key or the OK / key.
4.
Choose from My MEdia, Games, or Applications and press the Select soft
key or the OK / key to view the space usage for each folder.
Section 10: WAP
Topics Covered
• Launching the WAP Browser
• Access a WAP Site
• Navigating the WAP Browser
• Using Favorites
• Clearing the Cache
Your phone is equipped with a WAP (Wireless Application Protocol) browser which
allows you to access Internet specified for mobile phones. This section explains
how to access the WAP services of your service provider and navigate the WAP
browser.
Section 10: WAP 115
Launching the WAP Browser
1.
In Idle mode, press the OK / key to launch the WAP browser. You can also
press the Menu soft key to access menu mode and highlight Internet and
press the Select soft key or the OK / key.
2.
Highlight Home and press the Select soft key or the OK / key. Your phone
is connected to the network and loads the homepage of the Wireless Web
service provider. The content of the start-up homepage depends on your
Wireless Web service provider.
3.
To scroll through the screen, use the Up and Down navigation keys.
4.
To exit the browser at any time, simply press the
key.
Access a WAP Site
There are several ways to access a WAP site:
• Selecting a link on the browser
• Using a bookmark item in the Favorites folder; use the Bookmarks option on the
browser menu list or Favorites menu.
• Entering a URL address manually; use the Go to URL option on the browser menu
list.
Navigating the WAP Browser
1.
To scroll through browser items, press the Up or Down Navigation keys.
2.
To select a browser item, press the OK / key or press the Options soft key
and choose Select.
3.
To return to the previous page, press the
soft key and choose Back.
4.
To access the browser menu list, press the Menu soft key.
5.
To return to the start-up homepage, press the Menu soft key and select
the Home option.
key, or press the Options
Entering Text in the WAP Browser
When you are prompted to enter text, the currently active text input mode is
indicated on the screen. To change the text input mode, press the OK / key one or
more times.
The following modes are available:
Upper-Case Alphabet Mode (A): allows you to enter upper-case characters.
Lower-Case Alphabet Mode (a): allows you to enter lower-case characters.
116
Note: You can enter symbols in upper or lower case alphabet mode by pressing the 1 key.
T9 Mode (T9): allows you to enter characters by pressing one key per letter. In this
mode, you can use only the 0 key to display alternative words. To change case,
press the * key.
Number Mode (1): allows you to enter numbers.
Selecting and Using Menu Options
Various menus are available when you are using the WAP Browser to navigate the
Wireless Web.
To access a menu option, press the menu soft key. A menu list displays.
Note: The menus may vary, depending on your version of the WAP Browser.
The following options are available:
• Favorites: shows the bookmarks list. You can bookmark the current page or access
previously bookmarked pages.
• Reload: reloads the current page.
• Home: takes you back at any time to the homepage of the Wireless Web service
provider.
• Go to URL: allows you to manually enter the URL address of a WAP site. After
entering an address, press the OK soft key to go there directly.
• Show URL: displays the URL address of the page to which you are currently
connected. It also enables you to set the current site as the startup homepage.
• Clear Cache: deletes the information stored in the cache. The cache stores the
most recently accessed pages.
• Inbox: stores incoming SMS, Multimedia, CB and WAP message.
• Show Images: shows the image on the current page. Press the Next soft key to
view the next images.
• Certificates: shows the security information when you access the Wireless Web
with the secured WAP setting activated.
• Text Message: allows you to send messages using the WAP server.
Using Favorites
While navigating the WAP browser, you can bookmark the site to quickly and easily
access it at a future time. The URL addresses of the bookmarked sites are stored in
the Favorites folder.
Section 10: WAP 117
Accessing a WAP Site Using Favorites
1.
In Idle mode, press the OK / key to launch the WAP browser. You can also
press the Menu soft key to access menu mode and highlight Internet and
press the Select soft key or the OK / key.
2.
Select Favorites.
3.
Select a bookmark item on the Favorite list.
Storing a URL Address
1.
In Idle mode, press the OK / key to launch the WAP browser. You can also
press the Menu soft key to access menu mode and highlight Internet and
press the Select soft key or the OK / key.
2.
Select Favorites.
3.
Select an <Empty> location, and press the Select soft key
4.
Enter the name and address and press the Save soft key or OK / key.
5.
When you have finished, press the
key.
Editing a Bookmark
1.
From the Favorite list, select the bookmark you want to change.
2.
Select Options and select Edit.
3.
Change the address and the name, as you would when storing a new one.
4.
When you have finished, press the
key.
Deleting a Bookmark
1.
From the Favorites list, select the bookmark you want to delete.
2.
Select Options, select Delete, and select Selected or All.
3.
Press the Yes soft key or the OK / key to confirm the deletion.
4.
When you have finished, press the
key.
Clearing the Cache
The cache is the phone’s temporary memory in which the most recently accessed
WAP pages are stored. You can clear the cache at anytime.
118
1.
In Idle mode, press the OK / key to launch the WAP browser. You can also
press the Menu soft key to access menu mode and highlight Internet and
press the Select soft key or the OK / key.
2.
Select Clear Cache.
3.
Press the Yes soft key or the OK / key to confirm the deletion.
4.
When you have finished, press the
key.
Changing the WAP Profiles
You can set up server profiles for the WAP browser.
1.
In Idle mode, press the Menu soft key to access Menu mode.
2.
Select Settings. Highlight Connection Settings and press the Select soft
key or the OK / key.
3.
Select the profile you want.
For each profile, the following options are available:
䢇 Profile Name: enter a name that you wish to assign to the HTTP proxy server.
䢇 Home URL: set the address of your startup homepage. When the default
homepage displays, you can delete it using the
key and enter your own
choice.
䢇 Proxy: place a check in the box to use the proxy server.
䢇 IP Address: enter the IP address of the proxy server.
䢇 Port: enter a port number or use default setting.
䢇 DNS
ⳮ DNS1: enter the primary DNS (Domain Name System) address.
DNS2: enter the secondary DNS address.
Bearer: select the bearer to be used for each type of network address accessed:
GPRS or GSM. The remaining options depend on the Bearer setting.
When the bearer is set to GPRS:
䢇 APN: enter the access point name used for the address of the GPRS network
gateway.
䢇 Login ID: enter the User ID required to connect to the GPRS network.
䢇 Password: enter the password required to connect to the GPRS network.
When the bearer is set to GSM:
䢇 Dial Number: enter the PPP server phone number
䢇 Login ID: enter the PPP server login ID.
䢇 Password: enter the PPP server password.
䢇 Data Call Type: select a data call type: Analog or ISDN.
ⳮ
䢇
Note: The WAP settings may vary depending on the service provider.
Section 10: WAP 119
Section 11: Accessibility
Topics Covered
• TTY Settings*
120
TTY Settings*
TTY (also known as a TDD or Text Telephone) is a telecommunications device that
allows people who are deaf or hard of hearing, or who have speech or language
disabilities, to communicate via a telephone.
Note: The TTY option is accessible only by inserting a TTY adaptor (20-pin plug-to-2.5 mm jack) into the
headset jack on the left side of your phone.
Use the following steps to access the TTY feature:
1.
Insert the 20-pin connector on the TTY adapter into the headset jack on
the left side of your phone. “Cellular Text Telephone Modem Enabled”
pops up in the display.
Note: Inserting the TTY adapter automatically disables the phone’s earpiece and microphone.
Disconnecting the TTY adapter from the phone automatically restores the earpiece and microphone to their
normal functions.
2.
Connect the telecommunications device to the 2.5 mm jack on the TTY
adapter.
For additional technical support you may access the following website or call 1-888987-4357.
http://www.samsungtelecom.com/contact_us/accessibility.asp
Section 11: Accessibility 121
Section 12: Health and Safety Information
Topics Covered
• Health and Safety Information
This section outlines the safety precautions associated with using your phone.
These safety precautions should be followed to safely use your phone.
122
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for radio frequency (RF) energy set
by the Federal Communications Commission (FCC) of the U.S. government. These
FCC exposure limits are derived from the recommendations of two expert
organizations, the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,
the recommendations were developed by scientific and engineering experts drawn
from industry, government, and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body expressed in units of watts
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a
substantial margin of safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in positions and locations (e.g. at
the ear and worn on the body) as required by the FCC. For body worn operation, this
phone has been tested and meets FCC RF exposure guidelines when used with an
accessory that contains no metal and that positions the handset a minimum of 1.5
cm from the body. Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
Section 12: Health and Safety Information 123
guidelines. The maximum SAR values for this model phone as reported to the FCC
are:
GSM 850
䢇 Head: 0.516 W/Kg.
䢇 Body-worn: 1.18 W/Kg.
PCS 1900
䢇 Head: 0.689 W/Kg.
䢇 Body-worn: 0.717 W/Kg.
SAR information on this and other model phones can be viewed on-line at
www.fcc.gov/oet/fccid. To find information that pertains to a particular model phone,
this site uses the phone FCC ID number which is usually printed somewhere on the
case of the phone. Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a particular phone, follow the
instructions on the website and it should provide values for typical or maximum SAR
for a particular phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
UL Certified Travel Adaptor
The Travel Adaptor for this phone has met UL 1310 safety requirements. Please
adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN THE U.S.A., USE AN ATTACHMENT PLUG
ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET.
THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of Questions
and Answers for consumers relating to radio frequency (RF) exposure from wireless
phones. The FDA publication includes the following information:
124
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio frequency energy (RF) because of
the short distance between the phone and the user's head. These RF exposures are
limited by Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with increasing
distance from the source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at far lower power
levels, and thus produce RF exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radio frequency
energy (RF) in the microwave range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type emitted by
wireless phones;
Section 12: Health and Safety Information 125
• Design wireless phones in a way that minimizes any RF exposure to the user that is
not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible information
on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon.
While these base stations operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions discussed in this
document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories. A
few animal studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the studies that
showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other studies exposed the animals to RF
for up to 22 hours per day. These conditions are not similar to the conditions under
which people use wireless phones, so we don't know with certainty what the results
of such studies mean for human health.
126
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use of
wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phones RF exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these studies was
around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-up may be needed to
provide answers about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring actual RF exposure
during day-to-day use of wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health Organization international
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result
of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF
issues.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific oversight, obtaining input from
Section 12: Health and Safety Information 127
experts in government, industry, and academic organizations. CTIA-funded research
is conducted through contracts to independent investigators. The initial research will
include both laboratory studies and studies of wireless phone users. The CRADA will
also include a broad assessment of additional research needs in the context of the
latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is
- it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every day, you could
place more distance between your body and the source of the RF, since the
exposure level drops off dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or use a wireless phone
connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from wireless
phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to
radio frequency energy (RF), the measures described above would apply to children
and teenagers using wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
128
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the head. On the other hand, if
the phone is mounted against the waist or other part of the body during use, then
that part of the body will absorb more RF energy. Wireless phones marketed in the
U.S. are required to meet safety requirements regardless of whether they are used
against the head or against the body. Either configuration should result in
compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have shown that these products
generally do not work as advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an increase in RF absorption. In
February 2002, the Federal trade Commission (FTC) charged two companies that
sold devices that claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to FTC, these defendants
lacked a reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary
Section 12: Health and Safety Information 129
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance requirements for hearing aids and
wireless phones so that no interference occurs when a person uses a compatible
phone and a compatible hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various sources can be
obtained from the following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/topics/emf/
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• Radiation Protection Division of Health Protection Agency (UK):
http://www.hpa.org.uk/radiation/
• Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to communicate by voice, almost
anywhere, anytime. But an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless
phone behind the wheel of a car, practice good common sense and remember the
following tips:
1.
130
Get to know your wireless phone and its features, such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2.
When available, use a hands-free device. If possible, add an additional
layer of convenience and safety to your wireless phone with one of the
many hands free accessories available today.
3.
Position your wireless phone within easy reach. Be able to access your
wireless phone without removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice mail answer it for you.
4.
Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be hazardous.
5.
Do not take notes or look up phone numbers while driving. Jotting down a
"to do" list or flipping through your address book takes attention away
from your primary responsibility, driving safely.
6.
Dial sensibly and assess the traffic; if possible, place calls when you are
not moving or before pulling into traffic. Try to plan calls when your car will
be stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
7.
Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that have the potential to divert your attention from
the road.
8.
Use your wireless phone to call for help. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless phone!
9.
Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency number.
"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our web-site www.wowcom.com
Provided by the Cellular Telecommunications & Internet Association.
Section 12: Health and Safety Information 131
Operating Environment
Remember to follow any special regulations in force in any area and always switch
your phone off whenever it is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that for the
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that the equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your shoulder if you are
using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches)
be maintained between a wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from their pacemaker
when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize potential interference.
If you have any reason to suspect that interference is taking place, switch your
phone off immediately.
Hearing Aid Compatibility with Mobile Phones
When some mobile phones are used near some hearing devices (hearing aids and
cochlear implants), users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
The wireless telephone industry has developed ratings for some of their mobile
phones, to assist hearing device users in finding phones that may be compatible
132
with their hearing devices. Not all phones have been rated. Phones that are rated
have the rating on their box or a label on the box.
The ratings are not guarantees. Results will vary depending on the user’s hearing
device and hearing loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone successfully. Trying out the
phone with your hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to
generate less interference to hearing devices than phones that are not labeled. M4 is
the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more
usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than
unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing
devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type of interference.
Your hearing device manufacturer or hearing health professional may help you find
results for your hearing device. The more immune your hearing aid is, the less likely
you are to experience interference noise from mobile phones.
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information. Switch your phone
off in health care facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require you to do so.
Section 12: Health and Safety Information 133
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service station).
Users are reminded of the need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), areas where the
air contains chemicals or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and
landline networks as well as user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never rely solely on any wireless
phone for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and in a
service area with adequate signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
1.
If the phone is not on, switch it on.
2.
Key in the emergency number for your present location (for example, 911
or other official emergency number). Emergency numbers vary by location.
3.
Press the
key.
If certain features are in use (call barring, for example), you may first need to
deactivate those features before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information as
accurately as possible. Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off the call until given
permission to do so.
134
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the phone or make calls that increase
your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving
equipment. The FCC can require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries, antennas and chargers. The
use of any unauthorized accessories may be dangerous and void the phone warranty
if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in the same
compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag inflates with great
force. Do not place objects, including both installed or portable wireless equipment
in the area over the air bag or in the air bag deployment area. If wireless equipment
is improperly installed and the air bag inflates, serious injury could result.
• Switch your phone off before boarding an aircraft. The use of wireless phone in
aircraft is illegal and may be dangerous to the aircraft's operation.
• Failure to observe these instructions may lead to the suspension or denial of
telephone services to the offender, or legal action, or both.
Section 12: Health and Safety Information 135
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your
area. Your phone informs you of the current signal strength by displaying a number
of bars next to the signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a Power Save
feature is automatically activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your
phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
• If your phone is equipped with an external antenna, hold the phone with the antenna
raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the internal antenna
could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If your phone
does get wet, immediately turn the power off and remove the battery.
136
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require additional
subscription and/or usage charges. Not all features are available for purchase or use
in all areas. Downloadable Ring Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage patterns and conditions.
Battery power consumption depends on factors such as network configuration,
signal strength, operating temperature, features selected, frequency of calls, and
voice, data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard surface, can
potentially cause damage to the phone and battery. If you suspect damage to the
phone or battery, take it to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses less power; talk and
standby time are greatly affected by the signal strength on the cellular network and
the parameters set by the network operator.
• Follow battery usage, storage and charging guidelines found in the user’s guide.
• Battery charging time depends on the remaining battery charge and the type of
battery and charger used. The battery can be charged and discharged hundreds of
times, but it will gradually wear out. When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only with
Samsung-approved chargers. When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger for more than a
week, since overcharging may shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web sites and
second-hand dealers, not associated with reputable manufacturers and carriers,
might be selling incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier recommended products and
accessories. If unsure about whether a replacement battery or charger is
compatible, contact the manufacturer of the battery or charger.
• Extreme temperatures will affect the charging capacity of your battery: it may
require cooling or warming first.
Section 12: Health and Safety Information 137
• Do not leave the battery in hot or cold places, such as in a car in summer or winter
conditions, as you will reduce the capacity and lifetime of the battery. Always try to
keep the battery at room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or near a cooking
surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and appear to
operate normally, the circuitry could slowly corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object (coin, clip or pen) causes a direct connection between the + and terminals of the battery (metal strips on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal objects, such
as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery as this can
cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some areas, the
disposal of batteries in household or business trash may be prohibited. For safe
disposal options for Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a fire.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its customers to recycle
Samsung mobile phones and genuine Samsung accessories.
Go to:
http://www.samsungwireless.com/recycling.htm
for more information.
Care and Maintenance
Your phone is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you fulfill any warranty obligations and
allow you to enjoy this product for many years.
• Keep the phone and all its parts and accessories out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will
corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric shock to you
or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts may be
damaged.
138
• Do not store the phone in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms up to its normal
operating temperature, moisture can form inside the phone, which may damage the
phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the device's moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices, such as a microwave oven, a stove or
a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the supplied or an
approved replacement antenna. Unauthorized antennas or modified accessories
may damage the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly, take it to
your nearest qualified service facility. The personnel there will assist you, and if
necessary, arrange for service.
[09/05/06]
Section 12: Health and Safety Information 139
Section 13: Warranty Information
Topics Covered
• Standard Limited Warranty
140
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (“SAMSUNG”) warrants to the original
purchaser (“Purchaser”) that SAMSUNG's Phones and accessories (“Products”) are
free from defects in material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for the following
specified period of time after that date:
Phone
Batteries
Leather Case/ Pouch
Holster
Other Phone Accessories
1 Year
1 Year
90 Days
90 Days
1 Year
What is Not Covered? This Limited Warranty is conditioned upon proper use of
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or
electromechanical stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched
or damaged due to normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased outside the United States or
Canada. This Limited Warranty covers batteries only if battery capacity falls below
80% of rated capacity or the battery leaks, and this Limited Warranty does not cover
any battery if (i) the battery has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery
are broken or show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period,
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to
Purchaser, any defective component part of Product. To obtain service under this
Limited Warranty, Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the date of purchase, the
Section 13: Warranty Information 141
serial number of Product and the sellers' name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts
or components when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases, pouches and
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced
Product will be warranted for a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days, whichever is longer. All replaced
parts, components, boards and equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges for the repair or return of
such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT “AS IS,” AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• “THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE;
• “WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• “DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• “THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR
• “COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,
142
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED
BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME
STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY
BE.
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by SAMSUNG and should not be
relied upon.
Section 13: Warranty Information 143
Samsung Telecommunications America, L.P.
1000 Klein Street
Plano, Texas 75074
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2006 Samsung Telecommunications America, L.P. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
Printed in Korea
144
Command Keys 21
Contacts
Searching for a Number 28
Converter 111
Index
A
D
Accessing a Menu Function 31
Alerts on Call 74
Alphabet mode 41
Applications 104
Audio 88
Audio List 113
Dialing a Number
Contacts 46
Display
icons 19
Display Settings 74
B
E
Back Light 19
Battery
charging 10
installing 10
low indicator 12
removing 8
End key 22
Ending a Call 24
Entering Text 40
Changing the Text Entry
Mode 41
Using Numbers 44
Using Symbols 43
Using T9 Mode 42
C
Call Functions
Adjusting the Call
Volume 25
Answering a Call 25
Correcting the Number 24
Making a Call 24
Quiet Mode 26
Recent Calls 26
Redialing Last Number 24
Call Waiting 29 79
Camera 92
Taking Pictures 93
camera options 93
Charging battery 10
Clear key 21
,
F
Functions and Options 20
G
Games 91
Getting Started 7
Activating Your Phone 8
Voicemail 13
Graphics 90
Greeting Message 77
H
Health and Safety Information 122
145
I
Icons, description 19
Idle Screen Setting 75
Installing microSD Card 11
International Call 24
K
Network Services 78
Call Forwarding 78
Number mode 41
O
Options
During a Call 27
Putting a Call on Hold 27
Keypad Tone 72
L
Left soft key 21
Low battery indicator 12
M
Making a Call
Contacts 25
Media 92
Memory Card 114
Menu Navigation 30
Menu Outline 31
Messaging 55
Types of Messages 56
mircroSD Card 11
Missed Call
Deleting 26
Viewing 26
MP3 Player 92
Multimedia 88
Music 91
Mute 28
N
Navigation key 22
Network Selection 79
146
P
Personal Assistant
Alarm 104
Calculator 111
Calendar 106
Phone
icons 19
Powering on/off
phone 12
R
Record
Voice Memo 112
Right soft key 21
S
Security 82
Send key 22
Settings 71
Sound Settings 72
Shortcuts 31
SIM card
installing 8
removing 9
Soft Keys 21
Speakerphone 28
Speed Dial
Setting Up Entries 50
Standard Limited Warranty
Standard Limited
Warranty 141
Storing a Number
Contacts 46 48
Storing a number
Phone’s Memory 46
SIM Card 48
,
T
T9 Mode
enter a word 42
T9 mode 41
Text Input Mode
Changing 41
Text Messages 57
Tools 110
Travel adapter 10
Using Management
Checking the Memory
Status 54
Copying all to Phone 53
Default Saving 53
Deleting all of the Phone
book Entries 53
V
Video 90
Video Options 99
Viewing an Event 109
Voice Mail 13
changing number 13
W
Warranty Information 140
U
Understanding Your Contacts 45
Adding a New Contact 46
Management 53
My Name Card 52
Own Phone Number 52
Using Caller Groups 49
Using Contacts List 46
Using Speed Dial 50
Understanding Your Phone 15
Features of Your Phone 16
Front View of Your
Phone 17
Open View of Your
Phone 16
147
148
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising