Professional Labelmaker User Guide w US NZ AUS Auto-cutter USB Connector AC Power Connector LCD Display Label Exit Label cassette door release w w w. d Font Size/Style Font/Fixed Length Underline-Box/Align Symbols y mo. c om Power Manual Cutter Settings Memory Language Preview/Insert Settings Language 1 Q ? : 2 W A Tab CAPS Symbols Insert ! CAPS – 33 E Z + 4 R S 6/ 5 T D X Print Cancel 1,2...n Memory Preview Shift # 8@ B SPAC E Cancel , , . P Clear/Delete ~ L , M Navigation Arrows & OK Clear K J N 0 O I H G V 9& U Y F C 7 Enter N . $ Shift Space Bar Shift Figure 1 ExecuLabel LM450 Professional Labelmaker 2 Return/Enter Currency US About Your New Labelmaker AUS NZ With your new DYMO ExecuLabel™ LM450 labelmaker, you can create a wide variety of highquality, self-adhesive labels. You can choose to print your labels in many different sizes and styles. The labelmaker uses DYMO D1 label cassettes in widths of 1/4” (6 mm), 3/8” (9 mm), 1/2” (12 mm), 3/4” (19 mm), or 1” (24 mm). Label cassettes are also available in a wide range of materials. Visit www.dymo.com for information on obtaining labels and accessories for your labelmaker. 2. Insert the batteries following the polarity markings (+ and –). Warranty Registration 3. Replace the battery compartment cover. Please complete the warranty registration card and return it to the appropriate Customer Support address within seven days of purchase. Visit www.dymo.com/registration for details. Remove the batteries if the labelmaker will not be used for a long period of time. Getting Started Follow the instructions in this section to print your first label. Connecting the Power The labelmaker can operate on AC or battery power. To save power, the labelmaker will automatically turn off after two minutes of inactivity. Inserting the Batteries The labelmaker uses six 1.5 volt high-capacity AA alkaline batteries. To insert the batteries 1. Remove the battery compartment cover. See Figure 2. Figure 2 Connecting the Power Adapter An optional AC power adapter can also be used to power the labelmaker. Connecting the power adapter to the labelmaker disconnects the batteries as a power source. To connect the power adapter 1. Plug the power adapter into the power connector on the top, left side of the labelmaker. 2. Plug the other end of the power adapter into a power outlet. Make sure the labelmaker power is turned off before you disconnect the power adapter from the main power source. Otherwise, your most recent memory settings will be lost. Inserting the Label Cassette Your labelmaker comes with one DYMO D1 label cassette. Visit www.dymo.com for information about purchasing additional label cassettes. 3 To insert the label cassette 1. Press and release the label cassette cover to open the label compartment. See Figure 3. CLICK! Figure 5 Figure 3 The first time you use the labelmaker, remove the protective cardboard insert from between the print head and pinch roller. See Figure 4. Remove cardboard insert 4. Press firmly until cassette clicks into place. When positioned correctly, you will hear the labelmaker wind the label ribbon into place. 5. Close the label cassette cover and press A to turn on the power. The Label Settings menu automatically appears immediately after inserting a new label cassette. 6. Use the arrow keys to select the label width of the label cassette currently in the labelmaker and press . Settings You can set the language, current date and time, and the units of measure you want the labelmaker to use. Figure 4 2. Make sure the label and ribbon is taut across the mouth of the cassette and that the label passes between the guideposts. If necessary, turn the spool clockwise to tighten the ribbon. 3. Insert the cassette with the label and ribbon positioned between the print head and pinch roller. See Figure 5. 4 Selecting a Language You can select from a number of different language options. By default, the language is set to English. To select a language 1. Press . Language 2. Use the arrow keys to select the language you want and press . Setting the Current Date The default date format depends upon the language selection for the labelmaker. You can change the default date format by following the instructions in Changing the Date Format on page 10. To set the date 1. Press . Settings 2. Select Set Date, and press is displayed. . The default date To set the units of measure 1. Press . Settings 2. Use the arrow keys to select Set Units and press . 3. Select inches or millimeters and press Printing Your First Label You are now ready to print your first label. To print a label 1. Enter text to create a simple label. 2. Press 3. Move the cursor over each setting (month, day, and year) and use the arrow keys to increase or decrease the value. 4. When finished, press . Setting the Current Time The default time format depends upon the language selection for the labelmaker. You can change the default time format by following the instructions in Changing the Time Format on page 11. To set the time 1. Press Settings. 2. Select Set Time, and press time is displayed. . The default 3. Move the cursor over each setting (hours and minutes) and use the arrow keys to increase or decrease the value. 4. When finished, press . . 1,2...n . The label is automatically cut. The Auto Cut feature is turned on by default. To disable the Auto Cut feature, see Changing the Cutting Option on page 13. 3. Remove the label. Congratulations! You have printed your first label. Continue reading to learn more about the options available for creating labels. Getting to Know the Labelmaker The following sections describe each feature in detail. Become familiar with the location of the feature and function keys on your labelmaker. See Figure 1 on the inside front cover. Power The A button turns the power on and off. After two minutes of no activity, the power is switched off automatically. The last label created is remembered and displayed when the power is turned back on. The previously selected style settings are also restored. Selecting Units of Measure LCD Display You can choose to show measurements in inches or millimeters. The default units of measure depends upon the language chosen. The labelmaker’s LCD display shows a row of up to 16 characters. However, you can enter up to 99 characters and spaces. 5 The display window can accommodate 16 uppercase characters. As you type more characters, they begin to scroll to the left. (See Figure 6.) The number of characters actually displayed can vary due to proportional spacing. The quick brown fox jumps over the lazy dog. Figure 6 In addition, feature indicators appear on the display to let you know when a feature is selected. See Figure 7. Font and Size deleted; however, when you press + together, the entire label text and formatting is deleted and the display is ready for you to type a new label. Clear Shift Space Bar The V key inserts one or more blank spaces in your text. Clear/Delete The key removes the character to the left of the cursor. + clears all label text and formatting. Clear Clear Shift Style Scroll Cancel BIG The key allows you to exit from a menu without making a selection or to cancel an action. Cancel Auto Cut # of Copies Mixed Formats Underline/Box Align/Justify Fixed Length Multiple Lines CAPS mode Navigation Keys Figure 7 CAPS Mode The CAPS key toggles capitalization on and off. When CAPS mode is turned on, the CAPS mode indicator is shown on the display and all letters that you enter will be capitalized. The default setting is CAPS mode on. When CAPS mode is off, all letters entered appear in lower case. Shift Key The key, when used in combination with an alphabet key, changes the case of the selected letter. When used in combination with number keys or function keys, the key selects the alternate function shown on the key. For example, when you press , the character to the left of the cursor is Shift Shift Clear 6 C With the keys, you can review and edit your label, and navigate through the menus. Use the left and right arrow keys to move the cursor along the label text or to move through fields. Use the up and down arrow keys to increase or decrease settings and to select menu items, and then press to accept the selection. Connecting to Your Computer Your labelmaker can be used as a standalone label printer or you can print labels from your computer using DYMO LabelMANAGER software. Your labelmaker connects to your computer using the USB connection located on the top of the labelmaker. See Figure 8. To set the font 1. Press the key. 2. Use the arrow keys to move to the desired font and then press . Adding Font Styles Figure 8 You can choose from many different font styles to apply to your text: Refer to the ExecuLabel LM450 Quick Start Guide for installation instructions and the DYMO LabelMANAGER Software User Guide for information about designing and printing labels. Normal Formatting Your Label Outline You can choose from a number of formatting options to enhance the appearance of your labels. The labelmaker remembers the last feature selection made so that each time you enter one of the feature menus described in this section, you are positioned at the last item selected from that menu. Changing the Font Seven fonts are available for your labels: Arial Narrow Arial Normal Arial Wide BIG Times New Roman When you specify a font, that font applies to all characters on the label. If you want to use more than one font, you must insert format breaks. See Using Mixed Formats on page 9 for more information. Bold Italic Shadow 3D Strike-through Vertical Mirror Italic + Bold Italic + Outline Italic + Shadow Italic + 3D When you select a style, that style applies to all characters on a label. If you want to use more than one style, you must insert format breaks. See Using Mixed Formats on page 9 for more information. However,when you use mirror or vertical style, that style applies to the whole label. Styles can be used with alphanumeric characters and symbols. See Using Symbols and Special Characters on page 9 for more information on printing symbols. 7 To set the font style 1. Press the key. 2. Use the arrow keys to move to the desired style and then press . Adding Box and Background Styles You can further highlight your text by choosing a box, underline, or background style. You can also use label text stored in memory as background text on your label. See Storing Label Text on page 13 for information on storing text in memory. A label can be underlined or enclosed in a box or background, but not both together. The styles available are shown in Figure 9. DYMO Underline DYMO Square Box DYMO Pointed Box DYMO Rounded Box DYMO Crocodile Box DYMO Scroll Box 3D Box DYMO DYMO 8 2. Select Text Background (TXT) and then press . The first memory location is displayed. 3. Use the arrow keys to select the stored text you wish to use as a background and press . Creating Multi-Line Labels The number of lines you can print on a label depends on the width of the label you are using: • Maximum of five lines on 3/4" (19 mm) and 1” (24 mm) labels • Maximum of three lines on 3/8" (9 mm) and 1/2" (12 mm) labels • Maximum of one line on 1/4" (6 mm) labels Checkers 2. Type the text for the second line. Parquet The display shows the line on which you are currently entering text. The example below indicates that the second line is the current line on the label. Weave Figure 9 . On multi-line labels, all lines are underlined. In box style mode, all lines are enclosed in one box style. To select a text background 1. Press the key. Bricks Diamonds DYMO 2. Select a frame style and then press To create a multi-line label 1. Type the text for the first line, and press .A new line character is placed at the end of the first line in the display, but will not print on the label. Dots Wood Grain ExecuLabel LM450 Background patterns are not available for 6 mm label. To set the box style 1. Press the key. Enter Text Background Use the arrow keys to move between lines. Using Mixed Formats Adding Symbols You can apply different fonts and format styles to the text on a label by inserting format breaks to divide the label into blocks or sections of text. Each section is separated by a format break. You can add two format breaks, allowing you to apply three separate formats to a label. Alignment, underline, box styles, and background patterns cannot be mixed on a label.These styles are common to the entire label. To add a format break 1. Enter and format text for the first section. The labelmaker supports the extended symbol set as shown in Figure 10: 2. Press Preview Insert . 3. Select Insert Format Break and press . 4. Continue entering and formatting text for the next section of the label. Using Tabs You can add tabs to a label to align text on multiline labels. Tabs are left justified and the default spacing is 2.0” (50 mm). To change the tab spacing 1. Press . Settings 2. Select Set Tab Length and press . 3. Use the up and down arrow keys to increase or decrease the tab setting, and then press . To insert a tab 1. Enter your text. 2. Press the key and continue entering text. Using Symbols and Special Characters Symbols and other special characters can be added to your labels. Figure 10 9 To add a symbol 1. Press . The first row of symbols shown in the table appears in the display. Symbols 2. Use the arrow keys to move to the desired symbol. The left and right arrows move horizontally along a row of symbols. The up and down arrow keys scroll vertically through the rows of symbols. To quickly see a row of symbols, you can press the letter corresponding to the row you want. 3. When you locate the desired symbol, press to add the symbol to your label text. Adding International Characters The labelmaker supports the extended Latin character set using RACE technology. Similar to using a mobile phone keypad, if you type a letter multiple times within a very short time, you will scroll through variations on that letter. For example, if French is selected as the language and you repeatedly press the letter a, you will see a à â æ and so on through all the variations available. The character variations and the order in which the variations appear depend on the language you have selected to use. Currency Symbols Changing the Date Format You can choose from twelve different date formats: 24/12/2004 12/24/2004 24/12/04 12/24/04 24 Dec 2004 Dec 24, 2004 (US default) 24 Dec 04 (EU default) Dec 24, 04 24 December 2004 December 24, 2004 24 December 04 December 24, 04 To change the date format 1. Press , select Set Date, and press Settings . 2. Use the arrow keys to select the date format and press . The display shows the currently set date. 3. Use the arrow keys to change each part of the date (month, day, year) and press after each part. Adding the Date to Your Label The date can be added as fixed text (the date remains the same) or as variable text that is automatically updated with the current date when the label is actually printed. To add the date 1. Press . Preview The currency key $ also uses RACE technology to scroll through a number of currency symbols: €£$¢¥ The order these symbols appear depends on the language you have selected. Adding Date and Time You can add the date and time to your labels. 10 Insert 2. Select Insert Date and press . 3. Select Fixed Date or Autom. Updated and press . When Autom. Updated is selected, a date icon is inserted on your label. When Fixed Date is selected, the actual date is inserted on your label in the format specified. Changing the Time Format Printing Multiple Copies You can choose to show the time in 12-hour format or 24-hour format. To set the time format 1. Press , select Set Time, and press . You can print up to 16 copies of a label at one time. When printing multiple copies, a dotted cut-line is printed between each label. To print multiple copies of the label 1. Press . Settings 2. Use the arrow keys to select the time format (24 Hour Clock or 12 Hour Clock) and press Settings . The display shows the default time. 2. Select Set # Copies and press . 3. Press the up arrow key to increase the number of copies to print. 3. Use the arrow keys to change each part of the time (hours and minutes) and press after each part. 4. Press the down arrow key to begin decreasing the number of copies from 16. 5. Press . Adding the Time to your Label 6. Press 1,2...n The time can be added as fixed text (the current time) or as variable text that is automatically updated with the current time when the label is actually printed. To add the time 1. Press . You may notice a brief pause in printing between each label for more complex formats. When printing is finished, the number of copies to print returns to the default value of 1. to begin printing. Serializing Your Labels Preview Insert 2. Select Insert Time and press . 3. Select Fixed Time or Autom. Updated and press . When Autom. Updated is selected, a time icon is inserted on your label. When Fixed Time is selected, the actual time is inserted on your label in the format specified. Printing Options You can print multiple copies of a label at one time, print serialized labels, print fixed-length labels, review label text and format, and adjust the printing contrast. You can print a series of labels with the last number incremented by one number. The number of labels serialized depends upon the number of copies you selected to print. Only the last series of numbers that follows any letter, space, or punctuation will be serialized. For example, abc123 will print as abc123, abc124, abc125; and 123-998 will print as 123-998, 123-999, 123-1000, and so on. To serialize your labels 1. Enter the text for your label. 2. Press Settings . 3. Select Set # Copies and press . 4. Press the up arrow key to increase the number of increments to print and press . 5. Press Shift + 1,2...n . The labels automatically print, each label incremented by one number. 11 Printing a Fixed-Length Label Normally, the length of the label is determined by the length of the text entered. However, you may wish to make a label for a specific purpose that is a fixed length regardless of the length of the text. You can specify a fixed length for a label in 0.1” (2 mm) increments between 1.5” (40 mm) and 15.0” (400 mm). The preset fixed length is 4” (100 mm). Any change you make to the fixedlength setting remains in effect until you change it. To set the label length 1. Press + . Shift 2. Press the up arrow to select Fixed Length On and then press . 3. Use the arrow keys to set the length. 4. Press . After you print the label, you must reset the fixedlength label setting to OFF; otherwise, all your subsequent labels will print with this fixed length. Adding Barcodes to Labels The labelmaker can print barcodes in six standard formats: UPC-A, UPC-E, EAN-8, EAN-13, CODE-39, and CODE-128. You can print a barcode on 3/4” (19 mm) and 1” (24 mm) labels; and you can print only one barcode per label. The barcode prints horizontally along the label with the text in small print underneath the barcode. You can optionally add text before and after the barcode. Or, you can add text above or below the barcode by creating a two-line label. See Creating Multi-Line Labels on page 8. Four of the standard barcodes require a fixed number of characters to generate the barcode: EAN-8, EAN-13, UPC-A, and UPC-E. CODE-39 and CODE-128 barcodes allow a variable number of characters to be entered. 12 To set the barcode type 1. Press . 2. Select Set Barcode and press . 3. Use the arrow keys to select the barcode type, and press . One or more question marks appear between the barcode symbols ( ). Settings ???????0 You may see a 0 in the far right position for some barcode types. This is a check digit and will be replaced with a number when the barcode data is entered. 4. Enter the data for the barcode, replacing the question marks, and press when finished. Once you select a barcode type, that setting remains until you select a different barcode type. To insert a barcode 1. Enter the text you wish to appear before the barcode on the label. (Optional) 2. Press Preview Insert . 3. Select Insert Barcode and press . 4. Enter any text you wish to appear after the barcode. (Optional) 5. Press 1,2...n . Previewing Your Label You can preview the text or format of your label prior to printing. A multi-line label is previewed as a single-line label. To preview your label 1. Press + . Preview Shift Insert 2. Select Text or Format, and then press . If you select Text, the text of the label scrolls across the display. If you select Format, the format selected displays briefly. Aligning the Text When you print a fixed length label you can choose to align the text at the left, center, or right side of the label. For multi-line labels, all lines of text are aligned left, center, and right relative to each other. To align the text 1. Press + . Shift 2. Use the arrow keys to select the desired alignment and press . The alignment setting remains active until you reset the alignment. You can choose to have each label automatically cut after printing or you can manually cut the labels using the key. By default, labels are cut automatically. When manual cutting is selected and you print multiple copies or serialized labels, a dotted cut-line is printed between each label. To change the cutting option 1. Press . Settings . 3. Select On or Off, and then press Storing Label Text The labelmaker automatically keeps the last fifteen labels printed in a text buffer. In addition, you can store up to ten specific labels you use frequently. To store the current label text 1. Press . Memory Changing the Cutting Option 2. Select Set Auto Cut and press • Automatically stores the last fifteen labels printed. • Allows you to store the text of up to ten labels you use frequently. • Allows you to name and store up to ten commonly used label formats. . 2. Select Save and then press . 3. Use the arrow keys to select Label and then press . Ten fields, which represent memory locations, are displayed. Fields that are filled indicate stored label text. You can store new text in any of the memory locations, however, if you select a location that is filled, the previous label text will be overwritten. 4. Select a memory location and press . This setting will remain until you change it. Your label text is saved and you are returned to the label. Adjusting the Print Contrast Storing Formats You can adjust the print contrast to fine tune the print quality of your label. To set the contrast 1. Press . In addition to label text, you can store up to ten specific label formats you use frequently. This feature stores only the formatting information not the label text. To store the current format 1. Press . Settings 2. Select Set Contrast and press 3. Select a contrast setting and press . . Using Labelmaker Memory The labelmaker has a powerful memory feature that stores text and formatting as follows: Memory 2. Select Save and press 3. Select Format and press . . Ten fields, which represent memory locations, are displayed. Fields that contain formats display a name in the field. You can store new 13 formats in any of the fields, however, if you select a location that is filled, the previous label format will be overwritten. 4. Select a field and press . The word Name? appears in the field. 5. Enter a name for the format and press . Your label format is saved and you are returned to the label. Recalling Stored Labels and Formats You can easily recall labels and formats stored in memory to use at a later time. To recall labels or formats 1. Press . Memory 2. Select Recall and then Label, Format, or Last Printed. 5. When you are able to access both sides of the blade, release the keys. 6. Use a cotton ball and alcohol to clean both sides of the cutter blade. The cutter blade is extremely sharp. Use caution when cleaning. 7. After cleaning the blade, press to return the blade to its home position. You can also follow this procedure if the cutter blade becomes lodged in the forward position and will not move. To clean the print head ♦ Clean the print head using the cleaning tool located inside the label cassette compartment lid. See Figure 11. A list of memory locations is displayed similar to storing a label or format. 3. Select a label or format to recall and press . Caring for Your Labelmaker Your labelmaker is designed to give you long and trouble-free service, while requiring very little maintenance. Clean your labelmaker from time to time to keep it working properly. Clean the cutter blade each time you replace the label cassette. To clean the cutter blade 1. Press A to turn off the power. 2. Open label cassette compartment and remove cassette. 3. Press and then A together. The message, Cut Test, appears on the display. 4. While holding down the key, repeatedly press . The cutter blade will move into view in small steps. Shift 14 Figure 11 Troubleshooting Review the following possible solutions if you encounter a problem while using your labelmaker. Problem/Error Message Solution No display • Ensure the labelmaker is turned on. • Replace discharged batteries. Poor Print Quality • • • • Replace discharged batteries or attach power adapter. Ensure label cassette is installed properly. Clean the print head. Replace the label cassette. Poor Cutter Performance Clean the cutter blade. See Caring for Your Labelmaker. Printing No action required. Message disappears when printing is finished. Too many characters Exceeded maximum number of characters in buffer. Delete some or all of the buffer text. Too many lines Exceeded maximum number of lines allowed. Select another format. Insert Tape Cassette Label cassette missing or empty. Insert a new label cassette Battery low Batteries almost discharged. Replace batteries or connect AC power adapter. Tape Jam Motor is stalled due to label jam. • Remove jammed label and replace label cassette. • Clean cutter blade. Too many pages Exceeded maximum number of format breaks allowed. Change label layout. Page not empty Delete all content on the page. Tape size too small Change label size or change the formatting on the label. Set Fixed-length label selected and the length necessary to print the label exceeds the selected length. • Following this message, a fixed-length value is displayed which indicates the minimum label length necessary to fit the text. Do one of the following: • Adjust the fixed-length label setting appropriately, or • Select a narrower font size. If you still need assistance, contact DYMO Customer Support for your country. Refer to Contacting Customer Support on the inside back cover to locate the contact number for your country. 15 Documentation Feedback We are constantly working to produce the highest quality documentation for our products. We welcome your feedback. Send us your comments or suggestions about our user guides. Please include the following information with your feedback: • Product name, model number, and User Guide page number • Brief description of content (instructions that are inaccurate or unclear, areas where more detail is needed, and so on) We also welcome your suggestions about additional topics you would like to see covered in the documentation. Send email messages to: firstname.lastname@example.org Please keep in mind that this email address is only for documentation feedback. If you have a technical question, please contact Customer Support. This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the following international standards: US FCC Class B Compatibility Safety – UL, CUL, TUV, CE, T-Mark, SAA, BABT, C-Tick EMC - EMI Compatibility EN 55022; EN 61000 (+ addendums) Esselte is an ISO 14001 registered company. Plastic components of this printer have been marked to enable final disposal in a manner that is sensitive to the environment. 16 Contacting Customer Support The following table provides a list of telephone numbers to reach DYMO Sales and Support departments. You can also reach DYMO at www.dymo.com. Country Telephone Fax Australia 1800/ 633 868 1800/ 817 558 Canada (800) 263-6105 (905) 890-2347 Mexico +01 5368 2066 New Zealand 0800 803 966 United States (203) 588-2500 0800 737 212 DYMO Corporation 44 Commerce Road Stamford, CT 06902-4561 (203) 355-9000 © 2005 DYMO Corporation. All Rights Reserved. 04/05 No part of this document may be reproduced or transmitted in any form or by any means or translated into another language without the prior written consent of DYMO Corporation. ExecuLabel is a trademark of DYMO Corporation. DYMO is a registered trademark of Esselte Corporation. All other trademarks are the property of their respective holders.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project